u-boot-tools: fix compile error
cover u-boot-tools: fix compile error
From: Kai Kang <[email protected]>
The following changes since commit 41d89552620bfbc94031d314e6b3d0324f7a330e:
bitbake: fetch2: Avoid warning about incorrect character escaping in regex (2018-11-27 22:15:34 +0000)
are available in the Git repository at:
git://git.pokylinux.org/poky-contrib kangkai/uboot
http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=kangkai/uboot
Kai Kang (1):
u-boot-tools: fix compile error
meta/recipes-bsp/u-boot/u-boot-tools_2018.11.bb | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
Signature · 1 line
2.19.0.rc2
PATCH 1/1 u-boot-tools: fix compile error
From: Kai Kang <[email protected]>
It uses sandbox_defconfig to produce u-boot tools. But EFI is only supported by arm and x86, then it fails to run task do_compile on other arches:
| include/config_distro_bootcmd.h:267:3: error: #error "sandbox EFI | support is only supported on ARM and x86"
Only enable EFI support for u-boot-tools on x86 and arm to fix the issue.
--- meta/recipes-bsp/u-boot/u-boot-tools_2018.11.bb | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
meta/recipes-bsp/u-boot/u-boot-tools_2018.11.bb +8 -1
@@ -17,13 +17,20 @@ EXTRA_OEMAKE_class-target = 'CROSS_COMPILE="${TARGET_PREFIX}" CC="${CC} ${CFLAGS EXTRA_OEMAKE_class-native = 'CC="${BUILD_CC} ${BUILD_CFLAGS} ${BUILD_LDFLAGS}" HOSTCC="${BUILD_CC} ${BUILD_CFLAGS} ${BUILD_LDFLAGS}" STRIP=true V=1' EXTRA_OEMAKE_class-nativesdk = 'CROSS_COMPILE="${HOST_PREFIX}" CC="${CC} ${CFLAGS} ${LDFLAGS}" HOSTCC="${BUILD_CC} ${BUILD_CFLAGS} ${BUILD_LDFLAGS}" STRIP=true V=1' +SED_CONFIG_EFI = '-e "s/CONFIG_EFI_LOADER=.*/# CONFIG_EFI_LOADER is not set/"' +SED_CONFIG_EFI_x86 = '' +SED_CONFIG_EFI_x86-64 = '' +SED_CONFIG_EFI_arm = '' +SED_CONFIG_EFI_armeb = '' +SED_CONFIG_EFI_aarch64 = '' + do_compile () { oe_runmake sandbox_defconfig # Disable CONFIG_CMD_LICENSE, license.h is not used by tools and # generating it requires bin2header tool, which for target build # is built with target tools and thus cannot be executed on host. - sed -i "s/CONFIG_CMD_LICENSE=.*/# CONFIG_CMD_LICENSE is not set/" .config + sed -i -e "s/CONFIG_CMD_LICENSE=.*/# CONFIG_CMD_LICENSE is not set/" ${SED_CONFIG_EFI} .config oe_runmake cross_tools NO_SDL=1 }
Signature · 1 line
2.19.0.rc2
Richard,
Please pick this patch up. This fixes the build issue for this recipe on every architecture besides arm/x86
e.g. see http://errors.yoctoproject.org/Errors/Details/203569/
Quoted 51 lines · On Thu, Nov 29, 2018 at 5:59 PM <[email protected]> wrote:
From: Kai Kang <[email protected]>
It uses
sandbox_defconfigto produce u-boot tools. But EFI is only supported by arm and x86, then it fails to run taskdo_compileon other arches:|
include/config_distro_bootcmd.h:267:3: error: #error "sandbox EFI | support is only supported on ARM and x86"Only enable EFI support for u-boot-tools on x86 and arm to fix the issue.
Signed-off-by Kai Kang <[email protected]>--- meta/recipes-bsp/u-boot/u-boot-tools_2018.11.bb | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)meta/recipes-bsp/u-boot/u-boot-tools_2018.11.bb +8
-2@@ -17,13 +17,20 @@ EXTRA_OEMAKE_class-target = 'CROSS_COMPILE="${TARGET_PREFIX}" CC="${CC} ${CFLAGS EXTRA_OEMAKE_class-native = 'CC="${BUILD_CC} ${BUILD_CFLAGS} ${BUILD_LDFLAGS}" HOSTCC="${BUILD_CC} ${BUILD_CFLAGS} ${BUILD_LDFLAGS}" STRIP=true V=1' EXTRA_OEMAKE_class-nativesdk = 'CROSS_COMPILE="${HOST_PREFIX}" CC="${CC} ${CFLAGS} ${LDFLAGS}" HOSTCC="${BUILD_CC} ${BUILD_CFLAGS} ${BUILD_LDFLAGS}" STRIP=true V=1' +SED_CONFIG_EFI = '-e "s/CONFIG_EFI_LOADER=.*/# CONFIG_EFI_LOADER is not set/"' +SED_CONFIG_EFI_x86 = '' +SED_CONFIG_EFI_x86-64 = '' +SED_CONFIG_EFI_arm = '' +SED_CONFIG_EFI_armeb = '' +SED_CONFIG_EFI_aarch64 = '' + do_compile () { oe_runmake sandbox_defconfig # Disable CONFIG_CMD_LICENSE, license.h is not used by tools and # generating it requires bin2header tool, which for target build # is built with target tools and thus cannot be executed on host. - sed -i "s/CONFIG_CMD_LICENSE=.*/# CONFIG_CMD_LICENSE is not set/" .config + sed -i -e "s/CONFIG_CMD_LICENSE=.*/# CONFIG_CMD_LICENSE is not set/" ${SED_CONFIG_EFI} .config oe_runmake cross_tools NO_SDL=1 } --2.19.0.rc2
--
_______________________________________________
Openembedded-core mailing list
[email protected]
http://lists.openembedded.org/mailman/listinfo/openembedded-core