Support Physical Layer Scrambling
Subsystems (2)
cover Support Physical Layer Scrambling
A new property DTV_SCRAMBLING_SEQUENCE_INDEX introduced to control the gold sequence that several demods support.
Also the DVB API was increased in order userspace to be aware of the changes.
The stv090x driver was changed to make use of the new property.
Those commits based on discussion previously made on the mailling list.
https://www.mail-archive.com/[email protected]/msg122600.html
I would like to thanks Ralph Metzler ([email protected]) for the great help and ideas he provide me in order create those patches.
Athanasios Oikonomou (2):
media: dvb_frontend: add physical layer scrambling support
media: stv090x: add physical layer scrambling support
.../media/uapi/dvb/fe_property_parameters.rst | 18 ++++++++++++++++++ .../uapi/dvb/frontend-property-satellite-systems.rst | 2 ++ drivers/media/dvb-core/dvb_frontend.c | 12 ++++++++++++ drivers/media/dvb-core/dvb_frontend.h | 5 +++++ drivers/media/dvb-frontends/stv090x.c | 16 ++++++++++++++++ include/uapi/linux/dvb/frontend.h | 5 ++++- include/uapi/linux/dvb/version.h | 2 +- 7 files changed, 58 insertions(+), 2 deletions(-)
Signature · 1 line
2.1.4
PATCH 1/2 media: dvb_frontend: add physical layer scrambling support
This commit adds a new property DTV_SCRAMBLING_SEQUENCE_INDEX.
This 18 bit field, when present, carries the index of the DVB-S2 physical layer scrambling sequence as defined in clause 5.5.4 of EN 302 307. There is no explicit signalling method to convey scrambling sequence index to the receiver. If S2 satellite delivery system descriptor is available it can be used to read the scrambling sequence index (EN 300 468 table 41).
By default, gold scrambling sequence index 0 is used. The valid scrambling sequence index range is from 0 to 262142.
Increase the DVB API version in order userspace to be aware of the changes.
--- .../media/uapi/dvb/fe_property_parameters.rst | 18 ++++++++++++++++++ .../uapi/dvb/frontend-property-satellite-systems.rst | 2 ++ drivers/media/dvb-core/dvb_frontend.c | 12 ++++++++++++ drivers/media/dvb-core/dvb_frontend.h | 5 +++++ include/uapi/linux/dvb/frontend.h | 5 ++++- include/uapi/linux/dvb/version.h | 2 +- 6 files changed, 42 insertions(+), 2 deletions(-)
Documentation/media/uapi/dvb/fe_property_parameters.rst +18 -0
@@ -987,3 +987,21 @@ Possible values: 0, 1, LNA_AUTO 1, LNA on use the special macro LNA_AUTO to set LNA auto + + +.. _DTV-SCRAMBLING-SEQUENCE-INDEX: + +DTV_SCRAMBLING_SEQUENCE_INDEX +============================= + +Used on DVB-S2. + +This 18 bit field, when present, carries the index of the DVB-S2 physical +layer scrambling sequence as defined in clause 5.5.4 of EN 302 307. +There is no explicit signalling method to convey scrambling sequence index +to the receiver. If S2 satellite delivery system descriptor is available +it can be used to read the scrambling sequence index (EN 300 468 table 41). + +By default, gold scrambling sequence index 0 is used. + +The valid scrambling sequence index range is from 0 to 262142.
Documentation/media/uapi/dvb/frontend-property-satellite-systems.rst +2 -0
@@ -60,6 +60,8 @@ following parameters: - :ref:`DTV_STREAM_ID <DTV-STREAM-ID>` +- :ref:`DTV_SCRAMBLING_SEQUENCE_INDEX <DTV-SCRAMBLING-SEQUENCE-INDEX>` + In addition, the :ref:`DTV QoS statistics <frontend-stat-properties>` are also valid.
drivers/media/dvb-core/dvb_frontend.c +12 -0
@@ -982,6 +982,7 @@ static int dvb_frontend_clear_cache(struct dvb_frontend *fe) } c->stream_id =NO_STREAM_ID_FILTER ; + c->scrambling_sequence_index =0 ;/* default sequence */ switch (c->delivery_system) {case SYS_DVBS :
@@ -1072,6 +1073,7 @@ static struct dtv_cmds_h dtv_cmds[DTV_MAX_COMMAND + 1] = {_DTV_CMD (DTV_STREAM_ID ,1 ,0 ),_DTV_CMD (DTV_DVBT2_PLP_ID_LEGACY ,1 ,0 ), +_DTV_CMD (DTV_SCRAMBLING_SEQUENCE_INDEX ,1 ,0 ), _DTV_CMD(DTV_LNA, 1, 0),/* Get */
@@ -1417,6 +1419,11 @@ static int dtv_property_process_get(struct dvb_frontend *fe, tvp->u.data = c->stream_id;break ; +/* Physical layer scrambling support */ +case DTV_SCRAMBLING_SEQUENCE_INDEX : + tvp->u.data = c->scrambling_sequence_index; +break ; +/* ATSC-MH */ case DTV_ATSCMH_FIC_VER : tvp->u.data = fe->dtv_property_cache.atscmh_fic_ver;
@@ -1900,6 +1907,11 @@ static int dtv_property_process_set(struct dvb_frontend *fe, c->stream_id = data;break ; +/* Physical layer scrambling support */ +case DTV_SCRAMBLING_SEQUENCE_INDEX : + c->scrambling_sequence_index = data; +break ; +/* ATSC-MH */ case DTV_ATSCMH_PARADE_ID : fe->dtv_property_cache.atscmh_parade_id = data;
drivers/media/dvb-core/dvb_frontend.h +5 -0
@@ -513,6 +513,8 @@ struct dvb_fe_events {* @layer.interleaving: per layer interleaving. * @stream_id: If different than zero, enable substream filtering, if * hardware supports (DVB-S2 and DVB-T2). +* @scrambling_sequence_index: Carries the index of the DVB-S2 physical layer +* scrambling sequence. * @atscmh_fic_ver: Version number of the FIC (Fast Information Channel) * signaling data (only ATSC-M/H) * @atscmh_parade_id: Parade identification number (only ATSC-M/H)
@@ -591,6 +593,9 @@ struct dtv_frontend_properties {/* Multistream specifics */ u32 stream_id; +/* Physical Layer Scrambling specifics */ +u32 scrambling_sequence_index; +/* ATSC-MH specifics */ u8 atscmh_fic_ver;u8 atscmh_parade_id;
include/uapi/linux/dvb/frontend.h +4 -1
@@ -547,7 +547,10 @@ enum fe_interleaving {#define DTV_STAT_ERROR_BLOCK_COUNT 68#define DTV_STAT_TOTAL_BLOCK_COUNT 69 -#define DTV_MAX_COMMAND DTV_STAT_TOTAL_BLOCK_COUNT +/* Physical layer scrambling */ +#define DTV_SCRAMBLING_SEQUENCE_INDEX 70 + +#define DTV_MAX_COMMAND DTV_SCRAMBLING_SEQUENCE_INDEX/** * enum fe_pilot - Type of pilot tone
include/uapi/linux/dvb/version.h +1 -1
@@ -25,6 +25,6 @@#define _DVBVERSION_H_#define DVB_API_VERSION 5 -#define DVB_API_VERSION_MINOR 10 +#define DVB_API_VERSION_MINOR 11#endif /*_DVBVERSION_H_*/
Signature · 1 line
2.1.4
PATCH 2/2 media: stv090x: add physical layer scrambling support
In reply to Athanasios OikonomouThis commit uses the new property scrambling_sequence_index to control PLS.
By default we are using the gold sequence 0 and only gold sequences expected on the new property.
Please note that all services use PLS, just most with the default sequence 0 and many demods only support gold 0.
--- drivers/media/dvb-frontends/stv090x.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
drivers/media/dvb-frontends/stv090x.c +16 -0
@@ -3429,6 +3429,21 @@ static enum stv090x_signal_state stv090x_algo(struct stv090x_state *state)return -1 ; } +static int stv090x_set_pls (struct stv090x_state *state,u32 pls_code) +{ +dprintk (FE_DEBUG ,1 ,"Set Gold PLS code %d" , pls_code); +if (STV090x_WRITE_DEMOD (state,PLROOT0 , pls_code &0xff ) <0 ) + goto err; +if (STV090x_WRITE_DEMOD (state,PLROOT1 , (pls_code >>8 ) &0xff ) <0 ) + goto err; +if (STV090x_WRITE_DEMOD (state,PLROOT2 ,0x04 | (pls_code >>16 )) <0 ) + goto err; +return 0 ; +err: +dprintk (FE_ERROR ,1 ,"I/O error" ); +return -1 ; +} +static int stv090x_set_mis (struct stv090x_state *state,int mis) {u32 reg;
@@ -3491,6 +3506,7 @@ static enum dvbfe_search stv090x_search(struct dvb_frontend *fe) state->search_range =5000000 ; } +stv090x_set_pls (state, props->scrambling_sequence_index);stv090x_set_mis (state, props->stream_id);if (stv090x_algo (state) == STV090x_RANGEOK) {
Signature · 1 line
2.1.4
cover Support Physical Layer Scrambling
In reply to Athanasios OikonomouQuoted 18 lines · Athanasios Oikonomou
A new property
DTV_SCRAMBLING_SEQUENCE_INDEXintroduced to control the gold sequence that several demods support.Also the DVB API was increased in order userspace to be aware of the changes.
The stv090x driver was changed to make use of the new property.
Those commits based on discussion previously made on the mailling list.
https://www.mail-archive.com/[email protected]/msg122600.htmlI would like to thanks Ralph Metzler ([email protected]) for the great help and ideas he provide me in order create those patches.
Athanasios Oikonomou (2):
media:dvb_frontend: add physical layer scrambling support
media: stv090x: add physical layer scrambling support
Quoted 11 lines
.../media/uapi/dvb/fe_property_parameters.rst | 18 ++++++++++++++++++ .../uapi/dvb/frontend-property-satellite-systems.rst | 2 ++ drivers/media/dvb-core/dvb_frontend.c | 12 ++++++++++++ drivers/media/dvb-core/dvb_frontend.h | 5 +++++ drivers/media/dvb-frontends/stv090x.c | 16 ++++++++++++++++ include/uapi/linux/dvb/frontend.h | 5 ++++- include/uapi/linux/dvb/version.h | 2 +- 7 files changed, 58 insertions(+), 2 deletions(-)Signature · 1 line
2.1.4
We had some thoughts about having a:
#define NO_SCRAMBLING_CODE (~0U)
But DVB-S2 is always scrambling (with default index 0) and other delivery systems can ignore this property. Or do you think it is needed?
One could add a define for AUTO or AUTO_S2X for the standard 7 indices to be tested in DVB-S2X. But either dvb_frontend.c or the demod driver would have to support this in software. I don't think there is a demod which supports this in hardware yet?
Regards,
Ralph
Mauro Carvalho Chehab
maintainerEm Sun, 17 Dec 2017 14:50:37 +0100
Ralph Metzler <[email protected]> escreveu:
Quoted 28 lines
Quoted 27 lines · Athanasios Oikonomou
A new property
DTV_SCRAMBLING_SEQUENCE_INDEXintroduced to control the gold sequence that several demods support.Also the DVB API was increased in order userspace to be aware of the changes.
The stv090x driver was changed to make use of the new property.
Those commits based on discussion previously made on the mailling list.
https://www.mail-archive.com/[email protected]/msg122600.htmlI would like to thanks Ralph Metzler ([email protected]) for the great help and ideas he provide me in order create those patches.
Athanasios Oikonomou (2):
media:dvb_frontend: add physical layer scrambling support
media: stv090x: add physical layer scrambling support.../media/uapi/dvb/fe_property_parameters.rst | 18 ++++++++++++++++++ .../uapi/dvb/frontend-property-satellite-systems.rst | 2 ++ drivers/media/dvb-core/dvb_frontend.c | 12 ++++++++++++ drivers/media/dvb-core/dvb_frontend.h | 5 +++++ drivers/media/dvb-frontends/stv090x.c | 16 ++++++++++++++++ include/uapi/linux/dvb/frontend.h | 5 ++++- include/uapi/linux/dvb/version.h | 2 +- 7 files changed, 58 insertions(+), 2 deletions(-)
Quoted 4 lines
Quoted 2 lines
Signature · 1 line
2.1.4Acked-by Ralph Metzler <[email protected]>
I'm applying both patches.
Quoted 11 lines
We had some thoughts about having a:
#define
NO_SCRAMBLING_CODE(~0U)But DVB-S2 is always scrambling (with default index 0) and other delivery systems can ignore this property. Or do you think it is needed?
One could add a define for AUTO or
AUTO_S2Xfor the standard 7 indices to be tested in DVB-S2X. But eitherdvb_frontend.cor the demod driver would have to support this in software. I don't think there is a demod which supports this in hardware yet?
I think that, once we have a hardware capable of auto-detecting the gold sequence, then a NO_SCRAMBLING_CODE (or AUTO_GOLD_SEQUENCE) could make sense.
For now, I don't think any demod currently supports it.
Thanks,
Mauro