Don't use create_wrapper to short-circuit interpretters

Hi,

create_wrapper was previously abused to invoke the Python/Perl interpretters directly instead of relying on #! parsing, which is read into a 128 byte buffer so breaks with deep build directories.

The new create_wrapper is stricter about it's input so this trick doesn't work anymore. Luckily there's already a "nativeperl" binary in the sysroot's /usr/bin, so by adding a "nativepython" alongside it[1] recipes that used create_wrapper can be changed to munge the #! line to e.g. /usr/bin/env nativeperl.

(this series obsoletes 3 of the patches that Saul sent earlier involve create_wrapper)

Ross

[1] The existing nativeperl is a wrapper, the new nativepython is a symlink. Both seem to work and I can't see a good reason for a wrapper instead of a relative symlink.

The following changes since commit b87429fdb45f82ebe4060fea8c4ecd6e4bc1ae52:

bitbake: Add missing file that went out of sync (2013-06-12 13:13:21 +0100)

are available in the git repository at:

git://git.yoctoproject.org/poky-contrib ross/wrap

for you to fetch changes up to 8237763ebcc3cfe4388690056a7c0fed8d65a6c2:

gnome-doc-utils: drop the usage of create_wrapper (2013-06-12 17:44:39 +0100)

----------------------------------------------------------------
Ross Burton (4):
dpkg: drop the usage of create_wrapper
python-native: add nativepython symlink
createrepo: drop the usage of create_wrapper
gnome-doc-utils: drop the usage of create_wrapper

 meta/recipes-devtools/dpkg/dpkg.inc                  |   10 +---------
 meta/recipes-devtools/python/python-native_2.7.3.bb  |    6 ++++++
 meta/recipes-gnome/gnome/gnome-doc-utils.inc         |    2 +-
 meta/recipes-support/createrepo/createrepo_0.4.11.bb |    2 +-
 4 files changed, 9 insertions(+), 11 deletions(-)

Ross Burton (4):
dpkg: drop the usage of create_wrapper
python-native: add nativepython symlink
createrepo: drop the usage of create_wrapper
gnome-doc-utils: drop the usage of create_wrapper

 meta/recipes-devtools/dpkg/dpkg.inc                  |   10 +---------
 meta/recipes-devtools/python/python-native_2.7.3.bb  |    6 ++++++
 meta/recipes-gnome/gnome/gnome-doc-utils.inc         |    2 +-
 meta/recipes-support/createrepo/createrepo_0.4.11.bb |    2 +-
 4 files changed, 9 insertions(+), 11 deletions(-)

1.7.10.4

create_wrapper was previously abused to invoke the Perl interpretter directly instead of relying on #! parsing, which is read into a 128 byte buffer so breaks with deep build directories.

However we already install a "nativeperl" binary into the native sysroot, so use sed to change the #! line to /usr/bin/env nativeperl.

---
 meta/recipes-devtools/dpkg/dpkg.inc |   10 +---------
 1 file changed, 1 insertion(+), 9 deletions(-)

index 28c4f89..b9d4da1 100644
@@ -45,21 +45,13 @@ do_install_append () {
 	if [ "${PN}" = "dpkg-native" ]; then
 		# update-alternatives doesn't have an offline mode
 		rm ${D}${bindir}/update-alternatives
+		sed -i -e 's|^#!.*${bindir}/perl-native.*/perl|#!/usr/bin/env nativeperl|' ${D}${bindir}/dpkg-*
 	else
 		mv ${D}${bindir}/update-alternatives ${D}${sbindir}
 		sed -i -e 's|^#!.*${bindir}/perl-native.*/perl|#!/usr/bin/env perl|' ${D}${bindir}/dpkg-*
 	fi
 }
 
-# Create a wrapper for the perl script to avoid the "bad interpreter"
-# error when the tmpdir is longer than 150.
-do_install_append_class-native () {
-	tmp=`find ${D}${bindir} -type f -exec grep -m 1 -l '#!/.*/perl-native/perl' {} \;`
-	for i in $tmp; do
-		create_wrapper $i ${STAGING_BINDIR_NATIVE}/perl-native/perl
-	done
-}
-
 pkg_postinst_${PN} () {
 #!/bin/sh
 if [ "x$D" != "x" ] && [ -f $D/var/lib/dpkg/status ]; then

1.7.10.4

Add a symlink to the native Python so that scripts can just invoke "nativepython" and get the right one without needing absolute paths (these often end up too long for the #! parser in the kernel as the buffer is 128 bytes long).

The name "nativepython" was chosen to match the existing "nativeperl" which serves the same purpose.

---
 meta/recipes-devtools/python/python-native_2.7.3.bb |    6 ++++++
 1 file changed, 6 insertions(+)

index 722d92c..39d53bb 100644
@@ -48,4 +48,10 @@ do_install() {
 	for PYTHSCRIPT in `grep -rIl ${bindir}/${PN}/python ${D}${bindir}/${PN}`; do
 		sed -i -e '1s|^#!.*|#!/usr/bin/env python|' $PYTHSCRIPT
 	done
+
+	# Add a symlink to the native Python so that scripts can just invoke
+	# "nativepython" and get the right one without needing absolute paths
+	# (these often end up too long for the #! parser in the kernel as the
+	# buffer is 128 bytes long).
+	ln -s python-native/python ${D}${bindir}/nativepython
 }

1.7.10.4

create_wrapper was previously abused to invoke the Python interpretter directly instead of relying on #! parsing, which is read into a 128 byte buffer so breaks with deep build directories.

However now that we already install a "nativepython" binary into the native sysroot, use sed to change the #! line to /usr/bin/env nativepython.

---
 meta/recipes-support/createrepo/createrepo_0.4.11.bb |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index c977c2e..523d31b 100644
@@ -35,7 +35,7 @@ do_install_append_class-native () {
 	for i in ${D}${datadir}/createrepo/genpkgmetadata.py \
 		 ${D}${datadir}/createrepo/modifyrepo.py \
 		 ${D}${bindir}/rpm-createsolvedb.py ; do
-		create_wrapper $i ${STAGING_BINDIR_NATIVE}/python-native/python
+		sed -i -e 's|^#!.*/usr/bin/env python|#! /usr/bin/env nativepython|' $i
 	done
 
 	create_wrapper ${D}/${bindir}/createrepo \

1.7.10.4

create_wrapper was previously abused to invoke the Python interpretter directly instead of relying on #! parsing, which is read into a 128 byte buffer so breaks with deep build directories.

However now that we already install a "nativepython" binary into the native sysroot, use sed to change the #! line to /usr/bin/env nativepython.

---
 meta/recipes-gnome/gnome/gnome-doc-utils.inc |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index 9d243a1..b0433ad 100644
@@ -20,7 +20,7 @@ do_install_append() {
 }
 
 do_install_append_class-native () {
-	create_wrapper ${D}${bindir}/xml2po ${STAGING_BINDIR_NATIVE}/python-native/python
+	sed -i -e 's|^#!.*/usr/bin/env python|#! /usr/bin/env nativepython|' ${D}${bindir}/xml2po
 }
 
 FILES_${PN} += "${datadir}/xml* ${PYTHON_SITEPACKAGES_DIR}/*"

1.7.10.4