Skip to contentSkip to conversation

net: stmmac: Some improvements and a fix

PATCH In review Jose Abreu 2 participants 5 messages Jul 9, 2019

Subsystems (5)
lore
Share & tools
lore

Jose Abreu

author
#0 lore raw

v4 cover net: stmmac: Some improvements and a fix

Some performace improvements (01/03 and 03/03) and a fix (02/03), all for -next.

---
Cc: Giuseppe Cavallaro <[email protected]>
Cc: Alexandre Torgue <[email protected]>
Cc: Jose Abreu <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Maxime Coquelin <[email protected]>
Cc: Maxime Ripard <[email protected]>
Cc: Chen-Yu Tsai <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
---

Jose Abreu (3):
net: stmmac: Implement RX Coalesce Frames setting
net: stmmac: Fix descriptors address being in > 32 bits address space
net: stmmac: Introducing support for Page Pool

 drivers/net/ethernet/stmicro/stmmac/Kconfig        |   1 +
 drivers/net/ethernet/stmicro/stmmac/common.h       |   1 +
 drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c  |   8 +-
 .../net/ethernet/stmicro/stmmac/dwmac1000_dma.c    |   8 +-
 drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c |   8 +-
 drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c   |   8 +-
 drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h     |   2 +
 drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c |  10 +-
 drivers/net/ethernet/stmicro/stmmac/hwif.h         |   4 +-
 drivers/net/ethernet/stmicro/stmmac/stmmac.h       |  12 +-
 .../net/ethernet/stmicro/stmmac/stmmac_ethtool.c   |   7 +-
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c  | 217 +++++++--------------
 12 files changed, 114 insertions(+), 172 deletions(-)
Signature · 7 lines
2.7.4


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
author
#1 lore raw

PATCH v4 1/3 net: stmmac: Implement RX Coalesce Frames setting

Add support for coalescing RX path by specifying number of frames which don't need to have interrupt on completion bit set.

This is only available when RX Watchdog is enabled.

---
Cc: Giuseppe Cavallaro <[email protected]>
Cc: Alexandre Torgue <[email protected]>
Cc: Jose Abreu <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Maxime Coquelin <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: Jakub Kicinski <[email protected]>

---
 drivers/net/ethernet/stmicro/stmmac/common.h         |  1 +
 drivers/net/ethernet/stmicro/stmmac/stmmac.h         |  2 ++
 drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c |  7 +++++--
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c    | 18 ++++++++++++------
 4 files changed, 20 insertions(+), 8 deletions(-)
drivers/net/ethernet/stmicro/stmmac/common.h +1 -0
index 2403a65167b2..dfd47fdfa447 100644
@@ -252,6 +252,7 @@ struct stmmac_safety_stats {
 #define STMMAC_MAX_COAL_TX_TICK	100000
 #define STMMAC_TX_MAX_FRAMES	256
 #define STMMAC_TX_FRAMES	1
+#define STMMAC_RX_FRAMES	25
 
 /* Packets types */
 enum packets_types {
drivers/net/ethernet/stmicro/stmmac/stmmac.h +2 -0
index 123898235cb0..513f4e2df5f6 100644
@@ -55,6 +55,7 @@ struct stmmac_tx_queue {
 };
 
 struct stmmac_rx_queue {
+	u32 rx_count_frames;
 	u32 queue_index;
 	struct stmmac_priv *priv_data;
 	struct dma_extended_desc *dma_erx;
@@ -110,6 +111,7 @@ struct stmmac_priv {
 	/* Frequently used values are kept adjacent for cache effect */
 	u32 tx_coal_frames;
 	u32 tx_coal_timer;
+	u32 rx_coal_frames;
 
 	int tx_coalesce;
 	int hwts_tx_en;
drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c +5 -2
index cfd93eefb50e..6efb66820d4c 100644
@@ -701,8 +701,10 @@ static int stmmac_get_coalesce(struct net_device *dev,
 	ec->tx_coalesce_usecs = priv->tx_coal_timer;
 	ec->tx_max_coalesced_frames = priv->tx_coal_frames;
 
-	if (priv->use_riwt)
+	if (priv->use_riwt) {
+		ec->rx_max_coalesced_frames = priv->rx_coal_frames;
 		ec->rx_coalesce_usecs = stmmac_riwt2usec(priv->rx_riwt, priv);
+	}
 
 	return 0;
 }
@@ -715,7 +717,7 @@ static int stmmac_set_coalesce(struct net_device *dev,
 	unsigned int rx_riwt;
 
 	/* Check not supported parameters  */
-	if ((ec->rx_max_coalesced_frames) || (ec->rx_coalesce_usecs_irq) ||
+	if ((ec->rx_coalesce_usecs_irq) ||
 	    (ec->rx_max_coalesced_frames_irq) || (ec->tx_coalesce_usecs_irq) ||
 	    (ec->use_adaptive_rx_coalesce) || (ec->use_adaptive_tx_coalesce) ||
 	    (ec->pkt_rate_low) || (ec->rx_coalesce_usecs_low) ||
@@ -749,6 +751,7 @@ static int stmmac_set_coalesce(struct net_device *dev,
 	/* Only copy relevant parameters, ignore all others. */
 	priv->tx_coal_frames = ec->tx_max_coalesced_frames;
 	priv->tx_coal_timer = ec->tx_coalesce_usecs;
+	priv->rx_coal_frames = ec->rx_max_coalesced_frames;
 	priv->rx_riwt = rx_riwt;
 	stmmac_rx_watchdog(priv, priv->ioaddr, priv->rx_riwt, rx_cnt);
 
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +12 -6
index bdedde99148a..c142e9367a68 100644
@@ -2268,20 +2268,21 @@ static void stmmac_tx_timer(struct timer_list *t)
 }
 
 /**
- * stmmac_init_tx_coalesce - init tx mitigation options.
+ * stmmac_init_coalesce - init mitigation options.
  * @priv: driver private structure
  * Description:
- * This inits the transmit coalesce parameters: i.e. timer rate,
+ * This inits the coalesce parameters: i.e. timer rate,
  * timer handler and default threshold used for enabling the
  * interrupt on completion bit.
  */
-static void stmmac_init_tx_coalesce(struct stmmac_priv *priv)
+static void stmmac_init_coalesce(struct stmmac_priv *priv)
 {
 	u32 tx_channel_count = priv->plat->tx_queues_to_use;
 	u32 chan;
 
 	priv->tx_coal_frames = STMMAC_TX_FRAMES;
 	priv->tx_coal_timer = STMMAC_COAL_TX_TIMER;
+	priv->rx_coal_frames = STMMAC_RX_FRAMES;
 
 	for (chan = 0; chan < tx_channel_count; chan++) {
 		struct stmmac_tx_queue *tx_q = &priv->tx_queue[chan];
@@ -2651,7 +2652,7 @@ static int stmmac_open(struct net_device *dev)
 		goto init_error;
 	}
 
-	stmmac_init_tx_coalesce(priv);
+	stmmac_init_coalesce(priv);
 
 	phylink_start(priv->phylink);
 
@@ -3289,6 +3290,7 @@ static inline void stmmac_rx_refill(struct stmmac_priv *priv, u32 queue)
 
 	while (dirty-- > 0) {
 		struct dma_desc *p;
+		bool use_rx_wd;
 
 		if (priv->extend_desc)
 			p = (struct dma_desc *)(rx_q->dma_erx + entry);
@@ -3331,7 +3333,11 @@ static inline void stmmac_rx_refill(struct stmmac_priv *priv, u32 queue)
 		}
 		dma_wmb();
 
-		stmmac_set_rx_owner(priv, p, priv->use_riwt);
+		rx_q->rx_count_frames++;
+		rx_q->rx_count_frames %= priv->rx_coal_frames;
+		use_rx_wd = priv->use_riwt && rx_q->rx_count_frames;
+
+		stmmac_set_rx_owner(priv, p, use_rx_wd);
 
 		dma_wmb();
 
@@ -4631,7 +4637,7 @@ int stmmac_resume(struct device *dev)
 	stmmac_clear_descriptors(priv);
 
 	stmmac_hw_setup(ndev, false);
-	stmmac_init_tx_coalesce(priv);
+	stmmac_init_coalesce(priv);
 	stmmac_set_rx_mode(ndev);
 
 	stmmac_enable_all_queues(priv);
Signature · 1 line
2.7.4
author
#2 lore raw

PATCH v4 2/3 net: stmmac: Fix descriptors address being in > 32 bits address space

In reply to Jose Abreu

Commit a993db88d17d ("net: stmmac: Enable support for > 32 Bits addressing in XGMAC"), introduced support for > 32 bits addressing in XGMAC but the conversion of descriptors to dma_addr_t was left out.

As some devices assing coherent memory in regions > 32 bits we need to set lower and upper value of descriptors address when initializing DMA channels.

Luckly, this was working for me because I was assigning CMA to < 4GB address space for performance reasons.

Fixes a993db88d17d ("net: stmmac: Enable support for > 32 Bits addressing in XGMAC")

---
Cc: Giuseppe Cavallaro <[email protected]>
Cc: Alexandre Torgue <[email protected]>
Cc: Jose Abreu <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Maxime Coquelin <[email protected]>
Cc: Maxime Ripard <[email protected]>
Cc: Chen-Yu Tsai <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]

---
 drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c   |  8 ++++----
 drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c |  8 ++++----
 drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c  |  8 ++++----
 drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c    |  8 ++++----
 drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h      |  2 ++
 drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c  | 10 ++++++----
 drivers/net/ethernet/stmicro/stmmac/hwif.h          |  4 ++--
 7 files changed, 26 insertions(+), 22 deletions(-)
drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c +4 -4
index 6d5cba4075eb..2856f3fe5266 100644
@@ -289,18 +289,18 @@ static void sun8i_dwmac_dma_init(void __iomem *ioaddr,
 
 static void sun8i_dwmac_dma_init_rx(void __iomem *ioaddr,
 				    struct stmmac_dma_cfg *dma_cfg,
-				    u32 dma_rx_phy, u32 chan)
+				    dma_addr_t dma_rx_phy, u32 chan)
 {
 	/* Write RX descriptors address */
-	writel(dma_rx_phy, ioaddr + EMAC_RX_DESC_LIST);
+	writel(lower_32_bits(dma_rx_phy), ioaddr + EMAC_RX_DESC_LIST);
 }
 
 static void sun8i_dwmac_dma_init_tx(void __iomem *ioaddr,
 				    struct stmmac_dma_cfg *dma_cfg,
-				    u32 dma_tx_phy, u32 chan)
+				    dma_addr_t dma_tx_phy, u32 chan)
 {
 	/* Write TX descriptors address */
-	writel(dma_tx_phy, ioaddr + EMAC_TX_DESC_LIST);
+	writel(lower_32_bits(dma_tx_phy), ioaddr + EMAC_TX_DESC_LIST);
 }
 
 /* sun8i_dwmac_dump_regs() - Dump EMAC address space
drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c +4 -4
index 1fdedf77678f..2bac49b49f73 100644
@@ -112,18 +112,18 @@ static void dwmac1000_dma_init(void __iomem *ioaddr,
 
 static void dwmac1000_dma_init_rx(void __iomem *ioaddr,
 				  struct stmmac_dma_cfg *dma_cfg,
-				  u32 dma_rx_phy, u32 chan)
+				  dma_addr_t dma_rx_phy, u32 chan)
 {
 	/* RX descriptor base address list must be written into DMA CSR3 */
-	writel(dma_rx_phy, ioaddr + DMA_RCV_BASE_ADDR);
+	writel(lower_32_bits(dma_rx_phy), ioaddr + DMA_RCV_BASE_ADDR);
 }
 
 static void dwmac1000_dma_init_tx(void __iomem *ioaddr,
 				  struct stmmac_dma_cfg *dma_cfg,
-				  u32 dma_tx_phy, u32 chan)
+				  dma_addr_t dma_tx_phy, u32 chan)
 {
 	/* TX descriptor base address list must be written into DMA CSR4 */
-	writel(dma_tx_phy, ioaddr + DMA_TX_BASE_ADDR);
+	writel(lower_32_bits(dma_tx_phy), ioaddr + DMA_TX_BASE_ADDR);
 }
 
 static u32 dwmac1000_configure_fc(u32 csr6, int rxfifosz)
drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c +4 -4
index c980cc7360a4..8f0d9bc7cab5 100644
@@ -31,18 +31,18 @@ static void dwmac100_dma_init(void __iomem *ioaddr,
 
 static void dwmac100_dma_init_rx(void __iomem *ioaddr,
 				 struct stmmac_dma_cfg *dma_cfg,
-				 u32 dma_rx_phy, u32 chan)
+				 dma_addr_t dma_rx_phy, u32 chan)
 {
 	/* RX descriptor base addr lists must be written into DMA CSR3 */
-	writel(dma_rx_phy, ioaddr + DMA_RCV_BASE_ADDR);
+	writel(lower_32_bits(dma_rx_phy), ioaddr + DMA_RCV_BASE_ADDR);
 }
 
 static void dwmac100_dma_init_tx(void __iomem *ioaddr,
 				 struct stmmac_dma_cfg *dma_cfg,
-				 u32 dma_tx_phy, u32 chan)
+				 dma_addr_t dma_tx_phy, u32 chan)
 {
 	/* TX descriptor base addr lists must be written into DMA CSR4 */
-	writel(dma_tx_phy, ioaddr + DMA_TX_BASE_ADDR);
+	writel(lower_32_bits(dma_tx_phy), ioaddr + DMA_TX_BASE_ADDR);
 }
 
 /* Store and Forward capability is not used at all.
drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c +4 -4
index 0f208e13da9f..6cbcdaea55f6 100644
@@ -70,7 +70,7 @@ static void dwmac4_dma_axi(void __iomem *ioaddr, struct stmmac_axi *axi)
 
 static void dwmac4_dma_init_rx_chan(void __iomem *ioaddr,
 				    struct stmmac_dma_cfg *dma_cfg,
-				    u32 dma_rx_phy, u32 chan)
+				    dma_addr_t dma_rx_phy, u32 chan)
 {
 	u32 value;
 	u32 rxpbl = dma_cfg->rxpbl ?: dma_cfg->pbl;
@@ -79,12 +79,12 @@ static void dwmac4_dma_init_rx_chan(void __iomem *ioaddr,
 	value = value | (rxpbl << DMA_BUS_MODE_RPBL_SHIFT);
 	writel(value, ioaddr + DMA_CHAN_RX_CONTROL(chan));
 
-	writel(dma_rx_phy, ioaddr + DMA_CHAN_RX_BASE_ADDR(chan));
+	writel(lower_32_bits(dma_rx_phy), ioaddr + DMA_CHAN_RX_BASE_ADDR(chan));
 }
 
 static void dwmac4_dma_init_tx_chan(void __iomem *ioaddr,
 				    struct stmmac_dma_cfg *dma_cfg,
-				    u32 dma_tx_phy, u32 chan)
+				    dma_addr_t dma_tx_phy, u32 chan)
 {
 	u32 value;
 	u32 txpbl = dma_cfg->txpbl ?: dma_cfg->pbl;
@@ -97,7 +97,7 @@ static void dwmac4_dma_init_tx_chan(void __iomem *ioaddr,
 
 	writel(value, ioaddr + DMA_CHAN_TX_CONTROL(chan));
 
-	writel(dma_tx_phy, ioaddr + DMA_CHAN_TX_BASE_ADDR(chan));
+	writel(lower_32_bits(dma_tx_phy), ioaddr + DMA_CHAN_TX_BASE_ADDR(chan));
 }
 
 static void dwmac4_dma_init_channel(void __iomem *ioaddr,
drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h +2 -0
index 9a9792527530..7f86dffb264d 100644
@@ -199,7 +199,9 @@
 #define XGMAC_RxPBL			GENMASK(21, 16)
 #define XGMAC_RxPBL_SHIFT		16
 #define XGMAC_RXST			BIT(0)
+#define XGMAC_DMA_CH_TxDESC_HADDR(x)	(0x00003110 + (0x80 * (x)))
 #define XGMAC_DMA_CH_TxDESC_LADDR(x)	(0x00003114 + (0x80 * (x)))
+#define XGMAC_DMA_CH_RxDESC_HADDR(x)	(0x00003118 + (0x80 * (x)))
 #define XGMAC_DMA_CH_RxDESC_LADDR(x)	(0x0000311c + (0x80 * (x)))
 #define XGMAC_DMA_CH_TxDESC_TAIL_LPTR(x)	(0x00003124 + (0x80 * (x)))
 #define XGMAC_DMA_CH_RxDESC_TAIL_LPTR(x)	(0x0000312c + (0x80 * (x)))
drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c +6 -4
index 229c58758cbd..a4f236e3593e 100644
@@ -44,7 +44,7 @@ static void dwxgmac2_dma_init_chan(void __iomem *ioaddr,
 
 static void dwxgmac2_dma_init_rx_chan(void __iomem *ioaddr,
 				      struct stmmac_dma_cfg *dma_cfg,
-				      u32 dma_rx_phy, u32 chan)
+				      dma_addr_t phy, u32 chan)
 {
 	u32 rxpbl = dma_cfg->rxpbl ?: dma_cfg->pbl;
 	u32 value;
@@ -54,12 +54,13 @@ static void dwxgmac2_dma_init_rx_chan(void __iomem *ioaddr,
 	value |= (rxpbl << XGMAC_RxPBL_SHIFT) & XGMAC_RxPBL;
 	writel(value, ioaddr + XGMAC_DMA_CH_RX_CONTROL(chan));
 
-	writel(dma_rx_phy, ioaddr + XGMAC_DMA_CH_RxDESC_LADDR(chan));
+	writel(upper_32_bits(phy), ioaddr + XGMAC_DMA_CH_RxDESC_HADDR(chan));
+	writel(lower_32_bits(phy), ioaddr + XGMAC_DMA_CH_RxDESC_LADDR(chan));
 }
 
 static void dwxgmac2_dma_init_tx_chan(void __iomem *ioaddr,
 				      struct stmmac_dma_cfg *dma_cfg,
-				      u32 dma_tx_phy, u32 chan)
+				      dma_addr_t phy, u32 chan)
 {
 	u32 txpbl = dma_cfg->txpbl ?: dma_cfg->pbl;
 	u32 value;
@@ -70,7 +71,8 @@ static void dwxgmac2_dma_init_tx_chan(void __iomem *ioaddr,
 	value |= XGMAC_OSP;
 	writel(value, ioaddr + XGMAC_DMA_CH_TX_CONTROL(chan));
 
-	writel(dma_tx_phy, ioaddr + XGMAC_DMA_CH_TxDESC_LADDR(chan));
+	writel(upper_32_bits(phy), ioaddr + XGMAC_DMA_CH_TxDESC_HADDR(chan));
+	writel(lower_32_bits(phy), ioaddr + XGMAC_DMA_CH_TxDESC_LADDR(chan));
 }
 
 static void dwxgmac2_dma_axi(void __iomem *ioaddr, struct stmmac_axi *axi)
drivers/net/ethernet/stmicro/stmmac/hwif.h +2 -2
index 2acfbc70e3c8..278c0dbec9d9 100644
@@ -150,10 +150,10 @@ struct stmmac_dma_ops {
 			  struct stmmac_dma_cfg *dma_cfg, u32 chan);
 	void (*init_rx_chan)(void __iomem *ioaddr,
 			     struct stmmac_dma_cfg *dma_cfg,
-			     u32 dma_rx_phy, u32 chan);
+			     dma_addr_t phy, u32 chan);
 	void (*init_tx_chan)(void __iomem *ioaddr,
 			     struct stmmac_dma_cfg *dma_cfg,
-			     u32 dma_tx_phy, u32 chan);
+			     dma_addr_t phy, u32 chan);
 	/* Configure the AXI Bus Mode Register */
 	void (*axi)(void __iomem *ioaddr, struct stmmac_axi *axi);
 	/* Dump DMA registers */
Signature · 1 line
2.7.4
author
#3 lore raw

PATCH v4 3/3 net: stmmac: Introducing support for Page Pool

In reply to Jose Abreu

Mapping and unmapping DMA region is an high bottleneck in stmmac driver, specially in the RX path.

This commit introduces support for Page Pool API and uses it in all RX queues. With this change, we get more stable troughput and some increase of banwidth with iperf:
- MAC1000 - 950 Mbps
- XGMAC: 9.22 Gbps

Changes from v3:
- Use page_pool_destroy() (Ilias)
Changes from v2:
- Uncoditionally call page_pool_free() (Jesper)
Changes from v1:
- Use page_pool_get_dma_addr() (Jesper)
- Add a comment (Jesper)
- Add page_pool_free() call (Jesper)
- Reintroduce sync_single_for_device (Arnd / Ilias)

---
Cc: Giuseppe Cavallaro <[email protected]>
Cc: Alexandre Torgue <[email protected]>
Cc: Jose Abreu <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Maxime Coquelin <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: Ilias Apalodimas <[email protected]>
Cc: Jesper Dangaard Brouer <[email protected]>
Cc: Arnd Bergmann <[email protected]>

---
 drivers/net/ethernet/stmicro/stmmac/Kconfig       |   1 +
 drivers/net/ethernet/stmicro/stmmac/stmmac.h      |  10 +-
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 203 +++++++---------------
 3 files changed, 70 insertions(+), 144 deletions(-)
drivers/net/ethernet/stmicro/stmmac/Kconfig +1 -0
index 943189dcccb1..2325b40dff6e 100644
@@ -3,6 +3,7 @@ config STMMAC_ETH
 	tristate "STMicroelectronics Multi-Gigabit Ethernet driver"
 	depends on HAS_IOMEM && HAS_DMA
 	select MII
+	select PAGE_POOL
 	select PHYLINK
 	select CRC32
 	imply PTP_1588_CLOCK
drivers/net/ethernet/stmicro/stmmac/stmmac.h +8 -2
index 513f4e2df5f6..5cd966c154f3 100644
@@ -20,6 +20,7 @@
 #include <linux/ptp_clock_kernel.h>
 #include <linux/net_tstamp.h>
 #include <linux/reset.h>
+#include <net/page_pool.h>
 
 struct stmmac_resources {
 	void __iomem *addr;
@@ -54,14 +55,19 @@ struct stmmac_tx_queue {
 	u32 mss;
 };
 
+struct stmmac_rx_buffer {
+	struct page *page;
+	dma_addr_t addr;
+};
+
 struct stmmac_rx_queue {
 	u32 rx_count_frames;
 	u32 queue_index;
+	struct page_pool *page_pool;
+	struct stmmac_rx_buffer *buf_pool;
 	struct stmmac_priv *priv_data;
 	struct dma_extended_desc *dma_erx;
 	struct dma_desc *dma_rx ____cacheline_aligned_in_smp;
-	struct sk_buff **rx_skbuff;
-	dma_addr_t *rx_skbuff_dma;
 	unsigned int cur_rx;
 	unsigned int dirty_rx;
 	u32 rx_zeroc_thresh;
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +61 -142

300 lines not on this page · raw message

Signature · 1 line
2.7.4