mlxsw: Add resource scale tests

index d1f14f83979e..59272824ef37 100644
@@ -14,8 +14,13 @@ PAUSE_ON_CLEANUP=${PAUSE_ON_CLEANUP:=no}
 NETIF_TYPE=${NETIF_TYPE:=veth}
 NETIF_CREATE=${NETIF_CREATE:=yes}
 
-if [[ -f forwarding.config ]]; then
-	source forwarding.config
+relative_path="${BASH_SOURCE%/*}"
+if [[ "$relative_path" == "${BASH_SOURCE}" ]]; then
+	relative_path="."
+fi
+
+if [[ -f $relative_path/forwarding.config ]]; then
+	source "$relative_path/forwarding.config"
 fi
 
 ##############################################################################

index 59272824ef37..5f4b7ed2c65a 100644
@@ -156,6 +156,19 @@ check_fail()
 	fi
 }
 
+check_err_fail()
+{
+	local should_fail=$1; shift
+	local err=$1; shift
+	local what=$1; shift
+
+	if ((should_fail)); then
+		check_fail $err "$what succeeded, but should have failed"
+	else
+		check_err $err "$what failed"
+	fi
+}
+
 log_test()
 {
 	local test_name=$1

index 5f4b7ed2c65a..e073918bbe15 100644
@@ -220,7 +220,9 @@ setup_wait_dev()
 
 setup_wait()
 {
-	for i in $(eval echo {1..$NUM_NETIFS}); do
+	local num_netifs=${1:-$NUM_NETIFS}
+
+	for ((i = 1; i <= num_netifs; ++i)); do
 		setup_wait_dev ${NETIFS[p$i]}
 	done
 

@@ -481,7 +483,9 @@ forwarding_restore()
 
 tc_offload_check()
 {
-	for i in $(eval echo {1..$NUM_NETIFS}); do
+	local num_netifs=${1:-$NUM_NETIFS}
+
+	for ((i = 1; i <= num_netifs; ++i)); do
 		ethtool -k ${NETIFS[p$i]} \
 			| grep "hw-tc-offload: on" &> /dev/null
 		if [[ $? -ne 0 ]]; then

new file mode 100644
index 000000000000..5ab1e5f43022
@@ -0,0 +1,108 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+##############################################################################
+# Source library
+
+relative_path="${BASH_SOURCE%/*}"
+if [[ "$relative_path" == "${BASH_SOURCE}" ]]; then
+	relative_path="."
+fi
+
+source "$relative_path/lib.sh"
+
+##############################################################################
+# Defines
+
+DEVLINK_DEV=$(devlink port show | grep "${NETIFS[p1]}" | \
+	      grep -v "${NETIFS[p1]}[0-9]" | cut -d" " -f1 | \
+	      rev | cut -d"/" -f2- | rev)
+if [ -z "$DEVLINK_DEV" ]; then
+	echo "SKIP: ${NETIFS[p1]} has no devlink device registered for it"
+	exit 1
+fi
+if [[ "$(echo $DEVLINK_DEV | grep -c pci)" -eq 0 ]]; then
+	echo "SKIP: devlink device's bus is not PCI"
+	exit 1
+fi
+
+DEVLINK_VIDDID=$(lspci -s $(echo $DEVLINK_DEV | cut -d"/" -f2) \
+		 -n | cut -d" " -f3)
+
+##############################################################################
+# Sanity checks
+
+devlink -j resource show "$DEVLINK_DEV" &> /dev/null
+if [ $? -ne 0 ]; then
+	echo "SKIP: iproute2 too old, missing devlink resource support"
+	exit 1
+fi
+
+##############################################################################
+# Devlink helpers
+
+devlink_resource_names_to_path()
+{
+	local resource
+	local path=""
+
+	for resource in "${@}"; do
+		if [ "$path" == "" ]; then
+			path="$resource"
+		else
+			path="${path}/$resource"
+		fi
+	done
+
+	echo "$path"
+}
+
+devlink_resource_get()
+{
+	local name=$1
+	local resource_name=.[][\"$DEVLINK_DEV\"]
+
+	resource_name="$resource_name | .[] | select (.name == \"$name\")"
+
+	shift
+	for resource in "${@}"; do
+		resource_name="${resource_name} | .[\"resources\"][] | \
+			       select (.name == \"$resource\")"
+	done
+
+	devlink -j resource show "$DEVLINK_DEV" | jq "$resource_name"
+}
+
+devlink_resource_size_get()
+{
+	local size=$(devlink_resource_get "$@" | jq '.["size_new"]')
+
+	if [ "$size" == "null" ]; then
+		devlink_resource_get "$@" | jq '.["size"]'
+	else
+		echo "$size"
+	fi
+}
+
+devlink_resource_size_set()
+{
+	local new_size=$1
+	local path
+
+	shift
+	path=$(devlink_resource_names_to_path "$@")
+	devlink resource set "$DEVLINK_DEV" path "$path" size "$new_size"
+	check_err $? "Failed setting path $path to size $size"
+}
+
+devlink_reload()
+{
+	local still_pending
+
+	devlink dev reload "$DEVLINK_DEV" &> /dev/null
+	check_err $? "Failed reload"
+
+	still_pending=$(devlink resource show "$DEVLINK_DEV" | \
+			grep -c "size_new")
+	check_err $still_pending "Failed reload - There are still unset sizes"
+}

index f3e766e504d8..f3dd6c4f61e1 100644
@@ -9154,6 +9154,7 @@ S:	Supported
 W:	http://www.mellanox.com
 Q:	http://patchwork.ozlabs.org/project/netdev/list/
 F:	drivers/net/ethernet/mellanox/mlxsw/
+F:	tools/testing/selftests/drivers/net/mlxsw/
 
 MELLANOX FIRMWARE FLASH LIBRARY (mlxfw)
 M:	mlxsw at mellanox.com

119 lines not on this page · raw message

new file mode 100755
index 000000000000..b1fe960e398a
@@ -0,0 +1,117 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+NUM_NETIFS=1
+source devlink_lib_spectrum.sh
+
+setup_prepare()
+{
+	devlink_sp_read_kvd_defaults
+}
+
+cleanup()
+{
+	pre_cleanup
+	devlink_sp_size_kvd_to_default
+}
+
+trap cleanup EXIT
+
+setup_prepare
+
+profiles_test()
+{
+	local i
+
+	log_info "Running profile tests"
+
+	for i in $KVD_PROFILES; do
+		RET=0
+		devlink_sp_resource_kvd_profile_set $i
+		log_test "'$i' profile"
+	done
+
+	# Default is explicitly tested at end to ensure it's actually applied
+	RET=0
+	devlink_sp_resource_kvd_profile_set "default"
+	log_test "'default' profile"
+}
+
+resources_min_test()
+{
+	local size
+	local i
+	local j
+
+	log_info "Running KVD-minimum tests"
+
+	for i in $KVD_CHILDREN; do
+		RET=0
+		size=$(devlink_resource_get kvd "$i" | jq '.["size_min"]')
+		devlink_resource_size_set "$size" kvd "$i"
+
+		# In case of linear, need to minimize sub-resources as well
+		if [[ "$i" == "linear" ]]; then
+			for j in $KVDL_CHILDREN; do
+				devlink_resource_size_set 0 kvd linear "$j"
+			done
+		fi
+
+		devlink_reload
+		devlink_sp_size_kvd_to_default
+		log_test "'$i' minimize [$size]"
+	done
+}
+
+resources_max_test()
+{
+	local min_size
+	local size
+	local i
+	local j
+
+	log_info "Running KVD-maximum tests"
+	for i in $KVD_CHILDREN; do
+		RET=0
+		devlink_sp_resource_minimize
+
+		# Calculate the maximum possible size for the given partition
+		size=$(devlink_resource_size_get kvd)
+		for j in $KVD_CHILDREN; do
+			if [ "$i" != "$j" ]; then
+				min_size=$(devlink_resource_get kvd "$j" | \
+					   jq '.["size_min"]')
+				size=$((size - min_size))
+			fi
+		done
+
+		# Test almost maximum size
+		devlink_resource_size_set "$((size - 128))" kvd "$i"
+		devlink_reload
+		log_test "'$i' almost maximize [$((size - 128))]"
+
+		# Test above maximum size
+		devlink resource set "$DEVLINK_DEV" \
+			path "kvd/$i" size $((size + 128)) &> /dev/null
+		check_fail $? "Set kvd/$i to size $((size + 128)) should fail"
+		log_test "'$i' Overflow rejection [$((size + 128))]"
+
+		# Test maximum size
+		if [ "$i" == "hash_single" ] || [ "$i" == "hash_double" ]; then
+			echo "SKIP: Observed problem with exact max $i"
+			continue
+		fi
+
+		devlink_resource_size_set "$size" kvd "$i"
+		devlink_reload
+		log_test "'$i' maximize [$size]"
+
+		devlink_sp_size_kvd_to_default
+	done
+}
+
+profiles_test
+resources_min_test
+resources_max_test
+
+exit "$RET"

new file mode 100644
index 000000000000..d231649b4f01
@@ -0,0 +1,167 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ROUTER_NUM_NETIFS=4
+
+router_h1_create()
+{
+	simple_if_init $h1 192.0.1.1/24
+	ip route add 193.0.0.0/8 via 192.0.1.2 dev $h1
+}
+
+router_h1_destroy()
+{
+	ip route del 193.0.0.0/8 via 192.0.1.2 dev $h1
+	simple_if_fini $h1 192.0.1.1/24
+}
+
+router_h2_create()
+{
+	simple_if_init $h2 192.0.2.1/24
+	tc qdisc add dev $h2 handle ffff: ingress
+}
+
+router_h2_destroy()
+{
+	tc qdisc del dev $h2 handle ffff: ingress
+	simple_if_fini $h2 192.0.2.1/24
+}
+
+router_create()
+{
+	ip link set dev $rp1 up
+	ip link set dev $rp2 up
+
+	ip address add 192.0.1.2/24 dev $rp1
+	ip address add 192.0.2.2/24 dev $rp2
+}
+
+router_destroy()
+{
+	ip address del 192.0.2.2/24 dev $rp2
+	ip address del 192.0.1.2/24 dev $rp1
+
+	ip link set dev $rp2 down
+	ip link set dev $rp1 down
+}
+
+router_setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	rp1=${NETIFS[p2]}
+
+	rp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	h1mac=$(mac_get $h1)
+	rp1mac=$(mac_get $rp1)
+
+	vrf_prepare
+
+	router_h1_create
+	router_h2_create
+
+	router_create
+}
+
+router_offload_validate()
+{
+	local route_count=$1
+	local offloaded_count
+
+	offloaded_count=$(ip route | grep -o 'offload' | wc -l)
+	[[ $offloaded_count -ge $route_count ]]
+}
+
+router_routes_create()
+{
+	local route_count=$1
+	local count=0
+
+	ROUTE_FILE="$(mktemp)"
+
+	for i in {0..255}
+	do
+		for j in {0..255}
+		do
+			for k in {0..255}
+			do
+				if [[ $count -eq $route_count ]]; then
+					break 3
+				fi
+
+				echo route add 193.${i}.${j}.${k}/32 via \
+				       192.0.2.1 dev $rp2  >> $ROUTE_FILE
+				((count++))
+			done
+		done
+	done
+
+	ip -b $ROUTE_FILE &> /dev/null
+}
+
+router_routes_destroy()
+{
+	if [[ -v ROUTE_FILE ]]; then
+		rm -f $ROUTE_FILE
+	fi
+}
+
+router_test()
+{
+	local route_count=$1
+	local should_fail=$2
+	local count=0
+
+	RET=0
+
+	router_routes_create $route_count
+
+	router_offload_validate $route_count
+	check_err_fail $should_fail $? "Offload of $route_count routes"
+	if [[ $RET -ne 0 ]] || [[ $should_fail -eq 1 ]]; then
+		return
+	fi
+
+	tc filter add dev $h2 ingress protocol ip pref 1 flower \
+		skip_sw dst_ip 193.0.0.0/8 action drop
+
+	for i in {0..255}
+	do
+		for j in {0..255}
+		do
+			for k in {0..255}
+			do
+				if [[ $count -eq $route_count ]]; then
+					break 3
+				fi
+
+				$MZ $h1 -c 1 -p 64 -a $h1mac -b $rp1mac \
+					-A 192.0.1.1 -B 193.${i}.${j}.${k} \
+					-t ip -q
+				((count++))
+			done
+		done
+	done
+
+	tc_check_packets "dev $h2 ingress" 1 $route_count
+	check_err $? "Offload mismatch"
+
+	tc filter del dev $h2 ingress protocol ip pref 1 flower \
+		skip_sw dst_ip 193.0.0.0/8 action drop
+
+	router_routes_destroy
+}
+
+router_cleanup()
+{
+	pre_cleanup
+
+	router_routes_destroy
+	router_destroy
+
+	router_h2_destroy
+	router_h1_destroy
+
+	vrf_cleanup
+}

new file mode 100644
index 000000000000..21c4697d5bab
@@ -0,0 +1,18 @@
+# SPDX-License-Identifier: GPL-2.0
+source ../router_scale.sh
+
+router_get_target()
+{
+	local should_fail=$1
+	local target
+
+	target=$(devlink_resource_size_get kvd hash_single)
+
+	if [[ $should_fail -eq 0 ]]; then
+		target=$((target * 85 / 100))
+	else
+		target=$((target + 1))
+	fi
+
+	echo $target
+}

new file mode 100644
index 000000000000..a6d733d2a4b4
@@ -0,0 +1,134 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test for resource limit of offloaded flower rules. The test adds a given
+# number of flower matches for different IPv6 addresses, then generates traffic,
+# and ensures each was hit exactly once. This file contains functions to set up
+# a testing topology and run the test, and is meant to be sourced from a test
+# script that calls the testing routine with a given number of rules.
+
+TC_FLOWER_NUM_NETIFS=2
+
+tc_flower_h1_create()
+{
+	simple_if_init $h1
+	tc qdisc add dev $h1 clsact
+}
+
+tc_flower_h1_destroy()
+{
+	tc qdisc del dev $h1 clsact
+	simple_if_fini $h1
+}
+
+tc_flower_h2_create()
+{
+	simple_if_init $h2
+	tc qdisc add dev $h2 clsact
+}
+
+tc_flower_h2_destroy()
+{
+	tc qdisc del dev $h2 clsact
+	simple_if_fini $h2
+}
+
+tc_flower_setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	h2=${NETIFS[p2]}
+
+	vrf_prepare
+
+	tc_flower_h1_create
+	tc_flower_h2_create
+}
+
+tc_flower_cleanup()
+{
+	pre_cleanup
+
+	tc_flower_h2_destroy
+	tc_flower_h1_destroy
+
+	vrf_cleanup
+
+	if [[ -v TC_FLOWER_BATCH_FILE ]]; then
+		rm -f $TC_FLOWER_BATCH_FILE
+	fi
+}
+
+tc_flower_addr()
+{
+	local num=$1; shift
+
+	printf "2001:db8:1::%x" $num
+}
+
+tc_flower_rules_create()
+{
+	local count=$1; shift
+	local should_fail=$1; shift
+
+	TC_FLOWER_BATCH_FILE="$(mktemp)"
+
+	for ((i = 0; i < count; ++i)); do
+		cat >> $TC_FLOWER_BATCH_FILE <<-EOF
+			filter add dev $h2 ingress \
+				prot ipv6 \
+				pref 1000 \
+				flower $tcflags dst_ip $(tc_flower_addr $i) \
+				action drop
+		EOF
+	done
+
+	tc -b $TC_FLOWER_BATCH_FILE
+	check_err_fail $should_fail $? "Rule insertion"
+}
+
+__tc_flower_test()
+{
+	local count=$1; shift
+	local should_fail=$1; shift
+	local last=$((count - 1))
+
+	tc_flower_rules_create $count $should_fail
+
+	for ((i = 0; i < count; ++i)); do
+		$MZ $h1 -q -c 1 -t ip -p 20 -b bc -6 \
+			-A 2001:db8:2::1 \
+			-B $(tc_flower_addr $i)
+	done
+
+	MISMATCHES=$(
+		tc -j -s filter show dev $h2 ingress |
+		jq -r '[ .[] | select(.kind == "flower") | .options |
+		         values as $rule | .actions[].stats.packets |
+		         select(. != 1) | "\(.) on \($rule.keys.dst_ip)" ] |
+		       join(", ")'
+	)
+
+	test -z "$MISMATCHES"
+	check_err $? "Expected to capture 1 packet for each IP, but got $MISMATCHES"
+}
+
+tc_flower_test()
+{
+	local count=$1; shift
+	local should_fail=$1; shift
+
+	# We use lower 16 bits of IPv6 address for match. Also there are only 16
+	# bits of rule priority space.
+	if ((count > 65536)); then
+		check_err 1 "Invalid count of $count. At most 65536 rules supported"
+		return
+	fi
+
+	if ! tc_offload_check $TC_FLOWER_NUM_NETIFS; then
+		check_err 1 "Could not test offloaded functionality"
+		return
+	fi
+
+	tcflags="skip_sw"
+	__tc_flower_test $count $should_fail
+}

new file mode 100644
index 000000000000..f9bfd8937765
@@ -0,0 +1,19 @@
+# SPDX-License-Identifier: GPL-2.0
+source ../tc_flower_scale.sh
+
+tc_flower_get_target()
+{
+	local should_fail=$1; shift
+
+	# 6144 (6x1024) is the theoretical maximum.
+	# One bank of 512 rules is taken by the 18-byte MC router rule.
+	# One rule is the ACL catch-all.
+	# 6144 - 512 - 1 = 5631
+	local target=5631
+
+	if ((! should_fail)); then
+		echo $target
+	else
+		echo $((target + 1))
+	fi
+}

new file mode 100644
index 000000000000..6f3a70df63bc
@@ -0,0 +1,197 @@
+# SPDX-License-Identifier: GPL-2.0
+
+# Test offloading a number of mirrors-to-gretap. The test creates a number of
+# tunnels. Then it adds one flower mirror for each of the tunnels, matching a
+# given host IP. Then it generates traffic at each of the host IPs and checks
+# that the traffic has been mirrored at the appropriate tunnel.
+#
+#   +--------------------------+                   +--------------------------+
+#   | H1                       |                   |                       H2 |
+#   |     + $h1                |                   |                $h2 +     |
+#   |     | 2001:db8:1:X::1/64 |                   | 2001:db8:1:X::2/64 |     |
+#   +-----|--------------------+                   +--------------------|-----+
+#         |                                                             |
+#   +-----|-------------------------------------------------------------|-----+
+#   | SW  o--> mirrors                                                  |     |
+#   | +---|-------------------------------------------------------------|---+ |
+#   | |   + $swp1                    BR                           $swp2 +   | |
+#   | +---------------------------------------------------------------------+ |
+#   |                                                                         |
+#   |     + $swp3                          + gt6-<X> (ip6gretap)              |
+#   |     | 2001:db8:2:X::1/64             : loc=2001:db8:2:X::1              |
+#   |     |                                : rem=2001:db8:2:X::2              |
+#   |     |                                : ttl=100                          |
+#   |     |                                : tos=inherit                      |
+#   |     |                                :                                  |
+#   +-----|--------------------------------:----------------------------------+
+#         |                                :
+#   +-----|--------------------------------:----------------------------------+
+#   | H3  + $h3                            + h3-gt6-<X> (ip6gretap)           |
+#   |       2001:db8:2:X::2/64               loc=2001:db8:2:X::2              |
+#   |                                        rem=2001:db8:2:X::1              |
+#   |                                        ttl=100                          |
+#   |                                        tos=inherit                      |
+#   |                                                                         |
+#   +-------------------------------------------------------------------------+
+
+source ../../../../net/forwarding/mirror_lib.sh
+
+MIRROR_NUM_NETIFS=6
+
+mirror_gre_ipv6_addr()
+{
+	local net=$1; shift
+	local num=$1; shift
+
+	printf "2001:db8:%x:%x" $net $num
+}
+
+mirror_gre_tunnels_create()
+{
+	local count=$1; shift
+	local should_fail=$1; shift
+
+	MIRROR_GRE_BATCH_FILE="$(mktemp)"
+	for ((i=0; i < count; ++i)); do
+		local match_dip=$(mirror_gre_ipv6_addr 1 $i)::2
+		local htun=h3-gt6-$i
+		local tun=gt6-$i
+
+		((mirror_gre_tunnels++))
+
+		ip address add dev $h1 $(mirror_gre_ipv6_addr 1 $i)::1/64
+		ip address add dev $h2 $(mirror_gre_ipv6_addr 1 $i)::2/64
+
+		ip address add dev $swp3 $(mirror_gre_ipv6_addr 2 $i)::1/64
+		ip address add dev $h3 $(mirror_gre_ipv6_addr 2 $i)::2/64
+
+		tunnel_create $tun ip6gretap \
+			      $(mirror_gre_ipv6_addr 2 $i)::1 \
+			      $(mirror_gre_ipv6_addr 2 $i)::2 \
+			      ttl 100 tos inherit allow-localremote
+
+		tunnel_create $htun ip6gretap \
+			      $(mirror_gre_ipv6_addr 2 $i)::2 \
+			      $(mirror_gre_ipv6_addr 2 $i)::1
+		ip link set $htun vrf v$h3
+		matchall_sink_create $htun
+
+		cat >> $MIRROR_GRE_BATCH_FILE <<-EOF
+			filter add dev $swp1 ingress pref 1000 \
+				protocol ipv6 \
+				flower $tcflags dst_ip $match_dip \
+				action mirred egress mirror dev $tun
+		EOF
+	done
+
+	tc -b $MIRROR_GRE_BATCH_FILE
+	check_err_fail $should_fail $? "Mirror rule insertion"
+}
+
+mirror_gre_tunnels_destroy()
+{
+	local count=$1; shift
+
+	for ((i=0; i < count; ++i)); do
+		local htun=h3-gt6-$i
+		local tun=gt6-$i
+
+		ip address del dev $h3 $(mirror_gre_ipv6_addr 2 $i)::2/64
+		ip address del dev $swp3 $(mirror_gre_ipv6_addr 2 $i)::1/64
+
+		ip address del dev $h2 $(mirror_gre_ipv6_addr 1 $i)::2/64
+		ip address del dev $h1 $(mirror_gre_ipv6_addr 1 $i)::1/64
+
+		tunnel_destroy $htun
+		tunnel_destroy $tun
+	done
+}
+
+__mirror_gre_test()
+{
+	local count=$1; shift
+	local should_fail=$1; shift
+
+	mirror_gre_tunnels_create $count $should_fail
+	if ((should_fail)); then
+	    return
+	fi
+
+	sleep 5
+
+	for ((i = 0; i < count; ++i)); do
+		local dip=$(mirror_gre_ipv6_addr 1 $i)::2
+		local htun=h3-gt6-$i
+		local message
+
+		icmp6_capture_install $htun
+		mirror_test v$h1 "" $dip $htun 100 10
+		icmp6_capture_uninstall $htun
+	done
+}
+
+mirror_gre_test()
+{
+	local count=$1; shift
+	local should_fail=$1; shift
+
+	if ! tc_offload_check $TC_FLOWER_NUM_NETIFS; then
+		check_err 1 "Could not test offloaded functionality"
+		return
+	fi
+
+	tcflags="skip_sw"
+	__mirror_gre_test $count $should_fail
+}
+
+mirror_gre_setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	swp3=${NETIFS[p5]}
+	h3=${NETIFS[p6]}
+
+	mirror_gre_tunnels=0
+
+	vrf_prepare
+
+	simple_if_init $h1
+	simple_if_init $h2
+	simple_if_init $h3
+
+	ip link add name br1 type bridge vlan_filtering 1
+	ip link set dev br1 up
+
+	ip link set dev $swp1 master br1
+	ip link set dev $swp1 up
+	tc qdisc add dev $swp1 clsact
+
+	ip link set dev $swp2 master br1
+	ip link set dev $swp2 up
+
+	ip link set dev $swp3 up
+}
+
+mirror_gre_cleanup()
+{
+	mirror_gre_tunnels_destroy $mirror_gre_tunnels
+
+	ip link set dev $swp3 down
+
+	ip link set dev $swp2 down
+
+	tc qdisc del dev $swp1 clsact
+	ip link set dev $swp1 down
+
+	ip link del dev br1
+
+	simple_if_fini $h3
+	simple_if_fini $h2
+	simple_if_fini $h1
+
+	vrf_cleanup
+}

new file mode 100644
index 000000000000..8d2186c7c62b
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0
+source ../mirror_gre_scale.sh
+
+mirror_gre_get_target()
+{
+	local should_fail=$1; shift
+
+	if ((! should_fail)); then
+		echo 3
+	else
+		echo 4
+	fi
+}

new file mode 100755
index 000000000000..a0a80e1a69e8
@@ -0,0 +1,55 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+NUM_NETIFS=6
+source ../../../../net/forwarding/lib.sh
+source ../../../../net/forwarding/tc_common.sh
+source devlink_lib_spectrum.sh
+
+current_test=""
+
+cleanup()
+{
+	pre_cleanup
+	if [ ! -z $current_test ]; then
+		${current_test}_cleanup
+	fi
+	devlink_sp_size_kvd_to_default
+}
+
+devlink_sp_read_kvd_defaults
+trap cleanup EXIT
+
+ALL_TESTS="router tc_flower mirror_gre"
+for current_test in ${TESTS:-$ALL_TESTS}; do
+	source ${current_test}_scale.sh
+
+	num_netifs_var=${current_test^^}_NUM_NETIFS
+	num_netifs=${!num_netifs_var:-$NUM_NETIFS}
+
+	for profile in $KVD_PROFILES; do
+		RET=0
+		devlink_sp_resource_kvd_profile_set $profile
+		if [[ $RET -gt 0 ]]; then
+			log_test "'$current_test' [$profile] setting"
+			continue
+		fi
+
+		for should_fail in 0 1; do
+			RET=0
+			target=$(${current_test}_get_target "$should_fail")
+			${current_test}_setup_prepare
+			setup_wait $num_netifs
+			${current_test}_test "$target" "$should_fail"
+			${current_test}_cleanup
+			if [[ "$should_fail" -eq 0 ]]; then
+				log_test "'$current_test' [$profile] $target"
+			else
+				log_test "'$current_test' [$profile] overflow $target"
+			fi
+		done
+	done
+done
+current_test=""
+
+exit "$RET"