core-image-minimal-initramfs: use initramfs-framework for initialization by default

new file mode 100644
index 0000000..ec4a139
@@ -0,0 +1,66 @@
+#/bin/sh
+# Copyright (C) 2011 O.S. Systems Software LTDA.
+# Licensed on MIT
+
+setup_enabled() {
+	return 0
+}
+
+setup_run() {
+ROOT_IMAGE="rootfs.img"
+ISOLINUX=""
+ROOT_DISK=""
+shelltimeout=30
+
+	if [ -z $bootparam_root ]; then
+		echo "Waiting for removable media..."
+		C=0
+		while true
+		do
+		  for i in `ls /run/media 2>/dev/null`; do
+		      if [ -f /run/media/$i/$ROOT_IMAGE ] ; then
+				found="yes"
+				ROOT_DISK="$i"
+				break
+			  elif [ -f /run/media/$i/isolinux/$ROOT_IMAGE ]; then
+				found="yes"
+				ISOLINUX="isolinux"
+				ROOT_DISK="$i"
+				break
+		      fi
+		  done
+		  if [ "$found" = "yes" ]; then
+		      break;
+		  fi
+		  # don't wait for more than $shelltimeout seconds, if it's set
+		  if [ -n "$shelltimeout" ]; then
+		      echo -n " " $(( $shelltimeout - $C ))
+		      if [ $C -ge $shelltimeout ]; then
+		           echo "..."
+			   echo "Mounted filesystems"
+		           mount | grep media
+		           echo "Available block devices"
+		           cat /proc/partitions
+		           fatal "Cannot find $ROOT_IMAGE file in /run/media/* , dropping to a shell "
+		      fi
+		      C=$(( C + 1 ))
+		  fi
+		  sleep 1
+		done
+		# The existing rootfs module has no support for rootfs images. Assign the rootfs image.
+		bootparam_root="/run/media/$ROOT_DISK/$ISOLINUX/$ROOT_IMAGE"
+	else
+		break
+	fi
+
+	if [ "$bootparam_LABEL" != "boot" -a -f /init.d/$bootparam_LABEL.sh ] ; then
+		if [ -f /run/media/$i/$ISOLINUX/$ROOT_IMAGE ] ; then
+		    ./init.d/$bootparam_LABEL.sh $i/$ISOLINUX $ROOT_IMAGE $video_mode $vga_mode $console_params
+		else
+		    fatal "Could not find $bootparam_LABEL script"
+		fi
+
+		# If we're getting here, we failed...
+		fatal "Target $bootparam_LABEL failed"
+	fi
+}

index 67a1b04..211e89d 100644
@@ -13,7 +13,8 @@ SRC_URI = "file://init \
            file://mdev \
            file://udev \
            file://e2fs \
-           file://debug"
+           file://debug \
+           file://setup-live"
 
 S = "${WORKDIR}"
 

@@ -25,6 +26,9 @@ do_install() {
     install -m 0755 ${WORKDIR}/rootfs ${D}/init.d/90-rootfs
     install -m 0755 ${WORKDIR}/finish ${D}/init.d/99-finish
 
+    # setup-live
+    install -m 0755 ${WORKDIR}/setup-live ${D}/init.d/80-setup-live
+
     # mdev
     install -m 0755 ${WORKDIR}/mdev ${D}/init.d/01-mdev
 

@@ -48,7 +52,8 @@ PACKAGES = "${PN}-base \
             initramfs-module-udev \
             initramfs-module-e2fs \
             initramfs-module-rootfs \
-            initramfs-module-debug"
+            initramfs-module-debug \
+            initramfs-module-setup-live"
 
 FILES_${PN}-base = "/init /init.d/99-finish /dev"
 

@@ -68,6 +73,10 @@ SUMMARY_initramfs-module-udev = "initramfs support for udev"
 RDEPENDS_initramfs-module-udev = "${PN}-base udev"
 FILES_initramfs-module-udev = "/init.d/01-udev"
 
+SUMMARY_initramfs-module-setup-live = "initramfs support for setup live"
+RDEPENDS_initramfs-module-setup-live = "${PN}-base udev-extraconf"
+FILES_initramfs-module-setup-live = "/init.d/80-setup-live"
+
 SUMMARY_initramfs-module-e2fs = "initramfs support for ext4/ext3/ext2 filesystems"
 RDEPENDS_initramfs-module-e2fs = "${PN}-base"
 FILES_initramfs-module-e2fs = "/init.d/10-e2fs"

new file mode 100644
index 0000000..5ad3a60
@@ -0,0 +1,276 @@
+#!/bin/sh -e
+#
+# Copyright (c) 2012, Intel Corporation.
+# All rights reserved.
+#
+# install.sh [device_name] [rootfs_name]
+#
+
+PATH=/sbin:/bin:/usr/sbin:/usr/bin
+
+# We need 20 Mb for the boot partition
+boot_size=20
+
+# 5% for swap
+swap_ratio=5
+
+# Get a list of hard drives
+hdnamelist=""
+live_dev_name=`cat /proc/mounts | grep ${1%/} | awk '{print $1}'`
+live_dev_name=${live_dev_name#\/dev/}
+# Only strip the digit identifier if the device is not an mmc
+case $live_dev_name in
+    mmcblk*)
+    ;;
+    nvme*)
+    ;;
+    *)
+        live_dev_name=${live_dev_name%%[0-9]*}
+    ;;
+esac
+
+echo "Searching for hard drives ..."
+
+# Some eMMC devices have special sub devices such as mmcblk0boot0 etc
+# we're currently only interested in the root device so pick them wisely
+devices=`ls /sys/block/ | grep -v mmcblk` || true
+mmc_devices=`ls /sys/block/ | grep "mmcblk[0-9]\{1,\}$"` || true
+devices="$devices $mmc_devices"
+
+for device in $devices; do
+    case $device in
+        loop*)
+            # skip loop device
+            ;;
+        sr*)
+            # skip CDROM device
+            ;;
+        ram*)
+            # skip ram device
+            ;;
+        *)
+            # skip the device LiveOS is on
+            # Add valid hard drive name to the list
+            case $device in
+                $live_dev_name*)
+                # skip the device we are running from
+                ;;
+                *)
+                    hdnamelist="$hdnamelist $device"
+                ;;
+            esac
+            ;;
+    esac
+done
+
+if [ -z "${hdnamelist}" ]; then
+    echo "You need another device (besides the live device /dev/${live_dev_name}) to install the image. Installation aborted."
+    exit 1
+fi
+
+TARGET_DEVICE_NAME=""
+for hdname in $hdnamelist; do
+    # Display found hard drives and their basic info
+    echo "-------------------------------"
+    echo /dev/$hdname
+    if [ -r /sys/block/$hdname/device/vendor ]; then
+        echo -n "VENDOR="
+        cat /sys/block/$hdname/device/vendor
+    fi
+    if [ -r /sys/block/$hdname/device/model ]; then
+        echo -n "MODEL="
+        cat /sys/block/$hdname/device/model
+    fi
+    if [ -r /sys/block/$hdname/device/uevent ]; then
+        echo -n "UEVENT="
+        cat /sys/block/$hdname/device/uevent
+    fi
+    echo
+done
+
+# Get user choice
+while true; do
+    echo "Please select an install target or press n to exit ($hdnamelist ): "
+    read answer
+    if [ "$answer" = "n" ]; then
+        echo "Installation manually aborted."
+        exit 1
+    fi
+    for hdname in $hdnamelist; do
+        if [ "$answer" = "$hdname" ]; then
+            TARGET_DEVICE_NAME=$answer
+            break
+        fi
+    done
+    if [ -n "$TARGET_DEVICE_NAME" ]; then
+        break
+    fi
+done
+
+if [ -n "$TARGET_DEVICE_NAME" ]; then
+    echo "Installing image on /dev/$TARGET_DEVICE_NAME ..."
+else
+    echo "No hard drive selected. Installation aborted."
+    exit 1
+fi
+
+device=/dev/$TARGET_DEVICE_NAME
+
+#
+# The udev automounter can cause pain here, kill it
+#
+rm -f /etc/udev/rules.d/automount.rules
+rm -f /etc/udev/scripts/mount*
+
+#
+# Unmount anything the automounter had mounted
+#
+umount ${device}* 2> /dev/null || /bin/true
+
+mkdir -p /tmp
+
+# Create /etc/mtab if not present
+if [ ! -e /etc/mtab ] && [ -e /proc/mounts ]; then
+    ln -sf /proc/mounts /etc/mtab
+fi
+
+disk_size=$(parted ${device} unit mb print | grep '^Disk .*: .*MB' | cut -d" " -f 3 | sed -e "s/MB//")
+
+swap_size=$((disk_size*swap_ratio/100))
+rootfs_size=$((disk_size-boot_size-swap_size))
+
+rootfs_start=$((boot_size))
+rootfs_end=$((rootfs_start+rootfs_size))
+swap_start=$((rootfs_end))
+
+# MMC devices are special in a couple of ways
+# 1) they use a partition prefix character 'p'
+# 2) they are detected asynchronously (need rootwait)
+rootwait=""
+part_prefix=""
+if [ ! "${device#/dev/mmcblk}" = "${device}" ] || \
+   [ ! "${device#/dev/nvme}" = "${device}" ]; then
+    part_prefix="p"
+    rootwait="rootwait"
+fi
+
+# USB devices also require rootwait
+if [ -n `readlink /dev/disk/by-id/usb* | grep $TARGET_DEVICE_NAME` ]; then
+    rootwait="rootwait"
+fi
+
+bootfs=${device}${part_prefix}1
+rootfs=${device}${part_prefix}2
+swap=${device}${part_prefix}3
+
+echo "*****************"
+echo "Boot partition size:   $boot_size MB ($bootfs)"
+echo "Rootfs partition size: $rootfs_size MB ($rootfs)"
+echo "Swap partition size:   $swap_size MB ($swap)"
+echo "*****************"
+echo "Deleting partition table on ${device} ..."
+dd if=/dev/zero of=${device} bs=512 count=35
+
+echo "Creating new partition table on ${device} ..."
+parted ${device} mklabel gpt
+
+echo "Creating boot partition on $bootfs"
+parted ${device} mkpart boot fat32 0% $boot_size
+parted ${device} set 1 boot on
+
+echo "Creating rootfs partition on $rootfs"
+parted ${device} mkpart root ext3 $rootfs_start $rootfs_end
+
+echo "Creating swap partition on $swap"
+parted ${device} mkpart swap linux-swap $swap_start 100%
+
+parted ${device} print
+
+echo "Formatting $bootfs to vfat..."
+mkfs.vfat $bootfs
+
+echo "Formatting $rootfs to ext3..."
+mkfs.ext3 $rootfs
+
+echo "Formatting swap partition...($swap)"
+mkswap $swap
+
+mkdir /tgt_root
+mkdir /src_root
+mkdir -p /boot
+
+# Handling of the target root partition
+mount $rootfs /tgt_root
+mount -o rw,loop,noatime,nodiratime /run/media/$1/$2 /src_root
+echo "Copying rootfs files..."
+cp -a /src_root/* /tgt_root
+if [ -d /tgt_root/etc/ ] ; then
+    boot_uuid=$(blkid -o value -s UUID ${bootfs})
+    swap_part_uuid=$(blkid -o value -s PARTUUID ${swap})
+    echo "/dev/disk/by-partuuid/$swap_part_uuid                swap             swap       defaults              0  0" >> /tgt_root/etc/fstab
+    echo "UUID=$boot_uuid              /boot            vfat       defaults              1  2" >> /tgt_root/etc/fstab
+    # We dont want udev to mount our root device while we're booting...
+    if [ -d /tgt_root/etc/udev/ ] ; then
+        echo "${device}" >> /tgt_root/etc/udev/mount.blacklist
+    fi
+fi
+
+umount /src_root
+
+# Handling of the target boot partition
+mount $bootfs /boot
+echo "Preparing boot partition..."
+
+EFIDIR="/boot/EFI/BOOT"
+mkdir -p $EFIDIR
+# Copy the efi loader
+cp /run/media/$1/EFI/BOOT/*.efi $EFIDIR
+
+if [ -f /run/media/$1/EFI/BOOT/grub.cfg ]; then
+    root_part_uuid=$(blkid -o value -s PARTUUID ${rootfs})
+    GRUBCFG="$EFIDIR/grub.cfg"
+    cp /run/media/$1/EFI/BOOT/grub.cfg $GRUBCFG
+    # Update grub config for the installed image
+    # Delete the install entry
+    sed -i "/menuentry 'install'/,/^}/d" $GRUBCFG
+    # Delete the initrd lines
+    sed -i "/initrd /d" $GRUBCFG
+    # Delete any LABEL= strings
+    sed -i "s/ LABEL=[^ ]*/ /" $GRUBCFG
+    # Delete any root= strings
+    sed -i "s/ root=[^ ]*/ /g" $GRUBCFG
+    # Add the root= and other standard boot options
+    sed -i "s@linux /vmlinuz *@linux /vmlinuz root=PARTUUID=$root_part_uuid rw $rootwait quiet @" $GRUBCFG
+fi
+
+if [ -d /run/media/$1/loader ]; then
+    rootuuid=$(blkid -o value -s PARTUUID ${rootfs})
+    SYSTEMDBOOT_CFGS="/boot/loader/entries/*.conf"
+    # copy config files for systemd-boot
+    cp -dr /run/media/$1/loader /boot
+    # delete the install entry
+    rm -f /boot/loader/entries/install.conf
+    # delete the initrd lines
+    sed -i "/initrd /d" $SYSTEMDBOOT_CFGS
+    # delete any LABEL= strings
+    sed -i "s/ LABEL=[^ ]*/ /" $SYSTEMDBOOT_CFGS
+    # delete any root= strings
+    sed -i "s/ root=[^ ]*/ /" $SYSTEMDBOOT_CFGS
+    # add the root= and other standard boot options
+    sed -i "s@options *@options root=PARTUUID=$rootuuid rw $rootwait quiet @" $SYSTEMDBOOT_CFGS
+fi
+
+umount /tgt_root
+
+cp /run/media/$1/vmlinuz /boot
+
+umount /boot
+
+sync
+
+echo "Remove your installation media, and press ENTER"
+
+read enter
+
+echo "Rebooting..."
+reboot -f

index 211e89d..9d69a69 100644
@@ -5,7 +5,11 @@ RDEPENDS_${PN} += "${VIRTUAL-RUNTIME_base-utils}"
 
 PR = "r2"
 
-inherit allarch
+# While the packages maybe an allarch due to it being a
+# simple script, reality is that it is Host specific based
+# on the COMPATIBLE_HOST below, which needs to take precedence
+#inherit allarch
+INHIBIT_DEFAULT_DEPS = "1"
 
 SRC_URI = "file://init \
            file://rootfs \

@@ -14,7 +18,8 @@ SRC_URI = "file://init \
            file://udev \
            file://e2fs \
            file://debug \
-           file://setup-live"
+           file://setup-live \
+           file://install-efi.sh"
 
 S = "${WORKDIR}"
 

@@ -41,6 +46,9 @@ do_install() {
     # debug
     install -m 0755 ${WORKDIR}/debug ${D}/init.d/00-debug
 
+    # install-efi
+    install -m 0755 ${WORKDIR}/install-efi.sh ${D}/init.d/install-efi.sh
+
     # Create device nodes expected by some kernels in initramfs
     # before even executing /init.
     install -d ${D}/dev

@@ -53,7 +61,8 @@ PACKAGES = "${PN}-base \
             initramfs-module-e2fs \
             initramfs-module-rootfs \
             initramfs-module-debug \
-            initramfs-module-setup-live"
+            initramfs-module-setup-live \
+            initramfs-module-install-efi"
 
 FILES_${PN}-base = "/init /init.d/99-finish /dev"
 

@@ -88,3 +97,7 @@ FILES_initramfs-module-rootfs = "/init.d/90-rootfs"
 SUMMARY_initramfs-module-debug = "initramfs dynamic debug support"
 RDEPENDS_initramfs-module-debug = "${PN}-base"
 FILES_initramfs-module-debug = "/init.d/00-debug"
+
+SUMMARY_initramfs-module-install-efi = "initramfs support for installation option"
+RDEPENDS_initramfs-module-install-efi = "${PN}-base parted e2fsprogs-mke2fs dosfstools util-linux-blkid"
+FILES_initramfs-module-install-efi = "/init.d/install-efi.sh"

index 5794a25..c1f2855 100644
@@ -3,7 +3,7 @@ DESCRIPTION = "Small image capable of booting a device. The kernel includes \
 the Minimal RAM-based Initial Root Filesystem (initramfs), which finds the \
 first 'init' program more efficiently."
 
-PACKAGE_INSTALL = "initramfs-live-boot initramfs-live-install initramfs-live-install-efi ${VIRTUAL-RUNTIME_base-utils} udev base-passwd ${ROOTFS_BOOTSTRAP_INSTALL}"
+PACKAGE_INSTALL = "initramfs-framework-base initramfs-module-udev initramfs-module-setup-live initramfs-module-install-efi ${VIRTUAL-RUNTIME_base-utils} udev base-passwd ${ROOTFS_BOOTSTRAP_INSTALL}"
 
 # Do not pollute the initrd image with rootfs features
 IMAGE_FEATURES = ""

index 591c93a..b98a321 100644
@@ -12,7 +12,7 @@ ISOLINUX=""
 ROOT_DISK=""
 shelltimeout=30
 
-	if [ -z $bootparam_root ]; then
+	if [ -z $bootparam_root -o $bootparam_root = "/dev/ram0" ]; then
 		echo "Waiting for removable media..."
 		C=0
 		while true