i2c: added driver for Mellanox BlueField SoC
Subsystems (2)
v4 cover i2c: added driver for Mellanox BlueField SoC
Added I2C SMBus driver and device tree bindings documentation.
Changes since v3:
Device bindings documentation:
- Re-order property descriptions.
- Remove useless register addresses from the resource description.
- Mention default clock-frequency value.
- Fix format issues; remove spaces.
- Omit "aliases" from Example section.
- Rename device instance node in Example section.
Khalil Blaiech (2):
i2c: i2c-mlx: I2C SMBus driver for Mellanox BlueField SoC
dt-bindings: i2c: I2C binding for Mellanox BlueField SoC
.../devicetree/bindings/i2c/mellanox,i2c-mlxbf.txt | 29 + drivers/i2c/busses/Kconfig | 13 + drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-mlx.c | 2512 ++++++++++++++++++++ 4 files changed, 2555 insertions(+) create mode 100644 Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.txt create mode 100644 drivers/i2c/busses/i2c-mlx.c
--
2.1.2
PATCH v4 2/2 dt-bindings: i2c: I2C binding for Mellanox BlueField SoC
Added device tree bindings documentation for Mellanox BlueField I2C SMBus controller.
--- .../devicetree/bindings/i2c/mellanox,i2c-mlxbf.txt | 29 ++++++++++++++++++++++ 1 file changed, 29 insertions(+) create mode 100644 Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.txt
Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.txt new file +29 -0
@@ -0,0 +1,29 @@ +Device tree configuration for the Mellanox I2C SMBus on BlueField SoCs + +Required Properties: +- compatible : should be "mellanox,i2c-mlxbf1" or "mellanox,i2c-mlxbf2". + +- reg : address offset and length of the device registers. The + registers consist of the following set of resources: + 1) Smbus block registers. + 2) Cause master registers. + 3) Cause slave registers. + +- interrupts : interrupt number. + +Optional Properties: + +- clock-frequency : bus frequency used to configure timing registers; + allowed values are 100000, 400000 and 1000000; + those are expressed in Hz. Default is 100000. + +Example: + +i2c@2804000 { + compatible = "mellanox,i2c-mlxbf1"; + reg = <0x02804000 0x800>, + <0x02801200 0x020>, + <0x02801260 0x020>; + interrupts = <57>; + clock-frequency = <100000>; +};
Signature · 1 line
2.1.2
Re: [PATCH v4 2/2] dt-bindings: i2c: I2C binding for Mellanox BlueField SoC
Quoted 10 lines · Khalil Blaiech
Added device tree bindings documentation for Mellanox BlueField I2C SMBus controller.
Reviewed-by David Woods <[email protected]>Signed-off-by Khalil Blaiech <[email protected]>--- .../devicetree/bindings/i2c/mellanox,i2c-mlxbf.txt | 29 ++++++++++++++++++++++ 1 file changed, 29 insertions(+) create mode 100644 Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.txt