Skip to contentSkip to conversation

Add I2S/ADV7511 audio support for ARC AXS10x boards

PATCH Superseded Jose Abreu 2 participants 6 messages Apr 5, 2016

Subsystems (7)

v3 of 9 Superseded Latest is v9 →

lore
Share & tools
lore

Jose Abreu

author
#0 lore raw

v3 cover Add I2S/ADV7511 audio support for ARC AXS10x boards

ARC AXS10x platforms consist of a mainboard with several peripherals. One of those peripherals is an HDMI output port controlled by the ADV7511 transmitter.

This patch set adds audio for the ADV7511 transmitter and I2S audio for the AXS10x platform.

Changes v2 -> v3:
* Removed pll_config functions (as suggested by Alexey Brodkin)
* Removed HDMI start at adv7511_core (as suggested by Archit Taneja)
* Use NOP functions for adv7511_audio (as suggested by Archit Taneja)
* Added adv7511_audio_exit() function (as suggested by Archit Taneja)
* Moved adv7511 to its own folder (as suggested by Archit Taneja)
* Separated file rename of adv7511_core (as suggested by Emil Velikov)
* Compile adv7511 as module if ALSA SoC is compiled as module
* Load adv7511 audio only if declared in device tree (as suggested by Laurent Pinchart)
* Dropped custom platform driver, using now ALSA DMA engine
* Dropped IRQ handler for I2S

Changes v1 -> v2:
* DT bindings moved to separate patch (as suggested by Alexey Brodkin)
* Removed defconfigs entries (as suggested by Alexey Brodkin)

Jose Abreu (3):
drm/i2c/adv7511: Rename and move to separate folder drm/i2c/adv7511: Add audio support
ASoC: dwc: Unmask I2S interrupts only for enabled channels

 .../bindings/display/bridge/adi,adv7511.txt        |   3 +
 drivers/gpu/drm/i2c/Kconfig                        |   6 +-
 drivers/gpu/drm/i2c/Makefile                       |   2 +-
 drivers/gpu/drm/i2c/adv7511/Kconfig                |  18 ++
 drivers/gpu/drm/i2c/adv7511/Makefile               |   3 +
 drivers/gpu/drm/i2c/{ => adv7511}/adv7511.h        |  53 ++++
 drivers/gpu/drm/i2c/adv7511/adv7511_audio.c        | 310 +++++++++++++++++++++
 .../drm/i2c/{adv7511.c => adv7511/adv7511_core.c}  |  43 +--
 include/sound/soc-dai.h                            |   1 +
 sound/soc/dwc/designware_i2s.c                     |   5 +-
 10 files changed, 406 insertions(+), 38 deletions(-)
 create mode 100644 drivers/gpu/drm/i2c/adv7511/Kconfig
 create mode 100644 drivers/gpu/drm/i2c/adv7511/Makefile
 rename drivers/gpu/drm/i2c/{ => adv7511}/adv7511.h (90%)
 create mode 100644 drivers/gpu/drm/i2c/adv7511/adv7511_audio.c
 rename drivers/gpu/drm/i2c/{adv7511.c => adv7511/adv7511_core.c} (97%)
Signature · 1 line
1.9.1
author
#1 lore raw

PATCH v3 1/3 drm/i2c/adv7511: Rename and move to separate folder

Main file of adv7511 driver was renamed from adv7511.c to adv7511_core.c and moved to separate folder in order to prepare the adding of audio support.

Struct adv7511 was moved to adv7511.h and functions adv7511_packet_enable() and adv7511_packet_disable() were made public also to prepare the adding of audio support.

---

This patch was only introduced in v3.

 drivers/gpu/drm/i2c/Kconfig                        |  6 +---
 drivers/gpu/drm/i2c/Makefile                       |  2 +-
 drivers/gpu/drm/i2c/adv7511/Kconfig                |  6 ++++
 drivers/gpu/drm/i2c/adv7511/Makefile               |  2 ++
 drivers/gpu/drm/i2c/{ => adv7511}/adv7511.h        | 31 +++++++++++++++++++++
 .../drm/i2c/{adv7511.c => adv7511/adv7511_core.c}  | 32 ++--------------------
 6 files changed, 43 insertions(+), 36 deletions(-)
 create mode 100644 drivers/gpu/drm/i2c/adv7511/Kconfig
 create mode 100644 drivers/gpu/drm/i2c/adv7511/Makefile
 rename drivers/gpu/drm/i2c/{ => adv7511}/adv7511.h (93%)
 rename drivers/gpu/drm/i2c/{adv7511.c => adv7511/adv7511_core.c} (97%)
drivers/gpu/drm/i2c/Kconfig +1 -5
index 22c7ed6..9258daf 100644
@@ -1,11 +1,7 @@
 menu "I2C encoder or helper chips"
      depends on DRM && DRM_KMS_HELPER && I2C
 
-config DRM_I2C_ADV7511
-	tristate "AV7511 encoder"
-	select REGMAP_I2C
-	help
-	  Support for the Analog Device ADV7511(W) and ADV7513 HDMI encoders.
+source "drivers/gpu/drm/i2c/adv7511/Kconfig"
 
 config DRM_I2C_CH7006
 	tristate "Chrontel ch7006 TV encoder"
drivers/gpu/drm/i2c/Makefile +1 -1
index 2c72eb5..f144830 100644
@@ -1,6 +1,6 @@
 ccflags-y := -Iinclude/drm
 
-obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511.o
+obj-y += adv7511/
 
 ch7006-y := ch7006_drv.o ch7006_mode.o
 obj-$(CONFIG_DRM_I2C_CH7006) += ch7006.o
drivers/gpu/drm/i2c/adv7511/Kconfig new file +6 -0
new file mode 100644
index 0000000..302c8e34
@@ -0,0 +1,6 @@
+config DRM_I2C_ADV7511
+	tristate "AV7511 encoder"
+	select REGMAP_I2C
+	help
+	  Support for the Analog Device ADV7511(W) and ADV7513 HDMI encoders.
+
drivers/gpu/drm/i2c/adv7511/Makefile new file +2 -0
new file mode 100644
index 0000000..c13f5a1
@@ -0,0 +1,2 @@
+adv7511-y := adv7511_core.o
+obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511.o
drivers/gpu/drm/i2c/adv7511/adv7511.h renamed from drivers/gpu/drm/i2c/adv7511.h +31 -0
similarity index 93%
rename from drivers/gpu/drm/i2c/adv7511.h
rename to drivers/gpu/drm/i2c/adv7511/adv7511.h
index 38515b3..fcae1ee 100644
@@ -286,4 +286,35 @@ struct adv7511_video_config {
 	struct hdmi_avi_infoframe avi_infoframe;
 };
 
+struct adv7511 {
+	struct i2c_client *i2c_main;
+	struct i2c_client *i2c_edid;
+
+	struct regmap *regmap;
+	struct regmap *packet_memory_regmap;
+	enum drm_connector_status status;
+	bool powered;
+
+	unsigned int f_tmds;
+
+	unsigned int current_edid_segment;
+	uint8_t edid_buf[256];
+	bool edid_read;
+
+	wait_queue_head_t wq;
+	struct drm_encoder *encoder;
+
+	bool embedded_sync;
+	enum adv7511_sync_polarity vsync_polarity;
+	enum adv7511_sync_polarity hsync_polarity;
+	bool rgb;
+
+	struct edid *edid;
+
+	struct gpio_desc *gpio_pd;
+};
+
+int adv7511_packet_enable(struct adv7511 *adv7511, unsigned int packet);
+int adv7511_packet_disable(struct adv7511 *adv7511, unsigned int packet);
+
 #endif /* __DRM_I2C_ADV7511_H__ */
drivers/gpu/drm/i2c/adv7511/adv7511_core.c renamed from drivers/gpu/drm/i2c/adv7511.c +2 -30
similarity index 97%
rename from drivers/gpu/drm/i2c/adv7511.c
rename to drivers/gpu/drm/i2c/adv7511/adv7511_core.c
index a02112b..2b00581 100644
@@ -20,34 +20,6 @@
 
 #include "adv7511.h"
 
-struct adv7511 {
-	struct i2c_client *i2c_main;
-	struct i2c_client *i2c_edid;
-
-	struct regmap *regmap;
-	struct regmap *packet_memory_regmap;
-	enum drm_connector_status status;
-	bool powered;
-
-	unsigned int f_tmds;
-
-	unsigned int current_edid_segment;
-	uint8_t edid_buf[256];
-	bool edid_read;
-
-	wait_queue_head_t wq;
-	struct drm_encoder *encoder;
-
-	bool embedded_sync;
-	enum adv7511_sync_polarity vsync_polarity;
-	enum adv7511_sync_polarity hsync_polarity;
-	bool rgb;
-
-	struct edid *edid;
-
-	struct gpio_desc *gpio_pd;
-};
-
 static struct adv7511 *encoder_to_adv7511(struct drm_encoder *encoder)
 {
 	return to_encoder_slave(encoder)->slave_priv;
@@ -194,7 +166,7 @@ static void adv7511_set_colormap(struct adv7511 *adv7511, bool enable,
 			   ADV7511_CSC_UPDATE_MODE, 0);
 }
 
-static int adv7511_packet_enable(struct adv7511 *adv7511, unsigned int packet)
+int adv7511_packet_enable(struct adv7511 *adv7511, unsigned int packet)
 {
 	if (packet & 0xff)
 		regmap_update_bits(adv7511->regmap, ADV7511_REG_PACKET_ENABLE0,
@@ -209,7 +181,7 @@ static int adv7511_packet_enable(struct adv7511 *adv7511, unsigned int packet)
 	return 0;
 }
 
-static int adv7511_packet_disable(struct adv7511 *adv7511, unsigned int packet)
+int adv7511_packet_disable(struct adv7511 *adv7511, unsigned int packet)
 {
 	if (packet & 0xff)
 		regmap_update_bits(adv7511->regmap, ADV7511_REG_PACKET_ENABLE0,
Signature · 1 line
1.9.1
author
#2 lore raw

PATCH v3 2/3 drm/i2c/adv7511: Add audio support

In reply to Jose Abreu

This patch adds audio support for the ADV7511 HDMI transmitter using ALSA SoC.

The code was ported from Analog Devices linux tree from commit 1770c4a1e32b ("Merge remote-tracking branch 'xilinx/master' into xcomm_zynq"), which is available at:
- https://github.com/analogdevicesinc/linux/

The audio can be disabled using menu-config so it is possible to use only video mode. The audio (when enabled) registers as a codec into ALSA.

SPDIF DAI format was also added to ASoC as it is required by adv7511 audio.

---
 .../bindings/display/bridge/adi,adv7511.txt        |   3 +
 drivers/gpu/drm/i2c/adv7511/Kconfig                |  12 +
 drivers/gpu/drm/i2c/adv7511/Makefile               |   1 +
 drivers/gpu/drm/i2c/adv7511/adv7511.h              |  22 ++
 drivers/gpu/drm/i2c/adv7511/adv7511_audio.c        | 310 +++++++++++++++++++++
 drivers/gpu/drm/i2c/adv7511/adv7511_core.c         |  11 +
 include/sound/soc-dai.h                            |   1 +
 7 files changed, 360 insertions(+)
 create mode 100644 drivers/gpu/drm/i2c/adv7511/adv7511_audio.c
Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt +3 -0
index 96c25ee..920e542 100644
@@ -43,6 +43,9 @@ Optional properties:
   data stream (similar to BT.656). Defaults to separate H/V synchronization
   signals.
 
+- adi,enable-audio: If set the ADV7511 driver will register a codec interface
+  into ALSA SoC.
+
 Required nodes:
 
 The ADV7511 has two video ports. Their connections are modelled using the OF
drivers/gpu/drm/i2c/adv7511/Kconfig +12 -0
index 302c8e34..900f3e9 100644
@@ -4,3 +4,15 @@ config DRM_I2C_ADV7511
 	help
 	  Support for the Analog Device ADV7511(W) and ADV7513 HDMI encoders.
 
+config DRM_I2C_ADV7511_AUDIO
+	bool "ADV7511 audio"
+	depends on DRM_I2C_ADV7511
+	depends on SND_SOC=y || (SND_SOC && DRM_I2C_ADV7511=m)
+	default y
+	help
+	  This adds support for audio on the ADV7511(W) and ADV7513 HDMI
+	  encoders.
+
+	  By selecting this option the ADV7511 will register a codec interface
+	  into ALSA.
+
drivers/gpu/drm/i2c/adv7511/Makefile +1 -0
index c13f5a1..d68773a 100644
@@ -1,2 +1,3 @@
 adv7511-y := adv7511_core.o
+adv7511-$(CONFIG_DRM_I2C_ADV7511_AUDIO) += adv7511_audio.o
 obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511.o
drivers/gpu/drm/i2c/adv7511/adv7511.h +22 -0
index fcae1ee..35828f0 100644
@@ -10,6 +10,7 @@
 #define __DRM_I2C_ADV7511_H__
 
 #include <linux/hdmi.h>
+#include <drm/drmP.h>
 
 #define ADV7511_REG_CHIP_REVISION		0x00
 #define ADV7511_REG_N0				0x01
@@ -241,6 +242,7 @@ enum adv7511_sync_polarity {
  * @sync_pulse:			Select the sync pulse
  * @vsync_polarity:		vsync input signal configuration
  * @hsync_polarity:		hsync input signal configuration
+ * @enable_audio		True if audio is enabled
  */
 struct adv7511_link_config {
 	unsigned int input_color_depth;
@@ -255,6 +257,8 @@ struct adv7511_link_config {
 	enum adv7511_input_sync_pulse sync_pulse;
 	enum adv7511_sync_polarity vsync_polarity;
 	enum adv7511_sync_polarity hsync_polarity;
+
+	bool enable_audio;
 };
 
 /**
@@ -296,6 +300,10 @@ struct adv7511 {
 	bool powered;
 
 	unsigned int f_tmds;
+	unsigned int f_audio;
+
+	unsigned int audio_source;
+	bool enable_audio;
 
 	unsigned int current_edid_segment;
 	uint8_t edid_buf[256];
@@ -317,4 +325,18 @@ struct adv7511 {
 int adv7511_packet_enable(struct adv7511 *adv7511, unsigned int packet);
 int adv7511_packet_disable(struct adv7511 *adv7511, unsigned int packet);
 
+#ifdef CONFIG_DRM_I2C_ADV7511_AUDIO
+int adv7511_audio_init(struct device *dev);
+void adv7511_audio_exit(struct device *dev);
+#else
+int adv7511_audio_init(struct device *dev)
+{
+	return 0;
+}
+void adv7511_audio_exit(struct device *dev)
+{
+
+}
+#endif
+
 #endif /* __DRM_I2C_ADV7511_H__ */
drivers/gpu/drm/i2c/adv7511/adv7511_audio.c new file +310 -0

310 lines not on this page · raw message

drivers/gpu/drm/i2c/adv7511/adv7511_core.c +11 -0
index 2b00581..140a64b 100644
@@ -329,6 +329,7 @@ static void adv7511_set_link_config(struct adv7511 *adv7511,
 	adv7511->hsync_polarity = config->hsync_polarity;
 	adv7511->vsync_polarity = config->vsync_polarity;
 	adv7511->rgb = config->input_colorspace == HDMI_COLORSPACE_RGB;
+	adv7511->enable_audio = config->enable_audio;
 }
 
 static void adv7511_power_on(struct adv7511 *adv7511)
@@ -822,6 +823,7 @@ static int adv7511_parse_dt(struct device_node *np,
 		return -EINVAL;
 
 	config->embedded_sync = of_property_read_bool(np, "adi,embedded-sync");
+	config->enable_audio = of_property_read_bool(np, "adi,enable-audio");
 
 	/* Hardcode the sync pulse configurations for now. */
 	config->sync_pulse = ADV7511_INPUT_SYNC_PULSE_NONE;
@@ -916,6 +918,12 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
 
 	adv7511_set_link_config(adv7511, &link_config);
 
+	if (link_config.enable_audio) {
+		ret = adv7511_audio_init(&i2c->dev);
+		if (ret)
+			goto err_i2c_unregister_device;
+	}
+
 	return 0;
 
 err_i2c_unregister_device:
@@ -930,6 +938,9 @@ static int adv7511_remove(struct i2c_client *i2c)
 
 	i2c_unregister_device(adv7511->i2c_edid);
 
+	if (adv7511->enable_audio)
+		adv7511_audio_exit(&i2c->dev);
+
 	kfree(adv7511->edid);
 
 	return 0;
include/sound/soc-dai.h +1 -0
index 964b7de..539c091 100644
@@ -33,6 +33,7 @@ struct snd_compr_stream;
 #define SND_SOC_DAIFMT_DSP_B		5 /* L data MSB during FRM LRC */
 #define SND_SOC_DAIFMT_AC97		6 /* AC97 */
 #define SND_SOC_DAIFMT_PDM		7 /* Pulse density modulation */
+#define SND_SOC_DAIFMT_SPDIF		8 /* SPDIF */
 
 /* left and right justified also known as MSB and LSB respectively */
 #define SND_SOC_DAIFMT_MSB		SND_SOC_DAIFMT_LEFT_J
Signature · 1 line
1.9.1
author
#3 lore raw

PATCH v3 3/3 ASoC: dwc: Unmask I2S interrupts only for enabled channels

In reply to Jose Abreu

There is no need to unmask all interrupts at I2S start. This can cause performance issues in slower platforms.

Unmask only the interrupts for the used channels.

---

Changes v2 -> v3:
* Dropped custom platform driver, using now ALSA DMA engine
* Dropped IRQ handler for I2S
* Removed pll_config functions (as suggested by Alexey Brodkin)

No changes v1 -> v2.

 sound/soc/dwc/designware_i2s.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
sound/soc/dwc/designware_i2s.c +3 -2
index bff258d..3effcd1 100644
@@ -147,17 +147,18 @@ static inline void i2s_clear_irqs(struct dw_i2s_dev *dev, u32 stream)
 static void i2s_start(struct dw_i2s_dev *dev,
 		      struct snd_pcm_substream *substream)
 {
+	struct i2s_clk_config_data *config = &dev->config;
 	u32 i, irq;
 	i2s_write_reg(dev->i2s_base, IER, 1);
 
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
-		for (i = 0; i < 4; i++) {
+		for (i = 0; i < (config->chan_nr / 2); i++) {
 			irq = i2s_read_reg(dev->i2s_base, IMR(i));
 			i2s_write_reg(dev->i2s_base, IMR(i), irq & ~0x30);
 		}
 		i2s_write_reg(dev->i2s_base, ITER, 1);
 	} else {
-		for (i = 0; i < 4; i++) {
+		for (i = 0; i < (config->chan_nr / 2); i++) {
 			irq = i2s_read_reg(dev->i2s_base, IMR(i));
 			i2s_write_reg(dev->i2s_base, IMR(i), irq & ~0x03);
 		}
Signature · 1 line
1.9.1
maintainer
#4 lore raw

Re: [PATCH 3/3 v3] ASoC: dwc: Unmask I2S interrupts only for enabled channels

Quoted 4 lines · Jose Abreu

There is no need to unmask all interrupts at I2S start. This can cause performance issues in slower platforms.

Unmask only the interrupts for the used channels.

This appears to be completely unrelated to the other two patches in the series. Please don't mix unrelated changes in a single series, it creates interdependencies that don't really exist - if you've got a separate change or set of changes send them separately.

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel

maintainer
#5 lore raw

Applied "ASoC: dwc: Unmask I2S interrupts only for enabled channels" to the asoc tree

In reply to Jose Abreu

The patch

ASoC: dwc: Unmask I2S interrupts only for enabled channels

has been applied to the asoc tree at

git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark

Quoted 1 line

From 613c7c4003c8338a9a638485d95de2775948295b Mon Sep 17 00:00:00 2001

From: Jose Abreu <[email protected]>
Date: Tue, 5 Apr 2016 18:08:02 +0100
Subject: [PATCH] ASoC: dwc: Unmask I2S interrupts only for enabled channels

There is no need to unmask all interrupts at I2S start. This can cause performance issues in slower platforms.

Unmask only the interrupts for the used channels.

---
 sound/soc/dwc/designware_i2s.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
sound/soc/dwc/designware_i2s.c +3 -2
index bff258d7bcea..3effcd1a7df8 100644
@@ -147,17 +147,18 @@ static inline void i2s_clear_irqs(struct dw_i2s_dev *dev, u32 stream)
 static void i2s_start(struct dw_i2s_dev *dev,
 		      struct snd_pcm_substream *substream)
 {
+	struct i2s_clk_config_data *config = &dev->config;
 	u32 i, irq;
 	i2s_write_reg(dev->i2s_base, IER, 1);
 
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
-		for (i = 0; i < 4; i++) {
+		for (i = 0; i < (config->chan_nr / 2); i++) {
 			irq = i2s_read_reg(dev->i2s_base, IMR(i));
 			i2s_write_reg(dev->i2s_base, IMR(i), irq & ~0x30);
 		}
 		i2s_write_reg(dev->i2s_base, ITER, 1);
 	} else {
-		for (i = 0; i < 4; i++) {
+		for (i = 0; i < (config->chan_nr / 2); i++) {
 			irq = i2s_read_reg(dev->i2s_base, IMR(i));
 			i2s_write_reg(dev->i2s_base, IMR(i), irq & ~0x03);
 		}
Signature · 1 line
2.8.0.rc3