greybus: gpio: Switch to the gpio descriptor interface
v4 cover greybus: gpio: Switch to the gpio descriptor interface
This patch series converts uses of the old GPIO API to the GPIO descriptor API. It also converts the GPIO driver to use the GPIO irqchip library GPIOLIB_IRQCHIP instead of repimplementing the same.
Changes in v4:
- Changes mentioned in individual patches of the set.
Changes in v3:
- Combines the latest versions of the three greybus patches together in a patch series.
Nishad Kamdar (4):
staging: greybus: gpio: switch GPIO portions to use GPIOLIB_IRQCHIP
staging: greybus: gpio: Use gpiochip_get_data() in place of
gpio_chip_to_gb_gpio_controller()
staging: greybus: arche-apb-ctrl.c: Switch to the gpio descriptor
interface
staging: greybus: arche-platform: Switch to the gpio descriptor
interface
drivers/staging/greybus/Kconfig | 1 + drivers/staging/greybus/TODO | 2 - drivers/staging/greybus/arche-apb-ctrl.c | 154 ++++++++----------- drivers/staging/greybus/arche-platform.c | 124 +++++---------- drivers/staging/greybus/gpio.c | 187 +++-------------------- 5 files changed, 129 insertions(+), 339 deletions(-)
Signature · 1 line
2.17.1
PATCH v4 1/4 staging: greybus: gpio: switch GPIO portions to use GPIOLIB_IRQCHIP
Convert the GPIO driver to use the GPIO irqchip library GPIOLIB_IRQCHIP instead of reimplementing the same.
---
Changes in v4:
- Remove changes related to conversion to gpiochip_get_data() to
include it as a new patch.
- Remove the 'struct irq_chip' field from 'struct gb_gpio_controller'
as struct gpio_chip will have an irqchip whenever
CONFIG_GPIOLIB_IRQCHIP is selected.
- Update the TODO file as per the changes.
Changes in v3:
- Combine patches as into a patch series.
Changes in v2:
- Retained irq.h and irqdomain.h headers.
- Dropped function gb_gpio_irqchip_add() and
called gpiochip_irqchip_add() from probe().
- Referred https://lkml.kernel.org/r/[email protected].
--- drivers/staging/greybus/Kconfig | 1 + drivers/staging/greybus/TODO | 2 - drivers/staging/greybus/gpio.c | 159 +++----------------------------- 3 files changed, 12 insertions(+), 150 deletions(-)
drivers/staging/greybus/Kconfig +1 -0
@@ -148,6 +148,7 @@ if GREYBUS_BRIDGED_PHY config GREYBUS_GPIO tristate "Greybus GPIO Bridged PHY driver" depends on GPIOLIB + select GPIOLIB_IRQCHIP ---help--- Select this option if you have a device that follows the Greybus GPIO Bridged PHY Class specification.
drivers/staging/greybus/TODO +0 -2
@@ -1,5 +1,3 @@ * Convert all uses of the old GPIO API from <linux/gpio.h> to the GPIO descriptor API in <linux/gpio/consumer.h> and look up GPIO lines from device tree or ACPI. -* Convert the GPIO driver to use the GPIO irqchip library - GPIOLIB_IRQCHIP instead of reimplementing the same.
drivers/staging/greybus/gpio.c +11 -148
219 lines not on this page · raw message
Signature · 1 line
2.17.1
Johan Hovold
maintainerRe: [PATCH v4 1/4] staging: greybus: gpio: switch GPIO portions to use GPIOLIB_IRQCHIP
Quoted 11 lines · Nishad Kamdar
Convert the GPIO driver to use the GPIO irqchip library
GPIOLIB_IRQCHIPinstead of reimplementing the same.Signed-off-by Nishad Kamdar <[email protected]>---
Changes in v4:
- Remove changes related to conversion togpiochip_get_data()to include it as a new patch.
- Remove the 'structirq_chip' field from 'structgb_gpio_controller' as structgpio_chipwill have an irqchip wheneverCONFIG_GPIOLIB_IRQCHIPis selected.
Ok, sorry for misleading you this. It seems we cannot use the gpio-chip irqchip, since that will register the irqchip automatically and possibly in an incompatible way. This new functionality is far from well documented, and you basically have to review the gpiolib code to figure it out.
Looks like you need to add back the struct irq_chip.
Johan
PATCH v4 2/4 staging: greybus: gpio: Use gpiochip_get_data() in place of gpio_chip_to_gb_gpio_controller()
In reply to Nishad KamdarThis patch drops gpio_chip_to_gb_gpio_controller(), and uses gpiochip_get_data() to retrieve the container of struct gpio_chip.
---
Changes in v4:
- Introduce this change as a new patch.
--- drivers/staging/greybus/gpio.c | 28 +++++++++++++--------------- 1 file changed, 13 insertions(+), 15 deletions(-)
drivers/staging/greybus/gpio.c +13 -15
@@ -40,8 +40,6 @@ struct gb_gpio_controller {struct gpio_chip chip;struct mutex irq_lock; }; -#define gpio_chip_to_gb_gpio_controller (chip) \ - container_of(chip, struct gb_gpio_controller, chip)#define irq_data_to_gpio_chip (d) (d->domain->host_data)static int gb_gpio_line_count_operation (struct gb_gpio_controller *ggc)
@@ -270,7 +268,7 @@ static void _gb_gpio_irq_set_type(struct gb_gpio_controller *ggc,static void gb_gpio_irq_mask (struct irq_data *d) {struct gpio_chip *chip =irq_data_to_gpio_chip (d); -struct gb_gpio_controller *ggc =gpio_chip_to_gb_gpio_controller (chip); +struct gb_gpio_controller *ggc =gpiochip_get_data (chip);struct gb_gpio_line *line = &ggc->lines[d->hwirq]; line->masked = true;
@@ -280,7 +278,7 @@ static void gb_gpio_irq_mask(struct irq_data *d)static void gb_gpio_irq_unmask (struct irq_data *d) {struct gpio_chip *chip =irq_data_to_gpio_chip (d); -struct gb_gpio_controller *ggc =gpio_chip_to_gb_gpio_controller (chip); +struct gb_gpio_controller *ggc =gpiochip_get_data (chip);struct gb_gpio_line *line = &ggc->lines[d->hwirq]; line->masked = false;
@@ -290,7 +288,7 @@ static void gb_gpio_irq_unmask(struct irq_data *d)static int gb_gpio_irq_set_type (struct irq_data *d,unsigned int type) {struct gpio_chip *chip =irq_data_to_gpio_chip (d); -struct gb_gpio_controller *ggc =gpio_chip_to_gb_gpio_controller (chip); +struct gb_gpio_controller *ggc =gpiochip_get_data (chip);struct gb_gpio_line *line = &ggc->lines[d->hwirq];struct device *dev = &ggc->gbphy_dev->dev;u8 irq_type;
@@ -328,7 +326,7 @@ static int gb_gpio_irq_set_type(struct irq_data *d, unsigned int type)static void gb_gpio_irq_bus_lock (struct irq_data *d) {struct gpio_chip *chip =irq_data_to_gpio_chip (d); -struct gb_gpio_controller *ggc =gpio_chip_to_gb_gpio_controller (chip); +struct gb_gpio_controller *ggc =gpiochip_get_data (chip);mutex_lock (&ggc->irq_lock); }
@@ -336,7 +334,7 @@ static void gb_gpio_irq_bus_lock(struct irq_data *d)static void gb_gpio_irq_bus_sync_unlock (struct irq_data *d) {struct gpio_chip *chip =irq_data_to_gpio_chip (d); -struct gb_gpio_controller *ggc =gpio_chip_to_gb_gpio_controller (chip); +struct gb_gpio_controller *ggc =gpiochip_get_data (chip);struct gb_gpio_line *line = &ggc->lines[d->hwirq];if (line->irq_type_pending) {
@@ -405,21 +403,21 @@ static int gb_gpio_request_handler(struct gb_operation *op)static int gb_gpio_request (struct gpio_chip *chip,unsigned int offset) { -struct gb_gpio_controller *ggc =gpio_chip_to_gb_gpio_controller (chip); +struct gb_gpio_controller *ggc =gpiochip_get_data (chip);return gb_gpio_activate_operation (ggc, (u8 )offset); }static void gb_gpio_free (struct gpio_chip *chip,unsigned int offset) { -struct gb_gpio_controller *ggc =gpio_chip_to_gb_gpio_controller (chip); +struct gb_gpio_controller *ggc =gpiochip_get_data (chip);gb_gpio_deactivate_operation (ggc, (u8 )offset); }static int gb_gpio_get_direction (struct gpio_chip *chip,unsigned int offset) { -struct gb_gpio_controller *ggc =gpio_chip_to_gb_gpio_controller (chip); +struct gb_gpio_controller *ggc =gpiochip_get_data (chip);u8 which;int ret;
@@ -433,7 +431,7 @@ static int gb_gpio_get_direction(struct gpio_chip *chip, unsigned int offset)static int gb_gpio_direction_input (struct gpio_chip *chip,unsigned int offset) { -struct gb_gpio_controller *ggc =gpio_chip_to_gb_gpio_controller (chip); +struct gb_gpio_controller *ggc =gpiochip_get_data (chip);return gb_gpio_direction_in_operation (ggc, (u8 )offset); }
@@ -441,14 +439,14 @@ static int gb_gpio_direction_input(struct gpio_chip *chip, unsigned int offset)static int gb_gpio_direction_output (struct gpio_chip *chip,unsigned int offset,int value) { -struct gb_gpio_controller *ggc =gpio_chip_to_gb_gpio_controller (chip); +struct gb_gpio_controller *ggc =gpiochip_get_data (chip);return gb_gpio_direction_out_operation (ggc, (u8 )offset, !!value); }static int gb_gpio_get (struct gpio_chip *chip,unsigned int offset) { -struct gb_gpio_controller *ggc =gpio_chip_to_gb_gpio_controller (chip); +struct gb_gpio_controller *ggc =gpiochip_get_data (chip);u8 which;int ret;
@@ -462,7 +460,7 @@ static int gb_gpio_get(struct gpio_chip *chip, unsigned int offset)static void gb_gpio_set (struct gpio_chip *chip,unsigned int offset,int value) { -struct gb_gpio_controller *ggc =gpio_chip_to_gb_gpio_controller (chip); +struct gb_gpio_controller *ggc =gpiochip_get_data (chip);gb_gpio_set_value_operation (ggc, (u8 )offset, !!value); }
@@ -470,7 +468,7 @@ static void gb_gpio_set(struct gpio_chip *chip, unsigned int offset, int value)static int gb_gpio_set_config (struct gpio_chip *chip,unsigned int offset,unsigned long config) { -struct gb_gpio_controller *ggc =gpio_chip_to_gb_gpio_controller (chip); +struct gb_gpio_controller *ggc =gpiochip_get_data (chip);u32 debounce;if (pinconf_to_config_param (config) !=PIN_CONFIG_INPUT_DEBOUNCE )
Signature · 1 line
2.17.1
Johan Hovold
maintainerRe: [PATCH v4 2/4] staging: greybus: gpio: Use gpiochip_get_data() in place of gpio_chip_to_gb_gpio_controller()
Quoted 3 lines · Nishad Kamdar
This patch drops
gpio_chip_to_gb_gpio_controller(), and usesgpiochip_get_data()to retrieve the container of structgpio_chip.
So this will break the driver, since gpiochip_add() sets the data pointer to NULL.
These kind of changes are getting too complicated to do without something to test against. We had a module simulator at one point, but not sure what the state of that is now.
I appreciate the effort though, and since we already started, let's try to finish, but please drop this patch for now.
Johan
Re: [PATCH v4 2/4] staging: greybus: gpio: Use gpiochip_get_data() in place of gpio_chip_to_gb_gpio_controller()
Quoted 5 lines · Johan Hovold
Quoted 3 lines · Nishad Kamdar
This patch drops
gpio_chip_to_gb_gpio_controller(), and usesgpiochip_get_data()to retrieve the container of structgpio_chip.
Quoted 7 lines
So this will break the driver, since
gpiochip_add()sets the data pointer to NULL.These kind of changes are getting too complicated to do without something to test against. We had a module simulator at one point, but not sure what the state of that is now.
Ok, I get it.
Quoted 3 lines
I appreciate the effort though, and since we already started, let's try to finish, but please drop this patch for now.
Ok I'll do that.
Quoted 1 line
Johan
Thanks for the review.
Regards,
Nishad
PATCH v4 3/4 staging: greybus: arche-apb-ctrl.c: Switch to the gpio descriptor interface
In reply to Nishad KamdarUse the gpiod interface instead of the deprecated old non-descriptor interface.
---
Changes in v4:
- Use gpiod_set_raw_value() for deassert_reset() and assert_reset() as gpiod_set_value() will change the sematics of these calls by taking any gpio flags into account.
- Remove some unnecesssary line breaks.
- Restore 'spi_en' gpio check in fw_flashing_seq() as it is currently optional.
Changes in v3:
- Add this patch in a patchset.
Changes in v2:
- Resolved compilation errors.
--- drivers/staging/greybus/arche-apb-ctrl.c | 154 ++++++++++------------- 1 file changed, 63 insertions(+), 91 deletions(-)
drivers/staging/greybus/arche-apb-ctrl.c +63 -91
@@ -8,9 +8,8 @@#include <linux/clk.h> #include <linux/delay.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/interrupt.h> -#include <linux/of_gpio.h> #include <linux/of_irq.h> #include <linux/module.h> #include <linux/pinctrl/consumer.h>
@@ -24,12 +23,12 @@ static void apb_bootret_deassert(struct device *dev);struct arche_apb_ctrl_drvdata {/* Control GPIO signals to and from AP <=> AP Bridges */ -int resetn_gpio; -int boot_ret_gpio; -int pwroff_gpio; -int wake_in_gpio; -int wake_out_gpio; -int pwrdn_gpio; +struct gpio_desc *resetn; +struct gpio_desc *boot_ret; +struct gpio_desc *pwroff; +struct gpio_desc *wake_in; +struct gpio_desc *wake_out; +struct gpio_desc *pwrdn;enum arche_platform_state state;bool init_disabled;
@@ -37,28 +36,28 @@ struct arche_apb_ctrl_drvdata {struct regulator *vcore;struct regulator *vio; -int clk_en_gpio; +struct gpio_desc *clk_en;struct clk *clk;struct pinctrl *pinctrl;struct pinctrl_state *pin_default;/* V2: SPI Bus control */ -int spi_en_gpio; +struct gpio_desc *spi_en;bool spi_en_polarity_high; };/* * Note that these low level api's are active high */ -static inline void deassert_reset (unsigned int gpio) +static inline void deassert_reset (struct gpio_desc *gpio) { -gpio_set_value (gpio,1 ); +gpiod_set_raw_value (gpio,1 ); } -static inline void assert_reset (unsigned int gpio) +static inline void assert_reset (struct gpio_desc *gpio) { -gpio_set_value (gpio,0 ); +gpiod_set_raw_value (gpio,0 ); }/*
@@ -75,11 +74,10 @@ static int coldboot_seq(struct platform_device *pdev)return 0 ;/* Hold APB in reset state */ -assert_reset (apb->resetn_gpio); +assert_reset (apb->resetn); -if (apb->state ==ARCHE_PLATFORM_STATE_FW_FLASHING && -gpio_is_valid (apb->spi_en_gpio)) -devm_gpio_free (dev, apb->spi_en_gpio); +if (apb->state ==ARCHE_PLATFORM_STATE_FW_FLASHING && apb->spi_en) +devm_gpiod_put (dev, apb->spi_en);/* Enable power to APB */ if (!IS_ERR (apb->vcore)) {
@@ -101,13 +99,13 @@ static int coldboot_seq(struct platform_device *pdev)apb_bootret_deassert (dev);/* On DB3 clock was not mandatory */ -if (gpio_is_valid (apb->clk_en_gpio)) -gpio_set_value (apb->clk_en_gpio,1 ); +if (apb->clk_en) +gpiod_set_value (apb->clk_en,1 );usleep_range (100 ,200 );/* deassert reset to APB : Active-low signal */ -deassert_reset (apb->resetn_gpio); +deassert_reset (apb->resetn); apb->state =ARCHE_PLATFORM_STATE_ACTIVE ;
@@ -136,25 +134,25 @@ static int fw_flashing_seq(struct platform_device *pdev)return ret; } -if (gpio_is_valid (apb->spi_en_gpio)) { +if (apb->spi_en) {unsigned long flags;if (apb->spi_en_polarity_high) - flags =GPIOF_OUT_INIT_HIGH ; + flags =GPIOD_OUT_HIGH ;else - flags =GPIOF_OUT_INIT_LOW ; + flags =GPIOD_OUT_LOW ; - ret =devm_gpio_request_one (dev, apb->spi_en_gpio, - flags,"apb_spi_en" ); -if (ret) { -dev_err (dev,"Failed requesting SPI bus en gpio %d\n" , - apb->spi_en_gpio); + apb->spi_en =devm_gpiod_get (dev,"gb,spi-en-gpio" , flags); +if (IS_ERR (apb->spi_en)) { + ret =PTR_ERR (apb->spi_en); +dev_err (dev,"Failed requesting SPI bus en GPIO: %d\n" , + ret);return ret; } }/* for flashing device should be in reset state */ -assert_reset (apb->resetn_gpio); +assert_reset (apb->resetn); apb->state =ARCHE_PLATFORM_STATE_FW_FLASHING ;return 0 ;
@@ -176,9 +174,8 @@ static int standby_boot_seq(struct platform_device *pdev) apb->state == ARCHE_PLATFORM_STATE_OFF)return 0 ; -if (apb->state ==ARCHE_PLATFORM_STATE_FW_FLASHING && -gpio_is_valid (apb->spi_en_gpio)) -devm_gpio_free (dev, apb->spi_en_gpio); +if (apb->state ==ARCHE_PLATFORM_STATE_FW_FLASHING && apb->spi_en) +devm_gpiod_put (dev, apb->spi_en);/* * As per WDM spec, do nothing
@@ -201,13 +198,12 @@ static void poweroff_seq(struct platform_device *pdev)if (apb->init_disabled || apb->state ==ARCHE_PLATFORM_STATE_OFF )return ; -if (apb->state ==ARCHE_PLATFORM_STATE_FW_FLASHING && -gpio_is_valid (apb->spi_en_gpio)) -devm_gpio_free (dev, apb->spi_en_gpio); +if (apb->state ==ARCHE_PLATFORM_STATE_FW_FLASHING && apb->spi_en) +devm_gpiod_put (dev, apb->spi_en);/* disable the clock */ -if (gpio_is_valid (apb->clk_en_gpio)) -gpio_set_value (apb->clk_en_gpio,0 ); +if (apb->clk_en) +gpiod_set_value (apb->clk_en,0 );if (!IS_ERR (apb->vcore) &®ulator_is_enabled (apb->vcore) >0 )regulator_disable (apb->vcore);
@@ -216,7 +212,7 @@ static void poweroff_seq(struct platform_device *pdev)regulator_disable (apb->vio);/* As part of exit, put APB back in reset state */ -assert_reset (apb->resetn_gpio); +assert_reset (apb->resetn); apb->state =ARCHE_PLATFORM_STATE_OFF ;/* TODO: May have to send an event to SVC about this exit */
@@ -226,7 +222,7 @@ static void apb_bootret_deassert(struct device *dev) {struct arche_apb_ctrl_drvdata *apb =dev_get_drvdata (dev); -gpio_set_value (apb->boot_ret_gpio,0 ); +gpiod_set_value (apb->boot_ret,0 ); }int apb_ctrl_coldboot (struct device *dev)
@@ -322,66 +318,46 @@ static int apb_ctrl_get_devtree_data(struct platform_device *pdev, struct arche_apb_ctrl_drvdata *apb) {struct device *dev = &pdev->dev; -struct device_node *np = dev->of_node;int ret; - apb->resetn_gpio =of_get_named_gpio (np,"reset-gpios" ,0 ); -if (apb->resetn_gpio <0 ) { -dev_err (dev,"failed to get reset gpio\n" ); -return apb->resetn_gpio; - } - ret =devm_gpio_request_one (dev, apb->resetn_gpio, -GPIOF_OUT_INIT_LOW ,"apb-reset" ); -if (ret) { -dev_err (dev,"Failed requesting reset gpio %d\n" , - apb->resetn_gpio); + apb->resetn =devm_gpiod_get (dev,"gb,reset-gpios" ,GPIOD_OUT_LOW ); +if (IS_ERR (apb->resetn)) { + ret =PTR_ERR (apb->resetn); +dev_err (dev,"Failed requesting reset GPIO: %d\n" , ret);return ret; } - apb->boot_ret_gpio =of_get_named_gpio (np,"boot-ret-gpios" ,0 ); -if (apb->boot_ret_gpio <0 ) { -dev_err (dev,"failed to get boot retention gpio\n" ); -return apb->boot_ret_gpio; - } - ret =devm_gpio_request_one (dev, apb->boot_ret_gpio, -GPIOF_OUT_INIT_LOW ,"boot retention" ); -if (ret) { -dev_err (dev,"Failed requesting bootret gpio %d\n" , - apb->boot_ret_gpio); + apb->boot_ret =devm_gpiod_get (dev,"gb,boot-ret-gpios" ,GPIOD_OUT_LOW ); +if (IS_ERR (apb->boot_ret)) { + ret =PTR_ERR (apb->boot_ret); +dev_err (dev,"Failed requesting bootret GPIO: %d\n" , ret);return ret; }/* It's not mandatory to support power management interface */ - apb->pwroff_gpio =of_get_named_gpio (np,"pwr-off-gpios" ,0 ); -if (apb->pwroff_gpio <0 ) { -dev_err (dev,"failed to get power off gpio\n" ); -return apb->pwroff_gpio; - } - ret =devm_gpio_request_one (dev, apb->pwroff_gpio, -GPIOF_IN ,"pwroff_n" ); -if (ret) { -dev_err (dev,"Failed requesting pwroff_n gpio %d\n" , - apb->pwroff_gpio); + apb->pwroff =devm_gpiod_get_optional (dev,"gb,pwr-off-gpios" , +GPIOD_IN ); +if (IS_ERR (apb->pwroff)) { + ret =PTR_ERR (apb->pwroff); +dev_err (dev,"Failed requesting pwroff_n GPIO: %d\n" , ret);return ret; }/* Do not make clock mandatory as of now (for DB3) */ - apb->clk_en_gpio =of_get_named_gpio (np,"clock-en-gpio" ,0 ); -if (apb->clk_en_gpio <0 ) { -dev_warn (dev,"failed to get clock en gpio\n" ); - }else if (gpio_is_valid (apb->clk_en_gpio)) { - ret =devm_gpio_request_one (dev, apb->clk_en_gpio, -GPIOF_OUT_INIT_LOW ,"apb_clk_en" ); -if (ret) { -dev_warn (dev,"Failed requesting APB clock en gpio %d\n" , - apb->clk_en_gpio); -return ret; - } + apb->clk_en =devm_gpiod_get_optional (dev,"gb,clock-en-gpio" , +GPIOD_OUT_LOW ); +if (IS_ERR (apb->clk_en)) { + ret =PTR_ERR (apb->clk_en); +dev_err (dev,"Failed requesting APB clock en GPIO: %d\n" , ret); +return ret; } - apb->pwrdn_gpio =of_get_named_gpio (np,"pwr-down-gpios" ,0 ); -if (apb->pwrdn_gpio <0 ) -dev_warn (dev,"failed to get power down gpio\n" ); + apb->pwrdn =devm_gpiod_get (dev,"gb,pwr-down-gpios" ,GPIOD_OUT_LOW ); +if (IS_ERR (apb->pwrdn)) { + ret =PTR_ERR (apb->pwrdn); +dev_warn (dev,"Failed requesting power down GPIO: %d\n" , ret); +return ret; + }/* Regulators are optional, as we may have fixed supply coming in */ apb->vcore =devm_regulator_get (dev,"vcore" );
@@ -404,12 +380,8 @@ static int apb_ctrl_get_devtree_data(struct platform_device *pdev, }/* Only applicable for platform >= V2 */ - apb->spi_en_gpio =of_get_named_gpio (np,"spi-en-gpio" ,0 ); -if (apb->spi_en_gpio >=0 ) { -if (of_property_read_bool (pdev->dev.of_node, -"spi-en-active-high" )) - apb->spi_en_polarity_high = true; - } +if (of_property_read_bool (pdev->dev.of_node,"gb,spi-en-active-high" )) + apb->spi_en_polarity_high = true;return 0 ; }
Signature · 1 line
2.17.1
Johan Hovold
maintainerRe: [PATCH v4 3/4] staging: greybus: arche-apb-ctrl.c: Switch to the gpio descriptor interface
Quoted 10 lines · Nishad Kamdar
Use the gpiod interface instead of the deprecated old non-descriptor interface.
Signed-off-by Nishad Kamdar <[email protected]>---
Changes in v4:
- Usegpiod_set_raw_value()fordeassert_reset()andassert_reset()asgpiod_set_value()will change the sematics of these calls by taking any gpio flags into account.
Please also mention this in the commit message (i.e. that we continue to ignore gpio flags from device tree for now).
Quoted 52 lines
- Remove some unnecesssary line breaks.
- Restore 'spi_en' gpio check infw_flashing_seq()as it is currently optional.
Changes in v3:
- Add this patch in a patchset.
Changes in v2:
- Resolved compilation errors.
---drivers/staging/greybus/arche-apb-ctrl.c +8
-9@@ -75,11 +74,10 @@ static int coldboot_seq(struct platform_device *pdev)return 0 ;/* Hold APB in reset state */ -assert_reset (apb->resetn_gpio); +assert_reset (apb->resetn); -if (apb->state ==ARCHE_PLATFORM_STATE_FW_FLASHING && -gpio_is_valid (apb->spi_en_gpio)) -devm_gpio_free (dev, apb->spi_en_gpio); +if (apb->state ==ARCHE_PLATFORM_STATE_FW_FLASHING && apb->spi_en) +devm_gpiod_put (dev, apb->spi_en);/* Enable power to APB */ if (!IS_ERR (apb->vcore)) {@@ -101,13 +99,13 @@ static int coldboot_seq(struct platform_device *pdev)apb_bootret_deassert (dev);/* On DB3 clock was not mandatory */ -if (gpio_is_valid (apb->clk_en_gpio)) -gpio_set_value (apb->clk_en_gpio,1 ); +if (apb->clk_en) +gpiod_set_value (apb->clk_en,1 );usleep_range (100 ,200 );/* deassert reset to APB : Active-low signal */ -deassert_reset (apb->resetn_gpio); +deassert_reset (apb->resetn); apb->state =ARCHE_PLATFORM_STATE_ACTIVE ;@@ -136,25 +134,25 @@ static int fw_flashing_seq(struct platform_device *pdev)return ret; } -if (gpio_is_valid (apb->spi_en_gpio)) { +if (apb->spi_en) {unsigned long flags;if (apb->spi_en_polarity_high) - flags =GPIOF_OUT_INIT_HIGH ; + flags =GPIOD_OUT_HIGH ;
drivers/staging/greybus/arche-apb-ctrl.c static int fw_flashing_seq(struct platform_device *pdev) · line 145
Quoted 10 lines
drivers/staging/greybus/arche-apb-ctrl.c +2
-6else - flags =GPIOF_OUT_INIT_LOW ; + flags =GPIOD_OUT_LOW ; - ret =devm_gpio_request_one (dev, apb->spi_en_gpio, - flags,"apb_spi_en" ); -if (ret) { -dev_err (dev,"Failed requesting SPI bus en gpio %d\n" , - apb->spi_en_gpio); + apb->spi_en =devm_gpiod_get (dev,"gb,spi-en-gpio" , flags);
I just noticed that you change the name of the device-tree property here (and later in apb_ctrl_get_devtree_data()). How is that expected to work without breaking current systems? This will be unavoidable at some point, but must not be snuck into a patch like this without any comment. Please keep the current names for now.
I do think you need to drop the "-gpio" suffix when requesting the gpio though. Please double check to make sure.
Johan
Re: [PATCH v4 3/4] staging: greybus: arche-apb-ctrl.c: Switch to the gpio descriptor interface
Quoted 12 lines · Johan Hovold
Quoted 10 lines · Nishad Kamdar
Use the gpiod interface instead of the deprecated old non-descriptor interface.
Signed-off-by Nishad Kamdar <[email protected]>---
Changes in v4:
- Usegpiod_set_raw_value()fordeassert_reset()andassert_reset()asgpiod_set_value()will change the sematics of these calls by taking any gpio flags into account.
Quoted 3 lines
Please also mention this in the commit message (i.e. that we continue to ignore gpio flags from device tree for now).
Ok, I'll do that.
Quoted 56 lines
Quoted 56 lines
- Remove some unnecesssary line breaks.
- Restore 'spi_en' gpio check infw_flashing_seq()as it is currently optional.
Changes in v3:
- Add this patch in a patchset.
Changes in v2:
- Resolved compilation errors.
---drivers/staging/greybus/arche-apb-ctrl.c +9
-10@@ -75,11 +74,10 @@ static int coldboot_seq(struct platform_device *pdev)return 0 ;/* Hold APB in reset state */ -assert_reset (apb->resetn_gpio); +assert_reset (apb->resetn); -if (apb->state ==ARCHE_PLATFORM_STATE_FW_FLASHING && -gpio_is_valid (apb->spi_en_gpio)) -devm_gpio_free (dev, apb->spi_en_gpio); +if (apb->state ==ARCHE_PLATFORM_STATE_FW_FLASHING && apb->spi_en) +devm_gpiod_put (dev, apb->spi_en);/* Enable power to APB */ if (!IS_ERR (apb->vcore)) {@@ -101,13 +99,13 @@ static int coldboot_seq(struct platform_device *pdev)apb_bootret_deassert (dev);/* On DB3 clock was not mandatory */ -if (gpio_is_valid (apb->clk_en_gpio)) -gpio_set_value (apb->clk_en_gpio,1 ); +if (apb->clk_en) +gpiod_set_value (apb->clk_en,1 );usleep_range (100 ,200 );/* deassert reset to APB : Active-low signal */ -deassert_reset (apb->resetn_gpio); +deassert_reset (apb->resetn); apb->state =ARCHE_PLATFORM_STATE_ACTIVE ;@@ -136,25 +134,25 @@ static int fw_flashing_seq(struct platform_device *pdev)return ret; } -if (gpio_is_valid (apb->spi_en_gpio)) { +if (apb->spi_en) {unsigned long flags;if (apb->spi_en_polarity_high) - flags =GPIOF_OUT_INIT_HIGH ; + flags =GPIOD_OUT_HIGH ;else - flags =GPIOF_OUT_INIT_LOW ; + flags =GPIOD_OUT_LOW ;
Quoted 13 lines
drivers/staging/greybus/arche-apb-ctrl.c static int fw_flashing_seq(struct platform_device *pdev) · line 145
Quoted 6 lines
drivers/staging/greybus/arche-apb-ctrl.c +1
-5- ret =devm_gpio_request_one (dev, apb->spi_en_gpio, - flags,"apb_spi_en" ); -if (ret) { -dev_err (dev,"Failed requesting SPI bus en gpio %d\n" , - apb->spi_en_gpio); + apb->spi_en =devm_gpiod_get (dev,"gb,spi-en-gpio" , flags);I just noticed that you change the name of the device-tree property here (and later in
apb_ctrl_get_devtree_data()). How is that expected to work without breaking current systems? This will be unavoidable at some point, but must not be snuck into a patch like this without any comment. Please keep the current names for now.
Ok, I'll do that.
Quoted 3 lines
I do think you need to drop the "-gpio" suffix when requesting the gpio though. Please double check to make sure.
Ok, I'll check it.
Quoted 1 line
Johan
Thanks for the review.
Regards,
Nishad
PATCH v4 4/4 staging: greybus: arche-platform: Switch to the gpio descriptor interface
In reply to Nishad KamdarUse the gpiod interface instead of the deprecated
old non-descriptor interface.
---
Changes in v4:
- Move 'gpio_desc *svc_sysboot' below the reset flag as it is more logical to have reset flag below reset gpio.
- Remove a few unnecessary line breaks.
Changes in v3:
- Add this patch to a patchset.
Changes in v2:
- Move comment to the same line as to what it applies to.
--- drivers/staging/greybus/arche-platform.c | 124 ++++++++--------------- 1 file changed, 41 insertions(+), 83 deletions(-)
drivers/staging/greybus/arche-platform.c +41 -83
@@ -8,10 +8,9 @@#include <linux/clk.h> #include <linux/delay.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/init.h> #include <linux/module.h> -#include <linux/of_gpio.h> #include <linux/of_platform.h> #include <linux/pinctrl/consumer.h> #include <linux/platform_device.h>
@@ -45,14 +44,14 @@ enum svc_wakedetect_state {struct arche_platform_drvdata {/* Control GPIO signals to and from AP <=> SVC */ -int svc_reset_gpio; +struct gpio_desc *svc_reset;bool is_reset_act_hi; -int svc_sysboot_gpio; -int wake_detect_gpio;/* bi-dir,maps to WAKE_MOD & WAKE_FRAME signals */ +struct gpio_desc *svc_sysboot; +struct gpio_desc *wake_detect;/* bi-dir,maps to WAKE_MOD & WAKE_FRAME signals */ enum arche_platform_state state; -int svc_refclk_req; +struct gpio_desc *svc_refclk_req;struct clk *svc_ref_clk;struct pinctrl *pinctrl;
@@ -85,9 +84,9 @@ static void arche_platform_set_wake_detect_state( arche_pdata->wake_detect_state = state; } -static inline void svc_reset_onoff (unsigned int gpio,bool onoff) +static inline void svc_reset_onoff (struct gpio_desc *gpio,bool onoff) { -gpio_set_value (gpio, onoff); +gpiod_set_value (gpio, onoff); }static int apb_cold_boot (struct device *dev,void *data)
@@ -116,7 +115,6 @@ static int apb_poweroff(struct device *dev, void *data)static void arche_platform_wd_irq_en (struct arche_platform_drvdata *arche_pdata) {/* Enable interrupt here, to read event back from SVC */ -gpio_direction_input (arche_pdata->wake_detect_gpio);enable_irq (arche_pdata->wake_detect_irq); }
@@ -160,7 +158,7 @@ static irqreturn_t arche_platform_wd_irq(int irq, void *devid)spin_lock_irqsave (&arche_pdata->wake_lock, flags); -if (gpio_get_value (arche_pdata->wake_detect_gpio)) { +if (gpiod_get_value (arche_pdata->wake_detect)) {/* wake/detect rising */ /*
@@ -224,10 +222,9 @@ arche_platform_coldboot_seq(struct arche_platform_drvdata *arche_pdata)dev_info (arche_pdata->dev,"Booting from cold boot state\n" ); -svc_reset_onoff (arche_pdata->svc_reset_gpio, - arche_pdata->is_reset_act_hi); +svc_reset_onoff (arche_pdata->svc_reset, arche_pdata->is_reset_act_hi); -gpio_set_value (arche_pdata->svc_sysboot_gpio,0 ); +gpiod_set_value (arche_pdata->svc_sysboot,0 );usleep_range (100 ,200 ); ret =clk_prepare_enable (arche_pdata->svc_ref_clk);
@@ -238,8 +235,7 @@ arche_platform_coldboot_seq(struct arche_platform_drvdata *arche_pdata) }/* bring SVC out of reset */ -svc_reset_onoff (arche_pdata->svc_reset_gpio, - !arche_pdata->is_reset_act_hi); +svc_reset_onoff (arche_pdata->svc_reset, !arche_pdata->is_reset_act_hi);arche_platform_set_state (arche_pdata,ARCHE_PLATFORM_STATE_ACTIVE );
@@ -259,10 +255,9 @@ arche_platform_fw_flashing_seq(struct arche_platform_drvdata *arche_pdata)dev_info (arche_pdata->dev,"Switching to FW flashing state\n" ); -svc_reset_onoff (arche_pdata->svc_reset_gpio, - arche_pdata->is_reset_act_hi); +svc_reset_onoff (arche_pdata->svc_reset, arche_pdata->is_reset_act_hi); -gpio_set_value (arche_pdata->svc_sysboot_gpio,1 ); +gpiod_set_value (arche_pdata->svc_sysboot,1 );usleep_range (100 ,200 );
@@ -273,8 +268,7 @@ arche_platform_fw_flashing_seq(struct arche_platform_drvdata *arche_pdata)return ret; } -svc_reset_onoff (arche_pdata->svc_reset_gpio, - !arche_pdata->is_reset_act_hi); +svc_reset_onoff (arche_pdata->svc_reset, !arche_pdata->is_reset_act_hi);arche_platform_set_state (arche_pdata,ARCHE_PLATFORM_STATE_FW_FLASHING );
@@ -305,8 +299,7 @@ arche_platform_poweroff_seq(struct arche_platform_drvdata *arche_pdata)clk_disable_unprepare (arche_pdata->svc_ref_clk);/* As part of exit, put APB back in reset state */ -svc_reset_onoff (arche_pdata->svc_reset_gpio, - arche_pdata->is_reset_act_hi); +svc_reset_onoff (arche_pdata->svc_reset, arche_pdata->is_reset_act_hi);arche_platform_set_state (arche_pdata,ARCHE_PLATFORM_STATE_OFF ); }
@@ -435,6 +428,7 @@ static int arche_platform_probe(struct platform_device *pdev)struct device *dev = &pdev->dev;struct device_node *np = dev->of_node;int ret; +unsigned int flags; arche_pdata =devm_kzalloc (&pdev->dev,sizeof (*arche_pdata),GFP_KERNEL );
@@ -444,61 +438,33 @@ static int arche_platform_probe(struct platform_device *pdev)/* setup svc reset gpio */ arche_pdata->is_reset_act_hi =of_property_read_bool (np,"svc,reset-active-high" ); - arche_pdata->svc_reset_gpio =of_get_named_gpio (np, -"svc,reset-gpio" , -0 ); -if (!gpio_is_valid (arche_pdata->svc_reset_gpio)) { -dev_err (dev,"failed to get reset-gpio\n" ); -return arche_pdata->svc_reset_gpio; - } - ret =devm_gpio_request (dev, arche_pdata->svc_reset_gpio,"svc-reset" ); -if (ret) { -dev_err (dev,"failed to request svc-reset gpio:%d\n" , ret); -return ret; - } - ret =gpio_direction_output (arche_pdata->svc_reset_gpio, - arche_pdata->is_reset_act_hi); -if (ret) { -dev_err (dev,"failed to set svc-reset gpio dir:%d\n" , ret); +if (arche_pdata->is_reset_act_hi) + flags =GPIOD_OUT_HIGH ; +else + flags =GPIOD_OUT_LOW ; + + arche_pdata->svc_reset =devm_gpiod_get (dev,"svc,reset-gpio" , flags); +if (IS_ERR (arche_pdata->svc_reset)) { + ret =PTR_ERR (arche_pdata->svc_reset); +dev_err (dev,"failed to request svc-reset GPIO:%d\n" , ret);return ret; }arche_platform_set_state (arche_pdata,ARCHE_PLATFORM_STATE_OFF ); - arche_pdata->svc_sysboot_gpio =of_get_named_gpio (np, -"svc,sysboot-gpio" , -0 ); -if (!gpio_is_valid (arche_pdata->svc_sysboot_gpio)) { -dev_err (dev,"failed to get sysboot gpio\n" ); -return arche_pdata->svc_sysboot_gpio; - } - ret =devm_gpio_request (dev, arche_pdata->svc_sysboot_gpio,"sysboot0" ); -if (ret) { -dev_err (dev,"failed to request sysboot0 gpio:%d\n" , ret); -return ret; - } - ret =gpio_direction_output (arche_pdata->svc_sysboot_gpio,0 ); -if (ret) { -dev_err (dev,"failed to set svc-reset gpio dir:%d\n" , ret); + arche_pdata->svc_sysboot =devm_gpiod_get (dev,"svc,sysboot-gpio" , +GPIOD_OUT_LOW ); +if (IS_ERR (arche_pdata->svc_sysboot)) { + ret =PTR_ERR (arche_pdata->svc_sysboot); +dev_err (dev,"failed to request sysboot0 GPIO: %d\n" , ret);return ret; }/* setup the clock request gpio first */ - arche_pdata->svc_refclk_req =of_get_named_gpio (np, -"svc,refclk-req-gpio" , -0 ); -if (!gpio_is_valid (arche_pdata->svc_refclk_req)) { -dev_err (dev,"failed to get svc clock-req gpio\n" ); -return arche_pdata->svc_refclk_req; - } - ret =devm_gpio_request (dev, arche_pdata->svc_refclk_req, -"svc-clk-req" ); -if (ret) { -dev_err (dev,"failed to request svc-clk-req gpio: %d\n" , ret); -return ret; - } - ret =gpio_direction_input (arche_pdata->svc_refclk_req); -if (ret) { -dev_err (dev,"failed to set svc-clk-req gpio dir :%d\n" , ret); + arche_pdata->svc_refclk_req =devm_gpiod_get (dev,"svc,refclk-req-gpio" , +GPIOD_IN ); +if (IS_ERR (arche_pdata->svc_refclk_req)) { + ret =PTR_ERR (arche_pdata->svc_refclk_req); +dev_err (dev,"failed to request svc-clk-req GPIO: %d\n" , ret);return ret; }
@@ -515,19 +481,11 @@ static int arche_platform_probe(struct platform_device *pdev) arche_pdata->num_apbs =of_get_child_count (np);dev_dbg (dev,"Number of APB's available - %d\n" , arche_pdata->num_apbs); - arche_pdata->wake_detect_gpio =of_get_named_gpio (np, -"svc,wake-detect-gpio" , -0 ); -if (arche_pdata->wake_detect_gpio <0 ) { -dev_err (dev,"failed to get wake detect gpio\n" ); -return arche_pdata->wake_detect_gpio; - } - - ret =devm_gpio_request (dev, arche_pdata->wake_detect_gpio, -"wake detect" ); -if (ret) { -dev_err (dev,"Failed requesting wake_detect gpio %d\n" , - arche_pdata->wake_detect_gpio); + arche_pdata->wake_detect =devm_gpiod_get (dev,"svc,wake-detect-gpio" , +GPIOD_IN ); +if (IS_ERR (arche_pdata->wake_detect)) { + ret =PTR_ERR (arche_pdata->wake_detect); +dev_err (dev,"Failed requesting wake_detect GPIO %d\n" , ret);return ret; }
@@ -538,7 +496,7 @@ static int arche_platform_probe(struct platform_device *pdev)spin_lock_init (&arche_pdata->wake_lock);mutex_init (&arche_pdata->platform_state_mutex); arche_pdata->wake_detect_irq = -gpio_to_irq (arche_pdata->wake_detect_gpio); +gpiod_to_irq (arche_pdata->wake_detect); ret = devm_request_threaded_irq(dev, arche_pdata->wake_detect_irq, arche_platform_wd_irq,
Signature · 1 line
2.17.1
Johan Hovold
maintainerRe: [PATCH v4 4/4] staging: greybus: arche-platform: Switch to the gpio descriptor interface
Quoted 16 lines · Nishad Kamdar
Use the gpiod interface instead of the deprecated
old non-descriptor interface.Signed-off-by Nishad Kamdar <[email protected]>---
Changes in v4:
- Move 'gpio_desc*svc_sysboot' below the reset flag as it is more logical to have reset flag below reset gpio.
- Remove a few unnecessary line breaks.
Changes in v3:
- Add this patch to a patchset.
Changes in v2:
- Move comment to the same line as to what it applies to.
---
drivers/staging/greybus/arche-platform.c static void arche_platform_set_wake_detect_state( · line 90
Quoted 6 lines
drivers/staging/greybus/arche-platform.c +2
-2-static inline void svc_reset_onoff (unsigned int gpio,bool onoff) +static inline void svc_reset_onoff (struct gpio_desc *gpio,bool onoff) { -gpio_set_value (gpio, onoff); +gpiod_set_value (gpio, onoff); }
Please use the raw interface here too, until we've done away with the polarity properties and can honour the generic device tree flags. Please make a comment about this in the commit message too.
Quoted 16 lines
drivers/staging/greybus/arche-platform.c +0
-12@@ -444,61 +438,33 @@ static int arche_platform_probe(struct platform_device *pdev)/* setup svc reset gpio */ arche_pdata->is_reset_act_hi =of_property_read_bool (np,"svc,reset-active-high" ); - arche_pdata->svc_reset_gpio =of_get_named_gpio (np, -"svc,reset-gpio" , -0 ); -if (!gpio_is_valid (arche_pdata->svc_reset_gpio)) { -dev_err (dev,"failed to get reset-gpio\n" ); -return arche_pdata->svc_reset_gpio; - } - ret =devm_gpio_request (dev, arche_pdata->svc_reset_gpio,"svc-reset" ); -if (ret) { -dev_err (dev,"failed to request svc-reset gpio:%d\n" , ret); -return ret; - }
drivers/staging/greybus/arche-platform.c static int arche_platform_probe(struct platform_device *pdev) · line 446
Quoted 10 lines
drivers/staging/greybus/arche-platform.c +6
-4- ret =gpio_direction_output (arche_pdata->svc_reset_gpio, - arche_pdata->is_reset_act_hi); -if (ret) { -dev_err (dev,"failed to set svc-reset gpio dir:%d\n" , ret); +if (arche_pdata->is_reset_act_hi) + flags =GPIOD_OUT_HIGH ; +else + flags =GPIOD_OUT_LOW ; + + arche_pdata->svc_reset =devm_gpiod_get (dev,"svc,reset-gpio" , flags);
Again, you cannot just rename devicetree properties like this. Keep the current names for now (and drop the -gpio suffix when requesting).
Johan
Re: [PATCH v4 4/4] staging: greybus: arche-platform: Switch to the gpio descriptor interface
Quoted 17 lines · Johan Hovold
Quoted 15 lines · Nishad Kamdar
Use the gpiod interface instead of the deprecated
old non-descriptor interface.Signed-off-by Nishad Kamdar <[email protected]>---
Changes in v4:
- Move 'gpio_desc*svc_sysboot' below the reset flag as it is more logical to have reset flag below reset gpio.
- Remove a few unnecessary line breaks.
Changes in v3:
- Add this patch to a patchset.
Changes in v2:
- Move comment to the same line as to what it applies to.
---
Quoted 11 lines
drivers/staging/greybus/arche-platform.c static void arche_platform_set_wake_detect_state( · line 90
Quoted 6 lines
drivers/staging/greybus/arche-platform.c +2
-2-static inline void svc_reset_onoff (unsigned int gpio,bool onoff) +static inline void svc_reset_onoff (struct gpio_desc *gpio,bool onoff) { -gpio_set_value (gpio, onoff); +gpiod_set_value (gpio, onoff); }Please use the raw interface here too, until we've done away with the polarity properties and can honour the generic device tree flags. Please make a comment about this in the commit message too.
Ok, I'll do that.
Quoted 21 lines
Quoted 21 lines
drivers/staging/greybus/arche-platform.c +1
-16@@ -444,61 +438,33 @@ static int arche_platform_probe(struct platform_device *pdev)/* setup svc reset gpio */ arche_pdata->is_reset_act_hi =of_property_read_bool (np,"svc,reset-active-high" ); - arche_pdata->svc_reset_gpio =of_get_named_gpio (np, -"svc,reset-gpio" , -0 ); -if (!gpio_is_valid (arche_pdata->svc_reset_gpio)) { -dev_err (dev,"failed to get reset-gpio\n" ); -return arche_pdata->svc_reset_gpio; - } - ret =devm_gpio_request (dev, arche_pdata->svc_reset_gpio,"svc-reset" ); -if (ret) { -dev_err (dev,"failed to request svc-reset gpio:%d\n" , ret); -return ret; - } - ret =gpio_direction_output (arche_pdata->svc_reset_gpio, - arche_pdata->is_reset_act_hi); -if (ret) { -dev_err (dev,"failed to set svc-reset gpio dir:%d\n" , ret); +if (arche_pdata->is_reset_act_hi)
Quoted 9 lines
drivers/staging/greybus/arche-platform.c static int arche_platform_probe(struct platform_device *pdev) · line 446
Quoted 5 lines
drivers/staging/greybus/arche-platform.c +5
-0+ flags =GPIOD_OUT_HIGH ; + else + flags =GPIOD_OUT_LOW ; + + arche_pdata->svc_reset =devm_gpiod_get (dev,"svc,reset-gpio" , flags);Again, you cannot just rename devicetree properties like this. Keep the current names for now (and drop the -gpio suffix when requesting).
Ok, I'll so that.
Quoted 1 line
Johan
Regards,
Nishad