x86: Secure Memory Encryption (AMD)
Subsystems (26)
v10 cover x86: Secure Memory Encryption (AMD)
This patch series provides support for AMD's new Secure Memory Encryption (SME) feature.
SME can be used to mark individual pages of memory as encrypted through the page tables. A page of memory that is marked encrypted will be automatically decrypted when read from DRAM and will be automatically encrypted when written to DRAM. Details on SME can found in the links below.
The SME feature is identified through a CPUID function and enabled through the SYSCFG MSR. Once enabled, page table entries will determine how the memory is accessed. If a page table entry has the memory encryption mask set, then that memory will be accessed as encrypted memory. The memory encryption mask (as well as other related information) is determined from settings returned through the same CPUID function that identifies the presence of the feature.
The approach that this patch series takes is to encrypt everything possible starting early in the boot where the kernel is encrypted. Using the page table macros the encryption mask can be incorporated into all page table entries and page allocations. By updating the protection map, userspace allocations are also marked encrypted. Certain data must be accounted for as having been placed in memory before SME was enabled (EFI, initrd, etc.) and accessed accordingly.
This patch series is a pre-cursor to another AMD processor feature called Secure Encrypted Virtualization (SEV). The support for SEV will build upon the SME support and will be submitted later. Details on SEV can be found in the links below.
The following links provide additional detail:
AMD Memory Encryption whitepaper:
http://amd-dev.wpengine.netdna-cdn.com/wordpress/media/2013/12/AMD_Memory_Encryption_Whitepaper_v7-Public.pdf
AMD64 Architecture Programmer's Manual:
http://support.amd.com/TechDocs/24593.pdf
SME is section 7.10
SEV is section 15.34
---
This patch series is based off of the master branch of tip:
https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git master
Commit 5fcfb42b132c ("Merge branch 'linus'")
Source code is also available at https://github.com/codomania/tip/tree/sme-v10
Still to do:
- Kdump support, including using memremap() instead of ioremap_cache()
Changes since v9:
- Cleared SME feature capability for 32-bit builds
- Added a WARNing to the iounmap() path for ISA ranges to catch callers which did not use ioremap()
Changes since v8:
- Changed AMD IOMMU SME-related function name
- Updated the sme_encrypt_kernel() entry/exit code to address new warnings issued by objtool
Changes since v7:
- Fixed kbuild test robot failure related to pgprot_decrypted() macro usage for some non-x86 archs
- Moved calls to encrypt the kernel and retrieve the encryption mask from assembler (head_64.S) into C (head64.c)
- Removed use of phys_to_virt() in __ioremap_caller() when address is in the ISA range. Now regular ioremap() processing occurs.
- Two new, small patches:
- Introduced a native_make_p4d() for use when CONFIG_PGTABLE_LEVELS is not greater than 4
- Introduced __nostackp GCC option to turn off stack protection on a per function basis
- General code cleanup based on feedback
Changes since v6:
- Fixed the asm include file issue that caused build errors on other archs
- Rebased the CR3 register changes on top of Andy Lutomirski's patch
- Added a patch to clear the SME cpu feature if running as a PV guest under Xen
- Added a patch to obtain the AMD microcode level earlier in the boot instead of directly reading the MSR
- Refactor patch #8 ("x86/mm: Add support to enable SME in early boot processing") because the 5-level paging support moved the code into the new C-function __startup_64()
- Removed need to decrypt trampoline area in-place (set memory attributes before copying the trampoline code)
- General code cleanup based on feedback
Changes since v5:
- Added support for 5-level paging
- Added IOMMU support
- Created a generic asm/mem_encrypt.h in order to remove a bunch of #ifndef/#define entries
- Removed changes to the __va() macro and defined a function to return the true physical address in cr3
- Removed sysfs support as it was determined not to be needed
- General code cleanup based on feedback
- General cleanup of patch subjects and descriptions
Changes since v4:
- Re-worked mapping of setup data to not use a fixed list. Rather, check dynamically whether the requested early_memremap()/memremap() call needs to be mapped decrypted.
- Moved SME cpu feature into scattered features
- Moved some declarations into header files
- Cleared the encryption mask from the __PHYSICAL_MASK so that users of macros such as pmd_pfn_mask() don't have to worry/know about the encryption mask
- Updated some return types and values related to EFI and e820 functions so that an error could be returned
- During cpu shutdown, removed cache disabling and added a check for kexec in progress to use wbinvd followed immediately by halt in order to avoid any memory corruption
- Update how persistent memory is identified
- Added a function to find command line arguments and their values
- Added sysfs support
- General code cleanup based on feedback
- General cleanup of patch subjects and descriptions
Changes since v3:
- Broke out some of the patches into smaller individual patches
- Updated Documentation
- Added a message to indicate why the IOMMU was disabled
- Updated CPU feature support for SME by taking into account whether BIOS has enabled SME
- Eliminated redundant functions
- Added some warning messages for DMA usage of bounce buffers when SME is active
- Added support for persistent memory
- Added support to determine when setup data is being mapped and be sure to map it un-encrypted
- Added CONFIG support to set the default action of whether to activate SME if it is supported/enabled
- Added support for (re)booting with kexec
Changes since v2:
- Updated Documentation
- Make the encryption mask available outside of arch/x86 through a standard include file
- Conversion of assembler routines to C where possible (not everything could be converted, e.g. the routine that does the actual encryption needs to be copied into a safe location and it is difficult to determine the actual length of the function in order to copy it)
- Fix SME feature use of scattered CPUID feature
- Creation of SME specific functions for things like encrypting the setup data, ramdisk, etc.
- New take on early_memremap / memremap encryption support
- Additional support for accessing video buffers (fbdev/gpu) as un-encrypted
- Disable IOMMU for now - need to investigate further in relation to how it needs to be programmed relative to accessing physical memory
Changes since v1:
- Added Documentation.
- Removed AMD vendor check for setting the PAT write protect mode
- Updated naming of trampoline flag for SME as well as moving of the SME check to before paging is enabled.
- Change to early_memremap to identify the data being mapped as either boot data or kernel data. The idea being that boot data will have been placed in memory as un-encrypted data and would need to be accessed as such.
- Updated debugfs support for the bootparams to access the data properly.
- Do not set the SYSCFG[MEME] bit, only check it. The setting of the MemEncryptionModeEn bit results in a reduction of physical address size of the processor. It is possible that BIOS could have configured resources resources into a range that will now not be addressable. To prevent this, rely on BIOS to set the SYSCFG[MEME] bit and only then enable memory encryption support in the kernel.
Tom Lendacky (38):
x86: Document AMD Secure Memory Encryption (SME) x86/mm/pat: Set write-protect cache mode for full PAT support x86, mpparse, x86/acpi, x86/PCI, x86/dmi, SFI: Use memremap for RAM
mappings
x86/CPU/AMD: Add the Secure Memory Encryption CPU feature x86/CPU/AMD: Handle SME reduction in physical address size x86/mm: Add Secure Memory Encryption (SME) support x86/mm: Remove phys_to_virt() usage in ioremap()
x86/mm: Add support to enable SME in early boot processing x86/mm: Simplify p[g4um]d_page() macros
x86/mm: Provide general kernel support for memory encryption x86/mm: Add SME support for read_cr3_pa()
x86/mm: Extend early_memremap() support with additional attrs x86/mm: Add support for early encrypt/decrypt of memory x86/mm: Insure that boot memory areas are mapped properly x86/boot/e820: Add support to determine the E820 type of an address
efi: Add an EFI table address match function
efi: Update efi_mem_type() to return an error rather than 0 x86/efi: Update EFI pagetable creation to work with SME x86/mm: Add support to access boot related data in the clear x86, mpparse: Use memremap to map the mpf and mpc data x86/mm: Add support to access persistent memory in the clear x86/mm: Add support for changing the memory encryption attribute x86/realmode: Decrypt trampoline area if memory encryption is active x86, swiotlb: Add memory encryption support
swiotlb: Add warnings for use of bounce buffers with SME x86/CPU/AMD: Make the microcode level available earlier in the boot iommu/amd: Allow the AMD IOMMU to work with memory encryption x86, realmode: Check for memory encryption on the APs x86, drm, fbdev: Do not specify encrypted memory for video mappings
kvm: x86: svm: Support Secure Memory Encryption within KVM x86/mm, kexec: Allow kexec to be used with SME
xen/x86: Remove SME feature in PV guests
x86/mm: Use proper encryption attributes with /dev/mem x86/mm: Create native_make_p4d() for PGTABLE_LEVELS <= 4 x86/mm: Add support to encrypt the kernel in-place x86/boot: Add early cmdline parsing for options with arguments compiler-gcc.h: Introduce __nostackp function attribute x86/mm: Add support to make use of Secure Memory Encryption
Documentation/admin-guide/kernel-parameters.txt | 11 + Documentation/x86/amd-memory-encryption.txt | 68 +++ arch/ia64/kernel/efi.c | 4 +- arch/x86/Kconfig | 29 ++ arch/x86/boot/compressed/pagetable.c | 7 + arch/x86/include/asm/cmdline.h | 2 + arch/x86/include/asm/cpufeatures.h | 1 + arch/x86/include/asm/dma-mapping.h | 5 +- arch/x86/include/asm/dmi.h | 8 +- arch/x86/include/asm/e820/api.h | 2 + arch/x86/include/asm/fixmap.h | 20 + arch/x86/include/asm/init.h | 1 + arch/x86/include/asm/io.h | 8 + arch/x86/include/asm/kexec.h | 8 + arch/x86/include/asm/kvm_host.h | 2 +- arch/x86/include/asm/mem_encrypt.h | 80 ++++ arch/x86/include/asm/msr-index.h | 2 + arch/x86/include/asm/page_types.h | 3 +- arch/x86/include/asm/pgtable.h | 28 +- arch/x86/include/asm/pgtable_types.h | 57 ++- arch/x86/include/asm/processor-flags.h | 5 +- arch/x86/include/asm/processor.h | 8 +- arch/x86/include/asm/realmode.h | 12 + arch/x86/include/asm/set_memory.h | 3 + arch/x86/include/asm/vga.h | 14 +- arch/x86/kernel/acpi/boot.c | 6 +- arch/x86/kernel/cpu/amd.c | 29 +- arch/x86/kernel/cpu/scattered.c | 1 + arch/x86/kernel/e820.c | 26 +- arch/x86/kernel/espfix_64.c | 2 +- arch/x86/kernel/head64.c | 93 +++- arch/x86/kernel/head_64.S | 40 +- arch/x86/kernel/kdebugfs.c | 34 +- arch/x86/kernel/ksysfs.c | 28 +- arch/x86/kernel/machine_kexec_64.c | 22 +- arch/x86/kernel/mpparse.c | 108 +++-- arch/x86/kernel/pci-dma.c | 11 +- arch/x86/kernel/pci-nommu.c | 2 +- arch/x86/kernel/pci-swiotlb.c | 15 +- arch/x86/kernel/process.c | 17 +- arch/x86/kernel/setup.c | 9 + arch/x86/kvm/mmu.c | 11 +- arch/x86/kvm/mmu.h | 2 +- arch/x86/kvm/svm.c | 35 +- arch/x86/kvm/vmx.c | 2 +- arch/x86/kvm/x86.c | 3 +- arch/x86/lib/cmdline.c | 105 +++++ arch/x86/mm/Makefile | 2 + arch/x86/mm/ident_map.c | 12 +- arch/x86/mm/ioremap.c | 287 +++++++++++- arch/x86/mm/kasan_init_64.c | 6 +- arch/x86/mm/mem_encrypt.c | 593 ++++++++++++++++++++++++ arch/x86/mm/mem_encrypt_boot.S | 149 ++++++ arch/x86/mm/pageattr.c | 67 +++ arch/x86/mm/pat.c | 9 +- arch/x86/mm/tlb.c | 4 +- arch/x86/pci/common.c | 4 +- arch/x86/platform/efi/efi.c | 6 +- arch/x86/platform/efi/efi_64.c | 15 +- arch/x86/realmode/init.c | 12 + arch/x86/realmode/rm/trampoline_64.S | 24 + arch/x86/xen/enlighten_pv.c | 1 + drivers/firmware/dmi-sysfs.c | 5 +- drivers/firmware/efi/efi.c | 33 ++ drivers/firmware/pcdp.c | 4 +- drivers/gpu/drm/drm_gem.c | 2 + drivers/gpu/drm/drm_vm.c | 4 + drivers/gpu/drm/ttm/ttm_bo_vm.c | 7 +- drivers/gpu/drm/udl/udl_fb.c | 4 + drivers/iommu/amd_iommu.c | 30 +- drivers/iommu/amd_iommu_init.c | 34 +- drivers/iommu/amd_iommu_proto.h | 10 + drivers/iommu/amd_iommu_types.h | 2 +- drivers/sfi/sfi_core.c | 22 +- drivers/video/fbdev/core/fbmem.c | 12 + include/asm-generic/early_ioremap.h | 2 + include/asm-generic/pgtable.h | 12 + include/linux/compiler-gcc.h | 2 + include/linux/compiler.h | 4 + include/linux/dma-mapping.h | 13 + include/linux/efi.h | 9 +- include/linux/io.h | 2 + include/linux/kexec.h | 8 + include/linux/mem_encrypt.h | 48 ++ include/linux/swiotlb.h | 1 + init/main.c | 10 + kernel/kexec_core.c | 12 +- kernel/memremap.c | 20 +- lib/swiotlb.c | 57 ++- mm/early_ioremap.c | 28 +- 90 files changed, 2304 insertions(+), 273 deletions(-) create mode 100644 Documentation/x86/amd-memory-encryption.txt create mode 100644 arch/x86/include/asm/mem_encrypt.h create mode 100644 arch/x86/mm/mem_encrypt.c create mode 100644 arch/x86/mm/mem_encrypt_boot.S create mode 100644 include/linux/mem_encrypt.h
Signature · 1 line
1.9.1
PATCH v10 1/38 x86: Document AMD Secure Memory Encryption (SME)
Create a Documentation entry to describe the AMD Secure Memory Encryption (SME) feature and add documentation for the mem_encrypt= kernel parameter.
--- Documentation/admin-guide/kernel-parameters.txt | 11 ++++ Documentation/x86/amd-memory-encryption.txt | 68 +++++++++++++++++++++++++ 2 files changed, 79 insertions(+) create mode 100644 Documentation/x86/amd-memory-encryption.txt
Documentation/admin-guide/kernel-parameters.txt +11 -0
@@ -2233,6 +2233,17 @@ memory contents and reserves bad memory regions that are detected. + mem_encrypt= [X86-64] AMD Secure Memory Encryption (SME) control + Valid arguments: on, off + Default (depends on kernel configuration option): + on (CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT=y) + off (CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT=n) + mem_encrypt=on: Activate SME + mem_encrypt=off: Do not activate SME + + Refer to Documentation/x86/amd-memory-encryption.txt + for details on when memory encryption can be activated. + mem_sleep_default= [SUSPEND] Default system suspend mode: s2idle - Suspend-To-Idle shallow - Power-On Suspend or equivalent (if supported)
Documentation/x86/amd-memory-encryption.txt new file +68 -0
68 lines not on this page · raw message
Signature · 7 lines
1.9.1 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
tip-bot for Tom Lendacky
merge bot[tip:x86/mm] x86/cpu/AMD: Document AMD Secure Memory Encryption (SME)
x86/cpu/AMD: Document AMD Secure Memory Encryption (SME)
Commit-ID: c262f3b9a3246da87c66ce398cd7e30d8f1529ea Gitweb: http://git.kernel.org/tip/c262f3b9a3246da87c66ce398cd7e30d8f1529ea Author: Tom Lendacky <[email protected]> AuthorDate: Mon, 17 Jul 2017 16:09:58 -0500 Committer: Ingo Molnar <[email protected]> CommitDate: Tue, 18 Jul 2017 11:37:58 +0200
x86/cpu/AMD: Document AMD Secure Memory Encryption (SME)
Create a Documentation entry to describe the AMD Secure Memory Encryption (SME) feature and add documentation for the mem_encrypt= kernel parameter.
--- Documentation/admin-guide/kernel-parameters.txt | 11 ++++ Documentation/x86/amd-memory-encryption.txt | 68 +++++++++++++++++++++++++ 2 files changed, 79 insertions(+)
Documentation/admin-guide/kernel-parameters.txt +11 -0
@@ -2233,6 +2233,17 @@ memory contents and reserves bad memory regions that are detected. + mem_encrypt= [X86-64] AMD Secure Memory Encryption (SME) control + Valid arguments: on, off + Default (depends on kernel configuration option): + on (CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT=y) + off (CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT=n) + mem_encrypt=on: Activate SME + mem_encrypt=off: Do not activate SME + + Refer to Documentation/x86/amd-memory-encryption.txt + for details on when memory encryption can be activated. + mem_sleep_default= [SUSPEND] Default system suspend mode: s2idle - Suspend-To-Idle shallow - Power-On Suspend or equivalent (if supported)
Documentation/x86/amd-memory-encryption.txt new file +68 -0
68 lines not on this page · raw message
PATCH v10 2/38 x86/mm/pat: Set write-protect cache mode for full PAT support
In reply to Tom LendackyFor processors that support PAT, set the write-protect cache mode (_PAGE_CACHE_MODE_WP) entry to the actual write-protect value (x05).
--- arch/x86/mm/pat.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
arch/x86/mm/pat.c +3 -3
@@ -293,7 +293,7 @@ void init_cache_modes(void)* pat_init - Initialize PAT MSR and PAT table * * This function initializes PAT MSR and PAT table with an OS-defined value -* to enable additional cache attributes, WC and WT. +* to enable additional cache attributes, WC, WT and WP. * * This function must be called on all CPUs using the specific sequence of * operations defined in Intel SDM. mtrr_rendezvous_handler() provides this
@@ -352,7 +352,7 @@ void pat_init(void)* 010 2 UC-: _PAGE_CACHE_MODE_UC_MINUS * 011 3 UC : _PAGE_CACHE_MODE_UC * 100 4 WB : Reserved -* 101 5 WC : Reserved +* 101 5 WP : _PAGE_CACHE_MODE_WP * 110 6 UC-: Reserved * 111 7 WT : _PAGE_CACHE_MODE_WT *
@@ -360,7 +360,7 @@ void pat_init(void)* corresponding types in the presence of PAT errata. */ pat =PAT (0 ,WB ) |PAT (1 ,WC ) |PAT (2 ,UC_MINUS ) |PAT (3 ,UC ) | -PAT (4 ,WB ) |PAT (5 ,WC ) |PAT (6 ,UC_MINUS ) |PAT (7 ,WT ); +PAT (4 ,WB ) |PAT (5 ,WP ) |PAT (6 ,UC_MINUS ) |PAT (7 ,WT ); }if (!boot_cpu_done) {
Signature · 7 lines
1.9.1 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
tip-bot for Tom Lendacky
merge bot[tip:x86/mm] x86/mm/pat: Set write-protect cache mode for full PAT support
x86/mm/pat: Set write-protect cache mode for full PAT support
Commit-ID: aac7b79eea6118dee3da9b99dcd564471672806d Gitweb: http://git.kernel.org/tip/aac7b79eea6118dee3da9b99dcd564471672806d Author: Tom Lendacky <[email protected]> AuthorDate: Mon, 17 Jul 2017 16:09:59 -0500 Committer: Ingo Molnar <[email protected]> CommitDate: Tue, 18 Jul 2017 11:37:58 +0200
x86/mm/pat: Set write-protect cache mode for full PAT support
For processors that support PAT, set the write-protect cache mode (_PAGE_CACHE_MODE_WP) entry to the actual write-protect value (x05).
--- arch/x86/mm/pat.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
arch/x86/mm/pat.c +3 -3
@@ -293,7 +293,7 @@ void init_cache_modes(void)* pat_init - Initialize PAT MSR and PAT table * * This function initializes PAT MSR and PAT table with an OS-defined value -* to enable additional cache attributes, WC and WT. +* to enable additional cache attributes, WC, WT and WP. * * This function must be called on all CPUs using the specific sequence of * operations defined in Intel SDM. mtrr_rendezvous_handler() provides this
@@ -352,7 +352,7 @@ void pat_init(void)* 010 2 UC-: _PAGE_CACHE_MODE_UC_MINUS * 011 3 UC : _PAGE_CACHE_MODE_UC * 100 4 WB : Reserved -* 101 5 WC : Reserved +* 101 5 WP : _PAGE_CACHE_MODE_WP * 110 6 UC-: Reserved * 111 7 WT : _PAGE_CACHE_MODE_WT *
@@ -360,7 +360,7 @@ void pat_init(void)* corresponding types in the presence of PAT errata. */ pat =PAT (0 ,WB ) |PAT (1 ,WC ) |PAT (2 ,UC_MINUS ) |PAT (3 ,UC ) | -PAT (4 ,WB ) |PAT (5 ,WC ) |PAT (6 ,UC_MINUS ) |PAT (7 ,WT ); +PAT (4 ,WB ) |PAT (5 ,WP ) |PAT (6 ,UC_MINUS ) |PAT (7 ,WT ); }if (!boot_cpu_done) {
PATCH v10 3/38 x86, mpparse, x86/acpi, x86/PCI, x86/dmi, SFI: Use memremap for RAM mappings
In reply to Tom LendackyThe ioremap() function is intended for mapping MMIO. For RAM, the memremap() function should be used. Convert calls from ioremap() to memremap() when re-mapping RAM.
This will be used later by SME to control how the encryption mask is applied to memory mappings, with certain memory locations being mapped decrypted vs encrypted.
--- arch/x86/include/asm/dmi.h | 8 ++++---- arch/x86/kernel/acpi/boot.c | 6 +++--- arch/x86/kernel/kdebugfs.c | 34 +++++++++++----------------------- arch/x86/kernel/ksysfs.c | 28 ++++++++++++++-------------- arch/x86/kernel/mpparse.c | 10 +++++----- arch/x86/pci/common.c | 4 ++-- drivers/firmware/dmi-sysfs.c | 5 +++-- drivers/firmware/pcdp.c | 4 ++-- drivers/sfi/sfi_core.c | 22 +++++++++++----------- 9 files changed, 55 insertions(+), 66 deletions(-)
arch/x86/include/asm/dmi.h +4 -4
@@ -13,9 +13,9 @@ static __always_inline __init void *dmi_alloc(unsigned len) }/* Use early IO mappings for DMI because it's initialized early */ -#define dmi_early_remap early_ioremap -#define dmi_early_unmap early_iounmap -#define dmi_remap ioremap_cache -#define dmi_unmap iounmap +#define dmi_early_remap early_memremap +#define dmi_early_unmap early_memunmap +#define dmi_remap (_x, _l) memremap(_x, _l, MEMREMAP_WB) +#define dmi_unmap (_x) memunmap(_x)#endif /* _ASM_X86_DMI_H */
arch/x86/kernel/acpi/boot.c +3 -3
@@ -115,7 +115,7 @@#define ACPI_INVALID_GSI INT_MIN/* -* This is just a simple wrapper around early_ioremap(), +* This is just a simple wrapper around early_memremap(), * with sanity checks for phys == 0 and size == 0. */ char *__init __acpi_map_table (unsigned long phys,unsigned long size)
@@ -124,7 +124,7 @@ char *__init __acpi_map_table(unsigned long phys, unsigned long size)if (!phys || !size)return NULL ; -return early_ioremap (phys, size); +return early_memremap (phys, size); }void __init __acpi_unmap_table (char *map,unsigned long size)
@@ -132,7 +132,7 @@ void __init __acpi_unmap_table(char *map, unsigned long size)if (!map || !size)return ; -early_iounmap (map, size); +early_memunmap (map, size); }#ifdef CONFIG_X86_LOCAL_APIC
arch/x86/kernel/kdebugfs.c +11 -23
@@ -33,7 +33,6 @@ static ssize_t setup_data_read(struct file *file, char __user *user_buf,struct setup_data_node *node = file->private_data;unsigned long remain;loff_t pos = *ppos; -struct page *pg;void *p;u64 pa;
@@ -47,18 +46,13 @@ static ssize_t setup_data_read(struct file *file, char __user *user_buf, count = node->len - pos; pa = node->paddr +sizeof (struct setup_data ) + pos; - pg =pfn_to_page ((pa + count -1 ) >>PAGE_SHIFT ); -if (PageHighMem (pg)) { - p =ioremap_cache (pa, count); -if (!p) -return -ENXIO ; - }else - p =__va (pa); + p =memremap (pa, count,MEMREMAP_WB ); +if (!p) +return -ENOMEM ; remain =copy_to_user (user_buf, p, count); -if (PageHighMem (pg)) -iounmap (p); +memunmap (p);if (remain)return -EFAULT ;
@@ -109,7 +103,6 @@ static int __init create_setup_data_nodes(struct dentry *parent)struct setup_data *data;int error;struct dentry *d; -struct page *pg;u64 pa_data;int no =0 ;
@@ -126,16 +119,12 @@ static int __init create_setup_data_nodes(struct dentry *parent) goto err_dir; } - pg =pfn_to_page ((pa_data+sizeof (*data)-1 ) >>PAGE_SHIFT ); -if (PageHighMem (pg)) { - data =ioremap_cache (pa_data,sizeof (*data)); -if (!data) { -kfree (node); - error = -ENXIO ; - goto err_dir; - } - }else - data =__va (pa_data); + data =memremap (pa_data,sizeof (*data),MEMREMAP_WB ); +if (!data) { +kfree (node); + error = -ENOMEM ; + goto err_dir; + } node->paddr = pa_data; node->type = data->type;
@@ -143,8 +132,7 @@ static int __init create_setup_data_nodes(struct dentry *parent) error =create_setup_data_node (d, no, node); pa_data = data->next; -if (PageHighMem (pg)) -iounmap (data); +memunmap (data);if (error) goto err_dir; no++;
arch/x86/kernel/ksysfs.c +14 -14
@@ -16,8 +16,8 @@#include <linux/stat.h> #include <linux/slab.h> #include <linux/mm.h> +#include <linux/io.h> -#include <asm/io.h> #include <asm/setup.h> static ssize_t version_show(struct kobject *kobj,
@@ -79,12 +79,12 @@ static int get_setup_data_paddr(int nr, u64 *paddr) *paddr = pa_data;return 0 ; } - data =ioremap_cache (pa_data,sizeof (*data)); + data =memremap (pa_data,sizeof (*data),MEMREMAP_WB );if (!data)return -ENOMEM ; pa_data = data->next; -iounmap (data); +memunmap (data); i++; }return -EINVAL ;
@@ -97,17 +97,17 @@ static int __init get_setup_data_size(int nr, size_t *size)u64 pa_data = boot_params.hdr.setup_data;while (pa_data) { - data =ioremap_cache (pa_data,sizeof (*data)); + data =memremap (pa_data,sizeof (*data),MEMREMAP_WB );if (!data)return -ENOMEM ;if (nr == i) { *size = data->len; -iounmap (data); +memunmap (data);return 0 ; } pa_data = data->next; -iounmap (data); +memunmap (data); i++; }return -EINVAL ;
@@ -127,12 +127,12 @@ static ssize_t type_show(struct kobject *kobj, ret =get_setup_data_paddr (nr, &paddr);if (ret)return ret; - data =ioremap_cache (paddr,sizeof (*data)); + data =memremap (paddr,sizeof (*data),MEMREMAP_WB );if (!data)return -ENOMEM ; ret =sprintf (buf,"0x%x\n" , data->type); -iounmap (data); +memunmap (data);return ret; }
@@ -154,7 +154,7 @@ static ssize_t setup_data_data_read(struct file *fp, ret =get_setup_data_paddr (nr, &paddr);if (ret)return ret; - data =ioremap_cache (paddr,sizeof (*data)); + data =memremap (paddr,sizeof (*data),MEMREMAP_WB );if (!data)return -ENOMEM ;
@@ -170,15 +170,15 @@ static ssize_t setup_data_data_read(struct file *fp, goto out; ret = count; - p =ioremap_cache (paddr +sizeof (*data), data->len); + p =memremap (paddr +sizeof (*data), data->len,MEMREMAP_WB );if (!p) { ret = -ENOMEM ; goto out; }memcpy (buf, p + off, count); -iounmap (p); +memunmap (p); out: -iounmap (data); +memunmap (data);return ret; }
@@ -250,13 +250,13 @@ static int __init get_setup_data_total_num(u64 pa_data, int *nr) *nr =0 ;while (pa_data) { *nr +=1 ; - data =ioremap_cache (pa_data,sizeof (*data)); + data =memremap (pa_data,sizeof (*data),MEMREMAP_WB );if (!data) { ret = -ENOMEM ; goto out; } pa_data = data->next; -iounmap (data); +memunmap (data); } out:
arch/x86/kernel/mpparse.c +5 -5
@@ -436,9 +436,9 @@ static unsigned long __init get_mpc_size(unsigned long physptr)struct mpc_table *mpc;unsigned long size; - mpc =early_ioremap (physptr,PAGE_SIZE ); + mpc =early_memremap (physptr,PAGE_SIZE ); size = mpc->length; -early_iounmap (mpc,PAGE_SIZE ); +early_memunmap (mpc,PAGE_SIZE );apic_printk (APIC_VERBOSE ," mpc: %lx-%lx\n" , physptr, physptr + size);return size;
@@ -450,7 +450,7 @@ static int __init check_physptr(struct mpf_intel *mpf, unsigned int early)unsigned long size; size =get_mpc_size (mpf->physptr); - mpc =early_ioremap (mpf->physptr, size); + mpc =early_memremap (mpf->physptr, size);/* * Read the physical hardware table. Anything here will * override the defaults.
@@ -461,10 +461,10 @@ static int __init check_physptr(struct mpf_intel *mpf, unsigned int early)#endif pr_err ("BIOS bug, MP table errors detected!...\n" );pr_cont ("... disabling SMP support. (tell your hw vendor)\n" ); -early_iounmap (mpc, size); +early_memunmap (mpc, size);return -1 ; } -early_iounmap (mpc, size); +early_memunmap (mpc, size);if (early)return -1 ;
arch/x86/pci/common.c +2 -2
@@ -674,7 +674,7 @@ int pcibios_add_device(struct pci_dev *dev) pa_data = boot_params.hdr.setup_data;while (pa_data) { - data =ioremap (pa_data,sizeof (*rom)); + data =memremap (pa_data,sizeof (*rom),MEMREMAP_WB );if (!data)return -ENOMEM ;
@@ -693,7 +693,7 @@ int pcibios_add_device(struct pci_dev *dev) } } pa_data = data->next; -iounmap (data); +memunmap (data); }set_dma_domain_ops (dev);set_dev_domain_options (dev);
drivers/firmware/dmi-sysfs.c +3 -2
@@ -25,6 +25,7 @@#include <linux/slab.h> #include <linux/list.h> #include <linux/io.h> +#include <asm/dmi.h> #define MAX_ENTRY_TYPE 255/* Most of these aren't used, but we consider the top entry type is only 8 bits */
@@ -380,7 +381,7 @@ static ssize_t dmi_sel_raw_read_phys32(struct dmi_sysfs_entry *entry,u8 __iomem *mapped;ssize_t wrote =0 ; - mapped =ioremap (sel->access_method_address, sel->area_length); + mapped =dmi_remap (sel->access_method_address, sel->area_length);if (!mapped)return -EIO ;
@@ -390,7 +391,7 @@ static ssize_t dmi_sel_raw_read_phys32(struct dmi_sysfs_entry *entry, wrote++; } -iounmap (mapped); +dmi_unmap (mapped);return wrote; }
drivers/firmware/pcdp.c +2 -2
@@ -95,7 +95,7 @@if (efi.hcdp ==EFI_INVALID_TABLE_ADDR )return -ENODEV ; - pcdp =early_ioremap (efi.hcdp,4096 ); + pcdp =early_memremap (efi.hcdp,4096 );printk (KERN_INFO "PCDP: v%d at 0x%lx\n" , pcdp->rev, efi.hcdp);if (strstr (cmdline,"console=hcdp" )) {
@@ -131,6 +131,6 @@ } out: -early_iounmap (pcdp,4096 ); +early_memunmap (pcdp,4096 );return rc; }
drivers/sfi/sfi_core.c +11 -11
@@ -86,13 +86,13 @@/* * FW creates and saves the SFI tables in memory. When these tables get * used, they may need to be mapped to virtual address space, and the mapping -* can happen before or after the ioremap() is ready, so a flag is needed +* can happen before or after the memremap() is ready, so a flag is needed * to indicating this */ -static u32 sfi_use_ioremap__read_mostly ; +static u32 sfi_use_memremap__read_mostly ;/* -* sfi_un/map_memory calls early_ioremap/iounmap which is a __init function +* sfi_un/map_memory calls early_memremap/memunmap which is a __init function * and introduces section mismatch. So use __ref to make it calm. */ static void __iomem *__ref sfi_map_memory (u64 phys,u32 size)
@@ -100,10 +100,10 @@ static void __iomem * __ref sfi_map_memory(u64 phys, u32 size)if (!phys || !size)return NULL ; -if (sfi_use_ioremap) -return ioremap_cache (phys, size); +if (sfi_use_memremap) +return memremap (phys, size,MEMREMAP_WB );else -return early_ioremap (phys, size); +return early_memremap (phys, size); }static void __ref sfi_unmap_memory (void __iomem *virt,u32 size)
@@ -111,10 +111,10 @@ static void __ref sfi_unmap_memory(void __iomem *virt, u32 size)if (!virt || !size)return ; -if (sfi_use_ioremap) -iounmap (virt); +if (sfi_use_memremap) +memunmap (virt);else -early_iounmap (virt, size); +early_memunmap (virt, size); } static void sfi_print_table_header(unsigned long long pa,
@@ -507,8 +507,8 @@ void __init sfi_init_late(void) length = syst_va->header.len;sfi_unmap_memory (syst_va,sizeof (struct sfi_table_simple )); -/* Use ioremap now after it is ready */ - sfi_use_ioremap =1 ; +/* Use memremap now after it is ready */ + sfi_use_memremap =1 ; syst_va =sfi_map_memory (syst_pa, length);sfi_acpi_init ();
Signature · 7 lines
1.9.1 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
tip-bot for Tom Lendacky
merge bot[tip:x86/mm] x86, mpparse, x86/acpi, x86/PCI, x86/dmi, SFI: Use memremap() for RAM mappings
x86, mpparse, x86/acpi, x86/PCI, x86/dmi, SFI: Use memremap() for RAM mappings
Commit-ID: f7750a79568788473c5e8092ee58a52248f34329 Gitweb: http://git.kernel.org/tip/f7750a79568788473c5e8092ee58a52248f34329 Author: Tom Lendacky <[email protected]> AuthorDate: Mon, 17 Jul 2017 16:10:00 -0500 Committer: Ingo Molnar <[email protected]> CommitDate: Tue, 18 Jul 2017 11:37:58 +0200
x86, mpparse, x86/acpi, x86/PCI, x86/dmi, SFI: Use memremap() for RAM mappings
The ioremap() function is intended for mapping MMIO. For RAM, the memremap() function should be used. Convert calls from ioremap() to memremap() when re-mapping RAM.
This will be used later by SME to control how the encryption mask is applied to memory mappings, with certain memory locations being mapped decrypted vs encrypted.
--- arch/x86/include/asm/dmi.h | 8 ++++---- arch/x86/kernel/acpi/boot.c | 6 +++--- arch/x86/kernel/kdebugfs.c | 34 +++++++++++----------------------- arch/x86/kernel/ksysfs.c | 28 ++++++++++++++-------------- arch/x86/kernel/mpparse.c | 10 +++++----- arch/x86/pci/common.c | 4 ++-- drivers/firmware/dmi-sysfs.c | 5 +++-- drivers/firmware/pcdp.c | 4 ++-- drivers/sfi/sfi_core.c | 22 +++++++++++----------- 9 files changed, 55 insertions(+), 66 deletions(-)
arch/x86/include/asm/dmi.h +4 -4
@@ -13,9 +13,9 @@ static __always_inline __init void *dmi_alloc(unsigned len) }/* Use early IO mappings for DMI because it's initialized early */ -#define dmi_early_remap early_ioremap -#define dmi_early_unmap early_iounmap -#define dmi_remap ioremap_cache -#define dmi_unmap iounmap +#define dmi_early_remap early_memremap +#define dmi_early_unmap early_memunmap +#define dmi_remap (_x, _l) memremap(_x, _l, MEMREMAP_WB) +#define dmi_unmap (_x) memunmap(_x)#endif /* _ASM_X86_DMI_H */
arch/x86/kernel/acpi/boot.c +3 -3
@@ -115,7 +115,7 @@ static u32 isa_irq_to_gsi[NR_IRQS_LEGACY] __read_mostly = {#define ACPI_INVALID_GSI INT_MIN/* -* This is just a simple wrapper around early_ioremap(), +* This is just a simple wrapper around early_memremap(), * with sanity checks for phys == 0 and size == 0. */ char *__init __acpi_map_table (unsigned long phys,unsigned long size)
@@ -124,7 +124,7 @@ char *__init __acpi_map_table(unsigned long phys, unsigned long size)if (!phys || !size)return NULL ; -return early_ioremap (phys, size); +return early_memremap (phys, size); }void __init __acpi_unmap_table (char *map,unsigned long size)
@@ -132,7 +132,7 @@ void __init __acpi_unmap_table(char *map, unsigned long size)if (!map || !size)return ; -early_iounmap (map, size); +early_memunmap (map, size); }#ifdef CONFIG_X86_LOCAL_APIC
arch/x86/kernel/kdebugfs.c +11 -23
@@ -33,7 +33,6 @@ static ssize_t setup_data_read(struct file *file, char __user *user_buf,struct setup_data_node *node = file->private_data;unsigned long remain;loff_t pos = *ppos; -struct page *pg;void *p;u64 pa;
@@ -47,18 +46,13 @@ static ssize_t setup_data_read(struct file *file, char __user *user_buf, count = node->len - pos; pa = node->paddr +sizeof (struct setup_data ) + pos; - pg =pfn_to_page ((pa + count -1 ) >>PAGE_SHIFT ); -if (PageHighMem (pg)) { - p =ioremap_cache (pa, count); -if (!p) -return -ENXIO ; - }else - p =__va (pa); + p =memremap (pa, count,MEMREMAP_WB ); +if (!p) +return -ENOMEM ; remain =copy_to_user (user_buf, p, count); -if (PageHighMem (pg)) -iounmap (p); +memunmap (p);if (remain)return -EFAULT ;
@@ -109,7 +103,6 @@ static int __init create_setup_data_nodes(struct dentry *parent)struct setup_data *data;int error;struct dentry *d; -struct page *pg;u64 pa_data;int no =0 ;
@@ -126,16 +119,12 @@ static int __init create_setup_data_nodes(struct dentry *parent) goto err_dir; } - pg =pfn_to_page ((pa_data+sizeof (*data)-1 ) >>PAGE_SHIFT ); -if (PageHighMem (pg)) { - data =ioremap_cache (pa_data,sizeof (*data)); -if (!data) { -kfree (node); - error = -ENXIO ; - goto err_dir; - } - }else - data =__va (pa_data); + data =memremap (pa_data,sizeof (*data),MEMREMAP_WB ); +if (!data) { +kfree (node); + error = -ENOMEM ; + goto err_dir; + } node->paddr = pa_data; node->type = data->type;
@@ -143,8 +132,7 @@ static int __init create_setup_data_nodes(struct dentry *parent) error =create_setup_data_node (d, no, node); pa_data = data->next; -if (PageHighMem (pg)) -iounmap (data); +memunmap (data);if (error) goto err_dir; no++;
arch/x86/kernel/ksysfs.c +14 -14
@@ -16,8 +16,8 @@#include <linux/stat.h> #include <linux/slab.h> #include <linux/mm.h> +#include <linux/io.h> -#include <asm/io.h> #include <asm/setup.h> static ssize_t version_show(struct kobject *kobj,
@@ -79,12 +79,12 @@ static int get_setup_data_paddr(int nr, u64 *paddr) *paddr = pa_data;return 0 ; } - data =ioremap_cache (pa_data,sizeof (*data)); + data =memremap (pa_data,sizeof (*data),MEMREMAP_WB );if (!data)return -ENOMEM ; pa_data = data->next; -iounmap (data); +memunmap (data); i++; }return -EINVAL ;
@@ -97,17 +97,17 @@ static int __init get_setup_data_size(int nr, size_t *size)u64 pa_data = boot_params.hdr.setup_data;while (pa_data) { - data =ioremap_cache (pa_data,sizeof (*data)); + data =memremap (pa_data,sizeof (*data),MEMREMAP_WB );if (!data)return -ENOMEM ;if (nr == i) { *size = data->len; -iounmap (data); +memunmap (data);return 0 ; } pa_data = data->next; -iounmap (data); +memunmap (data); i++; }return -EINVAL ;
@@ -127,12 +127,12 @@ static ssize_t type_show(struct kobject *kobj, ret =get_setup_data_paddr (nr, &paddr);if (ret)return ret; - data =ioremap_cache (paddr,sizeof (*data)); + data =memremap (paddr,sizeof (*data),MEMREMAP_WB );if (!data)return -ENOMEM ; ret =sprintf (buf,"0x%x\n" , data->type); -iounmap (data); +memunmap (data);return ret; }
@@ -154,7 +154,7 @@ static ssize_t setup_data_data_read(struct file *fp, ret =get_setup_data_paddr (nr, &paddr);if (ret)return ret; - data =ioremap_cache (paddr,sizeof (*data)); + data =memremap (paddr,sizeof (*data),MEMREMAP_WB );if (!data)return -ENOMEM ;
@@ -170,15 +170,15 @@ static ssize_t setup_data_data_read(struct file *fp, goto out; ret = count; - p =ioremap_cache (paddr +sizeof (*data), data->len); + p =memremap (paddr +sizeof (*data), data->len,MEMREMAP_WB );if (!p) { ret = -ENOMEM ; goto out; }memcpy (buf, p + off, count); -iounmap (p); +memunmap (p); out: -iounmap (data); +memunmap (data);return ret; }
@@ -250,13 +250,13 @@ static int __init get_setup_data_total_num(u64 pa_data, int *nr) *nr =0 ;while (pa_data) { *nr +=1 ; - data =ioremap_cache (pa_data,sizeof (*data)); + data =memremap (pa_data,sizeof (*data),MEMREMAP_WB );if (!data) { ret = -ENOMEM ; goto out; } pa_data = data->next; -iounmap (data); +memunmap (data); } out:
arch/x86/kernel/mpparse.c +5 -5
@@ -436,9 +436,9 @@ static unsigned long __init get_mpc_size(unsigned long physptr)struct mpc_table *mpc;unsigned long size; - mpc =early_ioremap (physptr,PAGE_SIZE ); + mpc =early_memremap (physptr,PAGE_SIZE ); size = mpc->length; -early_iounmap (mpc,PAGE_SIZE ); +early_memunmap (mpc,PAGE_SIZE );apic_printk (APIC_VERBOSE ," mpc: %lx-%lx\n" , physptr, physptr + size);return size;
@@ -450,7 +450,7 @@ static int __init check_physptr(struct mpf_intel *mpf, unsigned int early)unsigned long size; size =get_mpc_size (mpf->physptr); - mpc =early_ioremap (mpf->physptr, size); + mpc =early_memremap (mpf->physptr, size);/* * Read the physical hardware table. Anything here will * override the defaults.
@@ -461,10 +461,10 @@ static int __init check_physptr(struct mpf_intel *mpf, unsigned int early)#endif pr_err ("BIOS bug, MP table errors detected!...\n" );pr_cont ("... disabling SMP support. (tell your hw vendor)\n" ); -early_iounmap (mpc, size); +early_memunmap (mpc, size);return -1 ; } -early_iounmap (mpc, size); +early_memunmap (mpc, size);if (early)return -1 ;
arch/x86/pci/common.c +2 -2
@@ -674,7 +674,7 @@ int pcibios_add_device(struct pci_dev *dev) pa_data = boot_params.hdr.setup_data;while (pa_data) { - data =ioremap (pa_data,sizeof (*rom)); + data =memremap (pa_data,sizeof (*rom),MEMREMAP_WB );if (!data)return -ENOMEM ;
@@ -693,7 +693,7 @@ int pcibios_add_device(struct pci_dev *dev) } } pa_data = data->next; -iounmap (data); +memunmap (data); }set_dma_domain_ops (dev);set_dev_domain_options (dev);
drivers/firmware/dmi-sysfs.c +3 -2
@@ -25,6 +25,7 @@#include <linux/slab.h> #include <linux/list.h> #include <linux/io.h> +#include <asm/dmi.h> #define MAX_ENTRY_TYPE 255/* Most of these aren't used, but we consider the top entry type is only 8 bits */
@@ -380,7 +381,7 @@ static ssize_t dmi_sel_raw_read_phys32(struct dmi_sysfs_entry *entry,u8 __iomem *mapped;ssize_t wrote =0 ; - mapped =ioremap (sel->access_method_address, sel->area_length); + mapped =dmi_remap (sel->access_method_address, sel->area_length);if (!mapped)return -EIO ;
@@ -390,7 +391,7 @@ static ssize_t dmi_sel_raw_read_phys32(struct dmi_sysfs_entry *entry, wrote++; } -iounmap (mapped); +dmi_unmap (mapped);return wrote; }
drivers/firmware/pcdp.c +2 -2
@@ -95,7 +95,7 @@ efi_setup_pcdp_console(char *cmdline)if (efi.hcdp ==EFI_INVALID_TABLE_ADDR )return -ENODEV ; - pcdp =early_ioremap (efi.hcdp,4096 ); + pcdp =early_memremap (efi.hcdp,4096 );printk (KERN_INFO "PCDP: v%d at 0x%lx\n" , pcdp->rev, efi.hcdp);if (strstr (cmdline,"console=hcdp" )) {
@@ -131,6 +131,6 @@ efi_setup_pcdp_console(char *cmdline) } out: -early_iounmap (pcdp,4096 ); +early_memunmap (pcdp,4096 );return rc; }
drivers/sfi/sfi_core.c +11 -11
@@ -86,13 +86,13 @@ static struct sfi_table_simple *syst_va __read_mostly;/* * FW creates and saves the SFI tables in memory. When these tables get * used, they may need to be mapped to virtual address space, and the mapping -* can happen before or after the ioremap() is ready, so a flag is needed +* can happen before or after the memremap() is ready, so a flag is needed * to indicating this */ -static u32 sfi_use_ioremap__read_mostly ; +static u32 sfi_use_memremap__read_mostly ;/* -* sfi_un/map_memory calls early_ioremap/iounmap which is a __init function +* sfi_un/map_memory calls early_memremap/memunmap which is a __init function * and introduces section mismatch. So use __ref to make it calm. */ static void __iomem *__ref sfi_map_memory (u64 phys,u32 size)
@@ -100,10 +100,10 @@ static void __iomem * __ref sfi_map_memory(u64 phys, u32 size)if (!phys || !size)return NULL ; -if (sfi_use_ioremap) -return ioremap_cache (phys, size); +if (sfi_use_memremap) +return memremap (phys, size,MEMREMAP_WB );else -return early_ioremap (phys, size); +return early_memremap (phys, size); }static void __ref sfi_unmap_memory (void __iomem *virt,u32 size)
@@ -111,10 +111,10 @@ static void __ref sfi_unmap_memory(void __iomem *virt, u32 size)if (!virt || !size)return ; -if (sfi_use_ioremap) -iounmap (virt); +if (sfi_use_memremap) +memunmap (virt);else -early_iounmap (virt, size); +early_memunmap (virt, size); } static void sfi_print_table_header(unsigned long long pa,
@@ -507,8 +507,8 @@ void __init sfi_init_late(void) length = syst_va->header.len;sfi_unmap_memory (syst_va,sizeof (struct sfi_table_simple )); -/* Use ioremap now after it is ready */ - sfi_use_ioremap =1 ; +/* Use memremap now after it is ready */ + sfi_use_memremap =1 ; syst_va =sfi_map_memory (syst_pa, length);sfi_acpi_init ();
PATCH v10 4/38 x86/CPU/AMD: Add the Secure Memory Encryption CPU feature
In reply to Tom LendackyUpdate the CPU features to include identifying and reporting on the Secure Memory Encryption (SME) feature. SME is identified by CPUID 0x8000001f, but requires BIOS support to enable it (set bit 23 of MSR_K8_SYSCFG). Only show the SME feature as available if reported by CPUID, enabled by BIOS and not configured as CONFIG_X86_32.
--- arch/x86/include/asm/cpufeatures.h | 1 + arch/x86/include/asm/msr-index.h | 2 ++ arch/x86/kernel/cpu/amd.c | 19 +++++++++++++++++++ arch/x86/kernel/cpu/scattered.c | 1 + 4 files changed, 23 insertions(+)
arch/x86/include/asm/cpufeatures.h +1 -0
@@ -196,6 +196,7 @@#define X86_FEATURE_HW_PSTATE ( 7*32+ 8)/* AMD HW-PState */ #define X86_FEATURE_PROC_FEEDBACK ( 7*32+ 9)/* AMD ProcFeedbackInterface */ +#define X86_FEATURE_SME ( 7*32+10)/* AMD Secure Memory Encryption */ #define X86_FEATURE_INTEL_PPIN ( 7*32+14)/* Intel Processor Inventory Number */ #define X86_FEATURE_INTEL_PT ( 7*32+15)/* Intel Processor Trace */
arch/x86/include/asm/msr-index.h +2 -0
@@ -356,6 +356,8 @@#define MSR_K8_TOP_MEM1 0xc001001a#define MSR_K8_TOP_MEM2 0xc001001d#define MSR_K8_SYSCFG 0xc0010010 +#define MSR_K8_SYSCFG_MEM_ENCRYPT_BIT 23 +#define MSR_K8_SYSCFG_MEM_ENCRYPT BIT_ULL(MSR_K8_SYSCFG_MEM_ENCRYPT_BIT)#define MSR_K8_INT_PENDING_MSG 0xc0010055/* C1E active bits in int pending message */ #define K8_INTP_C1E_ACTIVE_MASK 0x18000000
arch/x86/kernel/cpu/amd.c +19 -0
@@ -612,6 +612,25 @@ static void early_init_amd(struct cpuinfo_x86 *c)*/ if (cpu_has_amd_erratum (c, amd_erratum_400))set_cpu_bug (c,X86_BUG_AMD_E400 ); + +/* +* BIOS support is required for SME. If BIOS has not enabled SME +* then don't advertise the feature (set in scattered.c). Also, +* since the SME support requires long mode, don't advertise the +* feature under CONFIG_X86_32. +*/ +if (cpu_has (c,X86_FEATURE_SME )) { +if (IS_ENABLED (CONFIG_X86_32 )) { +clear_cpu_cap (c,X86_FEATURE_SME ); + }else { +u64 msr; + +/* Check if SME is enabled */ +rdmsrl (MSR_K8_SYSCFG , msr); +if (!(msr &MSR_K8_SYSCFG_MEM_ENCRYPT )) +clear_cpu_cap (c,X86_FEATURE_SME ); + } + } }static void init_amd_k8 (struct cpuinfo_x86 *c)
arch/x86/kernel/cpu/scattered.c +1 -0
@@ -31,6 +31,7 @@ struct cpuid_bit { { X86_FEATURE_HW_PSTATE, CPUID_EDX, 7, 0x80000007, 0 }, { X86_FEATURE_CPB, CPUID_EDX, 9, 0x80000007, 0 }, { X86_FEATURE_PROC_FEEDBACK, CPUID_EDX, 11, 0x80000007, 0 }, + { X86_FEATURE_SME, CPUID_EAX, 0, 0x8000001f, 0 }, { 0, 0, 0, 0, 0 } };
Signature · 7 lines
1.9.1 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
tip-bot for Tom Lendacky
merge bot[tip:x86/mm] x86/cpu/AMD: Add the Secure Memory Encryption CPU feature
x86/cpu/AMD: Add the Secure Memory Encryption CPU feature
Commit-ID: 872cbefd2d9c52bd0b1e2c7942c4369e98a5a5ae Gitweb: http://git.kernel.org/tip/872cbefd2d9c52bd0b1e2c7942c4369e98a5a5ae Author: Tom Lendacky <[email protected]> AuthorDate: Mon, 17 Jul 2017 16:10:01 -0500 Committer: Ingo Molnar <[email protected]> CommitDate: Tue, 18 Jul 2017 11:37:59 +0200
x86/cpu/AMD: Add the Secure Memory Encryption CPU feature
Update the CPU features to include identifying and reporting on the Secure Memory Encryption (SME) feature. SME is identified by CPUID 0x8000001f, but requires BIOS support to enable it (set bit 23 of MSR_K8_SYSCFG). Only show the SME feature as available if reported by CPUID, enabled by BIOS and not configured as CONFIG_X86_32=y.
--- arch/x86/include/asm/cpufeatures.h | 1 + arch/x86/include/asm/msr-index.h | 2 ++ arch/x86/kernel/cpu/amd.c | 19 +++++++++++++++++++ arch/x86/kernel/cpu/scattered.c | 1 + 4 files changed, 23 insertions(+)
arch/x86/include/asm/cpufeatures.h +1 -0
@@ -196,6 +196,7 @@#define X86_FEATURE_HW_PSTATE ( 7*32+ 8)/* AMD HW-PState */ #define X86_FEATURE_PROC_FEEDBACK ( 7*32+ 9)/* AMD ProcFeedbackInterface */ +#define X86_FEATURE_SME ( 7*32+10)/* AMD Secure Memory Encryption */ #define X86_FEATURE_INTEL_PPIN ( 7*32+14)/* Intel Processor Inventory Number */ #define X86_FEATURE_INTEL_PT ( 7*32+15)/* Intel Processor Trace */
arch/x86/include/asm/msr-index.h +2 -0
@@ -356,6 +356,8 @@#define MSR_K8_TOP_MEM1 0xc001001a#define MSR_K8_TOP_MEM2 0xc001001d#define MSR_K8_SYSCFG 0xc0010010 +#define MSR_K8_SYSCFG_MEM_ENCRYPT_BIT 23 +#define MSR_K8_SYSCFG_MEM_ENCRYPT BIT_ULL(MSR_K8_SYSCFG_MEM_ENCRYPT_BIT)#define MSR_K8_INT_PENDING_MSG 0xc0010055/* C1E active bits in int pending message */ #define K8_INTP_C1E_ACTIVE_MASK 0x18000000
arch/x86/kernel/cpu/amd.c +19 -0
@@ -611,6 +611,25 @@ static void early_init_amd(struct cpuinfo_x86 *c)*/ if (cpu_has_amd_erratum (c, amd_erratum_400))set_cpu_bug (c,X86_BUG_AMD_E400 ); + +/* +* BIOS support is required for SME. If BIOS has not enabled SME +* then don't advertise the feature (set in scattered.c). Also, +* since the SME support requires long mode, don't advertise the +* feature under CONFIG_X86_32. +*/ +if (cpu_has (c,X86_FEATURE_SME )) { +if (IS_ENABLED (CONFIG_X86_32 )) { +clear_cpu_cap (c,X86_FEATURE_SME ); + }else { +u64 msr; + +/* Check if SME is enabled */ +rdmsrl (MSR_K8_SYSCFG , msr); +if (!(msr &MSR_K8_SYSCFG_MEM_ENCRYPT )) +clear_cpu_cap (c,X86_FEATURE_SME ); + } + } }static void init_amd_k8 (struct cpuinfo_x86 *c)
arch/x86/kernel/cpu/scattered.c +1 -0
@@ -31,6 +31,7 @@ static const struct cpuid_bit cpuid_bits[] = { { X86_FEATURE_HW_PSTATE, CPUID_EDX, 7, 0x80000007, 0 }, { X86_FEATURE_CPB, CPUID_EDX, 9, 0x80000007, 0 }, { X86_FEATURE_PROC_FEEDBACK, CPUID_EDX, 11, 0x80000007, 0 }, + { X86_FEATURE_SME, CPUID_EAX, 0, 0x8000001f, 0 }, { 0, 0, 0, 0, 0 } };
PATCH v10 5/38 x86/CPU/AMD: Handle SME reduction in physical address size
In reply to Tom LendackyWhen System Memory Encryption (SME) is enabled, the physical address space is reduced. Adjust the x86_phys_bits value to reflect this reduction.
--- arch/x86/kernel/cpu/amd.c | 24 +++++++++++++----------- 1 file changed, 13 insertions(+), 11 deletions(-)
arch/x86/kernel/cpu/amd.c +13 -11
@@ -614,21 +614,23 @@ static void early_init_amd(struct cpuinfo_x86 *c)set_cpu_bug (c,X86_BUG_AMD_E400 );/* -* BIOS support is required for SME. If BIOS has not enabled SME -* then don't advertise the feature (set in scattered.c). Also, -* since the SME support requires long mode, don't advertise the -* feature under CONFIG_X86_32. +* BIOS support is required for SME. If BIOS has enabled SME then +* adjust x86_phys_bits by the SME physical address space reduction +* value. If BIOS has not enabled SME then don't advertise the +* feature (set in scattered.c). Also, since the SME support requires +* long mode, don't advertise the feature under CONFIG_X86_32. */ if (cpu_has (c,X86_FEATURE_SME )) { -if (IS_ENABLED (CONFIG_X86_32 )) { -clear_cpu_cap (c,X86_FEATURE_SME ); - }else { -u64 msr; +u64 msr; -/* Check if SME is enabled */ -rdmsrl (MSR_K8_SYSCFG , msr); -if (!(msr &MSR_K8_SYSCFG_MEM_ENCRYPT )) +/* Check if SME is enabled */ +rdmsrl (MSR_K8_SYSCFG , msr); +if (msr &MSR_K8_SYSCFG_MEM_ENCRYPT ) { + c->x86_phys_bits -= (cpuid_ebx (0x8000001f ) >>6 ) &0x3f ; +if (IS_ENABLED (CONFIG_X86_32 ))clear_cpu_cap (c,X86_FEATURE_SME ); + }else { +clear_cpu_cap (c,X86_FEATURE_SME ); } } }
Signature · 7 lines
1.9.1 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
tip-bot for Tom Lendacky
merge bot[tip:x86/mm] x86/cpu/AMD: Handle SME reduction in physical address size
x86/cpu/AMD: Handle SME reduction in physical address size
Commit-ID: 9af9b94068fb1ea3206a700fc222075966fbef14 Gitweb: http://git.kernel.org/tip/9af9b94068fb1ea3206a700fc222075966fbef14 Author: Tom Lendacky <[email protected]> AuthorDate: Mon, 17 Jul 2017 16:10:02 -0500 Committer: Ingo Molnar <[email protected]> CommitDate: Tue, 18 Jul 2017 11:37:59 +0200
x86/cpu/AMD: Handle SME reduction in physical address size
When System Memory Encryption (SME) is enabled, the physical address space is reduced. Adjust the x86_phys_bits value to reflect this reduction.
--- arch/x86/kernel/cpu/amd.c | 24 +++++++++++++----------- 1 file changed, 13 insertions(+), 11 deletions(-)
arch/x86/kernel/cpu/amd.c +13 -11
@@ -613,21 +613,23 @@ static void early_init_amd(struct cpuinfo_x86 *c)set_cpu_bug (c,X86_BUG_AMD_E400 );/* -* BIOS support is required for SME. If BIOS has not enabled SME -* then don't advertise the feature (set in scattered.c). Also, -* since the SME support requires long mode, don't advertise the -* feature under CONFIG_X86_32. +* BIOS support is required for SME. If BIOS has enabled SME then +* adjust x86_phys_bits by the SME physical address space reduction +* value. If BIOS has not enabled SME then don't advertise the +* feature (set in scattered.c). Also, since the SME support requires +* long mode, don't advertise the feature under CONFIG_X86_32. */ if (cpu_has (c,X86_FEATURE_SME )) { -if (IS_ENABLED (CONFIG_X86_32 )) { -clear_cpu_cap (c,X86_FEATURE_SME ); - }else { -u64 msr; +u64 msr; -/* Check if SME is enabled */ -rdmsrl (MSR_K8_SYSCFG , msr); -if (!(msr &MSR_K8_SYSCFG_MEM_ENCRYPT )) +/* Check if SME is enabled */ +rdmsrl (MSR_K8_SYSCFG , msr); +if (msr &MSR_K8_SYSCFG_MEM_ENCRYPT ) { + c->x86_phys_bits -= (cpuid_ebx (0x8000001f ) >>6 ) &0x3f ; +if (IS_ENABLED (CONFIG_X86_32 ))clear_cpu_cap (c,X86_FEATURE_SME ); + }else { +clear_cpu_cap (c,X86_FEATURE_SME ); } } }
PATCH v10 6/38 x86/mm: Add Secure Memory Encryption (SME) support
In reply to Tom LendackyAdd support for Secure Memory Encryption (SME). This initial support provides a Kconfig entry to build the SME support into the kernel and defines the memory encryption mask that will be used in subsequent patches to mark pages as encrypted.
--- arch/x86/Kconfig | 25 +++++++++++++++++++++++++ arch/x86/include/asm/mem_encrypt.h | 30 ++++++++++++++++++++++++++++++ arch/x86/mm/Makefile | 1 + arch/x86/mm/mem_encrypt.c | 21 +++++++++++++++++++++ include/linux/mem_encrypt.h | 35 +++++++++++++++++++++++++++++++++++ 5 files changed, 112 insertions(+) create mode 100644 arch/x86/include/asm/mem_encrypt.h create mode 100644 arch/x86/mm/mem_encrypt.c create mode 100644 include/linux/mem_encrypt.h
arch/x86/Kconfig +25 -0
@@ -1415,6 +1415,31 @@ config X86_DIRECT_GBPAGES supports them), so don't confuse the user by printing that we have them enabled. +config ARCH_HAS_MEM_ENCRYPT + def_bool y + +config AMD_MEM_ENCRYPT + bool "AMD Secure Memory Encryption (SME) support" + depends on X86_64 && CPU_SUP_AMD + ---help--- + Say yes to enable support for the encryption of system memory. + This requires an AMD processor that supports Secure Memory + Encryption (SME). + +config AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT + bool "Activate AMD Secure Memory Encryption (SME) by default" + default y + depends on AMD_MEM_ENCRYPT + ---help--- + Say yes to have system memory encrypted by default if running on + an AMD processor that supports Secure Memory Encryption (SME). + + If set to Y, then the encryption of system memory can be + deactivated with the mem_encrypt=off command line option. + + If set to N, then the encryption of system memory can be + activated with the mem_encrypt=on command line option. + # Common NUMA Features config NUMA bool "Numa Memory Allocation and Scheduler Support"
arch/x86/include/asm/mem_encrypt.h new file +30 -0
@@ -0,0 +1,30 @@ +/* +* AMD Memory Encryption Support +* +* Copyright (C) 2016 Advanced Micro Devices, Inc. +* +* Author: Tom Lendacky <[email protected]> +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +*/ + +#ifndef __X86_MEM_ENCRYPT_H__ +#define __X86_MEM_ENCRYPT_H__ + +#ifndef __ASSEMBLY__ + +#ifdef CONFIG_AMD_MEM_ENCRYPT + +extern unsigned long sme_me_mask; + +#else /* !CONFIG_AMD_MEM_ENCRYPT */ + +#define sme_me_mask 0UL + +#endif /* CONFIG_AMD_MEM_ENCRYPT */ + +#endif /* __ASSEMBLY__ */ + +#endif /* __X86_MEM_ENCRYPT_H__ */
arch/x86/mm/Makefile +1 -0
@@ -39,3 +39,4 @@ obj-$(CONFIG_X86_INTEL_MPX) += mpx.o obj-$(CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS) += pkeys.o obj-$(CONFIG_RANDOMIZE_MEMORY) += kaslr.o +obj-$(CONFIG_AMD_MEM_ENCRYPT) += mem_encrypt.o
arch/x86/mm/mem_encrypt.c new file +21 -0
@@ -0,0 +1,21 @@ +/* +* AMD Memory Encryption Support +* +* Copyright (C) 2016 Advanced Micro Devices, Inc. +* +* Author: Tom Lendacky <[email protected]> +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +*/ + +#include <linux/linkage.h> + +/* +* Since SME related variables are set early in the boot process they must +* reside in the .data section so as not to be zeroed out when the .bss +* section is later cleared. +*/ +unsigned long sme_me_mask __section(.data) = 0; +EXPORT_SYMBOL_GPL (sme_me_mask);
include/linux/mem_encrypt.h new file +35 -0
@@ -0,0 +1,35 @@ +/* +* AMD Memory Encryption Support +* +* Copyright (C) 2016 Advanced Micro Devices, Inc. +* +* Author: Tom Lendacky <[email protected]> +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +*/ + +#ifndef __MEM_ENCRYPT_H__ +#define __MEM_ENCRYPT_H__ + +#ifndef __ASSEMBLY__ + +#ifdef CONFIG_ARCH_HAS_MEM_ENCRYPT + +#include <asm/mem_encrypt.h> + +#else /* !CONFIG_ARCH_HAS_MEM_ENCRYPT */ + +#define sme_me_mask 0UL + +#endif /* CONFIG_ARCH_HAS_MEM_ENCRYPT */ + +static inline bool sme_active (void ) +{ +return !!sme_me_mask; +} + +#endif /* __ASSEMBLY__ */ + +#endif /* __MEM_ENCRYPT_H__ */
Signature · 7 lines
1.9.1 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
tip-bot for Tom Lendacky
merge bot[tip:x86/mm] x86/mm: Add Secure Memory Encryption (SME) support
x86/mm: Add Secure Memory Encryption (SME) support
Commit-ID: 7744ccdbc16f0ac4adae21b3678af93775b3a386 Gitweb: http://git.kernel.org/tip/7744ccdbc16f0ac4adae21b3678af93775b3a386 Author: Tom Lendacky <[email protected]> AuthorDate: Mon, 17 Jul 2017 16:10:03 -0500 Committer: Ingo Molnar <[email protected]> CommitDate: Tue, 18 Jul 2017 11:37:59 +0200
x86/mm: Add Secure Memory Encryption (SME) support
Add support for Secure Memory Encryption (SME). This initial support provides a Kconfig entry to build the SME support into the kernel and defines the memory encryption mask that will be used in subsequent patches to mark pages as encrypted.
--- arch/x86/Kconfig | 25 +++++++++++++++++++++++++ arch/x86/include/asm/mem_encrypt.h | 30 ++++++++++++++++++++++++++++++ arch/x86/mm/Makefile | 1 + arch/x86/mm/mem_encrypt.c | 21 +++++++++++++++++++++ include/linux/mem_encrypt.h | 35 +++++++++++++++++++++++++++++++++++ 5 files changed, 112 insertions(+)
arch/x86/Kconfig +25 -0
@@ -1415,6 +1415,31 @@ config X86_DIRECT_GBPAGES supports them), so don't confuse the user by printing that we have them enabled. +config ARCH_HAS_MEM_ENCRYPT + def_bool y + +config AMD_MEM_ENCRYPT + bool "AMD Secure Memory Encryption (SME) support" + depends on X86_64 && CPU_SUP_AMD + ---help--- + Say yes to enable support for the encryption of system memory. + This requires an AMD processor that supports Secure Memory + Encryption (SME). + +config AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT + bool "Activate AMD Secure Memory Encryption (SME) by default" + default y + depends on AMD_MEM_ENCRYPT + ---help--- + Say yes to have system memory encrypted by default if running on + an AMD processor that supports Secure Memory Encryption (SME). + + If set to Y, then the encryption of system memory can be + deactivated with the mem_encrypt=off command line option. + + If set to N, then the encryption of system memory can be + activated with the mem_encrypt=on command line option. + # Common NUMA Features config NUMA bool "Numa Memory Allocation and Scheduler Support"
arch/x86/include/asm/mem_encrypt.h new file +30 -0
@@ -0,0 +1,30 @@ +/* +* AMD Memory Encryption Support +* +* Copyright (C) 2016 Advanced Micro Devices, Inc. +* +* Author: Tom Lendacky <[email protected]> +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +*/ + +#ifndef __X86_MEM_ENCRYPT_H__ +#define __X86_MEM_ENCRYPT_H__ + +#ifndef __ASSEMBLY__ + +#ifdef CONFIG_AMD_MEM_ENCRYPT + +extern unsigned long sme_me_mask; + +#else /* !CONFIG_AMD_MEM_ENCRYPT */ + +#define sme_me_mask 0UL + +#endif /* CONFIG_AMD_MEM_ENCRYPT */ + +#endif /* __ASSEMBLY__ */ + +#endif /* __X86_MEM_ENCRYPT_H__ */
arch/x86/mm/Makefile +1 -0
@@ -39,3 +39,4 @@ obj-$(CONFIG_X86_INTEL_MPX) += mpx.o obj-$(CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS) += pkeys.o obj-$(CONFIG_RANDOMIZE_MEMORY) += kaslr.o +obj-$(CONFIG_AMD_MEM_ENCRYPT) += mem_encrypt.o
arch/x86/mm/mem_encrypt.c new file +21 -0
@@ -0,0 +1,21 @@ +/* +* AMD Memory Encryption Support +* +* Copyright (C) 2016 Advanced Micro Devices, Inc. +* +* Author: Tom Lendacky <[email protected]> +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +*/ + +#include <linux/linkage.h> + +/* +* Since SME related variables are set early in the boot process they must +* reside in the .data section so as not to be zeroed out when the .bss +* section is later cleared. +*/ +unsigned long sme_me_mask __section(.data) = 0; +EXPORT_SYMBOL_GPL (sme_me_mask);
include/linux/mem_encrypt.h new file +35 -0
@@ -0,0 +1,35 @@ +/* +* AMD Memory Encryption Support +* +* Copyright (C) 2016 Advanced Micro Devices, Inc. +* +* Author: Tom Lendacky <[email protected]> +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +*/ + +#ifndef __MEM_ENCRYPT_H__ +#define __MEM_ENCRYPT_H__ + +#ifndef __ASSEMBLY__ + +#ifdef CONFIG_ARCH_HAS_MEM_ENCRYPT + +#include <asm/mem_encrypt.h> + +#else /* !CONFIG_ARCH_HAS_MEM_ENCRYPT */ + +#define sme_me_mask 0UL + +#endif /* CONFIG_ARCH_HAS_MEM_ENCRYPT */ + +static inline bool sme_active (void ) +{ +return !!sme_me_mask; +} + +#endif /* __ASSEMBLY__ */ + +#endif /* __MEM_ENCRYPT_H__ */
PATCH v10 7/38 x86/mm: Remove phys_to_virt() usage in ioremap()
In reply to Tom LendackyCurrently there is a check if the address being mapped is in the ISA range (is_ISA_range()), and if it is, then phys_to_virt() is used to perform the mapping. When SME is active, the default is to add pagetable mappings with the encryption bit set unless specifically overridden. The resulting pagetable mapping from phys_to_virt() will result in a mapping that has the encryption bit set. With SME, the use of ioremap() is intended to generate pagetable mappings that do not have the encryption bit set through the use of the PAGE_KERNEL_IO protection value.
Rather than special case the SME scenario, remove the ISA range check and usage of phys_to_virt() and have ISA range mappings continue through the remaining ioremap() path.
--- arch/x86/mm/ioremap.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-)
arch/x86/mm/ioremap.c +8 -10
@@ -106,12 +106,6 @@ static void __iomem *__ioremap_caller(resource_size_t phys_addr, }/* -* Don't remap the low PCI/ISA area, it's always mapped.. -*/ -if (is_ISA_range (phys_addr, last_addr)) -return (__force void __iomem *)phys_to_virt (phys_addr); - -/* * Don't allow anybody to remap normal RAM that we're using.. */ pfn = phys_addr >>PAGE_SHIFT ;
@@ -340,13 +334,17 @@ void iounmap(volatile void __iomem *addr)return ;/* -* __ioremap special-cases the PCI/ISA range by not instantiating a -* vm_area and by simply returning an address into the kernel mapping -* of ISA space. So handle that here. +* The PCI/ISA range special-casing was removed from __ioremap() +* so this check, in theory, can be removed. However, there are +* cases where iounmap() is called for addresses not obtained via +* ioremap() (vga16fb for example). Add a warning so that these +* cases can be caught and fixed. */ if ((void __force *)addr >=phys_to_virt (ISA_START_ADDRESS ) && - (void __force *)addr <phys_to_virt (ISA_END_ADDRESS )) + (void __force *)addr <phys_to_virt (ISA_END_ADDRESS )) { +WARN (1 ,"iounmap() called for ISA range not obtained using ioremap()\n" );return ; + } addr = (volatile void __iomem *) (PAGE_MASK & (unsigned long __force )addr);
Signature · 7 lines
1.9.1 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
tip-bot for Tom Lendacky
merge bot[tip:x86/mm] x86/mm: Remove phys_to_virt() usage in ioremap()
x86/mm: Remove phys_to_virt() usage in ioremap()
Commit-ID: 33c2b803edd13487518a2c7d5002d84d7e9c878f Gitweb: http://git.kernel.org/tip/33c2b803edd13487518a2c7d5002d84d7e9c878f Author: Tom Lendacky <[email protected]> AuthorDate: Mon, 17 Jul 2017 16:10:04 -0500 Committer: Ingo Molnar <[email protected]> CommitDate: Tue, 18 Jul 2017 11:37:59 +0200
x86/mm: Remove phys_to_virt() usage in ioremap()
Currently there is a check if the address being mapped is in the ISA range (is_ISA_range()), and if it is, then phys_to_virt() is used to perform the mapping. When SME is active, the default is to add pagetable mappings with the encryption bit set unless specifically overridden. The resulting pagetable mapping from phys_to_virt() will result in a mapping that has the encryption bit set. With SME, the use of ioremap() is intended to generate pagetable mappings that do not have the encryption bit set through the use of the PAGE_KERNEL_IO protection value.
Rather than special case the SME scenario, remove the ISA range check and usage of phys_to_virt() and have ISA range mappings continue through the remaining ioremap() path.
--- arch/x86/mm/ioremap.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-)
arch/x86/mm/ioremap.c +8 -10
@@ -106,12 +106,6 @@ static void __iomem *__ioremap_caller(resource_size_t phys_addr, }/* -* Don't remap the low PCI/ISA area, it's always mapped.. -*/ -if (is_ISA_range (phys_addr, last_addr)) -return (__force void __iomem *)phys_to_virt (phys_addr); - -/* * Don't allow anybody to remap normal RAM that we're using.. */ pfn = phys_addr >>PAGE_SHIFT ;
@@ -340,13 +334,17 @@ void iounmap(volatile void __iomem *addr)return ;/* -* __ioremap special-cases the PCI/ISA range by not instantiating a -* vm_area and by simply returning an address into the kernel mapping -* of ISA space. So handle that here. +* The PCI/ISA range special-casing was removed from __ioremap() +* so this check, in theory, can be removed. However, there are +* cases where iounmap() is called for addresses not obtained via +* ioremap() (vga16fb for example). Add a warning so that these +* cases can be caught and fixed. */ if ((void __force *)addr >=phys_to_virt (ISA_START_ADDRESS ) && - (void __force *)addr <phys_to_virt (ISA_END_ADDRESS )) + (void __force *)addr <phys_to_virt (ISA_END_ADDRESS )) { +WARN (1 ,"iounmap() called for ISA range not obtained using ioremap()\n" );return ; + } addr = (volatile void __iomem *) (PAGE_MASK & (unsigned long __force )addr);
PATCH v10 8/38 x86/mm: Add support to enable SME in early boot processing
In reply to Tom LendackyAdd support to the early boot code to use Secure Memory Encryption (SME). Since the kernel has been loaded into memory in a decrypted state, encrypt the kernel in place and update the early pagetables with the memory encryption mask so that new pagetable entries will use memory encryption.
The routines to set the encryption mask and perform the encryption are stub routines for now with functionality to be added in a later patch.
--- arch/x86/include/asm/mem_encrypt.h | 8 ++++++ arch/x86/kernel/head64.c | 53 ++++++++++++++++++++++++++++++-------- arch/x86/kernel/head_64.S | 20 ++++++++++++-- arch/x86/mm/mem_encrypt.c | 9 +++++++ include/linux/mem_encrypt.h | 5 ++++ 5 files changed, 82 insertions(+), 13 deletions(-)
arch/x86/include/asm/mem_encrypt.h +8 -0
@@ -15,14 +15,22 @@#ifndef __ASSEMBLY__ +#include <linux/init.h> +#ifdef CONFIG_AMD_MEM_ENCRYPT extern unsigned long sme_me_mask; +void __init sme_encrypt_kernel (void ); +void __init sme_enable (void ); +#else /* !CONFIG_AMD_MEM_ENCRYPT */ #define sme_me_mask 0UL +static inline void __init sme_encrypt_kernel (void ) { } +static inline void __init sme_enable (void ) { } +#endif /* CONFIG_AMD_MEM_ENCRYPT */ #endif /* __ASSEMBLY__ */
arch/x86/kernel/head64.c +42 -11
100 lines not on this page · raw message
arch/x86/kernel/head_64.S +18 -2
@@ -73,12 +73,19 @@ startup_64: /* Sanitize CPU configuration */ call verify_cpu + /* + * Perform pagetable fixups. Additionally, if SME is active, encrypt + * the kernel and retrieve the modifier (SME encryption mask if SME + * is active) to be added to the initial pgdir entry that will be + * programmed into CR3. + */ leaq _text(%rip), %rdi pushq %rsi call __startup_64 popq %rsi - movq $(early_top_pgt - __START_KERNEL_map), %rax + /* Form the CR3 value being sure to include the CR3 modifier */ + addq $(early_top_pgt - __START_KERNEL_map), %rax jmp 1f ENTRY(secondary_startup_64) /*
@@ -98,7 +105,16 @@ ENTRY(secondary_startup_64) /* Sanitize CPU configuration */ call verify_cpu - movq $(init_top_pgt - __START_KERNEL_map), %rax + /* + * Retrieve the modifier (SME encryption mask if SME is active) to be + * added to the initial pgdir entry that will be programmed into CR3. + */ + pushq %rsi + call __startup_secondary_64 + popq %rsi + + /* Form the CR3 value being sure to include the CR3 modifier */ + addq $(init_top_pgt - __START_KERNEL_map), %rax 1: /* Enable PAE mode, PGE and LA57 */
arch/x86/mm/mem_encrypt.c +9 -0
@@ -11,6 +11,7 @@*/ #include <linux/linkage.h> +#include <linux/init.h> /* * Since SME related variables are set early in the boot process they must
@@ -19,3 +20,11 @@*/ unsigned long sme_me_mask __section(.data) = 0;EXPORT_SYMBOL_GPL (sme_me_mask); + +void __init sme_encrypt_kernel (void ) +{ +} + +void __init sme_enable (void ) +{ +}
include/linux/mem_encrypt.h +5 -0
@@ -30,6 +30,11 @@ static inline bool sme_active(void)return !!sme_me_mask; } +static inline unsigned long sme_get_me_mask (void ) +{ +return sme_me_mask; +} +#endif /* __ASSEMBLY__ */ #endif /* __MEM_ENCRYPT_H__ */
Signature · 7 lines
1.9.1 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
tip-bot for Tom Lendacky
merge bot[tip:x86/mm] x86/mm: Add support to enable SME in early boot processing
x86/mm: Add support to enable SME in early boot processing
Commit-ID: 5868f3651fa0dff96a57f94d49247d3ef320ebe2 Gitweb: http://git.kernel.org/tip/5868f3651fa0dff96a57f94d49247d3ef320ebe2 Author: Tom Lendacky <[email protected]> AuthorDate: Mon, 17 Jul 2017 16:10:05 -0500 Committer: Ingo Molnar <[email protected]> CommitDate: Tue, 18 Jul 2017 11:37:59 +0200
x86/mm: Add support to enable SME in early boot processing
Add support to the early boot code to use Secure Memory Encryption (SME). Since the kernel has been loaded into memory in a decrypted state, encrypt the kernel in place and update the early pagetables with the memory encryption mask so that new pagetable entries will use memory encryption.
The routines to set the encryption mask and perform the encryption are stub routines for now with functionality to be added in a later patch.
--- arch/x86/include/asm/mem_encrypt.h | 8 ++++++ arch/x86/kernel/head64.c | 53 ++++++++++++++++++++++++++++++-------- arch/x86/kernel/head_64.S | 20 ++++++++++++-- arch/x86/mm/mem_encrypt.c | 9 +++++++ include/linux/mem_encrypt.h | 5 ++++ 5 files changed, 82 insertions(+), 13 deletions(-)
arch/x86/include/asm/mem_encrypt.h +8 -0
@@ -15,14 +15,22 @@#ifndef __ASSEMBLY__ +#include <linux/init.h> +#ifdef CONFIG_AMD_MEM_ENCRYPT extern unsigned long sme_me_mask; +void __init sme_encrypt_kernel (void ); +void __init sme_enable (void ); +#else /* !CONFIG_AMD_MEM_ENCRYPT */ #define sme_me_mask 0UL +static inline void __init sme_encrypt_kernel (void ) { } +static inline void __init sme_enable (void ) { } +#endif /* CONFIG_AMD_MEM_ENCRYPT */ #endif /* __ASSEMBLY__ */
arch/x86/kernel/head64.c +42 -11
100 lines not on this page · raw message
arch/x86/kernel/head_64.S +18 -2
@@ -73,12 +73,19 @@ startup_64: /* Sanitize CPU configuration */ call verify_cpu + /* + * Perform pagetable fixups. Additionally, if SME is active, encrypt + * the kernel and retrieve the modifier (SME encryption mask if SME + * is active) to be added to the initial pgdir entry that will be + * programmed into CR3. + */ leaq _text(%rip), %rdi pushq %rsi call __startup_64 popq %rsi - movq $(early_top_pgt - __START_KERNEL_map), %rax + /* Form the CR3 value being sure to include the CR3 modifier */ + addq $(early_top_pgt - __START_KERNEL_map), %rax jmp 1f ENTRY(secondary_startup_64) /*
@@ -98,7 +105,16 @@ ENTRY(secondary_startup_64) /* Sanitize CPU configuration */ call verify_cpu - movq $(init_top_pgt - __START_KERNEL_map), %rax + /* + * Retrieve the modifier (SME encryption mask if SME is active) to be + * added to the initial pgdir entry that will be programmed into CR3. + */ + pushq %rsi + call __startup_secondary_64 + popq %rsi + + /* Form the CR3 value being sure to include the CR3 modifier */ + addq $(init_top_pgt - __START_KERNEL_map), %rax 1: /* Enable PAE mode, PGE and LA57 */
arch/x86/mm/mem_encrypt.c +9 -0
@@ -11,6 +11,7 @@*/ #include <linux/linkage.h> +#include <linux/init.h> /* * Since SME related variables are set early in the boot process they must
@@ -19,3 +20,11 @@*/ unsigned long sme_me_mask __section(.data) = 0;EXPORT_SYMBOL_GPL (sme_me_mask); + +void __init sme_encrypt_kernel (void ) +{ +} + +void __init sme_enable (void ) +{ +}
include/linux/mem_encrypt.h +5 -0
@@ -30,6 +30,11 @@ static inline bool sme_active(void)return !!sme_me_mask; } +static inline unsigned long sme_get_me_mask (void ) +{ +return sme_me_mask; +} +#endif /* __ASSEMBLY__ */ #endif /* __MEM_ENCRYPT_H__ */
PATCH v10 9/38 x86/mm: Simplify p[g4um]d_page() macros
In reply to Tom LendackyCreate a pgd_pfn() macro similar to the p[4um]d_pfn() macros and then use the p[g4um]d_pfn() macros in the p[g4um]d_page() macros instead of duplicating the code.
--- arch/x86/include/asm/pgtable.h | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-)
arch/x86/include/asm/pgtable.h +9 -7
@@ -195,6 +195,11 @@ static inline unsigned long p4d_pfn(p4d_t p4d)return (p4d_val (p4d) &p4d_pfn_mask (p4d)) >>PAGE_SHIFT ; } +static inline unsigned long pgd_pfn (pgd_t pgd) +{ +return (pgd_val (pgd) &PTE_PFN_MASK ) >>PAGE_SHIFT ; +} +static inline int p4d_large (p4d_t p4d) {/* No 512 GiB pages yet */
@@ -704,8 +709,7 @@ static inline unsigned long pmd_page_vaddr(pmd_t pmd)* Currently stuck as a macro due to indirect forward reference to * linux/mmzone.h's __section_mem_map_addr() definition: */ -#define pmd_page (pmd) \ - pfn_to_page((pmd_val(pmd) & pmd_pfn_mask(pmd)) >> PAGE_SHIFT) +#define pmd_page (pmd) pfn_to_page(pmd_pfn(pmd))/* * the pmd page can be thought of an array like this: pmd_t[PTRS_PER_PMD]
@@ -773,8 +777,7 @@ static inline unsigned long pud_page_vaddr(pud_t pud)* Currently stuck as a macro due to indirect forward reference to * linux/mmzone.h's __section_mem_map_addr() definition: */ -#define pud_page (pud) \ - pfn_to_page((pud_val(pud) & pud_pfn_mask(pud)) >> PAGE_SHIFT) +#define pud_page (pud) pfn_to_page(pud_pfn(pud))/* Find an entry in the second-level page table.. */ static inline pmd_t *pmd_offset (pud_t *pud,unsigned long address)
@@ -824,8 +827,7 @@ static inline unsigned long p4d_page_vaddr(p4d_t p4d)* Currently stuck as a macro due to indirect forward reference to * linux/mmzone.h's __section_mem_map_addr() definition: */ -#define p4d_page (p4d) \ - pfn_to_page((p4d_val(p4d) & p4d_pfn_mask(p4d)) >> PAGE_SHIFT) +#define p4d_page (p4d) pfn_to_page(p4d_pfn(p4d))/* Find an entry in the third-level page table.. */ static inline pud_t *pud_offset (p4d_t *p4d,unsigned long address)
@@ -859,7 +861,7 @@ static inline unsigned long pgd_page_vaddr(pgd_t pgd)* Currently stuck as a macro due to indirect forward reference to * linux/mmzone.h's __section_mem_map_addr() definition: */ -#define pgd_page (pgd) pfn_to_page(pgd_val(pgd) >> PAGE_SHIFT) +#define pgd_page (pgd) pfn_to_page(pgd_pfn(pgd))/* to find an entry in a page-table-directory. */ static inline p4d_t *p4d_offset (pgd_t *pgd,unsigned long address)
Signature · 7 lines
1.9.1 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
tip-bot for Tom Lendacky
merge bot[tip:x86/mm] x86/mm: Simplify p[g4um]d_page() macros
x86/mm: Simplify p[g4um]d_page() macros
Commit-ID: fd7e315988b784509ba3f1b42f539bd0b1fca9bb Gitweb: http://git.kernel.org/tip/fd7e315988b784509ba3f1b42f539bd0b1fca9bb Author: Tom Lendacky <[email protected]> AuthorDate: Mon, 17 Jul 2017 16:10:06 -0500 Committer: Ingo Molnar <[email protected]> CommitDate: Tue, 18 Jul 2017 11:38:00 +0200
x86/mm: Simplify p[g4um]d_page() macros
Create a pgd_pfn() macro similar to the p[4um]d_pfn() macros and then use the p[g4um]d_pfn() macros in the p[g4um]d_page() macros instead of duplicating the code.
--- arch/x86/include/asm/pgtable.h | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-)
arch/x86/include/asm/pgtable.h +9 -7
@@ -195,6 +195,11 @@ static inline unsigned long p4d_pfn(p4d_t p4d)return (p4d_val (p4d) &p4d_pfn_mask (p4d)) >>PAGE_SHIFT ; } +static inline unsigned long pgd_pfn (pgd_t pgd) +{ +return (pgd_val (pgd) &PTE_PFN_MASK ) >>PAGE_SHIFT ; +} +static inline int p4d_large (p4d_t p4d) {/* No 512 GiB pages yet */
@@ -704,8 +709,7 @@ static inline unsigned long pmd_page_vaddr(pmd_t pmd)* Currently stuck as a macro due to indirect forward reference to * linux/mmzone.h's __section_mem_map_addr() definition: */ -#define pmd_page (pmd) \ - pfn_to_page((pmd_val(pmd) & pmd_pfn_mask(pmd)) >> PAGE_SHIFT) +#define pmd_page (pmd) pfn_to_page(pmd_pfn(pmd))/* * the pmd page can be thought of an array like this: pmd_t[PTRS_PER_PMD]
@@ -773,8 +777,7 @@ static inline unsigned long pud_page_vaddr(pud_t pud)* Currently stuck as a macro due to indirect forward reference to * linux/mmzone.h's __section_mem_map_addr() definition: */ -#define pud_page (pud) \ - pfn_to_page((pud_val(pud) & pud_pfn_mask(pud)) >> PAGE_SHIFT) +#define pud_page (pud) pfn_to_page(pud_pfn(pud))/* Find an entry in the second-level page table.. */ static inline pmd_t *pmd_offset (pud_t *pud,unsigned long address)
@@ -824,8 +827,7 @@ static inline unsigned long p4d_page_vaddr(p4d_t p4d)* Currently stuck as a macro due to indirect forward reference to * linux/mmzone.h's __section_mem_map_addr() definition: */ -#define p4d_page (p4d) \ - pfn_to_page((p4d_val(p4d) & p4d_pfn_mask(p4d)) >> PAGE_SHIFT) +#define p4d_page (p4d) pfn_to_page(p4d_pfn(p4d))/* Find an entry in the third-level page table.. */ static inline pud_t *pud_offset (p4d_t *p4d,unsigned long address)
@@ -859,7 +861,7 @@ static inline unsigned long pgd_page_vaddr(pgd_t pgd)* Currently stuck as a macro due to indirect forward reference to * linux/mmzone.h's __section_mem_map_addr() definition: */ -#define pgd_page (pgd) pfn_to_page(pgd_val(pgd) >> PAGE_SHIFT) +#define pgd_page (pgd) pfn_to_page(pgd_pfn(pgd))/* to find an entry in a page-table-directory. */ static inline p4d_t *p4d_offset (pgd_t *pgd,unsigned long address)
PATCH v10 10/38 x86/mm: Provide general kernel support for memory encryption
In reply to Tom LendackyChanges to the existing page table macros will allow the SME support to be enabled in a simple fashion with minimal changes to files that use these macros. Since the memory encryption mask will now be part of the regular pagetable macros, we introduce two new macros (_PAGE_TABLE_NOENC and _KERNPG_TABLE_NOENC) to allow for early pagetable creation/initialization without the encryption mask before SME becomes active. Two new pgprot() macros are defined to allow setting or clearing the page encryption mask.
The FIXMAP_PAGE_NOCACHE define is introduced for use with MMIO. SME does not support encryption for MMIO areas so this define removes the encryption mask from the page attribute.
Two new macros are introduced (__sme_pa() / __sme_pa_nodebug()) to allow creating a physical address with the encryption mask. These are used when working with the cr3 register so that the PGD can be encrypted. The current __va() macro is updated so that the virtual address is generated based off of the physical address without the encryption mask thus allowing the same virtual address to be generated regardless of whether encryption is enabled for that physical location or not.
Also, an early initialization function is added for SME. If SME is active, this function:
- Updates the early_pmd_flags so that early page faults create mappings with the encryption mask.
- Updates the __supported_pte_mask to include the encryption mask.
- Updates the protection_map entries to include the encryption mask so that user-space allocations will automatically have the encryption mask applied.
--- arch/x86/boot/compressed/pagetable.c | 7 ++++++ arch/x86/include/asm/fixmap.h | 7 ++++++ arch/x86/include/asm/mem_encrypt.h | 13 +++++++++++ arch/x86/include/asm/page_types.h | 3 ++- arch/x86/include/asm/pgtable.h | 9 ++++++++ arch/x86/include/asm/pgtable_types.h | 45 +++++++++++++++++++++++------------- arch/x86/include/asm/processor.h | 3 ++- arch/x86/kernel/espfix_64.c | 2 +- arch/x86/kernel/head64.c | 11 +++++++-- arch/x86/kernel/head_64.S | 20 ++++++++-------- arch/x86/mm/kasan_init_64.c | 4 ++-- arch/x86/mm/mem_encrypt.c | 17 ++++++++++++++ arch/x86/mm/pageattr.c | 3 +++ arch/x86/mm/tlb.c | 4 ++-- include/asm-generic/pgtable.h | 12 ++++++++++ include/linux/mem_encrypt.h | 8 +++++++ 16 files changed, 133 insertions(+), 35 deletions(-)
arch/x86/boot/compressed/pagetable.c +7 -0
@@ -15,6 +15,13 @@#define __pa (x) ((unsigned long)(x))#define __va (x) ((void *)((unsigned long)(x))) +/* +* The pgtable.h and mm/ident_map.c includes make use of the SME related +* information which is not used in the compressed image support. Un-define +* the SME support to avoid any compile and link errors. +*/ +#undef CONFIG_AMD_MEM_ENCRYPT +#include "misc.h" /* These actually do the work of building the kernel identity maps. */
arch/x86/include/asm/fixmap.h +7 -0
@@ -157,6 +157,13 @@ static inline void __set_fixmap(enum fixed_addresses idx, }#endif +/* +* FIXMAP_PAGE_NOCACHE is used for MMIO. Memory encryption is not +* supported for MMIO addresses, so make sure that the memory encryption +* mask is not part of the page attributes. +*/ +#define FIXMAP_PAGE_NOCACHE PAGE_KERNEL_IO_NOCACHE +#include <asm-generic/fixmap.h> #define __late_set_fixmap (idx, phys, flags) __set_fixmap(idx, phys, flags)
arch/x86/include/asm/mem_encrypt.h +13 -0
@@ -21,6 +21,8 @@extern unsigned long sme_me_mask; +void __init sme_early_init (void ); +void __init sme_encrypt_kernel (void );void __init sme_enable (void );
@@ -28,11 +30,22 @@#define sme_me_mask 0UL +static inline void __init sme_early_init (void ) { } +static inline void __init sme_encrypt_kernel (void ) { }static inline void __init sme_enable (void ) { }#endif /* CONFIG_AMD_MEM_ENCRYPT */ +/* +* The __sme_pa() and __sme_pa_nodebug() macros are meant for use when +* writing to or comparing values from the cr3 register. Having the +* encryption mask set in cr3 enables the PGD entry to be encrypted and +* avoid special case handling of PGD allocations. +*/ +#define __sme_pa (x) (__pa(x) | sme_me_mask) +#define __sme_pa_nodebug (x) (__pa_nodebug(x) | sme_me_mask) +#endif /* __ASSEMBLY__ */ #endif /* __X86_MEM_ENCRYPT_H__ */
arch/x86/include/asm/page_types.h +2 -1
@@ -3,6 +3,7 @@#include <linux/const.h> #include <linux/types.h> +#include <linux/mem_encrypt.h> /* PAGE_SHIFT determines the page size */ #define PAGE_SHIFT 12
@@ -15,7 +16,7 @@#define PUD_PAGE_SIZE (_AC(1, UL) << PUD_SHIFT)#define PUD_PAGE_MASK (~(PUD_PAGE_SIZE-1)) -#define __PHYSICAL_MASK ((phys_addr_t)((1ULL << __PHYSICAL_MASK_SHIFT) - 1)) +#define __PHYSICAL_MASK ((phys_addr_t)(__sme_clr((1ULL << __PHYSICAL_MASK_SHIFT) - 1)))#define __VIRTUAL_MASK ((1UL << __VIRTUAL_MASK_SHIFT) - 1)/* Cast *PAGE_MASK to a signed type so that it is sign-extended if
arch/x86/include/asm/pgtable.h +9 -0
@@ -1,6 +1,7 @@#ifndef _ASM_X86_PGTABLE_H#define _ASM_X86_PGTABLE_H +#include <linux/mem_encrypt.h> #include <asm/page.h> #include <asm/pgtable_types.h>
@@ -13,6 +14,12 @@ cachemode2protval(_PAGE_CACHE_MODE_UC_MINUS))) \ : (prot)) +/* +* Macros to add or remove encryption attribute +*/ +#define pgprot_encrypted (prot) __pgprot(__sme_set(pgprot_val(prot))) +#define pgprot_decrypted (prot) __pgprot(__sme_clr(pgprot_val(prot))) +#ifndef __ASSEMBLY__#include <asm/x86_init.h>
@@ -38,6 +45,8 @@extern struct mm_struct *pgd_page_get_mm (struct page *page); +extern pmdval_t early_pmd_flags; +#ifdef CONFIG_PARAVIRT #include <asm/paravirt.h> #else /* !CONFIG_PARAVIRT */
arch/x86/include/asm/pgtable_types.h +29 -16
63 lines not on this page · raw message
arch/x86/include/asm/processor.h +2 -1
@@ -29,6 +29,7 @@#include <linux/math64.h> #include <linux/err.h> #include <linux/irqflags.h> +#include <linux/mem_encrypt.h> /* * We handle most unaligned accesses in hardware. On the other hand
@@ -241,7 +242,7 @@ static inline unsigned long read_cr3_pa(void)static inline void load_cr3 (pgd_t *pgdir) { -write_cr3 (__pa (pgdir)); +write_cr3 (__sme_pa (pgdir)); }#ifdef CONFIG_X86_32
arch/x86/kernel/espfix_64.c +1 -1
@@ -195,7 +195,7 @@ void init_espfix_ap(int cpu) pte_p =pte_offset_kernel (&pmd, addr); stack_page =page_address (alloc_pages_node (node,GFP_KERNEL ,0 )); - pte =__pte (__pa (stack_page) | (__PAGE_KERNEL_RO & ptemask)); + pte =__pte (__pa (stack_page) | ((__PAGE_KERNEL_RO | _PAGE_ENC) & ptemask));for (n =0 ; n <ESPFIX_PTE_CLONES ; n++)set_pte (&pte_p[n*PTE_STRIDE ], pte);
arch/x86/kernel/head64.c +9 -2
@@ -102,7 +102,7 @@ unsigned long __head __startup_64(unsigned long physaddr) pud =fixup_pointer (early_dynamic_pgts[next_early_pgt++], physaddr); pmd =fixup_pointer (early_dynamic_pgts[next_early_pgt++], physaddr); - pgtable_flags = _KERNPG_TABLE +sme_get_me_mask (); + pgtable_flags = _KERNPG_TABLE_NOENC +sme_get_me_mask ();if (IS_ENABLED (CONFIG_X86_5LEVEL )) { p4d =fixup_pointer (early_dynamic_pgts[next_early_pgt++], physaddr);
@@ -177,7 +177,7 @@ static void __init reset_early_page_tables(void) {memset (early_top_pgt,0 ,sizeof (pgd_t)*(PTRS_PER_PGD -1 )); next_early_pgt =0 ; -write_cr3 (__pa_nodebug (early_top_pgt)); +write_cr3 (__sme_pa_nodebug (early_top_pgt)); }/* Create a new PMD entry */
@@ -310,6 +310,13 @@ asmlinkage __visible void __init x86_64_start_kernel(char * real_mode_data)clear_page (init_top_pgt); +/* +* SME support may update early_pmd_flags to include the memory +* encryption mask, so it needs to be called before anything +* that may generate a page fault. +*/ +sme_early_init (); +kasan_early_init ();for (i =0 ; i <NUM_EXCEPTION_VECTORS ; i++)
arch/x86/kernel/head_64.S +10 -10
@@ -351,9 +351,9 @@ GLOBAL(name) NEXT_PAGE(early_top_pgt) .fill 511,8,0 #ifdef CONFIG_X86_5LEVEL - .quad level4_kernel_pgt - __START_KERNEL_map + _PAGE_TABLE + .quad level4_kernel_pgt - __START_KERNEL_map + _PAGE_TABLE_NOENC #else - .quad level3_kernel_pgt - __START_KERNEL_map + _PAGE_TABLE + .quad level3_kernel_pgt - __START_KERNEL_map + _PAGE_TABLE_NOENC #endif NEXT_PAGE(early_dynamic_pgts)
@@ -366,15 +366,15 @@ NEXT_PAGE(init_top_pgt) .fill 512,8,0 #else NEXT_PAGE(init_top_pgt) - .quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE + .quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE_NOENC .org init_top_pgt + PGD_PAGE_OFFSET*8, 0 - .quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE + .quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE_NOENC .org init_top_pgt + PGD_START_KERNEL*8, 0 /* (2^48-(2*1024*1024*1024))/(2^39) = 511 */ - .quad level3_kernel_pgt - __START_KERNEL_map + _PAGE_TABLE + .quad level3_kernel_pgt - __START_KERNEL_map + _PAGE_TABLE_NOENC NEXT_PAGE(level3_ident_pgt) - .quad level2_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE + .quad level2_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE_NOENC .fill 511, 8, 0 NEXT_PAGE(level2_ident_pgt) /* Since I easily can, map the first 1G.
@@ -386,14 +386,14 @@ NEXT_PAGE(level2_ident_pgt) #ifdef CONFIG_X86_5LEVEL NEXT_PAGE(level4_kernel_pgt) .fill 511,8,0 - .quad level3_kernel_pgt - __START_KERNEL_map + _PAGE_TABLE + .quad level3_kernel_pgt - __START_KERNEL_map + _PAGE_TABLE_NOENC #endif NEXT_PAGE(level3_kernel_pgt) .fill L3_START_KERNEL,8,0 /* (2^48-(2*1024*1024*1024)-((2^39)*511))/(2^30) = 510 */ - .quad level2_kernel_pgt - __START_KERNEL_map + _KERNPG_TABLE - .quad level2_fixmap_pgt - __START_KERNEL_map + _PAGE_TABLE + .quad level2_kernel_pgt - __START_KERNEL_map + _KERNPG_TABLE_NOENC + .quad level2_fixmap_pgt - __START_KERNEL_map + _PAGE_TABLE_NOENC NEXT_PAGE(level2_kernel_pgt) /*
@@ -411,7 +411,7 @@ NEXT_PAGE(level2_kernel_pgt) NEXT_PAGE(level2_fixmap_pgt) .fill 506,8,0 - .quad level1_fixmap_pgt - __START_KERNEL_map + _PAGE_TABLE + .quad level1_fixmap_pgt - __START_KERNEL_map + _PAGE_TABLE_NOENC /* 8MB reserved for vsyscalls + a 2MB hole = 4 + 1 entries */ .fill 5,8,0
arch/x86/mm/kasan_init_64.c +2 -2
@@ -87,7 +87,7 @@ static int kasan_die_handler(struct notifier_block *self,void __init kasan_early_init (void ) {int i; -pteval_t pte_val =__pa_nodebug (kasan_zero_page) | __PAGE_KERNEL; +pteval_t pte_val =__pa_nodebug (kasan_zero_page) | __PAGE_KERNEL | _PAGE_ENC;pmdval_t pmd_val =__pa_nodebug (kasan_zero_pte) | _KERNPG_TABLE;pudval_t pud_val =__pa_nodebug (kasan_zero_pmd) | _KERNPG_TABLE;p4dval_t p4d_val =__pa_nodebug (kasan_zero_pud) | _KERNPG_TABLE;
@@ -153,7 +153,7 @@ void __init kasan_init(void)*/ memset (kasan_zero_page,0 ,PAGE_SIZE );for (i =0 ; i <PTRS_PER_PTE ; i++) { -pte_t pte =__pte (__pa (kasan_zero_page) | __PAGE_KERNEL_RO); +pte_t pte =__pte (__pa (kasan_zero_page) | __PAGE_KERNEL_RO | _PAGE_ENC);set_pte (&kasan_zero_pte[i], pte); }/* Flush TLBs again to be sure that write protection applied. */
arch/x86/mm/mem_encrypt.c +17 -0
@@ -12,6 +12,7 @@#include <linux/linkage.h> #include <linux/init.h> +#include <linux/mm.h> /* * Since SME related variables are set early in the boot process they must
@@ -21,6 +22,22 @@ unsigned long sme_me_mask __section(.data) = 0;EXPORT_SYMBOL_GPL (sme_me_mask); +void __init sme_early_init (void ) +{ +unsigned int i; + +if (!sme_me_mask) +return ; + + early_pmd_flags =__sme_set (early_pmd_flags); + + __supported_pte_mask =__sme_set (__supported_pte_mask); + +/* Update the protection map with memory encryption mask */ +for (i =0 ; i <ARRAY_SIZE (protection_map); i++) + protection_map[i] =pgprot_encrypted (protection_map[i]); +} +void __init sme_encrypt_kernel (void ) { }
arch/x86/mm/pageattr.c +3 -0
@@ -2020,6 +2020,9 @@ int kernel_map_pages_in_pgd(pgd_t *pgd, u64 pfn, unsigned long address,if (!(page_flags & _PAGE_RW)) cpa.mask_clr =__pgprot (_PAGE_RW); +if (!(page_flags & _PAGE_ENC)) + cpa.mask_clr =pgprot_encrypted (cpa.mask_clr); + cpa.mask_set =__pgprot (_PAGE_PRESENT | page_flags); retval =__change_page_attr_set_clr (&cpa,0 );
arch/x86/mm/tlb.c +2 -2
@@ -115,7 +115,7 @@ void switch_mm_irqs_off(struct mm_struct *prev, struct mm_struct *next,*/ this_cpu_write (cpu_tlbstate.ctxs[0 ].tlb_gen, next_tlb_gen); -write_cr3 (__pa (next->pgd)); +write_cr3 (__sme_pa (next->pgd));trace_tlb_flush (TLB_FLUSH_ON_TASK_SWITCH ,TLB_FLUSH_ALL ); }
@@ -157,7 +157,7 @@ void switch_mm_irqs_off(struct mm_struct *prev, struct mm_struct *next,this_cpu_write (cpu_tlbstate.ctxs[0 ].ctx_id, next->context.ctx_id);this_cpu_write (cpu_tlbstate.ctxs[0 ].tlb_gen, next_tlb_gen);this_cpu_write (cpu_tlbstate.loaded_mm, next); -write_cr3 (__pa (next->pgd)); +write_cr3 (__sme_pa (next->pgd));trace_tlb_flush (TLB_FLUSH_ON_TASK_SWITCH ,TLB_FLUSH_ALL ); }
include/asm-generic/pgtable.h +12 -0
@@ -583,6 +583,18 @@ static inline void ptep_modify_prot_commit(struct mm_struct *mm,#endif /* CONFIG_MMU */ /* +* No-op macros that just return the current protection value. Defined here +* because these macros can be used used even if CONFIG_MMU is not defined. +*/ +#ifndef pgprot_encrypted +#define pgprot_encrypted (prot) (prot) +#endif + +#ifndef pgprot_decrypted +#define pgprot_decrypted (prot) (prot) +#endif + +/* * A facility to provide lazy MMU batching. This allows PTE updates and * page invalidations to be delayed until a call to leave lazy MMU mode * is issued. Some architectures may benefit from doing this, and it is
include/linux/mem_encrypt.h +8 -0
@@ -35,6 +35,14 @@ static inline unsigned long sme_get_me_mask(void)return sme_me_mask; } +/* +* The __sme_set() and __sme_clr() macros are useful for adding or removing +* the encryption mask from a value (e.g. when dealing with pagetable +* entries). +*/ +#define __sme_set (x) ((unsigned long)(x) | sme_me_mask) +#define __sme_clr (x) ((unsigned long)(x) & ~sme_me_mask) +#endif /* __ASSEMBLY__ */ #endif /* __MEM_ENCRYPT_H__ */
Signature · 7 lines
1.9.1 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
tip-bot for Tom Lendacky
merge bot[tip:x86/mm] x86/mm: Provide general kernel support for memory encryption
x86/mm: Provide general kernel support for memory encryption
Commit-ID: 21729f81ce8ae76a6995681d40e16f7ce8075db4 Gitweb: http://git.kernel.org/tip/21729f81ce8ae76a6995681d40e16f7ce8075db4 Author: Tom Lendacky <[email protected]> AuthorDate: Mon, 17 Jul 2017 16:10:07 -0500 Committer: Ingo Molnar <[email protected]> CommitDate: Tue, 18 Jul 2017 11:38:00 +0200
x86/mm: Provide general kernel support for memory encryption
Changes to the existing page table macros will allow the SME support to be enabled in a simple fashion with minimal changes to files that use these macros. Since the memory encryption mask will now be part of the regular pagetable macros, we introduce two new macros (_PAGE_TABLE_NOENC and _KERNPG_TABLE_NOENC) to allow for early pagetable creation/initialization without the encryption mask before SME becomes active. Two new pgprot() macros are defined to allow setting or clearing the page encryption mask.
The FIXMAP_PAGE_NOCACHE define is introduced for use with MMIO. SME does not support encryption for MMIO areas so this define removes the encryption mask from the page attribute.
Two new macros are introduced (__sme_pa() / __sme_pa_nodebug()) to allow creating a physical address with the encryption mask. These are used when working with the cr3 register so that the PGD can be encrypted. The current __va() macro is updated so that the virtual address is generated based off of the physical address without the encryption mask thus allowing the same virtual address to be generated regardless of whether encryption is enabled for that physical location or not.
Also, an early initialization function is added for SME. If SME is active, this function:
- Updates the early_pmd_flags so that early page faults create mappings with the encryption mask.
- Updates the __supported_pte_mask to include the encryption mask.
- Updates the protection_map entries to include the encryption mask so that user-space allocations will automatically have the encryption mask applied.
--- arch/x86/boot/compressed/pagetable.c | 7 ++++++ arch/x86/include/asm/fixmap.h | 7 ++++++ arch/x86/include/asm/mem_encrypt.h | 13 +++++++++++ arch/x86/include/asm/page_types.h | 3 ++- arch/x86/include/asm/pgtable.h | 9 ++++++++ arch/x86/include/asm/pgtable_types.h | 45 +++++++++++++++++++++++------------- arch/x86/include/asm/processor.h | 3 ++- arch/x86/kernel/espfix_64.c | 2 +- arch/x86/kernel/head64.c | 11 +++++++-- arch/x86/kernel/head_64.S | 20 ++++++++-------- arch/x86/mm/kasan_init_64.c | 4 ++-- arch/x86/mm/mem_encrypt.c | 17 ++++++++++++++ arch/x86/mm/pageattr.c | 3 +++ arch/x86/mm/tlb.c | 4 ++-- include/asm-generic/pgtable.h | 12 ++++++++++ include/linux/mem_encrypt.h | 8 +++++++ 16 files changed, 133 insertions(+), 35 deletions(-)
arch/x86/boot/compressed/pagetable.c +7 -0
@@ -15,6 +15,13 @@#define __pa (x) ((unsigned long)(x))#define __va (x) ((void *)((unsigned long)(x))) +/* +* The pgtable.h and mm/ident_map.c includes make use of the SME related +* information which is not used in the compressed image support. Un-define +* the SME support to avoid any compile and link errors. +*/ +#undef CONFIG_AMD_MEM_ENCRYPT +#include "misc.h" /* These actually do the work of building the kernel identity maps. */
arch/x86/include/asm/fixmap.h +7 -0
@@ -157,6 +157,13 @@ static inline void __set_fixmap(enum fixed_addresses idx, }#endif +/* +* FIXMAP_PAGE_NOCACHE is used for MMIO. Memory encryption is not +* supported for MMIO addresses, so make sure that the memory encryption +* mask is not part of the page attributes. +*/ +#define FIXMAP_PAGE_NOCACHE PAGE_KERNEL_IO_NOCACHE +#include <asm-generic/fixmap.h> #define __late_set_fixmap (idx, phys, flags) __set_fixmap(idx, phys, flags)
arch/x86/include/asm/mem_encrypt.h +13 -0
@@ -21,6 +21,8 @@extern unsigned long sme_me_mask; +void __init sme_early_init (void ); +void __init sme_encrypt_kernel (void );void __init sme_enable (void );
@@ -28,11 +30,22 @@ void __init sme_enable(void);#define sme_me_mask 0UL +static inline void __init sme_early_init (void ) { } +static inline void __init sme_encrypt_kernel (void ) { }static inline void __init sme_enable (void ) { }#endif /* CONFIG_AMD_MEM_ENCRYPT */ +/* +* The __sme_pa() and __sme_pa_nodebug() macros are meant for use when +* writing to or comparing values from the cr3 register. Having the +* encryption mask set in cr3 enables the PGD entry to be encrypted and +* avoid special case handling of PGD allocations. +*/ +#define __sme_pa (x) (__pa(x) | sme_me_mask) +#define __sme_pa_nodebug (x) (__pa_nodebug(x) | sme_me_mask) +#endif /* __ASSEMBLY__ */ #endif /* __X86_MEM_ENCRYPT_H__ */
arch/x86/include/asm/page_types.h +2 -1
@@ -3,6 +3,7 @@#include <linux/const.h> #include <linux/types.h> +#include <linux/mem_encrypt.h> /* PAGE_SHIFT determines the page size */ #define PAGE_SHIFT 12
@@ -15,7 +16,7 @@#define PUD_PAGE_SIZE (_AC(1, UL) << PUD_SHIFT)#define PUD_PAGE_MASK (~(PUD_PAGE_SIZE-1)) -#define __PHYSICAL_MASK ((phys_addr_t)((1ULL << __PHYSICAL_MASK_SHIFT) - 1)) +#define __PHYSICAL_MASK ((phys_addr_t)(__sme_clr((1ULL << __PHYSICAL_MASK_SHIFT) - 1)))#define __VIRTUAL_MASK ((1UL << __VIRTUAL_MASK_SHIFT) - 1)/* Cast *PAGE_MASK to a signed type so that it is sign-extended if
arch/x86/include/asm/pgtable.h +9 -0
@@ -1,6 +1,7 @@#ifndef _ASM_X86_PGTABLE_H#define _ASM_X86_PGTABLE_H +#include <linux/mem_encrypt.h> #include <asm/page.h> #include <asm/pgtable_types.h>
@@ -13,6 +14,12 @@ cachemode2protval(_PAGE_CACHE_MODE_UC_MINUS))) \ : (prot)) +/* +* Macros to add or remove encryption attribute +*/ +#define pgprot_encrypted (prot) __pgprot(__sme_set(pgprot_val(prot))) +#define pgprot_decrypted (prot) __pgprot(__sme_clr(pgprot_val(prot))) +#ifndef __ASSEMBLY__#include <asm/x86_init.h>
@@ -38,6 +45,8 @@ extern struct list_head pgd_list;extern struct mm_struct *pgd_page_get_mm (struct page *page); +extern pmdval_t early_pmd_flags; +#ifdef CONFIG_PARAVIRT #include <asm/paravirt.h> #else /* !CONFIG_PARAVIRT */
arch/x86/include/asm/pgtable_types.h +29 -16
63 lines not on this page · raw message
arch/x86/include/asm/processor.h +2 -1
@@ -29,6 +29,7 @@ struct vm86;#include <linux/math64.h> #include <linux/err.h> #include <linux/irqflags.h> +#include <linux/mem_encrypt.h> /* * We handle most unaligned accesses in hardware. On the other hand
@@ -241,7 +242,7 @@ static inline unsigned long read_cr3_pa(void)static inline void load_cr3 (pgd_t *pgdir) { -write_cr3 (__pa (pgdir)); +write_cr3 (__sme_pa (pgdir)); }#ifdef CONFIG_X86_32
arch/x86/kernel/espfix_64.c +1 -1
@@ -195,7 +195,7 @@ void init_espfix_ap(int cpu) pte_p =pte_offset_kernel (&pmd, addr); stack_page =page_address (alloc_pages_node (node,GFP_KERNEL ,0 )); - pte =__pte (__pa (stack_page) | (__PAGE_KERNEL_RO & ptemask)); + pte =__pte (__pa (stack_page) | ((__PAGE_KERNEL_RO | _PAGE_ENC) & ptemask));for (n =0 ; n <ESPFIX_PTE_CLONES ; n++)set_pte (&pte_p[n*PTE_STRIDE ], pte);
arch/x86/kernel/head64.c +9 -2
@@ -102,7 +102,7 @@ unsigned long __head __startup_64(unsigned long physaddr) pud =fixup_pointer (early_dynamic_pgts[next_early_pgt++], physaddr); pmd =fixup_pointer (early_dynamic_pgts[next_early_pgt++], physaddr); - pgtable_flags = _KERNPG_TABLE +sme_get_me_mask (); + pgtable_flags = _KERNPG_TABLE_NOENC +sme_get_me_mask ();if (IS_ENABLED (CONFIG_X86_5LEVEL )) { p4d =fixup_pointer (early_dynamic_pgts[next_early_pgt++], physaddr);
@@ -177,7 +177,7 @@ static void __init reset_early_page_tables(void) {memset (early_top_pgt,0 ,sizeof (pgd_t)*(PTRS_PER_PGD -1 )); next_early_pgt =0 ; -write_cr3 (__pa_nodebug (early_top_pgt)); +write_cr3 (__sme_pa_nodebug (early_top_pgt)); }/* Create a new PMD entry */
@@ -310,6 +310,13 @@ asmlinkage __visible void __init x86_64_start_kernel(char * real_mode_data)clear_page (init_top_pgt); +/* +* SME support may update early_pmd_flags to include the memory +* encryption mask, so it needs to be called before anything +* that may generate a page fault. +*/ +sme_early_init (); +kasan_early_init ();for (i =0 ; i <NUM_EXCEPTION_VECTORS ; i++)
arch/x86/kernel/head_64.S +10 -10
@@ -351,9 +351,9 @@ GLOBAL(name) NEXT_PAGE(early_top_pgt) .fill 511,8,0 #ifdef CONFIG_X86_5LEVEL - .quad level4_kernel_pgt - __START_KERNEL_map + _PAGE_TABLE + .quad level4_kernel_pgt - __START_KERNEL_map + _PAGE_TABLE_NOENC #else - .quad level3_kernel_pgt - __START_KERNEL_map + _PAGE_TABLE + .quad level3_kernel_pgt - __START_KERNEL_map + _PAGE_TABLE_NOENC #endif NEXT_PAGE(early_dynamic_pgts)
@@ -366,15 +366,15 @@ NEXT_PAGE(init_top_pgt) .fill 512,8,0 #else NEXT_PAGE(init_top_pgt) - .quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE + .quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE_NOENC .org init_top_pgt + PGD_PAGE_OFFSET*8, 0 - .quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE + .quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE_NOENC .org init_top_pgt + PGD_START_KERNEL*8, 0 /* (2^48-(2*1024*1024*1024))/(2^39) = 511 */ - .quad level3_kernel_pgt - __START_KERNEL_map + _PAGE_TABLE + .quad level3_kernel_pgt - __START_KERNEL_map + _PAGE_TABLE_NOENC NEXT_PAGE(level3_ident_pgt) - .quad level2_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE + .quad level2_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE_NOENC .fill 511, 8, 0 NEXT_PAGE(level2_ident_pgt) /* Since I easily can, map the first 1G.
@@ -386,14 +386,14 @@ NEXT_PAGE(level2_ident_pgt) #ifdef CONFIG_X86_5LEVEL NEXT_PAGE(level4_kernel_pgt) .fill 511,8,0 - .quad level3_kernel_pgt - __START_KERNEL_map + _PAGE_TABLE + .quad level3_kernel_pgt - __START_KERNEL_map + _PAGE_TABLE_NOENC #endif NEXT_PAGE(level3_kernel_pgt) .fill L3_START_KERNEL,8,0 /* (2^48-(2*1024*1024*1024)-((2^39)*511))/(2^30) = 510 */ - .quad level2_kernel_pgt - __START_KERNEL_map + _KERNPG_TABLE - .quad level2_fixmap_pgt - __START_KERNEL_map + _PAGE_TABLE + .quad level2_kernel_pgt - __START_KERNEL_map + _KERNPG_TABLE_NOENC + .quad level2_fixmap_pgt - __START_KERNEL_map + _PAGE_TABLE_NOENC NEXT_PAGE(level2_kernel_pgt) /*
@@ -411,7 +411,7 @@ NEXT_PAGE(level2_kernel_pgt) NEXT_PAGE(level2_fixmap_pgt) .fill 506,8,0 - .quad level1_fixmap_pgt - __START_KERNEL_map + _PAGE_TABLE + .quad level1_fixmap_pgt - __START_KERNEL_map + _PAGE_TABLE_NOENC /* 8MB reserved for vsyscalls + a 2MB hole = 4 + 1 entries */ .fill 5,8,0
arch/x86/mm/kasan_init_64.c +2 -2
@@ -87,7 +87,7 @@ static struct notifier_block kasan_die_notifier = {void __init kasan_early_init (void ) {int i; -pteval_t pte_val =__pa_nodebug (kasan_zero_page) | __PAGE_KERNEL; +pteval_t pte_val =__pa_nodebug (kasan_zero_page) | __PAGE_KERNEL | _PAGE_ENC;pmdval_t pmd_val =__pa_nodebug (kasan_zero_pte) | _KERNPG_TABLE;pudval_t pud_val =__pa_nodebug (kasan_zero_pmd) | _KERNPG_TABLE;p4dval_t p4d_val =__pa_nodebug (kasan_zero_pud) | _KERNPG_TABLE;
@@ -153,7 +153,7 @@ void __init kasan_init(void)*/ memset (kasan_zero_page,0 ,PAGE_SIZE );for (i =0 ; i <PTRS_PER_PTE ; i++) { -pte_t pte =__pte (__pa (kasan_zero_page) | __PAGE_KERNEL_RO); +pte_t pte =__pte (__pa (kasan_zero_page) | __PAGE_KERNEL_RO | _PAGE_ENC);set_pte (&kasan_zero_pte[i], pte); }/* Flush TLBs again to be sure that write protection applied. */
arch/x86/mm/mem_encrypt.c +17 -0
@@ -12,6 +12,7 @@#include <linux/linkage.h> #include <linux/init.h> +#include <linux/mm.h> /* * Since SME related variables are set early in the boot process they must
@@ -21,6 +22,22 @@ unsigned long sme_me_mask __section(.data) = 0;EXPORT_SYMBOL_GPL (sme_me_mask); +void __init sme_early_init (void ) +{ +unsigned int i; + +if (!sme_me_mask) +return ; + + early_pmd_flags =__sme_set (early_pmd_flags); + + __supported_pte_mask =__sme_set (__supported_pte_mask); + +/* Update the protection map with memory encryption mask */ +for (i =0 ; i <ARRAY_SIZE (protection_map); i++) + protection_map[i] =pgprot_encrypted (protection_map[i]); +} +void __init sme_encrypt_kernel (void ) { }
arch/x86/mm/pageattr.c +3 -0
@@ -2020,6 +2020,9 @@ int kernel_map_pages_in_pgd(pgd_t *pgd, u64 pfn, unsigned long address,if (!(page_flags & _PAGE_RW)) cpa.mask_clr =__pgprot (_PAGE_RW); +if (!(page_flags & _PAGE_ENC)) + cpa.mask_clr =pgprot_encrypted (cpa.mask_clr); + cpa.mask_set =__pgprot (_PAGE_PRESENT | page_flags); retval =__change_page_attr_set_clr (&cpa,0 );
arch/x86/mm/tlb.c +2 -2
@@ -115,7 +115,7 @@ void switch_mm_irqs_off(struct mm_struct *prev, struct mm_struct *next,*/ this_cpu_write (cpu_tlbstate.ctxs[0 ].tlb_gen, next_tlb_gen); -write_cr3 (__pa (next->pgd)); +write_cr3 (__sme_pa (next->pgd));trace_tlb_flush (TLB_FLUSH_ON_TASK_SWITCH ,TLB_FLUSH_ALL ); }
@@ -157,7 +157,7 @@ void switch_mm_irqs_off(struct mm_struct *prev, struct mm_struct *next,this_cpu_write (cpu_tlbstate.ctxs[0 ].ctx_id, next->context.ctx_id);this_cpu_write (cpu_tlbstate.ctxs[0 ].tlb_gen, next_tlb_gen);this_cpu_write (cpu_tlbstate.loaded_mm, next); -write_cr3 (__pa (next->pgd)); +write_cr3 (__sme_pa (next->pgd));trace_tlb_flush (TLB_FLUSH_ON_TASK_SWITCH ,TLB_FLUSH_ALL ); }
include/asm-generic/pgtable.h +12 -0
@@ -583,6 +583,18 @@ static inline void ptep_modify_prot_commit(struct mm_struct *mm,#endif /* CONFIG_MMU */ /* +* No-op macros that just return the current protection value. Defined here +* because these macros can be used used even if CONFIG_MMU is not defined. +*/ +#ifndef pgprot_encrypted +#define pgprot_encrypted (prot) (prot) +#endif + +#ifndef pgprot_decrypted +#define pgprot_decrypted (prot) (prot) +#endif + +/* * A facility to provide lazy MMU batching. This allows PTE updates and * page invalidations to be delayed until a call to leave lazy MMU mode * is issued. Some architectures may benefit from doing this, and it is
include/linux/mem_encrypt.h +8 -0
@@ -35,6 +35,14 @@ static inline unsigned long sme_get_me_mask(void)return sme_me_mask; } +/* +* The __sme_set() and __sme_clr() macros are useful for adding or removing +* the encryption mask from a value (e.g. when dealing with pagetable +* entries). +*/ +#define __sme_set (x) ((unsigned long)(x) | sme_me_mask) +#define __sme_clr (x) ((unsigned long)(x) & ~sme_me_mask) +#endif /* __ASSEMBLY__ */ #endif /* __MEM_ENCRYPT_H__ */
PATCH v10 11/38 x86/mm: Add SME support for read_cr3_pa()
In reply to Tom LendackyThe cr3 register entry can contain the SME encryption mask that indicates the PGD is encrypted. The encryption mask should not be used when creating a virtual address from the cr3 register, so remove the SME encryption mask in the read_cr3_pa() function.
During early boot SME will need to use a native version of read_cr3_pa(), so create native_read_cr3_pa().
--- arch/x86/include/asm/processor-flags.h | 5 +++-- arch/x86/include/asm/processor.h | 5 +++++ 2 files changed, 8 insertions(+), 2 deletions(-)
arch/x86/include/asm/processor-flags.h +3 -2
@@ -2,6 +2,7 @@#define _ASM_X86_PROCESSOR_FLAGS_H#include <uapi/asm/processor-flags.h> +#include <linux/mem_encrypt.h> #ifdef CONFIG_VM86 #define X86_VM_MASK X86_EFLAGS_VM
@@ -32,8 +33,8 @@* CR3_ADDR_MASK is the mask used by read_cr3_pa(). */ #ifdef CONFIG_X86_64 -/* Mask off the address space ID bits. */ -#define CR3_ADDR_MASK 0x7FFFFFFFFFFFF000ull +/* Mask off the address space ID and SME encryption bits. */ +#define CR3_ADDR_MASK __sme_clr(0x7FFFFFFFFFFFF000ull)#define CR3_PCID_MASK 0xFFFull#else /*
arch/x86/include/asm/processor.h +5 -0
@@ -240,6 +240,11 @@ static inline unsigned long read_cr3_pa(void)return __read_cr3 () &CR3_ADDR_MASK ; } +static inline unsigned long native_read_cr3_pa (void ) +{ +return __native_read_cr3 () &CR3_ADDR_MASK ; +} +static inline void load_cr3 (pgd_t *pgdir) {write_cr3 (__sme_pa (pgdir));
Signature · 7 lines
1.9.1 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
tip-bot for Tom Lendacky
merge bot[tip:x86/mm] x86/mm: Add SME support for read_cr3_pa()
x86/mm: Add SME support for read_cr3_pa()
Commit-ID: eef9c4abe77f55b1600f59d8ac5f1d953e2f5384 Gitweb: http://git.kernel.org/tip/eef9c4abe77f55b1600f59d8ac5f1d953e2f5384 Author: Tom Lendacky <[email protected]> AuthorDate: Mon, 17 Jul 2017 16:10:08 -0500 Committer: Ingo Molnar <[email protected]> CommitDate: Tue, 18 Jul 2017 11:38:00 +0200
x86/mm: Add SME support for read_cr3_pa()
The CR3 register entry can contain the SME encryption mask that indicates the PGD is encrypted. The encryption mask should not be used when creating a virtual address from the CR3 register, so remove the SME encryption mask in the read_cr3_pa() function.
During early boot SME will need to use a native version of read_cr3_pa(), so create native_read_cr3_pa().
--- arch/x86/include/asm/processor-flags.h | 5 +++-- arch/x86/include/asm/processor.h | 5 +++++ 2 files changed, 8 insertions(+), 2 deletions(-)
arch/x86/include/asm/processor-flags.h +3 -2
@@ -2,6 +2,7 @@#define _ASM_X86_PROCESSOR_FLAGS_H#include <uapi/asm/processor-flags.h> +#include <linux/mem_encrypt.h> #ifdef CONFIG_VM86 #define X86_VM_MASK X86_EFLAGS_VM
@@ -32,8 +33,8 @@* CR3_ADDR_MASK is the mask used by read_cr3_pa(). */ #ifdef CONFIG_X86_64 -/* Mask off the address space ID bits. */ -#define CR3_ADDR_MASK 0x7FFFFFFFFFFFF000ull +/* Mask off the address space ID and SME encryption bits. */ +#define CR3_ADDR_MASK __sme_clr(0x7FFFFFFFFFFFF000ull)#define CR3_PCID_MASK 0xFFFull#else /*
arch/x86/include/asm/processor.h +5 -0
@@ -240,6 +240,11 @@ static inline unsigned long read_cr3_pa(void)return __read_cr3 () &CR3_ADDR_MASK ; } +static inline unsigned long native_read_cr3_pa (void ) +{ +return __native_read_cr3 () &CR3_ADDR_MASK ; +} +static inline void load_cr3 (pgd_t *pgdir) {write_cr3 (__sme_pa (pgdir));
PATCH v10 12/38 x86/mm: Extend early_memremap() support with additional attrs
In reply to Tom LendackyAdd early_memremap() support to be able to specify encrypted and decrypted mappings with and without write-protection. The use of write-protection is necessary when encrypting data "in place". The write-protect attribute is considered cacheable for loads, but not stores. This implies that the hardware will never give the core a dirty line with this memtype.
--- arch/x86/Kconfig | 4 ++++ arch/x86/include/asm/fixmap.h | 13 +++++++++++ arch/x86/include/asm/pgtable_types.h | 8 +++++++ arch/x86/mm/ioremap.c | 44 ++++++++++++++++++++++++++++++++++++ include/asm-generic/early_ioremap.h | 2 ++ mm/early_ioremap.c | 10 ++++++++ 6 files changed, 81 insertions(+)
arch/x86/Kconfig +4 -0
@@ -1440,6 +1440,10 @@ config AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT If set to N, then the encryption of system memory can be activated with the mem_encrypt=on command line option. +config ARCH_USE_MEMREMAP_PROT + def_bool y + depends on AMD_MEM_ENCRYPT + # Common NUMA Features config NUMA bool "Numa Memory Allocation and Scheduler Support"
arch/x86/include/asm/fixmap.h +13 -0
@@ -164,6 +164,19 @@ static inline void __set_fixmap(enum fixed_addresses idx,*/ #define FIXMAP_PAGE_NOCACHE PAGE_KERNEL_IO_NOCACHE +/* +* Early memremap routines used for in-place encryption. The mappings created +* by these routines are intended to be used as temporary mappings. +*/ +void __init *early_memremap_encrypted (resource_size_t phys_addr, +unsigned long size); +void __init *early_memremap_encrypted_wp (resource_size_t phys_addr, +unsigned long size); +void __init *early_memremap_decrypted (resource_size_t phys_addr, +unsigned long size); +void __init *early_memremap_decrypted_wp (resource_size_t phys_addr, +unsigned long size); +#include <asm-generic/fixmap.h> #define __late_set_fixmap (idx, phys, flags) __set_fixmap(idx, phys, flags)
arch/x86/include/asm/pgtable_types.h +8 -0
@@ -161,6 +161,7 @@ enum page_cache_mode {#define _PAGE_CACHE_MASK (_PAGE_PAT | _PAGE_PCD | _PAGE_PWT)#define _PAGE_NOCACHE (cachemode2protval(_PAGE_CACHE_MODE_UC)) +#define _PAGE_CACHE_WP (cachemode2protval(_PAGE_CACHE_MODE_WP))#define PAGE_NONE __pgprot(_PAGE_PROTNONE | _PAGE_ACCESSED)#define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | \
@@ -189,6 +190,7 @@ enum page_cache_mode {#define __PAGE_KERNEL_VVAR (__PAGE_KERNEL_RO | _PAGE_USER)#define __PAGE_KERNEL_LARGE (__PAGE_KERNEL | _PAGE_PSE)#define __PAGE_KERNEL_LARGE_EXEC (__PAGE_KERNEL_EXEC | _PAGE_PSE) +#define __PAGE_KERNEL_WP (__PAGE_KERNEL | _PAGE_CACHE_WP)#define __PAGE_KERNEL_IO (__PAGE_KERNEL)#define __PAGE_KERNEL_IO_NOCACHE (__PAGE_KERNEL_NOCACHE)
@@ -202,6 +204,12 @@ enum page_cache_mode {#define _KERNPG_TABLE (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | \ _PAGE_DIRTY | _PAGE_ENC) +#define __PAGE_KERNEL_ENC (__PAGE_KERNEL | _PAGE_ENC) +#define __PAGE_KERNEL_ENC_WP (__PAGE_KERNEL_WP | _PAGE_ENC) + +#define __PAGE_KERNEL_NOENC (__PAGE_KERNEL) +#define __PAGE_KERNEL_NOENC_WP (__PAGE_KERNEL_WP) +#define PAGE_KERNEL __pgprot(__PAGE_KERNEL | _PAGE_ENC)#define PAGE_KERNEL_RO __pgprot(__PAGE_KERNEL_RO | _PAGE_ENC)#define PAGE_KERNEL_EXEC __pgprot(__PAGE_KERNEL_EXEC | _PAGE_ENC)
arch/x86/mm/ioremap.c +44 -0
50 lines not on this page · raw message
include/asm-generic/early_ioremap.h +2 -0
@@ -13,6 +13,8 @@ extern void *early_memremap(resource_size_t phys_addr, unsigned long size);extern void *early_memremap_ro (resource_size_t phys_addr,unsigned long size); +extern void *early_memremap_prot (resource_size_t phys_addr, +unsigned long size,unsigned long prot_val);extern void early_iounmap (void __iomem *addr,unsigned long size);extern void early_memunmap (void *addr,unsigned long size);
mm/early_ioremap.c +10 -0
@@ -226,6 +226,16 @@ void __init early_iounmap(void __iomem *addr, unsigned long size) }#endif +#ifdef CONFIG_ARCH_USE_MEMREMAP_PROT +void __init * +early_memremap_prot (resource_size_t phys_addr,unsigned long size, +unsigned long prot_val) +{ +return (__force void *)__early_ioremap (phys_addr, size, +__pgprot (prot_val)); +} +#endif +#define MAX_MAP_CHUNK (NR_FIX_BTMAPS << PAGE_SHIFT)void __init copy_from_early_mem (void *dest,phys_addr_t src,unsigned long size)
Signature · 7 lines
1.9.1 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
tip-bot for Tom Lendacky
merge bot[tip:x86/mm] x86/mm: Extend early_memremap() support with additional attrs
x86/mm: Extend early_memremap() support with additional attrs
Commit-ID: f88a68facd9a15b94f8c195d9d2c0b30c76c595a Gitweb: http://git.kernel.org/tip/f88a68facd9a15b94f8c195d9d2c0b30c76c595a Author: Tom Lendacky <[email protected]> AuthorDate: Mon, 17 Jul 2017 16:10:09 -0500 Committer: Ingo Molnar <[email protected]> CommitDate: Tue, 18 Jul 2017 11:38:00 +0200
x86/mm: Extend early_memremap() support with additional attrs
Add early_memremap() support to be able to specify encrypted and decrypted mappings with and without write-protection. The use of write-protection is necessary when encrypting data "in place". The write-protect attribute is considered cacheable for loads, but not stores. This implies that the hardware will never give the core a dirty line with this memtype.
--- arch/x86/Kconfig | 4 ++++ arch/x86/include/asm/fixmap.h | 13 +++++++++++ arch/x86/include/asm/pgtable_types.h | 8 +++++++ arch/x86/mm/ioremap.c | 44 ++++++++++++++++++++++++++++++++++++ include/asm-generic/early_ioremap.h | 2 ++ mm/early_ioremap.c | 10 ++++++++ 6 files changed, 81 insertions(+)
arch/x86/Kconfig +4 -0
@@ -1440,6 +1440,10 @@ config AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT If set to N, then the encryption of system memory can be activated with the mem_encrypt=on command line option. +config ARCH_USE_MEMREMAP_PROT + def_bool y + depends on AMD_MEM_ENCRYPT + # Common NUMA Features config NUMA bool "Numa Memory Allocation and Scheduler Support"
arch/x86/include/asm/fixmap.h +13 -0
@@ -164,6 +164,19 @@ static inline void __set_fixmap(enum fixed_addresses idx,*/ #define FIXMAP_PAGE_NOCACHE PAGE_KERNEL_IO_NOCACHE +/* +* Early memremap routines used for in-place encryption. The mappings created +* by these routines are intended to be used as temporary mappings. +*/ +void __init *early_memremap_encrypted (resource_size_t phys_addr, +unsigned long size); +void __init *early_memremap_encrypted_wp (resource_size_t phys_addr, +unsigned long size); +void __init *early_memremap_decrypted (resource_size_t phys_addr, +unsigned long size); +void __init *early_memremap_decrypted_wp (resource_size_t phys_addr, +unsigned long size); +#include <asm-generic/fixmap.h> #define __late_set_fixmap (idx, phys, flags) __set_fixmap(idx, phys, flags)
arch/x86/include/asm/pgtable_types.h +8 -0
@@ -161,6 +161,7 @@ enum page_cache_mode {#define _PAGE_CACHE_MASK (_PAGE_PAT | _PAGE_PCD | _PAGE_PWT)#define _PAGE_NOCACHE (cachemode2protval(_PAGE_CACHE_MODE_UC)) +#define _PAGE_CACHE_WP (cachemode2protval(_PAGE_CACHE_MODE_WP))#define PAGE_NONE __pgprot(_PAGE_PROTNONE | _PAGE_ACCESSED)#define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | \
@@ -189,6 +190,7 @@ enum page_cache_mode {#define __PAGE_KERNEL_VVAR (__PAGE_KERNEL_RO | _PAGE_USER)#define __PAGE_KERNEL_LARGE (__PAGE_KERNEL | _PAGE_PSE)#define __PAGE_KERNEL_LARGE_EXEC (__PAGE_KERNEL_EXEC | _PAGE_PSE) +#define __PAGE_KERNEL_WP (__PAGE_KERNEL | _PAGE_CACHE_WP)#define __PAGE_KERNEL_IO (__PAGE_KERNEL)#define __PAGE_KERNEL_IO_NOCACHE (__PAGE_KERNEL_NOCACHE)
@@ -202,6 +204,12 @@ enum page_cache_mode {#define _KERNPG_TABLE (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | \ _PAGE_DIRTY | _PAGE_ENC) +#define __PAGE_KERNEL_ENC (__PAGE_KERNEL | _PAGE_ENC) +#define __PAGE_KERNEL_ENC_WP (__PAGE_KERNEL_WP | _PAGE_ENC) + +#define __PAGE_KERNEL_NOENC (__PAGE_KERNEL) +#define __PAGE_KERNEL_NOENC_WP (__PAGE_KERNEL_WP) +#define PAGE_KERNEL __pgprot(__PAGE_KERNEL | _PAGE_ENC)#define PAGE_KERNEL_RO __pgprot(__PAGE_KERNEL_RO | _PAGE_ENC)#define PAGE_KERNEL_EXEC __pgprot(__PAGE_KERNEL_EXEC | _PAGE_ENC)
arch/x86/mm/ioremap.c +44 -0
50 lines not on this page · raw message
include/asm-generic/early_ioremap.h +2 -0
@@ -13,6 +13,8 @@ extern void *early_memremap(resource_size_t phys_addr, unsigned long size);extern void *early_memremap_ro (resource_size_t phys_addr,unsigned long size); +extern void *early_memremap_prot (resource_size_t phys_addr, +unsigned long size,unsigned long prot_val);extern void early_iounmap (void __iomem *addr,unsigned long size);extern void early_memunmap (void *addr,unsigned long size);
mm/early_ioremap.c +10 -0
@@ -226,6 +226,16 @@ early_memremap_ro(resource_size_t phys_addr, unsigned long size) }#endif +#ifdef CONFIG_ARCH_USE_MEMREMAP_PROT +void __init * +early_memremap_prot (resource_size_t phys_addr,unsigned long size, +unsigned long prot_val) +{ +return (__force void *)__early_ioremap (phys_addr, size, +__pgprot (prot_val)); +} +#endif +#define MAX_MAP_CHUNK (NR_FIX_BTMAPS << PAGE_SHIFT)void __init copy_from_early_mem (void *dest,phys_addr_t src,unsigned long size)
PATCH v10 13/38 x86/mm: Add support for early encrypt/decrypt of memory
In reply to Tom LendackyAdd support to be able to either encrypt or decrypt data in place during the early stages of booting the kernel. This does not change the memory encryption attribute - it is used for ensuring that data present in either an encrypted or decrypted memory area is in the proper state (for example the initrd will have been loaded by the boot loader and will not be encrypted, but the memory that it resides in is marked as encrypted).
--- arch/x86/include/asm/mem_encrypt.h | 10 +++++ arch/x86/mm/mem_encrypt.c | 76 ++++++++++++++++++++++++++++++++++++++ 2 files changed, 86 insertions(+)
arch/x86/include/asm/mem_encrypt.h +10 -0
@@ -21,6 +21,11 @@extern unsigned long sme_me_mask; +void __init sme_early_encrypt (resource_size_t paddr, +unsigned long size); +void __init sme_early_decrypt (resource_size_t paddr, +unsigned long size); +void __init sme_early_init (void );void __init sme_encrypt_kernel (void );
@@ -30,6 +35,11 @@#define sme_me_mask 0UL +static inline void __init sme_early_encrypt (resource_size_t paddr, +unsigned long size) { } +static inline void __init sme_early_decrypt (resource_size_t paddr, +unsigned long size) { } +static inline void __init sme_early_init (void ) { }static inline void __init sme_encrypt_kernel (void ) { }
arch/x86/mm/mem_encrypt.c +76 -0
88 lines not on this page · raw message
Signature · 7 lines
1.9.1 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
tip-bot for Tom Lendacky
merge bot[tip:x86/mm] x86/mm: Add support for early encryption/decryption of memory
x86/mm: Add support for early encryption/decryption of memory
Commit-ID: 7f8b7e7f4ccbbd1fb8badddfabd28c955aea87b4 Gitweb: http://git.kernel.org/tip/7f8b7e7f4ccbbd1fb8badddfabd28c955aea87b4 Author: Tom Lendacky <[email protected]> AuthorDate: Mon, 17 Jul 2017 16:10:10 -0500 Committer: Ingo Molnar <[email protected]> CommitDate: Tue, 18 Jul 2017 11:38:01 +0200
x86/mm: Add support for early encryption/decryption of memory
Add support to be able to either encrypt or decrypt data in place during the early stages of booting the kernel. This does not change the memory encryption attribute - it is used for ensuring that data present in either an encrypted or decrypted memory area is in the proper state (for example the initrd will have been loaded by the boot loader and will not be encrypted, but the memory that it resides in is marked as encrypted).
--- arch/x86/include/asm/mem_encrypt.h | 10 +++++ arch/x86/mm/mem_encrypt.c | 76 ++++++++++++++++++++++++++++++++++++++ 2 files changed, 86 insertions(+)
arch/x86/include/asm/mem_encrypt.h +10 -0
@@ -21,6 +21,11 @@extern unsigned long sme_me_mask; +void __init sme_early_encrypt (resource_size_t paddr, +unsigned long size); +void __init sme_early_decrypt (resource_size_t paddr, +unsigned long size); +void __init sme_early_init (void );void __init sme_encrypt_kernel (void );
@@ -30,6 +35,11 @@ void __init sme_enable(void);#define sme_me_mask 0UL +static inline void __init sme_early_encrypt (resource_size_t paddr, +unsigned long size) { } +static inline void __init sme_early_decrypt (resource_size_t paddr, +unsigned long size) { } +static inline void __init sme_early_init (void ) { }static inline void __init sme_encrypt_kernel (void ) { }
arch/x86/mm/mem_encrypt.c +76 -0
88 lines not on this page · raw message
Re: [tip:x86/mm] x86/mm: Add support for early encryption/decryption of memory
Quoted 10 lines · tip-bot for Tom Lendacky
arch/x86/mm/mem_encrypt.c +10
-0+/* +* This routine does not change the underlying encryption setting of the +* page(s) that map this memory. It assumes that eventually the memory is +* meant to be accessed as either encrypted or decrypted but the contents +* are currently not in the desired state. +* +* This routine follows the steps outlined in the AMD64 Architecture +* Programmer's Manual Volume 2, Section 7.10.8 Encrypt-in-Place. +*/ +static void __init __sme_early_enc_dec(resource_size_t paddr,
arch/x86/mm/mem_encrypt.c line 50
Quoted 10 lines
arch/x86/mm/mem_encrypt.c +10
-0+ unsigned long size, bool enc) +{ + void *src, *dst; +size_t len; + +if (!sme_me_mask) +return ; + +local_flush_tlb (); +wbinvd ();
What is this TLB flush for? WBINVD is mentioned in "Volume 2, Section 7.10.8", but TLB flushes are not. Is it OK that this does not flush global pages?
Re: [tip:x86/mm] x86/mm: Add support for early encryption/decryption of memory
Quoted 17 lines · Dave Hansen
Quoted 16 lines · tip-bot for Tom Lendacky
arch/x86/mm/mem_encrypt.c +16
-0+/* +* This routine does not change the underlying encryption setting of the +* page(s) that map this memory. It assumes that eventually the memory is +* meant to be accessed as either encrypted or decrypted but the contents +* are currently not in the desired state. +* +* This routine follows the steps outlined in the AMD64 Architecture +* Programmer's Manual Volume 2, Section 7.10.8 Encrypt-in-Place. +*/ +static void __init __sme_early_enc_dec (resource_size_t paddr, +unsigned long size,bool enc) +{ +void *src, *dst; +size_t len; + +if (!sme_me_mask)
Quoted 8 lines
arch/x86/mm/mem_encrypt.c line 50
Quoted 4 lines
arch/x86/mm/mem_encrypt.c +4
-0+return ; + +local_flush_tlb (); +wbinvd ();What is this TLB flush for? WBINVD is mentioned in "Volume 2, Section 7.10.8", but TLB flushes are not. Is it OK that this does not flush global pages?
The local_flush_tlb() is not needed and can be removed. I had that in there from early development and testing and just missed removing it. I can queue up a patch to delete it and remove the ambiguity with this routine and the APM document.
Thanks,
Tom
Quoted 1 line
Re: [tip:x86/mm] x86/mm: Add support for early encryption/decryption of memory
Quoted 17 lines · Tom Lendacky
Quoted 16 lines
arch/x86/mm/mem_encrypt.c line 50
Quoted 12 lines
arch/x86/mm/mem_encrypt.c +11
-0+static void __init __sme_early_enc_dec (resource_size_t paddr, + unsigned long size, bool enc) +{ + void *src, *dst; + size_t len; + + if (!sme_me_mask) + return; + + local_flush_tlb(); + wbinvd();What is this TLB flush for? WBINVD is mentioned in "Volume 2, Section 7.10.8", but TLB flushes are not. Is it OK that this does not flush global pages?
Quoted 4 lines
The
local_flush_tlb()is not needed and can be removed. I had that in there from early development and testing and just missed removing it. I can queue up a patch to delete it and remove the ambiguity with this routine and the APM document.
Cool, I was just doing a little audit of those TLB flushes and this one stuck out at me. It would be great if it can be removed.
PATCH v10 14/38 x86/mm: Insure that boot memory areas are mapped properly
In reply to Tom LendackyThe boot data and command line data are present in memory in a decrypted state and are copied early in the boot process. The early page fault support will map these areas as encrypted, so before attempting to copy them, add decrypted mappings so the data is accessed properly when copied.
For the initrd, encrypt this data in place. Since the future mapping of the initrd area will be mapped as encrypted the data will be accessed properly.
--- arch/x86/include/asm/mem_encrypt.h | 6 ++++ arch/x86/include/asm/pgtable.h | 3 ++ arch/x86/kernel/head64.c | 30 +++++++++++++++--- arch/x86/kernel/setup.c | 9 ++++++ arch/x86/mm/kasan_init_64.c | 2 +- arch/x86/mm/mem_encrypt.c | 63 ++++++++++++++++++++++++++++++++++++++ 6 files changed, 108 insertions(+), 5 deletions(-)
arch/x86/include/asm/mem_encrypt.h +6 -0
@@ -26,6 +26,9 @@ void __init sme_early_encrypt(resource_size_t paddr,void __init sme_early_decrypt (resource_size_t paddr,unsigned long size); +void __init sme_map_bootdata (char *real_mode_data); +void __init sme_unmap_bootdata (char *real_mode_data); +void __init sme_early_init (void );void __init sme_encrypt_kernel (void );
@@ -40,6 +43,9 @@ static inline void __init sme_early_encrypt(resource_size_t paddr,static inline void __init sme_early_decrypt (resource_size_t paddr,unsigned long size) { } +static inline void __init sme_map_bootdata (char *real_mode_data) { } +static inline void __init sme_unmap_bootdata (char *real_mode_data) { } +static inline void __init sme_early_init (void ) { }static inline void __init sme_encrypt_kernel (void ) { }
arch/x86/include/asm/pgtable.h +3 -0
@@ -23,6 +23,9 @@#ifndef __ASSEMBLY__#include <asm/x86_init.h> +extern pgd_t early_top_pgt[PTRS_PER_PGD ]; +int __init __early_make_pgtable (unsigned long address,pmdval_t pmd); +void ptdump_walk_pgd_level (struct seq_file *m,pgd_t *pgd);void ptdump_walk_pgd_level_checkwx (void );
arch/x86/kernel/head64.c +26 -4
@@ -34,7 +34,6 @@/* * Manage page tables very early on. */ -extern pgd_t early_top_pgt[PTRS_PER_PGD ];extern pmd_t early_dynamic_pgts[EARLY_DYNAMIC_PAGE_TABLES ][PTRS_PER_PMD ];static unsigned int __initdata next_early_pgt;pmdval_t early_pmd_flags = __PAGE_KERNEL_LARGE & ~(_PAGE_GLOBAL | _PAGE_NX);
@@ -181,13 +180,13 @@ static void __init reset_early_page_tables(void) }/* Create a new PMD entry */ -int __init early_make_pgtable (unsigned long address) +int __init __early_make_pgtable (unsigned long address,pmdval_t pmd) {unsigned long physaddr = address - __PAGE_OFFSET;pgdval_t pgd, *pgd_p;p4dval_t p4d, *p4d_p;pudval_t pud, *pud_p; -pmdval_t pmd, *pmd_p; +pmdval_t *pmd_p;/* Invalid address or early pgt is done ? */ if (physaddr >=MAXMEM ||read_cr3_pa () !=__pa_nodebug (early_top_pgt))
@@ -246,12 +245,21 @@ int __init early_make_pgtable(unsigned long address)memset (pmd_p,0 ,sizeof (*pmd_p) *PTRS_PER_PMD ); *pud_p = (pudval_t )pmd_p - __START_KERNEL_map + phys_base + _KERNPG_TABLE; } - pmd = (physaddr &PMD_MASK ) + early_pmd_flags; pmd_p[pmd_index (address)] = pmd;return 0 ; } +int __init early_make_pgtable (unsigned long address) +{ +unsigned long physaddr = address - __PAGE_OFFSET; +pmdval_t pmd; + + pmd = (physaddr &PMD_MASK ) + early_pmd_flags; + +return __early_make_pgtable (address, pmd); +} +/* Don't add a printk in there. printk relies on the PDA which is not initialized yet. */ static void __init clear_bss (void )
@@ -274,6 +282,12 @@ static void __init copy_bootdata(char *real_mode_data)char * command_line;unsigned long cmd_line_ptr; +/* +* If SME is active, this will create decrypted mappings of the +* boot data in advance of the copy operations. +*/ +sme_map_bootdata (real_mode_data); +memcpy (&boot_params, real_mode_data,sizeof boot_params);sanitize_boot_params (&boot_params); cmd_line_ptr =get_cmd_line_ptr ();
@@ -281,6 +295,14 @@ static void __init copy_bootdata(char *real_mode_data) command_line =__va (cmd_line_ptr);memcpy (boot_command_line, command_line,COMMAND_LINE_SIZE ); } + +/* +* The old boot data is no longer needed and won't be reserved, +* freeing up that memory for use by the system. If SME is active, +* we need to remove the mappings that were created so that the +* memory doesn't remain mapped as decrypted. +*/ +sme_unmap_bootdata (real_mode_data); } asmlinkage __visible void __init x86_64_start_kernel(char * real_mode_data)
arch/x86/kernel/setup.c +9 -0
@@ -69,6 +69,7 @@#include <linux/crash_dump.h> #include <linux/tboot.h> #include <linux/jiffies.h> +#include <linux/mem_encrypt.h> #include <linux/usb/xhci-dbgp.h> #include <video/edid.h>
@@ -374,6 +375,14 @@ static void __init reserve_initrd(void) !ramdisk_image || !ramdisk_size)return ;/* No initrd provided by bootloader */ +/* +* If SME is active, this memory will be marked encrypted by the +* kernel when it is accessed (including relocation). However, the +* ramdisk image was loaded decrypted by the bootloader, so make +* sure that it is encrypted before accessing it. +*/ +sme_early_encrypt (ramdisk_image, ramdisk_end - ramdisk_image); + initrd_start =0 ; mapped_size =memblock_mem_size (max_pfn_mapped);
arch/x86/mm/kasan_init_64.c +1 -1
@@ -11,8 +11,8 @@#include <asm/e820/types.h> #include <asm/tlbflush.h> #include <asm/sections.h> +#include <asm/pgtable.h> -extern pgd_t early_top_pgt[PTRS_PER_PGD ];extern struct range pfn_mapped[E820_MAX_ENTRIES ];static int __init map_range (struct range *range)
arch/x86/mm/mem_encrypt.c +63 -0
75 lines not on this page · raw message
Signature · 7 lines
1.9.1 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
tip-bot for Tom Lendacky
merge bot[tip:x86/mm] x86/mm: Insure that boot memory areas are mapped properly
x86/mm: Insure that boot memory areas are mapped properly
Commit-ID: b9d05200bc12444c7778a49c9694d8382ed06aa8 Gitweb: http://git.kernel.org/tip/b9d05200bc12444c7778a49c9694d8382ed06aa8 Author: Tom Lendacky <[email protected]> AuthorDate: Mon, 17 Jul 2017 16:10:11 -0500 Committer: Ingo Molnar <[email protected]> CommitDate: Tue, 18 Jul 2017 11:38:01 +0200
x86/mm: Insure that boot memory areas are mapped properly
The boot data and command line data are present in memory in a decrypted state and are copied early in the boot process. The early page fault support will map these areas as encrypted, so before attempting to copy them, add decrypted mappings so the data is accessed properly when copied.
For the initrd, encrypt this data in place. Since the future mapping of the initrd area will be mapped as encrypted the data will be accessed properly.
--- arch/x86/include/asm/mem_encrypt.h | 6 ++++ arch/x86/include/asm/pgtable.h | 3 ++ arch/x86/kernel/head64.c | 30 +++++++++++++++--- arch/x86/kernel/setup.c | 9 ++++++ arch/x86/mm/kasan_init_64.c | 2 +- arch/x86/mm/mem_encrypt.c | 63 ++++++++++++++++++++++++++++++++++++++ 6 files changed, 108 insertions(+), 5 deletions(-)
arch/x86/include/asm/mem_encrypt.h +6 -0
@@ -26,6 +26,9 @@ void __init sme_early_encrypt(resource_size_t paddr,void __init sme_early_decrypt (resource_size_t paddr,unsigned long size); +void __init sme_map_bootdata (char *real_mode_data); +void __init sme_unmap_bootdata (char *real_mode_data); +void __init sme_early_init (void );void __init sme_encrypt_kernel (void );
@@ -40,6 +43,9 @@ static inline void __init sme_early_encrypt(resource_size_t paddr,static inline void __init sme_early_decrypt (resource_size_t paddr,unsigned long size) { } +static inline void __init sme_map_bootdata (char *real_mode_data) { } +static inline void __init sme_unmap_bootdata (char *real_mode_data) { } +static inline void __init sme_early_init (void ) { }static inline void __init sme_encrypt_kernel (void ) { }
arch/x86/include/asm/pgtable.h +3 -0
@@ -23,6 +23,9 @@#ifndef __ASSEMBLY__#include <asm/x86_init.h> +extern pgd_t early_top_pgt[PTRS_PER_PGD ]; +int __init __early_make_pgtable (unsigned long address,pmdval_t pmd); +void ptdump_walk_pgd_level (struct seq_file *m,pgd_t *pgd);void ptdump_walk_pgd_level_checkwx (void );
arch/x86/kernel/head64.c +26 -4
@@ -34,7 +34,6 @@/* * Manage page tables very early on. */ -extern pgd_t early_top_pgt[PTRS_PER_PGD ];extern pmd_t early_dynamic_pgts[EARLY_DYNAMIC_PAGE_TABLES ][PTRS_PER_PMD ];static unsigned int __initdata next_early_pgt;pmdval_t early_pmd_flags = __PAGE_KERNEL_LARGE & ~(_PAGE_GLOBAL | _PAGE_NX);
@@ -181,13 +180,13 @@ static void __init reset_early_page_tables(void) }/* Create a new PMD entry */ -int __init early_make_pgtable (unsigned long address) +int __init __early_make_pgtable (unsigned long address,pmdval_t pmd) {unsigned long physaddr = address - __PAGE_OFFSET;pgdval_t pgd, *pgd_p;p4dval_t p4d, *p4d_p;pudval_t pud, *pud_p; -pmdval_t pmd, *pmd_p; +pmdval_t *pmd_p;/* Invalid address or early pgt is done ? */ if (physaddr >=MAXMEM ||read_cr3_pa () !=__pa_nodebug (early_top_pgt))
@@ -246,12 +245,21 @@ again:memset (pmd_p,0 ,sizeof (*pmd_p) *PTRS_PER_PMD ); *pud_p = (pudval_t )pmd_p - __START_KERNEL_map + phys_base + _KERNPG_TABLE; } - pmd = (physaddr &PMD_MASK ) + early_pmd_flags; pmd_p[pmd_index (address)] = pmd;return 0 ; } +int __init early_make_pgtable (unsigned long address) +{ +unsigned long physaddr = address - __PAGE_OFFSET; +pmdval_t pmd; + + pmd = (physaddr &PMD_MASK ) + early_pmd_flags; + +return __early_make_pgtable (address, pmd); +} +/* Don't add a printk in there. printk relies on the PDA which is not initialized yet. */ static void __init clear_bss (void )
@@ -274,6 +282,12 @@ static void __init copy_bootdata(char *real_mode_data)char * command_line;unsigned long cmd_line_ptr; +/* +* If SME is active, this will create decrypted mappings of the +* boot data in advance of the copy operations. +*/ +sme_map_bootdata (real_mode_data); +memcpy (&boot_params, real_mode_data,sizeof boot_params);sanitize_boot_params (&boot_params); cmd_line_ptr =get_cmd_line_ptr ();
@@ -281,6 +295,14 @@ static void __init copy_bootdata(char *real_mode_data) command_line =__va (cmd_line_ptr);memcpy (boot_command_line, command_line,COMMAND_LINE_SIZE ); } + +/* +* The old boot data is no longer needed and won't be reserved, +* freeing up that memory for use by the system. If SME is active, +* we need to remove the mappings that were created so that the +* memory doesn't remain mapped as decrypted. +*/ +sme_unmap_bootdata (real_mode_data); } asmlinkage __visible void __init x86_64_start_kernel(char * real_mode_data)
arch/x86/kernel/setup.c +9 -0
@@ -69,6 +69,7 @@#include <linux/crash_dump.h> #include <linux/tboot.h> #include <linux/jiffies.h> +#include <linux/mem_encrypt.h> #include <linux/usb/xhci-dbgp.h> #include <video/edid.h>
@@ -374,6 +375,14 @@ static void __init reserve_initrd(void) !ramdisk_image || !ramdisk_size)return ;/* No initrd provided by bootloader */ +/* +* If SME is active, this memory will be marked encrypted by the +* kernel when it is accessed (including relocation). However, the +* ramdisk image was loaded decrypted by the bootloader, so make +* sure that it is encrypted before accessing it. +*/ +sme_early_encrypt (ramdisk_image, ramdisk_end - ramdisk_image); + initrd_start =0 ; mapped_size =memblock_mem_size (max_pfn_mapped);
arch/x86/mm/kasan_init_64.c +1 -1
@@ -11,8 +11,8 @@#include <asm/e820/types.h> #include <asm/tlbflush.h> #include <asm/sections.h> +#include <asm/pgtable.h> -extern pgd_t early_top_pgt[PTRS_PER_PGD ];extern struct range pfn_mapped[E820_MAX_ENTRIES ];static int __init map_range (struct range *range)
arch/x86/mm/mem_encrypt.c +63 -0
75 lines not on this page · raw message
PATCH v10 15/38 x86/boot/e820: Add support to determine the E820 type of an address
In reply to Tom LendackyAdd a function that will return the E820 type associated with an address range.
--- arch/x86/include/asm/e820/api.h | 2 ++ arch/x86/kernel/e820.c | 26 +++++++++++++++++++++++--- 2 files changed, 25 insertions(+), 3 deletions(-)
arch/x86/include/asm/e820/api.h +2 -0
@@ -39,6 +39,8 @@extern void e820__reallocate_tables (void );extern void e820__register_nosave_regions (unsigned long limit_pfn); +extern int e820__get_entry_type (u64 start,u64 end); +/* * Returns true iff the specified range [start,end) is completely contained inside * the ISA region.
arch/x86/kernel/e820.c +23 -3
@@ -96,7 +96,8 @@ bool e820__mapped_any(u64 start, u64 end, enum e820_type type)* Note: this function only works correctly once the E820 table is sorted and * not-overlapping (at least for the range specified), which is the case normally. */ -bool __init e820__mapped_all (u64 start,u64 end,enum e820_type type) +static struct e820_entry *__e820__mapped_all (u64 start,u64 end, +enum e820_type type) {int i;
@@ -122,9 +123,28 @@ bool __init e820__mapped_all(u64 start, u64 end, enum e820_type type)* coverage of the desired range exists: */ if (start >= end) -return 1 ; +return entry; } -return 0 ; + +return NULL ; +} + +/* +* This function checks if the entire range <start,end> is mapped with type. +*/ +bool __init e820__mapped_all (u64 start,u64 end,enum e820_type type) +{ +return __e820__mapped_all (start, end, type); +} + +/* +* This function returns the type associated with the range <start,end>. +*/ +int e820__get_entry_type (u64 start,u64 end) +{ +struct e820_entry *entry =__e820__mapped_all (start, end,0 ); + +return entry ? entry->type : -EINVAL ; }/*
Signature · 7 lines
1.9.1 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
tip-bot for Tom Lendacky
merge bot[tip:x86/mm] x86/boot/e820: Add support to determine the E820 type of an address
x86/boot/e820: Add support to determine the E820 type of an address
Commit-ID: d68baa3fa6e4d703fd0c7954ee5c739789e7242f Gitweb: http://git.kernel.org/tip/d68baa3fa6e4d703fd0c7954ee5c739789e7242f Author: Tom Lendacky <[email protected]> AuthorDate: Mon, 17 Jul 2017 16:10:12 -0500 Committer: Ingo Molnar <[email protected]> CommitDate: Tue, 18 Jul 2017 11:38:01 +0200
x86/boot/e820: Add support to determine the E820 type of an address
Add a function that will return the E820 type associated with an address range.
--- arch/x86/include/asm/e820/api.h | 2 ++ arch/x86/kernel/e820.c | 26 +++++++++++++++++++++++--- 2 files changed, 25 insertions(+), 3 deletions(-)
arch/x86/include/asm/e820/api.h +2 -0
@@ -39,6 +39,8 @@ extern void e820__setup_pci_gap(void);extern void e820__reallocate_tables (void );extern void e820__register_nosave_regions (unsigned long limit_pfn); +extern int e820__get_entry_type (u64 start,u64 end); +/* * Returns true iff the specified range [start,end) is completely contained inside * the ISA region.
arch/x86/kernel/e820.c +23 -3
@@ -96,7 +96,8 @@ EXPORT_SYMBOL_GPL(e820__mapped_any);* Note: this function only works correctly once the E820 table is sorted and * not-overlapping (at least for the range specified), which is the case normally. */ -bool __init e820__mapped_all (u64 start,u64 end,enum e820_type type) +static struct e820_entry *__e820__mapped_all (u64 start,u64 end, +enum e820_type type) {int i;
@@ -122,9 +123,28 @@ bool __init e820__mapped_all(u64 start, u64 end, enum e820_type type)* coverage of the desired range exists: */ if (start >= end) -return 1 ; +return entry; } -return 0 ; + +return NULL ; +} + +/* +* This function checks if the entire range <start,end> is mapped with type. +*/ +bool __init e820__mapped_all (u64 start,u64 end,enum e820_type type) +{ +return __e820__mapped_all (start, end, type); +} + +/* +* This function returns the type associated with the range <start,end>. +*/ +int e820__get_entry_type (u64 start,u64 end) +{ +struct e820_entry *entry =__e820__mapped_all (start, end,0 ); + +return entry ? entry->type : -EINVAL ; }/*
PATCH v10 16/38 efi: Add an EFI table address match function
In reply to Tom LendackyAdd a function that will determine if a supplied physical address matches the address of an EFI table.
--- drivers/firmware/efi/efi.c | 33 +++++++++++++++++++++++++++++++++ include/linux/efi.h | 7 +++++++ 2 files changed, 40 insertions(+)
drivers/firmware/efi/efi.c +33 -0
@@ -55,6 +55,25 @@ struct efi __read_mostly efi = { };EXPORT_SYMBOL (efi); +static unsigned long *efi_tables[] = { + &efi.mps, + &efi.acpi, + &efi.acpi20, + &efi.smbios, + &efi.smbios3, + &efi.sal_systab, + &efi.boot_info, + &efi.hcdp, + &efi.uga, + &efi.uv_systab, + &efi.fw_vendor, + &efi.runtime, + &efi.config_table, + &efi.esrt, + &efi.properties_table, + &efi.mem_attr_table, +}; +static bool disable_runtime;static int __init setup_noefi (char *arg) {
@@ -855,6 +874,20 @@ int efi_status_to_err(efi_status_t status)return err; } +bool efi_is_table_address (unsigned long phys_addr) +{ +unsigned int i; + +if (phys_addr ==EFI_INVALID_TABLE_ADDR ) +return false; + +for (i =0 ; i <ARRAY_SIZE (efi_tables); i++) +if (*(efi_tables[i]) == phys_addr) +return true; + +return false; +} +#ifdef CONFIG_KEXEC static int update_efi_random_seed (struct notifier_block *nb,unsigned long code,void *unused)
include/linux/efi.h +7 -0
@@ -1091,6 +1091,8 @@ static inline bool efi_enabled(int feature) return test_bit(feature, &efi.flags) != 0; }extern void efi_reboot (enum reboot_mode reboot_mode,const char *__unused); + +extern bool efi_is_table_address (unsigned long phys_addr);#else static inline bool efi_enabled (int feature) {
@@ -1104,6 +1106,11 @@ static inline bool efi_enabled(int feature) {return false; } + +static inline bool efi_is_table_address (unsigned long phys_addr) +{ +return false; +}#endif extern int efi_status_to_err (efi_status_t status);
Signature · 7 lines
1.9.1 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
tip-bot for Tom Lendacky
merge bot[tip:x86/mm] efi: Add an EFI table address match function
efi: Add an EFI table address match function
Commit-ID: a19d66c56af1c52b8b463bf94d21116ae8c1aa5a Gitweb: http://git.kernel.org/tip/a19d66c56af1c52b8b463bf94d21116ae8c1aa5a Author: Tom Lendacky <[email protected]> AuthorDate: Mon, 17 Jul 2017 16:10:13 -0500 Committer: Ingo Molnar <[email protected]> CommitDate: Tue, 18 Jul 2017 11:38:01 +0200
efi: Add an EFI table address match function
Add a function that will determine if a supplied physical address matches the address of an EFI table.
--- drivers/firmware/efi/efi.c | 33 +++++++++++++++++++++++++++++++++ include/linux/efi.h | 7 +++++++ 2 files changed, 40 insertions(+)
drivers/firmware/efi/efi.c +33 -0
@@ -55,6 +55,25 @@ struct efi __read_mostly efi = { };EXPORT_SYMBOL (efi); +static unsigned long *efi_tables[] = { + &efi.mps, + &efi.acpi, + &efi.acpi20, + &efi.smbios, + &efi.smbios3, + &efi.sal_systab, + &efi.boot_info, + &efi.hcdp, + &efi.uga, + &efi.uv_systab, + &efi.fw_vendor, + &efi.runtime, + &efi.config_table, + &efi.esrt, + &efi.properties_table, + &efi.mem_attr_table, +}; +static bool disable_runtime;static int __init setup_noefi (char *arg) {
@@ -855,6 +874,20 @@ int efi_status_to_err(efi_status_t status)return err; } +bool efi_is_table_address (unsigned long phys_addr) +{ +unsigned int i; + +if (phys_addr ==EFI_INVALID_TABLE_ADDR ) +return false; + +for (i =0 ; i <ARRAY_SIZE (efi_tables); i++) +if (*(efi_tables[i]) == phys_addr) +return true; + +return false; +} +#ifdef CONFIG_KEXEC static int update_efi_random_seed (struct notifier_block *nb,unsigned long code,void *unused)
include/linux/efi.h +7 -0
@@ -1091,6 +1091,8 @@ static inline bool efi_enabled(int feature) return test_bit(feature, &efi.flags) != 0; }extern void efi_reboot (enum reboot_mode reboot_mode,const char *__unused); + +extern bool efi_is_table_address (unsigned long phys_addr);#else static inline bool efi_enabled (int feature) {
@@ -1104,6 +1106,11 @@ efi_capsule_pending(int *reset_type) {return false; } + +static inline bool efi_is_table_address (unsigned long phys_addr) +{ +return false; +}#endif extern int efi_status_to_err (efi_status_t status);
PATCH v10 17/38 efi: Update efi_mem_type() to return an error rather than 0
In reply to Tom LendackyThe efi_mem_type() function currently returns a 0, which maps to EFI_RESERVED_TYPE, if the function is unable to find a memmap entry for the supplied physical address. Returning EFI_RESERVED_TYPE implies that a memmap entry exists, when it doesn't. Instead of returning 0, change the function to return a negative error value when no memmap entry is found.
--- arch/ia64/kernel/efi.c | 4 ++-- arch/x86/platform/efi/efi.c | 6 +++--- include/linux/efi.h | 2 +- 3 files changed, 6 insertions(+), 6 deletions(-)
arch/ia64/kernel/efi.c +2 -2
@@ -757,14 +757,14 @@ static void __init handle_palo(unsigned long phys_addr)return 0 ; } -u32 +int efi_mem_type (unsigned long phys_addr) {efi_memory_desc_t *md =efi_memory_descriptor (phys_addr);if (md)return md->type; -return 0 ; +return -EINVAL ; } u64
arch/x86/platform/efi/efi.c +3 -3
@@ -1035,12 +1035,12 @@ void __init efi_enter_virtual_mode(void)/* * Convenience functions to obtain memory types and attributes */ -u32 efi_mem_type (unsigned long phys_addr) +int efi_mem_type (unsigned long phys_addr) {efi_memory_desc_t *md;if (!efi_enabled (EFI_MEMMAP )) -return 0 ; +return -ENOTSUPP ;for_each_efi_memory_desc (md) { if ((md->phys_addr <= phys_addr) &&
@@ -1048,7 +1048,7 @@ u32 efi_mem_type(unsigned long phys_addr) (md->num_pages << EFI_PAGE_SHIFT))))return md->type; } -return 0 ; +return -EINVAL ; }static int __init arch_parse_efi_cmdline (char *str)
include/linux/efi.h +1 -1
@@ -985,7 +985,7 @@ static inline void efi_esrt_init(void) { }extern int efi_config_parse_tables (void *config_tables,int count,int sz,efi_config_table_type_t *arch_tables);extern u64 efi_get_iobase (void ); -extern u32 efi_mem_type (unsigned long phys_addr); +extern int efi_mem_type (unsigned long phys_addr);extern u64 efi_mem_attributes (unsigned long phys_addr);extern u64 efi_mem_attribute (unsigned long phys_addr,unsigned long size);extern int __init efi_uart_console_only (void );
Signature · 7 lines
1.9.1 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
tip-bot for Tom Lendacky
merge bot[tip:x86/mm] efi: Update efi_mem_type() to return an error rather than 0
efi: Update efi_mem_type() to return an error rather than 0
Commit-ID: f99afd08a45fbbd9ce35a7624ffd1d850a1906c0 Gitweb: http://git.kernel.org/tip/f99afd08a45fbbd9ce35a7624ffd1d850a1906c0 Author: Tom Lendacky <[email protected]> AuthorDate: Mon, 17 Jul 2017 16:10:14 -0500 Committer: Ingo Molnar <[email protected]> CommitDate: Tue, 18 Jul 2017 11:38:01 +0200
efi: Update efi_mem_type() to return an error rather than 0
The efi_mem_type() function currently returns a 0, which maps to EFI_RESERVED_TYPE, if the function is unable to find a memmap entry for the supplied physical address. Returning EFI_RESERVED_TYPE implies that a memmap entry exists, when it doesn't. Instead of returning 0, change the function to return a negative error value when no memmap entry is found.
--- arch/ia64/kernel/efi.c | 4 ++-- arch/x86/platform/efi/efi.c | 6 +++--- include/linux/efi.h | 2 +- 3 files changed, 6 insertions(+), 6 deletions(-)
arch/ia64/kernel/efi.c +2 -2
@@ -757,14 +757,14 @@ efi_memmap_intersects (unsigned long phys_addr, unsigned long size)return 0 ; } -u32 +int efi_mem_type (unsigned long phys_addr) {efi_memory_desc_t *md =efi_memory_descriptor (phys_addr);if (md)return md->type; -return 0 ; +return -EINVAL ; } u64
arch/x86/platform/efi/efi.c +3 -3
@@ -1035,12 +1035,12 @@ void __init efi_enter_virtual_mode(void)/* * Convenience functions to obtain memory types and attributes */ -u32 efi_mem_type (unsigned long phys_addr) +int efi_mem_type (unsigned long phys_addr) {efi_memory_desc_t *md;if (!efi_enabled (EFI_MEMMAP )) -return 0 ; +return -ENOTSUPP ;for_each_efi_memory_desc (md) { if ((md->phys_addr <= phys_addr) &&
@@ -1048,7 +1048,7 @@ u32 efi_mem_type(unsigned long phys_addr) (md->num_pages << EFI_PAGE_SHIFT))))return md->type; } -return 0 ; +return -EINVAL ; }static int __init arch_parse_efi_cmdline (char *str)
include/linux/efi.h +1 -1
@@ -985,7 +985,7 @@ static inline void efi_esrt_init(void) { }extern int efi_config_parse_tables (void *config_tables,int count,int sz,efi_config_table_type_t *arch_tables);extern u64 efi_get_iobase (void ); -extern u32 efi_mem_type (unsigned long phys_addr); +extern int efi_mem_type (unsigned long phys_addr);extern u64 efi_mem_attributes (unsigned long phys_addr);extern u64 efi_mem_attribute (unsigned long phys_addr,unsigned long size);extern int __init efi_uart_console_only (void );
PATCH v10 18/38 x86/efi: Update EFI pagetable creation to work with SME
In reply to Tom LendackyWhen SME is active, pagetable entries created for EFI need to have the encryption mask set as necessary.
When the new pagetable pages are allocated they are mapped encrypted. So, update the efi_pgt value that will be used in cr3 to include the encryption mask so that the PGD table can be read successfully. The pagetable mapping as well as the kernel are also added to the pagetable mapping as encrypted. All other EFI mappings are mapped decrypted (tables, etc.).
--- arch/x86/platform/efi/efi_64.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-)
arch/x86/platform/efi/efi_64.c +11 -4
@@ -327,7 +327,7 @@ void efi_sync_low_kernel_mappings(void)int __init efi_setup_page_tables (unsigned long pa_memmap,unsigned num_pages) { -unsigned long pfn, text; +unsigned long pfn, text, pf;struct page *page;unsigned npages;pgd_t *pgd;
@@ -335,7 +335,12 @@ int __init efi_setup_page_tables(unsigned long pa_memmap, unsigned num_pages)if (efi_enabled (EFI_OLD_MEMMAP ))return 0 ; - efi_scratch.efi_pgt = (pgd_t *)__pa (efi_pgd); +/* +* Since the PGD is encrypted, set the encryption mask so that when +* this value is loaded into cr3 the PGD will be decrypted during +* the pagetable walk. +*/ + efi_scratch.efi_pgt = (pgd_t *)__sme_pa (efi_pgd); pgd = efi_pgd;/*
@@ -345,7 +350,8 @@ int __init efi_setup_page_tables(unsigned long pa_memmap, unsigned num_pages)* phys_efi_set_virtual_address_map(). */ pfn = pa_memmap >>PAGE_SHIFT ; -if (kernel_map_pages_in_pgd (pgd, pfn, pa_memmap, num_pages, _PAGE_NX | _PAGE_RW)) { + pf = _PAGE_NX | _PAGE_RW | _PAGE_ENC; +if (kernel_map_pages_in_pgd (pgd, pfn, pa_memmap, num_pages, pf)) {pr_err ("Error ident-mapping new memmap (0x%lx)!\n" , pa_memmap);return 1 ; }
@@ -388,7 +394,8 @@ int __init efi_setup_page_tables(unsigned long pa_memmap, unsigned num_pages) text =__pa (_text); pfn = text >>PAGE_SHIFT ; -if (kernel_map_pages_in_pgd (pgd, pfn, text, npages, _PAGE_RW)) { + pf = _PAGE_RW | _PAGE_ENC; +if (kernel_map_pages_in_pgd (pgd, pfn, text, npages, pf)) {pr_err ("Failed to map kernel text 1:1\n" );return 1 ; }
Signature · 7 lines
1.9.1 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
tip-bot for Tom Lendacky
merge bot[tip:x86/mm] x86/efi: Update EFI pagetable creation to work with SME
x86/efi: Update EFI pagetable creation to work with SME
Commit-ID: 38eecccdf488e38ee93690cfe9ec1914b73f512f Gitweb: http://git.kernel.org/tip/38eecccdf488e38ee93690cfe9ec1914b73f512f Author: Tom Lendacky <[email protected]> AuthorDate: Mon, 17 Jul 2017 16:10:15 -0500 Committer: Ingo Molnar <[email protected]> CommitDate: Tue, 18 Jul 2017 11:38:02 +0200
x86/efi: Update EFI pagetable creation to work with SME
When SME is active, pagetable entries created for EFI need to have the encryption mask set as necessary.
When the new pagetable pages are allocated they are mapped encrypted. So, update the efi_pgt value that will be used in CR3 to include the encryption mask so that the PGD table can be read successfully. The pagetable mapping as well as the kernel are also added to the pagetable mapping as encrypted. All other EFI mappings are mapped decrypted (tables, etc.).
--- arch/x86/platform/efi/efi_64.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-)
arch/x86/platform/efi/efi_64.c +11 -4
@@ -327,7 +327,7 @@ virt_to_phys_or_null_size(void *va, unsigned long size)int __init efi_setup_page_tables (unsigned long pa_memmap,unsigned num_pages) { -unsigned long pfn, text; +unsigned long pfn, text, pf;struct page *page;unsigned npages;pgd_t *pgd;
@@ -335,7 +335,12 @@ int __init efi_setup_page_tables(unsigned long pa_memmap, unsigned num_pages)if (efi_enabled (EFI_OLD_MEMMAP ))return 0 ; - efi_scratch.efi_pgt = (pgd_t *)__pa (efi_pgd); +/* +* Since the PGD is encrypted, set the encryption mask so that when +* this value is loaded into cr3 the PGD will be decrypted during +* the pagetable walk. +*/ + efi_scratch.efi_pgt = (pgd_t *)__sme_pa (efi_pgd); pgd = efi_pgd;/*
@@ -345,7 +350,8 @@ int __init efi_setup_page_tables(unsigned long pa_memmap, unsigned num_pages)* phys_efi_set_virtual_address_map(). */ pfn = pa_memmap >>PAGE_SHIFT ; -if (kernel_map_pages_in_pgd (pgd, pfn, pa_memmap, num_pages, _PAGE_NX | _PAGE_RW)) { + pf = _PAGE_NX | _PAGE_RW | _PAGE_ENC; +if (kernel_map_pages_in_pgd (pgd, pfn, pa_memmap, num_pages, pf)) {pr_err ("Error ident-mapping new memmap (0x%lx)!\n" , pa_memmap);return 1 ; }
@@ -388,7 +394,8 @@ int __init efi_setup_page_tables(unsigned long pa_memmap, unsigned num_pages) text =__pa (_text); pfn = text >>PAGE_SHIFT ; -if (kernel_map_pages_in_pgd (pgd, pfn, text, npages, _PAGE_RW)) { + pf = _PAGE_RW | _PAGE_ENC; +if (kernel_map_pages_in_pgd (pgd, pfn, text, npages, pf)) {pr_err ("Failed to map kernel text 1:1\n" );return 1 ; }
PATCH v10 19/38 x86/mm: Add support to access boot related data in the clear
In reply to Tom LendackyBoot data (such as EFI related data) is not encrypted when the system is booted because UEFI/BIOS does not run with SME active. In order to access this data properly it needs to be mapped decrypted.
Update early_memremap() to provide an arch specific routine to modify the pagetable protection attributes before they are applied to the new mapping. This is used to remove the encryption mask for boot related data.
Update memremap() to provide an arch specific routine to determine if RAM remapping is allowed. RAM remapping will cause an encrypted mapping to be generated. By preventing RAM remapping, ioremap_cache() will be used instead, which will provide a decrypted mapping of the boot related data.
--- arch/x86/include/asm/io.h | 5 ++ arch/x86/mm/ioremap.c | 180 ++++++++++++++++++++++++++++++++++++++++++++++ include/linux/io.h | 2 + kernel/memremap.c | 20 ++++-- mm/early_ioremap.c | 18 ++++- 5 files changed, 218 insertions(+), 7 deletions(-)
arch/x86/include/asm/io.h +5 -0
@@ -381,4 +381,9 @@ extern int __must_check arch_phys_wc_add(unsigned long base,#define arch_io_reserve_memtype_wc arch_io_reserve_memtype_wc#endif +extern bool arch_memremap_can_ram_remap (resource_size_t offset, +unsigned long size, +unsigned long flags); +#define arch_memremap_can_ram_remap arch_memremap_can_ram_remap +#endif /* _ASM_X86_IO_H */
arch/x86/mm/ioremap.c +180 -0
198 lines not on this page · raw message
include/linux/io.h +2 -0
@@ -157,6 +157,8 @@ enum {MEMREMAP_WB =1 <<0 ,MEMREMAP_WT =1 <<1 ,MEMREMAP_WC =1 <<2 , +MEMREMAP_ENC =1 <<3 , + MEMREMAP_DEC = 1 << 4, };void *memremap (resource_size_t offset,size_t size,unsigned long flags);
kernel/memremap.c +16 -4
@@ -34,13 +34,24 @@ static void *arch_memremap_wb(resource_size_t offset, unsigned long size) }#endif -static void *try_ram_remap (resource_size_t offset,size_t size) +#ifndef arch_memremap_can_ram_remap +static bool arch_memremap_can_ram_remap (resource_size_t offset,size_t size, +unsigned long flags) +{ +return true; +} +#endif + +static void *try_ram_remap (resource_size_t offset,size_t size, +unsigned long flags) {unsigned long pfn =PHYS_PFN (offset);/* In the simple case just return the existing linear address */ -if (pfn_valid (pfn) && !PageHighMem (pfn_to_page (pfn))) +if (pfn_valid (pfn) && !PageHighMem (pfn_to_page (pfn)) && +arch_memremap_can_ram_remap (offset, size, flags))return __va (offset); +return NULL ;/* fallback to arch_memremap_wb */ }
@@ -48,7 +59,8 @@ static void *try_ram_remap(resource_size_t offset, size_t size)* memremap() - remap an iomem_resource as cacheable memory * @offset: iomem resource start address * @size: size of remap -* @flags: any of MEMREMAP_WB, MEMREMAP_WT and MEMREMAP_WC +* @flags: any of MEMREMAP_WB, MEMREMAP_WT, MEMREMAP_WC, +* MEMREMAP_ENC, MEMREMAP_DEC * * memremap() is "ioremap" for cases where it is known that the resource * being mapped does not have i/o side effects and the __iomem
@@ -95,7 +107,7 @@ void *memremap(resource_size_t offset, size_t size, unsigned long flags)* the requested range is potentially in System RAM. */ if (is_ram ==REGION_INTERSECTS ) - addr =try_ram_remap (offset, size); + addr =try_ram_remap (offset, size, flags);if (!addr) addr =arch_memremap_wb (offset, size); }
mm/early_ioremap.c +15 -3
@@ -30,6 +30,13 @@ static int __init early_ioremap_debug_setup(char *str)static int after_paging_init__initdata ; +pgprot_t __init __weak early_memremap_pgprot_adjust (resource_size_t phys_addr, +unsigned long size, +pgprot_t prot) +{ +return prot; +} +void __init __weak early_ioremap_shutdown (void ) { }
@@ -215,14 +222,19 @@ void __init early_iounmap(void __iomem *addr, unsigned long size)void __init *early_memremap (resource_size_t phys_addr,unsigned long size) { -return (__force void *)__early_ioremap (phys_addr, size, -FIXMAP_PAGE_NORMAL ); +pgprot_t prot =early_memremap_pgprot_adjust (phys_addr, size, +FIXMAP_PAGE_NORMAL ); + +return (__force void *)__early_ioremap (phys_addr, size, prot); }#ifdef FIXMAP_PAGE_RO void __init *early_memremap_ro (resource_size_t phys_addr,unsigned long size) { -return (__force void *)__early_ioremap (phys_addr, size,FIXMAP_PAGE_RO ); +pgprot_t prot =early_memremap_pgprot_adjust (phys_addr, size, +FIXMAP_PAGE_RO ); + +return (__force void *)__early_ioremap (phys_addr, size, prot); }#endif
Signature · 7 lines
1.9.1 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
tip-bot for Tom Lendacky
merge bot[tip:x86/mm] x86/mm: Add support to access boot related data in the clear
x86/mm: Add support to access boot related data in the clear
Commit-ID: 8f716c9b5febf6ed0f5fedb7c9407cd0c25b2796 Gitweb: http://git.kernel.org/tip/8f716c9b5febf6ed0f5fedb7c9407cd0c25b2796 Author: Tom Lendacky <[email protected]> AuthorDate: Mon, 17 Jul 2017 16:10:16 -0500 Committer: Ingo Molnar <[email protected]> CommitDate: Tue, 18 Jul 2017 11:38:02 +0200
x86/mm: Add support to access boot related data in the clear
Boot data (such as EFI related data) is not encrypted when the system is booted because UEFI/BIOS does not run with SME active. In order to access this data properly it needs to be mapped decrypted.
Update early_memremap() to provide an arch specific routine to modify the pagetable protection attributes before they are applied to the new mapping. This is used to remove the encryption mask for boot related data.
Update memremap() to provide an arch specific routine to determine if RAM remapping is allowed. RAM remapping will cause an encrypted mapping to be generated. By preventing RAM remapping, ioremap_cache() will be used instead, which will provide a decrypted mapping of the boot related data.
--- arch/x86/include/asm/io.h | 5 ++ arch/x86/mm/ioremap.c | 180 ++++++++++++++++++++++++++++++++++++++++++++++ include/linux/io.h | 2 + kernel/memremap.c | 20 ++++-- mm/early_ioremap.c | 18 ++++- 5 files changed, 218 insertions(+), 7 deletions(-)
arch/x86/include/asm/io.h +5 -0
@@ -381,4 +381,9 @@ extern void arch_io_free_memtype_wc(resource_size_t start, resource_size_t size)#define arch_io_reserve_memtype_wc arch_io_reserve_memtype_wc#endif +extern bool arch_memremap_can_ram_remap (resource_size_t offset, +unsigned long size, +unsigned long flags); +#define arch_memremap_can_ram_remap arch_memremap_can_ram_remap +#endif /* _ASM_X86_IO_H */
arch/x86/mm/ioremap.c +180 -0
198 lines not on this page · raw message
include/linux/io.h +2 -0
@@ -157,6 +157,8 @@ enum {MEMREMAP_WB =1 <<0 ,MEMREMAP_WT =1 <<1 ,MEMREMAP_WC =1 <<2 , +MEMREMAP_ENC =1 <<3 , + MEMREMAP_DEC = 1 << 4, };void *memremap (resource_size_t offset,size_t size,unsigned long flags);
kernel/memremap.c +16 -4
@@ -34,13 +34,24 @@ static void *arch_memremap_wb(resource_size_t offset, unsigned long size) }#endif -static void *try_ram_remap (resource_size_t offset,size_t size) +#ifndef arch_memremap_can_ram_remap +static bool arch_memremap_can_ram_remap (resource_size_t offset,size_t size, +unsigned long flags) +{ +return true; +} +#endif + +static void *try_ram_remap (resource_size_t offset,size_t size, +unsigned long flags) {unsigned long pfn =PHYS_PFN (offset);/* In the simple case just return the existing linear address */ -if (pfn_valid (pfn) && !PageHighMem (pfn_to_page (pfn))) +if (pfn_valid (pfn) && !PageHighMem (pfn_to_page (pfn)) && +arch_memremap_can_ram_remap (offset, size, flags))return __va (offset); +return NULL ;/* fallback to arch_memremap_wb */ }
@@ -48,7 +59,8 @@ static void *try_ram_remap(resource_size_t offset, size_t size)* memremap() - remap an iomem_resource as cacheable memory * @offset: iomem resource start address * @size: size of remap -* @flags: any of MEMREMAP_WB, MEMREMAP_WT and MEMREMAP_WC +* @flags: any of MEMREMAP_WB, MEMREMAP_WT, MEMREMAP_WC, +* MEMREMAP_ENC, MEMREMAP_DEC * * memremap() is "ioremap" for cases where it is known that the resource * being mapped does not have i/o side effects and the __iomem
@@ -95,7 +107,7 @@ void *memremap(resource_size_t offset, size_t size, unsigned long flags)* the requested range is potentially in System RAM. */ if (is_ram ==REGION_INTERSECTS ) - addr =try_ram_remap (offset, size); + addr =try_ram_remap (offset, size, flags);if (!addr) addr =arch_memremap_wb (offset, size); }
mm/early_ioremap.c +15 -3
@@ -30,6 +30,13 @@ early_param("early_ioremap_debug", early_ioremap_debug_setup);static int after_paging_init__initdata ; +pgprot_t __init __weak early_memremap_pgprot_adjust (resource_size_t phys_addr, +unsigned long size, +pgprot_t prot) +{ +return prot; +} +void __init __weak early_ioremap_shutdown (void ) { }
@@ -215,14 +222,19 @@ early_ioremap(resource_size_t phys_addr, unsigned long size)void __init *early_memremap (resource_size_t phys_addr,unsigned long size) { -return (__force void *)__early_ioremap (phys_addr, size, -FIXMAP_PAGE_NORMAL ); +pgprot_t prot =early_memremap_pgprot_adjust (phys_addr, size, +FIXMAP_PAGE_NORMAL ); + +return (__force void *)__early_ioremap (phys_addr, size, prot); }#ifdef FIXMAP_PAGE_RO void __init *early_memremap_ro (resource_size_t phys_addr,unsigned long size) { -return (__force void *)__early_ioremap (phys_addr, size,FIXMAP_PAGE_RO ); +pgprot_t prot =early_memremap_pgprot_adjust (phys_addr, size, +FIXMAP_PAGE_RO ); + +return (__force void *)__early_ioremap (phys_addr, size, prot); }#endif
PATCH v10 20/38 x86, mpparse: Use memremap to map the mpf and mpc data
In reply to Tom LendackyThe SMP MP-table is built by UEFI and placed in memory in a decrypted state. These tables are accessed using a mix of early_memremap(), early_memunmap(), phys_to_virt() and virt_to_phys(). Change all accesses to use early_memremap()/early_memunmap(). This allows for proper setting of the encryption mask so that the data can be successfully accessed when SME is active.
--- arch/x86/kernel/mpparse.c | 98 +++++++++++++++++++++++++++++++++-------------- 1 file changed, 70 insertions(+), 28 deletions(-)
arch/x86/kernel/mpparse.c +70 -28
@@ -429,7 +429,7 @@ static inline void __init construct_default_ISA_mptable(int mpc_default_type) } } -static struct mpf_intel *mpf_found; +static unsigned long mpf_base;static unsigned long __init get_mpc_size (unsigned long physptr) {
@@ -451,6 +451,7 @@ static int __init check_physptr(struct mpf_intel *mpf, unsigned int early) size =get_mpc_size (mpf->physptr); mpc =early_memremap (mpf->physptr, size); +/* * Read the physical hardware table. Anything here will * override the defaults.
@@ -497,12 +498,12 @@ static int __init check_physptr(struct mpf_intel *mpf, unsigned int early)*/ void __init default_get_smp_config (unsigned int early) { -struct mpf_intel *mpf = mpf_found; +struct mpf_intel *mpf;if (!smp_found_config)return ; -if (!mpf) +if (!mpf_base)return ;if (acpi_lapic && early)
@@ -515,6 +516,12 @@ void __init default_get_smp_config(unsigned int early)if (acpi_lapic && acpi_ioapic)return ; + mpf =early_memremap (mpf_base,sizeof (*mpf)); +if (!mpf) { +pr_err ("MPTABLE: error mapping MP table\n" ); +return ; + } +pr_info ("Intel MultiProcessor Specification v1.%d\n" , mpf->specification);#if defined(CONFIG_X86_LOCAL_APIC ) && defined(CONFIG_X86_32 )
@@ -529,7 +536,7 @@ void __init default_get_smp_config(unsigned int early)/* * Now see if we need to read further. */ -if (mpf->feature1 !=0 ) { +if (mpf->feature1) {if (early) {/* * local APIC has default address
@@ -542,8 +549,10 @@ void __init default_get_smp_config(unsigned int early)construct_default_ISA_mptable (mpf->feature1); }else if (mpf->physptr) { -if (check_physptr (mpf, early)) +if (check_physptr (mpf, early)) { +early_memunmap (mpf,sizeof (*mpf));return ; + } }else BUG ();
@@ -552,6 +561,8 @@ void __init default_get_smp_config(unsigned int early)/* * Only use the first configuration found. */ + +early_memunmap (mpf,sizeof (*mpf)); }static void __init smp_reserve_memory (struct mpf_intel *mpf)
@@ -561,15 +572,16 @@ static void __init smp_reserve_memory(struct mpf_intel *mpf)static int __init smp_scan_config (unsigned long base,unsigned long length) { -unsigned int *bp =phys_to_virt (base); +unsigned int *bp;struct mpf_intel *mpf; -unsigned long mem; +int ret =0 ;apic_printk (APIC_VERBOSE ,"Scan for SMP in [mem %#010lx-%#010lx]\n" , base, base + length -1 );BUILD_BUG_ON (sizeof (*mpf) !=16 );while (length >0 ) { + bp =early_memremap (base, length); mpf = (struct mpf_intel *)bp; if ((*bp == SMP_MAGIC_IDENT) && (mpf->length == 1) &&
@@ -579,24 +591,26 @@ static int __init smp_scan_config(unsigned long base, unsigned long length)#ifdef CONFIG_X86_LOCAL_APIC smp_found_config =1 ;#endif - mpf_found = mpf; + mpf_base = base; -pr_info ("found SMP MP-table at [mem %#010llx-%#010llx] mapped at [%p]\n" , - (unsigned long long )virt_to_phys (mpf), - (unsigned long long )virt_to_phys (mpf) + -sizeof (*mpf) -1 , mpf); +pr_info ("found SMP MP-table at [mem %#010lx-%#010lx] mapped at [%p]\n" , + base, base +sizeof (*mpf) -1 , mpf); - mem =virt_to_phys (mpf); -memblock_reserve (mem,sizeof (*mpf)); +memblock_reserve (base,sizeof (*mpf));if (mpf->physptr)smp_reserve_memory (mpf); -return 1 ; + ret =1 ; } - bp +=4 ; +early_memunmap (bp, length); + +if (ret) +break ; + + base +=16 ; length -=16 ; } -return 0 ; +return ret; }void __init default_find_smp_config (void )
@@ -838,29 +852,40 @@ static int __init update_mp_table(void)char oem[10 ];struct mpf_intel *mpf;struct mpc_table *mpc, *mpc_new; +unsigned long size;if (!enable_update_mptable)return 0 ; - mpf = mpf_found; -if (!mpf) +if (!mpf_base) +return 0 ; + + mpf =early_memremap (mpf_base,sizeof (*mpf)); +if (!mpf) { +pr_err ("MPTABLE: mpf early_memremap() failed\n" );return 0 ; + }/* * Now see if we need to go further. */ -if (mpf->feature1 !=0 ) -return 0 ; +if (mpf->feature1) + goto do_unmap_mpf;if (!mpf->physptr) -return 0 ; + goto do_unmap_mpf; - mpc =phys_to_virt (mpf->physptr); + size =get_mpc_size (mpf->physptr); + mpc =early_memremap (mpf->physptr, size); +if (!mpc) { +pr_err ("MPTABLE: mpc early_memremap() failed\n" ); + goto do_unmap_mpf; + }if (!smp_check_mpc (mpc, oem, str)) -return 0 ; + goto do_unmap_mpc; -pr_info ("mpf: %llx\n" , (u64 )virt_to_phys (mpf)); +pr_info ("mpf: %llx\n" , (u64 )mpf_base);pr_info ("physptr: %x\n" , mpf->physptr);if (mpc_new_phys && mpc->length > mpc_new_length) {
@@ -878,21 +903,32 @@ static int __init update_mp_table(void) new =mpf_checksum ((unsigned char *)mpc, mpc->length);if (old == new) {pr_info ("mpc is readonly, please try alloc_mptable instead\n" ); -return 0 ; + goto do_unmap_mpc; }pr_info ("use in-position replacing\n" ); }else { + mpc_new =early_memremap (mpc_new_phys, mpc_new_length); +if (!mpc_new) { +pr_err ("MPTABLE: new mpc early_memremap() failed\n" ); + goto do_unmap_mpc; + } mpf->physptr = mpc_new_phys; - mpc_new =phys_to_virt (mpc_new_phys);memcpy (mpc_new, mpc, mpc->length); +early_memunmap (mpc, size); mpc = mpc_new; + size = mpc_new_length;/* check if we can modify that */ if (mpc_new_phys - mpf->physptr) {struct mpf_intel *mpf_new;/* steal 16 bytes from [0, 1k) */ + mpf_new =early_memremap (0x400 -16 ,sizeof (*mpf_new)); +if (!mpf_new) { +pr_err ("MPTABLE: new mpf early_memremap() failed\n" ); + goto do_unmap_mpc; + }pr_info ("mpf new: %x\n" ,0x400 -16 ); - mpf_new =phys_to_virt (0x400 -16 );memcpy (mpf_new, mpf,16 ); +early_memunmap (mpf,sizeof (*mpf)); mpf = mpf_new; mpf->physptr = mpc_new_phys; }
@@ -909,6 +945,12 @@ static int __init update_mp_table(void)*/ replace_intsrc_all (mpc, mpc_new_phys, mpc_new_length); +do_unmap_mpc: +early_memunmap (mpc, size); + +do_unmap_mpf: +early_memunmap (mpf,sizeof (*mpf)); +return 0 ; }
Signature · 7 lines
1.9.1 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
tip-bot for Tom Lendacky
merge bot[tip:x86/mm] x86/boot: Use memremap() to map the MPF and MPC data
x86/boot: Use memremap() to map the MPF and MPC data
Commit-ID: 5997efb967565e858259401af394e8449629c1f0 Gitweb: http://git.kernel.org/tip/5997efb967565e858259401af394e8449629c1f0 Author: Tom Lendacky <[email protected]> AuthorDate: Mon, 17 Jul 2017 16:10:17 -0500 Committer: Ingo Molnar <[email protected]> CommitDate: Tue, 18 Jul 2017 11:38:02 +0200
x86/boot: Use memremap() to map the MPF and MPC data
The SMP MP-table is built by UEFI and placed in memory in a decrypted state. These tables are accessed using a mix of early_memremap(), early_memunmap(), phys_to_virt() and virt_to_phys(). Change all accesses to use early_memremap()/early_memunmap(). This allows for proper setting of the encryption mask so that the data can be successfully accessed when SME is active.
--- arch/x86/kernel/mpparse.c | 98 +++++++++++++++++++++++++++++++++-------------- 1 file changed, 70 insertions(+), 28 deletions(-)
arch/x86/kernel/mpparse.c +70 -28
@@ -429,7 +429,7 @@ static inline void __init construct_default_ISA_mptable(int mpc_default_type) } } -static struct mpf_intel *mpf_found; +static unsigned long mpf_base;static unsigned long __init get_mpc_size (unsigned long physptr) {
@@ -451,6 +451,7 @@ static int __init check_physptr(struct mpf_intel *mpf, unsigned int early) size =get_mpc_size (mpf->physptr); mpc =early_memremap (mpf->physptr, size); +/* * Read the physical hardware table. Anything here will * override the defaults.
@@ -497,12 +498,12 @@ static int __init check_physptr(struct mpf_intel *mpf, unsigned int early)*/ void __init default_get_smp_config (unsigned int early) { -struct mpf_intel *mpf = mpf_found; +struct mpf_intel *mpf;if (!smp_found_config)return ; -if (!mpf) +if (!mpf_base)return ;if (acpi_lapic && early)
@@ -515,6 +516,12 @@ void __init default_get_smp_config(unsigned int early)if (acpi_lapic && acpi_ioapic)return ; + mpf =early_memremap (mpf_base,sizeof (*mpf)); +if (!mpf) { +pr_err ("MPTABLE: error mapping MP table\n" ); +return ; + } +pr_info ("Intel MultiProcessor Specification v1.%d\n" , mpf->specification);#if defined(CONFIG_X86_LOCAL_APIC ) && defined(CONFIG_X86_32 )
@@ -529,7 +536,7 @@ void __init default_get_smp_config(unsigned int early)/* * Now see if we need to read further. */ -if (mpf->feature1 !=0 ) { +if (mpf->feature1) {if (early) {/* * local APIC has default address
@@ -542,8 +549,10 @@ void __init default_get_smp_config(unsigned int early)construct_default_ISA_mptable (mpf->feature1); }else if (mpf->physptr) { -if (check_physptr (mpf, early)) +if (check_physptr (mpf, early)) { +early_memunmap (mpf,sizeof (*mpf));return ; + } }else BUG ();
@@ -552,6 +561,8 @@ void __init default_get_smp_config(unsigned int early)/* * Only use the first configuration found. */ + +early_memunmap (mpf,sizeof (*mpf)); }static void __init smp_reserve_memory (struct mpf_intel *mpf)
@@ -561,15 +572,16 @@ static void __init smp_reserve_memory(struct mpf_intel *mpf)static int __init smp_scan_config (unsigned long base,unsigned long length) { -unsigned int *bp =phys_to_virt (base); +unsigned int *bp;struct mpf_intel *mpf; -unsigned long mem; +int ret =0 ;apic_printk (APIC_VERBOSE ,"Scan for SMP in [mem %#010lx-%#010lx]\n" , base, base + length -1 );BUILD_BUG_ON (sizeof (*mpf) !=16 );while (length >0 ) { + bp =early_memremap (base, length); mpf = (struct mpf_intel *)bp; if ((*bp == SMP_MAGIC_IDENT) && (mpf->length == 1) &&
@@ -579,24 +591,26 @@ static int __init smp_scan_config(unsigned long base, unsigned long length)#ifdef CONFIG_X86_LOCAL_APIC smp_found_config =1 ;#endif - mpf_found = mpf; + mpf_base = base; -pr_info ("found SMP MP-table at [mem %#010llx-%#010llx] mapped at [%p]\n" , - (unsigned long long )virt_to_phys (mpf), - (unsigned long long )virt_to_phys (mpf) + -sizeof (*mpf) -1 , mpf); +pr_info ("found SMP MP-table at [mem %#010lx-%#010lx] mapped at [%p]\n" , + base, base +sizeof (*mpf) -1 , mpf); - mem =virt_to_phys (mpf); -memblock_reserve (mem,sizeof (*mpf)); +memblock_reserve (base,sizeof (*mpf));if (mpf->physptr)smp_reserve_memory (mpf); -return 1 ; + ret =1 ; } - bp +=4 ; +early_memunmap (bp, length); + +if (ret) +break ; + + base +=16 ; length -=16 ; } -return 0 ; +return ret; }void __init default_find_smp_config (void )
@@ -838,29 +852,40 @@ static int __init update_mp_table(void)char oem[10 ];struct mpf_intel *mpf;struct mpc_table *mpc, *mpc_new; +unsigned long size;if (!enable_update_mptable)return 0 ; - mpf = mpf_found; -if (!mpf) +if (!mpf_base) +return 0 ; + + mpf =early_memremap (mpf_base,sizeof (*mpf)); +if (!mpf) { +pr_err ("MPTABLE: mpf early_memremap() failed\n" );return 0 ; + }/* * Now see if we need to go further. */ -if (mpf->feature1 !=0 ) -return 0 ; +if (mpf->feature1) + goto do_unmap_mpf;if (!mpf->physptr) -return 0 ; + goto do_unmap_mpf; - mpc =phys_to_virt (mpf->physptr); + size =get_mpc_size (mpf->physptr); + mpc =early_memremap (mpf->physptr, size); +if (!mpc) { +pr_err ("MPTABLE: mpc early_memremap() failed\n" ); + goto do_unmap_mpf; + }if (!smp_check_mpc (mpc, oem, str)) -return 0 ; + goto do_unmap_mpc; -pr_info ("mpf: %llx\n" , (u64 )virt_to_phys (mpf)); +pr_info ("mpf: %llx\n" , (u64 )mpf_base);pr_info ("physptr: %x\n" , mpf->physptr);if (mpc_new_phys && mpc->length > mpc_new_length) {
@@ -878,21 +903,32 @@ static int __init update_mp_table(void) new =mpf_checksum ((unsigned char *)mpc, mpc->length);if (old == new) {pr_info ("mpc is readonly, please try alloc_mptable instead\n" ); -return 0 ; + goto do_unmap_mpc; }pr_info ("use in-position replacing\n" ); }else { + mpc_new =early_memremap (mpc_new_phys, mpc_new_length); +if (!mpc_new) { +pr_err ("MPTABLE: new mpc early_memremap() failed\n" ); + goto do_unmap_mpc; + } mpf->physptr = mpc_new_phys; - mpc_new =phys_to_virt (mpc_new_phys);memcpy (mpc_new, mpc, mpc->length); +early_memunmap (mpc, size); mpc = mpc_new; + size = mpc_new_length;/* check if we can modify that */ if (mpc_new_phys - mpf->physptr) {struct mpf_intel *mpf_new;/* steal 16 bytes from [0, 1k) */ + mpf_new =early_memremap (0x400 -16 ,sizeof (*mpf_new)); +if (!mpf_new) { +pr_err ("MPTABLE: new mpf early_memremap() failed\n" ); + goto do_unmap_mpc; + }pr_info ("mpf new: %x\n" ,0x400 -16 ); - mpf_new =phys_to_virt (0x400 -16 );memcpy (mpf_new, mpf,16 ); +early_memunmap (mpf,sizeof (*mpf)); mpf = mpf_new; mpf->physptr = mpc_new_phys; }
@@ -909,6 +945,12 @@ static int __init update_mp_table(void)*/ replace_intsrc_all (mpc, mpc_new_phys, mpc_new_length); +do_unmap_mpc: +early_memunmap (mpc, size); + +do_unmap_mpf: +early_memunmap (mpf,sizeof (*mpf)); +return 0 ; }
PATCH 1/1 x86/boot: Fix memremap() related build failure
Quoted 7 lines · tip-bot for Tom Lendacky
Commit-ID: 5997efb967565e858259401af394e8449629c1f0 Gitweb: http://git.kernel.org/tip/5997efb967565e858259401af394e8449629c1f0 Author: Tom Lendacky <[email protected]> AuthorDate: Mon, 17 Jul 2017 16:10:17 -0500 Committer: Ingo Molnar <[email protected]> CommitDate: Tue, 18 Jul 2017 11:38:02 +0200
Quoted 8 lines
x86/boot: Use
memremap()to map the MPF and MPC dataThe SMP MP-table is built by UEFI and placed in memory in a decrypted state. These tables are accessed using a mix of
early_memremap(),early_memunmap(),phys_to_virt()andvirt_to_phys(). Change all accesses to use early_memremap()/early_memunmap(). This allows for proper setting of the encryption mask so that the data can be successfully accessed when SME is active.
There's a build failure caused by this commit, with the attached (randconfig) config:
drivers/sfi/sfi_core.c: In function ‘sfi_map_memory’:
drivers/sfi/sfi_core.c:104:10: error: implicit declaration of function ‘memremap’ [-Werror=implicit-function-declaration] drivers/sfi/sfi_core.c:104:31: error: ‘MEMREMAP_WB’ undeclared (first use in this function)
This is a case of parasitic header dependencies: the sfi_core.c file indirectly includes <linux/io.h> for typical - but not all configs.
Including <linux/io.h> explicitly solves the build failure.
--- drivers/sfi/sfi_core.c | 1 + 1 file changed, 1 insertion(+)
drivers/sfi/sfi_core.c +1 -0
@@ -68,6 +68,7 @@#include <linux/init.h> #include <linux/sfi.h> #include <linux/slab.h> +#include <linux/io.h> #include "sfi_core.h"
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 4.13.0-rc1 Kernel Configuration
#CONFIG_64BIT=yCONFIG_X86_64=yCONFIG_X86=yCONFIG_INSTRUCTION_DECODER=y CONFIG_OUTPUT_FORMAT="elf64-x86-64" CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig" CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=yCONFIG_MMU=yCONFIG_ARCH_MMAP_RND_BITS_MIN=28 CONFIG_ARCH_MMAP_RND_BITS_MAX=32 CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8 CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16 CONFIG_NEED_DMA_MAP_STATE=y CONFIG_NEED_SG_DMA_LENGTH=yCONFIG_GENERIC_BUG=y CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y CONFIG_GENERIC_HWEIGHT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y CONFIG_ARCH_WANT_GENERAL_HUGETLB=y CONFIG_ZONE_DMA32=yCONFIG_AUDIT_ARCH=y CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_X86_64_SMP=yCONFIG_ARCH_SUPPORTS_UPROBES=y CONFIG_FIX_EARLYCON_MEM=yCONFIG_PGTABLE_LEVELS=4 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=yCONFIG_IRQ_WORK=yCONFIG_BUILDTIME_EXTABLE_SORT=y CONFIG_THREAD_INFO_IN_TASK=y
#
# General setup
#CONFIG_INIT_ENV_ARG_LIMIT=32CONFIG_CROSS_COMPILE=""CONFIG_COMPILE_TEST=yCONFIG_LOCALVERSION=""CONFIG_HAVE_KERNEL_GZIP=yCONFIG_HAVE_KERNEL_BZIP2=yCONFIG_HAVE_KERNEL_LZMA=yCONFIG_HAVE_KERNEL_XZ=yCONFIG_HAVE_KERNEL_LZO=yCONFIG_HAVE_KERNEL_LZ4=y
# CONFIG_KERNEL_GZIP is not setCONFIG_KERNEL_BZIP2=y
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not setCONFIG_DEFAULT_HOSTNAME="(none)"CONFIG_SWAP=yCONFIG_SYSVIPC=y
# CONFIG_CROSS_MEMORY_ATTACH is not set
# CONFIG_FHANDLE is not set
# CONFIG_USELIB is not setCONFIG_HAVE_ARCH_AUDITSYSCALL=y
#
# IRQ subsystem
#CONFIG_GENERIC_IRQ_PROBE=yCONFIG_GENERIC_IRQ_SHOW=yCONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=yCONFIG_GENERIC_PENDING_IRQ=yCONFIG_GENERIC_IRQ_MIGRATION=yCONFIG_GENERIC_IRQ_CHIP=yCONFIG_IRQ_DOMAIN=yCONFIG_IRQ_DOMAIN_HIERARCHY=yCONFIG_IRQ_DOMAIN_DEBUG=yCONFIG_IRQ_FORCED_THREADING=yCONFIG_SPARSE_IRQ=yCONFIG_GENERIC_IRQ_DEBUGFS=yCONFIG_CLOCKSOURCE_WATCHDOG=yCONFIG_ARCH_CLOCKSOURCE_DATA=yCONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=yCONFIG_GENERIC_TIME_VSYSCALL=yCONFIG_GENERIC_CLOCKEVENTS=yCONFIG_GENERIC_CLOCKEVENTS_BROADCAST=yCONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=yCONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#CONFIG_TICK_ONESHOT=yCONFIG_HZ_PERIODIC=y
# CONFIG_NO_HZ_IDLE is not set
# CONFIG_NO_HZ_FULL is not setCONFIG_NO_HZ=yCONFIG_HIGH_RES_TIMERS=y
#
# CPU/Task time and stats accounting
#CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
#
# RCU Subsystem
#CONFIG_TREE_RCU=yCONFIG_RCU_EXPERT=yCONFIG_SRCU=yCONFIG_TREE_SRCU=yCONFIG_TASKS_RCU=yCONFIG_RCU_STALL_COMMON=yCONFIG_RCU_NEED_SEGCBLIST=yCONFIG_RCU_FANOUT=64CONFIG_RCU_FANOUT_LEAF=16
# CONFIG_RCU_NOCB_CPU is not setCONFIG_BUILD_BIN2C=yCONFIG_IKCONFIG=yCONFIG_LOG_BUF_SHIFT=20CONFIG_LOG_CPU_MAX_BUF_SHIFT=12CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=yCONFIG_ARCH_SUPPORTS_NUMA_BALANCING=yCONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=yCONFIG_ARCH_SUPPORTS_INT128=y
# CONFIG_CGROUPS is not setCONFIG_CHECKPOINT_RESTORE=y
# CONFIG_SCHED_AUTOGROUP is not setCONFIG_SYSFS_DEPRECATED=y
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not setCONFIG_BLK_DEV_INITRD=yCONFIG_INITRAMFS_SOURCE=""
# CONFIG_RD_GZIP is not set
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_RD_XZ is not set
# CONFIG_RD_LZO is not set
# CONFIG_RD_LZ4 is not setCONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not setCONFIG_ANON_INODES=yCONFIG_HAVE_UID16=yCONFIG_SYSCTL_EXCEPTION_TRACE=yCONFIG_HAVE_PCSPKR_PLATFORM=yCONFIG_BPF=yCONFIG_EXPERT=y
# CONFIG_MULTIUSER is not set
# CONFIG_SGETMASK_SYSCALL is not set
# CONFIG_SYSFS_SYSCALL is not set
# CONFIG_POSIX_TIMERS is not setCONFIG_KALLSYMS=yCONFIG_KALLSYMS_ALL=yCONFIG_KALLSYMS_ABSOLUTE_PERCPU=yCONFIG_KALLSYMS_BASE_RELATIVE=yCONFIG_PRINTK=yCONFIG_PRINTK_NMI=yCONFIG_BUG=yCONFIG_PCSPKR_PLATFORM=yCONFIG_BASE_FULL=yCONFIG_FUTEX=yCONFIG_EPOLL=y
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not setCONFIG_BPF_SYSCALL=y
# CONFIG_SHMEM is not set
# CONFIG_AIO is not set
# CONFIG_ADVISE_SYSCALLS is not setCONFIG_USERFAULTFD=y
# CONFIG_MEMBARRIER is not setCONFIG_EMBEDDED=yCONFIG_HAVE_PERF_EVENTS=yCONFIG_PERF_USE_VMALLOC=y
# CONFIG_PC104 is not set
#
# Kernel Performance Events And Counters
#CONFIG_PERF_EVENTS=y CONFIG_DEBUG_PERF_USE_VMALLOC=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
# CONFIG_SLUB is not setCONFIG_SLOB=yCONFIG_SLAB_MERGE_DEFAULT=y
# CONFIG_SYSTEM_DATA_VERIFICATION is not set CONFIG_PROFILING=yCONFIG_CRASH_CORE=yCONFIG_KEXEC_CORE=yCONFIG_OPROFILE=y
# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set CONFIG_HAVE_OPROFILE=y CONFIG_OPROFILE_NMI_TIMER=y
# CONFIG_JUMP_LABEL is not set
# CONFIG_UPROBES is not set
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_ARCH_USE_BUILTIN_BSWAP=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_OPTPROBES=y CONFIG_HAVE_KPROBES_ON_FTRACE=y CONFIG_HAVE_NMI=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_CONTIGUOUS=y CONFIG_GENERIC_SMP_IDLE_THREAD=y CONFIG_ARCH_HAS_FORTIFY_SOURCE=y CONFIG_ARCH_HAS_SET_MEMORY=y CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y CONFIG_HAVE_DMA_API_DEBUG=y CONFIG_HAVE_HW_BREAKPOINT=y CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y CONFIG_HAVE_USER_RETURN_NOTIFIER=y CONFIG_HAVE_PERF_EVENTS_NMI=y CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y CONFIG_HAVE_PERF_REGS=y CONFIG_HAVE_PERF_USER_STACK_DUMP=y CONFIG_HAVE_ARCH_JUMP_LABEL=y CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y CONFIG_HAVE_CMPXCHG_LOCAL=y CONFIG_HAVE_CMPXCHG_DOUBLE=y CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y CONFIG_HAVE_ARCH_SECCOMP_FILTER=y CONFIG_HAVE_GCC_PLUGINS=y CONFIG_HAVE_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR is not set CONFIG_CC_STACKPROTECTOR_NONE=y
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set # CONFIG_CC_STACKPROTECTOR_STRONG is not set CONFIG_THIN_ARCHIVES=y CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y CONFIG_HAVE_CONTEXT_TRACKING=y CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y CONFIG_HAVE_ARCH_HUGE_VMAP=y CONFIG_HAVE_ARCH_SOFT_DIRTY=y CONFIG_MODULES_USE_ELF_RELA=y CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y CONFIG_ARCH_HAS_ELF_RANDOMIZE=y CONFIG_HAVE_ARCH_MMAP_RND_BITS=y CONFIG_HAVE_EXIT_THREAD=y CONFIG_ARCH_MMAP_RND_BITS=28 CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8 CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y CONFIG_HAVE_COPY_THREAD_TLS=y CONFIG_HAVE_STACK_VALIDATION=y
# CONFIG_HAVE_ARCH_HASH is not set CONFIG_ISA_BUS_API=y CONFIG_OLD_SIGSUSPEND3=y CONFIG_COMPAT_OLD_SIGACTION=y
# CONFIG_CPU_NO_EFFICIENT_FFS is not set CONFIG_HAVE_ARCH_VMAP_STACK=y
# CONFIG_VMAP_STACK is not set
# CONFIG_ARCH_OPTIONAL_KERNEL_RWX is not set # CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y CONFIG_STRICT_KERNEL_RWX=y CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y CONFIG_REFCOUNT_FULL=y
#
# GCOV-based kernel profiling
#CONFIG_GCOV_KERNEL=yCONFIG_ARCH_HAS_GCOV_PROFILE_ALL=yCONFIG_GCOV_FORMAT_AUTODETECT=y
# CONFIG_GCOV_FORMAT_3_4 is not set
# CONFIG_GCOV_FORMAT_4_7 is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not setCONFIG_RT_MUTEXES=yCONFIG_BASE_SMALL=0
# CONFIG_MODULES is not setCONFIG_MODULES_TREE_LOOKUP=yCONFIG_BLOCK=yCONFIG_BLK_SCSI_REQUEST=yCONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_BSGLIB is not setCONFIG_BLK_DEV_INTEGRITY=y
# CONFIG_BLK_DEV_ZONED is not set
# CONFIG_BLK_CMDLINE_PARSER is not setCONFIG_BLK_WBT=y
# CONFIG_BLK_WBT_SQ is not setCONFIG_BLK_WBT_MQ=yCONFIG_BLK_DEBUG_FS=yCONFIG_BLK_SED_OPAL=y
#
# Partition Types
#CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not setCONFIG_AIX_PARTITION=yCONFIG_OSF_PARTITION=y
# CONFIG_AMIGA_PARTITION is not setCONFIG_ATARI_PARTITION=y
# CONFIG_MAC_PARTITION is not set
# CONFIG_MSDOS_PARTITION is not setCONFIG_LDM_PARTITION=yCONFIG_LDM_DEBUG=yCONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not setCONFIG_EFI_PARTITION=yCONFIG_SYSV68_PARTITION=y
# CONFIG_CMDLINE_PARTITION is not setCONFIG_BLOCK_COMPAT=yCONFIG_BLK_MQ_VIRTIO=y
#
# IO Schedulers
#CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not setCONFIG_IOSCHED_CFQ=yCONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not setCONFIG_DEFAULT_IOSCHED="cfq"CONFIG_MQ_IOSCHED_DEADLINE=yCONFIG_MQ_IOSCHED_KYBER=yCONFIG_IOSCHED_BFQ=yCONFIG_PADATA=yCONFIG_ASN1=yCONFIG_UNINLINE_SPIN_UNLOCK=yCONFIG_ARCH_SUPPORTS_ATOMIC_RMW=yCONFIG_MUTEX_SPIN_ON_OWNER=yCONFIG_RWSEM_SPIN_ON_OWNER=yCONFIG_LOCK_SPIN_ON_OWNER=yCONFIG_ARCH_USE_QUEUED_SPINLOCKS=yCONFIG_QUEUED_SPINLOCKS=yCONFIG_ARCH_USE_QUEUED_RWLOCKS=yCONFIG_QUEUED_RWLOCKS=yCONFIG_FREEZER=y
#
# Processor type and features
#
# CONFIG_ZONE_DMA is not setCONFIG_SMP=y
# CONFIG_X86_FEATURE_NAMES is not set
# CONFIG_X86_FAST_FEATURE_TESTS is not set
# CONFIG_X86_X2APIC is not set
# CONFIG_X86_MPPARSE is not set
# CONFIG_GOLDFISH is not setCONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_GOLDFISH is not setCONFIG_IOSF_MBI=y
# CONFIG_IOSF_MBI_DEBUG is not setCONFIG_X86_SUPPORTS_MEMORY_FAILURE=yCONFIG_SCHED_OMIT_FRAME_POINTER=yCONFIG_HYPERVISOR_GUEST=yCONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
# CONFIG_PARAVIRT_SPINLOCKS is not setCONFIG_XEN=y
# CONFIG_XEN_PV is not setCONFIG_XEN_SAVE_RESTORE=yCONFIG_XEN_DEBUG_FS=y
# CONFIG_KVM_GUEST is not setCONFIG_PARAVIRT_TIME_ACCOUNTING=yCONFIG_PARAVIRT_CLOCK=yCONFIG_NO_BOOTMEM=y
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not setCONFIG_GENERIC_CPU=yCONFIG_X86_INTERNODE_CACHE_SHIFT=6CONFIG_X86_L1_CACHE_SHIFT=6CONFIG_X86_TSC=yCONFIG_X86_CMPXCHG64=yCONFIG_X86_CMOV=yCONFIG_X86_MINIMUM_CPU_FAMILY=64CONFIG_X86_DEBUGCTLMSR=yCONFIG_PROCESSOR_SELECT=y
# CONFIG_CPU_SUP_INTEL is not set
# CONFIG_CPU_SUP_AMD is not set
# CONFIG_CPU_SUP_CENTAUR is not setCONFIG_HPET_TIMER=yCONFIG_DMI=yCONFIG_SWIOTLB=yCONFIG_IOMMU_HELPER=yCONFIG_MAXSMP=yCONFIG_NR_CPUS=8192CONFIG_SCHED_SMT=yCONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not setCONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not setCONFIG_PREEMPT_COUNT=yCONFIG_X86_LOCAL_APIC=yCONFIG_X86_IO_APIC=yCONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=yCONFIG_X86_MCE=yCONFIG_X86_MCELOG_LEGACY=y
# CONFIG_X86_MCE_INTEL is not setCONFIG_X86_MCE_INJECT=y
#
# Performance monitoring
#
# CONFIG_VM86 is not setCONFIG_X86_VSYSCALL_EMULATION=y
# CONFIG_I8K is not setCONFIG_X86_MSR=yCONFIG_X86_CPUID=yCONFIG_ARCH_PHYS_ADDR_T_64BIT=yCONFIG_ARCH_DMA_ADDR_T_64BIT=yCONFIG_ARCH_HAS_MEM_ENCRYPT=y
# CONFIG_NUMA is not setCONFIG_ARCH_SPARSEMEM_ENABLE=yCONFIG_ARCH_SPARSEMEM_DEFAULT=yCONFIG_ARCH_SELECT_MEMORY_MODEL=yCONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000CONFIG_SELECT_MEMORY_MODEL=yCONFIG_SPARSEMEM_MANUAL=yCONFIG_SPARSEMEM=yCONFIG_HAVE_MEMORY_PRESENT=yCONFIG_SPARSEMEM_EXTREME=yCONFIG_SPARSEMEM_VMEMMAP_ENABLE=yCONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=yCONFIG_SPARSEMEM_VMEMMAP=yCONFIG_HAVE_MEMBLOCK=yCONFIG_HAVE_MEMBLOCK_NODE_MAP=yCONFIG_HAVE_GENERIC_GUP=yCONFIG_ARCH_DISCARD_MEMBLOCK=yCONFIG_MEMORY_ISOLATION=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
# CONFIG_MEMORY_HOTPLUG is not setCONFIG_SPLIT_PTLOCK_CPUS=4CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=yCONFIG_MEMORY_BALLOON=y
# CONFIG_BALLOON_COMPACTION is not setCONFIG_COMPACTION=yCONFIG_MIGRATION=yCONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=yCONFIG_PHYS_ADDR_T_64BIT=yCONFIG_VIRT_TO_BUS=yCONFIG_KSM=yCONFIG_DEFAULT_MMAP_MIN_ADDR=4096CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
# CONFIG_TRANSPARENT_HUGEPAGE is not setCONFIG_ARCH_WANTS_THP_SWAP=yCONFIG_CLEANCACHE=yCONFIG_FRONTSWAP=yCONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
# CONFIG_CMA_DEBUGFS is not setCONFIG_CMA_AREAS=7CONFIG_ZSWAP=yCONFIG_ZPOOL=y
# CONFIG_ZBUD is not setCONFIG_Z3FOLD=y
# CONFIG_ZSMALLOC is not setCONFIG_GENERIC_EARLY_IOREMAP=yCONFIG_ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT=yCONFIG_IDLE_PAGE_TRACKING=yCONFIG_ARCH_HAS_ZONE_DEVICE=y
# CONFIG_PERCPU_STATS is not setCONFIG_X86_PMEM_LEGACY_DEVICE=yCONFIG_X86_PMEM_LEGACY=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not setCONFIG_X86_RESERVE_LOW=64
# CONFIG_MTRR is not setCONFIG_ARCH_RANDOM=yCONFIG_X86_SMAP=y
# CONFIG_SECCOMP is not setCONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not setCONFIG_HZ=100CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not setCONFIG_KEXEC_FILE=yCONFIG_KEXEC_VERIFY_SIG=y
# CONFIG_CRASH_DUMP is not setCONFIG_PHYSICAL_START=0x1000000CONFIG_RELOCATABLE=yCONFIG_RANDOMIZE_BASE=yCONFIG_X86_NEED_RELOCS=yCONFIG_PHYSICAL_ALIGN=0x200000
# CONFIG_RANDOMIZE_MEMORY is not setCONFIG_HOTPLUG_CPU=yCONFIG_BOOTPARAM_HOTPLUG_CPU0=y
# CONFIG_DEBUG_HOTPLUG_CPU0 is not setCONFIG_COMPAT_VDSO=yCONFIG_LEGACY_VSYSCALL_NATIVE=y
# CONFIG_LEGACY_VSYSCALL_EMULATE is not set
# CONFIG_LEGACY_VSYSCALL_NONE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_MODIFY_LDT_SYSCALL is not setCONFIG_HAVE_LIVEPATCH=yCONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management and ACPI options
#CONFIG_SUSPEND=yCONFIG_SUSPEND_FREEZER=yCONFIG_SUSPEND_SKIP_SYNC=yCONFIG_HIBERNATE_CALLBACKS=y
# CONFIG_HIBERNATION is not setCONFIG_PM_SLEEP=yCONFIG_PM_SLEEP_SMP=yCONFIG_PM_AUTOSLEEP=y
# CONFIG_PM_WAKELOCKS is not setCONFIG_PM=yCONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not setCONFIG_PM_SLEEP_DEBUG=yCONFIG_PM_TRACE=yCONFIG_PM_TRACE_RTC=yCONFIG_PM_OPP=yCONFIG_PM_GENERIC_DOMAINS=yCONFIG_WQ_POWER_EFFICIENT_DEFAULT=yCONFIG_PM_GENERIC_DOMAINS_SLEEP=yCONFIG_PM_GENERIC_DOMAINS_OF=yCONFIG_SFI=y
#
# CPU Frequency scaling
#CONFIG_CPU_FREQ=y
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set # CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set
#
# CPU frequency scaling drivers
#CONFIG_X86_INTEL_PSTATE=yCONFIG_X86_P4_CLOCKMOD=y
#
# shared options # CONFIG_X86_SPEEDSTEP_LIB=y
#
# CPU Idle
#
# CONFIG_CPU_IDLE is not set
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
#
# Bus options (PCI etc.)
#
# CONFIG_PCI is not setCONFIG_PCI_LOCKLESS_CONFIG=yCONFIG_PCI_LABEL=y
#
# DesignWare PCI Core Support
#
#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not setCONFIG_ISA_BUS=y
# CONFIG_ISA_DMA_API is not setCONFIG_PCCARD=yCONFIG_PCMCIA=y
# CONFIG_PCMCIA_LOAD_CIS is not set
#
# PC-card bridges
#
# CONFIG_X86_SYSFB is not set
#
# Executable file formats / Emulations
#CONFIG_BINFMT_ELF=yCONFIG_COMPAT_BINFMT_ELF=yCONFIG_ELFCORE=yCONFIG_BINFMT_SCRIPT=y
# CONFIG_HAVE_AOUT is not setCONFIG_BINFMT_MISC=y
# CONFIG_COREDUMP is not setCONFIG_IA32_EMULATION=yCONFIG_IA32_AOUT=y
# CONFIG_X86_X32 is not setCONFIG_COMPAT_32=yCONFIG_COMPAT=yCONFIG_COMPAT_FOR_U64_ALIGNMENT=yCONFIG_SYSVIPC_COMPAT=yCONFIG_X86_DEV_DMA_OPS=y
# CONFIG_NET is not setCONFIG_HAVE_EBPF_JIT=y
#
# Device Drivers
#
#
# Generic Driver Options
#
# CONFIG_UEVENT_HELPER is not set CONFIG_DEVTMPFS=yCONFIG_DEVTMPFS_MOUNT=y CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y CONFIG_FIRMWARE_IN_KERNEL=y CONFIG_EXTRA_FIRMWARE="" CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set # CONFIG_ALLOW_DEV_COREDUMP is not set
# CONFIG_DEBUG_DRIVER is not set CONFIG_DEBUG_DEVRES=y
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set CONFIG_SYS_HYPERVISOR=y
# CONFIG_GENERIC_CPU_DEVICES is not set CONFIG_GENERIC_CPU_AUTOPROBE=y CONFIG_SOC_BUS=yCONFIG_REGMAP=yCONFIG_REGMAP_I2C=yCONFIG_REGMAP_SPI=yCONFIG_REGMAP_SPMI=yCONFIG_REGMAP_MMIO=yCONFIG_REGMAP_IRQ=y CONFIG_DMA_SHARED_BUFFER=y CONFIG_DMA_FENCE_TRACE=y
# CONFIG_DMA_CMA is not set
#
# Bus devices
#CONFIG_QCOM_EBI2=y
# CONFIG_SIMPLE_PM_BUS is not set
# CONFIG_MTD is not setCONFIG_OF=y
# CONFIG_OF_UNITTEST is not set
# CONFIG_OF_ALL_DTBS is not setCONFIG_OF_DYNAMIC=yCONFIG_OF_ADDRESS=yCONFIG_OF_IRQ=yCONFIG_OF_RESOLVE=yCONFIG_OF_OVERLAY=yCONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=yCONFIG_PARPORT=y
# CONFIG_PARPORT_PC is not set
# CONFIG_PARPORT_GSC is not setCONFIG_PARPORT_AX88796=yCONFIG_PARPORT_1284=yCONFIG_PARPORT_NOT_PC=yCONFIG_BLK_DEV=yCONFIG_BLK_DEV_NULL_BLK=y
# CONFIG_BLK_DEV_COW_COMMON is not setCONFIG_BLK_DEV_LOOP=yCONFIG_BLK_DEV_LOOP_MIN_COUNT=8CONFIG_BLK_DEV_CRYPTOLOOP=y
#
# DRBD disabled because PROC_FS or INET not selected #CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_CDROM_PKTCDVD=y CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_XEN_BLKDEV_FRONTEND is not set CONFIG_VIRTIO_BLK=y
# CONFIG_VIRTIO_BLK_SCSI is not set CONFIG_NVME_CORE=yCONFIG_NVME_FABRICS=yCONFIG_NVME_FC=y
# CONFIG_NVME_TARGET is not set
#
# Misc devices
#CONFIG_SENSORS_LIS3LV02D=y
# CONFIG_AD525X_DPOT is not setCONFIG_DUMMY_IRQ=yCONFIG_ICS932S401=yCONFIG_ATMEL_SSC=y
# CONFIG_ENCLOSURE_SERVICES is not setCONFIG_QCOM_COINCELL=yCONFIG_APDS9802ALS=yCONFIG_ISL29003=yCONFIG_ISL29020=yCONFIG_SENSORS_TSL2550=yCONFIG_SENSORS_BH1770=yCONFIG_SENSORS_APDS990X=yCONFIG_HMC6352=yCONFIG_DS1682=yCONFIG_TI_DAC7512=y
# CONFIG_USB_SWITCH_FSA9480 is not setCONFIG_LATTICE_ECP3_CONFIG=y
# CONFIG_SRAM is not setCONFIG_ASPEED_LPC_CTRL=y
# CONFIG_ASPEED_LPC_SNOOP is not setCONFIG_C2PORT=yCONFIG_C2PORT_DURAMAR_2150=y
#
# EEPROM support
#CONFIG_EEPROM_AT24=yCONFIG_EEPROM_AT25=yCONFIG_EEPROM_LEGACY=y
# CONFIG_EEPROM_MAX6875 is not setCONFIG_EEPROM_93CX6=yCONFIG_EEPROM_93XX46=yCONFIG_EEPROM_IDT_89HPESX=y
#
# Texas Instruments shared transport line discipline #CONFIG_SENSORS_LIS3_SPI=y CONFIG_SENSORS_LIS3_I2C=y
#
# Altera FPGA firmware download module
#CONFIG_ALTERA_STAPL=y
#
# Intel MIC Bus Driver
#
#
# SCIF Bus Driver
#
#
# VOP Bus Driver
#
#
# Intel MIC Host Driver
#
#
# Intel MIC Card Driver
#
#
# SCIF Driver
#
#
# Intel MIC Coprocessor State Management (COSM) Drivers #
#
# VOP Driver
#CONFIG_ECHO=y
# CONFIG_CXL_BASE is not set
# CONFIG_CXL_AFU_DRIVER_OPS is not set
# CONFIG_CXL_LIB is not setCONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not setCONFIG_SCSI=yCONFIG_SCSI_DMA=y
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not setCONFIG_CHR_DEV_OSST=yCONFIG_BLK_DEV_SR=yCONFIG_BLK_DEV_SR_VENDOR=yCONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not setCONFIG_SCSI_CONSTANTS=yCONFIG_SCSI_LOGGING=yCONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not setCONFIG_SCSI_LOWLEVEL=yCONFIG_ISCSI_BOOT_SYSFS=yCONFIG_SCSI_UFSHCD=y
# CONFIG_SCSI_UFSHCD_PLATFORM is not setCONFIG_XEN_SCSI_FRONTEND=yCONFIG_SCSI_DEBUG=yCONFIG_SCSI_VIRTIO=yCONFIG_SCSI_LOWLEVEL_PCMCIA=y
# CONFIG_SCSI_DH is not setCONFIG_SCSI_OSD_INITIATOR=y
# CONFIG_SCSI_OSD_ULD is not setCONFIG_SCSI_OSD_DPRINT_SENSE=1CONFIG_SCSI_OSD_DEBUG=y
# CONFIG_ATA is not set
# CONFIG_MD is not setCONFIG_TARGET_CORE=yCONFIG_TCM_IBLOCK=yCONFIG_TCM_FILEIO=yCONFIG_TCM_PSCSI=yCONFIG_LOOPBACK_TARGET=yCONFIG_SBP_TARGET=y
#
# IEEE 1394 (FireWire) support
#CONFIG_FIREWIRE=y
# CONFIG_FIREWIRE_SBP2 is not set
# CONFIG_MACINTOSH_DRIVERS is not setCONFIG_NVM=y
# CONFIG_NVM_DEBUG is not setCONFIG_NVM_RRPC=yCONFIG_NVM_PBLK=y
#
# Input device support
#CONFIG_INPUT=y
# CONFIG_INPUT_LEDS is not setCONFIG_INPUT_FF_MEMLESS=yCONFIG_INPUT_POLLDEV=yCONFIG_INPUT_SPARSEKMAP=yCONFIG_INPUT_MATRIXKMAP=y
#
# Userland interfaces
#CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not setCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not setCONFIG_INPUT_EVBUG=y
#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=yCONFIG_KEYBOARD_ADP5520=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
# CONFIG_KEYBOARD_ATKBD is not setCONFIG_KEYBOARD_QT1070=yCONFIG_KEYBOARD_QT2160=yCONFIG_KEYBOARD_CLPS711X=y
# CONFIG_KEYBOARD_DLINK_DIR685 is not set
# CONFIG_KEYBOARD_LKKBD is not setCONFIG_KEYBOARD_GPIO=y
# CONFIG_KEYBOARD_GPIO_POLLED is not setCONFIG_KEYBOARD_TCA6416=yCONFIG_KEYBOARD_TCA8418=yCONFIG_KEYBOARD_MATRIX=yCONFIG_KEYBOARD_LM8323=y
# CONFIG_KEYBOARD_LM8333 is not setCONFIG_KEYBOARD_MAX7359=yCONFIG_KEYBOARD_MCS=y
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not setCONFIG_KEYBOARD_OPENCORES=y
# CONFIG_KEYBOARD_GOLDFISH_EVENTS is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_ST_KEYSCAN is not set
# CONFIG_KEYBOARD_SUNKBD is not setCONFIG_KEYBOARD_SH_KEYSC=y
# CONFIG_KEYBOARD_STMPE is not set
# CONFIG_KEYBOARD_OMAP4 is not setCONFIG_KEYBOARD_TM2_TOUCHKEY=y
# CONFIG_KEYBOARD_TWL4030 is not setCONFIG_KEYBOARD_XTKBD=yCONFIG_KEYBOARD_CAP11XX=y
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not setCONFIG_INPUT_TABLET=yCONFIG_TABLET_SERIAL_WACOM4=y
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not setCONFIG_RMI4_CORE=y
# CONFIG_RMI4_I2C is not setCONFIG_RMI4_SPI=yCONFIG_RMI4_SMB=yCONFIG_RMI4_F03=yCONFIG_RMI4_F03_SERIO=yCONFIG_RMI4_2D_SENSOR=yCONFIG_RMI4_F11=yCONFIG_RMI4_F12=yCONFIG_RMI4_F30=y
# CONFIG_RMI4_F34 is not setCONFIG_RMI4_F55=y
#
# Hardware I/O ports
#CONFIG_SERIO=yCONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
# CONFIG_SERIO_I8042 is not setCONFIG_SERIO_SERPORT=yCONFIG_SERIO_CT82C710=yCONFIG_SERIO_PARKBD=yCONFIG_SERIO_LIBPS2=yCONFIG_SERIO_RAW=y
# CONFIG_SERIO_ALTERA_PS2 is not setCONFIG_SERIO_PS2MULT=yCONFIG_SERIO_ARC_PS2=yCONFIG_SERIO_APBPS2=yCONFIG_SERIO_OLPC_APSP=yCONFIG_SERIO_SUN4I_PS2=y
# CONFIG_USERIO is not setCONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not setCONFIG_GAMEPORT_L4=y
#
# Character devices
#CONFIG_TTY=yCONFIG_VT=yCONFIG_CONSOLE_TRANSLATIONS=yCONFIG_VT_CONSOLE=yCONFIG_VT_CONSOLE_SLEEP=yCONFIG_HW_CONSOLE=yCONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_UNIX98_PTYS is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_TRACE_SINK is not setCONFIG_DEVMEM=y
# CONFIG_DEVKMEM is not set
#
# Serial drivers
#CONFIG_SERIAL_EARLYCON=yCONFIG_SERIAL_8250=yCONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
# CONFIG_SERIAL_8250_FINTEK is not setCONFIG_SERIAL_8250_CONSOLE=yCONFIG_SERIAL_8250_DMA=yCONFIG_SERIAL_8250_CS=yCONFIG_SERIAL_8250_NR_UARTS=4CONFIG_SERIAL_8250_RUNTIME_UARTS=4CONFIG_SERIAL_8250_EXTENDED=yCONFIG_SERIAL_8250_MANY_PORTS=yCONFIG_SERIAL_8250_ASPEED_VUART=y
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
# CONFIG_SERIAL_8250_DETECT_IRQ is not setCONFIG_SERIAL_8250_RSA=y
# CONFIG_SERIAL_8250_FSL is not set
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_RT288X is not set
# CONFIG_SERIAL_8250_LPC18XX is not set
# CONFIG_SERIAL_8250_UNIPHIER is not setCONFIG_SERIAL_OF_PLATFORM=y
#
# Non-8250 serial port support
#CONFIG_SERIAL_ATMEL=y
# CONFIG_SERIAL_ATMEL_CONSOLE is not set CONFIG_SERIAL_ATMEL_PDC=y
# CONFIG_SERIAL_ATMEL_TTYAT is not set CONFIG_SERIAL_CLPS711X=y
# CONFIG_SERIAL_CLPS711X_CONSOLE is not set CONFIG_SERIAL_MAX3100=y CONFIG_SERIAL_MAX310X=yCONFIG_SERIAL_IMX=y CONFIG_SERIAL_IMX_CONSOLE=y
# CONFIG_SERIAL_UARTLITE is not set
# CONFIG_SERIAL_SH_SCI is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_SCCNXP=y CONFIG_SERIAL_SCCNXP_CONSOLE=y CONFIG_SERIAL_SC16IS7XX_CORE=y CONFIG_SERIAL_SC16IS7XX=y CONFIG_SERIAL_SC16IS7XX_I2C=y
# CONFIG_SERIAL_SC16IS7XX_SPI is not set CONFIG_SERIAL_TIMBERDALE=y
# CONFIG_SERIAL_BCM63XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set CONFIG_SERIAL_IFX6X60=y
# CONFIG_SERIAL_MXS_AUART is not set CONFIG_SERIAL_XILINX_PS_UART=y CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y CONFIG_SERIAL_MPS2_UART_CONSOLE=y CONFIG_SERIAL_MPS2_UART=yCONFIG_SERIAL_ARC=y
# CONFIG_SERIAL_ARC_CONSOLE is not set CONFIG_SERIAL_ARC_NR_PORTS=1 CONFIG_SERIAL_FSL_LPUART=y
# CONFIG_SERIAL_FSL_LPUART_CONSOLE is not set CONFIG_SERIAL_CONEXANT_DIGICOLOR=y
# CONFIG_SERIAL_CONEXANT_DIGICOLOR_CONSOLE is not set # CONFIG_SERIAL_ST_ASC is not set CONFIG_SERIAL_MEN_Z135=y CONFIG_SERIAL_STM32=y
# CONFIG_SERIAL_STM32_CONSOLE is not set
# CONFIG_SERIAL_MVEBU_UART is not set
# CONFIG_SERIAL_OWL is not set CONFIG_SERIAL_MCTRL_GPIO=y
# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_TTY_PRINTK is not set CONFIG_PRINTER=yCONFIG_LP_CONSOLE=y
# CONFIG_PPDEV is not setCONFIG_HVC_DRIVER=yCONFIG_HVC_IRQ=yCONFIG_HVC_XEN=y
# CONFIG_HVC_XEN_FRONTEND is not set CONFIG_VIRTIO_CONSOLE=yCONFIG_IPMI_HANDLER=y CONFIG_IPMI_DMI_DECODE=y CONFIG_IPMI_PANIC_EVENT=y
# CONFIG_IPMI_PANIC_STRING is not set CONFIG_IPMI_DEVICE_INTERFACE=y CONFIG_IPMI_SI=y
# CONFIG_IPMI_SSIF is not set CONFIG_IPMI_WATCHDOG=yCONFIG_IPMI_POWEROFF=y
# CONFIG_ASPEED_BT_IPMI_BMC is not set CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_TIMERIOMEM=y CONFIG_HW_RANDOM_VIA=y CONFIG_HW_RANDOM_VIRTIO=y CONFIG_HW_RANDOM_TPM=y
# CONFIG_HW_RANDOM_STM32 is not set CONFIG_HW_RANDOM_MESON=y CONFIG_HW_RANDOM_MTK=y
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not setCONFIG_CARDMAN_4040=yCONFIG_SCR24X=yCONFIG_MWAVE=yCONFIG_RAW_DRIVER=yCONFIG_MAX_RAW_DEVS=256CONFIG_HANGCHECK_TIMER=yCONFIG_TCG_TPM=yCONFIG_TCG_TIS_CORE=yCONFIG_TCG_TIS=yCONFIG_TCG_TIS_SPI=yCONFIG_TCG_TIS_I2C_ATMEL=y
# CONFIG_TCG_TIS_I2C_INFINEON is not setCONFIG_TCG_TIS_I2C_NUVOTON=y
# CONFIG_TCG_NSC is not setCONFIG_TCG_ATMEL=y
# CONFIG_TCG_XEN is not set
# CONFIG_TCG_VTPM_PROXY is not setCONFIG_TCG_TIS_ST33ZP24=yCONFIG_TCG_TIS_ST33ZP24_I2C=y
# CONFIG_TCG_TIS_ST33ZP24_SPI is not set
# CONFIG_TELCLOCK is not setCONFIG_XILLYBUS=y
# CONFIG_XILLYBUS_OF is not set
#
# I2C support
#CONFIG_I2C=yCONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
# CONFIG_I2C_CHARDEV is not setCONFIG_I2C_MUX=y
#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_ARB_GPIO_CHALLENGE is not setCONFIG_I2C_MUX_GPIO=yCONFIG_I2C_MUX_GPMUX=yCONFIG_I2C_MUX_LTC4306=yCONFIG_I2C_MUX_PCA9541=y
# CONFIG_I2C_MUX_PCA954x is not setCONFIG_I2C_MUX_REG=y
# CONFIG_I2C_MUX_MLXCPLD is not set
# CONFIG_I2C_HELPER_AUTO is not setCONFIG_I2C_SMBUS=y
#
# I2C Algorithms
#CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
#
# CONFIG_I2C_HIX5HD2 is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip) #CONFIG_I2C_ASPEED=yCONFIG_I2C_AXXIA=yCONFIG_I2C_BCM_IPROC=yCONFIG_I2C_BRCMSTB=y
# CONFIG_I2C_CBUS_GPIO is not set CONFIG_I2C_DESIGNWARE_CORE=y CONFIG_I2C_DESIGNWARE_PLATFORM=y
# CONFIG_I2C_DESIGNWARE_SLAVE is not set
# CONFIG_I2C_EFM32 is not setCONFIG_I2C_GPIO=yCONFIG_I2C_IMG=yCONFIG_I2C_IMX_LPI2C=yCONFIG_I2C_JZ4780=y
# CONFIG_I2C_KEMPLD is not setCONFIG_I2C_LPC2K=y
# CONFIG_I2C_MESON is not setCONFIG_I2C_MT65XX=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not setCONFIG_I2C_RIIC=yCONFIG_I2C_SH_MOBILE=y
# CONFIG_I2C_SIMTEC is not set CONFIG_I2C_STM32F4=yCONFIG_I2C_SUN6I_P2WI=yCONFIG_I2C_UNIPHIER=y
# CONFIG_I2C_UNIPHIER_F is not set
# CONFIG_I2C_VERSATILE is not set CONFIG_I2C_XILINX=yCONFIG_I2C_XLP9XX=yCONFIG_I2C_RCAR=y
#
# External I2C/SMBus adapter drivers
#CONFIG_I2C_PARPORT=yCONFIG_I2C_PARPORT_LIGHT=yCONFIG_I2C_TAOS_EVM=y
#
# Other I2C/SMBus bus drivers
#CONFIG_I2C_MLXCPLD=yCONFIG_I2C_SLAVE=yCONFIG_I2C_SLAVE_EEPROM=y
# CONFIG_I2C_DEBUG_CORE is not setCONFIG_I2C_DEBUG_ALGO=y
# CONFIG_I2C_DEBUG_BUS is not setCONFIG_SPI=y
# CONFIG_SPI_DEBUG is not setCONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#CONFIG_SPI_ALTERA=yCONFIG_SPI_ARMADA_3700=yCONFIG_SPI_ATMEL=yCONFIG_SPI_AXI_SPI_ENGINE=yCONFIG_SPI_BCM2835=yCONFIG_SPI_BCM2835AUX=yCONFIG_SPI_BCM63XX=yCONFIG_SPI_BCM63XX_HSSPI=y
# CONFIG_SPI_BCM_QSPI is not setCONFIG_SPI_BITBANG=y
# CONFIG_SPI_BUTTERFLY is not setCONFIG_SPI_CADENCE=yCONFIG_SPI_CLPS711X=yCONFIG_SPI_DESIGNWARE=yCONFIG_SPI_DW_MMIO=yCONFIG_SPI_EP93XX=y
# CONFIG_SPI_FSL_LPSPI is not setCONFIG_SPI_GPIO=y
# CONFIG_SPI_IMG_SPFI is not setCONFIG_SPI_IMX=yCONFIG_SPI_JCORE=yCONFIG_SPI_LM70_LLP=yCONFIG_SPI_LP8841_RTC=yCONFIG_SPI_FSL_LIB=yCONFIG_SPI_FSL_SPI=y
# CONFIG_SPI_FSL_DSPI is not setCONFIG_SPI_MESON_SPICC=y
# CONFIG_SPI_MESON_SPIFC is not set
# CONFIG_SPI_MT65XX is not setCONFIG_SPI_LANTIQ_SSC=yCONFIG_SPI_OC_TINY=y
# CONFIG_SPI_OMAP24XX is not setCONFIG_SPI_TI_QSPI=yCONFIG_SPI_OMAP_100K=y
# CONFIG_SPI_ORION is not setCONFIG_SPI_PIC32=yCONFIG_SPI_PIC32_SQI=y
# CONFIG_SPI_PXA2XX_PCI is not set
# CONFIG_SPI_ROCKCHIP is not setCONFIG_SPI_RSPI=yCONFIG_SPI_S3C64XX=yCONFIG_SPI_SC18IS602=yCONFIG_SPI_SH=yCONFIG_SPI_SH_HSPI=yCONFIG_SPI_STM32=yCONFIG_SPI_ST_SSC4=yCONFIG_SPI_SUN4I=yCONFIG_SPI_SUN6I=yCONFIG_SPI_TEGRA114=y
# CONFIG_SPI_TEGRA20_SFLASH is not setCONFIG_SPI_TEGRA20_SLINK=y
# CONFIG_SPI_TXX9 is not setCONFIG_SPI_XCOMM=yCONFIG_SPI_XILINX=yCONFIG_SPI_XLP=yCONFIG_SPI_XTENSA_XTFPGA=yCONFIG_SPI_ZYNQMP_GQSPI=y
#
# SPI Protocol Masters
#CONFIG_SPI_SPIDEV=yCONFIG_SPI_TLE62X0=y
# CONFIG_SPI_SLAVE is not setCONFIG_SPMI=yCONFIG_SPMI_MSM_PMIC_ARB=y
# CONFIG_HSI is not set
# CONFIG_PPS is not set
#
# PTP clock support
#
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. #CONFIG_GPIOLIB=yCONFIG_OF_GPIO=yCONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not setCONFIG_GPIO_SYSFS=yCONFIG_GPIO_GENERIC=yCONFIG_GPIO_MAX730X=y
#
# Memory mapped GPIO drivers
#
# CONFIG_GPIO_74XX_MMIO is not set
# CONFIG_GPIO_ALTERA is not setCONFIG_GPIO_ASPEED=yCONFIG_GPIO_ATH79=y
# CONFIG_GPIO_AXP209 is not setCONFIG_GPIO_BCM_KONA=yCONFIG_GPIO_BRCMSTB=yCONFIG_GPIO_CLPS711X=yCONFIG_GPIO_DWAPB=y
# CONFIG_GPIO_EM is not set
# CONFIG_GPIO_ETRAXFS is not set
# CONFIG_GPIO_FTGPIO010 is not setCONFIG_GPIO_GENERIC_PLATFORM=yCONFIG_GPIO_GRGPIO=yCONFIG_GPIO_INGENIC=y
# CONFIG_GPIO_IOP is not setCONFIG_GPIO_LPC18XX=yCONFIG_GPIO_MB86S7X=y
# CONFIG_GPIO_MENZ127 is not setCONFIG_GPIO_MOCKUP=yCONFIG_GPIO_MPC8XXX=yCONFIG_GPIO_RCAR=yCONFIG_GPIO_SYSCON=y
# CONFIG_GPIO_TEGRA is not setCONFIG_GPIO_TS4800=yCONFIG_GPIO_XILINX=yCONFIG_GPIO_XLP=y
# CONFIG_GPIO_ZX is not set
#
# Port-mapped I/O GPIO drivers
#CONFIG_GPIO_F7188X=y
# CONFIG_GPIO_IT87 is not set
# CONFIG_GPIO_SCH311X is not setCONFIG_GPIO_TS5500=yCONFIG_GPIO_WS16C48=y
#
# I2C GPIO expanders
#
# CONFIG_GPIO_ADP5588 is not setCONFIG_GPIO_ADNP=yCONFIG_GPIO_MAX7300=yCONFIG_GPIO_MAX732X=yCONFIG_GPIO_MAX732X_IRQ=y
# CONFIG_GPIO_PCA953X is not setCONFIG_GPIO_PCF857X=y
# CONFIG_GPIO_TPIC2810 is not setCONFIG_GPIO_TS4900=y
#
# MFD GPIO expanders
#CONFIG_GPIO_ADP5520=yCONFIG_GPIO_ARIZONA=yCONFIG_GPIO_DA9052=yCONFIG_GPIO_KEMPLD=yCONFIG_GPIO_LP3943=y
# CONFIG_GPIO_LP87565 is not set
# CONFIG_GPIO_RC5T583 is not setCONFIG_GPIO_STMPE=y
# CONFIG_GPIO_TPS65910 is not setCONFIG_GPIO_TPS65912=yCONFIG_GPIO_TWL4030=yCONFIG_GPIO_WM831X=yCONFIG_GPIO_WM8350=y
# CONFIG_GPIO_WM8994 is not set
#
# SPI GPIO expanders
#CONFIG_GPIO_74X164=yCONFIG_GPIO_MAX7301=yCONFIG_GPIO_MC33880=y
# CONFIG_GPIO_PISOSR is not set
# CONFIG_GPIO_XRA1403 is not setCONFIG_W1=y
#
# 1-wire Bus Masters
#CONFIG_W1_MASTER_DS2482=y
# CONFIG_W1_MASTER_MXC is not set
# CONFIG_W1_MASTER_DS1WM is not set
# CONFIG_W1_MASTER_GPIO is not set
#
# 1-wire Slaves
#CONFIG_W1_SLAVE_THERM=yCONFIG_W1_SLAVE_SMEM=yCONFIG_W1_SLAVE_DS2405=y
# CONFIG_W1_SLAVE_DS2408 is not setCONFIG_W1_SLAVE_DS2413=yCONFIG_W1_SLAVE_DS2406=yCONFIG_W1_SLAVE_DS2423=yCONFIG_W1_SLAVE_DS2431=yCONFIG_W1_SLAVE_DS2433=y
# CONFIG_W1_SLAVE_DS2433_CRC is not set
# CONFIG_W1_SLAVE_DS2438 is not set
# CONFIG_W1_SLAVE_DS2760 is not setCONFIG_W1_SLAVE_DS2780=yCONFIG_W1_SLAVE_DS2781=y
# CONFIG_W1_SLAVE_DS28E04 is not set
# CONFIG_W1_SLAVE_BQ27000 is not set
# CONFIG_POWER_AVS is not set
# CONFIG_POWER_RESET is not setCONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not setCONFIG_PDA_POWER=yCONFIG_MAX8925_POWER=yCONFIG_WM831X_BACKUP=yCONFIG_WM831X_POWER=yCONFIG_WM8350_POWER=y
# CONFIG_TEST_POWER is not setCONFIG_BATTERY_ACT8945A=yCONFIG_BATTERY_DS2780=yCONFIG_BATTERY_DS2781=yCONFIG_BATTERY_DS2782=yCONFIG_BATTERY_SBS=yCONFIG_CHARGER_SBS=yCONFIG_BATTERY_BQ27XXX=y
# CONFIG_BATTERY_BQ27XXX_I2C is not setCONFIG_BATTERY_DA9052=y
# CONFIG_BATTERY_DA9150 is not set
# CONFIG_BATTERY_MAX17040 is not setCONFIG_BATTERY_MAX17042=yCONFIG_CHARGER_MAX8903=yCONFIG_CHARGER_LP8727=y
# CONFIG_CHARGER_GPIO is not setCONFIG_CHARGER_MANAGER=yCONFIG_CHARGER_LTC3651=y
# CONFIG_CHARGER_MAX14577 is not set
# CONFIG_CHARGER_DETECTOR_MAX14656 is not set
# CONFIG_CHARGER_MAX8997 is not setCONFIG_CHARGER_MAX8998=yCONFIG_CHARGER_QCOM_SMBB=y
# CONFIG_CHARGER_BQ2415X is not setCONFIG_CHARGER_BQ24190=y
# CONFIG_CHARGER_BQ24257 is not setCONFIG_CHARGER_BQ24735=y
# CONFIG_CHARGER_BQ25890 is not setCONFIG_CHARGER_SMB347=yCONFIG_CHARGER_TPS65090=yCONFIG_BATTERY_GAUGE_LTC2941=yCONFIG_BATTERY_GOLDFISH=yCONFIG_CHARGER_RT9455=yCONFIG_HWMON=yCONFIG_HWMON_VID=y
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#CONFIG_SENSORS_ABITUGURU=y CONFIG_SENSORS_ABITUGURU3=y
# CONFIG_SENSORS_AD7314 is not set CONFIG_SENSORS_AD7414=y CONFIG_SENSORS_AD7418=y CONFIG_SENSORS_ADM1021=y
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set CONFIG_SENSORS_ADM1029=y
# CONFIG_SENSORS_ADM1031 is not set CONFIG_SENSORS_ADM9240=y CONFIG_SENSORS_ADT7X10=y
# CONFIG_SENSORS_ADT7310 is not set CONFIG_SENSORS_ADT7410=y CONFIG_SENSORS_ADT7411=y
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_SENSORS_ARM_SCPI is not set CONFIG_SENSORS_ASB100=y
# CONFIG_SENSORS_ASPEED is not set CONFIG_SENSORS_ATXP1=yCONFIG_SENSORS_DS620=yCONFIG_SENSORS_DS1621=y
# CONFIG_SENSORS_DELL_SMM is not set CONFIG_SENSORS_DA9052_ADC=y CONFIG_SENSORS_F71805F=y
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_MC13783_ADC is not set CONFIG_SENSORS_FSCHMD=y
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set CONFIG_SENSORS_G760A=y
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_GPIO_FAN is not set CONFIG_SENSORS_HIH6130=y
# CONFIG_SENSORS_IBMAEM is not set CONFIG_SENSORS_IBMPEX=y CONFIG_SENSORS_CORETEMP=y
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_JC42 is not set CONFIG_SENSORS_POWR1220=y CONFIG_SENSORS_LINEAGE=y CONFIG_SENSORS_LTC2945=y CONFIG_SENSORS_LTC2990=y CONFIG_SENSORS_LTC4151=y CONFIG_SENSORS_LTC4215=y CONFIG_SENSORS_LTC4222=y CONFIG_SENSORS_LTC4245=y
# CONFIG_SENSORS_LTC4260 is not set
# CONFIG_SENSORS_LTC4261 is not set CONFIG_SENSORS_MAX1111=y
# CONFIG_SENSORS_MAX16065 is not set CONFIG_SENSORS_MAX1619=y CONFIG_SENSORS_MAX1668=y CONFIG_SENSORS_MAX197=y CONFIG_SENSORS_MAX31722=y CONFIG_SENSORS_MAX6639=y
# CONFIG_SENSORS_MAX6642 is not set CONFIG_SENSORS_MAX6650=y CONFIG_SENSORS_MAX6697=y CONFIG_SENSORS_MAX31790=y CONFIG_SENSORS_MCP3021=y CONFIG_SENSORS_TC654=yCONFIG_SENSORS_ADCXX=y
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set CONFIG_SENSORS_LM73=y
# CONFIG_SENSORS_LM75 is not set CONFIG_SENSORS_LM77=yCONFIG_SENSORS_LM78=yCONFIG_SENSORS_LM80=yCONFIG_SENSORS_LM83=yCONFIG_SENSORS_LM85=yCONFIG_SENSORS_LM87=yCONFIG_SENSORS_LM90=yCONFIG_SENSORS_LM92=y
# CONFIG_SENSORS_LM93 is not set CONFIG_SENSORS_LM95234=y CONFIG_SENSORS_LM95241=y
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set CONFIG_SENSORS_NTC_THERMISTOR=y CONFIG_SENSORS_NCT6683=y CONFIG_SENSORS_NCT6775=y
# CONFIG_SENSORS_NCT7802 is not set CONFIG_SENSORS_NCT7904=y CONFIG_SENSORS_NSA320=y
# CONFIG_SENSORS_PCF8591 is not set CONFIG_PMBUS=yCONFIG_SENSORS_PMBUS=y CONFIG_SENSORS_ADM1275=y
# CONFIG_SENSORS_IR35221 is not set
# CONFIG_SENSORS_LM25066 is not set CONFIG_SENSORS_LTC2978=y
# CONFIG_SENSORS_LTC2978_REGULATOR is not set CONFIG_SENSORS_LTC3815=y
# CONFIG_SENSORS_MAX16064 is not set CONFIG_SENSORS_MAX20751=y CONFIG_SENSORS_MAX34440=y CONFIG_SENSORS_MAX8688=y CONFIG_SENSORS_TPS40422=y
# CONFIG_SENSORS_UCD9000 is not set CONFIG_SENSORS_UCD9200=y CONFIG_SENSORS_ZL6100=y
# CONFIG_SENSORS_PWM_FAN is not set CONFIG_SENSORS_SHT15=yCONFIG_SENSORS_SHT21=y
# CONFIG_SENSORS_SHT3x is not set CONFIG_SENSORS_SHTC1=y
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set CONFIG_SENSORS_EMC6W201=y CONFIG_SENSORS_SMSC47M1=y CONFIG_SENSORS_SMSC47M192=y CONFIG_SENSORS_SMSC47B397=y
# CONFIG_SENSORS_SCH56XX_COMMON is not set
# CONFIG_SENSORS_STTS751 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set CONFIG_SENSORS_ADS1015=y CONFIG_SENSORS_ADS7828=y
# CONFIG_SENSORS_ADS7871 is not set
# CONFIG_SENSORS_AMC6821 is not set CONFIG_SENSORS_INA209=y
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_INA3221 is not set CONFIG_SENSORS_TC74=y
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set CONFIG_SENSORS_TMP103=y
# CONFIG_SENSORS_TMP108 is not set
# CONFIG_SENSORS_TMP401 is not set CONFIG_SENSORS_TMP421=y
# CONFIG_SENSORS_VIA_CPUTEMP is not set CONFIG_SENSORS_VT1211=y
# CONFIG_SENSORS_W83781D is not set CONFIG_SENSORS_W83791D=y
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set CONFIG_SENSORS_W83795=y CONFIG_SENSORS_W83795_FANCTRL=y CONFIG_SENSORS_W83L785TS=y
# CONFIG_SENSORS_W83L786NG is not set CONFIG_SENSORS_W83627HF=y CONFIG_SENSORS_W83627EHF=y
# CONFIG_SENSORS_WM831X is not set
# CONFIG_SENSORS_WM8350 is not set CONFIG_THERMAL=y CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
# CONFIG_THERMAL_HWMON is not set
# CONFIG_THERMAL_OF is not set CONFIG_THERMAL_WRITABLE_TRIPS=y CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set # CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set # CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set CONFIG_THERMAL_GOV_FAIR_SHARE=y CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_BANG_BANG is not set CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set CONFIG_DEVFREQ_THERMAL=y
# CONFIG_THERMAL_EMULATION is not set
# CONFIG_HISI_THERMAL is not set CONFIG_IMX_THERMAL=y
# CONFIG_SPEAR_THERMAL is not set
# CONFIG_ROCKCHIP_THERMAL is not set CONFIG_RCAR_THERMAL=y
# CONFIG_RCAR_GEN3_THERMAL is not set CONFIG_KIRKWOOD_THERMAL=y CONFIG_DOVE_THERMAL=yCONFIG_ARMADA_THERMAL=y CONFIG_DA9062_THERMAL=y CONFIG_INTEL_SOC_DTS_IOSF_CORE=y CONFIG_INTEL_SOC_DTS_THERMAL=y
#
# ACPI INT340X thermal drivers
#
# CONFIG_MTK_THERMAL is not set
#
# Broadcom thermal drivers
#CONFIG_BCM_NS_THERMAL=y
#
# Texas Instruments thermal drivers
#CONFIG_TI_SOC_THERMAL=y
# CONFIG_TI_THERMAL is not setCONFIG_OMAP3_THERMAL=yCONFIG_OMAP4_THERMAL=y
# CONFIG_OMAP5_THERMAL is not set
# CONFIG_DRA752_THERMAL is not set
#
# Samsung thermal drivers
#CONFIG_TANGO_THERMAL=y
#
# Qualcomm thermal drivers
#
# CONFIG_QCOM_TSENS is not setCONFIG_ZX2967_THERMAL=y
# CONFIG_WATCHDOG is not setCONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#CONFIG_SSB=yCONFIG_SSB_PCMCIAHOST_POSSIBLE=y
# CONFIG_SSB_PCMCIAHOST is not set
# CONFIG_SSB_SILENT is not set
# CONFIG_SSB_DEBUG is not set
# CONFIG_SSB_DRIVER_GPIO is not setCONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#CONFIG_BCMA=y
# CONFIG_BCMA_HOST_SOC is not setCONFIG_BCMA_DRIVER_GMAC_CMN=yCONFIG_BCMA_DRIVER_GPIO=yCONFIG_BCMA_DEBUG=y
#
# Multifunction device drivers
#CONFIG_MFD_CORE=y
# CONFIG_MFD_ACT8945A is not setCONFIG_MFD_SUN4I_GPADC=y
# CONFIG_MFD_AS3711 is not setCONFIG_MFD_AS3722=yCONFIG_PMIC_ADP5520=yCONFIG_MFD_AAT2870_CORE=yCONFIG_MFD_ATMEL_FLEXCOM=yCONFIG_MFD_ATMEL_HLCDC=y
# CONFIG_MFD_BCM590XX is not setCONFIG_MFD_AXP20X=yCONFIG_MFD_AXP20X_I2C=y
# CONFIG_MFD_CROS_EC is not set
# CONFIG_PMIC_DA903X is not setCONFIG_PMIC_DA9052=yCONFIG_MFD_DA9052_SPI=y
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not setCONFIG_MFD_DA9063=yCONFIG_MFD_DA9150=yCONFIG_MFD_EXYNOS_LPASS=yCONFIG_MFD_MC13XXX=yCONFIG_MFD_MC13XXX_SPI=y
# CONFIG_MFD_MC13XXX_I2C is not setCONFIG_MFD_MXS_LRADC=yCONFIG_MFD_MX25_TSADC=yCONFIG_MFD_HI6421_PMIC=yCONFIG_MFD_HI655X_PMIC=y
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not setCONFIG_MFD_KEMPLD=yCONFIG_MFD_88PM800=yCONFIG_MFD_88PM805=y
# CONFIG_MFD_88PM860X is not setCONFIG_MFD_MAX14577=y
# CONFIG_MFD_MAX77620 is not setCONFIG_MFD_MAX77686=y
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77843 is not setCONFIG_MFD_MAX8907=yCONFIG_MFD_MAX8925=yCONFIG_MFD_MAX8997=yCONFIG_MFD_MAX8998=y
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not setCONFIG_EZX_PCAP=y
# CONFIG_MFD_CPCAP is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not setCONFIG_MFD_SPMI_PMIC=y
# CONFIG_MFD_RT5033 is not setCONFIG_MFD_RC5T583=yCONFIG_MFD_RK808=yCONFIG_MFD_RN5T618=yCONFIG_MFD_SEC_CORE=yCONFIG_MFD_SI476X_CORE=yCONFIG_MFD_SM501=yCONFIG_MFD_SM501_GPIO=yCONFIG_MFD_SKY81452=y
# CONFIG_MFD_SMSC is not setCONFIG_ABX500_CORE=y
# CONFIG_AB3100_CORE is not setCONFIG_MFD_STMPE=y
#
# STMicroelectronics STMPE Interface Drivers
#CONFIG_STMPE_I2C=y
# CONFIG_STMPE_SPI is not setCONFIG_MFD_SYSCON=yCONFIG_MFD_TI_AM335X_TSCADC=yCONFIG_MFD_LP3943=yCONFIG_MFD_LP8788=yCONFIG_MFD_TI_LMU=y
# CONFIG_MFD_PALMAS is not setCONFIG_TPS6105X=yCONFIG_TPS65010=yCONFIG_TPS6507X=y
# CONFIG_MFD_TPS65086 is not setCONFIG_MFD_TPS65090=y
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TI_LP873X is not setCONFIG_MFD_TI_LP87565=y
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_TPS6586X is not setCONFIG_MFD_TPS65910=yCONFIG_MFD_TPS65912=yCONFIG_MFD_TPS65912_I2C=yCONFIG_MFD_TPS65912_SPI=yCONFIG_MFD_TPS80031=yCONFIG_TWL4030_CORE=y
# CONFIG_MFD_TWL4030_AUDIO is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not setCONFIG_MFD_LM3533=y
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not setCONFIG_MFD_ARIZONA=yCONFIG_MFD_ARIZONA_I2C=y
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_CS47L24 is not setCONFIG_MFD_WM5102=y
# CONFIG_MFD_WM5110 is not set
# CONFIG_MFD_WM8997 is not set
# CONFIG_MFD_WM8998 is not set
# CONFIG_MFD_WM8400 is not setCONFIG_MFD_WM831X=y
# CONFIG_MFD_WM831X_I2C is not setCONFIG_MFD_WM831X_SPI=yCONFIG_MFD_WM8350=yCONFIG_MFD_WM8350_I2C=yCONFIG_MFD_WM8994=yCONFIG_MFD_STW481X=y
# CONFIG_MFD_STM32_TIMERS is not setCONFIG_REGULATOR=yCONFIG_REGULATOR_DEBUG=yCONFIG_REGULATOR_FIXED_VOLTAGE=yCONFIG_REGULATOR_VIRTUAL_CONSUMER=y
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not setCONFIG_REGULATOR_88PM800=yCONFIG_REGULATOR_ACT8865=y
# CONFIG_REGULATOR_AD5398 is not setCONFIG_REGULATOR_ANATOP=y
# CONFIG_REGULATOR_AAT2870 is not setCONFIG_REGULATOR_AS3722=yCONFIG_REGULATOR_AXP20X=yCONFIG_REGULATOR_DA9052=yCONFIG_REGULATOR_DA9063=yCONFIG_REGULATOR_DA9210=y
# CONFIG_REGULATOR_DA9211 is not set
# CONFIG_REGULATOR_FAN53555 is not set
# CONFIG_REGULATOR_GPIO is not setCONFIG_REGULATOR_HI6421=yCONFIG_REGULATOR_HI6421V530=yCONFIG_REGULATOR_HI655X=y
# CONFIG_REGULATOR_ISL9305 is not set
# CONFIG_REGULATOR_ISL6271A is not setCONFIG_REGULATOR_LM363X=yCONFIG_REGULATOR_LP3971=yCONFIG_REGULATOR_LP3972=y
# CONFIG_REGULATOR_LP872X is not setCONFIG_REGULATOR_LP8755=yCONFIG_REGULATOR_LP87565=yCONFIG_REGULATOR_LP8788=yCONFIG_REGULATOR_LTC3589=yCONFIG_REGULATOR_LTC3676=yCONFIG_REGULATOR_MAX14577=yCONFIG_REGULATOR_MAX1586=yCONFIG_REGULATOR_MAX8649=yCONFIG_REGULATOR_MAX8660=y
# CONFIG_REGULATOR_MAX8907 is not setCONFIG_REGULATOR_MAX8925=yCONFIG_REGULATOR_MAX8952=yCONFIG_REGULATOR_MAX8997=yCONFIG_REGULATOR_MAX8998=y
# CONFIG_REGULATOR_MAX77686 is not setCONFIG_REGULATOR_MAX77802=yCONFIG_REGULATOR_MC13XXX_CORE=yCONFIG_REGULATOR_MC13783=yCONFIG_REGULATOR_MC13892=yCONFIG_REGULATOR_MT6311=yCONFIG_REGULATOR_PBIAS=y
# CONFIG_REGULATOR_PCAP is not setCONFIG_REGULATOR_PFUZE100=yCONFIG_REGULATOR_PV88060=yCONFIG_REGULATOR_PV88080=yCONFIG_REGULATOR_PV88090=y
# CONFIG_REGULATOR_PWM is not setCONFIG_REGULATOR_QCOM_SPMI=yCONFIG_REGULATOR_RC5T583=y
# CONFIG_REGULATOR_RK808 is not setCONFIG_REGULATOR_RN5T618=yCONFIG_REGULATOR_S2MPA01=yCONFIG_REGULATOR_S2MPS11=yCONFIG_REGULATOR_S5M8767=yCONFIG_REGULATOR_SKY81452=y
# CONFIG_REGULATOR_STW481X_VMMC is not setCONFIG_REGULATOR_TPS51632=yCONFIG_REGULATOR_TPS6105X=yCONFIG_REGULATOR_TPS62360=y
# CONFIG_REGULATOR_TPS65023 is not setCONFIG_REGULATOR_TPS6507X=yCONFIG_REGULATOR_TPS65090=y
# CONFIG_REGULATOR_TPS65132 is not set
# CONFIG_REGULATOR_TPS6524X is not set
# CONFIG_REGULATOR_TPS65910 is not setCONFIG_REGULATOR_TPS65912=yCONFIG_REGULATOR_TPS80031=y
# CONFIG_REGULATOR_TWL4030 is not setCONFIG_REGULATOR_VCTRL=yCONFIG_REGULATOR_WM831X=yCONFIG_REGULATOR_WM8350=yCONFIG_REGULATOR_WM8994=yCONFIG_MEDIA_SUPPORT=y
#
# Multimedia core support
#
# CONFIG_MEDIA_CAMERA_SUPPORT is not set
# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not setCONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
# CONFIG_MEDIA_RADIO_SUPPORT is not set
# CONFIG_MEDIA_SDR_SUPPORT is not set
# CONFIG_MEDIA_RC_SUPPORT is not set
# CONFIG_MEDIA_CEC_SUPPORT is not set
# CONFIG_MEDIA_CONTROLLER is not set
# CONFIG_VIDEO_ADV_DEBUG is not setCONFIG_VIDEO_FIXED_MINOR_RANGES=yCONFIG_DVB_CORE=y
# CONFIG_TTPCI_EEPROM is not setCONFIG_DVB_MAX_ADAPTERS=16CONFIG_DVB_DYNAMIC_MINORS=y
# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set
#
# Media drivers
#
# CONFIG_DVB_PLATFORM_DRIVERS is not set
#
# Supported MMC/SDIO adapters
#
#
# Supported FireWire (IEEE 1394) Adapters
#CONFIG_DVB_FIREDTV=yCONFIG_DVB_FIREDTV_INPUT=y
#
# Media ancillary drivers (tuners, sensors, i2c, spi, frontends) #
# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set CONFIG_MEDIA_TUNER=y
#
# Customize TV tuners
#CONFIG_MEDIA_TUNER_SIMPLE=y
# CONFIG_MEDIA_TUNER_TDA8290 is not set
# CONFIG_MEDIA_TUNER_TDA827X is not set
# CONFIG_MEDIA_TUNER_TDA18271 is not setCONFIG_MEDIA_TUNER_TDA9887=yCONFIG_MEDIA_TUNER_TEA5761=y
# CONFIG_MEDIA_TUNER_TEA5767 is not set
# CONFIG_MEDIA_TUNER_MT20XX is not setCONFIG_MEDIA_TUNER_MT2060=yCONFIG_MEDIA_TUNER_MT2063=yCONFIG_MEDIA_TUNER_MT2266=y
# CONFIG_MEDIA_TUNER_MT2131 is not setCONFIG_MEDIA_TUNER_QT1010=yCONFIG_MEDIA_TUNER_XC2028=y
# CONFIG_MEDIA_TUNER_XC5000 is not setCONFIG_MEDIA_TUNER_XC4000=yCONFIG_MEDIA_TUNER_MXL5005S=y
# CONFIG_MEDIA_TUNER_MXL5007T is not setCONFIG_MEDIA_TUNER_MC44S803=yCONFIG_MEDIA_TUNER_MAX2165=yCONFIG_MEDIA_TUNER_TDA18218=y
# CONFIG_MEDIA_TUNER_FC0011 is not setCONFIG_MEDIA_TUNER_FC0012=y
# CONFIG_MEDIA_TUNER_FC0013 is not set
# CONFIG_MEDIA_TUNER_TDA18212 is not set
# CONFIG_MEDIA_TUNER_E4000 is not set
# CONFIG_MEDIA_TUNER_FC2580 is not set
# CONFIG_MEDIA_TUNER_M88RS6000T is not setCONFIG_MEDIA_TUNER_TUA9001=y
# CONFIG_MEDIA_TUNER_SI2157 is not setCONFIG_MEDIA_TUNER_IT913X=yCONFIG_MEDIA_TUNER_R820T=y
# CONFIG_MEDIA_TUNER_MXL301RF is not setCONFIG_MEDIA_TUNER_QM1D1C0042=y
#
# Customise DVB Frontends
#
#
# Multistandard (satellite) frontends
#
# CONFIG_DVB_STB0899 is not set
# CONFIG_DVB_STB6100 is not set
CONFIG_DVB_STV090x=y
CONFIG_DVB_STV6110x=y
# CONFIG_DVB_M88DS3103 is not set
#
# Multistandard (cable + terrestrial) frontends
#
# CONFIG_DVB_DRXK is not setCONFIG_DVB_TDA18271C2DD=yCONFIG_DVB_SI2165=yCONFIG_DVB_MN88472=yCONFIG_DVB_MN88473=y
#
# DVB-S (satellite) frontends
#CONFIG_DVB_CX24110=y
# CONFIG_DVB_CX24123 is not setCONFIG_DVB_MT312=yCONFIG_DVB_ZL10036=y
# CONFIG_DVB_ZL10039 is not setCONFIG_DVB_S5H1420=yCONFIG_DVB_STV0288=yCONFIG_DVB_STB6000=yCONFIG_DVB_STV0299=y
# CONFIG_DVB_STV6110 is not setCONFIG_DVB_STV0900=y
# CONFIG_DVB_TDA8083 is not setCONFIG_DVB_TDA10086=y
# CONFIG_DVB_TDA8261 is not setCONFIG_DVB_VES1X93=y
# CONFIG_DVB_TUNER_ITD1000 is not setCONFIG_DVB_TUNER_CX24113=yCONFIG_DVB_TDA826X=y
# CONFIG_DVB_TUA6100 is not set
# CONFIG_DVB_CX24116 is not set
# CONFIG_DVB_CX24117 is not setCONFIG_DVB_CX24120=yCONFIG_DVB_SI21XX=y
# CONFIG_DVB_TS2020 is not setCONFIG_DVB_DS3000=yCONFIG_DVB_MB86A16=yCONFIG_DVB_TDA10071=y
#
# DVB-T (terrestrial) frontends
#
# CONFIG_DVB_SP8870 is not set
# CONFIG_DVB_SP887X is not setCONFIG_DVB_CX22700=yCONFIG_DVB_CX22702=yCONFIG_DVB_S5H1432=yCONFIG_DVB_DRXD=y
# CONFIG_DVB_L64781 is not set
# CONFIG_DVB_TDA1004X is not set
# CONFIG_DVB_NXT6000 is not setCONFIG_DVB_MT352=yCONFIG_DVB_ZL10353=yCONFIG_DVB_DIB3000MB=yCONFIG_DVB_DIB3000MC=yCONFIG_DVB_DIB7000M=yCONFIG_DVB_DIB7000P=yCONFIG_DVB_DIB9000=y
# CONFIG_DVB_TDA10048 is not set
# CONFIG_DVB_AF9013 is not setCONFIG_DVB_EC100=yCONFIG_DVB_STV0367=yCONFIG_DVB_CXD2820R=yCONFIG_DVB_CXD2841ER=y
# CONFIG_DVB_RTL2830 is not setCONFIG_DVB_RTL2832=yCONFIG_DVB_SI2168=y
# CONFIG_DVB_AS102_FE is not setCONFIG_DVB_ZD1301_DEMOD=y
# CONFIG_DVB_GP8PSK_FE is not set
#
# DVB-C (cable) frontends
#CONFIG_DVB_VES1820=y
# CONFIG_DVB_TDA10021 is not setCONFIG_DVB_TDA10023=y
# CONFIG_DVB_STV0297 is not set
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends #CONFIG_DVB_NXT200X=y
# CONFIG_DVB_OR51211 is not setCONFIG_DVB_OR51132=yCONFIG_DVB_BCM3510=y
# CONFIG_DVB_LGDT330X is not set CONFIG_DVB_LGDT3305=y
# CONFIG_DVB_LGDT3306A is not set CONFIG_DVB_LG2160=yCONFIG_DVB_S5H1409=y
# CONFIG_DVB_AU8522_DTV is not set CONFIG_DVB_S5H1411=y
#
# ISDB-T (terrestrial) frontends
#
# CONFIG_DVB_S921 is not setCONFIG_DVB_DIB8000=yCONFIG_DVB_MB86A20S=y
#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends #
# CONFIG_DVB_TC90522 is not set
#
# Digital terrestrial only tuners/PLL
#CONFIG_DVB_PLL=y
# CONFIG_DVB_TUNER_DIB0070 is not set
# CONFIG_DVB_TUNER_DIB0090 is not set
#
# SEC control devices for DVB-S
#CONFIG_DVB_DRX39XYJ=yCONFIG_DVB_LNBH25=y
# CONFIG_DVB_LNBP21 is not setCONFIG_DVB_LNBP22=yCONFIG_DVB_ISL6405=y
# CONFIG_DVB_ISL6421 is not set
# CONFIG_DVB_ISL6423 is not setCONFIG_DVB_A8293=y
# CONFIG_DVB_SP2 is not setCONFIG_DVB_LGS8GL5=y
# CONFIG_DVB_LGS8GXX is not setCONFIG_DVB_ATBM8830=y
CONFIG_DVB_TDA665x=y
# CONFIG_DVB_IX2505V is not setCONFIG_DVB_M88RS2000=y
# CONFIG_DVB_AF9033 is not set
# CONFIG_DVB_HORUS3A is not setCONFIG_DVB_ASCOT2E=yCONFIG_DVB_HELENE=y
#
# Tools to develop new frontends
#CONFIG_DVB_DUMMY_FE=y
#
# Graphics support
#CONFIG_DRM=yCONFIG_DRM_MIPI_DSI=yCONFIG_DRM_DP_AUX_CHARDEV=y
# CONFIG_DRM_DEBUG_MM is not setCONFIG_DRM_DEBUG_MM_SELFTEST=yCONFIG_DRM_KMS_HELPER=yCONFIG_DRM_KMS_FB_HELPER=yCONFIG_DRM_FBDEV_EMULATION=yCONFIG_DRM_FBDEV_OVERALLOC=100
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not setCONFIG_DRM_TTM=yCONFIG_DRM_GEM_CMA_HELPER=yCONFIG_DRM_KMS_CMA_HELPER=y
#
# I2C encoder or helper chips
#CONFIG_DRM_I2C_CH7006=yCONFIG_DRM_I2C_SIL164=y
# CONFIG_DRM_I2C_NXP_TDA998X is not set
#
# ACP (Audio CoProcessor) Configuration
#
# CONFIG_DRM_VGEM is not set
# CONFIG_DRM_RCAR_DW_HDMI is not setCONFIG_DRM_VIRTIO_GPU=yCONFIG_DRM_PANEL=y
#
# Display Panels
#CONFIG_DRM_PANEL_LVDS=y
# CONFIG_DRM_PANEL_SIMPLE is not set
# CONFIG_DRM_PANEL_INNOLUX_P079ZCA is not set CONFIG_DRM_PANEL_JDI_LT070ME05000=y CONFIG_DRM_PANEL_SAMSUNG_LD9040=y
# CONFIG_DRM_PANEL_LG_LG4573 is not set
# CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00 is not set CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2=y CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=y CONFIG_DRM_PANEL_SHARP_LQ101R1SX01=y
# CONFIG_DRM_PANEL_SHARP_LS043T1LE01 is not set CONFIG_DRM_PANEL_SITRONIX_ST7789V=y CONFIG_DRM_BRIDGE=y CONFIG_DRM_PANEL_BRIDGE=y
#
# Display Interface Bridges
#CONFIG_DRM_ANALOGIX_ANX78XX=yCONFIG_DRM_DUMB_VGA_DAC=yCONFIG_DRM_LVDS_ENCODER=yCONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW=yCONFIG_DRM_NXP_PTN3460=y
# CONFIG_DRM_PARADE_PS8622 is not setCONFIG_DRM_SIL_SII8620=yCONFIG_DRM_SII902X=yCONFIG_DRM_TOSHIBA_TC358767=y
# CONFIG_DRM_TI_TFP410 is not setCONFIG_DRM_I2C_ADV7511=yCONFIG_DRM_I2C_ADV7533=y
# CONFIG_DRM_ARCPGU is not setCONFIG_DRM_TINYDRM=yCONFIG_TINYDRM_MIPI_DBI=yCONFIG_TINYDRM_MI0283QT=y
# CONFIG_DRM_LEGACY is not setCONFIG_DRM_LIB_RANDOM=y
#
# Frame buffer Devices
#CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set CONFIG_FB_CMDLINE=yCONFIG_FB_NOTIFY=y
# CONFIG_FB_DDC is not set CONFIG_FB_BOOT_VESA_SUPPORT=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set CONFIG_FB_SYS_FILLRECT=y CONFIG_FB_SYS_COPYAREA=y CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_PROVIDE_GET_FB_UNMAPPED_AREA is not set CONFIG_FB_FOREIGN_ENDIAN=y CONFIG_FB_BOTH_ENDIAN=y
# CONFIG_FB_BIG_ENDIAN is not set
# CONFIG_FB_LITTLE_ENDIAN is not set CONFIG_FB_SYS_FOPS=y CONFIG_FB_DEFERRED_IO=yCONFIG_FB_HECUBA=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set CONFIG_FB_BACKLIGHT=y CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#CONFIG_FB_CLPS711X=y
# CONFIG_FB_ARC is not setCONFIG_FB_VGA16=yCONFIG_FB_VESA=yCONFIG_FB_N411=yCONFIG_FB_HGA=y
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_TMIO is not setCONFIG_FB_SM501=yCONFIG_FB_IBM_GXT4500=y
# CONFIG_FB_GOLDFISH is not setCONFIG_FB_VIRTUAL=y
# CONFIG_XEN_FBDEV_FRONTEND is not setCONFIG_FB_METRONOME=yCONFIG_FB_BROADSHEET=yCONFIG_FB_AUO_K190X=yCONFIG_FB_AUO_K1900=yCONFIG_FB_AUO_K1901=yCONFIG_FB_SIMPLE=yCONFIG_FB_SSD1307=yCONFIG_BACKLIGHT_LCD_SUPPORT=yCONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_L4F00242T03 is not set
# CONFIG_LCD_LMS283GF05 is not set
# CONFIG_LCD_LTV350QV is not setCONFIG_LCD_ILI922X=yCONFIG_LCD_ILI9320=y
# CONFIG_LCD_TDO24M is not setCONFIG_LCD_VGG2432A4=yCONFIG_LCD_PLATFORM=yCONFIG_LCD_S6E63M0=yCONFIG_LCD_LD9040=yCONFIG_LCD_AMS369FG06=y
# CONFIG_LCD_LMS501KF03 is not set
# CONFIG_LCD_HX8357 is not setCONFIG_BACKLIGHT_CLASS_DEVICE=yCONFIG_BACKLIGHT_GENERIC=yCONFIG_BACKLIGHT_LM3533=yCONFIG_BACKLIGHT_PWM=yCONFIG_BACKLIGHT_DA9052=yCONFIG_BACKLIGHT_MAX8925=yCONFIG_BACKLIGHT_PM8941_WLED=y
# CONFIG_BACKLIGHT_SAHARA is not setCONFIG_BACKLIGHT_WM831X=yCONFIG_BACKLIGHT_ADP5520=y
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_AAT2870 is not setCONFIG_BACKLIGHT_LM3630A=yCONFIG_BACKLIGHT_LM3639=y
# CONFIG_BACKLIGHT_LP855X is not setCONFIG_BACKLIGHT_LP8788=y
# CONFIG_BACKLIGHT_PANDORA is not set
# CONFIG_BACKLIGHT_SKY81452 is not setCONFIG_BACKLIGHT_GPIO=yCONFIG_BACKLIGHT_LV5207LP=y
# CONFIG_BACKLIGHT_BD6107 is not setCONFIG_BACKLIGHT_ARCXCNN=yCONFIG_VGASTATE=yCONFIG_VIDEOMODE_HELPERS=yCONFIG_HDMI=y
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not setCONFIG_DUMMY_CONSOLE=yCONFIG_DUMMY_CONSOLE_COLUMNS=80CONFIG_DUMMY_CONSOLE_ROWS=25CONFIG_FRAMEBUFFER_CONSOLE=yCONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=yCONFIG_FRAMEBUFFER_CONSOLE_ROTATION=yCONFIG_LOGO=yCONFIG_LOGO_LINUX_MONO=y
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not setCONFIG_SOUND=y
# CONFIG_SOUND_OSS_CORE is not set
# CONFIG_SND is not set
#
# HID support
#CONFIG_HID=yCONFIG_HID_BATTERY_STRENGTH=yCONFIG_HIDRAW=yCONFIG_UHID=yCONFIG_HID_GENERIC=y
#
# Special HID drivers
#CONFIG_HID_A4TECH=yCONFIG_HID_ACRUX=yCONFIG_HID_ACRUX_FF=yCONFIG_HID_APPLE=yCONFIG_HID_ASUS=y
# CONFIG_HID_AUREAL is not setCONFIG_HID_BELKIN=yCONFIG_HID_CHERRY=yCONFIG_HID_CHICONY=yCONFIG_HID_CMEDIA=yCONFIG_HID_CYPRESS=y
# CONFIG_HID_DRAGONRISE is not setCONFIG_HID_EMS_FF=yCONFIG_HID_ELECOM=yCONFIG_HID_EZKEY=y
# CONFIG_HID_GEMBIRD is not setCONFIG_HID_GFRM=yCONFIG_HID_KEYTOUCH=yCONFIG_HID_KYE=y
# CONFIG_HID_WALTOP is not setCONFIG_HID_GYRATION=yCONFIG_HID_ICADE=yCONFIG_HID_ITE=yCONFIG_HID_TWINHAN=y
# CONFIG_HID_KENSINGTON is not setCONFIG_HID_LCPOWER=yCONFIG_HID_LED=y
# CONFIG_HID_LENOVO is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MAGICMOUSE is not setCONFIG_HID_MAYFLASH=y
# CONFIG_HID_MICROSOFT is not setCONFIG_HID_MONTEREY=y
# CONFIG_HID_MULTITOUCH is not setCONFIG_HID_NTI=yCONFIG_HID_ORTEK=y
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not setCONFIG_HID_PLANTRONICS=yCONFIG_HID_PRIMAX=y
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not setCONFIG_HID_SPEEDLINK=yCONFIG_HID_STEELSERIES=yCONFIG_HID_SUNPLUS=yCONFIG_HID_RMI=y
# CONFIG_HID_GREENASIA is not setCONFIG_HID_SMARTJOYPLUS=y
# CONFIG_SMARTJOYPLUS_FF is not set
# CONFIG_HID_TIVO is not setCONFIG_HID_TOPSEED=y
# CONFIG_HID_THINGM is not setCONFIG_HID_THRUSTMASTER=y
# CONFIG_THRUSTMASTER_FF is not setCONFIG_HID_UDRAW_PS3=y
# CONFIG_HID_WACOM is not set
# CONFIG_HID_WIIMOTE is not set
# CONFIG_HID_XINMO is not setCONFIG_HID_ZEROPLUS=yCONFIG_ZEROPLUS_FF=yCONFIG_HID_ZYDACRON=yCONFIG_HID_SENSOR_HUB=yCONFIG_HID_SENSOR_CUSTOM_SENSOR=yCONFIG_HID_ALPS=y
#
# I2C HID support
#CONFIG_I2C_HID=yCONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SUPPORT is not setCONFIG_UWB=y
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not setCONFIG_NEW_LEDS=yCONFIG_LEDS_CLASS=yCONFIG_LEDS_CLASS_FLASH=yCONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y
#
# LED drivers
#
# CONFIG_LEDS_BCM6328 is not setCONFIG_LEDS_BCM6358=yCONFIG_LEDS_LM3530=yCONFIG_LEDS_LM3533=y
# CONFIG_LEDS_LM3642 is not setCONFIG_LEDS_PCA9532=y
# CONFIG_LEDS_PCA9532_GPIO is not setCONFIG_LEDS_GPIO=yCONFIG_LEDS_LP3944=yCONFIG_LEDS_LP3952=yCONFIG_LEDS_LP55XX_COMMON=yCONFIG_LEDS_LP5521=y
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_LP5562 is not set
# CONFIG_LEDS_LP8501 is not setCONFIG_LEDS_LP8788=y
# CONFIG_LEDS_LP8860 is not setCONFIG_LEDS_PCA955X=yCONFIG_LEDS_PCA963X=yCONFIG_LEDS_WM831X_STATUS=yCONFIG_LEDS_WM8350=yCONFIG_LEDS_DA9052=yCONFIG_LEDS_DAC124S085=yCONFIG_LEDS_PWM=yCONFIG_LEDS_REGULATOR=y
# CONFIG_LEDS_BD2802 is not setCONFIG_LEDS_LT3593=y
# CONFIG_LEDS_ADP5520 is not set
# CONFIG_LEDS_MC13783 is not setCONFIG_LEDS_TCA6507=y
# CONFIG_LEDS_TLC591XX is not setCONFIG_LEDS_MAX8997=y
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_OT200 is not setCONFIG_LEDS_KTD2692=yCONFIG_LEDS_IS31FL319X=y
# CONFIG_LEDS_IS31FL32XX is not set
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM) #
# CONFIG_LEDS_BLINKM is not setCONFIG_LEDS_SYSCON=yCONFIG_LEDS_MLXCPLD=y
# CONFIG_LEDS_USER is not set
#
# LED Triggers
#
# CONFIG_LEDS_TRIGGERS is not setCONFIG_ACCESSIBILITY=y
# CONFIG_A11Y_BRAILLE_CONSOLE is not setCONFIG_EDAC_ATOMIC_SCRUB=yCONFIG_EDAC_SUPPORT=yCONFIG_EDAC=yCONFIG_EDAC_LEGACY_SYSFS=yCONFIG_EDAC_DEBUG=yCONFIG_EDAC_XGENE=yCONFIG_RTC_LIB=yCONFIG_RTC_MC146818_LIB=y
# CONFIG_RTC_CLASS is not setCONFIG_DMADEVICES=yCONFIG_DMADEVICES_DEBUG=yCONFIG_DMADEVICES_VDEBUG=y
#
# DMA Devices
#CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=yCONFIG_DMA_ENGINE=yCONFIG_DMA_VIRTUAL_CHANNELS=yCONFIG_DMA_OF=y
# CONFIG_AXI_DMAC is not setCONFIG_COH901318=yCONFIG_DMA_JZ4740=yCONFIG_DMA_JZ4780=yCONFIG_DMA_OMAP=yCONFIG_DMA_SA11X0=y
# CONFIG_DMA_SUN6I is not set
# CONFIG_EP93XX_DMA is not setCONFIG_FSL_EDMA=yCONFIG_IMG_MDC_DMA=y
# CONFIG_INTEL_IDMA64 is not setCONFIG_K3_DMA=y
# CONFIG_MMP_PDMA is not set
# CONFIG_MMP_TDMA is not setCONFIG_MV_XOR=y
# CONFIG_MXS_DMA is not setCONFIG_NBPFAXI_DMA=y
# CONFIG_STM32_DMA is not set
# CONFIG_S3C24XX_DMAC is not set
# CONFIG_TIMB_DMA is not setCONFIG_TI_DMA_CROSSBAR=y
# CONFIG_TI_EDMA is not set
# CONFIG_XGENE_DMA is not set
# CONFIG_ZX_DMA is not setCONFIG_QCOM_HIDMA_MGMT=y
# CONFIG_QCOM_HIDMA is not setCONFIG_DW_DMAC_CORE=yCONFIG_DW_DMAC=yCONFIG_RENESAS_DMA=y
# CONFIG_SH_DMAE_BASE is not setCONFIG_RCAR_DMAC=yCONFIG_RENESAS_USB_DMAC=y
#
# DMA Clients
#CONFIG_ASYNC_TX_DMA=y
# CONFIG_DMATEST is not setCONFIG_DMA_ENGINE_RAID=y
#
# DMABUF options
#CONFIG_SYNC_FILE=y
# CONFIG_SW_SYNC is not set
# CONFIG_AUXDISPLAY is not setCONFIG_CHARLCD=yCONFIG_PANEL=yCONFIG_PANEL_PARPORT=0CONFIG_PANEL_PROFILE=5
# CONFIG_PANEL_CHANGE_MESSAGE is not set
# CONFIG_UIO is not setCONFIG_VIRT_DRIVERS=yCONFIG_VIRTIO=y
#
# Virtio drivers
#CONFIG_VIRTIO_BALLOON=y
# CONFIG_VIRTIO_INPUT is not set
# CONFIG_VIRTIO_MMIO is not set
#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV_TSCPAGE is not set
#
# Xen driver support
#
# CONFIG_XEN_BALLOON is not setCONFIG_XEN_DEV_EVTCHN=yCONFIG_XENFS=yCONFIG_XEN_COMPAT_XENFS=yCONFIG_XEN_SYS_HYPERVISOR=yCONFIG_XEN_XENBUS_FRONTEND=y
# CONFIG_XEN_GNTDEV is not setCONFIG_XEN_GRANT_DEV_ALLOC=yCONFIG_SWIOTLB_XEN=yCONFIG_XEN_TMEM=yCONFIG_XEN_PRIVCMD=y
# CONFIG_STAGING is not setCONFIG_X86_PLATFORM_DEVICES=yCONFIG_SENSORS_HDAPS=yCONFIG_SAMSUNG_LAPTOP=yCONFIG_INTEL_PUNIT_IPC=yCONFIG_MLX_PLATFORM=yCONFIG_MLX_CPLD_PLATFORM=y
# CONFIG_CHROME_PLATFORMS is not setCONFIG_HWSPINLOCK=y
#
# Clock Source drivers
#CONFIG_TIMER_OF=yCONFIG_TIMER_PROBE=yCONFIG_CLKEVT_I8253=yCONFIG_I8253_LOCK=yCONFIG_CLKBLD_I8253=yCONFIG_CLKSRC_MMIO=y
# CONFIG_BCM2835_TIMER is not setCONFIG_BCM_KONA_TIMER=y
# CONFIG_DIGICOLOR_TIMER is not set
# CONFIG_DW_APB_TIMER is not set
# CONFIG_FTTMR010_TIMER is not set
# CONFIG_MESON6_TIMER is not set
# CONFIG_OWL_TIMER is not set
# CONFIG_SUN4I_TIMER is not set
# CONFIG_VT8500_TIMER is not setCONFIG_ASM9260_TIMER=y
# CONFIG_CLKSRC_DBX500_PRCMU is not set
# CONFIG_CLPS711X_TIMER is not setCONFIG_ATLAS7_TIMER=y
# CONFIG_MXS_TIMER is not setCONFIG_PRIMA2_TIMER=yCONFIG_NSPIRE_TIMER=yCONFIG_INTEGRATOR_AP_TIMER=y
# CONFIG_CLKSRC_PISTACHIO is not setCONFIG_ARC_TIMERS=yCONFIG_ARC_TIMERS_64BIT=yCONFIG_ARMV7M_SYSTICK=y
# CONFIG_ATMEL_PIT is not setCONFIG_ATMEL_ST=y
# CONFIG_CLKSRC_SAMSUNG_PWM is not set
# CONFIG_FSL_FTM_TIMER is not set
# CONFIG_OXNAS_RPS_TIMER is not setCONFIG_MTK_TIMER=yCONFIG_CLKSRC_JCORE_PIT=yCONFIG_SH_TIMER_CMT=y
# CONFIG_SH_TIMER_MTU2 is not setCONFIG_RENESAS_OSTM=y
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
# CONFIG_CLKSRC_PXA is not setCONFIG_H8300_TMR8=y
# CONFIG_H8300_TMR16 is not setCONFIG_H8300_TPU=yCONFIG_CLKSRC_ST_LPC=yCONFIG_MAILBOX=yCONFIG_PLATFORM_MHU=yCONFIG_ROCKCHIP_MBOX=yCONFIG_ALTERA_MBOX=yCONFIG_MAILBOX_TEST=y
# CONFIG_QCOM_APCS_IPC is not set
# CONFIG_BCM_PDC_MBOX is not setCONFIG_IOMMU_SUPPORT=y
#
# Generic IOMMU Pagetable Support
#CONFIG_IOMMU_IO_PGTABLE=y CONFIG_IOMMU_IO_PGTABLE_LPAE=y CONFIG_IOMMU_IO_PGTABLE_LPAE_SELFTEST=y CONFIG_IOMMU_IO_PGTABLE_ARMV7S=y
# CONFIG_IOMMU_IO_PGTABLE_ARMV7S_SELFTEST is not set
#
# Remoteproc drivers
#CONFIG_REMOTEPROC=y
#
# Rpmsg drivers
#CONFIG_RPMSG=yCONFIG_RPMSG_QCOM_GLINK_RPM=y
#
# SOC (System On Chip) specific Drivers
#CONFIG_OWL_PM_DOMAINS_HELPER=yCONFIG_OWL_PM_DOMAINS=y
# CONFIG_AT91_SOC_ID is not set
#
# Broadcom SoC drivers
#
# CONFIG_SOC_BRCMSTB is not set
#
# i.MX SoC drivers
#
# CONFIG_IMX7_PM_DOMAINS is not setCONFIG_MTK_INFRACFG=yCONFIG_MTK_SCPSYS=yCONFIG_SOC_RENESAS=y
# CONFIG_SYSC_R8A7743 is not set
# CONFIG_SYSC_R8A7745 is not set
# CONFIG_SYSC_R8A7779 is not set
# CONFIG_SYSC_R8A7790 is not set
# CONFIG_SYSC_R8A7791 is not setCONFIG_SYSC_R8A7792=y
# CONFIG_SYSC_R8A7794 is not set
# CONFIG_SYSC_R8A7795 is not setCONFIG_SYSC_R8A7796=y
# CONFIG_RST_RCAR is not setCONFIG_SYSC_RCAR=yCONFIG_ROCKCHIP_GRF=yCONFIG_ROCKCHIP_PM_DOMAINS=yCONFIG_SOC_SAMSUNG=y
# CONFIG_EXYNOS_PM_DOMAINS is not set
# CONFIG_SUNXI_SRAM is not setCONFIG_SOC_TI=y
# CONFIG_UX500_SOC_ID is not setCONFIG_SOC_ZTE=yCONFIG_ZX2967_PM_DOMAINS=yCONFIG_PM_DEVFREQ=y
#
# DEVFREQ Governors
#CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=yCONFIG_DEVFREQ_GOV_PERFORMANCE=yCONFIG_DEVFREQ_GOV_POWERSAVE=yCONFIG_DEVFREQ_GOV_USERSPACE=yCONFIG_DEVFREQ_GOV_PASSIVE=y
#
# DEVFREQ Drivers
#CONFIG_ARM_EXYNOS_BUS_DEVFREQ=yCONFIG_PM_DEVFREQ_EVENT=yCONFIG_DEVFREQ_EVENT_EXYNOS_NOCP=yCONFIG_DEVFREQ_EVENT_EXYNOS_PPMU=yCONFIG_EXTCON=y
#
# Extcon Device Drivers
#CONFIG_EXTCON_GPIO=y
# CONFIG_EXTCON_MAX14577 is not setCONFIG_EXTCON_MAX3355=yCONFIG_EXTCON_MAX8997=yCONFIG_EXTCON_QCOM_SPMI_MISC=yCONFIG_EXTCON_RT8973A=y
# CONFIG_EXTCON_SM5502 is not setCONFIG_EXTCON_USB_GPIO=yCONFIG_MEMORY=yCONFIG_SAMSUNG_MC=yCONFIG_EXYNOS_SROM=y
# CONFIG_IIO is not setCONFIG_PWM=yCONFIG_PWM_SYSFS=yCONFIG_PWM_CLPS711X=yCONFIG_PWM_FSL_FTM=y
# CONFIG_PWM_HIBVT is not setCONFIG_PWM_LP3943=y
# CONFIG_PWM_MTK_DISP is not setCONFIG_PWM_MEDIATEK=y
# CONFIG_PWM_PCA9685 is not setCONFIG_PWM_RCAR=yCONFIG_PWM_RENESAS_TPU=yCONFIG_PWM_STM32=yCONFIG_PWM_STMPE=yCONFIG_PWM_TWL=yCONFIG_PWM_TWL_LED=yCONFIG_IRQCHIP=yCONFIG_ARM_GIC_MAX_NR=1CONFIG_JCORE_AIC=yCONFIG_TS4800_IRQ=y
# CONFIG_IPACK_BUS is not setCONFIG_RESET_CONTROLLER=y
# CONFIG_RESET_ATH79 is not setCONFIG_RESET_BERLIN=y
# CONFIG_RESET_GEMINI is not setCONFIG_RESET_IMX7=yCONFIG_RESET_LPC18XX=y
# CONFIG_RESET_MESON is not setCONFIG_RESET_PISTACHIO=yCONFIG_RESET_SOCFPGA=yCONFIG_RESET_STM32=y
# CONFIG_RESET_SUNXI is not setCONFIG_RESET_TI_SYSCON=y
# CONFIG_RESET_UNIPHIER is not setCONFIG_RESET_ZX2967=yCONFIG_RESET_ZYNQ=yCONFIG_COMMON_RESET_HI3660=yCONFIG_COMMON_RESET_HI6220=y
# CONFIG_RESET_TEGRA_BPMP is not setCONFIG_FMC=y
# CONFIG_FMC_FAKEDEV is not set
# CONFIG_FMC_TRIVIAL is not set
# CONFIG_FMC_WRITE_EEPROM is not setCONFIG_FMC_CHARDEV=y
#
# PHY Subsystem
#CONFIG_GENERIC_PHY=yCONFIG_PHY_LPC18XX_USB_OTG=y
# CONFIG_PHY_XGENE is not setCONFIG_PHY_CYGNUS_PCIE=y
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_PHY_BCM_NS_USB2 is not set
# CONFIG_PHY_BCM_NS_USB3 is not setCONFIG_PHY_NS2_USB_DRD=yCONFIG_PHY_BRCM_SATA=y
# CONFIG_PHY_HI6220_USB is not setCONFIG_ARMADA375_USBCLUSTER_PHY=yCONFIG_PHY_PXA_28NM_HSIC=y
# CONFIG_PHY_PXA_28NM_USB2 is not setCONFIG_PHY_QCOM_QUSB2=yCONFIG_PHY_RCAR_GEN3_USB3=yCONFIG_PHY_ROCKCHIP_PCIE=yCONFIG_PHY_ROCKCHIP_TYPEC=y
# CONFIG_PHY_EXYNOS_DP_VIDEO is not set
# CONFIG_PHY_EXYNOS_MIPI_VIDEO is not setCONFIG_PHY_EXYNOS_PCIE=y
# CONFIG_PHY_ST_SPEAR1310_MIPHY is not set
# CONFIG_PHY_ST_SPEAR1340_MIPHY is not setCONFIG_PHY_STIH407_USB=yCONFIG_OMAP_CONTROL_PHY=y
# CONFIG_POWERCAP is not setCONFIG_MCB=yCONFIG_MCB_LPC=y
#
# Performance monitor support
#CONFIG_RAS=y
#
# Android
#
# CONFIG_ANDROID is not setCONFIG_LIBNVDIMM=y
# CONFIG_BLK_DEV_PMEM is not setCONFIG_ND_BLK=y
# CONFIG_BTT is not setCONFIG_DAX=yCONFIG_NVMEM=y
# CONFIG_NVMEM_IMX_IIM is not set
# CONFIG_NVMEM_IMX_OCOTP is not setCONFIG_NVMEM_LPC18XX_EEPROM=yCONFIG_NVMEM_LPC18XX_OTP=y
# CONFIG_NVMEM_MXS_OCOTP is not setCONFIG_MTK_EFUSE=yCONFIG_QCOM_QFPROM=y
# CONFIG_ROCKCHIP_EFUSE is not set
# CONFIG_NVMEM_BCM_OCOTP is not setCONFIG_NVMEM_VF610_OCOTP=yCONFIG_STM=y
# CONFIG_STM_DUMMY is not setCONFIG_STM_SOURCE_CONSOLE=y
# CONFIG_STM_SOURCE_HEARTBEAT is not setCONFIG_INTEL_TH=y
# CONFIG_INTEL_TH_GTH is not setCONFIG_INTEL_TH_STH=yCONFIG_INTEL_TH_MSU=y
# CONFIG_INTEL_TH_PTI is not set
# CONFIG_INTEL_TH_DEBUG is not set
#
# FPGA Configuration Support
#CONFIG_FPGA=yCONFIG_FPGA_REGION=yCONFIG_FPGA_MGR_ICE40_SPI=y
# CONFIG_FPGA_MGR_SOCFPGA is not setCONFIG_FPGA_MGR_SOCFPGA_A10=y
# CONFIG_FPGA_MGR_XILINX_SPI is not set
# CONFIG_FPGA_MGR_ZYNQ_FPGA is not setCONFIG_FPGA_BRIDGE=y
# CONFIG_ALTERA_PR_IP_CORE is not set
# CONFIG_XILINX_PR_DECOUPLER is not set
#
# FSI support
#
# CONFIG_FSI is not setCONFIG_TEE=y
#
# TEE drivers
#CONFIG_MULTIPLEXER=yCONFIG_MUX_ADG792A=yCONFIG_MUX_GPIO=y
# CONFIG_MUX_MMIO is not set
#
# Firmware Drivers
#CONFIG_ARM_SCPI_PROTOCOL=yCONFIG_ARM_SCPI_POWER_DOMAIN=y
# CONFIG_EDD is not setCONFIG_FIRMWARE_MEMMAP=yCONFIG_DELL_RBU=yCONFIG_DCDBAS=yCONFIG_DMIID=yCONFIG_DMI_SYSFS=yCONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=yCONFIG_FW_CFG_SYSFS=yCONFIG_FW_CFG_SYSFS_CMDLINE=y
# CONFIG_GOOGLE_FIRMWARE is not set
#
# Tegra firmware driver
#
#
# File systems
#CONFIG_DCACHE_WORD_ACCESS=yCONFIG_FS_IOMAP=yCONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not setCONFIG_JFS_FS=y
# CONFIG_JFS_POSIX_ACL is not setCONFIG_JFS_SECURITY=yCONFIG_JFS_DEBUG=y
# CONFIG_JFS_STATISTICS is not setCONFIG_XFS_FS=y
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
# CONFIG_XFS_WARN is not set
# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
# CONFIG_BTRFS_FS is not setCONFIG_NILFS2_FS=y
# CONFIG_F2FS_FS is not set
# CONFIG_FS_DAX is not setCONFIG_FS_POSIX_ACL=yCONFIG_EXPORTFS=yCONFIG_EXPORTFS_BLOCK_OPS=yCONFIG_FILE_LOCKING=yCONFIG_MANDATORY_FILE_LOCKING=yCONFIG_FS_ENCRYPTION=yCONFIG_FSNOTIFY=yCONFIG_DNOTIFY=yCONFIG_INOTIFY_USER=yCONFIG_FANOTIFY=y
# CONFIG_QUOTA is not set
# CONFIG_QUOTACTL is not set
# CONFIG_AUTOFS4_FS is not setCONFIG_FUSE_FS=yCONFIG_CUSE=yCONFIG_OVERLAY_FS=yCONFIG_OVERLAY_FS_REDIRECT_DIR=yCONFIG_OVERLAY_FS_INDEX=y
#
# Caches
#CONFIG_FSCACHE=yCONFIG_FSCACHE_DEBUG=y
# CONFIG_CACHEFILES is not set
#
# CD-ROM/DVD Filesystems
#CONFIG_ISO9660_FS=y
# CONFIG_JOLIET is not setCONFIG_ZISOFS=y
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
# CONFIG_PROC_FS is not setCONFIG_PROC_CHILDREN=yCONFIG_KERNFS=yCONFIG_SYSFS=yCONFIG_HUGETLBFS=yCONFIG_HUGETLB_PAGE=yCONFIG_ARCH_HAS_GIGANTIC_PAGE=yCONFIG_CONFIGFS_FS=y
# CONFIG_MISC_FILESYSTEMS is not setCONFIG_NLS=yCONFIG_NLS_DEFAULT="iso8859-1"CONFIG_NLS_CODEPAGE_437=yCONFIG_NLS_CODEPAGE_737=y
# CONFIG_NLS_CODEPAGE_775 is not setCONFIG_NLS_CODEPAGE_850=yCONFIG_NLS_CODEPAGE_852=yCONFIG_NLS_CODEPAGE_855=yCONFIG_NLS_CODEPAGE_857=y
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not setCONFIG_NLS_CODEPAGE_863=y
# CONFIG_NLS_CODEPAGE_864 is not setCONFIG_NLS_CODEPAGE_865=yCONFIG_NLS_CODEPAGE_866=yCONFIG_NLS_CODEPAGE_869=yCONFIG_NLS_CODEPAGE_936=yCONFIG_NLS_CODEPAGE_950=y
# CONFIG_NLS_CODEPAGE_932 is not setCONFIG_NLS_CODEPAGE_949=yCONFIG_NLS_CODEPAGE_874=yCONFIG_NLS_ISO8859_8=yCONFIG_NLS_CODEPAGE_1250=y
# CONFIG_NLS_CODEPAGE_1251 is not setCONFIG_NLS_ASCII=yCONFIG_NLS_ISO8859_1=yCONFIG_NLS_ISO8859_2=y
# CONFIG_NLS_ISO8859_3 is not setCONFIG_NLS_ISO8859_4=y
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not setCONFIG_NLS_ISO8859_13=yCONFIG_NLS_ISO8859_14=yCONFIG_NLS_ISO8859_15=yCONFIG_NLS_KOI8_R=y
# CONFIG_NLS_KOI8_U is not setCONFIG_NLS_MAC_ROMAN=y
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not setCONFIG_NLS_MAC_CROATIAN=yCONFIG_NLS_MAC_CYRILLIC=y
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not setCONFIG_NLS_MAC_ICELAND=y
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not setCONFIG_NLS_MAC_TURKISH=y
# CONFIG_NLS_UTF8 is not set
#
# Kernel hacking
#CONFIG_TRACE_IRQFLAGS_SUPPORT=y
#
# printk and dmesg options # CONFIG_PRINTK_TIME=y CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7 CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4 # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_DYNAMIC_DEBUG is not set
#
# Compile-time checks and compiler options
#CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not setCONFIG_FRAME_WARN=2048
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_PAGE_OWNER is not setCONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not setCONFIG_DEBUG_SECTION_MISMATCH=yCONFIG_SECTION_MISMATCH_WARN_ONLY=yCONFIG_ARCH_WANT_FRAME_POINTERS=yCONFIG_FRAME_POINTER=y
# CONFIG_STACK_VALIDATION is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_MAGIC_SYSRQ is not setCONFIG_DEBUG_KERNEL=y
#
# Memory Debugging
#CONFIG_PAGE_EXTENSION=y CONFIG_DEBUG_PAGEALLOC=y
# CONFIG_DEBUG_PAGEALLOC_ENABLE_DEFAULT is not set # CONFIG_PAGE_POISONING is not set CONFIG_DEBUG_RODATA_TEST=y
# CONFIG_DEBUG_OBJECTS is not set CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUG_VM is not set CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y CONFIG_DEBUG_VIRTUAL=y CONFIG_DEBUG_MEMORY_INIT=y CONFIG_DEBUG_PER_CPU_MAPS=y CONFIG_HAVE_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_HAVE_ARCH_KMEMCHECK=y CONFIG_HAVE_ARCH_KASAN=y CONFIG_ARCH_HAS_KCOV=yCONFIG_KCOV=y
# CONFIG_KCOV_INSTRUMENT_ALL is not set
# CONFIG_DEBUG_SHIRQ is not set
#
# Debug Lockups and Hangs
#CONFIG_LOCKUP_DETECTOR=yCONFIG_SOFTLOCKUP_DETECTOR=yCONFIG_HARDLOCKUP_DETECTOR_PERF=yCONFIG_HARDLOCKUP_DETECTOR=yCONFIG_BOOTPARAM_HARDLOCKUP_PANIC=yCONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=1CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=yCONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_WQ_WATCHDOG is not setCONFIG_PANIC_ON_OOPS=yCONFIG_PANIC_ON_OOPS_VALUE=1CONFIG_PANIC_TIMEOUT=0
# CONFIG_SCHED_INFO is not setCONFIG_SCHED_STACK_END_CHECK=y
# CONFIG_DEBUG_TIMEKEEPING is not set
#
# Lock Debugging (spinlocks, mutexes, etc...)
#CONFIG_DEBUG_RT_MUTEXES=yCONFIG_DEBUG_SPINLOCK=yCONFIG_DEBUG_MUTEXES=yCONFIG_DEBUG_WW_MUTEX_SLOWPATH=yCONFIG_DEBUG_LOCK_ALLOC=yCONFIG_PROVE_LOCKING=yCONFIG_LOCKDEP=yCONFIG_LOCK_STAT=y
# CONFIG_DEBUG_LOCKDEP is not setCONFIG_DEBUG_ATOMIC_SLEEP=yCONFIG_DEBUG_LOCKING_API_SELFTESTS=yCONFIG_LOCK_TORTURE_TEST=yCONFIG_WW_MUTEX_SELFTEST=yCONFIG_TRACE_IRQFLAGS=yCONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not setCONFIG_DEBUG_KOBJECT=y
# CONFIG_DEBUG_BUGVERBOSE is not setCONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PI_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
#
# RCU Debugging
#CONFIG_PROVE_RCU=yCONFIG_TORTURE_TEST=yCONFIG_RCU_PERF_TEST=y
# CONFIG_RCU_TORTURE_TEST is not setCONFIG_RCU_CPU_STALL_TIMEOUT=21
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not setCONFIG_DEBUG_WQ_FORCE_RR_CPU=y
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not setCONFIG_NOTIFIER_ERROR_INJECTION=y
# CONFIG_PM_NOTIFIER_ERROR_INJECT is not setCONFIG_OF_RECONFIG_NOTIFIER_ERROR_INJECT=y
# CONFIG_FAULT_INJECTION is not setCONFIG_USER_STACKTRACE_SUPPORT=yCONFIG_HAVE_FUNCTION_TRACER=yCONFIG_HAVE_FUNCTION_GRAPH_TRACER=yCONFIG_HAVE_DYNAMIC_FTRACE=yCONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=yCONFIG_HAVE_FTRACE_MCOUNT_RECORD=yCONFIG_HAVE_SYSCALL_TRACEPOINTS=yCONFIG_HAVE_FENTRY=yCONFIG_HAVE_C_RECORDMCOUNT=yCONFIG_TRACE_CLOCK=yCONFIG_RING_BUFFER=yCONFIG_RING_BUFFER_ALLOW_SWAP=yCONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
#
# Runtime Testing
#
# CONFIG_LKDTM is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_TEST_SORT is not setCONFIG_BACKTRACE_SELF_TEST=yCONFIG_RBTREE_TEST=yCONFIG_INTERVAL_TREE_TEST=y
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_TEST_STRING_HELPERS is not setCONFIG_TEST_KSTRTOX=yCONFIG_TEST_PRINTF=yCONFIG_TEST_BITMAP=yCONFIG_TEST_UUID=yCONFIG_TEST_RHASHTABLE=yCONFIG_TEST_HASH=yCONFIG_TEST_PARMAN=y
# CONFIG_DMA_API_DEBUG is not setCONFIG_TEST_FIRMWARE=yCONFIG_TEST_UDELAY=yCONFIG_MEMTEST=yCONFIG_BUG_ON_DATA_CORRUPTION=yCONFIG_SAMPLES=yCONFIG_HAVE_ARCH_KGDB=yCONFIG_KGDB=y
# CONFIG_KGDB_SERIAL_CONSOLE is not setCONFIG_KGDB_TESTS=y
# CONFIG_KGDB_TESTS_ON_BOOT is not set
# CONFIG_KGDB_LOW_LEVEL_TRAP is not set
# CONFIG_KGDB_KDB is not setCONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_ARCH_WANTS_UBSAN_NO_NULL is not setCONFIG_UBSAN=yCONFIG_UBSAN_ALIGNMENT=yCONFIG_UBSAN_NULL=yCONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=yCONFIG_STRICT_DEVMEM=yCONFIG_IO_STRICT_DEVMEM=yCONFIG_X86_VERBOSE_BOOTUP=yCONFIG_EARLY_PRINTK=yCONFIG_X86_PTDUMP_CORE=yCONFIG_X86_PTDUMP=yCONFIG_DEBUG_WX=y
# CONFIG_DOUBLEFAULT is not setCONFIG_DEBUG_TLBFLUSH=y
# CONFIG_IOMMU_STRESS is not setCONFIG_HAVE_MMIOTRACE_SUPPORT=yCONFIG_IO_DELAY_TYPE_0X80=0CONFIG_IO_DELAY_TYPE_0XED=1CONFIG_IO_DELAY_TYPE_UDELAY=2CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
# CONFIG_IO_DELAY_0XED is not setCONFIG_IO_DELAY_UDELAY=y
# CONFIG_IO_DELAY_NONE is not setCONFIG_DEFAULT_IO_DELAY_TYPE=2
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not setCONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_ENTRY is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
# CONFIG_X86_DEBUG_FPU is not set
#
# Security options
#CONFIG_KEYS=yCONFIG_KEYS_COMPAT=yCONFIG_PERSISTENT_KEYRINGS=yCONFIG_TRUSTED_KEYS=yCONFIG_ENCRYPTED_KEYS=y
# CONFIG_KEY_DH_OPERATIONS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not setCONFIG_SECURITYFS=yCONFIG_FORTIFY_SOURCE=y
# CONFIG_STATIC_USERMODEHELPER is not setCONFIG_DEFAULT_SECURITY_DAC=yCONFIG_DEFAULT_SECURITY=""CONFIG_CRYPTO=y
#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not setCONFIG_CRYPTO_ALGAPI=yCONFIG_CRYPTO_ALGAPI2=yCONFIG_CRYPTO_AEAD=yCONFIG_CRYPTO_AEAD2=yCONFIG_CRYPTO_BLKCIPHER=yCONFIG_CRYPTO_BLKCIPHER2=yCONFIG_CRYPTO_HASH=yCONFIG_CRYPTO_HASH2=yCONFIG_CRYPTO_RNG=yCONFIG_CRYPTO_RNG2=yCONFIG_CRYPTO_RNG_DEFAULT=yCONFIG_CRYPTO_AKCIPHER2=yCONFIG_CRYPTO_AKCIPHER=yCONFIG_CRYPTO_KPP2=yCONFIG_CRYPTO_ACOMP2=yCONFIG_CRYPTO_RSA=y
# CONFIG_CRYPTO_DH is not set
# CONFIG_CRYPTO_ECDH is not setCONFIG_CRYPTO_MANAGER=yCONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not setCONFIG_CRYPTO_GF128MUL=yCONFIG_CRYPTO_NULL=yCONFIG_CRYPTO_NULL2=yCONFIG_CRYPTO_PCRYPT=yCONFIG_CRYPTO_WORKQUEUE=yCONFIG_CRYPTO_CRYPTD=yCONFIG_CRYPTO_MCRYPTD=yCONFIG_CRYPTO_AUTHENC=yCONFIG_CRYPTO_ABLK_HELPER=yCONFIG_CRYPTO_SIMD=yCONFIG_CRYPTO_GLUE_HELPER_X86=y
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not setCONFIG_CRYPTO_CHACHA20POLY1305=yCONFIG_CRYPTO_SEQIV=yCONFIG_CRYPTO_ECHAINIV=y
#
# Block modes
#CONFIG_CRYPTO_CBC=yCONFIG_CRYPTO_CTR=yCONFIG_CRYPTO_CTS=yCONFIG_CRYPTO_ECB=yCONFIG_CRYPTO_LRW=yCONFIG_CRYPTO_PCBC=yCONFIG_CRYPTO_XTS=y
# CONFIG_CRYPTO_KEYWRAP is not set
#
# Hash modes
#CONFIG_CRYPTO_CMAC=yCONFIG_CRYPTO_HMAC=yCONFIG_CRYPTO_XCBC=yCONFIG_CRYPTO_VMAC=y
#
# Digest
#CONFIG_CRYPTO_CRC32C=yCONFIG_CRYPTO_CRC32C_INTEL=yCONFIG_CRYPTO_CRC32=y
# CONFIG_CRYPTO_CRC32_PCLMUL is not setCONFIG_CRYPTO_CRCT10DIF=yCONFIG_CRYPTO_CRCT10DIF_PCLMUL=yCONFIG_CRYPTO_GHASH=yCONFIG_CRYPTO_POLY1305=y
# CONFIG_CRYPTO_POLY1305_X86_64 is not set
# CONFIG_CRYPTO_MD4 is not setCONFIG_CRYPTO_MD5=yCONFIG_CRYPTO_MICHAEL_MIC=yCONFIG_CRYPTO_RMD128=y
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not setCONFIG_CRYPTO_RMD320=yCONFIG_CRYPTO_SHA1=yCONFIG_CRYPTO_SHA1_SSSE3=y
# CONFIG_CRYPTO_SHA256_SSSE3 is not set
# CONFIG_CRYPTO_SHA512_SSSE3 is not set
# CONFIG_CRYPTO_SHA1_MB is not setCONFIG_CRYPTO_SHA256_MB=y
# CONFIG_CRYPTO_SHA512_MB is not setCONFIG_CRYPTO_SHA256=yCONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_SHA3 is not setCONFIG_CRYPTO_TGR192=yCONFIG_CRYPTO_WP512=y
# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set
#
# Ciphers
#CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set CONFIG_CRYPTO_AES_X86_64=y CONFIG_CRYPTO_AES_NI_INTEL=y CONFIG_CRYPTO_ANUBIS=y
# CONFIG_CRYPTO_ARC4 is not set CONFIG_CRYPTO_BLOWFISH=y CONFIG_CRYPTO_BLOWFISH_COMMON=y
# CONFIG_CRYPTO_BLOWFISH_X86_64 is not set CONFIG_CRYPTO_CAMELLIA=y CONFIG_CRYPTO_CAMELLIA_X86_64=y CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=y
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64 is not set CONFIG_CRYPTO_CAST_COMMON=y CONFIG_CRYPTO_CAST5=y
# CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set CONFIG_CRYPTO_CAST6=y
# CONFIG_CRYPTO_CAST6_AVX_X86_64 is not set CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_DES3_EDE_X86_64 is not set CONFIG_CRYPTO_FCRYPT=yCONFIG_CRYPTO_KHAZAD=y CONFIG_CRYPTO_SALSA20=y
# CONFIG_CRYPTO_SALSA20_X86_64 is not set CONFIG_CRYPTO_CHACHA20=y CONFIG_CRYPTO_CHACHA20_X86_64=y CONFIG_CRYPTO_SEED=yCONFIG_CRYPTO_SERPENT=y CONFIG_CRYPTO_SERPENT_SSE2_X86_64=y
# CONFIG_CRYPTO_SERPENT_AVX_X86_64 is not set # CONFIG_CRYPTO_SERPENT_AVX2_X86_64 is not set # CONFIG_CRYPTO_TEA is not set CONFIG_CRYPTO_TWOFISH=y CONFIG_CRYPTO_TWOFISH_COMMON=y CONFIG_CRYPTO_TWOFISH_X86_64=y CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=y CONFIG_CRYPTO_TWOFISH_AVX_X86_64=y
#
# Compression
#CONFIG_CRYPTO_DEFLATE=yCONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not setCONFIG_CRYPTO_LZ4HC=y
#
# Random Number Generation
#CONFIG_CRYPTO_ANSI_CPRNG=y CONFIG_CRYPTO_DRBG_MENU=y CONFIG_CRYPTO_DRBG_HMAC=y CONFIG_CRYPTO_DRBG_HASH=y
# CONFIG_CRYPTO_DRBG_CTR is not set CONFIG_CRYPTO_DRBG=y CONFIG_CRYPTO_JITTERENTROPY=y CONFIG_CRYPTO_HASH_INFO=yCONFIG_CRYPTO_HW=yCONFIG_CRYPTO_DEV_PADLOCK=y CONFIG_CRYPTO_DEV_PADLOCK_AES=y CONFIG_CRYPTO_DEV_PADLOCK_SHA=y
# CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC is not set # CONFIG_CRYPTO_DEV_EXYNOS_RNG is not set CONFIG_CRYPTO_DEV_S5P=y CONFIG_CRYPTO_DEV_ATMEL_AUTHENC=y CONFIG_CRYPTO_DEV_ATMEL_AES=y CONFIG_CRYPTO_DEV_ATMEL_TDES=y CONFIG_CRYPTO_DEV_ATMEL_SHA=y
# CONFIG_CRYPTO_DEV_QCE is not set
# CONFIG_CRYPTO_DEV_IMGTEC_HASH is not set CONFIG_CRYPTO_DEV_MEDIATEK=y
# CONFIG_CRYPTO_DEV_VIRTIO is not set
# CONFIG_CRYPTO_DEV_SAFEXCEL is not set CONFIG_ASYMMETRIC_KEY_TYPE=y
# CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE is not set
#
# Certificates for signature checking
#CONFIG_SYSTEM_TRUSTED_KEYRING=yCONFIG_SYSTEM_TRUSTED_KEYS=""CONFIG_SYSTEM_EXTRA_CERTIFICATE=yCONFIG_SYSTEM_EXTRA_CERTIFICATE_SIZE=4096
# CONFIG_SECONDARY_TRUSTED_KEYRING is not set
# CONFIG_SYSTEM_BLACKLIST_KEYRING is not setCONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#CONFIG_BITREVERSE=y
# CONFIG_HAVE_ARCH_BITREVERSE is not setCONFIG_RATIONAL=yCONFIG_GENERIC_STRNCPY_FROM_USER=yCONFIG_GENERIC_STRNLEN_USER=yCONFIG_GENERIC_FIND_FIRST_BIT=yCONFIG_GENERIC_PCI_IOMAP=yCONFIG_GENERIC_IOMAP=yCONFIG_GENERIC_IO=yCONFIG_STMP_DEVICE=yCONFIG_ARCH_USE_CMPXCHG_LOCKREF=yCONFIG_ARCH_HAS_FAST_MULTIPLIER=yCONFIG_CRC_CCITT=yCONFIG_CRC16=yCONFIG_CRC_T10DIF=yCONFIG_CRC_ITU_T=yCONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not setCONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC4 is not setCONFIG_CRC7=yCONFIG_LIBCRC32C=yCONFIG_CRC8=y
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
# CONFIG_RANDOM32_SELFTEST is not setCONFIG_ZLIB_INFLATE=yCONFIG_ZLIB_DEFLATE=yCONFIG_LZO_COMPRESS=yCONFIG_LZO_DECOMPRESS=yCONFIG_LZ4HC_COMPRESS=yCONFIG_LZ4_DECOMPRESS=yCONFIG_XZ_DEC=y
# CONFIG_XZ_DEC_X86 is not setCONFIG_XZ_DEC_POWERPC=yCONFIG_XZ_DEC_IA64=y
# CONFIG_XZ_DEC_ARM is not setCONFIG_XZ_DEC_ARMTHUMB=yCONFIG_XZ_DEC_SPARC=yCONFIG_XZ_DEC_BCJ=yCONFIG_XZ_DEC_TEST=yCONFIG_GENERIC_ALLOCATOR=yCONFIG_INTERVAL_TREE=yCONFIG_ASSOCIATIVE_ARRAY=yCONFIG_HAS_IOMEM=yCONFIG_HAS_IOPORT_MAP=yCONFIG_HAS_DMA=y
# CONFIG_DMA_NOOP_OPS is not set
# CONFIG_DMA_VIRT_OPS is not setCONFIG_CPUMASK_OFFSTACK=yCONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not setCONFIG_CLZ_TAB=yCONFIG_CORDIC=y
# CONFIG_DDR is not set
# CONFIG_IRQ_POLL is not setCONFIG_MPILIB=yCONFIG_FONT_SUPPORT=yCONFIG_FONTS=y
# CONFIG_FONT_8x8 is not set
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
CONFIG_FONT_7x14=y
CONFIG_FONT_PEARL_8x8=y
CONFIG_FONT_ACORN_8x8=y
CONFIG_FONT_MINI_4x6=y
# CONFIG_FONT_6x10 is not set
# CONFIG_FONT_10x18 is not set
CONFIG_FONT_SUN8x16=y
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_SG_SPLIT is not setCONFIG_SG_POOL=yCONFIG_ARCH_HAS_SG_CHAIN=yCONFIG_ARCH_HAS_PMEM_API=yCONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=yCONFIG_ARCH_HAS_MMIO_FLUSH=yCONFIG_SBITMAP=yCONFIG_PARMAN=yCONFIG_PRIME_NUMBERS=y
tip-bot for Ingo Molnar
merge bot[tip:x86/mm] x86/boot: Fix memremap() related build failure
x86/boot: Fix memremap() related build failure
Commit-ID: 693bf0aa01b7f9a1b24b2b932d555c6667f17a1a Gitweb: http://git.kernel.org/tip/693bf0aa01b7f9a1b24b2b932d555c6667f17a1a Author: Ingo Molnar <[email protected]> AuthorDate: Thu, 20 Jul 2017 11:23:07 +0200 Committer: Ingo Molnar <[email protected]> CommitDate: Thu, 20 Jul 2017 11:37:58 +0200
x86/boot: Fix memremap() related build failure
The following commit:
5997efb96756 ("x86/boot: Use memremap() to map the MPF and MPC data")
causes new build failures on certain randconfigs:
drivers/sfi/sfi_core.c: In function ‘sfi_map_memory’:
drivers/sfi/sfi_core.c:104:10: error: implicit declaration of function ‘memremap’ [-Werror=implicit-function-declaration] drivers/sfi/sfi_core.c:104:31: error: ‘MEMREMAP_WB’ undeclared (first use in this function)
This is a case of parasitic header dependencies: the sfi_core.c file indirectly includes <linux/io.h> for typical - but not all configs.
Including <linux/io.h> explicitly solves the build failure.
--- drivers/sfi/sfi_core.c | 1 + 1 file changed, 1 insertion(+)
drivers/sfi/sfi_core.c +1 -0
@@ -68,6 +68,7 @@#include <linux/init.h> #include <linux/sfi.h> #include <linux/slab.h> +#include <linux/io.h> #include "sfi_core.h"
Re: [PATCH v10 20/38] x86, mpparse: Use memremap to map the mpf and mpc data
In reply to Tom LendackyQuoted 7 lines · Tom Lendacky
The SMP MP-table is built by UEFI and placed in memory in a decrypted state. These tables are accessed using a mix of
early_memremap(),early_memunmap(),phys_to_virt()andvirt_to_phys(). Change all accesses to use early_memremap()/early_memunmap(). This allows for proper setting of the encryption mask so that the data can be successfully accessed when SME is active.
Quoted 5 lines
Reviewed-by Borislav Petkov <[email protected]>Signed-off-by Tom Lendacky <[email protected]>--- arch/x86/kernel/mpparse.c | 98 +++++++++++++++++++++++++++++++++-------------- 1 file changed, 70 insertions(+), 28 deletions(-)
Hi there,
today I played a bit with crosvm [0] and noticed that 4.14-rc7 doesn't boot. git-bisect pointed to this patch, and reverting it indeed gets things working again.
Anybody has an idea of why this could be?
Thanks,
Tomeu
[0] https://chromium.googlesource.com/chromiumos/platform/crosvm
Quoted 235 lines
arch/x86/kernel/mpparse.c +70
-29@@ -429,7 +429,7 @@ static inline void __init construct_default_ISA_mptable(int mpc_default_type) } } -static struct mpf_intel *mpf_found; +static unsigned long mpf_base;static unsigned long __init get_mpc_size (unsigned long physptr) {@@ -451,6 +451,7 @@ static int __init check_physptr(struct mpf_intel *mpf, unsigned int early) size =get_mpc_size (mpf->physptr); mpc =early_memremap (mpf->physptr, size); +/* * Read the physical hardware table. Anything here will * override the defaults. @@ -497,12 +498,12 @@ static int __init check_physptr(struct mpf_intel *mpf, unsigned int early)*/ void __init default_get_smp_config (unsigned int early) { -struct mpf_intel *mpf = mpf_found; +struct mpf_intel *mpf;if (!smp_found_config)return ; -if (!mpf) +if (!mpf_base)return ;if (acpi_lapic && early)@@ -515,6 +516,12 @@ void __init default_get_smp_config(unsigned int early)if (acpi_lapic && acpi_ioapic)return ; + mpf =early_memremap (mpf_base,sizeof (*mpf)); +if (!mpf) { +pr_err ("MPTABLE: error mapping MP table\n" ); +return ; + } +pr_info ("Intel MultiProcessor Specification v1.%d\n" , mpf->specification);#if defined(CONFIG_X86_LOCAL_APIC ) && defined(CONFIG_X86_32 )@@ -529,7 +536,7 @@ void __init default_get_smp_config(unsigned int early)/* * Now see if we need to read further. */ -if (mpf->feature1 !=0 ) { +if (mpf->feature1) {if (early) {/* * local APIC has default address @@ -542,8 +549,10 @@ void __init default_get_smp_config(unsigned int early)construct_default_ISA_mptable (mpf->feature1); }else if (mpf->physptr) { -if (check_physptr (mpf, early)) +if (check_physptr (mpf, early)) { +early_memunmap (mpf,sizeof (*mpf));return ; + } }else BUG ();@@ -552,6 +561,8 @@ void __init default_get_smp_config(unsigned int early)/* * Only use the first configuration found. */ + +early_memunmap (mpf,sizeof (*mpf)); }static void __init smp_reserve_memory (struct mpf_intel *mpf)@@ -561,15 +572,16 @@ static void __init smp_reserve_memory(struct mpf_intel *mpf)static int __init smp_scan_config (unsigned long base,unsigned long length) { -unsigned int *bp =phys_to_virt (base); +unsigned int *bp;struct mpf_intel *mpf; -unsigned long mem; +int ret =0 ;apic_printk (APIC_VERBOSE ,"Scan for SMP in [mem %#010lx-%#010lx]\n" , base, base + length -1 );BUILD_BUG_ON (sizeof (*mpf) !=16 );while (length >0 ) { + bp =early_memremap (base, length); mpf = (struct mpf_intel *)bp; if ((*bp == SMP_MAGIC_IDENT) && (mpf->length == 1) &&@@ -579,24 +591,26 @@ static int __init smp_scan_config(unsigned long base, unsigned long length)#ifdef CONFIG_X86_LOCAL_APIC smp_found_config =1 ;#endif - mpf_found = mpf; + mpf_base = base; -pr_info ("found SMP MP-table at [mem %#010llx-%#010llx] mapped at [%p]\n" , - (unsigned long long )virt_to_phys (mpf), - (unsigned long long )virt_to_phys (mpf) + -sizeof (*mpf) -1 , mpf); +pr_info ("found SMP MP-table at [mem %#010lx-%#010lx] mapped at [%p]\n" , + base, base +sizeof (*mpf) -1 , mpf); - mem =virt_to_phys (mpf); -memblock_reserve (mem,sizeof (*mpf)); +memblock_reserve (base,sizeof (*mpf));if (mpf->physptr)smp_reserve_memory (mpf); -return 1 ; + ret =1 ; } - bp +=4 ; +early_memunmap (bp, length); + +if (ret) +break ; + + base +=16 ; length -=16 ; } -return 0 ; +return ret; }void __init default_find_smp_config (void )@@ -838,29 +852,40 @@ static int __init update_mp_table(void)char oem[10 ];struct mpf_intel *mpf;struct mpc_table *mpc, *mpc_new; +unsigned long size;if (!enable_update_mptable)return 0 ; - mpf = mpf_found; -if (!mpf) +if (!mpf_base) +return 0 ; + + mpf =early_memremap (mpf_base,sizeof (*mpf)); +if (!mpf) { +pr_err ("MPTABLE: mpf early_memremap() failed\n" );return 0 ; + }/* * Now see if we need to go further. */ -if (mpf->feature1 !=0 ) -return 0 ; +if (mpf->feature1) + goto do_unmap_mpf;if (!mpf->physptr) -return 0 ; + goto do_unmap_mpf; - mpc =phys_to_virt (mpf->physptr); + size =get_mpc_size (mpf->physptr); + mpc =early_memremap (mpf->physptr, size); +if (!mpc) { +pr_err ("MPTABLE: mpc early_memremap() failed\n" ); + goto do_unmap_mpf; + }if (!smp_check_mpc (mpc, oem, str)) -return 0 ; + goto do_unmap_mpc; -pr_info ("mpf: %llx\n" , (u64 )virt_to_phys (mpf)); +pr_info ("mpf: %llx\n" , (u64 )mpf_base);pr_info ("physptr: %x\n" , mpf->physptr);if (mpc_new_phys && mpc->length > mpc_new_length) {@@ -878,21 +903,32 @@ static int __init update_mp_table(void) new =mpf_checksum ((unsigned char *)mpc, mpc->length);if (old == new) {pr_info ("mpc is readonly, please try alloc_mptable instead\n" ); -return 0 ; + goto do_unmap_mpc; }pr_info ("use in-position replacing\n" ); }else { + mpc_new =early_memremap (mpc_new_phys, mpc_new_length); +if (!mpc_new) { +pr_err ("MPTABLE: new mpc early_memremap() failed\n" ); + goto do_unmap_mpc; + } mpf->physptr = mpc_new_phys; - mpc_new =phys_to_virt (mpc_new_phys);memcpy (mpc_new, mpc, mpc->length); +early_memunmap (mpc, size); mpc = mpc_new; + size = mpc_new_length;/* check if we can modify that */ if (mpc_new_phys - mpf->physptr) {struct mpf_intel *mpf_new;/* steal 16 bytes from [0, 1k) */ + mpf_new =early_memremap (0x400 -16 ,sizeof (*mpf_new)); +if (!mpf_new) { +pr_err ("MPTABLE: new mpf early_memremap() failed\n" ); + goto do_unmap_mpc; + }pr_info ("mpf new: %x\n" ,0x400 -16 ); - mpf_new =phys_to_virt (0x400 -16 );memcpy (mpf_new, mpf,16 ); +early_memunmap (mpf,sizeof (*mpf)); mpf = mpf_new; mpf->physptr = mpc_new_phys; }@@ -909,6 +945,12 @@ static int __init update_mp_table(void)*/ replace_intsrc_all (mpc, mpc_new_phys, mpc_new_length); +do_unmap_mpc: +early_memunmap (mpc, size); + +do_unmap_mpf: +early_memunmap (mpf,sizeof (*mpf)); +return 0 ; } --
Quoted 2 lines
1.9.1
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [PATCH v10 20/38] x86, mpparse: Use memremap to map the mpf and mpc data
Quoted 14 lines · Tomeu Vizoso
Quoted 7 lines · Tom Lendacky
The SMP MP-table is built by UEFI and placed in memory in a decrypted state. These tables are accessed using a mix of
early_memremap(),early_memunmap(),phys_to_virt()andvirt_to_phys(). Change all accesses to use early_memremap()/early_memunmap(). This allows for proper setting of the encryption mask so that the data can be successfully accessed when SME is active.Quoted 5 lines
Reviewed-by Borislav Petkov <[email protected]>Signed-off-by Tom Lendacky <[email protected]>--- arch/x86/kernel/mpparse.c | 98 +++++++++++++++++++++++++++++++++-------------- 1 file changed, 70 insertions(+), 28 deletions(-)
Quoted 7 lines
Hi there,
today I played a bit with crosvm [0] and noticed that 4.14-rc7 doesn't boot. git-bisect pointed to this patch, and reverting it indeed gets things working again.
Anybody has an idea of why this could be?
If you send me your kernel config I'll see if I can reproduce the issue and debug it.
Thanks,
Tom
Quoted 241 lines
Thanks,
Tomeu
[0] https://chromium.googlesource.com/chromiumos/platform/crosvm
Quoted 234 lines
arch/x86/kernel/mpparse.c +70
-28@@ -429,7 +429,7 @@ static inline void __init construct_default_ISA_mptable(int mpc_default_type) } } -static struct mpf_intel *mpf_found; +static unsigned long mpf_base;static unsigned long __init get_mpc_size (unsigned long physptr) {@@ -451,6 +451,7 @@ static int __init check_physptr(struct mpf_intel *mpf, unsigned int early) size =get_mpc_size (mpf->physptr); mpc =early_memremap (mpf->physptr, size); +/* * Read the physical hardware table. Anything here will * override the defaults. @@ -497,12 +498,12 @@ static int __init check_physptr(struct mpf_intel *mpf, unsigned int early)*/ void __init default_get_smp_config (unsigned int early) { -struct mpf_intel *mpf = mpf_found; +struct mpf_intel *mpf;if (!smp_found_config)return ; -if (!mpf) +if (!mpf_base)return ;if (acpi_lapic && early)@@ -515,6 +516,12 @@ void __init default_get_smp_config(unsigned int early)if (acpi_lapic && acpi_ioapic)return ; + mpf =early_memremap (mpf_base,sizeof (*mpf)); +if (!mpf) { +pr_err ("MPTABLE: error mapping MP table\n" ); +return ; + } +pr_info ("Intel MultiProcessor Specification v1.%d\n" , mpf->specification);#if defined(CONFIG_X86_LOCAL_APIC ) && defined(CONFIG_X86_32 )@@ -529,7 +536,7 @@ void __init default_get_smp_config(unsigned int early)/* * Now see if we need to read further. */ -if (mpf->feature1 !=0 ) { +if (mpf->feature1) {if (early) {/* * local APIC has default address @@ -542,8 +549,10 @@ void __init default_get_smp_config(unsigned int early)construct_default_ISA_mptable (mpf->feature1); }else if (mpf->physptr) { -if (check_physptr (mpf, early)) +if (check_physptr (mpf, early)) { +early_memunmap (mpf,sizeof (*mpf));return ; + } }else BUG ();@@ -552,6 +561,8 @@ void __init default_get_smp_config(unsigned int early)/* * Only use the first configuration found. */ + +early_memunmap (mpf,sizeof (*mpf)); }static void __init smp_reserve_memory (struct mpf_intel *mpf)@@ -561,15 +572,16 @@ static void __init smp_reserve_memory(struct mpf_intel *mpf)static int __init smp_scan_config (unsigned long base,unsigned long length) { -unsigned int *bp =phys_to_virt (base); +unsigned int *bp;struct mpf_intel *mpf; -unsigned long mem; +int ret =0 ;apic_printk (APIC_VERBOSE ,"Scan for SMP in [mem %#010lx-%#010lx]\n" , base, base + length -1 );BUILD_BUG_ON (sizeof (*mpf) !=16 );while (length >0 ) { + bp =early_memremap (base, length); mpf = (struct mpf_intel *)bp; if ((*bp == SMP_MAGIC_IDENT) && (mpf->length == 1) &&@@ -579,24 +591,26 @@ static int __init smp_scan_config(unsigned long base, unsigned long length)#ifdef CONFIG_X86_LOCAL_APIC smp_found_config =1 ;#endif - mpf_found = mpf; + mpf_base = base; -pr_info ("found SMP MP-table at [mem %#010llx-%#010llx] mapped at [%p]\n" , - (unsigned long long )virt_to_phys (mpf), - (unsigned long long )virt_to_phys (mpf) + -sizeof (*mpf) -1 , mpf); +pr_info ("found SMP MP-table at [mem %#010lx-%#010lx] mapped at [%p]\n" , + base, base +sizeof (*mpf) -1 , mpf); - mem =virt_to_phys (mpf); -memblock_reserve (mem,sizeof (*mpf)); +memblock_reserve (base,sizeof (*mpf));if (mpf->physptr)smp_reserve_memory (mpf); -return 1 ; + ret =1 ; } - bp +=4 ; +early_memunmap (bp, length); + +if (ret) +break ; + + base +=16 ; length -=16 ; } -return 0 ; +return ret; }void __init default_find_smp_config (void )@@ -838,29 +852,40 @@ static int __init update_mp_table(void)char oem[10 ];struct mpf_intel *mpf;struct mpc_table *mpc, *mpc_new; +unsigned long size;if (!enable_update_mptable)return 0 ; - mpf = mpf_found; -if (!mpf) +if (!mpf_base) +return 0 ; + + mpf =early_memremap (mpf_base,sizeof (*mpf)); +if (!mpf) { +pr_err ("MPTABLE: mpf early_memremap() failed\n" );return 0 ; + }/* * Now see if we need to go further. */ -if (mpf->feature1 !=0 ) -return 0 ; +if (mpf->feature1) + goto do_unmap_mpf;if (!mpf->physptr) -return 0 ; + goto do_unmap_mpf; - mpc =phys_to_virt (mpf->physptr); + size =get_mpc_size (mpf->physptr); + mpc =early_memremap (mpf->physptr, size); +if (!mpc) { +pr_err ("MPTABLE: mpc early_memremap() failed\n" ); + goto do_unmap_mpf; + }if (!smp_check_mpc (mpc, oem, str)) -return 0 ; + goto do_unmap_mpc; -pr_info ("mpf: %llx\n" , (u64 )virt_to_phys (mpf)); +pr_info ("mpf: %llx\n" , (u64 )mpf_base);pr_info ("physptr: %x\n" , mpf->physptr);if (mpc_new_phys && mpc->length > mpc_new_length) {@@ -878,21 +903,32 @@ static int __init update_mp_table(void) new =mpf_checksum ((unsigned char *)mpc, mpc->length);if (old == new) {pr_info ("mpc is readonly, please try alloc_mptable instead\n" ); -return 0 ; + goto do_unmap_mpc; }pr_info ("use in-position replacing\n" ); }else { + mpc_new =early_memremap (mpc_new_phys, mpc_new_length); +if (!mpc_new) { +pr_err ("MPTABLE: new mpc early_memremap() failed\n" ); + goto do_unmap_mpc; + } mpf->physptr = mpc_new_phys; - mpc_new =phys_to_virt (mpc_new_phys);memcpy (mpc_new, mpc, mpc->length); +early_memunmap (mpc, size); mpc = mpc_new; + size = mpc_new_length;/* check if we can modify that */ if (mpc_new_phys - mpf->physptr) {struct mpf_intel *mpf_new;/* steal 16 bytes from [0, 1k) */ + mpf_new =early_memremap (0x400 -16 ,sizeof (*mpf_new)); +if (!mpf_new) { +pr_err ("MPTABLE: new mpf early_memremap() failed\n" ); + goto do_unmap_mpc; + }pr_info ("mpf new: %x\n" ,0x400 -16 ); - mpf_new =phys_to_virt (0x400 -16 );memcpy (mpf_new, mpf,16 ); +early_memunmap (mpf,sizeof (*mpf)); mpf = mpf_new; mpf->physptr = mpc_new_phys; }@@ -909,6 +945,12 @@ static int __init update_mp_table(void)*/ replace_intsrc_all (mpc, mpc_new_phys, mpc_new_length); +do_unmap_mpc: +early_memunmap (mpc, size); + +do_unmap_mpf: +early_memunmap (mpf,sizeof (*mpf)); +return 0 ; }
Quoted 3 lines
Quoted 3 lines
--
1.9.1
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [PATCH v10 20/38] x86, mpparse: Use memremap to map the mpf and mpc data
Quoted 25 lines · Tom Lendacky
Quoted 24 lines · Tomeu Vizoso
Quoted 8 lines · Tom Lendacky
The SMP MP-table is built by UEFI and placed in memory in a decrypted state. These tables are accessed using a mix of
early_memremap(),early_memunmap(),phys_to_virt()andvirt_to_phys(). Change all accesses to use early_memremap()/early_memunmap(). This allows for proper setting of the encryption mask so that the data can be successfully accessed when SME is active.Quoted 6 lines
Reviewed-by Borislav Petkov <[email protected]>Signed-off-by Tom Lendacky <[email protected]>--- arch/x86/kernel/mpparse.c | 98 +++++++++++++++++++++++++++++++++-------------- 1 file changed, 70 insertions(+), 28 deletions(-)Hi there,
today I played a bit with crosvm [0] and noticed that 4.14-rc7 doesn't boot. git-bisect pointed to this patch, and reverting it indeed gets things working again.
Quoted 5 lines
Quoted 1 line
Anybody has an idea of why this could be?
If you send me your kernel config I'll see if I can reproduce the issue and debug it.
x86_64_defconfig should be enough. I have pasted my dev env instructions here in case they help:
http://blog.tomeuvizoso.net/2017/11/experiments-with-crosvm_6.html
Thanks,
Tomeu
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
PATCH v10 21/38 x86/mm: Add support to access persistent memory in the clear
In reply to Tom LendackyPersistent memory is expected to persist across reboots. The encryption key used by SME will change across reboots which will result in corrupted persistent memory. Persistent memory is handed out by block devices through memory remapping functions, so be sure not to map this memory as encrypted.
--- arch/x86/mm/ioremap.c | 31 ++++++++++++++++++++++++++++++- 1 file changed, 30 insertions(+), 1 deletion(-)
arch/x86/mm/ioremap.c +30 -1
@@ -424,17 +424,46 @@ void unxlate_dev_mem_ptr(phys_addr_t phys, void *addr)* Examine the physical address to determine if it is an area of memory * that should be mapped decrypted. If the memory is not part of the * kernel usable area it was accessed and created decrypted, so these -* areas should be mapped decrypted. +* areas should be mapped decrypted. And since the encryption key can +* change across reboots, persistent memory should also be mapped +* decrypted. */ static bool memremap_should_map_decrypted (resource_size_t phys_addr,unsigned long size) { +int is_pmem; + +/* +* Check if the address is part of a persistent memory region. +* This check covers areas added by E820, EFI and ACPI. +*/ + is_pmem =region_intersects (phys_addr, size,IORESOURCE_MEM , +IORES_DESC_PERSISTENT_MEMORY ); +if (is_pmem !=REGION_DISJOINT ) +return true; + +/* +* Check if the non-volatile attribute is set for an EFI +* reserved area. +*/ +if (efi_enabled (EFI_BOOT )) { +switch (efi_mem_type (phys_addr)) { +case EFI_RESERVED_TYPE : +if (efi_mem_attributes (phys_addr) &EFI_MEMORY_NV ) +return true; +break ; +default : +break ; + } + } +/* Check if the address is outside kernel usable area */ switch (e820__get_entry_type (phys_addr, phys_addr + size -1 )) {case E820_TYPE_RESERVED :case E820_TYPE_ACPI :case E820_TYPE_NVS :case E820_TYPE_UNUSABLE : +case E820_TYPE_PRAM :return true;default :break ;
Signature · 7 lines
1.9.1 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
tip-bot for Tom Lendacky
merge bot[tip:x86/mm] x86/mm: Add support to access persistent memory in the clear
x86/mm: Add support to access persistent memory in the clear
Commit-ID: 1de328628cd06b5efff9195b57bdc1a64680814d Gitweb: http://git.kernel.org/tip/1de328628cd06b5efff9195b57bdc1a64680814d Author: Tom Lendacky <[email protected]> AuthorDate: Mon, 17 Jul 2017 16:10:18 -0500 Committer: Ingo Molnar <[email protected]> CommitDate: Tue, 18 Jul 2017 11:38:02 +0200
x86/mm: Add support to access persistent memory in the clear
Persistent memory is expected to persist across reboots. The encryption key used by SME will change across reboots which will result in corrupted persistent memory. Persistent memory is handed out by block devices through memory remapping functions, so be sure not to map this memory as encrypted.
--- arch/x86/mm/ioremap.c | 31 ++++++++++++++++++++++++++++++- 1 file changed, 30 insertions(+), 1 deletion(-)
arch/x86/mm/ioremap.c +30 -1
@@ -424,17 +424,46 @@ void unxlate_dev_mem_ptr(phys_addr_t phys, void *addr)* Examine the physical address to determine if it is an area of memory * that should be mapped decrypted. If the memory is not part of the * kernel usable area it was accessed and created decrypted, so these -* areas should be mapped decrypted. +* areas should be mapped decrypted. And since the encryption key can +* change across reboots, persistent memory should also be mapped +* decrypted. */ static bool memremap_should_map_decrypted (resource_size_t phys_addr,unsigned long size) { +int is_pmem; + +/* +* Check if the address is part of a persistent memory region. +* This check covers areas added by E820, EFI and ACPI. +*/ + is_pmem =region_intersects (phys_addr, size,IORESOURCE_MEM , +IORES_DESC_PERSISTENT_MEMORY ); +if (is_pmem !=REGION_DISJOINT ) +return true; + +/* +* Check if the non-volatile attribute is set for an EFI +* reserved area. +*/ +if (efi_enabled (EFI_BOOT )) { +switch (efi_mem_type (phys_addr)) { +case EFI_RESERVED_TYPE : +if (efi_mem_attributes (phys_addr) &EFI_MEMORY_NV ) +return true; +break ; +default : +break ; + } + } +/* Check if the address is outside kernel usable area */ switch (e820__get_entry_type (phys_addr, phys_addr + size -1 )) {case E820_TYPE_RESERVED :case E820_TYPE_ACPI :case E820_TYPE_NVS :case E820_TYPE_UNUSABLE : +case E820_TYPE_PRAM :return true;default :break ;
PATCH v10 22/38 x86/mm: Add support for changing the memory encryption attribute
In reply to Tom LendackyAdd support for changing the memory encryption attribute for one or more memory pages. This will be useful when we have to change the AP trampoline area to not be encrypted. Or when we need to change the SWIOTLB area to not be encrypted in support of devices that can't support the encryption mask range.
--- arch/x86/include/asm/set_memory.h | 3 ++ arch/x86/mm/pageattr.c | 62 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 65 insertions(+)
arch/x86/include/asm/set_memory.h +3 -0
@@ -11,6 +11,7 @@* Executability : eXeutable, NoteXecutable * Read/Write : ReadOnly, ReadWrite * Presence : NotPresent +* Encryption : Encrypted, Decrypted * * Within a category, the attributes are mutually exclusive. *
@@ -42,6 +43,8 @@int set_memory_wb (unsigned long addr,int numpages);int set_memory_np (unsigned long addr,int numpages);int set_memory_4k (unsigned long addr,int numpages); +int set_memory_encrypted (unsigned long addr,int numpages); +int set_memory_decrypted (unsigned long addr,int numpages);int set_memory_array_uc (unsigned long *addr,int addrinarray);int set_memory_array_wc (unsigned long *addr,int addrinarray);
arch/x86/mm/pageattr.c +62 -0
68 lines not on this page · raw message
Signature · 7 lines
1.9.1 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
tip-bot for Tom Lendacky
merge bot[tip:x86/mm] x86/mm: Add support for changing the memory encryption attribute
x86/mm: Add support for changing the memory encryption attribute
Commit-ID: 77bd2342d4304bda7896c953d424d15deb314ca3 Gitweb: http://git.kernel.org/tip/77bd2342d4304bda7896c953d424d15deb314ca3 Author: Tom Lendacky <[email protected]> AuthorDate: Mon, 17 Jul 2017 16:10:19 -0500 Committer: Ingo Molnar <[email protected]> CommitDate: Tue, 18 Jul 2017 11:38:02 +0200
x86/mm: Add support for changing the memory encryption attribute
Add support for changing the memory encryption attribute for one or more memory pages. This will be useful when we have to change the AP trampoline area to not be encrypted. Or when we need to change the SWIOTLB area to not be encrypted in support of devices that can't support the encryption mask range.
--- arch/x86/include/asm/set_memory.h | 3 ++ arch/x86/mm/pageattr.c | 62 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 65 insertions(+)
arch/x86/include/asm/set_memory.h +3 -0
@@ -11,6 +11,7 @@* Executability : eXeutable, NoteXecutable * Read/Write : ReadOnly, ReadWrite * Presence : NotPresent +* Encryption : Encrypted, Decrypted * * Within a category, the attributes are mutually exclusive. *
@@ -42,6 +43,8 @@ int set_memory_wt(unsigned long addr, int numpages);int set_memory_wb (unsigned long addr,int numpages);int set_memory_np (unsigned long addr,int numpages);int set_memory_4k (unsigned long addr,int numpages); +int set_memory_encrypted (unsigned long addr,int numpages); +int set_memory_decrypted (unsigned long addr,int numpages);int set_memory_array_uc (unsigned long *addr,int addrinarray);int set_memory_array_wc (unsigned long *addr,int addrinarray);
arch/x86/mm/pageattr.c +62 -0
68 lines not on this page · raw message
PATCH v10 23/38 x86/realmode: Decrypt trampoline area if memory encryption is active
In reply to Tom LendackyWhen Secure Memory Encryption is enabled, the trampoline area must not be encrypted. A CPU running in real mode will not be able to decrypt memory that has been encrypted because it will not be able to use addresses with the memory encryption mask.
--- arch/x86/realmode/init.c | 8 ++++++++ 1 file changed, 8 insertions(+)
arch/x86/realmode/init.c +8 -0
@@ -1,6 +1,7 @@#include <linux/io.h> #include <linux/slab.h> #include <linux/memblock.h> +#include <linux/mem_encrypt.h> #include <asm/set_memory.h> #include <asm/pgtable.h>
@@ -59,6 +60,13 @@ static void __init setup_real_mode(void) base = (unsigned char *)real_mode_header; +/* +* If SME is active, the trampoline area will need to be in +* decrypted memory in order to bring up other processors +* successfully. +*/ +set_memory_decrypted ((unsigned long )base, size >>PAGE_SHIFT ); +memcpy (base, real_mode_blob, size); phys_base =__pa (base);
Signature · 7 lines
1.9.1 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
tip-bot for Tom Lendacky
merge bot[tip:x86/mm] x86/realmode: Decrypt trampoline area if memory encryption is active
x86/realmode: Decrypt trampoline area if memory encryption is active
Commit-ID: 163ea3c83aeeb3908a51162c79cb3a7c374d92b4 Gitweb: http://git.kernel.org/tip/163ea3c83aeeb3908a51162c79cb3a7c374d92b4 Author: Tom Lendacky <[email protected]> AuthorDate: Mon, 17 Jul 2017 16:10:20 -0500 Committer: Ingo Molnar <[email protected]> CommitDate: Tue, 18 Jul 2017 11:38:03 +0200
x86/realmode: Decrypt trampoline area if memory encryption is active
When Secure Memory Encryption is enabled, the trampoline area must not be encrypted. A CPU running in real mode will not be able to decrypt memory that has been encrypted because it will not be able to use addresses with the memory encryption mask.
--- arch/x86/realmode/init.c | 8 ++++++++ 1 file changed, 8 insertions(+)
arch/x86/realmode/init.c +8 -0
@@ -1,6 +1,7 @@#include <linux/io.h> #include <linux/slab.h> #include <linux/memblock.h> +#include <linux/mem_encrypt.h> #include <asm/set_memory.h> #include <asm/pgtable.h>
@@ -59,6 +60,13 @@ static void __init setup_real_mode(void) base = (unsigned char *)real_mode_header; +/* +* If SME is active, the trampoline area will need to be in +* decrypted memory in order to bring up other processors +* successfully. +*/ +set_memory_decrypted ((unsigned long )base, size >>PAGE_SHIFT ); +memcpy (base, real_mode_blob, size); phys_base =__pa (base);
PATCH v10 24/38 x86, swiotlb: Add memory encryption support
In reply to Tom LendackySince DMA addresses will effectively look like 48-bit addresses when the memory encryption mask is set, SWIOTLB is needed if the DMA mask of the device performing the DMA does not support 48-bits. SWIOTLB will be initialized to create decrypted bounce buffers for use by these devices.
--- arch/x86/include/asm/dma-mapping.h | 5 ++-- arch/x86/include/asm/mem_encrypt.h | 5 ++++ arch/x86/kernel/pci-dma.c | 11 +++++--- arch/x86/kernel/pci-nommu.c | 2 +- arch/x86/kernel/pci-swiotlb.c | 15 +++++++++-- arch/x86/mm/mem_encrypt.c | 22 ++++++++++++++++ include/linux/swiotlb.h | 1 + init/main.c | 10 +++++++ lib/swiotlb.c | 54 ++++++++++++++++++++++++++++++++------ 9 files changed, 108 insertions(+), 17 deletions(-)
arch/x86/include/asm/dma-mapping.h +3 -2
@@ -12,6 +12,7 @@#include <asm/io.h> #include <asm/swiotlb.h> #include <linux/dma-contiguous.h> +#include <linux/mem_encrypt.h> #ifdef CONFIG_ISA # define ISA_DMA_BIT_MASK DMA_BIT_MASK(24)
@@ -57,12 +58,12 @@ static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)static inline dma_addr_t phys_to_dma (struct device *dev,phys_addr_t paddr) { -return paddr; +return __sme_set (paddr); }static inline phys_addr_t dma_to_phys (struct device *dev,dma_addr_t daddr) { -return daddr; +return __sme_clr (daddr); }#endif /* CONFIG_X86_DMA_REMAP */
arch/x86/include/asm/mem_encrypt.h +5 -0
@@ -34,6 +34,11 @@ void __init sme_early_decrypt(resource_size_t paddr,void __init sme_encrypt_kernel (void );void __init sme_enable (void ); +/* Architecture __weak replacement functions */ +void __init mem_encrypt_init (void ); + +void swiotlb_set_mem_attributes (void *vaddr,unsigned long size); +#else /* !CONFIG_AMD_MEM_ENCRYPT */ #define sme_me_mask 0UL
arch/x86/kernel/pci-dma.c +7 -4
@@ -93,9 +93,12 @@ void *dma_generic_alloc_coherent(struct device *dev, size_t size,if (gfpflags_allow_blocking (flag)) { page =dma_alloc_from_contiguous (dev, count,get_order (size), flag); -if (page &&page_to_phys (page) + size > dma_mask) { -dma_release_from_contiguous (dev, page, count); - page =NULL ; +if (page) { + addr =phys_to_dma (dev,page_to_phys (page)); +if (addr + size > dma_mask) { +dma_release_from_contiguous (dev, page, count); + page =NULL ; + } } }/* fallback */
@@ -104,7 +107,7 @@ void *dma_generic_alloc_coherent(struct device *dev, size_t size,if (!page)return NULL ; - addr =page_to_phys (page); + addr =phys_to_dma (dev,page_to_phys (page));if (addr + size > dma_mask) {__free_pages (page,get_order (size));
arch/x86/kernel/pci-nommu.c +1 -1
@@ -32,7 +32,7 @@ static dma_addr_t nommu_map_page(struct device *dev, struct page *page, enum dma_data_direction dir, unsigned long attrs) { -dma_addr_t bus =page_to_phys (page) + offset; +dma_addr_t bus =phys_to_dma (dev,page_to_phys (page)) + offset;WARN_ON (size ==0 );if (!check_addr ("map_single" , dev, bus, size))return NOMMU_MAPPING_ERROR ;
arch/x86/kernel/pci-swiotlb.c +13 -2
@@ -6,12 +6,14 @@#include <linux/swiotlb.h> #include <linux/bootmem.h> #include <linux/dma-mapping.h> +#include <linux/mem_encrypt.h> #include <asm/iommu.h> #include <asm/swiotlb.h> #include <asm/dma.h> #include <asm/xen/swiotlb-xen.h> #include <asm/iommu_table.h> +int swiotlb__read_mostly ; void *x86_swiotlb_alloc_coherent(struct device *hwdev, size_t size,
@@ -79,8 +81,8 @@ int __init pci_swiotlb_detect_override(void) pci_swiotlb_late_init);/* -* if 4GB or more detected (and iommu=off not set) return 1 -* and set swiotlb to 1. +* If 4GB or more detected (and iommu=off not set) or if SME is active +* then set swiotlb to 1 and return 1. */ int __init pci_swiotlb_detect_4gb (void ) {
@@ -89,6 +91,15 @@ int __init pci_swiotlb_detect_4gb(void)if (!no_iommu && max_possible_pfn >MAX_DMA32_PFN ) swiotlb =1 ;#endif + +/* +* If SME is active then swiotlb will be set to 1 so that bounce +* buffers are allocated and used for devices that do not support +* the addressing range required for the encryption mask. +*/ +if (sme_active ()) + swiotlb =1 ; +return swiotlb; } IOMMU_INIT(pci_swiotlb_detect_4gb,
arch/x86/mm/mem_encrypt.c +22 -0
@@ -13,11 +13,14 @@#include <linux/linkage.h> #include <linux/init.h> #include <linux/mm.h> +#include <linux/dma-mapping.h> +#include <linux/swiotlb.h> #include <asm/tlbflush.h> #include <asm/fixmap.h> #include <asm/setup.h> #include <asm/bootparam.h> +#include <asm/set_memory.h> /* * Since SME related variables are set early in the boot process they must
@@ -177,6 +180,25 @@ void __init sme_early_init(void) protection_map[i] =pgprot_encrypted (protection_map[i]); } +/* Architecture __weak replacement functions */ +void __init mem_encrypt_init (void ) +{ +if (!sme_me_mask) +return ; + +/* Call into SWIOTLB to update the SWIOTLB DMA buffers */ +swiotlb_update_mem_attributes (); +} + +void swiotlb_set_mem_attributes (void *vaddr,unsigned long size) +{ +WARN (PAGE_ALIGN (size) != size, +"size is not page-aligned (%#lx)\n" , size); + +/* Make the SWIOTLB buffer area decrypted */ +set_memory_decrypted ((unsigned long )vaddr, size >>PAGE_SHIFT ); +} +void __init sme_encrypt_kernel (void ) { }
include/linux/swiotlb.h +1 -0
@@ -35,6 +35,7 @@ enum swiotlb_force {extern unsigned long swiotlb_nr_tbl (void );unsigned long swiotlb_size_or_default (void );extern int swiotlb_late_init_with_tbl (char *tlb,unsigned long nslabs); +extern void __init swiotlb_update_mem_attributes (void );/* * Enumeration for sync targets
init/main.c +10 -0
@@ -488,6 +488,8 @@ void __init __weak thread_stack_cache_init(void) }#endif +void __init __weak mem_encrypt_init (void ) { } +/* * Set up kernel memory allocators */
@@ -641,6 +643,14 @@ asmlinkage __visible void __init start_kernel(void)*/ locking_selftest (); +/* +* This needs to be called before any devices perform DMA +* operations that might use the SWIOTLB bounce buffers. It will +* mark the bounce buffers as decrypted so that their usage will +* not cause "plain-text" data to be decrypted when accessed. +*/ +mem_encrypt_init (); +#ifdef CONFIG_BLK_DEV_INITRD if (initrd_start && !initrd_below_start_ok &&page_to_pfn (virt_to_page ((void *)initrd_start)) < min_low_pfn) {
lib/swiotlb.c +46 -8
127 lines not on this page · raw message
Signature · 1 line
1.9.1
tip-bot for Tom Lendacky
merge bot[tip:x86/mm] x86, swiotlb: Add memory encryption support
x86, swiotlb: Add memory encryption support
Commit-ID: c7753208a94c73d5beb1e4bd843081d6dc7d4678 Gitweb: http://git.kernel.org/tip/c7753208a94c73d5beb1e4bd843081d6dc7d4678 Author: Tom Lendacky <[email protected]> AuthorDate: Mon, 17 Jul 2017 16:10:21 -0500 Committer: Ingo Molnar <[email protected]> CommitDate: Tue, 18 Jul 2017 11:38:03 +0200
x86, swiotlb: Add memory encryption support
Since DMA addresses will effectively look like 48-bit addresses when the memory encryption mask is set, SWIOTLB is needed if the DMA mask of the device performing the DMA does not support 48-bits. SWIOTLB will be initialized to create decrypted bounce buffers for use by these devices.
--- arch/x86/include/asm/dma-mapping.h | 5 ++-- arch/x86/include/asm/mem_encrypt.h | 5 ++++ arch/x86/kernel/pci-dma.c | 11 +++++--- arch/x86/kernel/pci-nommu.c | 2 +- arch/x86/kernel/pci-swiotlb.c | 15 +++++++++-- arch/x86/mm/mem_encrypt.c | 22 ++++++++++++++++ include/linux/swiotlb.h | 1 + init/main.c | 10 +++++++ lib/swiotlb.c | 54 ++++++++++++++++++++++++++++++++------ 9 files changed, 108 insertions(+), 17 deletions(-)
arch/x86/include/asm/dma-mapping.h +3 -2
@@ -12,6 +12,7 @@#include <asm/io.h> #include <asm/swiotlb.h> #include <linux/dma-contiguous.h> +#include <linux/mem_encrypt.h> #ifdef CONFIG_ISA # define ISA_DMA_BIT_MASK DMA_BIT_MASK(24)
@@ -57,12 +58,12 @@ static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)static inline dma_addr_t phys_to_dma (struct device *dev,phys_addr_t paddr) { -return paddr; +return __sme_set (paddr); }static inline phys_addr_t dma_to_phys (struct device *dev,dma_addr_t daddr) { -return daddr; +return __sme_clr (daddr); }#endif /* CONFIG_X86_DMA_REMAP */
arch/x86/include/asm/mem_encrypt.h +5 -0
@@ -34,6 +34,11 @@ void __init sme_early_init(void);void __init sme_encrypt_kernel (void );void __init sme_enable (void ); +/* Architecture __weak replacement functions */ +void __init mem_encrypt_init (void ); + +void swiotlb_set_mem_attributes (void *vaddr,unsigned long size); +#else /* !CONFIG_AMD_MEM_ENCRYPT */ #define sme_me_mask 0UL
arch/x86/kernel/pci-dma.c +7 -4
@@ -93,9 +93,12 @@ again:if (gfpflags_allow_blocking (flag)) { page =dma_alloc_from_contiguous (dev, count,get_order (size), flag); -if (page &&page_to_phys (page) + size > dma_mask) { -dma_release_from_contiguous (dev, page, count); - page =NULL ; +if (page) { + addr =phys_to_dma (dev,page_to_phys (page)); +if (addr + size > dma_mask) { +dma_release_from_contiguous (dev, page, count); + page =NULL ; + } } }/* fallback */
@@ -104,7 +107,7 @@ again:if (!page)return NULL ; - addr =page_to_phys (page); + addr =phys_to_dma (dev,page_to_phys (page));if (addr + size > dma_mask) {__free_pages (page,get_order (size));
arch/x86/kernel/pci-nommu.c +1 -1
@@ -32,7 +32,7 @@ static dma_addr_t nommu_map_page(struct device *dev, struct page *page, enum dma_data_direction dir, unsigned long attrs) { -dma_addr_t bus =page_to_phys (page) + offset; +dma_addr_t bus =phys_to_dma (dev,page_to_phys (page)) + offset;WARN_ON (size ==0 );if (!check_addr ("map_single" , dev, bus, size))return NOMMU_MAPPING_ERROR ;
arch/x86/kernel/pci-swiotlb.c +13 -2
@@ -6,12 +6,14 @@#include <linux/swiotlb.h> #include <linux/bootmem.h> #include <linux/dma-mapping.h> +#include <linux/mem_encrypt.h> #include <asm/iommu.h> #include <asm/swiotlb.h> #include <asm/dma.h> #include <asm/xen/swiotlb-xen.h> #include <asm/iommu_table.h> +int swiotlb__read_mostly ; void *x86_swiotlb_alloc_coherent(struct device *hwdev, size_t size,
@@ -79,8 +81,8 @@ IOMMU_INIT_FINISH(pci_swiotlb_detect_override, pci_swiotlb_late_init);/* -* if 4GB or more detected (and iommu=off not set) return 1 -* and set swiotlb to 1. +* If 4GB or more detected (and iommu=off not set) or if SME is active +* then set swiotlb to 1 and return 1. */ int __init pci_swiotlb_detect_4gb (void ) {
@@ -89,6 +91,15 @@ int __init pci_swiotlb_detect_4gb(void)if (!no_iommu && max_possible_pfn >MAX_DMA32_PFN ) swiotlb =1 ;#endif + +/* +* If SME is active then swiotlb will be set to 1 so that bounce +* buffers are allocated and used for devices that do not support +* the addressing range required for the encryption mask. +*/ +if (sme_active ()) + swiotlb =1 ; +return swiotlb; } IOMMU_INIT(pci_swiotlb_detect_4gb,
arch/x86/mm/mem_encrypt.c +22 -0
@@ -13,11 +13,14 @@#include <linux/linkage.h> #include <linux/init.h> #include <linux/mm.h> +#include <linux/dma-mapping.h> +#include <linux/swiotlb.h> #include <asm/tlbflush.h> #include <asm/fixmap.h> #include <asm/setup.h> #include <asm/bootparam.h> +#include <asm/set_memory.h> /* * Since SME related variables are set early in the boot process they must
@@ -177,6 +180,25 @@ void __init sme_early_init(void) protection_map[i] =pgprot_encrypted (protection_map[i]); } +/* Architecture __weak replacement functions */ +void __init mem_encrypt_init (void ) +{ +if (!sme_me_mask) +return ; + +/* Call into SWIOTLB to update the SWIOTLB DMA buffers */ +swiotlb_update_mem_attributes (); +} + +void swiotlb_set_mem_attributes (void *vaddr,unsigned long size) +{ +WARN (PAGE_ALIGN (size) != size, +"size is not page-aligned (%#lx)\n" , size); + +/* Make the SWIOTLB buffer area decrypted */ +set_memory_decrypted ((unsigned long )vaddr, size >>PAGE_SHIFT ); +} +void __init sme_encrypt_kernel (void ) { }
include/linux/swiotlb.h +1 -0
@@ -35,6 +35,7 @@ int swiotlb_init_with_tbl(char *tlb, unsigned long nslabs, int verbose);extern unsigned long swiotlb_nr_tbl (void );unsigned long swiotlb_size_or_default (void );extern int swiotlb_late_init_with_tbl (char *tlb,unsigned long nslabs); +extern void __init swiotlb_update_mem_attributes (void );/* * Enumeration for sync targets
init/main.c +10 -0
@@ -488,6 +488,8 @@ void __init __weak thread_stack_cache_init(void) }#endif +void __init __weak mem_encrypt_init (void ) { } +/* * Set up kernel memory allocators */
@@ -641,6 +643,14 @@ asmlinkage __visible void __init start_kernel(void)*/ locking_selftest (); +/* +* This needs to be called before any devices perform DMA +* operations that might use the SWIOTLB bounce buffers. It will +* mark the bounce buffers as decrypted so that their usage will +* not cause "plain-text" data to be decrypted when accessed. +*/ +mem_encrypt_init (); +#ifdef CONFIG_BLK_DEV_INITRD if (initrd_start && !initrd_below_start_ok &&page_to_pfn (virt_to_page ((void *)initrd_start)) < min_low_pfn) {
lib/swiotlb.c +46 -8
127 lines not on this page · raw message
PATCH v10 25/38 swiotlb: Add warnings for use of bounce buffers with SME
In reply to Tom LendackyAdd warnings to let the user know when bounce buffers are being used for DMA when SME is active. Since the bounce buffers are not in encrypted memory, these notifications are to allow the user to determine some appropriate action - if necessary. Actions can range from utilizing an IOMMU, replacing the device with another device that can support 64-bit DMA, ignoring the message if the device isn't used much, etc.
--- include/linux/dma-mapping.h | 13 +++++++++++++ lib/swiotlb.c | 3 +++ 2 files changed, 16 insertions(+)
include/linux/dma-mapping.h +13 -0
@@ -10,6 +10,7 @@#include <linux/scatterlist.h> #include <linux/kmemcheck.h> #include <linux/bug.h> +#include <linux/mem_encrypt.h> /** * List of possible attributes associated with a DMA mapping. The semantics
@@ -548,6 +549,12 @@ static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)return 0 ; } +static inline void dma_check_mask (struct device *dev,u64 mask) +{ +if (sme_active () && (mask < (((u64 )sme_get_me_mask () <<1 ) -1 ))) +dev_warn (dev,"SME is active, device will require DMA bounce buffers\n" ); +} +static inline int dma_supported (struct device *dev,u64 mask) {const struct dma_map_ops *ops =get_dma_ops (dev);
@@ -564,6 +571,9 @@ static inline int dma_set_mask(struct device *dev, u64 mask) {if (!dev->dma_mask || !dma_supported (dev, mask))return -EIO ; + +dma_check_mask (dev, mask); + *dev->dma_mask = mask;return 0 ; }
@@ -583,6 +593,9 @@ static inline int dma_set_coherent_mask(struct device *dev, u64 mask) {if (!dma_supported (dev, mask))return -EIO ; + +dma_check_mask (dev, mask); + dev->coherent_dma_mask = mask;return 0 ; }
lib/swiotlb.c +3 -0
@@ -507,6 +507,9 @@ phys_addr_t swiotlb_tbl_map_single(struct device *hwdev,if (no_iotlb_memory)panic ("Can not allocate SWIOTLB buffer earlier and can't now provide you with the DMA bounce buffer" ); +if (sme_active ()) +pr_warn_once ("SME is active and system is using DMA bounce buffers\n" ); + mask =dma_get_seg_boundary (hwdev); tbl_dma_addr &= mask;
Signature · 1 line
1.9.1
tip-bot for Tom Lendacky
merge bot[tip:x86/mm] swiotlb: Add warnings for use of bounce buffers with SME
swiotlb: Add warnings for use of bounce buffers with SME
Commit-ID: 648babb7078c6310d2af5b8aa01f086030916968 Gitweb: http://git.kernel.org/tip/648babb7078c6310d2af5b8aa01f086030916968 Author: Tom Lendacky <[email protected]> AuthorDate: Mon, 17 Jul 2017 16:10:22 -0500 Committer: Ingo Molnar <[email protected]> CommitDate: Tue, 18 Jul 2017 11:38:03 +0200
swiotlb: Add warnings for use of bounce buffers with SME
Add warnings to let the user know when bounce buffers are being used for DMA when SME is active. Since the bounce buffers are not in encrypted memory, these notifications are to allow the user to determine some appropriate action - if necessary. Actions can range from utilizing an IOMMU, replacing the device with another device that can support 64-bit DMA, ignoring the message if the device isn't used much, etc.
--- include/linux/dma-mapping.h | 13 +++++++++++++ lib/swiotlb.c | 3 +++ 2 files changed, 16 insertions(+)
include/linux/dma-mapping.h +13 -0
@@ -10,6 +10,7 @@#include <linux/scatterlist.h> #include <linux/kmemcheck.h> #include <linux/bug.h> +#include <linux/mem_encrypt.h> /** * List of possible attributes associated with a DMA mapping. The semantics
@@ -548,6 +549,12 @@ static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)return 0 ; } +static inline void dma_check_mask (struct device *dev,u64 mask) +{ +if (sme_active () && (mask < (((u64 )sme_get_me_mask () <<1 ) -1 ))) +dev_warn (dev,"SME is active, device will require DMA bounce buffers\n" ); +} +static inline int dma_supported (struct device *dev,u64 mask) {const struct dma_map_ops *ops =get_dma_ops (dev);
@@ -564,6 +571,9 @@ static inline int dma_set_mask(struct device *dev, u64 mask) {if (!dev->dma_mask || !dma_supported (dev, mask))return -EIO ; + +dma_check_mask (dev, mask); + *dev->dma_mask = mask;return 0 ; }
@@ -583,6 +593,9 @@ static inline int dma_set_coherent_mask(struct device *dev, u64 mask) {if (!dma_supported (dev, mask))return -EIO ; + +dma_check_mask (dev, mask); + dev->coherent_dma_mask = mask;return 0 ; }
lib/swiotlb.c +3 -0
@@ -507,6 +507,9 @@ phys_addr_t swiotlb_tbl_map_single(struct device *hwdev,if (no_iotlb_memory)panic ("Can not allocate SWIOTLB buffer earlier and can't now provide you with the DMA bounce buffer" ); +if (sme_active ()) +pr_warn_once ("SME is active and system is using DMA bounce buffers\n" ); + mask =dma_get_seg_boundary (hwdev); tbl_dma_addr &= mask;
PATCH v10 26/38 x86/CPU/AMD: Make the microcode level available earlier in the boot
In reply to Tom LendackyMove the setting of the cpuinfo_x86.microcode field from amd_init() to early_amd_init() so that it is available earlier in the boot process. This avoids having to read MSR_AMD64_PATCH_LEVEL directly during early boot.
--- arch/x86/kernel/cpu/amd.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
arch/x86/kernel/cpu/amd.c +4 -4
@@ -548,8 +548,12 @@ static void bsp_init_amd(struct cpuinfo_x86 *c)static void early_init_amd (struct cpuinfo_x86 *c) { +u32 dummy; +early_init_amd_mc (c); +rdmsr_safe (MSR_AMD64_PATCH_LEVEL , &c->microcode, &dummy); +/* * c->x86_power is 8000_0007 edx. Bit 8 is TSC runs at constant rate * with P/T states and does not stop in deep C-states
@@ -751,8 +755,6 @@ static void init_amd_bd(struct cpuinfo_x86 *c)static void init_amd (struct cpuinfo_x86 *c) { -u32 dummy; -early_init_amd (c);/*
@@ -814,8 +816,6 @@ static void init_amd(struct cpuinfo_x86 *c)if (c->x86 >0x11 )set_cpu_cap (c,X86_FEATURE_ARAT ); -rdmsr_safe (MSR_AMD64_PATCH_LEVEL , &c->microcode, &dummy); -/* 3DNow or LM implies PREFETCHW */ if (!cpu_has (c,X86_FEATURE_3DNOWPREFETCH ))if (cpu_has (c,X86_FEATURE_3DNOW ) ||cpu_has (c,X86_FEATURE_LM ))
Signature · 7 lines
1.9.1 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
tip-bot for Tom Lendacky
merge bot[tip:x86/mm] x86/cpu/AMD: Make the microcode level available earlier in the boot
x86/cpu/AMD: Make the microcode level available earlier in the boot
Commit-ID: f655e6e6b992a2fb0d0334db2620607b98df39e7 Gitweb: http://git.kernel.org/tip/f655e6e6b992a2fb0d0334db2620607b98df39e7 Author: Tom Lendacky <[email protected]> AuthorDate: Mon, 17 Jul 2017 16:10:23 -0500 Committer: Ingo Molnar <[email protected]> CommitDate: Tue, 18 Jul 2017 11:38:03 +0200
x86/cpu/AMD: Make the microcode level available earlier in the boot
Move the setting of the cpuinfo_x86.microcode field from amd_init() to early_amd_init() so that it is available earlier in the boot process. This avoids having to read MSR_AMD64_PATCH_LEVEL directly during early boot.
--- arch/x86/kernel/cpu/amd.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
arch/x86/kernel/cpu/amd.c +4 -4
@@ -547,8 +547,12 @@ static void bsp_init_amd(struct cpuinfo_x86 *c)static void early_init_amd (struct cpuinfo_x86 *c) { +u32 dummy; +early_init_amd_mc (c); +rdmsr_safe (MSR_AMD64_PATCH_LEVEL , &c->microcode, &dummy); +/* * c->x86_power is 8000_0007 edx. Bit 8 is TSC runs at constant rate * with P/T states and does not stop in deep C-states
@@ -750,8 +754,6 @@ static void init_amd_bd(struct cpuinfo_x86 *c)static void init_amd (struct cpuinfo_x86 *c) { -u32 dummy; -early_init_amd (c);/*
@@ -813,8 +815,6 @@ static void init_amd(struct cpuinfo_x86 *c)if (c->x86 >0x11 )set_cpu_cap (c,X86_FEATURE_ARAT ); -rdmsr_safe (MSR_AMD64_PATCH_LEVEL , &c->microcode, &dummy); -/* 3DNow or LM implies PREFETCHW */ if (!cpu_has (c,X86_FEATURE_3DNOWPREFETCH ))if (cpu_has (c,X86_FEATURE_3DNOW ) ||cpu_has (c,X86_FEATURE_LM ))
PATCH v10 27/38 iommu/amd: Allow the AMD IOMMU to work with memory encryption
In reply to Tom LendackyThe IOMMU is programmed with physical addresses for the various tables and buffers that are used to communicate between the device and the driver. When the driver allocates this memory it is encrypted. In order for the IOMMU to access the memory as encrypted the encryption mask needs to be included in these physical addresses during configuration.
The PTE entries created by the IOMMU should also include the encryption mask so that when the device behind the IOMMU performs a DMA, the DMA will be performed to encrypted memory.
--- drivers/iommu/amd_iommu.c | 30 ++++++++++++++++-------------- drivers/iommu/amd_iommu_init.c | 34 ++++++++++++++++++++++++++++------ drivers/iommu/amd_iommu_proto.h | 10 ++++++++++ drivers/iommu/amd_iommu_types.h | 2 +- 4 files changed, 55 insertions(+), 21 deletions(-)
drivers/iommu/amd_iommu.c +16 -14
@@ -575,7 +575,7 @@ static void dump_dte_entry(u16 devid)static void dump_command (unsigned long phys_addr) { -struct iommu_cmd *cmd =phys_to_virt (phys_addr); +struct iommu_cmd *cmd =iommu_phys_to_virt (phys_addr);int i;for (i =0 ; i <4 ; ++i)
@@ -919,11 +919,13 @@ static void copy_cmd_to_buffer(struct amd_iommu *iommu,static void build_completion_wait (struct iommu_cmd *cmd,u64 address) { +u64 paddr =iommu_virt_to_phys ((void *)address); +WARN_ON (address &0x7ULL );memset (cmd,0 ,sizeof (*cmd)); - cmd->data[0 ] =lower_32_bits (__pa (address)) |CMD_COMPL_WAIT_STORE_MASK ; - cmd->data[1 ] =upper_32_bits (__pa (address)); + cmd->data[0 ] =lower_32_bits (paddr) |CMD_COMPL_WAIT_STORE_MASK ; + cmd->data[1 ] =upper_32_bits (paddr); cmd->data[2 ] =1 ;CMD_SET_TYPE (cmd,CMD_COMPL_WAIT ); }
@@ -1383,7 +1385,7 @@ static bool increase_address_space(struct protection_domain *domain,return false; *pte =PM_LEVEL_PDE (domain->mode, -virt_to_phys (domain->pt_root)); +iommu_virt_to_phys (domain->pt_root)); domain->pt_root = pte; domain->mode +=1 ; domain->updated = true;
@@ -1420,7 +1422,7 @@ static u64 *alloc_pte(struct protection_domain *domain,if (!page)return NULL ; - __npte =PM_LEVEL_PDE (level,virt_to_phys (page)); + __npte =PM_LEVEL_PDE (level,iommu_virt_to_phys (page));/* pte could have been changed somewhere. */ if (cmpxchg64 (pte, __pte, __npte) != __pte) {
@@ -1536,10 +1538,10 @@ static int iommu_map_page(struct protection_domain *dom,return -EBUSY ;if (count >1 ) { - __pte =PAGE_SIZE_PTE (phys_addr, page_size); + __pte =PAGE_SIZE_PTE (__sme_set (phys_addr), page_size); __pte |=PM_LEVEL_ENC (7 ) |IOMMU_PTE_P |IOMMU_PTE_FC ; }else - __pte = phys_addr |IOMMU_PTE_P |IOMMU_PTE_FC ; + __pte =__sme_set (phys_addr) |IOMMU_PTE_P |IOMMU_PTE_FC ;if (prot &IOMMU_PROT_IR ) __pte |=IOMMU_PTE_IR ;
@@ -1755,7 +1757,7 @@ static void free_gcr3_tbl_level1(u64 *tbl)if (!(tbl[i] &GCR3_VALID ))continue ; - ptr =__va (tbl[i] &PAGE_MASK ); + ptr =iommu_phys_to_virt (tbl[i] &PAGE_MASK );free_page ((unsigned long )ptr); }
@@ -1770,7 +1772,7 @@ static void free_gcr3_tbl_level2(u64 *tbl)if (!(tbl[i] &GCR3_VALID ))continue ; - ptr =__va (tbl[i] &PAGE_MASK ); + ptr =iommu_phys_to_virt (tbl[i] &PAGE_MASK );free_gcr3_tbl_level1 (ptr); }
@@ -2049,7 +2051,7 @@ static void set_dte_entry(u16 devid, struct protection_domain *domain, bool ats)u64 flags =0 ;if (domain->mode !=PAGE_MODE_NONE ) - pte_root =virt_to_phys (domain->pt_root); + pte_root =iommu_virt_to_phys (domain->pt_root); pte_root |= (domain->mode &DEV_ENTRY_MODE_MASK ) <<DEV_ENTRY_MODE_SHIFT ;
@@ -2061,7 +2063,7 @@ static void set_dte_entry(u16 devid, struct protection_domain *domain, bool ats) flags |=DTE_FLAG_IOTLB ;if (domain->flags &PD_IOMMUV2_MASK ) { -u64 gcr3 =__pa (domain->gcr3_tbl); +u64 gcr3 =iommu_virt_to_phys (domain->gcr3_tbl);u64 glx = domain->glx;u64 tmp;
@@ -3606,10 +3608,10 @@ static u64 *__get_gcr3_pte(u64 *root, int level, int pasid, bool alloc)if (root ==NULL )return NULL ; - *pte =__pa (root) |GCR3_VALID ; + *pte =iommu_virt_to_phys (root) |GCR3_VALID ; } - root =__va (*pte &PAGE_MASK ); + root =iommu_phys_to_virt (*pte &PAGE_MASK ); level -=1 ; }
@@ -3788,7 +3790,7 @@ static void set_dte_irq_entry(u16 devid, struct irq_remap_table *table) dte = amd_iommu_dev_table[devid].data[2 ]; dte &= ~DTE_IRQ_PHYS_ADDR_MASK ; - dte |=virt_to_phys (table->table); + dte |=iommu_virt_to_phys (table->table); dte |=DTE_IRQ_REMAP_INTCTL ; dte |=DTE_IRQ_TABLE_LEN ; dte |=DTE_IRQ_REMAP_ENABLE ;
drivers/iommu/amd_iommu_init.c +28 -6
@@ -30,6 +30,7 @@#include <linux/iommu.h> #include <linux/kmemleak.h> #include <linux/crash_dump.h> +#include <linux/mem_encrypt.h> #include <asm/pci-direct.h> #include <asm/iommu.h> #include <asm/gart.h>
@@ -348,7 +349,7 @@ static void iommu_set_device_table(struct amd_iommu *iommu)BUG_ON (iommu->mmio_base ==NULL ); - entry =virt_to_phys (amd_iommu_dev_table); + entry =iommu_virt_to_phys (amd_iommu_dev_table); entry |= (dev_table_size >>12 ) -1 ;memcpy_toio (iommu->mmio_base +MMIO_DEV_TABLE_OFFSET , &entry,sizeof (entry));
@@ -606,7 +607,7 @@ static void iommu_enable_command_buffer(struct amd_iommu *iommu)BUG_ON (iommu->cmd_buf ==NULL ); - entry = (u64 )virt_to_phys (iommu->cmd_buf); + entry =iommu_virt_to_phys (iommu->cmd_buf); entry |=MMIO_CMD_SIZE_512 ; memcpy_toio(iommu->mmio_base + MMIO_CMD_BUF_OFFSET,
@@ -635,7 +636,7 @@ static void iommu_enable_event_buffer(struct amd_iommu *iommu)BUG_ON (iommu->evt_buf ==NULL ); - entry = (u64 )virt_to_phys (iommu->evt_buf) |EVT_LEN_MASK ; + entry =iommu_virt_to_phys (iommu->evt_buf) |EVT_LEN_MASK ;memcpy_toio (iommu->mmio_base +MMIO_EVT_BUF_OFFSET , &entry,sizeof (entry));
@@ -668,7 +669,7 @@ static void iommu_enable_ppr_log(struct amd_iommu *iommu)if (iommu->ppr_log ==NULL )return ; - entry = (u64 )virt_to_phys (iommu->ppr_log) |PPR_LOG_SIZE_512 ; + entry =iommu_virt_to_phys (iommu->ppr_log) |PPR_LOG_SIZE_512 ;memcpy_toio (iommu->mmio_base +MMIO_PPR_LOG_OFFSET , &entry,sizeof (entry));
@@ -748,10 +749,10 @@ static int iommu_init_ga_log(struct amd_iommu *iommu)if (!iommu->ga_log_tail) goto err_out; - entry = (u64 )virt_to_phys (iommu->ga_log) |GA_LOG_SIZE_512 ; + entry =iommu_virt_to_phys (iommu->ga_log) |GA_LOG_SIZE_512 ;memcpy_toio (iommu->mmio_base +MMIO_GA_LOG_BASE_OFFSET , &entry,sizeof (entry)); - entry = ((u64 )virt_to_phys (iommu->ga_log) &0xFFFFFFFFFFFFFULL ) & ~7ULL ; + entry = (iommu_virt_to_phys (iommu->ga_log) &0xFFFFFFFFFFFFFULL ) & ~7ULL ;memcpy_toio (iommu->mmio_base +MMIO_GA_LOG_TAIL_OFFSET , &entry,sizeof (entry));writel (0x00 , iommu->mmio_base +MMIO_GA_HEAD_OFFSET );
@@ -2564,6 +2565,24 @@ static int __init amd_iommu_init(void)return ret; } +static bool amd_iommu_sme_check (void ) +{ +if (!sme_active () || (boot_cpu_data.x86 !=0x17 )) +return true; + +/* For Fam17h, a specific level of support is required */ +if (boot_cpu_data.microcode >=0x08001205 ) +return true; + +if ((boot_cpu_data.microcode >=0x08001126 ) && + (boot_cpu_data.microcode <=0x080011ff )) +return true; + +pr_notice ("AMD-Vi: IOMMU not currently supported when SME is active\n" ); + +return false; +} +/**************************************************************************** * * Early detect code. This code runs at IOMMU detection time in the DMA
@@ -2578,6 +2597,9 @@ int __init amd_iommu_detect(void)if (no_iommu || (iommu_detected && !gart_iommu_aperture))return -ENODEV ; +if (!amd_iommu_sme_check ()) +return -ENODEV ; + ret =iommu_go_to_state (IOMMU_IVRS_DETECTED );if (ret)return ret;
drivers/iommu/amd_iommu_proto.h +10 -0
@@ -87,4 +87,14 @@ static inline bool iommu_feature(struct amd_iommu *iommu, u64 f) return !!(iommu->features & f); } +static inline u64 iommu_virt_to_phys (void *vaddr) +{ +return (u64 )__sme_set (virt_to_phys (vaddr)); +} + +static inline void *iommu_phys_to_virt (unsigned long paddr) +{ +return phys_to_virt (__sme_clr (paddr)); +} +#endif /* _ASM_X86_AMD_IOMMU_PROTO_H */
drivers/iommu/amd_iommu_types.h +1 -1
@@ -344,7 +344,7 @@#define IOMMU_PAGE_MASK (((1ULL << 52) - 1) & ~0xfffULL)#define IOMMU_PTE_PRESENT (pte) ((pte) & IOMMU_PTE_P) -#define IOMMU_PTE_PAGE (pte) (phys_to_virt((pte) & IOMMU_PAGE_MASK)) +#define IOMMU_PTE_PAGE (pte) (iommu_phys_to_virt((pte) & IOMMU_PAGE_MASK))#define IOMMU_PTE_MODE (pte) (((pte) >> 9) & 0x07)#define IOMMU_PROT_MASK 0x03
Signature · 1 line
1.9.1
[tip:x86/mm] iommu/amd: Allow the AMD IOMMU to work with memory encryption
Commit-ID: 2543a786aa25258451f3418b87a038c7ddaa2e85 Gitweb: http://git.kernel.org/tip/2543a786aa25258451f3418b87a038c7ddaa2e85 Author: Tom Lendacky <[email protected]> AuthorDate: Mon, 17 Jul 2017 16:10:24 -0500 Committer: Ingo Molnar <[email protected]> CommitDate: Tue, 18 Jul 2017 11:38:03 +0200
iommu/amd: Allow the AMD IOMMU to work with memory encryption
The IOMMU is programmed with physical addresses for the various tables and buffers that are used to communicate between the device and the driver. When the driver allocates this memory it is encrypted. In order for the IOMMU to access the memory as encrypted the encryption mask needs to be included in these physical addresses during configuration.
The PTE entries created by the IOMMU should also include the encryption mask so that when the device behind the IOMMU performs a DMA, the DMA will be performed to encrypted memory.
--- drivers/iommu/amd_iommu.c | 30 ++++++++++++++++-------------- drivers/iommu/amd_iommu_init.c | 34 ++++++++++++++++++++++++++++------ drivers/iommu/amd_iommu_proto.h | 10 ++++++++++ drivers/iommu/amd_iommu_types.h | 2 +- 4 files changed, 55 insertions(+), 21 deletions(-)
drivers/iommu/amd_iommu.c +16 -14
@@ -575,7 +575,7 @@ static void dump_dte_entry(u16 devid)static void dump_command (unsigned long phys_addr) { -struct iommu_cmd *cmd =phys_to_virt (phys_addr); +struct iommu_cmd *cmd =iommu_phys_to_virt (phys_addr);int i;for (i =0 ; i <4 ; ++i)
@@ -919,11 +919,13 @@ static void copy_cmd_to_buffer(struct amd_iommu *iommu,static void build_completion_wait (struct iommu_cmd *cmd,u64 address) { +u64 paddr =iommu_virt_to_phys ((void *)address); +WARN_ON (address &0x7ULL );memset (cmd,0 ,sizeof (*cmd)); - cmd->data[0 ] =lower_32_bits (__pa (address)) |CMD_COMPL_WAIT_STORE_MASK ; - cmd->data[1 ] =upper_32_bits (__pa (address)); + cmd->data[0 ] =lower_32_bits (paddr) |CMD_COMPL_WAIT_STORE_MASK ; + cmd->data[1 ] =upper_32_bits (paddr); cmd->data[2 ] =1 ;CMD_SET_TYPE (cmd,CMD_COMPL_WAIT ); }
@@ -1383,7 +1385,7 @@ static bool increase_address_space(struct protection_domain *domain,return false; *pte =PM_LEVEL_PDE (domain->mode, -virt_to_phys (domain->pt_root)); +iommu_virt_to_phys (domain->pt_root)); domain->pt_root = pte; domain->mode +=1 ; domain->updated = true;
@@ -1420,7 +1422,7 @@ static u64 *alloc_pte(struct protection_domain *domain,if (!page)return NULL ; - __npte =PM_LEVEL_PDE (level,virt_to_phys (page)); + __npte =PM_LEVEL_PDE (level,iommu_virt_to_phys (page));/* pte could have been changed somewhere. */ if (cmpxchg64 (pte, __pte, __npte) != __pte) {
@@ -1536,10 +1538,10 @@ static int iommu_map_page(struct protection_domain *dom,return -EBUSY ;if (count >1 ) { - __pte =PAGE_SIZE_PTE (phys_addr, page_size); + __pte =PAGE_SIZE_PTE (__sme_set (phys_addr), page_size); __pte |=PM_LEVEL_ENC (7 ) |IOMMU_PTE_P |IOMMU_PTE_FC ; }else - __pte = phys_addr |IOMMU_PTE_P |IOMMU_PTE_FC ; + __pte =__sme_set (phys_addr) |IOMMU_PTE_P |IOMMU_PTE_FC ;if (prot &IOMMU_PROT_IR ) __pte |=IOMMU_PTE_IR ;
@@ -1755,7 +1757,7 @@ static void free_gcr3_tbl_level1(u64 *tbl)if (!(tbl[i] &GCR3_VALID ))continue ; - ptr =__va (tbl[i] &PAGE_MASK ); + ptr =iommu_phys_to_virt (tbl[i] &PAGE_MASK );free_page ((unsigned long )ptr); }
@@ -1770,7 +1772,7 @@ static void free_gcr3_tbl_level2(u64 *tbl)if (!(tbl[i] &GCR3_VALID ))continue ; - ptr =__va (tbl[i] &PAGE_MASK ); + ptr =iommu_phys_to_virt (tbl[i] &PAGE_MASK );free_gcr3_tbl_level1 (ptr); }
@@ -2049,7 +2051,7 @@ static void set_dte_entry(u16 devid, struct protection_domain *domain, bool ats)u64 flags =0 ;if (domain->mode !=PAGE_MODE_NONE ) - pte_root =virt_to_phys (domain->pt_root); + pte_root =iommu_virt_to_phys (domain->pt_root); pte_root |= (domain->mode &DEV_ENTRY_MODE_MASK ) <<DEV_ENTRY_MODE_SHIFT ;
@@ -2061,7 +2063,7 @@ static void set_dte_entry(u16 devid, struct protection_domain *domain, bool ats) flags |=DTE_FLAG_IOTLB ;if (domain->flags &PD_IOMMUV2_MASK ) { -u64 gcr3 =__pa (domain->gcr3_tbl); +u64 gcr3 =iommu_virt_to_phys (domain->gcr3_tbl);u64 glx = domain->glx;u64 tmp;
@@ -3606,10 +3608,10 @@ static u64 *__get_gcr3_pte(u64 *root, int level, int pasid, bool alloc)if (root ==NULL )return NULL ; - *pte =__pa (root) |GCR3_VALID ; + *pte =iommu_virt_to_phys (root) |GCR3_VALID ; } - root =__va (*pte &PAGE_MASK ); + root =iommu_phys_to_virt (*pte &PAGE_MASK ); level -=1 ; }
@@ -3788,7 +3790,7 @@ static void set_dte_irq_entry(u16 devid, struct irq_remap_table *table) dte = amd_iommu_dev_table[devid].data[2 ]; dte &= ~DTE_IRQ_PHYS_ADDR_MASK ; - dte |=virt_to_phys (table->table); + dte |=iommu_virt_to_phys (table->table); dte |=DTE_IRQ_REMAP_INTCTL ; dte |=DTE_IRQ_TABLE_LEN ; dte |=DTE_IRQ_REMAP_ENABLE ;
drivers/iommu/amd_iommu_init.c +28 -6
@@ -30,6 +30,7 @@#include <linux/iommu.h> #include <linux/kmemleak.h> #include <linux/crash_dump.h> +#include <linux/mem_encrypt.h> #include <asm/pci-direct.h> #include <asm/iommu.h> #include <asm/gart.h>
@@ -348,7 +349,7 @@ static void iommu_set_device_table(struct amd_iommu *iommu)BUG_ON (iommu->mmio_base ==NULL ); - entry =virt_to_phys (amd_iommu_dev_table); + entry =iommu_virt_to_phys (amd_iommu_dev_table); entry |= (dev_table_size >>12 ) -1 ;memcpy_toio (iommu->mmio_base +MMIO_DEV_TABLE_OFFSET , &entry,sizeof (entry));
@@ -606,7 +607,7 @@ static void iommu_enable_command_buffer(struct amd_iommu *iommu)BUG_ON (iommu->cmd_buf ==NULL ); - entry = (u64 )virt_to_phys (iommu->cmd_buf); + entry =iommu_virt_to_phys (iommu->cmd_buf); entry |=MMIO_CMD_SIZE_512 ; memcpy_toio(iommu->mmio_base + MMIO_CMD_BUF_OFFSET,
@@ -635,7 +636,7 @@ static void iommu_enable_event_buffer(struct amd_iommu *iommu)BUG_ON (iommu->evt_buf ==NULL ); - entry = (u64 )virt_to_phys (iommu->evt_buf) |EVT_LEN_MASK ; + entry =iommu_virt_to_phys (iommu->evt_buf) |EVT_LEN_MASK ;memcpy_toio (iommu->mmio_base +MMIO_EVT_BUF_OFFSET , &entry,sizeof (entry));
@@ -668,7 +669,7 @@ static void iommu_enable_ppr_log(struct amd_iommu *iommu)if (iommu->ppr_log ==NULL )return ; - entry = (u64 )virt_to_phys (iommu->ppr_log) |PPR_LOG_SIZE_512 ; + entry =iommu_virt_to_phys (iommu->ppr_log) |PPR_LOG_SIZE_512 ;memcpy_toio (iommu->mmio_base +MMIO_PPR_LOG_OFFSET , &entry,sizeof (entry));
@@ -748,10 +749,10 @@ static int iommu_init_ga_log(struct amd_iommu *iommu)if (!iommu->ga_log_tail) goto err_out; - entry = (u64 )virt_to_phys (iommu->ga_log) |GA_LOG_SIZE_512 ; + entry =iommu_virt_to_phys (iommu->ga_log) |GA_LOG_SIZE_512 ;memcpy_toio (iommu->mmio_base +MMIO_GA_LOG_BASE_OFFSET , &entry,sizeof (entry)); - entry = ((u64 )virt_to_phys (iommu->ga_log) &0xFFFFFFFFFFFFFULL ) & ~7ULL ; + entry = (iommu_virt_to_phys (iommu->ga_log) &0xFFFFFFFFFFFFFULL ) & ~7ULL ;memcpy_toio (iommu->mmio_base +MMIO_GA_LOG_TAIL_OFFSET , &entry,sizeof (entry));writel (0x00 , iommu->mmio_base +MMIO_GA_HEAD_OFFSET );
@@ -2564,6 +2565,24 @@ static int __init amd_iommu_init(void)return ret; } +static bool amd_iommu_sme_check (void ) +{ +if (!sme_active () || (boot_cpu_data.x86 !=0x17 )) +return true; + +/* For Fam17h, a specific level of support is required */ +if (boot_cpu_data.microcode >=0x08001205 ) +return true; + +if ((boot_cpu_data.microcode >=0x08001126 ) && + (boot_cpu_data.microcode <=0x080011ff )) +return true; + +pr_notice ("AMD-Vi: IOMMU not currently supported when SME is active\n" ); + +return false; +} +/**************************************************************************** * * Early detect code. This code runs at IOMMU detection time in the DMA
@@ -2578,6 +2597,9 @@ int __init amd_iommu_detect(void)if (no_iommu || (iommu_detected && !gart_iommu_aperture))return -ENODEV ; +if (!amd_iommu_sme_check ()) +return -ENODEV ; + ret =iommu_go_to_state (IOMMU_IVRS_DETECTED );if (ret)return ret;
drivers/iommu/amd_iommu_proto.h +10 -0
@@ -87,4 +87,14 @@ static inline bool iommu_feature(struct amd_iommu *iommu, u64 f) return !!(iommu->features & f); } +static inline u64 iommu_virt_to_phys (void *vaddr) +{ +return (u64 )__sme_set (virt_to_phys (vaddr)); +} + +static inline void *iommu_phys_to_virt (unsigned long paddr) +{ +return phys_to_virt (__sme_clr (paddr)); +} +#endif /* _ASM_X86_AMD_IOMMU_PROTO_H */
drivers/iommu/amd_iommu_types.h +1 -1
@@ -344,7 +344,7 @@#define IOMMU_PAGE_MASK (((1ULL << 52) - 1) & ~0xfffULL)#define IOMMU_PTE_PRESENT (pte) ((pte) & IOMMU_PTE_P) -#define IOMMU_PTE_PAGE (pte) (phys_to_virt((pte) & IOMMU_PAGE_MASK)) +#define IOMMU_PTE_PAGE (pte) (iommu_phys_to_virt((pte) & IOMMU_PAGE_MASK))#define IOMMU_PTE_MODE (pte) (((pte) >> 9) & 0x07)#define IOMMU_PROT_MASK 0x03
_______________________________________________
iommu mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/iommu
PATCH v10 28/38 x86, realmode: Check for memory encryption on the APs
In reply to Tom LendackyAdd support to check if memory encryption is active in the kernel and that it has been enabled on the AP. If memory encryption is active in the kernel but has not been enabled on the AP, then set the memory encryption bit (bit
23) of MSR_K8_SYSCFG to enable memory encryption on that AP and allow the AP to continue start up.
--- arch/x86/include/asm/realmode.h | 12 ++++++++++++ arch/x86/realmode/init.c | 4 ++++ arch/x86/realmode/rm/trampoline_64.S | 24 ++++++++++++++++++++++++ 3 files changed, 40 insertions(+)
arch/x86/include/asm/realmode.h +12 -0
@@ -1,6 +1,15 @@#ifndef _ARCH_X86_REALMODE_H#define _ARCH_X86_REALMODE_H +/* +* Flag bit definitions for use with the flags field of the trampoline header +* in the CONFIG_X86_64 variant. +*/ +#define TH_FLAGS_SME_ACTIVE_BIT 0 +#define TH_FLAGS_SME_ACTIVE BIT(TH_FLAGS_SME_ACTIVE_BIT) + +#ifndef __ASSEMBLY__ +#include <linux/types.h> #include <asm/io.h>
@@ -38,6 +47,7 @@ struct trampoline_header {u64 start;u64 efer;u32 cr4; +u32 flags;#endif };
@@ -69,4 +79,6 @@ static inline size_t real_mode_size_needed(void)void set_real_mode_mem (phys_addr_t mem,size_t size);void reserve_real_mode (void ); +#endif /* __ASSEMBLY__ */ +#endif /* _ARCH_X86_REALMODE_H */
arch/x86/realmode/init.c +4 -0
@@ -108,6 +108,10 @@ static void __init setup_real_mode(void) trampoline_cr4_features = &trampoline_header->cr4; *trampoline_cr4_features = mmu_cr4_features; + trampoline_header->flags =0 ; +if (sme_active ()) + trampoline_header->flags |=TH_FLAGS_SME_ACTIVE ; + trampoline_pgd = (u64 *)__va (real_mode_header->trampoline_pgd); trampoline_pgd[0 ] = trampoline_pgd_entry.pgd; trampoline_pgd[511 ] = init_top_pgt[511 ].pgd;
arch/x86/realmode/rm/trampoline_64.S +24 -0
@@ -30,6 +30,7 @@ #include <asm/msr.h> #include <asm/segment.h> #include <asm/processor-flags.h> +#include <asm/realmode.h> #include "realmode.h" .text
@@ -92,6 +93,28 @@ ENTRY(startup_32) movl %edx, %fs movl %edx, %gs + /* + * Check for memory encryption support. This is a safety net in + * case BIOS hasn't done the necessary step of setting the bit in + * the MSR for this AP. If SME is active and we've gotten this far + * then it is safe for us to set the MSR bit and continue. If we + * don't we'll eventually crash trying to execute encrypted + * instructions. + */ + bt $TH_FLAGS_SME_ACTIVE_BIT, pa_tr_flags + jnc .Ldone + movl $MSR_K8_SYSCFG, %ecx + rdmsr + bts $MSR_K8_SYSCFG_MEM_ENCRYPT_BIT, %eax + jc .Ldone + + /* + * Memory encryption is enabled but the SME enable bit for this + * CPU has has not been set. It is safe to set it, so do so. + */ + wrmsr +.Ldone: + movl pa_tr_cr4, %eax movl %eax, %cr4 # Enable PAE mode
@@ -147,6 +170,7 @@ GLOBAL(trampoline_header) tr_start: .space 8 GLOBAL(tr_efer) .space 8 GLOBAL(tr_cr4) .space 4 + GLOBAL(tr_flags) .space 4 END(trampoline_header) #include "trampoline_common.S"
Signature · 1 line
1.9.1
tip-bot for Tom Lendacky
merge bot[tip:x86/mm] x86/boot/realmode: Check for memory encryption on the APs
x86/boot/realmode: Check for memory encryption on the APs
Commit-ID: 46d010e04a637ca5bbdd0ff72554d9c06f2961c9 Gitweb: http://git.kernel.org/tip/46d010e04a637ca5bbdd0ff72554d9c06f2961c9 Author: Tom Lendacky <[email protected]> AuthorDate: Mon, 17 Jul 2017 16:10:25 -0500 Committer: Ingo Molnar <[email protected]> CommitDate: Tue, 18 Jul 2017 11:38:04 +0200
x86/boot/realmode: Check for memory encryption on the APs
Add support to check if memory encryption is active in the kernel and that it has been enabled on the AP. If memory encryption is active in the kernel but has not been enabled on the AP, then set the memory encryption bit (bit
23) of MSR_K8_SYSCFG to enable memory encryption on that AP and allow the AP to continue start up.
--- arch/x86/include/asm/realmode.h | 12 ++++++++++++ arch/x86/realmode/init.c | 4 ++++ arch/x86/realmode/rm/trampoline_64.S | 24 ++++++++++++++++++++++++ 3 files changed, 40 insertions(+)
arch/x86/include/asm/realmode.h +12 -0
@@ -1,6 +1,15 @@#ifndef _ARCH_X86_REALMODE_H#define _ARCH_X86_REALMODE_H +/* +* Flag bit definitions for use with the flags field of the trampoline header +* in the CONFIG_X86_64 variant. +*/ +#define TH_FLAGS_SME_ACTIVE_BIT 0 +#define TH_FLAGS_SME_ACTIVE BIT(TH_FLAGS_SME_ACTIVE_BIT) + +#ifndef __ASSEMBLY__ +#include <linux/types.h> #include <asm/io.h>
@@ -38,6 +47,7 @@ struct trampoline_header {u64 start;u64 efer;u32 cr4; +u32 flags;#endif };
@@ -69,4 +79,6 @@ static inline size_t real_mode_size_needed(void)void set_real_mode_mem (phys_addr_t mem,size_t size);void reserve_real_mode (void ); +#endif /* __ASSEMBLY__ */ +#endif /* _ARCH_X86_REALMODE_H */
arch/x86/realmode/init.c +4 -0
@@ -108,6 +108,10 @@ static void __init setup_real_mode(void) trampoline_cr4_features = &trampoline_header->cr4; *trampoline_cr4_features = mmu_cr4_features; + trampoline_header->flags =0 ; +if (sme_active ()) + trampoline_header->flags |=TH_FLAGS_SME_ACTIVE ; + trampoline_pgd = (u64 *)__va (real_mode_header->trampoline_pgd); trampoline_pgd[0 ] = trampoline_pgd_entry.pgd; trampoline_pgd[511 ] = init_top_pgt[511 ].pgd;
arch/x86/realmode/rm/trampoline_64.S +24 -0
@@ -30,6 +30,7 @@ #include <asm/msr.h> #include <asm/segment.h> #include <asm/processor-flags.h> +#include <asm/realmode.h> #include "realmode.h" .text
@@ -92,6 +93,28 @@ ENTRY(startup_32) movl %edx, %fs movl %edx, %gs + /* + * Check for memory encryption support. This is a safety net in + * case BIOS hasn't done the necessary step of setting the bit in + * the MSR for this AP. If SME is active and we've gotten this far + * then it is safe for us to set the MSR bit and continue. If we + * don't we'll eventually crash trying to execute encrypted + * instructions. + */ + bt $TH_FLAGS_SME_ACTIVE_BIT, pa_tr_flags + jnc .Ldone + movl $MSR_K8_SYSCFG, %ecx + rdmsr + bts $MSR_K8_SYSCFG_MEM_ENCRYPT_BIT, %eax + jc .Ldone + + /* + * Memory encryption is enabled but the SME enable bit for this + * CPU has has not been set. It is safe to set it, so do so. + */ + wrmsr +.Ldone: + movl pa_tr_cr4, %eax movl %eax, %cr4 # Enable PAE mode
@@ -147,6 +170,7 @@ GLOBAL(trampoline_header) tr_start: .space 8 GLOBAL(tr_efer) .space 8 GLOBAL(tr_cr4) .space 4 + GLOBAL(tr_flags) .space 4 END(trampoline_header) #include "trampoline_common.S"
PATCH v10 29/38 x86, drm, fbdev: Do not specify encrypted memory for video mappings
In reply to Tom LendackySince video memory needs to be accessed decrypted, be sure that the memory encryption mask is not set for the video ranges.
--- arch/x86/include/asm/vga.h | 14 +++++++++++++- arch/x86/mm/pageattr.c | 2 ++ drivers/gpu/drm/drm_gem.c | 2 ++ drivers/gpu/drm/drm_vm.c | 4 ++++ drivers/gpu/drm/ttm/ttm_bo_vm.c | 7 +++++-- drivers/gpu/drm/udl/udl_fb.c | 4 ++++ drivers/video/fbdev/core/fbmem.c | 12 ++++++++++++ 7 files changed, 42 insertions(+), 3 deletions(-)
arch/x86/include/asm/vga.h +13 -1
@@ -7,12 +7,24 @@#ifndef _ASM_X86_VGA_H#define _ASM_X86_VGA_H +#include <asm/set_memory.h> +/* * On the PC, we can just recalculate addresses and then * access the videoram directly without any black magic. +* To support memory encryption however, we need to access +* the videoram as decrypted memory. */ -#define VGA_MAP_MEM (x, s) (unsigned long)phys_to_virt(x) +#define VGA_MAP_MEM (x, s) \ +({ \ + unsigned long start = (unsigned long)phys_to_virt(x); \ + \ + if (IS_ENABLED(CONFIG_AMD_MEM_ENCRYPT)) \ + set_memory_decrypted(start, (s) >> PAGE_SHIFT); \ + \ + start; \ +})#define vga_readb (x) (*(x))#define vga_writeb (x, y) (*(y) = (x))
arch/x86/mm/pageattr.c +2 -0
@@ -1831,11 +1831,13 @@ int set_memory_encrypted(unsigned long addr, int numpages) {return __set_memory_enc_dec (addr, numpages, true); } +EXPORT_SYMBOL_GPL (set_memory_encrypted);int set_memory_decrypted (unsigned long addr,int numpages) {return __set_memory_enc_dec (addr, numpages, false); } +EXPORT_SYMBOL_GPL (set_memory_decrypted);int set_pages_uc (struct page *page,int numpages) {
drivers/gpu/drm/drm_gem.c +2 -0
@@ -36,6 +36,7 @@#include <linux/pagemap.h> #include <linux/shmem_fs.h> #include <linux/dma-buf.h> +#include <linux/mem_encrypt.h> #include <drm/drmP.h> #include <drm/drm_vma_manager.h> #include <drm/drm_gem.h>
@@ -928,6 +929,7 @@ int drm_gem_mmap_obj(struct drm_gem_object *obj, unsigned long obj_size, vma->vm_ops = dev->driver->gem_vm_ops; vma->vm_private_data = obj; vma->vm_page_prot =pgprot_writecombine (vm_get_page_prot (vma->vm_flags)); + vma->vm_page_prot =pgprot_decrypted (vma->vm_page_prot);/* Take a ref for this mapping of the object, so that the fault * handler can dereference the mmap offset's pointer to the object.
drivers/gpu/drm/drm_vm.c +4 -0
@@ -40,6 +40,7 @@#include <linux/efi.h> #include <linux/slab.h> #endif +#include <linux/mem_encrypt.h> #include <asm/pgtable.h> #include "drm_internal.h" #include "drm_legacy.h"
@@ -58,6 +59,9 @@ static pgprot_t drm_io_prot(struct drm_local_map *map, {pgprot_t tmp =vm_get_page_prot (vma->vm_flags); +/* We don't want graphics memory to be mapped encrypted */ + tmp =pgprot_decrypted (tmp); +#if defined(__i386__) || defined(__x86_64__) || defined(__powerpc__)if (map->type == _DRM_REGISTERS && !(map->flags & _DRM_WRITE_COMBINING)) tmp =pgprot_noncached (tmp);
drivers/gpu/drm/ttm/ttm_bo_vm.c +5 -2
@@ -39,6 +39,7 @@#include <linux/rbtree.h> #include <linux/module.h> #include <linux/uaccess.h> +#include <linux/mem_encrypt.h> #define TTM_BO_VM_NUM_PREFAULT 16
@@ -230,9 +231,11 @@ static int ttm_bo_vm_fault(struct vm_fault *vmf)* first page. */ for (i =0 ; i <TTM_BO_VM_NUM_PREFAULT ; ++i) { -if (bo->mem.bus.is_iomem) +if (bo->mem.bus.is_iomem) { +/* Iomem should not be marked encrypted */ + cvma.vm_page_prot =pgprot_decrypted (cvma.vm_page_prot); pfn = bdev->driver->io_mem_pfn (bo, page_offset); -else { + }else { page = ttm->pages[page_offset];if (unlikely (!page && i ==0 )) { retval =VM_FAULT_OOM ;
drivers/gpu/drm/udl/udl_fb.c +4 -0
@@ -14,6 +14,7 @@#include <linux/slab.h> #include <linux/fb.h> #include <linux/dma-buf.h> +#include <linux/mem_encrypt.h> #include <drm/drmP.h> #include <drm/drm_crtc.h>
@@ -169,6 +170,9 @@ static int udl_fb_mmap(struct fb_info *info, struct vm_area_struct *vma)pr_notice ("mmap() framebuffer addr:%lu size:%lu\n" , pos, size); +/* We don't want the framebuffer to be mapped encrypted */ + vma->vm_page_prot =pgprot_decrypted (vma->vm_page_prot); +while (size >0 ) { page =vmalloc_to_pfn ((void *)pos);if (remap_pfn_range (vma, start, page,PAGE_SIZE ,PAGE_SHARED ))
drivers/video/fbdev/core/fbmem.c +12 -0
@@ -32,6 +32,7 @@#include <linux/device.h> #include <linux/efi.h> #include <linux/fb.h> +#include <linux/mem_encrypt.h> #include <asm/fb.h>
@@ -1396,6 +1397,12 @@ static long fb_compat_ioctl(struct file *file, unsigned int cmd,mutex_lock (&info->mm_lock);if (fb->fb_mmap) {int res; + +/* +* The framebuffer needs to be accessed decrypted, be sure +* SME protection is removed ahead of the call +*/ + vma->vm_page_prot =pgprot_decrypted (vma->vm_page_prot); res = fb->fb_mmap (info, vma);mutex_unlock (&info->mm_lock);return res;
@@ -1421,6 +1428,11 @@ static long fb_compat_ioctl(struct file *file, unsigned int cmd,mutex_unlock (&info->mm_lock); vma->vm_page_prot =vm_get_page_prot (vma->vm_flags); +/* +* The framebuffer needs to be accessed decrypted, be sure +* SME protection is removed +*/ + vma->vm_page_prot =pgprot_decrypted (vma->vm_page_prot);fb_pgprotect (file, vma, start);return vm_iomap_memory (vma, start, len);
Signature · 7 lines
1.9.1 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
tip-bot for Tom Lendacky
merge bot[tip:x86/mm] x86, drm, fbdev: Do not specify encrypted memory for video mappings
x86, drm, fbdev: Do not specify encrypted memory for video mappings
Commit-ID: 95cf9264d5f36c291c1c50c00349f83348e6f9c7 Gitweb: http://git.kernel.org/tip/95cf9264d5f36c291c1c50c00349f83348e6f9c7 Author: Tom Lendacky <[email protected]> AuthorDate: Mon, 17 Jul 2017 16:10:26 -0500 Committer: Ingo Molnar <[email protected]> CommitDate: Tue, 18 Jul 2017 11:38:04 +0200
x86, drm, fbdev: Do not specify encrypted memory for video mappings
Since video memory needs to be accessed decrypted, be sure that the memory encryption mask is not set for the video ranges.
--- arch/x86/include/asm/vga.h | 14 +++++++++++++- arch/x86/mm/pageattr.c | 2 ++ drivers/gpu/drm/drm_gem.c | 2 ++ drivers/gpu/drm/drm_vm.c | 4 ++++ drivers/gpu/drm/ttm/ttm_bo_vm.c | 7 +++++-- drivers/gpu/drm/udl/udl_fb.c | 4 ++++ drivers/video/fbdev/core/fbmem.c | 12 ++++++++++++ 7 files changed, 42 insertions(+), 3 deletions(-)
arch/x86/include/asm/vga.h +13 -1
@@ -7,12 +7,24 @@#ifndef _ASM_X86_VGA_H#define _ASM_X86_VGA_H +#include <asm/set_memory.h> +/* * On the PC, we can just recalculate addresses and then * access the videoram directly without any black magic. +* To support memory encryption however, we need to access +* the videoram as decrypted memory. */ -#define VGA_MAP_MEM (x, s) (unsigned long)phys_to_virt(x) +#define VGA_MAP_MEM (x, s) \ +({ \ + unsigned long start = (unsigned long)phys_to_virt(x); \ + \ + if (IS_ENABLED(CONFIG_AMD_MEM_ENCRYPT)) \ + set_memory_decrypted(start, (s) >> PAGE_SHIFT); \ + \ + start; \ +})#define vga_readb (x) (*(x))#define vga_writeb (x, y) (*(y) = (x))
arch/x86/mm/pageattr.c +2 -0
@@ -1831,11 +1831,13 @@ int set_memory_encrypted(unsigned long addr, int numpages) {return __set_memory_enc_dec (addr, numpages, true); } +EXPORT_SYMBOL_GPL (set_memory_encrypted);int set_memory_decrypted (unsigned long addr,int numpages) {return __set_memory_enc_dec (addr, numpages, false); } +EXPORT_SYMBOL_GPL (set_memory_decrypted);int set_pages_uc (struct page *page,int numpages) {
drivers/gpu/drm/drm_gem.c +2 -0
@@ -36,6 +36,7 @@#include <linux/pagemap.h> #include <linux/shmem_fs.h> #include <linux/dma-buf.h> +#include <linux/mem_encrypt.h> #include <drm/drmP.h> #include <drm/drm_vma_manager.h> #include <drm/drm_gem.h>
@@ -928,6 +929,7 @@ int drm_gem_mmap_obj(struct drm_gem_object *obj, unsigned long obj_size, vma->vm_ops = dev->driver->gem_vm_ops; vma->vm_private_data = obj; vma->vm_page_prot =pgprot_writecombine (vm_get_page_prot (vma->vm_flags)); + vma->vm_page_prot =pgprot_decrypted (vma->vm_page_prot);/* Take a ref for this mapping of the object, so that the fault * handler can dereference the mmap offset's pointer to the object.
drivers/gpu/drm/drm_vm.c +4 -0
@@ -40,6 +40,7 @@#include <linux/efi.h> #include <linux/slab.h> #endif +#include <linux/mem_encrypt.h> #include <asm/pgtable.h> #include "drm_internal.h" #include "drm_legacy.h"
@@ -58,6 +59,9 @@ static pgprot_t drm_io_prot(struct drm_local_map *map, {pgprot_t tmp =vm_get_page_prot (vma->vm_flags); +/* We don't want graphics memory to be mapped encrypted */ + tmp =pgprot_decrypted (tmp); +#if defined(__i386__) || defined(__x86_64__) || defined(__powerpc__)if (map->type == _DRM_REGISTERS && !(map->flags & _DRM_WRITE_COMBINING)) tmp =pgprot_noncached (tmp);
drivers/gpu/drm/ttm/ttm_bo_vm.c +5 -2
@@ -39,6 +39,7 @@#include <linux/rbtree.h> #include <linux/module.h> #include <linux/uaccess.h> +#include <linux/mem_encrypt.h> #define TTM_BO_VM_NUM_PREFAULT 16
@@ -230,9 +231,11 @@ static int ttm_bo_vm_fault(struct vm_fault *vmf)* first page. */ for (i =0 ; i <TTM_BO_VM_NUM_PREFAULT ; ++i) { -if (bo->mem.bus.is_iomem) +if (bo->mem.bus.is_iomem) { +/* Iomem should not be marked encrypted */ + cvma.vm_page_prot =pgprot_decrypted (cvma.vm_page_prot); pfn = bdev->driver->io_mem_pfn (bo, page_offset); -else { + }else { page = ttm->pages[page_offset];if (unlikely (!page && i ==0 )) { retval =VM_FAULT_OOM ;
drivers/gpu/drm/udl/udl_fb.c +4 -0
@@ -14,6 +14,7 @@#include <linux/slab.h> #include <linux/fb.h> #include <linux/dma-buf.h> +#include <linux/mem_encrypt.h> #include <drm/drmP.h> #include <drm/drm_crtc.h>
@@ -169,6 +170,9 @@ static int udl_fb_mmap(struct fb_info *info, struct vm_area_struct *vma)pr_notice ("mmap() framebuffer addr:%lu size:%lu\n" , pos, size); +/* We don't want the framebuffer to be mapped encrypted */ + vma->vm_page_prot =pgprot_decrypted (vma->vm_page_prot); +while (size >0 ) { page =vmalloc_to_pfn ((void *)pos);if (remap_pfn_range (vma, start, page,PAGE_SIZE ,PAGE_SHARED ))
drivers/video/fbdev/core/fbmem.c +12 -0
@@ -32,6 +32,7 @@#include <linux/device.h> #include <linux/efi.h> #include <linux/fb.h> +#include <linux/mem_encrypt.h> #include <asm/fb.h>
@@ -1396,6 +1397,12 @@ fb_mmap(struct file *file, struct vm_area_struct * vma)mutex_lock (&info->mm_lock);if (fb->fb_mmap) {int res; + +/* +* The framebuffer needs to be accessed decrypted, be sure +* SME protection is removed ahead of the call +*/ + vma->vm_page_prot =pgprot_decrypted (vma->vm_page_prot); res = fb->fb_mmap (info, vma);mutex_unlock (&info->mm_lock);return res;
@@ -1421,6 +1428,11 @@ fb_mmap(struct file *file, struct vm_area_struct * vma)mutex_unlock (&info->mm_lock); vma->vm_page_prot =vm_get_page_prot (vma->vm_flags); +/* +* The framebuffer needs to be accessed decrypted, be sure +* SME protection is removed +*/ + vma->vm_page_prot =pgprot_decrypted (vma->vm_page_prot);fb_pgprotect (file, vma, start);return vm_iomap_memory (vma, start, len);
PATCH v10 30/38 kvm: x86: svm: Support Secure Memory Encryption within KVM
In reply to Tom LendackyUpdate the KVM support to work with SME. The VMCB has a number of fields where physical addresses are used and these addresses must contain the memory encryption mask in order to properly access the encrypted memory. Also, use the memory encryption mask when creating and using the nested page tables.
--- arch/x86/include/asm/kvm_host.h | 2 +- arch/x86/kvm/mmu.c | 11 +++++++---- arch/x86/kvm/mmu.h | 2 +- arch/x86/kvm/svm.c | 35 ++++++++++++++++++----------------- arch/x86/kvm/vmx.c | 2 +- arch/x86/kvm/x86.c | 3 ++- 6 files changed, 30 insertions(+), 25 deletions(-)
arch/x86/include/asm/kvm_host.h +1 -1
@@ -1078,7 +1078,7 @@ struct kvm_arch_async_pf {void kvm_mmu_uninit_vm (struct kvm *kvm);void kvm_mmu_set_mask_ptes (u64 user_mask,u64 accessed_mask,u64 dirty_mask,u64 nx_mask,u64 x_mask,u64 p_mask, -u64 acc_track_mask); +u64 acc_track_mask,u64 me_mask);void kvm_mmu_reset_context (struct kvm_vcpu *vcpu); void kvm_mmu_slot_remove_write_access(struct kvm *kvm,
arch/x86/kvm/mmu.c +7 -4
@@ -108,7 +108,7 @@ enum { (((address) >> PT32_LEVEL_SHIFT(level)) & ((1 << PT32_LEVEL_BITS) - 1)) -#define PT64_BASE_ADDR_MASK (((1ULL << 52) - 1) & ~(u64)(PAGE_SIZE-1)) +#define PT64_BASE_ADDR_MASK __sme_clr((((1ULL << 52) - 1) & ~(u64)(PAGE_SIZE-1)))#define PT64_DIR_BASE_ADDR_MASK \ (PT64_BASE_ADDR_MASK & ~((1ULL << (PAGE_SHIFT + PT64_LEVEL_BITS)) - 1))#define PT64_LVL_ADDR_MASK (level) \
@@ -126,7 +126,7 @@ enum { * PT32_LEVEL_BITS))) - 1))#define PT64_PERM_MASK (PT_PRESENT_MASK | PT_WRITABLE_MASK | shadow_user_mask \ - | shadow_x_mask | shadow_nx_mask) + | shadow_x_mask | shadow_nx_mask | shadow_me_mask)#define ACC_EXEC_MASK 1#define ACC_WRITE_MASK PT_WRITABLE_MASK
@@ -186,6 +186,7 @@ struct kvm_shadow_walk_iterator {static u64 __read_mostly shadow_mmio_mask;static u64 __read_mostly shadow_mmio_value;static u64 __read_mostly shadow_present_mask; +static u64 __read_mostly shadow_me_mask;/* * SPTEs used by MMUs without A/D bits are marked with shadow_acc_track_value.
@@ -349,7 +350,7 @@ static bool check_mmio_spte(struct kvm_vcpu *vcpu, u64 spte)*/ void kvm_mmu_set_mask_ptes (u64 user_mask,u64 accessed_mask,u64 dirty_mask,u64 nx_mask,u64 x_mask,u64 p_mask, -u64 acc_track_mask) +u64 acc_track_mask,u64 me_mask) {BUG_ON (!dirty_mask != !accessed_mask);BUG_ON (!accessed_mask && !acc_track_mask);
@@ -362,6 +363,7 @@ void kvm_mmu_set_mask_ptes(u64 user_mask, u64 accessed_mask, shadow_x_mask = x_mask; shadow_present_mask = p_mask; shadow_acc_track_mask = acc_track_mask; + shadow_me_mask = me_mask; }EXPORT_SYMBOL_GPL (kvm_mmu_set_mask_ptes);
@@ -2433,7 +2435,7 @@ static void link_shadow_page(struct kvm_vcpu *vcpu, u64 *sptep,BUILD_BUG_ON (VMX_EPT_WRITABLE_MASK !=PT_WRITABLE_MASK ); spte =__pa (sp->spt) | shadow_present_mask |PT_WRITABLE_MASK | - shadow_user_mask | shadow_x_mask; + shadow_user_mask | shadow_x_mask | shadow_me_mask;if (sp_ad_disabled (sp)) spte |= shadow_acc_track_value;
@@ -2745,6 +2747,7 @@ static int set_spte(struct kvm_vcpu *vcpu, u64 *sptep, pte_access &= ~ACC_WRITE_MASK ; spte |= (u64 )pfn <<PAGE_SHIFT ; + spte |= shadow_me_mask;if (pte_access &ACC_WRITE_MASK ) {
arch/x86/kvm/mmu.h +1 -1
@@ -48,7 +48,7 @@static inline u64 rsvd_bits (int s,int e) { -return ((1ULL << (e - s +1 )) -1 ) << s; +return __sme_clr (((1ULL << (e - s +1 )) -1 ) << s); }void kvm_mmu_set_mmio_spte_mask (u64 mmio_mask,u64 mmio_value);
arch/x86/kvm/svm.c +18 -17
@@ -1167,9 +1167,9 @@ static void avic_init_vmcb(struct vcpu_svm *svm) {struct vmcb *vmcb = svm->vmcb;struct kvm_arch *vm_data = &svm->vcpu.kvm->arch; -phys_addr_t bpa =page_to_phys (svm->avic_backing_page); -phys_addr_t lpa =page_to_phys (vm_data->avic_logical_id_table_page); -phys_addr_t ppa =page_to_phys (vm_data->avic_physical_id_table_page); +phys_addr_t bpa =__sme_set (page_to_phys (svm->avic_backing_page)); +phys_addr_t lpa =__sme_set (page_to_phys (vm_data->avic_logical_id_table_page)); +phys_addr_t ppa =__sme_set (page_to_phys (vm_data->avic_physical_id_table_page)); vmcb->control.avic_backing_page = bpa &AVIC_HPA_MASK ; vmcb->control.avic_logical_id = lpa &AVIC_HPA_MASK ;
@@ -1232,8 +1232,8 @@ static void init_vmcb(struct vcpu_svm *svm)set_intercept (svm,INTERCEPT_MWAIT ); } - control->iopm_base_pa = iopm_base; - control->msrpm_base_pa =__pa (svm->msrpm); + control->iopm_base_pa =__sme_set (iopm_base); + control->msrpm_base_pa =__sme_set (__pa (svm->msrpm)); control->int_ctl =V_INTR_MASKING_MASK ;init_seg (&save->es);
@@ -1377,9 +1377,9 @@ static int avic_init_backing_page(struct kvm_vcpu *vcpu)return -EINVAL ; new_entry =READ_ONCE (*entry); - new_entry = (page_to_phys (svm->avic_backing_page) & -AVIC_PHYSICAL_ID_ENTRY_BACKING_PAGE_MASK ) | -AVIC_PHYSICAL_ID_ENTRY_VALID_MASK ; + new_entry =__sme_set ((page_to_phys (svm->avic_backing_page) & +AVIC_PHYSICAL_ID_ENTRY_BACKING_PAGE_MASK ) | +AVIC_PHYSICAL_ID_ENTRY_VALID_MASK );WRITE_ONCE (*entry, new_entry); svm->avic_physical_id_cache = entry;
@@ -1647,7 +1647,7 @@ static struct kvm_vcpu *svm_create_vcpu(struct kvm *kvm, unsigned int id) svm->vmcb =page_address (page);clear_page (svm->vmcb); - svm->vmcb_pa =page_to_pfn (page) <<PAGE_SHIFT ; + svm->vmcb_pa =__sme_set (page_to_pfn (page) <<PAGE_SHIFT ); svm->asid_generation =0 ;init_vmcb (svm);
@@ -1675,7 +1675,7 @@ static void svm_free_vcpu(struct kvm_vcpu *vcpu) {struct vcpu_svm *svm =to_svm (vcpu); -__free_page (pfn_to_page (svm->vmcb_pa >>PAGE_SHIFT )); +__free_page (pfn_to_page (__sme_clr (svm->vmcb_pa) >>PAGE_SHIFT ));__free_pages (virt_to_page (svm->msrpm),MSRPM_ALLOC_ORDER );__free_page (virt_to_page (svm->nested.hsave));__free_pages (virt_to_page (svm->nested.msrpm),MSRPM_ALLOC_ORDER );
@@ -2335,7 +2335,7 @@ static u64 nested_svm_get_tdp_pdptr(struct kvm_vcpu *vcpu, int index)u64 pdpte;int ret; - ret =kvm_vcpu_read_guest_page (vcpu,gpa_to_gfn (cr3), &pdpte, + ret =kvm_vcpu_read_guest_page (vcpu,gpa_to_gfn (__sme_clr (cr3)), &pdpte,offset_in_page (cr3) + index *8 ,8 );if (ret)return 0 ;
@@ -2347,7 +2347,7 @@ static void nested_svm_set_tdp_cr3(struct kvm_vcpu *vcpu, {struct vcpu_svm *svm =to_svm (vcpu); - svm->vmcb->control.nested_cr3 = root; + svm->vmcb->control.nested_cr3 =__sme_set (root);mark_dirty (svm->vmcb,VMCB_NPT );svm_flush_tlb (vcpu); }
@@ -2868,7 +2868,7 @@ static bool nested_svm_vmrun_msrpm(struct vcpu_svm *svm) svm->nested.msrpm[p] = svm->msrpm[p] | value; } - svm->vmcb->control.msrpm_base_pa =__pa (svm->nested.msrpm); + svm->vmcb->control.msrpm_base_pa =__sme_set (__pa (svm->nested.msrpm));return true; }
@@ -4501,7 +4501,7 @@ static int svm_ir_list_add(struct vcpu_svm *svm, struct amd_iommu_pi_data *pi)pr_debug ("SVM: %s: use GA mode for irq %u\n" , __func__, irq.vector); *svm =to_svm (vcpu); - vcpu_info->pi_desc_addr =page_to_phys ((*svm)->avic_backing_page); + vcpu_info->pi_desc_addr =__sme_set (page_to_phys ((*svm)->avic_backing_page)); vcpu_info->vector = irq.vector;return 0 ;
@@ -4552,7 +4552,8 @@ static int svm_update_pi_irte(struct kvm *kvm, unsigned int host_irq,struct amd_iommu_pi_data pi;/* Try to enable guest_mode in IRTE */ - pi.base =page_to_phys (svm->avic_backing_page) &AVIC_HPA_MASK ; + pi.base =__sme_set (page_to_phys (svm->avic_backing_page) & +AVIC_HPA_MASK ); pi.ga_tag =AVIC_GATAG (kvm->arch.avic_vm_id, svm->vcpu.vcpu_id); pi.is_guest_mode = true;
@@ -5001,7 +5002,7 @@ static void svm_set_cr3(struct kvm_vcpu *vcpu, unsigned long root) {struct vcpu_svm *svm =to_svm (vcpu); - svm->vmcb->save.cr3 = root; + svm->vmcb->save.cr3 =__sme_set (root);mark_dirty (svm->vmcb,VMCB_CR );svm_flush_tlb (vcpu); }
@@ -5010,7 +5011,7 @@ static void set_tdp_cr3(struct kvm_vcpu *vcpu, unsigned long root) {struct vcpu_svm *svm =to_svm (vcpu); - svm->vmcb->control.nested_cr3 = root; + svm->vmcb->control.nested_cr3 =__sme_set (root);mark_dirty (svm->vmcb,VMCB_NPT );/* Also sync guest cr3 here in case we live migrate */
arch/x86/kvm/vmx.c +1 -1
@@ -6492,7 +6492,7 @@ void vmx_enable_tdp(void) enable_ept_ad_bits ?VMX_EPT_DIRTY_BIT :0ull ,0ull ,VMX_EPT_EXECUTABLE_MASK ,cpu_has_vmx_ept_execute_only () ?0ull :VMX_EPT_READABLE_MASK , - VMX_EPT_RWX_MASK); + VMX_EPT_RWX_MASK, 0ull);ept_set_mmio_spte_mask ();kvm_enable_tdp ();
arch/x86/kvm/x86.c +2 -1
@@ -54,6 +54,7 @@#include <linux/kvm_irqfd.h> #include <linux/irqbypass.h> #include <linux/sched/stat.h> +#include <linux/mem_encrypt.h> #include <trace/events/kvm.h>
@@ -6113,7 +6114,7 @@ int kvm_arch_init(void *opaque)kvm_mmu_set_mask_ptes (PT_USER_MASK ,PT_ACCESSED_MASK ,PT_DIRTY_MASK ,PT64_NX_MASK ,0 , -PT_PRESENT_MASK ,0 ); +PT_PRESENT_MASK ,0 , sme_me_mask);kvm_timer_init ();perf_register_guest_info_callbacks (&kvm_guest_cbs);
Signature · 7 lines
1.9.1 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
tip-bot for Tom Lendacky
merge bot[tip:x86/mm] kvm/x86/svm: Support Secure Memory Encryption within KVM
kvm/x86/svm: Support Secure Memory Encryption within KVM
Commit-ID: d0ec49d4de90806755e17289bd48464a1a515823 Gitweb: http://git.kernel.org/tip/d0ec49d4de90806755e17289bd48464a1a515823 Author: Tom Lendacky <[email protected]> AuthorDate: Mon, 17 Jul 2017 16:10:27 -0500 Committer: Ingo Molnar <[email protected]> CommitDate: Tue, 18 Jul 2017 11:38:04 +0200
kvm/x86/svm: Support Secure Memory Encryption within KVM
Update the KVM support to work with SME. The VMCB has a number of fields where physical addresses are used and these addresses must contain the memory encryption mask in order to properly access the encrypted memory. Also, use the memory encryption mask when creating and using the nested page tables.
--- arch/x86/include/asm/kvm_host.h | 2 +- arch/x86/kvm/mmu.c | 11 +++++++---- arch/x86/kvm/mmu.h | 2 +- arch/x86/kvm/svm.c | 35 ++++++++++++++++++----------------- arch/x86/kvm/vmx.c | 2 +- arch/x86/kvm/x86.c | 3 ++- 6 files changed, 30 insertions(+), 25 deletions(-)
arch/x86/include/asm/kvm_host.h +1 -1
@@ -1078,7 +1078,7 @@ void kvm_mmu_init_vm(struct kvm *kvm);void kvm_mmu_uninit_vm (struct kvm *kvm);void kvm_mmu_set_mask_ptes (u64 user_mask,u64 accessed_mask,u64 dirty_mask,u64 nx_mask,u64 x_mask,u64 p_mask, -u64 acc_track_mask); +u64 acc_track_mask,u64 me_mask);void kvm_mmu_reset_context (struct kvm_vcpu *vcpu); void kvm_mmu_slot_remove_write_access(struct kvm *kvm,
arch/x86/kvm/mmu.c +7 -4
@@ -108,7 +108,7 @@ module_param(dbg, bool, 0644); (((address) >> PT32_LEVEL_SHIFT(level)) & ((1 << PT32_LEVEL_BITS) - 1)) -#define PT64_BASE_ADDR_MASK (((1ULL << 52) - 1) & ~(u64)(PAGE_SIZE-1)) +#define PT64_BASE_ADDR_MASK __sme_clr((((1ULL << 52) - 1) & ~(u64)(PAGE_SIZE-1)))#define PT64_DIR_BASE_ADDR_MASK \ (PT64_BASE_ADDR_MASK & ~((1ULL << (PAGE_SHIFT + PT64_LEVEL_BITS)) - 1))#define PT64_LVL_ADDR_MASK (level) \
@@ -126,7 +126,7 @@ module_param(dbg, bool, 0644); * PT32_LEVEL_BITS))) - 1))#define PT64_PERM_MASK (PT_PRESENT_MASK | PT_WRITABLE_MASK | shadow_user_mask \ - | shadow_x_mask | shadow_nx_mask) + | shadow_x_mask | shadow_nx_mask | shadow_me_mask)#define ACC_EXEC_MASK 1#define ACC_WRITE_MASK PT_WRITABLE_MASK
@@ -186,6 +186,7 @@ static u64 __read_mostly shadow_dirty_mask;static u64 __read_mostly shadow_mmio_mask;static u64 __read_mostly shadow_mmio_value;static u64 __read_mostly shadow_present_mask; +static u64 __read_mostly shadow_me_mask;/* * SPTEs used by MMUs without A/D bits are marked with shadow_acc_track_value.
@@ -349,7 +350,7 @@ static bool check_mmio_spte(struct kvm_vcpu *vcpu, u64 spte)*/ void kvm_mmu_set_mask_ptes (u64 user_mask,u64 accessed_mask,u64 dirty_mask,u64 nx_mask,u64 x_mask,u64 p_mask, -u64 acc_track_mask) +u64 acc_track_mask,u64 me_mask) {BUG_ON (!dirty_mask != !accessed_mask);BUG_ON (!accessed_mask && !acc_track_mask);
@@ -362,6 +363,7 @@ void kvm_mmu_set_mask_ptes(u64 user_mask, u64 accessed_mask, shadow_x_mask = x_mask; shadow_present_mask = p_mask; shadow_acc_track_mask = acc_track_mask; + shadow_me_mask = me_mask; }EXPORT_SYMBOL_GPL (kvm_mmu_set_mask_ptes);
@@ -2433,7 +2435,7 @@ static void link_shadow_page(struct kvm_vcpu *vcpu, u64 *sptep,BUILD_BUG_ON (VMX_EPT_WRITABLE_MASK !=PT_WRITABLE_MASK ); spte =__pa (sp->spt) | shadow_present_mask |PT_WRITABLE_MASK | - shadow_user_mask | shadow_x_mask; + shadow_user_mask | shadow_x_mask | shadow_me_mask;if (sp_ad_disabled (sp)) spte |= shadow_acc_track_value;
@@ -2745,6 +2747,7 @@ static int set_spte(struct kvm_vcpu *vcpu, u64 *sptep, pte_access &= ~ACC_WRITE_MASK ; spte |= (u64 )pfn <<PAGE_SHIFT ; + spte |= shadow_me_mask;if (pte_access &ACC_WRITE_MASK ) {
arch/x86/kvm/mmu.h +1 -1
@@ -48,7 +48,7 @@static inline u64 rsvd_bits (int s,int e) { -return ((1ULL << (e - s +1 )) -1 ) << s; +return __sme_clr (((1ULL << (e - s +1 )) -1 ) << s); }void kvm_mmu_set_mmio_spte_mask (u64 mmio_mask,u64 mmio_value);
arch/x86/kvm/svm.c +18 -17
@@ -1167,9 +1167,9 @@ static void avic_init_vmcb(struct vcpu_svm *svm) {struct vmcb *vmcb = svm->vmcb;struct kvm_arch *vm_data = &svm->vcpu.kvm->arch; -phys_addr_t bpa =page_to_phys (svm->avic_backing_page); -phys_addr_t lpa =page_to_phys (vm_data->avic_logical_id_table_page); -phys_addr_t ppa =page_to_phys (vm_data->avic_physical_id_table_page); +phys_addr_t bpa =__sme_set (page_to_phys (svm->avic_backing_page)); +phys_addr_t lpa =__sme_set (page_to_phys (vm_data->avic_logical_id_table_page)); +phys_addr_t ppa =__sme_set (page_to_phys (vm_data->avic_physical_id_table_page)); vmcb->control.avic_backing_page = bpa &AVIC_HPA_MASK ; vmcb->control.avic_logical_id = lpa &AVIC_HPA_MASK ;
@@ -1232,8 +1232,8 @@ static void init_vmcb(struct vcpu_svm *svm)set_intercept (svm,INTERCEPT_MWAIT ); } - control->iopm_base_pa = iopm_base; - control->msrpm_base_pa =__pa (svm->msrpm); + control->iopm_base_pa =__sme_set (iopm_base); + control->msrpm_base_pa =__sme_set (__pa (svm->msrpm)); control->int_ctl =V_INTR_MASKING_MASK ;init_seg (&save->es);
@@ -1377,9 +1377,9 @@ static int avic_init_backing_page(struct kvm_vcpu *vcpu)return -EINVAL ; new_entry =READ_ONCE (*entry); - new_entry = (page_to_phys (svm->avic_backing_page) & -AVIC_PHYSICAL_ID_ENTRY_BACKING_PAGE_MASK ) | -AVIC_PHYSICAL_ID_ENTRY_VALID_MASK ; + new_entry =__sme_set ((page_to_phys (svm->avic_backing_page) & +AVIC_PHYSICAL_ID_ENTRY_BACKING_PAGE_MASK ) | +AVIC_PHYSICAL_ID_ENTRY_VALID_MASK );WRITE_ONCE (*entry, new_entry); svm->avic_physical_id_cache = entry;
@@ -1647,7 +1647,7 @@ static struct kvm_vcpu *svm_create_vcpu(struct kvm *kvm, unsigned int id) svm->vmcb =page_address (page);clear_page (svm->vmcb); - svm->vmcb_pa =page_to_pfn (page) <<PAGE_SHIFT ; + svm->vmcb_pa =__sme_set (page_to_pfn (page) <<PAGE_SHIFT ); svm->asid_generation =0 ;init_vmcb (svm);
@@ -1675,7 +1675,7 @@ static void svm_free_vcpu(struct kvm_vcpu *vcpu) {struct vcpu_svm *svm =to_svm (vcpu); -__free_page (pfn_to_page (svm->vmcb_pa >>PAGE_SHIFT )); +__free_page (pfn_to_page (__sme_clr (svm->vmcb_pa) >>PAGE_SHIFT ));__free_pages (virt_to_page (svm->msrpm),MSRPM_ALLOC_ORDER );__free_page (virt_to_page (svm->nested.hsave));__free_pages (virt_to_page (svm->nested.msrpm),MSRPM_ALLOC_ORDER );
@@ -2335,7 +2335,7 @@ static u64 nested_svm_get_tdp_pdptr(struct kvm_vcpu *vcpu, int index)u64 pdpte;int ret; - ret =kvm_vcpu_read_guest_page (vcpu,gpa_to_gfn (cr3), &pdpte, + ret =kvm_vcpu_read_guest_page (vcpu,gpa_to_gfn (__sme_clr (cr3)), &pdpte,offset_in_page (cr3) + index *8 ,8 );if (ret)return 0 ;
@@ -2347,7 +2347,7 @@ static void nested_svm_set_tdp_cr3(struct kvm_vcpu *vcpu, {struct vcpu_svm *svm =to_svm (vcpu); - svm->vmcb->control.nested_cr3 = root; + svm->vmcb->control.nested_cr3 =__sme_set (root);mark_dirty (svm->vmcb,VMCB_NPT );svm_flush_tlb (vcpu); }
@@ -2868,7 +2868,7 @@ static bool nested_svm_vmrun_msrpm(struct vcpu_svm *svm) svm->nested.msrpm[p] = svm->msrpm[p] | value; } - svm->vmcb->control.msrpm_base_pa =__pa (svm->nested.msrpm); + svm->vmcb->control.msrpm_base_pa =__sme_set (__pa (svm->nested.msrpm));return true; }
@@ -4501,7 +4501,7 @@ get_pi_vcpu_info(struct kvm *kvm, struct kvm_kernel_irq_routing_entry *e,pr_debug ("SVM: %s: use GA mode for irq %u\n" , __func__, irq.vector); *svm =to_svm (vcpu); - vcpu_info->pi_desc_addr =page_to_phys ((*svm)->avic_backing_page); + vcpu_info->pi_desc_addr =__sme_set (page_to_phys ((*svm)->avic_backing_page)); vcpu_info->vector = irq.vector;return 0 ;
@@ -4552,7 +4552,8 @@ static int svm_update_pi_irte(struct kvm *kvm, unsigned int host_irq,struct amd_iommu_pi_data pi;/* Try to enable guest_mode in IRTE */ - pi.base =page_to_phys (svm->avic_backing_page) &AVIC_HPA_MASK ; + pi.base =__sme_set (page_to_phys (svm->avic_backing_page) & +AVIC_HPA_MASK ); pi.ga_tag =AVIC_GATAG (kvm->arch.avic_vm_id, svm->vcpu.vcpu_id); pi.is_guest_mode = true;
@@ -5001,7 +5002,7 @@ static void svm_set_cr3(struct kvm_vcpu *vcpu, unsigned long root) {struct vcpu_svm *svm =to_svm (vcpu); - svm->vmcb->save.cr3 = root; + svm->vmcb->save.cr3 =__sme_set (root);mark_dirty (svm->vmcb,VMCB_CR );svm_flush_tlb (vcpu); }
@@ -5010,7 +5011,7 @@ static void set_tdp_cr3(struct kvm_vcpu *vcpu, unsigned long root) {struct vcpu_svm *svm =to_svm (vcpu); - svm->vmcb->control.nested_cr3 = root; + svm->vmcb->control.nested_cr3 =__sme_set (root);mark_dirty (svm->vmcb,VMCB_NPT );/* Also sync guest cr3 here in case we live migrate */
arch/x86/kvm/vmx.c +1 -1
@@ -6492,7 +6492,7 @@ void vmx_enable_tdp(void) enable_ept_ad_bits ?VMX_EPT_DIRTY_BIT :0ull ,0ull ,VMX_EPT_EXECUTABLE_MASK ,cpu_has_vmx_ept_execute_only () ?0ull :VMX_EPT_READABLE_MASK , - VMX_EPT_RWX_MASK); + VMX_EPT_RWX_MASK, 0ull);ept_set_mmio_spte_mask ();kvm_enable_tdp ();
arch/x86/kvm/x86.c +2 -1
@@ -54,6 +54,7 @@#include <linux/kvm_irqfd.h> #include <linux/irqbypass.h> #include <linux/sched/stat.h> +#include <linux/mem_encrypt.h> #include <trace/events/kvm.h>
@@ -6113,7 +6114,7 @@ int kvm_arch_init(void *opaque)kvm_mmu_set_mask_ptes (PT_USER_MASK ,PT_ACCESSED_MASK ,PT_DIRTY_MASK ,PT64_NX_MASK ,0 , -PT_PRESENT_MASK ,0 ); +PT_PRESENT_MASK ,0 , sme_me_mask);kvm_timer_init ();perf_register_guest_info_callbacks (&kvm_guest_cbs);
PATCH v10 31/38 x86/mm, kexec: Allow kexec to be used with SME
In reply to Tom LendackyProvide support so that kexec can be used to boot a kernel when SME is enabled.
Support is needed to allocate pages for kexec without encryption. This is needed in order to be able to reboot in the kernel in the same manner as originally booted.
Additionally, when shutting down all of the CPUs we need to be sure to flush the caches and then halt. This is needed when booting from a state where SME was not active into a state where SME is active (or vice-versa). Without these steps, it is possible for cache lines to exist for the same physical location but tagged both with and without the encryption bit. This can cause random memory corruption when caches are flushed depending on which cacheline is written last.
--- arch/x86/include/asm/init.h | 1 + arch/x86/include/asm/kexec.h | 8 ++++++++ arch/x86/include/asm/pgtable_types.h | 1 + arch/x86/kernel/machine_kexec_64.c | 22 +++++++++++++++++++++- arch/x86/kernel/process.c | 17 +++++++++++++++-- arch/x86/mm/ident_map.c | 12 ++++++++---- include/linux/kexec.h | 8 ++++++++ kernel/kexec_core.c | 12 +++++++++++- 8 files changed, 73 insertions(+), 8 deletions(-)
arch/x86/include/asm/init.h +1 -0
@@ -7,6 +7,7 @@ struct x86_mapping_info {unsigned long page_flag;/* page flag for PMD or PUD entry */ unsigned long offset;/* ident mapping offset */ bool direct_gbpages;/* PUD level 1GB page support */ +unsigned long kernpg_flag;/* kernel pagetable flag override */ }; int kernel_ident_mapping_init(struct x86_mapping_info *info, pgd_t *pgd_page,
arch/x86/include/asm/kexec.h +8 -0
@@ -207,6 +207,14 @@ struct kexec_entry64_regs {uint64_t r15; uint64_t rip; }; + +extern int arch_kexec_post_alloc_pages (void *vaddr,unsigned int pages, +gfp_t gfp); +#define arch_kexec_post_alloc_pages arch_kexec_post_alloc_pages + +extern void arch_kexec_pre_free_pages (void *vaddr,unsigned int pages); +#define arch_kexec_pre_free_pages arch_kexec_pre_free_pages +#endif typedef void crash_vmclear_fn (void );
arch/x86/include/asm/pgtable_types.h +1 -0
@@ -213,6 +213,7 @@ enum page_cache_mode {#define PAGE_KERNEL __pgprot(__PAGE_KERNEL | _PAGE_ENC)#define PAGE_KERNEL_RO __pgprot(__PAGE_KERNEL_RO | _PAGE_ENC)#define PAGE_KERNEL_EXEC __pgprot(__PAGE_KERNEL_EXEC | _PAGE_ENC) +#define PAGE_KERNEL_EXEC_NOENC __pgprot(__PAGE_KERNEL_EXEC)#define PAGE_KERNEL_RX __pgprot(__PAGE_KERNEL_RX | _PAGE_ENC)#define PAGE_KERNEL_NOCACHE __pgprot(__PAGE_KERNEL_NOCACHE | _PAGE_ENC)#define PAGE_KERNEL_LARGE __pgprot(__PAGE_KERNEL_LARGE | _PAGE_ENC)
arch/x86/kernel/machine_kexec_64.c +21 -1
@@ -87,7 +87,7 @@ static int init_transition_pgtable(struct kimage *image, pgd_t *pgd)set_pmd (pmd,__pmd (__pa (pte) | _KERNPG_TABLE)); } pte =pte_offset_kernel (pmd, vaddr); -set_pte (pte,pfn_pte (paddr >>PAGE_SHIFT ,PAGE_KERNEL_EXEC )); +set_pte (pte,pfn_pte (paddr >>PAGE_SHIFT ,PAGE_KERNEL_EXEC_NOENC ));return 0 ; err:free_transition_pgtable (image);
@@ -115,6 +115,7 @@ static int init_pgtable(struct kimage *image, unsigned long start_pgtable) .alloc_pgt_page = alloc_pgt_page, .context = image, .page_flag = __PAGE_KERNEL_LARGE_EXEC, + .kernpg_flag = _KERNPG_TABLE_NOENC, };unsigned long mstart, mend;pgd_t *level4p;
@@ -602,3 +603,22 @@ void arch_kexec_unprotect_crashkres(void) {kexec_mark_crashkres (false); } + +int arch_kexec_post_alloc_pages (void *vaddr,unsigned int pages,gfp_t gfp) +{ +/* +* If SME is active we need to be sure that kexec pages are +* not encrypted because when we boot to the new kernel the +* pages won't be accessed encrypted (initially). +*/ +return set_memory_decrypted ((unsigned long )vaddr, pages); +} + +void arch_kexec_pre_free_pages (void *vaddr,unsigned int pages) +{ +/* +* If SME is active we need to reset the pages back to being +* an encrypted mapping before freeing them. +*/ +set_memory_encrypted ((unsigned long )vaddr, pages); +}
arch/x86/kernel/process.c +15 -2
@@ -355,6 +355,7 @@ bool xen_set_default_idle(void) return ret; }#endif +void stop_this_cpu (void *dummy) {local_irq_disable ();
@@ -365,8 +366,20 @@ void stop_this_cpu(void *dummy)disable_local_APIC ();mcheck_cpu_clear (this_cpu_ptr (&cpu_info)); -for (;;) -halt (); +for (;;) { +/* +* Use wbinvd followed by hlt to stop the processor. This +* provides support for kexec on a processor that supports +* SME. With kexec, going from SME inactive to SME active +* requires clearing cache entries so that addresses without +* the encryption bit set don't corrupt the same physical +* address that has the encryption bit set when caches are +* flushed. To achieve this a wbinvd is performed followed by +* a hlt. Even if the processor is not in the kexec/SME +* scenario this only adds a wbinvd to a halting processor. +*/ + asmvolatile ("wbinvd; hlt" : : :"memory" ); + } }/*
arch/x86/mm/ident_map.c +8 -4
@@ -51,7 +51,7 @@ static int ident_pud_init(struct x86_mapping_info *info, pud_t *pud_page,if (!pmd)return -ENOMEM ;ident_pmd_init (info, pmd, addr, next); -set_pud (pud,__pud (__pa (pmd) | _KERNPG_TABLE)); +set_pud (pud,__pud (__pa (pmd) | info->kernpg_flag)); }return 0 ;
@@ -79,7 +79,7 @@ static int ident_p4d_init(struct x86_mapping_info *info, p4d_t *p4d_page,if (!pud)return -ENOMEM ;ident_pud_init (info, pud, addr, next); -set_p4d (p4d,__p4d (__pa (pud) | _KERNPG_TABLE)); +set_p4d (p4d,__p4d (__pa (pud) | info->kernpg_flag)); }return 0 ;
@@ -93,6 +93,10 @@ int kernel_ident_mapping_init(struct x86_mapping_info *info, pgd_t *pgd_page,unsigned long next;int result; +/* Set the default pagetable flags if not supplied */ +if (!info->kernpg_flag) + info->kernpg_flag = _KERNPG_TABLE; +for (; addr < end; addr = next) {pgd_t *pgd = pgd_page +pgd_index (addr);p4d_t *p4d;
@@ -116,14 +120,14 @@ int kernel_ident_mapping_init(struct x86_mapping_info *info, pgd_t *pgd_page,if (result)return result;if (IS_ENABLED (CONFIG_X86_5LEVEL )) { -set_pgd (pgd,__pgd (__pa (p4d) | _KERNPG_TABLE)); +set_pgd (pgd,__pgd (__pa (p4d) | info->kernpg_flag)); }else {/* * With p4d folded, pgd is equal to p4d. * The pgd entry has to point to the pud page table in this case. */ pud_t *pud =pud_offset (p4d,0 ); -set_pgd (pgd,__pgd (__pa (pud) | _KERNPG_TABLE)); +set_pgd (pgd,__pgd (__pa (pud) | info->kernpg_flag)); } }
include/linux/kexec.h +8 -0
@@ -327,6 +327,14 @@ static inline void *boot_phys_to_virt(unsigned long entry) return phys_to_virt(boot_phys_to_phys(entry)); } +#ifndef arch_kexec_post_alloc_pages +static inline int arch_kexec_post_alloc_pages (void *vaddr,unsigned int pages,gfp_t gfp) {return 0 ; } +#endif + +#ifndef arch_kexec_pre_free_pages +static inline void arch_kexec_pre_free_pages (void *vaddr,unsigned int pages) { } +#endif +#else /* !CONFIG_KEXEC_CORE */ struct pt_regs ;struct task_struct ;
kernel/kexec_core.c +11 -1
@@ -301,7 +301,7 @@ static struct page *kimage_alloc_pages(gfp_t gfp_mask, unsigned int order) {struct page *pages; - pages =alloc_pages (gfp_mask, order); + pages =alloc_pages (gfp_mask & ~__GFP_ZERO, order);if (pages) {unsigned int count, i;
@@ -310,6 +310,13 @@ static struct page *kimage_alloc_pages(gfp_t gfp_mask, unsigned int order) count =1 << order;for (i =0 ; i < count; i++)SetPageReserved (pages + i); + +arch_kexec_post_alloc_pages (page_address (pages), count, + gfp_mask); + +if (gfp_mask & __GFP_ZERO) +for (i =0 ; i < count; i++) +clear_highpage (pages + i); }return pages;
@@ -321,6 +328,9 @@ static void kimage_free_pages(struct page *page) order =page_private (page); count =1 << order; + +arch_kexec_pre_free_pages (page_address (page), count); +for (i =0 ; i < count; i++)ClearPageReserved (page + i);__free_pages (page, order);
Signature · 1 line
1.9.1