Skip to contentSkip to conversation

meta-yocto-bsp: 3.10 updates

PATCH In review Bruce Ashfield 2 participants 10 messages Sep 6, 2013 – Sep 10, 2013

lore
Share & tools
lore
#0 lore raw

cover meta-yocto-bsp: 3.10 updates

Richard/Saul,

Here's the last set of updates on the heels of the 3.10 stabilization.

I realize that these are later than I wanted to send them, but with other issues around 3.10, it didn't make sense to pile them on.

They are kernel version uprevs, but there are a number of ourstanding bugs on all the boards that make no sense to fix on 3.4. With this, we do take the risk of new bugs, but the newer kernel fixes a lot, and hopefully breaks very little.

Also with this, we have all reference BSPs on 3.10!

So here they are, tested locall and by the Wind River BSP team.

Cheers,

Bruce

The following changes since commit fc8a99ffc3974a5cb2b6d12a5a95d019f15c5f22:

kern-tools: support no author patches (2013-09-06 00:14:11 -0400)

are available in the git repository at:

git://git.pokylinux.org/poky-contrib zedd/kernel-yocto
http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=zedd/kernel-yocto

Bruce Ashfield (2):
meta-yocto-bsp: update h/w reference boards SRCREVs linux-yocto/3.10: update meta SRCREV for beagleboard config changes

Kevin Hao (1):
mpc8315e-rdb: update to the 3.10 kernel

Liming Wang (1):
beagleboard: upgrade the kernel to 3.10.x

 meta-yocto-bsp/conf/machine/beagleboard.conf                 |    5 +++--
 meta-yocto-bsp/conf/machine/mpc8315e-rdb.conf                |    2 +-
 .../recipes-kernel/linux/linux-yocto_3.10.bbappend           |   10 +++++-----
 meta/recipes-kernel/linux/linux-yocto-rt_3.10.bb             |    2 +-
 meta/recipes-kernel/linux/linux-yocto-tiny_3.10.bb           |    2 +-
 meta/recipes-kernel/linux/linux-yocto_3.10.bb                |    2 +-
 6 files changed, 12 insertions(+), 11 deletions(-)
Signature · 1 line
1.7.10.4
#1 lore raw

PATCH 1/4 mpc8315e-rdb: update to the 3.10 kernel

From: Kevin Hao <[email protected]>

Update the mpc8315e-rdb to the latest available yocto kernel. Build and boot test on mpc8315e-rdb board with core-image-sato.

---
 meta-yocto-bsp/conf/machine/mpc8315e-rdb.conf |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
meta-yocto-bsp/conf/machine/mpc8315e-rdb.conf +1 -1
index 3e984a7..ab1eaa9 100644
@@ -14,7 +14,7 @@ SERIAL_CONSOLE = "115200 ttyS0"
 
 MACHINE_FEATURES = "keyboard pci ext2 ext3 serial"
 
-PREFERRED_VERSION_linux-yocto ?= "3.4%"
+PREFERRED_VERSION_linux-yocto ?= "3.10%"
 PREFERRED_PROVIDER_virtual/kernel = "linux-yocto"
 
 PREFERRED_PROVIDER_virtual/xserver ?= "xserver-xorg"
Signature · 1 line
1.7.10.4
#2 lore raw

PATCH 2/4 meta-yocto-bsp: update h/w reference boards SRCREVs

In reply to Bruce Ashfield

Updating the machine SRCREVs for the hardware reference boards to the latest 3.10.10 and ssh fixes.

---
 .../recipes-kernel/linux/linux-yocto_3.10.bbappend           |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
meta-yocto-bsp/recipes-kernel/linux/linux-yocto_3.10.bbappend +5 -5
index c3968ef..4391c0f 100644
@@ -7,11 +7,11 @@ KBRANCH_beagleboard = "standard/beagleboard"
 KMACHINE_genericx86 ?= "common-pc"
 KMACHINE_genericx86-64 ?= "common-pc-64"
 
-SRCREV_machine_genericx86 ?= "6c1528b2b78d1ec7e75bb7a9880074ec35aa1aa0"
-SRCREV_machine_genericx86-64 ?= "6c1528b2b78d1ec7e75bb7a9880074ec35aa1aa0"
-SRCREV_machine_routerstationpro ?= "3991d03bd450e9363d5b6e97ede0628ba073db79"
-SRCREV_machine_mpc8315e-rdb ?= "8d8339af518104db03f9c36b82f4372569e55b0a"
-SRCREV_machine_beagleboard ?= "6c1528b2b78d1ec7e75bb7a9880074ec35aa1aa0"
+SRCREV_machine_genericx86 ?= "ebc8428fdd938cfdfcdcadd77c3308ece6a57de1"
+SRCREV_machine_genericx86-64 ?= "ebc8428fdd938cfdfcdcadd77c3308ece6a57de1"
+SRCREV_machine_routerstationpro ?= "80d9c863208fba7d8af6afe7b9167808635a56c0"
+SRCREV_machine_mpc8315e-rdb ?= "b9b4bf71249ac7a24420913aa90f7ba75578d5a5"
+SRCREV_machine_beagleboard ?= "ebc8428fdd938cfdfcdcadd77c3308ece6a57de1"
 
 COMPATIBLE_MACHINE_genericx86 = "genericx86"
 COMPATIBLE_MACHINE_genericx86-64 = "genericx86-64"
Signature · 1 line
1.7.10.4
#3 lore raw

PATCH 3/4 beagleboard: upgrade the kernel to 3.10.x

In reply to Bruce Ashfield

From: Liming Wang <[email protected]>

In 3.10.x linux kernel, uImage can't be compiled by default. But zImage has been supported by the latest u-boot, so use zImage as the default kernel image file. In u-boot command, use "bootz", instead of "bootm", to boot the kernel.

And add device tree files to support dtb in latest kernel.

---
 meta-yocto-bsp/conf/machine/beagleboard.conf |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
meta-yocto-bsp/conf/machine/beagleboard.conf +3 -2
index 5f4c55a..dd0c222 100644
@@ -29,9 +29,10 @@ EXTRA_IMAGECMD_jffs2 = "-lnp "
 SERIAL_CONSOLE = "115200 ttyO2"
 
 PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto"
-PREFERRED_VERSION_linux-yocto ?= "3.4%"
+PREFERRED_VERSION_linux-yocto ?= "3.10%"
 
-KERNEL_IMAGETYPE = "uImage"
+KERNEL_IMAGETYPE = "zImage"
+KERNEL_DEVICETREE = "${S}/arch/powerpc/boot/dts/omap3-beagle.dts ${S}/arch/powerpc/boot/dts/omap3-beagle-xm.dts"
 
 SPL_BINARY = "MLO"
 UBOOT_SUFFIX = "img"
Signature · 1 line
1.7.10.4
#4 lore raw

Re: [PATCH 3/4] beagleboard: upgrade the kernel to 3.10.x

Quoted 5 lines · Bruce Ashfield

From: Liming Wang <[email protected]>

In 3.10.x linux kernel, uImage can't be compiled by default. But zImage has been supported by the latest u-boot, so use zImage as the default kernel image file. In u-boot command, use "bootz", instead of "bootm", to boot the kernel.

NAK. (At least based on the info given above regarding the uImage to zImage transfer).

I missed this patch earlier...

What's the issue with uImage on 3.10.x?
I'm running a kernel.org 3.10.x using linux-yocto-custom just fine here (although for another board).

I suspect the issue (that I guess Liming had), is due to the powerpc being mixed into his build. (Bruce replied on the oe-core list to a path which corrected the path to the DTS).

Cheers,
Anders

Quoted 25 lines

And add device tree files to support dtb in latest kernel.

---
 meta-yocto-bsp/conf/machine/beagleboard.conf |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
meta-yocto-bsp/conf/machine/beagleboard.conf +3 -2
index 5f4c55a..dd0c222 100644
@@ -29,9 +29,10 @@ EXTRA_IMAGECMD_jffs2 = "-lnp "
 SERIAL_CONSOLE = "115200 ttyO2"
 
 PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto"
-PREFERRED_VERSION_linux-yocto ?= "3.4%"
+PREFERRED_VERSION_linux-yocto ?= "3.10%"
 
-KERNEL_IMAGETYPE = "uImage"
+KERNEL_IMAGETYPE = "zImage"
+KERNEL_DEVICETREE = "${S}/arch/powerpc/boot/dts/omap3-beagle.dts ${S}/arch/powerpc/boot/dts/omap3-beagle-xm.dts"
 
 SPL_BINARY = "MLO"
 UBOOT_SUFFIX = "img"
Signature · 2 lines
Anders Darander
ChargeStorm AB / eStorm AB
#5 lore raw

Re: [PATCH 3/4] beagleboard: upgrade the kernel to 3.10.x

Quoted 12 lines · Anders Darander
Quoted 5 lines · Bruce Ashfield

From: Liming Wang <[email protected]>

In 3.10.x linux kernel, uImage can't be compiled by default. But zImage has been supported by the latest u-boot, so use zImage as the default kernel image file. In u-boot command, use "bootz", instead of "bootm", to boot the kernel.

NAK. (At least based on the info given above regarding the uImage to zImage transfer).

I missed this patch earlier...

Quoted 7 lines

What's the issue with uImage on 3.10.x?
I'm running a kernel.org 3.10.x using linux-yocto-custom just fine here (although for another board).

I suspect the issue (that I guess Liming had), is due to the powerpc being mixed into his build. (Bruce replied on the oe-core list to a path which corrected the path to the DTS).

No, that wasn't the issue. uImage requires a LOADADDR in many cases and that isn't currently encoded in the machine configs.

zImage works fine, want to expand our coverage with the reference boards, so no, there's no NAK of this. It's fine as is.

Other layers and BSPs are free to use uImage, just as this reference is free to use the zImage.

Bruce

Quoted 29 lines

Cheers,
Anders

Quoted 25 lines

And add device tree files to support dtb in latest kernel.

---
  meta-yocto-bsp/conf/machine/beagleboard.conf |    5 +++--
  1 file changed, 3 insertions(+), 2 deletions(-)
meta-yocto-bsp/conf/machine/beagleboard.conf +3 -2
index 5f4c55a..dd0c222 100644
@@ -29,9 +29,10 @@ EXTRA_IMAGECMD_jffs2 = "-lnp "
  SERIAL_CONSOLE = "115200 ttyO2"
 
  PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto"
-PREFERRED_VERSION_linux-yocto ?= "3.4%"
+PREFERRED_VERSION_linux-yocto ?= "3.10%"
 
-KERNEL_IMAGETYPE = "uImage"
+KERNEL_IMAGETYPE = "zImage"
+KERNEL_DEVICETREE = "${S}/arch/powerpc/boot/dts/omap3-beagle.dts ${S}/arch/powerpc/boot/dts/omap3-beagle-xm.dts"
 
  SPL_BINARY = "MLO"
  UBOOT_SUFFIX = "img"
#6 lore raw

Re: [PATCH 3/4] beagleboard: upgrade the kernel to 3.10.x

Quoted 19 lines · Bruce Ashfield
Quoted 18 lines · Anders Darander
Quoted 7 lines · Bruce Ashfield

From: Liming Wang <[email protected]>

In 3.10.x linux kernel, uImage can't be compiled by default. But zImage has been supported by the latest u-boot, so use zImage as the default kernel
image file. In u-boot command, use "bootz", instead of "bootm", to boot the kernel.

NAK. (At least based on the info given above regarding the uImage to zImage transfer).

I missed this patch earlier...

What's the issue with uImage on 3.10.x?
I'm running a kernel.org 3.10.x using linux-yocto-custom just fine here (although for another board).

Quoted 6 lines
Quoted 3 lines

I suspect the issue (that I guess Liming had), is due to the powerpc being mixed into his build. (Bruce replied on the oe-core list to a path which corrected the path to the DTS).

No, that wasn't the issue. uImage requires a LOADADDR in many cases and that isn't currently encoded in the machine configs.

I forgot to add that if QA shows issues with this change, then obviously, I'll revisit the image format default.

Bruce

Quoted 41 lines

zImage works fine, want to expand our coverage with the reference boards, so no, there's no NAK of this. It's fine as is.

Other layers and BSPs are free to use uImage, just as this reference is free to use the zImage.

Bruce

Quoted 31 lines

Cheers,
Anders

Quoted 27 lines

And add device tree files to support dtb in latest kernel.

---
  meta-yocto-bsp/conf/machine/beagleboard.conf |    5 +++--
  1 file changed, 3 insertions(+), 2 deletions(-)
meta-yocto-bsp/conf/machine/beagleboard.conf +3 -2
index 5f4c55a..dd0c222 100644
@@ -29,9 +29,10 @@ EXTRA_IMAGECMD_jffs2 = "-lnp "
  SERIAL_CONSOLE = "115200 ttyO2"
 
  PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto"
-PREFERRED_VERSION_linux-yocto ?= "3.4%"
+PREFERRED_VERSION_linux-yocto ?= "3.10%"
 
-KERNEL_IMAGETYPE = "uImage"
+KERNEL_IMAGETYPE = "zImage"
+KERNEL_DEVICETREE = "${S}/arch/powerpc/boot/dts/omap3-beagle.dts

${S}/arch/powerpc/boot/dts/omap3-beagle-xm.dts"

SPL_BINARY = "MLO"
UBOOT_SUFFIX = "img"

#7 lore raw

Re: [PATCH 3/4] beagleboard: upgrade the kernel to 3.10.x

In reply to Bruce Ashfield
Quoted 17 lines · Bruce Ashfield
Quoted 15 lines · Anders Darander
Quoted 5 lines · Bruce Ashfield

From: Liming Wang <[email protected]>

In 3.10.x linux kernel, uImage can't be compiled by default. But zImage has been supported by the latest u-boot, so use zImage as the default kernel image file. In u-boot command, use "bootz", instead of "bootm", to boot the kernel.

NAK. (At least based on the info given above regarding the uImage to zImage transfer).

I missed this patch earlier...

What's the issue with uImage on 3.10.x?
I'm running a kernel.org 3.10.x using linux-yocto-custom just fine here (although for another board).

Quoted 6 lines
Quoted 3 lines

I suspect the issue (that I guess Liming had), is due to the powerpc being mixed into his build. (Bruce replied on the oe-core list to a path which corrected the path to the DTS).

No, that wasn't the issue. uImage requires a LOADADDR in many cases and that isn't currently encoded in the machine configs.

Ah, ok. Then I'll obviously redraw my NAK-wishes for this patch.

I think the reason that uImage can't be compiled should have been stated in the commit log, though. If for nothing else, just to make it clear to everyone that there's no general uImage issue; rather an issue with the specific board setup.

Cheers,
Anders

Quoted 5 lines

zImage works fine, want to expand our coverage with the reference boards, so no, there's no NAK of this. It's fine as is.

Other layers and BSPs are free to use uImage, just as this reference is free to use the zImage.

Signature · 2 lines
Anders Darander
ChargeStorm AB / eStorm AB
#8 lore raw

Re: [PATCH 3/4] beagleboard: upgrade the kernel to 3.10.x

Quoted 26 lines · Anders Darander
Quoted 17 lines · Bruce Ashfield
Quoted 15 lines · Anders Darander
Quoted 5 lines · Bruce Ashfield

From: Liming Wang <[email protected]>

In 3.10.x linux kernel, uImage can't be compiled by default. But zImage has been supported by the latest u-boot, so use zImage as the default kernel image file. In u-boot command, use "bootz", instead of "bootm", to boot the kernel.

NAK. (At least based on the info given above regarding the uImage to zImage transfer).

I missed this patch earlier...

What's the issue with uImage on 3.10.x?
I'm running a kernel.org 3.10.x using linux-yocto-custom just fine here (although for another board).

Quoted 6 lines
Quoted 3 lines

I suspect the issue (that I guess Liming had), is due to the powerpc being mixed into his build. (Bruce replied on the oe-core list to a path which corrected the path to the DTS).

No, that wasn't the issue. uImage requires a LOADADDR in many cases and that isn't currently encoded in the machine configs.

Quoted 6 lines

Ah, ok. Then I'll obviously redraw my NAK-wishes for this patch.

I think the reason that uImage can't be compiled should have been stated in the commit log, though. If for nothing else, just to make it clear to everyone that there's no general uImage issue; rather an issue with the specific board setup.

We can do that. I also re-opened the bugzilla so it can be used for making sure this is clear.

Bruce

Quoted 11 lines

Cheers,
Anders

Quoted 5 lines

zImage works fine, want to expand our coverage with the reference boards, so no, there's no NAK of this. It's fine as is.

Other layers and BSPs are free to use uImage, just as this reference is free to use the zImage.

#9 lore raw

PATCH 4/4 linux-yocto/3.10: update meta SRCREV for beagleboard config changes

In reply to Bruce Ashfield

Updating the beagleboard configuration to match the 3.10 kernel changes. With this, the beagle* boards boot out of the box, with no additional changes required.

Simarpreet Singh <[email protected]>

---
 meta/recipes-kernel/linux/linux-yocto-rt_3.10.bb   |    2 +-
 meta/recipes-kernel/linux/linux-yocto-tiny_3.10.bb |    2 +-
 meta/recipes-kernel/linux/linux-yocto_3.10.bb      |    2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)
meta/recipes-kernel/linux/linux-yocto-rt_3.10.bb +1 -1
index a2e0310..a4366d0 100644
@@ -5,7 +5,7 @@ KBRANCH_qemuppc = "standard/preempt-rt/qemuppc"
 
 SRCREV_machine ?= "38793e629654f6b3e3f371a6b1f1745df26450f4"
 SRCREV_machine_qemuppc ?= "d4c836c55fce6f1a7f299bba2104f457b201c63d"
-SRCREV_meta ?= "cd502a88148ab214b54860f97a96f41858fd6446"
+SRCREV_meta ?= "ea900d1db60ba48962227f0976ac55f9e25bfa24"
 
 SRC_URI = "git://git.yoctoproject.org/linux-yocto-3.10.git;bareclone=1;branch=${KBRANCH},meta;name=machine,meta"
 
meta/recipes-kernel/linux/linux-yocto-tiny_3.10.bb +1 -1
index 8b3dbe0..b3457b3 100644
@@ -10,7 +10,7 @@ LINUX_VERSION ?= "3.10.10"
 KMETA = "meta"
 
 SRCREV_machine ?= "ebc8428fdd938cfdfcdcadd77c3308ece6a57de1"
-SRCREV_meta ?= "cd502a88148ab214b54860f97a96f41858fd6446"
+SRCREV_meta ?= "ea900d1db60ba48962227f0976ac55f9e25bfa24"
 
 PV = "${LINUX_VERSION}+git${SRCPV}"
 
meta/recipes-kernel/linux/linux-yocto_3.10.bb +1 -1
index 2de1798..e570cd6 100644
@@ -10,7 +10,7 @@ SRCREV_machine_qemux86 ?= "ebc8428fdd938cfdfcdcadd77c3308ece6a57de1"
 SRCREV_machine_qemux86-64 ?= "ebc8428fdd938cfdfcdcadd77c3308ece6a57de1"
 SRCREV_machine_qemumips64 ?= "ebc55bed9558a0e2f390e9cef03161b299138326"
 SRCREV_machine ?= "ebc8428fdd938cfdfcdcadd77c3308ece6a57de1"
-SRCREV_meta ?= "cd502a88148ab214b54860f97a96f41858fd6446"
+SRCREV_meta ?= "ea900d1db60ba48962227f0976ac55f9e25bfa24"
 
 SRC_URI = "git://git.yoctoproject.org/linux-yocto-3.10.git;bareclone=1;branch=${KBRANCH},${KMETA};name=machine,meta"
 
Signature · 1 line
1.7.10.4