drivers: touchscreen: tsc2007 and ads7846/tsc2046 improvements (use common touchscreen bindings, pre-calibration, spi fix and provide iio raw values)
Subsystems (5)
v8 cover drivers: touchscreen: tsc2007 and ads7846/tsc2046 improvements (use common touchscreen bindings, pre-calibration, spi fix and provide iio raw values)
Changes V8:
* fix compilation for CONFIG_IIO=m (reported by Jonathan Cameron <[email protected]>)
* add some more Reviewed-by: and Acked-by:
* mutiple improvements suggested by Dmitry Torokhov <[email protected]>:
** drop patch "send pendown and penup only once" (input core does take care of it now)
** remove not necessary EXPORT_SYMBOL
** remove explicit file names from comment header
** move tsc2007_iio_configure() to the end of the probe process and simplify the error path again ** remove unnecessary input_unregister_device()
** improvement for compilation with CONFIG_IIO=m and CONFIG_TSC2007=y
2016-11-11 20:02:11: Changes V7:
* rearranged the include files (asked for by Jonathan Cameron <[email protected]>)
* forward reference struct iio_dev * instead of condition in tsc2007.h (asked for by Jonathan Cameron <[email protected]>)
* add some Acked-by:
2016-10-27 10:44:29: Changes V6:
* iio patch (no changes elsewhere)
- tsc2007_iio: fix a missing return 0 for non-iio case (found by kbuid test robot)
- tsc2007_core: group error return paths so that tsc2007_iio_unconfigure is called at only one place
- tsc2007_iio: fix copyright (this file is 100% original work)
2016-10-25 21:26:46: Changes V5:
* ads7846: remove an empty line (suggested by Andrew F. Davis <[email protected]>)
* ads7846: remove MODULE_ALIAS for SPI (suggested by Andrew F. Davis <[email protected]>)
* tsc2007: fix a bug from swapping patch 3/n and patch 4/n (found by kbuild test robot)
* refactored tsc2007 into tsc2007_core and tsc2007_iio (asked for by Jonathan Cameron <[email protected]>)
2016-10-17 16:00:02: Changes V4:
* fix a merge/squash issue resulting in a non-bisectable patch set (suggested by kbuid test robot)
* remove some unnecessary #include (suggested by Jonathan Cameron <[email protected]>)
* make the iio extension depend on CONFIG_IIO rather than selecting it (suggested by Jonathan Cameron <[email protected]>)
* swapped patch 3/n and patch 4/n to remove internal dependency
2016-09-23 14:41:23: Changes V3:
* fix an issue with swapping
* remove hard clipping to min/max rectangle - some systems expect to handle negative coordinates
* make use of commit ed7c9870c9bc ("Input: of_touchscreen - add support for inverted / swapped axes")
2015-11-13 21:36:07: Changes V2:
* add a patch to make drivers still recognise the old "ti,swap-xy" property (suggested by Rob Herring)
2015-11-06 16:14:53: V1: This patch series improves the drivers for the tsc2007 and
ads7846/tsc2046 touchscreen controllers which are e.g. used by the GTA04 OpenPandora and Pyra devices.
New common bindings have been defined by
commit b98abe52fa8e ("Input: add common DT binding for touchscreens"):
Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
which also defines a helper function to parse the DT. These new parameters allow to specify the fuzz factors (jitter suppression), inversion of x or y axis and swapping of x and y to achieve inversion and rotation so that the touch coordinate axes match the natural orientation of the display panel.
Another improvement is to better use the min/max ADC values and scale to the screen size as defined by the DT. This allows to coarsely calibrate the touch to match the LCD to which it is glued on so that the touch can quite precisely be operated before any user-space fine-calibration can be (and needs to be) started.
For the adc7846 we fix an issue with the spi module table.
Finally we add an iio interface for the AUX and temperature ADC channels of the tsc2007 and also provide the touch screen raw values. This allows to read an optional ambient light sensor installed on the gta04 board and improves calibration and hardware monitoring.
H. Nikolaus Schaller (8):
drivers:input:tsc2007: add new common binding names, pre-calibration,
flipping and rotation
drivers:input:tsc2007: check for presence and power down tsc2007
during probe
drivers:input:tsc2007: add iio interface to read external ADC input
and temperature
DT:omap3+tsc2007: use new common touchscreen bindings drivers:input:ads7846(+tsc2046): add new common binding names,
pre-calibration and flipping
dt-bindings: input: move ads7846 bindings to touchscreen subdirectory drivers:input:ads7846(+tsc2046): fix spi module table DT:omap3+ads7846: use new common touchscreen bindings
.../bindings/input/{ => touchscreen}/ads7846.txt | 9 +-
.../bindings/input/touchscreen/tsc2007.txt | 20 +-
arch/arm/boot/dts/omap3-gta04.dtsi | 25 ++-
arch/arm/boot/dts/omap3-lilly-a83x.dtsi | 2 +-
arch/arm/boot/dts/omap3-pandora-common.dtsi | 17 +-
.../boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi | 3 +-
drivers/input/touchscreen/Makefile | 7 +
drivers/input/touchscreen/ads7846.c | 71 ++++++--
drivers/input/touchscreen/tsc2007.h | 116 ++++++++++++
.../touchscreen/{tsc2007.c => tsc2007_core.c} | 201 ++++++++++++---------
drivers/input/touchscreen/tsc2007_iio.c | 150 +++++++++++++++
include/linux/i2c/tsc2007.h | 8 +
12 files changed, 515 insertions(+), 114 deletions(-)
rename Documentation/devicetree/bindings/input/{ => touchscreen}/ads7846.txt (90%)
create mode 100644 drivers/input/touchscreen/tsc2007.h
rename drivers/input/touchscreen/{tsc2007.c => tsc2007_core.c} (74%)
create mode 100644 drivers/input/touchscreen/tsc2007_iio.cSignature · 1 line
2.7.3
PATCH v8 1/8 drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
commit b98abe52fa8e ("Input: add common DT binding for touchscreens") introduced common DT bindings for touchscreens [1] and a helper function to parse the DT.
commit ed7c9870c9bc ("Input: of_touchscreen - add support for inverted / swapped axes") added another helper for parsing axis inversion and swapping
and applying them to x and y coordinates.
Both helpers have been integrated to accommodate any orientation of the touch panel in relation to the LCD.
A new feature is to introduce scaling the min/max ADC values to the screen size.
This makes it possible to pre-calibrate the touch so that is (almost) exactly matches the LCD pixel coordinates it is glued onto. This allows to well enough operate the touch before a user space calibration step can improve the precision.
Please note that the old ti,fuzz properties have been removed since they are replaced by the common bindings touchscreen-fuzz-x/y/z.
Finally, calculate_pressure has been renamed to calculate_resistance because that is what it is doing.
[1]: Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
--- .../bindings/input/touchscreen/tsc2007.txt | 20 ++-- drivers/input/touchscreen/tsc2007.c | 120 +++++++++++++++++---- include/linux/i2c/tsc2007.h | 8 ++ 3 files changed, 118 insertions(+), 30 deletions(-)
Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt +13 -7
@@ -6,6 +6,7 @@ Required properties: - ti,x-plate-ohms: X-plate resistance in ohms. Optional properties: +- generic touch screen properties: see touchscreen binding [2]. - gpios: the interrupt gpio the chip is connected to (trough the penirq pin). The penirq pin goes to low when the panel is touched. (see GPIO binding[1] for more details).
@@ -13,17 +14,20 @@ Optional properties: (see interrupt binding[0]). - interrupts: (gpio) interrupt to which the chip is connected (see interrupt binding[0]). -- ti,max-rt: maximum pressure. -- ti,fuzzx: specifies the absolute input fuzz x value. - If set, it will permit noise in the data up to +- the value given to the fuzz - parameter, that is used to filter noise from the event stream. -- ti,fuzzy: specifies the absolute input fuzz y value. -- ti,fuzzz: specifies the absolute input fuzz z value. +- ti,max-rt: maximum pressure resistance above which samples are ignored + (default: 4095). +- ti,report-resistance: report resistance (no pressure = max_rt) instead + of pressure (no pressure = 0). +- ti,min-x: minimum value reported by X axis ADC (default 0). +- ti,max-x: maximum value reported by X axis ADC (default 4095). +- ti,min-y: minimum value reported by Y axis ADC (default 0). +- ti,max-y: maximum value reported by Y axis ADC (default 4095). - ti,poll-period: how much time to wait (in milliseconds) before reading again the - values from the tsc2007. + values from the tsc2007 (default 1). [0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt [1]: Documentation/devicetree/bindings/gpio/gpio.txt +[2]: Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt Example: &i2c1 {
@@ -35,6 +39,8 @@ Example: interrupts = <0x0 0x8>; gpios = <&gpio4 0 0>; ti,x-plate-ohms = <180>; + touchscreen-size-x = <640>; + touchscreen-size-y = <480>; }; /* ... */
drivers/input/touchscreen/tsc2007.c +97 -23
212 lines not on this page · raw message
include/linux/i2c/tsc2007.h +8 -0
@@ -6,6 +6,14 @@struct tsc2007_platform_data {u16 model;/* 2007. */ u16 x_plate_ohms;/* must be non-zero value */ +bool swap_xy;/* swap x and y axis */ +bool invert_x; +bool invert_y; +bool report_resistance; +u16 min_x;/* min and max values reported by ADC */ +u16 min_y; +u16 max_x; +u16 max_y;u16 max_rt;/* max. resistance above which samples are ignored */ unsigned long poll_period;/* time (in ms) between samples */ int fuzzx;/* fuzz factor for X, Y and pressure axes */
Signature · 1 line
2.7.3
PATCH v8 2/8 drivers:input:tsc2007: check for presence and power down tsc2007 during probe
In reply to H. Nikolaus Schaller1. check if chip is really present and don't succeed if it isn't.
2. if it succeeds, power down the chip until accessed
--- drivers/input/touchscreen/tsc2007.c | 8 ++++++++ 1 file changed, 8 insertions(+)
drivers/input/touchscreen/tsc2007.c +8 -0
@@ -529,6 +529,14 @@ static int tsc2007_probe(struct i2c_client *client,tsc2007_stop (ts); +/* power down the chip (TSC2007_SETUP does not ACK on I2C) */ + err =tsc2007_xfer (ts,PWRDOWN ); +if (err <0 ) { +dev_err (&client->dev, +"Failed to setup chip: %d\n" , err); +return err;/* usually, chip does not respond */ + } + err =input_register_device (input_dev);if (err) { dev_err(&client->dev,
Signature · 1 line
2.7.3
PATCH v8 3/8 drivers:input:tsc2007: add iio interface to read external ADC input and temperature
In reply to H. Nikolaus SchallerThe tsc2007 chip not only has a resistive touch screen controller but also an external AUX adc imput which can be used for an ambient light sensor, battery voltage monitoring or any general purpose.
Additionally it can measure the chip temperature.
This extension provides an iio interface for these adc channels.
Since it is not wasting much resources and is very straightforward, we simply provide all other adc channels as optional iio interfaces as weel. This can be used for debugging or special applications.
This patch also splits the tsc2007 driver in several source files:tsc2007.h -- constants, structs and stubs tsc2007_core.c -- functional parts of the original driver tsc2007_iio.c -- the optional iio stuff
Makefile magic allows to conditionally link the iio stuff if CONFIG_IIO=y or =m in a way that it works with CONFIG_TOUCHSCREEN_TSC2007=m.
---
drivers/input/touchscreen/Makefile | 7 +
drivers/input/touchscreen/tsc2007.h | 116 ++++++++++++++++
.../touchscreen/{tsc2007.c => tsc2007_core.c} | 95 +++----------
drivers/input/touchscreen/tsc2007_iio.c | 150 +++++++++++++++++++++
4 files changed, 294 insertions(+), 74 deletions(-)
create mode 100644 drivers/input/touchscreen/tsc2007.h
rename drivers/input/touchscreen/{tsc2007.c => tsc2007_core.c} (86%)
create mode 100644 drivers/input/touchscreen/tsc2007_iio.cdrivers/input/touchscreen/Makefile +7 -0
@@ -80,6 +80,13 @@ obj-$(CONFIG_TOUCHSCREEN_TSC_SERIO) += tsc40.o obj-$(CONFIG_TOUCHSCREEN_TSC200X_CORE) += tsc200x-core.o obj-$(CONFIG_TOUCHSCREEN_TSC2004) += tsc2004.o obj-$(CONFIG_TOUCHSCREEN_TSC2005) += tsc2005.o +tsc2007-y := tsc2007_core.o +ifeq ($(CONFIG_IIO),y) +tsc2007-y += tsc2007_iio.o +endif +ifeq ($(CONFIG_IIO),m) +tsc2007-y += tsc2007_iio.o +endif obj-$(CONFIG_TOUCHSCREEN_TSC2007) += tsc2007.o obj-$(CONFIG_TOUCHSCREEN_UCB1400) += ucb1400_ts.o obj-$(CONFIG_TOUCHSCREEN_WACOM_W8001) += wacom_w8001.o
drivers/input/touchscreen/tsc2007.h new file +116 -0
116 lines not on this page · raw message
drivers/input/touchscreen/tsc2007_core.c renamed from drivers/input/touchscreen/tsc2007.c +21 -74
154 lines not on this page · raw message
drivers/input/touchscreen/tsc2007_iio.c new file +150 -0
150 lines not on this page · raw message
Signature · 1 line
2.7.3
Re: [PATCH v8 3/8] drivers:input:tsc2007: add iio interface to read external ADC input and temperature
Quoted 44 lines · H. Nikolaus Schaller
The tsc2007 chip not only has a resistive touch screen controller but also an external AUX adc imput which can be used for an ambient light sensor, battery voltage monitoring or any general purpose.
Additionally it can measure the chip temperature.
This extension provides an iio interface for these adc channels.
Since it is not wasting much resources and is very straightforward, we simply provide all other adc channels as optional iio interfaces as weel. This can be used for debugging or special applications.
This patch also splits the tsc2007 driver in several source files:
tsc2007.h-- constants, structs and stubstsc2007_core.c-- functional parts of the original drivertsc2007_iio.c-- the optional iio stuff
Makefilemagic allows to conditionally link the iio stuff ifCONFIG_IIO=yor =m in a way that it works withCONFIG_TOUCHSCREEN_TSC2007=m.Signed-off-by H. Nikolaus Schaller <[email protected]>Reviewed-by Jonathan Cameron <[email protected]>---
drivers/input/touchscreen/Makefile| 7 +drivers/input/touchscreen/tsc2007.h| 116
++++++++++++++++.../touchscreen/{tsc2007.c=>tsc2007_core.c} | 95 +++----------drivers/input/touchscreen/tsc2007_iio.c| 150
+++++++++++++++++++++4 files changed, 294 insertions(+), 74 deletions(-)create mode 100644
drivers/input/touchscreen/tsc2007.hrenamedrivers/input/touchscreen/{tsc2007.c=>tsc2007_core.c} (86%) create mode 100644drivers/input/touchscreen/tsc2007_iio.cdrivers/input/touchscreen/Makefile +0
-0@@ -80,6 +80,13 @@ obj-$(CONFIG_TOUCHSCREEN_TSC_SERIO) += tsc40.oobj-$(CONFIG_TOUCHSCREEN_TSC200X_CORE) += tsc200x-core.o
obj-$(CONFIG_TOUCHSCREEN_TSC2004) += tsc2004.o
obj-$(CONFIG_TOUCHSCREEN_TSC2005) += tsc2005.o
drivers/input/touchscreen/Makefile obj-$(CONFIG_TOUCHSCREEN_TSC_SERIO) += tsc40.o · line 88
Quoted 6 lines
drivers/input/touchscreen/Makefile +6
-0+tsc2007-y := tsc2007_core.o +ifeq ($(CONFIG_IIO),y) +tsc2007-y += tsc2007_iio.o +endif +ifeq ($(CONFIG_IIO),m) +tsc2007-y += tsc2007_iio.o
Not tsc2007-m ?
I don't follow how this works!
Quoted 464 lines
+endif
obj-$(CONFIG_TOUCHSCREEN_TSC2007) += tsc2007.o
obj-$(CONFIG_TOUCHSCREEN_UCB1400) += ucb1400_ts.o
obj-$(CONFIG_TOUCHSCREEN_WACOM_W8001) += wacom_w8001.odrivers/input/touchscreen/tsc2007.h new file +16
-0@@ -0,0 +1,116 @@ +/* +* Copyright (c) 2008 MtekVision Co., Ltd. +* Kwangwoo Lee <kwlee-ec7hoAtq5SbSUeElwK9/[email protected]> +* +* Using code from: +* - ads7846.c +* Copyright (c) 2005 David Brownell +* Copyright (c) 2006 Nokia Corporation +* - corgi_ts.c +* Copyright (C) 2004-2005 Richard Purdie +* - omap_ts.[hc], ads7846.h, ts_osk.c +* Copyright (C) 2002 MontaVista Software +* Copyright (C) 2004 Texas Instruments +* Copyright (C) 2005 Dirk Behme +* +* This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */drivers/input/touchscreen/tsc2007.h new file +97
-0+ +#include <linux/input/touchscreen.h> + +#define TSC2007_MEASURE_TEMP0 (0x0 << 4) +#define TSC2007_MEASURE_AUX (0x2 << 4) +#define TSC2007_MEASURE_TEMP1 (0x4 << 4) +#define TSC2007_ACTIVATE_XN (0x8 << 4) +#define TSC2007_ACTIVATE_YN (0x9 << 4) +#define TSC2007_ACTIVATE_YP_XN (0xa << 4) +#define TSC2007_SETUP (0xb << 4) +#define TSC2007_MEASURE_X (0xc << 4) +#define TSC2007_MEASURE_Y (0xd << 4) +#define TSC2007_MEASURE_Z1 (0xe << 4) +#define TSC2007_MEASURE_Z2 (0xf << 4) + +#define TSC2007_POWER_OFF_IRQ_EN (0x0 << 2) +#define TSC2007_ADC_ON_IRQ_DIS0 (0x1 << 2) +#define TSC2007_ADC_OFF_IRQ_EN (0x2 << 2) +#define TSC2007_ADC_ON_IRQ_DIS1 (0x3 << 2) + +#define TSC2007_12BIT (0x0 << 1) +#define TSC2007_8BIT (0x1 << 1) + +#define MAX_12BIT ((1 << 12) - 1) + +#define ADC_ON_12BIT (TSC2007_12BIT | TSC2007_ADC_ON_IRQ_DIS0) + +#define READ_Y (ADC_ON_12BIT | TSC2007_MEASURE_Y) +#define READ_Z1 (ADC_ON_12BIT | TSC2007_MEASURE_Z1) +#define READ_Z2 (ADC_ON_12BIT | TSC2007_MEASURE_Z2) +#define READ_X (ADC_ON_12BIT | TSC2007_MEASURE_X) +#define PWRDOWN (TSC2007_12BIT | TSC2007_POWER_OFF_IRQ_EN) + +struct ts_event { +u16 x; +u16 y; +u16 z1, z2; +}; + +struct tsc2007 { +struct input_dev *input; +char phys[32 ]; + +struct i2c_client *client; + +u16 model; +u16 x_plate_ohms; + +struct touchscreen_properties prop; + +bool report_resistance; +u16 min_x; +u16 min_y; +u16 max_x; +u16 max_y; +u16 max_rt; +unsigned long poll_period;/* in jiffies */ +int fuzzx; +int fuzzy; +int fuzzz; + +unsigned int gpio; +int irq; + +wait_queue_head_t wait; +bool stopped; +bool pendown; + +int (*get_pendown_state)(struct device *); +void (*clear_penirq)(void ); + +struct mutex mlock; +struct iio_dev *iio_dev;/* optional */ +}; + +int tsc2007_xfer (struct tsc2007 *tsc,u8 cmd); +u32 tsc2007_calculate_resistance (struct tsc2007 *tsc, +struct ts_event *tc); +bool tsc2007_is_pen_down (struct tsc2007 *ts); + +#if IS_ENABLED (CONFIG_IIO ) + +/* defined in tsc2007_iio.c */ +int tsc2007_iio_configure (struct tsc2007 *ts); +void tsc2007_iio_unconfigure (struct tsc2007 *ts); + +#else /* CONFIG_IIO */ + +static inline int tsc2007_iio_configure (struct tsc2007 *ts) +{ +return 0 ; +} +static inline void tsc2007_iio_unconfigure (struct tsc2007 *ts) +{ +} + +#endif /* CONFIG_IIO */ drivers/input/touchscreen/tsc2007_core.c renamed from drivers/input/touchscreen/tsc2007.c +3
-71@@ -27,79 +27,11 @@#include <linux/i2c.h> #include <linux/i2c/tsc2007.h> #include <linux/of_device.h> -#include <linux/of.h> #include <linux/of_gpio.h> -#include <linux/input/touchscreen.h> - -#define TSC2007_MEASURE_TEMP0 (0x0 << 4) -#define TSC2007_MEASURE_AUX (0x2 << 4) -#define TSC2007_MEASURE_TEMP1 (0x4 << 4) -#define TSC2007_ACTIVATE_XN (0x8 << 4) -#define TSC2007_ACTIVATE_YN (0x9 << 4) -#define TSC2007_ACTIVATE_YP_XN (0xa << 4) -#define TSC2007_SETUP (0xb << 4) -#define TSC2007_MEASURE_X (0xc << 4) -#define TSC2007_MEASURE_Y (0xd << 4) -#define TSC2007_MEASURE_Z1 (0xe << 4) -#define TSC2007_MEASURE_Z2 (0xf << 4) - -#define TSC2007_POWER_OFF_IRQ_EN (0x0 << 2) -#define TSC2007_ADC_ON_IRQ_DIS0 (0x1 << 2) -#define TSC2007_ADC_OFF_IRQ_EN (0x2 << 2) -#define TSC2007_ADC_ON_IRQ_DIS1 (0x3 << 2) - -#define TSC2007_12BIT (0x0 << 1) -#define TSC2007_8BIT (0x1 << 1) - -#define MAX_12BIT ((1 << 12) - 1) - -#define ADC_ON_12BIT (TSC2007_12BIT | TSC2007_ADC_ON_IRQ_DIS0) - -#define READ_Y (ADC_ON_12BIT | TSC2007_MEASURE_Y) -#define READ_Z1 (ADC_ON_12BIT | TSC2007_MEASURE_Z1) -#define READ_Z2 (ADC_ON_12BIT | TSC2007_MEASURE_Z2) -#define READ_X (ADC_ON_12BIT | TSC2007_MEASURE_X) -#define PWRDOWN (TSC2007_12BIT | TSC2007_POWER_OFF_IRQ_EN) - -struct ts_event { -u16 x; -u16 y; -u16 z1, z2; -}; - -struct tsc2007 { -struct input_dev *input; -char phys[32 ]; - -struct i2c_client *client; - -u16 model; -u16 x_plate_ohms; - -struct touchscreen_properties prop; - -bool report_resistance; -u16 min_x; -u16 min_y; -u16 max_x; -u16 max_y; -u16 max_rt; -unsigned long poll_period;/* in jiffies */ -int fuzzx; -int fuzzy; -int fuzzz; - -unsigned gpio; -int irq; - -wait_queue_head_t wait; -bool stopped; +#include "tsc2007.h" -int (*get_pendown_state)(struct device *); -void (*clear_penirq)(void ); -}; -static inline int tsc2007_xfer (struct tsc2007 *tsc,u8 cmd) +int tsc2007_xfer (struct tsc2007 *tsc,u8 cmd) {s32 data;u16 val;@@ -137,7 +69,7 @@ static void tsc2007_read_values(struct tsc2007 *tsc, struct ts_event *tc)tsc2007_xfer (tsc ,PWRDOWN ); } -static u32 tsc2007_calculate_resistance (struct tsc2007 *tsc, +u32 tsc2007_calculate_resistance (struct tsc2007 *tsc,struct ts_event *tc) {u32 rt = 0;drivers/input/touchscreen/tsc2007_core.c renamed from drivers/input/touchscreen/tsc2007.c +1
-1@@ -158,7 +90,7 @@ static u32 tsc2007_calculate_resistance(structtsc2007 *tsc, return rt; } -static bool tsc2007_is_pen_down (struct tsc2007 *ts) +bool tsc2007_is_pen_down (struct tsc2007 *ts) {/* * NOTE: We can't rely on the pressure to determine the pen down
drivers/input/touchscreen/tsc2007_core.c renamed from drivers/input/touchscreen/tsc2007.c +5
-1@@ -191,7 +123,10 @@ static irqreturn_t tsc2007_soft_irq(int irq, void *handle)while (!ts->stopped &&tsc2007_is_pen_down (ts)) {/* pen is down, continue with the measurement */ + +mutex_lock (&ts->mlock);tsc2007_read_values (ts, &tc); +mutex_unlock (&ts->mlock); rt =tsc2007_calculate_resistance (ts, &tc);@@ -441,7 +376,8 @@ static void tsc2007_call_exit_platform_hw(void *data)static int tsc2007_probe (struct i2c_client *client,const struct i2c_device_id *id) { -const struct tsc2007_platform_data *pdata =dev_get_platdata (&client->dev); +const struct tsc2007_platform_data *pdata = +dev_get_platdata (&client->dev);struct tsc2007 *ts;struct input_dev *input_dev; int err;drivers/input/touchscreen/tsc2007_core.c renamed from drivers/input/touchscreen/tsc2007.c +12
-1@@ -463,7 +399,9 @@ static int tsc2007_probe(struct i2c_client *client, ts->client = client; ts->irq = client->irq; ts->input = input_dev; +init_waitqueue_head (&ts->wait); +mutex_init (&ts->mlock);snprintf (ts->phys,sizeof (ts->phys),"%s/input0" ,dev_name (&client->dev));@@ -534,7 +472,7 @@ static int tsc2007_probe(struct i2c_client *client,if (err <0 ) {dev_err (&client->dev,"Failed to setup chip: %d\n" , err); -return err;/* usually, chip does not respond */ +return err;/* chip does not respond */ } err =input_register_device (input_dev);@@ -544,6 +482,14 @@ static int tsc2007_probe(struct i2c_client *client, return err; } +return tsc2007_iio_configure (ts); +} + +static int tsc2007_remove (struct i2c_client *client) +{ +struct tsc2007 *ts =i2c_get_clientdata (client); + +tsc2007_iio_unconfigure (ts);return 0 ; }@@ -569,6 +515,7 @@ static struct i2c_driver tsc2007_driver = { }, .id_table = tsc2007_idtable, .probe = tsc2007_probe, + .remove = tsc2007_remove, };module_i2c_driver (tsc2007_driver);drivers/input/touchscreen/tsc2007_iio.c new file +5
-0@@ -0,0 +1,150 @@ +/* +* Copyright (c) 2016 Golden Delicious Comp. GmbH&Co. KG +* Nikolaus Schaller <[email protected]> +* +* This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */drivers/input/touchscreen/tsc2007_iio.c new file +26
-0+ +#include <linux/i2c.h> +#include <linux/iio/iio.h> +#include "tsc2007.h" + +struct tsc2007_iio { +struct tsc2007 *ts; +}; + +#define TSC2007_CHAN_IIO (_chan, _name, _type, _chan_info) \ +{ \ + .datasheet_name = _name, \ + .type = _type, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(_chan_info), \ + .indexed = 1, \ + .channel = _chan, \ +} + +static const struct iio_chan_spec tsc2007_iio_channel[] = { +TSC2007_CHAN_IIO (0 ,"x" ,IIO_VOLTAGE ,IIO_CHAN_INFO_RAW ), +TSC2007_CHAN_IIO (1 ,"y" ,IIO_VOLTAGE ,IIO_CHAN_INFO_RAW ), +TSC2007_CHAN_IIO (2 ,"z1" ,IIO_VOLTAGE ,IIO_CHAN_INFO_RAW ), +TSC2007_CHAN_IIO (3 ,"z2" ,IIO_VOLTAGE ,IIO_CHAN_INFO_RAW ), +TSC2007_CHAN_IIO (4 ,"adc" ,IIO_VOLTAGE ,IIO_CHAN_INFO_RAW ), +TSC2007_CHAN_IIO (5 ,"rt" ,IIO_VOLTAGE ,IIO_CHAN_INFO_RAW ),/* Ohms? */
drivers/input/touchscreen/tsc2007_iio.c new file +116
-0+TSC2007_CHAN_IIO (6 ,"pen" ,IIO_PRESSURE ,IIO_CHAN_INFO_RAW ), +TSC2007_CHAN_IIO (7 ,"temp0" ,IIO_TEMP ,IIO_CHAN_INFO_RAW ), + TSC2007_CHAN_IIO(8, "temp1", IIO_TEMP, IIO_CHAN_INFO_RAW), +}; + +static int tsc2007_read_raw (struct iio_dev *indio_dev, +struct iio_chan_spec const *chan,int *val,int *val2,long mask) +{ +struct tsc2007_iio *iio =iio_priv (indio_dev); +struct tsc2007 *tsc = iio->ts; +int adc_chan = chan->channel; +int ret =0 ; + +if (adc_chan >=ARRAY_SIZE (tsc2007_iio_channel)) +return -EINVAL ; + +if (mask !=IIO_CHAN_INFO_RAW ) +return -EINVAL ; + +mutex_lock (&tsc->mlock); + +switch (chan->channel) { +case 0 : + *val =tsc2007_xfer (tsc,READ_X ); +break ; +case 1 : + *val =tsc2007_xfer (tsc,READ_Y ); +break ; +case 2 : + *val =tsc2007_xfer (tsc,READ_Z1 ); +break ; +case 3 : + *val =tsc2007_xfer (tsc,READ_Z2 ); +break ; +case 4 : + *val =tsc2007_xfer (tsc, (ADC_ON_12BIT |TSC2007_MEASURE_AUX )); +break ; +case 5 : { +struct ts_event tc; + + tc.x =tsc2007_xfer (tsc,READ_X ); + tc.z1 =tsc2007_xfer (tsc,READ_Z1 ); + tc.z2 =tsc2007_xfer (tsc,READ_Z2 ); + *val =tsc2007_calculate_resistance (tsc, &tc); +break ; + } +case 6 : + *val =tsc2007_is_pen_down (tsc); +break ; +case 7 : + *val =tsc2007_xfer (tsc, + (ADC_ON_12BIT |TSC2007_MEASURE_TEMP0 )); +break ; +case 8 : + *val =tsc2007_xfer (tsc, + (ADC_ON_12BIT |TSC2007_MEASURE_TEMP1 )); +break ; + } + +/* Prepare for next touch reading - power down ADC, enable PENIRQ */ +tsc2007_xfer (tsc,PWRDOWN ); + +mutex_unlock (&tsc->mlock); + + ret =IIO_VAL_INT ; + +return ret; +} + +static const struct iio_info tsc2007_iio_info = { + .read_raw = tsc2007_read_raw, + .driver_module =THIS_MODULE , +}; + +int tsc2007_iio_configure (struct tsc2007 *ts) +{ +int err; +struct iio_dev *indio_dev; +struct tsc2007_iio *iio; + + indio_dev =devm_iio_device_alloc (&ts->client->dev, +sizeof (struct tsc2007_iio )); +if (!indio_dev) { +dev_err (&ts->client->dev,"iio_device_alloc failed\n" ); +return -ENOMEM ; + } + + iio =iio_priv (indio_dev); + iio->ts = ts; + ts->iio_dev = (void *) indio_dev; + + indio_dev->name ="tsc2007" ; + indio_dev->dev.parent = &ts->client->dev; + indio_dev->info = &tsc2007_iio_info; + indio_dev->modes =INDIO_DIRECT_MODE ; + indio_dev->channels = tsc2007_iio_channel; + indio_dev->num_channels =ARRAY_SIZE (tsc2007_iio_channel); + + err =iio_device_register (indio_dev); +if (err <0 ) { +dev_err (&ts->client->dev,"iio_device_register() failed: %d\n" , + err); +return err; + } + +return 0 ; +} +EXPORT_SYMBOL (tsc2007_iio_configure); + +void tsc2007_iio_unconfigure (struct tsc2007 *ts) +{ +struct iio_dev *indio_dev = ts->iio_dev; + +iio_device_unregister (indio_dev); +} +EXPORT_SYMBOL (tsc2007_iio_unconfigure);
Signature · 5 lines
Sent from my Android device with K-9 Mail. Please excuse my brevity. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH v8 3/8] drivers:input:tsc2007: add iio interface to read external ADC input and temperature
Quoted 59 lines
Am 24.11.2016 um 18:38 schrieb Jonathan Cameron <jic23-tko9wxEg+fIOOJlXag/[email protected]>:
Quoted 44 lines · H. Nikolaus Schaller
The tsc2007 chip not only has a resistive touch screen controller but also an external AUX adc imput which can be used for an ambient light sensor, battery voltage monitoring or any general purpose.
Additionally it can measure the chip temperature.
This extension provides an iio interface for these adc channels.
Since it is not wasting much resources and is very straightforward, we simply provide all other adc channels as optional iio interfaces as weel. This can be used for debugging or special applications.
This patch also splits the tsc2007 driver in several source files:
tsc2007.h-- constants, structs and stubstsc2007_core.c-- functional parts of the original drivertsc2007_iio.c-- the optional iio stuff
Makefilemagic allows to conditionally link the iio stuff ifCONFIG_IIO=yor =m in a way that it works withCONFIG_TOUCHSCREEN_TSC2007=m.Signed-off-by H. Nikolaus Schaller <[email protected]>Reviewed-by Jonathan Cameron <[email protected]>---
drivers/input/touchscreen/Makefile| 7 +drivers/input/touchscreen/tsc2007.h| 116
++++++++++++++++.../touchscreen/{tsc2007.c=>tsc2007_core.c} | 95 +++----------drivers/input/touchscreen/tsc2007_iio.c| 150
+++++++++++++++++++++4 files changed, 294 insertions(+), 74 deletions(-)create mode 100644
drivers/input/touchscreen/tsc2007.hrenamedrivers/input/touchscreen/{tsc2007.c=>tsc2007_core.c} (86%) create mode 100644drivers/input/touchscreen/tsc2007_iio.cdrivers/input/touchscreen/Makefile +0
-0@@ -80,6 +80,13 @@ obj-$(CONFIG_TOUCHSCREEN_TSC_SERIO) += tsc40.oobj-$(CONFIG_TOUCHSCREEN_TSC200X_CORE) += tsc200x-core.o
obj-$(CONFIG_TOUCHSCREEN_TSC2004) += tsc2004.o
obj-$(CONFIG_TOUCHSCREEN_TSC2005) += tsc2005.odrivers/input/touchscreen/Makefile obj-$(CONFIG_TOUCHSCREEN_TSC_SERIO) += tsc40.o · line 88
Quoted 6 lines
drivers/input/touchscreen/Makefile +6
-0+tsc2007-y := tsc2007_core.o +ifeq ($(CONFIG_IIO),y) +tsc2007-y += tsc2007_iio.o +endif +ifeq ($(CONFIG_IIO),m) +tsc2007-y += tsc2007_iio.oNot tsc2007-m ?
Quoted 1 line
I don't follow how this works!
I guess tsc2007-y is an internal collector variable name for multiple .o components. Sort of a "library" object.
While
obj-y += tsc2007.o adds it to the kernel
obj-m += tsc2007.o adds it to the modules
I am not sure if my explanation is correct but it appears to work that way.
Anyways what shall we do? If CONFIG_TOUCHSCREEN_TSC2007=y and IIO=m we have a problem that we need dynamic binding.
Quoted 467 lines
Quoted 464 lines
+endif
obj-$(CONFIG_TOUCHSCREEN_TSC2007) += tsc2007.o
obj-$(CONFIG_TOUCHSCREEN_UCB1400) += ucb1400_ts.o
obj-$(CONFIG_TOUCHSCREEN_WACOM_W8001) += wacom_w8001.odrivers/input/touchscreen/tsc2007.h new file +16
-0@@ -0,0 +1,116 @@ +/* +* Copyright (c) 2008 MtekVision Co., Ltd. +* Kwangwoo Lee <kwlee-ec7hoAtq5SbSUeElwK9/[email protected]> +* +* Using code from: +* - ads7846.c +* Copyright (c) 2005 David Brownell +* Copyright (c) 2006 Nokia Corporation +* - corgi_ts.c +* Copyright (C) 2004-2005 Richard Purdie +* - omap_ts.[hc], ads7846.h, ts_osk.c +* Copyright (C) 2002 MontaVista Software +* Copyright (C) 2004 Texas Instruments +* Copyright (C) 2005 Dirk Behme +* +* This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */drivers/input/touchscreen/tsc2007.h new file +97
-0+ +#include <linux/input/touchscreen.h> + +#define TSC2007_MEASURE_TEMP0 (0x0 << 4) +#define TSC2007_MEASURE_AUX (0x2 << 4) +#define TSC2007_MEASURE_TEMP1 (0x4 << 4) +#define TSC2007_ACTIVATE_XN (0x8 << 4) +#define TSC2007_ACTIVATE_YN (0x9 << 4) +#define TSC2007_ACTIVATE_YP_XN (0xa << 4) +#define TSC2007_SETUP (0xb << 4) +#define TSC2007_MEASURE_X (0xc << 4) +#define TSC2007_MEASURE_Y (0xd << 4) +#define TSC2007_MEASURE_Z1 (0xe << 4) +#define TSC2007_MEASURE_Z2 (0xf << 4) + +#define TSC2007_POWER_OFF_IRQ_EN (0x0 << 2) +#define TSC2007_ADC_ON_IRQ_DIS0 (0x1 << 2) +#define TSC2007_ADC_OFF_IRQ_EN (0x2 << 2) +#define TSC2007_ADC_ON_IRQ_DIS1 (0x3 << 2) + +#define TSC2007_12BIT (0x0 << 1) +#define TSC2007_8BIT (0x1 << 1) + +#define MAX_12BIT ((1 << 12) - 1) + +#define ADC_ON_12BIT (TSC2007_12BIT | TSC2007_ADC_ON_IRQ_DIS0) + +#define READ_Y (ADC_ON_12BIT | TSC2007_MEASURE_Y) +#define READ_Z1 (ADC_ON_12BIT | TSC2007_MEASURE_Z1) +#define READ_Z2 (ADC_ON_12BIT | TSC2007_MEASURE_Z2) +#define READ_X (ADC_ON_12BIT | TSC2007_MEASURE_X) +#define PWRDOWN (TSC2007_12BIT | TSC2007_POWER_OFF_IRQ_EN) + +struct ts_event { +u16 x; +u16 y; +u16 z1, z2; +}; + +struct tsc2007 { +struct input_dev *input; +char phys[32 ]; + +struct i2c_client *client; + +u16 model; +u16 x_plate_ohms; + +struct touchscreen_properties prop; + +bool report_resistance; +u16 min_x; +u16 min_y; +u16 max_x; +u16 max_y; +u16 max_rt; +unsigned long poll_period;/* in jiffies */ +int fuzzx; +int fuzzy; +int fuzzz; + +unsigned int gpio; +int irq; + +wait_queue_head_t wait; +bool stopped; +bool pendown; + +int (*get_pendown_state)(struct device *); +void (*clear_penirq)(void ); + +struct mutex mlock; +struct iio_dev *iio_dev;/* optional */ +}; + +int tsc2007_xfer (struct tsc2007 *tsc,u8 cmd); +u32 tsc2007_calculate_resistance (struct tsc2007 *tsc, +struct ts_event *tc); +bool tsc2007_is_pen_down (struct tsc2007 *ts); + +#if IS_ENABLED (CONFIG_IIO ) + +/* defined in tsc2007_iio.c */ +int tsc2007_iio_configure (struct tsc2007 *ts); +void tsc2007_iio_unconfigure (struct tsc2007 *ts); + +#else /* CONFIG_IIO */ + +static inline int tsc2007_iio_configure (struct tsc2007 *ts) +{ +return 0 ; +} +static inline void tsc2007_iio_unconfigure (struct tsc2007 *ts) +{ +} + +#endif /* CONFIG_IIO */ drivers/input/touchscreen/tsc2007_core.c renamed from drivers/input/touchscreen/tsc2007.c +3
-71@@ -27,79 +27,11 @@#include <linux/i2c.h> #include <linux/i2c/tsc2007.h> #include <linux/of_device.h> -#include <linux/of.h> #include <linux/of_gpio.h> -#include <linux/input/touchscreen.h> - -#define TSC2007_MEASURE_TEMP0 (0x0 << 4) -#define TSC2007_MEASURE_AUX (0x2 << 4) -#define TSC2007_MEASURE_TEMP1 (0x4 << 4) -#define TSC2007_ACTIVATE_XN (0x8 << 4) -#define TSC2007_ACTIVATE_YN (0x9 << 4) -#define TSC2007_ACTIVATE_YP_XN (0xa << 4) -#define TSC2007_SETUP (0xb << 4) -#define TSC2007_MEASURE_X (0xc << 4) -#define TSC2007_MEASURE_Y (0xd << 4) -#define TSC2007_MEASURE_Z1 (0xe << 4) -#define TSC2007_MEASURE_Z2 (0xf << 4) - -#define TSC2007_POWER_OFF_IRQ_EN (0x0 << 2) -#define TSC2007_ADC_ON_IRQ_DIS0 (0x1 << 2) -#define TSC2007_ADC_OFF_IRQ_EN (0x2 << 2) -#define TSC2007_ADC_ON_IRQ_DIS1 (0x3 << 2) - -#define TSC2007_12BIT (0x0 << 1) -#define TSC2007_8BIT (0x1 << 1) - -#define MAX_12BIT ((1 << 12) - 1) - -#define ADC_ON_12BIT (TSC2007_12BIT | TSC2007_ADC_ON_IRQ_DIS0) - -#define READ_Y (ADC_ON_12BIT | TSC2007_MEASURE_Y) -#define READ_Z1 (ADC_ON_12BIT | TSC2007_MEASURE_Z1) -#define READ_Z2 (ADC_ON_12BIT | TSC2007_MEASURE_Z2) -#define READ_X (ADC_ON_12BIT | TSC2007_MEASURE_X) -#define PWRDOWN (TSC2007_12BIT | TSC2007_POWER_OFF_IRQ_EN) - -struct ts_event { -u16 x; -u16 y; -u16 z1, z2; -}; - -struct tsc2007 { -struct input_dev *input; -char phys[32 ]; - -struct i2c_client *client; - -u16 model; -u16 x_plate_ohms; - -struct touchscreen_properties prop; - -bool report_resistance; -u16 min_x; -u16 min_y; -u16 max_x; -u16 max_y; -u16 max_rt; -unsigned long poll_period;/* in jiffies */ -int fuzzx; -int fuzzy; -int fuzzz; - -unsigned gpio; -int irq; - -wait_queue_head_t wait; -bool stopped; +#include "tsc2007.h" -int (*get_pendown_state)(struct device *); -void (*clear_penirq)(void ); -}; -static inline int tsc2007_xfer (struct tsc2007 *tsc,u8 cmd) +int tsc2007_xfer (struct tsc2007 *tsc,u8 cmd) {s32 data;u16 val;@@ -137,7 +69,7 @@ static void tsc2007_read_values(struct tsc2007 *tsc, struct ts_event *tc)tsc2007_xfer (tsc ,PWRDOWN ); } -static u32 tsc2007_calculate_resistance (struct tsc2007 *tsc, +u32 tsc2007_calculate_resistance (struct tsc2007 *tsc,struct ts_event *tc) {u32 rt = 0;drivers/input/touchscreen/tsc2007_core.c renamed from drivers/input/touchscreen/tsc2007.c +1
-1@@ -158,7 +90,7 @@ static u32 tsc2007_calculate_resistance(structtsc2007 *tsc, return rt; } -static bool tsc2007_is_pen_down (struct tsc2007 *ts) +bool tsc2007_is_pen_down (struct tsc2007 *ts) {/* * NOTE: We can't rely on the pressure to determine the pen down
drivers/input/touchscreen/tsc2007_core.c renamed from drivers/input/touchscreen/tsc2007.c +5
-1@@ -191,7 +123,10 @@ static irqreturn_t tsc2007_soft_irq(int irq, void *handle)while (!ts->stopped &&tsc2007_is_pen_down (ts)) {/* pen is down, continue with the measurement */ + +mutex_lock (&ts->mlock);tsc2007_read_values (ts, &tc); +mutex_unlock (&ts->mlock); rt =tsc2007_calculate_resistance (ts, &tc);@@ -441,7 +376,8 @@ static void tsc2007_call_exit_platform_hw(void *data)static int tsc2007_probe (struct i2c_client *client,const struct i2c_device_id *id) { -const struct tsc2007_platform_data *pdata =dev_get_platdata (&client->dev); +const struct tsc2007_platform_data *pdata = +dev_get_platdata (&client->dev);struct tsc2007 *ts;struct input_dev *input_dev; int err;drivers/input/touchscreen/tsc2007_core.c renamed from drivers/input/touchscreen/tsc2007.c +12
-1@@ -463,7 +399,9 @@ static int tsc2007_probe(struct i2c_client *client, ts->client = client; ts->irq = client->irq; ts->input = input_dev; +init_waitqueue_head (&ts->wait); +mutex_init (&ts->mlock);snprintf (ts->phys,sizeof (ts->phys),"%s/input0" ,dev_name (&client->dev));@@ -534,7 +472,7 @@ static int tsc2007_probe(struct i2c_client *client,if (err <0 ) {dev_err (&client->dev,"Failed to setup chip: %d\n" , err); -return err;/* usually, chip does not respond */ +return err;/* chip does not respond */ } err =input_register_device (input_dev);@@ -544,6 +482,14 @@ static int tsc2007_probe(struct i2c_client *client, return err; } +return tsc2007_iio_configure (ts); +} + +static int tsc2007_remove (struct i2c_client *client) +{ +struct tsc2007 *ts =i2c_get_clientdata (client); + +tsc2007_iio_unconfigure (ts);return 0 ; }@@ -569,6 +515,7 @@ static struct i2c_driver tsc2007_driver = { }, .id_table = tsc2007_idtable, .probe = tsc2007_probe, + .remove = tsc2007_remove, };module_i2c_driver (tsc2007_driver);drivers/input/touchscreen/tsc2007_iio.c new file +5
-0@@ -0,0 +1,150 @@ +/* +* Copyright (c) 2016 Golden Delicious Comp. GmbH&Co. KG +* Nikolaus Schaller <[email protected]> +* +* This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */drivers/input/touchscreen/tsc2007_iio.c new file +26
-0+ +#include <linux/i2c.h> +#include <linux/iio/iio.h> +#include "tsc2007.h" + +struct tsc2007_iio { +struct tsc2007 *ts; +}; + +#define TSC2007_CHAN_IIO (_chan, _name, _type, _chan_info) \ +{ \ + .datasheet_name = _name, \ + .type = _type, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(_chan_info), \ + .indexed = 1, \ + .channel = _chan, \ +} + +static const struct iio_chan_spec tsc2007_iio_channel[] = { +TSC2007_CHAN_IIO (0 ,"x" ,IIO_VOLTAGE ,IIO_CHAN_INFO_RAW ), +TSC2007_CHAN_IIO (1 ,"y" ,IIO_VOLTAGE ,IIO_CHAN_INFO_RAW ), +TSC2007_CHAN_IIO (2 ,"z1" ,IIO_VOLTAGE ,IIO_CHAN_INFO_RAW ), +TSC2007_CHAN_IIO (3 ,"z2" ,IIO_VOLTAGE ,IIO_CHAN_INFO_RAW ), +TSC2007_CHAN_IIO (4 ,"adc" ,IIO_VOLTAGE ,IIO_CHAN_INFO_RAW ), +TSC2007_CHAN_IIO (5 ,"rt" ,IIO_VOLTAGE ,IIO_CHAN_INFO_RAW ),/* Ohms? */
drivers/input/touchscreen/tsc2007_iio.c new file +116
-0+TSC2007_CHAN_IIO (6 ,"pen" ,IIO_PRESSURE ,IIO_CHAN_INFO_RAW ), +TSC2007_CHAN_IIO (7 ,"temp0" ,IIO_TEMP ,IIO_CHAN_INFO_RAW ), + TSC2007_CHAN_IIO(8, "temp1", IIO_TEMP, IIO_CHAN_INFO_RAW), +}; + +static int tsc2007_read_raw (struct iio_dev *indio_dev, +struct iio_chan_spec const *chan,int *val,int *val2,long mask) +{ +struct tsc2007_iio *iio =iio_priv (indio_dev); +struct tsc2007 *tsc = iio->ts; +int adc_chan = chan->channel; +int ret =0 ; + +if (adc_chan >=ARRAY_SIZE (tsc2007_iio_channel)) +return -EINVAL ; + +if (mask !=IIO_CHAN_INFO_RAW ) +return -EINVAL ; + +mutex_lock (&tsc->mlock); + +switch (chan->channel) { +case 0 : + *val =tsc2007_xfer (tsc,READ_X ); +break ; +case 1 : + *val =tsc2007_xfer (tsc,READ_Y ); +break ; +case 2 : + *val =tsc2007_xfer (tsc,READ_Z1 ); +break ; +case 3 : + *val =tsc2007_xfer (tsc,READ_Z2 ); +break ; +case 4 : + *val =tsc2007_xfer (tsc, (ADC_ON_12BIT |TSC2007_MEASURE_AUX )); +break ; +case 5 : { +struct ts_event tc; + + tc.x =tsc2007_xfer (tsc,READ_X ); + tc.z1 =tsc2007_xfer (tsc,READ_Z1 ); + tc.z2 =tsc2007_xfer (tsc,READ_Z2 ); + *val =tsc2007_calculate_resistance (tsc, &tc); +break ; + } +case 6 : + *val =tsc2007_is_pen_down (tsc); +break ; +case 7 : + *val =tsc2007_xfer (tsc, + (ADC_ON_12BIT |TSC2007_MEASURE_TEMP0 )); +break ; +case 8 : + *val =tsc2007_xfer (tsc, + (ADC_ON_12BIT |TSC2007_MEASURE_TEMP1 )); +break ; + } + +/* Prepare for next touch reading - power down ADC, enable PENIRQ */ +tsc2007_xfer (tsc,PWRDOWN ); + +mutex_unlock (&tsc->mlock); + + ret =IIO_VAL_INT ; + +return ret; +} + +static const struct iio_info tsc2007_iio_info = { + .read_raw = tsc2007_read_raw, + .driver_module =THIS_MODULE , +}; + +int tsc2007_iio_configure (struct tsc2007 *ts) +{ +int err; +struct iio_dev *indio_dev; +struct tsc2007_iio *iio; + + indio_dev =devm_iio_device_alloc (&ts->client->dev, +sizeof (struct tsc2007_iio )); +if (!indio_dev) { +dev_err (&ts->client->dev,"iio_device_alloc failed\n" ); +return -ENOMEM ; + } + + iio =iio_priv (indio_dev); + iio->ts = ts; + ts->iio_dev = (void *) indio_dev; + + indio_dev->name ="tsc2007" ; + indio_dev->dev.parent = &ts->client->dev; + indio_dev->info = &tsc2007_iio_info; + indio_dev->modes =INDIO_DIRECT_MODE ; + indio_dev->channels = tsc2007_iio_channel; + indio_dev->num_channels =ARRAY_SIZE (tsc2007_iio_channel); + + err =iio_device_register (indio_dev); +if (err <0 ) { +dev_err (&ts->client->dev,"iio_device_register() failed: %d\n" , + err); +return err; + } + +return 0 ; +} +EXPORT_SYMBOL (tsc2007_iio_configure); + +void tsc2007_iio_unconfigure (struct tsc2007 *ts) +{ +struct iio_dev *indio_dev = ts->iio_dev; + +iio_device_unregister (indio_dev); +} +EXPORT_SYMBOL (tsc2007_iio_unconfigure);Signature · 1 line
Sent from my Android device with K-9 Mail. Please excuse my brevity.
Jonathan Cameron
maintainerRe: [PATCH v8 3/8] drivers:input:tsc2007: add iio interface to read external ADC input and temperature
Quoted 66 lines · H. Nikolaus Schaller
Quoted 59 lines
Am 24.11.2016 um 18:38 schrieb Jonathan Cameron <jic23-tko9wxEg+fIOOJlXag/[email protected]>:
Quoted 44 lines · H. Nikolaus Schaller
The tsc2007 chip not only has a resistive touch screen controller but also an external AUX adc imput which can be used for an ambient light sensor, battery voltage monitoring or any general purpose.
Additionally it can measure the chip temperature.
This extension provides an iio interface for these adc channels.
Since it is not wasting much resources and is very straightforward, we simply provide all other adc channels as optional iio interfaces as weel. This can be used for debugging or special applications.
This patch also splits the tsc2007 driver in several source files:
tsc2007.h-- constants, structs and stubstsc2007_core.c-- functional parts of the original drivertsc2007_iio.c-- the optional iio stuff
Makefilemagic allows to conditionally link the iio stuff ifCONFIG_IIO=yor =m in a way that it works withCONFIG_TOUCHSCREEN_TSC2007=m.Signed-off-by H. Nikolaus Schaller <[email protected]>Reviewed-by Jonathan Cameron <[email protected]>---
drivers/input/touchscreen/Makefile| 7 +drivers/input/touchscreen/tsc2007.h| 116
++++++++++++++++.../touchscreen/{tsc2007.c=>tsc2007_core.c} | 95 +++----------drivers/input/touchscreen/tsc2007_iio.c| 150
+++++++++++++++++++++4 files changed, 294 insertions(+), 74 deletions(-)create mode 100644
drivers/input/touchscreen/tsc2007.hrenamedrivers/input/touchscreen/{tsc2007.c=>tsc2007_core.c} (86%) create mode 100644drivers/input/touchscreen/tsc2007_iio.cdrivers/input/touchscreen/Makefile +0
-0@@ -80,6 +80,13 @@ obj-$(CONFIG_TOUCHSCREEN_TSC_SERIO) += tsc40.oobj-$(CONFIG_TOUCHSCREEN_TSC200X_CORE) += tsc200x-core.o
obj-$(CONFIG_TOUCHSCREEN_TSC2004) += tsc2004.o
obj-$(CONFIG_TOUCHSCREEN_TSC2005) += tsc2005.odrivers/input/touchscreen/Makefile obj-$(CONFIG_TOUCHSCREEN_TSC_SERIO) += tsc40.o · line 88
Quoted 6 lines
drivers/input/touchscreen/Makefile +6
-0+tsc2007-y := tsc2007_core.o +ifeq ($(CONFIG_IIO),y) +tsc2007-y += tsc2007_iio.o +endif +ifeq ($(CONFIG_IIO),m) +tsc2007-y += tsc2007_iio.oNot tsc2007-m ?
Quoted 1 line
I don't follow how this works!
I guess tsc2007-y is an internal collector variable name for multiple .o components. Sort of a "library" object.
While
Quoted 8 lines
obj-y += tsc2007.o adds it to the kernel
obj-m += tsc2007.o adds it to the modulesI am not sure if my explanation is correct but it appears to work that way.
Anyways what shall we do? If
CONFIG_TOUCHSCREEN_TSC2007=yand IIO=m we have a problem that we need dynamic binding.
Yes, we just need to block that particular combination. Only build in the IIO support if it is also built in. That's way I thought we'd want to add it tsc2007-m which would only be used if tsc2007 as a whole was built as a module.
Otherwise it would be ignored (I think!)
I'm not seeing this structure anywhere else in kernel - hence cc'd Yann and the Kbuild list to see if they can offer some advices.
As a quick summary, we are looking to add IIO support to this driver in the following circumstances.
IIO and this driver are modules. (ideally handling the dependencies nicely) IIO and this driver are both built in.
Problem case is driver built in and IIO as a module.
Jonathan
Quoted 469 lines
Quoted 468 lines
Quoted 465 lines
+endif
obj-$(CONFIG_TOUCHSCREEN_TSC2007) += tsc2007.o
obj-$(CONFIG_TOUCHSCREEN_UCB1400) += ucb1400_ts.o
obj-$(CONFIG_TOUCHSCREEN_WACOM_W8001) += wacom_w8001.odrivers/input/touchscreen/tsc2007.h new file +16
-0@@ -0,0 +1,116 @@ +/* +* Copyright (c) 2008 MtekVision Co., Ltd. +* Kwangwoo Lee <kwlee-ec7hoAtq5SbSUeElwK9/[email protected]> +* +* Using code from: +* - ads7846.c +* Copyright (c) 2005 David Brownell +* Copyright (c) 2006 Nokia Corporation +* - corgi_ts.c +* Copyright (C) 2004-2005 Richard Purdie +* - omap_ts.[hc], ads7846.h, ts_osk.c +* Copyright (C) 2002 MontaVista Software +* Copyright (C) 2004 Texas Instruments +* Copyright (C) 2005 Dirk Behme +* +* This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */drivers/input/touchscreen/tsc2007.h new file +97
-0+ +#include <linux/input/touchscreen.h> + +#define TSC2007_MEASURE_TEMP0 (0x0 << 4) +#define TSC2007_MEASURE_AUX (0x2 << 4) +#define TSC2007_MEASURE_TEMP1 (0x4 << 4) +#define TSC2007_ACTIVATE_XN (0x8 << 4) +#define TSC2007_ACTIVATE_YN (0x9 << 4) +#define TSC2007_ACTIVATE_YP_XN (0xa << 4) +#define TSC2007_SETUP (0xb << 4) +#define TSC2007_MEASURE_X (0xc << 4) +#define TSC2007_MEASURE_Y (0xd << 4) +#define TSC2007_MEASURE_Z1 (0xe << 4) +#define TSC2007_MEASURE_Z2 (0xf << 4) + +#define TSC2007_POWER_OFF_IRQ_EN (0x0 << 2) +#define TSC2007_ADC_ON_IRQ_DIS0 (0x1 << 2) +#define TSC2007_ADC_OFF_IRQ_EN (0x2 << 2) +#define TSC2007_ADC_ON_IRQ_DIS1 (0x3 << 2) + +#define TSC2007_12BIT (0x0 << 1) +#define TSC2007_8BIT (0x1 << 1) + +#define MAX_12BIT ((1 << 12) - 1) + +#define ADC_ON_12BIT (TSC2007_12BIT | TSC2007_ADC_ON_IRQ_DIS0) + +#define READ_Y (ADC_ON_12BIT | TSC2007_MEASURE_Y) +#define READ_Z1 (ADC_ON_12BIT | TSC2007_MEASURE_Z1) +#define READ_Z2 (ADC_ON_12BIT | TSC2007_MEASURE_Z2) +#define READ_X (ADC_ON_12BIT | TSC2007_MEASURE_X) +#define PWRDOWN (TSC2007_12BIT | TSC2007_POWER_OFF_IRQ_EN) + +struct ts_event { +u16 x; +u16 y; +u16 z1, z2; +}; + +struct tsc2007 { +struct input_dev *input; +char phys[32 ]; + +struct i2c_client *client; + +u16 model; +u16 x_plate_ohms; + +struct touchscreen_properties prop; + +bool report_resistance; +u16 min_x; +u16 min_y; +u16 max_x; +u16 max_y; +u16 max_rt; +unsigned long poll_period;/* in jiffies */ +int fuzzx; +int fuzzy; +int fuzzz; + +unsigned int gpio; +int irq; + +wait_queue_head_t wait; +bool stopped; +bool pendown; + +int (*get_pendown_state)(struct device *); +void (*clear_penirq)(void ); + +struct mutex mlock; +struct iio_dev *iio_dev;/* optional */ +}; + +int tsc2007_xfer (struct tsc2007 *tsc,u8 cmd); +u32 tsc2007_calculate_resistance (struct tsc2007 *tsc, +struct ts_event *tc); +bool tsc2007_is_pen_down (struct tsc2007 *ts); + +#if IS_ENABLED (CONFIG_IIO ) + +/* defined in tsc2007_iio.c */ +int tsc2007_iio_configure (struct tsc2007 *ts); +void tsc2007_iio_unconfigure (struct tsc2007 *ts); + +#else /* CONFIG_IIO */ + +static inline int tsc2007_iio_configure (struct tsc2007 *ts) +{ +return 0 ; +} +static inline void tsc2007_iio_unconfigure (struct tsc2007 *ts) +{ +} + +#endif /* CONFIG_IIO */ drivers/input/touchscreen/tsc2007_core.c renamed from drivers/input/touchscreen/tsc2007.c +3
-71@@ -27,79 +27,11 @@#include <linux/i2c.h> #include <linux/i2c/tsc2007.h> #include <linux/of_device.h> -#include <linux/of.h> #include <linux/of_gpio.h> -#include <linux/input/touchscreen.h> - -#define TSC2007_MEASURE_TEMP0 (0x0 << 4) -#define TSC2007_MEASURE_AUX (0x2 << 4) -#define TSC2007_MEASURE_TEMP1 (0x4 << 4) -#define TSC2007_ACTIVATE_XN (0x8 << 4) -#define TSC2007_ACTIVATE_YN (0x9 << 4) -#define TSC2007_ACTIVATE_YP_XN (0xa << 4) -#define TSC2007_SETUP (0xb << 4) -#define TSC2007_MEASURE_X (0xc << 4) -#define TSC2007_MEASURE_Y (0xd << 4) -#define TSC2007_MEASURE_Z1 (0xe << 4) -#define TSC2007_MEASURE_Z2 (0xf << 4) - -#define TSC2007_POWER_OFF_IRQ_EN (0x0 << 2) -#define TSC2007_ADC_ON_IRQ_DIS0 (0x1 << 2) -#define TSC2007_ADC_OFF_IRQ_EN (0x2 << 2) -#define TSC2007_ADC_ON_IRQ_DIS1 (0x3 << 2) - -#define TSC2007_12BIT (0x0 << 1) -#define TSC2007_8BIT (0x1 << 1) - -#define MAX_12BIT ((1 << 12) - 1) - -#define ADC_ON_12BIT (TSC2007_12BIT | TSC2007_ADC_ON_IRQ_DIS0) - -#define READ_Y (ADC_ON_12BIT | TSC2007_MEASURE_Y) -#define READ_Z1 (ADC_ON_12BIT | TSC2007_MEASURE_Z1) -#define READ_Z2 (ADC_ON_12BIT | TSC2007_MEASURE_Z2) -#define READ_X (ADC_ON_12BIT | TSC2007_MEASURE_X) -#define PWRDOWN (TSC2007_12BIT | TSC2007_POWER_OFF_IRQ_EN) - -struct ts_event { -u16 x; -u16 y; -u16 z1, z2; -}; - -struct tsc2007 { -struct input_dev *input; -char phys[32 ]; - -struct i2c_client *client; - -u16 model; -u16 x_plate_ohms; - -struct touchscreen_properties prop; - -bool report_resistance; -u16 min_x; -u16 min_y; -u16 max_x; -u16 max_y; -u16 max_rt; -unsigned long poll_period;/* in jiffies */ -int fuzzx; -int fuzzy; -int fuzzz; - -unsigned gpio; -int irq; - -wait_queue_head_t wait; -bool stopped; +#include "tsc2007.h" -int (*get_pendown_state)(struct device *); -void (*clear_penirq)(void ); -}; -static inline int tsc2007_xfer (struct tsc2007 *tsc,u8 cmd) +int tsc2007_xfer (struct tsc2007 *tsc,u8 cmd) {s32 data;u16 val;@@ -137,7 +69,7 @@ static void tsc2007_read_values(struct tsc2007 *tsc, struct ts_event *tc)tsc2007_xfer (tsc ,PWRDOWN ); } -static u32 tsc2007_calculate_resistance (struct tsc2007 *tsc, +u32 tsc2007_calculate_resistance (struct tsc2007 *tsc,struct ts_event *tc) {u32 rt = 0;drivers/input/touchscreen/tsc2007_core.c renamed from drivers/input/touchscreen/tsc2007.c +1
-1@@ -158,7 +90,7 @@ static u32 tsc2007_calculate_resistance(structtsc2007 *tsc, return rt; } -static bool tsc2007_is_pen_down (struct tsc2007 *ts) +bool tsc2007_is_pen_down (struct tsc2007 *ts) {/* * NOTE: We can't rely on the pressure to determine the pen down
drivers/input/touchscreen/tsc2007_core.c renamed from drivers/input/touchscreen/tsc2007.c +5
-1@@ -191,7 +123,10 @@ static irqreturn_t tsc2007_soft_irq(int irq, void *handle)while (!ts->stopped &&tsc2007_is_pen_down (ts)) {/* pen is down, continue with the measurement */ + +mutex_lock (&ts->mlock);tsc2007_read_values (ts, &tc); +mutex_unlock (&ts->mlock); rt =tsc2007_calculate_resistance (ts, &tc);@@ -441,7 +376,8 @@ static void tsc2007_call_exit_platform_hw(void *data)static int tsc2007_probe (struct i2c_client *client,const struct i2c_device_id *id) { -const struct tsc2007_platform_data *pdata =dev_get_platdata (&client->dev); +const struct tsc2007_platform_data *pdata = +dev_get_platdata (&client->dev);struct tsc2007 *ts;struct input_dev *input_dev; int err;drivers/input/touchscreen/tsc2007_core.c renamed from drivers/input/touchscreen/tsc2007.c +12
-1@@ -463,7 +399,9 @@ static int tsc2007_probe(struct i2c_client *client, ts->client = client; ts->irq = client->irq; ts->input = input_dev; +init_waitqueue_head (&ts->wait); +mutex_init (&ts->mlock);snprintf (ts->phys,sizeof (ts->phys),"%s/input0" ,dev_name (&client->dev));@@ -534,7 +472,7 @@ static int tsc2007_probe(struct i2c_client *client,if (err <0 ) {dev_err (&client->dev,"Failed to setup chip: %d\n" , err); -return err;/* usually, chip does not respond */ +return err;/* chip does not respond */ } err =input_register_device (input_dev);@@ -544,6 +482,14 @@ static int tsc2007_probe(struct i2c_client *client, return err; } +return tsc2007_iio_configure (ts); +} + +static int tsc2007_remove (struct i2c_client *client) +{ +struct tsc2007 *ts =i2c_get_clientdata (client); + +tsc2007_iio_unconfigure (ts);return 0 ; }@@ -569,6 +515,7 @@ static struct i2c_driver tsc2007_driver = { }, .id_table = tsc2007_idtable, .probe = tsc2007_probe, + .remove = tsc2007_remove, };module_i2c_driver (tsc2007_driver);drivers/input/touchscreen/tsc2007_iio.c new file +5
-0@@ -0,0 +1,150 @@ +/* +* Copyright (c) 2016 Golden Delicious Comp. GmbH&Co. KG +* Nikolaus Schaller <[email protected]> +* +* This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */drivers/input/touchscreen/tsc2007_iio.c new file +26
-0+ +#include <linux/i2c.h> +#include <linux/iio/iio.h> +#include "tsc2007.h" + +struct tsc2007_iio { +struct tsc2007 *ts; +}; + +#define TSC2007_CHAN_IIO (_chan, _name, _type, _chan_info) \ +{ \ + .datasheet_name = _name, \ + .type = _type, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(_chan_info), \ + .indexed = 1, \ + .channel = _chan, \ +} + +static const struct iio_chan_spec tsc2007_iio_channel[] = { +TSC2007_CHAN_IIO (0 ,"x" ,IIO_VOLTAGE ,IIO_CHAN_INFO_RAW ), +TSC2007_CHAN_IIO (1 ,"y" ,IIO_VOLTAGE ,IIO_CHAN_INFO_RAW ), +TSC2007_CHAN_IIO (2 ,"z1" ,IIO_VOLTAGE ,IIO_CHAN_INFO_RAW ), +TSC2007_CHAN_IIO (3 ,"z2" ,IIO_VOLTAGE ,IIO_CHAN_INFO_RAW ), +TSC2007_CHAN_IIO (4 ,"adc" ,IIO_VOLTAGE ,IIO_CHAN_INFO_RAW ), +TSC2007_CHAN_IIO (5 ,"rt" ,IIO_VOLTAGE ,IIO_CHAN_INFO_RAW ),/* Ohms? */
drivers/input/touchscreen/tsc2007_iio.c new file +116
-0+TSC2007_CHAN_IIO (6 ,"pen" ,IIO_PRESSURE ,IIO_CHAN_INFO_RAW ), +TSC2007_CHAN_IIO (7 ,"temp0" ,IIO_TEMP ,IIO_CHAN_INFO_RAW ), + TSC2007_CHAN_IIO(8, "temp1", IIO_TEMP, IIO_CHAN_INFO_RAW), +}; + +static int tsc2007_read_raw (struct iio_dev *indio_dev, +struct iio_chan_spec const *chan,int *val,int *val2,long mask) +{ +struct tsc2007_iio *iio =iio_priv (indio_dev); +struct tsc2007 *tsc = iio->ts; +int adc_chan = chan->channel; +int ret =0 ; + +if (adc_chan >=ARRAY_SIZE (tsc2007_iio_channel)) +return -EINVAL ; + +if (mask !=IIO_CHAN_INFO_RAW ) +return -EINVAL ; + +mutex_lock (&tsc->mlock); + +switch (chan->channel) { +case 0 : + *val =tsc2007_xfer (tsc,READ_X ); +break ; +case 1 : + *val =tsc2007_xfer (tsc,READ_Y ); +break ; +case 2 : + *val =tsc2007_xfer (tsc,READ_Z1 ); +break ; +case 3 : + *val =tsc2007_xfer (tsc,READ_Z2 ); +break ; +case 4 : + *val =tsc2007_xfer (tsc, (ADC_ON_12BIT |TSC2007_MEASURE_AUX )); +break ; +case 5 : { +struct ts_event tc; + + tc.x =tsc2007_xfer (tsc,READ_X ); + tc.z1 =tsc2007_xfer (tsc,READ_Z1 ); + tc.z2 =tsc2007_xfer (tsc,READ_Z2 ); + *val =tsc2007_calculate_resistance (tsc, &tc); +break ; + } +case 6 : + *val =tsc2007_is_pen_down (tsc); +break ; +case 7 : + *val =tsc2007_xfer (tsc, + (ADC_ON_12BIT |TSC2007_MEASURE_TEMP0 )); +break ; +case 8 : + *val =tsc2007_xfer (tsc, + (ADC_ON_12BIT |TSC2007_MEASURE_TEMP1 )); +break ; + } + +/* Prepare for next touch reading - power down ADC, enable PENIRQ */ +tsc2007_xfer (tsc,PWRDOWN ); + +mutex_unlock (&tsc->mlock); + + ret =IIO_VAL_INT ; + +return ret; +} + +static const struct iio_info tsc2007_iio_info = { + .read_raw = tsc2007_read_raw, + .driver_module =THIS_MODULE , +}; + +int tsc2007_iio_configure (struct tsc2007 *ts) +{ +int err; +struct iio_dev *indio_dev; +struct tsc2007_iio *iio; + + indio_dev =devm_iio_device_alloc (&ts->client->dev, +sizeof (struct tsc2007_iio )); +if (!indio_dev) { +dev_err (&ts->client->dev,"iio_device_alloc failed\n" ); +return -ENOMEM ; + } + + iio =iio_priv (indio_dev); + iio->ts = ts; + ts->iio_dev = (void *) indio_dev; + + indio_dev->name ="tsc2007" ; + indio_dev->dev.parent = &ts->client->dev; + indio_dev->info = &tsc2007_iio_info; + indio_dev->modes =INDIO_DIRECT_MODE ; + indio_dev->channels = tsc2007_iio_channel; + indio_dev->num_channels =ARRAY_SIZE (tsc2007_iio_channel); + + err =iio_device_register (indio_dev); +if (err <0 ) { +dev_err (&ts->client->dev,"iio_device_register() failed: %d\n" , + err); +return err; + } + +return 0 ; +} +EXPORT_SYMBOL (tsc2007_iio_configure); + +void tsc2007_iio_unconfigure (struct tsc2007 *ts) +{ +struct iio_dev *indio_dev = ts->iio_dev; + +iio_device_unregister (indio_dev); +} +EXPORT_SYMBOL (tsc2007_iio_unconfigure);Signature · 1 line
Sent from my Android device with K-9 Mail. Please excuse my brevity.
Re: [PATCH v8 3/8] drivers:input:tsc2007: add iio interface to read external ADC input and temperature
Hi Jonathan,
Quoted 72 lines
Am 27.11.2016 um 12:02 schrieb Jonathan Cameron <[email protected]>:
Quoted 69 lines · H. Nikolaus Schaller
Quoted 59 lines
Am 24.11.2016 um 18:38 schrieb Jonathan Cameron <[email protected]>:
Quoted 44 lines · H. Nikolaus Schaller
The tsc2007 chip not only has a resistive touch screen controller but also an external AUX adc imput which can be used for an ambient light sensor, battery voltage monitoring or any general purpose.
Additionally it can measure the chip temperature.
This extension provides an iio interface for these adc channels.
Since it is not wasting much resources and is very straightforward, we simply provide all other adc channels as optional iio interfaces as weel. This can be used for debugging or special applications.
This patch also splits the tsc2007 driver in several source files:
tsc2007.h-- constants, structs and stubstsc2007_core.c-- functional parts of the original drivertsc2007_iio.c-- the optional iio stuff
Makefilemagic allows to conditionally link the iio stuff ifCONFIG_IIO=yor =m in a way that it works withCONFIG_TOUCHSCREEN_TSC2007=m.Signed-off-by H. Nikolaus Schaller <[email protected]>Reviewed-by Jonathan Cameron <[email protected]>---
drivers/input/touchscreen/Makefile| 7 +drivers/input/touchscreen/tsc2007.h| 116
++++++++++++++++.../touchscreen/{tsc2007.c=>tsc2007_core.c} | 95 +++----------drivers/input/touchscreen/tsc2007_iio.c| 150
+++++++++++++++++++++4 files changed, 294 insertions(+), 74 deletions(-)create mode 100644
drivers/input/touchscreen/tsc2007.hrenamedrivers/input/touchscreen/{tsc2007.c=>tsc2007_core.c} (86%) create mode 100644drivers/input/touchscreen/tsc2007_iio.cdrivers/input/touchscreen/Makefile +0
-0@@ -80,6 +80,13 @@ obj-$(CONFIG_TOUCHSCREEN_TSC_SERIO) += tsc40.oobj-$(CONFIG_TOUCHSCREEN_TSC200X_CORE) += tsc200x-core.o
obj-$(CONFIG_TOUCHSCREEN_TSC2004) += tsc2004.o
obj-$(CONFIG_TOUCHSCREEN_TSC2005) += tsc2005.odrivers/input/touchscreen/Makefile obj-$(CONFIG_TOUCHSCREEN_TSC_SERIO) += tsc40.o · line 88
Quoted 6 lines
drivers/input/touchscreen/Makefile +6
-0+tsc2007-y := tsc2007_core.o +ifeq ($(CONFIG_IIO),y) +tsc2007-y += tsc2007_iio.o +endif +ifeq ($(CONFIG_IIO),m) +tsc2007-y += tsc2007_iio.oNot tsc2007-m ?
Quoted 1 line
I don't follow how this works!
I guess tsc2007-y is an internal collector variable name for multiple .o components. Sort of a "library" object.
While
obj-y += tsc2007.o adds it to the kernel
obj-m += tsc2007.o adds it to the modules
Quoted 8 lines
Quoted 5 lines
I am not sure if my explanation is correct but it appears to work that way.
Anyways what shall we do? If
CONFIG_TOUCHSCREEN_TSC2007=yand IIO=m we have a problem that we need dynamic binding.Yes, we just need to block that particular combination. Only build in the IIO support if it is also built in. That's way I thought we'd want to add it tsc2007-m which would only be used if tsc2007 as a whole was built as a module.
Yes, that is what one could expect.
Quoted 3 lines
Otherwise it would be ignored (I think!)
I'm not seeing this structure anywhere else in kernel
It is also not described in that way:
http://lxr.free-electrons.com/source/Documentation/kbuild/modules.txt#L146
it only talks about obj-m and <module_name>-y but not <module_name>-m
Quoted 2 lines
- hence cc'd Yann and the
Kbuildlist
to see if they can offer some advices.
Thanks!
BTW, the other tsc2007 and ads7846 patches could already be merged (if there are no more changes needed) since this one only depends on the result of applying all others before.
Quoted 479 lines
As a quick summary, we are looking to add IIO support to this driver in the following circumstances.
IIO and this driver are modules. (ideally handling the dependencies nicely) IIO and this driver are both built in.
Problem case is driver built in and IIO as a module.
Jonathan
Quoted 469 lines
Quoted 468 lines
Quoted 465 lines
+endif
obj-$(CONFIG_TOUCHSCREEN_TSC2007) += tsc2007.o
obj-$(CONFIG_TOUCHSCREEN_UCB1400) += ucb1400_ts.o
obj-$(CONFIG_TOUCHSCREEN_WACOM_W8001) += wacom_w8001.odrivers/input/touchscreen/tsc2007.h new file +16
-0@@ -0,0 +1,116 @@ +/* +* Copyright (c) 2008 MtekVision Co., Ltd. +* Kwangwoo Lee <[email protected]> +* +* Using code from: +* - ads7846.c +* Copyright (c) 2005 David Brownell +* Copyright (c) 2006 Nokia Corporation +* - corgi_ts.c +* Copyright (C) 2004-2005 Richard Purdie +* - omap_ts.[hc], ads7846.h, ts_osk.c +* Copyright (C) 2002 MontaVista Software +* Copyright (C) 2004 Texas Instruments +* Copyright (C) 2005 Dirk Behme +* +* This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */drivers/input/touchscreen/tsc2007.h new file +97
-0+ +#include <linux/input/touchscreen.h> + +#define TSC2007_MEASURE_TEMP0 (0x0 << 4) +#define TSC2007_MEASURE_AUX (0x2 << 4) +#define TSC2007_MEASURE_TEMP1 (0x4 << 4) +#define TSC2007_ACTIVATE_XN (0x8 << 4) +#define TSC2007_ACTIVATE_YN (0x9 << 4) +#define TSC2007_ACTIVATE_YP_XN (0xa << 4) +#define TSC2007_SETUP (0xb << 4) +#define TSC2007_MEASURE_X (0xc << 4) +#define TSC2007_MEASURE_Y (0xd << 4) +#define TSC2007_MEASURE_Z1 (0xe << 4) +#define TSC2007_MEASURE_Z2 (0xf << 4) + +#define TSC2007_POWER_OFF_IRQ_EN (0x0 << 2) +#define TSC2007_ADC_ON_IRQ_DIS0 (0x1 << 2) +#define TSC2007_ADC_OFF_IRQ_EN (0x2 << 2) +#define TSC2007_ADC_ON_IRQ_DIS1 (0x3 << 2) + +#define TSC2007_12BIT (0x0 << 1) +#define TSC2007_8BIT (0x1 << 1) + +#define MAX_12BIT ((1 << 12) - 1) + +#define ADC_ON_12BIT (TSC2007_12BIT | TSC2007_ADC_ON_IRQ_DIS0) + +#define READ_Y (ADC_ON_12BIT | TSC2007_MEASURE_Y) +#define READ_Z1 (ADC_ON_12BIT | TSC2007_MEASURE_Z1) +#define READ_Z2 (ADC_ON_12BIT | TSC2007_MEASURE_Z2) +#define READ_X (ADC_ON_12BIT | TSC2007_MEASURE_X) +#define PWRDOWN (TSC2007_12BIT | TSC2007_POWER_OFF_IRQ_EN) + +struct ts_event { +u16 x; +u16 y; +u16 z1, z2; +}; + +struct tsc2007 { +struct input_dev *input; +char phys[32 ]; + +struct i2c_client *client; + +u16 model; +u16 x_plate_ohms; + +struct touchscreen_properties prop; + +bool report_resistance; +u16 min_x; +u16 min_y; +u16 max_x; +u16 max_y; +u16 max_rt; +unsigned long poll_period;/* in jiffies */ +int fuzzx; +int fuzzy; +int fuzzz; + +unsigned int gpio; +int irq; + +wait_queue_head_t wait; +bool stopped; +bool pendown; + +int (*get_pendown_state)(struct device *); +void (*clear_penirq)(void ); + +struct mutex mlock; +struct iio_dev *iio_dev;/* optional */ +}; + +int tsc2007_xfer (struct tsc2007 *tsc,u8 cmd); +u32 tsc2007_calculate_resistance (struct tsc2007 *tsc, +struct ts_event *tc); +bool tsc2007_is_pen_down (struct tsc2007 *ts); + +#if IS_ENABLED (CONFIG_IIO ) + +/* defined in tsc2007_iio.c */ +int tsc2007_iio_configure (struct tsc2007 *ts); +void tsc2007_iio_unconfigure (struct tsc2007 *ts); + +#else /* CONFIG_IIO */ + +static inline int tsc2007_iio_configure (struct tsc2007 *ts) +{ +return 0 ; +} +static inline void tsc2007_iio_unconfigure (struct tsc2007 *ts) +{ +} + +#endif /* CONFIG_IIO */ drivers/input/touchscreen/tsc2007_core.c renamed from drivers/input/touchscreen/tsc2007.c +3
-71@@ -27,79 +27,11 @@#include <linux/i2c.h> #include <linux/i2c/tsc2007.h> #include <linux/of_device.h> -#include <linux/of.h> #include <linux/of_gpio.h> -#include <linux/input/touchscreen.h> - -#define TSC2007_MEASURE_TEMP0 (0x0 << 4) -#define TSC2007_MEASURE_AUX (0x2 << 4) -#define TSC2007_MEASURE_TEMP1 (0x4 << 4) -#define TSC2007_ACTIVATE_XN (0x8 << 4) -#define TSC2007_ACTIVATE_YN (0x9 << 4) -#define TSC2007_ACTIVATE_YP_XN (0xa << 4) -#define TSC2007_SETUP (0xb << 4) -#define TSC2007_MEASURE_X (0xc << 4) -#define TSC2007_MEASURE_Y (0xd << 4) -#define TSC2007_MEASURE_Z1 (0xe << 4) -#define TSC2007_MEASURE_Z2 (0xf << 4) - -#define TSC2007_POWER_OFF_IRQ_EN (0x0 << 2) -#define TSC2007_ADC_ON_IRQ_DIS0 (0x1 << 2) -#define TSC2007_ADC_OFF_IRQ_EN (0x2 << 2) -#define TSC2007_ADC_ON_IRQ_DIS1 (0x3 << 2) - -#define TSC2007_12BIT (0x0 << 1) -#define TSC2007_8BIT (0x1 << 1) - -#define MAX_12BIT ((1 << 12) - 1) - -#define ADC_ON_12BIT (TSC2007_12BIT | TSC2007_ADC_ON_IRQ_DIS0) - -#define READ_Y (ADC_ON_12BIT | TSC2007_MEASURE_Y) -#define READ_Z1 (ADC_ON_12BIT | TSC2007_MEASURE_Z1) -#define READ_Z2 (ADC_ON_12BIT | TSC2007_MEASURE_Z2) -#define READ_X (ADC_ON_12BIT | TSC2007_MEASURE_X) -#define PWRDOWN (TSC2007_12BIT | TSC2007_POWER_OFF_IRQ_EN) - -struct ts_event { -u16 x; -u16 y; -u16 z1, z2; -}; - -struct tsc2007 { -struct input_dev *input; -char phys[32 ]; - -struct i2c_client *client; - -u16 model; -u16 x_plate_ohms; - -struct touchscreen_properties prop; - -bool report_resistance; -u16 min_x; -u16 min_y; -u16 max_x; -u16 max_y; -u16 max_rt; -unsigned long poll_period;/* in jiffies */ -int fuzzx; -int fuzzy; -int fuzzz; - -unsigned gpio; -int irq; - -wait_queue_head_t wait; -bool stopped; +#include "tsc2007.h" -int (*get_pendown_state)(struct device *); -void (*clear_penirq)(void ); -}; -static inline int tsc2007_xfer (struct tsc2007 *tsc,u8 cmd) +int tsc2007_xfer (struct tsc2007 *tsc,u8 cmd) {s32 data;u16 val;@@ -137,7 +69,7 @@ static void tsc2007_read_values(struct tsc2007 *tsc, struct ts_event *tc)tsc2007_xfer (tsc ,PWRDOWN ); } -static u32 tsc2007_calculate_resistance (struct tsc2007 *tsc, +u32 tsc2007_calculate_resistance (struct tsc2007 *tsc,struct ts_event *tc) {u32 rt = 0;drivers/input/touchscreen/tsc2007_core.c renamed from drivers/input/touchscreen/tsc2007.c +1
-1@@ -158,7 +90,7 @@ static u32 tsc2007_calculate_resistance(structtsc2007 *tsc, return rt; } -static bool tsc2007_is_pen_down (struct tsc2007 *ts) +bool tsc2007_is_pen_down (struct tsc2007 *ts) {/* * NOTE: We can't rely on the pressure to determine the pen down
drivers/input/touchscreen/tsc2007_core.c renamed from drivers/input/touchscreen/tsc2007.c +5
-1@@ -191,7 +123,10 @@ static irqreturn_t tsc2007_soft_irq(int irq, void *handle)while (!ts->stopped &&tsc2007_is_pen_down (ts)) {/* pen is down, continue with the measurement */ + +mutex_lock (&ts->mlock);tsc2007_read_values (ts, &tc); +mutex_unlock (&ts->mlock); rt =tsc2007_calculate_resistance (ts, &tc);@@ -441,7 +376,8 @@ static void tsc2007_call_exit_platform_hw(void *data)static int tsc2007_probe (struct i2c_client *client,const struct i2c_device_id *id) { -const struct tsc2007_platform_data *pdata =dev_get_platdata (&client->dev); +const struct tsc2007_platform_data *pdata = +dev_get_platdata (&client->dev);struct tsc2007 *ts;struct input_dev *input_dev; int err;drivers/input/touchscreen/tsc2007_core.c renamed from drivers/input/touchscreen/tsc2007.c +12
-1@@ -463,7 +399,9 @@ static int tsc2007_probe(struct i2c_client *client, ts->client = client; ts->irq = client->irq; ts->input = input_dev; +init_waitqueue_head (&ts->wait); +mutex_init (&ts->mlock);snprintf (ts->phys,sizeof (ts->phys),"%s/input0" ,dev_name (&client->dev));@@ -534,7 +472,7 @@ static int tsc2007_probe(struct i2c_client *client,if (err <0 ) {dev_err (&client->dev,"Failed to setup chip: %d\n" , err); -return err;/* usually, chip does not respond */ +return err;/* chip does not respond */ } err =input_register_device (input_dev);@@ -544,6 +482,14 @@ static int tsc2007_probe(struct i2c_client *client, return err; } +return tsc2007_iio_configure (ts); +} + +static int tsc2007_remove (struct i2c_client *client) +{ +struct tsc2007 *ts =i2c_get_clientdata (client); + +tsc2007_iio_unconfigure (ts);return 0 ; }@@ -569,6 +515,7 @@ static struct i2c_driver tsc2007_driver = { }, .id_table = tsc2007_idtable, .probe = tsc2007_probe, + .remove = tsc2007_remove, };module_i2c_driver (tsc2007_driver);drivers/input/touchscreen/tsc2007_iio.c new file +5
-0@@ -0,0 +1,150 @@ +/* +* Copyright (c) 2016 Golden Delicious Comp. GmbH&Co. KG +* Nikolaus Schaller <[email protected]> +* +* This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */drivers/input/touchscreen/tsc2007_iio.c new file +26
-0+ +#include <linux/i2c.h> +#include <linux/iio/iio.h> +#include "tsc2007.h" + +struct tsc2007_iio { +struct tsc2007 *ts; +}; + +#define TSC2007_CHAN_IIO (_chan, _name, _type, _chan_info) \ +{ \ + .datasheet_name = _name, \ + .type = _type, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(_chan_info), \ + .indexed = 1, \ + .channel = _chan, \ +} + +static const struct iio_chan_spec tsc2007_iio_channel[] = { +TSC2007_CHAN_IIO (0 ,"x" ,IIO_VOLTAGE ,IIO_CHAN_INFO_RAW ), +TSC2007_CHAN_IIO (1 ,"y" ,IIO_VOLTAGE ,IIO_CHAN_INFO_RAW ), +TSC2007_CHAN_IIO (2 ,"z1" ,IIO_VOLTAGE ,IIO_CHAN_INFO_RAW ), +TSC2007_CHAN_IIO (3 ,"z2" ,IIO_VOLTAGE ,IIO_CHAN_INFO_RAW ), +TSC2007_CHAN_IIO (4 ,"adc" ,IIO_VOLTAGE ,IIO_CHAN_INFO_RAW ), +TSC2007_CHAN_IIO (5 ,"rt" ,IIO_VOLTAGE ,IIO_CHAN_INFO_RAW ),/* Ohms? */
drivers/input/touchscreen/tsc2007_iio.c new file +116
-0+TSC2007_CHAN_IIO (6 ,"pen" ,IIO_PRESSURE ,IIO_CHAN_INFO_RAW ), +TSC2007_CHAN_IIO (7 ,"temp0" ,IIO_TEMP ,IIO_CHAN_INFO_RAW ), + TSC2007_CHAN_IIO(8, "temp1", IIO_TEMP, IIO_CHAN_INFO_RAW), +}; + +static int tsc2007_read_raw (struct iio_dev *indio_dev, +struct iio_chan_spec const *chan,int *val,int *val2,long mask) +{ +struct tsc2007_iio *iio =iio_priv (indio_dev); +struct tsc2007 *tsc = iio->ts; +int adc_chan = chan->channel; +int ret =0 ; + +if (adc_chan >=ARRAY_SIZE (tsc2007_iio_channel)) +return -EINVAL ; + +if (mask !=IIO_CHAN_INFO_RAW ) +return -EINVAL ; + +mutex_lock (&tsc->mlock); + +switch (chan->channel) { +case 0 : + *val =tsc2007_xfer (tsc,READ_X ); +break ; +case 1 : + *val =tsc2007_xfer (tsc,READ_Y ); +break ; +case 2 : + *val =tsc2007_xfer (tsc,READ_Z1 ); +break ; +case 3 : + *val =tsc2007_xfer (tsc,READ_Z2 ); +break ; +case 4 : + *val =tsc2007_xfer (tsc, (ADC_ON_12BIT |TSC2007_MEASURE_AUX )); +break ; +case 5 : { +struct ts_event tc; + + tc.x =tsc2007_xfer (tsc,READ_X ); + tc.z1 =tsc2007_xfer (tsc,READ_Z1 ); + tc.z2 =tsc2007_xfer (tsc,READ_Z2 ); + *val =tsc2007_calculate_resistance (tsc, &tc); +break ; + } +case 6 : + *val =tsc2007_is_pen_down (tsc); +break ; +case 7 : + *val =tsc2007_xfer (tsc, + (ADC_ON_12BIT |TSC2007_MEASURE_TEMP0 )); +break ; +case 8 : + *val =tsc2007_xfer (tsc, + (ADC_ON_12BIT |TSC2007_MEASURE_TEMP1 )); +break ; + } + +/* Prepare for next touch reading - power down ADC, enable PENIRQ */ +tsc2007_xfer (tsc,PWRDOWN ); + +mutex_unlock (&tsc->mlock); + + ret =IIO_VAL_INT ; + +return ret; +} + +static const struct iio_info tsc2007_iio_info = { + .read_raw = tsc2007_read_raw, + .driver_module =THIS_MODULE , +}; + +int tsc2007_iio_configure (struct tsc2007 *ts) +{ +int err; +struct iio_dev *indio_dev; +struct tsc2007_iio *iio; + + indio_dev =devm_iio_device_alloc (&ts->client->dev, +sizeof (struct tsc2007_iio )); +if (!indio_dev) { +dev_err (&ts->client->dev,"iio_device_alloc failed\n" ); +return -ENOMEM ; + } + + iio =iio_priv (indio_dev); + iio->ts = ts; + ts->iio_dev = (void *) indio_dev; + + indio_dev->name ="tsc2007" ; + indio_dev->dev.parent = &ts->client->dev; + indio_dev->info = &tsc2007_iio_info; + indio_dev->modes =INDIO_DIRECT_MODE ; + indio_dev->channels = tsc2007_iio_channel; + indio_dev->num_channels =ARRAY_SIZE (tsc2007_iio_channel); + + err =iio_device_register (indio_dev); +if (err <0 ) { +dev_err (&ts->client->dev,"iio_device_register() failed: %d\n" , + err); +return err; + } + +return 0 ; +} +EXPORT_SYMBOL (tsc2007_iio_configure); + +void tsc2007_iio_unconfigure (struct tsc2007 *ts) +{ +struct iio_dev *indio_dev = ts->iio_dev; + +iio_device_unregister (indio_dev); +} +EXPORT_SYMBOL (tsc2007_iio_unconfigure);Signature · 1 line
Sent from my Android device with K-9 Mail. Please excuse my brevity.
BR,
Nikolaus
Re: [PATCH v8 3/8] drivers:input:tsc2007: add iio interface to read external ADC input and temperature
Hi,
Quoted 17 lines
Am 27.11.2016 um 16:47 schrieb H. Nikolaus Schaller <[email protected]>:
Hi Jonathan,
Quoted 13 lines
Am 27.11.2016 um 12:02 schrieb Jonathan Cameron <[email protected]>:
Quoted 6 lines · H. Nikolaus Schaller
Quoted 6 lines
Am 24.11.2016 um 18:38 schrieb Jonathan Cameron <jic23-tko9wxEg+fIOOJlXag/[email protected]>:
On 22 November 2016 14:02:30 GMT+00:00, "H. Nikolaus Schaller" <[email protected]> wrote:
- hence cc'd Yann and the
Kbuildlist
to see if they can offer some advices.
no response / advice so far.
Quoted 6 lines
Thanks!
BTW, the other tsc2007 and ads7846 patches could already be merged (if there are no more changes needed) since this one only depends on the result of applying all others before.
I wonder if input maintainers can already merge the other patches of this patch series?
BR and thanks,
Nikolaus
Re: [PATCH v8 3/8] drivers:input:tsc2007: add iio interface to read external ADC input and temperature
ping.
Quoted 26 lines
Am 12.12.2016 um 22:21 schrieb H. Nikolaus Schaller <[email protected]>:
Hi,
Quoted 17 lines
Am 27.11.2016 um 16:47 schrieb H. Nikolaus Schaller <[email protected]>:
Hi Jonathan,
Quoted 13 lines
Am 27.11.2016 um 12:02 schrieb Jonathan Cameron <[email protected]>:
Quoted 6 lines · H. Nikolaus Schaller
Quoted 6 lines
Am 24.11.2016 um 18:38 schrieb Jonathan Cameron <jic23-tko9wxEg+fIOOJlXag/[email protected]>:
On 22 November 2016 14:02:30 GMT+00:00, "H. Nikolaus Schaller" <[email protected]> wrote:
- hence cc'd Yann and the
Kbuildlist
to see if they can offer some advices.no response / advice so far.
Quoted 1 line
Quoted 7 lines
Quoted 5 lines
Thanks!
BTW, the other tsc2007 and ads7846 patches could already be merged (if there are no more changes needed) since this one only depends on the result of applying all others before.
I wonder if input maintainers can already merge the other patches of this patch series?
Dmitry Torokhov
maintainerRe: [PATCH v8 3/8] drivers:input:tsc2007: add iio interface to read external ADC input and temperature
In reply to H. Nikolaus SchallerQuoted 15 lines · H. Nikolaus Schaller
Hi,
Quoted 12 lines
Am 27.11.2016 um 16:47 schrieb H. Nikolaus Schaller <[email protected]>:
Hi Jonathan,
Quoted 8 lines
Am 27.11.2016 um 12:02 schrieb Jonathan Cameron <[email protected]>:
Quoted 5 lines · H. Nikolaus Schaller
Quoted 5 lines
Am 24.11.2016 um 18:38 schrieb Jonathan Cameron <jic23-tko9wxEg+fIOOJlXag/[email protected]>:
Quoted 7 lines
Quoted 5 lines
Quoted 5 lines
Quoted 1 line
Quoted 1 line · H. Nikolaus Schaller
- hence cc'd Yann and the
Kbuildlist
to see if they can offer some advices.no response / advice so far.
Since you are saying that IIO stuff is optional, add it to Kconfig explicitly:
config "TOUCHSCREEN_TSC2007_IIO"
bool "IIO interface for external ADC input and temperature" depends on TOUCHSCREEN_TSC2007 depends on IIO=y || IIO=TOUCHSCREEN_TSC2007 help ...
and use this symbols in makefile:
and in Makefile:
obj-$(CONFIG_TOUCHSCREEN_TSC2007) += tsc2007.o tsc2007-y := tsc2007-core.o ... tsc2007-$(CONFIG_TOUCHSCREEN_TSC2007_IIO) += tsc2007_iio.o
Thanks.
Signature · 5 lines
Dmitry -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH v8 3/8] drivers:input:tsc2007: add iio interface to read external ADC input and temperature
Hi Dmitry,
Quoted 36 lines
Am 27.12.2016 um 22:54 schrieb Dmitry Torokhov <[email protected]>:
Quoted 15 lines · H. Nikolaus Schaller
Hi,
Quoted 12 lines
Am 27.11.2016 um 16:47 schrieb H. Nikolaus Schaller <[email protected]>:
Hi Jonathan,
Quoted 8 lines
Am 27.11.2016 um 12:02 schrieb Jonathan Cameron <[email protected]>:
Quoted 5 lines · H. Nikolaus Schaller
Quoted 5 lines
Am 24.11.2016 um 18:38 schrieb Jonathan Cameron <[email protected]>:
Quoted 7 lines
Quoted 5 lines
Quoted 5 lines
Quoted 1 line
Quoted 1 line · H. Nikolaus Schaller
- hence cc'd Yann and the
Kbuildlist
to see if they can offer some advices.no response / advice so far.
Since you are saying that IIO stuff is optional, add it to
Kconfigexplicitly:config "
TOUCHSCREEN_TSC2007_IIO"bool "IIO interface for external ADC input and temperature" depends on TOUCHSCREEN_TSC2007 depends on IIO=y || IIO=TOUCHSCREEN_TSC2007 help ...
Quoted 7 lines
and use this symbols in makefile:
and in
Makefile:obj-$(CONFIG_TOUCHSCREEN_TSC2007) += tsc2007.o tsc2007-y := tsc2007-core.o ... tsc2007-$(CONFIG_TOUCHSCREEN_TSC2007_IIO) += tsc2007_iio.o
Ah, ok. Well, we tried to make it without an explicit config option but it does not hurt to have one.
Your proposal works fine for 3 out of the 4 possible combinations.
I think it is unlikely that the combination TOUCHSCREEN_TSC2007=y IIO=m is needed at all (we configure as much as possible as =m in our kernel).
Patch v9 will come next (where I have also moved this iio driver patch to be 8/8).
BR and thanks,
Nikolaus
Jonathan Cameron
maintainerRe: [PATCH v8 3/8] drivers:input:tsc2007: add iio interface to read external ADC input and temperature
Quoted 46 lines · H. Nikolaus Schaller
Hi Dmitry,
Quoted 36 lines
Am 27.12.2016 um 22:54 schrieb Dmitry Torokhov <[email protected]>:
Quoted 15 lines · H. Nikolaus Schaller
Hi,
Quoted 12 lines
Am 27.11.2016 um 16:47 schrieb H. Nikolaus Schaller <[email protected]>:
Hi Jonathan,
Quoted 8 lines
Am 27.11.2016 um 12:02 schrieb Jonathan Cameron <[email protected]>:
Quoted 5 lines · H. Nikolaus Schaller
Quoted 5 lines
Am 24.11.2016 um 18:38 schrieb Jonathan Cameron <[email protected]>:
Quoted 7 lines
Quoted 5 lines
Quoted 5 lines
Quoted 1 line
Quoted 1 line · H. Nikolaus Schaller
- hence cc'd Yann and the
Kbuildlist
to see if they can offer some advices.no response / advice so far.
Since you are saying that IIO stuff is optional, add it to
Kconfigexplicitly:config "
TOUCHSCREEN_TSC2007_IIO"bool "IIO interface for external ADC input and temperature" depends on TOUCHSCREEN_TSC2007 depends on IIO=y || IIO=TOUCHSCREEN_TSC2007 help ...Quoted 7 lines
and use this symbols in makefile:
and in
Makefile:obj-$(CONFIG_TOUCHSCREEN_TSC2007) += tsc2007.o tsc2007-y := tsc2007-core.o ... tsc2007-$(CONFIG_TOUCHSCREEN_TSC2007_IIO) += tsc2007_iio.o
Quoted 7 lines
Ah, ok. Well, we tried to make it without an explicit config option but it does not hurt to have one.
Your proposal works fine for 3 out of the 4 possible combinations.
I think it is unlikely that the combination TOUCHSCREEN_TSC2007=y IIO=m is needed at all (we configure as much as possible as =m in our kernel).
Indeed - that shouldn't work and is blocked by the above which is good.
Quoted 3 lines
Patch v9 will come next (where I have also moved this iio driver patch to be 8/8).
Wise move ;)
Quoted 4 lines
BR and thanks,
Nikolaus
PATCH v8 4/8 DT:omap3+tsc2007: use new common touchscreen bindings
In reply to H. Nikolaus SchallerWhile we fix the GTA04 we add proper pinmux for the penirq gpio.
Tested on: GTA04A4 and Pyra-Handheld
--- arch/arm/boot/dts/omap3-gta04.dtsi | 25 +++++++++++++++++++++++-- 1 file changed, 23 insertions(+), 2 deletions(-)
arch/arm/boot/dts/omap3-gta04.dtsi +23 -2
@@ -273,6 +273,13 @@ OMAP3_CORE1_IOPAD(0x2134, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio112 */ >; }; + + penirq_pins: pinmux_penirq_pins { + pinctrl-single,pins = < + /* here we could enable to wakeup the cpu from suspend by a pen touch */ + OMAP3_CORE1_IOPAD(0x2194, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio160 */ + >; + }; }; &omap3_pmx_core2 {
@@ -410,10 +417,24 @@ tsc2007@48 { compatible = "ti,tsc2007"; reg = <0x48>; + pinctrl-names = "default"; + pinctrl-0 = <&penirq_pins>; interrupt-parent = <&gpio6>; interrupts = <0 IRQ_TYPE_EDGE_FALLING>; /* GPIO_160 */ - gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; - ti,x-plate-ohms = <600>; + gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* GPIO_160 */ + touchscreen-size-x = <480>; + touchscreen-size-y = <640>; + touchscreen-max-pressure = <1000>; + touchscreen-fuzz-x = <3>; + touchscreen-fuzz-y = <8>; + touchscreen-fuzz-pressure = <10>; + touchscreen-inverted-y; + ti,min-x = <0x100>; + ti,max-x = <0xf00>; + ti,min-y = <0x100>; + ti,max-y = <0xf00>; + ti,max-rt = <4096>; + ti,x-plate-ohms = <550>; }; /* RFID EEPROM */
Signature · 1 line
2.7.3
PATCH v8 5/8 drivers:input:ads7846(+tsc2046): add new common binding names, pre-calibration and flipping
In reply to H. Nikolaus Schallercommit b98abe52fa8e ("Input: add common DT binding for touchscreens") introduced common DT bindings for touchscreens [1] and a helper function to parse the DT.
commit ed7c9870c9bc ("Input: of_touchscreen - add support for inverted / swapped axes") added another helper for parsing axis inversion and swapping
and applying them to x and y coordinates.
Both helpers have been integrated to accommodate any orientation of the touch panel in relation to the LCD.
A new feature is to introduce scaling the min/max ADC values to the screen size.
This makes it possible to pre-calibrate the touch so that is (almost) exactly matches the LCD pixel coordinates it is glued onto. This allows to well enough operate the touch before a user space calibration step can improve the precision.
[1]: Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
--- .../devicetree/bindings/input/ads7846.txt | 9 +++- drivers/input/touchscreen/ads7846.c | 60 ++++++++++++++++++---- 2 files changed, 57 insertions(+), 12 deletions(-)
Documentation/devicetree/bindings/input/ads7846.txt +8 -1
@@ -26,6 +26,12 @@ Additional required properties: Optional properties: +You can optionally specify any of the touchscreen parameters described in + + Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt + +This allows to scale, invert or swap coordinates and define the fuzz factors. + ti,vref-delay-usecs vref supply delay in usecs, 0 for external vref (u16). ti,vref-mv The VREF voltage, in millivolts (u16).
@@ -33,7 +39,7 @@ Optional properties: (ADS7846). ti,keep-vref-on set to keep vref on for differential measurements as well - ti,swap-xy swap x and y axis + ti,swap-xy deprecated name for touchscreen-swapped-x-y ti,settle-delay-usec Settling time of the analog signals; a function of Vcc and the capacitance on the X/Y drivers. If set to non-zero,
@@ -82,6 +88,7 @@ Example for a TSC2046 chip connected to an McSPI controller of an OMAP SoC:: pendown-gpio = <&gpio1 8 0>; vcc-supply = <®_vcc3>; + touchscreen-swapped-x-y; ti,x-min = /bits/ 16 <0>; ti,x-max = /bits/ 16 <8000>; ti,y-min = /bits/ 16 <0>;
drivers/input/touchscreen/ads7846.c +49 -11
116 lines not on this page · raw message
Signature · 1 line
2.7.3
PATCH v8 6/8 dt-bindings: input: move ads7846 bindings to touchscreen subdirectory
In reply to H. Nikolaus Schaller---
Documentation/devicetree/bindings/input/{ => touchscreen}/ads7846.txt | 0
1 file changed, 0 insertions(+), 0 deletions(-)
rename Documentation/devicetree/bindings/input/{ => touchscreen}/ads7846.txt (100%)Documentation/devicetree/bindings/input/touchscreen/ads7846.txt renamed from Documentation/devicetree/bindings/input/ads7846.txt +0 -0
Signature · 6 lines
2.7.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
PATCH v8 7/8 drivers:input:ads7846(+tsc2046): fix spi module table
In reply to H. Nikolaus SchallerFix module table so that the driver is loaded if compiled as module and requested by DT.
--- drivers/input/touchscreen/ads7846.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-)
drivers/input/touchscreen/ads7846.c +10 -1
@@ -1532,6 +1532,16 @@ static int ads7846_remove(struct spi_device *spi)return 0 ; } +static const struct spi_device_id ads7846_idtable[] = { + {"tsc2046" ,0 }, + {"ads7843" ,0 }, + {"ads7845" ,0 }, + {"ads7846" ,0 }, + {"ads7873" ,0 }, + { } +}; +MODULE_DEVICE_TABLE (spi, ads7846_idtable); +static struct spi_driver ads7846_driver = { .driver = { .name ="ads7846" ,
@@ -1546,4 +1556,3 @@ module_spi_driver(ads7846_driver);MODULE_DESCRIPTION ("ADS7846 TouchScreen Driver" );MODULE_LICENSE ("GPL" ); -MODULE_ALIAS ("spi:ads7846" );
Signature · 1 line
2.7.3
PATCH v8 8/8 DT:omap3+ads7846: use new common touchscreen bindings
In reply to H. Nikolaus SchallerThe standard touch screen bindings [1] replace the private ti,swap-xy with touchscreen-swaped-x-y. And for the Openpandora we use touchscreen-size etc. to match the LCD screen size.
[1]: Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
Tested with OpenPandora.
--- arch/arm/boot/dts/omap3-lilly-a83x.dtsi | 2 +- arch/arm/boot/dts/omap3-pandora-common.dtsi | 17 +++++++++++++---- arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi | 3 ++- 3 files changed, 16 insertions(+), 6 deletions(-)
arch/arm/boot/dts/omap3-lilly-a83x.dtsi +1 -1
@@ -325,7 +325,7 @@ ti,y-max = /bits/ 16 <3600>; ti,x-plate-ohms = /bits/ 16 <80>; ti,pressure-max = /bits/ 16 <255>; - ti,swap-xy; + touchscreen-swapped-x-y; wakeup-source; };
arch/arm/boot/dts/omap3-pandora-common.dtsi +13 -4
@@ -700,10 +700,19 @@ pendown-gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; vcc-supply = <&vaux4>; - ti,x-min = /bits/ 16 <0>; - ti,x-max = /bits/ 16 <8000>; - ti,y-min = /bits/ 16 <0>; - ti,y-max = /bits/ 16 <4800>; + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + touchscreen-max-pressure = <1000>; + touchscreen-fuzz-x = <16>; + touchscreen-fuzz-y = <16>; + touchscreen-fuzz-pressure = <10>; + touchscreen-inverted-x; + touchscreen-inverted-y; + + ti,x-min = /bits/ 16 <160>; + ti,x-max = /bits/ 16 <3900>; + ti,y-min = /bits/ 16 <220>; + ti,y-max = /bits/ 16 <3750>; ti,x-plate-ohms = /bits/ 16 <40>; ti,pressure-max = /bits/ 16 <255>;
arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi +2 -1
@@ -66,6 +66,7 @@ ti,x-plate-ohms = /bits/ 16 <40>; ti,pressure-max = /bits/ 16 <255>; ti,swap-xy; - wakeup-source; + touchscreen-swapped-x-y; + linux,wakeup; }; };
Signature · 1 line
2.7.3