Skip to contentSkip to conversation

thermal: tsens: Refactor to use regmap_field

PATCH In review Amit Kucheria 1 participant 25 messages Mar 20, 2019 – Jun 24, 2019

Subsystems (5)
lore
Share & tools
lore
#0 lore raw

v3 cover thermal: tsens: Refactor to use regmap_field

Changes pending from earlier reviews:
- Using macros from bits.h as suggested by Eduardo. I'd like to defer this change to a separate series where I can convert over all the files (v0.1, v1, v2) together. This series is getting quite long as it is.

Changes since v2:
- Simplify qcs404 device tree by changing 'passive' trips on non-throttling devices to 'hot' type. Update the trip points too.
- Replace IP version reads with just a version major number in the feature data structure. This is enough for differenting between IPs for different code paths for now.
- Fix off-by-one typo in the REG_FIELD_FOR_EACH_ macro names.

Changes since v1:
- Anything not being throttled in the kernel converted to a hot trip point (no cooling-maps)
- Don't print version number of the IP at boot

Description
-----------
Short term bandaid fixes to add support for more versions of the TSENS IP is not proving to be very scalable. Here is a series to finally convert the driver's core to use regmap_fields so that register addresses and bitfields can be abstracted away from the code.

This series is posted as one to give a complete view of where I'm going with this refactor. We can probably split it into smaller sets if required. Currently it consists of the following parts:

- Patch 01-06: Style changes to make code easier to read (mostly naming related). This has no functional change in the driver, it is a series of search and replace operations. Ideally this will get merged first, otherwise everything else will become painful :-)

- Patch 07-09: Merge the 8916 and 8974 source files into a single one called v0_1.c denoting the version of the IP and open up more opportunities for reuse.

- Patch 10: This is the core patch that adds IP-specific data based on two data structures: tsens_features has bit flags to identify if a certain feature is available in a version or not and an array of reg_field pointers.

regfield_ids list the important fields across IP versions and are used as an index.

This patch converts over all platforms except 8960 which currently doesn't use DT data for tsens and has custom functions for everything. We will get to it eventually, but it's conversion is not necessary for this series to be merged.

- Patch 11-15: Clean ups, new functionality and bugfixes based on regmap_field

- Patch 16-18: Refactor the get_temp routine. We expect to have a single get_temp routine once all the conversion is finished.

- Patch 20-22: Introduce qcs404 support using new regmap infrastructure.

Testing
-------

Since these changes affect every platform using TSENS, it should be clarified that I have only been focussing on developing/testing this on sdm845, msm8916, qcs404.

Future work
-----------
a. Get rid of get_temp_common in favour of get_temp_tsens_valid b. irq support (coming soon)
c. Convert over 8960 to use regmap_field and as a result common functions

Amit Kucheria (23):
drivers: thermal: tsens: Document the data structures
drivers: thermal: tsens: Rename tsens_data
drivers: thermal: tsens: Rename tsens_device
drivers: thermal: tsens: Rename variable tmdev
drivers: thermal: tsens: Use consistent names for variables
drivers: thermal: tsens: Function prototypes should have argument
names
drivers: thermal: tsens: Rename tsens-8916 to prepare to merge with

    tsens-8974
  drivers: thermal: tsens: Rename constants to prepare to merge with
    tsens-8974

drivers: thermal: tsens: Merge tsens-8974 into tsens-v0_1
drivers: thermal: tsens: Introduce reg_fields to deal with register
description
drivers: thermal: tsens: Save reference to the device pointer and use
it
drivers: thermal: tsens: Don't print error message on -EPROBE_DEFER
drivers: thermal: tsens: Add new operation to check if a sensor is
enabled
drivers: thermal: tsens: change data type for sensor IDs
drivers: thermal: tsens: Introduce IP-specific max_sensor count
drivers: thermal: tsens: simplify get_temp_tsens_v2 routine
drivers: thermal: tsens: Move get_temp_tsens_v2 to allow sharing
drivers: thermal: tsens: Common get_temp() learns to do ADC conversion
dt: thermal: tsens: Add bindings for qcs404
drivers: thermal: tsens: Add generic support for TSENS v1 IP
arm64: dts: qcom: qcs404: Add tsens controller
arm64: dts: qcom: qcs404: Add thermal zones for each sensor
drivers: thermal: tsens: Move calibration constants to header file

 .../bindings/thermal/qcom-tsens.txt           |  14 +
 arch/arm64/boot/dts/qcom/qcs404.dtsi          | 272 ++++++++++++++++
 drivers/thermal/qcom/Makefile                 |   4 +-
 drivers/thermal/qcom/tsens-8916.c             | 105 -------
 drivers/thermal/qcom/tsens-8960.c             |  84 ++---
 drivers/thermal/qcom/tsens-common.c           | 159 +++++++---
 .../qcom/{tsens-8974.c => tsens-v0_1.c}       | 166 +++++++++-
 drivers/thermal/qcom/tsens-v1.c               | 193 ++++++++++++
 drivers/thermal/qcom/tsens-v2.c               | 111 +++----
 drivers/thermal/qcom/tsens.c                  | 100 +++---
 drivers/thermal/qcom/tsens.h                  | 291 ++++++++++++++++--
 11 files changed, 1166 insertions(+), 333 deletions(-)
 delete mode 100644 drivers/thermal/qcom/tsens-8916.c
 rename drivers/thermal/qcom/{tsens-8974.c => tsens-v0_1.c} (56%)
 create mode 100644 drivers/thermal/qcom/tsens-v1.c
Signature · 1 line
2.17.1
#1 lore raw

PATCH v3 1/23 drivers: thermal: tsens: Document the data structures

Describe how the TSENS device and the various sensors connected to it are described in the driver

---
 drivers/thermal/qcom/tsens.h | 31 ++++++++++++++++++++++++++++---
 1 file changed, 28 insertions(+), 3 deletions(-)
drivers/thermal/qcom/tsens.h +28 -3
index 7b7feee5dc46..89318523c848 100644
@@ -14,6 +14,16 @@
 
 struct tsens_device;
 
+/**
+ * struct tsens_sensor - data for each sensor connected to the tsens device
+ * @tmdev: tsens device instance that this sensor is connected to
+ * @tzd: pointer to the thermal zone that this sensor is in
+ * @offset: offset of temperature adjustment curve
+ * @id: Sensor ID
+ * @hw_id: HW ID can be used in case of platform-specific IDs
+ * @slope: slope of temperature adjustment curve
+ * @status: 8960-specific variable to track 8960 and 8660 status register offset
+ */
 struct tsens_sensor {
 	struct tsens_device		*tmdev;
 	struct thermal_zone_device	*tzd;
@@ -55,8 +65,8 @@ enum reg_list {
 };
 
 /**
- * struct tsens_data - tsens instance specific data
- * @num_sensors: Max number of sensors supported by platform
+ * struct tsens_data - tsens platform data
+ * @num_sensors: Number of sensors supported by platform
  * @ops: operations the tsens instance supports
  * @hw_ids: Subset of sensors ids supported by platform, if not the first n
  * @reg_offsets: Register offsets for commonly used registers
@@ -68,12 +78,27 @@ struct tsens_data {
 	unsigned int		*hw_ids;
 };
 
-/* Registers to be saved/restored across a context loss */
+/**
+ * struct tsens_context - Registers to be saved/restored across a context loss
+ */
 struct tsens_context {
 	int	threshold;
 	int	control;
 };
 
+/**
+ * struct tsens_device - private data for each instance of the tsens IP
+ * @dev: pointer to struct device
+ * @num_sensors: number of sensors enabled on this device
+ * @tm_map: pointer to TM register address space
+ * @srot_map: pointer to SROT register address space
+ * @tm_offset: deal with old device trees that don't address TM and SROT
+ *             address space separately
+ * @reg_offsets: array of offsets to important regs for this version of IP
+ * @ctx: registers to be saved and restored during suspend/resume
+ * @ops: pointer to list of callbacks supported by this device
+ * @sensor: list of sensors attached to this device
+ */
 struct tsens_device {
 	struct device			*dev;
 	u32				num_sensors;
Signature · 1 line
2.17.1
#2 lore raw

PATCH v3 2/23 drivers: thermal: tsens: Rename tsens_data

In reply to Amit Kucheria

Rename to tsens_plat_data to denote that it is platform-data passed in at compile-time.

---
 drivers/thermal/qcom/tsens-8916.c | 2 +-
 drivers/thermal/qcom/tsens-8960.c | 2 +-
 drivers/thermal/qcom/tsens-8974.c | 2 +-
 drivers/thermal/qcom/tsens-v2.c   | 4 ++--
 drivers/thermal/qcom/tsens.c      | 2 +-
 drivers/thermal/qcom/tsens.h      | 8 ++++----
 6 files changed, 10 insertions(+), 10 deletions(-)
drivers/thermal/qcom/tsens-8916.c +1 -1
index c6dd620ac029..66edcfca1526 100644
@@ -97,7 +97,7 @@ static const struct tsens_ops ops_8916 = {
 	.get_temp	= get_temp_common,
 };
 
-const struct tsens_data data_8916 = {
+const struct tsens_plat_data data_8916 = {
 	.num_sensors	= 5,
 	.ops		= &ops_8916,
 	.reg_offsets	= { [SROT_CTRL_OFFSET] = 0x0 },
drivers/thermal/qcom/tsens-8960.c +1 -1
index 0f0adb302a7b..f3c3820e6e8e 100644
@@ -277,7 +277,7 @@ static const struct tsens_ops ops_8960 = {
 	.resume		= resume_8960,
 };
 
-const struct tsens_data data_8960 = {
+const struct tsens_plat_data data_8960 = {
 	.num_sensors	= 11,
 	.ops		= &ops_8960,
 };
drivers/thermal/qcom/tsens-8974.c +1 -1
index 3d3fda3d731b..5023f20afc14 100644
@@ -229,7 +229,7 @@ static const struct tsens_ops ops_8974 = {
 	.get_temp	= get_temp_common,
 };
 
-const struct tsens_data data_8974 = {
+const struct tsens_plat_data data_8974 = {
 	.num_sensors	= 11,
 	.ops		= &ops_8974,
 	.reg_offsets	= { [SROT_CTRL_OFFSET] = 0x0 },
drivers/thermal/qcom/tsens-v2.c +2 -2
index 381a212872bf..cc98a61e093b 100644
@@ -66,13 +66,13 @@ static const struct tsens_ops ops_generic_v2 = {
 	.get_temp	= get_temp_tsens_v2,
 };
 
-const struct tsens_data data_tsens_v2 = {
+const struct tsens_plat_data data_tsens_v2 = {
 	.ops            = &ops_generic_v2,
 	.reg_offsets	= { [SROT_CTRL_OFFSET] = 0x4 },
 };
 
 /* Kept around for backward compatibility with old msm8996.dtsi */
-const struct tsens_data data_8996 = {
+const struct tsens_plat_data data_8996 = {
 	.num_sensors	= 13,
 	.ops		= &ops_generic_v2,
 	.reg_offsets	= { [SROT_CTRL_OFFSET] = 0x4 },
drivers/thermal/qcom/tsens.c +1 -1
index f1ec9bbe4717..065ec2189bd3 100644
@@ -102,7 +102,7 @@ static int tsens_probe(struct platform_device *pdev)
 	struct device *dev;
 	struct device_node *np;
 	struct tsens_device *tmdev;
-	const struct tsens_data *data;
+	const struct tsens_plat_data *data;
 	const struct of_device_id *id;
 	u32 num_sensors;
 
drivers/thermal/qcom/tsens.h +4 -4
index 89318523c848..232376c690cc 100644
@@ -65,13 +65,13 @@ enum reg_list {
 };
 
 /**
- * struct tsens_data - tsens platform data
+ * struct tsens_plat_data - tsens compile-time platform data
  * @num_sensors: Number of sensors supported by platform
  * @ops: operations the tsens instance supports
  * @hw_ids: Subset of sensors ids supported by platform, if not the first n
  * @reg_offsets: Register offsets for commonly used registers
  */
-struct tsens_data {
+struct tsens_plat_data {
 	const u32		num_sensors;
 	const struct tsens_ops	*ops;
 	const u16		reg_offsets[REG_ARRAY_SIZE];
@@ -117,8 +117,8 @@ int init_common(struct tsens_device *);
 int get_temp_common(struct tsens_device *, int, int *);
 
 /* TSENS v1 targets */
-extern const struct tsens_data data_8916, data_8974, data_8960;
+extern const struct tsens_plat_data data_8916, data_8974, data_8960;
 /* TSENS v2 targets */
-extern const struct tsens_data data_8996, data_tsens_v2;
+extern const struct tsens_plat_data data_8996, data_tsens_v2;
 
 #endif /* __QCOM_TSENS_H__ */
Signature · 1 line
2.17.1
#3 lore raw

PATCH v3 3/23 drivers: thermal: tsens: Rename tsens_device

In reply to Amit Kucheria

Rename to tsens_priv to denote that it is private data for each tsens instance.

---
 drivers/thermal/qcom/tsens-8916.c   |  2 +-
 drivers/thermal/qcom/tsens-8960.c   | 14 +++++++-------
 drivers/thermal/qcom/tsens-8974.c   |  2 +-
 drivers/thermal/qcom/tsens-common.c |  6 +++---
 drivers/thermal/qcom/tsens-v2.c     |  2 +-
 drivers/thermal/qcom/tsens.c        | 14 +++++++-------
 drivers/thermal/qcom/tsens.h        | 30 ++++++++++++++---------------
 7 files changed, 35 insertions(+), 35 deletions(-)
drivers/thermal/qcom/tsens-8916.c +1 -1
index 66edcfca1526..7b8f83c9a033 100644
@@ -39,7 +39,7 @@
 #define CAL_SEL_MASK	0xe0000000
 #define CAL_SEL_SHIFT	29
 
-static int calibrate_8916(struct tsens_device *tmdev)
+static int calibrate_8916(struct tsens_priv *tmdev)
 {
 	int base0 = 0, base1 = 0, i;
 	u32 p1[5], p2[5];
drivers/thermal/qcom/tsens-8960.c +7 -7
index f3c3820e6e8e..7e340eea48da 100644
@@ -56,7 +56,7 @@
 #define TRDY_MASK		BIT(7)
 #define TIMEOUT_US		100
 
-static int suspend_8960(struct tsens_device *tmdev)
+static int suspend_8960(struct tsens_priv *tmdev)
 {
 	int ret;
 	unsigned int mask;
@@ -82,7 +82,7 @@ static int suspend_8960(struct tsens_device *tmdev)
 	return 0;
 }
 
-static int resume_8960(struct tsens_device *tmdev)
+static int resume_8960(struct tsens_priv *tmdev)
 {
 	int ret;
 	struct regmap *map = tmdev->tm_map;
@@ -112,7 +112,7 @@ static int resume_8960(struct tsens_device *tmdev)
 	return 0;
 }
 
-static int enable_8960(struct tsens_device *tmdev, int id)
+static int enable_8960(struct tsens_priv *tmdev, int id)
 {
 	int ret;
 	u32 reg, mask;
@@ -138,7 +138,7 @@ static int enable_8960(struct tsens_device *tmdev, int id)
 	return 0;
 }
 
-static void disable_8960(struct tsens_device *tmdev)
+static void disable_8960(struct tsens_priv *tmdev)
 {
 	int ret;
 	u32 reg_cntl;
@@ -162,7 +162,7 @@ static void disable_8960(struct tsens_device *tmdev)
 	regmap_write(tmdev->tm_map, CNTL_ADDR, reg_cntl);
 }
 
-static int init_8960(struct tsens_device *tmdev)
+static int init_8960(struct tsens_priv *tmdev)
 {
 	int ret, i;
 	u32 reg_cntl;
@@ -212,7 +212,7 @@ static int init_8960(struct tsens_device *tmdev)
 	return 0;
 }
 
-static int calibrate_8960(struct tsens_device *tmdev)
+static int calibrate_8960(struct tsens_priv *tmdev)
 {
 	int i;
 	char *data;
@@ -243,7 +243,7 @@ static inline int code_to_mdegC(u32 adc_code, const struct tsens_sensor *s)
 	return adc_code * slope + offset;
 }
 
-static int get_temp_8960(struct tsens_device *tmdev, int id, int *temp)
+static int get_temp_8960(struct tsens_priv *tmdev, int id, int *temp)
 {
 	int ret;
 	u32 code, trdy;
drivers/thermal/qcom/tsens-8974.c +1 -1
index 5023f20afc14..f983f98f2176 100644
@@ -91,7 +91,7 @@
 
 #define BIT_APPEND		0x3
 
-static int calibrate_8974(struct tsens_device *tmdev)
+static int calibrate_8974(struct tsens_priv *tmdev)
 {
 	int base1 = 0, base2 = 0, i;
 	u32 p1[11], p2[11];
drivers/thermal/qcom/tsens-common.c +3 -3
index f80c73f11740..46f8c68c70f5 100644
@@ -46,7 +46,7 @@ char *qfprom_read(struct device *dev, const char *cname)
  * and offset values are derived from tz->tzp->slope and tz->tzp->offset
  * resp.
  */
-void compute_intercept_slope(struct tsens_device *tmdev, u32 *p1,
+void compute_intercept_slope(struct tsens_priv *tmdev, u32 *p1,
 			     u32 *p2, u32 mode)
 {
 	int i;
@@ -95,7 +95,7 @@ static inline int code_to_degc(u32 adc_code, const struct tsens_sensor *s)
 	return degc;
 }
 
-int get_temp_common(struct tsens_device *tmdev, int id, int *temp)
+int get_temp_common(struct tsens_priv *tmdev, int id, int *temp)
 {
 	struct tsens_sensor *s = &tmdev->sensor[id];
 	u32 code;
@@ -127,7 +127,7 @@ static const struct regmap_config tsens_srot_config = {
 	.reg_stride	= 4,
 };
 
-int __init init_common(struct tsens_device *tmdev)
+int __init init_common(struct tsens_priv *tmdev)
 {
 	void __iomem *tm_base, *srot_base;
 	struct resource *res;
drivers/thermal/qcom/tsens-v2.c +1 -1
index cc98a61e093b..d812fd3f4567 100644
@@ -12,7 +12,7 @@
 #define LAST_TEMP_MASK		0xfff
 #define STATUS_VALID_BIT	BIT(21)
 
-static int get_temp_tsens_v2(struct tsens_device *tmdev, int id, int *temp)
+static int get_temp_tsens_v2(struct tsens_priv *tmdev, int id, int *temp)
 {
 	struct tsens_sensor *s = &tmdev->sensor[id];
 	u32 code;
drivers/thermal/qcom/tsens.c +7 -7
index 065ec2189bd3..074fbb4d70f2 100644
@@ -15,7 +15,7 @@
 static int tsens_get_temp(void *data, int *temp)
 {
 	const struct tsens_sensor *s = data;
-	struct tsens_device *tmdev = s->tmdev;
+	struct tsens_priv *tmdev = s->tmdev;
 
 	return tmdev->ops->get_temp(tmdev, s->id, temp);
 }
@@ -23,7 +23,7 @@ static int tsens_get_temp(void *data, int *temp)
 static int tsens_get_trend(void *p, int trip, enum thermal_trend *trend)
 {
 	const struct tsens_sensor *s = p;
-	struct tsens_device *tmdev = s->tmdev;
+	struct tsens_priv *tmdev = s->tmdev;
 
 	if (tmdev->ops->get_trend)
 		return  tmdev->ops->get_trend(tmdev, s->id, trend);
@@ -33,7 +33,7 @@ static int tsens_get_trend(void *p, int trip, enum thermal_trend *trend)
 
 static int  __maybe_unused tsens_suspend(struct device *dev)
 {
-	struct tsens_device *tmdev = dev_get_drvdata(dev);
+	struct tsens_priv *tmdev = dev_get_drvdata(dev);
 
 	if (tmdev->ops && tmdev->ops->suspend)
 		return tmdev->ops->suspend(tmdev);
@@ -43,7 +43,7 @@ static int  __maybe_unused tsens_suspend(struct device *dev)
 
 static int __maybe_unused tsens_resume(struct device *dev)
 {
-	struct tsens_device *tmdev = dev_get_drvdata(dev);
+	struct tsens_priv *tmdev = dev_get_drvdata(dev);
 
 	if (tmdev->ops && tmdev->ops->resume)
 		return tmdev->ops->resume(tmdev);
@@ -76,7 +76,7 @@ static const struct thermal_zone_of_device_ops tsens_of_ops = {
 	.get_trend = tsens_get_trend,
 };
 
-static int tsens_register(struct tsens_device *tmdev)
+static int tsens_register(struct tsens_priv *tmdev)
 {
 	int i;
 	struct thermal_zone_device *tzd;
@@ -101,7 +101,7 @@ static int tsens_probe(struct platform_device *pdev)
 	int ret, i;
 	struct device *dev;
 	struct device_node *np;
-	struct tsens_device *tmdev;
+	struct tsens_priv *tmdev;
 	const struct tsens_plat_data *data;
 	const struct of_device_id *id;
 	u32 num_sensors;
@@ -174,7 +174,7 @@ static int tsens_probe(struct platform_device *pdev)
 
 static int tsens_remove(struct platform_device *pdev)
 {
-	struct tsens_device *tmdev = platform_get_drvdata(pdev);
+	struct tsens_priv *tmdev = platform_get_drvdata(pdev);
 
 	if (tmdev->ops->disable)
 		tmdev->ops->disable(tmdev);
drivers/thermal/qcom/tsens.h +15 -15
index 232376c690cc..936bdc7b1bc2 100644
@@ -12,7 +12,7 @@
 
 #include <linux/thermal.h>
 
-struct tsens_device;
+struct tsens_priv;
 
 /**
  * struct tsens_sensor - data for each sensor connected to the tsens device
@@ -25,7 +25,7 @@ struct tsens_device;
  * @status: 8960-specific variable to track 8960 and 8660 status register offset
  */
 struct tsens_sensor {
-	struct tsens_device		*tmdev;
+	struct tsens_priv		*tmdev;
 	struct thermal_zone_device	*tzd;
 	int				offset;
 	int				id;
@@ -47,15 +47,15 @@ struct tsens_sensor {
  */
 struct tsens_ops {
 	/* mandatory callbacks */
-	int (*init)(struct tsens_device *);
-	int (*calibrate)(struct tsens_device *);
-	int (*get_temp)(struct tsens_device *, int, int *);
+	int (*init)(struct tsens_priv *);
+	int (*calibrate)(struct tsens_priv *);
+	int (*get_temp)(struct tsens_priv *, int, int *);
 	/* optional callbacks */
-	int (*enable)(struct tsens_device *, int);
-	void (*disable)(struct tsens_device *);
-	int (*suspend)(struct tsens_device *);
-	int (*resume)(struct tsens_device *);
-	int (*get_trend)(struct tsens_device *, int, enum thermal_trend *);
+	int (*enable)(struct tsens_priv *, int);
+	void (*disable)(struct tsens_priv *);
+	int (*suspend)(struct tsens_priv *);
+	int (*resume)(struct tsens_priv *);
+	int (*get_trend)(struct tsens_priv *, int, enum thermal_trend *);
 };
 
 enum reg_list {
@@ -87,7 +87,7 @@ struct tsens_context {
 };
 
 /**
- * struct tsens_device - private data for each instance of the tsens IP
+ * struct tsens_priv - private data for each instance of the tsens IP
  * @dev: pointer to struct device
  * @num_sensors: number of sensors enabled on this device
  * @tm_map: pointer to TM register address space
@@ -99,7 +99,7 @@ struct tsens_context {
  * @ops: pointer to list of callbacks supported by this device
  * @sensor: list of sensors attached to this device
  */
-struct tsens_device {
+struct tsens_priv {
 	struct device			*dev;
 	u32				num_sensors;
 	struct regmap			*tm_map;
@@ -112,9 +112,9 @@ struct tsens_device {
 };
 
 char *qfprom_read(struct device *, const char *);
-void compute_intercept_slope(struct tsens_device *, u32 *, u32 *, u32);
-int init_common(struct tsens_device *);
-int get_temp_common(struct tsens_device *, int, int *);
+void compute_intercept_slope(struct tsens_priv *, u32 *, u32 *, u32);
+int init_common(struct tsens_priv *);
+int get_temp_common(struct tsens_priv *, int, int *);
 
 /* TSENS v1 targets */
 extern const struct tsens_plat_data data_8916, data_8974, data_8960;
Signature · 1 line
2.17.1
#4 lore raw

PATCH v3 4/23 drivers: thermal: tsens: Rename variable tmdev

In reply to Amit Kucheria

tmdev seems to imply that this is a device pointer when in fact it is just private platform data for each tsens device. Rename it to priv improve code readability.

---
 drivers/thermal/qcom/tsens-8916.c   | 16 +++---
 drivers/thermal/qcom/tsens-8960.c   | 82 ++++++++++++++---------------
 drivers/thermal/qcom/tsens-8974.c   | 16 +++---
 drivers/thermal/qcom/tsens-common.c | 53 +++++++++----------
 drivers/thermal/qcom/tsens-v2.c     | 12 ++---
 drivers/thermal/qcom/tsens.c        | 80 ++++++++++++++--------------
 drivers/thermal/qcom/tsens.h        |  4 +-
 7 files changed, 131 insertions(+), 132 deletions(-)
drivers/thermal/qcom/tsens-8916.c +8 -8
index 7b8f83c9a033..d4ad4082c800 100644
@@ -39,23 +39,23 @@
 #define CAL_SEL_MASK	0xe0000000
 #define CAL_SEL_SHIFT	29
 
-static int calibrate_8916(struct tsens_priv *tmdev)
+static int calibrate_8916(struct tsens_priv *priv)
 {
 	int base0 = 0, base1 = 0, i;
 	u32 p1[5], p2[5];
 	int mode = 0;
 	u32 *qfprom_cdata, *qfprom_csel;
 
-	qfprom_cdata = (u32 *)qfprom_read(tmdev->dev, "calib");
+	qfprom_cdata = (u32 *)qfprom_read(priv->dev, "calib");
 	if (IS_ERR(qfprom_cdata))
 		return PTR_ERR(qfprom_cdata);
 
-	qfprom_csel = (u32 *)qfprom_read(tmdev->dev, "calib_sel");
+	qfprom_csel = (u32 *)qfprom_read(priv->dev, "calib_sel");
 	if (IS_ERR(qfprom_csel))
 		return PTR_ERR(qfprom_csel);
 
 	mode = (qfprom_csel[0] & CAL_SEL_MASK) >> CAL_SEL_SHIFT;
-	dev_dbg(tmdev->dev, "calibration mode is %d\n", mode);
+	dev_dbg(priv->dev, "calibration mode is %d\n", mode);
 
 	switch (mode) {
 	case TWO_PT_CALIB:
@@ -65,7 +65,7 @@ static int calibrate_8916(struct tsens_priv *tmdev)
 		p2[2] = (qfprom_cdata[1] & S2_P2_MASK) >> S2_P2_SHIFT;
 		p2[3] = (qfprom_cdata[1] & S3_P2_MASK) >> S3_P2_SHIFT;
 		p2[4] = (qfprom_cdata[1] & S4_P2_MASK) >> S4_P2_SHIFT;
-		for (i = 0; i < tmdev->num_sensors; i++)
+		for (i = 0; i < priv->num_sensors; i++)
 			p2[i] = ((base1 + p2[i]) << 3);
 		/* Fall through */
 	case ONE_PT_CALIB2:
@@ -75,18 +75,18 @@ static int calibrate_8916(struct tsens_priv *tmdev)
 		p1[2] = (qfprom_cdata[0] & S2_P1_MASK) >> S2_P1_SHIFT;
 		p1[3] = (qfprom_cdata[1] & S3_P1_MASK) >> S3_P1_SHIFT;
 		p1[4] = (qfprom_cdata[1] & S4_P1_MASK) >> S4_P1_SHIFT;
-		for (i = 0; i < tmdev->num_sensors; i++)
+		for (i = 0; i < priv->num_sensors; i++)
 			p1[i] = (((base0) + p1[i]) << 3);
 		break;
 	default:
-		for (i = 0; i < tmdev->num_sensors; i++) {
+		for (i = 0; i < priv->num_sensors; i++) {
 			p1[i] = 500;
 			p2[i] = 780;
 		}
 		break;
 	}
 
-	compute_intercept_slope(tmdev, p1, p2, mode);
+	compute_intercept_slope(priv, p1, p2, mode);
 
 	return 0;
 }
drivers/thermal/qcom/tsens-8960.c +41 -41

224 lines not on this page · raw message

drivers/thermal/qcom/tsens-8974.c +8 -8
index f983f98f2176..303157fd00be 100644
@@ -91,7 +91,7 @@
 
 #define BIT_APPEND		0x3
 
-static int calibrate_8974(struct tsens_priv *tmdev)
+static int calibrate_8974(struct tsens_priv *priv)
 {
 	int base1 = 0, base2 = 0, i;
 	u32 p1[11], p2[11];
@@ -99,11 +99,11 @@ static int calibrate_8974(struct tsens_priv *tmdev)
 	u32 *calib, *bkp;
 	u32 calib_redun_sel;
 
-	calib = (u32 *)qfprom_read(tmdev->dev, "calib");
+	calib = (u32 *)qfprom_read(priv->dev, "calib");
 	if (IS_ERR(calib))
 		return PTR_ERR(calib);
 
-	bkp = (u32 *)qfprom_read(tmdev->dev, "calib_backup");
+	bkp = (u32 *)qfprom_read(priv->dev, "calib_backup");
 	if (IS_ERR(bkp))
 		return PTR_ERR(bkp);
 
@@ -184,25 +184,25 @@ static int calibrate_8974(struct tsens_priv *tmdev)
 
 	switch (mode) {
 	case ONE_PT_CALIB:
-		for (i = 0; i < tmdev->num_sensors; i++)
+		for (i = 0; i < priv->num_sensors; i++)
 			p1[i] += (base1 << 2) | BIT_APPEND;
 		break;
 	case TWO_PT_CALIB:
-		for (i = 0; i < tmdev->num_sensors; i++) {
+		for (i = 0; i < priv->num_sensors; i++) {
 			p2[i] += base2;
 			p2[i] <<= 2;
 			p2[i] |= BIT_APPEND;
 		}
 		/* Fall through */
 	case ONE_PT_CALIB2:
-		for (i = 0; i < tmdev->num_sensors; i++) {
+		for (i = 0; i < priv->num_sensors; i++) {
 			p1[i] += base1;
 			p1[i] <<= 2;
 			p1[i] |= BIT_APPEND;
 		}
 		break;
 	default:
-		for (i = 0; i < tmdev->num_sensors; i++)
+		for (i = 0; i < priv->num_sensors; i++)
 			p2[i] = 780;
 		p1[0] = 502;
 		p1[1] = 509;
@@ -218,7 +218,7 @@ static int calibrate_8974(struct tsens_priv *tmdev)
 		break;
 	}
 
-	compute_intercept_slope(tmdev, p1, p2, mode);
+	compute_intercept_slope(priv, p1, p2, mode);
 
 	return 0;
 }
drivers/thermal/qcom/tsens-common.c +26 -27

127 lines not on this page · raw message

drivers/thermal/qcom/tsens-v2.c +6 -6
index d812fd3f4567..8b700772d903 100644
@@ -12,16 +12,16 @@
 #define LAST_TEMP_MASK		0xfff
 #define STATUS_VALID_BIT	BIT(21)
 
-static int get_temp_tsens_v2(struct tsens_priv *tmdev, int id, int *temp)
+static int get_temp_tsens_v2(struct tsens_priv *priv, int id, int *temp)
 {
-	struct tsens_sensor *s = &tmdev->sensor[id];
+	struct tsens_sensor *s = &priv->sensor[id];
 	u32 code;
 	unsigned int status_reg;
 	u32 last_temp = 0, last_temp2 = 0, last_temp3 = 0;
 	int ret;
 
-	status_reg = tmdev->tm_offset + STATUS_OFFSET + s->hw_id * 4;
-	ret = regmap_read(tmdev->tm_map, status_reg, &code);
+	status_reg = priv->tm_offset + STATUS_OFFSET + s->hw_id * 4;
+	ret = regmap_read(priv->tm_map, status_reg, &code);
 	if (ret)
 		return ret;
 	last_temp = code & LAST_TEMP_MASK;
@@ -29,7 +29,7 @@ static int get_temp_tsens_v2(struct tsens_priv *tmdev, int id, int *temp)
 		goto done;
 
 	/* Try a second time */
-	ret = regmap_read(tmdev->tm_map, status_reg, &code);
+	ret = regmap_read(priv->tm_map, status_reg, &code);
 	if (ret)
 		return ret;
 	if (code & STATUS_VALID_BIT) {
@@ -40,7 +40,7 @@ static int get_temp_tsens_v2(struct tsens_priv *tmdev, int id, int *temp)
 	}
 
 	/* Try a third/last time */
-	ret = regmap_read(tmdev->tm_map, status_reg, &code);
+	ret = regmap_read(priv->tm_map, status_reg, &code);
 	if (ret)
 		return ret;
 	if (code & STATUS_VALID_BIT) {
drivers/thermal/qcom/tsens.c +40 -40

162 lines not on this page · raw message

drivers/thermal/qcom/tsens.h +2 -2
index 936bdc7b1bc2..61ca2905ee7a 100644
@@ -16,7 +16,7 @@ struct tsens_priv;
 
 /**
  * struct tsens_sensor - data for each sensor connected to the tsens device
- * @tmdev: tsens device instance that this sensor is connected to
+ * @priv: tsens device instance that this sensor is connected to
  * @tzd: pointer to the thermal zone that this sensor is in
  * @offset: offset of temperature adjustment curve
  * @id: Sensor ID
@@ -25,7 +25,7 @@ struct tsens_priv;
  * @status: 8960-specific variable to track 8960 and 8660 status register offset
  */
 struct tsens_sensor {
-	struct tsens_priv		*tmdev;
+	struct tsens_priv		*priv;
 	struct thermal_zone_device	*tzd;
 	int				offset;
 	int				id;
Signature · 1 line
2.17.1
#5 lore raw

PATCH v3 5/23 drivers: thermal: tsens: Use consistent names for variables

In reply to Amit Kucheria

tsens_get_temp() uses the name 'data' for the void pointer, use the same in tsens_get_trend() for consistency.

Remove a stray space while we're at it.

---
 drivers/thermal/qcom/tsens.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/thermal/qcom/tsens.c +3 -3
index 4582d2b30e94..0b5be08d515f 100644
@@ -20,13 +20,13 @@ static int tsens_get_temp(void *data, int *temp)
 	return priv->ops->get_temp(priv, s->id, temp);
 }
 
-static int tsens_get_trend(void *p, int trip, enum thermal_trend *trend)
+static int tsens_get_trend(void *data, int trip, enum thermal_trend *trend)
 {
-	const struct tsens_sensor *s = p;
+	const struct tsens_sensor *s = data;
 	struct tsens_priv *priv = s->priv;
 
 	if (priv->ops->get_trend)
-		return  priv->ops->get_trend(priv, s->id, trend);
+		return priv->ops->get_trend(priv, s->id, trend);
 
 	return -ENOTSUPP;
 }
Signature · 1 line
2.17.1
#6 lore raw

PATCH v3 6/23 drivers: thermal: tsens: Function prototypes should have argument names

In reply to Amit Kucheria

check_patch complains a lot as follows:

WARNING: function definition argument 'struct tsens_priv *' should also have an identifier name
+ int (*init)(struct tsens_priv *);

Fix it.

---
 drivers/thermal/qcom/tsens.h | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)
drivers/thermal/qcom/tsens.h +12 -12
index 61ca2905ee7a..4d6a406f8dca 100644
@@ -47,15 +47,15 @@ struct tsens_sensor {
  */
 struct tsens_ops {
 	/* mandatory callbacks */
-	int (*init)(struct tsens_priv *);
-	int (*calibrate)(struct tsens_priv *);
-	int (*get_temp)(struct tsens_priv *, int, int *);
+	int (*init)(struct tsens_priv *priv);
+	int (*calibrate)(struct tsens_priv *priv);
+	int (*get_temp)(struct tsens_priv *priv, int i, int *temp);
 	/* optional callbacks */
-	int (*enable)(struct tsens_priv *, int);
-	void (*disable)(struct tsens_priv *);
-	int (*suspend)(struct tsens_priv *);
-	int (*resume)(struct tsens_priv *);
-	int (*get_trend)(struct tsens_priv *, int, enum thermal_trend *);
+	int (*enable)(struct tsens_priv *priv, int i);
+	void (*disable)(struct tsens_priv *priv);
+	int (*suspend)(struct tsens_priv *priv);
+	int (*resume)(struct tsens_priv *priv);
+	int (*get_trend)(struct tsens_priv *priv, int i, enum thermal_trend *trend);
 };
 
 enum reg_list {
@@ -111,10 +111,10 @@ struct tsens_priv {
 	struct tsens_sensor		sensor[0];
 };
 
-char *qfprom_read(struct device *, const char *);
-void compute_intercept_slope(struct tsens_priv *, u32 *, u32 *, u32);
-int init_common(struct tsens_priv *);
-int get_temp_common(struct tsens_priv *, int, int *);
+char *qfprom_read(struct device *dev, const char *cname);
+void compute_intercept_slope(struct tsens_priv *priv, u32 *pt1, u32 *pt2, u32 mode);
+int init_common(struct tsens_priv *priv);
+int get_temp_common(struct tsens_priv *priv, int i, int *temp);
 
 /* TSENS v1 targets */
 extern const struct tsens_plat_data data_8916, data_8974, data_8960;
Signature · 1 line
2.17.1
#7 lore raw

PATCH v3 7/23 drivers: thermal: tsens: Rename tsens-8916 to prepare to merge with tsens-8974

In reply to Amit Kucheria

8916 and 8974 use v0.1.0 of the TSENS IP. Rename tsens-8916 to prepare it for merging with tsens-8974 in a later commit.

---
 drivers/thermal/qcom/Makefile                       | 2 +-
 drivers/thermal/qcom/{tsens-8916.c => tsens-v0_1.c} | 0
 2 files changed, 1 insertion(+), 1 deletion(-)
 rename drivers/thermal/qcom/{tsens-8916.c => tsens-v0_1.c} (100%)
drivers/thermal/qcom/Makefile +1 -1
index 717a08600bb5..1f2fafd43dff 100644
@@ -1,3 +1,3 @@
 obj-$(CONFIG_QCOM_TSENS)	+= qcom_tsens.o
-qcom_tsens-y			+= tsens.o tsens-common.o tsens-8916.o tsens-8974.o tsens-8960.o tsens-v2.o
+qcom_tsens-y			+= tsens.o tsens-common.o tsens-v0_1.o tsens-8974.o tsens-8960.o tsens-v2.o
 obj-$(CONFIG_QCOM_SPMI_TEMP_ALARM)	+= qcom-spmi-temp-alarm.o
drivers/thermal/qcom/tsens-v0_1.c renamed from drivers/thermal/qcom/tsens-8916.c +0 -0
similarity index 100%
rename from drivers/thermal/qcom/tsens-8916.c
rename to drivers/thermal/qcom/tsens-v0_1.c
Signature · 1 line
2.17.1
#8 lore raw

PATCH v3 8/23 drivers: thermal: tsens: Rename constants to prepare to merge with tsens-8974

In reply to Amit Kucheria

Some #defines in tsens-v_0_1.c clash with those in tsens-8974.c. Prefix them with 8916 to avoid the clash so we can merge the two files.

---
 drivers/thermal/qcom/tsens-v0_1.c | 88 +++++++++++++++----------------
 1 file changed, 44 insertions(+), 44 deletions(-)
drivers/thermal/qcom/tsens-v0_1.c +44 -44
index d4ad4082c800..30909594b1cf 100644
@@ -7,37 +7,37 @@
 #include "tsens.h"
 
 /* eeprom layout data for 8916 */
-#define BASE0_MASK	0x0000007f
-#define BASE1_MASK	0xfe000000
-#define BASE0_SHIFT	0
-#define BASE1_SHIFT	25
-
-#define S0_P1_MASK	0x00000f80
-#define S1_P1_MASK	0x003e0000
-#define S2_P1_MASK	0xf8000000
-#define S3_P1_MASK	0x000003e0
-#define S4_P1_MASK	0x000f8000
-
-#define S0_P2_MASK	0x0001f000
-#define S1_P2_MASK	0x07c00000
-#define S2_P2_MASK	0x0000001f
-#define S3_P2_MASK	0x00007c00
-#define S4_P2_MASK	0x01f00000
-
-#define S0_P1_SHIFT	7
-#define S1_P1_SHIFT	17
-#define S2_P1_SHIFT	27
-#define S3_P1_SHIFT	5
-#define S4_P1_SHIFT	15
-
-#define S0_P2_SHIFT	12
-#define S1_P2_SHIFT	22
-#define S2_P2_SHIFT	0
-#define S3_P2_SHIFT	10
-#define S4_P2_SHIFT	20
-
-#define CAL_SEL_MASK	0xe0000000
-#define CAL_SEL_SHIFT	29
+#define MSM8916_BASE0_MASK	0x0000007f
+#define MSM8916_BASE1_MASK	0xfe000000
+#define MSM8916_BASE0_SHIFT	0
+#define MSM8916_BASE1_SHIFT	25
+
+#define MSM8916_S0_P1_MASK	0x00000f80
+#define MSM8916_S1_P1_MASK	0x003e0000
+#define MSM8916_S2_P1_MASK	0xf8000000
+#define MSM8916_S3_P1_MASK	0x000003e0
+#define MSM8916_S4_P1_MASK	0x000f8000
+
+#define MSM8916_S0_P2_MASK	0x0001f000
+#define MSM8916_S1_P2_MASK	0x07c00000
+#define MSM8916_S2_P2_MASK	0x0000001f
+#define MSM8916_S3_P2_MASK	0x00007c00
+#define MSM8916_S4_P2_MASK	0x01f00000
+
+#define MSM8916_S0_P1_SHIFT	7
+#define MSM8916_S1_P1_SHIFT	17
+#define MSM8916_S2_P1_SHIFT	27
+#define MSM8916_S3_P1_SHIFT	5
+#define MSM8916_S4_P1_SHIFT	15
+
+#define MSM8916_S0_P2_SHIFT	12
+#define MSM8916_S1_P2_SHIFT	22
+#define MSM8916_S2_P2_SHIFT	0
+#define MSM8916_S3_P2_SHIFT	10
+#define MSM8916_S4_P2_SHIFT	20
+
+#define MSM8916_CAL_SEL_MASK	0xe0000000
+#define MSM8916_CAL_SEL_SHIFT	29
 
 static int calibrate_8916(struct tsens_priv *priv)
 {
@@ -54,27 +54,27 @@ static int calibrate_8916(struct tsens_priv *priv)
 	if (IS_ERR(qfprom_csel))
 		return PTR_ERR(qfprom_csel);
 
-	mode = (qfprom_csel[0] & CAL_SEL_MASK) >> CAL_SEL_SHIFT;
+	mode = (qfprom_csel[0] & MSM8916_CAL_SEL_MASK) >> MSM8916_CAL_SEL_SHIFT;
 	dev_dbg(priv->dev, "calibration mode is %d\n", mode);
 
 	switch (mode) {
 	case TWO_PT_CALIB:
-		base1 = (qfprom_cdata[1] & BASE1_MASK) >> BASE1_SHIFT;
-		p2[0] = (qfprom_cdata[0] & S0_P2_MASK) >> S0_P2_SHIFT;
-		p2[1] = (qfprom_cdata[0] & S1_P2_MASK) >> S1_P2_SHIFT;
-		p2[2] = (qfprom_cdata[1] & S2_P2_MASK) >> S2_P2_SHIFT;
-		p2[3] = (qfprom_cdata[1] & S3_P2_MASK) >> S3_P2_SHIFT;
-		p2[4] = (qfprom_cdata[1] & S4_P2_MASK) >> S4_P2_SHIFT;
+		base1 = (qfprom_cdata[1] & MSM8916_BASE1_MASK) >> MSM8916_BASE1_SHIFT;
+		p2[0] = (qfprom_cdata[0] & MSM8916_S0_P2_MASK) >> MSM8916_S0_P2_SHIFT;
+		p2[1] = (qfprom_cdata[0] & MSM8916_S1_P2_MASK) >> MSM8916_S1_P2_SHIFT;
+		p2[2] = (qfprom_cdata[1] & MSM8916_S2_P2_MASK) >> MSM8916_S2_P2_SHIFT;
+		p2[3] = (qfprom_cdata[1] & MSM8916_S3_P2_MASK) >> MSM8916_S3_P2_SHIFT;
+		p2[4] = (qfprom_cdata[1] & MSM8916_S4_P2_MASK) >> MSM8916_S4_P2_SHIFT;
 		for (i = 0; i < priv->num_sensors; i++)
 			p2[i] = ((base1 + p2[i]) << 3);
 		/* Fall through */
 	case ONE_PT_CALIB2:
-		base0 = (qfprom_cdata[0] & BASE0_MASK);
-		p1[0] = (qfprom_cdata[0] & S0_P1_MASK) >> S0_P1_SHIFT;
-		p1[1] = (qfprom_cdata[0] & S1_P1_MASK) >> S1_P1_SHIFT;
-		p1[2] = (qfprom_cdata[0] & S2_P1_MASK) >> S2_P1_SHIFT;
-		p1[3] = (qfprom_cdata[1] & S3_P1_MASK) >> S3_P1_SHIFT;
-		p1[4] = (qfprom_cdata[1] & S4_P1_MASK) >> S4_P1_SHIFT;
+		base0 = (qfprom_cdata[0] & MSM8916_BASE0_MASK);
+		p1[0] = (qfprom_cdata[0] & MSM8916_S0_P1_MASK) >> MSM8916_S0_P1_SHIFT;
+		p1[1] = (qfprom_cdata[0] & MSM8916_S1_P1_MASK) >> MSM8916_S1_P1_SHIFT;
+		p1[2] = (qfprom_cdata[0] & MSM8916_S2_P1_MASK) >> MSM8916_S2_P1_SHIFT;
+		p1[3] = (qfprom_cdata[1] & MSM8916_S3_P1_MASK) >> MSM8916_S3_P1_SHIFT;
+		p1[4] = (qfprom_cdata[1] & MSM8916_S4_P1_MASK) >> MSM8916_S4_P1_SHIFT;
 		for (i = 0; i < priv->num_sensors; i++)
 			p1[i] = (((base0) + p1[i]) << 3);
 		break;
Signature · 1 line
2.17.1
#9 lore raw

PATCH v3 9/23 drivers: thermal: tsens: Merge tsens-8974 into tsens-v0_1

In reply to Amit Kucheria

8974 and 8916 have the same version of the TSENS IP. Merge the files to allow for better code reuse.

---
 drivers/thermal/qcom/Makefile     |   2 +-
 drivers/thermal/qcom/tsens-8974.c | 236 ------------------------------
 drivers/thermal/qcom/tsens-v0_1.c | 229 +++++++++++++++++++++++++++++
 drivers/thermal/qcom/tsens.h      |   8 +-
 4 files changed, 236 insertions(+), 239 deletions(-)
 delete mode 100644 drivers/thermal/qcom/tsens-8974.c
drivers/thermal/qcom/Makefile +1 -1
index 1f2fafd43dff..7fa3cadce760 100644
@@ -1,3 +1,3 @@
 obj-$(CONFIG_QCOM_TSENS)	+= qcom_tsens.o
-qcom_tsens-y			+= tsens.o tsens-common.o tsens-v0_1.o tsens-8974.o tsens-8960.o tsens-v2.o
+qcom_tsens-y			+= tsens.o tsens-common.o tsens-v0_1.o tsens-8960.o tsens-v2.o
 obj-$(CONFIG_QCOM_SPMI_TEMP_ALARM)	+= qcom-spmi-temp-alarm.o
drivers/thermal/qcom/tsens-8974.c deleted +0 -236

236 lines not on this page · raw message

drivers/thermal/qcom/tsens-v0_1.c +229 -0

244 lines not on this page · raw message

drivers/thermal/qcom/tsens.h +6 -2
index 4d6a406f8dca..27b8f74829d9 100644
@@ -116,8 +116,12 @@ void compute_intercept_slope(struct tsens_priv *priv, u32 *pt1, u32 *pt2, u32 mo
 int init_common(struct tsens_priv *priv);
 int get_temp_common(struct tsens_priv *priv, int i, int *temp);
 
-/* TSENS v1 targets */
-extern const struct tsens_plat_data data_8916, data_8974, data_8960;
+/* TSENS target */
+extern const struct tsens_plat_data data_8960;
+
+/* TSENS v0.1 targets */
+extern const struct tsens_plat_data data_8916, data_8974;
+
 /* TSENS v2 targets */
 extern const struct tsens_plat_data data_8996, data_tsens_v2;
 
Signature · 1 line
2.17.1
#10 lore raw

PATCH v3 10/23 drivers: thermal: tsens: Introduce reg_fields to deal with register description

In reply to Amit Kucheria

As we add support for newer versions of the TSENS IP, the current approach isn't scaling because registers and bitfields get moved around, requiring platform-specific hacks in the code. By moving to regmap, we can hide the register level differences away from the code.

Define a common set of registers and bit-fields that we care about across the various tsens IP versions.

---
 drivers/thermal/qcom/tsens-common.c |  62 +++++----
 drivers/thermal/qcom/tsens-v0_1.c   |  50 ++++++-
 drivers/thermal/qcom/tsens-v2.c     | 105 ++++++++++----
 drivers/thermal/qcom/tsens.c        |   5 +-
 drivers/thermal/qcom/tsens.h        | 206 +++++++++++++++++++++++++++-
 5 files changed, 370 insertions(+), 58 deletions(-)
drivers/thermal/qcom/tsens-common.c +39 -23
index f0ef4e3cf7f9..0f9deec2517a 100644
@@ -12,13 +12,6 @@
 #include <linux/regmap.h>
 #include "tsens.h"
 
-/* SROT */
-#define TSENS_EN		BIT(0)
-
-/* TM */
-#define STATUS_OFFSET		0x30
-#define SN_ADDR_OFFSET		0x4
-#define SN_ST_TEMP_MASK		0x3ff
 #define CAL_DEGC_PT1		30
 #define CAL_DEGC_PT2		120
 #define SLOPE_FACTOR		1000
@@ -95,18 +88,14 @@ static inline int code_to_degc(u32 adc_code, const struct tsens_sensor *s)
 	return degc;
 }
 
-int get_temp_common(struct tsens_priv *priv, int id, int *temp)
+int get_temp_common(struct tsens_priv *priv, int i, int *temp)
 {
-	struct tsens_sensor *s = &priv->sensor[id];
-	u32 code;
-	unsigned int status_reg;
+	struct tsens_sensor *s = &priv->sensor[i];
 	int last_temp = 0, ret;
 
-	status_reg = priv->tm_offset + STATUS_OFFSET + s->hw_id * SN_ADDR_OFFSET;
-	ret = regmap_read(priv->tm_map, status_reg, &code);
+	ret = regmap_field_read(priv->rf[LAST_TEMP_0 + s->hw_id], &last_temp);
 	if (ret)
 		return ret;
-	last_temp = code & SN_ST_TEMP_MASK;
 
 	*temp = code_to_degc(last_temp, s) * 1000;
 
@@ -131,10 +120,9 @@ int __init init_common(struct tsens_priv *priv)
 {
 	void __iomem *tm_base, *srot_base;
 	struct resource *res;
-	u32 code;
-	int ret;
+	u32 enabled;
+	int ret, i, j;
 	struct platform_device *op = of_find_device_by_node(priv->dev->of_node);
-	u16 ctrl_offset = priv->reg_offsets[SROT_CTRL_OFFSET];
 
 	if (!op)
 		return -EINVAL;
@@ -173,13 +161,41 @@ int __init init_common(struct tsens_priv *priv)
 		goto err_put_device;
 	}
 
-	if (priv->srot_map) {
-		ret = regmap_read(priv->srot_map, ctrl_offset, &code);
-		if (ret)
+	priv->rf[TSENS_EN] = devm_regmap_field_alloc(priv->dev, priv->srot_map,
+						     priv->fields[TSENS_EN]);
+	if (IS_ERR(priv->rf[TSENS_EN])) {
+		ret = PTR_ERR(priv->rf[TSENS_EN]);
+		goto err_put_device;
+	}
+	ret = regmap_field_read(priv->rf[TSENS_EN], &enabled);
+	if (ret)
+		goto err_put_device;
+	if (!enabled) {
+		dev_err(priv->dev, "tsens device is not enabled\n");
+		ret = -ENODEV;
+		goto err_put_device;
+	}
+
+	priv->rf[SENSOR_EN] = devm_regmap_field_alloc(priv->dev, priv->srot_map,
+						      priv->fields[SENSOR_EN]);
+	if (IS_ERR(priv->rf[SENSOR_EN])) {
+		ret = PTR_ERR(priv->rf[SENSOR_EN]);
+		goto err_put_device;
+	}
+	/* now alloc regmap_fields in tm_map */
+	for (i = 0, j = LAST_TEMP_0; i < priv->num_sensors; i++, j++) {
+		priv->rf[j] = devm_regmap_field_alloc(priv->dev, priv->tm_map,
+						      priv->fields[j]);
+		if (IS_ERR(priv->rf[j])) {
+			ret = PTR_ERR(priv->rf[j]);
 			goto err_put_device;
-		if (!(code & TSENS_EN)) {
-			dev_err(priv->dev, "tsens device is not enabled\n");
-			ret = -ENODEV;
+		}
+	}
+	for (i = 0, j = VALID_0; i < priv->num_sensors; i++, j++) {
+		priv->rf[j] = devm_regmap_field_alloc(priv->dev, priv->tm_map,
+						      priv->fields[j]);
+		if (IS_ERR(priv->rf[j])) {
+			ret = PTR_ERR(priv->rf[j]);
 			goto err_put_device;
 		}
 	}
drivers/thermal/qcom/tsens-v0_1.c +48 -2

73 lines not on this page · raw message

drivers/thermal/qcom/tsens-v2.c +82 -23

151 lines not on this page · raw message

drivers/thermal/qcom/tsens.c +2 -3
index 0b5be08d515f..b91a0b88d33c 100644
@@ -144,9 +144,8 @@ static int tsens_probe(struct platform_device *pdev)
 		else
 			priv->sensor[i].hw_id = i;
 	}
-	for (i = 0; i < REG_ARRAY_SIZE; i++) {
-		priv->reg_offsets[i] = data->reg_offsets[i];
-	}
+	priv->feat = data->feat;
+	priv->fields = data->fields;
 
 	if (!priv->ops || !priv->ops->init || !priv->ops->get_temp)
 		return -EINVAL;
drivers/thermal/qcom/tsens.h +199 -7

247 lines not on this page · raw message

Signature · 1 line
2.17.1
#11 lore raw

PATCH v3 11/23 drivers: thermal: tsens: Save reference to the device pointer and use it

In reply to Amit Kucheria

Code cleanup making it easier to read

---
 drivers/thermal/qcom/tsens-common.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)
drivers/thermal/qcom/tsens-common.c +8 -7
index 0f9deec2517a..9d7a6c328ae0 100644
@@ -119,6 +119,7 @@ static const struct regmap_config tsens_srot_config = {
 int __init init_common(struct tsens_priv *priv)
 {
 	void __iomem *tm_base, *srot_base;
+	struct device *dev = priv->dev;
 	struct resource *res;
 	u32 enabled;
 	int ret, i, j;
@@ -137,7 +138,7 @@ int __init init_common(struct tsens_priv *priv)
 			goto err_put_device;
 		}
 
-		priv->srot_map = devm_regmap_init_mmio(priv->dev, srot_base,
+		priv->srot_map = devm_regmap_init_mmio(dev, srot_base,
 							&tsens_srot_config);
 		if (IS_ERR(priv->srot_map)) {
 			ret = PTR_ERR(priv->srot_map);
@@ -155,13 +156,13 @@ int __init init_common(struct tsens_priv *priv)
 		goto err_put_device;
 	}
 
-	priv->tm_map = devm_regmap_init_mmio(priv->dev, tm_base, &tsens_config);
+	priv->tm_map = devm_regmap_init_mmio(dev, tm_base, &tsens_config);
 	if (IS_ERR(priv->tm_map)) {
 		ret = PTR_ERR(priv->tm_map);
 		goto err_put_device;
 	}
 
-	priv->rf[TSENS_EN] = devm_regmap_field_alloc(priv->dev, priv->srot_map,
+	priv->rf[TSENS_EN] = devm_regmap_field_alloc(dev, priv->srot_map,
 						     priv->fields[TSENS_EN]);
 	if (IS_ERR(priv->rf[TSENS_EN])) {
 		ret = PTR_ERR(priv->rf[TSENS_EN]);
@@ -171,12 +172,12 @@ int __init init_common(struct tsens_priv *priv)
 	if (ret)
 		goto err_put_device;
 	if (!enabled) {
-		dev_err(priv->dev, "tsens device is not enabled\n");
+		dev_err(dev, "tsens device is not enabled\n");
 		ret = -ENODEV;
 		goto err_put_device;
 	}
 
-	priv->rf[SENSOR_EN] = devm_regmap_field_alloc(priv->dev, priv->srot_map,
+	priv->rf[SENSOR_EN] = devm_regmap_field_alloc(dev, priv->srot_map,
 						      priv->fields[SENSOR_EN]);
 	if (IS_ERR(priv->rf[SENSOR_EN])) {
 		ret = PTR_ERR(priv->rf[SENSOR_EN]);
@@ -184,7 +185,7 @@ int __init init_common(struct tsens_priv *priv)
 	}
 	/* now alloc regmap_fields in tm_map */
 	for (i = 0, j = LAST_TEMP_0; i < priv->num_sensors; i++, j++) {
-		priv->rf[j] = devm_regmap_field_alloc(priv->dev, priv->tm_map,
+		priv->rf[j] = devm_regmap_field_alloc(dev, priv->tm_map,
 						      priv->fields[j]);
 		if (IS_ERR(priv->rf[j])) {
 			ret = PTR_ERR(priv->rf[j]);
@@ -192,7 +193,7 @@ int __init init_common(struct tsens_priv *priv)
 		}
 	}
 	for (i = 0, j = VALID_0; i < priv->num_sensors; i++, j++) {
-		priv->rf[j] = devm_regmap_field_alloc(priv->dev, priv->tm_map,
+		priv->rf[j] = devm_regmap_field_alloc(dev, priv->tm_map,
 						      priv->fields[j]);
 		if (IS_ERR(priv->rf[j])) {
 			ret = PTR_ERR(priv->rf[j]);
Signature · 1 line
2.17.1
#12 lore raw

PATCH v3 12/23 drivers: thermal: tsens: Don't print error message on -EPROBE_DEFER

In reply to Amit Kucheria

We print a calibration failure message on -EPROBE_DEFER from nvmem/qfprom as follows:

[    3.003090] qcom-tsens 4a9000.thermal-sensor: version: 1.4
[    3.005376] qcom-tsens 4a9000.thermal-sensor: tsens calibration failed
[    3.113248] qcom-tsens 4a9000.thermal-sensor: version: 1.4

This confuses people when, in fact, calibration succeeds later when nvmem/qfprom device is available. Don't print this message on a -EPROBE_DEFER.

---
 drivers/thermal/qcom/tsens.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/thermal/qcom/tsens.c +2 -1
index b91a0b88d33c..057b33353ba3 100644
@@ -159,7 +159,8 @@ static int tsens_probe(struct platform_device *pdev)
 	if (priv->ops->calibrate) {
 		ret = priv->ops->calibrate(priv);
 		if (ret < 0) {
-			dev_err(dev, "tsens calibration failed\n");
+			if (ret != -EPROBE_DEFER)
+				dev_err(dev, "tsens calibration failed\n");
 			return ret;
 		}
 	}
Signature · 1 line
2.17.1
#13 lore raw

PATCH v3 13/23 drivers: thermal: tsens: Add new operation to check if a sensor is enabled

In reply to Amit Kucheria

is_sensor_enabled() checks if the sensors are enabled on this platform. It is possible that the SoC might choose not to enable all the sensors that the IP block is capable of supporting.

---
 drivers/thermal/qcom/tsens-common.c | 14 ++++++++++++++
 drivers/thermal/qcom/tsens-v0_1.c   |  1 +
 drivers/thermal/qcom/tsens-v2.c     |  1 +
 drivers/thermal/qcom/tsens.c        |  5 +++++
 drivers/thermal/qcom/tsens.h        |  1 +
 5 files changed, 22 insertions(+)
drivers/thermal/qcom/tsens-common.c +14 -0
index 9d7a6c328ae0..c76f8cfb25a2 100644
@@ -69,6 +69,20 @@ void compute_intercept_slope(struct tsens_priv *priv, u32 *p1,
 	}
 }
 
+bool is_sensor_enabled(struct tsens_priv *priv, u32 hw_id)
+{
+	u32 val;
+	int ret;
+
+	if ((hw_id > (priv->num_sensors - 1)) || (hw_id < 0))
+		return -EINVAL;
+	ret = regmap_field_read(priv->rf[SENSOR_EN], &val);
+	if (ret)
+		return ret;
+
+	return val & (1 << hw_id);
+}
+
 static inline int code_to_degc(u32 adc_code, const struct tsens_sensor *s)
 {
 	int degc, num, den;
drivers/thermal/qcom/tsens-v0_1.c +1 -0
index d171a4a8c454..431255bfd0ef 100644
@@ -333,6 +333,7 @@ const struct reg_field tsens_v0_1_regfields[MAX_REGFIELDS] = {
 	/* CTRL_OFFSET */
 	[TSENS_EN]     = REG_FIELD(SROT_CTRL_OFF, 0,  0),
 	[TSENS_SW_RST] = REG_FIELD(SROT_CTRL_OFF, 1,  1),
+	[SENSOR_EN]    = REG_FIELD(SROT_CTRL_OFF, 3, 13),
 
 	/* ----- TM ------ */
 	/* INTERRUPT ENABLE */
drivers/thermal/qcom/tsens-v2.c +1 -0
index e15a302f7878..4b98dbe4e3c3 100644
@@ -99,6 +99,7 @@ const struct reg_field tsens_v2_regfields[MAX_REGFIELDS] = {
 	/* CTRL_OFF */
 	[TSENS_EN]     = REG_FIELD(SROT_CTRL_OFF,    0,  0),
 	[TSENS_SW_RST] = REG_FIELD(SROT_CTRL_OFF,    1,  1),
+	[SENSOR_EN]    = REG_FIELD(SROT_CTRL_OFF,    3, 18),
 
 	/* ----- TM ------ */
 	/* INTERRUPT ENABLE */
drivers/thermal/qcom/tsens.c +5 -0
index 057b33353ba3..fc44cac31fa5 100644
@@ -82,6 +82,11 @@ static int tsens_register(struct tsens_priv *priv)
 	struct thermal_zone_device *tzd;
 
 	for (i = 0;  i < priv->num_sensors; i++) {
+		if (!is_sensor_enabled(priv, priv->sensor[i].hw_id)) {
+			dev_err(priv->dev, "sensor %d: disabled\n",
+				priv->sensor[i].hw_id);
+			continue;
+		}
 		priv->sensor[i].priv = priv;
 		priv->sensor[i].id = i;
 		tzd = devm_thermal_zone_of_sensor_register(priv->dev, i,
drivers/thermal/qcom/tsens.h +1 -0
index a9390e06b4dd..a3bf7de88ae8 100644
@@ -307,6 +307,7 @@ char *qfprom_read(struct device *dev, const char *cname);
 void compute_intercept_slope(struct tsens_priv *priv, u32 *pt1, u32 *pt2, u32 mode);
 int init_common(struct tsens_priv *priv);
 int get_temp_common(struct tsens_priv *priv, int i, int *temp);
+bool is_sensor_enabled(struct tsens_priv *priv, u32 hw_id);
 
 /* TSENS target */
 extern const struct tsens_plat_data data_8960;
Signature · 1 line
2.17.1
#14 lore raw

PATCH v3 14/23 drivers: thermal: tsens: change data type for sensor IDs

In reply to Amit Kucheria

The IDs cannot be negative, fix the data type.

---
 drivers/thermal/qcom/tsens.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/thermal/qcom/tsens.h +2 -2
index a3bf7de88ae8..527c42cfd2d5 100644
@@ -35,8 +35,8 @@ struct tsens_sensor {
 	struct tsens_priv		*priv;
 	struct thermal_zone_device	*tzd;
 	int				offset;
-	int				id;
-	int				hw_id;
+	unsigned int			id;
+	unsigned int			hw_id;
 	int				slope;
 	u32				status;
 };
Signature · 1 line
2.17.1
#15 lore raw

PATCH v3 15/23 drivers: thermal: tsens: Introduce IP-specific max_sensor count

In reply to Amit Kucheria

The IP can support 'm' sensors while the platform can enable 'n' sensors of the 'm' where n <= m.

Track maximum sensors supported by the IP so that we can correctly track what subset of the sensors are supported on the platform.

---
 drivers/thermal/qcom/tsens-common.c | 4 ++--
 drivers/thermal/qcom/tsens-v0_1.c   | 1 +
 drivers/thermal/qcom/tsens-v2.c     | 1 +
 drivers/thermal/qcom/tsens.h        | 2 ++
 4 files changed, 6 insertions(+), 2 deletions(-)
drivers/thermal/qcom/tsens-common.c +2 -2
index c76f8cfb25a2..5607c5cc635c 100644
@@ -198,7 +198,7 @@ int __init init_common(struct tsens_priv *priv)
 		goto err_put_device;
 	}
 	/* now alloc regmap_fields in tm_map */
-	for (i = 0, j = LAST_TEMP_0; i < priv->num_sensors; i++, j++) {
+	for (i = 0, j = LAST_TEMP_0; i < priv->feat->max_sensors; i++, j++) {
 		priv->rf[j] = devm_regmap_field_alloc(dev, priv->tm_map,
 						      priv->fields[j]);
 		if (IS_ERR(priv->rf[j])) {
@@ -206,7 +206,7 @@ int __init init_common(struct tsens_priv *priv)
 			goto err_put_device;
 		}
 	}
-	for (i = 0, j = VALID_0; i < priv->num_sensors; i++, j++) {
+	for (i = 0, j = VALID_0; i < priv->feat->max_sensors; i++, j++) {
 		priv->rf[j] = devm_regmap_field_alloc(dev, priv->tm_map,
 						      priv->fields[j]);
 		if (IS_ERR(priv->rf[j])) {
drivers/thermal/qcom/tsens-v0_1.c +1 -0
index 431255bfd0ef..b3a63d7b19ea 100644
@@ -324,6 +324,7 @@ const struct tsens_features tsens_v0_1_feat = {
 	.crit_int	= 0,
 	.adc		= 1,
 	.srot_split	= 1,
+	.max_sensors	= 11,
 };
 
 const struct reg_field tsens_v0_1_regfields[MAX_REGFIELDS] = {
drivers/thermal/qcom/tsens-v2.c +1 -0
index 4b98dbe4e3c3..f3eb8661cf7a 100644
@@ -88,6 +88,7 @@ const struct tsens_features tsens_v2_feat = {
 	.crit_int	= 1,
 	.adc		= 0,
 	.srot_split	= 1,
+	.max_sensors	= 16,
 };
 
 const struct reg_field tsens_v2_regfields[MAX_REGFIELDS] = {
drivers/thermal/qcom/tsens.h +2 -0
index 527c42cfd2d5..080e15a09ac2 100644
@@ -242,12 +242,14 @@ enum regfield_ids {
  * @adc:      do the sensors only output adc code (instead of temperature)?
  * @srot_split: does the IP neatly splits the register space into SROT and TM,
  *              with SROT only being available to secure boot firmware?
+ * @max_sensors: maximum sensors supported by this version of the IP
  */
 struct tsens_features {
 	unsigned int ver_major;
 	unsigned int crit_int:1;
 	unsigned int adc:1;
 	unsigned int srot_split:1;
+	unsigned int max_sensors;
 };
 
 /**
Signature · 1 line
2.17.1
#16 lore raw

PATCH v3 16/23 drivers: thermal: tsens: simplify get_temp_tsens_v2 routine

In reply to Amit Kucheria

The current implementation is based on an algorithm published in the docs. Instead of reading the temperature thrice w/o any explanation, improve the algorithm.

This will become the basis for a common get_temp routine in the future.

---
 drivers/thermal/qcom/tsens-v2.c | 55 ++++++++++-----------------------
 1 file changed, 17 insertions(+), 38 deletions(-)
drivers/thermal/qcom/tsens-v2.c +17 -38
index f3eb8661cf7a..716d7f827459 100644
@@ -25,58 +25,37 @@
 #define TM_Sn_STATUS_OFF		0x00a0
 #define TM_TRDY_OFF			0x00e4
 
-#define LAST_TEMP_MASK		0xfff
-
-static int get_temp_tsens_v2(struct tsens_priv *priv, int id, int *temp)
+static int get_temp_tsens_v2(struct tsens_priv *priv, int i, int *temp)
 {
-	struct tsens_sensor *s = &priv->sensor[id];
+	struct tsens_sensor *s = &priv->sensor[i];
 	u32 temp_idx = LAST_TEMP_0 + s->hw_id;
 	u32 valid_idx = VALID_0 + s->hw_id;
-	u32 last_temp = 0, last_temp2 = 0, last_temp3 = 0, valid;
+	u32 last_temp = 0, valid, mask;
 	int ret;
 
-	ret = regmap_field_read(priv->rf[temp_idx], &last_temp);
-	if (ret)
-		return ret;
-
 	ret = regmap_field_read(priv->rf[valid_idx], &valid);
 	if (ret)
 		return ret;
-
-	if (valid)
-		goto done;
-
-	/* Try a second time */
-	ret = regmap_field_read(priv->rf[valid_idx], &valid);
-	if (ret)
-		return ret;
-	ret = regmap_field_read(priv->rf[temp_idx], &last_temp2);
-	if (ret)
-		return ret;
-	if (valid) {
-		last_temp = last_temp2;
-		goto done;
+	while (!valid) {
+		/* Valid bit is 0 for 6 AHB clock cycles.
+		 * At 19.2MHz, 1 AHB clock is ~60ns.
+		 * We should enter this loop very, very rarely.
+		 */
+		ndelay(400);
+		ret = regmap_field_read(priv->rf[valid_idx], &valid);
+		if (ret)
+			return ret;
 	}
 
-	/* Try a third/last time */
-	ret = regmap_field_read(priv->rf[valid_idx], &valid);
-	if (ret)
-		return ret;
-	ret = regmap_field_read(priv->rf[temp_idx], &last_temp3);
+	/* Valid bit is set, OK to read the temperature */
+	ret = regmap_field_read(priv->rf[temp_idx], &last_temp);
 	if (ret)
 		return ret;
-	if (valid) {
-		last_temp = last_temp3;
-		goto done;
-	}
 
-	if (last_temp == last_temp2)
-		last_temp = last_temp2;
-	else if (last_temp2 == last_temp3)
-		last_temp = last_temp3;
-done:
+	mask = GENMASK(priv->fields[LAST_TEMP_0].msb,
+		       priv->fields[LAST_TEMP_0].lsb);
 	/* Convert temperature from deciCelsius to milliCelsius */
-	*temp = sign_extend32(last_temp, fls(LAST_TEMP_MASK) - 1) * 100;
+	*temp = sign_extend32(last_temp, fls(mask) - 1) * 100;
 
 	return 0;
 }
Signature · 1 line
2.17.1
#17 lore raw

PATCH v3 17/23 drivers: thermal: tsens: Move get_temp_tsens_v2 to allow sharing

In reply to Amit Kucheria

Just rename the function and move it to allow code sharing with future versions of TSENS IP

---
 drivers/thermal/qcom/tsens-common.c | 35 +++++++++++++++++++++++++++
 drivers/thermal/qcom/tsens-v2.c     | 37 +----------------------------
 drivers/thermal/qcom/tsens.h        |  1 +
 3 files changed, 37 insertions(+), 36 deletions(-)
drivers/thermal/qcom/tsens-common.c +35 -0
index 5607c5cc635c..5adbf1a2e0fb 100644
@@ -102,6 +102,41 @@ static inline int code_to_degc(u32 adc_code, const struct tsens_sensor *s)
 	return degc;
 }
 
+int get_temp_tsens_valid(struct tsens_priv *priv, int i, int *temp)
+{
+	struct tsens_sensor *s = &priv->sensor[i];
+	u32 temp_idx = LAST_TEMP_0 + s->hw_id;
+	u32 valid_idx = VALID_0 + s->hw_id;
+	u32 last_temp = 0, valid, mask;
+	int ret;
+
+	ret = regmap_field_read(priv->rf[valid_idx], &valid);
+	if (ret)
+		return ret;
+	while (!valid) {
+		/* Valid bit is 0 for 6 AHB clock cycles.
+		 * At 19.2MHz, 1 AHB clock is ~60ns.
+		 * We should enter this loop very, very rarely.
+		 */
+		ndelay(400);
+		ret = regmap_field_read(priv->rf[valid_idx], &valid);
+		if (ret)
+			return ret;
+	}
+
+	/* Valid bit is set, OK to read the temperature */
+	ret = regmap_field_read(priv->rf[temp_idx], &last_temp);
+	if (ret)
+		return ret;
+
+	mask = GENMASK(priv->fields[LAST_TEMP_0].msb,
+		       priv->fields[LAST_TEMP_0].lsb);
+	/* Convert temperature from deciCelsius to milliCelsius */
+	*temp = sign_extend32(last_temp, fls(mask) - 1) * 100;
+
+	return 0;
+}
+
 int get_temp_common(struct tsens_priv *priv, int i, int *temp)
 {
 	struct tsens_sensor *s = &priv->sensor[i];
drivers/thermal/qcom/tsens-v2.c +1 -36
index 716d7f827459..36fbfa6a471e 100644
@@ -25,41 +25,6 @@
 #define TM_Sn_STATUS_OFF		0x00a0
 #define TM_TRDY_OFF			0x00e4
 
-static int get_temp_tsens_v2(struct tsens_priv *priv, int i, int *temp)
-{
-	struct tsens_sensor *s = &priv->sensor[i];
-	u32 temp_idx = LAST_TEMP_0 + s->hw_id;
-	u32 valid_idx = VALID_0 + s->hw_id;
-	u32 last_temp = 0, valid, mask;
-	int ret;
-
-	ret = regmap_field_read(priv->rf[valid_idx], &valid);
-	if (ret)
-		return ret;
-	while (!valid) {
-		/* Valid bit is 0 for 6 AHB clock cycles.
-		 * At 19.2MHz, 1 AHB clock is ~60ns.
-		 * We should enter this loop very, very rarely.
-		 */
-		ndelay(400);
-		ret = regmap_field_read(priv->rf[valid_idx], &valid);
-		if (ret)
-			return ret;
-	}
-
-	/* Valid bit is set, OK to read the temperature */
-	ret = regmap_field_read(priv->rf[temp_idx], &last_temp);
-	if (ret)
-		return ret;
-
-	mask = GENMASK(priv->fields[LAST_TEMP_0].msb,
-		       priv->fields[LAST_TEMP_0].lsb);
-	/* Convert temperature from deciCelsius to milliCelsius */
-	*temp = sign_extend32(last_temp, fls(mask) - 1) * 100;
-
-	return 0;
-}
-
 /* v2.x: 8996, 8998, sdm845 */
 
 const struct tsens_features tsens_v2_feat = {
@@ -101,7 +66,7 @@ const struct reg_field tsens_v2_regfields[MAX_REGFIELDS] = {
 
 static const struct tsens_ops ops_generic_v2 = {
 	.init		= init_common,
-	.get_temp	= get_temp_tsens_v2,
+	.get_temp	= get_temp_tsens_valid,
 };
 
 const struct tsens_plat_data data_tsens_v2 = {
drivers/thermal/qcom/tsens.h +1 -0
index 080e15a09ac2..f14a87aa1a47 100644
@@ -308,6 +308,7 @@ struct tsens_priv {
 char *qfprom_read(struct device *dev, const char *cname);
 void compute_intercept_slope(struct tsens_priv *priv, u32 *pt1, u32 *pt2, u32 mode);
 int init_common(struct tsens_priv *priv);
+int get_temp_tsens_valid(struct tsens_priv *priv, int i, int *temp);
 int get_temp_common(struct tsens_priv *priv, int i, int *temp);
 bool is_sensor_enabled(struct tsens_priv *priv, u32 hw_id);
 
Signature · 1 line
2.17.1
#18 lore raw

PATCH v3 18/23 drivers: thermal: tsens: Common get_temp() learns to do ADC conversion

In reply to Amit Kucheria

get_temp() learns to return temperature regardless of whether it is returned as ADC code or direct temperature.

---
 drivers/thermal/qcom/tsens-common.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)
drivers/thermal/qcom/tsens-common.c +9 -4
index 5adbf1a2e0fb..92747ccb2850 100644
@@ -129,10 +129,15 @@ int get_temp_tsens_valid(struct tsens_priv *priv, int i, int *temp)
 	if (ret)
 		return ret;
 
-	mask = GENMASK(priv->fields[LAST_TEMP_0].msb,
-		       priv->fields[LAST_TEMP_0].lsb);
-	/* Convert temperature from deciCelsius to milliCelsius */
-	*temp = sign_extend32(last_temp, fls(mask) - 1) * 100;
+	if (priv->feat->adc) {
+		/* Convert temperature from ADC code to milliCelsius */
+		*temp = code_to_degc(last_temp, s) * 1000;
+	} else {
+		mask = GENMASK(priv->fields[LAST_TEMP_0].msb,
+			       priv->fields[LAST_TEMP_0].lsb);
+		/* Convert temperature from deciCelsius to milliCelsius */
+		*temp = sign_extend32(last_temp, fls(mask) - 1) * 100;
+	}
 
 	return 0;
 }
Signature · 1 line
2.17.1
#19 lore raw

PATCH v3 19/23 dt: thermal: tsens: Add bindings for qcs404

In reply to Amit Kucheria

qcs404 uses v1 of the TSENS IP block. Create a fallback DT property "qcom,tsens-v1" to gather common code

---
 .../devicetree/bindings/thermal/qcom-tsens.txt     | 14 ++++++++++++++
 1 file changed, 14 insertions(+)
Documentation/devicetree/bindings/thermal/qcom-tsens.txt +14 -0
index 1d9e8cf61018..673cc1831ee9 100644
@@ -6,11 +6,14 @@ Required properties:
     - "qcom,msm8916-tsens" (MSM8916)
     - "qcom,msm8974-tsens" (MSM8974)
     - "qcom,msm8996-tsens" (MSM8996)
+    - "qcom,qcs404-tsens", "qcom,tsens-v1" (QCS404)
     - "qcom,msm8998-tsens", "qcom,tsens-v2" (MSM8998)
     - "qcom,sdm845-tsens", "qcom,tsens-v2" (SDM845)
   The generic "qcom,tsens-v2" property must be used as a fallback for any SoC
   with version 2 of the TSENS IP. MSM8996 is the only exception because the
   generic property did not exist when support was added.
+  Similarly, the generic "qcom,tsens-v1" property must be used as a fallback for
+  any SoC with version 1 of the TSENS IP.
 
 - reg: Address range of the thermal registers.
   New platforms containing v2.x.y of the TSENS IP must specify the SROT and TM
@@ -39,3 +42,14 @@ tsens0: thermal-sensor@c263000 {
 		#qcom,sensors = <13>;
 		#thermal-sensor-cells = <1>;
 	};
+
+Example 3 (for any platform containing v1 of the TSENS IP):
+tsens: thermal-sensor@4a9000 {
+		compatible = "qcom,qcs404-tsens", "qcom,tsens-v1";
+		reg = <0x004a9000 0x1000>, /* TM */
+		      <0x004a8000 0x1000>; /* SROT */
+		nvmem-cells = <&tsens_caldata>;
+		nvmem-cell-names = "calib";
+		#qcom,sensors = <10>;
+		#thermal-sensor-cells = <1>;
+	};
Signature · 1 line
2.17.1
#20 lore raw

PATCH v3 20/23 drivers: thermal: tsens: Add generic support for TSENS v1 IP

In reply to Amit Kucheria

qcs404 has a single TSENS IP block with 10 sensors. It uses version 1.4 of the TSENS IP, functionality for which is encapsulated inside the qcom,tsens-v1 compatible.

---
 drivers/thermal/qcom/Makefile   |   4 +-
 drivers/thermal/qcom/tsens-v1.c | 193 ++++++++++++++++++++++++++++++++
 drivers/thermal/qcom/tsens.c    |   3 +
 drivers/thermal/qcom/tsens.h    |   3 +
 4 files changed, 202 insertions(+), 1 deletion(-)
 create mode 100644 drivers/thermal/qcom/tsens-v1.c
drivers/thermal/qcom/Makefile +3 -1
index 7fa3cadce760..fc6fe50cdde4 100644
@@ -1,3 +1,5 @@
 obj-$(CONFIG_QCOM_TSENS)	+= qcom_tsens.o
-qcom_tsens-y			+= tsens.o tsens-common.o tsens-v0_1.o tsens-8960.o tsens-v2.o
+
+qcom_tsens-y			+= tsens.o tsens-common.o tsens-v0_1.o \
+				   tsens-8960.o tsens-v2.o tsens-v1.o
 obj-$(CONFIG_QCOM_SPMI_TEMP_ALARM)	+= qcom-spmi-temp-alarm.o
drivers/thermal/qcom/tsens-v1.c new file +193 -0

193 lines not on this page · raw message

drivers/thermal/qcom/tsens.c +3 -0
index fc44cac31fa5..36b0b52db524 100644
@@ -63,6 +63,9 @@ static const struct of_device_id tsens_table[] = {
 	}, {
 		.compatible = "qcom,msm8996-tsens",
 		.data = &data_8996,
+	}, {
+		.compatible = "qcom,tsens-v1",
+		.data = &data_tsens_v1,
 	}, {
 		.compatible = "qcom,tsens-v2",
 		.data = &data_tsens_v2,
drivers/thermal/qcom/tsens.h +3 -0
index f14a87aa1a47..d648fba235cf 100644
@@ -318,6 +318,9 @@ extern const struct tsens_plat_data data_8960;
 /* TSENS v0.1 targets */
 extern const struct tsens_plat_data data_8916, data_8974;
 
+/* TSENS v1 targets */
+extern const struct tsens_plat_data data_tsens_v1;
+
 /* TSENS v2 targets */
 extern const struct tsens_plat_data data_8996, data_tsens_v2;
 
Signature · 1 line
2.17.1
#21 lore raw

PATCH v3 21/23 arm64: dts: qcom: qcs404: Add tsens controller

In reply to Amit Kucheria

qcs404 has a single TSENS IP block with 10 sensors. The calibration data is stored in an eeprom (qfprom) that is accessed through the nvmem framework. We add the qfprom node to allow the tsens sensors to be calibrated correctly.

---
 arch/arm64/boot/dts/qcom/qcs404.dtsi | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
arch/arm64/boot/dts/qcom/qcs404.dtsi +20 -0
index e8fd26633d57..7881792980b8 100644
@@ -259,6 +259,16 @@
 			reg = <0x00060000 0x6000>;
 		};
 
+		qfprom: qfprom@a4000 {
+			compatible = "qcom,qfprom";
+			reg = <0x000a4000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			tsens_caldata: caldata@d0 {
+				reg = <0x1f8 0x14>;
+			};
+		};
+
 		rng: rng@e3000 {
 			compatible = "qcom,prng-ee";
 			reg = <0x000e3000 0x1000>;
@@ -266,6 +276,16 @@
 			clock-names = "core";
 		};
 
+		tsens: thermal-sensor@4a9000 {
+			compatible = "qcom,qcs404-tsens", "qcom,tsens-v1";
+			reg = <0x004a9000 0x1000>, /* TM */
+			      <0x004a8000 0x1000>; /* SROT */
+			nvmem-cells = <&tsens_caldata>;
+			nvmem-cell-names = "calib";
+			#qcom,sensors = <10>;
+			#thermal-sensor-cells = <1>;
+		};
+
 		tlmm: pinctrl@1000000 {
 			compatible = "qcom,qcs404-pinctrl";
 			reg = <0x01000000 0x200000>,
Signature · 1 line
2.17.1
#22 lore raw

Re: [PATCHv3 21/23] arm64: dts: qcom: qcs404: Add tsens controller

Quoted 7 lines · Amit Kucheria

qcs404 has a single TSENS IP block with 10 sensors. The calibration data is stored in an eeprom (qfprom) that is accessed through the nvmem framework. We add the qfprom node to allow the tsens sensors to be calibrated correctly.

Hi Bjorn,

Could you please pick this patch and patch 22 in this series if you have no other review comments? I can resend these separately if required.

The driver (drivers/thermal/qcom/tsens-v1.c) was merged and only these DT changes are pending.

Regards,
Amit

Quoted 45 lines
---
 arch/arm64/boot/dts/qcom/qcs404.dtsi | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
arch/arm64/boot/dts/qcom/qcs404.dtsi +20 -1
index e8fd26633d57..7881792980b8 100644
@@ -259,6 +259,16 @@
                        reg = <0x00060000 0x6000>;
                };
 
+               qfprom: qfprom@a4000 {
+                       compatible = "qcom,qfprom";
+                       reg = <0x000a4000 0x1000>;
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       tsens_caldata: caldata@d0 {
+                               reg = <0x1f8 0x14>;
+                       };
+               };
+
                rng: rng@e3000 {
                        compatible = "qcom,prng-ee";
                        reg = <0x000e3000 0x1000>;
@@ -266,6 +276,16 @@
                        clock-names = "core";
                };
 
+               tsens: thermal-sensor@4a9000 {
+                       compatible = "qcom,qcs404-tsens", "qcom,tsens-v1";
+                       reg = <0x004a9000 0x1000>, /* TM */
+                             <0x004a8000 0x1000>; /* SROT */
+                       nvmem-cells = <&tsens_caldata>;
+                       nvmem-cell-names = "calib";
+                       #qcom,sensors = <10>;
+                       #thermal-sensor-cells = <1>;
+               };
+
                tlmm: pinctrl@1000000 {
                        compatible = "qcom,qcs404-pinctrl";
                        reg = <0x01000000 0x200000>,
--

2.17.1

#23 lore raw

PATCH v3 22/23 arm64: dts: qcom: qcs404: Add thermal zones for each sensor

In reply to Amit Kucheria

qcs404 has 10 sensors connected to the single TSENS IP. Define a thermal zone for each of those sensors to expose the temperature of each zone.

---
 arch/arm64/boot/dts/qcom/qcs404.dtsi | 252 +++++++++++++++++++++++++++
 1 file changed, 252 insertions(+)
arch/arm64/boot/dts/qcom/qcs404.dtsi +252 -0
index 7881792980b8..2423c816b98d 100644
@@ -4,6 +4,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-qcs404.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	interrupt-parent = <&intc>;
@@ -31,6 +32,7 @@
 			reg = <0x100>;
 			enable-method = "psci";
 			next-level-cache = <&L2_0>;
+			#cooling-cells= <2>;
 		};
 
 		CPU1: cpu@101 {
@@ -39,6 +41,7 @@
 			reg = <0x101>;
 			enable-method = "psci";
 			next-level-cache = <&L2_0>;
+			#cooling-cells= <2>;
 		};
 
 		CPU2: cpu@102 {
@@ -47,6 +50,7 @@
 			reg = <0x102>;
 			enable-method = "psci";
 			next-level-cache = <&L2_0>;
+			#cooling-cells= <2>;
 		};
 
 		CPU3: cpu@103 {
@@ -55,6 +59,7 @@
 			reg = <0x103>;
 			enable-method = "psci";
 			next-level-cache = <&L2_0>;
+			#cooling-cells= <2>;
 		};
 
 		L2_0: l2-cache {
@@ -866,4 +871,251 @@
 			#interrupt-cells = <2>;
 		};
 	};
+
+	thermal-zones {
+		aoss-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 0>;
+
+			trips {
+				aoss_alert0: trip-point@0 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		q6-hvx-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 1>;
+
+			trips {
+				q6_hvx_alert0: trip-point@0 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		lpass-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 2>;
+
+			trips {
+				lpass_alert0: trip-point@0 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		wlan-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 3>;
+
+			trips {
+				wlan_alert0: trip-point@0 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		cluster-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 4>;
+
+			trips {
+				cluster_alert0: trip-point@0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cluster_alert1: trip-point@1 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cluster_crit: cluster_crit {
+					temperature = <120000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cluster_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 5>;
+
+			trips {
+				cpu0_alert0: trip-point@0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cpu0_alert1: trip-point@1 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu0_crit: cpu_crit {
+					temperature = <120000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 6>;
+
+			trips {
+				cpu1_alert0: trip-point@0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cpu1_alert1: trip-point@1 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu1_crit: cpu_crit {
+					temperature = <120000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu1_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 7>;
+
+			trips {
+				cpu2_alert0: trip-point@0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cpu2_alert1: trip-point@1 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu2_crit: cpu_crit {
+					temperature = <120000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu2_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 8>;
+
+			trips {
+				cpu3_alert0: trip-point@0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cpu3_alert1: trip-point@1 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu3_crit: cpu_crit {
+					temperature = <120000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu3_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 9>;
+
+			trips {
+				gpu_alert0: trip-point@0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+	};
 };
Signature · 1 line
2.17.1
#24 lore raw

PATCH v3 23/23 drivers: thermal: tsens: Move calibration constants to header file

In reply to Amit Kucheria

This will allow calibration routines to correctly include the constants from anywhere and allow more code sharing.

---
 drivers/thermal/qcom/tsens-common.c | 5 -----
 drivers/thermal/qcom/tsens.h        | 5 +++++
 2 files changed, 5 insertions(+), 5 deletions(-)
drivers/thermal/qcom/tsens-common.c +0 -5
index 92747ccb2850..928e8e81ba69 100644
@@ -12,11 +12,6 @@
 #include <linux/regmap.h>
 #include "tsens.h"
 
-#define CAL_DEGC_PT1		30
-#define CAL_DEGC_PT2		120
-#define SLOPE_FACTOR		1000
-#define SLOPE_DEFAULT		3200
-
 char *qfprom_read(struct device *dev, const char *cname)
 {
 	struct nvmem_cell *cell;
drivers/thermal/qcom/tsens.h +5 -0
index d648fba235cf..eefe3844fb4e 100644
@@ -9,6 +9,11 @@
 #define ONE_PT_CALIB		0x1
 #define ONE_PT_CALIB2		0x2
 #define TWO_PT_CALIB		0x3
+#define CAL_DEGC_PT1		30
+#define CAL_DEGC_PT2		120
+#define SLOPE_FACTOR		1000
+#define SLOPE_DEFAULT		3200
+
 
 #include <linux/thermal.h>
 #include <linux/regmap.h>
Signature · 1 line
2.17.1