add support for ASM330LHH

Add support to STM ASM330LHH 6-axis (acc + gyro) Mems sensor
https://www.st.com/resource/en/datasheet/asm330lhh.pdf

Tested-by Mario Tesi <[email protected]>

Signed-off-by Lorenzo Bianconi <[email protected]>

---
 drivers/iio/imu/st_lsm6dsx/Kconfig            |  2 +-
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h       |  2 +
 .../iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c    |  8 ++--
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c  | 41 ++++++++++++++++++-
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c   |  5 +++
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c   |  5 +++
 6 files changed, 57 insertions(+), 6 deletions(-)

drivers/iio/imu/st_lsm6dsx/Kconfig +1 -1

index 094fd006b63d..36048bf0455a 100644
@@ -9,7 +9,7 @@ config IIO_ST_LSM6DSX
 	help
 	  Say yes here to build support for STMicroelectronics LSM6DSx imu
 	  sensor. Supported devices: lsm6ds3, lsm6ds3h, lsm6dsl, lsm6dsm,
-	  ism330dlc, lsm6dso
+	  ism330dlc, lsm6dso, asm330lhh
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called st_lsm6dsx.

drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h +2 -0

index d1d8d07a0714..de2a0dc39353 100644
@@ -20,6 +20,7 @@
 #define ST_LSM6DSM_DEV_NAME	"lsm6dsm"
 #define ST_ISM330DLC_DEV_NAME	"ism330dlc"
 #define ST_LSM6DSO_DEV_NAME	"lsm6dso"
+#define ST_ASM330LHH_DEV_NAME	"asm330lhh"
 
 enum st_lsm6dsx_hw_id {
 	ST_LSM6DS3_ID,

@@ -28,6 +29,7 @@ enum st_lsm6dsx_hw_id {
 	ST_LSM6DSM_ID,
 	ST_ISM330DLC_ID,
 	ST_LSM6DSO_ID,
+	ST_ASM330LHH_ID,
 	ST_LSM6DSX_MAX_ID,
 };
 

drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c +4 -4

index 2c0d3763405a..8f443bdb5b51 100644
@@ -13,9 +13,9 @@
  * (e.g. Gx, Gy, Gz, Ax, Ay, Az), then data are repeated depending on the
  * value of the decimation factor and ODR set for each FIFO data set.
  *
- * LSM6DSO: The FIFO buffer can be configured to store data from gyroscope and
- * accelerometer. Each sample is queued with a tag (1B) indicating data source
- * (gyroscope, accelerometer, hw timer).
+ * LSM6DSO/ASM330LHH: The FIFO buffer can be configured to store data
+ * from gyroscope and accelerometer. Each sample is queued with a tag (1B)
+ * indicating data source (gyroscope, accelerometer, hw timer).
  *
  * FIFO supported modes:
  *  - BYPASS: FIFO disabled

@@ -506,7 +506,7 @@ st_lsm6dsx_push_tagged_data(struct st_lsm6dsx_hw *hw, u8 tag,
 }
 
 /**
- * st_lsm6dsx_read_tagged_fifo() - LSM6DSO read FIFO routine
+ * st_lsm6dsx_read_tagged_fifo() - LSM6DSO/ASM330LHH read FIFO routine
  * @hw: Pointer to instance of struct st_lsm6dsx_hw.
  *
  * Read samples from the hw FIFO and push them to IIO buffers.

drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c +40 -1

index 12e29dda9b98..50cab3531b11 100644
@@ -23,7 +23,7 @@
  *   - Gyroscope supported full-scale [dps]: +-125/+-245/+-500/+-1000/+-2000
  *   - FIFO size: 4KB
  *
- * - LSM6DSO
+ * - LSM6DSO/ASM330LHH
  *   - Accelerometer/Gyroscope supported ODR [Hz]: 13, 26, 52, 104, 208, 416
  *   - Accelerometer supported full-scale [g]: +-2/+-4/+-8/+-16
  *   - Gyroscope supported full-scale [dps]: +-125/+-245/+-500/+-1000/+-2000

@@ -347,6 +347,45 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 			.batch_en = BIT(3),
 		}
 	},
+	{
+		.wai = 0x6b,
+		.max_fifo_size = 512,
+		.id = {
+			[0] = ST_ASM330LHH_ID,
+		},
+		.batch = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.addr = 0x09,
+				.mask = GENMASK(3, 0),
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.addr = 0x09,
+				.mask = GENMASK(7, 4),
+			},
+		},
+		.fifo_ops = {
+			.read_fifo = st_lsm6dsx_read_tagged_fifo,
+			.fifo_th = {
+				.addr = 0x07,
+				.mask = GENMASK(8, 0),
+			},
+			.fifo_diff = {
+				.addr = 0x3a,
+				.mask = GENMASK(8, 0),
+			},
+			.th_wl = 1,
+		},
+		.ts_settings = {
+			.timer_en = {
+				.addr = 0x19,
+				.mask = BIT(5),
+			},
+			.decimator = {
+				.addr = 0x0a,
+				.mask = GENMASK(7, 6),
+			},
+		},
+	},
 };
 
 static const struct iio_chan_spec st_lsm6dsx_acc_channels[] = {

drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c +5 -0

index 448b7bc1e578..00b4b702645a 100644
@@ -65,6 +65,10 @@ static const struct of_device_id st_lsm6dsx_i2c_of_match[] = {
 		.compatible = "st,lsm6dso",
 		.data = (void *)ST_LSM6DSO_ID,
 	},
+	{
+		.compatible = "st,asm330lhh",
+		.data = (void *)ST_ASM330LHH_ID,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, st_lsm6dsx_i2c_of_match);

@@ -76,6 +80,7 @@ static const struct i2c_device_id st_lsm6dsx_i2c_id_table[] = {
 	{ ST_LSM6DSM_DEV_NAME, ST_LSM6DSM_ID },
 	{ ST_ISM330DLC_DEV_NAME, ST_ISM330DLC_ID },
 	{ ST_LSM6DSO_DEV_NAME, ST_LSM6DSO_ID },
+	{ ST_ASM330LHH_DEV_NAME, ST_ASM330LHH_ID },
 	{},
 };
 MODULE_DEVICE_TABLE(i2c, st_lsm6dsx_i2c_id_table);

drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c +5 -0

index b1df8a6973e6..836256c2ac7d 100644
@@ -65,6 +65,10 @@ static const struct of_device_id st_lsm6dsx_spi_of_match[] = {
 		.compatible = "st,lsm6dso",
 		.data = (void *)ST_LSM6DSO_ID,
 	},
+	{
+		.compatible = "st,asm330lhh",
+		.data = (void *)ST_ASM330LHH_ID,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, st_lsm6dsx_spi_of_match);

@@ -76,6 +80,7 @@ static const struct spi_device_id st_lsm6dsx_spi_id_table[] = {
 	{ ST_LSM6DSM_DEV_NAME, ST_LSM6DSM_ID },
 	{ ST_ISM330DLC_DEV_NAME, ST_ISM330DLC_ID },
 	{ ST_LSM6DSO_DEV_NAME, ST_LSM6DSO_ID },
+	{ ST_ASM330LHH_DEV_NAME, ST_ASM330LHH_ID },
 	{},
 };
 MODULE_DEVICE_TABLE(spi, st_lsm6dsx_spi_id_table);

Signed-off-by Lorenzo Bianconi <[email protected]>

---
 Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt | 1 +
 1 file changed, 1 insertion(+)

Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt +1 -0

index 69d53d98d0f0..8f1b09e39c72 100644
@@ -8,6 +8,7 @@ Required properties:
   "st,lsm6dsm"
   "st,ism330dlc"
   "st,lsm6dso"
+  "st,asm330lhh"
 - reg: i2c address of the sensor / spi cs line
 
 Optional properties: