Staging: panel: Fix checkpatch issues

index a7e3875..030a0cf 100644
@@ -71,7 +71,7 @@
 #define KEYPAD_BUFFER		64
 
 /* poll the keyboard this every second */
-#define INPUT_POLL_TIME		(HZ/50)
+#define INPUT_POLL_TIME		(HZ / 50)
 /* a key starts to repeat after this times INPUT_POLL_TIME */
 #define KEYPAD_REP_START	(10)
 /* a key repeats this times INPUT_POLL_TIME */

index 030a0cf..11a50f6 100644
@@ -576,7 +576,6 @@ static int keypad_enabled = NOT_SET;
 module_param(keypad_enabled, int, 0000);
 MODULE_PARM_DESC(keypad_enabled, "Deprecated option, use keypad_type instead");
 
-
 static const unsigned char *lcd_char_conv;
 
 /* for some LCD drivers (ks0074) we need a charset conversion table. */

index 11a50f6..66ad4d0 100644
@@ -825,7 +825,8 @@ static void lcd_write_cmd_s(int cmd)
 	lcd_send_serial(0x1F);	/* R/W=W, RS=0 */
 	lcd_send_serial(cmd & 0x0F);
 	lcd_send_serial((cmd >> 4) & 0x0F);
-	udelay(40);		/* the shortest command takes at least 40 us */
+	/* the shortest command takes at least 40 us */
+	usleep_range(40, 100);
 	spin_unlock_irq(&pprt_lock);
 }
 

@@ -836,7 +837,8 @@ static void lcd_write_data_s(int data)
 	lcd_send_serial(0x5F);	/* R/W=W, RS=1 */
 	lcd_send_serial(data & 0x0F);
 	lcd_send_serial((data >> 4) & 0x0F);
-	udelay(40);		/* the shortest data takes at least 40 us */
+	/* the shortest data takes at least 40 us */
+	usleep_range(40, 100);
 	spin_unlock_irq(&pprt_lock);
 }
 

@@ -846,19 +848,20 @@ static void lcd_write_cmd_p8(int cmd)
 	spin_lock_irq(&pprt_lock);
 	/* present the data to the data port */
 	w_dtr(pprt, cmd);
-	udelay(20);	/* maintain the data during 20 us before the strobe */
+	/* maintain the data during 20 us before the strobe */
+	usleep_range(20, 100);
 
 	bits.e = BIT_SET;
 	bits.rs = BIT_CLR;
 	bits.rw = BIT_CLR;
 	set_ctrl_bits();
 
-	udelay(40);	/* maintain the strobe during 40 us */
+	usleep_range(40, 100);	/* maintain the strobe during 40 us */
 
 	bits.e = BIT_CLR;
 	set_ctrl_bits();
 
-	udelay(120);	/* the shortest command takes at least 120 us */
+	usleep_range(120, 500);	/* the shortest command takes at least 120 us */
 	spin_unlock_irq(&pprt_lock);
 }
 

@@ -868,19 +871,20 @@ static void lcd_write_data_p8(int data)
 	spin_lock_irq(&pprt_lock);
 	/* present the data to the data port */
 	w_dtr(pprt, data);
-	udelay(20);	/* maintain the data during 20 us before the strobe */
+	/* maintain the data during 20 us before the strobe */
+	usleep_range(20, 100);
 
 	bits.e = BIT_SET;
 	bits.rs = BIT_SET;
 	bits.rw = BIT_CLR;
 	set_ctrl_bits();
 
-	udelay(40);	/* maintain the strobe during 40 us */
+	usleep_range(40, 100);	/* maintain the strobe during 40 us */
 
 	bits.e = BIT_CLR;
 	set_ctrl_bits();
 
-	udelay(45);	/* the shortest data takes at least 45 us */
+	usleep_range(45, 100);	/* the shortest data takes at least 45 us */
 	spin_unlock_irq(&pprt_lock);
 }
 

@@ -890,7 +894,7 @@ static void lcd_write_cmd_tilcd(int cmd)
 	spin_lock_irq(&pprt_lock);
 	/* present the data to the control port */
 	w_ctr(pprt, cmd);
-	udelay(60);
+	usleep_range(60, 120);
 	spin_unlock_irq(&pprt_lock);
 }
 

@@ -900,7 +904,7 @@ static void lcd_write_data_tilcd(int data)
 	spin_lock_irq(&pprt_lock);
 	/* present the data to the data port */
 	w_dtr(pprt, data);
-	udelay(60);
+	usleep_range(60, 120);
 	spin_unlock_irq(&pprt_lock);
 }
 

@@ -943,7 +947,7 @@ static void lcd_clear_fast_s(void)
 		lcd_send_serial(0x5F);	/* R/W=W, RS=1 */
 		lcd_send_serial(' ' & 0x0F);
 		lcd_send_serial((' ' >> 4) & 0x0F);
-		udelay(40);	/* the shortest data takes at least 40 us */
+		usleep_range(40, 100);	/* the shortest data takes at least 40 us */
 	}
 	spin_unlock_irq(&pprt_lock);
 

@@ -967,7 +971,7 @@ static void lcd_clear_fast_p8(void)
 		w_dtr(pprt, ' ');
 
 		/* maintain the data during 20 us before the strobe */
-		udelay(20);
+		usleep_range(20, 100);
 
 		bits.e = BIT_SET;
 		bits.rs = BIT_SET;

@@ -975,13 +979,13 @@ static void lcd_clear_fast_p8(void)
 		set_ctrl_bits();
 
 		/* maintain the strobe during 40 us */
-		udelay(40);
+		usleep_range(40, 100);
 
 		bits.e = BIT_CLR;
 		set_ctrl_bits();
 
 		/* the shortest data takes at least 45 us */
-		udelay(45);
+		usleep_range(45, 100);
 	}
 	spin_unlock_irq(&pprt_lock);
 

@@ -1003,7 +1007,7 @@ static void lcd_clear_fast_tilcd(void)
 	for (pos = 0; pos < lcd.height * lcd.hwidth; pos++) {
 		/* present the data to the data port */
 		w_dtr(pprt, ' ');
-		udelay(60);
+		usleep_range(60, 120);
 	}
 
 	spin_unlock_irq(&pprt_lock);

index 66ad4d0..13af8cf 100644
@@ -1122,8 +1122,8 @@ static inline int handle_lcd_special_code(void)
 	case '*':
 		/* flash back light using the keypad timer */
 		if (scan_timer.function) {
-			if (lcd.light_tempo == 0
-					&& ((lcd.flags & LCD_FLAG_L) == 0))
+			if (lcd.light_tempo == 0 &&
+			    ((lcd.flags & LCD_FLAG_L) == 0))
 				lcd_backlight(1);
 			lcd.light_tempo = FLASH_LIGHT_TEMPO;
 		}

@@ -2011,14 +2011,14 @@ static void panel_scan_timer(void)
 
 	if (lcd.enabled && lcd.initialized) {
 		if (keypressed) {
-			if (lcd.light_tempo == 0
-					&& ((lcd.flags & LCD_FLAG_L) == 0))
+			if (lcd.light_tempo == 0 &&
+			    ((lcd.flags & LCD_FLAG_L) == 0))
 				lcd_backlight(1);
 			lcd.light_tempo = FLASH_LIGHT_TEMPO;
 		} else if (lcd.light_tempo > 0) {
 			lcd.light_tempo--;
-			if (lcd.light_tempo == 0
-					&& ((lcd.flags & LCD_FLAG_L) == 0))
+			if (lcd.light_tempo == 0 &&
+			    ((lcd.flags & LCD_FLAG_L) == 0))
 				lcd_backlight(0);
 		}
 	}