Skip to contentSkip to conversation

rpi: bumps, and support for rpi2 (branch yem/rpi-bumps)

PATCH New Yann E. MORIN 4 participants 7 messages Feb 22, 2015 – Feb 23, 2015 Broadcom BCM2711/BCM2835 Arm architecture

lore
Share & tools
lore
#0 lore raw

cover rpi: bumps, and support for rpi2 (branch yem/rpi-bumps)

Hello All!

This series bumps the RPi packages, and adds support for the Raspberry Pi 2.

Thanks to James and Guillermo for independently providing similar patchsets to add support for the RPi-2. :-)

Regards,
Yann E. MORIN.

The following changes since commit 7b46d551e6b7f62f1cd0483357a68b90107c509a:

weston: add patch to fix uClibc build caused CLOCK_BOOTTIME (2015-02-22 12:45:26 +0100)

are available in the git repository at:

git://git.busybox.net/~ymorin/git/buildroot yem/rpi-bumps

for you to fetch changes up to ce51aa53f9f02f95284eb78edef084896dbc94bb:

configs: add Raspberry Pi 2 defconfig (2015-02-22 21:08:40 +0100)

----------------------------------------------------------------
James Hebden (2):
package/rpi-firmware: bump version
configs: add Raspberry Pi 2 defconfig

Yann E. MORIN (1):
package/rpi-userland: bump version

 configs/raspberrypi2_defconfig                     |  15 +++
 package/rpi-firmware/rpi-firmware.mk               |   9 +-
 ...s-for-the-OpenGLESv2-EGL-and-bcm_host-li.patch} | 108 ++++++++++++--------
 ...make-vmcs.cmake-allow-to-override-VMCS_IN.patch |   7 +-
 ...emove-faulty-assert-to-make-weston-happy-.patch |  33 ++++++
 .../rpi-userland/0003-remove-faulty-assert.patch   |  21 ----
 package/rpi-userland/0004-fix-musl-compile.patch   | 113 ---------------------
 package/rpi-userland/rpi-userland.mk               |   2 +-
 8 files changed, 119 insertions(+), 189 deletions(-)
 create mode 100644 configs/raspberrypi2_defconfig
 rename package/rpi-userland/{0001-add-pkgconfig-files.patch => 0001-Add-.pc-files-for-the-OpenGLESv2-EGL-and-bcm_host-li.patch} (60%)
 create mode 100644 package/rpi-userland/0003-interface-remove-faulty-assert-to-make-weston-happy-.patch
 delete mode 100644 package/rpi-userland/0003-remove-faulty-assert.patch
 delete mode 100644 package/rpi-userland/0004-fix-musl-compile.patch
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'
#1 lore raw

PATCH 1/3 package/rpi-userland: bump version

Misc fixes and enhancements for: vsync; building with musl; clocks; memory compaction...

Drop musl patches: applied upstream, yeah! :-)

Rename remaining patches, refresh on top latest master, and use git-format to re-generate the patches.

---
 ...s-for-the-OpenGLESv2-EGL-and-bcm_host-li.patch} | 108 ++++++++++++--------
 ...make-vmcs.cmake-allow-to-override-VMCS_IN.patch |   7 +-
 ...emove-faulty-assert-to-make-weston-happy-.patch |  33 ++++++
 .../rpi-userland/0003-remove-faulty-assert.patch   |  21 ----
 package/rpi-userland/0004-fix-musl-compile.patch   | 113 ---------------------
 package/rpi-userland/rpi-userland.mk               |   2 +-
 6 files changed, 102 insertions(+), 182 deletions(-)
 rename package/rpi-userland/{0001-add-pkgconfig-files.patch => 0001-Add-.pc-files-for-the-OpenGLESv2-EGL-and-bcm_host-li.patch} (60%)
 create mode 100644 package/rpi-userland/0003-interface-remove-faulty-assert-to-make-weston-happy-.patch
 delete mode 100644 package/rpi-userland/0003-remove-faulty-assert.patch
 delete mode 100644 package/rpi-userland/0004-fix-musl-compile.patch
package/rpi-userland/0001-Add-.pc-files-for-the-OpenGLESv2-EGL-and-bcm_host-li.patch renamed from package/rpi-userland/0001-add-pkgconfig-files.patch +64 -44
similarity index 60%
rename from package/rpi-userland/0001-add-pkgconfig-files.patch
rename to package/rpi-userland/0001-Add-.pc-files-for-the-OpenGLESv2-EGL-and-bcm_host-li.patch
index e88f810..352f95d 100644
@@ -1,32 +1,58 @@
-Add .pc files for the OpenGLESv2, EGL and bcm_host libraries
+From 853d7486a98e38eb78d48b2dcb1dda36610575b4 Mon Sep 17 00:00:00 2001
+From: "Yann E. MORIN" <[email protected]>
+Date: Sat, 24 Jan 2015 19:44:14 +0100
+Subject: [PATCH] Add .pc files for the OpenGLESv2, EGL and bcm_host
+ libraries
 
 Those pkg-config files make it easier for Qt5 to find those libraries
 and the appropriate link flags.
 
 Signed-off-by: Thomas Petazzoni <[email protected]>
 Signed-off-by: "Yann E. MORIN" <[email protected]>
+---
+ host_applications/linux/libs/bcm_host/CMakeLists.txt |  4 ++++
+ host_applications/linux/libs/bcm_host/bcm_host.pc.in | 10 ++++++++++
+ interface/khronos/CMakeLists.txt                     |  8 ++++++++
+ interface/khronos/egl/egl.pc.in                      | 11 +++++++++++
+ interface/khronos/glxx/glesv2.pc.in                  | 10 ++++++++++
+ 5 files changed, 43 insertions(+)
+ create mode 100644 host_applications/linux/libs/bcm_host/bcm_host.pc.in
+ create mode 100644 interface/khronos/egl/egl.pc.in
+ create mode 100644 interface/khronos/glxx/glesv2.pc.in
 
-Index: b/interface/khronos/egl/egl.pc.in
-===================================================================
+diff --git a/host_applications/linux/libs/bcm_host/CMakeLists.txt b/host_applications/linux/libs/bcm_host/CMakeLists.txt
+index 1edf50a..1f29ead 100644
+--- a/host_applications/linux/libs/bcm_host/CMakeLists.txt
++++ b/host_applications/linux/libs/bcm_host/CMakeLists.txt
+@@ -20,3 +20,7 @@ target_link_libraries(bcm_host vcos vchostif)
+ 
+ install(TARGETS bcm_host DESTINATION lib)
+ 
++configure_file("${CMAKE_CURRENT_SOURCE_DIR}/bcm_host.pc.in"
++  "${CMAKE_CURRENT_BINARY_DIR}/bcm_host.pc" @ONLY)
++install(FILES "${CMAKE_CURRENT_BINARY_DIR}/bcm_host.pc"
++  DESTINATION "${CMAKE_INSTALL_PREFIX}/lib/pkgconfig")
+diff --git a/host_applications/linux/libs/bcm_host/bcm_host.pc.in b/host_applications/linux/libs/bcm_host/bcm_host.pc.in
+new file mode 100644
+index 0000000..d40d350
 --- /dev/null
-+++ b/interface/khronos/egl/egl.pc.in
-@@ -0,0 +1,11 @@
-+prefix=@CMAKE_INSTALL_PREFIX@
++++ b/host_applications/linux/libs/bcm_host/bcm_host.pc.in
+@@ -0,0 +1,10 @@
++prefix=/usr
 +exec_prefix=${prefix}
 +libdir=${exec_prefix}/lib
 +includedir=${prefix}/include
 +
-+Name: egl
-+Description: RasberryPi implementation of EGL
-+Version: 10
-+Libs: -L${libdir} -lEGL -lGLESv2 -lbcm_host -lvchostif
-+Cflags: -I${includedir}/ -I${includedir}/interface/vcos/pthreads/ \
-+        -I${includedir}/interface/vmcs_host/linux/
-Index: b/interface/khronos/CMakeLists.txt
-===================================================================
++Name: bcm_host
++Description: Broadcom VideoCore host API library
++Version: 1
++Libs: -L${libdir} -lbcm_host -lvcos -lvchiq_arm
++Cflags: -I${includedir} -I${includedir}/interface/vmcs_host/linux -I${includedir}/interface/vcos/pthreads -DUSE_VCHIQ_ARM
+diff --git a/interface/khronos/CMakeLists.txt b/interface/khronos/CMakeLists.txt
+index c437291..ec5a605 100644
 --- a/interface/khronos/CMakeLists.txt
 +++ b/interface/khronos/CMakeLists.txt
-@@ -74,3 +74,11 @@
+@@ -74,3 +74,11 @@ target_link_libraries(OpenVG EGL)
  
  install(TARGETS EGL GLESv2 OpenVG WFC khrn_client DESTINATION lib)
  install(TARGETS EGL_static GLESv2_static khrn_static DESTINATION lib)
@@ -38,8 +64,26 @@ Index: b/interface/khronos/CMakeLists.txt
 +  "${CMAKE_CURRENT_BINARY_DIR}/glxx/glesv2.pc" @ONLY)
 +install(FILES "${CMAKE_CURRENT_BINARY_DIR}/glxx/glesv2.pc"
 +  DESTINATION "${CMAKE_INSTALL_PREFIX}/lib/pkgconfig")
-Index: b/interface/khronos/glxx/glesv2.pc.in
-===================================================================
+diff --git a/interface/khronos/egl/egl.pc.in b/interface/khronos/egl/egl.pc.in
+new file mode 100644
+index 0000000..5868706
+--- /dev/null
++++ b/interface/khronos/egl/egl.pc.in
+@@ -0,0 +1,11 @@
++prefix=@CMAKE_INSTALL_PREFIX@
++exec_prefix=${prefix}
++libdir=${exec_prefix}/lib
++includedir=${prefix}/include
++
++Name: egl
++Description: RasberryPi implementation of EGL
++Version: 10
++Libs: -L${libdir} -lEGL -lGLESv2 -lbcm_host -lvchostif
++Cflags: -I${includedir}/ -I${includedir}/interface/vcos/pthreads/ \
++        -I${includedir}/interface/vmcs_host/linux/
+diff --git a/interface/khronos/glxx/glesv2.pc.in b/interface/khronos/glxx/glesv2.pc.in
+new file mode 100644
+index 0000000..2f58eed
 --- /dev/null
 +++ b/interface/khronos/glxx/glesv2.pc.in
 @@ -0,0 +1,10 @@
@@ -53,30 +97,6 @@ Index: b/interface/khronos/glxx/glesv2.pc.in
 +Version: 2.0
 +Libs: -L${libdir} -lGLESv2
 +Cflags: -I${includedir}/
-Index: b/host_applications/linux/libs/bcm_host/CMakeLists.txt
-===================================================================
---- a/host_applications/linux/libs/bcm_host/CMakeLists.txt
-+++ b/host_applications/linux/libs/bcm_host/CMakeLists.txt
-@@ -20,3 +20,7 @@
- 
- install(TARGETS bcm_host DESTINATION lib)
- 
-+configure_file("${CMAKE_CURRENT_SOURCE_DIR}/bcm_host.pc.in"
-+  "${CMAKE_CURRENT_BINARY_DIR}/bcm_host.pc" @ONLY)
-+install(FILES "${CMAKE_CURRENT_BINARY_DIR}/bcm_host.pc"
-+  DESTINATION "${CMAKE_INSTALL_PREFIX}/lib/pkgconfig")
-Index: b/host_applications/linux/libs/bcm_host/bcm_host.pc.in
-===================================================================
---- /dev/null
-+++ b/host_applications/linux/libs/bcm_host/bcm_host.pc.in
-@@ -0,0 +1,10 @@
-+prefix=/usr
-+exec_prefix=${prefix}
-+libdir=${exec_prefix}/lib
-+includedir=${prefix}/include
-+
-+Name: bcm_host
-+Description: Broadcom VideoCore host API library
-+Version: 1
-+Libs: -L${libdir} -lbcm_host -lvcos -lvchiq_arm
-+Cflags: -I${includedir} -I${includedir}/interface/vmcs_host/linux -I${includedir}/interface/vcos/pthreads -DUSE_VCHIQ_ARM
+-- 
+1.9.1
+
package/rpi-userland/0002-makefiles-cmake-vmcs.cmake-allow-to-override-VMCS_IN.patch +4 -3
index e54d29e..c218898 100644
@@ -1,6 +1,6 @@
-From fec2560cfcb8d3398e4f1ccc3de7923365873676 Mon Sep 17 00:00:00 2001
+From 8894136ff80a8c6eeadf1799af59aa3aa7b87827 Mon Sep 17 00:00:00 2001
 From: Samuel Martin <[email protected]>
-Date: Sat, 5 Jan 2013 16:04:55 +0100
+Date: Sat, 24 Jan 2015 19:44:50 +0100
 Subject: [PATCH] makefiles/cmake/vmcs.cmake: allow to override
  VMCS_INSTALL_PREFIX
 
@@ -23,4 +23,5 @@ index 0f8641b..cc70cca 100644
  endif()
  
 -- 
-1.8.1
+1.9.1
+
package/rpi-userland/0003-interface-remove-faulty-assert-to-make-weston-happy-.patch new file +33 -0
new file mode 100644
index 0000000..16a5f52
@@ -0,0 +1,33 @@
+From e0df1a4f1d9737935165f420d0d0f685efc63f49 Mon Sep 17 00:00:00 2001
+From: "Yann E. MORIN" <[email protected]>
+Date: Sat, 24 Jan 2015 22:07:19 +0100
+Subject: [PATCH] interface: remove faulty assert() to make weston happy at
+ runtime
+
+This was removed after a discussion on IRC with the weston guys
+('daniels' on irc.freenode.net/#wayland).
+
+Signed-off-by: "Yann E. MORIN" <[email protected]>
+
+---
+Upstream status: no, will be pushed by weston guys later.
+If not, I'll do it.
+---
+ interface/vmcs_host/vc_vchi_dispmanx.c | 1 -
+ 1 file changed, 1 deletion(-)
+
+diff --git a/interface/vmcs_host/vc_vchi_dispmanx.c b/interface/vmcs_host/vc_vchi_dispmanx.c
+index 85b373c..59a01f8 100755
+--- a/interface/vmcs_host/vc_vchi_dispmanx.c
++++ b/interface/vmcs_host/vc_vchi_dispmanx.c
+@@ -1296,7 +1296,6 @@ static void *dispmanx_notify_func( void *arg ) {
+          // Decrement the use count - the corresponding "use" is in vc_dispmanx_update_submit.
+          vchi_service_release(dispmanx_client.notify_handle[0]);
+          if (dispmanx_client.update_callback ) {
+-            vcos_assert( dispmanx_client.pending_update_handle == handle);
+             dispmanx_client.update_callback(handle, dispmanx_client.update_callback_param);
+          }
+       } else {
+-- 
+1.9.1
+
package/rpi-userland/0003-remove-faulty-assert.patch deleted +0 -21
deleted file mode 100644
index c23c43a..0000000
@@ -1,21 +0,0 @@
-interface: remove faulty assert() to make weston happy at runtime
-
-This was removed after a discussion on IRC with the weston guys
-('daniels' on irc.freenode.net/#wayland).
-
-Signed-off-by: "Yann E. MORIN" <[email protected]>
----
-Upstream status: no, will be pushed by weston guys later.
-If not, I'll do it.
-
-diff -durN rpi-userland-77d32cd.orig/interface/vmcs_host/vc_vchi_dispmanx.c rpi-userland-77d32cd/interface/vmcs_host/vc_vchi_dispmanx.c
---- rpi-userland-77d32cd.orig/interface/vmcs_host/vc_vchi_dispmanx.c	2013-10-04 17:43:44.000000000 +0200
-+++ rpi-userland-77d32cd/interface/vmcs_host/vc_vchi_dispmanx.c	2013-10-08 22:28:51.611433539 +0200
-@@ -1187,7 +1187,6 @@
-          continue;
-    
-       if(dispmanx_client.update_callback ) {
--         vcos_assert( dispmanx_client.pending_update_handle == (DISPMANX_UPDATE_HANDLE_T) dispmanx_client.notify_buffer[1]);
-          dispmanx_client.update_callback((DISPMANX_UPDATE_HANDLE_T) dispmanx_client.notify_buffer[1], dispmanx_client.update_callback_param);
-       }
-    }
package/rpi-userland/0004-fix-musl-compile.patch deleted +0 -113

113 lines not on this page · raw message

package/rpi-userland/rpi-userland.mk +1 -1
index 3f92950..20a6af0 100644
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-RPI_USERLAND_VERSION = ba753c1a7f68d7a2e00edaf03364eef001e233ef
+RPI_USERLAND_VERSION = 8f542a1647e6f88f254eadd9ad6929301c81913b
 RPI_USERLAND_SITE = $(call github,raspberrypi,userland,$(RPI_USERLAND_VERSION))
 RPI_USERLAND_LICENSE = BSD-3c
 RPI_USERLAND_LICENSE_FILES = LICENCE
Signature · 1 line
1.9.1
#2 lore raw

PATCH 2/3 package/rpi-firmware: bump version

In reply to Yann E. MORIN

From: James Hebden <[email protected]>

Misc fixes and improvements for: DT; hdmi and EDID; video decoding, latency and cropping; voltage calculations...

Also: support for RPi-2. :-)

Also remove the workaround previously required when installing DTBs, ad they are now in the same branch as the latest firmware.

[yann.morin.1998 at free.fr: further bump, fix and trim commit log]
---
 package/rpi-firmware/rpi-firmware.mk | 9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)
package/rpi-firmware/rpi-firmware.mk +2 -7
index 03178d5..1db1f0e 100644
@@ -4,27 +4,22 @@
 #
 ################################################################################
 
-RPI_FIRMWARE_VERSION = 393dcc0e76f18f6ac1b67ba45d36058410670034
+RPI_FIRMWARE_VERSION = 69b787b2cf9d1ba19bb018d74549699aeae075fb
 RPI_FIRMWARE_SITE = $(call github,raspberrypi,firmware,$(RPI_FIRMWARE_VERSION))
 RPI_FIRMWARE_LICENSE = BSD-3c
 RPI_FIRMWARE_LICENSE_FILES = boot/LICENCE.broadcom
 RPI_FIRMWARE_INSTALL_TARGET = NO
 RPI_FIRMWARE_INSTALL_IMAGES = YES
 
-ifeq ($(BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTBS),y)
 RPI_FIRMWARE_DEPENDENCIES += host-rpi-firmware
-# The Device Tree blobs are not yet in the master branch of the
-# raspberrypi firmware project, so we have to use a separate branch
-# for now.
-RPI_FIRMWARE_VERSION = 09627457b9e15bf4ea4e6751d3c173a3fb65df07
 define RPI_FIRMWARE_INSTALL_DTB
 	$(INSTALL) -D -m 0644 $(@D)/boot/bcm2708-rpi-b.dtb $(BINARIES_DIR)/rpi-firmware/bcm2708-rpi-b.dtb
 	$(INSTALL) -D -m 0644 $(@D)/boot/bcm2708-rpi-b-plus.dtb $(BINARIES_DIR)/rpi-firmware/bcm2708-rpi-b-plus.dtb
+	$(INSTALL) -D -m 0644 $(@D)/boot/bcm2709-rpi-2-b.dtb $(BINARIES_DIR)/rpi-firmware/bcm2709-rpi-2-b.dtb
 	for ovldtb in  $(@D)/boot/overlays/*.dtb; do \
 		$(INSTALL) -D -m 0644 $${ovldtb} $(BINARIES_DIR)/rpi-firmware/overlays/$${ovldtb##*/} || exit 1; \
 	done
 endef
-endif
 
 define RPI_FIRMWARE_INSTALL_IMAGES_CMDS
 	$(INSTALL) -D -m 0644 $(@D)/boot/bootcode.bin $(BINARIES_DIR)/rpi-firmware/bootcode.bin
Signature · 1 line
1.9.1
#3 lore raw

PATCH 3/3 configs: add Raspberry Pi 2 defconfig

In reply to Yann E. MORIN

From: James Hebden <[email protected]>

[yann.morin.1998 at free.fr: fix commit log; further bump]
Cc "Guillermo A. Amaral" <[email protected]>

---
Changes v3 -> v4:
- Further bumped, fix commit log (Yann)

Changes v2 -> v3
- Reformatted defonfig using make savedefconfig

Changes v1 -> v2
- Removed custom kernel configuration, used default kernel config for bcm2709
- Removed changes to rpi-firmware package, separate patch coming
- Enabled EABIhf

---
 configs/raspberrypi2_defconfig | 15 +++++++++++++++
 1 file changed, 15 insertions(+)
 create mode 100644 configs/raspberrypi2_defconfig
configs/raspberrypi2_defconfig new file +15 -0
new file mode 100644
index 0000000..d2f97fb
@@ -0,0 +1,15 @@
+BR2_arm=y
+BR2_cortex_a7=y
+BR2_ARM_EABIHF=y
+BR2_ARM_FPU_NEON_VFPV4=y
+BR2_TOOLCHAIN_BUILDROOT_LARGEFILE=y
+BR2_TOOLCHAIN_BUILDROOT_CXX=y
+BR2_TARGET_GENERIC_GETTY_PORT="tty1"
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux.git"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="3c9fd364bfa6c0f6ef725d74b72a9b77dd0d0fb4"
+BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
+BR2_LINUX_KERNEL_ZIMAGE=y
+BR2_PACKAGE_RPI_FIRMWARE=y
+BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTBS=y
Signature · 1 line
1.9.1
#4 lore raw

PATCH 3/3 configs: add Raspberry Pi 2 defconfig

Quoted 15 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Yann" == Yann E MORIN <[email protected]> writes:

From: James Hebden <[email protected]>

[yann.morin.1998 at free.fr: fix commit log; further bump]
Cc "Guillermo A. Amaral" <[email protected]>

---
Changes v3 -> v4:
- Further bumped, fix commit log (Yann)

Changes v2 -> v3
- Reformatted defonfig using make savedefconfig

Quoted 6 lines

Changes v1 -> v2
- Removed custom kernel configuration, used default kernel config for bcm2709
- Removed changes to rpi-firmware package, separate patch coming
- Enabled EABIhf

---
 configs/raspberrypi2_defconfig | 15 +++++++++++++++

It would be good to have a readme. If the boot sequence is the same as for rpi1 then a simple oneliner explaining to look at that readme would be enough.

Quoted 10 lines
 1 file changed, 15 insertions(+)
 create mode 100644 configs/raspberrypi2_defconfig
configs/raspberrypi2_defconfig new file +1 -0
new file mode 100644
index 0000000..d2f97fb
@@ -0,0 +1,15 @@
+BR2_arm=y

configs/raspberrypi2_defconfig line 11

Quoted 10 lines
configs/raspberrypi2_defconfig new file +10 -0
+BR2_cortex_a7=y
+BR2_ARM_EABIHF=y
+BR2_ARM_FPU_NEON_VFPV4=y
+BR2_TOOLCHAIN_BUILDROOT_LARGEFILE=y
+BR2_TOOLCHAIN_BUILDROOT_CXX=y
+BR2_TARGET_GENERIC_GETTY_PORT="tty1"
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux.git"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="3c9fd364bfa6c0f6ef725d74b72a9b77dd0d0fb4"

This is based on 3.19, so the kernel headers should be locked to that as well.

While we're at it, I see that the raspberrypi_dt defconfig also forgets to lock it.

Care to send a patch to fixup those issues?

Signature · 1 line
Bye, Peter Korsgaard
#5 lore raw

cover rpi: bumps, and support for rpi2 (branch yem/rpi-bumps)

In reply to Yann E. MORIN

Oh great! I'm just happy it's getting supported. :)

Quoted 65 lines · Yann E. MORIN

Hello All!

This series bumps the RPi packages, and adds support for the Raspberry Pi 2.

Thanks to James and Guillermo for independently providing similar patchsets to add support for the RPi-2. :-)

Regards,
Yann E. MORIN.

The following changes since commit
7b46d551e6b7f62f1cd0483357a68b90107c509a:

weston: add patch to fix uClibc build caused CLOCK_BOOTTIME (2015-02-22
12:45:26 +0100)

are available in the git repository at:

git://git.busybox.net/~ymorin/git/buildroot yem/rpi-bumps

for you to fetch changes up to ce51aa53f9f02f95284eb78edef084896dbc94bb:

configs: add Raspberry Pi 2 defconfig (2015-02-22 21:08:40 +0100)

----------------------------------------------------------------
James Hebden (2):
package/rpi-firmware: bump version
configs: add Raspberry Pi 2 defconfig

Yann E. MORIN (1):
package/rpi-userland: bump version

 configs/raspberrypi2_defconfig                     |  15 +++
 package/rpi-firmware/rpi-firmware.mk               |   9 +-
 ...s-for-the-OpenGLESv2-EGL-and-bcm_host-li.patch} | 108
++++++++++++--------
 ...make-vmcs.cmake-allow-to-override-VMCS_IN.patch |   7 +-
 ...emove-faulty-assert-to-make-weston-happy-.patch |  33 ++++++
 .../rpi-userland/0003-remove-faulty-assert.patch   |  21 ----
 package/rpi-userland/0004-fix-musl-compile.patch   | 113
---------------------
 package/rpi-userland/rpi-userland.mk               |   2 +-
 8 files changed, 119 insertions(+), 189 deletions(-)
 create mode 100644 configs/raspberrypi2_defconfig
 rename package/rpi-userland/{0001-add-pkgconfig-files.patch =>
0001-Add-.pc-files-for-the-OpenGLESv2-EGL-and-bcm_host-li.patch} (60%)
 create mode 100644
package/rpi-userland/0003-interface-remove-faulty-assert-to-make-weston-happy-.patch
 delete mode 100644 package/rpi-userland/0003-remove-faulty-assert.patch
 delete mode 100644 package/rpi-userland/0004-fix-musl-compile.patch

--

.-----------------.--------------------.------------------.--------------------.

|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics'
conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___
     |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is
no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v
 conspiracy.  |
Quoted 2 lines

'------------------------------^-------^------------------^--------------------'

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20150222/2107dabf/attachment.html>

#6 lore raw

cover rpi: bumps, and support for rpi2 (branch yem/rpi-bumps)

In reply to Yann E. MORIN

Dear Yann E. MORIN,

Quoted 6 lines · Yann E. MORIN

James Hebden (2):
package/rpi-firmware: bump version
configs: add Raspberry Pi 2 defconfig

Yann E. MORIN (1):
package/rpi-userland: bump version

Applied to next, thanks!

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com