Skip to contentSkip to conversation

powerpc/32: Implement fast syscall entry

PATCH Superseded Christophe Leroy 1 participant 18 messages Mar 29, 2019 PowerPC

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

v2 cover powerpc/32: Implement fast syscall entry

The purpose of this series is to implement a fast syscall entry on ppc32, as already done on ppc64.

Unlike all other exceptions which can happen at any time and require to preserve all registers, the syscalls do not require the preservation of volatile registers (except LR).

Syscall entries can then be optimised with lighter entry code than the general exception handling.

In the meantime this series refactorises the exception entry on 40x/6xx/8xx as they are pretty similar, and it takes benh series on rationalising the settings of MSR_EE at exceptions/syscall entries as this change pretty simplies exception entries.

On a 8xx, this series improves null_syscall selftest by 17% On a 83xx, this series improves null_syscall selftest by 12,5%

v2:
- Rebased on latest powerpc/merge branch.
- Added booke support as well (tested on qemu bamboo).
- Added a patch to get rid of the dummy frames when calling trace_hardirqs_on/off.

Christophe Leroy (17):
powerpc/32: Refactor EXCEPTION entry macros for head_8xx.S and

    head_32.S
  powerpc/32: move LOAD_MSR_KERNEL() into head_32.h and use it
  powerpc/32: make the 6xx/8xx EXC_XFER_TEMPLATE() similar to the
    40x/booke one

powerpc/40x: Don't use SPRN_SPRG_SCRATCH2 in EXCEPTION_PROLOG powerpc/40x: add exception frame marker
powerpc/40x: Split and rename NORMAL_EXCEPTION_PROLOG powerpc/40x: Refactor exception entry macros by using head_32.h powerpc/fsl_booke: ensure SPEFloatingPointException() reenables
interrupts
powerpc/32: enter syscall with MSR_EE inconditionaly set powerpc/32: Enter exceptions with MSR_EE unset
powerpc/32: get rid of COPY_EE in exception entry
powerpc: Fix 32-bit handling of MSR_EE on exceptions powerpc/32: implement fast entry for syscalls on non BOOKE powerpc/32: implement fast entry for syscalls on BOOKE powerpc/32: Remove MSR_PR test when returning from syscall powerpc/32: don't do syscall stuff in transfer_to_handler powerpc/32: Don't add dummy frames when calling trace_hardirqs_on/off

 arch/powerpc/kernel/entry_32.S       | 158 +++++++++++++--------------
 arch/powerpc/kernel/head_32.S        | 170 +++++++----------------------
 arch/powerpc/kernel/head_32.h        | 203 +++++++++++++++++++++++++++++++++++
 arch/powerpc/kernel/head_40x.S       | 152 +++++++-------------------
 arch/powerpc/kernel/head_44x.S       |   9 +-
 arch/powerpc/kernel/head_8xx.S       | 133 ++++-------------------
 arch/powerpc/kernel/head_booke.h     | 131 +++++++++++++++++-----
 arch/powerpc/kernel/head_fsl_booke.S |  29 +++--
 arch/powerpc/kernel/traps.c          |   8 ++
 9 files changed, 508 insertions(+), 485 deletions(-)
 create mode 100644 arch/powerpc/kernel/head_32.h
Signature · 1 line
2.13.3
#1 lore raw

PATCH v2 1/17 powerpc/32: Refactor EXCEPTION entry macros for head_8xx.S and head_32.S

EXCEPTION_PROLOG is similar in head_8xx.S and head_32.S

This patch creates head_32.h and moves EXCEPTION_PROLOG macro into it. It also converts it from a GCC macro to a GAS macro in order to ease refactorisation with 40x later, since GAS macros allows the use of #ifdef/#else/#endif inside it. And it also has the advantage of not requiring the uggly "; \" at the end of each line.

This patch also moves EXCEPTION() and EXC_XFER_XXXX() macros which are also similar while adding START_EXCEPTION() out of EXCEPTION().

---
 arch/powerpc/kernel/head_32.S  |  99 +---------------------------------
 arch/powerpc/kernel/head_32.h  | 118 +++++++++++++++++++++++++++++++++++++++++
 arch/powerpc/kernel/head_8xx.S |  98 +---------------------------------
 3 files changed, 122 insertions(+), 193 deletions(-)
 create mode 100644 arch/powerpc/kernel/head_32.h
arch/powerpc/kernel/head_32.S +2 -97
index 48051c8977c5..577d196c26f2 100644
@@ -37,6 +37,8 @@
 #include <asm/export.h>
 #include <asm/feature-fixups.h>
 
+#include "head_32.h"
+
 /* 601 only have IBAT; cr0.eq is set on 601 when using this macro */
 #define LOAD_BAT(n, reg, RA, RB)	\
 	/* see the comment for clear_bats() -- Cort */ \
@@ -242,103 +244,6 @@ __secondary_hold_spinloop:
 __secondary_hold_acknowledge:
 	.long	-1
 
-/*
- * Exception entry code.  This code runs with address translation
- * turned off, i.e. using physical addresses.
- * We assume sprg3 has the physical address of the current
- * task's thread_struct.
- */
-#define EXCEPTION_PROLOG	\
-	mtspr	SPRN_SPRG_SCRATCH0,r10;	\
-	mtspr	SPRN_SPRG_SCRATCH1,r11;	\
-	mfcr	r10;		\
-	EXCEPTION_PROLOG_1;	\
-	EXCEPTION_PROLOG_2
-
-#define EXCEPTION_PROLOG_1	\
-	mfspr	r11,SPRN_SRR1;		/* check whether user or kernel */ \
-	andi.	r11,r11,MSR_PR;	\
-	tophys(r11,r1);			/* use tophys(r1) if kernel */ \
-	beq	1f;		\
-	mfspr	r11,SPRN_SPRG_THREAD;	\
-	lwz	r11,TASK_STACK-THREAD(r11);	\
-	addi	r11,r11,THREAD_SIZE;	\
-	tophys(r11,r11);	\
-1:	subi	r11,r11,INT_FRAME_SIZE	/* alloc exc. frame */
-
-
-#define EXCEPTION_PROLOG_2	\
-	stw	r10,_CCR(r11);		/* save registers */ \
-	stw	r12,GPR12(r11);	\
-	stw	r9,GPR9(r11);	\
-	mfspr	r10,SPRN_SPRG_SCRATCH0;	\
-	stw	r10,GPR10(r11);	\
-	mfspr	r12,SPRN_SPRG_SCRATCH1;	\
-	stw	r12,GPR11(r11);	\
-	mflr	r10;		\
-	stw	r10,_LINK(r11);	\
-	mfspr	r12,SPRN_SRR0;	\
-	mfspr	r9,SPRN_SRR1;	\
-	stw	r1,GPR1(r11);	\
-	stw	r1,0(r11);	\
-	tovirt(r1,r11);			/* set new kernel sp */	\
-	li	r10,MSR_KERNEL & ~(MSR_IR|MSR_DR); /* can take exceptions */ \
-	MTMSRD(r10);			/* (except for mach check in rtas) */ \
-	stw	r0,GPR0(r11);	\
-	lis	r10,STACK_FRAME_REGS_MARKER@ha; /* exception frame marker */ \
-	addi	r10,r10,STACK_FRAME_REGS_MARKER@l; \
-	stw	r10,8(r11);	\
-	SAVE_4GPRS(3, r11);	\
-	SAVE_2GPRS(7, r11)
-
-/*
- * Note: code which follows this uses cr0.eq (set if from kernel),
- * r11, r12 (SRR0), and r9 (SRR1).
- *
- * Note2: once we have set r1 we are in a position to take exceptions
- * again, and we could thus set MSR:RI at that point.
- */
-
-/*
- * Exception vectors.
- */
-#define EXCEPTION(n, label, hdlr, xfer)		\
-	. = n;					\
-	DO_KVM n;				\
-label:						\
-	EXCEPTION_PROLOG;			\
-	addi	r3,r1,STACK_FRAME_OVERHEAD;	\
-	xfer(n, hdlr)
-
-#define EXC_XFER_TEMPLATE(n, hdlr, trap, copyee, tfer, ret)	\
-	li	r10,trap;					\
-	stw	r10,_TRAP(r11);					\
-	li	r10,MSR_KERNEL;					\
-	copyee(r10, r9);					\
-	bl	tfer;						\
-i##n:								\
-	.long	hdlr;						\
-	.long	ret
-
-#define COPY_EE(d, s)		rlwimi d,s,0,16,16
-#define NOCOPY(d, s)
-
-#define EXC_XFER_STD(n, hdlr)		\
-	EXC_XFER_TEMPLATE(n, hdlr, n, NOCOPY, transfer_to_handler_full,	\
-			  ret_from_except_full)
-
-#define EXC_XFER_LITE(n, hdlr)		\
-	EXC_XFER_TEMPLATE(n, hdlr, n+1, NOCOPY, transfer_to_handler, \
-			  ret_from_except)
-
-#define EXC_XFER_EE(n, hdlr)		\
-	EXC_XFER_TEMPLATE(n, hdlr, n, COPY_EE, transfer_to_handler_full, \
-			  ret_from_except_full)
-
-#define EXC_XFER_EE_LITE(n, hdlr)	\
-	EXC_XFER_TEMPLATE(n, hdlr, n+1, COPY_EE, transfer_to_handler, \
-			  ret_from_except)
-
 /* System reset */
 /* core99 pmac starts the seconary here by changing the vector, and
    putting it back to what it was (unknown_exception) when done.  */
arch/powerpc/kernel/head_32.h new file +118 -0

118 lines not on this page · raw message

arch/powerpc/kernel/head_8xx.S +2 -96

110 lines not on this page · raw message

Signature · 1 line
2.13.3
#2 lore raw

PATCH v2 2/17 powerpc/32: move LOAD_MSR_KERNEL() into head_32.h and use it

In reply to Christophe Leroy

As preparation for using head_32.h for head_40x.S, move LOAD_MSR_KERNEL() there and use it to load r10 with MSR_KERNEL value.

In the mean time, this patch modifies it so that it takes into account the size of the passed value to determine if 'li' can be used or if 'lis/ori' is needed instead of using the size of MSR_KERNEL. This is done by using gas macro.

---
 arch/powerpc/kernel/entry_32.S |  9 +--------
 arch/powerpc/kernel/head_32.h  | 15 ++++++++++++++-
 2 files changed, 15 insertions(+), 9 deletions(-)
arch/powerpc/kernel/entry_32.S +1 -8
index b61cfd29c76f..0ebbd23b68a9 100644
@@ -37,14 +37,7 @@
 #include <asm/feature-fixups.h>
 #include <asm/barrier.h>
 
-/*
- * MSR_KERNEL is > 0x10000 on 4xx/Book-E since it include MSR_CE.
- */
-#if MSR_KERNEL >= 0x10000
-#define LOAD_MSR_KERNEL(r, x)	lis r,(x)@h; ori r,r,(x)@l
-#else
-#define LOAD_MSR_KERNEL(r, x)	li r,(x)
-#endif
+#include "head_32.h"
 
 /*
  * Align to 4k in order to ensure that all functions modyfing srr0/srr1
arch/powerpc/kernel/head_32.h +14 -1
index 7456e2a45acc..cf3d00844597 100644
@@ -5,6 +5,19 @@
 #include <asm/ptrace.h>	/* for STACK_FRAME_REGS_MARKER */
 
 /*
+ * MSR_KERNEL is > 0x8000 on 4xx/Book-E since it include MSR_CE.
+ */
+.macro __LOAD_MSR_KERNEL r, x
+.if \x >= 0x8000
+	lis \r, (\x)@h
+	ori \r, \r, (\x)@l
+.else
+	li \r, (\x)
+.endif
+.endm
+#define LOAD_MSR_KERNEL(r, x) __LOAD_MSR_KERNEL r, x
+
+/*
  * Exception entry code.  This code runs with address translation
  * turned off, i.e. using physical addresses.
  * We assume sprg3 has the physical address of the current
@@ -89,7 +102,7 @@
 #define EXC_XFER_TEMPLATE(n, hdlr, trap, copyee, tfer, ret)	\
 	li	r10,trap;					\
 	stw	r10,_TRAP(r11);					\
-	li	r10,MSR_KERNEL;					\
+	LOAD_MSR_KERNEL(r10, MSR_KERNEL);			\
 	copyee(r10, r9);					\
 	bl	tfer;						\
 i##n:								\
Signature · 1 line
2.13.3
#3 lore raw

PATCH v2 3/17 powerpc/32: make the 6xx/8xx EXC_XFER_TEMPLATE() similar to the 40x/booke one

In reply to Christophe Leroy

6xx/8xx EXC_XFER_TEMPLATE() macro adds a i##n symbol which is unused and can be removed.
40x and booke EXC_XFER_TEMPLATE() macros takes msr from the caller while the 6xx/8xx version uses only MSR_KERNEL as msr value.

This patch modifies the 6xx/8xx version to make it similar to the 40x and booke versions.

---
 arch/powerpc/kernel/head_32.h | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)
arch/powerpc/kernel/head_32.h +6 -7
index cf3d00844597..985758cbf577 100644
@@ -99,13 +99,12 @@
 	addi	r3,r1,STACK_FRAME_OVERHEAD;	\
 	xfer(n, hdlr)
 
-#define EXC_XFER_TEMPLATE(n, hdlr, trap, copyee, tfer, ret)	\
+#define EXC_XFER_TEMPLATE(hdlr, trap, msr, copyee, tfer, ret)	\
 	li	r10,trap;					\
 	stw	r10,_TRAP(r11);					\
-	LOAD_MSR_KERNEL(r10, MSR_KERNEL);			\
+	LOAD_MSR_KERNEL(r10, msr);				\
 	copyee(r10, r9);					\
 	bl	tfer;						\
-i##n:								\
 	.long	hdlr;						\
 	.long	ret
 
@@ -113,19 +112,19 @@ i##n:								\
 #define NOCOPY(d, s)
 
 #define EXC_XFER_STD(n, hdlr)		\
-	EXC_XFER_TEMPLATE(n, hdlr, n, NOCOPY, transfer_to_handler_full,	\
+	EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, NOCOPY, transfer_to_handler_full,	\
 			  ret_from_except_full)
 
 #define EXC_XFER_LITE(n, hdlr)		\
-	EXC_XFER_TEMPLATE(n, hdlr, n+1, NOCOPY, transfer_to_handler, \
+	EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, NOCOPY, transfer_to_handler, \
 			  ret_from_except)
 
 #define EXC_XFER_EE(n, hdlr)		\
-	EXC_XFER_TEMPLATE(n, hdlr, n, COPY_EE, transfer_to_handler_full, \
+	EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, COPY_EE, transfer_to_handler_full, \
 			  ret_from_except_full)
 
 #define EXC_XFER_EE_LITE(n, hdlr)	\
-	EXC_XFER_TEMPLATE(n, hdlr, n+1, COPY_EE, transfer_to_handler, \
+	EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, COPY_EE, transfer_to_handler, \
 			  ret_from_except)
 
 #endif /* __HEAD_32_H__ */
Signature · 1 line
2.13.3
#4 lore raw

PATCH v2 4/17 powerpc/40x: Don't use SPRN_SPRG_SCRATCH2 in EXCEPTION_PROLOG

In reply to Christophe Leroy

Unlike said in the comment, r1 is not reused by the critical exception handler, as it uses a dedicated critirq_ctx stack. Decrementing r1 early is then unneeded.

Should the above be valid, the code is crap buggy anyway as r1 gets some intermediate values that would jeopardise the
whole process (for instance after mfspr r1,SPRN_SPRG_THREAD)

Using SPRN_SPRG_SCRATCH2 to save r1 is then not needed, r11 can be used instead. This avoids one mtspr and one mfspr and makes the prolog closer to what's done on 6xx and 8xx.

---
 arch/powerpc/kernel/head_40x.S | 21 +++++++++------------
 1 file changed, 9 insertions(+), 12 deletions(-)
arch/powerpc/kernel/head_40x.S +9 -12
index a9c934f2319b..f49b0278e995 100644
@@ -102,23 +102,20 @@ _ENTRY(saved_ksp_limit)
  * Exception vector entry code. This code runs with address translation
  * turned off (i.e. using physical addresses). We assume SPRG_THREAD has
  * the physical address of the current task thread_struct.
- * Note that we have to have decremented r1 before we write to any fields
- * of the exception frame, since a critical interrupt could occur at any
- * time, and it will write to the area immediately below the current r1.
  */
 #define NORMAL_EXCEPTION_PROLOG						     \
 	mtspr	SPRN_SPRG_SCRATCH0,r10;	/* save two registers to work with */\
 	mtspr	SPRN_SPRG_SCRATCH1,r11;					     \
-	mtspr	SPRN_SPRG_SCRATCH2,r1;					     \
 	mfcr	r10;			/* save CR in r10 for now	   */\
 	mfspr	r11,SPRN_SRR1;		/* check whether user or kernel    */\
 	andi.	r11,r11,MSR_PR;						     \
-	beq	1f;							     \
-	mfspr	r1,SPRN_SPRG_THREAD;	/* if from user, start at top of   */\
-	lwz	r1,TASK_STACK-THREAD(r1); /* this thread's kernel stack   */\
-	addi	r1,r1,THREAD_SIZE;					     \
-1:	subi	r1,r1,INT_FRAME_SIZE;	/* Allocate an exception frame     */\
 	tophys(r11,r1);							     \
+	beq	1f;							     \
+	mfspr	r11,SPRN_SPRG_THREAD;	/* if from user, start at top of   */\
+	lwz	r11,TASK_STACK-THREAD(r11); /* this thread's kernel stack */\
+	addi	r11,r11,THREAD_SIZE;					     \
+	tophys(r11,r11);						     \
+1:	subi	r11,r11,INT_FRAME_SIZE;	/* Allocate an exception frame     */\
 	stw	r10,_CCR(r11);          /* save various registers	   */\
 	stw	r12,GPR12(r11);						     \
 	stw	r9,GPR9(r11);						     \
@@ -128,11 +125,11 @@ _ENTRY(saved_ksp_limit)
 	stw	r12,GPR11(r11);						     \
 	mflr	r10;							     \
 	stw	r10,_LINK(r11);						     \
-	mfspr	r10,SPRN_SPRG_SCRATCH2;					     \
 	mfspr	r12,SPRN_SRR0;						     \
-	stw	r10,GPR1(r11);						     \
+	stw	r1,GPR1(r11);						     \
 	mfspr	r9,SPRN_SRR1;						     \
-	stw	r10,0(r11);						     \
+	stw	r1,0(r11);						     \
+	tovirt(r1,r11);			/* set new kernel sp */	\
 	rlwinm	r9,r9,0,14,12;		/* clear MSR_WE (necessary?)	   */\
 	stw	r0,GPR0(r11);						     \
 	SAVE_4GPRS(3, r11);						     \
Signature · 1 line
2.13.3
#5 lore raw

PATCH v2 5/17 powerpc/40x: add exception frame marker

In reply to Christophe Leroy

This patch adds STACK_FRAME_REGS_MARKER in the stack at exception entry in order to see interrupts in call traces as below:

[    0.013964] Call Trace:
[    0.014014] [c0745db0] [c007a9d4] tick_periodic.constprop.5+0xd8/0x104 (unreliable)
[    0.014086] [c0745dc0] [c007aa20] tick_handle_periodic+0x20/0x9c
[    0.014181] [c0745de0] [c0009cd0] timer_interrupt+0xa0/0x264
[    0.014258] [c0745e10] [c000e484] ret_from_except+0x0/0x14
[    0.014390] --- interrupt: 901 at console_unlock.part.7+0x3f4/0x528
[    0.014390]     LR = console_unlock.part.7+0x3f0/0x528
[    0.014455] [c0745ee0] [c0050334] console_unlock.part.7+0x114/0x528 (unreliable)
[    0.014542] [c0745f30] [c00524e0] register_console+0x3d8/0x44c
[    0.014625] [c0745f60] [c0675aac] cpm_uart_console_init+0x18/0x2c
[    0.014709] [c0745f70] [c06614f4] console_init+0x114/0x1cc
[    0.014795] [c0745fb0] [c0658b68] start_kernel+0x300/0x3d8
[    0.014864] [c0745ff0] [c00022cc] start_here+0x44/0x98
---
 arch/powerpc/kernel/head_40x.S | 6 ++++++
 1 file changed, 6 insertions(+)
arch/powerpc/kernel/head_40x.S +6 -0
index f49b0278e995..cb95a5c17cea 100644
@@ -132,6 +132,9 @@ _ENTRY(saved_ksp_limit)
 	tovirt(r1,r11);			/* set new kernel sp */	\
 	rlwinm	r9,r9,0,14,12;		/* clear MSR_WE (necessary?)	   */\
 	stw	r0,GPR0(r11);						     \
+	lis	r10, STACK_FRAME_REGS_MARKER@ha; /* exception frame marker */\
+	addi	r10, r10, STACK_FRAME_REGS_MARKER@l;			     \
+	stw	r10, 8(r11);						     \
 	SAVE_4GPRS(3, r11);						     \
 	SAVE_2GPRS(7, r11)
 
@@ -174,6 +177,9 @@ _ENTRY(saved_ksp_limit)
 	tovirt(r1,r11);							     \
 	rlwinm	r9,r9,0,14,12;		/* clear MSR_WE (necessary?)	   */\
 	stw	r0,GPR0(r11);						     \
+	lis	r10, STACK_FRAME_REGS_MARKER@ha; /* exception frame marker */\
+	addi	r10, r10, STACK_FRAME_REGS_MARKER@l;			     \
+	stw	r10, 8(r11);						     \
 	SAVE_4GPRS(3, r11);						     \
 	SAVE_2GPRS(7, r11)
 
Signature · 1 line
2.13.3
#6 lore raw

PATCH v2 6/17 powerpc/40x: Split and rename NORMAL_EXCEPTION_PROLOG

In reply to Christophe Leroy

This patch splits NORMAL_EXCEPTION_PROLOG in the same way as in head_8xx.S and head_32.S and renames it EXCEPTION_PROLOG() as well to match head_32.h

---
 arch/powerpc/kernel/head_40x.S | 26 ++++++++++++++++----------
 1 file changed, 16 insertions(+), 10 deletions(-)
arch/powerpc/kernel/head_40x.S +16 -10
index cb95a5c17cea..1547750567b6 100644
@@ -103,10 +103,14 @@ _ENTRY(saved_ksp_limit)
  * turned off (i.e. using physical addresses). We assume SPRG_THREAD has
  * the physical address of the current task thread_struct.
  */
-#define NORMAL_EXCEPTION_PROLOG						     \
+#define EXCEPTION_PROLOG						     \
 	mtspr	SPRN_SPRG_SCRATCH0,r10;	/* save two registers to work with */\
 	mtspr	SPRN_SPRG_SCRATCH1,r11;					     \
 	mfcr	r10;			/* save CR in r10 for now	   */\
+	EXCEPTION_PROLOG_1;						     \
+	EXCEPTION_PROLOG_2
+
+#define EXCEPTION_PROLOG_1						     \
 	mfspr	r11,SPRN_SRR1;		/* check whether user or kernel    */\
 	andi.	r11,r11,MSR_PR;						     \
 	tophys(r11,r1);							     \
@@ -115,7 +119,9 @@ _ENTRY(saved_ksp_limit)
 	lwz	r11,TASK_STACK-THREAD(r11); /* this thread's kernel stack */\
 	addi	r11,r11,THREAD_SIZE;					     \
 	tophys(r11,r11);						     \
-1:	subi	r11,r11,INT_FRAME_SIZE;	/* Allocate an exception frame     */\
+1:	subi	r11,r11,INT_FRAME_SIZE	/* Allocate an exception frame     */
+
+#define EXCEPTION_PROLOG_2						     \
 	stw	r10,_CCR(r11);          /* save various registers	   */\
 	stw	r12,GPR12(r11);						     \
 	stw	r9,GPR9(r11);						     \
@@ -205,7 +211,7 @@ label:
 
 #define EXCEPTION(n, label, hdlr, xfer)				\
 	START_EXCEPTION(n, label);				\
-	NORMAL_EXCEPTION_PROLOG;				\
+	EXCEPTION_PROLOG;				\
 	addi	r3,r1,STACK_FRAME_OVERHEAD;			\
 	xfer(n, hdlr)
 
@@ -396,7 +402,7 @@ label:
  * This is caused by a fetch from non-execute or guarded pages.
  */
 	START_EXCEPTION(0x0400, InstructionAccess)
-	NORMAL_EXCEPTION_PROLOG
+	EXCEPTION_PROLOG
 	mr	r4,r12			/* Pass SRR0 as arg2 */
 	li	r5,0			/* Pass zero as arg3 */
 	EXC_XFER_LITE(0x400, handle_page_fault)
@@ -406,7 +412,7 @@ label:
 
 /* 0x0600 - Alignment Exception */
 	START_EXCEPTION(0x0600, Alignment)
-	NORMAL_EXCEPTION_PROLOG
+	EXCEPTION_PROLOG
 	mfspr	r4,SPRN_DEAR		/* Grab the DEAR and save it */
 	stw	r4,_DEAR(r11)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
@@ -414,7 +420,7 @@ label:
 
 /* 0x0700 - Program Exception */
 	START_EXCEPTION(0x0700, ProgramCheck)
-	NORMAL_EXCEPTION_PROLOG
+	EXCEPTION_PROLOG
 	mfspr	r4,SPRN_ESR		/* Grab the ESR and save it */
 	stw	r4,_ESR(r11)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
@@ -427,7 +433,7 @@ label:
 
 /* 0x0C00 - System Call Exception */
 	START_EXCEPTION(0x0C00,	SystemCall)
-	NORMAL_EXCEPTION_PROLOG
+	EXCEPTION_PROLOG
 	EXC_XFER_EE_LITE(0xc00, DoSyscall)
 
 	EXCEPTION(0x0D00, Trap_0D, unknown_exception, EXC_XFER_EE)
@@ -733,7 +739,7 @@ label:
 
 	/* Programmable Interval Timer (PIT) Exception. (from 0x1000) */
 Decrementer:
-	NORMAL_EXCEPTION_PROLOG
+	EXCEPTION_PROLOG
 	lis	r0,TSR_PIS@h
 	mtspr	SPRN_TSR,r0		/* Clear the PIT exception */
 	addi	r3,r1,STACK_FRAME_OVERHEAD
@@ -741,7 +747,7 @@ Decrementer:
 
 	/* Fixed Interval Timer (FIT) Exception. (from 0x1010) */
 FITException:
-	NORMAL_EXCEPTION_PROLOG
+	EXCEPTION_PROLOG
 	addi	r3,r1,STACK_FRAME_OVERHEAD;
 	EXC_XFER_EE(0x1010, unknown_exception)
 
@@ -759,7 +765,7 @@ WDTException:
  * if they can't resolve the lightweight TLB fault.
  */
 DataAccess:
-	NORMAL_EXCEPTION_PROLOG
+	EXCEPTION_PROLOG
 	mfspr	r5,SPRN_ESR		/* Grab the ESR, save it, pass arg3 */
 	stw	r5,_ESR(r11)
 	mfspr	r4,SPRN_DEAR		/* Grab the DEAR, save it, pass arg2 */
Signature · 1 line
2.13.3
#7 lore raw

PATCH v2 7/17 powerpc/40x: Refactor exception entry macros by using head_32.h

In reply to Christophe Leroy

Refactor exception entry macros by using the ones defined in head_32.h

---
 arch/powerpc/kernel/head_32.h  |  4 ++
 arch/powerpc/kernel/head_40x.S | 88 +-----------------------------------------
 2 files changed, 6 insertions(+), 86 deletions(-)
arch/powerpc/kernel/head_32.h +4 -0
index 985758cbf577..aa0131bb09b5 100644
@@ -59,8 +59,12 @@
 	stw	r1,GPR1(r11)
 	stw	r1,0(r11)
 	tovirt(r1,r11)			/* set new kernel sp */
+#ifdef CONFIG_40x
+	rlwinm	r9,r9,0,14,12		/* clear MSR_WE (necessary?) */
+#else
 	li	r10,MSR_KERNEL & ~(MSR_IR|MSR_DR) /* can take exceptions */
 	MTMSRD(r10)			/* (except for mach check in rtas) */
+#endif
 	stw	r0,GPR0(r11)
 	lis	r10,STACK_FRAME_REGS_MARKER@ha /* exception frame marker */
 	addi	r10,r10,STACK_FRAME_REGS_MARKER@l
arch/powerpc/kernel/head_40x.S +2 -86

112 lines not on this page · raw message

Signature · 1 line
2.13.3
#8 lore raw

PATCH v2 8/17 powerpc/fsl_booke: ensure SPEFloatingPointException() reenables interrupts

In reply to Christophe Leroy

SPEFloatingPointException() is the only exception handler which 'forgets' to re-enable interrupts. This patch makes sure it does.

---
 arch/powerpc/kernel/traps.c | 8 ++++++++
 1 file changed, 8 insertions(+)
arch/powerpc/kernel/traps.c +8 -0
index 1fd45a8650e1..665f294725cb 100644
@@ -2088,6 +2088,10 @@ void SPEFloatingPointException(struct pt_regs *regs)
 	int code = FPE_FLTUNK;
 	int err;
 
+	/* We restore the interrupt state now */
+	if (!arch_irq_disabled_regs(regs))
+		local_irq_enable();
+
 	flush_spe_to_thread(current);
 
 	spefscr = current->thread.spefscr;
@@ -2133,6 +2137,10 @@ void SPEFloatingPointRoundException(struct pt_regs *regs)
 	extern int speround_handler(struct pt_regs *regs);
 	int err;
 
+	/* We restore the interrupt state now */
+	if (!arch_irq_disabled_regs(regs))
+		local_irq_enable();
+
 	preempt_disable();
 	if (regs->msr & MSR_SPE)
 		giveup_spe(current);
Signature · 1 line
2.13.3
#9 lore raw

PATCH v2 9/17 powerpc/32: enter syscall with MSR_EE inconditionaly set

In reply to Christophe Leroy

syscalls are expected to be entered with MSR_EE set. Lets make it inconditional by forcing MSR_EE on syscalls.

This patch adds EXC_XFER_SYS for that.

[splited out from benh RFC patch]
---
 arch/powerpc/kernel/head_32.S        | 2 +-
 arch/powerpc/kernel/head_32.h        | 4 ++++
 arch/powerpc/kernel/head_40x.S       | 2 +-
 arch/powerpc/kernel/head_44x.S       | 2 +-
 arch/powerpc/kernel/head_8xx.S       | 2 +-
 arch/powerpc/kernel/head_booke.h     | 4 ++++
 arch/powerpc/kernel/head_fsl_booke.S | 2 +-
 7 files changed, 13 insertions(+), 5 deletions(-)
arch/powerpc/kernel/head_32.S +1 -1
index 577d196c26f2..6e1b0897f5da 100644
@@ -367,7 +367,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_FPU_UNAVAILABLE)
 	DO_KVM  0xc00
 SystemCall:
 	EXCEPTION_PROLOG
-	EXC_XFER_EE_LITE(0xc00, DoSyscall)
+	EXC_XFER_SYS(0xc00, DoSyscall)
 
 /* Single step - not used on 601 */
 	EXCEPTION(0xd00, SingleStep, single_step_exception, EXC_XFER_STD)
arch/powerpc/kernel/head_32.h +4 -0
index aa0131bb09b5..7221418a883f 100644
@@ -123,6 +123,10 @@
 	EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, NOCOPY, transfer_to_handler, \
 			  ret_from_except)
 
+#define EXC_XFER_SYS(n, hdlr)		\
+	EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL | MSR_EE, NOCOPY, transfer_to_handler, \
+			  ret_from_except)
+
 #define EXC_XFER_EE(n, hdlr)		\
 	EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, COPY_EE, transfer_to_handler_full, \
 			  ret_from_except_full)
arch/powerpc/kernel/head_40x.S +1 -1
index cce9bd33a176..1a80a3e45e44 100644
@@ -350,7 +350,7 @@ _ENTRY(saved_ksp_limit)
 /* 0x0C00 - System Call Exception */
 	START_EXCEPTION(0x0C00,	SystemCall)
 	EXCEPTION_PROLOG
-	EXC_XFER_EE_LITE(0xc00, DoSyscall)
+	EXC_XFER_SYS(0xc00, DoSyscall)
 
 	EXCEPTION(0x0D00, Trap_0D, unknown_exception, EXC_XFER_EE)
 	EXCEPTION(0x0E00, Trap_0E, unknown_exception, EXC_XFER_EE)
arch/powerpc/kernel/head_44x.S +1 -1
index 37117ab11584..9cc01948651f 100644
@@ -283,7 +283,7 @@ interrupt_base:
 	/* System Call Interrupt */
 	START_EXCEPTION(SystemCall)
 	NORMAL_EXCEPTION_PROLOG(BOOKE_INTERRUPT_SYSCALL)
-	EXC_XFER_EE_LITE(0x0c00, DoSyscall)
+	EXC_XFER_SYS(0x0c00, DoSyscall)
 
 	/* Auxiliary Processor Unavailable Interrupt */
 	EXCEPTION(0x2020, BOOKE_INTERRUPT_AP_UNAVAIL, \
arch/powerpc/kernel/head_8xx.S +1 -1
index 7b76ad1b9620..19ad6484f198 100644
@@ -186,7 +186,7 @@ Alignment:
 	. = 0xc00
 SystemCall:
 	EXCEPTION_PROLOG
-	EXC_XFER_EE_LITE(0xc00, DoSyscall)
+	EXC_XFER_SYS(0xc00, DoSyscall)
 
 /* Single step - not used on 601 */
 	EXCEPTION(0xd00, SingleStep, single_step_exception, EXC_XFER_STD)
arch/powerpc/kernel/head_booke.h +4 -0
index 1b22a8dea399..612f54ba1125 100644
@@ -251,6 +251,10 @@ END_BTB_FLUSH_SECTION
 	EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, NOCOPY, transfer_to_handler, \
 			  ret_from_except)
 
+#define EXC_XFER_SYS(n, hdlr)						\
+	EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL | MSR_EE, NOCOPY, transfer_to_handler, \
+			  ret_from_except)
+
 #define EXC_XFER_EE(n, hdlr)		\
 	EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, COPY_EE, transfer_to_handler_full, \
 			  ret_from_except_full)
arch/powerpc/kernel/head_fsl_booke.S +1 -1
index 32332e24e421..e77a2ed94642 100644
@@ -411,7 +411,7 @@ interrupt_base:
 	/* System Call Interrupt */
 	START_EXCEPTION(SystemCall)
 	NORMAL_EXCEPTION_PROLOG(SYSCALL)
-	EXC_XFER_EE_LITE(0x0c00, DoSyscall)
+	EXC_XFER_SYS(0x0c00, DoSyscall)
 
 	/* Auxiliary Processor Unavailable Interrupt */
 	EXCEPTION(0x2900, AP_UNAVAIL, AuxillaryProcessorUnavailable, \
Signature · 1 line
2.13.3
#10 lore raw

PATCH v2 10/17 powerpc/32: Enter exceptions with MSR_EE unset

In reply to Christophe Leroy

All exceptions handlers know when to reenable interrupts, so it is safer to enter all of them with MSR_EE unset, except for syscalls.

[splited out from benh RFC patch]
---
 arch/powerpc/kernel/head_32.S        | 68 ++++++++++++++++++------------------
 arch/powerpc/kernel/head_32.h        |  8 -----
 arch/powerpc/kernel/head_40x.S       | 44 +++++++++++------------
 arch/powerpc/kernel/head_44x.S       |  6 ++--
 arch/powerpc/kernel/head_8xx.S       | 32 ++++++++---------
 arch/powerpc/kernel/head_booke.h     | 12 ++-----
 arch/powerpc/kernel/head_fsl_booke.S | 26 +++++++-------
 7 files changed, 90 insertions(+), 106 deletions(-)
arch/powerpc/kernel/head_32.S +34 -34
index 6e1b0897f5da..983480f9547b 100644
@@ -333,7 +333,7 @@ Alignment:
 	mfspr	r5,SPRN_DSISR
 	stw	r5,_DSISR(r11)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_EE(0x600, alignment_exception)
+	EXC_XFER_STD(0x600, alignment_exception)
 
 /* Program check exception */
 	EXCEPTION(0x700, ProgramCheck, program_check_exception, EXC_XFER_STD)
@@ -354,13 +354,13 @@ END_FTR_SECTION_IFSET(CPU_FTR_FPU_UNAVAILABLE)
 	bl	load_up_fpu		/* if from user, just load it up */
 	b	fast_exception_return
 1:	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_EE_LITE(0x800, kernel_fp_unavailable_exception)
+	EXC_XFER_LITE(0x800, kernel_fp_unavailable_exception)
 
 /* Decrementer */
 	EXCEPTION(0x900, Decrementer, timer_interrupt, EXC_XFER_LITE)
 
-	EXCEPTION(0xa00, Trap_0a, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0xb00, Trap_0b, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0xa00, Trap_0a, unknown_exception, EXC_XFER_STD)
+	EXCEPTION(0xb00, Trap_0b, unknown_exception, EXC_XFER_STD)
 
 /* System call */
 	. = 0xc00
@@ -371,7 +371,7 @@ SystemCall:
 
 /* Single step - not used on 601 */
 	EXCEPTION(0xd00, SingleStep, single_step_exception, EXC_XFER_STD)
-	EXCEPTION(0xe00, Trap_0e, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0xe00, Trap_0e, unknown_exception, EXC_XFER_STD)
 
 /*
  * The Altivec unavailable trap is at 0x0f20.  Foo.
@@ -603,35 +603,35 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_NEED_DTLB_SW_LRU)
 #define altivec_assist_exception	unknown_exception
 #endif
 
-	EXCEPTION(0x1300, Trap_13, instruction_breakpoint_exception, EXC_XFER_EE)
-	EXCEPTION(0x1400, SMI, SMIException, EXC_XFER_EE)
-	EXCEPTION(0x1500, Trap_15, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1600, Trap_16, altivec_assist_exception, EXC_XFER_EE)
+	EXCEPTION(0x1300, Trap_13, instruction_breakpoint_exception, EXC_XFER_STD)
+	EXCEPTION(0x1400, SMI, SMIException, EXC_XFER_STD)
+	EXCEPTION(0x1500, Trap_15, unknown_exception, EXC_XFER_STD)
+	EXCEPTION(0x1600, Trap_16, altivec_assist_exception, EXC_XFER_STD)
 	EXCEPTION(0x1700, Trap_17, TAUException, EXC_XFER_STD)
-	EXCEPTION(0x1800, Trap_18, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1900, Trap_19, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1a00, Trap_1a, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1b00, Trap_1b, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1c00, Trap_1c, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1d00, Trap_1d, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1e00, Trap_1e, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1f00, Trap_1f, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2000, RunMode, RunModeException, EXC_XFER_EE)
-	EXCEPTION(0x2100, Trap_21, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2200, Trap_22, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2300, Trap_23, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2400, Trap_24, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2500, Trap_25, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2600, Trap_26, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2700, Trap_27, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2800, Trap_28, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2900, Trap_29, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2a00, Trap_2a, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2b00, Trap_2b, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2c00, Trap_2c, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2d00, Trap_2d, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2e00, Trap_2e, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2f00, Trap_2f, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1800, Trap_18, unknown_exception, EXC_XFER_STD)
+	EXCEPTION(0x1900, Trap_19, unknown_exception, EXC_XFER_STD)
+	EXCEPTION(0x1a00, Trap_1a, unknown_exception, EXC_XFER_STD)
+	EXCEPTION(0x1b00, Trap_1b, unknown_exception, EXC_XFER_STD)
+	EXCEPTION(0x1c00, Trap_1c, unknown_exception, EXC_XFER_STD)
+	EXCEPTION(0x1d00, Trap_1d, unknown_exception, EXC_XFER_STD)
+	EXCEPTION(0x1e00, Trap_1e, unknown_exception, EXC_XFER_STD)
+	EXCEPTION(0x1f00, Trap_1f, unknown_exception, EXC_XFER_STD)
+	EXCEPTION(0x2000, RunMode, RunModeException, EXC_XFER_STD)
+	EXCEPTION(0x2100, Trap_21, unknown_exception, EXC_XFER_STD)
+	EXCEPTION(0x2200, Trap_22, unknown_exception, EXC_XFER_STD)
+	EXCEPTION(0x2300, Trap_23, unknown_exception, EXC_XFER_STD)
+	EXCEPTION(0x2400, Trap_24, unknown_exception, EXC_XFER_STD)
+	EXCEPTION(0x2500, Trap_25, unknown_exception, EXC_XFER_STD)
+	EXCEPTION(0x2600, Trap_26, unknown_exception, EXC_XFER_STD)
+	EXCEPTION(0x2700, Trap_27, unknown_exception, EXC_XFER_STD)
+	EXCEPTION(0x2800, Trap_28, unknown_exception, EXC_XFER_STD)
+	EXCEPTION(0x2900, Trap_29, unknown_exception, EXC_XFER_STD)
+	EXCEPTION(0x2a00, Trap_2a, unknown_exception, EXC_XFER_STD)
+	EXCEPTION(0x2b00, Trap_2b, unknown_exception, EXC_XFER_STD)
+	EXCEPTION(0x2c00, Trap_2c, unknown_exception, EXC_XFER_STD)
+	EXCEPTION(0x2d00, Trap_2d, unknown_exception, EXC_XFER_STD)
+	EXCEPTION(0x2e00, Trap_2e, unknown_exception, EXC_XFER_STD)
+	EXCEPTION(0x2f00, Trap_2f, unknown_exception, EXC_XFER_STD)
 
 	. = 0x3000
 
@@ -643,7 +643,7 @@ AltiVecUnavailable:
 	b	fast_exception_return
 #endif /* CONFIG_ALTIVEC */
 1:	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_EE_LITE(0xf20, altivec_unavailable_exception)
+	EXC_XFER_LITE(0xf20, altivec_unavailable_exception)
 
 PerformanceMonitor:
 	EXCEPTION_PROLOG
arch/powerpc/kernel/head_32.h +0 -8
index 7221418a883f..8881b6887841 100644
@@ -127,12 +127,4 @@
 	EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL | MSR_EE, NOCOPY, transfer_to_handler, \
 			  ret_from_except)
 
-#define EXC_XFER_EE(n, hdlr)		\
-	EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, COPY_EE, transfer_to_handler_full, \
-			  ret_from_except_full)
-
-#define EXC_XFER_EE_LITE(n, hdlr)	\
-	EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, COPY_EE, transfer_to_handler, \
-			  ret_from_except)
-
 #endif /* __HEAD_32_H__ */
arch/powerpc/kernel/head_40x.S +22 -22

80 lines not on this page · raw message

arch/powerpc/kernel/head_44x.S +3 -3
index 9cc01948651f..e06cb1c84951 100644
@@ -278,7 +278,7 @@ interrupt_base:
 	FP_UNAVAILABLE_EXCEPTION
 #else
 	EXCEPTION(0x2010, BOOKE_INTERRUPT_FP_UNAVAIL, \
-		  FloatingPointUnavailable, unknown_exception, EXC_XFER_EE)
+		  FloatingPointUnavailable, unknown_exception, EXC_XFER_STD)
 #endif
 	/* System Call Interrupt */
 	START_EXCEPTION(SystemCall)
@@ -287,7 +287,7 @@ interrupt_base:
 
 	/* Auxiliary Processor Unavailable Interrupt */
 	EXCEPTION(0x2020, BOOKE_INTERRUPT_AP_UNAVAIL, \
-		  AuxillaryProcessorUnavailable, unknown_exception, EXC_XFER_EE)
+		  AuxillaryProcessorUnavailable, unknown_exception, EXC_XFER_STD)
 
 	/* Decrementer Interrupt */
 	DECREMENTER_EXCEPTION
@@ -295,7 +295,7 @@ interrupt_base:
 	/* Fixed Internal Timer Interrupt */
 	/* TODO: Add FIT support */
 	EXCEPTION(0x1010, BOOKE_INTERRUPT_FIT, FixedIntervalTimer, \
-		  unknown_exception, EXC_XFER_EE)
+		  unknown_exception, EXC_XFER_STD)
 
 	/* Watchdog Timer Interrupt */
 	/* TODO: Add watchdog support */
arch/powerpc/kernel/head_8xx.S +16 -16
index 19ad6484f198..4ebcdfdae920 100644
@@ -167,7 +167,7 @@ Alignment:
 	mfspr	r5,SPRN_DSISR
 	stw	r5,_DSISR(r11)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_EE(0x600, alignment_exception)
+	EXC_XFER_STD(0x600, alignment_exception)
 
 /* Program check exception */
 	EXCEPTION(0x700, ProgramCheck, program_check_exception, EXC_XFER_STD)
@@ -179,8 +179,8 @@ Alignment:
 /* Decrementer */
 	EXCEPTION(0x900, Decrementer, timer_interrupt, EXC_XFER_LITE)
 
-	EXCEPTION(0xa00, Trap_0a, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0xb00, Trap_0b, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0xa00, Trap_0a, unknown_exception, EXC_XFER_STD)
+	EXCEPTION(0xb00, Trap_0b, unknown_exception, EXC_XFER_STD)
 
 /* System call */
 	. = 0xc00
@@ -190,8 +190,8 @@ SystemCall:
 
 /* Single step - not used on 601 */
 	EXCEPTION(0xd00, SingleStep, single_step_exception, EXC_XFER_STD)
-	EXCEPTION(0xe00, Trap_0e, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0xf00, Trap_0f, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0xe00, Trap_0e, unknown_exception, EXC_XFER_STD)
+	EXCEPTION(0xf00, Trap_0f, unknown_exception, EXC_XFER_STD)
 
 /* On the MPC8xx, this is a software emulation interrupt.  It occurs
  * for all unimplemented and illegal instructions.
@@ -521,13 +521,13 @@ DARFixed:/* Return from dcbx instruction bug workaround */
 	/* 0x300 is DataAccess exception, needed by bad_page_fault() */
 	EXC_XFER_LITE(0x300, handle_page_fault)
 
-	EXCEPTION(0x1500, Trap_15, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1600, Trap_16, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1700, Trap_17, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1800, Trap_18, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1900, Trap_19, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1a00, Trap_1a, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1b00, Trap_1b, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1500, Trap_15, unknown_exception, EXC_XFER_STD)
+	EXCEPTION(0x1600, Trap_16, unknown_exception, EXC_XFER_STD)
+	EXCEPTION(0x1700, Trap_17, unknown_exception, EXC_XFER_STD)
+	EXCEPTION(0x1800, Trap_18, unknown_exception, EXC_XFER_STD)
+	EXCEPTION(0x1900, Trap_19, unknown_exception, EXC_XFER_STD)
+	EXCEPTION(0x1a00, Trap_1a, unknown_exception, EXC_XFER_STD)
+	EXCEPTION(0x1b00, Trap_1b, unknown_exception, EXC_XFER_STD)
 
 /* On the MPC8xx, these next four traps are used for development
  * support of breakpoints and such.  Someday I will get around to
@@ -549,7 +549,7 @@ DataBreakpoint:
 	mfspr	r4,SPRN_BAR
 	stw	r4,_DAR(r11)
 	mfspr	r5,SPRN_DSISR
-	EXC_XFER_EE(0x1c00, do_break)
+	EXC_XFER_STD(0x1c00, do_break)
 11:
 	mtcr	r10
 	mfspr	r10, SPRN_SPRG_SCRATCH0
@@ -569,10 +569,10 @@ InstructionBreakpoint:
 	mfspr	r10, SPRN_SPRG_SCRATCH0
 	rfi
 #else
-	EXCEPTION(0x1d00, Trap_1d, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1d00, Trap_1d, unknown_exception, EXC_XFER_STD)
 #endif
-	EXCEPTION(0x1e00, Trap_1e, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1f00, Trap_1f, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1e00, Trap_1e, unknown_exception, EXC_XFER_STD)
+	EXCEPTION(0x1f00, Trap_1f, unknown_exception, EXC_XFER_STD)
 
 	. = 0x2000
 
arch/powerpc/kernel/head_booke.h +2 -10
index 612f54ba1125..264976c43f34 100644
@@ -255,14 +255,6 @@ END_BTB_FLUSH_SECTION
 	EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL | MSR_EE, NOCOPY, transfer_to_handler, \
 			  ret_from_except)
 
-#define EXC_XFER_EE(n, hdlr)		\
-	EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, COPY_EE, transfer_to_handler_full, \
-			  ret_from_except_full)
-
-#define EXC_XFER_EE_LITE(n, hdlr)	\
-	EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, COPY_EE, transfer_to_handler, \
-			  ret_from_except)
-
 /* Check for a single step debug exception while in an exception
  * handler before state has been saved.  This is to catch the case
  * where an instruction that we are trying to single step causes
@@ -405,7 +397,7 @@ END_BTB_FLUSH_SECTION
 	mfspr   r4,SPRN_DEAR;           /* Grab the DEAR and save it */	      \
 	stw     r4,_DEAR(r11);						      \
 	addi    r3,r1,STACK_FRAME_OVERHEAD;				      \
-	EXC_XFER_EE(0x0600, alignment_exception)
+	EXC_XFER_STD(0x0600, alignment_exception)
 
 #define PROGRAM_EXCEPTION						      \
 	START_EXCEPTION(Program)					      \
@@ -430,7 +422,7 @@ END_BTB_FLUSH_SECTION
 	bl	load_up_fpu;		/* if from user, just load it up */   \
 	b	fast_exception_return;					      \
 1:	addi	r3,r1,STACK_FRAME_OVERHEAD;				      \
-	EXC_XFER_EE_LITE(0x800, kernel_fp_unavailable_exception)
+	EXC_XFER_STD(0x800, kernel_fp_unavailable_exception)
 
 #ifndef __ASSEMBLY__
 struct exception_regs {
arch/powerpc/kernel/head_fsl_booke.S +13 -13
index e77a2ed94642..b351851dc73d 100644
@@ -380,7 +380,7 @@ interrupt_base:
 	EXC_XFER_LITE(0x0300, handle_page_fault)
 1:
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_EE_LITE(0x0300, CacheLockingException)
+	EXC_XFER_LITE(0x0300, CacheLockingException)
 
 	/* Instruction Storage Interrupt */
 	INSTRUCTION_STORAGE_EXCEPTION
@@ -401,10 +401,10 @@ interrupt_base:
 #ifdef CONFIG_E200
 	/* E200 treats 'normal' floating point instructions as FP Unavail exception */
 	EXCEPTION(0x0800, FP_UNAVAIL, FloatingPointUnavailable, \
-		  program_check_exception, EXC_XFER_EE)
+		  program_check_exception, EXC_XFER_STD)
 #else
 	EXCEPTION(0x0800, FP_UNAVAIL, FloatingPointUnavailable, \
-		  unknown_exception, EXC_XFER_EE)
+		  unknown_exception, EXC_XFER_STD)
 #endif
 #endif
 
@@ -415,7 +415,7 @@ interrupt_base:
 
 	/* Auxiliary Processor Unavailable Interrupt */
 	EXCEPTION(0x2900, AP_UNAVAIL, AuxillaryProcessorUnavailable, \
-		  unknown_exception, EXC_XFER_EE)
+		  unknown_exception, EXC_XFER_STD)
 
 	/* Decrementer Interrupt */
 	DECREMENTER_EXCEPTION
@@ -423,7 +423,7 @@ interrupt_base:
 	/* Fixed Internal Timer Interrupt */
 	/* TODO: Add FIT support */
 	EXCEPTION(0x3100, FIT, FixedIntervalTimer, \
-		  unknown_exception, EXC_XFER_EE)
+		  unknown_exception, EXC_XFER_STD)
 
 	/* Watchdog Timer Interrupt */
 #ifdef CONFIG_BOOKE_WDT
@@ -633,25 +633,25 @@ END_BTB_FLUSH_SECTION
 	bl	load_up_spe
 	b	fast_exception_return
 1:	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_EE_LITE(0x2010, KernelSPE)
+	EXC_XFER_LITE(0x2010, KernelSPE)
 #elif defined(CONFIG_SPE_POSSIBLE)
 	EXCEPTION(0x2020, SPE_UNAVAIL, SPEUnavailable, \
-		  unknown_exception, EXC_XFER_EE)
+		  unknown_exception, EXC_XFER_STD)
 #endif /* CONFIG_SPE_POSSIBLE */
 
 	/* SPE Floating Point Data */
 #ifdef CONFIG_SPE
 	EXCEPTION(0x2030, SPE_FP_DATA, SPEFloatingPointData,
-		  SPEFloatingPointException, EXC_XFER_EE)
+		  SPEFloatingPointException, EXC_XFER_STD)
 
 	/* SPE Floating Point Round */
 	EXCEPTION(0x2050, SPE_FP_ROUND, SPEFloatingPointRound, \
-		  SPEFloatingPointRoundException, EXC_XFER_EE)
+		  SPEFloatingPointRoundException, EXC_XFER_STD)
 #elif defined(CONFIG_SPE_POSSIBLE)
 	EXCEPTION(0x2040, SPE_FP_DATA, SPEFloatingPointData,
-		  unknown_exception, EXC_XFER_EE)
+		  unknown_exception, EXC_XFER_STD)
 	EXCEPTION(0x2050, SPE_FP_ROUND, SPEFloatingPointRound, \
-		  unknown_exception, EXC_XFER_EE)
+		  unknown_exception, EXC_XFER_STD)
 #endif /* CONFIG_SPE_POSSIBLE */
 
 
@@ -674,10 +674,10 @@ END_BTB_FLUSH_SECTION
 			   unknown_exception)
 
 	/* Hypercall */
-	EXCEPTION(0, HV_SYSCALL, Hypercall, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0, HV_SYSCALL, Hypercall, unknown_exception, EXC_XFER_STD)
 
 	/* Embedded Hypervisor Privilege */
-	EXCEPTION(0, HV_PRIV, Ehvpriv, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0, HV_PRIV, Ehvpriv, unknown_exception, EXC_XFER_STD)
 
 interrupt_end:
 
Signature · 1 line
2.13.3
#11 lore raw

PATCH v2 11/17 powerpc/32: get rid of COPY_EE in exception entry

In reply to Christophe Leroy

EXC_XFER_TEMPLATE() is not called with COPY_EE anymore so we can get rid of copyee parameters and related COPY_EE and NOCOPY macros.

[splited out from benh RFC patch]
---
 arch/powerpc/kernel/head_32.h    | 12 ++++--------
 arch/powerpc/kernel/head_40x.S   |  8 +++-----
 arch/powerpc/kernel/head_booke.h | 22 ++++++++--------------
 3 files changed, 15 insertions(+), 27 deletions(-)
arch/powerpc/kernel/head_32.h +4 -8
index 8881b6887841..14cb0af2f494 100644
@@ -103,28 +103,24 @@
 	addi	r3,r1,STACK_FRAME_OVERHEAD;	\
 	xfer(n, hdlr)
 
-#define EXC_XFER_TEMPLATE(hdlr, trap, msr, copyee, tfer, ret)	\
+#define EXC_XFER_TEMPLATE(hdlr, trap, msr, tfer, ret)		\
 	li	r10,trap;					\
 	stw	r10,_TRAP(r11);					\
 	LOAD_MSR_KERNEL(r10, msr);				\
-	copyee(r10, r9);					\
 	bl	tfer;						\
 	.long	hdlr;						\
 	.long	ret
 
-#define COPY_EE(d, s)		rlwimi d,s,0,MSR_EE
-#define NOCOPY(d, s)
-
 #define EXC_XFER_STD(n, hdlr)		\
-	EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, NOCOPY, transfer_to_handler_full,	\
+	EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, transfer_to_handler_full,	\
 			  ret_from_except_full)
 
 #define EXC_XFER_LITE(n, hdlr)		\
-	EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, NOCOPY, transfer_to_handler, \
+	EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, transfer_to_handler, \
 			  ret_from_except)
 
 #define EXC_XFER_SYS(n, hdlr)		\
-	EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL | MSR_EE, NOCOPY, transfer_to_handler, \
+	EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL | MSR_EE, transfer_to_handler, \
 			  ret_from_except)
 
 #endif /* __HEAD_32_H__ */
arch/powerpc/kernel/head_40x.S +3 -5
index 71597fb7cd89..b68de183faf1 100644
@@ -166,8 +166,7 @@ _ENTRY(saved_ksp_limit)
 	CRITICAL_EXCEPTION_PROLOG;				\
 	addi	r3,r1,STACK_FRAME_OVERHEAD;			\
 	EXC_XFER_TEMPLATE(hdlr, n+2, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
-			  NOCOPY, crit_transfer_to_handler,	\
-			  ret_from_crit_exc)
+			  crit_transfer_to_handler, ret_from_crit_exc)
 
 /*
  * 0x0100 - Critical Interrupt Exception
@@ -651,7 +650,7 @@ _ENTRY(saved_ksp_limit)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	EXC_XFER_TEMPLATE(DebugException, 0x2002, \
 		(MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
-		NOCOPY, crit_transfer_to_handler, ret_from_crit_exc)
+		crit_transfer_to_handler, ret_from_crit_exc)
 
 	/* Programmable Interval Timer (PIT) Exception. (from 0x1000) */
 Decrementer:
@@ -673,8 +672,7 @@ WDTException:
 	addi	r3,r1,STACK_FRAME_OVERHEAD;
 	EXC_XFER_TEMPLATE(WatchdogException, 0x1020+2,
 	                  (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)),
-			  NOCOPY, crit_transfer_to_handler,
-			  ret_from_crit_exc)
+			  crit_transfer_to_handler, ret_from_crit_exc)
 
 /*
  * The other Data TLB exceptions bail out to this point
arch/powerpc/kernel/head_booke.h +8 -14
index 264976c43f34..56dd1341eb3d 100644
@@ -217,8 +217,7 @@ END_BTB_FLUSH_SECTION
 	CRITICAL_EXCEPTION_PROLOG(intno);				\
 	addi	r3,r1,STACK_FRAME_OVERHEAD;				\
 	EXC_XFER_TEMPLATE(hdlr, n+2, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
-			  NOCOPY, crit_transfer_to_handler, \
-			  ret_from_crit_exc)
+			  crit_transfer_to_handler, ret_from_crit_exc)
 
 #define MCHECK_EXCEPTION(n, label, hdlr)			\
 	START_EXCEPTION(label);					\
@@ -227,32 +226,27 @@ END_BTB_FLUSH_SECTION
 	stw	r5,_ESR(r11);					\
 	addi	r3,r1,STACK_FRAME_OVERHEAD;			\
 	EXC_XFER_TEMPLATE(hdlr, n+4, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
-			  NOCOPY, mcheck_transfer_to_handler,   \
-			  ret_from_mcheck_exc)
+			  mcheck_transfer_to_handler, ret_from_mcheck_exc)
 
-#define EXC_XFER_TEMPLATE(hdlr, trap, msr, copyee, tfer, ret)	\
+#define EXC_XFER_TEMPLATE(hdlr, trap, msr, tfer, ret)	\
 	li	r10,trap;					\
 	stw	r10,_TRAP(r11);					\
 	lis	r10,msr@h;					\
 	ori	r10,r10,msr@l;					\
-	copyee(r10, r9);					\
 	bl	tfer;		 				\
 	.long	hdlr;						\
 	.long	ret
 
-#define COPY_EE(d, s)		rlwimi d,s,0,16,16
-#define NOCOPY(d, s)
-
 #define EXC_XFER_STD(n, hdlr)		\
-	EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, NOCOPY, transfer_to_handler_full, \
+	EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, transfer_to_handler_full, \
 			  ret_from_except_full)
 
 #define EXC_XFER_LITE(n, hdlr)		\
-	EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, NOCOPY, transfer_to_handler, \
+	EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, transfer_to_handler, \
 			  ret_from_except)
 
 #define EXC_XFER_SYS(n, hdlr)						\
-	EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL | MSR_EE, NOCOPY, transfer_to_handler, \
+	EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL | MSR_EE, transfer_to_handler, \
 			  ret_from_except)
 
 /* Check for a single step debug exception while in an exception
@@ -319,7 +313,7 @@ END_BTB_FLUSH_SECTION
 	/* continue normal handling for a debug exception... */		      \
 2:	mfspr	r4,SPRN_DBSR;						      \
 	addi	r3,r1,STACK_FRAME_OVERHEAD;				      \
-	EXC_XFER_TEMPLATE(DebugException, 0x2008, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), NOCOPY, debug_transfer_to_handler, ret_from_debug_exc)
+	EXC_XFER_TEMPLATE(DebugException, 0x2008, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), debug_transfer_to_handler, ret_from_debug_exc)
 
 #define DEBUG_CRIT_EXCEPTION						      \
 	START_EXCEPTION(DebugCrit);					      \
@@ -372,7 +366,7 @@ END_BTB_FLUSH_SECTION
 	/* continue normal handling for a critical exception... */	      \
 2:	mfspr	r4,SPRN_DBSR;						      \
 	addi	r3,r1,STACK_FRAME_OVERHEAD;				      \
-	EXC_XFER_TEMPLATE(DebugException, 0x2002, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), NOCOPY, crit_transfer_to_handler, ret_from_crit_exc)
+	EXC_XFER_TEMPLATE(DebugException, 0x2002, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), crit_transfer_to_handler, ret_from_crit_exc)
 
 #define DATA_STORAGE_EXCEPTION						      \
 	START_EXCEPTION(DataStorage)					      \
Signature · 1 line
2.13.3
#12 lore raw

PATCH v2 12/17 powerpc: Fix 32-bit handling of MSR_EE on exceptions

In reply to Christophe Leroy

[text mostly copied from benh's RFC/WIP]

ppc32 are still doing something rather gothic and wrong on 32-bit which we stopped doing on 64-bit a while ago.

We have that thing where some handlers "copy" the EE value from the original stack frame into the new MSR before transferring to the handler.

Thus for a number of exceptions, we enter the handlers with interrupts enabled.

This is rather fishy, some of the stuff that handlers might do early on such as irq_enter/exit or user_exit, context tracking, etc... should be run with interrupts off afaik.

Generally our handlers know when to re-enable interrupts if needed.

The problem we were having is that we assumed these interrupts would return with interrupts enabled. However that isn't the case.

Instead, this patch changes things so that we always enter exception handlers with interrupts *off* with the notable exception of syscalls which are special (and get a fast path).

---
 arch/powerpc/kernel/entry_32.S | 116 ++++++++++++++++++++++++-----------------
 1 file changed, 67 insertions(+), 49 deletions(-)
arch/powerpc/kernel/entry_32.S +67 -49
index 0ebbd23b68a9..00481116391d 100644
@@ -36,6 +36,7 @@
 #include <asm/asm-405.h>
 #include <asm/feature-fixups.h>
 #include <asm/barrier.h>
+#include <asm/bug.h>
 
 #include "head_32.h"
 
@@ -200,19 +201,42 @@ transfer_to_handler_cont:
 	mtspr	SPRN_NRI, r0
 #endif
 #ifdef CONFIG_TRACE_IRQFLAGS
+	/*
+	 * When tracing IRQ state (lockdep) we enable the MMU before we call
+	 * the IRQ tracing functions as they might access vmalloc space or
+	 * perform IOs for console output.
+	 *
+	 * To speed up the syscall path where interrupts stay on, let's check
+	 * first if we are changing the MSR value at all.
+	 */
+	tophys(r12, r1)
+	lwz	r12,_MSR(r12)
+	xor	r12,r10,r12
+	andi.	r12,r12,MSR_EE
+	bne	1f
+
+	/* MSR isn't changing, just transition directly */
+#endif
+	mtspr	SPRN_SRR0,r11
+	mtspr	SPRN_SRR1,r10
+	mtlr	r9
+	SYNC
+	RFI				/* jump to handler, enable MMU */
+
+#ifdef CONFIG_TRACE_IRQFLAGS
+1:	/* MSR is changing, re-enable MMU so we can notify lockdep. We need to
+	 * keep interrupts disabled at this point otherwise we might risk
+	 * taking an interrupt before we tell lockdep they are enabled.
+	 */
 	lis	r12,reenable_mmu@h
 	ori	r12,r12,reenable_mmu@l
+	LOAD_MSR_KERNEL(r0, MSR_KERNEL)
 	mtspr	SPRN_SRR0,r12
-	mtspr	SPRN_SRR1,r10
+	mtspr	SPRN_SRR1,r0
 	SYNC
 	RFI
-reenable_mmu:				/* re-enable mmu so we can */
-	mfmsr	r10
-	lwz	r12,_MSR(r1)
-	xor	r10,r10,r12
-	andi.	r10,r10,MSR_EE		/* Did EE change? */
-	beq	1f
 
+reenable_mmu:
 	/*
 	 * The trace_hardirqs_off will use CALLER_ADDR0 and CALLER_ADDR1.
 	 * If from user mode there is only one stack frame on the stack, and
@@ -227,14 +251,24 @@ reenable_mmu:				/* re-enable mmu so we can */
 	 * they aren't useful past this point (aren't syscall arguments),
 	 * the rest is restored from the exception frame.
 	 */
+
+	/* Are we enabling or disabling interrupts ? */
+	andi.	r0,r10,MSR_EE
+
 	stwu	r1,-32(r1)
 	stw	r9,8(r1)
 	stw	r11,12(r1)
 	stw	r3,16(r1)
 	stw	r4,20(r1)
 	stw	r5,24(r1)
-	bl	trace_hardirqs_off
-	lwz	r5,24(r1)
+
+	bne-	0f
+
+	/* If we are disabling interrupts (normal case), simply log it with
+	 * lockdep
+	 */
+1:	bl	trace_hardirqs_off
+2:	lwz	r5,24(r1)
 	lwz	r4,20(r1)
 	lwz	r3,16(r1)
 	lwz	r11,12(r1)
@@ -244,15 +278,22 @@ reenable_mmu:				/* re-enable mmu so we can */
 	lwz	r6,GPR6(r1)
 	lwz	r7,GPR7(r1)
 	lwz	r8,GPR8(r1)
-1:	mtctr	r11
+	mtctr	r11
 	mtlr	r9
 	bctr				/* jump to handler */
-#else /* CONFIG_TRACE_IRQFLAGS */
-	mtspr	SPRN_SRR0,r11
-	mtspr	SPRN_SRR1,r10
-	mtlr	r9
-	SYNC
-	RFI				/* jump to handler, enable MMU */
+
+	/* If we are enabling interrupt, this is a syscall. They shouldn't
+	 * happen while interrupts are disabled, so let's do a warning here.
+	 */
+0:	trap
+	EMIT_BUG_ENTRY 0b,__FILE__,__LINE__, BUGFLAG_WARNING
+	bl	trace_hardirqs_on
+
+	/* Now enable for real */
+	mfmsr	r10
+	ori	r10,r10,MSR_EE
+	mtmsr	r10
+	b	2b
 #endif /* CONFIG_TRACE_IRQFLAGS */
 
 #if defined (CONFIG_PPC_BOOK3S_32) || defined(CONFIG_E500)
@@ -309,29 +350,13 @@ _GLOBAL(DoSyscall)
 	rlwinm	r11,r11,0,4,2
 	stw	r11,_CCR(r1)
 #ifdef CONFIG_TRACE_IRQFLAGS
-	/* Return from syscalls can (and generally will) hard enable
-	 * interrupts. You aren't supposed to call a syscall with
-	 * interrupts disabled in the first place. However, to ensure
-	 * that we get it right vs. lockdep if it happens, we force
-	 * that hard enable here with appropriate tracing if we see
-	 * that we have been called with interrupts off
-	 */
+	/* Make sure interrupts are enabled */
 	mfmsr	r11
 	andi.	r12,r11,MSR_EE
-	bne+	1f
-	/* We came in with interrupts disabled, we enable them now */
-	bl	trace_hardirqs_on
-	mfmsr	r11
-	lwz	r0,GPR0(r1)
-	lwz	r3,GPR3(r1)
-	lwz	r4,GPR4(r1)
-	ori	r11,r11,MSR_EE
-	lwz	r5,GPR5(r1)
-	lwz	r6,GPR6(r1)
-	lwz	r7,GPR7(r1)
-	lwz	r8,GPR8(r1)
-	mtmsr	r11
-1:
+	/* We came in with interrupts disabled, we WARN and mark them enabled
+	 * for lockdep now */
+0:	tweqi	r12, 0
+	EMIT_BUG_ENTRY 0b,__FILE__,__LINE__, BUGFLAG_WARNING
 #endif /* CONFIG_TRACE_IRQFLAGS */
 	lwz	r11,TI_FLAGS(r2)
 	andi.	r11,r11,_TIF_SYSCALL_DOTRACE
@@ -385,8 +410,7 @@ syscall_exit_cont:
 	lwz	r8,_MSR(r1)
 #ifdef CONFIG_TRACE_IRQFLAGS
 	/* If we are going to return from the syscall with interrupts
-	 * off, we trace that here. It shouldn't happen though but we
-	 * want to catch the bugger if it does right ?
+	 * off, we trace that here. It shouldn't normally happen.
 	 */
 	andi.	r10,r8,MSR_EE
 	bne+	1f
@@ -906,13 +930,6 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_47x)
 	 * off in this assembly code while peeking at TI_FLAGS() and such. However
 	 * we need to inform it if the exception turned interrupts off, and we
 	 * are about to trun them back on.
-	 *
-	 * The problem here sadly is that we don't know whether the exceptions was
-	 * one that turned interrupts off or not. So we always tell lockdep about
-	 * turning them on here when we go back to wherever we came from with EE
-	 * on, even if that may meen some redudant calls being tracked. Maybe later
-	 * we could encode what the exception did somewhere or test the exception
-	 * type in the pt_regs but that sounds overkill
 	 */
 	andi.	r10,r9,MSR_EE
 	beq	1f
@@ -1200,9 +1217,10 @@ do_work:			/* r10 contains MSR_KERNEL here */
 	beq	do_user_signal
 
 do_resched:			/* r10 contains MSR_KERNEL here */
-	/* Note: We don't need to inform lockdep that we are enabling
-	 * interrupts here. As far as it knows, they are already enabled
-	 */
+#ifdef CONFIG_TRACE_IRQFLAGS
+	bl	trace_hardirqs_on
+	mfmsr	r10
+#endif
 	ori	r10,r10,MSR_EE
 	SYNC
 	MTMSRD(r10)		/* hard-enable interrupts */
Signature · 1 line
2.13.3
#13 lore raw

PATCH v2 13/17 powerpc/32: implement fast entry for syscalls on non BOOKE

In reply to Christophe Leroy

This patch implements a fast entry for syscalls.

Syscalls don't have to preserve non volatile registers except LR.

This patch then implement a fast entry for syscalls, where volatile registers get clobbered.

As this entry is dedicated to syscall it always sets MSR_EE and warns in case MSR_EE was previously off

It also assumes that the call is always from user, system calls are unexpected from kernel.

The overall series improves null_syscall selftest by 12,5% on an 83xx and by 17% on a 8xx.

---
 arch/powerpc/kernel/entry_32.S | 32 ++++++++++++++++
 arch/powerpc/kernel/head_32.S  |  3 +-
 arch/powerpc/kernel/head_32.h  | 85 ++++++++++++++++++++++++++++++++++++++++--
 arch/powerpc/kernel/head_40x.S |  3 +-
 arch/powerpc/kernel/head_8xx.S |  3 +-
 5 files changed, 116 insertions(+), 10 deletions(-)
arch/powerpc/kernel/entry_32.S +32 -0
index 00481116391d..71a101600428 100644
@@ -335,6 +335,35 @@ stack_ovf:
 	SYNC
 	RFI
 
+#ifndef CONFIG_BOOKE	/* to be removed once BOOKE uses fast syscall entry */
+#ifdef CONFIG_TRACE_IRQFLAGS
+trace_syscall_entry_irq_off:
+	/*
+	 * Syscall shouldn't happen while interrupts are disabled,
+	 * so let's do a warning here.
+	 */
+0:	trap
+	EMIT_BUG_ENTRY 0b,__FILE__,__LINE__, BUGFLAG_WARNING
+	bl	trace_hardirqs_on
+
+	/* Now enable for real */
+	LOAD_MSR_KERNEL(r10, MSR_KERNEL | MSR_EE)
+	mtmsr	r10
+
+	REST_GPR(0, r1)
+	REST_4GPRS(3, r1)
+	REST_2GPRS(7, r1)
+	b	DoSyscall
+#endif /* CONFIG_TRACE_IRQFLAGS */
+
+	.globl	transfer_to_syscall
+transfer_to_syscall:
+#ifdef CONFIG_TRACE_IRQFLAGS
+	andi.	r12,r9,MSR_EE
+	beq-	trace_syscall_entry_irq_off
+#endif /* CONFIG_TRACE_IRQFLAGS */
+#endif /* !CONFIG_BOOKE */
+
 /*
  * Handle a system call.
  */
@@ -346,9 +375,11 @@ _GLOBAL(DoSyscall)
 	stw	r3,ORIG_GPR3(r1)
 	li	r12,0
 	stw	r12,RESULT(r1)
+#ifdef CONFIG_BOOKE	/* to be removed once BOOKE uses fast syscall entry */
 	lwz	r11,_CCR(r1)	/* Clear SO bit in CR */
 	rlwinm	r11,r11,0,4,2
 	stw	r11,_CCR(r1)
+#endif
 #ifdef CONFIG_TRACE_IRQFLAGS
 	/* Make sure interrupts are enabled */
 	mfmsr	r11
@@ -1207,6 +1238,7 @@ load_dbcr0:
 
 	.section .bss
 	.align	4
+	.global global_dbcr0
 global_dbcr0:
 	.space	8*NR_CPUS
 	.previous
arch/powerpc/kernel/head_32.S +1 -2
index 983480f9547b..7309f52002c2 100644
@@ -366,8 +366,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_FPU_UNAVAILABLE)
 	. = 0xc00
 	DO_KVM  0xc00
 SystemCall:
-	EXCEPTION_PROLOG
-	EXC_XFER_SYS(0xc00, DoSyscall)
+	SYSCALL_ENTRY	0xc00
 
 /* Single step - not used on 601 */
 	EXCEPTION(0xd00, SingleStep, single_step_exception, EXC_XFER_STD)
arch/powerpc/kernel/head_32.h +81 -4

95 lines not on this page · raw message

arch/powerpc/kernel/head_40x.S +1 -2
index b68de183faf1..e115248edda1 100644
@@ -348,8 +348,7 @@ _ENTRY(saved_ksp_limit)
 
 /* 0x0C00 - System Call Exception */
 	START_EXCEPTION(0x0C00,	SystemCall)
-	EXCEPTION_PROLOG
-	EXC_XFER_SYS(0xc00, DoSyscall)
+	SYSCALL_ENTRY	0xc00
 
 	EXCEPTION(0x0D00, Trap_0D, unknown_exception, EXC_XFER_STD)
 	EXCEPTION(0x0E00, Trap_0E, unknown_exception, EXC_XFER_STD)
arch/powerpc/kernel/head_8xx.S +1 -2
index 4ebcdfdae920..a5826defad1f 100644
@@ -185,8 +185,7 @@ Alignment:
 /* System call */
 	. = 0xc00
 SystemCall:
-	EXCEPTION_PROLOG
-	EXC_XFER_SYS(0xc00, DoSyscall)
+	SYSCALL_ENTRY	0xc00
 
 /* Single step - not used on 601 */
 	EXCEPTION(0xd00, SingleStep, single_step_exception, EXC_XFER_STD)
Signature · 1 line
2.13.3
#14 lore raw

PATCH v2 14/17 powerpc/32: implement fast entry for syscalls on BOOKE

In reply to Christophe Leroy

This patch implements a fast entry for syscalls.

Syscalls don't have to preserve non volatile registers except LR.

This patch then implement a fast entry for syscalls, where volatile registers get clobbered.

As this entry is dedicated to syscall it always sets MSR_EE and warns in case MSR_EE was previously off

It also assumes that the call is always from user, system calls are unexpected from kernel.

---
 arch/powerpc/kernel/entry_32.S       |   7 ---
 arch/powerpc/kernel/head_44x.S       |   3 +-
 arch/powerpc/kernel/head_booke.h     | 103 +++++++++++++++++++++++++++++++++--
 arch/powerpc/kernel/head_fsl_booke.S |   3 +-
 4 files changed, 100 insertions(+), 16 deletions(-)
arch/powerpc/kernel/entry_32.S +0 -7
index 71a101600428..5f52a71c2838 100644
@@ -335,7 +335,6 @@ stack_ovf:
 	SYNC
 	RFI
 
-#ifndef CONFIG_BOOKE	/* to be removed once BOOKE uses fast syscall entry */
 #ifdef CONFIG_TRACE_IRQFLAGS
 trace_syscall_entry_irq_off:
 	/*
@@ -362,7 +361,6 @@ transfer_to_syscall:
 	andi.	r12,r9,MSR_EE
 	beq-	trace_syscall_entry_irq_off
 #endif /* CONFIG_TRACE_IRQFLAGS */
-#endif /* !CONFIG_BOOKE */
 
 /*
  * Handle a system call.
@@ -375,11 +373,6 @@ _GLOBAL(DoSyscall)
 	stw	r3,ORIG_GPR3(r1)
 	li	r12,0
 	stw	r12,RESULT(r1)
-#ifdef CONFIG_BOOKE	/* to be removed once BOOKE uses fast syscall entry */
-	lwz	r11,_CCR(r1)	/* Clear SO bit in CR */
-	rlwinm	r11,r11,0,4,2
-	stw	r11,_CCR(r1)
-#endif
 #ifdef CONFIG_TRACE_IRQFLAGS
 	/* Make sure interrupts are enabled */
 	mfmsr	r11
arch/powerpc/kernel/head_44x.S +1 -2
index e06cb1c84951..7d73c7e39afe 100644
@@ -282,8 +282,7 @@ interrupt_base:
 #endif
 	/* System Call Interrupt */
 	START_EXCEPTION(SystemCall)
-	NORMAL_EXCEPTION_PROLOG(BOOKE_INTERRUPT_SYSCALL)
-	EXC_XFER_SYS(0x0c00, DoSyscall)
+	SYSCALL_ENTRY   0xc00 BOOKE_INTERRUPT_SYSCALL
 
 	/* Auxiliary Processor Unavailable Interrupt */
 	EXCEPTION(0x2020, BOOKE_INTERRUPT_AP_UNAVAIL, \
arch/powerpc/kernel/head_booke.h +98 -5

127 lines not on this page · raw message

arch/powerpc/kernel/head_fsl_booke.S +1 -2
index b351851dc73d..a757be4f1cb5 100644
@@ -410,8 +410,7 @@ interrupt_base:
 
 	/* System Call Interrupt */
 	START_EXCEPTION(SystemCall)
-	NORMAL_EXCEPTION_PROLOG(SYSCALL)
-	EXC_XFER_SYS(0x0c00, DoSyscall)
+	SYSCALL_ENTRY   0xc00 SYSCALL
 
 	/* Auxiliary Processor Unavailable Interrupt */
 	EXCEPTION(0x2900, AP_UNAVAIL, AuxillaryProcessorUnavailable, \
Signature · 1 line
2.13.3
#15 lore raw

PATCH v2 15/17 powerpc/32: Remove MSR_PR test when returning from syscall

In reply to Christophe Leroy

syscalls are from user only, so we can account time without checking whether returning to kernel or user as it will only be user.

---
 arch/powerpc/kernel/entry_32.S | 5 -----
 1 file changed, 5 deletions(-)
arch/powerpc/kernel/entry_32.S +0 -5
index 5f52a71c2838..edd119d3c52b 100644
@@ -463,12 +463,7 @@ BEGIN_FTR_SECTION
 	lwarx	r7,0,r1
 END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX)
 	stwcx.	r0,0,r1			/* to clear the reservation */
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
-	andi.	r4,r8,MSR_PR
-	beq	3f
 	ACCOUNT_CPU_USER_EXIT(r2, r5, r7)
-3:
-#endif
 	lwz	r4,_LINK(r1)
 	lwz	r5,_CCR(r1)
 	mtlr	r4
Signature · 1 line
2.13.3
#16 lore raw

PATCH v2 16/17 powerpc/32: don't do syscall stuff in transfer_to_handler

In reply to Christophe Leroy

As syscalls are now handled via a fast entry path, syscall related actions can be removed from the generic transfer_to_handler path.

---
 arch/powerpc/kernel/entry_32.S | 19 -------------------
 1 file changed, 19 deletions(-)
arch/powerpc/kernel/entry_32.S +0 -19
index edd119d3c52b..c648b75f41a3 100644
@@ -211,7 +211,6 @@ transfer_to_handler_cont:
 	 */
 	tophys(r12, r1)
 	lwz	r12,_MSR(r12)
-	xor	r12,r10,r12
 	andi.	r12,r12,MSR_EE
 	bne	1f
 
@@ -252,9 +251,6 @@ reenable_mmu:
 	 * the rest is restored from the exception frame.
 	 */
 
-	/* Are we enabling or disabling interrupts ? */
-	andi.	r0,r10,MSR_EE
-
 	stwu	r1,-32(r1)
 	stw	r9,8(r1)
 	stw	r11,12(r1)
@@ -262,8 +258,6 @@ reenable_mmu:
 	stw	r4,20(r1)
 	stw	r5,24(r1)
 
-	bne-	0f
-
 	/* If we are disabling interrupts (normal case), simply log it with
 	 * lockdep
 	 */
@@ -281,19 +275,6 @@ reenable_mmu:
 	mtctr	r11
 	mtlr	r9
 	bctr				/* jump to handler */
-
-	/* If we are enabling interrupt, this is a syscall. They shouldn't
-	 * happen while interrupts are disabled, so let's do a warning here.
-	 */
-0:	trap
-	EMIT_BUG_ENTRY 0b,__FILE__,__LINE__, BUGFLAG_WARNING
-	bl	trace_hardirqs_on
-
-	/* Now enable for real */
-	mfmsr	r10
-	ori	r10,r10,MSR_EE
-	mtmsr	r10
-	b	2b
 #endif /* CONFIG_TRACE_IRQFLAGS */
 
 #if defined (CONFIG_PPC_BOOK3S_32) || defined(CONFIG_E500)
Signature · 1 line
2.13.3
#17 lore raw

PATCH v2 17/17 powerpc/32: Don't add dummy frames when calling trace_hardirqs_on/off

In reply to Christophe Leroy

No need to add dummy frames when calling trace_hardirqs_on or trace_hardirqs_off. GCC properly handles empty stacks.

In addition, powerpc doesn't set CONFIG_FRAME_POINTER, therefore __builtin_return_address(1..) returns NULL at all time. So the dummy frames are definitely unneeded here.

In the meantime, avoid reading memory for loading r1 with a value we already know.

---
 arch/powerpc/kernel/entry_32.S | 16 ++--------------
 1 file changed, 2 insertions(+), 14 deletions(-)
arch/powerpc/kernel/entry_32.S +2 -14
index c648b75f41a3..c1e9be5cba10 100644
@@ -237,12 +237,7 @@ transfer_to_handler_cont:
 
 reenable_mmu:
 	/*
-	 * The trace_hardirqs_off will use CALLER_ADDR0 and CALLER_ADDR1.
-	 * If from user mode there is only one stack frame on the stack, and
-	 * accessing CALLER_ADDR1 will cause oops. So we need create a dummy
-	 * stack frame to make trace_hardirqs_off happy.
-	 *
-	 * This is handy because we also need to save a bunch of GPRs,
+	 * We save a bunch of GPRs,
 	 * r3 can be different from GPR3(r1) at this point, r9 and r11
 	 * contains the old MSR and handler address respectively,
 	 * r4 & r5 can contain page fault arguments that need to be passed
@@ -933,18 +928,11 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_47x)
 	 */
 	andi.	r10,r9,MSR_EE
 	beq	1f
-	/*
-	 * Since the ftrace irqsoff latency trace checks CALLER_ADDR1,
-	 * which is the stack frame here, we need to force a stack frame
-	 * in case we came from user space.
-	 */
 	stwu	r1,-32(r1)
 	mflr	r0
 	stw	r0,4(r1)
-	stwu	r1,-32(r1)
 	bl	trace_hardirqs_on
-	lwz	r1,0(r1)
-	lwz	r1,0(r1)
+	addi	r1, r1, 32
 	lwz	r9,_MSR(r1)
 1:
 #endif /* CONFIG_TRACE_IRQFLAGS */
Signature · 1 line
2.13.3