staging: rtl8188eu: usb_halinit.c: fixes multiple erros and warnings
cover staging: rtl8188eu: usb_halinit.c: fixes multiple erros and warnings
This patchset aims to fix multiple warnings and erros caused by malformed comments and coding style. There are many old comments in usb_halinit.c. Most of them were reformatted to match convention, but an evaluation is needed to see if they are still relevant.
Juliana Rodrigues (6):
staging: rtl8188eu: usb_halinit.c: fixed multiple warnings
staging: rtl8188eu: usb_halinit.c: fixed comment blocks
staging: rtl8188eu: usb_halinit.c: fixes comparison warning
staging: rtl8188eu: usb_halinit.c: remove unnecessary braces
staging: rtl8188eu: usb_halinit.c: removes unnecessary parentheses
staging: rtl8188eu: usb_halinit.c: removes else after return
drivers/staging/rtl8188eu/hal/usb_halinit.c | 959 +++++++++++++++++----------- 1 file changed, 592 insertions(+), 367 deletions(-)
Signature · 1 line
2.7.2
PATCH 1/6 staging: rtl8188eu: usb_halinit.c: fixed multiple warnings
This patch fixes multiple "line over 80 characters" checkpatch.pl warnings and also makes some changes to make the code more readable.
Signed-off-by Juliana Rodrigues <[email protected]>
--- drivers/staging/rtl8188eu/hal/usb_halinit.c | 681 ++++++++++++++++++---------- 1 file changed, 433 insertions(+), 248 deletions(-)
drivers/staging/rtl8188eu/hal/usb_halinit.c +433 -248
@@ -51,10 +51,12 @@ static void _ConfigNormalChipOutEP_8188E(struct adapter *adapt, u8 NumOutPipe)default :break ; } -DBG_88E ("%s OutEpQueueSel(0x%02x), OutEpNumber(%d)\n" , __func__, haldata->OutEpQueueSel, haldata->OutEpNumber); +DBG_88E ("%s OutEpQueueSel(0x%02x), OutEpNumber(%d)\n" , __func__, + haldata->OutEpQueueSel, haldata->OutEpNumber); } -static bool HalUsbSetQueuePipeMapping8188EUsb (struct adapter *adapt,u8 NumInPipe,u8 NumOutPipe) +static bool HalUsbSetQueuePipeMapping8188EUsb (struct adapter *adapt, +u8 NumInPipe,u8 NumOutPipe) {struct hal_data_8188e *haldata =GET_HAL_DATA (adapt);bool result = false;
@@ -67,7 +69,9 @@ static bool HalUsbSetQueuePipeMapping8188EUsb(struct adapter *adapt, u8 NumInPipreturn result; } -/* All config other than above support one Bulk IN and one Interrupt IN. */ +/* All config other than above support +* one Bulk IN and one Interrupt IN. +*/ result =Hal_MappingOutPipe (adapt, NumOutPipe);
@@ -80,9 +84,11 @@ static void rtl8188eu_interface_configure(struct adapter *adapt)struct dvobj_priv *pdvobjpriv =adapter_to_dvobj (adapt);if (pdvobjpriv->ishighspeed) - haldata->UsbBulkOutSize =USB_HIGH_SPEED_BULK_SIZE ;/* 512 bytes */ +/* 512 bytes */ + haldata->UsbBulkOutSize =USB_HIGH_SPEED_BULK_SIZE ;else - haldata->UsbBulkOutSize =USB_FULL_SPEED_BULK_SIZE ;/* 64 bytes */ +/* 64 bytes */ + haldata->UsbBulkOutSize =USB_FULL_SPEED_BULK_SIZE ; haldata->interfaceIndex = pdvobjpriv->InterfaceNumber;
@@ -93,17 +99,21 @@ static void rtl8188eu_interface_configure(struct adapter *adapt) haldata->UsbRxAggBlockCount =8 ;/* unit : 512b */ haldata->UsbRxAggBlockTimeout =0x6 ; haldata->UsbRxAggPageCount =48 ;/* uint :128 b 0x0A; 10 = MAX_RX_DMA_BUFFER_SIZE/2/haldata->UsbBulkOutSize */ - haldata->UsbRxAggPageTimeout =0x4 ;/* 6, absolute time = 34ms/(2^6) */ + haldata->UsbRxAggPageTimeout =0x4 ;/* 6, +* absolute time = 34ms/(2^6) +*/ HalUsbSetQueuePipeMapping8188EUsb (adapt, - pdvobjpriv->RtNumInPipes, pdvobjpriv->RtNumOutPipes); + pdvobjpriv->RtNumInPipes, + pdvobjpriv->RtNumOutPipes); }static u32 rtl8188eu_InitPowerOn (struct adapter *adapt) {u16 value16;/* HW Power on sequence */ -struct hal_data_8188e *haldata =GET_HAL_DATA (adapt); +struct hal_data_8188e *haldata =GET_HAL_DATA (adapt); +if (haldata->bMacPwrCtrlOn)return _SUCCESS;
@@ -113,15 +123,23 @@ static u32 rtl8188eu_InitPowerOn(struct adapter *adapt)return _FAIL; } -/* Enable MAC DMA/WMAC/SCHEDULE/SEC block */ -/* Set CR bit10 to enable 32k calibration. Suggested by SD1 Gimmy. Added by tynli. 2011.08.31. */ -usb_write16 (adapt,REG_CR ,0x00 );/* suggseted by zhouzhou, by page, 20111230 */ +/* Enable MAC DMA/WMAC/SCHEDULE/SEC block +* Set CR bit10 to enable 32k calibration. +* Suggested by SD1 Gimmy. Added by tynli. +* 2011.08.31. +*/ -/* Enable MAC DMA/WMAC/SCHEDULE/SEC block */ +/* suggseted by zhouzhou, by page, 20111230 */ +usb_write16 (adapt,REG_CR ,0x00 ); + +/* Enable MAC DMA/WMAC/SCHEDULE/SEC block */ value16 =usb_read16 (adapt,REG_CR ); - value16 |= (HCI_TXDMA_EN |HCI_RXDMA_EN |TXDMA_EN |RXDMA_EN - |PROTOCOL_EN |SCHEDULE_EN |ENSEC |CALTMR_EN ); -/* for SDIO - Set CR bit10 to enable 32k calibration. Suggested by SD1 Gimmy. Added by tynli. 2011.08.31. */ + value16 |= (HCI_TXDMA_EN |HCI_RXDMA_EN |TXDMA_EN |RXDMA_EN | +PROTOCOL_EN |SCHEDULE_EN |ENSEC |CALTMR_EN ); + +/* for SDIO - Set CR bit10 to enable 32k calibration. +* Suggested by SD1 Gimmy. Added by tynli. 2011.08.31. +*/ usb_write16 (adapt,REG_CR , value16); haldata->bMacPwrCtrlOn = true;
@@ -143,13 +161,15 @@ static void _InitInterrupt(struct adapter *Adapter)usb_write32 (Adapter,REG_HIMR_88E , imr); haldata->IntrMask[0 ] = imr; - imr_ex =IMR_TXERR_88E |IMR_RXERR_88E |IMR_TXFOVW_88E |IMR_RXFOVW_88E ; + imr_ex =IMR_TXERR_88E |IMR_RXERR_88E | +IMR_TXFOVW_88E |IMR_RXFOVW_88E ;usb_write32 (Adapter,REG_HIMRE_88E , imr_ex); haldata->IntrMask[1 ] = imr_ex; -/* REG_USB_SPECIAL_OPTION - BIT(4) */ -/* 0; Use interrupt endpoint to upload interrupt pkt */ -/* 1; Use bulk endpoint to upload interrupt pkt, */ +/* REG_USB_SPECIAL_OPTION - BIT(4) +* 0; Use interrupt endpoint to upload interrupt pkt +* 1; Use bulk endpoint to upload interrupt pkt, +*/ usb_opt =usb_read8 (Adapter,REG_USB_SPECIAL_OPTION );if (!adapter_to_dvobj (Adapter)->ishighspeed)
@@ -179,7 +199,7 @@ static void _InitQueueReservedPage(struct adapter *Adapter)if (haldata->OutEpQueueSel &TX_SELE_LQ ) numLQ =0x1C ; -/* NOTE: This step shall be proceed before writting REG_RQPN. */ +/* NOTE: This step shall be proceed before writting REG_RQPN. */ if (haldata->OutEpQueueSel &TX_SELE_NQ ) numNQ =0x1C ; value8 = (u8 )_NPQ (numNQ);
@@ -191,9 +211,11 @@ static void _InitQueueReservedPage(struct adapter *Adapter) value32 =_HPQ (numHQ) |_LPQ (numLQ) |_PUBQ (numPubQ) |LD_RQPN ;usb_write32 (Adapter,REG_RQPN , value32); }else { -usb_write16 (Adapter,REG_RQPN_NPQ ,0x0000 );/* Just follow MP Team,??? Georgia 03/28 */ +/* Just follow MP Team,??? Georgia 03/28 */ +usb_write16 (Adapter,REG_RQPN_NPQ ,0x0000 );usb_write16 (Adapter,REG_RQPN_NPQ ,0x0d ); -usb_write32 (Adapter,REG_RQPN ,0x808E000d );/* reserve 7 page for LPS */ +/* reserve 7 page for LPS */ +usb_write32 (Adapter,REG_RQPN ,0x808E000d ); } }
@@ -209,7 +231,6 @@ static void _InitTxBufferBoundary(struct adapter *Adapter, u8 txpktbuf_bndy)static void _InitPageBoundary (struct adapter *Adapter) {/* RX Page Boundary */ -/* */ u16 rxff_bndy =MAX_RX_DMA_BUFFER_SIZE_88E -1 ;usb_write16 (Adapter, (REG_TRXFF_BNDY +2 ), rxff_bndy);
@@ -233,6 +254,7 @@ static void _InitNormalChipOneOutEpPriority(struct adapter *Adapter)struct hal_data_8188e *haldata =GET_HAL_DATA (Adapter);u16 value =0 ; +switch (haldata->OutEpQueueSel) {case TX_SELE_HQ : value =QUEUE_HIGH ;
@@ -369,7 +391,9 @@ static void _InitWMACSetting(struct adapter *Adapter)RCR_APP_ICV |RCR_AMF |RCR_HTC_LOC_CTRL |RCR_APP_MIC |RCR_APP_PHYSTS ; -/* some REG_RCR will be modified later by phy_ConfigMACWithHeaderFile() */ +/* some REG_RCR will be modified later +* by phy_ConfigMACWithHeaderFile() +*/ usb_write32 (Adapter,REG_RCR , haldata->ReceiveConfig);/* Accept all multicast address */
@@ -444,20 +468,20 @@ static void _InitRetryFunction(struct adapter *Adapter) }/*----------------------------------------------------------------------------- -* Function: usb_AggSettingTxUpdate() -* -* Overview: Separate TX/RX parameters update independent for TP detection and -* dynamic TX/RX aggreagtion parameters update. -* -* Input: struct adapter * -* -* Output/Return: NONE -* -* Revised History: -* When Who Remark -* 12/10/2010 MHC Separate to smaller function. -* -*---------------------------------------------------------------------------*/ +* Function: usb_AggSettingTxUpdate() +* +* Overview: Separate TX/RX parameters update independent for TP detection +* and dynamic TX/RX aggreagtion parameters update. +* +* Input: struct adapter * +* +* Output/Return: NONE +* +* Revised History: +* When Who Remark +* 12/10/2010 MHC Separate to smaller function. +* +*---------------------------------------------------------------------------*/ static void usb_AggSettingTxUpdate (struct adapter *Adapter) {struct hal_data_8188e *haldata =GET_HAL_DATA (Adapter);
@@ -469,7 +493,8 @@ static void usb_AggSettingTxUpdate(struct adapter *Adapter)if (haldata->UsbTxAggMode) { value32 =usb_read32 (Adapter,REG_TDECTRL ); value32 = value32 & ~(BLK_DESC_NUM_MASK <<BLK_DESC_NUM_SHIFT ); - value32 |= ((haldata->UsbTxAggDescNum &BLK_DESC_NUM_MASK ) <<BLK_DESC_NUM_SHIFT ); + value32 |= ((haldata->UsbTxAggDescNum &BLK_DESC_NUM_MASK ) + <<BLK_DESC_NUM_SHIFT );usb_write32 (Adapter,REG_TDECTRL , value32); }
@@ -478,8 +503,8 @@ static void usb_AggSettingTxUpdate(struct adapter *Adapter)/*----------------------------------------------------------------------------- * Function: usb_AggSettingRxUpdate() * -* Overview: Separate TX/RX parameters update independent for TP detection and -* dynamic TX/RX aggreagtion parameters update. +* Overview: Separate TX/RX parameters update independent for TP detection +* and dynamic TX/RX aggreagtion parameters update. * * Input: struct adapter * *
@@ -490,10 +515,7 @@ static void usb_AggSettingTxUpdate(struct adapter *Adapter)* 12/10/2010 MHC Separate to smaller function. * *---------------------------------------------------------------------------*/ -static void -usb_AggSettingRxUpdate ( -struct adapter *Adapter - ) +static void usb_AggSettingRxUpdate (struct adapter *Adapter) {struct hal_data_8188e *haldata =GET_HAL_DATA (Adapter);u8 valueDMA;
@@ -527,22 +549,30 @@ usb_AggSettingRxUpdate(switch (haldata->UsbRxAggMode) {case USB_RX_AGG_DMA : -usb_write8 (Adapter,REG_RXDMA_AGG_PG_TH , haldata->UsbRxAggPageCount); -usb_write8 (Adapter,REG_RXDMA_AGG_PG_TH +1 , haldata->UsbRxAggPageTimeout); +usb_write8 (Adapter,REG_RXDMA_AGG_PG_TH , + haldata->UsbRxAggPageCount); +usb_write8 (Adapter,REG_RXDMA_AGG_PG_TH +1 , + haldata->UsbRxAggPageTimeout);break ;case USB_RX_AGG_USB : -usb_write8 (Adapter,REG_USB_AGG_TH , haldata->UsbRxAggBlockCount); -usb_write8 (Adapter,REG_USB_AGG_TO , haldata->UsbRxAggBlockTimeout); +usb_write8 (Adapter,REG_USB_AGG_TH , + haldata->UsbRxAggBlockCount); +usb_write8 (Adapter,REG_USB_AGG_TO , + haldata->UsbRxAggBlockTimeout);break ;case USB_RX_AGG_MIX : -usb_write8 (Adapter,REG_RXDMA_AGG_PG_TH , haldata->UsbRxAggPageCount); -usb_write8 (Adapter,REG_RXDMA_AGG_PG_TH +1 , (haldata->UsbRxAggPageTimeout &0x1F ));/* 0x280[12:8] */ -usb_write8 (Adapter,REG_USB_AGG_TH , haldata->UsbRxAggBlockCount); -usb_write8 (Adapter,REG_USB_AGG_TO , haldata->UsbRxAggBlockTimeout); +usb_write8 (Adapter,REG_RXDMA_AGG_PG_TH , + haldata->UsbRxAggPageCount); +/* 0x280[12:8] */ +usb_write8 (Adapter,REG_RXDMA_AGG_PG_TH +1 , + (haldata->UsbRxAggPageTimeout &0x1F )); +usb_write8 (Adapter,REG_USB_AGG_TH , + haldata->UsbRxAggBlockCount); +usb_write8 (Adapter,REG_USB_AGG_TO , + haldata->UsbRxAggBlockTimeout);break ;case USB_RX_AGG_DISABLE :default : -/* TODO: */ break ; }
@@ -592,8 +622,11 @@ static void _InitBeaconParameters(struct adapter *Adapter)usb_write8 (Adapter,REG_DRVERLYINT ,DRIVER_EARLY_INT_TIME );/* 5ms */ usb_write8 (Adapter,REG_BCNDMATIM ,BCN_DMA_ATIME_INT_TIME );/* 2ms */ -/* Suggested by designer timchen. Change beacon AIFS to the largest number */ -/* beacause test chip does not contension before sending beacon. by tynli. 2009.11.03 */ +/* Suggested by designer timchen. Change beacon +* AIFS to the largest number because test chip +* does not contension before sending beacon. +* by tynli. 2009.11.03 +*/ usb_write16 (Adapter,REG_BCNTCFG ,0x660F ); haldata->RegBcnCtrlVal =usb_read8 (Adapter,REG_BCN_CTRL );
@@ -631,14 +664,17 @@ static void _InitAntenna_Selection(struct adapter *Adapter)return ;DBG_88E ("==> %s ....\n" , __func__); -usb_write32 (Adapter,REG_LEDCFG0 ,usb_read32 (Adapter,REG_LEDCFG0 ) |BIT (23 )); +usb_write32 (Adapter,REG_LEDCFG0 , +usb_read32 (Adapter,REG_LEDCFG0 ) |BIT (23 ));phy_set_bb_reg (Adapter, rFPGA0_XAB_RFParameter,BIT (13 ),0x01 ); -if (phy_query_bb_reg (Adapter, rFPGA0_XA_RFInterfaceOE,0x300 ) == Antenna_A) +if (phy_query_bb_reg (Adapter, rFPGA0_XA_RFInterfaceOE,0x300 ) == + Antenna_A) haldata->CurAntenna = Antenna_A;else haldata->CurAntenna = Antenna_B; -DBG_88E ("%s,Cur_ant:(%x)%s\n" , __func__, haldata->CurAntenna, (haldata->CurAntenna == Antenna_A) ?"Antenna_A" :"Antenna_B" ); +DBG_88E ("%s,Cur_ant:(%x)%s\n" , __func__, haldata->CurAntenna, + (haldata->CurAntenna == Antenna_A) ?"Antenna_A" :"Antenna_B" ); }/*-----------------------------------------------------------------------------
@@ -666,7 +702,8 @@ enum rt_rf_power_state RfOnOffDetect(struct adapter *adapt)DBG_88E ("pwrdown, 0x5c(BIT(7))=%02x\n" , val8); rfpowerstate = (val8 &BIT (7 )) ? rf_off : rf_on; }else {/* rf on/off */ -usb_write8 (adapt,REG_MAC_PINMUX_CFG ,usb_read8 (adapt,REG_MAC_PINMUX_CFG )&~(BIT (3 ))); +usb_write8 (adapt,REG_MAC_PINMUX_CFG , +usb_read8 (adapt,REG_MAC_PINMUX_CFG )&~(BIT (3 ))); val8 =usb_read8 (adapt,REG_GPIO_IO_SEL );DBG_88E ("GPIO_IN=%02x\n" , val8); rfpowerstate = (val8 &BIT (3 )) ? rf_on : rf_off;
@@ -708,7 +745,8 @@ static u32 rtl8188eu_hal_init(struct adapter *Adapter)HAL_INIT_PROFILE_TAG (HAL_INIT_STAGES_INIT_PW_ON ); status =rtl8188eu_InitPowerOn (Adapter);if (status == _FAIL) { -RT_TRACE (_module_hci_hal_init_c_, _drv_err_, ("Failed to init power on!\n" )); +RT_TRACE (_module_hci_hal_init_c_, _drv_err_, + ("Failed to init power on!\n" )); goto exit; }
@@ -719,9 +757,12 @@ static u32 rtl8188eu_hal_init(struct adapter *Adapter) pwrctrlpriv->rf_pwrstate = rf_off; } -/* 2010/08/09 MH We need to check if we need to turnon or off RF after detecting */ -/* HW GPIO pin. Before PHY_RFConfig8192C. */ -/* 2010/08/26 MH If Efuse does not support sective suspend then disable the function. */ +/* 2010/08/09 MH We need to check if we need to +* turnon or off RF after detecting HW GPIO pin. +* Before PHY_RFConfig8192C. 2010/08/26 MH If +* Efuse does not support sective suspend then +* disable the function. +*/ if (!pregistrypriv->wifi_spec) { txpktbuf_bndy =TX_PAGE_BOUNDARY_88E ;
@@ -750,7 +791,8 @@ static u32 rtl8188eu_hal_init(struct adapter *Adapter) Adapter->bFWReady = false;return status; }else { -RT_TRACE (_module_hci_hal_init_c_, _drv_info_, ("Initializeadapt8192CSdio(): Download Firmware Success!!\n" )); +RT_TRACE (_module_hci_hal_init_c_, _drv_info_, + ("Initializeadapt8192CSdio(): Download Firmware Success!!\n" )); Adapter->bFWReady = true; } }
@@ -774,7 +816,8 @@ static u32 rtl8188eu_hal_init(struct adapter *Adapter)HAL_INIT_PROFILE_TAG (HAL_INIT_STAGES_INIT_LLTT ); status =InitLLTTable (Adapter, txpktbuf_bndy);if (status == _FAIL) { -RT_TRACE (_module_hci_hal_init_c_, _drv_err_, ("Failed to init LLT table\n" )); +RT_TRACE (_module_hci_hal_init_c_, _drv_err_, + ("Failed to init LLT table\n" )); goto exit; }
@@ -791,8 +834,11 @@ static u32 rtl8188eu_hal_init(struct adapter *Adapter)_InitRetryFunction (Adapter);InitUsbAggregationSetting (Adapter);_InitBeaconParameters (Adapter); -/* Init CR MACTXEN, MACRXEN after setting RxFF boundary REG_TRXFF_BNDY to patch */ -/* Hw bug which Hw initials RxFF boundary size to a value which is larger than the real Rx buffer size in 88E. */ +/* Init CR MACTXEN, MACRXEN after setting RxFF +* boundary REG_TRXFF_BNDY to patch Hw bug which +* Hw initials RxFF boundary size to a value +* which is larger than the real Rx buffer size in 88E. +*/ /* Enable MACTXEN/MACRXEN block */ value16 =usb_read16 (Adapter,REG_CR ); value16 |= (MACTXEN |MACRXEN );
@@ -806,18 +852,27 @@ static u32 rtl8188eu_hal_init(struct adapter *Adapter) value8 =usb_read8 (Adapter,REG_TX_RPT_CTRL );usb_write8 (Adapter,REG_TX_RPT_CTRL , (value8 |BIT (1 ) |BIT (0 )));/* Set MAX RPT MACID */ -usb_write8 (Adapter,REG_TX_RPT_CTRL +1 ,2 );/* FOR sta mode ,0: bc/mc ,1:AP */ +/* FOR sta mode ,0: bc/mc ,1:AP */ +usb_write8 (Adapter,REG_TX_RPT_CTRL +1 ,2 );/* Tx RPT Timer. Unit: 32us */ usb_write16 (Adapter,REG_TX_RPT_TIME ,0xCdf0 );usb_write8 (Adapter,REG_EARLY_MODE_CONTROL ,0 ); -usb_write16 (Adapter,REG_PKT_VO_VI_LIFE_TIME ,0x0400 );/* unit: 256us. 256ms */ -usb_write16 (Adapter,REG_PKT_BE_BK_LIFE_TIME ,0x0400 );/* unit: 256us. 256ms */ +/* unit: 256us. 256ms */ +usb_write16 (Adapter,REG_PKT_VO_VI_LIFE_TIME ,0x0400 ); +usb_write16 (Adapter,REG_PKT_BE_BK_LIFE_TIME ,0x0400 );/* Keep RfRegChnlVal for later use. */ - haldata->RfRegChnlVal[0 ] =phy_query_rf_reg (Adapter, (enum rf_radio_path )0 ,RF_CHNLBW , bRFRegOffsetMask); - haldata->RfRegChnlVal[1 ] =phy_query_rf_reg (Adapter, (enum rf_radio_path )1 ,RF_CHNLBW , bRFRegOffsetMask); + haldata->RfRegChnlVal[0 ] =phy_query_rf_reg (Adapter, + (enum rf_radio_path )0 , +RF_CHNLBW , + bRFRegOffsetMask); + + haldata->RfRegChnlVal[1 ] =phy_query_rf_reg (Adapter, + (enum rf_radio_path )1 , +RF_CHNLBW , + bRFRegOffsetMask);HAL_INIT_PROFILE_TAG (HAL_INIT_STAGES_TURN_ON_BLOCK );_BBTurnOnBlock (Adapter);
@@ -826,18 +881,20 @@ HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_SECURITY);invalidate_cam_all (Adapter);HAL_INIT_PROFILE_TAG (HAL_INIT_STAGES_MISC11 ); -/* 2010/12/17 MH We need to set TX power according to EFUSE content at first. */ +/* 2010/12/17 MH We need to set TX power +* according to EFUSE content at first. +*/ phy_set_tx_power_level (Adapter, haldata->CurrentChannel); -/* Move by Neo for USB SS to below setp */ -/* _RfPowerSave(Adapter); */ +/* Move by Neo for USB SS to below setp +* _RfPowerSave(Adapter); +*/ _InitAntenna_Selection (Adapter); -/* */ -/* Disable BAR, suggested by Scott */ -/* 2010.04.09 add by hpfan */ -/* */ +/* Disable BAR, suggested by Scott +* 2010.04.09 add by hpfan +*/ usb_write32 (Adapter,REG_BAR_MODE_CTRL ,0x0201ffff );/* HW SEQ CTRL */
@@ -865,20 +922,22 @@ HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_HAL_DM);/* enable Tx report. */ usb_write8 (Adapter,REG_FWHW_TXQ_CTRL +1 ,0x0F ); -/* Suggested by SD1 pisa. Added by tynli. 2011.10.21. */ -usb_write8 (Adapter,REG_EARLY_MODE_CONTROL +3 ,0x01 );/* Pretx_en, for WEP/TKIP SEC */ +/* Suggested by SD1 pisa. Added by tynli. 2011.10.21. */ +/* Pretx_en, for WEP/TKIP SEC */ +usb_write8 (Adapter,REG_EARLY_MODE_CONTROL +3 ,0x01 );/* tynli_test_tx_report. */ usb_write16 (Adapter,REG_TX_RPT_TIME ,0x3DF0 );/* enable tx DMA to drop the redundate data of packet */ -usb_write16 (Adapter,REG_TXDMA_OFFSET_CHK , (usb_read16 (Adapter,REG_TXDMA_OFFSET_CHK ) |DROP_DATA_EN )); +usb_write16 (Adapter,REG_TXDMA_OFFSET_CHK , + (usb_read16 (Adapter,REG_TXDMA_OFFSET_CHK ) |DROP_DATA_EN ));HAL_INIT_PROFILE_TAG (HAL_INIT_STAGES_IQK );/* 2010/08/26 MH Merge from 8192CE. */ if (pwrctrlpriv->rf_pwrstate == rf_on) {if (haldata->odmpriv.RFCalibrateInfo.bIQKInitialized) { -rtl88eu_phy_iq_calibrate (Adapter, true); +rtl88eu_phy_iq_calibrate (Adapter, true); }else {rtl88eu_phy_iq_calibrate (Adapter, false); haldata->odmpriv.RFCalibrateInfo.bIQKInitialized = true;
@@ -897,7 +956,8 @@ HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_LCK);usb_write8 (Adapter,REG_USB_HRPWM ,0 );/* ack for xmit mgmt frames. */ -usb_write32 (Adapter,REG_FWHW_TXQ_CTRL ,usb_read32 (Adapter,REG_FWHW_TXQ_CTRL ) |BIT (12 )); +usb_write32 (Adapter,REG_FWHW_TXQ_CTRL , +usb_read32 (Adapter,REG_FWHW_TXQ_CTRL ) |BIT (12 )); exit:HAL_INIT_PROFILE_TAG (HAL_INIT_STAGES_END );
@@ -914,7 +974,8 @@ static void CardDisableRTL8188EU(struct adapter *Adapter)u8 val8;struct hal_data_8188e *haldata =GET_HAL_DATA (Adapter); -RT_TRACE (_module_hci_hal_init_c_, _drv_info_, ("CardDisableRTL8188EU\n" )); +RT_TRACE (_module_hci_hal_init_c_, _drv_info_, + ("CardDisableRTL8188EU\n" ));/* Stop Tx Report Timer. 0x4EC[Bit1]=b'0 */ val8 =usb_read8 (Adapter,REG_TX_RPT_CTRL );
@@ -964,7 +1025,8 @@ static void CardDisableRTL8188EU(struct adapter *Adapter)usb_write8 (Adapter,REG_GPIO_IO_SEL , (val8<<4 )); val8 =usb_read8 (Adapter,REG_GPIO_IO_SEL +1 );usb_write8 (Adapter,REG_GPIO_IO_SEL +1 , val8|0x0F );/* Reg0x43 */ -usb_write32 (Adapter,REG_BB_PAD_CTRL ,0x00080808 );/* set LNA ,TRSW,EX_PA Pin to output mode */ +/* set LNA ,TRSW,EX_PA Pin to output mode */ +usb_write32 (Adapter,REG_BB_PAD_CTRL ,0x00080808 ); haldata->bMacPwrCtrlOn = false; Adapter->bFWReady = false; }
@@ -988,13 +1050,15 @@ static u32 rtl8188eu_hal_deinit(struct adapter *Adapter)DBG_88E ("bkeepfwalive(%x)\n" , Adapter->pwrctrlpriv.bkeepfwalive);if (Adapter->pwrctrlpriv.bkeepfwalive) { -if ((Adapter->pwrctrlpriv.bHWPwrPindetect) && (Adapter->pwrctrlpriv.bHWPowerdown)) +if ((Adapter->pwrctrlpriv.bHWPwrPindetect) && + (Adapter->pwrctrlpriv.bHWPowerdown))rtl8192cu_hw_power_down (Adapter); }else {if (Adapter->hw_init_completed) {CardDisableRTL8188EU (Adapter); -if ((Adapter->pwrctrlpriv.bHWPwrPindetect) && (Adapter->pwrctrlpriv.bHWPowerdown)) +if ((Adapter->pwrctrlpriv.bHWPwrPindetect) && + (Adapter->pwrctrlpriv.bHWPowerdown))rtl8192cu_hw_power_down (Adapter); } }
@@ -1018,8 +1082,10 @@ static unsigned int rtl8188eu_inirp_init(struct adapter *Adapter)/* issue Rx irp to receive data */ precvbuf = (struct recv_buf *)precvpriv->precv_buf;for (i =0 ; i <NR_RECVBUFF ; i++) { -if (usb_read_port (Adapter, precvpriv->ff_hwaddr,0 , (unsigned char *)precvbuf) == false) { -RT_TRACE (_module_hci_hal_init_c_, _drv_err_, ("usb_rx_init: usb_read_port error\n" )); +if (usb_read_port (Adapter, precvpriv->ff_hwaddr,0 , + (unsigned char *)precvbuf) == false) { +RT_TRACE (_module_hci_hal_init_c_, _drv_err_, + ("usb_rx_init: usb_read_port error\n" )); status = _FAIL; goto exit; }
@@ -1030,19 +1096,20 @@ static unsigned int rtl8188eu_inirp_init(struct adapter *Adapter) exit: -RT_TRACE (_module_hci_hal_init_c_, _drv_info_, ("<=== usb_inirp_init\n" )); - - +RT_TRACE (_module_hci_hal_init_c_, _drv_info_, + ("<=== usb_inirp_init\n" ));return status; }static unsigned int rtl8188eu_inirp_deinit (struct adapter *Adapter) { -RT_TRACE (_module_hci_hal_init_c_, _drv_info_, ("\n ===> usb_rx_deinit\n" )); +RT_TRACE (_module_hci_hal_init_c_, _drv_info_, + ("\n ===> usb_rx_deinit\n" ));usb_read_port_cancel (Adapter); -RT_TRACE (_module_hci_hal_init_c_, _drv_info_, ("\n <=== usb_rx_deinit\n" )); +RT_TRACE (_module_hci_hal_init_c_, _drv_info_, + ("\n <=== usb_rx_deinit\n" ));return _SUCCESS; }
@@ -1052,32 +1119,39 @@ static unsigned int rtl8188eu_inirp_deinit(struct adapter *Adapter)/* EEPROM/EFUSE Content Parsing */ /* */ /* */ -static void Hal_EfuseParsePIDVID_8188EU (struct adapter *adapt,u8 *hwinfo,bool AutoLoadFail) +static void Hal_EfuseParsePIDVID_8188EU (struct adapter *adapt, +u8 *hwinfo,bool AutoLoadFail) {struct hal_data_8188e *haldata =GET_HAL_DATA (adapt);if (!AutoLoadFail) {/* VID, PID */ - haldata->EEPROMVID =EF2BYTE (*(__le16 *)&hwinfo[EEPROM_VID_88EU ]); - haldata->EEPROMPID =EF2BYTE (*(__le16 *)&hwinfo[EEPROM_PID_88EU ]); + haldata->EEPROMVID =EF2BYTE (*(__le16 *) & + hwinfo[EEPROM_VID_88EU ]); + haldata->EEPROMPID =EF2BYTE (*(__le16 *) & + hwinfo[EEPROM_PID_88EU ]);/* Customer ID, 0x00 and 0xff are reserved for Realtek. */ - haldata->EEPROMCustomerID = *(u8 *)&hwinfo[EEPROM_CUSTOMERID_88E ]; + haldata->EEPROMCustomerID = *(u8 *) & + hwinfo[EEPROM_CUSTOMERID_88E ]; haldata->EEPROMSubCustomerID = EEPROM_Default_SubCustomerID; }else { haldata->EEPROMVID = EEPROM_Default_VID; haldata->EEPROMPID = EEPROM_Default_PID;/* Customer ID, 0x00 and 0xff are reserved for Realtek. */ - haldata->EEPROMCustomerID = EEPROM_Default_CustomerID; + haldata->EEPROMCustomerID = EEPROM_Default_CustomerID; haldata->EEPROMSubCustomerID = EEPROM_Default_SubCustomerID; } -DBG_88E ("VID = 0x%04X, PID = 0x%04X\n" , haldata->EEPROMVID, haldata->EEPROMPID); -DBG_88E ("Customer ID: 0x%02X, SubCustomer ID: 0x%02X\n" , haldata->EEPROMCustomerID, haldata->EEPROMSubCustomerID); +DBG_88E ("VID = 0x%04X, PID = 0x%04X\n" , haldata->EEPROMVID, + haldata->EEPROMPID); +DBG_88E ("Customer ID: 0x%02X, SubCustomer ID: 0x%02X\n" , + haldata->EEPROMCustomerID, haldata->EEPROMSubCustomerID); } -static void Hal_EfuseParseMACAddr_8188EU (struct adapter *adapt,u8 *hwinfo,bool AutoLoadFail) +static void Hal_EfuseParseMACAddr_8188EU (struct adapter *adapt, +u8 *hwinfo,bool AutoLoadFail) {u16 i;u8 sMacAddr[6 ] = {0x00 ,0xE0 ,0x4C ,0x81 ,0x88 ,0x02 };
@@ -1088,34 +1162,42 @@ static void Hal_EfuseParseMACAddr_8188EU(struct adapter *adapt, u8 *hwinfo, bool eeprom->mac_addr[i] = sMacAddr[i]; }else {/* Read Permanent MAC address */ -memcpy (eeprom->mac_addr, &hwinfo[EEPROM_MAC_ADDR_88EU ],ETH_ALEN ); +memcpy (eeprom->mac_addr, &hwinfo[EEPROM_MAC_ADDR_88EU ], +ETH_ALEN ); }RT_TRACE (_module_hci_hal_init_c_, _drv_notice_, ("Hal_EfuseParseMACAddr_8188EU: Permanent Address = %pM\n" , eeprom->mac_addr)); } -static void -readAdapterInfo_8188EU ( -struct adapter *adapt - ) +static void readAdapterInfo_8188EU (struct adapter *adapt) {struct eeprom_priv *eeprom =GET_EEPROM_EFUSE_PRIV (adapt);/* parse the eeprom/efuse content */ Hal_EfuseParseIDCode88E (adapt, eeprom->efuse_eeprom_data); -Hal_EfuseParsePIDVID_8188EU (adapt, eeprom->efuse_eeprom_data, eeprom->bautoload_fail_flag); -Hal_EfuseParseMACAddr_8188EU (adapt, eeprom->efuse_eeprom_data, eeprom->bautoload_fail_flag); - -Hal_ReadPowerSavingMode88E (adapt, eeprom->efuse_eeprom_data, eeprom->bautoload_fail_flag); -Hal_ReadTxPowerInfo88E (adapt, eeprom->efuse_eeprom_data, eeprom->bautoload_fail_flag); -Hal_EfuseParseEEPROMVer88E (adapt, eeprom->efuse_eeprom_data, eeprom->bautoload_fail_flag); -rtl8188e_EfuseParseChnlPlan (adapt, eeprom->efuse_eeprom_data, eeprom->bautoload_fail_flag); -Hal_EfuseParseXtal_8188E (adapt, eeprom->efuse_eeprom_data, eeprom->bautoload_fail_flag); -Hal_EfuseParseCustomerID88E (adapt, eeprom->efuse_eeprom_data, eeprom->bautoload_fail_flag); -Hal_ReadAntennaDiversity88E (adapt, eeprom->efuse_eeprom_data, eeprom->bautoload_fail_flag); -Hal_EfuseParseBoardType88E (adapt, eeprom->efuse_eeprom_data, eeprom->bautoload_fail_flag); -Hal_ReadThermalMeter_88E (adapt, eeprom->efuse_eeprom_data, eeprom->bautoload_fail_flag); +Hal_EfuseParsePIDVID_8188EU (adapt, eeprom->efuse_eeprom_data, + eeprom->bautoload_fail_flag); +Hal_EfuseParseMACAddr_8188EU (adapt, eeprom->efuse_eeprom_data, + eeprom->bautoload_fail_flag); +Hal_ReadPowerSavingMode88E (adapt, eeprom->efuse_eeprom_data, + eeprom->bautoload_fail_flag); +Hal_ReadTxPowerInfo88E (adapt, eeprom->efuse_eeprom_data, + eeprom->bautoload_fail_flag); +Hal_EfuseParseEEPROMVer88E (adapt, eeprom->efuse_eeprom_data, + eeprom->bautoload_fail_flag); +rtl8188e_EfuseParseChnlPlan (adapt, eeprom->efuse_eeprom_data, + eeprom->bautoload_fail_flag); +Hal_EfuseParseXtal_8188E (adapt, eeprom->efuse_eeprom_data, + eeprom->bautoload_fail_flag); +Hal_EfuseParseCustomerID88E (adapt, eeprom->efuse_eeprom_data, + eeprom->bautoload_fail_flag); +Hal_ReadAntennaDiversity88E (adapt, eeprom->efuse_eeprom_data, + eeprom->bautoload_fail_flag); +Hal_EfuseParseBoardType88E (adapt, eeprom->efuse_eeprom_data, + eeprom->bautoload_fail_flag); +Hal_ReadThermalMeter_88E (adapt, eeprom->efuse_eeprom_data, + eeprom->bautoload_fail_flag); }
@@ -1128,10 +1210,11 @@ static void _ReadPROMContent(/* check system boot selection */ eeValue =usb_read8 (Adapter,REG_9346CR ); - eeprom->EepromOrEfuse = (eeValue &BOOT_FROM_EEPROM ) ? true : false; - eeprom->bautoload_fail_flag = (eeValue &EEPROM_EN ) ? false : true; + eeprom->EepromOrEfuse = (eeValue &BOOT_FROM_EEPROM ) ? true : false; + eeprom->bautoload_fail_flag = (eeValue &EEPROM_EN ) ? false : true; -DBG_88E ("Boot from %s, Autoload %s !\n" , (eeprom->EepromOrEfuse ?"EEPROM" :"EFUSE" ), +DBG_88E ("Boot from %s, Autoload %s !\n" , + (eeprom->EepromOrEfuse ?"EEPROM" :"EFUSE" ), (eeprom->bautoload_fail_flag ?"Fail" :"OK" ));Hal_InitPGData88E (Adapter);
@@ -1170,11 +1253,13 @@ static void ResumeTxBeacon(struct adapter *adapt)/* 2010.03.01. Marked by tynli. No need to call workitem beacause we record the value */ /* which should be read from register to a global variable. */ -usb_write8 (adapt,REG_FWHW_TXQ_CTRL +2 , (haldata->RegFwHwTxQCtrl) |BIT (6 )); +usb_write8 (adapt,REG_FWHW_TXQ_CTRL +2 , + (haldata->RegFwHwTxQCtrl) |BIT (6 )); haldata->RegFwHwTxQCtrl |=BIT (6 );usb_write8 (adapt,REG_TBTT_PROHIBIT +1 ,0xff ); haldata->RegReg542 |=BIT (0 ); -usb_write8 (adapt,REG_TBTT_PROHIBIT +2 , haldata->RegReg542); +usb_write8 (adapt,REG_TBTT_PROHIBIT +2 , + haldata->RegReg542); }static void StopTxBeacon (struct adapter *adapt)
@@ -1184,7 +1269,8 @@ static void StopTxBeacon(struct adapter *adapt)/* 2010.03.01. Marked by tynli. No need to call workitem beacause we record the value */ /* which should be read from register to a global variable. */ -usb_write8 (adapt,REG_FWHW_TXQ_CTRL +2 , (haldata->RegFwHwTxQCtrl) & (~BIT (6 ))); +usb_write8 (adapt,REG_FWHW_TXQ_CTRL +2 , + (haldata->RegFwHwTxQCtrl) & (~BIT (6 ))); haldata->RegFwHwTxQCtrl &= (~BIT (6 ));usb_write8 (adapt,REG_TBTT_PROHIBIT +1 ,0x64 ); haldata->RegReg542 &= ~(BIT (0 ));
@@ -1199,7 +1285,8 @@ static void hw_var_set_opmode(struct adapter *Adapter, u8 variable, u8 *val)u8 mode = *((u8 *)val);/* disable Port0 TSF update */ -usb_write8 (Adapter,REG_BCN_CTRL ,usb_read8 (Adapter,REG_BCN_CTRL ) |BIT (4 )); +usb_write8 (Adapter,REG_BCN_CTRL , +usb_read8 (Adapter,REG_BCN_CTRL ) |BIT (4 ));/* set net_type */ val8 =usb_read8 (Adapter,MSR )&0x0c ;
@@ -1239,14 +1326,17 @@ static void hw_var_set_opmode(struct adapter *Adapter, u8 variable, u8 *val)usb_write8 (Adapter,REG_DUAL_TSF_RST ,BIT (0 ));/* BIT3 - If set 0, hw will clr bcnq when tx becon ok/fail or port 0 */ -usb_write8 (Adapter,REG_MBID_NUM ,usb_read8 (Adapter,REG_MBID_NUM ) |BIT (3 ) |BIT (4 )); +usb_write8 (Adapter,REG_MBID_NUM , +usb_read8 (Adapter,REG_MBID_NUM ) |BIT (3 ) |BIT (4 ));/* enable BCN0 Function for if1 */ /* don't enable update TSF0 for if1 (due to TSF update when beacon/probe rsp are received) */ -usb_write8 (Adapter,REG_BCN_CTRL , (DIS_TSF_UDT0_NORMAL_CHIP |EN_BCN_FUNCTION |BIT (1 ))); +usb_write8 (Adapter,REG_BCN_CTRL , + (DIS_TSF_UDT0_NORMAL_CHIP |EN_BCN_FUNCTION |BIT (1 )));/* dis BCN1 ATIM WND if if2 is station */ -usb_write8 (Adapter,REG_BCN_CTRL_1 ,usb_read8 (Adapter,REG_BCN_CTRL_1 ) |BIT (0 )); +usb_write8 (Adapter,REG_BCN_CTRL_1 , +usb_read8 (Adapter,REG_BCN_CTRL_1 ) |BIT (0 )); } }
@@ -1279,9 +1369,12 @@ static void hw_var_set_bcn_func(struct adapter *Adapter, u8 variable, u8 *val) bcn_ctrl_reg =REG_BCN_CTRL ;if (*((u8 *)val)) -usb_write8 (Adapter, bcn_ctrl_reg, (EN_BCN_FUNCTION |EN_TXBCN_RPT )); +usb_write8 (Adapter, bcn_ctrl_reg, + (EN_BCN_FUNCTION |EN_TXBCN_RPT ));else -usb_write8 (Adapter, bcn_ctrl_reg,usb_read8 (Adapter, bcn_ctrl_reg)&(~(EN_BCN_FUNCTION |EN_TXBCN_RPT ))); +usb_write8 (Adapter, bcn_ctrl_reg, +usb_read8 (Adapter, bcn_ctrl_reg) & + (~(EN_BCN_FUNCTION |EN_TXBCN_RPT ))); }static void SetHwReg8188EU (struct adapter *Adapter,u8 variable,u8 *val)
@@ -1342,7 +1435,8 @@ static void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val)/* Set RRSR rate table. */ usb_write8 (Adapter,REG_RRSR , BrateCfg &0xff );usb_write8 (Adapter,REG_RRSR +1 , (BrateCfg >>8 ) &0xff ); -usb_write8 (Adapter,REG_RRSR +2 ,usb_read8 (Adapter,REG_RRSR +2 )&0xf0 ); +usb_write8 (Adapter,REG_RRSR +2 , +usb_read8 (Adapter,REG_RRSR +2 )&0xf0 );/* Set RTS initial rate */ while (BrateCfg >0x1 ) {
@@ -1359,40 +1453,45 @@ static void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val)case HW_VAR_BCN_FUNC :hw_var_set_bcn_func (Adapter, variable, val);break ; -case HW_VAR_CORRECT_TSF : - { -u64 tsf; -struct mlme_ext_priv *pmlmeext = &Adapter->mlmeextpriv; -struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); +case HW_VAR_CORRECT_TSF : { +u64 tsf; +struct mlme_ext_priv *pmlmeext = &Adapter->mlmeextpriv; +struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info; - tsf = pmlmeext->TSFValue -rtw_modular64 (pmlmeext->TSFValue, (pmlmeinfo->bcn_interval*1024 )) -1024 ;/* us */ + tsf = pmlmeext->TSFValue - +rtw_modular64 (pmlmeext->TSFValue, + (pmlmeinfo->bcn_interval*1024 )) -1024 ;/* us */ -if (((pmlmeinfo->state&0x03 ) ==WIFI_FW_ADHOC_STATE ) || ((pmlmeinfo->state&0x03 ) ==WIFI_FW_AP_STATE )) -StopTxBeacon (Adapter); +if (((pmlmeinfo->state&0x03 ) ==WIFI_FW_ADHOC_STATE ) || + ((pmlmeinfo->state&0x03 ) ==WIFI_FW_AP_STATE )) +StopTxBeacon (Adapter); -/* disable related TSF function */ -usb_write8 (Adapter,REG_BCN_CTRL ,usb_read8 (Adapter,REG_BCN_CTRL )&(~BIT (3 ))); +/* disable related TSF function */ +usb_write8 (Adapter,REG_BCN_CTRL , +usb_read8 (Adapter,REG_BCN_CTRL )&(~BIT (3 ))); -usb_write32 (Adapter,REG_TSFTR , tsf); -usb_write32 (Adapter,REG_TSFTR +4 , tsf>>32 ); +usb_write32 (Adapter,REG_TSFTR , tsf); +usb_write32 (Adapter,REG_TSFTR +4 , tsf>>32 ); -/* enable related TSF function */ -usb_write8 (Adapter,REG_BCN_CTRL ,usb_read8 (Adapter,REG_BCN_CTRL ) |BIT (3 )); +/* enable related TSF function */ +usb_write8 (Adapter,REG_BCN_CTRL , +usb_read8 (Adapter,REG_BCN_CTRL ) |BIT (3 )); -if (((pmlmeinfo->state&0x03 ) ==WIFI_FW_ADHOC_STATE ) || ((pmlmeinfo->state&0x03 ) ==WIFI_FW_AP_STATE )) -ResumeTxBeacon (Adapter); +if (((pmlmeinfo->state&0x03 ) ==WIFI_FW_ADHOC_STATE ) || + ((pmlmeinfo->state&0x03 ) ==WIFI_FW_AP_STATE )) +ResumeTxBeacon (Adapter); }break ;case HW_VAR_CHECK_BSSID :if (*((u8 *)val)) { -usb_write32 (Adapter,REG_RCR ,usb_read32 (Adapter,REG_RCR )|RCR_CBSSID_DATA |RCR_CBSSID_BCN ); +usb_write32 (Adapter,REG_RCR , +usb_read32 (Adapter,REG_RCR ) | +RCR_CBSSID_DATA |RCR_CBSSID_BCN ); }else {u32 val32; val32 =usb_read32 (Adapter,REG_RCR ); - val32 &= ~(RCR_CBSSID_DATA |RCR_CBSSID_BCN ); -usb_write32 (Adapter,REG_RCR , val32); }break ;
@@ -1405,22 +1504,25 @@ static void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val)usb_write8 (Adapter,REG_DUAL_TSF_RST , (BIT (0 ) |BIT (1 )));/* disable update TSF */ -usb_write8 (Adapter,REG_BCN_CTRL ,usb_read8 (Adapter,REG_BCN_CTRL ) |BIT (4 )); +usb_write8 (Adapter,REG_BCN_CTRL , +usb_read8 (Adapter,REG_BCN_CTRL ) |BIT (4 ));break ;case HW_VAR_MLME_SITESURVEY :if (*((u8 *)val)) {/* under sitesurvey */ /* config RCR to receive different BSSID & not to receive data frame */ u32 v =usb_read32 (Adapter,REG_RCR ); + v &= ~(RCR_CBSSID_BCN );usb_write32 (Adapter,REG_RCR , v);/* reject all data frame */ usb_write16 (Adapter,REG_RXFLTMAP2 ,0x00 );/* disable update TSF */ -usb_write8 (Adapter,REG_BCN_CTRL ,usb_read8 (Adapter,REG_BCN_CTRL ) |BIT (4 )); +usb_write8 (Adapter,REG_BCN_CTRL , +usb_read8 (Adapter,REG_BCN_CTRL ) |BIT (4 )); }else {/* sitesurvey done */ -struct mlme_ext_priv *pmlmeext = &Adapter->mlmeextpriv; -struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); +struct mlme_ext_priv *pmlmeext = &Adapter->mlmeextpriv; +struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info;if ((is_client_associated_to_ap (Adapter)) || ((pmlmeinfo->state&0x03 ) ==WIFI_FW_ADHOC_STATE )) {
@@ -1428,21 +1530,32 @@ static void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val)usb_write16 (Adapter,REG_RXFLTMAP2 ,0xFFFF );/* enable update TSF */ -usb_write8 (Adapter,REG_BCN_CTRL ,usb_read8 (Adapter,REG_BCN_CTRL )&(~BIT (4 ))); - }else if ((pmlmeinfo->state&0x03 ) ==WIFI_FW_AP_STATE ) { +usb_write8 (Adapter,REG_BCN_CTRL , +usb_read8 (Adapter,REG_BCN_CTRL ) & + (~BIT (4 ))); + + }else if (pmlmeinfo->state&0x03 ==WIFI_FW_AP_STATE ) {usb_write16 (Adapter,REG_RXFLTMAP2 ,0xFFFF );/* enable update TSF */ -usb_write8 (Adapter,REG_BCN_CTRL ,usb_read8 (Adapter,REG_BCN_CTRL )&(~BIT (4 ))); +usb_write8 (Adapter,REG_BCN_CTRL , +usb_read8 (Adapter,REG_BCN_CTRL ) & + (~BIT (4 ))); }if ((pmlmeinfo->state&0x03 ) ==WIFI_FW_AP_STATE ) { -usb_write32 (Adapter,REG_RCR ,usb_read32 (Adapter,REG_RCR )|RCR_CBSSID_BCN ); +usb_write32 (Adapter,REG_RCR , +usb_read32 (Adapter,REG_RCR ) | +RCR_CBSSID_BCN ); }else {if (Adapter->in_cta_test) {u32 v =usb_read32 (Adapter,REG_RCR ); - v &= ~(RCR_CBSSID_DATA |RCR_CBSSID_BCN );/* RCR_ADF */ +/* RCR_ADF */ + v &= ~(RCR_CBSSID_DATA | +RCR_CBSSID_BCN );usb_write32 (Adapter,REG_RCR , v); }else { -usb_write32 (Adapter,REG_RCR ,usb_read32 (Adapter,REG_RCR )|RCR_CBSSID_BCN ); +usb_write32 (Adapter,REG_RCR , +usb_read32 (Adapter,REG_RCR ) + |RCR_CBSSID_BCN ); } } }
@@ -1454,19 +1567,27 @@ static void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val)struct mlme_priv *pmlmepriv = &Adapter->mlmepriv;if (type ==0 ) {/* prepare to join */ -/* enable to rx data frame.Accept all data frame */ +/* enable to rx data frame. +* Accept all data frame */ usb_write16 (Adapter,REG_RXFLTMAP2 ,0xFFFF );if (Adapter->in_cta_test) {u32 v =usb_read32 (Adapter,REG_RCR ); - v &= ~(RCR_CBSSID_DATA |RCR_CBSSID_BCN );/* RCR_ADF */ + + v &= ~(RCR_CBSSID_DATA | +RCR_CBSSID_BCN );/* RCR_ADF */ usb_write32 (Adapter,REG_RCR , v); }else { -usb_write32 (Adapter,REG_RCR ,usb_read32 (Adapter,REG_RCR )|RCR_CBSSID_DATA |RCR_CBSSID_BCN ); +usb_write32 (Adapter,REG_RCR , +usb_read32 (Adapter,REG_RCR ) + |RCR_CBSSID_DATA + |RCR_CBSSID_BCN ); } -if (check_fwstate (pmlmepriv,WIFI_STATION_STATE )) - RetryLimit = (haldata->CustomerID ==RT_CID_CCX ) ?7 :48 ; +if (check_fwstate (pmlmepriv, +WIFI_STATION_STATE )) + RetryLimit = (haldata->CustomerID == +RT_CID_CCX ) ?7 :48 ;else /* Ad-hoc Mode */ RetryLimit =0x7 ; }else if (type ==1 ) {
@@ -1475,40 +1596,44 @@ static void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val) }else if (type ==2 ) {/* sta add event call back */ /* enable update TSF */ -usb_write8 (Adapter,REG_BCN_CTRL ,usb_read8 (Adapter,REG_BCN_CTRL )&(~BIT (4 ))); +usb_write8 (Adapter,REG_BCN_CTRL , +usb_read8 (Adapter,REG_BCN_CTRL ) & + (~BIT (4 ))); -if (check_fwstate (pmlmepriv,WIFI_ADHOC_STATE |WIFI_ADHOC_MASTER_STATE )) +if (check_fwstate (pmlmepriv,WIFI_ADHOC_STATE | +WIFI_ADHOC_MASTER_STATE )) RetryLimit =0x7 ; } -usb_write16 (Adapter,REG_RL , RetryLimit <<RETRY_LIMIT_SHORT_SHIFT | RetryLimit <<RETRY_LIMIT_LONG_SHIFT ); +usb_write16 (Adapter,REG_RL , + RetryLimit <<RETRY_LIMIT_SHORT_SHIFT | + RetryLimit <<RETRY_LIMIT_LONG_SHIFT ); }break ;case HW_VAR_BEACON_INTERVAL :usb_write16 (Adapter,REG_BCN_INTERVAL , *((u16 *)val));break ;case HW_VAR_SLOT_TIME : - { -u8 u1bAIFS, aSifsTime; -struct mlme_ext_priv *pmlmeext = &Adapter->mlmeextpriv; -struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); +u8 u1bAIFS, aSifsTime; +struct mlme_ext_priv *pmlmeext = &Adapter->mlmeextpriv; +struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info; -usb_write8 (Adapter,REG_SLOT , val[0 ]); +usb_write8 (Adapter,REG_SLOT , val[0 ]); -if (pmlmeinfo->WMM_enable ==0 ) { -if (pmlmeext->cur_wireless_mode ==WIRELESS_11B ) - aSifsTime =10 ; -else - aSifsTime =16 ; +if (pmlmeinfo->WMM_enable ==0 ) { +if (pmlmeext->cur_wireless_mode ==WIRELESS_11B ) + aSifsTime =10 ; +else + aSifsTime =16 ; - u1bAIFS = aSifsTime + (2 * pmlmeinfo->slotTime); + u1bAIFS = aSifsTime + (2 * pmlmeinfo->slotTime); -/* <Roger_EXP> Temporary removed, 2008.06.20. */ -usb_write8 (Adapter,REG_EDCA_VO_PARAM , u1bAIFS); -usb_write8 (Adapter,REG_EDCA_VI_PARAM , u1bAIFS); -usb_write8 (Adapter,REG_EDCA_BE_PARAM , u1bAIFS); -usb_write8 (Adapter,REG_EDCA_BK_PARAM , u1bAIFS); - } +/* <Roger_EXP> Temporary removed, 2008.06.20. */ +usb_write8 (Adapter,REG_EDCA_VO_PARAM , u1bAIFS); +usb_write8 (Adapter,REG_EDCA_VI_PARAM , u1bAIFS); +usb_write8 (Adapter,REG_EDCA_BE_PARAM , u1bAIFS); +usb_write8 (Adapter,REG_EDCA_BK_PARAM , u1bAIFS); } +break ;case HW_VAR_RESP_SIFS :/* RESP_SIFS for CCK */
@@ -1523,7 +1648,7 @@ static void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val)u8 regTmp;u8 bShortPreamble = *((bool *)val);/* Joseph marked out for Netgear 3500 TKIP channel 7 issue.(Temporarily) */ - regTmp = (haldata->nCur40MhzPrimeSC)<<5 ; + regTmp = (haldata->nCur40MhzPrimeSC) <<5 ;if (bShortPreamble) regTmp |=0x80 ;
@@ -1545,7 +1670,7 @@ static void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val)case HW_VAR_DM_FUNC_SET :if (*((u32 *)val) ==DYNAMIC_ALL_FUNC_ENABLE ) { pdmpriv->DMFlag = pdmpriv->InitDMFlag; - podmpriv->SupportAbility = pdmpriv->InitODMFlag; + podmpriv->SupportAbility = pdmpriv->InitODMFlag; }else { podmpriv->SupportAbility |= *((u32 *)val); }
@@ -1564,7 +1689,8 @@ static void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val)for (i =0 ; i <CAM_CONTENT_COUNT ; i++) {/* filled id in CAM config 2 byte */ if (i ==0 ) - ulContent |= (ucIndex &0x03 ) | ((u16)(ulEncAlgo)<<2 ); + ulContent |= (ucIndex &0x03 ) | + ((u16)(ulEncAlgo) <<2 );else ulContent =0 ;/* polling bit, and No Write enable, and address */
@@ -1583,6 +1709,7 @@ static void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val) {u32 cmd;u32 *cam_val = (u32 *)val; +usb_write32 (Adapter,WCAMI , cam_val[0 ]); cmd =CAM_POLLINIG |CAM_WRITE | cam_val[1 ];
@@ -1636,7 +1763,8 @@ static void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val) MinSpacingToSet = *((u8 *)val);if (MinSpacingToSet <=7 ) { -switch (Adapter->securitypriv.dot11PrivacyAlgrthm) { +switch (Adapter-> + securitypriv.dot11PrivacyAlgrthm) {case _NO_PRIVACY_:case _AES_: SecMinSpace =0 ;
@@ -1653,7 +1781,10 @@ static void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val) }if (MinSpacingToSet < SecMinSpace) MinSpacingToSet = SecMinSpace; -usb_write8 (Adapter,REG_AMPDU_MIN_SPACE , (usb_read8 (Adapter,REG_AMPDU_MIN_SPACE ) &0xf8 ) | MinSpacingToSet); +usb_write8 (Adapter,REG_AMPDU_MIN_SPACE , ( +usb_read8 (Adapter, +REG_AMPDU_MIN_SPACE ) + &0xf8 ) | MinSpacingToSet); } }break ;
@@ -1672,13 +1803,21 @@ static void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val) FactorToSet =0xf ;for (index =0 ; index <4 ; index++) { -if ((pRegToSet[index] &0xf0 ) > (FactorToSet<<4 )) - pRegToSet[index] = (pRegToSet[index] &0x0f ) | (FactorToSet<<4 ); - -if ((pRegToSet[index] &0x0f ) > FactorToSet) - pRegToSet[index] = (pRegToSet[index] &0xf0 ) | (FactorToSet); - -usb_write8 (Adapter, (REG_AGGLEN_LMT +index), pRegToSet[index]); +if ((pRegToSet[index] &0xf0 ) > + (FactorToSet <<4 )) + pRegToSet[index] = + (pRegToSet[index] &0x0f ) | + (FactorToSet<<4 ); + +if ((pRegToSet[index] &0x0f ) > + FactorToSet) + pRegToSet[index] = + (pRegToSet[index] &0xf0 ) | + (FactorToSet); + +usb_write8 (Adapter, + (REG_AGGLEN_LMT +index), + pRegToSet[index]); } } }
@@ -1686,6 +1825,7 @@ static void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val)case HW_VAR_RXDMA_AGG_PG_TH : {u8 threshold = *((u8 *)val); +if (threshold ==0 ) threshold = haldata->UsbRxAggPageCount;usb_write8 (Adapter,REG_RXDMA_AGG_PG_TH , threshold);
@@ -1707,6 +1847,7 @@ static void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val)case HW_VAR_H2C_FW_JOINBSSRPT : {u8 mstatus = (*(u8 *)val); +rtl8188e_set_FwJoinBssReport_cmd (Adapter, mstatus); }break ;
@@ -1716,9 +1857,11 @@ static void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val)u32 rx_gain = ((u32 *)(val))[0 ];if (rx_gain ==0xff ) {/* restore rx gain */ -ODM_Write_DIG (podmpriv, pDigTable->BackupIGValue); +ODM_Write_DIG (podmpriv, + pDigTable->BackupIGValue); }else { - pDigTable->BackupIGValue = pDigTable->CurIGValue; + pDigTable->BackupIGValue = pDigTable-> + CurIGValue;ODM_Write_DIG (podmpriv, rx_gain); } }
@@ -1729,6 +1872,7 @@ static void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val)case HW_VAR_RPT_TIMER_SETTING : {u16 min_rpt_time = (*(u16 *)val); +ODM_RA_Set_TxRPT_Time (podmpriv, min_rpt_time); }break ;
@@ -1738,8 +1882,10 @@ static void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val)u8 Ant;/* switch antenna to Optimum_antenna */ if (haldata->CurAntenna != Optimum_antenna) { - Ant = (Optimum_antenna ==2 ) ?MAIN_ANT :AUX_ANT ; -rtl88eu_dm_update_rx_idle_ant (&haldata->odmpriv, Ant); + Ant = (Optimum_antenna ==2 ) ? +MAIN_ANT :AUX_ANT ; +rtl88eu_dm_update_rx_idle_ant (&haldata->odmpriv, + Ant); haldata->CurAntenna = Optimum_antenna; }
@@ -1757,13 +1903,17 @@ static void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val)usb_write8 (Adapter,REG_TXPAUSE ,0xff );/* keep sn */ - Adapter->xmitpriv.nqos_ssn =usb_read16 (Adapter,REG_NQOS_SEQ ); + Adapter->xmitpriv.nqos_ssn =usb_read16 (Adapter, +REG_NQOS_SEQ );if (!pwrpriv->bkeepfwalive) {/* RX DMA stop */ -usb_write32 (Adapter,REG_RXPKT_NUM , (usb_read32 (Adapter,REG_RXPKT_NUM )|RW_RELEASE_EN )); +usb_write32 (Adapter,REG_RXPKT_NUM , + (usb_read32 (Adapter,REG_RXPKT_NUM ) | +RW_RELEASE_EN ));do { -if (!(usb_read32 (Adapter,REG_RXPKT_NUM )&RXDMA_IDLE )) +if (!(usb_read32 (Adapter,REG_RXPKT_NUM ) + &RXDMA_IDLE ))break ; }while (trycnt--);if (trycnt ==0 )
@@ -1780,21 +1930,25 @@ static void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val)break ;case HW_VAR_APFM_ON_MAC : haldata->bMacPwrCtrlOn = *val; -DBG_88E ("%s: bMacPwrCtrlOn=%d\n" , __func__, haldata->bMacPwrCtrlOn); +DBG_88E ("%s: bMacPwrCtrlOn=%d\n" , __func__, + haldata->bMacPwrCtrlOn);break ;case HW_VAR_TX_RPT_MAX_MACID : {u8 maxMacid = *val; -DBG_88E ("### MacID(%d),Set Max Tx RPT MID(%d)\n" , maxMacid, maxMacid+1 ); + +DBG_88E ("### MacID(%d),Set Max Tx RPT MID(%d)\n" , + maxMacid, maxMacid+1 );usb_write8 (Adapter,REG_TX_RPT_CTRL +1 , maxMacid+1 ); }break ;case HW_VAR_H2C_MEDIA_STATUS_RPT : -rtl8188e_set_FwMediaStatus_cmd (Adapter , (*(__le16 *)val)); +rtl8188e_set_FwMediaStatus_cmd (Adapter, (*(__le16 *)val));break ;case HW_VAR_BCN_VALID :/* BCN_VALID, BIT16 of REG_TDECTRL = BIT0 of REG_TDECTRL+2, write 1 to clear, Clear by sw */ -usb_write8 (Adapter,REG_TDECTRL +2 ,usb_read8 (Adapter,REG_TDECTRL +2 ) |BIT (0 )); +usb_write8 (Adapter,REG_TDECTRL +2 , +usb_read8 (Adapter,REG_TDECTRL +2 ) |BIT (0 ));break ;default :break ;
@@ -1814,7 +1968,8 @@ static void GetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val)break ;case HW_VAR_BCN_VALID :/* BCN_VALID, BIT16 of REG_TDECTRL = BIT0 of REG_TDECTRL+2 */ - val[0 ] = (BIT (0 ) &usb_read8 (Adapter,REG_TDECTRL +2 )) ? true : false; + val[0 ] = (BIT (0 ) & +usb_read8 (Adapter,REG_TDECTRL +2 )) ? true : false;break ;case HW_VAR_DM_FLAG : val[0 ] = podmpriv->SupportAbility;
@@ -1831,6 +1986,7 @@ static void GetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val) val[0 ] = true; }else {u32 valRCR; + valRCR =usb_read32 (Adapter,REG_RCR ); valRCR &=0x00070000 ;if (valRCR)
@@ -1850,7 +2006,9 @@ static void GetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val) *val = haldata->bMacPwrCtrlOn;break ;case HW_VAR_CHK_HI_QUEUE_EMPTY : - *val = ((usb_read32 (Adapter,REG_HGQ_INFORMATION )&0x0000ff00 ) ==0 ) ? true : false; + *val = ((usb_read32 (Adapter,REG_HGQ_INFORMATION ) & +0x0000ff00 ) ==0 ) ? + true : false;break ;default :break ;
@@ -1878,9 +2036,13 @@ GetHalDefVar8188EUsb(struct mlme_priv *pmlmepriv = &Adapter->mlmepriv;struct sta_priv *pstapriv = &Adapter->stapriv;struct sta_info *psta; - psta =rtw_get_stainfo (pstapriv, pmlmepriv->cur_network.network.MacAddress); + + psta =rtw_get_stainfo (pstapriv, pmlmepriv-> + cur_network.network.MacAddress); +if (psta) - *((int *)pValue) = psta->rssi_stat.UndecoratedSmoothedPWDB; + *((int *)pValue) = psta-> + rssi_stat.UndecoratedSmoothedPWDB; }break ;case HAL_DEF_IS_SUPPORT_ANT_DIV :
@@ -1902,22 +2064,19 @@ GetHalDefVar8188EUsb( *((u32 *)pValue) = haldata->odmpriv.SupportAbility;break ;case HAL_DEF_RA_DECISION_RATE : - { -u8 MacID = *((u8 *)pValue); - *((u8 *)pValue) =ODM_RA_GetDecisionRate_8188E (&(haldata->odmpriv), MacID); - } +u8 MacID = *((u8 *)pValue); + *((u8 *)pValue) =ODM_RA_GetDecisionRate_8188E (&haldata-> + odmpriv, MacID);break ;case HAL_DEF_RA_SGI : - { -u8 MacID = *((u8 *)pValue); - *((u8 *)pValue) =ODM_RA_GetShortGI_8188E (&(haldata->odmpriv), MacID); - } +u8 MacID = *((u8 *)pValue); + *((u8 *)pValue) =ODM_RA_GetShortGI_8188E (&haldata->odmpriv, + MacID);break ;case HAL_DEF_PT_PWR_STATUS : - { -u8 MacID = *((u8 *)pValue); - *((u8 *)pValue) =ODM_RA_GetHwPwrStatus_8188E (&(haldata->odmpriv), MacID); - } +u8 MacID = *((u8 *)pValue); + *((u8 *)pValue) =ODM_RA_GetHwPwrStatus_8188E (&haldata->odmpriv, + MacID);break ;case HW_VAR_MAX_RX_AMPDU_FACTOR : *((u32 *)pValue) =MAX_AMPDU_FACTOR_64K ;
@@ -1925,22 +2084,30 @@ GetHalDefVar8188EUsb(case HW_DEF_RA_INFO_DUMP : {u8 entry_id = *((u8 *)pValue); +if (check_fwstate (&Adapter->mlmepriv, _FW_LINKED)) {DBG_88E ("============ RA status check ===================\n" );DBG_88E ("Mac_id:%d , RateID = %d, RAUseRate = 0x%08x, RateSGI = %d, DecisionRate = 0x%02x ,PTStage = %d\n" , entry_id, - haldata->odmpriv.RAInfo[entry_id].RateID, - haldata->odmpriv.RAInfo[entry_id].RAUseRate, - haldata->odmpriv.RAInfo[entry_id].RateSGI, - haldata->odmpriv.RAInfo[entry_id].DecisionRate, - haldata->odmpriv.RAInfo[entry_id].PTStage); + haldata->odmpriv.RAInfo[entry_id] + .RateID, + haldata->odmpriv.RAInfo[entry_id] + .RAUseRate, + haldata->odmpriv.RAInfo[entry_id] + .RateSGI, + haldata->odmpriv.RAInfo[entry_id] + .DecisionRate, + haldata->odmpriv.RAInfo[entry_id] + .PTStage); } }break ;case HW_DEF_ODM_DBG_FLAG : {struct odm_dm_struct *dm_ocm = &(haldata->odmpriv); -pr_info ("dm_ocm->DebugComponents = 0x%llx\n" , dm_ocm->DebugComponents); + +pr_info ("dm_ocm->DebugComponents = 0x%llx\n" , + dm_ocm->DebugComponents); }break ;case HAL_DEF_DBG_DUMP_RXPKT :
@@ -1957,7 +2124,8 @@ GetHalDefVar8188EUsb(return bResult; } -static void UpdateHalRAMask8188EUsb (struct adapter *adapt,u32 mac_id,u8 rssi_level) +static void UpdateHalRAMask8188EUsb (struct adapter *adapt, +u32 mac_id,u8 rssi_level) {u8 init_rate =0 ;u8 networkType, raid;
@@ -1977,34 +2145,49 @@ static void UpdateHalRAMask8188EUsb(struct adapter *adapt, u32 mac_id, u8 rssi_lreturn ;switch (mac_id) {case 0 :/* for infra mode */ - supportRateNum =rtw_get_rateset_len (cur_network->SupportedRates); - networkType =judge_network_type (adapt, cur_network->SupportedRates, supportRateNum) &0xf ; + supportRateNum =rtw_get_rateset_len (cur_network-> + SupportedRates); + networkType =judge_network_type (adapt, + cur_network->SupportedRates, + supportRateNum) &0xf ; raid =networktype_to_raid (networkType); - mask =update_supported_rate (cur_network->SupportedRates, supportRateNum); - mask |= (pmlmeinfo->HT_enable) ?update_MSC_rate (&(pmlmeinfo->HT_caps)) :0 ; + mask =update_supported_rate (cur_network->SupportedRates, + supportRateNum); + mask |= (pmlmeinfo->HT_enable) ? +update_MSC_rate (&pmlmeinfo->HT_caps) :0 ;if (support_short_GI (adapt, &(pmlmeinfo->HT_caps))) shortGIrate = true;break ;case 1 :/* for broadcast/multicast */ - supportRateNum =rtw_get_rateset_len (pmlmeinfo->FW_sta_info[mac_id].SupportedRates); + supportRateNum =rtw_get_rateset_len (pmlmeinfo-> + FW_sta_info[mac_id] + .SupportedRates);if (pmlmeext->cur_wireless_mode &WIRELESS_11B ) networkType =WIRELESS_11B ;else networkType =WIRELESS_11G ; raid =networktype_to_raid (networkType); - mask =update_basic_rate (cur_network->SupportedRates, supportRateNum); + mask =update_basic_rate (cur_network->SupportedRates, + supportRateNum);break ;default :/* for each sta in IBSS */ - supportRateNum =rtw_get_rateset_len (pmlmeinfo->FW_sta_info[mac_id].SupportedRates); - networkType =judge_network_type (adapt, pmlmeinfo->FW_sta_info[mac_id].SupportedRates, supportRateNum) &0xf ; + supportRateNum =rtw_get_rateset_len (pmlmeinfo-> + FW_sta_info[mac_id] + .SupportedRates); + networkType =judge_network_type (adapt, pmlmeinfo-> + FW_sta_info[mac_id] + .SupportedRates, + supportRateNum) &0xf ; raid =networktype_to_raid (networkType); - mask =update_supported_rate (cur_network->SupportedRates, supportRateNum); + mask =update_supported_rate (cur_network->SupportedRates, + supportRateNum);/* todo: support HT in IBSS */ break ; } - rate_bitmap =ODM_Get_Rate_Bitmap (&haldata->odmpriv, mac_id, mask, rssi_level); + rate_bitmap =ODM_Get_Rate_Bitmap (&haldata->odmpriv, + mac_id, mask, rssi_level);DBG_88E ("%s => mac_id:%d, networkType:0x%02x, mask:0x%08x\n\t ==> rssi_level:%d, rate_bitmap:0x%08x\n" , __func__, mac_id, networkType, mask, rssi_level, rate_bitmap);
@@ -2023,9 +2206,9 @@ static void UpdateHalRAMask8188EUsb(struct adapter *adapt, u32 mac_id, u8 rssi_lstatic void SetBeaconRelatedRegisters8188EUsb (struct adapter *adapt) {u32 value32; -struct mlme_ext_priv *pmlmeext = &(adapt->mlmeextpriv); +struct mlme_ext_priv *pmlmeext = &(adapt->mlmeextpriv);struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); -u32 bcn_ctrl_reg =REG_BCN_CTRL ; +u32 bcn_ctrl_reg =REG_BCN_CTRL ;/* reset TSF, enable update TSF, correcting TSF On Beacon */ /* BCN interval */
@@ -2051,7 +2234,8 @@ static void SetBeaconRelatedRegisters8188EUsb(struct adapter *adapt)ResumeTxBeacon (adapt); -usb_write8 (adapt, bcn_ctrl_reg,usb_read8 (adapt, bcn_ctrl_reg) |BIT (1 )); +usb_write8 (adapt, bcn_ctrl_reg, +usb_read8 (adapt, bcn_ctrl_reg) |BIT (1 )); }static void rtl8188eu_init_default_value (struct adapter *adapt)
@@ -2109,7 +2293,8 @@ void rtl8188eu_set_hal_ops(struct adapter *adapt) halfunc->GetHalDefVarHandler = &GetHalDefVar8188EUsb; halfunc->UpdateRAMaskHandler = &UpdateHalRAMask8188EUsb; - halfunc->SetBeaconRelatedRegistersHandler = &SetBeaconRelatedRegisters8188EUsb; + halfunc->SetBeaconRelatedRegistersHandler = + &SetBeaconRelatedRegisters8188EUsb; halfunc->hal_xmit = &rtl8188eu_hal_xmit; halfunc->mgnt_xmit = &rtl8188eu_mgnt_xmit;
Signature · 1 line
2.7.2
PATCH 2/6 staging: rtl8188eu: usb_halinit.c: fixed comment blocks
In reply to Juliana RodriguesThis patch fixes checkpatch warnings related to malformed comments and comments over 80 characters limit. It also removes some clearly unnecessary/old ones and fixes minor check issues.
Signed-off-by Juliana Rodrigues <[email protected]>
--- drivers/staging/rtl8188eu/hal/usb_halinit.c | 299 ++++++++++++++++------------ 1 file changed, 170 insertions(+), 129 deletions(-)
drivers/staging/rtl8188eu/hal/usb_halinit.c +170 -129
@@ -58,12 +58,14 @@ static void _ConfigNormalChipOutEP_8188E(struct adapter *adapt, u8 NumOutPipe)static bool HalUsbSetQueuePipeMapping8188EUsb (struct adapter *adapt,u8 NumInPipe,u8 NumOutPipe) { -struct hal_data_8188e *haldata =GET_HAL_DATA (adapt); -bool result = false; +struct hal_data_8188e *haldata =GET_HAL_DATA (adapt); +bool result = false;_ConfigNormalChipOutEP_8188E (adapt, NumOutPipe); -/* Normal chip with one IN and one OUT doesn't have interrupt IN EP. */ +/* Normal chip with one IN and one OUT +* doesn't have interrupt IN EP. +*/ if (1 == haldata->OutEpNumber) {if (1 != NumInPipe)return result;
@@ -80,7 +82,7 @@ static bool HalUsbSetQueuePipeMapping8188EUsb(struct adapter *adapt,static void rtl8188eu_interface_configure (struct adapter *adapt) { -struct hal_data_8188e *haldata =GET_HAL_DATA (adapt); +struct hal_data_8188e *haldata =GET_HAL_DATA (adapt);struct dvobj_priv *pdvobjpriv =adapter_to_dvobj (adapt);if (pdvobjpriv->ishighspeed)
@@ -93,12 +95,17 @@ static void rtl8188eu_interface_configure(struct adapter *adapt) haldata->interfaceIndex = pdvobjpriv->InterfaceNumber; haldata->UsbTxAggMode =1 ; - haldata->UsbTxAggDescNum =0x6 ;/* only 4 bits */ - haldata->UsbRxAggMode =USB_RX_AGG_DMA ;/* USB_RX_AGG_DMA; */ - haldata->UsbRxAggBlockCount =8 ;/* unit : 512b */ - haldata->UsbRxAggBlockTimeout =0x6 ; - haldata->UsbRxAggPageCount =48 ;/* uint :128 b 0x0A; 10 = MAX_RX_DMA_BUFFER_SIZE/2/haldata->UsbBulkOutSize */ + haldata->UsbTxAggDescNum =0x6 ;/* only 4 bits */ + + haldata->UsbRxAggMode =USB_RX_AGG_DMA ; + + haldata->UsbRxAggBlockCount =8 ;/* unit : 512b */ + haldata->UsbRxAggBlockTimeout =0x6 ;/* uint :128 b 0x0A; +* 10 = MAX_RX_DMA_BUFFER_SIZE +* /2/haldata->UsbBulkOutSize +*/ + haldata->UsbRxAggPageCount =48 ; haldata->UsbRxAggPageTimeout =0x4 ;/* 6, * absolute time = 34ms/(2^6) */
@@ -123,13 +130,6 @@ static u32 rtl8188eu_InitPowerOn(struct adapter *adapt)return _FAIL; } -/* Enable MAC DMA/WMAC/SCHEDULE/SEC block -* Set CR bit10 to enable 32k calibration. -* Suggested by SD1 Gimmy. Added by tynli. -* 2011.08.31. -*/ - -/* suggseted by zhouzhou, by page, 20111230 */ usb_write16 (adapt,REG_CR ,0x00 );/* Enable MAC DMA/WMAC/SCHEDULE/SEC block */
@@ -137,10 +137,7 @@ static u32 rtl8188eu_InitPowerOn(struct adapter *adapt) value16 |= (HCI_TXDMA_EN |HCI_RXDMA_EN |TXDMA_EN |RXDMA_EN |PROTOCOL_EN |SCHEDULE_EN |ENSEC |CALTMR_EN ); -/* for SDIO - Set CR bit10 to enable 32k calibration. -* Suggested by SD1 Gimmy. Added by tynli. 2011.08.31. -*/ - +/* SDIO - Set CR bit10 to enable 32k calibration. */ usb_write16 (adapt,REG_CR , value16); haldata->bMacPwrCtrlOn = true;
@@ -182,7 +179,7 @@ static void _InitInterrupt(struct adapter *Adapter)static void _InitQueueReservedPage (struct adapter *Adapter) { -struct hal_data_8188e *haldata =GET_HAL_DATA (Adapter); +struct hal_data_8188e *haldata =GET_HAL_DATA (Adapter);struct registry_priv *pregistrypriv = &Adapter->registrypriv;u32 numHQ =0 ;u32 numLQ =0 ;
@@ -320,14 +317,14 @@ static void _InitNormalChipThreeOutEpPriority(struct adapter *Adapter)struct registry_priv *pregistrypriv = &Adapter->registrypriv;u16 beQ, bkQ, viQ, voQ, mgtQ, hiQ; -if (!pregistrypriv->wifi_spec) {/* typical setting */ +if (!pregistrypriv->wifi_spec) {/* typical setting */ beQ =QUEUE_LOW ; bkQ =QUEUE_LOW ; viQ =QUEUE_NORMAL ; voQ =QUEUE_HIGH ; mgtQ =QUEUE_HIGH ; hiQ =QUEUE_HIGH ; - }else {/* for WMM */ + }else {/* for WMM */ beQ =QUEUE_LOW ; bkQ =QUEUE_NORMAL ; viQ =QUEUE_NORMAL ;
@@ -371,8 +368,8 @@ static void _InitNetworkType(struct adapter *Adapter)static void _InitTransferPageSize (struct adapter *Adapter) {/* Tx page size is always 128. */ -u8 value8; + value8 =_PSRX (PBP_128 ) |_PSTX (PBP_128 );usb_write8 (Adapter,REG_PBP , value8); }
@@ -481,7 +478,8 @@ static void _InitRetryFunction(struct adapter *Adapter)* When Who Remark * 12/10/2010 MHC Separate to smaller function. * -*---------------------------------------------------------------------------*/ +*------------------------------------------------------------------------------ +*/ static void usb_AggSettingTxUpdate (struct adapter *Adapter) {struct hal_data_8188e *haldata =GET_HAL_DATA (Adapter);
@@ -514,7 +512,8 @@ static void usb_AggSettingTxUpdate(struct adapter *Adapter)* When Who Remark * 12/10/2010 MHC Separate to smaller function. * -*---------------------------------------------------------------------------*/ +*---------------------------------------------------------------------------- +*/ static void usb_AggSettingRxUpdate (struct adapter *Adapter) {struct hal_data_8188e *haldata =GET_HAL_DATA (Adapter);
@@ -607,7 +606,6 @@ static void InitUsbAggregationSetting(struct adapter *Adapter)/* Rx aggregation setting */ usb_AggSettingRxUpdate (Adapter); -/* 201/12/10 MH Add for USB agg mode dynamic switch. */ haldata->UsbRxHighSpeedMode = false; }
@@ -691,7 +689,8 @@ static void _InitAntenna_Selection(struct adapter *Adapter)* Revised History: * When Who Remark * 08/23/2010 MHC HW suspend mode switch test.. -*---------------------------------------------------------------------------*/ +*--------------------------------------------------------------------------- +*/ enum rt_rf_power_state RfOnOffDetect (struct adapter *adapt) {u8 val8;
@@ -713,18 +712,17 @@ enum rt_rf_power_state RfOnOffDetect(struct adapter *adapt)static u32 rtl8188eu_hal_init (struct adapter *Adapter) { -u8 value8 =0 ; -u16 value16; -u8 txpktbuf_bndy; -u32 status = _SUCCESS; -struct hal_data_8188e *haldata =GET_HAL_DATA (Adapter); -struct pwrctrl_priv *pwrctrlpriv = &Adapter->pwrctrlpriv; +u8 value8 =0 ; +u16 value16; +u8 txpktbuf_bndy; +u32 status = _SUCCESS; +struct hal_data_8188e *haldata =GET_HAL_DATA (Adapter); +struct pwrctrl_priv *pwrctrlpriv = &Adapter->pwrctrlpriv;struct registry_priv *pregistrypriv = &Adapter->registrypriv; -unsigned long init_start_time = jiffies; +unsigned long init_start_time = jiffies;#define HAL_INIT_PROFILE_TAG (stage) do {} while (0) -HAL_INIT_PROFILE_TAG (HAL_INIT_STAGES_BEGIN );if (Adapter->pwrctrlpriv.bkeepfwalive) {
@@ -750,8 +748,11 @@ static u32 rtl8188eu_hal_init(struct adapter *Adapter) goto exit; } -/* Save target channel */ - haldata->CurrentChannel =6 ;/* default set to 6 */ +/* Save target channel +* default set to 6 +*/ + + haldata->CurrentChannel =6 ;if (pwrctrlpriv->reg_rfoff) { pwrctrlpriv->rf_pwrstate = rf_off;
@@ -826,19 +827,21 @@ static u32 rtl8188eu_hal_init(struct adapter *Adapter)_InitDriverInfoSize (Adapter,DRVINFO_SZ );_InitInterrupt (Adapter); -hal_init_macaddr (Adapter);/* set mac_address */ -_InitNetworkType (Adapter);/* set msr */ +hal_init_macaddr (Adapter);/* set mac_address */ +_InitNetworkType (Adapter);/* set msr */ _InitWMACSetting (Adapter);_InitAdaptiveCtrl (Adapter);_InitEDCA (Adapter);_InitRetryFunction (Adapter);InitUsbAggregationSetting (Adapter);_InitBeaconParameters (Adapter); +/* Init CR MACTXEN, MACRXEN after setting RxFF * boundary REG_TRXFF_BNDY to patch Hw bug which * Hw initials RxFF boundary size to a value * which is larger than the real Rx buffer size in 88E. */ +/* Enable MACTXEN/MACRXEN block */ value16 =usb_read16 (Adapter,REG_CR ); value16 |= (MACTXEN |MACRXEN );
@@ -889,16 +892,15 @@ HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MISC11);/* Move by Neo for USB SS to below setp * _RfPowerSave(Adapter); */ -_InitAntenna_Selection (Adapter); -/* Disable BAR, suggested by Scott -* 2010.04.09 add by hpfan -*/ +/* Disable BAR */ usb_write32 (Adapter,REG_BAR_MODE_CTRL ,0x0201ffff ); -/* HW SEQ CTRL */ -/* set 0x0 to 0xFF by tynli. Default enable HW SEQ NUM. */ +/* HW SEQ CTRL +* set 0x0 to 0xFF by tynli. +* Default enable HW SEQ NUM. +*/ usb_write8 (Adapter,REG_HWSEQ_CTRL ,0xFF );if (pregistrypriv->wifi_spec)
@@ -910,19 +912,23 @@ HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MISC11);HAL_INIT_PROFILE_TAG (HAL_INIT_STAGES_INIT_HAL_DM );rtl8188e_InitHalDm (Adapter); -/* 2010/08/11 MH Merge from 8192SE for Minicard init. We need to confirm current radio status */ -/* and then decide to enable RF or not.!!!??? For Selective suspend mode. We may not */ -/* call initstruct adapter. May cause some problem?? */ -/* Fix the bug that Hw/Sw radio off before S3/S4, the RF off action will not be executed */ -/* in MgntActSet_RF_State() after wake up, because the value of haldata->eRFPowerState */ -/* is the same as eRfOff, we should change it to eRfOn after we config RF parameters. */ -/* Added by tynli. 2010.03.30. */ +/* 2010/08/11 MH Merge from 8192SE for Minicard init. +* We need to confirm current radio status, and then decide +* to enable RF or not.!!!??? For Selective suspend mode. +* We may not call initstruct adapter. May cause some problem?? +* Fix the bug that Hw/Sw radio off before S3/S4, the RF off +* action will not be executed in MgntActSet_RF_State() +* after wake up, because the value of haldata->eRFPowerState +* is the same as eRfOff, we should change it to eRfOn after +* we config RF parameters. + +* Added by tynli. 2010.03.30 +*/ pwrctrlpriv->rf_pwrstate = rf_on;/* enable Tx report. */ usb_write8 (Adapter,REG_FWHW_TXQ_CTRL +1 ,0x0F ); -/* Suggested by SD1 pisa. Added by tynli. 2011.10.21. */ /* Pretx_en, for WEP/TKIP SEC */ usb_write8 (Adapter,REG_EARLY_MODE_CONTROL +3 ,0x01 );
@@ -934,7 +940,7 @@ HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_HAL_DM); (usb_read16(Adapter, REG_TXDMA_OFFSET_CHK) | DROP_DATA_EN));HAL_INIT_PROFILE_TAG (HAL_INIT_STAGES_IQK ); -/* 2010/08/26 MH Merge from 8192CE. */ +/* 2010/08/26 MH Merge from 8192CE. */ if (pwrctrlpriv->rf_pwrstate == rf_on) {if (haldata->odmpriv.RFCalibrateInfo.bIQKInitialized) {rtl88eu_phy_iq_calibrate (Adapter, true);
@@ -951,11 +957,8 @@ HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_LCK);rtl88eu_phy_lc_calibrate (Adapter); } -/* HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_PABIAS); */ -/* _InitPABias(Adapter); */ usb_write8 (Adapter,REG_USB_HRPWM ,0 ); -/* ack for xmit mgmt frames. */ usb_write32 (Adapter,REG_FWHW_TXQ_CTRL ,usb_read32 (Adapter,REG_FWHW_TXQ_CTRL ) |BIT (12 ));
@@ -1001,7 +1004,6 @@ static void CardDisableRTL8188EU(struct adapter *Adapter)/* reset MCU ready status */ usb_write8 (Adapter,REG_MCUFWDL ,0 ); -/* YJ,add,111212 */ /* Disable 32k */ val8 =usb_read8 (Adapter,REG_32K_CTRL );usb_write8 (Adapter,REG_32K_CTRL , val8&(~BIT (0 )));
@@ -1032,8 +1034,11 @@ static void CardDisableRTL8188EU(struct adapter *Adapter) }static void rtl8192cu_hw_power_down (struct adapter *adapt) { -/* 2010/-8/09 MH For power down module, we need to enable register block contrl reg at 0x1c. */ -/* Then enable power down control bit of register 0x04 BIT4 and BIT15 as 1. */ +/* 2010/-8/09 MH For power down module, we need to +* enable register block contrl reg at 0x1c. Then +* enable power down control bit of register +* 0x04 BIT4 and BIT15 as 1. +*/ /* Enable register area 0x0-0xc. */ usb_write8 (adapt,REG_RSV_CTRL ,0x0 );
@@ -1063,7 +1068,7 @@ static u32 rtl8188eu_hal_deinit(struct adapter *Adapter) } }return _SUCCESS; - } +}static unsigned int rtl8188eu_inirp_init (struct adapter *Adapter) {
@@ -1114,11 +1119,11 @@ static unsigned int rtl8188eu_inirp_deinit(struct adapter *Adapter)return _SUCCESS; } -/* */ -/* */ -/* EEPROM/EFUSE Content Parsing */ -/* */ -/* */ +/* +* +* EEPROM/EFUSE Content Parsing +* +*/ static void Hal_EfuseParsePIDVID_8188EU (struct adapter *adapt,u8 *hwinfo,bool AutoLoadFail) {
@@ -1136,8 +1141,8 @@ static void Hal_EfuseParsePIDVID_8188EU(struct adapter *adapt, hwinfo[EEPROM_CUSTOMERID_88E ]; haldata->EEPROMSubCustomerID = EEPROM_Default_SubCustomerID; }else { - haldata->EEPROMVID = EEPROM_Default_VID; - haldata->EEPROMPID = EEPROM_Default_PID; + haldata->EEPROMVID = EEPROM_Default_VID; + haldata->EEPROMPID = EEPROM_Default_PID;/* Customer ID, 0x00 and 0xff are reserved for Realtek. */ haldata->EEPROMCustomerID = EEPROM_Default_CustomerID;
@@ -1201,9 +1206,7 @@ static void readAdapterInfo_8188EU(struct adapter *adapt) } -static void _ReadPROMContent ( -struct adapter *Adapter - ) +static void _ReadPROMContent (struct adapter *Adapter) {struct eeprom_priv *eeprom =GET_EEPROM_EFUSE_PRIV (Adapter);u8 eeValue;
@@ -1250,8 +1253,10 @@ static void ResumeTxBeacon(struct adapter *adapt) {struct hal_data_8188e *haldata =GET_HAL_DATA (adapt); -/* 2010.03.01. Marked by tynli. No need to call workitem beacause we record the value */ -/* which should be read from register to a global variable. */ +/* 2010.03.01. Marked by tynli. No need to call +* workitem beacause we record the value which +* should be read from register to a global variable. +*/ usb_write8 (adapt,REG_FWHW_TXQ_CTRL +2 , (haldata->RegFwHwTxQCtrl) |BIT (6 ));
@@ -1266,8 +1271,10 @@ static void StopTxBeacon(struct adapter *adapt) {struct hal_data_8188e *haldata =GET_HAL_DATA (adapt); -/* 2010.03.01. Marked by tynli. No need to call workitem beacause we record the value */ -/* which should be read from register to a global variable. */ +/* 2010.03.01. Marked by tynli. No need to call +* workitem beacause we record the value which should +* be read from register to a global variable. +*/ usb_write8 (adapt,REG_FWHW_TXQ_CTRL +2 , (haldata->RegFwHwTxQCtrl) & (~BIT (6 )));
@@ -1276,7 +1283,6 @@ static void StopTxBeacon(struct adapter *adapt) haldata->RegReg542 &= ~(BIT (0 ));usb_write8 (adapt,REG_TBTT_PROHIBIT +2 , haldata->RegReg542); -/* todo: CheckFwRsvdPageContent(Adapter); 2010.06.23. Added by tynli. */ }static void hw_var_set_opmode (struct adapter *Adapter,u8 variable,u8 *val)
@@ -1308,7 +1314,8 @@ static void hw_var_set_opmode(struct adapter *Adapter, u8 variable, u8 *val)usb_write8 (Adapter,REG_BCN_CTRL ,0x12 );/* Set RCR */ -usb_write32 (Adapter,REG_RCR ,0x7000208e );/* CBSSID_DATA must set to 0,reject ICV_ERR packet */ +/* CBSSID_DATA must set to 0,reject ICV_ERR packet */ +usb_write32 (Adapter,REG_RCR ,0x7000208e );/* enable to rx data frame */ usb_write16 (Adapter,REG_RXFLTMAP2 ,0xFFFF );/* enable to rx ps-poll */
@@ -1316,25 +1323,28 @@ static void hw_var_set_opmode(struct adapter *Adapter, u8 variable, u8 *val)/* Beacon Control related register for first time */ usb_write8 (Adapter,REG_BCNDMATIM ,0x02 );/* 2ms */ - -usb_write8 (Adapter,REG_ATIMWND ,0x0a );/* 10ms */ +usb_write8 (Adapter,REG_ATIMWND ,0x0a );/* 10ms */ usb_write16 (Adapter,REG_BCNTCFG ,0x00 ); +/* +32767 (~32ms) */ usb_write16 (Adapter,REG_TBTT_PROHIBIT ,0xff04 ); -usb_write16 (Adapter,REG_TSFTR_SYN_OFFSET ,0x7fff );/* +32767 (~32ms) */ +usb_write16 (Adapter,REG_TSFTR_SYN_OFFSET ,0x7fff );/* reset TSF */ usb_write8 (Adapter,REG_DUAL_TSF_RST ,BIT (0 )); -/* BIT3 - If set 0, hw will clr bcnq when tx becon ok/fail or port 0 */ +/* BIT3 - If set 0, hw will clr bcnq when +* tx becon ok/fail or port 0 +*/ usb_write8 (Adapter,REG_MBID_NUM ,usb_read8 (Adapter,REG_MBID_NUM ) |BIT (3 ) |BIT (4 )); -/* enable BCN0 Function for if1 */ -/* don't enable update TSF0 for if1 (due to TSF update when beacon/probe rsp are received) */ +/* enable BCN0 Function for if1 +* don't enable update TSF0 for if1 (due to TSF +* update when beacon/probe rsp are received) +*/ usb_write8 (Adapter,REG_BCN_CTRL , (DIS_TSF_UDT0_NORMAL_CHIP |EN_BCN_FUNCTION |BIT (1 ))); -/* dis BCN1 ATIM WND if if2 is station */ usb_write8 (Adapter,REG_BCN_CTRL_1 ,usb_read8 (Adapter,REG_BCN_CTRL_1 ) |BIT (0 )); }
@@ -1416,22 +1426,28 @@ static void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val)u16 BrateCfg =0 ;u8 RateIndex =0 ; -/* 2007.01.16, by Emily */ -/* Select RRSR (in Legacy-OFDM and CCK) */ -/* For 8190, we select only 24M, 12M, 6M, 11M, 5.5M, 2M, and 1M from the Basic rate. */ -/* We do not use other rates. */ +/* 2007.01.16, by Emily +* Select RRSR (in Legacy-OFDM and CCK) +* For 8190, we select only 24M, 12M, 6M, +* 11M, 5.5M, 2M, and 1M from the Basic rate. +* We do not use other rates. +*/ +HalSetBrateCfg (Adapter, val, &BrateCfg);DBG_88E ("HW_VAR_BASIC_RATE: BrateCfg(%#x)\n" , BrateCfg); -/* 2011.03.30 add by Luke Lee */ -/* CCK 2M ACK should be disabled for some BCM and Atheros AP IOT */ -/* because CCK 2M has poor TXEVM */ -/* CCK 5.5M & 11M ACK should be enabled for better performance */ +/* 2011.03.30 add by Luke Lee +* CCK 2M ACK should be disabled for some BCM +* and Atheros AP IOT because CCK 2M has poor TXEVM +* CCK 5.5M & 11M ACK should be enabled for +* better performance +*/ BrateCfg = (BrateCfg |0xd ) &0x15d ; haldata->BasicRateSet = BrateCfg; BrateCfg |=0x01 ;/* default enable 1M ACK rate */ +/* Set RRSR rate table. */ usb_write8 (Adapter,REG_RRSR , BrateCfg &0xff );usb_write8 (Adapter,REG_RRSR +1 , (BrateCfg >>8 ) &0xff );
@@ -1496,8 +1512,10 @@ static void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val) }break ;case HW_VAR_MLME_DISCONNECT : -/* Set RCR to not to receive data frame when NO LINK state */ -/* reject all data frames */ +/* Set RCR to not to receive data +* frame when NO LINK state +* reject all data frames. +*/ usb_write16 (Adapter,REG_RXFLTMAP2 ,0x00 );/* reset TSF */
@@ -1509,7 +1527,9 @@ static void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val)break ;case HW_VAR_MLME_SITESURVEY :if (*((u8 *)val)) {/* under sitesurvey */ -/* config RCR to receive different BSSID & not to receive data frame */ +/* config RCR to receive different +* BSSID & not to receive data frame +*/ u32 v =usb_read32 (Adapter,REG_RCR ); v &= ~(RCR_CBSSID_BCN );
@@ -1566,9 +1586,11 @@ static void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val)u8 type = *((u8 *)val);struct mlme_priv *pmlmepriv = &Adapter->mlmepriv; -if (type ==0 ) {/* prepare to join */ -/* enable to rx data frame. -* Accept all data frame */ +if (type ==0 ) { +/* prepare to join +* enable to rx data frame. +* Accept all data frame +*/ usb_write16 (Adapter,REG_RXFLTMAP2 ,0xFFFF );if (Adapter->in_cta_test) {
@@ -1627,7 +1649,6 @@ static void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val) u1bAIFS = aSifsTime + (2 * pmlmeinfo->slotTime); -/* <Roger_EXP> Temporary removed, 2008.06.20. */ usb_write8 (Adapter,REG_EDCA_VO_PARAM , u1bAIFS);usb_write8 (Adapter,REG_EDCA_VI_PARAM , u1bAIFS);usb_write8 (Adapter,REG_EDCA_BE_PARAM , u1bAIFS);
@@ -1636,18 +1657,27 @@ static void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val)break ;case HW_VAR_RESP_SIFS : -/* RESP_SIFS for CCK */ -usb_write8 (Adapter,REG_R2T_SIFS , val[0 ]);/* SIFS_T2T_CCK (0x08) */ -usb_write8 (Adapter,REG_R2T_SIFS +1 , val[1 ]);/* SIFS_R2T_CCK(0x08) */ -/* RESP_SIFS for OFDM */ -usb_write8 (Adapter,REG_T2T_SIFS , val[2 ]);/* SIFS_T2T_OFDM (0x0a) */ -usb_write8 (Adapter,REG_T2T_SIFS +1 , val[3 ]);/* SIFS_R2T_OFDM(0x0a) */ +/* RESP_SIFS for CCK +* SIFS_T2T_CCK (0x08) +* SIFS_R2T_CCK(0x08) +*/ +usb_write8 (Adapter,REG_R2T_SIFS , val[0 ]); +usb_write8 (Adapter,REG_R2T_SIFS +1 , val[1 ]); +/* RESP_SIFS for OFDM +* SIFS_T2T_OFDM (0x0a) +* SIFS_R2T_OFDM(0x0a) +*/ +usb_write8 (Adapter,REG_T2T_SIFS , val[2 ]); +usb_write8 (Adapter,REG_T2T_SIFS +1 , val[3 ]);break ;case HW_VAR_ACK_PREAMBLE : {u8 regTmp;u8 bShortPreamble = *((bool *)val); -/* Joseph marked out for Netgear 3500 TKIP channel 7 issue.(Temporarily) */ + +/* Joseph marked out for Netgear 3500 +* TKIP channel 7 issue.(Temporarily) +*/ regTmp = (haldata->nCur40MhzPrimeSC) <<5 ;if (bShortPreamble) regTmp |=0x80 ;
@@ -1693,12 +1723,16 @@ static void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val) ((u16)(ulEncAlgo) <<2 ); else ulContent =0 ; -/* polling bit, and No Write enable, and address */ +/* polling bit, +* and No Write enable, +* and address +*/ ulCommand =CAM_CONTENT_COUNT *ucIndex+i; ulCommand = ulCommand |CAM_POLLINIG |CAM_WRITE ;/* write content 0 is equall to mark invalid */ -usb_write32 (Adapter,WCAMI , ulContent);/* delay_ms(40); */ -usb_write32 (Adapter,RWCAM , ulCommand);/* delay_ms(40); */ +/* delay_ms(40); */ +usb_write32 (Adapter,WCAMI , ulContent); +usb_write32 (Adapter,RWCAM , ulCommand); } }break ;
@@ -1837,8 +1871,11 @@ static void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val) {u8 psmode = (*(u8 *)val); -/* Forece leave RF low power mode for 1T1R to prevent conficting setting in Fw power */ -/* saving sequence. 2010.06.07. Added by tynli. Suggested by SD3 yschang. */ +/* Forece leave RF low power mode for 1T1R to +* prevent conficting setting in Fw power saving +* sequence. 2010.06.07. Added by tynli. +* Suggested by SD3 yschang. +*/ if (psmode !=PS_MODE_ACTIVE )ODM_RF_Saving (podmpriv, true);rtl8188e_set_FwPwrMode_cmd (Adapter, psmode);
@@ -1891,7 +1928,9 @@ static void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val) } }break ; -case HW_VAR_EFUSE_BYTES :/* To set EFUE total used bytes, added by Roger, 2008.12.22. */ +case HW_VAR_EFUSE_BYTES :/* To set EFUE total used bytes, +* added by Roger, 2008.12.22. +*/ haldata->EfuseUsedBytes = *((u16 *)val);break ;case HW_VAR_FIFO_CLEARN_UP :
@@ -1946,7 +1985,9 @@ static void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val)rtl8188e_set_FwMediaStatus_cmd (Adapter, (*(__le16 *)val));break ;case HW_VAR_BCN_VALID : -/* BCN_VALID, BIT16 of REG_TDECTRL = BIT0 of REG_TDECTRL+2, write 1 to clear, Clear by sw */ +/* BCN_VALID, BIT16 of REG_TDECTRL = BIT0 of +* REG_TDECTRL+2, write 1 to clear, Clear by sw +*/ usb_write8 (Adapter,REG_TDECTRL +2 ,usb_read8 (Adapter,REG_TDECTRL +2 ) |BIT (0 ));break ;
@@ -1979,10 +2020,14 @@ static void GetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val)break ;case HW_VAR_FWLPS_RF_ON : { -/* When we halt NIC, we should check if FW LPS is leave. */ +/* When we halt NIC, we should +* check if FW LPS is leave. +*/ if (Adapter->pwrctrlpriv.rf_pwrstate == rf_off) { -/* If it is in HW/SW Radio OFF or IPS state, we do not check Fw LPS Leave, */ -/* because Fw is unload. */ +/* If it is in HW/SW Radio OFF or IPS state, +* we do not check Fw LPS Leave, +* because Fw is unload. +*/ val[0 ] = true; }else {u32 valRCR;
@@ -1999,7 +2044,7 @@ static void GetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val)case HW_VAR_CURRENT_ANTENNA : val[0 ] = haldata->CurAntenna;break ; -case HW_VAR_EFUSE_BYTES :/* To get EFUE total used bytes, added by Roger, 2008.12.22. */ +case HW_VAR_EFUSE_BYTES :/* To get EFUE total used bytes */ *((u16 *)(val)) = haldata->EfuseUsedBytes;break ;case HW_VAR_APFM_ON_MAC :
@@ -2016,16 +2061,12 @@ static void GetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val) } -/* */ -/* Description: */ -/* Query setting of specified variable. */ -/* */ -static u8 -GetHalDefVar8188EUsb ( -struct adapter *Adapter, -enum hal_def_variable eVariable, -void *pValue - ) +/* +* Description: Query setting of specified variable. +*/ +static u8 GetHalDefVar8188EUsb (struct adapter *Adapter, +enum hal_def_variable eVariable, +void *pValue) {struct hal_data_8188e *haldata =GET_HAL_DATA (Adapter);u8 bResult = _SUCCESS;
@@ -2144,7 +2185,7 @@ static void UpdateHalRAMask8188EUsb(struct adapter *adapt,if (psta ==NULL )return ;switch (mac_id) { -case 0 :/* for infra mode */ +case 0 :/* for infra mode */ supportRateNum =rtw_get_rateset_len (cur_network-> SupportedRates); networkType = judge_network_type(adapt,
Signature · 1 line
2.7.2
PATCH 3/6 staging: rtl8188eu: usb_halinit.c: fixes comparison warning
In reply to Juliana RodriguesThis patch fixes two warnings related to comparisons in checkpatch.pl by placing the constant on the right side of the test.
WARNING: Comparisons should place the constant on the right side of the test
+ if (1 == haldata->OutEpNumber) {
WARNING: Comparisons should place the constant on the right side of the test
+ if (1 != NumInPipe)
Signed-off-by Juliana Rodrigues <[email protected]>
--- drivers/staging/rtl8188eu/hal/usb_halinit.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/staging/rtl8188eu/hal/usb_halinit.c +2 -2
@@ -66,8 +66,8 @@ static bool HalUsbSetQueuePipeMapping8188EUsb(struct adapter *adapt,/* Normal chip with one IN and one OUT * doesn't have interrupt IN EP. */ -if (1 == haldata->OutEpNumber) { -if (1 != NumInPipe) +if (haldata->OutEpNumber ==1 ) { +if (NumInPipe !=1 )return result; }
Signature · 1 line
2.7.2
PATCH 4/6 staging: rtl8188eu: usb_halinit.c: remove unnecessary braces
In reply to Juliana RodriguesThis patch removes unnecessary braces that were
causing checkpatch warnings.
WARNING: braces {} are not necessary for single statement blocks
+ if (pwrctrlpriv->reg_rfoff) {
+ pwrctrlpriv->rf_pwrstate = rf_off;
+ }
Signed-off-by Juliana Rodrigues <[email protected]>
--- drivers/staging/rtl8188eu/hal/usb_halinit.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/staging/rtl8188eu/hal/usb_halinit.c +1 -2
@@ -754,9 +754,8 @@ static u32 rtl8188eu_hal_init(struct adapter *Adapter) haldata->CurrentChannel =6 ; -if (pwrctrlpriv->reg_rfoff) { +if (pwrctrlpriv->reg_rfoff) pwrctrlpriv->rf_pwrstate = rf_off; - }/* 2010/08/09 MH We need to check if we need to * turnon or off RF after detecting HW GPIO pin.
Signature · 1 line
2.7.2
PATCH 5/6 staging: rtl8188eu: usb_halinit.c: removes unnecessary parentheses
In reply to Juliana RodriguesExtra parentheses were causing checkpatch issues
and were removed.
WARNING: Unnecessary parentheses - maybe == should be = ?
+ } else if ((mode == _HW_STATE_ADHOC_)) {
Signed-off-by Juliana Rodrigues <[email protected]>
--- drivers/staging/rtl8188eu/hal/usb_halinit.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/staging/rtl8188eu/hal/usb_halinit.c +1 -1
@@ -1304,7 +1304,7 @@ static void hw_var_set_opmode(struct adapter *Adapter, u8 variable, u8 *val)StopTxBeacon (Adapter);usb_write8 (Adapter,REG_BCN_CTRL ,0x19 );/* disable atim wnd */ - }else if ((mode == _HW_STATE_ADHOC_)) { + }else if (mode == _HW_STATE_ADHOC_) {ResumeTxBeacon (Adapter);usb_write8 (Adapter,REG_BCN_CTRL ,0x1a ); }else if (mode == _HW_STATE_AP_) {
Signature · 1 line
2.7.2
PATCH 6/6 staging: rtl8188eu: usb_halinit.c: removes else after return
In reply to Juliana RodriguesThis patch removes an unnecessary else after a return that was causing a checkpatch issue.
WARNING: else is not generally useful after a break or return
+ return status;
+ } else {
Signed-off-by Juliana Rodrigues <[email protected]>
--- drivers/staging/rtl8188eu/hal/usb_halinit.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/staging/rtl8188eu/hal/usb_halinit.c +4 -4
@@ -790,11 +790,11 @@ static u32 rtl8188eu_hal_init(struct adapter *Adapter)DBG_88E ("%s: Download Firmware failed!!\n" , __func__); Adapter->bFWReady = false;return status; - }else { -RT_TRACE (_module_hci_hal_init_c_, _drv_info_, - ("Initializeadapt8192CSdio(): Download Firmware Success!!\n" )); - Adapter->bFWReady = true; } +RT_TRACE (_module_hci_hal_init_c_, _drv_info_, + ("Initializeadapt8192CSdio(): Download Firmware Success!!\n" )); + Adapter->bFWReady = true; + }rtl8188e_InitializeFirmwareVars (Adapter);
Signature · 1 line
2.7.2