Skip to contentSkip to conversation

Rootfs/image generation refactoring (cover letter only)

PATCH Superseded Laurentiu Palcu 3 participants 22 messages Feb 3, 2014 – Feb 11, 2014

lore
Share & tools
lore
#0 lore raw

cover Rootfs/image generation refactoring (cover letter only)

Hi all,

First off: this large patchset adds no change in the rootfs/image creation functionality. The main logic is supposed to be the same as before. Also, I decided not to spam the list with this large patchset (49 patches) and I sent only the cover-letter. Those who want to take a peak at the code, can have a look by clicking the link below.

If people would like the patches sent to the list too, just say so.

Ok, what's it all about then? Here are the main changes:
* all the old bash shell code (more then 90% of it anyway) has been ported to Python. This would, hopefully, make the code more readable and allows us to use some of the Python powerful features. The following new files were born, together with a fair amount of changes in some bbclass'es:

Quoted 1 line

meta/lib/oe/manifest.py - implements the initial manifest creation (for now).

This is a file containing the list of packages going into the final image. In theory, we should be able to use this file later to re-generate the rootfs from a package feed, outside bitbake environment;

> meta/lib/oe/package_manager.py - implements the basic package management
API: install/remove packages, update index DB/index file creation. This is mainly used by Rootfs/Sdk classes in order to generate the rootfs;

> meta/lib/oe/rootfs.py - contains code for rootfs generation;

> meta/lib/oe/image.py - the image creation part;

> meta/lib/oe/sdk.py - populate the SDK target/host rootfs.

With the new code, the entire do_rootfs routine in image.bbclass has now just 3 function calls: create_manifest(), create_rootfs(), create_image(). In this order. Easier to debug just a certain part of the rootfs/image creation process.

* Some performance improvement has been obtained in 2 areas: index file creation and image generation. These operations were serial in the old code. Now, they're done in parallel.

* People complained about intercept scripts being hard to debug. That was because the old code used a log checking routine that scanned the logs for some standart error strings which were not necessarily errors. Hence, the intercepts had their stderr redirected to /dev/null. This was now removed since we can easily handle intercepts errors in python. So, errors will go to the log file.

That's about it. There is room for even further improvement, in the index creation part. I had some code in place for that but I had to remove it, temporarily, due to some synchronization issues. Hopefully, I'll find the issue and include that piece back.

The code was tested on my machine and on a local AB for x86, x86-64, arm, ppc, mips and build appliance. The builds and sanity tests finished successfully.

laurentiu

The following changes since commit b37dd451a52622d5b570183a81583cc34c2ff555:

rootfs_ipk: Ensure that BAD_RECOMMENDATIONS are honoured for all architectures (2014-02-02 22:37:42 +0000)

are available in the git repository at:

git://git.yoctoproject.org/poky-contrib lpalcu/rootfs_refactoring_ship_oecore
http://git.yoctoproject.org/cgit.cgi/poky-contrib/log/?h=lpalcu/rootfs_refactoring_ship_oecore

Hongxu Jia (18):
lib/oe/manifest.py: add rpm image manifest creation lib/oe/package_manager.py: support RpmPM lib/oe/rootfs.py: support RpmRootfs
lib/oe/rootfs.py: Tweak the rootfs removing operation rootfs.py: fix uninstall uneeded pkgs failed
rootfs.py: strip kernel-abiversion useless readline lib/oe/image.py: fix get rootfs_extra_space failed image.bbclass/license.bbclass: ajustment list_installed_packages
invoking
license.bbclass: fix license_create_manifest failed lib/oe/sdk.py: support RpmRootfs image.bbclass/populate_sdk_base.bbclass: shift position of sdk
complementary install definition
Cleanup rootfs_rpm,package_rpm bbclass files lib/oe/rootfs.py: fix invoking rpm _handle_intercept_failure failed lib/oe/package_manager.py: fix invoking rpm save_rpmpostinist failed lib/oe/rootfs.py: fix invoking _run_intercepts failed populate_sdk_rpm.bbclass: remove old shell code package_manger.py/rootfs.py: rename save_rpmpostinist with
save_rpmpostinst
lib/oe/package_manager.py: moving global SCRIPTLET_FORMAT and
DB_CONFIG_CONTENT to RpmPM

Laurentiu Palcu (31):
lib/oe/utils.py: add pre/post process helper function lib/oe/image.py: add new image creation library lib/oe/manifest.py: add library for image manifest creation lib/oe/package_manager.py: add new package management library lib/oe/rootfs.py: add new library for rootfs creation Activate the new python rootfs/image creation routines oe/manifest.py: Add manifest creation for opkg package_(deb|ipk).bbclass: remove the stamp when creating package
from cache
lib/oe/manifest.py: create global variables for package types lib/oe/package_manager.py: add deploy dir locking mechanism lib/oe/package_manager.py: use the bitbake APT_ARGS variable lib/oe/package_manager.py: add support for opkg backend lib/oe/rootfs.py: add support for opkg backend
Cleanup image,rootfs_ipk,package_ipk bbclass files image.bbclass, lib/oe/rootfs.py: remove intercept_scripts directory lib/oe/manifest.py: create manifests for SDK too lib/oe/rootfs.py: use Manifest.INSTALL_ORDER lib/oe/package_manager.py: fixes for dpkg backend lib/oe/sdk.py: add SDK class
populate_sdk_base.bbclass: activate the new python routines image.bbclass: change POPULATE_SDK_POST_TARGET_COMMAND populate_sdk_(deb|ipk).bbclass: remove old shell code lib/oe/package_manager.py: RpmPM fixes
lib/oe/rootfs.py: warn the user if intercept hooks fail scripts/postinst-intercepts: do not redirect errors to /dev/null lib/oe/package_manager.py: DpkgPM, use lock on deploy dir lib/oe/image.py: fix image size calculation routine lib/oe/package_manager.py: OpkgPM/DpkgPM fixes lib/oe/rootfs.py: OpkgRootfs, fix issue in _get_delayed_postinsts() lib/oe/package_manager.py: do not use stamps lib/oe/package_manager.py: OpkgPM, bad recommendation handling change

 meta/classes/image.bbclass                      |  329 +-----
 meta/classes/image_types.bbclass                |  113 --
 meta/classes/license.bbclass                    |   16 +-
 meta/classes/package_deb.bbclass                |  151 +--
 meta/classes/package_ipk.bbclass                |  202 +---
 meta/classes/package_rpm.bbclass                |  472 --------
 meta/classes/populate_sdk_base.bbclass          |   63 +-
 meta/classes/populate_sdk_deb.bbclass           |   59 -
 meta/classes/populate_sdk_ipk.bbclass           |   54 -
 meta/classes/populate_sdk_rpm.bbclass           |  152 ---
 meta/classes/rootfs_deb.bbclass                 |  115 --
 meta/classes/rootfs_ipk.bbclass                 |  109 +-
 meta/classes/rootfs_rpm.bbclass                 |  184 ----
 meta/lib/oe/image.py                            |  239 ++++
 meta/lib/oe/manifest.py                         |  291 +++++
 meta/lib/oe/package_manager.py                  | 1326 +++++++++++++++++++++++
 meta/lib/oe/rootfs.py                           |  680 ++++++++++++
 meta/lib/oe/sdk.py                              |  343 ++++++
 meta/lib/oe/utils.py                            |   12 +-
 scripts/postinst-intercepts/update_font_cache   |    2 +-
 scripts/postinst-intercepts/update_pixbuf_cache |    2 +-
 21 files changed, 2965 insertions(+), 1949 deletions(-)
 create mode 100644 meta/lib/oe/image.py
 create mode 100644 meta/lib/oe/manifest.py
 create mode 100644 meta/lib/oe/package_manager.py
 create mode 100644 meta/lib/oe/rootfs.py
 create mode 100644 meta/lib/oe/sdk.py
Signature · 1 line
1.7.9.5
#1 lore raw

In my ignorance, I forgot to thank Hongxu, from WindRiver, for his help on implementing the rpm related part.

Thanks Hongxu,
laurentiu

Quoted 157 lines · Laurentiu Palcu

Hi all,

First off: this large patchset adds no change in the rootfs/image creation functionality. The main logic is supposed to be the same as before. Also, I decided not to spam the list with this large patchset (49 patches) and I sent only the cover-letter. Those who want to take a peak at the code, can have a look by clicking the link below.

If people would like the patches sent to the list too, just say so.

Ok, what's it all about then? Here are the main changes:
* all the old bash shell code (more then 90% of it anyway) has been ported to Python. This would, hopefully, make the code more readable and allows us to use some of the Python powerful features. The following new files were born, together with a fair amount of changes in some bbclass'es:

Quoted 1 line

meta/lib/oe/manifest.py - implements the initial manifest creation (for now).

This is a file containing the list of packages going into the final image. In theory, we should be able to use this file later to re-generate the rootfs from a package feed, outside bitbake environment;

> meta/lib/oe/package_manager.py - implements the basic package management
API: install/remove packages, update index DB/index file creation. This is mainly used by Rootfs/Sdk classes in order to generate the rootfs;

> meta/lib/oe/rootfs.py - contains code for rootfs generation;

> meta/lib/oe/image.py - the image creation part;

> meta/lib/oe/sdk.py - populate the SDK target/host rootfs.

With the new code, the entire do_rootfs routine in image.bbclass has now just 3 function calls: create_manifest(), create_rootfs(), create_image(). In this order. Easier to debug just a certain part of the rootfs/image creation process.

* Some performance improvement has been obtained in 2 areas: index file creation and image generation. These operations were serial in the old code. Now, they're done in parallel.

* People complained about intercept scripts being hard to debug. That was because the old code used a log checking routine that scanned the logs for some standart error strings which were not necessarily errors. Hence, the intercepts had their stderr redirected to /dev/null. This was now removed since we can easily handle intercepts errors in python. So, errors will go to the log file.

That's about it. There is room for even further improvement, in the index creation part. I had some code in place for that but I had to remove it, temporarily, due to some synchronization issues. Hopefully, I'll find the issue and include that piece back.

The code was tested on my machine and on a local AB for x86, x86-64, arm, ppc, mips and build appliance. The builds and sanity tests finished successfully.

laurentiu

The following changes since commit b37dd451a52622d5b570183a81583cc34c2ff555:

rootfs_ipk: Ensure that BAD_RECOMMENDATIONS are honoured for all architectures (2014-02-02 22:37:42 +0000)

are available in the git repository at:

git://git.yoctoproject.org/poky-contrib lpalcu/rootfs_refactoring_ship_oecore
http://git.yoctoproject.org/cgit.cgi/poky-contrib/log/?h=lpalcu/rootfs_refactoring_ship_oecore

Hongxu Jia (18):
lib/oe/manifest.py: add rpm image manifest creation lib/oe/package_manager.py: support RpmPM lib/oe/rootfs.py: support RpmRootfs
lib/oe/rootfs.py: Tweak the rootfs removing operation rootfs.py: fix uninstall uneeded pkgs failed
rootfs.py: strip kernel-abiversion useless readline lib/oe/image.py: fix get rootfs_extra_space failed image.bbclass/license.bbclass: ajustment list_installed_packages
invoking
license.bbclass: fix license_create_manifest failed lib/oe/sdk.py: support RpmRootfs image.bbclass/populate_sdk_base.bbclass: shift position of sdk
complementary install definition
Cleanup rootfs_rpm,package_rpm bbclass files lib/oe/rootfs.py: fix invoking rpm _handle_intercept_failure failed lib/oe/package_manager.py: fix invoking rpm save_rpmpostinist failed lib/oe/rootfs.py: fix invoking _run_intercepts failed populate_sdk_rpm.bbclass: remove old shell code package_manger.py/rootfs.py: rename save_rpmpostinist with
save_rpmpostinst
lib/oe/package_manager.py: moving global SCRIPTLET_FORMAT and
DB_CONFIG_CONTENT to RpmPM

Laurentiu Palcu (31):
lib/oe/utils.py: add pre/post process helper function lib/oe/image.py: add new image creation library lib/oe/manifest.py: add library for image manifest creation lib/oe/package_manager.py: add new package management library lib/oe/rootfs.py: add new library for rootfs creation Activate the new python rootfs/image creation routines oe/manifest.py: Add manifest creation for opkg package_(deb|ipk).bbclass: remove the stamp when creating package
from cache
lib/oe/manifest.py: create global variables for package types lib/oe/package_manager.py: add deploy dir locking mechanism lib/oe/package_manager.py: use the bitbake APT_ARGS variable lib/oe/package_manager.py: add support for opkg backend lib/oe/rootfs.py: add support for opkg backend
Cleanup image,rootfs_ipk,package_ipk bbclass files image.bbclass, lib/oe/rootfs.py: remove intercept_scripts directory lib/oe/manifest.py: create manifests for SDK too lib/oe/rootfs.py: use Manifest.INSTALL_ORDER lib/oe/package_manager.py: fixes for dpkg backend lib/oe/sdk.py: add SDK class
populate_sdk_base.bbclass: activate the new python routines image.bbclass: change POPULATE_SDK_POST_TARGET_COMMAND populate_sdk_(deb|ipk).bbclass: remove old shell code lib/oe/package_manager.py: RpmPM fixes
lib/oe/rootfs.py: warn the user if intercept hooks fail scripts/postinst-intercepts: do not redirect errors to /dev/null lib/oe/package_manager.py: DpkgPM, use lock on deploy dir lib/oe/image.py: fix image size calculation routine lib/oe/package_manager.py: OpkgPM/DpkgPM fixes lib/oe/rootfs.py: OpkgRootfs, fix issue in _get_delayed_postinsts() lib/oe/package_manager.py: do not use stamps lib/oe/package_manager.py: OpkgPM, bad recommendation handling change

 meta/classes/image.bbclass                      |  329 +-----
 meta/classes/image_types.bbclass                |  113 --
 meta/classes/license.bbclass                    |   16 +-
 meta/classes/package_deb.bbclass                |  151 +--
 meta/classes/package_ipk.bbclass                |  202 +---
 meta/classes/package_rpm.bbclass                |  472 --------
 meta/classes/populate_sdk_base.bbclass          |   63 +-
 meta/classes/populate_sdk_deb.bbclass           |   59 -
 meta/classes/populate_sdk_ipk.bbclass           |   54 -
 meta/classes/populate_sdk_rpm.bbclass           |  152 ---
 meta/classes/rootfs_deb.bbclass                 |  115 --
 meta/classes/rootfs_ipk.bbclass                 |  109 +-
 meta/classes/rootfs_rpm.bbclass                 |  184 ----
 meta/lib/oe/image.py                            |  239 ++++
 meta/lib/oe/manifest.py                         |  291 +++++
 meta/lib/oe/package_manager.py                  | 1326 +++++++++++++++++++++++
 meta/lib/oe/rootfs.py                           |  680 ++++++++++++
 meta/lib/oe/sdk.py                              |  343 ++++++
 meta/lib/oe/utils.py                            |   12 +-
 scripts/postinst-intercepts/update_font_cache   |    2 +-
 scripts/postinst-intercepts/update_pixbuf_cache |    2 +-
 21 files changed, 2965 insertions(+), 1949 deletions(-)
 create mode 100644 meta/lib/oe/image.py
 create mode 100644 meta/lib/oe/manifest.py
 create mode 100644 meta/lib/oe/package_manager.py
 create mode 100644 meta/lib/oe/rootfs.py
 create mode 100644 meta/lib/oe/sdk.py
Signature · 6 lines
1.7.9.5

_______________________________________________
Openembedded-core mailing list
[email protected]
http://lists.openembedded.org/mailman/listinfo/openembedded-core
#3 lore raw
Quoted 6 lines · David Nyström
Quoted 2 lines · Laurentiu Palcu

Hi all,

Have you tested that BUILD_IMAGES_FROM_FEEDS functionality is not broken by these commits ?

No, I did not test this. I tried to test it on master though and it doesn't seem to work... Anyway, if you have a working environment, can you give it a test? Technically, the feeds are added to the main opkg.conf file in OPKG_PREPROCESS_CMD. And this functionality is supposed to work.

laurentiu

Quoted 4 lines

Br,
David

#4 lore raw
Quoted 9 lines · Laurentiu Palcu
Quoted 6 lines · David Nyström
Quoted 2 lines · Laurentiu Palcu

Hi all,

Have you tested that BUILD_IMAGES_FROM_FEEDS functionality is not broken by these commits ?

No, I did not test this. I tried to test it on master though and it doesn't seem to work...

Whats in master worked for me not too long ago with IPK at least.

Quoted 6 lines

Anyway, if you have a working environment, can
you give it a test? Technically, the feeds are added to the main opkg.conf file in OPKG_PREPROCESS_CMD. And this functionality is supposed to work.

laurentiu

$ grep -r FEED conf/local.conf
BUILD_IMAGES_FROM_FEEDS="1"
IPK_FEED_URI="file:///media/sdb5/repo/build/tmp/deploy/"
$ bitbake -c rootfs core-image-minimal

DEBUG: Executing python function rootfs_process_ignore
DEBUG: Python function rootfs_process_ignore finished
DEBUG: Executing python function rootfs_runtime_mapping
DEBUG: Python function rootfs_runtime_mapping finished
DEBUG: Executing python function do_rootfs
NOTE: ###### Generate rootfs #######
ERROR: There are no packages in /media/sdb5/bld/tmp/deploy/ipk!
DEBUG: Python function do_rootfs finished
ERROR: Function failed: do_rootfs /media/sdb5/bld/tmp/work/qemux86-poky-linux/core-image-minimal/1.0-r0/temp/log.do_rootfs.25006 (END)

$ grep -r "There are no packages in" ../poky-contrib/*
Binary file ../poky-contrib/meta/lib/oe/package_manager.pyc matches
../poky-contrib/meta/lib/oe/package_manager.py: bb.fatal("There are no packages in %s" % self.deploy_dir)
../poky-contrib/meta/lib/oe/package_manager.py: bb.fatal("There are no packages in %s!" % self.deploy_dir)
../poky-contrib/meta/lib/oe/package_manager.py: bb.fatal("There are no packages in %s" % self.deploy_dir)
d

Br,
David

Quoted 10 lines
Quoted 5 lines

Br,
David

_______________________________________________
Openembedded-core mailing list
[email protected]
http://lists.openembedded.org/mailman/listinfo/openembedded-core

#5 lore raw
Quoted 48 lines · David Nyström
Quoted 9 lines · Laurentiu Palcu
Quoted 6 lines · David Nyström
Quoted 2 lines · Laurentiu Palcu

Hi all,

Have you tested that BUILD_IMAGES_FROM_FEEDS functionality is not broken by these commits ?

No, I did not test this. I tried to test it on master though and it doesn't seem to work...

Whats in master worked for me not too long ago with IPK at least.

Quoted 6 lines

Anyway, if you have a working environment, can
you give it a test? Technically, the feeds are added to the main opkg.conf file in OPKG_PREPROCESS_CMD. And this functionality is supposed to work.

laurentiu

$ grep -r FEED conf/local.conf
BUILD_IMAGES_FROM_FEEDS="1"
IPK_FEED_URI="file:///media/sdb5/repo/build/tmp/deploy/"
$ bitbake -c rootfs core-image-minimal

DEBUG: Executing python function rootfs_process_ignore
DEBUG: Python function rootfs_process_ignore finished
DEBUG: Executing python function rootfs_runtime_mapping
DEBUG: Python function rootfs_runtime_mapping finished
DEBUG: Executing python function do_rootfs
NOTE: ###### Generate rootfs #######
ERROR: There are no packages in /media/sdb5/bld/tmp/deploy/ipk!
DEBUG: Python function do_rootfs finished
ERROR: Function failed: do_rootfs /media/sdb5/bld/tmp/work/qemux86-poky-linux/core-image-minimal/1.0-r0/temp/log.do_rootfs.25006 (END)

$ grep -r "There are no packages in" ../poky-contrib/*
Binary file ../poky-contrib/meta/lib/oe/package_manager.pyc matches
../poky-contrib/meta/lib/oe/package_manager.py: bb.fatal("There are no
packages in %s" % self.deploy_dir)
../poky-contrib/meta/lib/oe/package_manager.py: bb.fatal("There are no
packages in %s!" % self.deploy_dir)
../poky-contrib/meta/lib/oe/package_manager.py: bb.fatal("There are no
packages in %s" % self.deploy_dir)
d
Quoted 3 lines

Br,
David

Oops, bug on my behalf in above example, but it still fails the same way when using a correct IPK_FEED_URI.

IPK_FEED_URIS += " \
           all##file:///media/sdb5/repo/build/tmp/deploy/ipk/all \
	   ${MACHINE}##file:///media/sdb5/repo/build/tmp/deploy/ipk/${MACHINE} \
${TARGET_ARCH}##file:///media/sdb5/repo/build/tmp/deploy/ipk/${TARGET_ARCH} \
	   "
#6 lore raw
Quoted 11 lines · David Nyström

Oops, bug on my behalf in above example, but it still fails the same way when using a correct IPK_FEED_URI.

IPK_FEED_URIS += " \
           all##file:///media/sdb5/repo/build/tmp/deploy/ipk/all \
	   ${MACHINE}##file:///media/sdb5/repo/build/tmp/deploy/ipk/${MACHINE} \

${TARGET_ARCH}##file:///media/sdb5/repo/build/tmp/deploy/ipk/${TARGET_ARCH}

\
	   "

Ok, I succeeded to check this in master. Apparently, I understood this wrong. In my tests I was deleting the tmp/ and sstate-cache/ and I was not expecting the target packages to be re-built. It turns out that this entire process takes place but when the rootfs is created, the provided feeds are used... I learned something new today! :)

Regarding the refactored code, indeed, it does not work in this case. It always tries to create the index files in the deploy/ipk directory before continuing with the rootfs creation. I guess a condition should be added in the new code to check for BUILD_IMAGES_FROM_FEEDS and skip the index creation step... Shouldn't be hard to fix.

laurentiu

#7 lore raw
Quoted 9 lines · Laurentiu Palcu
Quoted 8 lines · David Nyström

Oops, bug on my behalf in above example, but it still fails the same way when using a correct IPK_FEED_URI.

IPK_FEED_URIS += " \
            all##file:///media/sdb5/repo/build/tmp/deploy/ipk/all \
	   ${MACHINE}##file:///media/sdb5/repo/build/tmp/deploy/ipk/${MACHINE} \
Quoted 8 lines
Quoted 3 lines

${TARGET_ARCH}##file:///media/sdb5/repo/build/tmp/deploy/ipk/${TARGET_ARCH}

\
	   "

Ok, I succeeded to check this in master. Apparently, I understood this wrong. In my tests I was deleting the tmp/ and sstate-cache/ and I was not expecting the target packages to be re-built. It turns out that this entire process takes place but when the rootfs is created, the provided feeds are used... I learned something new today! :)

Yes, if you only run bitbake -c rootfs core-image-minimal, no target packages _should_ be built. It so happens that a few will still be built, for unknown reasons. But this should be considered a bug. native and cross packages will of course be built regardless.

Quoted 5 lines

Regarding the refactored code, indeed, it does not work in this case. It always tries to create the index files in the deploy/ipk directory before continuing with the rootfs creation. I guess a condition should be added in the new code to check for BUILD_IMAGES_FROM_FEEDS and skip the index creation step... Shouldn't be hard to fix.

Thanks Laurentiu.

Quoted 6 lines

laurentiu
_______________________________________________
Openembedded-core mailing list
[email protected]
http://lists.openembedded.org/mailman/listinfo/openembedded-core

#8 lore raw

v2 cover Rootfs/image generation refactoring (cover letter only)

In reply to Laurentiu Palcu

V2:
* fix building from feeds for opkg;
* rebase;

Hi all,

First off: this large patchset adds no change in the rootfs/image creation functionality. The main logic is supposed to be the same as before. Also, I decided not to spam the list with this large patchset (49 patches) and I sent only the cover-letter. Those who want to take a peak at the code, can have a look by clicking the link below.

If people would like the patches sent to the list too, just say so.

Ok, what's it all about then? Here are the main changes:
* all the old bash shell code (more then 90% of it anyway) has been ported to Python. This would, hopefully, make the code more readable and allows us to use some of the Python powerful features. The following new files were born, together with a fair amount of changes in some bbclass'es:

Quoted 1 line

meta/lib/oe/manifest.py - implements the initial manifest creation (for now).

This is a file containing the list of packages going into the final image. In theory, we should be able to use this file later to re-generate the rootfs from a package feed, outside bitbake environment;

> meta/lib/oe/package_manager.py - implements the basic package management
API: install/remove packages, update index DB/index file creation. This is mainly used by Rootfs/Sdk classes in order to generate the rootfs;

> meta/lib/oe/rootfs.py - contains code for rootfs generation;

> meta/lib/oe/image.py - the image creation part;

> meta/lib/oe/sdk.py - populate the SDK target/host rootfs.

With the new code, the entire do_rootfs routine in image.bbclass has now just 3 function calls: create_manifest(), create_rootfs(), create_image(). In this order. Easier to debug just a certain part of the rootfs/image creation process.

* Some performance improvement has been obtained in 2 areas: index file creation and image generation. These operations were serial in the old code. Now, they're done in parallel.

* People complained about intercept scripts being hard to debug. That was because the old code used a log checking routine that scanned the logs for some standart error strings which were not necessarily errors. Hence, the intercepts had their stderr redirected to /dev/null. This was now removed since we can easily handle intercepts errors in python. So, errors will go to the log file.

That's about it. There is room for even further improvement, in the index creation part. I had some code in place for that but I had to remove it, temporarily, due to some synchronization issues. Hopefully, I'll find the issue and include that piece back.

The code was tested on my machine and on a local AB for x86, x86-64, arm, ppc, mips and build appliance. The builds and sanity tests finished successfully.

laurentiu

The following changes since commit 4e9eb77108c7e628ebd00ec848b8bc034802e197:

sstate: Improve funciton checksums (2014-02-04 22:51:43 +0000)

are available in the git repository at:

git://mirror.rb.intel.com/git.yoctoproject.org/poky-contrib lpalcu/rootfs_refactoring_ship_oecore

for you to fetch changes up to a1b0b0bac55a18ca40b37bb91a84b27529db39ec:

rootfs.py, package_manager.py, sdk.py: Fix building from feeds feature for opkg (2014-02-05 11:51:57 +0200)

----------------------------------------------------------------
Hongxu Jia (18):
lib/oe/manifest.py: add rpm image manifest creation
lib/oe/package_manager.py: support RpmPM
lib/oe/rootfs.py: support RpmRootfs
lib/oe/rootfs.py: Tweak the rootfs removing operation
rootfs.py: fix uninstall uneeded pkgs failed
rootfs.py: strip kernel-abiversion useless readline
lib/oe/image.py: fix get rootfs_extra_space failed image.bbclass/license.bbclass: ajustment list_installed_packages invoking license.bbclass: fix license_create_manifest failed
lib/oe/sdk.py: support RpmRootfs
image.bbclass/populate_sdk_base.bbclass: shift position of sdk complementary install definition Cleanup rootfs_rpm,package_rpm bbclass files
lib/oe/rootfs.py: fix invoking rpm _handle_intercept_failure failed lib/oe/package_manager.py: fix invoking rpm save_rpmpostinist failed lib/oe/rootfs.py: fix invoking _run_intercepts failed
populate_sdk_rpm.bbclass: remove old shell code
package_manger.py/rootfs.py: rename save_rpmpostinist with save_rpmpostinst lib/oe/package_manager.py: moving global SCRIPTLET_FORMAT and DB_CONFIG_CONTENT to RpmPM

Laurentiu Palcu (32):
lib/oe/utils.py: add pre/post process helper function lib/oe/image.py: add new image creation library lib/oe/manifest.py: add library for image manifest creation lib/oe/package_manager.py: add new package management library lib/oe/rootfs.py: add new library for rootfs creation
Activate the new python rootfs/image creation routines oe/manifest.py: Add manifest creation for opkg package_(deb|ipk).bbclass: remove the stamp when creating package from cache lib/oe/manifest.py: create global variables for package types lib/oe/package_manager.py: add deploy dir locking mechanism lib/oe/package_manager.py: use the bitbake APT_ARGS variable lib/oe/package_manager.py: add support for opkg backend lib/oe/rootfs.py: add support for opkg backend
Cleanup image,rootfs_ipk,package_ipk bbclass files
image.bbclass, lib/oe/rootfs.py: remove intercept_scripts directory lib/oe/manifest.py: create manifests for SDK too lib/oe/rootfs.py: use Manifest.INSTALL_ORDER lib/oe/package_manager.py: fixes for dpkg backend
lib/oe/sdk.py: add SDK class
populate_sdk_base.bbclass: activate the new python routines image.bbclass: change POPULATE_SDK_POST_TARGET_COMMAND populate_sdk_(deb|ipk).bbclass: remove old shell code lib/oe/package_manager.py: RpmPM fixes
lib/oe/rootfs.py: warn the user if intercept hooks fail scripts/postinst-intercepts: do not redirect errors to /dev/null lib/oe/package_manager.py: DpkgPM, use lock on deploy dir lib/oe/image.py: fix image size calculation routine lib/oe/package_manager.py: OpkgPM/DpkgPM fixes
lib/oe/rootfs.py: OpkgRootfs, fix issue in _get_delayed_postinsts() lib/oe/package_manager.py: do not use stamps lib/oe/package_manager.py: OpkgPM, bad recommendation handling change rootfs.py, package_manager.py, sdk.py: Fix building from feeds feature for opkg

 meta/classes/image.bbclass                      |  329 +-----
 meta/classes/image_types.bbclass                |  113 --
 meta/classes/license.bbclass                    |   16 +-
 meta/classes/package_deb.bbclass                |  151 +--
 meta/classes/package_ipk.bbclass                |  202 +---
 meta/classes/package_rpm.bbclass                |  472 --------
 meta/classes/populate_sdk_base.bbclass          |   63 +-
 meta/classes/populate_sdk_deb.bbclass           |   59 -
 meta/classes/populate_sdk_ipk.bbclass           |   54 -
 meta/classes/populate_sdk_rpm.bbclass           |  152 ---
 meta/classes/rootfs_deb.bbclass                 |  115 --
 meta/classes/rootfs_ipk.bbclass                 |  138 +--
 meta/classes/rootfs_rpm.bbclass                 |  184 ---
 meta/lib/oe/image.py                            |  239 ++++
 meta/lib/oe/manifest.py                         |  291 +++++
 meta/lib/oe/package_manager.py                  | 1369 +++++++++++++++++++++++
 meta/lib/oe/rootfs.py                           |  681 +++++++++++
 meta/lib/oe/sdk.py                              |  345 ++++++
 meta/lib/oe/utils.py                            |   12 +-
 scripts/postinst-intercepts/update_font_cache   |    2 +-
 scripts/postinst-intercepts/update_pixbuf_cache |    2 +-
 21 files changed, 3011 insertions(+), 1978 deletions(-)
 create mode 100644 meta/lib/oe/image.py
 create mode 100644 meta/lib/oe/manifest.py
 create mode 100644 meta/lib/oe/package_manager.py
 create mode 100644 meta/lib/oe/rootfs.py
 create mode 100644 meta/lib/oe/sdk.py

Hongxu Jia (18):
lib/oe/manifest.py: add rpm image manifest creation lib/oe/package_manager.py: support RpmPM lib/oe/rootfs.py: support RpmRootfs
lib/oe/rootfs.py: Tweak the rootfs removing operation rootfs.py: fix uninstall uneeded pkgs failed
rootfs.py: strip kernel-abiversion useless readline lib/oe/image.py: fix get rootfs_extra_space failed image.bbclass/license.bbclass: ajustment list_installed_packages
invoking
license.bbclass: fix license_create_manifest failed lib/oe/sdk.py: support RpmRootfs image.bbclass/populate_sdk_base.bbclass: shift position of sdk
complementary install definition
Cleanup rootfs_rpm,package_rpm bbclass files lib/oe/rootfs.py: fix invoking rpm _handle_intercept_failure failed lib/oe/package_manager.py: fix invoking rpm save_rpmpostinist failed lib/oe/rootfs.py: fix invoking _run_intercepts failed populate_sdk_rpm.bbclass: remove old shell code package_manger.py/rootfs.py: rename save_rpmpostinist with
save_rpmpostinst
lib/oe/package_manager.py: moving global SCRIPTLET_FORMAT and
DB_CONFIG_CONTENT to RpmPM

Laurentiu Palcu (32):
lib/oe/utils.py: add pre/post process helper function lib/oe/image.py: add new image creation library lib/oe/manifest.py: add library for image manifest creation lib/oe/package_manager.py: add new package management library lib/oe/rootfs.py: add new library for rootfs creation Activate the new python rootfs/image creation routines oe/manifest.py: Add manifest creation for opkg package_(deb|ipk).bbclass: remove the stamp when creating package
from cache
lib/oe/manifest.py: create global variables for package types lib/oe/package_manager.py: add deploy dir locking mechanism lib/oe/package_manager.py: use the bitbake APT_ARGS variable lib/oe/package_manager.py: add support for opkg backend lib/oe/rootfs.py: add support for opkg backend
Cleanup image,rootfs_ipk,package_ipk bbclass files image.bbclass, lib/oe/rootfs.py: remove intercept_scripts directory lib/oe/manifest.py: create manifests for SDK too lib/oe/rootfs.py: use Manifest.INSTALL_ORDER lib/oe/package_manager.py: fixes for dpkg backend lib/oe/sdk.py: add SDK class
populate_sdk_base.bbclass: activate the new python routines image.bbclass: change POPULATE_SDK_POST_TARGET_COMMAND populate_sdk_(deb|ipk).bbclass: remove old shell code lib/oe/package_manager.py: RpmPM fixes
lib/oe/rootfs.py: warn the user if intercept hooks fail scripts/postinst-intercepts: do not redirect errors to /dev/null lib/oe/package_manager.py: DpkgPM, use lock on deploy dir lib/oe/image.py: fix image size calculation routine lib/oe/package_manager.py: OpkgPM/DpkgPM fixes lib/oe/rootfs.py: OpkgRootfs, fix issue in _get_delayed_postinsts() lib/oe/package_manager.py: do not use stamps lib/oe/package_manager.py: OpkgPM, bad recommendation handling change rootfs.py, package_manager.py, sdk.py: Fix building from feeds
feature for opkg

 meta/classes/image.bbclass                      |  329 +-----
 meta/classes/image_types.bbclass                |  113 --
 meta/classes/license.bbclass                    |   16 +-
 meta/classes/package_deb.bbclass                |  151 +--
 meta/classes/package_ipk.bbclass                |  202 +---
 meta/classes/package_rpm.bbclass                |  472 --------
 meta/classes/populate_sdk_base.bbclass          |   63 +-
 meta/classes/populate_sdk_deb.bbclass           |   59 -
 meta/classes/populate_sdk_ipk.bbclass           |   54 -
 meta/classes/populate_sdk_rpm.bbclass           |  152 ---
 meta/classes/rootfs_deb.bbclass                 |  115 --
 meta/classes/rootfs_ipk.bbclass                 |  138 +--
 meta/classes/rootfs_rpm.bbclass                 |  184 ---
 meta/lib/oe/image.py                            |  239 ++++
 meta/lib/oe/manifest.py                         |  291 +++++
 meta/lib/oe/package_manager.py                  | 1369 +++++++++++++++++++++++
 meta/lib/oe/rootfs.py                           |  681 +++++++++++
 meta/lib/oe/sdk.py                              |  345 ++++++
 meta/lib/oe/utils.py                            |   12 +-
 scripts/postinst-intercepts/update_font_cache   |    2 +-
 scripts/postinst-intercepts/update_pixbuf_cache |    2 +-
 21 files changed, 3011 insertions(+), 1978 deletions(-)
 create mode 100644 meta/lib/oe/image.py
 create mode 100644 meta/lib/oe/manifest.py
 create mode 100644 meta/lib/oe/package_manager.py
 create mode 100644 meta/lib/oe/rootfs.py
 create mode 100644 meta/lib/oe/sdk.py
Signature · 1 line
1.7.9.5
#9 lore raw
Quoted 4 lines · Laurentiu Palcu

V2:
* fix building from feeds for opkg;
* rebase;

| NOTE: ###### Generate rootfs #######
| NOTE: Installing the following packages: run-postinsts packagegroup-core-boot

| sed: -e expression #1, char 41: unterminated address regex
| sed: -e expression #1, char 42: unterminated address regex
| sed: -e expression #1, char 41: unterminated address regex
| sed: -e expression #1, char 42: unterminated address regex

[david] Why are these seds failing ?, I've seen this in master aswell though.

| NOTE: Installing complementary packages ...
| NOTE: Installing the following packages:
| /media/sdb5/bld/tmp/sysroots/x86_64-linux/usr/bin/opkg-cl: the

``install'' command requires at least one argument
| NOTE: Unable to install packages. Command /media/sdb5/bld/tmp/sysroots/x86_64-linux/usr/bin/opkg-cl -f /media/sdb5/bld/tmp/work/qemuppc-poky-linux/core-image-minimal/1.0-r0/opkg.conf -o /media/sdb5/bld/tmp/work/qemuppc-poky-linux/core-image-minimal/1.0-r0/rootfs
--force_postinstall --prefer-arch-to-version install returned 1

| NOTE: Running intercept scripts:
| NOTE: Executing write_package_manifest ...
| DEBUG: Executing python function write_package_manifest
| NOTE: Building from feeds activated!
| NOTE: Add all feed with URL

file:///media/sdb5/oel/build/tmp/deploy/ipk/all | NOTE: Add qemuppc feed with URL file:///media/sdb5/oel/build/tmp/deploy/ipk/qemuppc | NOTE: Add ppc7400 feed with URL file:///media/sdb5/oel/build/tmp/deploy/ipk/ppc7400

| DEBUG: Python function write_package_manifest finished
| NOTE: Executing license_create_manifest ...
| DEBUG: Executing shell function license_create_manifest
| ls: cannot access
/media/sdb5/bld/tmp/sysroots/qemuppc/pkgdata/runtime-reverse/base-files: No
such file or directory
| readlink: missing operand
| Try 'readlink --help' for more information.
| basename: missing operand
| Try 'basename --help' for more information.
| WARNING: exit code 1 from a shell command.
| DEBUG: Python function do_rootfs finished
| ERROR: Function failed: license_create_manifest (log file is located at

/media/sdb5/bld/tmp/work/qemuppc-poky-linux/core-image-minimal/1.0-r0/temp/log.do_rootfs.29007)
ERROR: Task 6 (/media/sdb5/poky-contrib/meta/recipes-core/images/ core-image-minimal.bb, do_rootfs) failed with exit code '1'
NOTE: Tasks Summary: Attempted 504 tasks of which 503 didn't need to be
rerun and 1 failed.

Summary: 1 task failed:
/media/sdb5/poky-contrib/meta/recipes-core/images/core-image-minimal.bb,
do_rootfs
Summary: There was 1 ERROR message shown, returning a non-zero exit code

Br,
David

#10 lore raw
Quoted 11 lines · David Nystrom
Quoted 4 lines · Laurentiu Palcu

V2:
* fix building from feeds for opkg;
* rebase;

| NOTE: ###### Generate rootfs #######
| NOTE: Installing the following packages: run-postinsts packagegroup-core-boot

Quoted 7 lines
| sed: -e expression #1, char 41: unterminated address regex
| sed: -e expression #1, char 42: unterminated address regex
| sed: -e expression #1, char 41: unterminated address regex
| sed: -e expression #1, char 42: unterminated address regex

[david] Why are these seds failing ?, I've seen this in master aswell though.

After testing with the yocto 1.5 repo, the postinstall sed failures where not seen anymore. Added Bug:
https://bugzilla.yoctoproject.org/show_bug.cgi?id=5789

Quoted 40 lines
| NOTE: Installing complementary packages ...
| NOTE: Installing the following packages:
| /media/sdb5/bld/tmp/sysroots/x86_64-linux/usr/bin/opkg-cl: the

``install'' command requires at least one argument
| NOTE: Unable to install packages. Command /media/sdb5/bld/tmp/sysroots/x86_64-linux/usr/bin/opkg-cl -f /media/sdb5/bld/tmp/work/qemuppc-poky-linux/core-image-minimal/1.0-r0/opkg.conf -o /media/sdb5/bld/tmp/work/qemuppc-poky-linux/core-image-minimal/1.0-r0/rootfs
--force_postinstall --prefer-arch-to-version install returned 1

| NOTE: Running intercept scripts:
| NOTE: Executing write_package_manifest ...
| DEBUG: Executing python function write_package_manifest
| NOTE: Building from feeds activated!
| NOTE: Add all feed with URL

file:///media/sdb5/oel/build/tmp/deploy/ipk/all | NOTE: Add qemuppc feed with URL file:///media/sdb5/oel/build/tmp/deploy/ipk/qemuppc | NOTE: Add ppc7400 feed with URL file:///media/sdb5/oel/build/tmp/deploy/ipk/ppc7400

| DEBUG: Python function write_package_manifest finished
| NOTE: Executing license_create_manifest ...
| DEBUG: Executing shell function license_create_manifest
| ls: cannot access
/media/sdb5/bld/tmp/sysroots/qemuppc/pkgdata/runtime-reverse/base-files: No
such file or directory
| readlink: missing operand
| Try 'readlink --help' for more information.
| basename: missing operand
| Try 'basename --help' for more information.
| WARNING: exit code 1 from a shell command.
| DEBUG: Python function do_rootfs finished
| ERROR: Function failed: license_create_manifest (log file is located at

/media/sdb5/bld/tmp/work/qemuppc-poky-linux/core-image-minimal/1.0-r0/temp/log.do_rootfs.29007)
ERROR: Task 6 (/media/sdb5/poky-contrib/meta/recipes-core/images/ core-image-minimal.bb, do_rootfs) failed with exit code '1'
NOTE: Tasks Summary: Attempted 504 tasks of which 503 didn't need to be
rerun and 1 failed.

Quoted 8 lines

Summary: 1 task failed:
/media/sdb5/poky-contrib/meta/recipes-core/images/core-image-minimal.bb,
do_rootfs
Summary: There was 1 ERROR message shown, returning a non-zero exit code

Br,
David

FYI: to easily recreate this testcase:

-Clean build env-

$ grep -C 6 -r FEEDS conf/local.conf
# Default to setting automatically based on cpu count
PARALLEL_MAKE ?= "-j ${@oe.utils.cpu_count()}"
#
# For a quad-core machine, BB_NUMBER_THREADS = "4", PARALLEL_MAKE = "-j 4" would
# be appropriate for example.

BUILD_IMAGES_FROM_FEEDS="1"
IPK_FEED_URIS = " \

all##http://downloads.yoctoproject.org/releases/yocto/yocto-1.5/ipk/all \

${MACHINE}##http://downloads.yoctoproject.org/releases/yocto/yocto-1.5/ipk/${MACHINE} \

ppc7400##http://downloads.yoctoproject.org/releases/yocto/yocto-1.5/ipk/ppc7400 \
	   "

PACKAGE_CLASSES="ipk" MACHINE="qemuppc" bitbake -c rootfs core-image-minimal

Br,
David

#11 lore raw
Quoted 11 lines · David Nyström
Quoted 11 lines
| NOTE: Installing complementary packages ...
| NOTE: Installing the following packages:
| /media/sdb5/bld/tmp/sysroots/x86_64-linux/usr/bin/opkg-cl: the

``install'' command requires at least one argument
| NOTE: Unable to install packages. Command /media/sdb5/bld/tmp/sysroots/x86_64-linux/usr/bin/opkg-cl -f /media/sdb5/bld/tmp/work/qemuppc-poky-linux/core-image-minimal/1.0-r0/opkg.conf -o /media/sdb5/bld/tmp/work/qemuppc-poky-linux/core-image-minimal/1.0-r0/rootfs
--force_postinstall --prefer-arch-to-version install returned 1

I'll send a quick fix for this. This, however, is not the reason of the build failure. It's complementary packages that are installed and an empty list is passed to install(). Since these are attempt only packages, the build does not fail because of this. Anyway, I added a simple check and I will send a v3.

Quoted 16 lines
Quoted 16 lines
| NOTE: Running intercept scripts:
| NOTE: Executing write_package_manifest ...
| DEBUG: Executing python function write_package_manifest
| NOTE: Building from feeds activated!
| NOTE: Add all feed with URL

file:///media/sdb5/oel/build/tmp/deploy/ipk/all | NOTE: Add qemuppc feed with URL file:///media/sdb5/oel/build/tmp/deploy/ipk/qemuppc | NOTE: Add ppc7400 feed with URL file:///media/sdb5/oel/build/tmp/deploy/ipk/ppc7400

| DEBUG: Python function write_package_manifest finished
| NOTE: Executing license_create_manifest ...
| DEBUG: Executing shell function license_create_manifest
| ls: cannot access

/media/sdb5/bld/tmp/sysroots/qemuppc/pkgdata/runtime-reverse/base-files: No such file or directory

Quoted 8 lines
Quoted 8 lines
| readlink: missing operand
| Try 'readlink --help' for more information.
| basename: missing operand
| Try 'basename --help' for more information.
| WARNING: exit code 1 from a shell command.
| DEBUG: Python function do_rootfs finished
| ERROR: Function failed: license_create_manifest (log file is located at

/media/sdb5/bld/tmp/work/qemuppc-poky-linux/core-image-minimal/1.0-r0/temp/log.do_rootfs.29007)

Now, this is the interesting part which, btw, happens on master too. That's because you're installing from feeds and you're installing an older version that has different packages than the latest (these are read from package.manifest). The YP 1.5 core-image-minimal package.manifest contains update-alternatives-cworth. The latest core-image-minimal does not contain this package anymore. It contains update-alternatives-opkg.

The easiest way would be to add a check in license_create_manifest() to just ignore packages that cannot be found. However, since we're dealing with licenses here, I honestly don't know if this is the right way of doing it...

laurentiu

#12 lore raw
Quoted 36 lines · Laurentiu Palcu
Quoted 8 lines · David Nyström
Quoted 7 lines
| NOTE: Installing complementary packages ...
| NOTE: Installing the following packages:
| /media/sdb5/bld/tmp/sysroots/x86_64-linux/usr/bin/opkg-cl: the

``install'' command requires at least one argument | NOTE: Unable to install packages. Command /media/sdb5/bld/tmp/sysroots/x86_64-linux/usr/bin/opkg-cl -f

/media/sdb5/bld/tmp/work/qemuppc-poky-linux/core-image-minimal/1.0-r0/opkg.conf

Quoted 2 lines
Quoted 1 line

-o

/media/sdb5/bld/tmp/work/qemuppc-poky-linux/core-image-minimal/1.0-r0/rootfs

Quoted 1 line
Quoted 1 line

--force_postinstall --prefer-arch-to-version install returned 1

I'll send a quick fix for this. This, however, is not the reason of the build failure. It's complementary packages that are installed and an empty list is passed to install(). Since these are attempt only packages, the build does not fail because of this. Anyway, I added a simple check and I will send a v3.

Quoted 6 lines
Quoted 6 lines
| NOTE: Running intercept scripts:
| NOTE: Executing write_package_manifest ...
| DEBUG: Executing python function write_package_manifest
| NOTE: Building from feeds activated!
| NOTE: Add all feed with URL

file:///media/sdb5/oel/build/tmp/deploy/ipk/all

Quoted 9 lines
Quoted 8 lines

| NOTE: Add qemuppc feed with URL file:///media/sdb5/oel/build/tmp/deploy/ipk/qemuppc | NOTE: Add ppc7400 feed with URL file:///media/sdb5/oel/build/tmp/deploy/ipk/ppc7400

| DEBUG: Python function write_package_manifest finished
| NOTE: Executing license_create_manifest ...
| DEBUG: Executing shell function license_create_manifest
| ls: cannot access
Quoted 9 lines

/media/sdb5/bld/tmp/sysroots/qemuppc/pkgdata/runtime-reverse/base-files: No

Quoted 8 lines
Quoted 8 lines

such file or directory

| readlink: missing operand
| Try 'readlink --help' for more information.
| basename: missing operand
| Try 'basename --help' for more information.
| WARNING: exit code 1 from a shell command.
| DEBUG: Python function do_rootfs finished
| ERROR: Function failed: license_create_manifest (log file is located

at

Quoted 3 lines
Quoted 1 line

/media/sdb5/bld/tmp/work/qemuppc-poky-linux/core-image-minimal/1.0-r0/temp/log.do_rootfs.29007) Now, this is the interesting part which, btw, happens on master too.

That's

Quoted 5 lines

because you're installing from feeds and you're installing an older version that has different packages than the latest (these are read from package.manifest). The YP 1.5 core-image-minimal package.manifest contains update-alternatives-cworth. The latest core-image-minimal does not contain this package anymore. It contains update-alternatives-opkg.

Thanks Laurentiu,
The 1.5 repo reference was just to give you an easy testcase. Sorry for creating confusion.
My debug run above was done with a repo created by poky on the master branch.

Quoted 5 lines

The easiest way would be to add a check in license_create_manifest() to just ignore packages that cannot be found. However, since we're dealing with licenses here, I honestly don't know if this is the right way of doing it...

Good point, I think it might be better to avoid creating a manifest, rather than creating a potentially bogus manifest when using the FEEDS functionality.

The per-package licenses should be already existing in the repo when using a feed.

//DD

Br,
David

Quoted 6 lines

laurentiu
_______________________________________________
Openembedded-core mailing list
[email protected]
http://lists.openembedded.org/mailman/listinfo/openembedded-core

#13 lore raw

v3 cover Rootfs/image generation refactoring (cover letter only)

In reply to Laurentiu Palcu

V3:
* add simple check to just return if we're attempting to install packages and the list is empty;

V2:
* fix building from feeds for opkg;
* rebase;

Hi all,

First off: this large patchset adds no change in the rootfs/image creation functionality. The main logic is supposed to be the same as before. Also, I decided not to spam the list with this large patchset (49 patches) and I sent only the cover-letter. Those who want to take a peak at the code, can have a look by clicking the link below.

If people would like the patches sent to the list too, just say so.

Ok, what's it all about then? Here are the main changes:
* all the old bash shell code (more then 90% of it anyway) has been ported to Python. This would, hopefully, make the code more readable and allows us to use some of the Python powerful features. The following new files were born, together with a fair amount of changes in some bbclass'es:

Quoted 1 line

meta/lib/oe/manifest.py - implements the initial manifest creation (for now).

This is a file containing the list of packages going into the final image. In theory, we should be able to use this file later to re-generate the rootfs from a package feed, outside bitbake environment;

> meta/lib/oe/package_manager.py - implements the basic package management
API: install/remove packages, update index DB/index file creation. This is mainly used by Rootfs/Sdk classes in order to generate the rootfs;

> meta/lib/oe/rootfs.py - contains code for rootfs generation;

> meta/lib/oe/image.py - the image creation part;

> meta/lib/oe/sdk.py - populate the SDK target/host rootfs.

With the new code, the entire do_rootfs routine in image.bbclass has now just 3 function calls: create_manifest(), create_rootfs(), create_image(). In this order. Easier to debug just a certain part of the rootfs/image creation process.

* Some performance improvement has been obtained in 2 areas: index file creation and image generation. These operations were serial in the old code. Now, they're done in parallel.

* People complained about intercept scripts being hard to debug. That was because the old code used a log checking routine that scanned the logs for some standart error strings which were not necessarily errors. Hence, the intercepts had their stderr redirected to /dev/null. This was now removed since we can easily handle intercepts errors in python. So, errors will go to the log file.

That's about it. There is room for even further improvement, in the index creation part. I had some code in place for that but I had to remove it, temporarily, due to some synchronization issues. Hopefully, I'll find the issue and include that piece back.

The code was tested on my machine and on a local AB for x86, x86-64, arm, ppc, mips and build appliance. The builds and sanity tests finished successfully.

laurentiu

The following changes since commit 4e9eb77108c7e628ebd00ec848b8bc034802e197:

sstate: Improve funciton checksums (2014-02-04 22:51:43 +0000)

are available in the git repository at:

git://mirror.rb.intel.com/git.yoctoproject.org/poky-contrib lpalcu/rootfs_refactoring_ship_oecore

for you to fetch changes up to 8a4a72dae5b3b9452f20d1c45fdf196ae450aaf7:

lib/oe/package_manager.py: check that package list is not empty (2014-02-05 16:57:52 +0200)

----------------------------------------------------------------
Hongxu Jia (18):
lib/oe/manifest.py: add rpm image manifest creation
lib/oe/package_manager.py: support RpmPM
lib/oe/rootfs.py: support RpmRootfs
lib/oe/rootfs.py: Tweak the rootfs removing operation
rootfs.py: fix uninstall uneeded pkgs failed
rootfs.py: strip kernel-abiversion useless readline
lib/oe/image.py: fix get rootfs_extra_space failed image.bbclass/license.bbclass: ajustment list_installed_packages invoking license.bbclass: fix license_create_manifest failed
lib/oe/sdk.py: support RpmRootfs
image.bbclass/populate_sdk_base.bbclass: shift position of sdk complementary install definition Cleanup rootfs_rpm,package_rpm bbclass files
lib/oe/rootfs.py: fix invoking rpm _handle_intercept_failure failed lib/oe/package_manager.py: fix invoking rpm save_rpmpostinist failed lib/oe/rootfs.py: fix invoking _run_intercepts failed
populate_sdk_rpm.bbclass: remove old shell code
package_manger.py/rootfs.py: rename save_rpmpostinist with save_rpmpostinst lib/oe/package_manager.py: moving global SCRIPTLET_FORMAT and DB_CONFIG_CONTENT to RpmPM

Laurentiu Palcu (33):
lib/oe/utils.py: add pre/post process helper function lib/oe/image.py: add new image creation library lib/oe/manifest.py: add library for image manifest creation lib/oe/package_manager.py: add new package management library lib/oe/rootfs.py: add new library for rootfs creation
Activate the new python rootfs/image creation routines oe/manifest.py: Add manifest creation for opkg package_(deb|ipk).bbclass: remove the stamp when creating package from cache lib/oe/manifest.py: create global variables for package types lib/oe/package_manager.py: add deploy dir locking mechanism lib/oe/package_manager.py: use the bitbake APT_ARGS variable lib/oe/package_manager.py: add support for opkg backend lib/oe/rootfs.py: add support for opkg backend
Cleanup image,rootfs_ipk,package_ipk bbclass files
image.bbclass, lib/oe/rootfs.py: remove intercept_scripts directory lib/oe/manifest.py: create manifests for SDK too lib/oe/rootfs.py: use Manifest.INSTALL_ORDER lib/oe/package_manager.py: fixes for dpkg backend
lib/oe/sdk.py: add SDK class
populate_sdk_base.bbclass: activate the new python routines image.bbclass: change POPULATE_SDK_POST_TARGET_COMMAND populate_sdk_(deb|ipk).bbclass: remove old shell code lib/oe/package_manager.py: RpmPM fixes
lib/oe/rootfs.py: warn the user if intercept hooks fail scripts/postinst-intercepts: do not redirect errors to /dev/null lib/oe/package_manager.py: DpkgPM, use lock on deploy dir lib/oe/image.py: fix image size calculation routine lib/oe/package_manager.py: OpkgPM/DpkgPM fixes
lib/oe/rootfs.py: OpkgRootfs, fix issue in _get_delayed_postinsts() lib/oe/package_manager.py: do not use stamps lib/oe/package_manager.py: OpkgPM, bad recommendation handling change rootfs.py, package_manager.py, sdk.py: Fix building from feeds feature for opkg lib/oe/package_manager.py: check that package list is not empty

 meta/classes/image.bbclass                      |  329 +-----
 meta/classes/image_types.bbclass                |  113 --
 meta/classes/license.bbclass                    |   16 +-
 meta/classes/package_deb.bbclass                |  151 +--
 meta/classes/package_ipk.bbclass                |  202 +---
 meta/classes/package_rpm.bbclass                |  472 --------
 meta/classes/populate_sdk_base.bbclass          |   63 +-
 meta/classes/populate_sdk_deb.bbclass           |   59 -
 meta/classes/populate_sdk_ipk.bbclass           |   54 -
 meta/classes/populate_sdk_rpm.bbclass           |  152 ---
 meta/classes/rootfs_deb.bbclass                 |  115 --
 meta/classes/rootfs_ipk.bbclass                 |  138 +--
 meta/classes/rootfs_rpm.bbclass                 |  184 ---
 meta/lib/oe/image.py                            |  239 ++++
 meta/lib/oe/manifest.py                         |  291 +++++
 meta/lib/oe/package_manager.py                  | 1375 +++++++++++++++++++++++
 meta/lib/oe/rootfs.py                           |  681 +++++++++++
 meta/lib/oe/sdk.py                              |  345 ++++++
 meta/lib/oe/utils.py                            |   12 +-
 scripts/postinst-intercepts/update_font_cache   |    2 +-
 scripts/postinst-intercepts/update_pixbuf_cache |    2 +-
 21 files changed, 3017 insertions(+), 1978 deletions(-)
 create mode 100644 meta/lib/oe/image.py
 create mode 100644 meta/lib/oe/manifest.py
 create mode 100644 meta/lib/oe/package_manager.py
 create mode 100644 meta/lib/oe/rootfs.py
 create mode 100644 meta/lib/oe/sdk.py

Hongxu Jia (18):
lib/oe/manifest.py: add rpm image manifest creation lib/oe/package_manager.py: support RpmPM lib/oe/rootfs.py: support RpmRootfs
lib/oe/rootfs.py: Tweak the rootfs removing operation rootfs.py: fix uninstall uneeded pkgs failed
rootfs.py: strip kernel-abiversion useless readline lib/oe/image.py: fix get rootfs_extra_space failed image.bbclass/license.bbclass: ajustment list_installed_packages
invoking
license.bbclass: fix license_create_manifest failed lib/oe/sdk.py: support RpmRootfs image.bbclass/populate_sdk_base.bbclass: shift position of sdk
complementary install definition
Cleanup rootfs_rpm,package_rpm bbclass files lib/oe/rootfs.py: fix invoking rpm _handle_intercept_failure failed lib/oe/package_manager.py: fix invoking rpm save_rpmpostinist failed lib/oe/rootfs.py: fix invoking _run_intercepts failed populate_sdk_rpm.bbclass: remove old shell code package_manger.py/rootfs.py: rename save_rpmpostinist with
save_rpmpostinst
lib/oe/package_manager.py: moving global SCRIPTLET_FORMAT and
DB_CONFIG_CONTENT to RpmPM

Laurentiu Palcu (33):
lib/oe/utils.py: add pre/post process helper function lib/oe/image.py: add new image creation library lib/oe/manifest.py: add library for image manifest creation lib/oe/package_manager.py: add new package management library lib/oe/rootfs.py: add new library for rootfs creation Activate the new python rootfs/image creation routines oe/manifest.py: Add manifest creation for opkg package_(deb|ipk).bbclass: remove the stamp when creating package
from cache
lib/oe/manifest.py: create global variables for package types lib/oe/package_manager.py: add deploy dir locking mechanism lib/oe/package_manager.py: use the bitbake APT_ARGS variable lib/oe/package_manager.py: add support for opkg backend lib/oe/rootfs.py: add support for opkg backend
Cleanup image,rootfs_ipk,package_ipk bbclass files image.bbclass, lib/oe/rootfs.py: remove intercept_scripts directory lib/oe/manifest.py: create manifests for SDK too lib/oe/rootfs.py: use Manifest.INSTALL_ORDER lib/oe/package_manager.py: fixes for dpkg backend lib/oe/sdk.py: add SDK class
populate_sdk_base.bbclass: activate the new python routines image.bbclass: change POPULATE_SDK_POST_TARGET_COMMAND populate_sdk_(deb|ipk).bbclass: remove old shell code lib/oe/package_manager.py: RpmPM fixes
lib/oe/rootfs.py: warn the user if intercept hooks fail scripts/postinst-intercepts: do not redirect errors to /dev/null lib/oe/package_manager.py: DpkgPM, use lock on deploy dir lib/oe/image.py: fix image size calculation routine lib/oe/package_manager.py: OpkgPM/DpkgPM fixes lib/oe/rootfs.py: OpkgRootfs, fix issue in _get_delayed_postinsts() lib/oe/package_manager.py: do not use stamps lib/oe/package_manager.py: OpkgPM, bad recommendation handling change rootfs.py, package_manager.py, sdk.py: Fix building from feeds
feature for opkg
lib/oe/package_manager.py: check that package list is not empty

 meta/classes/image.bbclass                      |  329 +-----
 meta/classes/image_types.bbclass                |  113 --
 meta/classes/license.bbclass                    |   16 +-
 meta/classes/package_deb.bbclass                |  151 +--
 meta/classes/package_ipk.bbclass                |  202 +---
 meta/classes/package_rpm.bbclass                |  472 --------
 meta/classes/populate_sdk_base.bbclass          |   63 +-
 meta/classes/populate_sdk_deb.bbclass           |   59 -
 meta/classes/populate_sdk_ipk.bbclass           |   54 -
 meta/classes/populate_sdk_rpm.bbclass           |  152 ---
 meta/classes/rootfs_deb.bbclass                 |  115 --
 meta/classes/rootfs_ipk.bbclass                 |  138 +--
 meta/classes/rootfs_rpm.bbclass                 |  184 ---
 meta/lib/oe/image.py                            |  239 ++++
 meta/lib/oe/manifest.py                         |  291 +++++
 meta/lib/oe/package_manager.py                  | 1375 +++++++++++++++++++++++
 meta/lib/oe/rootfs.py                           |  681 +++++++++++
 meta/lib/oe/sdk.py                              |  345 ++++++
 meta/lib/oe/utils.py                            |   12 +-
 scripts/postinst-intercepts/update_font_cache   |    2 +-
 scripts/postinst-intercepts/update_pixbuf_cache |    2 +-
 21 files changed, 3017 insertions(+), 1978 deletions(-)
 create mode 100644 meta/lib/oe/image.py
 create mode 100644 meta/lib/oe/manifest.py
 create mode 100644 meta/lib/oe/package_manager.py
 create mode 100644 meta/lib/oe/rootfs.py
 create mode 100644 meta/lib/oe/sdk.py
Signature · 1 line
1.7.9.5
#14 lore raw

v4 cover Rootfs/image generation refactoring (cover letter only)

V4:
* fix multilib build issue for RPM backend;

V3:
* add simple check to just return if we're attempting to install packages and the list is empty;

V2:
* fix building from feeds for opkg;
* rebase;

Hi all,

First off: this large patchset adds no change in the rootfs/image creation functionality. The main logic is supposed to be the same as before. Also, I decided not to spam the list with this large patchset (49 patches) and I sent only the cover-letter. Those who want to take a peak at the code, can have a look by clicking the link below.

If people would like the patches sent to the list too, just say so.

Ok, what's it all about then? Here are the main changes:
* all the old bash shell code (more then 90% of it anyway) has been ported to Python. This would, hopefully, make the code more readable and allows us to use some of the Python powerful features. The following new files were born, together with a fair amount of changes in some bbclass'es:

Quoted 1 line

meta/lib/oe/manifest.py - implements the initial manifest creation (for now).

This is a file containing the list of packages going into the final image. In theory, we should be able to use this file later to re-generate the rootfs from a package feed, outside bitbake environment;

> meta/lib/oe/package_manager.py - implements the basic package management
API: install/remove packages, update index DB/index file creation. This is mainly used by Rootfs/Sdk classes in order to generate the rootfs;

> meta/lib/oe/rootfs.py - contains code for rootfs generation;

> meta/lib/oe/image.py - the image creation part;

> meta/lib/oe/sdk.py - populate the SDK target/host rootfs.

With the new code, the entire do_rootfs routine in image.bbclass has now just 3 function calls: create_manifest(), create_rootfs(), create_image(). In this order. Easier to debug just a certain part of the rootfs/image creation process.

* Some performance improvement has been obtained in 2 areas: index file creation and image generation. These operations were serial in the old code. Now, they're done in parallel.

* People complained about intercept scripts being hard to debug. That was because the old code used a log checking routine that scanned the logs for some standart error strings which were not necessarily errors. Hence, the intercepts had their stderr redirected to /dev/null. This was now removed since we can easily handle intercepts errors in python. So, errors will go to the log file.

That's about it. There is room for even further improvement, in the index creation part. I had some code in place for that but I had to remove it, temporarily, due to some synchronization issues. Hopefully, I'll find the issue and include that piece back.

The code was tested on my machine and on a local AB for x86, x86-64, arm, ppc, mips and build appliance. The builds and sanity tests finished successfully.

laurentiu

The following changes since commit 4e9eb77108c7e628ebd00ec848b8bc034802e197:

sstate: Improve funciton checksums (2014-02-04 22:51:43 +0000)

are available in the git repository at:

git://mirror.rb.intel.com/git.yoctoproject.org/poky-contrib lpalcu/rootfs_refactoring_ship_oecore

for you to fetch changes up to b4891e7c5e02e687f037babc823cdbf7cff471a4:

lib/oe/package_manager.py: RpmPM: fix issue with multilib builds (2014-02-10 09:38:45 +0200)

----------------------------------------------------------------
Hongxu Jia (18):
lib/oe/manifest.py: add rpm image manifest creation
lib/oe/package_manager.py: support RpmPM
lib/oe/rootfs.py: support RpmRootfs
lib/oe/rootfs.py: Tweak the rootfs removing operation
rootfs.py: fix uninstall uneeded pkgs failed
rootfs.py: strip kernel-abiversion useless readline
lib/oe/image.py: fix get rootfs_extra_space failed image.bbclass/license.bbclass: ajustment list_installed_packages invoking license.bbclass: fix license_create_manifest failed
lib/oe/sdk.py: support RpmRootfs
image.bbclass/populate_sdk_base.bbclass: shift position of sdk complementary install definition Cleanup rootfs_rpm,package_rpm bbclass files
lib/oe/rootfs.py: fix invoking rpm _handle_intercept_failure failed lib/oe/package_manager.py: fix invoking rpm save_rpmpostinist failed lib/oe/rootfs.py: fix invoking _run_intercepts failed
populate_sdk_rpm.bbclass: remove old shell code
package_manger.py/rootfs.py: rename save_rpmpostinist with save_rpmpostinst lib/oe/package_manager.py: moving global SCRIPTLET_FORMAT and DB_CONFIG_CONTENT to RpmPM

Laurentiu Palcu (34):
lib/oe/utils.py: add pre/post process helper function lib/oe/image.py: add new image creation library lib/oe/manifest.py: add library for image manifest creation lib/oe/package_manager.py: add new package management library lib/oe/rootfs.py: add new library for rootfs creation
Activate the new python rootfs/image creation routines oe/manifest.py: Add manifest creation for opkg package_(deb|ipk).bbclass: remove the stamp when creating package from cache lib/oe/manifest.py: create global variables for package types lib/oe/package_manager.py: add deploy dir locking mechanism lib/oe/package_manager.py: use the bitbake APT_ARGS variable lib/oe/package_manager.py: add support for opkg backend lib/oe/rootfs.py: add support for opkg backend
Cleanup image,rootfs_ipk,package_ipk bbclass files
image.bbclass, lib/oe/rootfs.py: remove intercept_scripts directory lib/oe/manifest.py: create manifests for SDK too lib/oe/rootfs.py: use Manifest.INSTALL_ORDER lib/oe/package_manager.py: fixes for dpkg backend
lib/oe/sdk.py: add SDK class
populate_sdk_base.bbclass: activate the new python routines image.bbclass: change POPULATE_SDK_POST_TARGET_COMMAND populate_sdk_(deb|ipk).bbclass: remove old shell code lib/oe/package_manager.py: RpmPM fixes
lib/oe/rootfs.py: warn the user if intercept hooks fail scripts/postinst-intercepts: do not redirect errors to /dev/null lib/oe/package_manager.py: DpkgPM, use lock on deploy dir lib/oe/image.py: fix image size calculation routine lib/oe/package_manager.py: OpkgPM/DpkgPM fixes
lib/oe/rootfs.py: OpkgRootfs, fix issue in _get_delayed_postinsts() lib/oe/package_manager.py: do not use stamps lib/oe/package_manager.py: OpkgPM, bad recommendation handling change rootfs.py, package_manager.py, sdk.py: Fix building from feeds feature for opkg lib/oe/package_manager.py: check that package list is not empty lib/oe/package_manager.py: RpmPM: fix issue with multilib builds

 meta/classes/image.bbclass                      |  329 +-----
 meta/classes/image_types.bbclass                |  113 --
 meta/classes/license.bbclass                    |   16 +-
 meta/classes/package_deb.bbclass                |  151 +--
 meta/classes/package_ipk.bbclass                |  202 +---
 meta/classes/package_rpm.bbclass                |  472 --------
 meta/classes/populate_sdk_base.bbclass          |   63 +-
 meta/classes/populate_sdk_deb.bbclass           |   59 -
 meta/classes/populate_sdk_ipk.bbclass           |   54 -
 meta/classes/populate_sdk_rpm.bbclass           |  152 ---
 meta/classes/rootfs_deb.bbclass                 |  115 --
 meta/classes/rootfs_ipk.bbclass                 |  138 +--
 meta/classes/rootfs_rpm.bbclass                 |  184 ---
 meta/lib/oe/image.py                            |  239 ++++
 meta/lib/oe/manifest.py                         |  291 +++++
 meta/lib/oe/package_manager.py                  | 1374 +++++++++++++++++++++++
 meta/lib/oe/rootfs.py                           |  681 +++++++++++
 meta/lib/oe/sdk.py                              |  345 ++++++
 meta/lib/oe/utils.py                            |   12 +-
 scripts/postinst-intercepts/update_font_cache   |    2 +-
 scripts/postinst-intercepts/update_pixbuf_cache |    2 +-
 21 files changed, 3016 insertions(+), 1978 deletions(-)
 create mode 100644 meta/lib/oe/image.py
 create mode 100644 meta/lib/oe/manifest.py
 create mode 100644 meta/lib/oe/package_manager.py
 create mode 100644 meta/lib/oe/rootfs.py
 create mode 100644 meta/lib/oe/sdk.py

Hongxu Jia (18):
lib/oe/manifest.py: add rpm image manifest creation lib/oe/package_manager.py: support RpmPM lib/oe/rootfs.py: support RpmRootfs
lib/oe/rootfs.py: Tweak the rootfs removing operation rootfs.py: fix uninstall uneeded pkgs failed
rootfs.py: strip kernel-abiversion useless readline lib/oe/image.py: fix get rootfs_extra_space failed image.bbclass/license.bbclass: ajustment list_installed_packages
invoking
license.bbclass: fix license_create_manifest failed lib/oe/sdk.py: support RpmRootfs image.bbclass/populate_sdk_base.bbclass: shift position of sdk
complementary install definition
Cleanup rootfs_rpm,package_rpm bbclass files lib/oe/rootfs.py: fix invoking rpm _handle_intercept_failure failed lib/oe/package_manager.py: fix invoking rpm save_rpmpostinist failed lib/oe/rootfs.py: fix invoking _run_intercepts failed populate_sdk_rpm.bbclass: remove old shell code package_manger.py/rootfs.py: rename save_rpmpostinist with
save_rpmpostinst
lib/oe/package_manager.py: moving global SCRIPTLET_FORMAT and
DB_CONFIG_CONTENT to RpmPM

Laurentiu Palcu (34):
lib/oe/utils.py: add pre/post process helper function lib/oe/image.py: add new image creation library lib/oe/manifest.py: add library for image manifest creation lib/oe/package_manager.py: add new package management library lib/oe/rootfs.py: add new library for rootfs creation Activate the new python rootfs/image creation routines oe/manifest.py: Add manifest creation for opkg package_(deb|ipk).bbclass: remove the stamp when creating package
from cache
lib/oe/manifest.py: create global variables for package types lib/oe/package_manager.py: add deploy dir locking mechanism lib/oe/package_manager.py: use the bitbake APT_ARGS variable lib/oe/package_manager.py: add support for opkg backend lib/oe/rootfs.py: add support for opkg backend
Cleanup image,rootfs_ipk,package_ipk bbclass files image.bbclass, lib/oe/rootfs.py: remove intercept_scripts directory lib/oe/manifest.py: create manifests for SDK too lib/oe/rootfs.py: use Manifest.INSTALL_ORDER lib/oe/package_manager.py: fixes for dpkg backend lib/oe/sdk.py: add SDK class
populate_sdk_base.bbclass: activate the new python routines image.bbclass: change POPULATE_SDK_POST_TARGET_COMMAND populate_sdk_(deb|ipk).bbclass: remove old shell code lib/oe/package_manager.py: RpmPM fixes
lib/oe/rootfs.py: warn the user if intercept hooks fail scripts/postinst-intercepts: do not redirect errors to /dev/null lib/oe/package_manager.py: DpkgPM, use lock on deploy dir lib/oe/image.py: fix image size calculation routine lib/oe/package_manager.py: OpkgPM/DpkgPM fixes lib/oe/rootfs.py: OpkgRootfs, fix issue in _get_delayed_postinsts() lib/oe/package_manager.py: do not use stamps lib/oe/package_manager.py: OpkgPM, bad recommendation handling change rootfs.py, package_manager.py, sdk.py: Fix building from feeds
feature for opkg
lib/oe/package_manager.py: check that package list is not empty lib/oe/package_manager.py: RpmPM: fix issue with multilib builds

 meta/classes/image.bbclass                      |  329 +-----
 meta/classes/image_types.bbclass                |  113 --
 meta/classes/license.bbclass                    |   16 +-
 meta/classes/package_deb.bbclass                |  151 +--
 meta/classes/package_ipk.bbclass                |  202 +---
 meta/classes/package_rpm.bbclass                |  472 --------
 meta/classes/populate_sdk_base.bbclass          |   63 +-
 meta/classes/populate_sdk_deb.bbclass           |   59 -
 meta/classes/populate_sdk_ipk.bbclass           |   54 -
 meta/classes/populate_sdk_rpm.bbclass           |  152 ---
 meta/classes/rootfs_deb.bbclass                 |  115 --
 meta/classes/rootfs_ipk.bbclass                 |  138 +--
 meta/classes/rootfs_rpm.bbclass                 |  184 ---
 meta/lib/oe/image.py                            |  239 ++++
 meta/lib/oe/manifest.py                         |  291 +++++
 meta/lib/oe/package_manager.py                  | 1374 +++++++++++++++++++++++
 meta/lib/oe/rootfs.py                           |  681 +++++++++++
 meta/lib/oe/sdk.py                              |  345 ++++++
 meta/lib/oe/utils.py                            |   12 +-
 scripts/postinst-intercepts/update_font_cache   |    2 +-
 scripts/postinst-intercepts/update_pixbuf_cache |    2 +-
 21 files changed, 3016 insertions(+), 1978 deletions(-)
 create mode 100644 meta/lib/oe/image.py
 create mode 100644 meta/lib/oe/manifest.py
 create mode 100644 meta/lib/oe/package_manager.py
 create mode 100644 meta/lib/oe/rootfs.py
 create mode 100644 meta/lib/oe/sdk.py
Signature · 1 line
1.7.9.5
#15 lore raw

v5 cover Rootfs/image generation refactoring (cover letter only)

In reply to Laurentiu Palcu

V5:
* dump command output in case errors occur;

V4:
* fix multilib build issue for RPM backend;

V3:
* add simple check to just return if we're attempting to install packages and the list is empty;

V2:
* fix building from feeds for opkg;
* rebase;

Hi all,

First off: this large patchset adds no change in the rootfs/image creation functionality. The main logic is supposed to be the same as before. Also, I decided not to spam the list with this large patchset (49 patches) and I sent only the cover-letter. Those who want to take a peak at the code, can have a look by clicking the link below.

If people would like the patches sent to the list too, just say so.

Ok, what's it all about then? Here are the main changes:
* all the old bash shell code (more then 90% of it anyway) has been ported to Python. This would, hopefully, make the code more readable and allows us to use some of the Python powerful features. The following new files were born, together with a fair amount of changes in some bbclass'es:

Quoted 1 line

meta/lib/oe/manifest.py - implements the initial manifest creation (for now).

This is a file containing the list of packages going into the final image. In theory, we should be able to use this file later to re-generate the rootfs from a package feed, outside bitbake environment;

> meta/lib/oe/package_manager.py - implements the basic package management
API: install/remove packages, update index DB/index file creation. This is mainly used by Rootfs/Sdk classes in order to generate the rootfs;

> meta/lib/oe/rootfs.py - contains code for rootfs generation;

> meta/lib/oe/image.py - the image creation part;

> meta/lib/oe/sdk.py - populate the SDK target/host rootfs.

With the new code, the entire do_rootfs routine in image.bbclass has now just 3 function calls: create_manifest(), create_rootfs(), create_image(). In this order. Easier to debug just a certain part of the rootfs/image creation process.

* Some performance improvement has been obtained in 2 areas: index file creation and image generation. These operations were serial in the old code. Now, they're done in parallel.

* People complained about intercept scripts being hard to debug. That was because the old code used a log checking routine that scanned the logs for some standart error strings which were not necessarily errors. Hence, the intercepts had their stderr redirected to /dev/null. This was now removed since we can easily handle intercepts errors in python. So, errors will go to the log file.

That's about it. There is room for even further improvement, in the index creation part. I had some code in place for that but I had to remove it, temporarily, due to some synchronization issues. Hopefully, I'll find the issue and include that piece back.

The code was tested on my machine and on a local AB for x86, x86-64, arm, ppc, mips and build appliance. The builds and sanity tests finished successfully.

laurentiu

The following changes since commit 4e9eb77108c7e628ebd00ec848b8bc034802e197:

sstate: Improve funciton checksums (2014-02-04 22:51:43 +0000)

are available in the git repository at:

git://mirror.rb.intel.com/git.yoctoproject.org/poky-contrib lpalcu/rootfs_refactoring_ship_oecore

for you to fetch changes up to 20104ecbb94a1ada0cb3a26c7801b56a897dc900:

image.py, package_manager.py, rootfs.py: dump command output on error (2014-02-10 14:06:08 +0200)

----------------------------------------------------------------
Hongxu Jia (18):
lib/oe/manifest.py: add rpm image manifest creation
lib/oe/package_manager.py: support RpmPM
lib/oe/rootfs.py: support RpmRootfs
lib/oe/rootfs.py: Tweak the rootfs removing operation
rootfs.py: fix uninstall uneeded pkgs failed
rootfs.py: strip kernel-abiversion useless readline
lib/oe/image.py: fix get rootfs_extra_space failed image.bbclass/license.bbclass: ajustment list_installed_packages invoking license.bbclass: fix license_create_manifest failed
lib/oe/sdk.py: support RpmRootfs
image.bbclass/populate_sdk_base.bbclass: shift position of sdk complementary install definition Cleanup rootfs_rpm,package_rpm bbclass files
lib/oe/rootfs.py: fix invoking rpm _handle_intercept_failure failed lib/oe/package_manager.py: fix invoking rpm save_rpmpostinist failed lib/oe/rootfs.py: fix invoking _run_intercepts failed
populate_sdk_rpm.bbclass: remove old shell code
package_manger.py/rootfs.py: rename save_rpmpostinist with save_rpmpostinst lib/oe/package_manager.py: moving global SCRIPTLET_FORMAT and DB_CONFIG_CONTENT to RpmPM

Laurentiu Palcu (35):
lib/oe/utils.py: add pre/post process helper function lib/oe/image.py: add new image creation library lib/oe/manifest.py: add library for image manifest creation lib/oe/package_manager.py: add new package management library lib/oe/rootfs.py: add new library for rootfs creation
Activate the new python rootfs/image creation routines oe/manifest.py: Add manifest creation for opkg package_(deb|ipk).bbclass: remove the stamp when creating package from cache lib/oe/manifest.py: create global variables for package types lib/oe/package_manager.py: add deploy dir locking mechanism lib/oe/package_manager.py: use the bitbake APT_ARGS variable lib/oe/package_manager.py: add support for opkg backend lib/oe/rootfs.py: add support for opkg backend
Cleanup image,rootfs_ipk,package_ipk bbclass files
image.bbclass, lib/oe/rootfs.py: remove intercept_scripts directory lib/oe/manifest.py: create manifests for SDK too lib/oe/rootfs.py: use Manifest.INSTALL_ORDER lib/oe/package_manager.py: fixes for dpkg backend
lib/oe/sdk.py: add SDK class
populate_sdk_base.bbclass: activate the new python routines image.bbclass: change POPULATE_SDK_POST_TARGET_COMMAND populate_sdk_(deb|ipk).bbclass: remove old shell code lib/oe/package_manager.py: RpmPM fixes
lib/oe/rootfs.py: warn the user if intercept hooks fail scripts/postinst-intercepts: do not redirect errors to /dev/null lib/oe/package_manager.py: DpkgPM, use lock on deploy dir lib/oe/image.py: fix image size calculation routine lib/oe/package_manager.py: OpkgPM/DpkgPM fixes
lib/oe/rootfs.py: OpkgRootfs, fix issue in _get_delayed_postinsts() lib/oe/package_manager.py: do not use stamps lib/oe/package_manager.py: OpkgPM, bad recommendation handling change rootfs.py, package_manager.py, sdk.py: Fix building from feeds feature for opkg lib/oe/package_manager.py: check that package list is not empty lib/oe/package_manager.py: RpmPM: fix issue with multilib builds image.py, package_manager.py, rootfs.py: dump command output on error

 meta/classes/image.bbclass                      |  329 +-----
 meta/classes/image_types.bbclass                |  113 --
 meta/classes/license.bbclass                    |   16 +-
 meta/classes/package_deb.bbclass                |  151 +--
 meta/classes/package_ipk.bbclass                |  202 +---
 meta/classes/package_rpm.bbclass                |  472 --------
 meta/classes/populate_sdk_base.bbclass          |   63 +-
 meta/classes/populate_sdk_deb.bbclass           |   59 -
 meta/classes/populate_sdk_ipk.bbclass           |   54 -
 meta/classes/populate_sdk_rpm.bbclass           |  152 ---
 meta/classes/rootfs_deb.bbclass                 |  115 --
 meta/classes/rootfs_ipk.bbclass                 |  138 +--
 meta/classes/rootfs_rpm.bbclass                 |  184 ---
 meta/lib/oe/image.py                            |  239 ++++
 meta/lib/oe/manifest.py                         |  291 +++++
 meta/lib/oe/package_manager.py                  | 1375 +++++++++++++++++++++++
 meta/lib/oe/rootfs.py                           |  681 +++++++++++
 meta/lib/oe/sdk.py                              |  345 ++++++
 meta/lib/oe/utils.py                            |   12 +-
 scripts/postinst-intercepts/update_font_cache   |    2 +-
 scripts/postinst-intercepts/update_pixbuf_cache |    2 +-
 21 files changed, 3017 insertions(+), 1978 deletions(-)
 create mode 100644 meta/lib/oe/image.py
 create mode 100644 meta/lib/oe/manifest.py
 create mode 100644 meta/lib/oe/package_manager.py
 create mode 100644 meta/lib/oe/rootfs.py
 create mode 100644 meta/lib/oe/sdk.py

Hongxu Jia (18):
lib/oe/manifest.py: add rpm image manifest creation lib/oe/package_manager.py: support RpmPM lib/oe/rootfs.py: support RpmRootfs
lib/oe/rootfs.py: Tweak the rootfs removing operation rootfs.py: fix uninstall uneeded pkgs failed
rootfs.py: strip kernel-abiversion useless readline lib/oe/image.py: fix get rootfs_extra_space failed image.bbclass/license.bbclass: ajustment list_installed_packages
invoking
license.bbclass: fix license_create_manifest failed lib/oe/sdk.py: support RpmRootfs image.bbclass/populate_sdk_base.bbclass: shift position of sdk
complementary install definition
Cleanup rootfs_rpm,package_rpm bbclass files lib/oe/rootfs.py: fix invoking rpm _handle_intercept_failure failed lib/oe/package_manager.py: fix invoking rpm save_rpmpostinist failed lib/oe/rootfs.py: fix invoking _run_intercepts failed populate_sdk_rpm.bbclass: remove old shell code package_manger.py/rootfs.py: rename save_rpmpostinist with
save_rpmpostinst
lib/oe/package_manager.py: moving global SCRIPTLET_FORMAT and
DB_CONFIG_CONTENT to RpmPM

Laurentiu Palcu (35):
lib/oe/utils.py: add pre/post process helper function lib/oe/image.py: add new image creation library lib/oe/manifest.py: add library for image manifest creation lib/oe/package_manager.py: add new package management library lib/oe/rootfs.py: add new library for rootfs creation Activate the new python rootfs/image creation routines oe/manifest.py: Add manifest creation for opkg package_(deb|ipk).bbclass: remove the stamp when creating package
from cache
lib/oe/manifest.py: create global variables for package types lib/oe/package_manager.py: add deploy dir locking mechanism lib/oe/package_manager.py: use the bitbake APT_ARGS variable lib/oe/package_manager.py: add support for opkg backend lib/oe/rootfs.py: add support for opkg backend
Cleanup image,rootfs_ipk,package_ipk bbclass files image.bbclass, lib/oe/rootfs.py: remove intercept_scripts directory lib/oe/manifest.py: create manifests for SDK too lib/oe/rootfs.py: use Manifest.INSTALL_ORDER lib/oe/package_manager.py: fixes for dpkg backend lib/oe/sdk.py: add SDK class
populate_sdk_base.bbclass: activate the new python routines image.bbclass: change POPULATE_SDK_POST_TARGET_COMMAND populate_sdk_(deb|ipk).bbclass: remove old shell code lib/oe/package_manager.py: RpmPM fixes
lib/oe/rootfs.py: warn the user if intercept hooks fail scripts/postinst-intercepts: do not redirect errors to /dev/null lib/oe/package_manager.py: DpkgPM, use lock on deploy dir lib/oe/image.py: fix image size calculation routine lib/oe/package_manager.py: OpkgPM/DpkgPM fixes lib/oe/rootfs.py: OpkgRootfs, fix issue in _get_delayed_postinsts() lib/oe/package_manager.py: do not use stamps lib/oe/package_manager.py: OpkgPM, bad recommendation handling change rootfs.py, package_manager.py, sdk.py: Fix building from feeds
feature for opkg
lib/oe/package_manager.py: check that package list is not empty lib/oe/package_manager.py: RpmPM: fix issue with multilib builds image.py, package_manager.py, rootfs.py: dump command output on error

 meta/classes/image.bbclass                      |  329 +-----
 meta/classes/image_types.bbclass                |  113 --
 meta/classes/license.bbclass                    |   16 +-
 meta/classes/package_deb.bbclass                |  151 +--
 meta/classes/package_ipk.bbclass                |  202 +---
 meta/classes/package_rpm.bbclass                |  472 --------
 meta/classes/populate_sdk_base.bbclass          |   63 +-
 meta/classes/populate_sdk_deb.bbclass           |   59 -
 meta/classes/populate_sdk_ipk.bbclass           |   54 -
 meta/classes/populate_sdk_rpm.bbclass           |  152 ---
 meta/classes/rootfs_deb.bbclass                 |  115 --
 meta/classes/rootfs_ipk.bbclass                 |  138 +--
 meta/classes/rootfs_rpm.bbclass                 |  184 ---
 meta/lib/oe/image.py                            |  239 ++++
 meta/lib/oe/manifest.py                         |  291 +++++
 meta/lib/oe/package_manager.py                  | 1375 +++++++++++++++++++++++
 meta/lib/oe/rootfs.py                           |  681 +++++++++++
 meta/lib/oe/sdk.py                              |  345 ++++++
 meta/lib/oe/utils.py                            |   12 +-
 scripts/postinst-intercepts/update_font_cache   |    2 +-
 scripts/postinst-intercepts/update_pixbuf_cache |    2 +-
 21 files changed, 3017 insertions(+), 1978 deletions(-)
 create mode 100644 meta/lib/oe/image.py
 create mode 100644 meta/lib/oe/manifest.py
 create mode 100644 meta/lib/oe/package_manager.py
 create mode 100644 meta/lib/oe/rootfs.py
 create mode 100644 meta/lib/oe/sdk.py
Signature · 1 line
1.7.9.5
#16 lore raw
Quoted 6 lines · Laurentiu Palcu

V5:
* dump command output in case errors occur;

V4:
* fix multilib build issue for RPM backend;

Quoted 8 lines

V3:
* add simple check to just return if we're attempting to install packages and

    the list is empty;

V2:
* fix building from feeds for opkg;
* rebase;

When stubbing license manifest creation for the FEEDS functionality:

meta/classes/license.bbclass +6 -0
index c668783..a0413b9 100644
@@ -26,6 +26,12 @@ python write_package_manifest() {
 }
 
 license_create_manifest() {
+        # Test if BUILD_IMAGES_FROM_FEEDS is defined in env
+       echo ${BUILD_IMAGES_FROM_FEEDS}
+       if [ -n "${BUILD_IMAGES_FROM_FEEDS}" ]; then
+          exit 0
+       fi
+
 
 

I get this error message on v5.

Br,
David

$ bitbake -c rootfs core-image-minimal
Parsing recipes: 100% |######################################################################################################################################################################| Time: 00:00:12
Parsing of 852 .bb files complete (0 cached, 852 parsed). 1212 targets, 56 skipped, 0 masked, 0 errors.
NOTE: Resolving any missing task queue dependencies

Build Configuration:

BB_VERSION        = "1.21.1"
BUILD_SYS         = "x86_64-linux"
NATIVELSBSTRING   = "Ubuntu-13.10"
TARGET_SYS        = "powerpc-poky-linux"
MACHINE           = "qemuppc"
DISTRO            = "poky"
DISTRO_VERSION    = "1.5+snapshot-20140211"
TUNE_FEATURES     = "m32 fpu-hard ppc7400 altivec"
TARGET_FPU        = ""

meta
meta-yocto
meta-yocto-bsp = "(detachedfromFETCH_HEAD):20104ecbb94a1ada0cb3a26c7801b56a897dc900"

NOTE: Preparing runqueue
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks

ERROR: Error executing a python function in /media/sdb5/poky-contrib/meta/recipes-core/images/core-image-minimal.bb:

The stack trace of python calls that resulted in this exception/failure was:
File: 'do_rootfs', lineno: 17, function: <module>

     0013:    # generate final images
     0014:    create_image(d)
     0015:
     0016:
 *** 0017:do_rootfs(d)
     0018:

File: 'do_rootfs', lineno: 14, function: do_rootfs
0010: # generate rootfs
0011: create_rootfs(d)
0012:
0013: # generate final images
*** 0014: create_image(d)

     0015:
     0016:
     0017:do_rootfs(d)
     0018:
File: '/media/sdb5/poky-contrib/meta/lib/oe/image.py', lineno: 231, function: create_image
     0227:        execute_pre_post_process(self.d, post_process_cmds)
     0228:
     0229:
     0230:def create_image(d):
 *** 0231:    Image(d).create()
     0232:
     0233:if __name__ == "__main__":
     0234:    """
     0235:    Image creation can be called independent from bitbake 
environment.
File: '/media/sdb5/poky-contrib/meta/lib/oe/image.py', lineno: 210, function: create
     0206:        execute_pre_post_process(self.d, pre_process_cmds)
     0207:
     0208:        self._remove_old_symlinks()
     0209:

*** 0210: image_cmds = self._get_imagecmds()
0211:
0212: # create the images in parallel
0213: nproc = multiprocessing.cpu_count()
0214: pool = bb.utils.multiprocessingpool(nproc)
File: '/media/sdb5/poky-contrib/meta/lib/oe/image.py', lineno: 195, function: _get_imagecmds
0191: cmds.append(localdata.expand("\trm
${IMAGE_NAME}.rootfs.${type}"))

     0192:            else:
     0193:                subimages.append(type)
     0194:

*** 0195: script_name = self._write_script(type, cmds)
0196:
0197: image_cmds.append((type, subimages, script_name))
0198:
0199: return image_cmds
File: '/media/sdb5/poky-contrib/meta/lib/oe/image.py', lineno: 158, function: _write_script

     0154:        self.d.setVarFlag('img_creation_func', 'func', 1)
     0155:        self.d.setVarFlag('img_creation_func', 'fakeroot', 1)
     0156:
     0157:        with open(script_name, "w+") as script:

*** 0158: script.write("%s" % bb.build.shell_trap_code())
0159: script.write("export ROOTFS_SIZE=%d\n" %
self._get_rootfs_size())
0160: bb.data.emit_func('img_creation_func', script,
self.d)

     0161:            script.write("img_creation_func\n")
     0162:

Exception: AttributeError: 'module' object has no attribute 'shell_trap_code'

ERROR: Function failed: do_rootfs
ERROR: Logfile of failure stored in: /media/sdb5/bld/tmp/work/qemuppc-poky-linux/core-image-minimal/1.0-r0/temp/log.do_rootfs.9994
ERROR: Task 6 (/media/sdb5/poky-contrib/meta/recipes-core/images/core-image-minimal.bb, do_rootfs) failed with exit code '1'

#17 lore raw

Hi David,

Quoted 11 lines · David Nyström

File: '/media/sdb5/poky-contrib/meta/lib/oe/image.py', lineno: 158,
function: _write_script

     0154:        self.d.setVarFlag('img_creation_func', 'func', 1)
     0155:        self.d.setVarFlag('img_creation_func', 'fakeroot', 1)
     0156:
     0157:        with open(script_name, "w+") as script:

*** 0158: script.write("%s" % bb.build.shell_trap_code())
0159: script.write("export ROOTFS_SIZE=%d\n" %
self._get_rootfs_size())
0160: bb.data.emit_func('img_creation_func', script,
self.d)

Quoted 4 lines
     0161:            script.write("img_creation_func\n")
     0162:

Exception: AttributeError: 'module' object has no attribute 'shell_trap_code'

I guess you're missing this commit:

bitbake: build.py: create separate function for shell trap creation code

which is already in master.

laurentiu

Quoted 8 lines

ERROR: Function failed: do_rootfs
ERROR: Logfile of failure stored in: /media/sdb5/bld/tmp/work/qemuppc-poky-linux/core-image-minimal/1.0-r0/temp/log.do_rootfs.9994
ERROR: Task 6 (/media/sdb5/poky-contrib/meta/recipes-core/images/core-image-minimal.bb,
do_rootfs) failed with exit code '1'

#18 lore raw
Quoted 18 lines · Laurentiu Palcu

Hi David,

Quoted 11 lines · David Nyström

File: '/media/sdb5/poky-contrib/meta/lib/oe/image.py', lineno: 158,
function: _write_script

      0154:        self.d.setVarFlag('img_creation_func', 'func', 1)
      0155:        self.d.setVarFlag('img_creation_func', 'fakeroot', 1)
      0156:
      0157:        with open(script_name, "w+") as script:

*** 0158: script.write("%s" % bb.build.shell_trap_code())
0159: script.write("export ROOTFS_SIZE=%d\n" %
self._get_rootfs_size())
0160: bb.data.emit_func('img_creation_func', script,
self.d)

Quoted 4 lines
      0161:            script.write("img_creation_func\n")
      0162:

Exception: AttributeError: 'module' object has no attribute 'shell_trap_code'

Quoted 5 lines

I guess you're missing this commit:

bitbake: build.py: create separate function for shell trap creation code

which is already in master.

Thanks,

David

Quoted 16 lines

laurentiu

Quoted 8 lines

ERROR: Function failed: do_rootfs
ERROR: Logfile of failure stored in: /media/sdb5/bld/tmp/work/qemuppc-poky-linux/core-image-minimal/1.0-r0/temp/log.do_rootfs.9994
ERROR: Task 6 (/media/sdb5/poky-contrib/meta/recipes-core/images/core-image-minimal.bb,
do_rootfs) failed with exit code '1'

_______________________________________________
Openembedded-core mailing list
[email protected]
http://lists.openembedded.org/mailman/listinfo/openembedded-core

Tested-by
#19 lore raw
Quoted 21 lines · David Nyström
Quoted 20 lines · Laurentiu Palcu

Hi David,

Quoted 11 lines · David Nyström

File: '/media/sdb5/poky-contrib/meta/lib/oe/image.py', lineno: 158,
function: _write_script

      0154:        self.d.setVarFlag('img_creation_func', 'func', 1)
      0155:        self.d.setVarFlag('img_creation_func', 'fakeroot', 1)
      0156:
      0157:        with open(script_name, "w+") as script:

*** 0158: script.write("%s" % bb.build.shell_trap_code())
0159: script.write("export ROOTFS_SIZE=%d\n" %
self._get_rootfs_size())
0160: bb.data.emit_func('img_creation_func', script,
self.d)

Quoted 4 lines
      0161:            script.write("img_creation_func\n")
      0162:

Exception: AttributeError: 'module' object has no attribute 'shell_trap_code'

I guess you're missing this commit:

Quoted 7 lines
Quoted 3 lines

bitbake: build.py: create separate function for shell trap creation code

which is already in master.

Thanks,

David

With the manifest stub patch I sent and v5, FEEDS functionality for IPK is verified working again.

Only below is generated when building from FEEDS:

$ cat tmp/deploy/images/qemuppc/core-image-minimal-qemuppc.manifest
busybox-syslog ppc7400 1.21.1-r0
libc6 ppc7400 2.18-r0
busybox ppc7400 1.21.1-r0
busybox-udhcpc ppc7400 1.21.1-r0
modutils-initscripts ppc7400 1.0-r6
libuuid1 ppc7400 2.23.2-r0
base-files qemuppc 3.0.14-r73
sysvinit-inittab qemuppc 2.88dsf-r9
initscripts ppc7400 1.0-r141
update-alternatives-cworth ppc7400 1:0.1.8+svnr653-r13.0
libblkid1 ppc7400 2.23.2-r0
udev-utils ppc7400 182-r7
libkmod2 ppc7400 14+git0+3b38c7fcb5-r0
base-passwd ppc7400 3.5.26-r2
busybox-hwclock ppc7400 1.21.1-r0
packagegroup-core-boot qemuppc 1.0-r11
udev ppc7400 182-r7
sysvinit-pidof ppc7400 2.88dsf-r11
update-rc.d all 0.7-r5
netbase ppc7400 1:5.1-r0
udev-cache ppc7400 182-r7
run-postinsts ppc7400 1.0-r9
init-ifupdown qemuppc 1.0-r3
sysvinit ppc7400 2.88dsf-r11

Br,
David

Quoted 21 lines
Quoted 20 lines

laurentiu

Quoted 12 lines

ERROR: Function failed: do_rootfs
ERROR: Logfile of failure stored in:
/media/sdb5/bld/tmp/work/qemuppc-poky-linux/core-image-minimal/1.0-r0/temp/log.do_rootfs.9994

ERROR: Task 6 (/media/sdb5/poky-contrib/meta/recipes-core/images/core-image-minimal.bb,

do_rootfs) failed with exit code '1'

_______________________________________________
Openembedded-core mailing list
[email protected]
http://lists.openembedded.org/mailman/listinfo/openembedded-core

#20 lore raw
In reply to Laurentiu Palcu
Quoted 3 lines · Laurentiu Palcu

V5:
* dump command output in case errors occur;

rm -fr tmp/deploy/qemuppc/images/*
bitbake -c cleanall core-image-minimal; bitbake core-image-minimal

Above does not seem to regenerate the image ?

Br,
David

#21 lore raw
Quoted 9 lines · David Nyström
Quoted 3 lines · Laurentiu Palcu

V5:
* dump command output in case errors occur;

rm -fr tmp/deploy/qemuppc/images/*
bitbake -c cleanall core-image-minimal; bitbake core-image-minimal

Above does not seem to regenerate the image ?

Sorry, Ignore this.
My mistake.

Quoted 6 lines

Br,
David
_______________________________________________
Openembedded-core mailing list
[email protected]
http://lists.openembedded.org/mailman/listinfo/openembedded-core