xinput-calibrator: move it from meta-oe to oe-core
cover xinput-calibrator: move it from meta-oe to oe-core
The following changes since commit 7abcaf14ec9cd760fe94c777f0cd8426163de2c5:
oe-buildenv-internal: Fix exit verses return (2013-06-17 10:41:01 +0100)
are available in the git repository at:
git://git.yoctoproject.org/poky-contrib lpalcu/xinput-calibrator_oe-core
http://git.yoctoproject.org/cgit.cgi/poky-contrib/log/?h=lpalcu/xinput-calibrator_oe-core
Laurentiu Palcu (1):
xinput-calibrator: move it from meta-oe to oe-core
.../pointercal-xinput/pointercal.xinput | 1 + .../xinput-calibrator/pointercal-xinput_0.0.bb | 17 ++++++++ .../xinput-calibrator/xinput-calibrator.service | 11 ++++++ .../xinput-calibrator/xinput-calibrator_git.bb | 41 ++++++++++++++++++++ 4 files changed, 70 insertions(+) create mode 100644 meta/recipes-graphics/xinput-calibrator/pointercal-xinput/pointercal.xinput create mode 100644 meta/recipes-graphics/xinput-calibrator/pointercal-xinput_0.0.bb create mode 100644 meta/recipes-graphics/xinput-calibrator/xinput-calibrator/xinput-calibrator.service create mode 100644 meta/recipes-graphics/xinput-calibrator/xinput-calibrator_git.bb
Signature · 1 line
1.7.9.5
PATCH 1/1 xinput-calibrator: move it from meta-oe to oe-core
People using xserver-xorg that need to calibrate their touchscreen devices would also need meta-oe. Bringing the recipes to oe-core will make it easier for them.
Aditionaly, drop xterm RDEPENDS. Terminal is not needed to run the menu item.
[YOCTO #4416]
--- .../pointercal-xinput/pointercal.xinput | 1 + .../xinput-calibrator/pointercal-xinput_0.0.bb | 17 ++++++++ .../xinput-calibrator/xinput-calibrator.service | 11 ++++++ .../xinput-calibrator/xinput-calibrator_git.bb | 41 ++++++++++++++++++++ 4 files changed, 70 insertions(+) create mode 100644 meta/recipes-graphics/xinput-calibrator/pointercal-xinput/pointercal.xinput create mode 100644 meta/recipes-graphics/xinput-calibrator/pointercal-xinput_0.0.bb create mode 100644 meta/recipes-graphics/xinput-calibrator/xinput-calibrator/xinput-calibrator.service create mode 100644 meta/recipes-graphics/xinput-calibrator/xinput-calibrator_git.bb
meta/recipes-graphics/xinput-calibrator/pointercal-xinput/pointercal.xinput new file +1 -0
@@ -0,0 +1 @@ +# replace with valid machine specific pointercal.xinput
meta/recipes-graphics/xinput-calibrator/pointercal-xinput_0.0.bb new file +17 -0
@@ -0,0 +1,17 @@ +DESCRIPTION = "Touchscreen calibration data from xinput-calibrator" +LICENSE = "MIT" +LIC_FILES_CHKSUM = "file://${COREBASE}/meta/COPYING.MIT;md5=3da9cfbcb788c80a0384361b4de20420" + +SRC_URI = "file://pointercal.xinput" +S = "${WORKDIR}" + +do_install() { + # Only install file if it has a contents + if [ -s ${S}/pointercal.xinput ]; then + install -d ${D}${sysconfdir}/ + install -m 0644 ${S}/pointercal.xinput ${D}${sysconfdir}/ + fi +} + +PACKAGE_ARCH = "${MACHINE_ARCH}" +CONFFILES_${PN} = "${sysconfdir}/pointercal.xinput"
meta/recipes-graphics/xinput-calibrator/xinput-calibrator/xinput-calibrator.service new file +11 -0
@@ -0,0 +1,11 @@ +[Unit] +Description=Loads xinput calibration data +ConditionPathExists=/etc/pointercal.xinput +Requires=display-manager.service +After=display-manager.service + +[Service] +ExecStart=/usr/bin/xinput_calibrator_once.sh + +[Install] +WantedBy=multi-user.target
meta/recipes-graphics/xinput-calibrator/xinput-calibrator_git.bb new file +41 -0
41 lines not on this page · raw message
Signature · 1 line
1.7.9.5
Quoted 6 lines · Laurentiu Palcu
People using xserver-xorg that need to calibrate their touchscreen devices would also need meta-oe. Bringing the recipes to oe-core will make it easier for them.
Aditionaly, drop xterm RDEPENDS. Terminal is not needed to run the menu item.
I don't really like how there's a xdg-autostart desktop file and a systemd service file for loading the calibration and performing calibration - a single xsession file as xtscal does will be sufficient and actually work in Sato as it can block the rest of the UI before continuing.
Also persistent calibration doesn't work with non-root X users, so maybe the tool should use ~/.pointercal.xinput if it can't write to /etc.
Apart from that I've got a touchscreen that isn't X-axis-reversed now. :)
Ross
Quoted 5 lines · Ross
Quoted 4 lines · Laurentiu Palcu
People using xserver-xorg that need to calibrate their touchscreen devices would also need meta-oe. Bringing the recipes to oe-core will make it easier for them.
Quoted 8 lines
Quoted 2 lines
Aditionaly, drop xterm RDEPENDS. Terminal is not needed to run the menu item.
I don't really like how there's a xdg-autostart desktop file and a systemd service file for loading the calibration and performing calibration - a single xsession file as xtscal does will be sufficient and actually work in Sato as it can block the rest of the UI before continuing.
I'm not sure I understand what's wrong with using xdg-autostart. Xsession parses each .desktop file in xdg/autostart and executes the application listed in 'Exec'. Having a separate xsession file created in /etc/X11/Xsession.d (like xtscal does) is, basically, the same thing. Only the moment of execution differs. Or, maybe, I misunderstood your point.
Quoted 4 lines
Also persistent calibration doesn't work with non-root X users, so maybe the tool should use ~/.pointercal.xinput if it can't write to /etc.
We could easily change xinput_calibrator_once.sh to save/read the calibration data either to/from /etc or ~.
Laurentiu
Quoted 4 lines
Apart from that I've got a touchscreen that isn't X-axis-reversed now. :)
Ross
Quoted 6 lines · Laurentiu Palcu
I'm not sure I understand what's wrong with using xdg-autostart. Xsession parses each .desktop file in xdg/autostart and executes the application listed in 'Exec'. Having a separate xsession file created in
/etc/X11/Xsession.d(like xtscal does) is, basically, the same thing. Only the moment of execution differs. Or, maybe, I misunderstood your point.
XDG autostart doesn't block the app, so the rest of the system starts up. Really calibration should pause the startup and only when the input is calibrated, continue.
Ross
v2 cover xinput-calibrator: move it from meta-oe to oe-core
In reply to Laurentiu PalcuChanges in v2:
* run calibration through xsession file;
* allow normal user to write his calibration data to ~/.pointercal/pointercal.xinput and then use it when system boots;
Laurentiu
The following changes since commit 80b263430453896189b704d0997943642eec6fef:
classes/insane: remove la2 check which no longer exists from ERROR_QA (2013-06-28 16:33:08 +0100)
are available in the git repository at:
git://git.yoctoproject.org/poky-contrib lpalcu/xinput-calibrator_oe-core
http://git.yoctoproject.org/cgit.cgi/poky-contrib/log/?h=lpalcu/xinput-calibrator_oe-core
Laurentiu Palcu (1):
xinput-calibrator: move it from meta-oe to oe-core
.../pointercal-xinput/pointercal.xinput | 1 + .../xinput-calibrator/pointercal-xinput_0.0.bb | 17 +++++ .../xinput-calibrator/30xinput_calibrate.sh | 7 +++ ...t_calibrator_pointercal.sh-to-be-run-as-n.patch | 66 ++++++++++++++++++++ .../xinput-calibrator/xinput-calibrator_git.bb | 34 ++++++++++ 5 files changed, 125 insertions(+) create mode 100644 meta/recipes-graphics/xinput-calibrator/pointercal-xinput/pointercal.xinput create mode 100644 meta/recipes-graphics/xinput-calibrator/pointercal-xinput_0.0.bb create mode 100644 meta/recipes-graphics/xinput-calibrator/xinput-calibrator/30xinput_calibrate.sh create mode 100644 meta/recipes-graphics/xinput-calibrator/xinput-calibrator/Allow-xinput_calibrator_pointercal.sh-to-be-run-as-n.patch create mode 100644 meta/recipes-graphics/xinput-calibrator/xinput-calibrator_git.bb
Signature · 1 line
1.7.9.5
PATCH v2 1/1 xinput-calibrator: move it from meta-oe to oe-core
People using xserver-xorg that need to calibrate their touchscreen devices would also need meta-oe. Bringing the recipes to oe-core will make it easier for them.
Aditionaly:
* drop xterm RDEPENDS. Terminal is not needed to run the menu item;
* change xinput_calibrator_pointercal.sh so that it can be run as normal user: pointercal.xinput is saved to ~/.pointercal/ and it will be used when the system boots;
* have the calibration run through an Xsession file;
* remove the systemd service since calibration is run by Xsession;
[YOCTO #4416]
--- .../pointercal-xinput/pointercal.xinput | 1 + .../xinput-calibrator/pointercal-xinput_0.0.bb | 17 +++++ .../xinput-calibrator/30xinput_calibrate.sh | 7 +++ ...t_calibrator_pointercal.sh-to-be-run-as-n.patch | 66 ++++++++++++++++++++ .../xinput-calibrator/xinput-calibrator_git.bb | 34 ++++++++++ 5 files changed, 125 insertions(+) create mode 100644 meta/recipes-graphics/xinput-calibrator/pointercal-xinput/pointercal.xinput create mode 100644 meta/recipes-graphics/xinput-calibrator/pointercal-xinput_0.0.bb create mode 100644 meta/recipes-graphics/xinput-calibrator/xinput-calibrator/30xinput_calibrate.sh create mode 100644 meta/recipes-graphics/xinput-calibrator/xinput-calibrator/Allow-xinput_calibrator_pointercal.sh-to-be-run-as-n.patch create mode 100644 meta/recipes-graphics/xinput-calibrator/xinput-calibrator_git.bb
meta/recipes-graphics/xinput-calibrator/pointercal-xinput/pointercal.xinput new file +1 -0
@@ -0,0 +1 @@ +# replace with valid machine specific pointercal.xinput
meta/recipes-graphics/xinput-calibrator/pointercal-xinput_0.0.bb new file +17 -0
@@ -0,0 +1,17 @@ +DESCRIPTION = "Touchscreen calibration data from xinput-calibrator" +LICENSE = "MIT" +LIC_FILES_CHKSUM = "file://${COREBASE}/meta/COPYING.MIT;md5=3da9cfbcb788c80a0384361b4de20420" + +SRC_URI = "file://pointercal.xinput" +S = "${WORKDIR}" + +do_install() { + # Only install file if it has a contents + if [ -s ${S}/pointercal.xinput ]; then + install -d ${D}${sysconfdir}/ + install -m 0644 ${S}/pointercal.xinput ${D}${sysconfdir}/ + fi +} + +PACKAGE_ARCH = "${MACHINE_ARCH}" +CONFFILES_${PN} = "${sysconfdir}/pointercal.xinput"
meta/recipes-graphics/xinput-calibrator/xinput-calibrator/30xinput_calibrate.sh new file +7 -0
@@ -0,0 +1,7 @@ +#!/bin/sh + +. /etc/formfactor/config + +if [ "$HAVE_TOUCHSCREEN" = "1" ]; then + /usr/bin/xinput_calibrator_once.sh +fi
meta/recipes-graphics/xinput-calibrator/xinput-calibrator/Allow-xinput_calibrator_pointercal.sh-to-be-run-as-n.patch new file +66 -0
66 lines not on this page · raw message
meta/recipes-graphics/xinput-calibrator/xinput-calibrator_git.bb new file +34 -0
@@ -0,0 +1,34 @@ +DESCRIPTION = "A generic touchscreen calibration program for X.Org" +HOMEPAGE = "http://www.freedesktop.org/wiki/Software/xinput_calibrator" +LICENSE = "MIT-X" +LIC_FILES_CHKSUM = "file://src/calibrator.cpp;endline=22;md5=1bcba08f67cdb56f34021557898e4b5a" +DEPENDS = "virtual/libx11 libxi" + +PV = "0.7.5+git${SRCPV}" + +inherit autotools systemd + +SRCREV = "c01c5af807cb4b0157b882ab07a893df9a810111" +SRC_URI = "git://github.com/tias/xinput_calibrator.git;protocol=git \ + file://30xinput_calibrate.sh \ + file://Allow-xinput_calibrator_pointercal.sh-to-be-run-as-n.patch" + +S = "${WORKDIR}/git" + +# force native X11 ui as we don't have gtk+ in DEPENDS +EXTRA_OECONF += "--with-gui=x11" + +do_install_append() { + install -d ${D}${bindir} + install -m 0755 scripts/xinput_calibrator_pointercal.sh ${D}${bindir}/xinput_calibrator_once.sh + + install -d ${D}${sysconfdir}/X11/Xsession.d/ + install -m 0755 ${WORKDIR}/30xinput_calibrate.sh ${D}${sysconfdir}/X11/Xsession.d/ +} + +RDEPENDS_${PN} = "xinput" +RRECOMMENDS_${PN} = "pointercal-xinput" + +RPROVIDES_${PN} += "${PN}-systemd" +RREPLACES_${PN} += "${PN}-systemd" +RCONFLICTS_${PN} += "${PN}-systemd"
Signature · 1 line
1.7.9.5
meta/recipes-graphics/xinput-calibrator/pointercal-xinput_0.0.bb line 14
Quoted 7 lines · Laurentiu Palcu
meta/recipes-graphics/xinput-calibrator/pointercal-xinput_0.0.bb new file +7
-0+do_install() { + # Only install file if it has a contents + if [ -s ${S}/pointercal.xinput ]; then + install -d ${D}${sysconfdir}/ + install -m 0644 ${S}/pointercal.xinput ${D}${sysconfdir}/ + fi +}
The file always has content because the file in the main recipe has a comment in. Personally I think not installing a useless file is the right thing to do, so we should change the default pointercal.xinput to be empty.
Relatedly, interestingly Weston has a different approach and attaches the calibration to the device using udev properties, which means systems where touch devices can be hotplugged actually work. I'm incredibly tempted to extend xinput-calibrator to write out udev fragments and make Xi respect them if they exist...
Quoted 2 lines
+++ b/meta/recipes-graphics/xinput-calibrator/xinput-calibrator_git.bb +inherit autotools systemd
systemd?
meta/recipes-graphics/xinput-calibrator/xinput-calibrator_git.bb line 34
Quoted 3 lines
meta/recipes-graphics/xinput-calibrator/xinput-calibrator_git.bb new file +3
-0+RPROVIDES_${PN} += "${PN}-systemd" +RREPLACES_${PN} += "${PN}-systemd" +RCONFLICTS_${PN} += "${PN}-systemd"
It doesn't anymore, so these can be dropped.
Ross
Quoted 13 lines · Ross
meta/recipes-graphics/xinput-calibrator/pointercal-xinput_0.0.bb line 14
Quoted 7 lines · Laurentiu Palcu
meta/recipes-graphics/xinput-calibrator/pointercal-xinput_0.0.bb new file +7
-0+do_install() { + # Only install file if it has a contents + if [ -s ${S}/pointercal.xinput ]; then + install -d ${D}${sysconfdir}/ + install -m 0644 ${S}/pointercal.xinput ${D}${sysconfdir}/ + fi +}The file always has content because the file in the main recipe has a comment in. Personally I think not installing a useless file is the right thing to do, so we should change the default pointercal.xinput to be empty.
Then why install it at all if it's empty? I believe a zero sized file in /etc it's even worse.
Quoted 6 lines
Relatedly, interestingly Weston has a different approach and attaches the calibration to the device using udev properties, which means systems where touch devices can be hotplugged actually work. I'm incredibly tempted to extend xinput-calibrator to write out udev fragments and make Xi respect them if they exist...
Ross, you requested (according to the description in bugzilla:
https://bugzilla.yoctoproject.org/show_bug.cgi?id=4416#c0 ) to just move xinput-calibrator to oe-core from meta-oe. Technically, the first patchset did just that. It would have been easier for me, from the planning point of view at least, if I had known in advance the additional changes you needed for this package. I admit I don't know how all packages in oe-core or meta-oe should or shouldn't work... I'm working on improving that though. ;)
So, perhaps it would be better for all of us if you documented all these additional change requests in bugzilla. Would that be OK with you?
Quoted 5 lines
Quoted 3 lines
+++ b/meta/recipes-graphics/xinput-calibrator/xinput-calibrator_git.bb +inherit autotools systemd
systemd?
Will be removed
Quoted 6 lines
meta/recipes-graphics/xinput-calibrator/xinput-calibrator_git.bb line 34
Quoted 4 lines
meta/recipes-graphics/xinput-calibrator/xinput-calibrator_git.bb new file +3
-0+RPROVIDES_${PN} += "${PN}-systemd" +RREPLACES_${PN} += "${PN}-systemd" +RCONFLICTS_${PN} += "${PN}-systemd"It doesn't anymore, so these can be dropped.
Ack
Laurentiu
Quoted 6 lines · Laurentiu Palcu
Quoted 4 lines
The file always has content because the file in the main recipe has a comment in. Personally I think not installing a useless file is the right thing to do, so we should change the default pointercal.xinput to be empty.
Then why install it at all if it's empty? I believe a zero sized file in /etc it's even worse.
Exactly, this test will spot the empty file and not install it.
Quoted 6 lines
Quoted 5 lines
Relatedly, interestingly Weston has a different approach and attaches the calibration to the device using udev properties, which means systems where touch devices can be hotplugged actually work. I'm incredibly tempted to extend xinput-calibrator to write out udev fragments and make Xi respect them if they exist...
Quoted 8 lines
Ross, you requested (according to the description in bugzilla:
https://bugzilla.yoctoproject.org/show_bug.cgi?id=4416#c0 ) to just move xinput-calibrator to oe-core from meta-oe. Technically, the first patchset did just that. It would have been easier for me, from the planning point of view at least, if I had known in advance the additional changes you needed for this package. I admit I don't know how all packages in oe-core or meta-oe should or shouldn't work... I'm working on improving that though. ;)
My talk of udev properties is just talk, I should have made that
clear: it's nothing I expect you to do. Once the systemd bits are purged entirely, I'm happy to see this merged.
Cheers,
Ross
Quoted 25 lines · Ross
meta/recipes-graphics/xinput-calibrator/pointercal-xinput_0.0.bb line 14
Quoted 7 lines · Laurentiu Palcu
meta/recipes-graphics/xinput-calibrator/pointercal-xinput_0.0.bb new file +7
-0+do_install() { + # Only install file if it has a contents + if [ -s ${S}/pointercal.xinput ]; then + install -d ${D}${sysconfdir}/ + install -m 0644 ${S}/pointercal.xinput ${D}${sysconfdir}/ + fi +}The file always has content because the file in the main recipe has a comment in. Personally I think not installing a useless file is the right thing to do, so we should change the default pointercal.xinput to be empty.
Relatedly, interestingly Weston has a different approach and attaches the calibration to the device using udev properties, which means systems where touch devices can be hotplugged actually work. I'm incredibly tempted to extend xinput-calibrator to write out udev fragments and make Xi respect them if they exist...
Quoted 2 lines
+++ b/meta/recipes-graphics/xinput-calibrator/xinput-calibrator_git.bb +inherit autotools systemd
systemd?
Quoted 5 lines
meta/recipes-graphics/xinput-calibrator/xinput-calibrator_git.bb line 34
Quoted 3 lines
meta/recipes-graphics/xinput-calibrator/xinput-calibrator_git.bb new file +3
-0+RPROVIDES_${PN} += "${PN}-systemd" +RREPLACES_${PN} += "${PN}-systemd" +RCONFLICTS_${PN} += "${PN}-systemd"It doesn't anymore, so these can be dropped.
That means that xinput-calibrator-systemd will stay installed on devices which already have it.
Signature · 1 line
Martin 'JaMa' Jansa jabber: [email protected]
Quoted 6 lines · On Tuesday 02 July 2013 18:50:27 Martin Jansa wrote:
Quoted 5 lines · Ross
Quoted 2 lines
+++ b/meta/recipes-graphics/xinput-calibrator/xinput-calibrator_git.bb +inherit autotools systemd
systemd?
Quoted 8 lines
Quoted 5 lines
meta/recipes-graphics/xinput-calibrator/xinput-calibrator_git.bb line 34
Quoted 3 lines
meta/recipes-graphics/xinput-calibrator/xinput-calibrator_git.bb new file +3
-0+RPROVIDES_${PN} += "${PN}-systemd" +RREPLACES_${PN} += "${PN}-systemd" +RCONFLICTS_${PN} += "${PN}-systemd"It doesn't anymore, so these can be dropped.
That means that xinput-calibrator-systemd will stay installed on devices which already have it.
I'd suggest solving that with a bbappend in meta-systemd as with the rest of these.
Cheers,
Paul
Signature · 2 lines
Paul Eggleton Intel Open Source Technology Centre
v3 cover xinput-calibrator: move it from meta-oe to oe-core (cover letter only)
In reply to Laurentiu PalcuChanges in v3:
* do not install pointercal.xinput if it's the default one;
Changes in v2:
* run calibration through xsession file;
* allow normal user to write his calibration data to ~/.pointercal/pointercal.xinput and then use it when system boots;
Laurentiu
The following changes since commit a63229917a5708de2d161aba0d67168ce0da6365:
meta-yocto-bsp: update reference board SRCREVs (2013-07-10 09:45:51 +0100)
are available in the git repository at:
git://git.yoctoproject.org/poky-contrib lpalcu/xinput-calibrator_oe-core_v3
http://git.yoctoproject.org/cgit.cgi/poky-contrib/log/?h=lpalcu/xinput-calibrator_oe-core_v3
Laurentiu Palcu (1):
xinput-calibrator: move it from meta-oe to oe-core
.../pointercal-xinput/pointercal.xinput | 1 + .../xinput-calibrator/pointercal-xinput_0.0.bb | 18 ++++++ .../xinput-calibrator/30xinput_calibrate.sh | 7 +++ ...t_calibrator_pointercal.sh-to-be-run-as-n.patch | 66 ++++++++++++++++++++ .../xinput-calibrator/xinput-calibrator_git.bb | 30 +++++++++ 5 files changed, 122 insertions(+) create mode 100644 meta/recipes-graphics/xinput-calibrator/pointercal-xinput/pointercal.xinput create mode 100644 meta/recipes-graphics/xinput-calibrator/pointercal-xinput_0.0.bb create mode 100644 meta/recipes-graphics/xinput-calibrator/xinput-calibrator/30xinput_calibrate.sh create mode 100644 meta/recipes-graphics/xinput-calibrator/xinput-calibrator/Allow-xinput_calibrator_pointercal.sh-to-be-run-as-n.patch create mode 100644 meta/recipes-graphics/xinput-calibrator/xinput-calibrator_git.bb
Signature · 1 line
1.7.9.5
Re: [PATCH v3 0/1] xinput-calibrator: move it from meta-oe to oe-core (cover letter only)
Hi Laurentiu,
Quoted 7 lines · On Friday 12 July 2013 15:04:02 Laurentiu Palcu wrote:
Changes in v3:
* do not install pointercal.xinput if it's the default one;Changes in v2:
* run calibration through xsession file;
* allow normal user to write his calibration data to
~/.pointercal/pointercal.xinput and then use it when system boots;
I'm not sure if you saw, but I noticed when this was in Saul's consolidated pull that this drops PR (previous value was "r6"). I know it seems trivial but we're not increasing PV so if we hope to supersede the recipe from meta-oe, this will have to be preserved. Same goes for pointercal-xinput which had a PR value of "r4". Thus, this patch hasn't yet been merged.
Could you send a v4 which restores these?
Thanks,
Paul
Signature · 2 lines
Paul Eggleton Intel Open Source Technology Centre
v4 cover xinput-calibrator: move it from meta-oe to oe-core (cover letter only)
In reply to Laurentiu PalcuChanges in v4:
* restore original PR for both recipes;
Changes in v3:
* do not install pointercal.xinput if it's the default one;
Changes in v2:
* run calibration through xsession file;
* allow normal user to write his calibration data to ~/.pointercal/pointercal.xinput and then use it when system boots;
Laurentiu
The following changes since commit 31e6eee860b5f9f4ac9ef0889bcff5648de6e3f9:
poky-tiny.conf: blacklist core-image-weston option (2013-07-18 21:26:58 +0100)
are available in the git repository at:
git://git.yoctoproject.org/poky-contrib lpalcu/xinput-calibrator_oe-core_v4
http://git.yoctoproject.org/cgit.cgi/poky-contrib/log/?h=lpalcu/xinput-calibrator_oe-core_v4
Laurentiu Palcu (1):
xinput-calibrator: move it from meta-oe to oe-core
.../pointercal-xinput/pointercal.xinput | 1 + .../xinput-calibrator/pointercal-xinput_0.0.bb | 20 ++++++ .../xinput-calibrator/30xinput_calibrate.sh | 7 +++ ...t_calibrator_pointercal.sh-to-be-run-as-n.patch | 66 ++++++++++++++++++++ .../xinput-calibrator/xinput-calibrator_git.bb | 31 +++++++++ 5 files changed, 125 insertions(+) create mode 100644 meta/recipes-graphics/xinput-calibrator/pointercal-xinput/pointercal.xinput create mode 100644 meta/recipes-graphics/xinput-calibrator/pointercal-xinput_0.0.bb create mode 100644 meta/recipes-graphics/xinput-calibrator/xinput-calibrator/30xinput_calibrate.sh create mode 100644 meta/recipes-graphics/xinput-calibrator/xinput-calibrator/Allow-xinput_calibrator_pointercal.sh-to-be-run-as-n.patch create mode 100644 meta/recipes-graphics/xinput-calibrator/xinput-calibrator_git.bb
Signature · 1 line
1.7.9.5