Skip to contentSkip to conversation

udp: add missing check on edumx rx path

PATCH In review Paolo Abeni 2 participants 4 messages Sep 13, 2018 – Sep 17, 2018

Subsystems (3)
lore
Share & tools
lore

Paolo Abeni

author maintainer
#0 lore raw

cover udp: add missing check on edumx rx path

The early demux RX path for the UDP protocol is currently missing some checks. Both ipv4 and ipv6 implementations lack checksum conversion and the ipv6 implementation additionally lack the zero checksum validation.

The first patch takes care of UDPv4 and the second one of UDPv6

Paolo Abeni (2):
udp4: fix IP_CMSG_CHECKSUM for connected sockets
udp6: add missing checks on edumux packet processing

 net/ipv4/udp.c | 49 +++++++++++++++++++------------------
 net/ipv6/udp.c | 65 ++++++++++++++++++++++++++++----------------------
 2 files changed, 63 insertions(+), 51 deletions(-)
Signature · 1 line
2.17.1
author maintainer
#1 lore raw

PATCH 1/2 udp4: fix IP_CMSG_CHECKSUM for connected sockets

commit 2abb7cdc0dc8 ("udp: Add support for doing checksum unnecessary conversion") left out the early demux path for connected sockets. As a result IP_CMSG_CHECKSUM gives wrong values for such socket when GRO is not enabled/available.

This change addresses the issue by moving the csum conversion to a common helper and using such helper in both the default and the early demux rx path.

Fixes 2abb7cdc0dc8 ("udp: Add support for doing checksum unnecessary conversion")
---
 net/ipv4/udp.c | 49 ++++++++++++++++++++++++++-----------------------
 1 file changed, 26 insertions(+), 23 deletions(-)
net/ipv4/udp.c +26 -23
index f4e35b2ff8b8..7d69dd6fa7e8 100644
@@ -2124,6 +2124,28 @@ static inline int udp4_csum_init(struct sk_buff *skb, struct udphdr *uh,
 							 inet_compute_pseudo);
 }
 
+/* wrapper for udp_queue_rcv_skb tacking care of csum conversion and
+ * return code conversion for ip layer consumption
+ */
+static int udp_unicast_rcv_skb(struct sock *sk, struct sk_buff *skb,
+			       struct udphdr *uh)
+{
+	int ret;
+
+	if (inet_get_convert_csum(sk) && uh->check && !IS_UDPLITE(sk))
+		skb_checksum_try_convert(skb, IPPROTO_UDP, uh->check,
+					 inet_compute_pseudo);
+
+	ret = udp_queue_rcv_skb(sk, skb);
+
+	/* a return value > 0 means to resubmit the input, but
+	 * it wants the return to be -protocol, or 0
+	 */
+	if (ret > 0)
+		return -ret;
+	return 0;
+}
+
 /*
  *	All we need to do is get the socket, and then do a checksum.
  */
@@ -2170,14 +2192,9 @@ int __udp4_lib_rcv(struct sk_buff *skb, struct udp_table *udptable,
 		if (unlikely(sk->sk_rx_dst != dst))
 			udp_sk_rx_dst_set(sk, dst);
 
-		ret = udp_queue_rcv_skb(sk, skb);
+		ret = udp_unicast_rcv_skb(sk, skb, uh);
 		sock_put(sk);
-		/* a return value > 0 means to resubmit the input, but
-		 * it wants the return to be -protocol, or 0
-		 */
-		if (ret > 0)
-			return -ret;
-		return 0;
+		return ret;
 	}
 
 	if (rt->rt_flags & (RTCF_BROADCAST|RTCF_MULTICAST))
@@ -2185,22 +2202,8 @@ int __udp4_lib_rcv(struct sk_buff *skb, struct udp_table *udptable,
 						saddr, daddr, udptable, proto);
 
 	sk = __udp4_lib_lookup_skb(skb, uh->source, uh->dest, udptable);
-	if (sk) {
-		int ret;
-
-		if (inet_get_convert_csum(sk) && uh->check && !IS_UDPLITE(sk))
-			skb_checksum_try_convert(skb, IPPROTO_UDP, uh->check,
-						 inet_compute_pseudo);
-
-		ret = udp_queue_rcv_skb(sk, skb);
-
-		/* a return value > 0 means to resubmit the input, but
-		 * it wants the return to be -protocol, or 0
-		 */
-		if (ret > 0)
-			return -ret;
-		return 0;
-	}
+	if (sk)
+		return udp_unicast_rcv_skb(sk, skb, uh);
 
 	if (!xfrm4_policy_check(NULL, XFRM_POLICY_IN, skb))
 		goto drop;
Signature · 1 line
2.17.1
author maintainer
#2 lore raw

PATCH 2/2 udp6: add missing checks on edumux packet processing

In reply to Paolo Abeni

Currently the UDPv6 early demux rx code path lacks some mandatory checks, already implemented into the normal RX code path - namely the checksum conversion and no_check6_rx check.

Similar to the previous commit, we move the common processing to an UDPv6 specific helper and call it from both edemux code path and normal code path. In respect to the UDPv4, we need to add an explicit check for non zero csum according to no_check6_rx value.

Fixes c9f2c1ae123a ("udp6: fix socket leak on early demux")
Fixes 2abb7cdc0dc8 ("udp: Add support for doing checksum unnecessary conversion")
---
 net/ipv6/udp.c | 65 ++++++++++++++++++++++++++++----------------------
 1 file changed, 37 insertions(+), 28 deletions(-)
net/ipv6/udp.c +37 -28
index 83f4c77c79d8..28c4aa5078fc 100644
@@ -752,6 +752,28 @@ static void udp6_sk_rx_dst_set(struct sock *sk, struct dst_entry *dst)
 	}
 }
 
+/* wrapper for udp_queue_rcv_skb tacking care of csum conversion and
+ * return code conversion for ip layer consumption
+ */
+static int udp6_unicast_rcv_skb(struct sock *sk, struct sk_buff *skb,
+				struct udphdr *uh)
+{
+	int ret;
+
+	if (inet_get_convert_csum(sk) && uh->check && !IS_UDPLITE(sk))
+		skb_checksum_try_convert(skb, IPPROTO_UDP, uh->check,
+					 ip6_compute_pseudo);
+
+	ret = udpv6_queue_rcv_skb(sk, skb);
+
+	/* a return value > 0 means to resubmit the input, but
+	 * it wants the return to be -protocol, or 0
+	 */
+	if (ret > 0)
+		return -ret;
+	return 0;
+}
+
 int __udp6_lib_rcv(struct sk_buff *skb, struct udp_table *udptable,
 		   int proto)
 {
@@ -803,13 +825,14 @@ int __udp6_lib_rcv(struct sk_buff *skb, struct udp_table *udptable,
 		if (unlikely(sk->sk_rx_dst != dst))
 			udp6_sk_rx_dst_set(sk, dst);
 
-		ret = udpv6_queue_rcv_skb(sk, skb);
-		sock_put(sk);
+		if (!uh->check && !udp_sk(sk)->no_check6_rx) {
+			sock_put(sk);
+			goto report_csum_error;
+		}
 
-		/* a return value > 0 means to resubmit the input */
-		if (ret > 0)
-			return ret;
-		return 0;
+		ret = udp6_unicast_rcv_skb(sk, skb, uh);
+		sock_put(sk);
+		return ret;
 	}
 
 	/*
@@ -822,30 +845,13 @@ int __udp6_lib_rcv(struct sk_buff *skb, struct udp_table *udptable,
 	/* Unicast */
 	sk = __udp6_lib_lookup_skb(skb, uh->source, uh->dest, udptable);
 	if (sk) {
-		int ret;
-
-		if (!uh->check && !udp_sk(sk)->no_check6_rx) {
-			udp6_csum_zero_error(skb);
-			goto csum_error;
-		}
-
-		if (inet_get_convert_csum(sk) && uh->check && !IS_UDPLITE(sk))
-			skb_checksum_try_convert(skb, IPPROTO_UDP, uh->check,
-						 ip6_compute_pseudo);
-
-		ret = udpv6_queue_rcv_skb(sk, skb);
-
-		/* a return value > 0 means to resubmit the input */
-		if (ret > 0)
-			return ret;
-
-		return 0;
+		if (!uh->check && !udp_sk(sk)->no_check6_rx)
+			goto report_csum_error;
+		return udp6_unicast_rcv_skb(sk, skb, uh);
 	}
 
-	if (!uh->check) {
-		udp6_csum_zero_error(skb);
-		goto csum_error;
-	}
+	if (!uh->check)
+		goto report_csum_error;
 
 	if (!xfrm6_policy_check(NULL, XFRM_POLICY_IN, skb))
 		goto discard;
@@ -866,6 +872,9 @@ int __udp6_lib_rcv(struct sk_buff *skb, struct udp_table *udptable,
 			    ulen, skb->len,
 			    daddr, ntohs(uh->dest));
 	goto discard;
+
+report_csum_error:
+	udp6_csum_zero_error(skb);
 csum_error:
 	__UDP6_INC_STATS(net, UDP_MIB_CSUMERRORS, proto == IPPROTO_UDPLITE);
 discard:
Signature · 1 line
2.17.1
maintainer
#3 lore raw
In reply to Paolo Abeni

From: Paolo Abeni <[email protected]>
Date: Thu, 13 Sep 2018 16:27:19 +0200

Quoted 6 lines

The early demux RX path for the UDP protocol is currently missing some checks. Both ipv4 and ipv6 implementations lack checksum conversion and the ipv6 implementation additionally lack the zero checksum validation.

The first patch takes care of UDPv4 and the second one of UDPv6

Series applied and queued up for -stable.