Staging: Replace ternary operators with macros min/max

PATCH Superseded Bhumika Goyal 2 participants 13 messages Feb 23, 2016 – Feb 26, 2016 Staging

Share & tools

Bhumika Goyal

author

2016-02-23 15:47 UTC #0 lore raw

v2 cover Staging: Replace ternary operators with macros min/max

This patchset replaces ternary operators with macros min/max as they are shorter and thus increases code readability. Macro min returns the minimum and macro max returns maximum of the two compared values. Made a semantic patch for changes:

@@
type T;
T x;
T y;
@@
(
- x < y ? x : y
+ min(x,y)
|
- x > y ? x : y
+ max(x,y)
)

Changes in v2:
* Use min()/max() instead of min_t()/max_t() as the values passed in the macros are of same type.

Bhumika Goyal (5):
Staging: rtl8723au: Use min macro instead of ternary operator
Staging: rdma: Use min macro instead of ternary operator
Staging: gdm724x: Use min instead of ternary operator
Staging: lustre: Use min or max instead of ternary operator
Staging: rts5208: Use min instead of ternary operator

 drivers/staging/gdm724x/gdm_mux.c                   |  2 +-
 drivers/staging/lustre/lustre/include/lustre_disk.h |  6 ++----
 drivers/staging/lustre/lustre/osc/osc_request.c     |  2 +-
 drivers/staging/lustre/lustre/ptlrpc/events.c       |  2 +-
 drivers/staging/rdma/hfi1/pio_copy.c                |  6 +++---
 drivers/staging/rtl8723au/os_dep/ioctl_cfg80211.c   | 14 +++++++-------
 drivers/staging/rts5208/sd.c                        |  4 ++--
 7 files changed, 17 insertions(+), 19 deletions(-)

Signature · 1 line

1.9.1

Bhumika Goyal

author

2016-02-23 15:48 UTC #1 lore raw

PATCH v2 1/5 Staging: rtl8723au: Use min macro instead of ternary operator

This patch replaces ternary operator with macro min as it shorter and thus increases code readability. Macro min return the minimum of the two compared values.
Made a semantic patch for changes:

@@
type T;
T x;
T y;
@@
(
- x < y ? x : y
+ min(x,y)
|
- x > y ? x : y
+ max(x,y)
)

Signed-off-by Bhumika Goyal <[email protected]>

---
Changes in v2:
Use min() instead of min_t() as the values passed in the macro are of same type.

 drivers/staging/rtl8723au/os_dep/ioctl_cfg80211.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

drivers/staging/rtl8723au/os_dep/ioctl_cfg80211.c +7 -7

index 6868392..cf0daa1 100644
@@ -542,7 +542,7 @@ static int rtw_cfg80211_ap_set_encryption(struct net_device *dev, u8 key_index,
 				memcpy(psecuritypriv->
 				       dot118021XGrpKey[key_index].skey,
 				       keyparms->key,
-				       (key_len > 16 ? 16 : key_len));
+				       (min(16, key_len)));
 
 				/* set mic key */
 				memcpy(psecuritypriv->

@@ -564,7 +564,7 @@ static int rtw_cfg80211_ap_set_encryption(struct net_device *dev, u8 key_index,
 				memcpy(psecuritypriv->
 				       dot118021XGrpKey[key_index].skey,
 				       keyparms->key,
-				       (key_len > 16 ? 16 : key_len));
+				       (min(16, key_len)));
 			} else {
 				DBG_8723A("%s, set group_key, none\n",
 					  __func__);

@@ -602,7 +602,7 @@ static int rtw_cfg80211_ap_set_encryption(struct net_device *dev, u8 key_index,
 		if (set_tx == 1) {
 			/* pairwise key */
 			memcpy(psta->dot118021x_UncstKey.skey,
-			       keyparms->key, (key_len > 16 ? 16 : key_len));
+			       keyparms->key, (min(16, key_len)));
 
 			if (keyparms->cipher == WLAN_CIPHER_SUITE_WEP40 ||
 			    keyparms->cipher == WLAN_CIPHER_SUITE_WEP104) {

@@ -660,7 +660,7 @@ static int rtw_cfg80211_ap_set_encryption(struct net_device *dev, u8 key_index,
 				memcpy(psecuritypriv->
 				       dot118021XGrpKey[key_index].skey,
 				       keyparms->key,
-				       (key_len > 16 ? 16 : key_len));
+				       (min(16, key_len)));
 
 				/* set mic key */
 				memcpy(psecuritypriv->

@@ -678,7 +678,7 @@ static int rtw_cfg80211_ap_set_encryption(struct net_device *dev, u8 key_index,
 				memcpy(psecuritypriv->
 				       dot118021XGrpKey[key_index].skey,
 				       keyparms->key,
-				       (key_len > 16 ? 16 : key_len));
+				       (min(16, key_len)));
 			} else {
 				psecuritypriv->dot118021XGrpPrivacy = 0;
 			}

@@ -788,7 +788,7 @@ static int rtw_cfg80211_set_encryption(struct net_device *dev, u8 key_index,
 
 					memcpy(psta->dot118021x_UncstKey.skey,
 					       keyparms->key,
-					       (key_len > 16 ? 16 : key_len));
+					       (min(16, key_len)));
 
 					if (keyparms->cipher ==
 					    WLAN_CIPHER_SUITE_TKIP) {

@@ -811,7 +811,7 @@ static int rtw_cfg80211_set_encryption(struct net_device *dev, u8 key_index,
 					memcpy(padapter->securitypriv.
 					       dot118021XGrpKey[key_index].skey,
 					       keyparms->key,
-					       (key_len > 16 ? 16 : key_len));
+					       (min(16, key_len)));
 					memcpy(padapter->securitypriv.
 					       dot118021XGrptxmickey[key_index].
 					       skey, &keyparms->key[16], 8);

Signature · 1 line

1.9.1

Bhumika Goyal

author

2016-02-23 15:48 UTC #2 lore raw

PATCH v2 2/5 Staging: rdma: Use min macro instead of ternary operator

In reply to Bhumika Goyal

This patch replaces ternary operator with macro min as it shorter and thus increases code readability. Macro min return the minimum of the two compared values.
Made a semantic patch for changes:

@@
type T;
T x;
T y;
@@
(
- x < y ? x : y
+ min(x,y)
|
- x > y ? x : y
+ max(x,y)
)

Signed-off-by Bhumika Goyal <[email protected]>

---
Changes in v2:
Use min() instead of min_t() as the values passed in the macro are of same type.

 drivers/staging/rdma/hfi1/pio_copy.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

drivers/staging/rdma/hfi1/pio_copy.c +3 -3

index ebb0baf..64bef6c2 100644
@@ -235,7 +235,7 @@ static inline void read_extra_bytes(struct pio_buf *pbuf,
 	while (nbytes) {
 		/* find the number of bytes in this u64 */
 		room = 8 - off;	/* this u64 has room for this many bytes */
-		xbytes = nbytes > room ? room : nbytes;
+		xbytes = min(room, nbytes);
 
 		/*
 		 * shift down to zero lower bytes, shift up to zero upper

@@ -565,7 +565,7 @@ static void mid_copy_mix(struct pio_buf *pbuf, const void *from, size_t nbytes)
 		/* calculate the end of data or end of block, whichever
 		   comes first */
 		send = pbuf->start + PIO_BLOCK_SIZE;
-		xend = send < dend ? send : dend;
+		xend = min(send, dend);
 
 		/* shift up to SOP=1 space */
 		dest += SOP_DISTANCE;

@@ -659,7 +659,7 @@ static void mid_copy_straight(struct pio_buf *pbuf,
 		/* calculate the end of data or end of block, whichever
 		   comes first */
 		send = pbuf->start + PIO_BLOCK_SIZE;
-		xend = send < dend ? send : dend;
+		xend = min(send, dend);
 
 		/* shift up to SOP=1 space */
 		dest += SOP_DISTANCE;

Signature · 1 line

1.9.1

Bhumika Goyal

author

2016-02-23 15:48 UTC #3 lore raw

PATCH v2 3/5 Staging: gdm724x: Use min instead of ternary operator

In reply to Bhumika Goyal

This patch replaces ternary operator with macro min as it shorter and thus increases code readability. Macro min return the minimum of the two compared values.
Made a semantic patch for changes:

@@
type T;
T x;
T y;
@@
(
- x < y ? x : y
+ min(x,y)
|
- x > y ? x : y
+ max(x,y)
)

Signed-off-by Bhumika Goyal <[email protected]>

---
Changes in v2:
Use min() instead of min_t() as the values passed in the macro are of same type.

 drivers/staging/gdm724x/gdm_mux.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/staging/gdm724x/gdm_mux.c +1 -1

index 937010b..6bedd66 100644
@@ -433,7 +433,7 @@ static int gdm_mux_send_control(void *priv_dev, int request, int value,
 	if (ret < 0)
 		pr_err("usb_control_msg error: %d\n", ret);
 
-	return ret < 0 ? ret : 0;
+	return min(ret, 0);
 }
 
 static void release_usb(struct mux_dev *mux_dev)

Signature · 1 line

1.9.1

Bhumika Goyal

author

2016-02-23 15:48 UTC #4 lore raw

PATCH v2 4/5 Staging: lustre: Use min or max instead of ternary operator

In reply to Bhumika Goyal

Replace ternary operators with macros min/max as they are shorter and thus increases code readability. Macro min returns the minimum and max returns maximum of the two compared values. Made a semantic patch for changes:

@@
type T;
T x;
T y;
@@
(
- x < y ? x : y
+ min(x,y)
|
- x > y ? x : y
+ max(x,y)
)

Signed-off-by Bhumika Goyal <[email protected]>

---
Changes in v2:
Use min()/max() instead of min_t()/max_t() as the values passed in the macros are of same type.

 drivers/staging/lustre/lustre/include/lustre_disk.h | 6 ++----
 drivers/staging/lustre/lustre/osc/osc_request.c     | 2 +-
 drivers/staging/lustre/lustre/ptlrpc/events.c       | 2 +-
 3 files changed, 4 insertions(+), 6 deletions(-)

drivers/staging/lustre/lustre/include/lustre_disk.h +2 -4

index 7c6933f..8254428 100644
@@ -331,14 +331,12 @@ static inline void lcd_cpu_to_le(struct lsd_client_data *lcd,
 
 static inline __u64 lcd_last_transno(struct lsd_client_data *lcd)
 {
-	return (lcd->lcd_last_transno > lcd->lcd_last_close_transno ?
-		lcd->lcd_last_transno : lcd->lcd_last_close_transno);
+	return max(lcd->lcd_last_transno, lcd->lcd_last_close_transno);
 }
 
 static inline __u64 lcd_last_xid(struct lsd_client_data *lcd)
 {
-	return (lcd->lcd_last_xid > lcd->lcd_last_close_xid ?
-		lcd->lcd_last_xid : lcd->lcd_last_close_xid);
+	return max(lcd->lcd_last_xid, lcd->lcd_last_close_xid);
 }
 
 /****************** superblock additional info *********************/

drivers/staging/lustre/lustre/osc/osc_request.c +1 -1

index 43b11c6..b48c23e 100644
@@ -1170,7 +1170,7 @@ static u32 osc_checksum_bulk(int nob, u32 pg_count,
 	}
 
 	while (nob > 0 && pg_count > 0) {
-		int count = pga[i]->count > nob ? nob : pga[i]->count;
+		int count = min(nob, pga[i]->count);
 
 		/* corrupt the data before we compute the checksum, to
 		 * simulate an OST->client data error */

drivers/staging/lustre/lustre/ptlrpc/events.c +1 -1

index 64eaa0e..dc2996f 100644
@@ -254,7 +254,7 @@ static void ptlrpc_req_add_history(struct ptlrpc_service_part *svcpt,
 
 	new_seq = (sec << REQS_SEC_SHIFT) |
 		  (usec << REQS_USEC_SHIFT) |
-		  (svcpt->scp_cpt < 0 ? 0 : svcpt->scp_cpt);
+		  (max(0, svcpt->scp_cpt));
 
 	if (new_seq > svcpt->scp_hist_seq) {
 		/* This handles the initial case of scp_hist_seq == 0 or

Signature · 1 line

1.9.1

Greg KH

maintainer

2016-02-26 06:18 UTC #5 lore raw

Re: [Outreachy kernel] [PATCH v2 4/5] Staging: lustre: Use min or max instead of ternary operator

Quoted 68 lines · Bhumika Goyal

@@
type T;
T x;
T y;
@@
(
- x < y ? x : y
+ min(x,y)
|
- x > y ? x : y
+ max(x,y)
)

Signed-off-by Bhumika Goyal <[email protected]>

---
Changes in v2:
Use min()/max() instead of min_t()/max_t() as the values passed in the macros are of same type.

 drivers/staging/lustre/lustre/include/lustre_disk.h | 6 ++----
 drivers/staging/lustre/lustre/osc/osc_request.c     | 2 +-
 drivers/staging/lustre/lustre/ptlrpc/events.c       | 2 +-
 3 files changed, 4 insertions(+), 6 deletions(-)

drivers/staging/lustre/lustre/include/lustre_disk.h +2 -4

index 7c6933f..8254428 100644
@@ -331,14 +331,12 @@ static inline void lcd_cpu_to_le(struct lsd_client_data *lcd,
 
 static inline __u64 lcd_last_transno(struct lsd_client_data *lcd)
 {
-	return (lcd->lcd_last_transno > lcd->lcd_last_close_transno ?
-		lcd->lcd_last_transno : lcd->lcd_last_close_transno);
+	return max(lcd->lcd_last_transno, lcd->lcd_last_close_transno);
 }
 
 static inline __u64 lcd_last_xid(struct lsd_client_data *lcd)
 {
-	return (lcd->lcd_last_xid > lcd->lcd_last_close_xid ?
-		lcd->lcd_last_xid : lcd->lcd_last_close_xid);
+	return max(lcd->lcd_last_xid, lcd->lcd_last_close_xid);
 }
 
 /****************** superblock additional info *********************/

drivers/staging/lustre/lustre/osc/osc_request.c +1 -1

index 43b11c6..b48c23e 100644
@@ -1170,7 +1170,7 @@ static u32 osc_checksum_bulk(int nob, u32 pg_count,
 	}
 
 	while (nob > 0 && pg_count > 0) {
-		int count = pga[i]->count > nob ? nob : pga[i]->count;
+		int count = min(nob, pga[i]->count);
 
 		/* corrupt the data before we compute the checksum, to
 		 * simulate an OST->client data error */

drivers/staging/lustre/lustre/ptlrpc/events.c +0 -0

index 64eaa0e..dc2996f 100644

drivers/staging/lustre/lustre/ptlrpc/events.c static void ptlrpc_req_add_history(struct ptlrpc_service_part *svcpt, · line 260

Quoted 8 lines

drivers/staging/lustre/lustre/ptlrpc/events.c +1 -1

@@ -254,7 +254,7 @@ static void ptlrpc_req_add_history(struct ptlrpc_service_part *svcpt,
 
 	new_seq = (sec << REQS_SEC_SHIFT) |
 		  (usec << REQS_USEC_SHIFT) |
-		  (svcpt->scp_cpt < 0 ? 0 : svcpt->scp_cpt);
+		  (max(0, svcpt->scp_cpt));
 
 	if (new_seq > svcpt->scp_hist_seq) {
 		/* This handles the initial case of scp_hist_seq == 0 or

Doesn't apply due to other changes in this code from other developers. Please rebase and resend.

thanks,

greg k-h

Bhumika Goyal

author

2016-02-23 15:48 UTC #6 lore raw

PATCH v2 5/5 Staging: rts5208: Use min instead of ternary operator

In reply to Bhumika Goyal

This patch replaces ternary operator with macro min as it shorter and thus increases code readability. Macro min returns the minimum of the two compared values.
Made a semantic patch for changes:

@@
type T;
T x;
T y;
@@
(
- x < y ? x : y
+ min(x,y)
|
- x > y ? x : y
+ max(x,y)
)

Signed-off-by Bhumika Goyal <[email protected]>

---
Changes in v2:
Use min() instead of min_t() as the values passed in the macro are of same type.

 drivers/staging/rts5208/sd.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

drivers/staging/rts5208/sd.c +2 -2

index 244d589..1612610 100644
@@ -303,7 +303,7 @@ static int sd_read_data(struct rtsx_chip *chip,
 
 	if (cmd_len) {
 		dev_dbg(rtsx_dev(chip), "SD/MMC CMD %d\n", cmd[0] - 0x40);
-		for (i = 0; i < (cmd_len < 6 ? cmd_len : 6); i++)
+		for (i = 0; i < (min(cmd_len, 6)); i++)
 			rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_CMD0 + i,
 				     0xFF, cmd[i]);
 	}

@@ -383,7 +383,7 @@ static int sd_write_data(struct rtsx_chip *chip, u8 trans_mode,
 
 	if (cmd_len) {
 		dev_dbg(rtsx_dev(chip), "SD/MMC CMD %d\n", cmd[0] - 0x40);
-		for (i = 0; i < (cmd_len < 6 ? cmd_len : 6); i++) {
+		for (i = 0; i < (min(cmd_len, 6)); i++) {
 			rtsx_add_cmd(chip, WRITE_REG_CMD,
 				     REG_SD_CMD0 + i, 0xFF, cmd[i]);
 		}

Signature · 1 line

1.9.1

Bhumika Goyal

author

2016-02-26 10:04 UTC #7 lore raw

v3 cover Staging: Replace ternary operators with macros min/max

In reply to Bhumika Goyal

@@
type T;
T x;
T y;
@@
(
- x < y ? x : y
+ min(x,y)
|
- x > y ? x : y
+ max(x,y)
)

Changes in v2:
* Use min()/max() instead of min_t()/max_t() as the values passed in the macros are of same type.
Changes in v3:
* No change.

 drivers/staging/gdm724x/gdm_mux.c                   |  2 +-
 drivers/staging/lustre/lustre/include/lustre_disk.h |  6 ++----
 drivers/staging/lustre/lustre/osc/osc_request.c     |  2 +-
 drivers/staging/lustre/lustre/ptlrpc/events.c       |  2 +-
 drivers/staging/rdma/hfi1/pio_copy.c                |  6 +++---
 drivers/staging/rtl8723au/os_dep/ioctl_cfg80211.c   | 14 +++++++-------
 drivers/staging/rts5208/sd.c                        |  4 ++--
 7 files changed, 17 insertions(+), 19 deletions(-)

Signature · 1 line

1.9.1

Bhumika Goyal

author

2016-02-26 10:04 UTC #8 lore raw

PATCH v3 1/5 Staging: rtl8723au: Use min macro instead of ternary operator

This patch replaces ternary operator with macro min as it shorter and thus increases code readability. Macro min return the minimum of the two compared values.
Made a semantic patch for changes:

@@
type T;
T x;
T y;
@@
(
- x < y ? x : y
+ min(x,y)
|
- x > y ? x : y
+ max(x,y)
)

Signed-off-by Bhumika Goyal <[email protected]>

---
Changes in v2:
Use min() instead of min_t() as the values passed in the macro are of same type.
Changes in v3:
* No change.

drivers/staging/rtl8723au/os_dep/ioctl_cfg80211.c | 14 +++++++-------

 1 file changed, 7 insertions(+), 7 deletions(-)

drivers/staging/rtl8723au/os_dep/ioctl_cfg80211.c +7 -7

index 6868392..cf0daa1 100644
@@ -542,7 +542,7 @@ static int rtw_cfg80211_ap_set_encryption(struct net_device *dev, u8 key_index,
 				memcpy(psecuritypriv->
 				       dot118021XGrpKey[key_index].skey,
 				       keyparms->key,
-				       (key_len > 16 ? 16 : key_len));
+				       (min(16, key_len)));
 
 				/* set mic key */
 				memcpy(psecuritypriv->

@@ -564,7 +564,7 @@ static int rtw_cfg80211_ap_set_encryption(struct net_device *dev, u8 key_index,
 				memcpy(psecuritypriv->
 				       dot118021XGrpKey[key_index].skey,
 				       keyparms->key,
-				       (key_len > 16 ? 16 : key_len));
+				       (min(16, key_len)));
 			} else {
 				DBG_8723A("%s, set group_key, none\n",
 					  __func__);

@@ -602,7 +602,7 @@ static int rtw_cfg80211_ap_set_encryption(struct net_device *dev, u8 key_index,
 		if (set_tx == 1) {
 			/* pairwise key */
 			memcpy(psta->dot118021x_UncstKey.skey,
-			       keyparms->key, (key_len > 16 ? 16 : key_len));
+			       keyparms->key, (min(16, key_len)));
 
 			if (keyparms->cipher == WLAN_CIPHER_SUITE_WEP40 ||
 			    keyparms->cipher == WLAN_CIPHER_SUITE_WEP104) {

@@ -660,7 +660,7 @@ static int rtw_cfg80211_ap_set_encryption(struct net_device *dev, u8 key_index,
 				memcpy(psecuritypriv->
 				       dot118021XGrpKey[key_index].skey,
 				       keyparms->key,
-				       (key_len > 16 ? 16 : key_len));
+				       (min(16, key_len)));
 
 				/* set mic key */
 				memcpy(psecuritypriv->

@@ -678,7 +678,7 @@ static int rtw_cfg80211_ap_set_encryption(struct net_device *dev, u8 key_index,
 				memcpy(psecuritypriv->
 				       dot118021XGrpKey[key_index].skey,
 				       keyparms->key,
-				       (key_len > 16 ? 16 : key_len));
+				       (min(16, key_len)));
 			} else {
 				psecuritypriv->dot118021XGrpPrivacy = 0;
 			}

@@ -788,7 +788,7 @@ static int rtw_cfg80211_set_encryption(struct net_device *dev, u8 key_index,
 
 					memcpy(psta->dot118021x_UncstKey.skey,
 					       keyparms->key,
-					       (key_len > 16 ? 16 : key_len));
+					       (min(16, key_len)));
 
 					if (keyparms->cipher ==
 					    WLAN_CIPHER_SUITE_TKIP) {

@@ -811,7 +811,7 @@ static int rtw_cfg80211_set_encryption(struct net_device *dev, u8 key_index,
 					memcpy(padapter->securitypriv.
 					       dot118021XGrpKey[key_index].skey,
 					       keyparms->key,
-					       (key_len > 16 ? 16 : key_len));
+					       (min(16, key_len)));
 					memcpy(padapter->securitypriv.
 					       dot118021XGrptxmickey[key_index].
 					       skey, &keyparms->key[16], 8);

Signature · 1 line

1.9.1

Bhumika Goyal

author

2016-02-26 10:05 UTC #9 lore raw

PATCH v3 2/5 Staging: rdma: Use min macro instead of ternary operator

In reply to Bhumika Goyal

This patch replaces ternary operator with macro min as it shorter and thus increases code readability. Macro min return the minimum of the two compared values.
Made a semantic patch for changes:

@@
type T;
T x;
T y;
@@
(
- x < y ? x : y
+ min(x,y)
|
- x > y ? x : y
+ max(x,y)
)

Signed-off-by Bhumika Goyal <[email protected]>

---
Changes in v2:
Use min() instead of min_t() as the values passed in the macro are of same type.

Changes in v3:
* No change.

 drivers/staging/rdma/hfi1/pio_copy.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

drivers/staging/rdma/hfi1/pio_copy.c +3 -3

index ebb0baf..64bef6c2 100644
@@ -235,7 +235,7 @@ static inline void read_extra_bytes(struct pio_buf *pbuf,
 	while (nbytes) {
 		/* find the number of bytes in this u64 */
 		room = 8 - off;	/* this u64 has room for this many bytes */
-		xbytes = nbytes > room ? room : nbytes;
+		xbytes = min(room, nbytes);
 
 		/*
 		 * shift down to zero lower bytes, shift up to zero upper

@@ -565,7 +565,7 @@ static void mid_copy_mix(struct pio_buf *pbuf, const void *from, size_t nbytes)
 		/* calculate the end of data or end of block, whichever
 		   comes first */
 		send = pbuf->start + PIO_BLOCK_SIZE;
-		xend = send < dend ? send : dend;
+		xend = min(send, dend);
 
 		/* shift up to SOP=1 space */
 		dest += SOP_DISTANCE;

@@ -659,7 +659,7 @@ static void mid_copy_straight(struct pio_buf *pbuf,
 		/* calculate the end of data or end of block, whichever
 		   comes first */
 		send = pbuf->start + PIO_BLOCK_SIZE;
-		xend = send < dend ? send : dend;
+		xend = min(send, dend);
 
 		/* shift up to SOP=1 space */
 		dest += SOP_DISTANCE;

Signature · 1 line

1.9.1

Bhumika Goyal

author

2016-02-26 10:05 UTC #10 lore raw

PATCH v3 3/5 Staging: gdm724x: Use min instead of ternary operator

In reply to Bhumika Goyal

This patch replaces ternary operator with macro min as it shorter and thus increases code readability. Macro min return the minimum of the two compared values.
Made a semantic patch for changes:

@@
type T;
T x;
T y;
@@
(
- x < y ? x : y
+ min(x,y)
|
- x > y ? x : y
+ max(x,y)
)

Signed-off-by Bhumika Goyal <[email protected]>

---
Changes in v2:
Use min() instead of min_t() as the values passed in the macro are of same type.
Changes in v3:
No change

 drivers/staging/gdm724x/gdm_mux.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/staging/gdm724x/gdm_mux.c +1 -1

index 937010b..6bedd66 100644
@@ -433,7 +433,7 @@ static int gdm_mux_send_control(void *priv_dev, int request, int value,
 	if (ret < 0)
 		pr_err("usb_control_msg error: %d\n", ret);
 
-	return ret < 0 ? ret : 0;
+	return min(ret, 0);
 }
 
 static void release_usb(struct mux_dev *mux_dev)

Signature · 1 line

1.9.1

Bhumika Goyal

author

2016-02-26 10:05 UTC #11 lore raw

PATCH v3 4/5 Staging: lustre: Use min or max instead of ternary operator

In reply to Bhumika Goyal

@@
type T;
T x;
T y;
@@
(
- x < y ? x : y
+ min(x,y)
|
- x > y ? x : y
+ max(x,y)
)

Signed-off-by Bhumika Goyal <[email protected]>

---
Changes in v2:
Use min()/max() instead of min_t()/max_t() as the values passed in the macros are of same type.
Changes in v3:
No change

 drivers/staging/lustre/lustre/include/lustre_disk.h | 6 ++----
 drivers/staging/lustre/lustre/osc/osc_request.c     | 2 +-
 drivers/staging/lustre/lustre/ptlrpc/events.c       | 2 +-
 3 files changed, 4 insertions(+), 6 deletions(-)

drivers/staging/lustre/lustre/include/lustre_disk.h +2 -4

index 0f06feb..c437631 100644
@@ -337,14 +337,12 @@ static inline void lcd_cpu_to_le(struct lsd_client_data *lcd,
 
 static inline __u64 lcd_last_transno(struct lsd_client_data *lcd)
 {
-	return (lcd->lcd_last_transno > lcd->lcd_last_close_transno ?
-		lcd->lcd_last_transno : lcd->lcd_last_close_transno);
+	return (max(lcd->lcd_last_transno, lcd->lcd_last_close_transno));
 }
 
 static inline __u64 lcd_last_xid(struct lsd_client_data *lcd)
 {
-	return (lcd->lcd_last_xid > lcd->lcd_last_close_xid ?
-		lcd->lcd_last_xid : lcd->lcd_last_close_xid);
+	return (max(lcd->lcd_last_xid, lcd->lcd_last_close_xid));
 }
 
 >>>>>>> Staging: lustre: Use min_t and max_t instead of ternary operator

drivers/staging/lustre/lustre/osc/osc_request.c +1 -1

index 10f262f..578e98a 100644
@@ -1181,7 +1181,7 @@ static u32 osc_checksum_bulk(int nob, u32 pg_count,
 	}
 
 	while (nob > 0 && pg_count > 0) {
-		int count = pga[i]->count > nob ? nob : pga[i]->count;
+		int count = min(nob, pga[i]->count);
 
 		/* corrupt the data before we compute the checksum, to
 		 * simulate an OST->client data error

drivers/staging/lustre/lustre/ptlrpc/events.c +1 -1

index 47be21a..9ef3b26 100644
@@ -260,7 +260,7 @@ static void ptlrpc_req_add_history(struct ptlrpc_service_part *svcpt,
 
 	new_seq = (sec << REQS_SEC_SHIFT) |
 		  (usec << REQS_USEC_SHIFT) |
-		  (svcpt->scp_cpt < 0 ? 0 : svcpt->scp_cpt);
+		  (max(0, svcpt->scp_cpt));
 
 	if (new_seq > svcpt->scp_hist_seq) {
 		/* This handles the initial case of scp_hist_seq == 0 or

Signature · 1 line

1.9.1

Bhumika Goyal

author

2016-02-26 10:05 UTC #12 lore raw

PATCH v3 5/5 Staging: rts5208: Use min instead of ternary operator

In reply to Bhumika Goyal

This patch replaces ternary operator with macro min as it shorter and thus increases code readability. Macro min returns the minimum of the two compared values.
Made a semantic patch for changes:

@@
type T;
T x;
T y;
@@
(
- x < y ? x : y
+ min(x,y)
|
- x > y ? x : y
+ max(x,y)
)

Signed-off-by Bhumika Goyal <[email protected]>

---
Changes in v2:
Use min() instead of min_t() as the values passed in the macro are of same type.
Changes in v3:
No change

 drivers/staging/rts5208/sd.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

drivers/staging/rts5208/sd.c +2 -2

index 244d589..1612610 100644
@@ -303,7 +303,7 @@ static int sd_read_data(struct rtsx_chip *chip,
 
 	if (cmd_len) {
 		dev_dbg(rtsx_dev(chip), "SD/MMC CMD %d\n", cmd[0] - 0x40);
-		for (i = 0; i < (cmd_len < 6 ? cmd_len : 6); i++)
+		for (i = 0; i < (min(cmd_len, 6)); i++)
 			rtsx_add_cmd(chip, WRITE_REG_CMD, REG_SD_CMD0 + i,
 				     0xFF, cmd[i]);
 	}

@@ -383,7 +383,7 @@ static int sd_write_data(struct rtsx_chip *chip, u8 trans_mode,
 
 	if (cmd_len) {
 		dev_dbg(rtsx_dev(chip), "SD/MMC CMD %d\n", cmd[0] - 0x40);
-		for (i = 0; i < (cmd_len < 6 ? cmd_len : 6); i++) {
+		for (i = 0; i < (min(cmd_len, 6)); i++) {
 			rtsx_add_cmd(chip, WRITE_REG_CMD,
 				     REG_SD_CMD0 + i, 0xFF, cmd[i]);
 		}

Signature · 1 line

1.9.1