Skip to contentSkip to conversation

arm: zynq: Adding new Xilinx boards

PATCH In review Michal Simek 2 participants 7 messages Mar 2, 2018 – Mar 7, 2018

Subsystems (3)
Device tree bindings Arm/Zynq architecture Arm and arm64 SoC sub-architectures (common parts)
lore
Share & tools
lore

Michal Simek

author
#0 lore raw

v3 cover arm: zynq: Adding new Xilinx boards

Hi,

this patchset is adding 5 new dts files which target cc108 and zc770 boards.
Please let me know if you see any issue with them.

Series depends on this one patch
https://lkml.org/lkml/2018/2/23/412

Thanks,
Michal

Changes in v3:
- Fix partition for flash

Changes in v2:
- Record compatible string to xilinx.txt
- Record compatible string to xilinx.txt
- Record compatible string to xilinx.txt
- Record compatible string to xilinx.txt
- use eeprom as node name instead of at25
- Record compatible string to xilinx.txt

Michal Simek (5):
arm: zynq: Add Xilinx cc108 board
arm: zynq: Add support for Xilinx zc770 xm010 dc1 board
arm: zynq: Add support for Xilinx zc770 xm011 dc2 board
arm: zynq: Add support for Xilinx zc770 xm012 dc3 board
arm: zynq: Add support for Xilinx zc770 xm013 dc4 board

 Documentation/devicetree/bindings/arm/xilinx.txt | 11 +++
 arch/arm/boot/dts/Makefile                       |  5 ++
 arch/arm/boot/dts/zynq-cc108.dts                 | 75 +++++++++++++++++++
 arch/arm/boot/dts/zynq-zc770-xm010.dts           | 95 ++++++++++++++++++++++++
 arch/arm/boot/dts/zynq-zc770-xm011.dts           | 64 ++++++++++++++++
 arch/arm/boot/dts/zynq-zc770-xm012.dts           | 64 ++++++++++++++++
 arch/arm/boot/dts/zynq-zc770-xm013.dts           | 78 +++++++++++++++++++
 7 files changed, 392 insertions(+)
 create mode 100644 arch/arm/boot/dts/zynq-cc108.dts
 create mode 100644 arch/arm/boot/dts/zynq-zc770-xm010.dts
 create mode 100644 arch/arm/boot/dts/zynq-zc770-xm011.dts
 create mode 100644 arch/arm/boot/dts/zynq-zc770-xm012.dts
 create mode 100644 arch/arm/boot/dts/zynq-zc770-xm013.dts
Signature · 1 line
1.9.1
author
#1 lore raw

PATCH v3 1/5 arm: zynq: Add Xilinx cc108 board

The board contains 7z010 with 512MB memory, ethernet, qspi, uart, usbs and sd. But board is not supporting booting from sd card.

Signed-off-by Michal Simek <[email protected]>
Reviewed-by Rob Herring <[email protected]>

---

Changes in v3: None
Changes in v2:
- Record compatible string to xilinx.txt

 Documentation/devicetree/bindings/arm/xilinx.txt |  5 ++
 arch/arm/boot/dts/Makefile                       |  1 +
 arch/arm/boot/dts/zynq-cc108.dts                 | 75 ++++++++++++++++++++++++
 3 files changed, 81 insertions(+)
 create mode 100644 arch/arm/boot/dts/zynq-cc108.dts
Documentation/devicetree/bindings/arm/xilinx.txt +5 -0
index 549e70a022cb..425c74fcc560 100644
@@ -6,6 +6,11 @@ shall have the following properties.
 Required root node properties:
     - compatible = "xlnx,zynq-7000";
 
+Additional compatible strings:
+
+- Xilinx internal board cc108
+  "xlnx,zynq-cc108"
+
 ---------------------------------------------------------------
 
 Xilinx Zynq UltraScale+ MPSoC Platforms Device Tree Bindings
arch/arm/boot/dts/Makefile +1 -0
index ade7a38543dc..c6810e84d4d7 100644
@@ -1062,6 +1062,7 @@ dtb-$(CONFIG_ARCH_VT8500) += \
 	wm8750-apc8750.dtb \
 	wm8850-w70v2.dtb
 dtb-$(CONFIG_ARCH_ZYNQ) += \
+	zynq-cc108.dtb \
 	zynq-microzed.dtb \
 	zynq-parallella.dtb \
 	zynq-zc702.dtb \
arch/arm/boot/dts/zynq-cc108.dts new file +75 -0

75 lines not on this page · raw message

Signature · 1 line
1.9.1
author
#2 lore raw

PATCH v3 2/5 arm: zynq: Add support for Xilinx zc770 xm010 dc1 board

In reply to Michal Simek

zc770 is based board which is extended by FMC/DC cards for SoC validation. FMCs/DCs are supposed to cover all SoC configurations. FMC/DC contains ethernet port, can, i2c, sd, qspi, spi, uart and usb.

Signed-off-by Michal Simek <[email protected]>

---

Changes in v3:
- Fix partition for flash

Changes in v2:
- Record compatible string to xilinx.txt

 Documentation/devicetree/bindings/arm/xilinx.txt |  3 +
 arch/arm/boot/dts/Makefile                       |  1 +
 arch/arm/boot/dts/zynq-zc770-xm010.dts           | 95 ++++++++++++++++++++++++
 3 files changed, 99 insertions(+)
 create mode 100644 arch/arm/boot/dts/zynq-zc770-xm010.dts
Documentation/devicetree/bindings/arm/xilinx.txt +3 -0
index 425c74fcc560..019e69037d42 100644
@@ -11,6 +11,9 @@ Additional compatible strings:
 - Xilinx internal board cc108
   "xlnx,zynq-cc108"
 
+- Xilinx internal board zc770 with different FMC cards
+  "xlnx,zynq-zc770-xm010"
+
 ---------------------------------------------------------------
 
 Xilinx Zynq UltraScale+ MPSoC Platforms Device Tree Bindings
arch/arm/boot/dts/Makefile +1 -0
index c6810e84d4d7..be9ffae2a1ec 100644
@@ -1067,6 +1067,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \
 	zynq-parallella.dtb \
 	zynq-zc702.dtb \
 	zynq-zc706.dtb \
+	zynq-zc770-xm010.dtb \
 	zynq-zed.dtb \
 	zynq-zybo.dtb
 dtb-$(CONFIG_MACH_ARMADA_370) += \
arch/arm/boot/dts/zynq-zc770-xm010.dts new file +95 -0

95 lines not on this page · raw message

Signature · 1 line
1.9.1
maintainer Reviewed-by on v3 2/5
#3 lore raw

Re: [PATCH v3 2/5] arm: zynq: Add support for Xilinx zc770 xm010 dc1 board

Quoted 10 lines · Michal Simek

zc770 is based board which is extended by FMC/DC cards for SoC validation. FMCs/DCs are supposed to cover all SoC configurations. FMC/DC contains ethernet port, can, i2c, sd, qspi, spi, uart and usb.

Signed-off-by Michal Simek <[email protected]>

---

Changes in v3:
- Fix partition for flash

Quoted 8 lines

Changes in v2:
- Record compatible string to xilinx.txt

 Documentation/devicetree/bindings/arm/xilinx.txt |  3 +
 arch/arm/boot/dts/Makefile                       |  1 +
 arch/arm/boot/dts/zynq-zc770-xm010.dts           | 95 ++++++++++++++++++++++++
 3 files changed, 99 insertions(+)
 create mode 100644 arch/arm/boot/dts/zynq-zc770-xm010.dts
Reviewed-by Rob Herring <[email protected]>
author
#4 lore raw

PATCH v3 3/5 arm: zynq: Add support for Xilinx zc770 xm011 dc2 board

In reply to Michal Simek

zc770 is based board which is extended by FMC/DC cards for SoC validation. FMCs/DCs are supposed to cover all SoC configurations. FMC/DC contains can, i2c, nand uart, spi and usb.

Signed-off-by Michal Simek <[email protected]>
Reviewed-by Rob Herring <[email protected]>

---

Changes in v3: None
Changes in v2:
- Record compatible string to xilinx.txt

 Documentation/devicetree/bindings/arm/xilinx.txt |  1 +
 arch/arm/boot/dts/Makefile                       |  1 +
 arch/arm/boot/dts/zynq-zc770-xm011.dts           | 64 ++++++++++++++++++++++++
 3 files changed, 66 insertions(+)
 create mode 100644 arch/arm/boot/dts/zynq-zc770-xm011.dts
Documentation/devicetree/bindings/arm/xilinx.txt +1 -0
index 019e69037d42..80139a7cfcdc 100644
@@ -13,6 +13,7 @@ Additional compatible strings:
 
 - Xilinx internal board zc770 with different FMC cards
   "xlnx,zynq-zc770-xm010"
+  "xlnx,zynq-zc770-xm011"
 
 ---------------------------------------------------------------
arch/arm/boot/dts/Makefile +1 -0
index be9ffae2a1ec..801a46a88e93 100644
@@ -1068,6 +1068,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \
 	zynq-zc702.dtb \
 	zynq-zc706.dtb \
 	zynq-zc770-xm010.dtb \
+	zynq-zc770-xm011.dtb \
 	zynq-zed.dtb \
 	zynq-zybo.dtb
 dtb-$(CONFIG_MACH_ARMADA_370) += \
arch/arm/boot/dts/zynq-zc770-xm011.dts new file +64 -0

64 lines not on this page · raw message

Signature · 1 line
1.9.1
author
#5 lore raw

PATCH v3 4/5 arm: zynq: Add support for Xilinx zc770 xm012 dc3 board

In reply to Michal Simek

zc770 is based board which is extended by FMC/DC cards for SoC validation. FMCs/DCs are supposed to cover all SoC configurations. FMC/DC contains can, 2x i2c, nor flash, spi and uart.

Signed-off-by Michal Simek <[email protected]>
Reviewed-by Rob Herring <[email protected]>

---

Changes in v3: None
Changes in v2:
- Record compatible string to xilinx.txt

 Documentation/devicetree/bindings/arm/xilinx.txt |  1 +
 arch/arm/boot/dts/Makefile                       |  1 +
 arch/arm/boot/dts/zynq-zc770-xm012.dts           | 64 ++++++++++++++++++++++++
 3 files changed, 66 insertions(+)
 create mode 100644 arch/arm/boot/dts/zynq-zc770-xm012.dts
Documentation/devicetree/bindings/arm/xilinx.txt +1 -0
index 80139a7cfcdc..745c898f2f7f 100644
@@ -14,6 +14,7 @@ Additional compatible strings:
 - Xilinx internal board zc770 with different FMC cards
   "xlnx,zynq-zc770-xm010"
   "xlnx,zynq-zc770-xm011"
+  "xlnx,zynq-zc770-xm012"
 
 ---------------------------------------------------------------
arch/arm/boot/dts/Makefile +1 -0
index 801a46a88e93..2c74b935ad1c 100644
@@ -1069,6 +1069,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \
 	zynq-zc706.dtb \
 	zynq-zc770-xm010.dtb \
 	zynq-zc770-xm011.dtb \
+	zynq-zc770-xm012.dtb \
 	zynq-zed.dtb \
 	zynq-zybo.dtb
 dtb-$(CONFIG_MACH_ARMADA_370) += \
arch/arm/boot/dts/zynq-zc770-xm012.dts new file +64 -0

64 lines not on this page · raw message

Signature · 1 line
1.9.1
author
#6 lore raw

PATCH v3 5/5 arm: zynq: Add support for Xilinx zc770 xm013 dc4 board

In reply to Michal Simek

zc770 is based board which is extended by FMC/DC cards for SoC validation. FMCs/DCs are supposed to cover all SoC configurations. FMC/DC contains can, ethernet, i2c, qspi, spi and uart.

Signed-off-by Michal Simek <[email protected]>
Reviewed-by Rob Herring <[email protected]>

---

Changes in v3: None
Changes in v2:
- use eeprom as node name instead of at25
- Record compatible string to xilinx.txt

 Documentation/devicetree/bindings/arm/xilinx.txt |  1 +
 arch/arm/boot/dts/Makefile                       |  1 +
 arch/arm/boot/dts/zynq-zc770-xm013.dts           | 78 ++++++++++++++++++++++++
 3 files changed, 80 insertions(+)
 create mode 100644 arch/arm/boot/dts/zynq-zc770-xm013.dts
Documentation/devicetree/bindings/arm/xilinx.txt +1 -0
index 745c898f2f7f..63705a451251 100644
@@ -15,6 +15,7 @@ Additional compatible strings:
   "xlnx,zynq-zc770-xm010"
   "xlnx,zynq-zc770-xm011"
   "xlnx,zynq-zc770-xm012"
+  "xlnx,zynq-zc770-xm013"
 
 ---------------------------------------------------------------
arch/arm/boot/dts/Makefile +1 -0
index 2c74b935ad1c..d5de3748a80a 100644
@@ -1070,6 +1070,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \
 	zynq-zc770-xm010.dtb \
 	zynq-zc770-xm011.dtb \
 	zynq-zc770-xm012.dtb \
+	zynq-zc770-xm013.dtb \
 	zynq-zed.dtb \
 	zynq-zybo.dtb
 dtb-$(CONFIG_MACH_ARMADA_370) += \
arch/arm/boot/dts/zynq-zc770-xm013.dts new file +78 -0

78 lines not on this page · raw message

Signature · 1 line
1.9.1