Skip to contentSkip to conversation

Enable accelerated OpenGL in qemu

PATCH In review Alexander Kanavin 3 participants 30 messages Jan 28, 2019 – Jan 29, 2019

lore
Share & tools
lore
#0 lore raw

cover Enable accelerated OpenGL in qemu

V2 changes: addressed feedback from the first review round V3 changes:
- better fix for missing qemu X11 include, as discussed with upstream
- maintainers.inc entry for virglrenderer
- egl-headless support (see below for details)
- improvements to kmscube recipe
- fix to vte-native to allow building it with gcc 4.8
V4 changes
- address failures uncovered by yocto autobuilder

Why this? Why now?

1. I think we are heading towards a reality where some kind of working GL is a 'must' for any kind of UI work.
2. Typically people build images and then transfer them to the NUC or even target boards for testing - using qemu would be less awkward.
3. Current qemu configuration is basically useless here, as it only provides a very slow software GL driver from mesa.

0. TLDR:

a) Gtk UI frontend

$ . oe-init-build-env build-virgl
$ bitbake core-image-sato-sdk
$ runqemu kvm gl
$$ run glxgears or any other GL-capable binary inside qemu

b) egl-headless

$ . oe-init-build-env build-virgl
$ bitbake core-image-sato-sdk
$ runqemu kvm egl-headless publicvnc
$ <connect with a vnc viewer to 127.0.0.1:5900>
$$ run glxgears or any other GL-capable binary inside qemu

1. For the local UI, qemu is switched over to use gtk frontend. I simply couldn't get SDL frontend to work properly, it only displays a blank black window or doesn't start at all. Same thing happens with qemu binaries provided by Fedora and opensuse (Ubuntu's qemu lacks virgl support). Seems like SDL support has regressed.

2. What is egl-headless?

In this variant, Qemu does not open a UI window at all. Instead, it renders all graphics, including GL, into a memory buffer, which can be seen with a vnc or spice client (over a TCP socket). This has the following advantages:

- no need to be physically present at the host machine, output (including GL bits!) can be seen remotely
- no need for the host machine to run an X session

3. While the components are built against the most minimum necessary mesa-native set (gbm, egl, dri with no drivers), libepoxy loads and uses the host GL implementation (through a chrpath hack). This is both to save build times, and because the host is likely to have a set of drivers more appropriate for the physical machine (e.g. proprietary nvidia stack, although I didn't test that).

4. I tested this with
- glamor X server
- weston compositor with drm backend (build core-image-weston, then edit weston.ini in the image to use drm backed instead of fbdev).
- kmscube
- glxgears
- https://www.geeks3d.com/gputest/

The latter two show FPS that is similar to running them directly on the host.

5. Some things I am not sure about:

- how much of a 'default' should this be for running qemu. It works for me,
but other people might find it less stable compared to the existing sdl-vmware-swrast setup.

- what other tests and demos could be run

- how could this be tested on the autobuilder. I wrote two oe-selftests for this (gtk, egl-headless), but one of them does require an X session, and both require ability to create opengl contexts on the host.

The following changes since commit ecfe26834922861ab69602b8c1aa404080f0fb0c:

libtool: Fix ignoring compiler-rt libs (2019-01-27 13:05:17 +0000)

are available in the Git repository at:

git://git.yoctoproject.org/poky-contrib akanavin/virgl-gtk
http://git.yoctoproject.org/cgit.cgi/poky-contrib/log/?h=akanavin/virgl-gtk

Alexander Kanavin (24):
gtk+3: enable native/nativesdk variant
gtk+3: remove the gtk-icon-utils-native recipe
shared-mime-info: update the database also in native builds pixbufcache.bbclass: remove a dependency loop introduced by enabling
gtk+3-native
meta: add native and nativesdk variants to various recipes to enable
gtk+3-native/nativesdk
libepoxy: enable native/nativesdk variants
mesa: enable native and nativesdk variants
virglrenderer: add a recipe
qemu: enable virglrenderer and glx options for native/nativesdk builds
qemu: drop --with-gtkabi option, as it is no longer supported
mesa-gl: do not enable nativesdk variant to avoid clashes with main
mesa recipe
local.conf.sample: adjust the qemu config to enable gtk+ instead of
sdl
qemu: build target variant with gtk+, and nativesdk variant without
sdl
qemu: remove support for building against host sdl
atk: disable gobject-introspection for nativesdk
qemu: add a gettext-native dependency to gtk option
libjpeg-turbo: fix nativesdk build in same way as native builds are
qemu: add a patch to avoid a missing definition error
qemu: add environment variable wrappers to make qemu look good with
gtk frontend
qemu: add a backported patch to fix egl-headless support
runqemu: add options for enabling virgl GL acceleration
runqemu: do not check for GL libraries
selftest: add tests for virgl GL acceleration
vte: allow building vte-native with gcc 4.8

 meta-poky/conf/local.conf.sample              |   9 +-
 meta-selftest/lib/oeqa/runtime/cases/virgl.py |  28 +++++
 meta/classes/pixbufcache.bbclass              |   2 +-
 meta/conf/distro/include/maintainers.inc      |   1 +
 meta/lib/oeqa/selftest/cases/runtime_test.py  |  50 +++++++++
 meta/recipes-devtools/qemu/qemu.inc           |  41 ++++---
 .../qemu/0001-Add-a-missing-X11-include.patch |  65 +++++++++++
 ...-egl-headless-add-egl_create_context.patch |  50 +++++++++
 ...x-libcap-header-issue-on-some-distro.patch |   2 +-
 ...-messages-when-qemi_cpu_kick_thread-.patch |   2 +-
 meta/recipes-devtools/qemu/qemu_3.1.0.bb      |   2 +
 .../gdk-pixbuf/gdk-pixbuf_2.36.11.bb          |   2 +-
 .../gnome/adwaita-icon-theme_3.28.0.bb        |   2 +
 meta/recipes-gnome/gtk+/gtk+3.inc             |  28 ++++-
 .../gtk+/gtk-icon-utils-native_3.22.30.bb     |  63 -----------
 ...endency-from-gtk-encode-symbolic-svg.patch | 102 ------------------
 .../hicolor-icon-theme_0.17.bb                |   2 +
 meta/recipes-graphics/cairo/cairo_1.14.12.bb  |   2 +-
 .../harfbuzz/harfbuzz_2.2.0.bb                |   2 +-
 .../jpeg/libjpeg-turbo_2.0.1.bb               |   3 +-
 .../libepoxy/libepoxy_1.5.3.bb                |  16 +++
 meta/recipes-graphics/mesa/mesa-gl_18.1.9.bb  |   2 +
 meta/recipes-graphics/mesa/mesa.inc           |  20 ++--
 meta/recipes-graphics/pango/pango_1.42.4.bb   |   2 +-
 .../ttf-fonts/liberation-fonts_2.00.1.bb      |   2 +
 .../0001-vtest-add-missing-includes.patch     |  38 +++++++
 .../virglrenderer/virglrenderer_git.bb        |  19 ++++
 .../xorg-lib/libxcomposite_0.4.4.bb           |   2 +-
 .../xorg-lib/libxdamage_1.1.4.bb              |   2 +-
 meta/recipes-graphics/xorg-lib/libxi_1.7.9.bb |   2 +
 .../xorg-lib/libxtst_1.2.3.bb                 |   1 +
 .../recipes-support/atk/at-spi2-atk_2.30.0.bb |   2 +
 .../atk/at-spi2-core_2.30.0.bb                |   1 +
 meta/recipes-support/atk/atk_2.30.0.bb        |   4 +-
 .../shared-mime-info/shared-mime-info.inc     |   2 +
 ...chool-asignment-to-avoid-gcc-4.8-err.patch |  27 +++++
 meta/recipes-support/vte/vte_0.52.2.bb        |   7 +-
 scripts/runqemu                               |  58 ++++------
 38 files changed, 422 insertions(+), 243 deletions(-)
 create mode 100644 meta-selftest/lib/oeqa/runtime/cases/virgl.py
 create mode 100644 meta/recipes-devtools/qemu/qemu/0001-Add-a-missing-X11-include.patch
 create mode 100644 meta/recipes-devtools/qemu/qemu/0001-egl-headless-add-egl_create_context.patch
 delete mode 100644 meta/recipes-gnome/gtk+/gtk-icon-utils-native_3.22.30.bb
 delete mode 100644 meta/recipes-gnome/gtk+/gtk-icon-utils/Remove-Gdk-dependency-from-gtk-encode-symbolic-svg.patch
 create mode 100644 meta/recipes-graphics/virglrenderer/virglrenderer/0001-vtest-add-missing-includes.patch
 create mode 100644 meta/recipes-graphics/virglrenderer/virglrenderer_git.bb
 create mode 100644 meta/recipes-support/vte/vte/0001-app.cc-use-old-school-asignment-to-avoid-gcc-4.8-err.patch
Signature · 1 line
2.17.1
#1 lore raw

PATCH 1/24 gtk+3: enable native/nativesdk variant

Host-assisted GL in Qemu in theory works with both SDL and GTK; in practice SDL shows an empty screen. This prepares the switchover of graphical qemu to use native gtk, which also provides a neat set of menus to control the emulator.

---
 meta/recipes-gnome/gtk+/gtk+3.inc | 25 +++++++++++++++++++++++--
 1 file changed, 23 insertions(+), 2 deletions(-)
meta/recipes-gnome/gtk+/gtk+3.inc +23 -2
index 1b0829de075..0b5fffb752f 100644
@@ -12,6 +12,10 @@ LICENSE = "LGPLv2 & LGPLv2+ & LGPLv2.1+"
 
 inherit autotools gettext pkgconfig gtk-doc update-alternatives gtk-immodules-cache gsettings distro_features_check gobject-introspection
 
+BBCLASSEXTEND = "native nativesdk"
+
+GSETTINGS_PACKAGE_class-native = ""
+
 # versions >= 3.90 are development versions, otherwise like upstream-version-is-even
 UPSTREAM_CHECK_REGEX = "[^\d\.](?P<pver>3\.([1-8]?[02468])+(\.\d+)+)\.tar"
 
@@ -51,14 +55,27 @@ PACKAGECONFIG[glx] = "--enable-glx,--disable-glx,,libgl"
 PACKAGECONFIG[wayland] = "--enable-wayland-backend,--disable-wayland-backend,wayland wayland-protocols libxkbcommon virtual/mesa wayland-native"
 PACKAGECONFIG[cups] = "--enable-cups,--disable-cups,cups"
 
-do_install_append() {
-	mv ${D}${bindir}/gtk-update-icon-cache ${D}${bindir}/gtk-update-icon-cache-3.0
+prepare_gtk_scripts() {
+    mv ${D}${bindir}/gtk-update-icon-cache ${D}${bindir}/gtk-update-icon-cache-3.0
 
     # duplicate gtk-query-immodules for post install script update_gtk_immodules_cache
     mkdir -p ${D}${libexecdir}
     ln ${D}${bindir}/gtk-query-immodules-3.0 ${D}${libexecdir}/${MLPREFIX}gtk-query-immodules-3.0
 }
 
+do_install_append_class-target() {
+    prepare_gtk_scripts
+}
+
+do_install_append_class-nativesdk() {
+    prepare_gtk_scripts
+}
+
+do_install_append_class-native() {
+    # provided by gtk-icon-utils-native
+    rm ${D}${bindir}/gtk-encode-symbolic-svg
+}
+
 PACKAGES =+ "${PN}-demo"
 LIBV = "3.0.0"
 
@@ -104,6 +121,10 @@ GTKBASE_RRECOMMENDS ?= "liberation-fonts \
                         shared-mime-info \
                         adwaita-icon-theme-symbolic \
                         "
+
+GTKBASE_RRECOMMENDS_class-native ?= "\
+                        "
+
 GTKGLIBC_RRECOMMENDS ?= "${GTKBASE_RRECOMMENDS} glibc-gconv-iso8859-1"
 
 RRECOMMENDS_${PN} = "${GTKBASE_RRECOMMENDS}"
Signature · 1 line
2.17.1
#2 lore raw

PATCH 2/24 gtk+3: remove the gtk-icon-utils-native recipe

In reply to Alexander Kanavin

As we are now build native gtk+3, it already provides the necessary utilities.

---
 meta/recipes-gnome/gtk+/gtk+3.inc             |   7 +-
 .../gtk+/gtk-icon-utils-native_3.22.30.bb     |  63 -----------
 ...endency-from-gtk-encode-symbolic-svg.patch | 102 ------------------
 3 files changed, 5 insertions(+), 167 deletions(-)
 delete mode 100644 meta/recipes-gnome/gtk+/gtk-icon-utils-native_3.22.30.bb
 delete mode 100644 meta/recipes-gnome/gtk+/gtk-icon-utils/Remove-Gdk-dependency-from-gtk-encode-symbolic-svg.patch
meta/recipes-gnome/gtk+/gtk+3.inc +5 -2
index 0b5fffb752f..77b6c31536b 100644
@@ -72,10 +72,13 @@ do_install_append_class-nativesdk() {
 }
 
 do_install_append_class-native() {
-    # provided by gtk-icon-utils-native
-    rm ${D}${bindir}/gtk-encode-symbolic-svg
+        create_wrapper ${D}/${bindir}/gtk-update-icon-cache \
+                GDK_PIXBUF_MODULE_FILE=${STAGING_LIBDIR_NATIVE}/gdk-pixbuf-2.0/2.10.0/loaders.cache
+        create_wrapper ${D}/${bindir}/gtk-encode-symbolic-svg \
+                GDK_PIXBUF_MODULE_FILE=${STAGING_LIBDIR_NATIVE}/gdk-pixbuf-2.0/2.10.0/loaders.cache
 }
 
+PROVIDES += "gtk-icon-utils"
 PACKAGES =+ "${PN}-demo"
 LIBV = "3.0.0"
 
meta/recipes-gnome/gtk+/gtk-icon-utils-native_3.22.30.bb deleted +0 -63

63 lines not on this page · raw message

meta/recipes-gnome/gtk+/gtk-icon-utils/Remove-Gdk-dependency-from-gtk-encode-symbolic-svg.patch deleted +0 -102

102 lines not on this page · raw message

Signature · 1 line
2.17.1
#3 lore raw

PATCH 3/24 shared-mime-info: update the database also in native builds

In reply to Alexander Kanavin

Otherwise glib-compile-resources fails when building gtk+3-native.

---
 meta/recipes-support/shared-mime-info/shared-mime-info.inc | 2 ++
 1 file changed, 2 insertions(+)
meta/recipes-support/shared-mime-info/shared-mime-info.inc +2 -0
index 344da7ea77c..3fe1a445b0c 100644
@@ -30,6 +30,8 @@ do_install () {
 
 do_install_class-native () {
 	autotools_do_install
+
+	${B}/update-mime-database ${D}${datadir}/mime
 }
 
 BBCLASSEXTEND = "native nativesdk"
Signature · 1 line
2.17.1
#4 lore raw

PATCH 4/24 pixbufcache.bbclass: remove a dependency loop introduced by enabling gtk+3-native

In reply to Alexander Kanavin
---
 meta/classes/pixbufcache.bbclass | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
meta/classes/pixbufcache.bbclass +1 -1
index 3378ff2c806..fb50cd49659 100644
@@ -3,7 +3,7 @@
 # packages.
 #
 
-DEPENDS += "qemu-native"
+DEPENDS_append_class-target = " qemu-native"
 inherit qemu
 
 PIXBUF_PACKAGES ??= "${PN}"
Signature · 1 line
2.17.1
#5 lore raw

PATCH 5/24 meta: add native and nativesdk variants to various recipes to enable gtk+3-native/nativesdk

In reply to Alexander Kanavin
---
 meta/recipes-gnome/gdk-pixbuf/gdk-pixbuf_2.36.11.bb             | 2 +-
 meta/recipes-gnome/gnome/adwaita-icon-theme_3.28.0.bb           | 2 ++
 .../recipes-gnome/hicolor-icon-theme/hicolor-icon-theme_0.17.bb | 2 ++
 meta/recipes-graphics/cairo/cairo_1.14.12.bb                    | 2 +-
 meta/recipes-graphics/harfbuzz/harfbuzz_2.2.0.bb                | 2 +-
 meta/recipes-graphics/jpeg/libjpeg-turbo_2.0.1.bb               | 2 +-
 meta/recipes-graphics/pango/pango_1.42.4.bb                     | 2 +-
 meta/recipes-graphics/ttf-fonts/liberation-fonts_2.00.1.bb      | 2 ++
 meta/recipes-graphics/xorg-lib/libxcomposite_0.4.4.bb           | 2 +-
 meta/recipes-graphics/xorg-lib/libxdamage_1.1.4.bb              | 2 +-
 meta/recipes-graphics/xorg-lib/libxi_1.7.9.bb                   | 2 ++
 meta/recipes-graphics/xorg-lib/libxtst_1.2.3.bb                 | 1 +
 meta/recipes-support/atk/at-spi2-atk_2.30.0.bb                  | 2 ++
 meta/recipes-support/atk/at-spi2-core_2.30.0.bb                 | 1 +
 meta/recipes-support/atk/atk_2.30.0.bb                          | 2 +-
 meta/recipes-support/vte/vte_0.52.2.bb                          | 2 ++
 16 files changed, 22 insertions(+), 8 deletions(-)
meta/recipes-gnome/gdk-pixbuf/gdk-pixbuf_2.36.11.bb +1 -1
index e4f2eee9764..a7d3884d1fb 100644
@@ -99,4 +99,4 @@ do_install_append_class-native() {
 		GDK_PIXBUF_MODULE_FILE=${STAGING_LIBDIR_NATIVE}/gdk-pixbuf-2.0/${LIBV}/loaders.cache \
 		GDK_PIXBUF_MODULEDIR=${STAGING_LIBDIR_NATIVE}/gdk-pixbuf-2.0/${LIBV}/loaders
 }
-BBCLASSEXTEND = "native"
+BBCLASSEXTEND = "native nativesdk"
meta/recipes-gnome/gnome/adwaita-icon-theme_3.28.0.bb +2 -0
index 40dd35ba306..7102a895955 100644
@@ -42,3 +42,5 @@ FILES_${PN}-hires = "${prefix}/share/icons/Adwaita/256x256/ \
                      ${prefix}/share/icons/Adwaita/512x512/"
 FILES_${PN} = "${prefix}/share/icons/Adwaita/ \
                ${prefix}/share/pkgconfig/adwaita-icon-theme.pc"
+
+BBCLASSEXTEND = "native nativesdk"
meta/recipes-gnome/hicolor-icon-theme/hicolor-icon-theme_0.17.bb +2 -0
index 7064b1942d4..fb8033448d8 100644
@@ -12,3 +12,5 @@ SRC_URI[sha256sum] = "317484352271d18cbbcfac3868eab798d67fff1b8402e740baa6ff41d5
 inherit allarch autotools
 
 FILES_${PN} += "${datadir}/icons"
+
+BBCLASSEXTEND = "native nativesdk"
meta/recipes-graphics/cairo/cairo_1.14.12.bb +1 -1
index 18b947948a3..ad6745f60dc 100644
@@ -84,4 +84,4 @@ FILES_${PN}-script-interpreter = "${libdir}/libcairo-script-interpreter.so.*"
 FILES_${PN}-perf-utils = "${bindir}/cairo-trace* ${libdir}/cairo/*.la ${libdir}/cairo/libcairo-trace.so.*"
 FILES_${PN}-dev += "${libdir}/cairo/*.so"
 
-BBCLASSEXTEND = "native"
+BBCLASSEXTEND = "native nativesdk"
meta/recipes-graphics/harfbuzz/harfbuzz_2.2.0.bb +1 -1
index 3b1e6a8181a..b62082f53d8 100644
@@ -37,4 +37,4 @@ FILES_${PN}-icu-dev = "${libdir}/libharfbuzz-icu.la \
                        ${libdir}/pkgconfig/harfbuzz-icu.pc \
 "
 
-BBCLASSEXTEND = "native"
+BBCLASSEXTEND = "native nativesdk"
meta/recipes-graphics/jpeg/libjpeg-turbo_2.0.1.bb +1 -1
index 72706be674f..d9d877dc0df 100644
@@ -53,4 +53,4 @@ FILES_jpeg-tools = "${bindir}/*"
 DESCRIPTION_libturbojpeg = "A SIMD-accelerated JPEG codec which provides only TurboJPEG APIs"
 FILES_libturbojpeg = "${libdir}/libturbojpeg.so.*"
 
-BBCLASSEXTEND = "native"
+BBCLASSEXTEND = "native nativesdk"
meta/recipes-graphics/pango/pango_1.42.4.bb +1 -1
index 22fe3af15d7..a09f7a8e701 100644
@@ -42,4 +42,4 @@ RDEPENDS_${PN}-ptest += "liberation-fonts cantarell-fonts"
 RPROVIDES_${PN} += "pango-modules pango-module-indic-lang \
                     pango-module-basic-fc pango-module-arabic-lang"
 
-BBCLASSEXTEND = "native"
+BBCLASSEXTEND = "native nativesdk"
meta/recipes-graphics/ttf-fonts/liberation-fonts_2.00.1.bb +2 -0
index 412da48725e..f5df9efa3b7 100644
@@ -37,3 +37,5 @@ do_install () {
 
 PACKAGES = "${PN}"
 FILES_${PN} += "${sysconfdir} ${datadir}"
+
+BBCLASSEXTEND = "native nativesdk"
meta/recipes-graphics/xorg-lib/libxcomposite_0.4.4.bb +1 -1
index 73e29484047..5e26fca7cd5 100644
@@ -16,7 +16,7 @@ LIC_FILES_CHKSUM = "file://COPYING;md5=3f2907aad541f6f226fbc58cc1b3cdf1"
 
 DEPENDS += " xorgproto virtual/libx11 libxfixes libxext"
 PROVIDES = "xcomposite"
-BBCLASSEXTEND = "native"
+BBCLASSEXTEND = "native nativesdk"
 
 PE = "1"
 
meta/recipes-graphics/xorg-lib/libxdamage_1.1.4.bb +1 -1
index 6d6ffadf209..530da0569c5 100644
@@ -18,7 +18,7 @@ LIC_FILES_CHKSUM = "file://COPYING;md5=9fe101f30dd24134cf43146863241868"
 
 DEPENDS += "virtual/libx11 xorgproto libxfixes"
 PROVIDES = "xdamage"
-BBCLASSEXTEND = "native"
+BBCLASSEXTEND = "native nativesdk"
 
 PE = "1"
 
meta/recipes-graphics/xorg-lib/libxi_1.7.9.bb +2 -0
index 08381d9c4d5..ab49cdba3fb 100644
@@ -20,3 +20,5 @@ XORG_PN = "libXi"
 SRC_URI[md5sum] = "1f0f2719c020655a60aee334ddd26d67"
 SRC_URI[sha256sum] = "c2e6b8ff84f9448386c1b5510a5cf5a16d788f76db018194dacdc200180faf45"
 
+BBCLASSEXTEND = "native nativesdk"
+
meta/recipes-graphics/xorg-lib/libxtst_1.2.3.bb +1 -0
index 266bd1ca59c..7837f69d38b 100644
@@ -19,3 +19,4 @@ XORG_PN = "libXtst"
 SRC_URI[md5sum] = "ef8c2c1d16a00bd95b9fdcef63b8a2ca"
 SRC_URI[sha256sum] = "4655498a1b8e844e3d6f21f3b2c4e2b571effb5fd83199d428a6ba7ea4bf5204"
 
+BBCLASSEXTEND = "native nativesdk"
meta/recipes-support/atk/at-spi2-atk_2.30.0.bb +2 -0
index eb4be6b6d86..2244797071f 100644
@@ -18,3 +18,5 @@ PACKAGES =+ "${PN}-gnome ${PN}-gtk2"
 
 FILES_${PN}-gnome = "${libdir}/gnome-settings-daemon-3.0/gtk-modules"
 FILES_${PN}-gtk2 = "${libdir}/gtk-2.0/modules/libatk-bridge.*"
+
+BBCLASSEXTEND = "native nativesdk"
meta/recipes-support/atk/at-spi2-core_2.30.0.bb +1 -0
index 7d2d406cbc2..d0b567a5e57 100644
@@ -38,3 +38,4 @@ FILES_${PN} += "${datadir}/dbus-1/services/*.service \
                 ${datadir}/defaults/at-spi2 \
                 ${systemd_user_unitdir}/at-spi-dbus-bus.service \
                 "
+BBCLASSEXTEND = "native nativesdk"
meta/recipes-support/atk/atk_2.30.0.bb +1 -1
index c950862b6f0..481f8e89a13 100644
@@ -33,5 +33,5 @@ SRC_URI_append = " \
 SRC_URI[archive.md5sum] = "769c85005d392ad17ffbc063f2d26454"
 SRC_URI[archive.sha256sum] = "dd4d90d4217f2a0c1fee708a555596c2c19d26fef0952e1ead1938ab632c027b"
 
-BBCLASSEXTEND = "native"
+BBCLASSEXTEND = "native nativesdk"
 
meta/recipes-support/vte/vte_0.52.2.bb +2 -0
index 7324c9c63d5..62fb5288fa9 100644
@@ -44,3 +44,5 @@ EXTRA_OEMAKE_class-target = "LIBTOOL=${STAGING_BINDIR_CROSS}/${HOST_SYS}-libtool
 
 PACKAGES =+ "libvte"
 FILES_libvte = "${libdir}/*.so.* ${libdir}/girepository-1.0/*"
+
+BBCLASSEXTEND = "native nativesdk"
Signature · 1 line
2.17.1
#6 lore raw

PATCH 6/24 libepoxy: enable native/nativesdk variants

In reply to Alexander Kanavin

libepoxy is a requirement of virglrenderer. Note that we strip RPATH from the library, as this allows fall-through to the host GL implementation, instead of attempting (and failing) to use mesa-native.

---
 meta/recipes-graphics/libepoxy/libepoxy_1.5.3.bb | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
meta/recipes-graphics/libepoxy/libepoxy_1.5.3.bb +16 -0
index 92f644c039d..dd706a96063 100644
@@ -14,9 +14,25 @@ UPSTREAM_CHECK_URI = "https://github.com/anholt/libepoxy/releases"
 inherit meson pkgconfig distro_features_check
 
 REQUIRED_DISTRO_FEATURES = "opengl"
+REQUIRED_DISTRO_FEATURES_class-native = ""
+REQUIRED_DISTRO_FEATURES_class-nativesdk = ""
 
 PACKAGECONFIG[egl] = "-Degl=yes, -Degl=no, virtual/egl"
 PACKAGECONFIG[x11] = "-Dglx=yes, -Dglx=no, virtual/libx11 virtual/libgl"
 PACKAGECONFIG ??= "${@bb.utils.filter('DISTRO_FEATURES', 'x11', d)} egl"
 
 EXTRA_OEMESON += "-Dtests=false"
+
+PACKAGECONFIG_class-native = "egl"
+PACKAGECONFIG_class-nativesdk = "egl"
+
+BBCLASSEXTEND = "native nativesdk"
+
+# This will ensure that dlopen will attempt only GL libraries provided by host
+do_install_append_class-native() {
+	chrpath --delete ${D}${libdir}/*.so
+}
+
+do_install_append_class-nativesdk() {
+	chrpath --delete ${D}${libdir}/*.so
+}
Signature · 1 line
2.17.1
#7 lore raw

PATCH 7/24 mesa: enable native and nativesdk variants

In reply to Alexander Kanavin

Note that only the most minimal necessary subset of mesa is built; particularly we don't build any drivers as that is offloaded to the GL implementation provided by the host.

---
 meta/recipes-graphics/mesa/mesa.inc | 20 +++++++++++++-------
 1 file changed, 13 insertions(+), 7 deletions(-)
meta/recipes-graphics/mesa/mesa.inc +13 -7
index d9e492e94e1..e96a12c1b97 100644
@@ -26,7 +26,9 @@ PROVIDES = " \
 
 inherit autotools pkgconfig python3native gettext distro_features_check
 
-ANY_OF_DISTRO_FEATURES = "opengl vulkan"
+BBCLASSEXTEND = "native nativesdk"
+
+ANY_OF_DISTRO_FEATURES_class-target = "opengl vulkan"
 
 PLATFORMS ??= "${@bb.utils.filter('PACKAGECONFIG', 'x11 wayland', d)} \
                ${@bb.utils.contains('PACKAGECONFIG', 'gbm', 'drm', '', d)} \
@@ -42,11 +44,13 @@ EXTRA_OECONF = "--enable-shared-glapi \
                 --with-llvm-prefix=${STAGING_LIBDIR}/llvm${MESA_LLVM_RELEASE} \
                 --with-platforms='${PLATFORMS}'"
 
-PACKAGECONFIG ??= "${@bb.utils.filter('DISTRO_FEATURES', 'wayland vulkan', d)} \
-                   ${@bb.utils.contains('DISTRO_FEATURES', 'opengl', 'opengl egl gles gbm dri', '', d)} \
+PACKAGECONFIG_class-target ??= "${@bb.utils.filter('DISTRO_FEATURES', 'wayland vulkan', d)} \
+                   ${@bb.utils.contains('DISTRO_FEATURES', 'opengl', 'opengl egl gles gbm dri gallium', '', d)} \
                    ${@bb.utils.contains('DISTRO_FEATURES', 'x11 opengl', 'x11 dri3', '', d)} \
                    ${@bb.utils.contains('DISTRO_FEATURES', 'x11 vulkan', 'dri3', '', d)} \
 		   "
+PACKAGECONFIG_class-native ?= "gbm dri-native egl"
+PACKAGECONFIG_class-nativesdk ?= "gbm dri-native egl"
 
 # "gbm" requires "dri", "opengl"
 PACKAGECONFIG[gbm] = "--enable-gbm,--disable-gbm"
@@ -58,17 +62,19 @@ PACKAGECONFIG[xvmc] = "--enable-xvmc,--disable-xvmc,libxvmc"
 PACKAGECONFIG[wayland] = ",,wayland-native wayland libdrm wayland-protocols"
 
 DRIDRIVERS = "swrast"
-DRIDRIVERS_append_x86 = ",radeon,r200,nouveau,i965,i915"
-DRIDRIVERS_append_x86-64 = ",radeon,r200,nouveau,i965,i915"
+DRIDRIVERS_append_x86_class-target = ",radeon,r200,nouveau,i965,i915"
+DRIDRIVERS_append_x86-64_class-target = ",radeon,r200,nouveau,i965,i915"
 # "dri" requires "opengl"
 PACKAGECONFIG[dri] = "--enable-dri --with-dri-drivers=${DRIDRIVERS}, --disable-dri, xorgproto libdrm"
+# On the native builds we use host's dri drivers
+PACKAGECONFIG[dri-native] = "--enable-dri, , xorgproto libdrm"
 PACKAGECONFIG[dri3] = "--enable-dri3, --disable-dri3, xorgproto libxshmfence"
 
 # Vulkan drivers need dri3 enabled
 # radeon could be enabled as well but requires gallium-llvm with llvm >= 3.9
 VULKAN_DRIVERS = ""
-VULKAN_DRIVERS_append_x86 = ",intel"
-VULKAN_DRIVERS_append_x86-64 = ",intel"
+VULKAN_DRIVERS_append_x86_class-target = ",intel"
+VULKAN_DRIVERS_append_x86-64_class-target = ",intel"
 PACKAGECONFIG[vulkan] = "--with-vulkan-drivers=${VULKAN_DRIVERS}, --without-vulkan-drivers, python3-mako-native"
 
 PACKAGECONFIG[opengl] = "--enable-opengl, --disable-opengl"
Signature · 1 line
2.17.1
#8 lore raw

PATCH 8/24 virglrenderer: add a recipe

In reply to Alexander Kanavin

This component enables hardware-accelerated GL inside QEMU guests. For more information, see here:

https://lwn.net/Articles/767970/
https://www.collabora.com/news-and-blog/blog/2018/02/12/virtualizing-gpu-access/
https://www.collabora.com/news-and-blog/blog/2018/05/09/gpu-virtualization-update/

---
 meta/conf/distro/include/maintainers.inc      |  1 +
 .../0001-vtest-add-missing-includes.patch     | 38 +++++++++++++++++++
 .../virglrenderer/virglrenderer_git.bb        | 19 ++++++++++
 3 files changed, 58 insertions(+)
 create mode 100644 meta/recipes-graphics/virglrenderer/virglrenderer/0001-vtest-add-missing-includes.patch
 create mode 100644 meta/recipes-graphics/virglrenderer/virglrenderer_git.bb
meta/conf/distro/include/maintainers.inc +1 -0
index 8d6eb1afc0d..f369fb13834 100644
@@ -700,6 +700,7 @@ RECIPE_MAINTAINER_pn-util-macros = "Armin Kuster <[email protected]>"
 RECIPE_MAINTAINER_pn-v86d = "Alexander Kanavin <[email protected]>"
 RECIPE_MAINTAINER_pn-vala = "Alexander Kanavin <[email protected]>"
 RECIPE_MAINTAINER_pn-valgrind = "Alexander Kanavin <[email protected]>"
+RECIPE_MAINTAINER_pn-virglrenderer = "Alexander Kanavin <[email protected]>"
 RECIPE_MAINTAINER_pn-volatile-binds = "Chen Qi <[email protected]>"
 RECIPE_MAINTAINER_pn-vte = "Anuj Mittal <[email protected]>"
 RECIPE_MAINTAINER_pn-vulkan = "Ross Burton <[email protected]>"
meta/recipes-graphics/virglrenderer/virglrenderer/0001-vtest-add-missing-includes.patch new file +38 -0
new file mode 100644
index 00000000000..b565c48ee66
@@ -0,0 +1,38 @@
+From 05c5c5f43fbffb3317bd9da27d414890d2ef493c Mon Sep 17 00:00:00 2001
+From: Alexander Kanavin <[email protected]>
+Date: Fri, 18 Jan 2019 13:47:23 +0100
+Subject: [PATCH] vtest: add missing includes
+
+This fixes build failures with musl C library
+
+Upstream-Status: Submitted [https://gitlab.freedesktop.org/virgl/virglrenderer/merge_requests/125]
+Signed-off-by: Alexander Kanavin <[email protected]>
+---
+ vtest/util.c         | 1 +
+ vtest/vtest_server.c | 1 +
+ 2 files changed, 2 insertions(+)
+
+diff --git a/vtest/util.c b/vtest/util.c
+index 0d3c78f..c605253 100644
+--- a/vtest/util.c
++++ b/vtest/util.c
+@@ -26,6 +26,7 @@
+ #include <stdio.h>
+ #include <string.h>
+ #include <unistd.h>
++#include <sys/select.h>
+ 
+ int vtest_wait_for_fd_read(int fd)
+ {
+diff --git a/vtest/vtest_server.c b/vtest/vtest_server.c
+index bc6c95f..010721f 100644
+--- a/vtest/vtest_server.c
++++ b/vtest/vtest_server.c
+@@ -31,6 +31,7 @@
+ #include <netinet/in.h>
+ #include <sys/un.h>
+ #include <fcntl.h>
++#include <string.h>
+ 
+ #include "util.h"
+ #include "vtest.h"
meta/recipes-graphics/virglrenderer/virglrenderer_git.bb new file +19 -0
new file mode 100644
index 00000000000..93fc35feb8d
@@ -0,0 +1,19 @@
+SUMMARY = "VirGL virtual OpenGL renderer"
+HOMEPAGE = "https://virgil3d.github.io/"
+
+LICENSE = "MIT"
+LIC_FILES_CHKSUM = "file://COPYING;md5=c81c08eeefd9418fca8f88309a76db10"
+
+DEPENDS = "libdrm mesa libepoxy"
+PV = "0.7.0"
+SRCREV = "402c228861c9893f64cffbbcb4cb23044b8c721c"
+SRC_URI = "git://anongit.freedesktop.org/virglrenderer \
+           file://0001-vtest-add-missing-includes.patch \
+           "
+
+S = "${WORKDIR}/git"
+
+inherit autotools pkgconfig
+
+BBCLASSEXTEND = "native nativesdk"
+
Signature · 1 line
2.17.1
#9 lore raw

PATCH 9/24 qemu: enable virglrenderer and glx options for native/nativesdk builds

In reply to Alexander Kanavin

Except for ming32/darwin, which do not support them.

---
 meta/recipes-devtools/qemu/qemu.inc | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
meta/recipes-devtools/qemu/qemu.inc +5 -5
index b05c1cee9eb..b6c98a4923b 100644
@@ -74,15 +74,15 @@ PACKAGECONFIG ??= " \
     fdt sdl kvm \
     ${@bb.utils.filter('DISTRO_FEATURES', 'alsa xen', d)} \
 "
-PACKAGECONFIG_class-native ??= "fdt alsa kvm"
-PACKAGECONFIG_class-nativesdk ??= "fdt sdl kvm"
+PACKAGECONFIG_class-native ??= "fdt alsa kvm virglrenderer glx"
+PACKAGECONFIG_class-nativesdk ??= "fdt sdl kvm virglrenderer glx"
 
 # Handle distros such as CentOS 5 32-bit that do not have kvm support
 PACKAGECONFIG_class-native_remove = "${@'kvm' if not os.path.exists('/usr/include/linux/kvm.h') else ''}"
 
-# Disable kvm on targets that do not support it
-PACKAGECONFIG_remove_darwin = "kvm"
-PACKAGECONFIG_remove_mingw32 = "kvm"
+# Disable kvm/virgl/mesa on targets that do not support it
+PACKAGECONFIG_remove_darwin = "kvm virglrenderer glx gtk+"
+PACKAGECONFIG_remove_mingw32 = "kvm virglrenderer glx gtk+"
 
 PACKAGECONFIG[sdl] = "--enable-sdl --with-sdlabi=2.0,--disable-sdl,libsdl2"
 PACKAGECONFIG[virtfs] = "--enable-virtfs --enable-attr,--disable-virtfs,libcap attr,"
Signature · 1 line
2.17.1
#10 lore raw

PATCH 10/24 qemu: drop --with-gtkabi option, as it is no longer supported

In reply to Alexander Kanavin

Recent qemu versions support gtk+3 only.

---
 meta/recipes-devtools/qemu/qemu.inc | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
meta/recipes-devtools/qemu/qemu.inc +1 -1
index b6c98a4923b..95e9e0ede77 100644
@@ -95,7 +95,7 @@ PACKAGECONFIG[vnc-png] = "--enable-vnc --enable-vnc-png,--disable-vnc-png,libpng
 PACKAGECONFIG[libcurl] = "--enable-curl,--disable-curl,libcurl,"
 PACKAGECONFIG[nss] = "--enable-smartcard,--disable-smartcard,nss,"
 PACKAGECONFIG[curses] = "--enable-curses,--disable-curses,ncurses,"
-PACKAGECONFIG[gtk+] = "--enable-gtk --with-gtkabi=3.0 --enable-vte,--disable-gtk --disable-vte,gtk+3 vte"
+PACKAGECONFIG[gtk+] = "--enable-gtk --enable-vte,--disable-gtk --disable-vte,gtk+3 vte"
 PACKAGECONFIG[libcap-ng] = "--enable-cap-ng,--disable-cap-ng,libcap-ng,"
 PACKAGECONFIG[ssh2] = "--enable-libssh2,--disable-libssh2,libssh2,"
 PACKAGECONFIG[gcrypt] = "--enable-gcrypt,--disable-gcrypt,libgcrypt,"
Signature · 1 line
2.17.1
#11 lore raw

PATCH 11/24 mesa-gl: do not enable nativesdk variant to avoid clashes with main mesa recipe

In reply to Alexander Kanavin

An alternative would be setting PREFERRED_PROVIDER, but for native/nativesdk builds mesa-gl is not a viable alternative to mesa, as it lacks all of the bits that make accelerated qemu possible. Using PREFERRED_PROVIDER would imply otherwise.

---
 meta/recipes-graphics/mesa/mesa-gl_18.1.9.bb | 2 ++
 1 file changed, 2 insertions(+)
meta/recipes-graphics/mesa/mesa-gl_18.1.9.bb +2 -0
index 73267eb4f0d..030db6c1440 100644
@@ -7,3 +7,5 @@ PROVIDES = "virtual/libgl virtual/mesa"
 S = "${WORKDIR}/mesa-${PV}"
 
 PACKAGECONFIG ??= "opengl dri ${@bb.utils.filter('DISTRO_FEATURES', 'x11', d)}"
+
+BBCLASSEXTEND_remove = "nativesdk"
Signature · 1 line
2.17.1
#12 lore raw

Re: [PATCH 11/24] mesa-gl: do not enable nativesdk variant to avoid clashes with main mesa recipe

Quoted 23 lines · Alexander Kanavin

An alternative would be setting PREFERRED_PROVIDER, but for native/nativesdk
builds mesa-gl is not a viable alternative to mesa, as it lacks all of the
bits that make accelerated qemu possible. Using PREFERRED_PROVIDER would
imply otherwise.

---
 meta/recipes-graphics/mesa/mesa-gl_18.1.9.bb | 2 ++
 1 file changed, 2 insertions(+)
meta/recipes-graphics/mesa/mesa-gl_18.1.9.bb +0 -0
index 73267eb4f0d..030db6c1440 100644
@@ -7,3 +7,5 @@ PROVIDES = "virtual/libgl virtual/mesa"
 S = "${WORKDIR}/mesa-${PV}"
 
 PACKAGECONFIG ??= "opengl dri ${@bb.utils.filter('DISTRO_FEATURES',

'x11', d)}"

meta/recipes-graphics/mesa/mesa-gl_18.1.9.bb PROVIDES = "virtual/libgl virtual/mesa" · line 11

Quoted 2 lines
meta/recipes-graphics/mesa/mesa-gl_18.1.9.bb +2 -0
+
+BBCLASSEXTEND_remove = "nativesdk"

I really hate using remove in OE-Core. Lets find a different way to do this please as if we do this, its nearly impossible to undo in another layer...

Cheers,

Richard

#13 lore raw

Re: [PATCH 11/24] mesa-gl: do not enable nativesdk variant to avoid clashes with main mesa recipe

Quoted 3 lines · Richard Purdie

I really hate using remove in OE-Core. Lets find a different way to do this please as if we do this, its nearly impossible to undo in another layer...

Sure, I think moving 'BBCLASSEXTEND = "native nativesdk"' from mesa.inc to mesa_*.bb should sort this.

Alex

#14 lore raw

Re: [PATCH 11/24] mesa-gl: do not enable nativesdk variant to avoid clashes with main mesa recipe

Quoted 6 lines · Alexander Kanavin
Quoted 3 lines

I really hate using remove in OE-Core. Lets find a different way to do this please as if we do this, its nearly impossible to undo in another layer...

Sure, I think moving 'BBCLASSEXTEND = "native nativesdk"' from mesa.inc to mesa_*.bb should sort this.

Actually, no - mesa-gl.bb includes mesa.bb, so this moving wouldn't help. I simply set the PREFERRED_PROVIDER instead:

https://git.yoctoproject.org/cgit/cgit.cgi/poky-contrib/commit/?h=akanavin/virgl-gtk&id=b517d2940a19cf19647937ea727959c51fc28c1c

The full branch is otherwise the same:
https://git.yoctoproject.org/cgit/cgit.cgi/poky-contrib/log/?h=akanavin/virgl-gtk

Alex

#15 lore raw

PATCH 12/24 local.conf.sample: adjust the qemu config to enable gtk+ instead of sdl

In reply to Alexander Kanavin
---
 meta-poky/conf/local.conf.sample | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)
meta-poky/conf/local.conf.sample +3 -6
index cf96598819c..961387acbae 100644
@@ -236,12 +236,9 @@ BB_DISKMON_DIRS ??= "\
 # Qemu configuration
 #
 # By default qemu will build with a builtin VNC server where graphical output can be
-# seen. The two lines below enable the SDL backend too. By default libsdl2-native will
-# be built, if you want to use your host's libSDL instead of the minimal libsdl built
-# by libsdl2-native then uncomment the ASSUME_PROVIDED line below.
-PACKAGECONFIG_append_pn-qemu-native = " sdl"
-PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
-#ASSUME_PROVIDED += "libsdl2-native"
+# seen. The two lines below enable the Gtk UI frontend.
+PACKAGECONFIG_append_pn-qemu-native = " gtk+"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " gtk+"
 
 # CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
 # track the version of this file when it was generated. This can safely be ignored if
Signature · 1 line
2.17.1
#16 lore raw

PATCH 13/24 qemu: build target variant with gtk+, and nativesdk variant without sdl

In reply to Alexander Kanavin

As sdl is deprecated in favor of gtk+, it should not be the default.

---
 meta/recipes-devtools/qemu/qemu.inc | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
meta/recipes-devtools/qemu/qemu.inc +2 -2
index 95e9e0ede77..07f78058e7b 100644
@@ -71,11 +71,11 @@ do_install_append() {
 # END of qemu-mips workaround
 
 PACKAGECONFIG ??= " \
-    fdt sdl kvm \
+    fdt gtk+ kvm \
     ${@bb.utils.filter('DISTRO_FEATURES', 'alsa xen', d)} \
 "
 PACKAGECONFIG_class-native ??= "fdt alsa kvm virglrenderer glx"
-PACKAGECONFIG_class-nativesdk ??= "fdt sdl kvm virglrenderer glx"
+PACKAGECONFIG_class-nativesdk ??= "fdt kvm virglrenderer glx"
 
 # Handle distros such as CentOS 5 32-bit that do not have kvm support
 PACKAGECONFIG_class-native_remove = "${@'kvm' if not os.path.exists('/usr/include/linux/kvm.h') else ''}"
Signature · 1 line
2.17.1
#17 lore raw

PATCH 14/24 qemu: remove support for building against host sdl

In reply to Alexander Kanavin

This hasn't been the default for a long time (as some distros don't support it), and with gtk+ being the new default shouldn't be needed at all.

---
 meta/recipes-devtools/qemu/qemu.inc | 8 --------
 1 file changed, 8 deletions(-)
meta/recipes-devtools/qemu/qemu.inc +0 -8
index 07f78058e7b..dccf9dcb00c 100644
@@ -39,14 +39,6 @@ export LIBTOOL="${HOST_SYS}-libtool"
 
 B = "${WORKDIR}/build"
 
-do_configure_prepend_class-native() {
-	# Append build host pkg-config paths for native target since the host may provide sdl
-	BHOST_PKGCONFIG_PATH=$(PATH=/usr/bin:/bin pkg-config --variable pc_path pkg-config || echo "")
-	if [ ! -z "$BHOST_PKGCONFIG_PATH" ]; then
-		export PKG_CONFIG_PATH=$PKG_CONFIG_PATH:$BHOST_PKGCONFIG_PATH
-	fi
-}
-
 do_configure() {
     ${S}/configure ${EXTRA_OECONF}
 }
Signature · 1 line
2.17.1
#18 lore raw

PATCH 15/24 atk: disable gobject-introspection for nativesdk

In reply to Alexander Kanavin

We do not support g-i for nativesdk, neverthless atk tries and fails.

---
 meta/recipes-support/atk/atk_2.30.0.bb | 2 ++
 1 file changed, 2 insertions(+)
meta/recipes-support/atk/atk_2.30.0.bb +2 -0
index 481f8e89a13..4e2dacbc4d8 100644
@@ -20,6 +20,8 @@ GTKDOC_DISABLE_FLAG = "-Ddocs=false"
 GI_ENABLE_FLAG = "-Dintrospection=true"
 GI_DISABLE_FLAG = "-Dintrospection=false"
 
+EXTRA_OEMESON_append_class-nativesdk = " ${GI_DISABLE_FLAG}"
+
 EXTRA_OEMESON_append_class-target = " ${@bb.utils.contains('GI_DATA_ENABLED', 'True', '${GI_ENABLE_FLAG}', \
                                                                                        '${GI_DISABLE_FLAG}', d)} "
 
Signature · 1 line
2.17.1
#19 lore raw

PATCH 16/24 qemu: add a gettext-native dependency to gtk option

In reply to Alexander Kanavin

xgettext/msgmerge is used during do_install() when gtk is enabled:
https://github.com/qemu/qemu/blob/master/Makefile#L743

---
 meta/recipes-devtools/qemu/qemu.inc | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
meta/recipes-devtools/qemu/qemu.inc +1 -1
index dccf9dcb00c..b80b9e131a1 100644
@@ -87,7 +87,7 @@ PACKAGECONFIG[vnc-png] = "--enable-vnc --enable-vnc-png,--disable-vnc-png,libpng
 PACKAGECONFIG[libcurl] = "--enable-curl,--disable-curl,libcurl,"
 PACKAGECONFIG[nss] = "--enable-smartcard,--disable-smartcard,nss,"
 PACKAGECONFIG[curses] = "--enable-curses,--disable-curses,ncurses,"
-PACKAGECONFIG[gtk+] = "--enable-gtk --enable-vte,--disable-gtk --disable-vte,gtk+3 vte"
+PACKAGECONFIG[gtk+] = "--enable-gtk --enable-vte,--disable-gtk --disable-vte,gtk+3 vte gettext-native"
 PACKAGECONFIG[libcap-ng] = "--enable-cap-ng,--disable-cap-ng,libcap-ng,"
 PACKAGECONFIG[ssh2] = "--enable-libssh2,--disable-libssh2,libssh2,"
 PACKAGECONFIG[gcrypt] = "--enable-gcrypt,--disable-gcrypt,libgcrypt,"
Signature · 1 line
2.17.1
#20 lore raw

PATCH 17/24 libjpeg-turbo: fix nativesdk build in same way as native builds are

In reply to Alexander Kanavin
---
 meta/recipes-graphics/jpeg/libjpeg-turbo_2.0.1.bb | 1 +
 1 file changed, 1 insertion(+)
meta/recipes-graphics/jpeg/libjpeg-turbo_2.0.1.bb +1 -0
index d9d877dc0df..029847ff5f4 100644
@@ -31,6 +31,7 @@ inherit cmake pkgconfig
 
 # Add nasm-native dependency consistently for all build arches is hard
 EXTRA_OECMAKE_append_class-native = " -DWITH_SIMD=False"
+EXTRA_OECMAKE_append_class-nativesdk = " -DWITH_SIMD=False"
 
 # Work around missing x32 ABI support
 EXTRA_OECMAKE_append_class-target = " ${@bb.utils.contains("TUNE_FEATURES", "mx32", "-DWITH_SIMD=False", "", d)}"
Signature · 1 line
2.17.1
#21 lore raw

PATCH 18/24 qemu: add a patch to avoid a missing definition error

In reply to Alexander Kanavin
| In file included from /home/alexander/development/poky/build-virgl-gtk-64/tmp/work/x86_64-nativesdk-pokysdk-linux/nativesdk-qemu/3.1.0-r0/qemu-3.1.0/include/ui/egl-context.h:5,
|                  from /home/alexander/development/poky/build-virgl-gtk-64/tmp/work/x86_64-nativesdk-pokysdk-linux/nativesdk-qemu/3.1.0-r0/qemu-3.1.0/ui/egl-context.c:3:
| /home/alexander/development/poky/build-virgl-gtk-64/tmp/work/x86_64-nativesdk-pokysdk-linux/nativesdk-qemu/3.1.0-r0/qemu-3.1.0/include/ui/egl-helpers.h:46:55: error: unknown type name 'Window'; did you mean 'minor'?
|  EGLSurface qemu_egl_init_surface_x11(EGLContext ectx, Window win);
|                                                        ^~~~~~
|                                                        minor
---
 .../qemu/0001-Add-a-missing-X11-include.patch | 65 +++++++++++++++++++
 ...x-libcap-header-issue-on-some-distro.patch |  2 +-
 ...-messages-when-qemi_cpu_kick_thread-.patch |  2 +-
 meta/recipes-devtools/qemu/qemu_3.1.0.bb      |  1 +
 4 files changed, 68 insertions(+), 2 deletions(-)
 create mode 100644 meta/recipes-devtools/qemu/qemu/0001-Add-a-missing-X11-include.patch
meta/recipes-devtools/qemu/qemu/0001-Add-a-missing-X11-include.patch new file +65 -0
new file mode 100644
index 00000000000..192936e1e78
@@ -0,0 +1,65 @@
+From eb1a215a4f86dde4493c3e22ad9f6d698850915e Mon Sep 17 00:00:00 2001
+From: Alexander Kanavin <[email protected]>
+Date: Thu, 20 Dec 2018 18:06:29 +0100
+Subject: [PATCH] egl-helpers.h: do not depend on X11 Window type, use
+ EGLNativeWindowType
+
+It was assumed that mesa provides the necessary X11 includes,
+but it is not always the case, as it can be configured without x11 support.
+
+Upstream-Status: Submitted [http://lists.nongnu.org/archive/html/qemu-devel/2019-01/msg03706.html]
+Signed-off-by: Alexander Kanavin <[email protected]>
+
+---
+ include/ui/egl-helpers.h | 2 +-
+ ui/egl-helpers.c         | 4 ++--
+ ui/gtk-egl.c             | 2 +-
+ 3 files changed, 4 insertions(+), 4 deletions(-)
+
+diff --git a/include/ui/egl-helpers.h b/include/ui/egl-helpers.h
+index 9db7293b..3fc656a7 100644
+--- a/include/ui/egl-helpers.h
++++ b/include/ui/egl-helpers.h
+@@ -43,7 +43,7 @@ void egl_dmabuf_release_texture(QemuDmaBuf *dmabuf);
+ 
+ #endif
+ 
+-EGLSurface qemu_egl_init_surface_x11(EGLContext ectx, Window win);
++EGLSurface qemu_egl_init_surface_x11(EGLContext ectx, EGLNativeWindowType win);
+ 
+ int qemu_egl_init_dpy_x11(EGLNativeDisplayType dpy, DisplayGLMode mode);
+ int qemu_egl_init_dpy_mesa(EGLNativeDisplayType dpy, DisplayGLMode mode);
+diff --git a/ui/egl-helpers.c b/ui/egl-helpers.c
+index 4f475142..5e115b3f 100644
+--- a/ui/egl-helpers.c
++++ b/ui/egl-helpers.c
+@@ -273,14 +273,14 @@ void egl_dmabuf_release_texture(QemuDmaBuf *dmabuf)
+ 
+ /* ---------------------------------------------------------------------- */
+ 
+-EGLSurface qemu_egl_init_surface_x11(EGLContext ectx, Window win)
++EGLSurface qemu_egl_init_surface_x11(EGLContext ectx, EGLNativeWindowType win)
+ {
+     EGLSurface esurface;
+     EGLBoolean b;
+ 
+     esurface = eglCreateWindowSurface(qemu_egl_display,
+                                       qemu_egl_config,
+-                                      (EGLNativeWindowType)win, NULL);
++                                      win, NULL);
+     if (esurface == EGL_NO_SURFACE) {
+         error_report("egl: eglCreateWindowSurface failed");
+         return NULL;
+diff --git a/ui/gtk-egl.c b/ui/gtk-egl.c
+index 5420c236..1f941162 100644
+--- a/ui/gtk-egl.c
++++ b/ui/gtk-egl.c
+@@ -54,7 +54,7 @@ void gd_egl_init(VirtualConsole *vc)
+     }
+ 
+     vc->gfx.ectx = qemu_egl_init_ctx();
+-    vc->gfx.esurface = qemu_egl_init_surface_x11(vc->gfx.ectx, x11_window);
++    vc->gfx.esurface = qemu_egl_init_surface_x11(vc->gfx.ectx, (EGLNativeWindowType)x11_window);
+ 
+     assert(vc->gfx.esurface);
+ }
meta/recipes-devtools/qemu/qemu/0012-fix-libcap-header-issue-on-some-distro.patch +1 -1
index 690d2717f13..9cbe8388119 100644
@@ -1,4 +1,4 @@
-From 091a16100a7e1e9e6493663392c5ba2884b99723 Mon Sep 17 00:00:00 2001
+From d3e0b8dac7c2eb20d7fcff747bc98b981f4398ef Mon Sep 17 00:00:00 2001
 From: Hongxu Jia <[email protected]>
 Date: Tue, 12 Mar 2013 09:54:06 +0800
 Subject: [PATCH] fix libcap header issue on some distro
meta/recipes-devtools/qemu/qemu/0013-cpus.c-Add-error-messages-when-qemi_cpu_kick_thread-.patch +1 -1
index 2232cb80e29..27e508c5a35 100644
@@ -1,4 +1,4 @@
-From 3eeeaa45dd12c9f3942cfc8647a08c93fffe19ea Mon Sep 17 00:00:00 2001
+From 861c522df7791d7e93743d5641f3ef2a5a3c4632 Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?An=C3=ADbal=20Lim=C3=B3n?= <[email protected]>
 Date: Wed, 12 Aug 2015 15:11:30 -0500
 Subject: [PATCH] cpus.c: Add error messages when qemi_cpu_kick_thread fails.
meta/recipes-devtools/qemu/qemu_3.1.0.bb +1 -0
index 67cebcc8308..cd7cd67a3f0 100644
@@ -21,6 +21,7 @@ SRC_URI = "https://download.qemu.org/${BPN}-${PV}.tar.xz \
            file://0009-apic-fixup-fallthrough-to-PIC.patch \
            file://0010-linux-user-Fix-webkitgtk-hangs-on-32-bit-x86-target.patch \
            file://0011-Revert-linux-user-fix-mmap-munmap-mprotect-mremap-sh.patch \
+           file://0001-Add-a-missing-X11-include.patch \
            "
 UPSTREAM_CHECK_REGEX = "qemu-(?P<pver>\d+(\.\d+)+)\.tar"
 
Signature · 1 line
2.17.1
#22 lore raw

PATCH 19/24 qemu: add environment variable wrappers to make qemu look good with gtk frontend

In reply to Alexander Kanavin

GTK_THEME instructs gtk to use its built-in theme. Otherwise gtk attempts to use the theme from the host, which may be from a totally mismatching gtk version.

On the other hand FONTCONFIG_PATH tells it to use the host fonts, as providing fonts in the native sysroot and instructing the components to use them is a lot more tricky.

GDK_PIXBUF_MODULE_FILE is set, because otherwise qemu works but fills stdout with error messages, which eventually fill the pipe they go into. That pipe is read from only when qemu exits (to collect any error messages) by runqemu script. The pipe fill-up causes the qemu process to lock up.

---
 meta/recipes-devtools/qemu/qemu.inc | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)
meta/recipes-devtools/qemu/qemu.inc +19 -0
index b80b9e131a1..9a989f00b0b 100644
@@ -48,6 +48,25 @@ do_install () {
 	oe_runmake 'DESTDIR=${D}' install
 }
 
+make_qemu_wrapper() {
+        gdk_pixbuf_module_file=`pkg-config --variable=gdk_pixbuf_cache_file gdk-pixbuf-2.0`
+
+        for tool in `ls ${D}${bindir}/qemu-system-*`; do
+                create_wrapper $tool \
+                        GDK_PIXBUF_MODULE_FILE=$gdk_pixbuf_module_file \
+                        FONTCONFIG_PATH=/etc/fonts \
+                        GTK_THEME=Adwaita
+        done
+}
+
+do_install_append_class-native() {
+     ${@bb.utils.contains('PACKAGECONFIG', 'gtk+', 'make_qemu_wrapper', '', d)}
+}
+
+do_install_append_class-nativesdk() {
+     ${@bb.utils.contains('PACKAGECONFIG', 'gtk+', 'make_qemu_wrapper', '', d)}
+}
+
 # The following fragment will create a wrapper for qemu-mips user emulation
 # binary in order to work around a segmentation fault issue. Basically, by
 # default, the reserved virtual address space for 32-on-64 bit is set to 4GB.
Signature · 1 line
2.17.1
#23 lore raw

PATCH 20/24 qemu: add a backported patch to fix egl-headless support

In reply to Alexander Kanavin
---
 ...-egl-headless-add-egl_create_context.patch | 50 +++++++++++++++++++
 meta/recipes-devtools/qemu/qemu_3.1.0.bb      |  1 +
 2 files changed, 51 insertions(+)
 create mode 100644 meta/recipes-devtools/qemu/qemu/0001-egl-headless-add-egl_create_context.patch
meta/recipes-devtools/qemu/qemu/0001-egl-headless-add-egl_create_context.patch new file +50 -0
new file mode 100644
index 00000000000..d9326c017ad
@@ -0,0 +1,50 @@
+From 952e5d584f5aabe41298c278065fe628f3f7aa7a Mon Sep 17 00:00:00 2001
+From: Gerd Hoffmann <[email protected]>
+Date: Thu, 29 Nov 2018 13:35:02 +0100
+Subject: [PATCH] egl-headless: add egl_create_context
+
+We must set the correct context (via eglMakeCurrent) before
+calling qemu_egl_create_context, so we need a thin wrapper and can't
+hook qemu_egl_create_context directly as ->dpy_gl_ctx_create callback.
+
+Reported-by: Frederik Carlier <[email protected]>
+Signed-off-by: Gerd Hoffmann <[email protected]>
+Message-id: [email protected]
+
+Upstream-Status: Backport [https://git.qemu.org/?p=qemu.git;a=commit;h=952e5d584f5aabe41298c278065fe628f3f7aa7a]
+Signed-off-by: Alexander Kanavin <[email protected]>
+---
+ ui/egl-headless.c | 10 +++++++++-
+ 1 file changed, 9 insertions(+), 1 deletion(-)
+
+diff --git a/ui/egl-headless.c b/ui/egl-headless.c
+index 4cf3bbc0e4..519e7bad32 100644
+--- a/ui/egl-headless.c
++++ b/ui/egl-headless.c
+@@ -38,6 +38,14 @@ static void egl_gfx_switch(DisplayChangeListener *dcl,
+     edpy->ds = new_surface;
+ }
+ 
++static QEMUGLContext egl_create_context(DisplayChangeListener *dcl,
++                                        QEMUGLParams *params)
++{
++    eglMakeCurrent(qemu_egl_display, EGL_NO_SURFACE, EGL_NO_SURFACE,
++                   qemu_egl_rn_ctx);
++    return qemu_egl_create_context(dcl, params);
++}
++
+ static void egl_scanout_disable(DisplayChangeListener *dcl)
+ {
+     egl_dpy *edpy = container_of(dcl, egl_dpy, dcl);
+@@ -150,7 +158,7 @@ static const DisplayChangeListenerOps egl_ops = {
+     .dpy_gfx_update          = egl_gfx_update,
+     .dpy_gfx_switch          = egl_gfx_switch,
+ 
+-    .dpy_gl_ctx_create       = qemu_egl_create_context,
++    .dpy_gl_ctx_create       = egl_create_context,
+     .dpy_gl_ctx_destroy      = qemu_egl_destroy_context,
+     .dpy_gl_ctx_make_current = qemu_egl_make_context_current,
+     .dpy_gl_ctx_get_current  = qemu_egl_get_current_context,
+-- 
+2.17.1
+
meta/recipes-devtools/qemu/qemu_3.1.0.bb +1 -0
index cd7cd67a3f0..ea4277eddea 100644
@@ -22,6 +22,7 @@ SRC_URI = "https://download.qemu.org/${BPN}-${PV}.tar.xz \
            file://0010-linux-user-Fix-webkitgtk-hangs-on-32-bit-x86-target.patch \
            file://0011-Revert-linux-user-fix-mmap-munmap-mprotect-mremap-sh.patch \
            file://0001-Add-a-missing-X11-include.patch \
+           file://0001-egl-headless-add-egl_create_context.patch \
            "
 UPSTREAM_CHECK_REGEX = "qemu-(?P<pver>\d+(\.\d+)+)\.tar"
 
Signature · 1 line
2.17.1
#24 lore raw

PATCH 21/24 runqemu: add options for enabling virgl GL acceleration

In reply to Alexander Kanavin
---
 scripts/runqemu | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)
scripts/runqemu +23 -0
index c4a0ca811d9..50888a532e8 100755
@@ -74,6 +74,9 @@ of the following environment variables (in any order):
   MACHINE - the machine name (optional, autodetected from KERNEL filename if unspecified)
   Simplified QEMU command-line options can be passed with:
     nographic - disable video console
+    gl - enable virgl-based GL acceleration
+    gl-es - enable virgl-based GL acceleration, using OpenGL ES
+    egl-headless - enable headless EGL output; use vnc or spice to see it
     serial - enable a serial console on /dev/ttyS0
     serialstdio - enable a serial console on the console (regardless of graphics mode)
     slirp - enable user networking, no root privileges is required
@@ -433,6 +436,26 @@ class BaseConfig(object):
             elif arg == 'nographic':
                 self.qemu_opt_script += ' -nographic'
                 self.kernel_cmdline_script += ' console=ttyS0'
+            elif arg == 'gl':
+                self.qemu_opt_script += ' -vga virtio -display gtk,gl=on'
+            elif arg == 'gl-es':
+                self.qemu_opt_script += ' -vga virtio -display gtk,gl=es'
+            elif arg == 'egl-headless':
+                self.qemu_opt_script += ' -vga virtio -display egl-headless'
+                # As runqemu can be run within bitbake (when using testimage, for example),
+                # we need to ensure that we run host pkg-config, and that it does not
+                # get mis-directed to native build paths set by bitbake.
+                try:
+                    del os.environ['PKG_CONFIG_PATH']
+                    del os.environ['PKG_CONFIG_DIR']
+                    del os.environ['PKG_CONFIG_LIBDIR']
+                except KeyError:
+                    pass
+                try:
+                    dripath = subprocess.check_output("PATH=/bin:/usr/bin:$PATH pkg-config --variable=dridriverdir dri", shell=True)
+                except subprocess.CalledProcessError as e:
+                    raise RunQemuError("Could not determine the path to dri drivers on the host via pkg-config.\nPlease install Mesa development files (particularly, dri.pc) on the host machine.")
+                os.environ['LIBGL_DRIVERS_PATH'] = dripath.decode('utf-8').strip()
             elif arg == 'serial':
                 self.kernel_cmdline_script += ' console=ttyS0'
                 self.serialconsole = True
Signature · 1 line
2.17.1
#25 lore raw

PATCH 22/24 runqemu: do not check for GL libraries

In reply to Alexander Kanavin

qemu has been using libepoxy for a long time, and libepoxy loads GL via dlopen() only when instructed to.

---
 scripts/runqemu | 35 -----------------------------------
 1 file changed, 35 deletions(-)
scripts/runqemu +0 -35
index 50888a532e8..586f8700c94 100755
@@ -118,39 +118,6 @@ def check_tun():
     if not os.access(dev_tun, os.W_OK):
         raise RunQemuError("TUN control device %s is not writable, please fix (e.g. sudo chmod 666 %s)" % (dev_tun, dev_tun))
 
-def check_libgl(qemu_bin):
-    cmd = ('ldd', qemu_bin)
-    logger.debug('Running %s...' % str(cmd))
-    need_gl = subprocess.check_output(cmd).decode('utf-8')
-    if re.search('libGLU', need_gl):
-        # We can't run without a libGL.so
-        libgl = False
-        check_files = (('/usr/lib/libGL.so', '/usr/lib/libGLU.so'), \
-            ('/usr/lib64/libGL.so', '/usr/lib64/libGLU.so'), \
-            ('/usr/lib/*-linux-gnu/libGL.so', '/usr/lib/*-linux-gnu/libGLU.so'))
-
-        for (f1, f2) in check_files:
-            if re.search('\*', f1):
-                for g1 in glob.glob(f1):
-                    if libgl:
-                        break
-                    if os.path.exists(g1):
-                        for g2 in glob.glob(f2):
-                            if os.path.exists(g2):
-                                libgl = True
-                                break
-                if libgl:
-                    break
-            else:
-                if os.path.exists(f1) and os.path.exists(f2):
-                    libgl = True
-                    break
-        if not libgl:
-            logger.error("You need libGL.so and libGLU.so to exist in your library path to run the QEMU emulator.")
-            logger.error("Ubuntu package names are: libgl1-mesa-dev and libglu1-mesa-dev.")
-            logger.error("Fedora package names are: mesa-libGL-devel mesa-libGLU-devel.")
-            raise RunQemuError('%s requires libGLU, but not found' % qemu_bin)
-
 def get_first_file(cmds):
     """Return first file found in wildcard cmds"""
     for cmd in cmds:
@@ -1178,8 +1145,6 @@ class BaseConfig(object):
         if not os.access(qemu_bin, os.X_OK):
             raise OEPathError("No QEMU binary '%s' could be found" % qemu_bin)
 
-        check_libgl(qemu_bin)
-
         self.qemu_opt = "%s %s %s %s" % (qemu_bin, self.get('NETWORK_CMD'), self.get('ROOTFS_OPTIONS'), self.get('QB_OPT_APPEND'))
 
         for ovmf in self.ovmf_bios:
Signature · 1 line
2.17.1
#26 lore raw

PATCH 23/24 selftest: add tests for virgl GL acceleration

In reply to Alexander Kanavin

Note that the tests require that the host machine has a X display, has mesa development files installed and is able to create OpenGL contexts.

---
 meta-selftest/lib/oeqa/runtime/cases/virgl.py | 28 +++++++++++
 meta/lib/oeqa/selftest/cases/runtime_test.py  | 50 +++++++++++++++++++
 2 files changed, 78 insertions(+)
 create mode 100644 meta-selftest/lib/oeqa/runtime/cases/virgl.py
meta-selftest/lib/oeqa/runtime/cases/virgl.py new file +28 -0
new file mode 100644
index 00000000000..cc25e77d9c0
@@ -0,0 +1,28 @@
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.depends import OETestDepends
+import subprocess
+import oe
+
+class VirglTest(OERuntimeTestCase):
+
+    @OETestDepends(['ssh.SSHTest.test_ssh'])
+    def test_kernel_driver(self):
+        status, output = self.target.run('dmesg|grep virgl')
+        self.assertEqual(status, 0, "Checking for virgl driver in dmesg returned non-zero: %d\n%s" % (status, output))
+        self.assertIn("virgl 3d acceleration enabled", output, "virgl acceleration seems to be disabled:\n%s" %(output))
+
+    @OETestDepends(['virgl.VirglTest.test_kernel_driver'])
+    def test_kmscube(self):
+        from fnmatch import fnmatch
+
+        try:
+            distro = oe.lsb.distro_identifier()
+        except Exception:
+            distro = None
+
+        if distro and fnmatch(distro, 'centos-7'):
+            self.skipTest('kmscube is not working when centos 7 is the host OS')
+
+        status, output = self.target.run('kmscube', timeout=30)
+        self.assertEqual(status, 0, "kmscube exited with non-zero status %d and output:\n%s" %(status, output))
+        self.assertIn('renderer: "virgl"', output, "kmscube does not seem to use virgl:\n%s" %(output))
meta/lib/oeqa/selftest/cases/runtime_test.py +50 -0

56 lines not on this page · raw message

Signature · 1 line
2.17.1
#27 lore raw

PATCH 24/24 vte: allow building vte-native with gcc 4.8

In reply to Alexander Kanavin
---
 ...chool-asignment-to-avoid-gcc-4.8-err.patch | 27 +++++++++++++++++++
 meta/recipes-support/vte/vte_0.52.2.bb        |  5 ++--
 2 files changed, 30 insertions(+), 2 deletions(-)
 create mode 100644 meta/recipes-support/vte/vte/0001-app.cc-use-old-school-asignment-to-avoid-gcc-4.8-err.patch
meta/recipes-support/vte/vte/0001-app.cc-use-old-school-asignment-to-avoid-gcc-4.8-err.patch new file +27 -0
new file mode 100644
index 00000000000..9c3f98fa61f
@@ -0,0 +1,27 @@
+From 442da9076b52003743ffc6fd7b9d647de6d7aa8f Mon Sep 17 00:00:00 2001
+From: Alexander Kanavin <[email protected]>
+Date: Thu, 17 Jan 2019 16:37:54 +0100
+Subject: [PATCH] app.cc: use old school asignment to avoid gcc 4.8 error
+
+This is needed to build vte-native on Centos 7,
+and can be dropped once that OS is no longer supported.
+
+Upstream-Status: Inappropriate [ancient compiler fix]
+Signed-off-by: Alexander Kanavin <[email protected]>
+---
+ src/app/app.cc | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/src/app/app.cc b/src/app/app.cc
+index d424064..675d789 100644
+--- a/src/app/app.cc
++++ b/src/app/app.cc
+@@ -306,7 +306,7 @@ public:
+                 else
+                         alpha = get_alpha();
+ 
+-                GdkRGBA color{bg_color};
++                GdkRGBA color = bg_color;
+                 color.alpha = alpha;
+                 return color;
+         }
meta/recipes-support/vte/vte_0.52.2.bb +3 -2
index 62fb5288fa9..272ae66f134 100644
@@ -9,8 +9,9 @@ inherit gnomebase gtk-doc distro_features_check upstream-version-is-even gobject
 
 # vapigen.m4 is required when vala is not present (but the one from vala should be used normally)
 SRC_URI += "file://0001-Don-t-enable-stack-protection-by-default.patch \
-            ${@bb.utils.contains('PACKAGECONFIG', 'vala', '', 'file://0001-Add-m4-vapigen.m4.patch', d) } \
-            "
+           ${@bb.utils.contains('PACKAGECONFIG', 'vala', '', 'file://0001-Add-m4-vapigen.m4.patch', d) } \
+           file://0001-app.cc-use-old-school-asignment-to-avoid-gcc-4.8-err.patch \
+           "
 SRC_URI[archive.md5sum] = "de8181350dccb010e915e366bdd06d18"
 SRC_URI[archive.sha256sum] = "0f2657cef52accbfe56feede553155552d7c1984b1291838af3cb8cfc19b26af"
 
Signature · 1 line
2.17.1
#28 lore raw

Re: [PATCH 24/24] vte: allow building vte-native with gcc 4.8

Quoted 14 lines · Alexander Kanavin
---
 ...chool-asignment-to-avoid-gcc-4.8-err.patch | 27 +++++++++++++++++++
 meta/recipes-support/vte/vte_0.52.2.bb        |  5 ++--
 2 files changed, 30 insertions(+), 2 deletions(-)
 create mode 100644 meta/recipes-support/vte/vte/0001-app.cc-use-old-school-asignment-to-avoid-gcc-4.8-err.patch
meta/recipes-support/vte/vte/0001-app.cc-use-old-school-asignment-to-avoid-gcc-4.8-err.patch new file +0 -0
new file mode 100644
index 00000000000..9c3f98fa61f

meta/recipes-support/vte/vte/0001-app.cc-use-old-school-asignment-to-avoid-gcc-4.8-err.patch line 8

Quoted 8 lines
meta/recipes-support/vte/vte/0001-app.cc-use-old-school-asignment-to-avoid-gcc-4.8-err.patch new file +8 -0
@@ -0,0 +1,27 @@
+From 442da9076b52003743ffc6fd7b9d647de6d7aa8f Mon Sep 17 00:00:00 2001
+From: Alexander Kanavin <[email protected]>
+Date: Thu, 17 Jan 2019 16:37:54 +0100
+Subject: [PATCH] app.cc: use old school asignment to avoid gcc 4.8 error
+
+This is needed to build vte-native on Centos 7,
+and can be dropped once that OS is no longer supported.
+

Its fine but it would be good to know what the error it.

Quoted 43 lines
meta/recipes-support/vte/vte/0001-app.cc-use-old-school-asignment-to-avoid-gcc-4.8-err.patch new file +19 -0
+Upstream-Status: Inappropriate [ancient compiler fix]
+Signed-off-by: Alexander Kanavin <[email protected]>
+---
+ src/app/app.cc | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/src/app/app.cc b/src/app/app.cc
+index d424064..675d789 100644
+--- a/src/app/app.cc
++++ b/src/app/app.cc
+@@ -306,7 +306,7 @@ public:
+                 else
+                         alpha = get_alpha();
+
+-                GdkRGBA color{bg_color};
++                GdkRGBA color = bg_color;
+                 color.alpha = alpha;
+                 return color;
+         }
meta/recipes-support/vte/vte_0.52.2.bb +3 -3
index 62fb5288fa9..272ae66f134 100644
@@ -9,8 +9,9 @@ inherit gnomebase gtk-doc distro_features_check upstream-version-is-even gobject
 
 # vapigen.m4 is required when vala is not present (but the one from vala should be used normally)
 SRC_URI += "file://0001-Don-t-enable-stack-protection-by-default.patch \
-            ${@bb.utils.contains('PACKAGECONFIG', 'vala', '', 'file://0001-Add-m4-vapigen.m4.patch', d) } \
-            "
+           ${@bb.utils.contains('PACKAGECONFIG', 'vala', '', 'file://0001-Add-m4-vapigen.m4.patch', d) } \
+           file://0001-app.cc-use-old-school-asignment-to-avoid-gcc-4.8-err.patch \
+           "
 SRC_URI[archive.md5sum] = "de8181350dccb010e915e366bdd06d18"
 SRC_URI[archive.sha256sum] = "0f2657cef52accbfe56feede553155552d7c1984b1291838af3cb8cfc19b26af"
 
--

2.17.1

--
_______________________________________________
Openembedded-core mailing list
[email protected]
http://lists.openembedded.org/mailman/listinfo/openembedded-core

#29 lore raw

Re: [PATCH 24/24] vte: allow building vte-native with gcc 4.8

Quoted 3 lines · Khem Raj

Its fine but it would be good to know what the error it.

Quoted 2 lines
+-                GdkRGBA color{bg_color};
++                GdkRGBA color = bg_color;

Sadly I lost the specific error message, but it was basically not recognizing the above syntax.

Alex