Modify static defined and wrong parameter used.

Both of the two patches optimize the code and remove the mistakes and warnings detected by the check tools.

Changes since v1:
- Adjust the patch by the changes not by the check tools.

Eric Long (2):
coresight: "DEVICE_ATTR_RO" should defined as static.
coresight: etm4x: Check every parameter used by dma_xx_coherent.

 drivers/hwtracing/coresight/coresight-etm4x.c |    2 +-
 drivers/hwtracing/coresight/coresight-tmc.c   |    6 +++---
 drivers/hwtracing/coresight/of_coresight.c    |    2 +-
 3 files changed, 5 insertions(+), 5 deletions(-)

1.7.9.5

"DEVICE_ATTR_RO(name)" should be defined as static. And there is an unnecessary space at the front of the code.

The sparse tool output logs as the following:
coresight-etm4x.c:2224:1: warning: symbol 'dev_attr_trcoslsr' was not declared. Should it be static? coresight-etm4x.c:2225:1: warning: symbol 'dev_attr_trcpdcr' was not declared. Should it be static? coresight-etm4x.c:2226:1: warning: symbol 'dev_attr_trcpdsr' was not declared. Should it be static?
And the smatch tool output logs as the following:
of_coresight.c:89 of_coresight_alloc_memory() warn:
inconsistent indenting

---
 drivers/hwtracing/coresight/coresight-etm4x.c |    2 +-
 drivers/hwtracing/coresight/of_coresight.c    |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

index a670764..1ec6798 100644
@@ -2219,7 +2219,7 @@ static ssize_t name##_show(struct device *_dev,				\
 	return scnprintf(buf, PAGE_SIZE, "0x%x\n",			\
 			 readl_relaxed(drvdata->base + offset));	\
 }									\
-DEVICE_ATTR_RO(name)
+static DEVICE_ATTR_RO(name)
 
 coresight_simple_func(trcoslsr, TRCOSLSR);
 coresight_simple_func(trcpdcr, TRCPDCR);

index b097361..3cc57c1 100644
@@ -86,7 +86,7 @@ static int of_coresight_alloc_memory(struct device *dev,
 		return -ENOMEM;
 
 	/* Children connected to this component via @outports */
-	 pdata->child_names = devm_kzalloc(dev, pdata->nr_outport *
+	pdata->child_names = devm_kzalloc(dev, pdata->nr_outport *
 					  sizeof(*pdata->child_names),
 					  GFP_KERNEL);
 	if (!pdata->child_names)

1.7.9.5

The dma_alloc_coherent return an "void *" not an "void __iomen *". It uses the wrong parameters when calls dma_free_coherent function.

The sparse tool output logs as the following:
coresight-tmc.c:199:23: expected void *<noident>
coresight-tmc.c:199:23: got void [noderef] <asn:2>*vaddr
coresight-tmc.c:336:30: warning: incorrect type in assignment (different address spaces)
coresight-tmc.c:336:30: expected char *buf
coresight-tmc.c:336:30: got void [noderef] <asn:2>*
coresight-tmc.c:769:50: warning: incorrect type in argument 4 (different base types)
coresight-tmc.c:769:50: expected unsigned long long
[unsigned] [usertype] dma_handle
coresight-tmc.c:769:50: got restricted gfp_t

---
 drivers/hwtracing/coresight/coresight-tmc.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

index a57c7ec..5b052d1 100644
@@ -124,7 +124,7 @@ struct tmc_drvdata {
 	bool			reading;
 	char			*buf;
 	dma_addr_t		paddr;
-	void __iomem		*vaddr;
+	void			*vaddr;
 	u32			size;
 	bool			enable;
 	enum tmc_config_type	config_type;

@@ -766,7 +766,7 @@ err_misc_register:
 err_devm_kzalloc:
 	if (drvdata->config_type == TMC_CONFIG_TYPE_ETR)
 		dma_free_coherent(dev, drvdata->size,
-				&drvdata->paddr, GFP_KERNEL);
+				drvdata->vaddr, drvdata->paddr);
 	return ret;
 }
 

@@ -778,7 +778,7 @@ static int tmc_remove(struct amba_device *adev)
 	coresight_unregister(drvdata->csdev);
 	if (drvdata->config_type == TMC_CONFIG_TYPE_ETR)
 		dma_free_coherent(drvdata->dev, drvdata->size,
-				  &drvdata->paddr, GFP_KERNEL);
+				  drvdata->vaddr, drvdata->paddr);
 
 	return 0;
 }

1.7.9.5

I have applied both patches - thanks.
Mathieu