Introduce default adapter property
cover Introduce default adapter property
From: Timo Mueller <[email protected]>
Hi,
the information about the default adapter is currently not available through the D-Bus API of BlueZ. But as plugins can use this information to choose the adapter they act upon it would be helpful for users to be able to retrieve this information as well.
For example the neard plugin uses this information to decide for which adapter oob data is generated. Users could use the same information to power the adapter before actually sending the oob data.
Best regards,
Timo
Timo Mueller (2):
doc: Introduce default adapter property
adapter: Introduce default adapter property
doc/adapter-api.txt | 9 +++++++++ src/adapter.c | 15 +++++++++++++++ 2 files changed, 24 insertions(+)
Signature · 1 line
1.8.3.1
PATCH 1/2 doc: Introduce default adapter property
From: Timo Mueller <[email protected]>
Some plugins choose a default adapter when no specific adapter has been selected. This information was not exposed in the adapters D-Bus properties.
With the new property users can find out which adapter is used if no adapter has been specified. This allows them to change the properties of the adapter beforehand, e.g. powering the adapter before oob data is sent.
--- doc/adapter-api.txt | 9 +++++++++ 1 file changed, 9 insertions(+)
doc/adapter-api.txt +9 -0
@@ -153,3 +153,12 @@ Properties string Address [readonly] Local Device ID information in modalias format used by the kernel and udev. + + boolean Default [readonly] + + Indicates that the adapter is the default adapter. The + default adapter is used when multiple adapters exist and + no specific adapter has been selected. + + In case the default adapter is removed, one of the + remaining adapters will become the new default adapter.
Signature · 1 line
1.8.3.1
PATCH 2/2 adapter: Introduce default adapter property
From: Timo Mueller <[email protected]>
Some plugins choose a default adapter when no specific adapter has been selected. This information was not exposed in the adapters D-Bus properties.
With the new property users can find out which adapter is used if no adapter has been specified. This allows them to change the properties of the adapter beforehand, e.g. powering the adapter before oob data is sent.
--- src/adapter.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+)
src/adapter.c +15 -0
@@ -2126,6 +2126,17 @@ static gboolean property_get_modalias(const GDBusPropertyTable *property,return TRUE; } +static gboolean property_get_default (const GDBusPropertyTable *property, +DBusMessageIter *iter,void *user_data) +{ +struct btd_adapter *adapter = user_data; +dbus_bool_t is_default =btd_adapter_is_default (adapter); + +dbus_message_iter_append_basic (iter,DBUS_TYPE_BOOLEAN , &is_default); + +return TRUE; +} +static int device_path_cmp (gconstpointer a,gconstpointer b) {const struct btd_device *device = a;
@@ -2193,6 +2204,7 @@ static const GDBusPropertyTable adapter_properties[] = { { "UUIDs", "as", property_get_uuids }, { "Modalias", "s", property_get_modalias, NULL, property_exists_modalias }, + { "Default", "b", property_get_default }, { } };
@@ -5673,6 +5685,9 @@ static int adapter_unregister(struct btd_adapter *adapter) new_default = adapters->data; new_default->is_default = true; + +g_dbus_emit_property_changed (dbus_conn, new_default->path, +ADAPTER_INTERFACE ,"Default" ); } adapter_list =g_list_remove (adapter_list, adapter);
Signature · 1 line
1.8.3.1
Hi Timo,
Quoted 4 lines
From: Timo Mueller <[email protected]>
Hi,
Quoted 8 lines
the information about the default adapter is currently not available through the D-Bus API of BlueZ. But as plugins can use this information to choose the adapter they act upon it would be helpful for users to be able to retrieve this information as well.
For example the neard plugin uses this information to decide for which adapter oob data is generated. Users could use the same information to power the adapter before actually sending the oob data.
I think this property is bluetoothd internal detail and should not be needed to be exported to user. If reason for this is scenario where multiple BT and NFC adapters are present and you need to match them in pairs, then proper solution would probably require extending neard agent interface. Neard plugin could be also made 'smarter' about multiple adapters eg. try to choose other controller if default one is not powered etc. Regarding changing power state of bt controller, I think this could be done by neard plugin itself (possible based on some static configuration or even runtime dbus setting...). It is on my 'TODO when have some spare time' list :)
It would be good if you could outline usecases you are trying to address with this change.
Signature · 2 lines
BR Szymon Janc
Hi Szymon,
Szymon Janc wrote, On 04.12.2013 09:32:
Quoted 11 lines
Hi Timo,
Quoted 9 lines
From: Timo Mueller <[email protected]>
Hi,
the information about the default adapter is currently not available through the D-Bus API of BlueZ. But as plugins can use this information to choose the adapter they act upon it would be helpful for users to be able to retrieve this information as well.
Quoted 6 lines
Quoted 3 lines
For example the neard plugin uses this information to decide for which adapter oob data is generated. Users could use the same information to power the adapter before actually sending the oob data.
I think this property is bluetoothd internal detail and should not be needed to be exported to user.
Alright. Is the default information needed at all? I might be missing something but the default information seems to only be used by the hostname, sixaxis and neard plugins. I don't know about sixaxis, but the hostname plugin could also do without this information. If the neard plugin would handle multiple adapters, then the default adapter property could be dropped completely.
Quoted 8 lines
If reason for this is scenario where multiple BT and
NFC adapters are present and you need to match them in pairs, then proper solution would probably require extending neard agent interface. Neard plugin could be also made 'smarter' about multiple adapters eg. try to choose other controller if default one is not powered etc. Regarding changing power state of bt controller, I think this could be done by neard plugin itself (possible based on some static configuration or even runtime dbus setting...). It is on my 'TODO when have some spare time' list :)
Automatic powering, if enabled by 'configuration', sounds good to me. Regarding the adapter selection, how about a runtime dbus setting to set the adapter that the neard plugin is using? It could then behave as bluetoothctl does right now. Choosing the first adapter on start and use the selected adapter afterwards.
Quoted 3 lines
It would be good if you could outline usecases you are trying to address with this change.
The use case was to only send the oob data when the device has not yet been paired with the adapter that is used. On Android this wouldn't interrupt the regular Android Beam behaviour (when sending an URL from the browser for example). Of course this requires a unique ID that could be requested via NFC and mapped to a BD_ADDR. Unfortunately this ID, as just discussed in IRC, does not exist. So, admittedly this use case is broken.
Best regards,
Timo