net/mlx5: support for flow action on VLAN header
Subsystems (2)
RFC 1/1 net/mlx5: support for flow action on VLAN header
VLAN actions support is implemented in librte_ethdev, and in test-pmd application, based on [1] Generic flow API. These actions conform to the VLAN actions defined in
[2] the OpenFlow Switch Specification.
rte_flow defines the following VLAN actions:
1. OF_POP_VLAN
Pop the outer-most VLAN header from the packet.
2. OF_PUSH_VLAN
Push a new VLAN header onto the packet.
3. OF_SET_VLAN_VID
Sets the ID of the outermost VLAN tag.
4. OF_SET_VLAN_PCP
Sets the 3-bit priority field of the outermost VLAN tag.
As for today the mlx5 PMD does not support those VLAN actions using its Direct Verbs interface.
This RFC proposes adding this missing support to the PMD.
Comments are welcome.
[1] https://doc.dpdk.org/guides/prog_guide/rte_flow.html
[2] https://www.opennetworking.org/wp-content/uploads/2014/10/
openflow-spec-v1.4.0.pdf
--- drivers/net/mlx5/Makefile | 2 +- drivers/net/mlx5/meson.build | 2 +- drivers/net/mlx5/mlx5.c | 9 ++ drivers/net/mlx5/mlx5.h | 1 + drivers/net/mlx5/mlx5_flow.h | 26 +++- drivers/net/mlx5/mlx5_flow_dv.c | 263 +++++++++++++++++++++++++++++++++++++++- drivers/net/mlx5/mlx5_glue.c | 27 +++++ drivers/net/mlx5/mlx5_glue.h | 2 + drivers/net/mlx5/mlx5_prm.h | 1 + 9 files changed, 324 insertions(+), 9 deletions(-)
drivers/net/mlx5/Makefile +1 -1
@@ -8,7 +8,7 @@ include $(RTE_SDK)/mk/rte.vars.mk LIB = librte_pmd_mlx5.a LIB_GLUE = $(LIB_GLUE_BASE).$(LIB_GLUE_VERSION) LIB_GLUE_BASE = librte_pmd_mlx5_glue.so -LIB_GLUE_VERSION = 19.05.0 +LIB_GLUE_VERSION = 19.08.0 # Sources. SRCS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5.c
drivers/net/mlx5/meson.build +1 -1
@@ -4,7 +4,7 @@ pmd_dlopen = (get_option('ibverbs_link') == 'dlopen') LIB_GLUE_BASE = 'librte_pmd_mlx5_glue.so' -LIB_GLUE_VERSION = '19.05.0' +LIB_GLUE_VERSION = '19.08.0' LIB_GLUE = LIB_GLUE_BASE + '.' + LIB_GLUE_VERSION if pmd_dlopen dpdk_conf.set('RTE_IBVERBS_LINK_DLOPEN', 1)
drivers/net/mlx5/mlx5.c +9 -0
@@ -369,6 +369,7 @@ struct mlx5_dev_spawn_data { }pthread_mutex_init (&sh->dv_mutex,NULL ); sh->tx_domain = domain; + sh->pop_vlan_action = mlx5_glue->dr_create_flow_action_pop_vlan ();#ifdef HAVE_MLX5DV_DR_ESWITCH if (priv->config.dv_esw_en) { domain = mlx5_glue->dr_create_domain
@@ -400,6 +401,10 @@ struct mlx5_dev_spawn_data { mlx5_glue->dr_destroy_domain (sh->fdb_domain); sh->fdb_domain =NULL ; } +if (sh->pop_vlan_action) { + mlx5_glue->destroy_flow_action (sh->pop_vlan_action); + sh->pop_vlan_action =NULL ; + }if (sh->esw_drop_action) { mlx5_glue->destroy_flow_action (sh->esw_drop_action); sh->esw_drop_action =NULL ;
@@ -439,6 +444,10 @@ struct mlx5_dev_spawn_data { mlx5_glue->dr_destroy_domain (sh->tx_domain); sh->tx_domain =NULL ; } +if (sh->pop_vlan_action) { + mlx5_glue->destroy_flow_action (sh->pop_vlan_action); + sh->pop_vlan_action =NULL ; + }#ifdef HAVE_MLX5DV_DR_ESWITCH if (sh->fdb_domain) { mlx5_glue->dr_destroy_domain (sh->fdb_domain);
drivers/net/mlx5/mlx5.h +1 -0
@@ -297,6 +297,7 @@ struct mlx5_ibv_shared {void *tx_domain;/* TX Direct Rules name space handle. */ struct mlx5_flow_tbl_resource tx_tbl[MLX5_MAX_TABLES ];void *esw_drop_action;/* Pointer to DR E-Switch drop action. */ +void *pop_vlan_action;/* Pointer to DR pop VLAN action. */ /* TX Direct Rules tables/ */ LIST_HEAD(matchers, mlx5_flow_dv_matcher) matchers; LIST_HEAD(encap_decap, mlx5_flow_dv_encap_decap_resource) encaps_decaps;
drivers/net/mlx5/mlx5_flow.h +23 -3
@@ -125,11 +125,13 @@#define MLX5_FLOW_ENCAP_ACTIONS (MLX5_FLOW_ACTION_VXLAN_ENCAP | \ MLX5_FLOW_ACTION_NVGRE_ENCAP | \ - MLX5_FLOW_ACTION_RAW_ENCAP) + MLX5_FLOW_ACTION_RAW_ENCAP | \ + MLX5_FLOW_ACTION_OF_PUSH_VLAN)#define MLX5_FLOW_DECAP_ACTIONS (MLX5_FLOW_ACTION_VXLAN_DECAP | \ MLX5_FLOW_ACTION_NVGRE_DECAP | \ - MLX5_FLOW_ACTION_RAW_DECAP) + MLX5_FLOW_ACTION_RAW_DECAP | \ + MLX5_FLOW_ACTION_OF_POP_VLAN)#define MLX5_FLOW_MODIFY_HDR_ACTIONS (MLX5_FLOW_ACTION_SET_IPV4_SRC | \ MLX5_FLOW_ACTION_SET_IPV4_DST | \
@@ -140,7 +142,13 @@MLX5_FLOW_ACTION_SET_TTL | \MLX5_FLOW_ACTION_DEC_TTL | \MLX5_FLOW_ACTION_SET_MAC_SRC | \ - MLX5_FLOW_ACTION_SET_MAC_DST) +MLX5_FLOW_ACTION_SET_MAC_DST | \ +MLX5_FLOW_ACTION_OF_SET_VLAN_VID | \ + MLX5_FLOW_ACTION_OF_SET_VLAN_PCP) + +#define MLX5_FLOW_VLAN_ACTIONS \ + (MLX5_FLOW_ACTION_OF_POP_VLAN |MLX5_FLOW_ACTION_OF_PUSH_VLAN | \ + MLX5_FLOW_ACTION_OF_SET_VLAN_VID | MLX5_FLOW_ACTION_OF_SET_VLAN_PCP)#ifndef IPPROTO_MPLS #define IPPROTO_MPLS 137
@@ -258,6 +266,16 @@ struct mlx5_flow_dv_modify_hdr_resource {uint64_t flags;/**< Flags for RDMA API. */ }; +/* Push VLAN action resource structure */ +struct mlx5_flow_dv_push_vlan_action_resource { +LIST_ENTRY (mlx5_flow_dv_push_vlan_action_resource) next; +/* Pointer to next element. */ +rte_atomic32_t refcnt;/**< Reference counter. */ +void *action; +/**< Direct verbs action object. */ +uint32_t vlan_hdr;/**< VLAN header value. */ +}; +/* Jump action resource structure. */ struct mlx5_flow_dv_jump_tbl_resource {LIST_ENTRY (mlx5_flow_dv_jump_tbl_resource) next;
@@ -297,6 +315,8 @@ struct mlx5_flow_dv {/**< Pointer to encap/decap resource in cache. */ struct mlx5_flow_dv_modify_hdr_resource *modify_hdr;/**< Pointer to modify header resource in cache. */ +struct mlx5_flow_dv_push_vlan_action_resource *push_vlan_action; +/**< Pointer to push VLAN action resource in cache. */ struct ibv_flow *flow;/**< Installed flow. */ struct mlx5_flow_dv_jump_tbl_resource *jump;/**< Pointer to the jump action resource. */
drivers/net/mlx5/mlx5_flow_dv.c +259 -4
332 lines not on this page · raw message
drivers/net/mlx5/mlx5_glue.c +27 -0
@@ -408,6 +408,29 @@ }static void * +mlx5_glue_dr_create_flow_action_push_vlan (uint32_t vlan_tag) +{ +#ifdef HAVE_MLX5DV_DR_VLAN +return mlx5dv_dr_create_action_pop_vlan (vlan_tag); +#else + (void )vlan_tag; + errno =ENOTSUP ; +return NULL ; +#endif +} + +static void * +mlx5_glue_dr_create_flow_action_pop_vlan (void ) +{ +#ifdef HAVE_MLX5DV_DR_VLAN +return mlx5dv_dr_create_action_pop_vlan (); +#else + errno =ENOTSUP ; +return NULL ; +#endif +} + +static void *mlx5_glue_dr_create_flow_tbl (void *domain,uint32_t level) {#ifdef HAVE_MLX5DV_DR
@@ -893,6 +916,10 @@ mlx5_glue_dr_create_flow_action_dest_vport, .dr_create_flow_action_drop = mlx5_glue_dr_create_flow_action_drop, + .dr_create_flow_action_push_vlan = + mlx5_glue_dr_create_flow_action_push_vlan, + .dr_create_flow_action_pop_vlan = + mlx5_glue_dr_create_flow_action_pop_vlan, .dr_create_flow_tbl = mlx5_glue_dr_create_flow_tbl, .dr_destroy_flow_tbl = mlx5_glue_dr_destroy_flow_tbl, .dr_create_domain = mlx5_glue_dr_create_domain,
drivers/net/mlx5/mlx5_glue.h +2 -0
@@ -148,6 +148,8 @@ struct mlx5_glue {void *(*dr_create_flow_action_dest_flow_tbl)(void *tbl);void *(*dr_create_flow_action_dest_vport)(void *domain,uint32_t vport);void *(*dr_create_flow_action_drop)(); +void *(*dr_create_flow_action_push_vlan)(uint32_t vlan_tag); +void *(*dr_create_flow_action_pop_vlan)();void *(*dr_create_flow_tbl)(void *domain,uint32_t level);int (*dr_destroy_flow_tbl)(void *tbl); void *(*dr_create_domain)(struct ibv_context *ctx,
drivers/net/mlx5/mlx5_prm.h +1 -0
@@ -310,6 +310,7 @@ enum mlx5_modification_field {MLX5_MODI_OUT_DIPV6_31_0 ,MLX5_MODI_OUT_SIPV4 ,MLX5_MODI_OUT_DIPV4 , +MLX5_MODI_OUT_FIRST_VID ,MLX5_MODI_IN_SMAC_47_16 =0x31 ,MLX5_MODI_IN_SMAC_15_0 , MLX5_MODI_IN_ETHERTYPE,
Signature · 1 line
1.8.3.1
cover net/mlx5: support for flow action on VLAN header
VLAN actions support is implemented in librte_ethdev, and in test-pmd application, based on [1] Generic flow API. These actions conform to the VLAN actions defined in
[2] the OpenFlow Switch Specification.
rte_flow defines the following VLAN actions:
1. OF_POP_VLAN
Pop the outer-most VLAN header from the packet.
2. OF_PUSH_VLAN
Push a new VLAN header onto the packet.
3. OF_SET_VLAN_VID
Sets the ID of the outermost VLAN tag.
4. OF_SET_VLAN_PCP
Sets the 3-bit priority field of the outermost VLAN tag.
This series of patches adds support for those VLAN actions to the mlx5 PMD using the Direct Verbs interface.
Moti Haimovsky (7):
net/mlx5: support for an action search in a list net/mlx5: add VLAN push/pop DR commands to glue net/mlx5: support pop flow action on VLAN header net/mlx5: support push flow action on VLAN header net/mlx5: support modify VLAN priority on VLAN hdr net/mlx5: supp modify VLAN ID on new VLAN header net/mlx5: supp modify VLAN ID on existing VLAN hdr
drivers/net/mlx5/Makefile | 5 + drivers/net/mlx5/meson.build | 2 + drivers/net/mlx5/mlx5.c | 9 + drivers/net/mlx5/mlx5.h | 3 + drivers/net/mlx5/mlx5_flow.c | 23 ++ drivers/net/mlx5/mlx5_flow.h | 27 ++- drivers/net/mlx5/mlx5_flow_dv.c | 521 ++++++++++++++++++++++++++++++++++++++++ drivers/net/mlx5/mlx5_glue.c | 29 +++ drivers/net/mlx5/mlx5_glue.h | 6 + drivers/net/mlx5/mlx5_prm.h | 1 + 10 files changed, 623 insertions(+), 3 deletions(-)
Signature · 1 line
1.8.3.1
PATCH 1/7 net/mlx5: support for an action search in a list
This commit adds a helper routine that supports searching for a specific action in a list of actions.
--- drivers/net/mlx5/mlx5_flow.c | 23 +++++++++++++++++++++++ drivers/net/mlx5/mlx5_flow.h | 3 +++ 2 files changed, 26 insertions(+)
drivers/net/mlx5/mlx5_flow.c +23 -0
@@ -685,6 +685,29 @@ uint32_t mlx5_flow_adjust_priority(struct rte_eth_dev *dev, int32_t priority, }/* +* return a pointer to the desired action in the list of actions. +* +* @param[in] actions +* The list of actions to search the action in. +* @param[in] action +* The action to find. +* +* @return +* Pointer to the action in the list, if found. NULL otherwise. +*/ +const struct rte_flow_action * +mlx5_flow_find_action (const struct rte_flow_action *actions, +enum rte_flow_action_type action) +{ +if (actions ==NULL ) +return NULL ; +for (; actions->type !=RTE_FLOW_ACTION_TYPE_END ; actions++) +if (actions->type == action) +return actions; +return NULL ; +} + +/* * Validate the flag action. * * @param[in] action_flags
drivers/net/mlx5/mlx5_flow.h +3 -0
@@ -442,6 +442,9 @@ uint64_t mlx5_flow_hashfields_adjust(struct mlx5_flow *dev_flow, int tunnel, uint64_t hash_fields);uint32_t mlx5_flow_adjust_priority (struct rte_eth_dev *dev,int32_t priority,uint32_t subpriority); +const struct rte_flow_action *mlx5_flow_find_action + (const struct rte_flow_action *actions, +enum rte_flow_action_type action);int mlx5_flow_validate_action_count (struct rte_eth_dev *dev,const struct rte_flow_attr *attr,struct rte_flow_error *error);
Signature · 1 line
1.8.3.1
PATCH 2/7 net/mlx5: add VLAN push/pop DR commands to glue
In reply to Moti HaimovskyThis commit adds the mlx5dv VLAN push and pop commands to mlx5_glue interface.
--- drivers/net/mlx5/Makefile | 5 +++++ drivers/net/mlx5/meson.build | 2 ++ drivers/net/mlx5/mlx5_glue.c | 29 +++++++++++++++++++++++++++++ drivers/net/mlx5/mlx5_glue.h | 6 ++++++ 4 files changed, 42 insertions(+)
drivers/net/mlx5/Makefile +5 -0
@@ -163,6 +163,11 @@ mlx5_autoconf.h.new: $(RTE_SDK)/buildtools/auto-config-h.sh enum MLX5DV_DR_DOMAIN_TYPE_FDB \ $(AUTOCONF_OUTPUT) $Q sh -- '$<' '$@' \ + HAVE_MLX5DV_DR_VLAN \ + infiniband/mlx5dv.h \ + func mlx5dv_dr_action_create_push_vlan \ + $(AUTOCONF_OUTPUT) + $Q sh -- '$<' '$@' \ HAVE_IBV_DEVX_OBJ \ infiniband/mlx5dv.h \ func mlx5dv_devx_obj_create \
drivers/net/mlx5/meson.build +2 -0
@@ -130,6 +130,8 @@ if build 'MLX5DV_DR_DOMAIN_TYPE_NIC_RX' ], [ 'HAVE_MLX5DV_DR_ESWITCH', 'infiniband/mlx5dv.h', 'MLX5DV_DR_DOMAIN_TYPE_FDB' ], + [ 'HAVE_MLX5DV_DR_VLAN', 'infiniband/mlx5dv.h', + 'mlx5dv_dr_action_create_push_vlan' ], [ 'HAVE_SUPPORTED_40000baseKR4_Full', 'linux/ethtool.h', 'SUPPORTED_40000baseKR4_Full' ], [ 'HAVE_SUPPORTED_40000baseCR4_Full', 'linux/ethtool.h',
drivers/net/mlx5/mlx5_glue.c +29 -0
@@ -415,6 +415,31 @@ }static void * +mlx5_glue_dr_create_flow_action_push_vlan (struct mlx5dv_dr_domain *domain, +rte_be32_t vlan_tag) +{ +#ifdef HAVE_MLX5DV_DR_VLAN +return mlx5dv_dr_action_create_push_vlan (domain, vlan_tag); +#else + (void )domain; + (void )vlan_tag; + errno =ENOTSUP ; +return NULL ; +#endif +} + +static void * +mlx5_glue_dr_create_flow_action_pop_vlan (void ) +{ +#ifdef HAVE_MLX5DV_DR_VLAN +return mlx5dv_dr_action_create_pop_vlan (); +#else + errno =ENOTSUP ; +return NULL ; +#endif +} + +static void *mlx5_glue_dr_create_flow_tbl (void *domain,uint32_t level) {#ifdef HAVE_MLX5DV_DR
@@ -1016,6 +1041,10 @@ mlx5_glue_dr_create_flow_action_dest_vport, .dr_create_flow_action_drop = mlx5_glue_dr_create_flow_action_drop, + .dr_create_flow_action_push_vlan = + mlx5_glue_dr_create_flow_action_push_vlan, + .dr_create_flow_action_pop_vlan = + mlx5_glue_dr_create_flow_action_pop_vlan, .dr_create_flow_tbl = mlx5_glue_dr_create_flow_tbl, .dr_destroy_flow_tbl = mlx5_glue_dr_destroy_flow_tbl, .dr_create_domain = mlx5_glue_dr_create_domain,
drivers/net/mlx5/mlx5_glue.h +6 -0
@@ -9,6 +9,8 @@#include <stddef.h> #include <stdint.h> +#include "rte_byteorder.h" +/* Verbs headers do not support -pedantic. */ #ifdef PEDANTIC #pragma GCC diagnostic ignored "-Wpedantic"
@@ -156,6 +158,10 @@ struct mlx5_glue {void *(*dr_create_flow_action_dest_flow_tbl)(void *tbl);void *(*dr_create_flow_action_dest_vport)(void *domain,uint32_t vport);void *(*dr_create_flow_action_drop)(); +void *(*dr_create_flow_action_push_vlan) + (struct mlx5dv_dr_domain *domain, +rte_be32_t vlan_tag); +void *(*dr_create_flow_action_pop_vlan)();void *(*dr_create_flow_tbl)(void *domain,uint32_t level);int (*dr_destroy_flow_tbl)(void *tbl); void *(*dr_create_domain)(struct ibv_context *ctx,
Signature · 1 line
1.8.3.1
PATCH 3/7 net/mlx5: support pop flow action on VLAN header
In reply to Moti HaimovskyThis commit adds support for RTE_FLOW_ACTION_TYPE_OF_POP_VLAN via direct verbs flow rules.
--- drivers/net/mlx5/mlx5.c | 9 +++++ drivers/net/mlx5/mlx5.h | 1 + drivers/net/mlx5/mlx5_flow.h | 5 ++- drivers/net/mlx5/mlx5_flow_dv.c | 78 +++++++++++++++++++++++++++++++++++++++++ 4 files changed, 92 insertions(+), 1 deletion(-)
drivers/net/mlx5/mlx5.c +9 -0
@@ -538,6 +538,7 @@ struct mlx5_dev_spawn_data { sh->esw_drop_action = mlx5_glue->dr_create_flow_action_drop(); }#endif + sh->pop_vlan_action = mlx5_glue->dr_create_flow_action_pop_vlan (); sh->dv_refcnt++; priv->dr_shared =1 ;return 0 ;
@@ -560,6 +561,10 @@ struct mlx5_dev_spawn_data { mlx5_glue->destroy_flow_action (sh->esw_drop_action); sh->esw_drop_action = NULL; } +if (sh->pop_vlan_action) { + mlx5_glue->destroy_flow_action (sh->pop_vlan_action); + sh->pop_vlan_action =NULL ; + }return err;#else (void )priv;
@@ -605,6 +610,10 @@ struct mlx5_dev_spawn_data { sh->esw_drop_action = NULL; }#endif +if (sh->pop_vlan_action) { + mlx5_glue->destroy_flow_action (sh->pop_vlan_action); + sh->pop_vlan_action =NULL ; + }pthread_mutex_destroy (&sh->dv_mutex);#else (void )priv;
drivers/net/mlx5/mlx5.h +1 -0
@@ -570,6 +570,7 @@ struct mlx5_ibv_shared {void *tx_domain;/* TX Direct Rules name space handle. */ struct mlx5_flow_tbl_resource tx_tbl[MLX5_MAX_TABLES ];void *esw_drop_action;/* Pointer to DR E-Switch drop action. */ +void *pop_vlan_action;/* Pointer to DR pop VLAN action. */ /* TX Direct Rules tables/ */ LIST_HEAD(matchers, mlx5_flow_dv_matcher) matchers; LIST_HEAD(encap_decap, mlx5_flow_dv_encap_decap_resource) encaps_decaps;
drivers/net/mlx5/mlx5_flow.h +4 -1
@@ -154,7 +154,8 @@#define MLX5_FLOW_DECAP_ACTIONS (MLX5_FLOW_ACTION_VXLAN_DECAP | \ MLX5_FLOW_ACTION_NVGRE_DECAP | \ - MLX5_FLOW_ACTION_RAW_DECAP) + MLX5_FLOW_ACTION_RAW_DECAP | \ + MLX5_FLOW_ACTION_OF_POP_VLAN)#define MLX5_FLOW_MODIFY_HDR_ACTIONS (MLX5_FLOW_ACTION_SET_IPV4_SRC | \ MLX5_FLOW_ACTION_SET_IPV4_DST | \
@@ -171,6 +172,8 @@ MLX5_FLOW_ACTION_INC_TCP_ACK | \ MLX5_FLOW_ACTION_DEC_TCP_ACK) +#define MLX5_FLOW_VLAN_ACTIONS (MLX5_FLOW_ACTION_OF_POP_VLAN) +#ifndef IPPROTO_MPLS #define IPPROTO_MPLS 137#endif
drivers/net/mlx5/mlx5_flow_dv.c +78 -0
102 lines not on this page · raw message
Signature · 1 line
1.8.3.1
PATCH 4/7 net/mlx5: support push flow action on VLAN header
In reply to Moti HaimovskyThis commit adds support for RTE_FLOW_ACTION_TYPE_OF_PUSH_VLAN using direct verbs flow rules.
If present in the flow, The VLAN default values are taken from the VLAN item configuration.
In this commit only the VLAN TPID value can be set since VLAN modification actions are not supported yet.
--- drivers/net/mlx5/mlx5.h | 2 + drivers/net/mlx5/mlx5_flow.h | 18 ++- drivers/net/mlx5/mlx5_flow_dv.c | 264 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 282 insertions(+), 2 deletions(-)
drivers/net/mlx5/mlx5.h +2 -0
@@ -579,6 +579,8 @@ struct mlx5_ibv_shared { LIST_HEAD(jump, mlx5_flow_dv_jump_tbl_resource) jump_tbl; LIST_HEAD(port_id_action_list, mlx5_flow_dv_port_id_action_resource) port_id_action_list;/* List of port ID actions. */ + LIST_HEAD(push_vlan_action_list, mlx5_flow_dv_push_vlan_action_resource) + push_vlan_action_list;/* List of push VLAN actions. */ struct mlx5_flow_counter_mng cmng;/* Counters management structure. */ /* Shared interrupt handler section. */ pthread_mutex_t intr_mutex;/* Interrupt config mutex. */
drivers/net/mlx5/mlx5_flow.h +16 -2
@@ -150,7 +150,8 @@#define MLX5_FLOW_ENCAP_ACTIONS (MLX5_FLOW_ACTION_VXLAN_ENCAP | \ MLX5_FLOW_ACTION_NVGRE_ENCAP | \ - MLX5_FLOW_ACTION_RAW_ENCAP) + MLX5_FLOW_ACTION_RAW_ENCAP | \ + MLX5_FLOW_ACTION_OF_PUSH_VLAN)#define MLX5_FLOW_DECAP_ACTIONS (MLX5_FLOW_ACTION_VXLAN_DECAP | \ MLX5_FLOW_ACTION_NVGRE_DECAP | \
@@ -172,7 +173,8 @@ MLX5_FLOW_ACTION_INC_TCP_ACK | \ MLX5_FLOW_ACTION_DEC_TCP_ACK) -#define MLX5_FLOW_VLAN_ACTIONS (MLX5_FLOW_ACTION_OF_POP_VLAN) +#define MLX5_FLOW_VLAN_ACTIONS (MLX5_FLOW_ACTION_OF_POP_VLAN | \ + MLX5_FLOW_ACTION_OF_PUSH_VLAN)#ifndef IPPROTO_MPLS #define IPPROTO_MPLS 137
@@ -309,6 +311,16 @@ struct mlx5_flow_dv_port_id_action_resource {uint32_t port_id;/**< Port ID value. */ }; +/* Push VLAN action resource structure */ +struct mlx5_flow_dv_push_vlan_action_resource { +LIST_ENTRY (mlx5_flow_dv_push_vlan_action_resource) next; +/* Pointer to next element. */ +rte_atomic32_t refcnt;/**< Reference counter. */ +void *action;/**< Direct verbs action object. */ +uint8_t ft_type;/**< Flow table type, Rx, Tx or FDB. */ +rte_be32_t vlan_tag;/**< VLAN tag value. */ +}; +/* * Max number of actions per DV flow. * See CREATE_FLOW_MAX_FLOW_ACTIONS_SUPPORTED
@@ -335,6 +347,8 @@ struct mlx5_flow_dv {/**< Pointer to port ID action resource. */ struct mlx5_vf_vlan vf_vlan;/**< Structure for VF VLAN workaround. */ +struct mlx5_flow_dv_push_vlan_action_resource *push_vlan_res; +/**< Pointer to push VLAN action resource in cache. */ #ifdef HAVE_IBV_FLOW_DV_SUPPORT void *actions[MLX5_DV_MAX_NUMBER_OF_ACTIONS ];/**< Action list. */
drivers/net/mlx5/mlx5_flow_dv.c +264 -0
325 lines not on this page · raw message
Signature · 1 line
1.8.3.1
PATCH 5/7 net/mlx5: support modify VLAN priority on VLAN hdr
In reply to Moti HaimovskyThis commit adds support for modifying the VLAN priority (PCP) field in about-to-be-pushed VLAN header.
This feature can only modify the PCP field of a new VLAN header yet to be pushed. It does not support modifying an existing or already pushed VLAN headers.
--- drivers/net/mlx5/mlx5_flow_dv.c | 58 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 58 insertions(+)
drivers/net/mlx5/mlx5_flow_dv.c +58 -0
@@ -983,6 +983,47 @@ struct field_modify_info modify_tcp[] = { }/** +* Validate the set VLAN PCP. +* +* @param[in] action_flags +* Holds the actions detected until now. +* @param[in] actions +* Pointer to the list of actions remaining in the flow rule. +* @param[in] attr +* Pointer to flow attributes +* @param[out] error +* Pointer to error structure. +* +* @return +* 0 on success, a negative errno value otherwise and rte_errno is set. +*/ +static int +flow_dv_validate_action_set_vlan_pcp (uint64_t action_flags, +const struct rte_flow_action actions[], +struct rte_flow_error *error) +{ +const struct rte_flow_action *action = actions; +const struct rte_flow_action_of_set_vlan_pcp *conf = action->conf; + +if (conf->vlan_pcp >7 ) +return rte_flow_error_set (error,EINVAL , +RTE_FLOW_ERROR_TYPE_ACTION , action, +"VLAN PCP value to too big" ); +if (mlx5_flow_find_action (actions, +RTE_FLOW_ACTION_TYPE_OF_PUSH_VLAN ) ==NULL ) +return rte_flow_error_set (error,ENOTSUP , +RTE_FLOW_ERROR_TYPE_ACTION , action, +"set VLAN PCP can only be used " +"with push VLAN action" ); +if (action_flags &MLX5_FLOW_ACTION_OF_PUSH_VLAN ) +return rte_flow_error_set (error,ENOTSUP , +RTE_FLOW_ERROR_TYPE_ACTION , action, +"set VLAN PCP action must precede " +"the push VLAN action" ); +return 0 ; +} + +/** * Validate count action. * * @param[in] dev
@@ -3391,6 +3432,13 @@ struct field_modify_info modify_tcp[] = { action_flags |=MLX5_FLOW_ACTION_OF_PUSH_VLAN ; ++actions_n;break ; +case RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_PCP : + ret =flow_dv_validate_action_set_vlan_pcp + (action_flags, actions, error); +if (ret <0 ) +return ret; +/* Count PCP with push_vlan command. */ +break ;case RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP :case RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP : ret = flow_dv_validate_action_l2_encap(action_flags,
@@ -4980,6 +5028,7 @@ struct field_modify_info modify_tcp[] = {uint32_t modify_action_position =UINT32_MAX ;void *match_mask = matcher.mask.buf;void *match_value = dev_flow->dv.value.buf; +uint16_t vlan_tci;struct flow_dv_vlan_be vlan = {0 };flow_dev_get_vlan_info_from_items (items, &vlan);
@@ -5107,6 +5156,15 @@ struct field_modify_info modify_tcp[] = { dev_flow->dv.push_vlan_res->action; action_flags |=MLX5_FLOW_ACTION_OF_PUSH_VLAN ;break ; +case RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_PCP : + vlan_tci = + ((const struct rte_flow_action_of_set_vlan_pcp *) + actions->conf)->vlan_pcp; + vlan_tci = vlan_tci <<FLOW_DV_VLAN_PCP_SHIFT ; + vlan.tci &= ~FLOW_DV_VLAN_PCP_MASK ; + vlan.tci |=rte_cpu_to_be_16 (vlan_tci); +/* Push VLAN command will use this value */ +break ;case RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP :case RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP : if (flow_dv_create_action_l2_encap(dev, actions,
Signature · 1 line
1.8.3.1
PATCH 6/7 net/mlx5: supp modify VLAN ID on new VLAN header
In reply to Moti HaimovskyThis commit adds support for modifying the VLAN ID (VID) field in an about-to-be-pushed VLAN header.
This feature can only modify the VID field of a new VLAN header yet to be pushed. It does not support modifying an existing or already pushed VLAN headers.
--- drivers/net/mlx5/mlx5_flow_dv.c | 55 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 55 insertions(+)
drivers/net/mlx5/mlx5_flow_dv.c +55 -0
@@ -1024,6 +1024,47 @@ struct field_modify_info modify_tcp[] = { }/** +* Validate the set VLAN VID. +* +* @param[in] action_flags +* Holds the actions detected until now. +* @param[in] actions +* Pointer to the list of actions remaining in the flow rule. +* @param[in] attr +* Pointer to flow attributes +* @param[out] error +* Pointer to error structure. +* +* @return +* 0 on success, a negative errno value otherwise and rte_errno is set. +*/ +static int +flow_dv_validate_action_set_vlan_vid (uint64_t action_flags, +const struct rte_flow_action actions[], +struct rte_flow_error *error) +{ +const struct rte_flow_action *action = actions; +const struct rte_flow_action_of_set_vlan_vid *conf = action->conf; + +if (conf->vlan_vid >RTE_BE16 (0xFFFE )) +return rte_flow_error_set (error,EINVAL , +RTE_FLOW_ERROR_TYPE_ACTION , action, +"VLAN VID value to too big" ); +if (mlx5_flow_find_action (actions, +RTE_FLOW_ACTION_TYPE_OF_PUSH_VLAN ) ==NULL ) +return rte_flow_error_set (error,ENOTSUP , +RTE_FLOW_ERROR_TYPE_ACTION , action, +"set VLAN VID can only be used " +"with push VLAN action" ); +if (action_flags &MLX5_FLOW_ACTION_OF_PUSH_VLAN ) +return rte_flow_error_set (error,ENOTSUP , +RTE_FLOW_ERROR_TYPE_ACTION , action, +"set VLAN VID action must precede " +"the push VLAN action" ); +return 0 ; +} + +/** * Validate count action. * * @param[in] dev
@@ -3439,6 +3480,13 @@ struct field_modify_info modify_tcp[] = {return ret;/* Count PCP with push_vlan command. */ break ; +case RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_VID : + ret =flow_dv_validate_action_set_vlan_vid + (action_flags, actions, error); +if (ret <0 ) +return ret; +/* Count VID with push_vlan command. */ +break ;case RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP :case RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP : ret = flow_dv_validate_action_l2_encap(action_flags,
@@ -5165,6 +5213,13 @@ struct field_modify_info modify_tcp[] = { vlan.tci |=rte_cpu_to_be_16 (vlan_tci);/* Push VLAN command will use this value */ break ; +case RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_VID : + vlan.tci &= ~FLOW_DV_VLAN_VID_MASK ; + vlan.tci |= + ((const struct rte_flow_action_of_set_vlan_vid *) + actions->conf)->vlan_vid; +/* Push VLAN command will use this value */ +break ;case RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP :case RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP : if (flow_dv_create_action_l2_encap(dev, actions,
Signature · 1 line
1.8.3.1
PATCH 7/7 net/mlx5: supp modify VLAN ID on existing VLAN hdr
In reply to Moti HaimovskyThis commit adds support for modifying the VID of the outermost VLAN header already present in the packet.
--- drivers/net/mlx5/mlx5_flow.h | 3 +- drivers/net/mlx5/mlx5_flow_dv.c | 90 +++++++++++++++++++++++++++++++++++------ drivers/net/mlx5/mlx5_prm.h | 1 + 3 files changed, 81 insertions(+), 13 deletions(-)
drivers/net/mlx5/mlx5_flow.h +2 -1
@@ -171,7 +171,8 @@MLX5_FLOW_ACTION_INC_TCP_SEQ | \MLX5_FLOW_ACTION_DEC_TCP_SEQ | \MLX5_FLOW_ACTION_INC_TCP_ACK | \ - MLX5_FLOW_ACTION_DEC_TCP_ACK) +MLX5_FLOW_ACTION_DEC_TCP_ACK | \ + MLX5_FLOW_ACTION_OF_SET_VLAN_VID) #define MLX5_FLOW_VLAN_ACTIONS (MLX5_FLOW_ACTION_OF_POP_VLAN | \MLX5_FLOW_ACTION_OF_PUSH_VLAN )
drivers/net/mlx5/mlx5_flow_dv.c +78 -12
142 lines not on this page · raw message
drivers/net/mlx5/mlx5_prm.h +1 -0
@@ -413,6 +413,7 @@ enum mlx5_modification_field {MLX5_MODI_OUT_DIPV6_31_0 ,MLX5_MODI_OUT_SIPV4 ,MLX5_MODI_OUT_DIPV4 , +MLX5_MODI_OUT_FIRST_VID ,MLX5_MODI_IN_SMAC_47_16 =0x31 ,MLX5_MODI_IN_SMAC_15_0 , MLX5_MODI_IN_ETHERTYPE,
Signature · 1 line
1.8.3.1
v2 cover net/mlx5: support for flow action on VLAN header
In reply to Moti HaimovskyVLAN actions support is implemented in librte_ethdev, and in test-pmd application, based on [1] Generic flow API. These actions conform to the VLAN actions defined in
[2] the OpenFlow Switch Specification.
rte_flow defines the following VLAN actions:
1. OF_POP_VLAN
Pop the outer-most VLAN header from the packet.
2. OF_PUSH_VLAN
Push a new VLAN header onto the packet.
3. OF_SET_VLAN_VID
Sets the ID of the outermost VLAN tag.
4. OF_SET_VLAN_PCP
Sets the 3-bit priority field of the outermost VLAN tag.
This series of patches adds support for those VLAN actions to the mlx5 PMD using the Direct Verbs interface.
v2:
- Code rebase on latest commits.
Moti Haimovsky (7):
net/mlx5: support for an action search in a list net/mlx5: add VLAN push/pop DR commands to glue net/mlx5: support pop flow action on VLAN header net/mlx5: support push flow action on VLAN header net/mlx5: support modify VLAN priority on VLAN hdr net/mlx5: supp modify VLAN ID on new VLAN header net/mlx5: supp modify VLAN ID on existing VLAN hdr
drivers/net/mlx5/Makefile | 5 + drivers/net/mlx5/meson.build | 2 + drivers/net/mlx5/mlx5.c | 9 + drivers/net/mlx5/mlx5.h | 3 + drivers/net/mlx5/mlx5_flow.c | 23 ++ drivers/net/mlx5/mlx5_flow.h | 27 ++- drivers/net/mlx5/mlx5_flow_dv.c | 521 ++++++++++++++++++++++++++++++++++++++++ drivers/net/mlx5/mlx5_glue.c | 29 +++ drivers/net/mlx5/mlx5_glue.h | 6 + drivers/net/mlx5/mlx5_prm.h | 1 + 10 files changed, 623 insertions(+), 3 deletions(-)
Signature · 1 line
1.8.3.1
PATCH v2 1/7 net/mlx5: support for an action search in a list
This commit adds a helper routine that supports searching for a specific action in a list of actions.
--- drivers/net/mlx5/mlx5_flow.c | 23 +++++++++++++++++++++++ drivers/net/mlx5/mlx5_flow.h | 3 +++ 2 files changed, 26 insertions(+)
drivers/net/mlx5/mlx5_flow.c +23 -0
@@ -689,6 +689,29 @@ uint32_t mlx5_flow_adjust_priority(struct rte_eth_dev *dev, int32_t priority, }/* +* return a pointer to the desired action in the list of actions. +* +* @param[in] actions +* The list of actions to search the action in. +* @param[in] action +* The action to find. +* +* @return +* Pointer to the action in the list, if found. NULL otherwise. +*/ +const struct rte_flow_action * +mlx5_flow_find_action (const struct rte_flow_action *actions, +enum rte_flow_action_type action) +{ +if (actions ==NULL ) +return NULL ; +for (; actions->type !=RTE_FLOW_ACTION_TYPE_END ; actions++) +if (actions->type == action) +return actions; +return NULL ; +} + +/* * Validate the flag action. * * @param[in] action_flags
drivers/net/mlx5/mlx5_flow.h +3 -0
@@ -442,6 +442,9 @@ uint64_t mlx5_flow_hashfields_adjust(struct mlx5_flow *dev_flow, int tunnel, uint64_t hash_fields);uint32_t mlx5_flow_adjust_priority (struct rte_eth_dev *dev,int32_t priority,uint32_t subpriority); +const struct rte_flow_action *mlx5_flow_find_action + (const struct rte_flow_action *actions, +enum rte_flow_action_type action);int mlx5_flow_validate_action_count (struct rte_eth_dev *dev,const struct rte_flow_attr *attr,struct rte_flow_error *error);
Signature · 1 line
1.8.3.1
PATCH v2 2/7 net/mlx5: add VLAN push/pop DR commands to glue
In reply to Moti HaimovskyThis commit adds the mlx5dv VLAN push and pop commands to mlx5_glue interface.
--- drivers/net/mlx5/Makefile | 5 +++++ drivers/net/mlx5/meson.build | 2 ++ drivers/net/mlx5/mlx5_glue.c | 29 +++++++++++++++++++++++++++++ drivers/net/mlx5/mlx5_glue.h | 6 ++++++ 4 files changed, 42 insertions(+)
drivers/net/mlx5/Makefile +5 -0
@@ -163,6 +163,11 @@ mlx5_autoconf.h.new: $(RTE_SDK)/buildtools/auto-config-h.sh enum MLX5DV_DR_DOMAIN_TYPE_FDB \ $(AUTOCONF_OUTPUT) $Q sh -- '$<' '$@' \ + HAVE_MLX5DV_DR_VLAN \ + infiniband/mlx5dv.h \ + func mlx5dv_dr_action_create_push_vlan \ + $(AUTOCONF_OUTPUT) + $Q sh -- '$<' '$@' \ HAVE_IBV_DEVX_OBJ \ infiniband/mlx5dv.h \ func mlx5dv_devx_obj_create \
drivers/net/mlx5/meson.build +2 -0
@@ -130,6 +130,8 @@ if build 'MLX5DV_DR_DOMAIN_TYPE_NIC_RX' ], [ 'HAVE_MLX5DV_DR_ESWITCH', 'infiniband/mlx5dv.h', 'MLX5DV_DR_DOMAIN_TYPE_FDB' ], + [ 'HAVE_MLX5DV_DR_VLAN', 'infiniband/mlx5dv.h', + 'mlx5dv_dr_action_create_push_vlan' ], [ 'HAVE_SUPPORTED_40000baseKR4_Full', 'linux/ethtool.h', 'SUPPORTED_40000baseKR4_Full' ], [ 'HAVE_SUPPORTED_40000baseCR4_Full', 'linux/ethtool.h',
drivers/net/mlx5/mlx5_glue.c +29 -0
@@ -415,6 +415,31 @@ }static void * +mlx5_glue_dr_create_flow_action_push_vlan (struct mlx5dv_dr_domain *domain, +rte_be32_t vlan_tag) +{ +#ifdef HAVE_MLX5DV_DR_VLAN +return mlx5dv_dr_action_create_push_vlan (domain, vlan_tag); +#else + (void )domain; + (void )vlan_tag; + errno =ENOTSUP ; +return NULL ; +#endif +} + +static void * +mlx5_glue_dr_create_flow_action_pop_vlan (void ) +{ +#ifdef HAVE_MLX5DV_DR_VLAN +return mlx5dv_dr_action_create_pop_vlan (); +#else + errno =ENOTSUP ; +return NULL ; +#endif +} + +static void *mlx5_glue_dr_create_flow_tbl (void *domain,uint32_t level) {#ifdef HAVE_MLX5DV_DR
@@ -1016,6 +1041,10 @@ mlx5_glue_dr_create_flow_action_dest_vport, .dr_create_flow_action_drop = mlx5_glue_dr_create_flow_action_drop, + .dr_create_flow_action_push_vlan = + mlx5_glue_dr_create_flow_action_push_vlan, + .dr_create_flow_action_pop_vlan = + mlx5_glue_dr_create_flow_action_pop_vlan, .dr_create_flow_tbl = mlx5_glue_dr_create_flow_tbl, .dr_destroy_flow_tbl = mlx5_glue_dr_destroy_flow_tbl, .dr_create_domain = mlx5_glue_dr_create_domain,
drivers/net/mlx5/mlx5_glue.h +6 -0
@@ -9,6 +9,8 @@#include <stddef.h> #include <stdint.h> +#include "rte_byteorder.h" +/* Verbs headers do not support -pedantic. */ #ifdef PEDANTIC #pragma GCC diagnostic ignored "-Wpedantic"
@@ -156,6 +158,10 @@ struct mlx5_glue {void *(*dr_create_flow_action_dest_flow_tbl)(void *tbl);void *(*dr_create_flow_action_dest_vport)(void *domain,uint32_t vport);void *(*dr_create_flow_action_drop)(); +void *(*dr_create_flow_action_push_vlan) + (struct mlx5dv_dr_domain *domain, +rte_be32_t vlan_tag); +void *(*dr_create_flow_action_pop_vlan)();void *(*dr_create_flow_tbl)(void *domain,uint32_t level);int (*dr_destroy_flow_tbl)(void *tbl); void *(*dr_create_domain)(struct ibv_context *ctx,
Signature · 1 line
1.8.3.1
PATCH v2 3/7 net/mlx5: support pop flow action on VLAN header
In reply to Moti HaimovskyThis commit adds support for RTE_FLOW_ACTION_TYPE_OF_POP_VLAN via direct verbs flow rules.
--- drivers/net/mlx5/mlx5.c | 9 +++++ drivers/net/mlx5/mlx5.h | 1 + drivers/net/mlx5/mlx5_flow.h | 5 ++- drivers/net/mlx5/mlx5_flow_dv.c | 78 +++++++++++++++++++++++++++++++++++++++++ 4 files changed, 92 insertions(+), 1 deletion(-)
drivers/net/mlx5/mlx5.c +9 -0
@@ -549,6 +549,7 @@ struct mlx5_dev_spawn_data { sh->esw_drop_action = mlx5_glue->dr_create_flow_action_drop(); }#endif + sh->pop_vlan_action = mlx5_glue->dr_create_flow_action_pop_vlan (); sh->dv_refcnt++; priv->dr_shared =1 ;return 0 ;
@@ -571,6 +572,10 @@ struct mlx5_dev_spawn_data { mlx5_glue->destroy_flow_action (sh->esw_drop_action); sh->esw_drop_action = NULL; } +if (sh->pop_vlan_action) { + mlx5_glue->destroy_flow_action (sh->pop_vlan_action); + sh->pop_vlan_action =NULL ; + }return err;#else (void )priv;
@@ -616,6 +621,10 @@ struct mlx5_dev_spawn_data { sh->esw_drop_action = NULL; }#endif +if (sh->pop_vlan_action) { + mlx5_glue->destroy_flow_action (sh->pop_vlan_action); + sh->pop_vlan_action =NULL ; + }pthread_mutex_destroy (&sh->dv_mutex);#else (void )priv;
drivers/net/mlx5/mlx5.h +1 -0
@@ -570,6 +570,7 @@ struct mlx5_ibv_shared {void *tx_domain;/* TX Direct Rules name space handle. */ struct mlx5_flow_tbl_resource tx_tbl[MLX5_MAX_TABLES ];void *esw_drop_action;/* Pointer to DR E-Switch drop action. */ +void *pop_vlan_action;/* Pointer to DR pop VLAN action. */ /* TX Direct Rules tables/ */ LIST_HEAD(matchers, mlx5_flow_dv_matcher) matchers; LIST_HEAD(encap_decap, mlx5_flow_dv_encap_decap_resource) encaps_decaps;
drivers/net/mlx5/mlx5_flow.h +4 -1
@@ -154,7 +154,8 @@#define MLX5_FLOW_DECAP_ACTIONS (MLX5_FLOW_ACTION_VXLAN_DECAP | \ MLX5_FLOW_ACTION_NVGRE_DECAP | \ - MLX5_FLOW_ACTION_RAW_DECAP) + MLX5_FLOW_ACTION_RAW_DECAP | \ + MLX5_FLOW_ACTION_OF_POP_VLAN)#define MLX5_FLOW_MODIFY_HDR_ACTIONS (MLX5_FLOW_ACTION_SET_IPV4_SRC | \ MLX5_FLOW_ACTION_SET_IPV4_DST | \
@@ -171,6 +172,8 @@ MLX5_FLOW_ACTION_INC_TCP_ACK | \ MLX5_FLOW_ACTION_DEC_TCP_ACK) +#define MLX5_FLOW_VLAN_ACTIONS (MLX5_FLOW_ACTION_OF_POP_VLAN) +#ifndef IPPROTO_MPLS #define IPPROTO_MPLS 137#endif
drivers/net/mlx5/mlx5_flow_dv.c +78 -0
102 lines not on this page · raw message
Signature · 1 line
1.8.3.1
PATCH v2 4/7 net/mlx5: support push flow action on VLAN header
In reply to Moti HaimovskyThis commit adds support for RTE_FLOW_ACTION_TYPE_OF_PUSH_VLAN using direct verbs flow rules.
If present in the flow, The VLAN default values are taken from the VLAN item configuration.
In this commit only the VLAN TPID value can be set since VLAN modification actions are not supported yet.
--- drivers/net/mlx5/mlx5.h | 2 + drivers/net/mlx5/mlx5_flow.h | 18 ++- drivers/net/mlx5/mlx5_flow_dv.c | 264 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 282 insertions(+), 2 deletions(-)
drivers/net/mlx5/mlx5.h +2 -0
@@ -579,6 +579,8 @@ struct mlx5_ibv_shared { LIST_HEAD(jump, mlx5_flow_dv_jump_tbl_resource) jump_tbl; LIST_HEAD(port_id_action_list, mlx5_flow_dv_port_id_action_resource) port_id_action_list;/* List of port ID actions. */ + LIST_HEAD(push_vlan_action_list, mlx5_flow_dv_push_vlan_action_resource) + push_vlan_action_list;/* List of push VLAN actions. */ struct mlx5_flow_counter_mng cmng;/* Counters management structure. */ /* Shared interrupt handler section. */ pthread_mutex_t intr_mutex;/* Interrupt config mutex. */
drivers/net/mlx5/mlx5_flow.h +16 -2
@@ -150,7 +150,8 @@#define MLX5_FLOW_ENCAP_ACTIONS (MLX5_FLOW_ACTION_VXLAN_ENCAP | \ MLX5_FLOW_ACTION_NVGRE_ENCAP | \ - MLX5_FLOW_ACTION_RAW_ENCAP) + MLX5_FLOW_ACTION_RAW_ENCAP | \ + MLX5_FLOW_ACTION_OF_PUSH_VLAN)#define MLX5_FLOW_DECAP_ACTIONS (MLX5_FLOW_ACTION_VXLAN_DECAP | \ MLX5_FLOW_ACTION_NVGRE_DECAP | \
@@ -172,7 +173,8 @@ MLX5_FLOW_ACTION_INC_TCP_ACK | \ MLX5_FLOW_ACTION_DEC_TCP_ACK) -#define MLX5_FLOW_VLAN_ACTIONS (MLX5_FLOW_ACTION_OF_POP_VLAN) +#define MLX5_FLOW_VLAN_ACTIONS (MLX5_FLOW_ACTION_OF_POP_VLAN | \ + MLX5_FLOW_ACTION_OF_PUSH_VLAN)#ifndef IPPROTO_MPLS #define IPPROTO_MPLS 137
@@ -309,6 +311,16 @@ struct mlx5_flow_dv_port_id_action_resource {uint32_t port_id;/**< Port ID value. */ }; +/* Push VLAN action resource structure */ +struct mlx5_flow_dv_push_vlan_action_resource { +LIST_ENTRY (mlx5_flow_dv_push_vlan_action_resource) next; +/* Pointer to next element. */ +rte_atomic32_t refcnt;/**< Reference counter. */ +void *action;/**< Direct verbs action object. */ +uint8_t ft_type;/**< Flow table type, Rx, Tx or FDB. */ +rte_be32_t vlan_tag;/**< VLAN tag value. */ +}; +/* * Max number of actions per DV flow. * See CREATE_FLOW_MAX_FLOW_ACTIONS_SUPPORTED
@@ -335,6 +347,8 @@ struct mlx5_flow_dv {/**< Pointer to port ID action resource. */ struct mlx5_vf_vlan vf_vlan;/**< Structure for VF VLAN workaround. */ +struct mlx5_flow_dv_push_vlan_action_resource *push_vlan_res; +/**< Pointer to push VLAN action resource in cache. */ #ifdef HAVE_IBV_FLOW_DV_SUPPORT void *actions[MLX5_DV_MAX_NUMBER_OF_ACTIONS ];/**< Action list. */
drivers/net/mlx5/mlx5_flow_dv.c +264 -0
325 lines not on this page · raw message
Signature · 1 line
1.8.3.1
PATCH v2 5/7 net/mlx5: support modify VLAN priority on VLAN hdr
In reply to Moti HaimovskyThis commit adds support for modifying the VLAN priority (PCP) field in about-to-be-pushed VLAN header.
This feature can only modify the PCP field of a new VLAN header yet to be pushed. It does not support modifying an existing or already pushed VLAN headers.
--- drivers/net/mlx5/mlx5_flow_dv.c | 58 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 58 insertions(+)
drivers/net/mlx5/mlx5_flow_dv.c +58 -0
@@ -967,6 +967,47 @@ struct field_modify_info modify_tcp[] = { }/** +* Validate the set VLAN PCP. +* +* @param[in] action_flags +* Holds the actions detected until now. +* @param[in] actions +* Pointer to the list of actions remaining in the flow rule. +* @param[in] attr +* Pointer to flow attributes +* @param[out] error +* Pointer to error structure. +* +* @return +* 0 on success, a negative errno value otherwise and rte_errno is set. +*/ +static int +flow_dv_validate_action_set_vlan_pcp (uint64_t action_flags, +const struct rte_flow_action actions[], +struct rte_flow_error *error) +{ +const struct rte_flow_action *action = actions; +const struct rte_flow_action_of_set_vlan_pcp *conf = action->conf; + +if (conf->vlan_pcp >7 ) +return rte_flow_error_set (error,EINVAL , +RTE_FLOW_ERROR_TYPE_ACTION , action, +"VLAN PCP value to too big" ); +if (mlx5_flow_find_action (actions, +RTE_FLOW_ACTION_TYPE_OF_PUSH_VLAN ) ==NULL ) +return rte_flow_error_set (error,ENOTSUP , +RTE_FLOW_ERROR_TYPE_ACTION , action, +"set VLAN PCP can only be used " +"with push VLAN action" ); +if (action_flags &MLX5_FLOW_ACTION_OF_PUSH_VLAN ) +return rte_flow_error_set (error,ENOTSUP , +RTE_FLOW_ERROR_TYPE_ACTION , action, +"set VLAN PCP action must precede " +"the push VLAN action" ); +return 0 ; +} + +/** * Validate count action. * * @param[in] dev
@@ -3383,6 +3424,13 @@ struct field_modify_info modify_tcp[] = { action_flags |=MLX5_FLOW_ACTION_OF_PUSH_VLAN ; ++actions_n;break ; +case RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_PCP : + ret =flow_dv_validate_action_set_vlan_pcp + (action_flags, actions, error); +if (ret <0 ) +return ret; +/* Count PCP with push_vlan command. */ +break ;case RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP :case RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP : ret = flow_dv_validate_action_l2_encap(action_flags,
@@ -4973,6 +5021,7 @@ struct field_modify_info modify_tcp[] = {void *match_mask = matcher.mask.buf;void *match_value = dev_flow->dv.value.buf;uint8_t next_protocol =0xff ; +uint16_t vlan_tci;struct flow_dv_vlan_be vlan = {0 };flow_dev_get_vlan_info_from_items (items, &vlan);
@@ -5100,6 +5149,15 @@ struct field_modify_info modify_tcp[] = { dev_flow->dv.push_vlan_res->action; action_flags |=MLX5_FLOW_ACTION_OF_PUSH_VLAN ;break ; +case RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_PCP : + vlan_tci = + ((const struct rte_flow_action_of_set_vlan_pcp *) + actions->conf)->vlan_pcp; + vlan_tci = vlan_tci <<FLOW_DV_VLAN_PCP_SHIFT ; + vlan.tci &= ~FLOW_DV_VLAN_PCP_MASK ; + vlan.tci |=rte_cpu_to_be_16 (vlan_tci); +/* Push VLAN command will use this value */ +break ;case RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP :case RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP : if (flow_dv_create_action_l2_encap(dev, actions,
Signature · 1 line
1.8.3.1
PATCH v2 6/7 net/mlx5: supp modify VLAN ID on new VLAN header
In reply to Moti HaimovskyThis commit adds support for modifying the VLAN ID (VID) field in an about-to-be-pushed VLAN header.
This feature can only modify the VID field of a new VLAN header yet to be pushed. It does not support modifying an existing or already pushed VLAN headers.
--- drivers/net/mlx5/mlx5_flow_dv.c | 55 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 55 insertions(+)
drivers/net/mlx5/mlx5_flow_dv.c +55 -0
@@ -1008,6 +1008,47 @@ struct field_modify_info modify_tcp[] = { }/** +* Validate the set VLAN VID. +* +* @param[in] action_flags +* Holds the actions detected until now. +* @param[in] actions +* Pointer to the list of actions remaining in the flow rule. +* @param[in] attr +* Pointer to flow attributes +* @param[out] error +* Pointer to error structure. +* +* @return +* 0 on success, a negative errno value otherwise and rte_errno is set. +*/ +static int +flow_dv_validate_action_set_vlan_vid (uint64_t action_flags, +const struct rte_flow_action actions[], +struct rte_flow_error *error) +{ +const struct rte_flow_action *action = actions; +const struct rte_flow_action_of_set_vlan_vid *conf = action->conf; + +if (conf->vlan_vid >RTE_BE16 (0xFFFE )) +return rte_flow_error_set (error,EINVAL , +RTE_FLOW_ERROR_TYPE_ACTION , action, +"VLAN VID value to too big" ); +if (mlx5_flow_find_action (actions, +RTE_FLOW_ACTION_TYPE_OF_PUSH_VLAN ) ==NULL ) +return rte_flow_error_set (error,ENOTSUP , +RTE_FLOW_ERROR_TYPE_ACTION , action, +"set VLAN VID can only be used " +"with push VLAN action" ); +if (action_flags &MLX5_FLOW_ACTION_OF_PUSH_VLAN ) +return rte_flow_error_set (error,ENOTSUP , +RTE_FLOW_ERROR_TYPE_ACTION , action, +"set VLAN VID action must precede " +"the push VLAN action" ); +return 0 ; +} + +/** * Validate count action. * * @param[in] dev
@@ -3431,6 +3472,13 @@ struct field_modify_info modify_tcp[] = {return ret;/* Count PCP with push_vlan command. */ break ; +case RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_VID : + ret =flow_dv_validate_action_set_vlan_vid + (action_flags, actions, error); +if (ret <0 ) +return ret; +/* Count VID with push_vlan command. */ +break ;case RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP :case RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP : ret = flow_dv_validate_action_l2_encap(action_flags,
@@ -5158,6 +5206,13 @@ struct field_modify_info modify_tcp[] = { vlan.tci |=rte_cpu_to_be_16 (vlan_tci);/* Push VLAN command will use this value */ break ; +case RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_VID : + vlan.tci &= ~FLOW_DV_VLAN_VID_MASK ; + vlan.tci |= + ((const struct rte_flow_action_of_set_vlan_vid *) + actions->conf)->vlan_vid; +/* Push VLAN command will use this value */ +break ;case RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP :case RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP : if (flow_dv_create_action_l2_encap(dev, actions,
Signature · 1 line
1.8.3.1
PATCH v2 7/7 net/mlx5: supp modify VLAN ID on existing VLAN hdr
In reply to Moti HaimovskyThis commit adds support for modifying the VID of the outermost VLAN header already present in the packet.
--- drivers/net/mlx5/mlx5_flow.h | 3 +- drivers/net/mlx5/mlx5_flow_dv.c | 90 +++++++++++++++++++++++++++++++++++------ drivers/net/mlx5/mlx5_prm.h | 1 + 3 files changed, 81 insertions(+), 13 deletions(-)
drivers/net/mlx5/mlx5_flow.h +2 -1
@@ -171,7 +171,8 @@MLX5_FLOW_ACTION_INC_TCP_SEQ | \MLX5_FLOW_ACTION_DEC_TCP_SEQ | \MLX5_FLOW_ACTION_INC_TCP_ACK | \ - MLX5_FLOW_ACTION_DEC_TCP_ACK) +MLX5_FLOW_ACTION_DEC_TCP_ACK | \ + MLX5_FLOW_ACTION_OF_SET_VLAN_VID) #define MLX5_FLOW_VLAN_ACTIONS (MLX5_FLOW_ACTION_OF_POP_VLAN | \MLX5_FLOW_ACTION_OF_PUSH_VLAN )
drivers/net/mlx5/mlx5_flow_dv.c +78 -12
142 lines not on this page · raw message
drivers/net/mlx5/mlx5_prm.h +1 -0
@@ -413,6 +413,7 @@ enum mlx5_modification_field {MLX5_MODI_OUT_DIPV6_31_0 ,MLX5_MODI_OUT_SIPV4 ,MLX5_MODI_OUT_DIPV4 , +MLX5_MODI_OUT_FIRST_VID ,MLX5_MODI_IN_SMAC_47_16 =0x31 ,MLX5_MODI_IN_SMAC_15_0 , MLX5_MODI_IN_ETHERTYPE,
Signature · 1 line
1.8.3.1
v3 cover net/mlx5: support for flow action on VLAN header
In reply to Moti HaimovskyVLAN actions support is implemented in librte_ethdev, and in test-pmd application, based on [1] Generic flow API. These actions conform to the VLAN actions defined in
[2] the OpenFlow Switch Specification.
rte_flow defines the following VLAN actions:
1. OF_POP_VLAN
Pop the outer-most VLAN header from the packet.
2. OF_PUSH_VLAN
Push a new VLAN header onto the packet.
3. OF_SET_VLAN_VID
Sets the ID of the outermost VLAN tag.
4. OF_SET_VLAN_PCP
Sets the 3-bit priority field of the outermost VLAN tag.
This series of patches adds support for those VLAN actions to the mlx5 PMD using the Direct Verbs interface.
v2:
- Code rebase on latest commits.
v3:
- mlx5 documentation update.
Moti Haimovsky (7):
net/mlx5: support for an action search in a list net/mlx5: add VLAN push/pop DR commands to glue net/mlx5: support pop flow action on VLAN header net/mlx5: support push flow action on VLAN header net/mlx5: support modify VLAN priority on VLAN hdr net/mlx5: supp modify VLAN ID on new VLAN header net/mlx5: supp modify VLAN ID on existing VLAN hdr
doc/guides/nics/mlx5.rst | 30 ++- drivers/net/mlx5/Makefile | 5 + drivers/net/mlx5/meson.build | 2 + drivers/net/mlx5/mlx5.c | 9 + drivers/net/mlx5/mlx5.h | 3 + drivers/net/mlx5/mlx5_flow.c | 23 ++ drivers/net/mlx5/mlx5_flow.h | 27 ++- drivers/net/mlx5/mlx5_flow_dv.c | 521 ++++++++++++++++++++++++++++++++++++++++ drivers/net/mlx5/mlx5_glue.c | 29 +++ drivers/net/mlx5/mlx5_glue.h | 6 + drivers/net/mlx5/mlx5_prm.h | 1 + 11 files changed, 646 insertions(+), 10 deletions(-)
Signature · 1 line
1.8.3.1
PATCH v3 1/7 net/mlx5: support for an action search in a list
This commit adds a helper routine that supports searching for a specific action in a list of actions.
--- drivers/net/mlx5/mlx5_flow.c | 23 +++++++++++++++++++++++ drivers/net/mlx5/mlx5_flow.h | 3 +++ 2 files changed, 26 insertions(+)
drivers/net/mlx5/mlx5_flow.c +23 -0
@@ -689,6 +689,29 @@ uint32_t mlx5_flow_adjust_priority(struct rte_eth_dev *dev, int32_t priority, }/* +* return a pointer to the desired action in the list of actions. +* +* @param[in] actions +* The list of actions to search the action in. +* @param[in] action +* The action to find. +* +* @return +* Pointer to the action in the list, if found. NULL otherwise. +*/ +const struct rte_flow_action * +mlx5_flow_find_action (const struct rte_flow_action *actions, +enum rte_flow_action_type action) +{ +if (actions ==NULL ) +return NULL ; +for (; actions->type !=RTE_FLOW_ACTION_TYPE_END ; actions++) +if (actions->type == action) +return actions; +return NULL ; +} + +/* * Validate the flag action. * * @param[in] action_flags
drivers/net/mlx5/mlx5_flow.h +3 -0
@@ -442,6 +442,9 @@ uint64_t mlx5_flow_hashfields_adjust(struct mlx5_flow *dev_flow, int tunnel, uint64_t hash_fields);uint32_t mlx5_flow_adjust_priority (struct rte_eth_dev *dev,int32_t priority,uint32_t subpriority); +const struct rte_flow_action *mlx5_flow_find_action + (const struct rte_flow_action *actions, +enum rte_flow_action_type action);int mlx5_flow_validate_action_count (struct rte_eth_dev *dev,const struct rte_flow_attr *attr,struct rte_flow_error *error);
Signature · 1 line
1.8.3.1
PATCH v3 2/7 net/mlx5: add VLAN push/pop DR commands to glue
In reply to Moti HaimovskyThis commit adds the mlx5dv VLAN push and pop commands to mlx5_glue interface.
--- drivers/net/mlx5/Makefile | 5 +++++ drivers/net/mlx5/meson.build | 2 ++ drivers/net/mlx5/mlx5_glue.c | 29 +++++++++++++++++++++++++++++ drivers/net/mlx5/mlx5_glue.h | 6 ++++++ 4 files changed, 42 insertions(+)
drivers/net/mlx5/Makefile +5 -0
@@ -163,6 +163,11 @@ mlx5_autoconf.h.new: $(RTE_SDK)/buildtools/auto-config-h.sh enum MLX5DV_DR_DOMAIN_TYPE_FDB \ $(AUTOCONF_OUTPUT) $Q sh -- '$<' '$@' \ + HAVE_MLX5DV_DR_VLAN \ + infiniband/mlx5dv.h \ + func mlx5dv_dr_action_create_push_vlan \ + $(AUTOCONF_OUTPUT) + $Q sh -- '$<' '$@' \ HAVE_IBV_DEVX_OBJ \ infiniband/mlx5dv.h \ func mlx5dv_devx_obj_create \
drivers/net/mlx5/meson.build +2 -0
@@ -130,6 +130,8 @@ if build 'MLX5DV_DR_DOMAIN_TYPE_NIC_RX' ], [ 'HAVE_MLX5DV_DR_ESWITCH', 'infiniband/mlx5dv.h', 'MLX5DV_DR_DOMAIN_TYPE_FDB' ], + [ 'HAVE_MLX5DV_DR_VLAN', 'infiniband/mlx5dv.h', + 'mlx5dv_dr_action_create_push_vlan' ], [ 'HAVE_SUPPORTED_40000baseKR4_Full', 'linux/ethtool.h', 'SUPPORTED_40000baseKR4_Full' ], [ 'HAVE_SUPPORTED_40000baseCR4_Full', 'linux/ethtool.h',
drivers/net/mlx5/mlx5_glue.c +29 -0
@@ -415,6 +415,31 @@ }static void * +mlx5_glue_dr_create_flow_action_push_vlan (struct mlx5dv_dr_domain *domain, +rte_be32_t vlan_tag) +{ +#ifdef HAVE_MLX5DV_DR_VLAN +return mlx5dv_dr_action_create_push_vlan (domain, vlan_tag); +#else + (void )domain; + (void )vlan_tag; + errno =ENOTSUP ; +return NULL ; +#endif +} + +static void * +mlx5_glue_dr_create_flow_action_pop_vlan (void ) +{ +#ifdef HAVE_MLX5DV_DR_VLAN +return mlx5dv_dr_action_create_pop_vlan (); +#else + errno =ENOTSUP ; +return NULL ; +#endif +} + +static void *mlx5_glue_dr_create_flow_tbl (void *domain,uint32_t level) {#ifdef HAVE_MLX5DV_DR
@@ -1016,6 +1041,10 @@ mlx5_glue_dr_create_flow_action_dest_vport, .dr_create_flow_action_drop = mlx5_glue_dr_create_flow_action_drop, + .dr_create_flow_action_push_vlan = + mlx5_glue_dr_create_flow_action_push_vlan, + .dr_create_flow_action_pop_vlan = + mlx5_glue_dr_create_flow_action_pop_vlan, .dr_create_flow_tbl = mlx5_glue_dr_create_flow_tbl, .dr_destroy_flow_tbl = mlx5_glue_dr_destroy_flow_tbl, .dr_create_domain = mlx5_glue_dr_create_domain,
drivers/net/mlx5/mlx5_glue.h +6 -0
@@ -9,6 +9,8 @@#include <stddef.h> #include <stdint.h> +#include "rte_byteorder.h" +/* Verbs headers do not support -pedantic. */ #ifdef PEDANTIC #pragma GCC diagnostic ignored "-Wpedantic"
@@ -156,6 +158,10 @@ struct mlx5_glue {void *(*dr_create_flow_action_dest_flow_tbl)(void *tbl);void *(*dr_create_flow_action_dest_vport)(void *domain,uint32_t vport);void *(*dr_create_flow_action_drop)(); +void *(*dr_create_flow_action_push_vlan) + (struct mlx5dv_dr_domain *domain, +rte_be32_t vlan_tag); +void *(*dr_create_flow_action_pop_vlan)();void *(*dr_create_flow_tbl)(void *domain,uint32_t level);int (*dr_destroy_flow_tbl)(void *tbl); void *(*dr_create_domain)(struct ibv_context *ctx,
Signature · 1 line
1.8.3.1
PATCH v3 3/7 net/mlx5: support pop flow action on VLAN header
In reply to Moti HaimovskyThis commit adds support for RTE_FLOW_ACTION_TYPE_OF_POP_VLAN via direct verbs flow rules.
--- doc/guides/nics/mlx5.rst | 6 ++++ drivers/net/mlx5/mlx5.c | 9 +++++ drivers/net/mlx5/mlx5.h | 1 + drivers/net/mlx5/mlx5_flow.h | 5 ++- drivers/net/mlx5/mlx5_flow_dv.c | 78 +++++++++++++++++++++++++++++++++++++++++ 5 files changed, 98 insertions(+), 1 deletion(-)
doc/guides/nics/mlx5.rst +6 -0
@@ -124,6 +124,8 @@ Limitations Will match any ipv4 packet (VLAN included). +- VLAN pop offload is not supported on egress traffic. + - A multi segment packet must have not more segments than reported by dev_infos_get() in tx_desc_lim.nb_seg_max field. This value depends on maximal supported Tx descriptor size and ``txq_inline_min`` settings and may be from 2 (worst case forced by maximal
@@ -1032,6 +1034,10 @@ Supported hardware offloads | | | rdma-core 24 | | N/A | | | | ConnectX-5 | | N/A | +-----------------------+-----------------+-----------------+ + | | VLAN | | DPDK 19.11 | | DPDK 19.11 | + | | (of_pop_vlan) | | OFED 4.6-4 | | OFED 4.6-4 | + | | | ConnectX-5 | | ConnectX-5 | + +-----------------------+-----------------+-----------------+ Notes for testpmd -----------------
drivers/net/mlx5/mlx5.c +9 -0
@@ -549,6 +549,7 @@ struct mlx5_dev_spawn_data { sh->esw_drop_action = mlx5_glue->dr_create_flow_action_drop(); }#endif + sh->pop_vlan_action = mlx5_glue->dr_create_flow_action_pop_vlan (); sh->dv_refcnt++; priv->dr_shared =1 ;return 0 ;
@@ -571,6 +572,10 @@ struct mlx5_dev_spawn_data { mlx5_glue->destroy_flow_action (sh->esw_drop_action); sh->esw_drop_action = NULL; } +if (sh->pop_vlan_action) { + mlx5_glue->destroy_flow_action (sh->pop_vlan_action); + sh->pop_vlan_action =NULL ; + }return err;#else (void )priv;
@@ -616,6 +621,10 @@ struct mlx5_dev_spawn_data { sh->esw_drop_action = NULL; }#endif +if (sh->pop_vlan_action) { + mlx5_glue->destroy_flow_action (sh->pop_vlan_action); + sh->pop_vlan_action =NULL ; + }pthread_mutex_destroy (&sh->dv_mutex);#else (void )priv;
drivers/net/mlx5/mlx5.h +1 -0
@@ -570,6 +570,7 @@ struct mlx5_ibv_shared {void *tx_domain;/* TX Direct Rules name space handle. */ struct mlx5_flow_tbl_resource tx_tbl[MLX5_MAX_TABLES ];void *esw_drop_action;/* Pointer to DR E-Switch drop action. */ +void *pop_vlan_action;/* Pointer to DR pop VLAN action. */ /* TX Direct Rules tables/ */ LIST_HEAD(matchers, mlx5_flow_dv_matcher) matchers; LIST_HEAD(encap_decap, mlx5_flow_dv_encap_decap_resource) encaps_decaps;
drivers/net/mlx5/mlx5_flow.h +4 -1
@@ -154,7 +154,8 @@#define MLX5_FLOW_DECAP_ACTIONS (MLX5_FLOW_ACTION_VXLAN_DECAP | \ MLX5_FLOW_ACTION_NVGRE_DECAP | \ - MLX5_FLOW_ACTION_RAW_DECAP) + MLX5_FLOW_ACTION_RAW_DECAP | \ + MLX5_FLOW_ACTION_OF_POP_VLAN)#define MLX5_FLOW_MODIFY_HDR_ACTIONS (MLX5_FLOW_ACTION_SET_IPV4_SRC | \ MLX5_FLOW_ACTION_SET_IPV4_DST | \
@@ -171,6 +172,8 @@ MLX5_FLOW_ACTION_INC_TCP_ACK | \ MLX5_FLOW_ACTION_DEC_TCP_ACK) +#define MLX5_FLOW_VLAN_ACTIONS (MLX5_FLOW_ACTION_OF_POP_VLAN) +#ifndef IPPROTO_MPLS #define IPPROTO_MPLS 137#endif
drivers/net/mlx5/mlx5_flow_dv.c +78 -0
102 lines not on this page · raw message
Signature · 1 line
1.8.3.1
PATCH v3 4/7 net/mlx5: support push flow action on VLAN header
In reply to Moti HaimovskyThis commit adds support for RTE_FLOW_ACTION_TYPE_OF_PUSH_VLAN using direct verbs flow rules.
If present in the flow, The VLAN default values are taken from the VLAN item configuration.
In this commit only the VLAN TPID value can be set since VLAN modification actions are not supported yet.
--- doc/guides/nics/mlx5.rst | 6 +- drivers/net/mlx5/mlx5.h | 2 + drivers/net/mlx5/mlx5_flow.h | 18 ++- drivers/net/mlx5/mlx5_flow_dv.c | 264 ++++++++++++++++++++++++++++++++++++++++ 4 files changed, 286 insertions(+), 4 deletions(-)
doc/guides/nics/mlx5.rst +4 -2
@@ -126,6 +126,8 @@ Limitations - VLAN pop offload is not supported on egress traffic. +- VLAN push offload is not supported on ingress traffic. + - A multi segment packet must have not more segments than reported by dev_infos_get() in tx_desc_lim.nb_seg_max field. This value depends on maximal supported Tx descriptor size and ``txq_inline_min`` settings and may be from 2 (worst case forced by maximal
@@ -1035,8 +1037,8 @@ Supported hardware offloads | | | ConnectX-5 | | N/A | +-----------------------+-----------------+-----------------+ | | VLAN | | DPDK 19.11 | | DPDK 19.11 | - | | (of_pop_vlan) | | OFED 4.6-4 | | OFED 4.6-4 | - | | | ConnectX-5 | | ConnectX-5 | + | | (of_pop_vlan / | | OFED 4.6-4 | | OFED 4.6-4 | + | | of_push_vlan) | | ConnectX-5 | | ConnectX-5 | +-----------------------+-----------------+-----------------+ Notes for testpmd
drivers/net/mlx5/mlx5.h +2 -0
@@ -579,6 +579,8 @@ struct mlx5_ibv_shared { LIST_HEAD(jump, mlx5_flow_dv_jump_tbl_resource) jump_tbl; LIST_HEAD(port_id_action_list, mlx5_flow_dv_port_id_action_resource) port_id_action_list;/* List of port ID actions. */ + LIST_HEAD(push_vlan_action_list, mlx5_flow_dv_push_vlan_action_resource) + push_vlan_action_list;/* List of push VLAN actions. */ struct mlx5_flow_counter_mng cmng;/* Counters management structure. */ /* Shared interrupt handler section. */ pthread_mutex_t intr_mutex;/* Interrupt config mutex. */
drivers/net/mlx5/mlx5_flow.h +16 -2
@@ -150,7 +150,8 @@#define MLX5_FLOW_ENCAP_ACTIONS (MLX5_FLOW_ACTION_VXLAN_ENCAP | \ MLX5_FLOW_ACTION_NVGRE_ENCAP | \ - MLX5_FLOW_ACTION_RAW_ENCAP) + MLX5_FLOW_ACTION_RAW_ENCAP | \ + MLX5_FLOW_ACTION_OF_PUSH_VLAN)#define MLX5_FLOW_DECAP_ACTIONS (MLX5_FLOW_ACTION_VXLAN_DECAP | \ MLX5_FLOW_ACTION_NVGRE_DECAP | \
@@ -172,7 +173,8 @@ MLX5_FLOW_ACTION_INC_TCP_ACK | \ MLX5_FLOW_ACTION_DEC_TCP_ACK) -#define MLX5_FLOW_VLAN_ACTIONS (MLX5_FLOW_ACTION_OF_POP_VLAN) +#define MLX5_FLOW_VLAN_ACTIONS (MLX5_FLOW_ACTION_OF_POP_VLAN | \ + MLX5_FLOW_ACTION_OF_PUSH_VLAN)#ifndef IPPROTO_MPLS #define IPPROTO_MPLS 137
@@ -309,6 +311,16 @@ struct mlx5_flow_dv_port_id_action_resource {uint32_t port_id;/**< Port ID value. */ }; +/* Push VLAN action resource structure */ +struct mlx5_flow_dv_push_vlan_action_resource { +LIST_ENTRY (mlx5_flow_dv_push_vlan_action_resource) next; +/* Pointer to next element. */ +rte_atomic32_t refcnt;/**< Reference counter. */ +void *action;/**< Direct verbs action object. */ +uint8_t ft_type;/**< Flow table type, Rx, Tx or FDB. */ +rte_be32_t vlan_tag;/**< VLAN tag value. */ +}; +/* * Max number of actions per DV flow. * See CREATE_FLOW_MAX_FLOW_ACTIONS_SUPPORTED
@@ -335,6 +347,8 @@ struct mlx5_flow_dv {/**< Pointer to port ID action resource. */ struct mlx5_vf_vlan vf_vlan;/**< Structure for VF VLAN workaround. */ +struct mlx5_flow_dv_push_vlan_action_resource *push_vlan_res; +/**< Pointer to push VLAN action resource in cache. */ #ifdef HAVE_IBV_FLOW_DV_SUPPORT void *actions[MLX5_DV_MAX_NUMBER_OF_ACTIONS ];/**< Action list. */
drivers/net/mlx5/mlx5_flow_dv.c +264 -0
325 lines not on this page · raw message
Signature · 1 line
1.8.3.1
PATCH v3 5/7 net/mlx5: support modify VLAN priority on VLAN hdr
In reply to Moti HaimovskyThis commit adds support for modifying the VLAN priority (PCP) field in about-to-be-pushed VLAN header.
This feature can only modify the PCP field of a new VLAN header yet to be pushed. It does not support modifying an existing or already pushed VLAN headers.
--- doc/guides/nics/mlx5.rst | 5 +++- drivers/net/mlx5/mlx5_flow_dv.c | 58 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 62 insertions(+), 1 deletion(-)
doc/guides/nics/mlx5.rst +4 -1
@@ -128,6 +128,8 @@ Limitations - VLAN push offload is not supported on ingress traffic. +- VLAN set PCP offload is not supported on existing headers. + - A multi segment packet must have not more segments than reported by dev_infos_get() in tx_desc_lim.nb_seg_max field. This value depends on maximal supported Tx descriptor size and ``txq_inline_min`` settings and may be from 2 (worst case forced by maximal
@@ -1038,7 +1040,8 @@ Supported hardware offloads +-----------------------+-----------------+-----------------+ | | VLAN | | DPDK 19.11 | | DPDK 19.11 | | | (of_pop_vlan / | | OFED 4.6-4 | | OFED 4.6-4 | - | | of_push_vlan) | | ConnectX-5 | | ConnectX-5 | + | | of_push_vlan / | | ConnectX-5 | | ConnectX-5 | + | | of_set_vlan_pcp) | | | +-----------------------+-----------------+-----------------+ Notes for testpmd
drivers/net/mlx5/mlx5_flow_dv.c +58 -0
82 lines not on this page · raw message
Signature · 1 line
1.8.3.1
PATCH v3 6/7 net/mlx5: supp modify VLAN ID on new VLAN header
In reply to Moti HaimovskyThis commit adds support for modifying the VLAN ID (VID) field in an about-to-be-pushed VLAN header.
This feature can only modify the VID field of a new VLAN header yet to be pushed. It does not support modifying an existing or already pushed VLAN headers.
--- doc/guides/nics/mlx5.rst | 5 +++- drivers/net/mlx5/mlx5_flow_dv.c | 55 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 59 insertions(+), 1 deletion(-)
doc/guides/nics/mlx5.rst +4 -1
@@ -130,6 +130,8 @@ Limitations - VLAN set PCP offload is not supported on existing headers. +- VLAN set VID offload is not supported on existing headers. + - A multi segment packet must have not more segments than reported by dev_infos_get() in tx_desc_lim.nb_seg_max field. This value depends on maximal supported Tx descriptor size and ``txq_inline_min`` settings and may be from 2 (worst case forced by maximal
@@ -1041,7 +1043,8 @@ Supported hardware offloads | | VLAN | | DPDK 19.11 | | DPDK 19.11 | | | (of_pop_vlan / | | OFED 4.6-4 | | OFED 4.6-4 | | | of_push_vlan / | | ConnectX-5 | | ConnectX-5 | - | | of_set_vlan_pcp) | | | + | | of_set_vlan_pcp / | | | + | | of_set_vlan_vid) | | | +-----------------------+-----------------+-----------------+ Notes for testpmd
drivers/net/mlx5/mlx5_flow_dv.c +55 -0
73 lines not on this page · raw message
Signature · 1 line
1.8.3.1
PATCH v3 7/7 net/mlx5: supp modify VLAN ID on existing VLAN hdr
In reply to Moti HaimovskyThis commit adds support for modifying the VID of the outermost VLAN header already present in the packet.
--- doc/guides/nics/mlx5.rst | 20 ++++----- drivers/net/mlx5/mlx5_flow.h | 3 +- drivers/net/mlx5/mlx5_flow_dv.c | 90 +++++++++++++++++++++++++++++++++++------ drivers/net/mlx5/mlx5_prm.h | 1 + 4 files changed, 92 insertions(+), 22 deletions(-)
doc/guides/nics/mlx5.rst +11 -9
@@ -130,8 +130,6 @@ Limitations - VLAN set PCP offload is not supported on existing headers. -- VLAN set VID offload is not supported on existing headers. - - A multi segment packet must have not more segments than reported by dev_infos_get() in tx_desc_lim.nb_seg_max field. This value depends on maximal supported Tx descriptor size and ``txq_inline_min`` settings and may be from 2 (worst case forced by maximal
@@ -1017,13 +1015,17 @@ Supported hardware offloads | | (set_ipv4_src / | | OFED 4.6-2 | | OFED 4.6-2 | | | set_ipv4_dst / | | rdma-core 24 | | rdma-core 23 | | | set_ipv6_src / | | ConnectX-5 | | ConnectX-5 | - | | set_ipv6_dst / | | | - | | set_tp_src / | | | - | | set_tp_dst / | | | - | | dec_ttl / | | | - | | set_ttl / | | | - | | set_mac_src / | | | - | | set_mac_dst) | | | + | | set_ipv6_dst / | | | | | + | | set_tp_src / | | | | | + | | set_tp_dst / | | | | | + | | dec_ttl / | | | | | + | | set_ttl / | | | | | + | | set_mac_src / | | | | | + | | set_mac_dst) | | | | | + | | | | | | | + | | (of_set_vlan_vid) | | DPDK 19.11 | | DPDK 19.11 | + | | | OFED 4.6-4 | | OFED 4.6-4 | + | | | ConnectX-5 | | ConnectX-5 | +-----------------------+-----------------+-----------------+ | Jump | | DPDK 19.05 | | DPDK 19.02 | | | | OFED 4.6-4 | | OFED 4.6-4 |
drivers/net/mlx5/mlx5_flow.h +2 -1
@@ -171,7 +171,8 @@MLX5_FLOW_ACTION_INC_TCP_SEQ | \MLX5_FLOW_ACTION_DEC_TCP_SEQ | \MLX5_FLOW_ACTION_INC_TCP_ACK | \ - MLX5_FLOW_ACTION_DEC_TCP_ACK) +MLX5_FLOW_ACTION_DEC_TCP_ACK | \ + MLX5_FLOW_ACTION_OF_SET_VLAN_VID) #define MLX5_FLOW_VLAN_ACTIONS (MLX5_FLOW_ACTION_OF_POP_VLAN | \MLX5_FLOW_ACTION_OF_PUSH_VLAN )
drivers/net/mlx5/mlx5_flow_dv.c +78 -12
142 lines not on this page · raw message
drivers/net/mlx5/mlx5_prm.h +1 -0
@@ -413,6 +413,7 @@ enum mlx5_modification_field {MLX5_MODI_OUT_DIPV6_31_0 ,MLX5_MODI_OUT_SIPV4 ,MLX5_MODI_OUT_DIPV4 , +MLX5_MODI_OUT_FIRST_VID ,MLX5_MODI_IN_SMAC_47_16 =0x31 ,MLX5_MODI_IN_SMAC_15_0 , MLX5_MODI_IN_ETHERTYPE,
Signature · 1 line
1.8.3.1
v4 cover net/mlx5: support for flow action on VLAN header
In reply to Moti HaimovskyVLAN actions support is implemented in librte_ethdev, and in test-pmd application, based on [1] Generic flow API. These actions conform to the VLAN actions defined in
[2] the OpenFlow Switch Specification.
rte_flow defines the following VLAN actions:
1. OF_POP_VLAN
Pop the outer-most VLAN header from the packet.
2. OF_PUSH_VLAN
Push a new VLAN header onto the packet.
3. OF_SET_VLAN_VID
Sets the ID of the outermost VLAN tag.
4. OF_SET_VLAN_PCP
Sets the 3-bit priority field of the outermost VLAN tag.
This series of patches adds support for those VLAN actions to the mlx5 PMD using the Direct Verbs interface.
v2:
- Code rebase on latest commits.
v3:
- mlx5 documentation update.
v4:
- Update the release notes with new the new features.
- Minor bug fixes.
Moti Haimovsky (7):
net/mlx5: support for an action search in a list net/mlx5: add VLAN push/pop DR commands to glue net/mlx5: support pop flow action on VLAN header net/mlx5: support push flow action on VLAN header net/mlx5: support modify VLAN priority on VLAN hdr net/mlx5: supp modify VLAN ID on new VLAN header net/mlx5: supp modify VLAN ID on existing VLAN hdr
doc/guides/nics/mlx5.rst | 33 ++- doc/guides/rel_notes/release_19_11.rst | 9 + drivers/net/mlx5/Makefile | 5 + drivers/net/mlx5/meson.build | 2 + drivers/net/mlx5/mlx5.c | 9 + drivers/net/mlx5/mlx5.h | 3 + drivers/net/mlx5/mlx5_flow.c | 23 ++ drivers/net/mlx5/mlx5_flow.h | 27 +- drivers/net/mlx5/mlx5_flow_dv.c | 521 +++++++++++++++++++++++++++++++++ drivers/net/mlx5/mlx5_glue.c | 29 ++ drivers/net/mlx5/mlx5_glue.h | 6 + drivers/net/mlx5/mlx5_prm.h | 1 + 12 files changed, 658 insertions(+), 10 deletions(-)
Signature · 1 line
1.8.3.1
PATCH v4 1/7 net/mlx5: support for an action search in a list
This commit adds a helper routine that supports searching for a specific action in a list of actions.
--- drivers/net/mlx5/mlx5_flow.c | 23 +++++++++++++++++++++++ drivers/net/mlx5/mlx5_flow.h | 3 +++ 2 files changed, 26 insertions(+)
drivers/net/mlx5/mlx5_flow.c +23 -0
@@ -689,6 +689,29 @@ uint32_t mlx5_flow_adjust_priority(struct rte_eth_dev *dev, int32_t priority, }/* +* return a pointer to the desired action in the list of actions. +* +* @param[in] actions +* The list of actions to search the action in. +* @param[in] action +* The action to find. +* +* @return +* Pointer to the action in the list, if found. NULL otherwise. +*/ +const struct rte_flow_action * +mlx5_flow_find_action (const struct rte_flow_action *actions, +enum rte_flow_action_type action) +{ +if (actions ==NULL ) +return NULL ; +for (; actions->type !=RTE_FLOW_ACTION_TYPE_END ; actions++) +if (actions->type == action) +return actions; +return NULL ; +} + +/* * Validate the flag action. * * @param[in] action_flags
drivers/net/mlx5/mlx5_flow.h +3 -0
@@ -442,6 +442,9 @@ uint64_t mlx5_flow_hashfields_adjust(struct mlx5_flow *dev_flow, int tunnel, uint64_t hash_fields);uint32_t mlx5_flow_adjust_priority (struct rte_eth_dev *dev,int32_t priority,uint32_t subpriority); +const struct rte_flow_action *mlx5_flow_find_action + (const struct rte_flow_action *actions, +enum rte_flow_action_type action);int mlx5_flow_validate_action_count (struct rte_eth_dev *dev,const struct rte_flow_attr *attr,struct rte_flow_error *error);
Signature · 1 line
1.8.3.1
PATCH v4 2/7 net/mlx5: add VLAN push/pop DR commands to glue
In reply to Moti HaimovskyThis commit adds the mlx5dv VLAN push and pop commands to mlx5_glue interface.
--- drivers/net/mlx5/Makefile | 5 +++++ drivers/net/mlx5/meson.build | 2 ++ drivers/net/mlx5/mlx5_glue.c | 29 +++++++++++++++++++++++++++++ drivers/net/mlx5/mlx5_glue.h | 6 ++++++ 4 files changed, 42 insertions(+)
drivers/net/mlx5/Makefile +5 -0
@@ -163,6 +163,11 @@ mlx5_autoconf.h.new: $(RTE_SDK)/buildtools/auto-config-h.sh enum MLX5DV_DR_DOMAIN_TYPE_FDB \ $(AUTOCONF_OUTPUT) $Q sh -- '$<' '$@' \ + HAVE_MLX5DV_DR_VLAN \ + infiniband/mlx5dv.h \ + func mlx5dv_dr_action_create_push_vlan \ + $(AUTOCONF_OUTPUT) + $Q sh -- '$<' '$@' \ HAVE_IBV_DEVX_OBJ \ infiniband/mlx5dv.h \ func mlx5dv_devx_obj_create \
drivers/net/mlx5/meson.build +2 -0
@@ -130,6 +130,8 @@ if build 'MLX5DV_DR_DOMAIN_TYPE_NIC_RX' ], [ 'HAVE_MLX5DV_DR_ESWITCH', 'infiniband/mlx5dv.h', 'MLX5DV_DR_DOMAIN_TYPE_FDB' ], + [ 'HAVE_MLX5DV_DR_VLAN', 'infiniband/mlx5dv.h', + 'mlx5dv_dr_action_create_push_vlan' ], [ 'HAVE_SUPPORTED_40000baseKR4_Full', 'linux/ethtool.h', 'SUPPORTED_40000baseKR4_Full' ], [ 'HAVE_SUPPORTED_40000baseCR4_Full', 'linux/ethtool.h',
drivers/net/mlx5/mlx5_glue.c +29 -0
@@ -415,6 +415,31 @@ }static void * +mlx5_glue_dr_create_flow_action_push_vlan (struct mlx5dv_dr_domain *domain, +rte_be32_t vlan_tag) +{ +#ifdef HAVE_MLX5DV_DR_VLAN +return mlx5dv_dr_action_create_push_vlan (domain, vlan_tag); +#else + (void )domain; + (void )vlan_tag; + errno =ENOTSUP ; +return NULL ; +#endif +} + +static void * +mlx5_glue_dr_create_flow_action_pop_vlan (void ) +{ +#ifdef HAVE_MLX5DV_DR_VLAN +return mlx5dv_dr_action_create_pop_vlan (); +#else + errno =ENOTSUP ; +return NULL ; +#endif +} + +static void *mlx5_glue_dr_create_flow_tbl (void *domain,uint32_t level) {#ifdef HAVE_MLX5DV_DR
@@ -1016,6 +1041,10 @@ mlx5_glue_dr_create_flow_action_dest_vport, .dr_create_flow_action_drop = mlx5_glue_dr_create_flow_action_drop, + .dr_create_flow_action_push_vlan = + mlx5_glue_dr_create_flow_action_push_vlan, + .dr_create_flow_action_pop_vlan = + mlx5_glue_dr_create_flow_action_pop_vlan, .dr_create_flow_tbl = mlx5_glue_dr_create_flow_tbl, .dr_destroy_flow_tbl = mlx5_glue_dr_destroy_flow_tbl, .dr_create_domain = mlx5_glue_dr_create_domain,
drivers/net/mlx5/mlx5_glue.h +6 -0
@@ -9,6 +9,8 @@#include <stddef.h> #include <stdint.h> +#include "rte_byteorder.h" +/* Verbs headers do not support -pedantic. */ #ifdef PEDANTIC #pragma GCC diagnostic ignored "-Wpedantic"
@@ -156,6 +158,10 @@ struct mlx5_glue {void *(*dr_create_flow_action_dest_flow_tbl)(void *tbl);void *(*dr_create_flow_action_dest_vport)(void *domain,uint32_t vport);void *(*dr_create_flow_action_drop)(); +void *(*dr_create_flow_action_push_vlan) + (struct mlx5dv_dr_domain *domain, +rte_be32_t vlan_tag); +void *(*dr_create_flow_action_pop_vlan)();void *(*dr_create_flow_tbl)(void *domain,uint32_t level);int (*dr_destroy_flow_tbl)(void *tbl); void *(*dr_create_domain)(struct ibv_context *ctx,
Signature · 1 line
1.8.3.1
PATCH v4 3/7 net/mlx5: support pop flow action on VLAN header
In reply to Moti HaimovskyThis commit adds support for RTE_FLOW_ACTION_TYPE_OF_POP_VLAN via direct verbs flow rules.
--- doc/guides/nics/mlx5.rst | 9 ++++ doc/guides/rel_notes/release_19_11.rst | 6 +++ drivers/net/mlx5/mlx5.c | 9 ++++ drivers/net/mlx5/mlx5.h | 1 + drivers/net/mlx5/mlx5_flow.h | 5 ++- drivers/net/mlx5/mlx5_flow_dv.c | 78 ++++++++++++++++++++++++++++++++++ 6 files changed, 107 insertions(+), 1 deletion(-)
doc/guides/nics/mlx5.rst +9 -0
@@ -124,6 +124,11 @@ Limitations Will match any ipv4 packet (VLAN included). +- VLAN pop offload command: + - Flow rules having a VLAN pop offload command as one of their actions and + are lacking a match on VLAN as one of their items are not supported. + - The command is not supported on egress traffic. + - A multi segment packet must have not more segments than reported by dev_infos_get() in tx_desc_lim.nb_seg_max field. This value depends on maximal supported Tx descriptor size and ``txq_inline_min`` settings and may be from 2 (worst case forced by maximal
@@ -1032,6 +1037,10 @@ Supported hardware offloads | | | rdma-core 24 | | N/A | | | | ConnectX-5 | | N/A | +-----------------------+-----------------+-----------------+ + | | VLAN | | DPDK 19.11 | | DPDK 19.11 | + | | (of_pop_vlan) | | OFED 4.6-4 | | OFED 4.6-4 | + | | | ConnectX-5 | | ConnectX-5 | + +-----------------------+-----------------+-----------------+ Notes for testpmd -----------------
doc/guides/rel_notes/release_19_11.rst +6 -0
@@ -223,3 +223,9 @@ Tested Platforms Also, make sure to start the actual text at the margin. ========================================================= +* **Updated Mellanox mlx5 driver.** + + Updated Mellanox mlx5 driver with new features and improvements, including: + + * Added support for VLAN pop flow offload command. +
drivers/net/mlx5/mlx5.c +9 -0
@@ -549,6 +549,7 @@ struct mlx5_dev_spawn_data { sh->esw_drop_action = mlx5_glue->dr_create_flow_action_drop(); }#endif + sh->pop_vlan_action = mlx5_glue->dr_create_flow_action_pop_vlan (); sh->dv_refcnt++; priv->dr_shared =1 ;return 0 ;
@@ -571,6 +572,10 @@ struct mlx5_dev_spawn_data { mlx5_glue->destroy_flow_action (sh->esw_drop_action); sh->esw_drop_action = NULL; } +if (sh->pop_vlan_action) { + mlx5_glue->destroy_flow_action (sh->pop_vlan_action); + sh->pop_vlan_action =NULL ; + }return err;#else (void )priv;
@@ -616,6 +621,10 @@ struct mlx5_dev_spawn_data { sh->esw_drop_action = NULL; }#endif +if (sh->pop_vlan_action) { + mlx5_glue->destroy_flow_action (sh->pop_vlan_action); + sh->pop_vlan_action =NULL ; + }pthread_mutex_destroy (&sh->dv_mutex);#else (void )priv;
drivers/net/mlx5/mlx5.h +1 -0
@@ -570,6 +570,7 @@ struct mlx5_ibv_shared {void *tx_domain;/* TX Direct Rules name space handle. */ struct mlx5_flow_tbl_resource tx_tbl[MLX5_MAX_TABLES ];void *esw_drop_action;/* Pointer to DR E-Switch drop action. */ +void *pop_vlan_action;/* Pointer to DR pop VLAN action. */ /* TX Direct Rules tables/ */ LIST_HEAD(matchers, mlx5_flow_dv_matcher) matchers; LIST_HEAD(encap_decap, mlx5_flow_dv_encap_decap_resource) encaps_decaps;
drivers/net/mlx5/mlx5_flow.h +4 -1
@@ -154,7 +154,8 @@#define MLX5_FLOW_DECAP_ACTIONS (MLX5_FLOW_ACTION_VXLAN_DECAP | \ MLX5_FLOW_ACTION_NVGRE_DECAP | \ - MLX5_FLOW_ACTION_RAW_DECAP) + MLX5_FLOW_ACTION_RAW_DECAP | \ + MLX5_FLOW_ACTION_OF_POP_VLAN)#define MLX5_FLOW_MODIFY_HDR_ACTIONS (MLX5_FLOW_ACTION_SET_IPV4_SRC | \ MLX5_FLOW_ACTION_SET_IPV4_DST | \
@@ -171,6 +172,8 @@ MLX5_FLOW_ACTION_INC_TCP_ACK | \ MLX5_FLOW_ACTION_DEC_TCP_ACK) +#define MLX5_FLOW_VLAN_ACTIONS (MLX5_FLOW_ACTION_OF_POP_VLAN) +#ifndef IPPROTO_MPLS #define IPPROTO_MPLS 137#endif
drivers/net/mlx5/mlx5_flow_dv.c +78 -0
102 lines not on this page · raw message
Signature · 1 line
1.8.3.1
PATCH v4 4/7 net/mlx5: support push flow action on VLAN header
In reply to Moti HaimovskyThis commit adds support for RTE_FLOW_ACTION_TYPE_OF_PUSH_VLAN using direct verbs flow rules.
If present in the flow, The VLAN default values are taken from the VLAN item configuration.
In this commit only the VLAN TPID value can be set since VLAN modification actions are not supported yet.
--- doc/guides/nics/mlx5.rst | 6 +- doc/guides/rel_notes/release_19_11.rst | 1 + drivers/net/mlx5/mlx5.h | 2 + drivers/net/mlx5/mlx5_flow.h | 18 ++- drivers/net/mlx5/mlx5_flow_dv.c | 264 +++++++++++++++++++++++++++++++++ 5 files changed, 287 insertions(+), 4 deletions(-)
doc/guides/nics/mlx5.rst +4 -2
@@ -129,6 +129,8 @@ Limitations are lacking a match on VLAN as one of their items are not supported. - The command is not supported on egress traffic. +- VLAN push offload is not supported on ingress traffic. + - A multi segment packet must have not more segments than reported by dev_infos_get() in tx_desc_lim.nb_seg_max field. This value depends on maximal supported Tx descriptor size and ``txq_inline_min`` settings and may be from 2 (worst case forced by maximal
@@ -1038,8 +1040,8 @@ Supported hardware offloads | | | ConnectX-5 | | N/A | +-----------------------+-----------------+-----------------+ | | VLAN | | DPDK 19.11 | | DPDK 19.11 | - | | (of_pop_vlan) | | OFED 4.6-4 | | OFED 4.6-4 | - | | | ConnectX-5 | | ConnectX-5 | + | | (of_pop_vlan / | | OFED 4.6-4 | | OFED 4.6-4 | + | | of_push_vlan) | | ConnectX-5 | | ConnectX-5 | +-----------------------+-----------------+-----------------+ Notes for testpmd
doc/guides/rel_notes/release_19_11.rst +1 -0
@@ -228,4 +228,5 @@ Tested Platforms Updated Mellanox mlx5 driver with new features and improvements, including: * Added support for VLAN pop flow offload command. + * Added support for VLAN push flow offload command.
drivers/net/mlx5/mlx5.h +2 -0
@@ -579,6 +579,8 @@ struct mlx5_ibv_shared { LIST_HEAD(jump, mlx5_flow_dv_jump_tbl_resource) jump_tbl; LIST_HEAD(port_id_action_list, mlx5_flow_dv_port_id_action_resource) port_id_action_list;/* List of port ID actions. */ + LIST_HEAD(push_vlan_action_list, mlx5_flow_dv_push_vlan_action_resource) + push_vlan_action_list;/* List of push VLAN actions. */ struct mlx5_flow_counter_mng cmng;/* Counters management structure. */ /* Shared interrupt handler section. */ pthread_mutex_t intr_mutex;/* Interrupt config mutex. */
drivers/net/mlx5/mlx5_flow.h +16 -2
@@ -150,7 +150,8 @@#define MLX5_FLOW_ENCAP_ACTIONS (MLX5_FLOW_ACTION_VXLAN_ENCAP | \ MLX5_FLOW_ACTION_NVGRE_ENCAP | \ - MLX5_FLOW_ACTION_RAW_ENCAP) + MLX5_FLOW_ACTION_RAW_ENCAP | \ + MLX5_FLOW_ACTION_OF_PUSH_VLAN)#define MLX5_FLOW_DECAP_ACTIONS (MLX5_FLOW_ACTION_VXLAN_DECAP | \ MLX5_FLOW_ACTION_NVGRE_DECAP | \
@@ -172,7 +173,8 @@ MLX5_FLOW_ACTION_INC_TCP_ACK | \ MLX5_FLOW_ACTION_DEC_TCP_ACK) -#define MLX5_FLOW_VLAN_ACTIONS (MLX5_FLOW_ACTION_OF_POP_VLAN) +#define MLX5_FLOW_VLAN_ACTIONS (MLX5_FLOW_ACTION_OF_POP_VLAN | \ + MLX5_FLOW_ACTION_OF_PUSH_VLAN)#ifndef IPPROTO_MPLS #define IPPROTO_MPLS 137
@@ -309,6 +311,16 @@ struct mlx5_flow_dv_port_id_action_resource {uint32_t port_id;/**< Port ID value. */ }; +/* Push VLAN action resource structure */ +struct mlx5_flow_dv_push_vlan_action_resource { +LIST_ENTRY (mlx5_flow_dv_push_vlan_action_resource) next; +/* Pointer to next element. */ +rte_atomic32_t refcnt;/**< Reference counter. */ +void *action;/**< Direct verbs action object. */ +uint8_t ft_type;/**< Flow table type, Rx, Tx or FDB. */ +rte_be32_t vlan_tag;/**< VLAN tag value. */ +}; +/* * Max number of actions per DV flow. * See CREATE_FLOW_MAX_FLOW_ACTIONS_SUPPORTED
@@ -335,6 +347,8 @@ struct mlx5_flow_dv {/**< Pointer to port ID action resource. */ struct mlx5_vf_vlan vf_vlan;/**< Structure for VF VLAN workaround. */ +struct mlx5_flow_dv_push_vlan_action_resource *push_vlan_res; +/**< Pointer to push VLAN action resource in cache. */ #ifdef HAVE_IBV_FLOW_DV_SUPPORT void *actions[MLX5_DV_MAX_NUMBER_OF_ACTIONS ];/**< Action list. */
drivers/net/mlx5/mlx5_flow_dv.c +264 -0
325 lines not on this page · raw message
Signature · 1 line
1.8.3.1
PATCH v4 5/7 net/mlx5: support modify VLAN priority on VLAN hdr
In reply to Moti HaimovskyThis commit adds support for modifying the VLAN priority (PCP) field in about-to-be-pushed VLAN header.
This feature can only modify the PCP field of a new VLAN header yet to be pushed. It does not support modifying an existing or already pushed VLAN headers.
---
v4:
- Fixed typo in an error message.
--- doc/guides/nics/mlx5.rst | 5 ++- doc/guides/rel_notes/release_19_11.rst | 1 + drivers/net/mlx5/mlx5_flow_dv.c | 58 ++++++++++++++++++++++++++++++++++ 3 files changed, 63 insertions(+), 1 deletion(-)
doc/guides/nics/mlx5.rst +4 -1
@@ -131,6 +131,8 @@ Limitations - VLAN push offload is not supported on ingress traffic. +- VLAN set PCP offload is not supported on existing headers. + - A multi segment packet must have not more segments than reported by dev_infos_get() in tx_desc_lim.nb_seg_max field. This value depends on maximal supported Tx descriptor size and ``txq_inline_min`` settings and may be from 2 (worst case forced by maximal
@@ -1041,7 +1043,8 @@ Supported hardware offloads +-----------------------+-----------------+-----------------+ | | VLAN | | DPDK 19.11 | | DPDK 19.11 | | | (of_pop_vlan / | | OFED 4.6-4 | | OFED 4.6-4 | - | | of_push_vlan) | | ConnectX-5 | | ConnectX-5 | + | | of_push_vlan / | | ConnectX-5 | | ConnectX-5 | + | | of_set_vlan_pcp) | | | +-----------------------+-----------------+-----------------+ Notes for testpmd
doc/guides/rel_notes/release_19_11.rst +1 -0
@@ -229,4 +229,5 @@ Tested Platforms * Added support for VLAN pop flow offload command. * Added support for VLAN push flow offload command. + * Added support for VLAN set PCP offload command.
drivers/net/mlx5/mlx5_flow_dv.c +58 -0
82 lines not on this page · raw message
Signature · 1 line
1.8.3.1
PATCH v4 6/7 net/mlx5: supp modify VLAN ID on new VLAN header
In reply to Moti HaimovskyThis commit adds support for modifying the VLAN ID (VID) field in an about-to-be-pushed VLAN header.
This feature can only modify the VID field of a new VLAN header yet to be pushed. It does not support modifying an existing or already pushed VLAN headers.
---
v4:
- Fixed typo in an error message.
- Fixed bug in verifying VLAN VID value, used 0xFFFE instead of 0xFFE.
--- doc/guides/nics/mlx5.rst | 5 +++- doc/guides/rel_notes/release_19_11.rst | 1 + drivers/net/mlx5/mlx5_flow_dv.c | 55 ++++++++++++++++++++++++++++++++++ 3 files changed, 60 insertions(+), 1 deletion(-)
doc/guides/nics/mlx5.rst +4 -1
@@ -133,6 +133,8 @@ Limitations - VLAN set PCP offload is not supported on existing headers. +- VLAN set VID offload is not supported on existing headers. + - A multi segment packet must have not more segments than reported by dev_infos_get() in tx_desc_lim.nb_seg_max field. This value depends on maximal supported Tx descriptor size and ``txq_inline_min`` settings and may be from 2 (worst case forced by maximal
@@ -1044,7 +1046,8 @@ Supported hardware offloads | | VLAN | | DPDK 19.11 | | DPDK 19.11 | | | (of_pop_vlan / | | OFED 4.6-4 | | OFED 4.6-4 | | | of_push_vlan / | | ConnectX-5 | | ConnectX-5 | - | | of_set_vlan_pcp) | | | + | | of_set_vlan_pcp / | | | + | | of_set_vlan_vid) | | | +-----------------------+-----------------+-----------------+ Notes for testpmd
doc/guides/rel_notes/release_19_11.rst +1 -0
@@ -230,4 +230,5 @@ Tested Platforms * Added support for VLAN pop flow offload command. * Added support for VLAN push flow offload command. * Added support for VLAN set PCP offload command. + * Added support for VLAN set VID offload command.
drivers/net/mlx5/mlx5_flow_dv.c +55 -0
73 lines not on this page · raw message
Signature · 1 line
1.8.3.1
PATCH v4 7/7 net/mlx5: supp modify VLAN ID on existing VLAN hdr
In reply to Moti HaimovskyThis commit adds support for modifying the VID of the outermost VLAN header already present in the packet.
--- doc/guides/nics/mlx5.rst | 20 ++++----- drivers/net/mlx5/mlx5_flow.h | 3 +- drivers/net/mlx5/mlx5_flow_dv.c | 90 +++++++++++++++++++++++++++++++++++------ drivers/net/mlx5/mlx5_prm.h | 1 + 4 files changed, 92 insertions(+), 22 deletions(-)
doc/guides/nics/mlx5.rst +11 -9
@@ -133,8 +133,6 @@ Limitations - VLAN set PCP offload is not supported on existing headers. -- VLAN set VID offload is not supported on existing headers. - - A multi segment packet must have not more segments than reported by dev_infos_get() in tx_desc_lim.nb_seg_max field. This value depends on maximal supported Tx descriptor size and ``txq_inline_min`` settings and may be from 2 (worst case forced by maximal
@@ -1020,13 +1018,17 @@ Supported hardware offloads | | (set_ipv4_src / | | OFED 4.6-2 | | OFED 4.6-2 | | | set_ipv4_dst / | | rdma-core 24 | | rdma-core 23 | | | set_ipv6_src / | | ConnectX-5 | | ConnectX-5 | - | | set_ipv6_dst / | | | - | | set_tp_src / | | | - | | set_tp_dst / | | | - | | dec_ttl / | | | - | | set_ttl / | | | - | | set_mac_src / | | | - | | set_mac_dst) | | | + | | set_ipv6_dst / | | | | | + | | set_tp_src / | | | | | + | | set_tp_dst / | | | | | + | | dec_ttl / | | | | | + | | set_ttl / | | | | | + | | set_mac_src / | | | | | + | | set_mac_dst) | | | | | + | | | | | | | + | | (of_set_vlan_vid) | | DPDK 19.11 | | DPDK 19.11 | + | | | OFED 4.6-4 | | OFED 4.6-4 | + | | | ConnectX-5 | | ConnectX-5 | +-----------------------+-----------------+-----------------+ | Jump | | DPDK 19.05 | | DPDK 19.02 | | | | OFED 4.6-4 | | OFED 4.6-4 |
drivers/net/mlx5/mlx5_flow.h +2 -1
@@ -171,7 +171,8 @@MLX5_FLOW_ACTION_INC_TCP_SEQ | \MLX5_FLOW_ACTION_DEC_TCP_SEQ | \MLX5_FLOW_ACTION_INC_TCP_ACK | \ - MLX5_FLOW_ACTION_DEC_TCP_ACK) +MLX5_FLOW_ACTION_DEC_TCP_ACK | \ + MLX5_FLOW_ACTION_OF_SET_VLAN_VID) #define MLX5_FLOW_VLAN_ACTIONS (MLX5_FLOW_ACTION_OF_POP_VLAN | \MLX5_FLOW_ACTION_OF_PUSH_VLAN )
drivers/net/mlx5/mlx5_flow_dv.c +78 -12
142 lines not on this page · raw message
drivers/net/mlx5/mlx5_prm.h +1 -0
@@ -413,6 +413,7 @@ enum mlx5_modification_field {MLX5_MODI_OUT_DIPV6_31_0 ,MLX5_MODI_OUT_SIPV4 ,MLX5_MODI_OUT_DIPV4 , +MLX5_MODI_OUT_FIRST_VID ,MLX5_MODI_IN_SMAC_47_16 =0x31 ,MLX5_MODI_IN_SMAC_15_0 , MLX5_MODI_IN_ETHERTYPE,
Signature · 1 line
1.8.3.1
v5 cover net/mlx5: support for flow action on VLAN header
In reply to Moti HaimovskyVLAN actions support is implemented in librte_ethdev, and in test-pmd application, based on [1] Generic flow API. These actions conform to the VLAN actions defined in
[2] the OpenFlow Switch Specification.
rte_flow defines the following VLAN actions:
1. OF_POP_VLAN
Pop the outer-most VLAN header from the packet.
2. OF_PUSH_VLAN
Push a new VLAN header onto the packet.
3. OF_SET_VLAN_VID
Sets the ID of the outermost VLAN tag.
4. OF_SET_VLAN_PCP
Sets the 3-bit priority field of the outermost VLAN tag.
This series of patches adds support for those VLAN actions to the mlx5 PMD using the Direct Verbs interface.
v2:
- Code rebase on latest commits.
v3:
- mlx5 documentation update.
v4:
- Update the release notes with new the new features.
- Minor bug fixes.
v5:
- Rebase on top of latest commits.
- Minor bug fix in vlan push action.
- Bug fix in the format of the release notes.
Moti Haimovsky (7):
net/mlx5: support for an action search in a list net/mlx5: add VLAN push/pop DR commands to glue net/mlx5: support pop flow action on VLAN header net/mlx5: support push flow action on VLAN header net/mlx5: support modify VLAN priority on VLAN hdr net/mlx5: supp modify VLAN ID on new VLAN header net/mlx5: supp modify VLAN ID on existing VLAN hdr
doc/guides/nics/mlx5.rst | 34 ++- doc/guides/rel_notes/release_19_11.rst | 9 + drivers/net/mlx5/Makefile | 5 + drivers/net/mlx5/meson.build | 2 + drivers/net/mlx5/mlx5.c | 9 + drivers/net/mlx5/mlx5.h | 4 + drivers/net/mlx5/mlx5_flow.c | 23 ++ drivers/net/mlx5/mlx5_flow.h | 27 +- drivers/net/mlx5/mlx5_flow_dv.c | 538 +++++++++++++++++++++++++++++++++ drivers/net/mlx5/mlx5_glue.c | 29 ++ drivers/net/mlx5/mlx5_glue.h | 6 + drivers/net/mlx5/mlx5_prm.h | 1 + 12 files changed, 677 insertions(+), 10 deletions(-)
Signature · 1 line
1.8.3.1
PATCH v5 1/7 net/mlx5: support for an action search in a list
This commit adds a helper routine that supports searching for a specific action in a list of actions.
--- drivers/net/mlx5/mlx5_flow.c | 23 +++++++++++++++++++++++ drivers/net/mlx5/mlx5_flow.h | 3 +++ 2 files changed, 26 insertions(+)
drivers/net/mlx5/mlx5_flow.c +23 -0
@@ -697,6 +697,29 @@ uint32_t mlx5_flow_adjust_priority(struct rte_eth_dev *dev, int32_t priority, }/* +* return a pointer to the desired action in the list of actions. +* +* @param[in] actions +* The list of actions to search the action in. +* @param[in] action +* The action to find. +* +* @return +* Pointer to the action in the list, if found. NULL otherwise. +*/ +const struct rte_flow_action * +mlx5_flow_find_action (const struct rte_flow_action *actions, +enum rte_flow_action_type action) +{ +if (actions ==NULL ) +return NULL ; +for (; actions->type !=RTE_FLOW_ACTION_TYPE_END ; actions++) +if (actions->type == action) +return actions; +return NULL ; +} + +/* * Validate the flag action. * * @param[in] action_flags
drivers/net/mlx5/mlx5_flow.h +3 -0
@@ -442,6 +442,9 @@ uint64_t mlx5_flow_hashfields_adjust(struct mlx5_flow *dev_flow, int tunnel, uint64_t hash_fields);uint32_t mlx5_flow_adjust_priority (struct rte_eth_dev *dev,int32_t priority,uint32_t subpriority); +const struct rte_flow_action *mlx5_flow_find_action + (const struct rte_flow_action *actions, +enum rte_flow_action_type action);int mlx5_flow_validate_action_count (struct rte_eth_dev *dev,const struct rte_flow_attr *attr,struct rte_flow_error *error);
Signature · 1 line
1.8.3.1
Re: [dpdk-dev] [PATCH v5 1/7] net/mlx5: support for an action search in a list
Quoted 8 lines
-----Original Message-----
From: Moti Haimovsky <[email protected]>
Sent: Monday, September 9, 2019 18:57
To: Slava Ovsiienko <[email protected]>; Raslan Darawsheh <[email protected]>
Cc: [email protected]
Subject: [PATCH v5 1/7] net/mlx5: support for an action search in a list
Quoted 4 lines
This commit adds a helper routine that supports searching for a specific action in a list of actions.
Signed-off-by Moti Haimovsky <[email protected]>
Quoted 56 lines
--- drivers/net/mlx5/mlx5_flow.c | 23 +++++++++++++++++++++++ drivers/net/mlx5/mlx5_flow.h | 3 +++ 2 files changed, 26 insertions(+)drivers/net/mlx5/mlx5_flow.c +22
-0@@ -697,6 +697,29 @@ uint32_t mlx5_flow_adjust_priority(struct rte_eth_dev *dev, int32_t priority, }/* +* return a pointer to the desired action in the list of actions. +* +* @param[in] actions +* The list of actions to search the action in. +* @param[in] action +* The action to find. +* +* @return +* Pointer to the action in the list, if found. NULL otherwise. +*/ +const struct rte_flow_action * +mlx5_flow_find_action (const struct rte_flow_action *actions, +enum rte_flow_action_type action) { +if (actions ==NULL ) +return NULL ; +for (; actions->type !=RTE_FLOW_ACTION_TYPE_END ; actions++) +if (actions->type == action) +return actions; +return NULL ; +} + +/* * Validate the flag action. * * @param[in] action_flags drivers/net/mlx5/mlx5_flow.h +3
-0@@ -442,6 +442,9 @@ uint64_t mlx5_flow_hashfields_adjust(struct mlx5_flow *dev_flow, int tunnel, uint64_t hash_fields);uint32_t mlx5_flow_adjust_priority (struct rte_eth_dev *dev,int32_t priority,uint32_t subpriority); +const struct rte_flow_action *mlx5_flow_find_action + (const struct rte_flow_action *actions, +enum rte_flow_action_type action); int mlx5_flow_validate_action_count(struct rte_eth_dev *dev,drivers/net/mlx5/mlx5_flow.h +0
-1const struct rte_flow_attr *attr, struct rte_flow_error *error); --1.8.3.1
PATCH v5 2/7 net/mlx5: add VLAN push/pop DR commands to glue
In reply to Moti HaimovskyThis commit adds the mlx5dv VLAN push and pop commands to mlx5_glue interface.
--- drivers/net/mlx5/Makefile | 5 +++++ drivers/net/mlx5/meson.build | 2 ++ drivers/net/mlx5/mlx5_glue.c | 29 +++++++++++++++++++++++++++++ drivers/net/mlx5/mlx5_glue.h | 6 ++++++ 4 files changed, 42 insertions(+)
drivers/net/mlx5/Makefile +5 -0
@@ -164,6 +164,11 @@ mlx5_autoconf.h.new: $(RTE_SDK)/buildtools/auto-config-h.sh enum MLX5DV_DR_DOMAIN_TYPE_FDB \ $(AUTOCONF_OUTPUT) $Q sh -- '$<' '$@' \ + HAVE_MLX5DV_DR_VLAN \ + infiniband/mlx5dv.h \ + func mlx5dv_dr_action_create_push_vlan \ + $(AUTOCONF_OUTPUT) + $Q sh -- '$<' '$@' \ HAVE_IBV_DEVX_OBJ \ infiniband/mlx5dv.h \ func mlx5dv_devx_obj_create \
drivers/net/mlx5/meson.build +2 -0
@@ -132,6 +132,8 @@ if build 'MLX5DV_DR_DOMAIN_TYPE_NIC_RX' ], [ 'HAVE_MLX5DV_DR_ESWITCH', 'infiniband/mlx5dv.h', 'MLX5DV_DR_DOMAIN_TYPE_FDB' ], + [ 'HAVE_MLX5DV_DR_VLAN', 'infiniband/mlx5dv.h', + 'mlx5dv_dr_action_create_push_vlan' ], [ 'HAVE_SUPPORTED_40000baseKR4_Full', 'linux/ethtool.h', 'SUPPORTED_40000baseKR4_Full' ], [ 'HAVE_SUPPORTED_40000baseCR4_Full', 'linux/ethtool.h',
drivers/net/mlx5/mlx5_glue.c +29 -0
@@ -415,6 +415,31 @@ }static void * +mlx5_glue_dr_create_flow_action_push_vlan (struct mlx5dv_dr_domain *domain, +rte_be32_t vlan_tag) +{ +#ifdef HAVE_MLX5DV_DR_VLAN +return mlx5dv_dr_action_create_push_vlan (domain, vlan_tag); +#else + (void )domain; + (void )vlan_tag; + errno =ENOTSUP ; +return NULL ; +#endif +} + +static void * +mlx5_glue_dr_create_flow_action_pop_vlan (void ) +{ +#ifdef HAVE_MLX5DV_DR_VLAN +return mlx5dv_dr_action_create_pop_vlan (); +#else + errno =ENOTSUP ; +return NULL ; +#endif +} + +static void *mlx5_glue_dr_create_flow_tbl (void *domain,uint32_t level) {#ifdef HAVE_MLX5DV_DR
@@ -1016,6 +1041,10 @@ mlx5_glue_dr_create_flow_action_dest_vport, .dr_create_flow_action_drop = mlx5_glue_dr_create_flow_action_drop, + .dr_create_flow_action_push_vlan = + mlx5_glue_dr_create_flow_action_push_vlan, + .dr_create_flow_action_pop_vlan = + mlx5_glue_dr_create_flow_action_pop_vlan, .dr_create_flow_tbl = mlx5_glue_dr_create_flow_tbl, .dr_destroy_flow_tbl = mlx5_glue_dr_destroy_flow_tbl, .dr_create_domain = mlx5_glue_dr_create_domain,
drivers/net/mlx5/mlx5_glue.h +6 -0
@@ -9,6 +9,8 @@#include <stddef.h> #include <stdint.h> +#include "rte_byteorder.h" +/* Verbs headers do not support -pedantic. */ #ifdef PEDANTIC #pragma GCC diagnostic ignored "-Wpedantic"
@@ -156,6 +158,10 @@ struct mlx5_glue {void *(*dr_create_flow_action_dest_flow_tbl)(void *tbl);void *(*dr_create_flow_action_dest_vport)(void *domain,uint32_t vport);void *(*dr_create_flow_action_drop)(); +void *(*dr_create_flow_action_push_vlan) + (struct mlx5dv_dr_domain *domain, +rte_be32_t vlan_tag); +void *(*dr_create_flow_action_pop_vlan)();void *(*dr_create_flow_tbl)(void *domain,uint32_t level);int (*dr_destroy_flow_tbl)(void *tbl); void *(*dr_create_domain)(struct ibv_context *ctx,
Signature · 1 line
1.8.3.1
Re: [dpdk-dev] [PATCH v5 2/7] net/mlx5: add VLAN push/pop DR commands to glue
Quoted 8 lines
-----Original Message-----
From: Moti Haimovsky <[email protected]>
Sent: Monday, September 9, 2019 18:57
To: Slava Ovsiienko <[email protected]>; Raslan Darawsheh <[email protected]>
Cc: [email protected]
Subject: [PATCH v5 2/7] net/mlx5: add VLAN push/pop DR commands to glue
Quoted 4 lines
This commit adds the mlx5dv VLAN push and pop commands to
mlx5_glueinterface.Signed-off-by Moti Haimovsky <[email protected]>
Quoted 108 lines
--- drivers/net/mlx5/Makefile | 5 +++++ drivers/net/mlx5/meson.build | 2 ++ drivers/net/mlx5/mlx5_glue.c | 29 +++++++++++++++++++++++++++++ drivers/net/mlx5/mlx5_glue.h | 6 ++++++ 4 files changed, 42 insertions(+)drivers/net/mlx5/Makefile index renamed from drivers/net/mlx5/Makefile +0
-09f6a7b4..d89a7b5 100644
drivers/net/mlx5/Makefile +0
-0@@ -164,6 +164,11 @@ mlx5_autoconf.h.new:$(RTE_SDK)/buildtools/auto-config-h.sh
drivers/net/mlx5/Makefile +5
-0enum MLX5DV_DR_DOMAIN_TYPE_FDB \ $(AUTOCONF_OUTPUT) $Q sh -- '$<' '$@' \ + HAVE_MLX5DV_DR_VLAN \ + infiniband/mlx5dv.h \ + func mlx5dv_dr_action_create_push_vlan \ + $(AUTOCONF_OUTPUT) + $Q sh -- '$<' '$@' \ HAVE_IBV_DEVX_OBJ \ infiniband/mlx5dv.h \ func mlx5dv_devx_obj_create \drivers/net/mlx5/meson.build +2
-0@@ -132,6 +132,8 @@ if build 'MLX5DV_DR_DOMAIN_TYPE_NIC_RX' ], [ 'HAVE_MLX5DV_DR_ESWITCH', 'infiniband/mlx5dv.h', 'MLX5DV_DR_DOMAIN_TYPE_FDB' ], + [ 'HAVE_MLX5DV_DR_VLAN', 'infiniband/mlx5dv.h', + 'mlx5dv_dr_action_create_push_vlan' ], [ 'HAVE_SUPPORTED_40000baseKR4_Full', 'linux/ethtool.h', 'SUPPORTED_40000baseKR4_Full' ], [ 'HAVE_SUPPORTED_40000baseCR4_Full', 'linux/ethtool.h',drivers/net/mlx5/mlx5_glue.c +24
-0@@ -415,6 +415,31 @@ }static void * +mlx5_glue_dr_create_flow_action_push_vlan (struct mlx5dv_dr_domain *domain, +rte_be32_t vlan_tag) +{ +#ifdef HAVE_MLX5DV_DR_VLAN +return mlx5dv_dr_action_create_push_vlan (domain, vlan_tag);#else + (void )domain; + (void )vlan_tag; + errno =ENOTSUP ; +return NULL ; +#endif +} + +static void * +mlx5_glue_dr_create_flow_action_pop_vlan (void ) +{ +#ifdef HAVE_MLX5DV_DR_VLAN +return mlx5dv_dr_action_create_pop_vlan (); +#else + errno =ENOTSUP ; +return NULL ; +#endif +} + +static void * mlx5_glue_dr_create_flow_tbl(void *domain, uint32_t level) { #ifdef
HAVE_MLX5DV_DR@@ -1016,6 +1041,10 @@drivers/net/mlx5/mlx5_glue.c +4
-0mlx5_glue_dr_create_flow_action_dest_vport, .dr_create_flow_action_drop = mlx5_glue_dr_create_flow_action_drop, + .dr_create_flow_action_push_vlan = + mlx5_glue_dr_create_flow_action_push_vlan, + .dr_create_flow_action_pop_vlan = + mlx5_glue_dr_create_flow_action_pop_vlan, .dr_create_flow_tbl = mlx5_glue_dr_create_flow_tbl, .dr_destroy_flow_tbl = mlx5_glue_dr_destroy_flow_tbl, .dr_create_domain = mlx5_glue_dr_create_domain, diff --git
a/drivers/net/mlx5/mlx5_glue.hb/drivers/net/mlx5/mlx5_glue.hindex 6b5dadf..82d6b10 100644drivers/net/mlx5/mlx5_glue.h +2
-0@@ -9,6 +9,8 @@#include <stddef.h> #include <stdint.h> +#include "rte_byteorder.h" +/* Verbs headers do not support -pedantic. */ #ifdef PEDANTIC #pragma GCC diagnostic ignored "-Wpedantic"
drivers/net/mlx5/mlx5_glue.h +4
-0@@ -156,6 +158,10 @@ struct mlx5_glue {void *(*dr_create_flow_action_dest_flow_tbl)(void *tbl);void *(*dr_create_flow_action_dest_vport)(void *domain,uint32_t vport);void *(*dr_create_flow_action_drop)(); +void *(*dr_create_flow_action_push_vlan) + (struct mlx5dv_dr_domain *domain, +rte_be32_t vlan_tag); +void *(*dr_create_flow_action_pop_vlan)();void *(*dr_create_flow_tbl)(void *domain,uint32_t level);int (*dr_destroy_flow_tbl)(void *tbl);void *(*dr_create_domain)(struct
ibv_context*ctx,
--
1.8.3.1
PATCH v5 3/7 net/mlx5: support pop flow action on VLAN header
In reply to Moti HaimovskyThis commit adds support for RTE_FLOW_ACTION_TYPE_OF_POP_VLAN via direct verbs flow rules.
--- doc/guides/nics/mlx5.rst | 10 +++++ doc/guides/rel_notes/release_19_11.rst | 6 +++ drivers/net/mlx5/mlx5.c | 9 ++++ drivers/net/mlx5/mlx5.h | 2 + drivers/net/mlx5/mlx5_flow.h | 5 ++- drivers/net/mlx5/mlx5_flow_dv.c | 78 ++++++++++++++++++++++++++++++++++ 6 files changed, 109 insertions(+), 1 deletion(-)
doc/guides/nics/mlx5.rst +10 -0
@@ -124,6 +124,12 @@ Limitations Will match any ipv4 packet (VLAN included). +- VLAN pop offload command: + + - Flow rules having a VLAN pop offload command as one of their actions and + are lacking a match on VLAN as one of their items are not supported. + - The command is not supported on egress traffic. + - A multi segment packet must have not more segments than reported by dev_infos_get() in tx_desc_lim.nb_seg_max field. This value depends on maximal supported Tx descriptor size and ``txq_inline_min`` settings and may be from 2 (worst case forced by maximal
@@ -1032,6 +1038,10 @@ Supported hardware offloads | | | rdma-core 24 | | N/A | | | | ConnectX-5 | | N/A | +-----------------------+-----------------+-----------------+ + | | VLAN | | DPDK 19.11 | | DPDK 19.11 | + | | (of_pop_vlan) | | OFED 4.6-4 | | OFED 4.6-4 | + | | | ConnectX-5 | | ConnectX-5 | + +-----------------------+-----------------+-----------------+ Notes for testpmd -----------------
doc/guides/rel_notes/release_19_11.rst +6 -0
@@ -223,3 +223,9 @@ Tested Platforms Also, make sure to start the actual text at the margin. ========================================================= +* **Updated Mellanox mlx5 driver.** + + Updated Mellanox mlx5 driver with new features and improvements, including: + + * Added support for VLAN pop flow offload command. +
drivers/net/mlx5/mlx5.c +9 -0
@@ -549,6 +549,7 @@ struct mlx5_dev_spawn_data { sh->esw_drop_action = mlx5_glue->dr_create_flow_action_drop(); }#endif + sh->pop_vlan_action = mlx5_glue->dr_create_flow_action_pop_vlan (); sh->dv_refcnt++; priv->dr_shared =1 ;return 0 ;
@@ -571,6 +572,10 @@ struct mlx5_dev_spawn_data { mlx5_glue->destroy_flow_action (sh->esw_drop_action); sh->esw_drop_action = NULL; } +if (sh->pop_vlan_action) { + mlx5_glue->destroy_flow_action (sh->pop_vlan_action); + sh->pop_vlan_action =NULL ; + }return err;#else (void )priv;
@@ -616,6 +621,10 @@ struct mlx5_dev_spawn_data { sh->esw_drop_action = NULL; }#endif +if (sh->pop_vlan_action) { + mlx5_glue->destroy_flow_action (sh->pop_vlan_action); + sh->pop_vlan_action =NULL ; + }pthread_mutex_destroy (&sh->dv_mutex);#else (void )priv;
drivers/net/mlx5/mlx5.h +2 -0
@@ -570,6 +570,8 @@ struct mlx5_ibv_shared {struct mlx5_flow_tbl_resource tx_tbl[MLX5_MAX_TABLES ];/* TX Direct Rules tables. */ void *esw_drop_action;/* Pointer to DR E-Switch drop action. */ +void *pop_vlan_action;/* Pointer to DR pop VLAN action. */ +/* TX Direct Rules tables/ */ LIST_HEAD(matchers, mlx5_flow_dv_matcher) matchers; LIST_HEAD(encap_decap, mlx5_flow_dv_encap_decap_resource) encaps_decaps; LIST_HEAD(modify_cmd, mlx5_flow_dv_modify_hdr_resource) modify_cmds;
drivers/net/mlx5/mlx5_flow.h +4 -1
@@ -154,7 +154,8 @@#define MLX5_FLOW_DECAP_ACTIONS (MLX5_FLOW_ACTION_VXLAN_DECAP | \ MLX5_FLOW_ACTION_NVGRE_DECAP | \ - MLX5_FLOW_ACTION_RAW_DECAP) + MLX5_FLOW_ACTION_RAW_DECAP | \ + MLX5_FLOW_ACTION_OF_POP_VLAN)#define MLX5_FLOW_MODIFY_HDR_ACTIONS (MLX5_FLOW_ACTION_SET_IPV4_SRC | \ MLX5_FLOW_ACTION_SET_IPV4_DST | \
@@ -171,6 +172,8 @@ MLX5_FLOW_ACTION_INC_TCP_ACK | \ MLX5_FLOW_ACTION_DEC_TCP_ACK) +#define MLX5_FLOW_VLAN_ACTIONS (MLX5_FLOW_ACTION_OF_POP_VLAN) +#ifndef IPPROTO_MPLS #define IPPROTO_MPLS 137#endif
drivers/net/mlx5/mlx5_flow_dv.c +78 -0
102 lines not on this page · raw message
Signature · 1 line
1.8.3.1
Re: [dpdk-dev] [PATCH v5 3/7] net/mlx5: support pop flow action on VLAN header
Quoted 8 lines
-----Original Message-----
From: Moti Haimovsky <[email protected]>
Sent: Monday, September 9, 2019 18:57
To: Slava Ovsiienko <[email protected]>; Raslan Darawsheh <[email protected]>
Cc: [email protected]
Subject: [PATCH v5 3/7] net/mlx5: support pop flow action on VLAN header
Quoted 4 lines
This commit adds support for
RTE_FLOW_ACTION_TYPE_OF_POP_VLANvia direct verbs flow rules.Signed-off-by Moti Haimovsky <[email protected]>
Quoted 250 lines
--- doc/guides/nics/mlx5.rst | 10 +++++ doc/guides/rel_notes/release_19_11.rst | 6 +++ drivers/net/mlx5/mlx5.c | 9 ++++ drivers/net/mlx5/mlx5.h | 2 + drivers/net/mlx5/mlx5_flow.h | 5 ++- drivers/net/mlx5/mlx5_flow_dv.c | 78 ++++++++++++++++++++++++++++++++++ 6 files changed, 109 insertions(+), 1 deletion(-)doc/guides/nics/mlx5.rst index renamed from doc/guides/nics/mlx5.rst +0
-04115520..2ae2e8f 100644
doc/guides/nics/mlx5.rst +3
-0@@ -124,6 +124,12 @@ Limitations Will match any ipv4 packet (VLAN included). +- VLAN pop offload command: + + - Flow rules having a VLAN pop offload command as one of their actionsand
doc/guides/nics/mlx5.rst +3
-0+ are lacking a match on VLAN as one of their items are not supported. + - The command is not supported on egress traffic. + - A multi segment packet must have not more segments than reported by
dev_infos_get()
in tx_desc_lim.nb_seg_max field. This value depends on maximal supported
Tx descriptor
size and ``txq_inline_min`` settings and may be from 2 (worst case forced
by maximal @@ -1032,6 +1038,10 @@ Supported hardware offloads| | | rdma-core 24 | | N/A | | | | ConnectX-5 | | N/A | +-----------------------+-----------------+-----------------+doc/guides/nics/mlx5.rst +4
-0+ | | VLAN | | DPDK 19.11 | | DPDK 19.11 | + | | (of_pop_vlan) | | OFED 4.6-4 | | OFED 4.6-4 | + | | | ConnectX-5 | | ConnectX-5 | + +-----------------------+-----------------+-----------------+ Notes for testpmd -----------------doc/guides/rel_notes/release_19_11.rst +3
-0@@ -223,3 +223,9 @@ Tested Platforms Also, make sure to start the actual text at the margin. ========================================================= +* **Updated Mellanox mlx5 driver.** + + Updated Mellanox mlx5 driver with new features and improvements,including:
doc/guides/rel_notes/release_19_11.rst +3
-0+ + * Added support for VLAN pop flow offload command. +drivers/net/mlx5/mlx5.c index renamed from drivers/net/mlx5/mlx5.c +0
-0dc7b10b..8e10932 100644
drivers/net/mlx5/mlx5.c +1
-0@@ -549,6 +549,7 @@ struct mlx5_dev_spawn_data { sh->esw_drop_action = mlx5_glue- >dr_create_flow_action_drop(); }#endif + sh->pop_vlan_action = mlx5_glue- >dr_create_flow_action_pop_vlan(); sh->dv_refcnt++;drivers/net/mlx5/mlx5.c +8
-0priv->dr_shared =1 ;return 0 ;@@ -571,6 +572,10 @@ struct mlx5_dev_spawn_data { mlx5_glue->destroy_flow_action (sh->esw_drop_action); sh->esw_drop_action = NULL; } +if (sh->pop_vlan_action) { + mlx5_glue->destroy_flow_action (sh->pop_vlan_action); + sh->pop_vlan_action =NULL ; + }return err;#else (void )priv;@@ -616,6 +621,10 @@ struct mlx5_dev_spawn_data { sh->esw_drop_action = NULL; }#endif +if (sh->pop_vlan_action) { + mlx5_glue->destroy_flow_action (sh->pop_vlan_action); + sh->pop_vlan_action =NULL ; + }pthread_mutex_destroy (&sh->dv_mutex);#else (void )priv;drivers/net/mlx5/mlx5.h index renamed from drivers/net/mlx5/mlx5.h +0
-009ca4b1..a18f588 100644
drivers/net/mlx5/mlx5.h +2
-0@@ -570,6 +570,8 @@ struct mlx5_ibv_shared {struct mlx5_flow_tbl_resource tx_tbl[MLX5_MAX_TABLES ];/* TX Direct Rules tables. */ void *esw_drop_action;/* Pointer to DR E-Switch drop action. */ +void *pop_vlan_action;/* Pointer to DR pop VLAN action. */ +/* TX Direct Rules tables/ */ LIST_HEAD(matchers, mlx5_flow_dv_matcher) matchers; LIST_HEAD(encap_decap, mlx5_flow_dv_encap_decap_resource) encaps_decaps;
LIST_HEAD(modify_cmd, mlx5_flow_dv_modify_hdr_resource)modify_cmds; diff --gita/drivers/net/mlx5/mlx5_flow.hb/drivers/net/mlx5/mlx5_flow.hindex 8d193b6..06b0470 100644drivers/net/mlx5/mlx5_flow.h +2
-1@@ -154,7 +154,8 @@#define MLX5_FLOW_DECAP_ACTIONS (MLX5_FLOW_ACTION_VXLAN_DECAP | \MLX5_FLOW_ACTION_NVGRE_DECAP | \ - MLX5_FLOW_ACTION_RAW_DECAP) +MLX5_FLOW_ACTION_RAW_DECAP | \ + MLX5_FLOW_ACTION_OF_POP_VLAN)#define MLX5_FLOW_MODIFY_HDR_ACTIONS (
MLX5_FLOW_ACTION_SET_IPV4_SRC| \drivers/net/mlx5/mlx5_flow.h +2
-0MLX5_FLOW_ACTION_SET_IPV4_DST | \@@ -171,6 +172,8 @@ MLX5_FLOW_ACTION_INC_TCP_ACK | \ MLX5_FLOW_ACTION_DEC_TCP_ACK) +#define MLX5_FLOW_VLAN_ACTIONS (MLX5_FLOW_ACTION_OF_POP_VLAN) +#ifndef IPPROTO_MPLS #define IPPROTO_MPLS 137#endif
(quoted diff) +0
-0
b/drivers/net/mlx5/mlx5_flow_dv.cindex 7b2ba07..fd2e810 100644drivers/net/mlx5/mlx5_flow_dv.c +55
-0@@ -815,6 +815,61 @@ struct field_modify_info modify_tcp[] = { }/** +* Validate the pop VLAN action. +* +* @param[in] action_flags +* Holds the actions detected until now. +* @param[in] action +* Pointer to the pop vlan action. +* @param[in] item_flags +* The items found in this flow rule. +* @param[in] attr +* Pointer to flow attributes. +* @param[out] error +* Pointer to error structure. +* +* @return +* 0 on success, a negative errno value otherwise and rte_errno is set. +*/ +static int +flow_dv_validate_action_pop_vlan (struct rte_eth_dev *dev, +uint64_t action_flags, +const struct rte_flow_action *action, +uint64_t item_flags, +const struct rte_flow_attr *attr, +struct rte_flow_error *error) +{ +struct mlx5_priv *priv = dev->data->dev_private; + + (void )action; + (void )attr; +if (!priv->sh->pop_vlan_action) +return rte_flow_error_set (error,ENOTSUP , +RTE_FLOW_ERROR_TYPE_UNSPECIFIED , +NULL , +"pop vlan action is not supported" ); +/* +* Check for inconsistencies: +* fail strip_vlan in a flow that matches packets without VLAN tags. +* fail strip_vlan in a flow that matches packets without explicitly a +* matching on VLAN tag ? +*/ +if (action_flags &MLX5_FLOW_ACTION_OF_POP_VLAN ) +return rte_flow_error_set (error,ENOTSUP , +RTE_FLOW_ERROR_TYPE_UNSPECIFIED , +NULL , +"no support for multiple vlan pop " +"actions" ); +if (!(item_flags &MLX5_FLOW_LAYER_OUTER_VLAN )) +return rte_flow_error_set (error,ENOTSUP , +RTE_FLOW_ERROR_TYPE_UNSPECIFIED , +NULL , +"cannot pop vlan without a " +"match on (outer) vlan in the flow" ); +return 0 ; +} + +/** * Validate count action. *
* @param[in] devdrivers/net/mlx5/mlx5_flow_dv.c +10
-0@@ -3109,6 +3164,16 @@ struct field_modify_info modify_tcp[] = { action_flags |=MLX5_FLOW_ACTION_COUNT ; ++actions_n;break ; +case RTE_FLOW_ACTION_TYPE_OF_POP_VLAN : +if (flow_dv_validate_action_pop_vlan (dev, + action_flags, + actions, + item_flags, attr, + error)) +return -rte_errno; + action_flags |=MLX5_FLOW_ACTION_OF_POP_VLAN ; + ++actions_n; +break ;case RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP :case RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP :ret =
flow_dv_validate_action_l2_encap(action_flags,drivers/net/mlx5/mlx5_flow_dv.c +13
-0@@ -3283,6 +3348,13 @@ struct field_modify_info modify_tcp[] = { "action not supported"); } } +if ((action_flags &MLX5_FLOW_LAYER_TUNNEL ) && + (action_flags &MLX5_FLOW_VLAN_ACTIONS )) +return rte_flow_error_set (error,ENOTSUP , +RTE_FLOW_ERROR_TYPE_ACTION , + actions, +"can't have vxlan and vlan" +" actions in the same rule" );/* Eswitch has few restrictions on using items and actions */ if (attr->transfer) { if (action_flags & MLX5_FLOW_ACTION_FLAG) @@ -4801,6 +4873,12 @@ struct field_modify_info modify_tcp[] = { action, "cannot create counter" " object."); +break ; +case RTE_FLOW_ACTION_TYPE_OF_POP_VLAN : + dev_flow->dv.actions[actions_n++] = + priv->sh->pop_vlan_action; + action_flags |=
MLX5_FLOW_ACTION_OF_POP_VLAN;drivers/net/mlx5/mlx5_flow_dv.c +1
-1+break ;case RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP :case RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP : if (flow_dv_create_action_l2_encap(dev, actions, --1.8.3.1
PATCH v5 4/7 net/mlx5: support push flow action on VLAN header
In reply to Moti HaimovskyThis commit adds support for RTE_FLOW_ACTION_TYPE_OF_PUSH_VLAN using direct verbs flow rules.
If present in the flow, The VLAN default values are taken from the VLAN item configuration.
In this commit only the VLAN TPID value can be set since VLAN modification actions are not supported yet.
---
v5:
- Fixed bug in retrieving VLAN VID and PCP from the existing VLAN flow item.
---
doc/guides/nics/mlx5.rst | 6 +- doc/guides/rel_notes/release_19_11.rst | 1 + drivers/net/mlx5/mlx5.h | 2 + drivers/net/mlx5/mlx5_flow.h | 18 ++- drivers/net/mlx5/mlx5_flow_dv.c | 272 +++++++++++++++++++++++++++++++++ 5 files changed, 295 insertions(+), 4 deletions(-)
doc/guides/nics/mlx5.rst +4 -2
@@ -130,6 +130,8 @@ Limitations are lacking a match on VLAN as one of their items are not supported. - The command is not supported on egress traffic. +- VLAN push offload is not supported on ingress traffic. + - A multi segment packet must have not more segments than reported by dev_infos_get() in tx_desc_lim.nb_seg_max field. This value depends on maximal supported Tx descriptor size and ``txq_inline_min`` settings and may be from 2 (worst case forced by maximal
@@ -1039,8 +1041,8 @@ Supported hardware offloads | | | ConnectX-5 | | N/A | +-----------------------+-----------------+-----------------+ | | VLAN | | DPDK 19.11 | | DPDK 19.11 | - | | (of_pop_vlan) | | OFED 4.6-4 | | OFED 4.6-4 | - | | | ConnectX-5 | | ConnectX-5 | + | | (of_pop_vlan / | | OFED 4.6-4 | | OFED 4.6-4 | + | | of_push_vlan) | | ConnectX-5 | | ConnectX-5 | +-----------------------+-----------------+-----------------+ Notes for testpmd
doc/guides/rel_notes/release_19_11.rst +1 -0
@@ -228,4 +228,5 @@ Tested Platforms Updated Mellanox mlx5 driver with new features and improvements, including: * Added support for VLAN pop flow offload command. + * Added support for VLAN push flow offload command.
drivers/net/mlx5/mlx5.h +2 -0
@@ -579,6 +579,8 @@ struct mlx5_ibv_shared { LIST_HEAD(jump, mlx5_flow_dv_jump_tbl_resource) jump_tbl; LIST_HEAD(port_id_action_list, mlx5_flow_dv_port_id_action_resource) port_id_action_list;/* List of port ID actions. */ + LIST_HEAD(push_vlan_action_list, mlx5_flow_dv_push_vlan_action_resource) + push_vlan_action_list;/* List of push VLAN actions. */ struct mlx5_flow_counter_mng cmng;/* Counters management structure. */ /* Shared interrupt handler section. */ pthread_mutex_t intr_mutex;/* Interrupt config mutex. */
drivers/net/mlx5/mlx5_flow.h +16 -2
@@ -150,7 +150,8 @@#define MLX5_FLOW_ENCAP_ACTIONS (MLX5_FLOW_ACTION_VXLAN_ENCAP | \ MLX5_FLOW_ACTION_NVGRE_ENCAP | \ - MLX5_FLOW_ACTION_RAW_ENCAP) + MLX5_FLOW_ACTION_RAW_ENCAP | \ + MLX5_FLOW_ACTION_OF_PUSH_VLAN)#define MLX5_FLOW_DECAP_ACTIONS (MLX5_FLOW_ACTION_VXLAN_DECAP | \ MLX5_FLOW_ACTION_NVGRE_DECAP | \
@@ -172,7 +173,8 @@ MLX5_FLOW_ACTION_INC_TCP_ACK | \ MLX5_FLOW_ACTION_DEC_TCP_ACK) -#define MLX5_FLOW_VLAN_ACTIONS (MLX5_FLOW_ACTION_OF_POP_VLAN) +#define MLX5_FLOW_VLAN_ACTIONS (MLX5_FLOW_ACTION_OF_POP_VLAN | \ + MLX5_FLOW_ACTION_OF_PUSH_VLAN)#ifndef IPPROTO_MPLS #define IPPROTO_MPLS 137
@@ -309,6 +311,16 @@ struct mlx5_flow_dv_port_id_action_resource {uint32_t port_id;/**< Port ID value. */ }; +/* Push VLAN action resource structure */ +struct mlx5_flow_dv_push_vlan_action_resource { +LIST_ENTRY (mlx5_flow_dv_push_vlan_action_resource) next; +/* Pointer to next element. */ +rte_atomic32_t refcnt;/**< Reference counter. */ +void *action;/**< Direct verbs action object. */ +uint8_t ft_type;/**< Flow table type, Rx, Tx or FDB. */ +rte_be32_t vlan_tag;/**< VLAN tag value. */ +}; +/* * Max number of actions per DV flow. * See CREATE_FLOW_MAX_FLOW_ACTIONS_SUPPORTED
@@ -335,6 +347,8 @@ struct mlx5_flow_dv {/**< Pointer to port ID action resource. */ struct mlx5_vf_vlan vf_vlan;/**< Structure for VF VLAN workaround. */ +struct mlx5_flow_dv_push_vlan_action_resource *push_vlan_res; +/**< Pointer to push VLAN action resource in cache. */ #ifdef HAVE_IBV_FLOW_DV_SUPPORT void *actions[MLX5_DV_MAX_NUMBER_OF_ACTIONS ];/**< Action list. */
drivers/net/mlx5/mlx5_flow_dv.c +272 -0
332 lines not on this page · raw message
Signature · 1 line
1.8.3.1
Re: [dpdk-dev] [PATCH v5 4/7] net/mlx5: support push flow action on VLAN header
Quoted 8 lines
-----Original Message-----
From: Moti Haimovsky <[email protected]>
Sent: Monday, September 9, 2019 18:57
To: Slava Ovsiienko <[email protected]>; Raslan Darawsheh <[email protected]>
Cc: [email protected]
Subject: [PATCH v5 4/7] net/mlx5: support push flow action on VLAN header
Quoted 8 lines
This commit adds support for
RTE_FLOW_ACTION_TYPE_OF_PUSH_VLANusing direct verbs flow rules.
If present in the flow, The VLAN default values are taken from the VLAN item configuration.
In this commit only the VLAN TPID value can be set since VLAN modification actions are not supported yet.Signed-off-by Moti Haimovsky <[email protected]>
Quoted 495 lines
---
v5:
- Fixed bug in retrieving VLAN VID and PCP from the existing VLAN flow item.
---doc/guides/nics/mlx5.rst | 6 +- doc/guides/rel_notes/release_19_11.rst | 1 + drivers/net/mlx5/mlx5.h | 2 + drivers/net/mlx5/mlx5_flow.h | 18 ++- drivers/net/mlx5/mlx5_flow_dv.c | 272 +++++++++++++++++++++++++++++++++ 5 files changed, 295 insertions(+), 4 deletions(-)doc/guides/nics/mlx5.rst index renamed from doc/guides/nics/mlx5.rst +0
-02ae2e8f..875a87f 100644
doc/guides/nics/mlx5.rst +2
-0@@ -130,6 +130,8 @@ Limitations are lacking a match on VLAN as one of their items are not supported. - The command is not supported on egress traffic. +- VLAN push offload is not supported on ingress traffic. + - A multi segment packet must have not more segments than reported by dev_infos_get() in tx_desc_lim.nb_seg_max field. This value depends on maximal supportedTx descriptor
size and ``txq_inline_min`` settings and may be from 2 (worst case forced
by maximal @@ -1039,8 +1041,8 @@ Supported hardware offloads| | | ConnectX-5 | | N/A | +-----------------------+-----------------+-----------------+ | | VLAN | | DPDK 19.11 | | DPDK 19.11 |doc/guides/nics/mlx5.rst +2
-2- | | (of_pop_vlan) | | OFED 4.6-4 | | OFED 4.6-4 | - | | | ConnectX-5 | | ConnectX-5 | + | | (of_pop_vlan / | | OFED 4.6-4 | | OFED 4.6-4 | + | | of_push_vlan) | | ConnectX-5 | | ConnectX-5 | +-----------------------+-----------------+-----------------+ Notes for testpmddoc/guides/rel_notes/release_19_11.rst +0
-0@@ -228,4 +228,5 @@ Tested Platforms Updated Mellanox mlx5 driver with new features and improvements,including:
* Added support for VLAN pop flow offload command.
doc/guides/rel_notes/release_19_11.rst +1
-0+ * Added support for VLAN push flow offload command.drivers/net/mlx5/mlx5.h index renamed from drivers/net/mlx5/mlx5.h +0
-0a18f588..dbdc3ce 100644
drivers/net/mlx5/mlx5.h +2
-0@@ -579,6 +579,8 @@ struct mlx5_ibv_shared { LIST_HEAD(jump, mlx5_flow_dv_jump_tbl_resource) jump_tbl;LIST_HEAD (port_id_action_list, mlx5_flow_dv_port_id_action_resource) port_id_action_list;/* List of port ID actions. */ +LIST_HEAD (push_vlan_action_list, mlx5_flow_dv_push_vlan_action_resource) + push_vlan_action_list;/* List of push VLAN actions. */ struct mlx5_flow_counter_mng cmng;/* Counters management structure. */
drivers/net/mlx5/mlx5.h +0
-0/* Shared interrupt handler section. */ pthread_mutex_t intr_mutex; /* Interrupt config mutex. */ diff --git
a/drivers/net/mlx5/mlx5_flow.hb/drivers/net/mlx5/mlx5_flow.hindex 06b0470..15c9c04 100644drivers/net/mlx5/mlx5_flow.h +2
-1@@ -150,7 +150,8 @@#define MLX5_FLOW_ENCAP_ACTIONS (MLX5_FLOW_ACTION_VXLAN_ENCAP | \MLX5_FLOW_ACTION_NVGRE_ENCAP | \ - MLX5_FLOW_ACTION_RAW_ENCAP) +MLX5_FLOW_ACTION_RAW_ENCAP | \ + MLX5_FLOW_ACTION_OF_PUSH_VLAN)#define MLX5_FLOW_DECAP_ACTIONS (MLX5_FLOW_ACTION_VXLAN_DECAP | \drivers/net/mlx5/mlx5_flow.h +2
-1MLX5_FLOW_ACTION_NVGRE_DECAP | \@@ -172,7 +173,8 @@MLX5_FLOW_ACTION_INC_TCP_ACK | \ MLX5_FLOW_ACTION_DEC_TCP_ACK) -#define MLX5_FLOW_VLAN_ACTIONS (MLX5_FLOW_ACTION_OF_POP_VLAN) +#define MLX5_FLOW_VLAN_ACTIONS (MLX5_FLOW_ACTION_OF_POP_VLAN | \ +MLX5_FLOW_ACTION_OF_PUSH_VLAN )#ifndef
IPPROTO_MPLS
#defineIPPROTO_MPLS137drivers/net/mlx5/mlx5_flow.h +11
-0@@ -309,6 +311,16 @@ struct mlx5_flow_dv_port_id_action_resource {uint32_t port_id;/**< Port ID value. */ }; +/* Push VLAN action resource structure */ struct +mlx5_flow_dv_push_vlan_action_resource { +LIST_ENTRY (mlx5_flow_dv_push_vlan_action_resource) next; +/* Pointer to next element. */ +rte_atomic32_t refcnt;/**< Reference counter. */ +void *action;/**< Direct verbs action object. */ +uint8_t ft_type;/**< Flow table type, Rx, Tx or FDB. */ +rte_be32_t vlan_tag;/**< VLAN tag value. */ }; +/* * Max number of actions per DV flow. * See CREATE_FLOW_MAX_FLOW_ACTIONS_SUPPORTED @@ -335,6 +347,8 @@ struct mlx5_flow_dv {/**< Pointer to port ID action resource. */ struct mlx5_vf_vlan vf_vlan;/**< Structure for VF VLAN workaround. */ +struct mlx5_flow_dv_push_vlan_action_resource *push_vlan_res; +/**< Pointer to push VLAN action resource in cache. */ #ifdef HAVE_IBV_FLOW_DV_SUPPORT void *actions[MLX5_DV_MAX_NUMBER_OF_ACTIONS ];/**< Action list. */ (quoted diff) +0
-0
b/drivers/net/mlx5/mlx5_flow_dv.cindex fd2e810..2780735 100644drivers/net/mlx5/mlx5_flow_dv.c +62
-0@@ -50,6 +50,13 @@#define MLX5DV_DR_ACTION_FLAGS_ROOT_LEVEL 1 #endif +/* VLAN header definitions */ +#define MLX5DV_FLOW_VLAN_PCP_SHIFT 13 +#define MLX5DV_FLOW_VLAN_PCP_MASK (0x7 << MLX5DV_FLOW_VLAN_PCP_SHIFT) +#define MLX5DV_FLOW_VLAN_VID_MASK 0x0fff #define +MLX5DV_FLOW_VLAN_PCP_MASK_BE RTE_BE16(MLX5DV_FLOW_VLAN_PCP_MASK) +#define MLX5DV_FLOW_VLAN_VID_MASK_BE +RTE_BE16(MLX5DV_FLOW_VLAN_VID_MASK) + union flow_dv_attr { struct { uint32_t valid:1;@@ -817,6 +824,8 @@ struct field_modify_info modify_tcp[] = {/** * Validate the pop VLAN action. * +* @param[in] dev +* Pointer to the rte_eth_dev structure. * @param[in] action_flags * Holds the actions detected until now. * @param[in] action @@ -870,6 +879,101 @@ struct field_modify_info modify_tcp[] = { }/** +* Get VLAN default info from vlan match info. +* +* @param[in] dev +* Pointer to the rte_eth_dev structure. +* @param[in] item +* the list of item specifications. +* @param[out] vlan +* pointer VLAN info to fill to. +* @param[out] error +* Pointer to error structure. +* +* @return +* 0 on success, a negative errno value otherwise and rte_errno is set. +*/ +static void +flow_dev_get_vlan_info_from_items (const struct rte_flow_item *items, +struct rte_vlan_hdr *vlan) +{ +const struct rte_flow_item_vlan nic_mask = { + .tci =RTE_BE16 (MLX5DV_FLOW_VLAN_PCP_MASK | +MLX5DV_FLOW_VLAN_VID_MASK ), + .inner_type =RTE_BE16 (0xffff ), + }; + +if (items ==NULL ) +return ; +for (; items->type !=RTE_FLOW_ITEM_TYPE_END && + items->type !=RTE_FLOW_ITEM_TYPE_VLAN ; items++) + ; +if (items->type ==RTE_FLOW_ITEM_TYPE_VLAN ) { +const struct rte_flow_item_vlan *vlan_m = items->mask; +const struct rte_flow_item_vlan *vlan_v = items->spec; + +if (!vlan_m) + vlan_m = &nic_mask; +/* Only full match values are accepted */ +if ((vlan_m->tci &MLX5DV_FLOW_VLAN_PCP_MASK_BE ) == +MLX5DV_FLOW_VLAN_PCP_MASK_BE ) { + vlan->vlan_tci &=MLX5DV_FLOW_VLAN_PCP_MASK ; + vlan->vlan_tci |= +rte_be_to_cpu_16 (vlan_v->tci & +MLX5DV_FLOW_VLAN_PCP_MASK_BE ); + } +if ((vlan_m->tci &MLX5DV_FLOW_VLAN_VID_MASK_BE ) == +MLX5DV_FLOW_VLAN_VID_MASK_BE ) { + vlan->vlan_tci &= ~MLX5DV_FLOW_VLAN_VID_MASK ; + vlan->vlan_tci |= +rte_be_to_cpu_16 (vlan_v->tci & +MLX5DV_FLOW_VLAN_VID_MASK_BE ); + } +if (vlan_m->inner_type == nic_mask.inner_type) + vlan->eth_proto = rte_be_to_cpu_16(vlan_v-Quoted 1 line
inner_type&drivers/net/mlx5/mlx5_flow_dv.c +1
-0+ vlan_m-Quoted 1 line
inner_type);drivers/net/mlx5/mlx5_flow_dv.c +25
-0+ } +} + +/** +* Validate the push VLAN action. +* +* @param[in] action_flags +* Holds the actions detected until now. +* @param[in] action +* Pointer to the encap action. +* @param[in] attr +* Pointer to flow attributes +* @param[out] error +* Pointer to error structure. +* +* @return +* 0 on success, a negative errno value otherwise and rte_errno is set. +*/ +static int +flow_dv_validate_action_push_vlan (uint64_t action_flags, +const struct rte_flow_action *action, +const struct rte_flow_attr *attr, +struct rte_flow_error *error) +{ + const struct rte_flow_action_of_push_vlan *push_vlan = action-Quoted 1 line
conf;
drivers/net/mlx5/mlx5_flow_dv.c +5
-0+ +if (push_vlan->ethertype !=RTE_BE16 (RTE_ETHER_TYPE_VLAN ) && + push_vlan->ethertype !=RTE_BE16 (RTE_ETHER_TYPE_QINQ )) + return rte_flow_error_set(error, EINVAL, + RTE_FLOW_ERROR_TYPE_ACTION,action,
drivers/net/mlx5/mlx5_flow_dv.c +3
-0+ "invalid vlan ethertype"); + if (action_flags & + (MLX5_FLOW_ACTION_OF_POP_VLAN |
MLX5_FLOW_ACTION_OF_PUSH_VLAN))drivers/net/mlx5/mlx5_flow_dv.c +2
-0+ return rte_flow_error_set(error, ENOTSUP, + RTE_FLOW_ERROR_TYPE_ACTION,action,
drivers/net/mlx5/mlx5_flow_dv.c +38
-0+"no support for multiple VLAN " + "actions"); + (void )attr; +return 0 ; +} + +/** * Validate count action. * * @param[in] dev @@ -1300,6 +1404,77 @@ struct field_modify_info modify_tcp[] = { }/** +* Find existing push vlan resource or create and register a new one. +* +* @param dev[in, out] +* Pointer to rte_eth_dev structure. +* @param[in, out] resource +* Pointer to port ID action resource. +* @parm[in, out] dev_flow +* Pointer to the dev_flow. +* @param[out] error +* pointer to error structure. +* +* @return +* 0 on success otherwise -errno and errno is set. +*/ +static int +flow_dv_push_vlan_action_resource_register + (struct rte_eth_dev *dev, +struct mlx5_flow_dv_push_vlan_action_resource *resource, +struct mlx5_flow *dev_flow, +struct rte_flow_error *error) +{ +struct mlx5_priv *priv = dev->data->dev_private; +struct mlx5_ibv_shared *sh = priv->sh; +struct mlx5_flow_dv_push_vlan_action_resource *cache_resource; +struct mlx5dv_dr_domain *domain; + +/* Lookup a matching resource from cache. */ + LIST_FOREACH(cache_resource, &sh->push_vlan_action_list, next) { +if (resource->vlan_tag == cache_resource->vlan_tag && + resource->ft_type == cache_resource->ft_type) { + DRV_LOG(DEBUG, "push-VLAN action resourceresource %p: "
drivers/net/mlx5/mlx5_flow_dv.c +3
-0+"refcnt %d++" , + (void *)cache_resource, + rte_atomic32_read(&cache_resource-Quoted 1 line
refcnt));
drivers/net/mlx5/mlx5_flow_dv.c +7
-0+rte_atomic32_inc (&cache_resource->refcnt); + dev_flow->dv.push_vlan_res = cache_resource; +return 0 ; + } + } +/* Register new push_vlan action resource. */ + cache_resource = rte_calloc(__func__, 1, sizeof(*cache_resource),0);
drivers/net/mlx5/mlx5_flow_dv.c +3
-0+if (!cache_resource) + return rte_flow_error_set(error, ENOMEM, +
RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,drivers/net/mlx5/mlx5_flow_dv.c +1
-0+ "cannot allocate resourcememory");
drivers/net/mlx5/mlx5_flow_dv.c +10
-0+ *cache_resource = *resource; +if (resource->ft_type ==MLX5DV_FLOW_TABLE_TYPE_FDB ) + domain = sh->fdb_domain; +else if (resource->ft_type ==MLX5DV_FLOW_TABLE_TYPE_NIC_RX ) + domain = sh->rx_domain; +else + domain = sh->tx_domain; + cache_resource->action = + mlx5_glue->dr_create_flow_action_push_vlan(domain, + resource-Quoted 1 line
vlan_tag);drivers/net/mlx5/mlx5_flow_dv.c +4
-0+if (!cache_resource->action) { +rte_free (cache_resource); + return rte_flow_error_set(error, ENOMEM, +
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,drivers/net/mlx5/mlx5_flow_dv.c +5
-0+ NULL, "cannot create action"); + } +rte_atomic32_init (&cache_resource->refcnt); +rte_atomic32_inc (&cache_resource->refcnt); + LIST_INSERT_HEAD(&sh->push_vlan_action_list, cache_resource,next);
drivers/net/mlx5/mlx5_flow_dv.c +39
-0+ dev_flow->dv.push_vlan_res = cache_resource; +DRV_LOG (DEBUG ,"new push vlan action resource %p: refcnt %d++" , + (void *)cache_resource, +rte_atomic32_read (&cache_resource->refcnt)); +return 0 ; +} +/** * Get the size of specific rte_flow_item_type * * @param[in] item_type @@ -1719,6 +1894,44 @@ struct field_modify_info modify_tcp[] = { }/** +* Create action push VLAN. +* +* @param[in] dev +* Pointer to rte_eth_dev structure. +* @param[in] vlan_tag +* the vlan tag to push to the Ethernet header. +* @param[in, out] dev_flow +* Pointer to the mlx5_flow. +* @param[in] attr +* Pointer to the flow attributes. +* @param[out] error +* Pointer to the error structure. +* +* @return +* 0 on success, a negative errno value otherwise and rte_errno is set. +*/ +static int +flow_dv_create_action_push_vlan (struct rte_eth_dev *dev, +const struct rte_flow_attr *attr, +const struct rte_vlan_hdr *vlan, +struct mlx5_flow *dev_flow, +struct rte_flow_error *error) +{ +struct mlx5_flow_dv_push_vlan_action_resource res; + + res.vlan_tag = +rte_cpu_to_be_32 (((uint32_t )vlan->eth_proto) <<16 | + vlan->vlan_tci); +if (attr->transfer) + res.ft_type =MLX5DV_FLOW_TABLE_TYPE_FDB ; +else + res.ft_type = attr->egress ?
MLX5DV_FLOW_TABLE_TYPE_NIC_TX:
+MLX5DV_FLOW_TABLE_TYPE_NIC_RX;drivers/net/mlx5/mlx5_flow_dv.c +14
-0+return flow_dv_push_vlan_action_resource_register + (dev, &res, dev_flow, error); +} + +/** * Validate the modify-header actions. * * @param[in] action_flags @@ -3174,6 +3387,15 @@ struct field_modify_info modify_tcp[] = { action_flags |=MLX5_FLOW_ACTION_OF_POP_VLAN ; ++actions_n;break ; +case RTE_FLOW_ACTION_TYPE_OF_PUSH_VLAN : + ret =flow_dv_validate_action_push_vlan (action_flags, + actions, attr, + error); +if (ret <0 ) +return ret; + action_flags |=MLX5_FLOW_ACTION_OF_PUSH_VLAN ; + ++actions_n; +break ;drivers/net/mlx5/mlx5_flow_dv.c +0
-0case RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP :case RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP : ret =flow_dv_validate_action_l2_encap(action_flags,
drivers/net/mlx5/mlx5_flow_dv.c +15
-0@@ -4765,6 +4987,8 @@ struct field_modify_info modify_tcp[] = {void *match_mask = matcher.mask.buf;void *match_value = dev_flow->dv.value.buf;uint8_t next_protocol =0xff ; +struct rte_vlan_hdr vlan = {0 }; +bool vlan_inherited = false; flow->group = attr->group;if (attr->transfer)@@ -4879,6 +5103,21 @@ struct field_modify_info modify_tcp[] = { priv->sh->pop_vlan_action; action_flags |=MLX5_FLOW_ACTION_OF_POP_VLAN ;break ; +case RTE_FLOW_ACTION_TYPE_OF_PUSH_VLAN : +if (!vlan_inherited) { +flow_dev_get_vlan_info_from_items (items, &vlan); + vlan_inherited = true; + } + vlan.eth_proto =rte_be_to_cpu_16 + ((((const struct rte_flow_action_of_push_vlan *) + actions->conf)- >ethertype)); +if (flow_dv_create_action_push_vlan + (dev, attr, &vlan, dev_flow, error)) +return -rte_errno; + dev_flow->dv.actions[actions_n++] = + dev_flow->dv.push_vlan_res-Quoted 1 line
action;
drivers/net/mlx5/mlx5_flow_dv.c +1
-0+ action_flags |=
MLX5_FLOW_ACTION_OF_PUSH_VLAN;drivers/net/mlx5/mlx5_flow_dv.c +33
-0+break ;case RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP :case RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP : if (flow_dv_create_action_l2_encap(dev, actions,@@ -5526,6 +5765,37 @@ struct field_modify_info modify_tcp[] = { }/** +* Release push vlan action resource. +* +* @param flow +* Pointer to mlx5_flow. +* +* @return +* 1 while a reference on it exists, 0 when freed. +*/ +static int +flow_dv_push_vlan_action_resource_release (struct mlx5_flow *flow) { +struct mlx5_flow_dv_push_vlan_action_resource *cache_resource = + flow->dv.push_vlan_res; + +assert (cache_resource->action); +DRV_LOG (DEBUG ,"push VLAN action resource %p: refcnt %d--" , + (void *)cache_resource, +rte_atomic32_read (&cache_resource->refcnt)); +if (rte_atomic32_dec_and_test (&cache_resource->refcnt)) { +claim_zero (mlx5_glue->destroy_flow_action + (cache_resource->action)); +LIST_REMOVE (cache_resource, next); +rte_free (cache_resource); +DRV_LOG (DEBUG ,"push vlan action resource %p: removed" , + (void *)cache_resource); +return 0 ; + } +return 1 ; +} + +/** * Remove the flow from the NIC but keeps it in memory. * * @param[in] dev @@ -5597,6 +5867,8 @@ struct field_modify_info modify_tcp[] = {flow_dv_jump_tbl_resource_release (dev_flow);if (dev_flow->dv.port_id_action)flow_dv_port_id_action_resource_release (dev_flow); +if (dev_flow->dv.push_vlan_res) +flow_dv_push_vlan_action_resource_release (dev_flow);rte_free (dev_flow);}
}
--
1.8.3.1
PATCH v5 5/7 net/mlx5: support modify VLAN priority on VLAN hdr
In reply to Moti HaimovskyThis commit adds support for modifying the VLAN priority (PCP) field in about-to-be-pushed VLAN header.
This feature can only modify the PCP field of a new VLAN header yet to be pushed. It does not support modifying an existing or already pushed VLAN headers.
---
v4:
- Fixed typo in an error message.
--- doc/guides/nics/mlx5.rst | 5 ++- doc/guides/rel_notes/release_19_11.rst | 1 + drivers/net/mlx5/mlx5_flow_dv.c | 62 ++++++++++++++++++++++++++++++++++ 3 files changed, 67 insertions(+), 1 deletion(-)
doc/guides/nics/mlx5.rst +4 -1
@@ -132,6 +132,8 @@ Limitations - VLAN push offload is not supported on ingress traffic. +- VLAN set PCP offload is not supported on existing headers. + - A multi segment packet must have not more segments than reported by dev_infos_get() in tx_desc_lim.nb_seg_max field. This value depends on maximal supported Tx descriptor size and ``txq_inline_min`` settings and may be from 2 (worst case forced by maximal
@@ -1042,7 +1044,8 @@ Supported hardware offloads +-----------------------+-----------------+-----------------+ | | VLAN | | DPDK 19.11 | | DPDK 19.11 | | | (of_pop_vlan / | | OFED 4.6-4 | | OFED 4.6-4 | - | | of_push_vlan) | | ConnectX-5 | | ConnectX-5 | + | | of_push_vlan / | | ConnectX-5 | | ConnectX-5 | + | | of_set_vlan_pcp) | | | +-----------------------+-----------------+-----------------+ Notes for testpmd
doc/guides/rel_notes/release_19_11.rst +1 -0
@@ -229,4 +229,5 @@ Tested Platforms * Added support for VLAN pop flow offload command. * Added support for VLAN push flow offload command. + * Added support for VLAN set PCP offload command.
drivers/net/mlx5/mlx5_flow_dv.c +62 -0
86 lines not on this page · raw message
Signature · 1 line
1.8.3.1
Re: [dpdk-dev] [PATCH v5 5/7] net/mlx5: support modify VLAN priority on VLAN hdr
Quoted 8 lines
-----Original Message-----
From: Moti Haimovsky <[email protected]>
Sent: Monday, September 9, 2019 18:57
To: Slava Ovsiienko <[email protected]>; Raslan Darawsheh <[email protected]>
Cc: [email protected]
Subject: [PATCH v5 5/7] net/mlx5: support modify VLAN priority on VLAN hdr
Quoted 7 lines
This commit adds support for modifying the VLAN priority (PCP) field in about-to-be-pushed VLAN header.
This feature can only modify the PCP field of a new VLAN header yet to be pushed. It does not support modifying an existing or already pushed VLAN headers.Signed-off-by Moti Haimovsky <[email protected]>
Quoted 153 lines
---
v4:
- Fixed typo in an error message.--- doc/guides/nics/mlx5.rst | 5 ++- doc/guides/rel_notes/release_19_11.rst | 1 + drivers/net/mlx5/mlx5_flow_dv.c | 62 ++++++++++++++++++++++++++++++++++ 3 files changed, 67 insertions(+), 1 deletion(-)doc/guides/nics/mlx5.rst index renamed from doc/guides/nics/mlx5.rst +0
-0875a87f..01215f4 100644
doc/guides/nics/mlx5.rst +2
-0@@ -132,6 +132,8 @@ Limitations - VLAN push offload is not supported on ingress traffic. +- VLAN set PCP offload is not supported on existing headers. + - A multi segment packet must have not more segments than reported by dev_infos_get() in tx_desc_lim.nb_seg_max field. This value depends on maximal supportedTx descriptor
size and ``txq_inline_min`` settings and may be from 2 (worst case forced
by maximal @@ -1042,7 +1044,8 @@ Supported hardware offloads+-----------------------+-----------------+-----------------+ | | VLAN | | DPDK 19.11 | | DPDK 19.11 | | | (of_pop_vlan / | | OFED 4.6-4 | | OFED 4.6-4 |doc/guides/nics/mlx5.rst +2
-1- | | of_push_vlan) | | ConnectX-5 | | ConnectX-5 | + | | of_push_vlan / | | ConnectX-5 | | ConnectX-5 | + | | of_set_vlan_pcp) | | | +-----------------------+-----------------+-----------------+ Notes for testpmddoc/guides/rel_notes/release_19_11.rst +1
-0@@ -229,4 +229,5 @@ Tested Platforms * Added support for VLAN pop flow offload command. * Added support for VLAN push flow offload command. + * Added support for VLAN set PCP offload command.(quoted diff) +0
-0
b/drivers/net/mlx5/mlx5_flow_dv.cindex 2780735..73459a0 100644drivers/net/mlx5/mlx5_flow_dv.c +36
-0@@ -974,6 +974,47 @@ struct field_modify_info modify_tcp[] = { }/** +* Validate the set VLAN PCP. +* +* @param[in] action_flags +* Holds the actions detected until now. +* @param[in] actions +* Pointer to the list of actions remaining in the flow rule. +* @param[in] attr +* Pointer to flow attributes +* @param[out] error +* Pointer to error structure. +* +* @return +* 0 on success, a negative errno value otherwise and rte_errno is set. +*/ +static int +flow_dv_validate_action_set_vlan_pcp (uint64_t action_flags, +const struct rte_flow_action actions[], +struct rte_flow_error *error) +{ +const struct rte_flow_action *action = actions; +const struct rte_flow_action_of_set_vlan_pcp *conf = action->conf; + +if (conf->vlan_pcp >7 ) +return rte_flow_error_set (error,EINVAL , +RTE_FLOW_ERROR_TYPE_ACTION , action, +"VLAN PCP value is too big" ); +if (mlx5_flow_find_action (actions, +RTE_FLOW_ACTION_TYPE_OF_PUSH_VLAN ) ==NULL ) +return rte_flow_error_set (error,ENOTSUP , +RTE_FLOW_ERROR_TYPE_ACTION , action, +"set VLAN PCP can only be used " +"with push VLAN action" ); +if (action_flags &MLX5_FLOW_ACTION_OF_PUSH_VLAN ) + return rte_flow_error_set(error, ENOTSUP, + RTE_FLOW_ERROR_TYPE_ACTION, action, + "set VLAN PCP action must precede"
drivers/net/mlx5/mlx5_flow_dv.c +12
-0+ "the push VLAN action"); +return 0 ; +} + +/** * Validate count action. * * @param[in] dev @@ -3396,6 +3437,13 @@ struct field_modify_info modify_tcp[] = { action_flags |=MLX5_FLOW_ACTION_OF_PUSH_VLAN ; ++actions_n;break ; +case RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_PCP : + ret =flow_dv_validate_action_set_vlan_pcp + (action_flags, actions, error); +if (ret <0 ) +return ret; +/* Count PCP with push_vlan command. */ +break ;case RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP :case RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP :ret =
flow_dv_validate_action_l2_encap(action_flags,drivers/net/mlx5/mlx5_flow_dv.c +9
-0@@ -4989,6 +5037,7 @@ struct field_modify_info modify_tcp[] = {uint8_t next_protocol =0xff ;struct rte_vlan_hdr vlan = {0 };bool vlan_inherited = false; +uint16_t vlan_tci; flow->group = attr->group;if (attr->transfer)@@ -5118,6 +5167,19 @@ struct field_modify_info modify_tcp[] = { dev_flow->dv.push_vlan_res- >action; action_flags |=MLX5_FLOW_ACTION_OF_PUSH_VLAN ;break ; +case RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_PCP : +if (!vlan_inherited) { +flow_dev_get_vlan_info_from_items (items, &vlan); + vlan_inherited = true; + } + vlan_tci = + ((const struct rte_flow_action_of_set_vlan_pcp *) + actions->conf)-Quoted 1 line
vlan_pcp;drivers/net/mlx5/mlx5_flow_dv.c +1
-0+ vlan_tci = vlan_tci <<
MLX5DV_FLOW_VLAN_PCP_SHIFT;drivers/net/mlx5/mlx5_flow_dv.c +4
-1+ vlan.vlan_tci &= ~MLX5DV_FLOW_VLAN_PCP_MASK ; + vlan.vlan_tci |= vlan_tci; +/* Push VLAN command will use this value */ +break ;case RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP :case RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP : if (flow_dv_create_action_l2_encap(dev, actions, --1.8.3.1
Re: [dpdk-dev] [PATCH v5 5/7] net/mlx5: support modify VLAN priority on VLAN hdr
In reply to Moti HaimovskyQuoted 8 lines
-----Original Message-----
From: Moti Haimovsky <[email protected]>
Sent: Monday, September 9, 2019 18:57
To: Slava Ovsiienko <[email protected]>; Raslan Darawsheh <[email protected]>
Cc: [email protected]
Subject: [PATCH v5 5/7] net/mlx5: support modify VLAN priority on VLAN hdr
Quoted 7 lines
This commit adds support for modifying the VLAN priority (PCP) field in about-to-be-pushed VLAN header.
This feature can only modify the PCP field of a new VLAN header yet to be pushed. It does not support modifying an existing or already pushed VLAN headers.Signed-off-by Moti Haimovsky <[email protected]>
Quoted 153 lines
---
v4:
- Fixed typo in an error message.--- doc/guides/nics/mlx5.rst | 5 ++- doc/guides/rel_notes/release_19_11.rst | 1 + drivers/net/mlx5/mlx5_flow_dv.c | 62 ++++++++++++++++++++++++++++++++++ 3 files changed, 67 insertions(+), 1 deletion(-)doc/guides/nics/mlx5.rst index renamed from doc/guides/nics/mlx5.rst +0
-0875a87f..01215f4 100644
doc/guides/nics/mlx5.rst +2
-0@@ -132,6 +132,8 @@ Limitations - VLAN push offload is not supported on ingress traffic. +- VLAN set PCP offload is not supported on existing headers. + - A multi segment packet must have not more segments than reported by dev_infos_get() in tx_desc_lim.nb_seg_max field. This value depends on maximal supportedTx descriptor
size and ``txq_inline_min`` settings and may be from 2 (worst case forced
by maximal @@ -1042,7 +1044,8 @@ Supported hardware offloads+-----------------------+-----------------+-----------------+ | | VLAN | | DPDK 19.11 | | DPDK 19.11 | | | (of_pop_vlan / | | OFED 4.6-4 | | OFED 4.6-4 |doc/guides/nics/mlx5.rst +2
-1- | | of_push_vlan) | | ConnectX-5 | | ConnectX-5 | + | | of_push_vlan / | | ConnectX-5 | | ConnectX-5 | + | | of_set_vlan_pcp) | | | +-----------------------+-----------------+-----------------+ Notes for testpmddoc/guides/rel_notes/release_19_11.rst +1
-0@@ -229,4 +229,5 @@ Tested Platforms * Added support for VLAN pop flow offload command. * Added support for VLAN push flow offload command. + * Added support for VLAN set PCP offload command.(quoted diff) +0
-0
b/drivers/net/mlx5/mlx5_flow_dv.cindex 2780735..73459a0 100644drivers/net/mlx5/mlx5_flow_dv.c +36
-0@@ -974,6 +974,47 @@ struct field_modify_info modify_tcp[] = { }/** +* Validate the set VLAN PCP. +* +* @param[in] action_flags +* Holds the actions detected until now. +* @param[in] actions +* Pointer to the list of actions remaining in the flow rule. +* @param[in] attr +* Pointer to flow attributes +* @param[out] error +* Pointer to error structure. +* +* @return +* 0 on success, a negative errno value otherwise and rte_errno is set. +*/ +static int +flow_dv_validate_action_set_vlan_pcp (uint64_t action_flags, +const struct rte_flow_action actions[], +struct rte_flow_error *error) +{ +const struct rte_flow_action *action = actions; +const struct rte_flow_action_of_set_vlan_pcp *conf = action->conf; + +if (conf->vlan_pcp >7 ) +return rte_flow_error_set (error,EINVAL , +RTE_FLOW_ERROR_TYPE_ACTION , action, +"VLAN PCP value is too big" ); +if (mlx5_flow_find_action (actions, +RTE_FLOW_ACTION_TYPE_OF_PUSH_VLAN ) ==NULL ) +return rte_flow_error_set (error,ENOTSUP , +RTE_FLOW_ERROR_TYPE_ACTION , action, +"set VLAN PCP can only be used " +"with push VLAN action" ); +if (action_flags &MLX5_FLOW_ACTION_OF_PUSH_VLAN ) + return rte_flow_error_set(error, ENOTSUP, + RTE_FLOW_ERROR_TYPE_ACTION, action, + "set VLAN PCP action must precede"
drivers/net/mlx5/mlx5_flow_dv.c +12
-0+ "the push VLAN action"); +return 0 ; +} + +/** * Validate count action. * * @param[in] dev @@ -3396,6 +3437,13 @@ struct field_modify_info modify_tcp[] = { action_flags |=MLX5_FLOW_ACTION_OF_PUSH_VLAN ; ++actions_n;break ; +case RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_PCP : + ret =flow_dv_validate_action_set_vlan_pcp + (action_flags, actions, error); +if (ret <0 ) +return ret; +/* Count PCP with push_vlan command. */ +break ;case RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP :case RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP :ret =
flow_dv_validate_action_l2_encap(action_flags,drivers/net/mlx5/mlx5_flow_dv.c +9
-0@@ -4989,6 +5037,7 @@ struct field_modify_info modify_tcp[] = {uint8_t next_protocol =0xff ;struct rte_vlan_hdr vlan = {0 };bool vlan_inherited = false; +uint16_t vlan_tci; flow->group = attr->group;if (attr->transfer)@@ -5118,6 +5167,19 @@ struct field_modify_info modify_tcp[] = { dev_flow->dv.push_vlan_res- >action; action_flags |=MLX5_FLOW_ACTION_OF_PUSH_VLAN ;break ; +case RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_PCP : +if (!vlan_inherited) { +flow_dev_get_vlan_info_from_items (items, &vlan); + vlan_inherited = true; + } + vlan_tci = + ((const struct rte_flow_action_of_set_vlan_pcp *) + actions->conf)-Quoted 1 line
vlan_pcp;drivers/net/mlx5/mlx5_flow_dv.c +1
-0+ vlan_tci = vlan_tci <<
MLX5DV_FLOW_VLAN_PCP_SHIFT;drivers/net/mlx5/mlx5_flow_dv.c +4
-1+ vlan.vlan_tci &= ~MLX5DV_FLOW_VLAN_PCP_MASK ; + vlan.vlan_tci |= vlan_tci; +/* Push VLAN command will use this value */ +break ;case RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP :case RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP : if (flow_dv_create_action_l2_encap(dev, actions, --1.8.3.1
PATCH v5 6/7 net/mlx5: supp modify VLAN ID on new VLAN header
In reply to Moti HaimovskyThis commit adds support for modifying the VLAN ID (VID) field in an about-to-be-pushed VLAN header.
This feature can only modify the VID field of a new VLAN header yet to be pushed. It does not support modifying an existing or already pushed VLAN headers.
---
v4:
- Fixed typo in an error message.
- Fixed bug in verifying VLAN VID value, used 0xFFFE instead of 0xFFE.
--- doc/guides/nics/mlx5.rst | 5 ++- doc/guides/rel_notes/release_19_11.rst | 1 + drivers/net/mlx5/mlx5_flow_dv.c | 59 ++++++++++++++++++++++++++++++++++ 3 files changed, 64 insertions(+), 1 deletion(-)
doc/guides/nics/mlx5.rst +4 -1
@@ -134,6 +134,8 @@ Limitations - VLAN set PCP offload is not supported on existing headers. +- VLAN set VID offload is not supported on existing headers. + - A multi segment packet must have not more segments than reported by dev_infos_get() in tx_desc_lim.nb_seg_max field. This value depends on maximal supported Tx descriptor size and ``txq_inline_min`` settings and may be from 2 (worst case forced by maximal
@@ -1045,7 +1047,8 @@ Supported hardware offloads | | VLAN | | DPDK 19.11 | | DPDK 19.11 | | | (of_pop_vlan / | | OFED 4.6-4 | | OFED 4.6-4 | | | of_push_vlan / | | ConnectX-5 | | ConnectX-5 | - | | of_set_vlan_pcp) | | | + | | of_set_vlan_pcp / | | | + | | of_set_vlan_vid) | | | +-----------------------+-----------------+-----------------+ Notes for testpmd
doc/guides/rel_notes/release_19_11.rst +1 -0
@@ -230,4 +230,5 @@ Tested Platforms * Added support for VLAN pop flow offload command. * Added support for VLAN push flow offload command. * Added support for VLAN set PCP offload command. + * Added support for VLAN set VID offload command.
drivers/net/mlx5/mlx5_flow_dv.c +59 -0
77 lines not on this page · raw message
Signature · 1 line
1.8.3.1
PATCH v5 7/7 net/mlx5: supp modify VLAN ID on existing VLAN hdr
In reply to Moti HaimovskyThis commit adds support for modifying the VID of the outermost VLAN header already present in the packet.
--- doc/guides/nics/mlx5.rst | 20 ++++----- drivers/net/mlx5/mlx5_flow.h | 3 +- drivers/net/mlx5/mlx5_flow_dv.c | 89 ++++++++++++++++++++++++++++++++++++----- drivers/net/mlx5/mlx5_prm.h | 1 + 4 files changed, 92 insertions(+), 21 deletions(-)
doc/guides/nics/mlx5.rst +11 -9
@@ -134,8 +134,6 @@ Limitations - VLAN set PCP offload is not supported on existing headers. -- VLAN set VID offload is not supported on existing headers. - - A multi segment packet must have not more segments than reported by dev_infos_get() in tx_desc_lim.nb_seg_max field. This value depends on maximal supported Tx descriptor size and ``txq_inline_min`` settings and may be from 2 (worst case forced by maximal
@@ -1021,13 +1019,17 @@ Supported hardware offloads | | (set_ipv4_src / | | OFED 4.6-2 | | OFED 4.6-2 | | | set_ipv4_dst / | | rdma-core 24 | | rdma-core 23 | | | set_ipv6_src / | | ConnectX-5 | | ConnectX-5 | - | | set_ipv6_dst / | | | - | | set_tp_src / | | | - | | set_tp_dst / | | | - | | dec_ttl / | | | - | | set_ttl / | | | - | | set_mac_src / | | | - | | set_mac_dst) | | | + | | set_ipv6_dst / | | | | | + | | set_tp_src / | | | | | + | | set_tp_dst / | | | | | + | | dec_ttl / | | | | | + | | set_ttl / | | | | | + | | set_mac_src / | | | | | + | | set_mac_dst) | | | | | + | | | | | | | + | | (of_set_vlan_vid) | | DPDK 19.11 | | DPDK 19.11 | + | | | OFED 4.6-4 | | OFED 4.6-4 | + | | | ConnectX-5 | | ConnectX-5 | +-----------------------+-----------------+-----------------+ | Jump | | DPDK 19.05 | | DPDK 19.02 | | | | OFED 4.6-4 | | OFED 4.6-4 |
drivers/net/mlx5/mlx5_flow.h +2 -1
@@ -171,7 +171,8 @@MLX5_FLOW_ACTION_INC_TCP_SEQ | \MLX5_FLOW_ACTION_DEC_TCP_SEQ | \MLX5_FLOW_ACTION_INC_TCP_ACK | \ - MLX5_FLOW_ACTION_DEC_TCP_ACK) +MLX5_FLOW_ACTION_DEC_TCP_ACK | \ + MLX5_FLOW_ACTION_OF_SET_VLAN_VID) #define MLX5_FLOW_VLAN_ACTIONS (MLX5_FLOW_ACTION_OF_POP_VLAN | \MLX5_FLOW_ACTION_OF_PUSH_VLAN )
drivers/net/mlx5/mlx5_flow_dv.c +78 -11
141 lines not on this page · raw message
drivers/net/mlx5/mlx5_prm.h +1 -0
@@ -413,6 +413,7 @@ enum mlx5_modification_field {MLX5_MODI_OUT_DIPV6_31_0 ,MLX5_MODI_OUT_SIPV4 ,MLX5_MODI_OUT_DIPV4 , +MLX5_MODI_OUT_FIRST_VID ,MLX5_MODI_IN_SMAC_47_16 =0x31 ,MLX5_MODI_IN_SMAC_15_0 , MLX5_MODI_IN_ETHERTYPE,
Signature · 1 line
1.8.3.1
Re: [dpdk-dev] [PATCH v5 7/7] net/mlx5: supp modify VLAN ID on existing VLAN hdr
Quoted 8 lines
-----Original Message-----
From: Moti Haimovsky <[email protected]>
Sent: Monday, September 9, 2019 18:57
To: Slava Ovsiienko <[email protected]>; Raslan Darawsheh <[email protected]>
Cc: [email protected]
Subject: [PATCH v5 7/7] net/mlx5: supp modify VLAN ID on existing VLAN hdr
Quoted 4 lines
This commit adds support for modifying the VID of the outermost VLAN header already present in the packet.
Signed-off-by Moti Haimovsky <[email protected]>
Quoted 247 lines
--- doc/guides/nics/mlx5.rst | 20 ++++----- drivers/net/mlx5/mlx5_flow.h | 3 +- drivers/net/mlx5/mlx5_flow_dv.c | 89 ++++++++++++++++++++++++++++++++++++----- drivers/net/mlx5/mlx5_prm.h | 1 + 4 files changed, 92 insertions(+), 21 deletions(-)doc/guides/nics/mlx5.rst index renamed from doc/guides/nics/mlx5.rst +0
-03a2a366..c2e9003 100644
doc/guides/nics/mlx5.rst +0
-2@@ -134,8 +134,6 @@ Limitations - VLAN set PCP offload is not supported on existing headers. -- VLAN set VID offload is not supported on existing headers. - - A multi segment packet must have not more segments than reported by dev_infos_get() in tx_desc_lim.nb_seg_max field. This value depends on maximal supportedTx descriptor
size and ``txq_inline_min`` settings and may be from 2 (worst case forced
by maximal @@ -1021,13 +1019,17 @@ Supported hardware offloads| | (set_ipv4_src / | | OFED 4.6-2 | | OFED 4.6-2 | | | set_ipv4_dst / | | rdma-core 24 | | rdma-core 23 | | | set_ipv6_src / | | ConnectX-5 | | ConnectX-5 |doc/guides/nics/mlx5.rst +11
-7- | | set_ipv6_dst / | | | - | | set_tp_src / | | | - | | set_tp_dst / | | | - | | dec_ttl / | | | - | | set_ttl / | | | - | | set_mac_src / | | | - | | set_mac_dst) | | | + | | set_ipv6_dst / | | | | | + | | set_tp_src / | | | | | + | | set_tp_dst / | | | | | + | | dec_ttl / | | | | | + | | set_ttl / | | | | | + | | set_mac_src / | | | | | + | | set_mac_dst) | | | | | + | | | | | | | + | | (of_set_vlan_vid) | | DPDK 19.11 | | DPDK 19.11 | + | | | OFED 4.6-4 | | OFED 4.6-4 | + | | | ConnectX-5 | | ConnectX-5 | +-----------------------+-----------------+-----------------+ | Jump | | DPDK 19.05 | | DPDK 19.02 | | | | OFED 4.6-4 | | OFED 4.6-4 |drivers/net/mlx5/mlx5_flow.h +2
-1@@ -171,7 +171,8 @@MLX5_FLOW_ACTION_INC_TCP_SEQ | \MLX5_FLOW_ACTION_DEC_TCP_SEQ | \MLX5_FLOW_ACTION_INC_TCP_ACK | \ - MLX5_FLOW_ACTION_DEC_TCP_ACK) +MLX5_FLOW_ACTION_DEC_TCP_ACK | \ + MLX5_FLOW_ACTION_OF_SET_VLAN_VID) #define MLX5_FLOW_VLAN_ACTIONS(
MLX5_FLOW_ACTION_OF_POP_VLAN| \drivers/net/mlx5/mlx5_flow.h +0
-0MLX5_FLOW_ACTION_OF_PUSH_VLAN)(quoted diff) +0
-0
b/drivers/net/mlx5/mlx5_flow_dv.cindex 4b68aa6..330a868 100644drivers/net/mlx5/mlx5_flow_dv.c +46
-0@@ -115,6 +115,12 @@ struct field_modify_info modify_eth[] = { {0, 0, 0}, }; +struct field_modify_info modify_vlan_out_first_vid[] = { +/* Size in bits !!! */ + {12 ,0 ,MLX5_MODI_OUT_FIRST_VID }, + {0 ,0 ,0 }, +}; +struct field_modify_info modify_ipv4[] = { {1 ,8 ,MLX5_MODI_OUT_IPV4_TTL }, {4, 12, MLX5_MODI_OUT_SIPV4},@@ -397,6 +403,46 @@ struct field_modify_info modify_tcp[] = { }/** +* Convert modify-header set VLAN VID action to DV specification. +* +* @param[in,out] resource +* Pointer to the modify-header resource. +* @param[in] action +* Pointer to action specification. +* @param[out] error +* Pointer to the error structure. +* +* @return +* 0 on success, a negative errno value otherwise and rte_errno is set. +*/ +static int +flow_dv_convert_action_modify_vlan_vid + (struct mlx5_flow_dv_modify_hdr_resource *resource, +const struct rte_flow_action *action, +struct rte_flow_error *error) +{ +const struct rte_flow_action_of_set_vlan_vid *conf = + (const struct rte_flow_action_of_set_vlan_vid *)(action- >conf); +int i = resource->actions_num; +struct mlx5_modification_cmd *actions = &resource->actions[i]; +struct field_modify_info *field = modify_vlan_out_first_vid; + +if (i >=MLX5_MODIFY_NUM ) +return rte_flow_error_set (error,EINVAL , +RTE_FLOW_ERROR_TYPE_ACTION ,NULL , +"too many items to modify" ); + actions[i].action_type =MLX5_MODIFICATION_TYPE_SET ; + actions[i].field = field->id; + actions[i].length = field->size; + actions[i].offset = field->offset; + actions[i].data0 =rte_cpu_to_be_32 (actions[i].data0); + actions[i].data1 = conf->vlan_vid; + actions[i].data1 = actions[i].data1 <<16 ; + resource->actions_num = ++i; +return 0 ; +} + +/** * Convert modify-header set TP action to DV specification. * * @param[in,out] resource
drivers/net/mlx5/mlx5_flow_dv.c +15
-8@@ -1017,8 +1063,8 @@ struct field_modify_info modify_tcp[] = {/** * Validate the set VLAN VID. * -* @param[in] action_flags -* Holds the actions detected until now. +* @param[in] item_flags +* Holds the items detected in this rule. * @param[in] actions * Pointer to the list of actions remaining in the flow rule. * @param[in] attr @@ -1030,7 +1076,7 @@ struct field_modify_info modify_tcp[] = {* 0 on success, a negative errno value otherwise and rte_errno is set. */ static int -flow_dv_validate_action_set_vlan_vid (uint64_t action_flags, +flow_dv_validate_action_set_vlan_vid (uint64_t item_flags,const struct rte_flow_action actions[],struct rte_flow_error *error) {@@ -1041,17 +1087,27 @@ struct field_modify_info modify_tcp[] = {return rte_flow_error_set (error,EINVAL ,RTE_FLOW_ERROR_TYPE_ACTION , action,"VLAN VID value is too big" ); +/* If a push VLAN action follows then it will handle this action */ if (mlx5_flow_find_action (actions, -RTE_FLOW_ACTION_TYPE_OF_PUSH_VLAN ) ==NULL ) + RTE_FLOW_ACTION_TYPE_OF_PUSH_VLAN)) +return 0 ; + +/* +* Action is on an existing VLAN header: +* Need to verify this is a single modify CID action. +* Rule mast include a match on outer VLAN. +*/ +if (mlx5_flow_find_action (++action, +RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_VID )) return rte_flow_error_set(error, ENOTSUP, RTE_FLOW_ERROR_TYPE_ACTION, action, -"set VLAN VID can only be used " -"with push VLAN action" ); -if (action_flags &MLX5_FLOW_ACTION_OF_PUSH_VLAN ) - return rte_flow_error_set(error, ENOTSUP, + "Multiple VLAN VID modificationsare "
drivers/net/mlx5/mlx5_flow_dv.c +3
-0+ "not supported"); +if (!(item_flags &MLX5_FLOW_LAYER_OUTER_VLAN )) + return rte_flow_error_set(error, EINVAL, RTE_FLOW_ERROR_TYPE_ACTION,action,
drivers/net/mlx5/mlx5_flow_dv.c +0
-1- "set VLAN VID action must precede"
drivers/net/mlx5/mlx5_flow_dv.c +1
-1- "the push VLAN action"); + "match on VLAN is required in order"
drivers/net/mlx5/mlx5_flow_dv.c +2
-1+ "to set VLAN VID");return 0 ; }@@ -3487,7 +3543,7 @@ struct field_modify_info modify_tcp[] = {break ;case RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_VID : ret =flow_dv_validate_action_set_vlan_vid - (action_flags, actions, error); + (item_flags, actions, error);if (ret <0 )return ret; /* Count VID with push_vlan command. */ @@ -5214,6 +5270,8 @@ struct
field_modify_infomodify_tcp[] = {drivers/net/mlx5/mlx5_flow_dv.c +0
-0dev_flow->dv.actions[actions_n++] = dev_flow->dv.push_vlan_res-Quoted 1 line
action;
action_flags|=MLX5_FLOW_ACTION_OF_PUSH_VLAN;drivers/net/mlx5/mlx5_flow_dv.c +1
-0+/* Push VLAN command is also handling this
VLAN_VID*/drivers/net/mlx5/mlx5_flow_dv.c +1
-0+ action_flags &=~MLX5_FLOW_ACTION_OF_SET_VLAN_VID;
drivers/net/mlx5/mlx5_flow_dv.c +9
-0break ;case RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_PCP :if (!vlan_inherited) {@@ -5238,6 +5296,15 @@ struct field_modify_info modify_tcp[] = { (((const struct rte_flow_action_of_set_vlan_vid *) actions->conf)->vlan_vid);/* Push VLAN command will use this value */ +if (mlx5_flow_find_action + (actions, +RTE_FLOW_ACTION_TYPE_OF_PUSH_VLAN )) +break ; +/* If no VLAN push - this is a modify header action */ +if (flow_dv_convert_action_modify_vlan_vid + (&res, actions, error)) +return -rte_errno; + action_flags |=MLX5_FLOW_ACTION_OF_SET_VLAN_VID ;break ;drivers/net/mlx5/mlx5_flow_dv.c +0
-0case RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP :case RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP :drivers/net/mlx5/mlx5_prm.h +1
-1@@ -413,6 +413,7 @@ enum mlx5_modification_field {MLX5_MODI_OUT_DIPV6_31_0 ,MLX5_MODI_OUT_SIPV4 ,MLX5_MODI_OUT_DIPV4 , +MLX5_MODI_OUT_FIRST_VID ,MLX5_MODI_IN_SMAC_47_16 =0x31 ,MLX5_MODI_IN_SMAC_15_0 , MLX5_MODI_IN_ETHERTYPE, --1.8.3.1
Quoted 65 lines
-----Original Message-----
From: Moti Haimovsky <[email protected]>
Sent: Monday, September 9, 2019 18:57
To: Slava Ovsiienko <[email protected]>; Raslan Darawsheh <[email protected]>
Cc: [email protected]
Subject: [PATCH v5 0/7] net/mlx5: support for flow action on VLAN headerVLAN actions support is implemented in
librte_ethdev, and in test-pmd application, based on [1] Generic flow API.
These actions conform to the VLAN actions defined in [2] the OpenFlow Switch Specification.
rte_flowdefines the following VLAN actions:
1.OF_POP_VLAN
Pop the outer-most VLAN header from the packet.
2.OF_PUSH_VLAN
Push a new VLAN header onto the packet.
3.OF_SET_VLAN_VID
Sets the ID of the outermost VLAN tag.
4.OF_SET_VLAN_PCP
Sets the 3-bit priority field of the outermost VLAN tag.This series of patches adds support for those VLAN actions to the mlx5 PMD using the Direct Verbs interface.
v2:
- Code rebase on latest commits.v3:
- mlx5 documentation update.v4:
- Update the release notes with new the new features.
- Minor bug fixes.v5:
- Rebase on top of latest commits.
- Minor bug fix in vlan push action.
- Bug fix in the format of the release notes.Moti Haimovsky (7):
net/mlx5: support for an action search in a list net/mlx5: add VLAN push/pop DR commands to glue net/mlx5: support pop flow action on VLAN header net/mlx5: support push flow action on VLAN header net/mlx5: support modify VLAN priority on VLAN hdr net/mlx5: supp modify VLAN ID on new VLAN header net/mlx5: supp modify VLAN ID on existing VLAN hdrdoc/guides/nics/mlx5.rst | 34 ++- doc/guides/rel_notes/release_19_11.rst | 9 + drivers/net/mlx5/Makefile | 5 + drivers/net/mlx5/meson.build | 2 + drivers/net/mlx5/mlx5.c | 9 + drivers/net/mlx5/mlx5.h | 4 + drivers/net/mlx5/mlx5_flow.c | 23 ++ drivers/net/mlx5/mlx5_flow.h | 27 +- drivers/net/mlx5/mlx5_flow_dv.c | 538 +++++++++++++++++++++++++++++++++ drivers/net/mlx5/mlx5_glue.c | 29 ++ drivers/net/mlx5/mlx5_glue.h | 6 + drivers/net/mlx5/mlx5_prm.h | 1 + 12 files changed, 677 insertions(+), 10 deletions(-)
Quoted 2 lines
--
1.8.3.1
Hi,
Series applied to next-net-mlx,
Kindest regards,
Raslan Darawsheh
Quoted 67 lines
-----Original Message-----
From: Moti Haimovsky <[email protected]>
Sent: Monday, September 9, 2019 6:57 PM
To: Slava Ovsiienko <[email protected]>; Raslan Darawsheh <[email protected]>
Cc: [email protected]
Subject: [PATCH v5 0/7] net/mlx5: support for flow action on VLAN headerVLAN actions support is implemented in
librte_ethdev, and in test-pmd application, based on [1] Generic flow API.
These actions conform to the VLAN actions defined in [2] the OpenFlow Switch Specification.
rte_flowdefines the following VLAN actions:
1.OF_POP_VLAN
Pop the outer-most VLAN header from the packet.
2.OF_PUSH_VLAN
Push a new VLAN header onto the packet.
3.OF_SET_VLAN_VID
Sets the ID of the outermost VLAN tag.
4.OF_SET_VLAN_PCP
Sets the 3-bit priority field of the outermost VLAN tag.This series of patches adds support for those VLAN actions to the mlx5 PMD using the Direct Verbs interface.
v2:
- Code rebase on latest commits.v3:
- mlx5 documentation update.v4:
- Update the release notes with new the new features.
- Minor bug fixes.v5:
- Rebase on top of latest commits.
- Minor bug fix in vlan push action.
- Bug fix in the format of the release notes.Moti Haimovsky (7):
net/mlx5: support for an action search in a list net/mlx5: add VLAN push/pop DR commands to glue net/mlx5: support pop flow action on VLAN header net/mlx5: support push flow action on VLAN header net/mlx5: support modify VLAN priority on VLAN hdr net/mlx5: supp modify VLAN ID on new VLAN header net/mlx5: supp modify VLAN ID on existing VLAN hdrdoc/guides/nics/mlx5.rst | 34 ++- doc/guides/rel_notes/release_19_11.rst | 9 + drivers/net/mlx5/Makefile | 5 + drivers/net/mlx5/meson.build | 2 + drivers/net/mlx5/mlx5.c | 9 + drivers/net/mlx5/mlx5.h | 4 + drivers/net/mlx5/mlx5_flow.c | 23 ++ drivers/net/mlx5/mlx5_flow.h | 27 +- drivers/net/mlx5/mlx5_flow_dv.c | 538 +++++++++++++++++++++++++++++++++ drivers/net/mlx5/mlx5_glue.c | 29 ++ drivers/net/mlx5/mlx5_glue.h | 6 + drivers/net/mlx5/mlx5_prm.h | 1 + 12 files changed, 677 insertions(+), 10 deletions(-)--
1.8.3.1
Hello Moti,
I have some questions on the patch.
Just want to know how to use it.
Q1. Is it correct understanding that the patch will be reflected in 19.11 if it is approved?
Q2.Which action should I specify when I want to insert VLAN tag to non-VLAN frame?
OF_PUSH_VLAN and OF_SET_VLAN_VID and OF_SET_VLAN_PCP ?
Q3. Is it possible to detag VLAN when it receives VLAN tagged frame from outside of the host?
Q4. Is it possible to entag VLAN to non-VLAN frame when it sends packet to outside of host?
Q5.Are there any restriction to conbime other ACTIONS like QUEUE?
Q6. Is it possible to apply rte_flow actions for specified tx queue of physical NIC?
(e.g. VM connect with PHY:0 using tx queue index:1, I want to entag VLAN 101 to the traffic from VM to PHY:0 is it possible?)
Thanks in advance!
BR,
Hideyuki Yamashita
NTT TechnoCross
Quoted 41 lines
VLAN actions support is implemented in
librte_ethdev, and in test-pmd application, based on [1] Generic flow API. These actions conform to the VLAN actions defined in
[2] the OpenFlow Switch Specification.
rte_flowdefines the following VLAN actions:
1.OF_POP_VLAN
Pop the outer-most VLAN header from the packet.
2.OF_PUSH_VLAN
Push a new VLAN header onto the packet.
3.OF_SET_VLAN_VID
Sets the ID of the outermost VLAN tag.
4.OF_SET_VLAN_PCP
Sets the 3-bit priority field of the outermost VLAN tag.This series of patches adds support for those VLAN actions to the mlx5 PMD using the Direct Verbs interface.
Moti Haimovsky (7):
net/mlx5: support for an action search in a list net/mlx5: add VLAN push/pop DR commands to glue net/mlx5: support pop flow action on VLAN header net/mlx5: support push flow action on VLAN header net/mlx5: support modify VLAN priority on VLAN hdr net/mlx5: supp modify VLAN ID on new VLAN header net/mlx5: supp modify VLAN ID on existing VLAN hdrdrivers/net/mlx5/Makefile | 5 + drivers/net/mlx5/meson.build | 2 + drivers/net/mlx5/mlx5.c | 9 + drivers/net/mlx5/mlx5.h | 3 + drivers/net/mlx5/mlx5_flow.c | 23 ++ drivers/net/mlx5/mlx5_flow.h | 27 ++- drivers/net/mlx5/mlx5_flow_dv.c | 521 ++++++++++++++++++++++++++++++++++++++++ drivers/net/mlx5/mlx5_glue.c | 29 +++ drivers/net/mlx5/mlx5_glue.h | 6 + drivers/net/mlx5/mlx5_prm.h | 1 + 10 files changed, 623 insertions(+), 3 deletions(-)Signature · 1 line
1.8.3.1
Can somebody (Mellanox guys?) help me out?
Quoted 74 lines
Hello Moti,
I have some questions on the patch.
Just want to know how to use it.Q1. Is it correct understanding that the patch will be reflected in 19.11 if it is approved?
Q2.Which action should I specify when I want to insert VLAN tag to non-VLAN frame?
OF_PUSH_VLANandOF_SET_VLAN_VIDandOF_SET_VLAN_PCP?Q3. Is it possible to detag VLAN when it receives VLAN tagged frame from outside of the host?
Q4. Is it possible to entag VLAN to non-VLAN frame when it sends packet to outside of host?
Q5.Are there any restriction to conbime other ACTIONS like QUEUE?
Q6. Is it possible to apply
rte_flowactions for specified tx queue of physical NIC?
(e.g. VM connect with PHY:0 using tx queue index:1, I want to entag VLAN 101 to the traffic from VM to PHY:0 is it possible?)Thanks in advance!
BR,
Hideyuki Yamashita
NTT TechnoCrossQuoted 41 lines
VLAN actions support is implemented in
librte_ethdev, and in test-pmd application, based on [1] Generic flow API. These actions conform to the VLAN actions defined in
[2] the OpenFlow Switch Specification.
rte_flowdefines the following VLAN actions:
1.OF_POP_VLAN
Pop the outer-most VLAN header from the packet.
2.OF_PUSH_VLAN
Push a new VLAN header onto the packet.
3.OF_SET_VLAN_VID
Sets the ID of the outermost VLAN tag.
4.OF_SET_VLAN_PCP
Sets the 3-bit priority field of the outermost VLAN tag.This series of patches adds support for those VLAN actions to the mlx5 PMD using the Direct Verbs interface.
Moti Haimovsky (7):
net/mlx5: support for an action search in a list net/mlx5: add VLAN push/pop DR commands to glue net/mlx5: support pop flow action on VLAN header net/mlx5: support push flow action on VLAN header net/mlx5: support modify VLAN priority on VLAN hdr net/mlx5: supp modify VLAN ID on new VLAN header net/mlx5: supp modify VLAN ID on existing VLAN hdrdrivers/net/mlx5/Makefile | 5 + drivers/net/mlx5/meson.build | 2 + drivers/net/mlx5/mlx5.c | 9 + drivers/net/mlx5/mlx5.h | 3 + drivers/net/mlx5/mlx5_flow.c | 23 ++ drivers/net/mlx5/mlx5_flow.h | 27 ++- drivers/net/mlx5/mlx5_flow_dv.c | 521 ++++++++++++++++++++++++++++++++++++++++ drivers/net/mlx5/mlx5_glue.c | 29 +++ drivers/net/mlx5/mlx5_glue.h | 6 + drivers/net/mlx5/mlx5_prm.h | 1 + 10 files changed, 623 insertions(+), 3 deletions(-)Signature · 1 line
1.8.3.1
Quoted 10 lines
-----Original Message-----
From: Hideyuki Yamashita <[email protected]>
Sent: Friday, October 4, 2019 13:35
To: Hideyuki Yamashita <[email protected]>
Cc: Moti Haimovsky <[email protected]>; Slava Ovsiienko <[email protected]>; [email protected]
Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on VLAN headerCan somebody (Mellanox guys?) help me out?
Hi, Hideyuki
I'm sorry, there are long holidays in IL, so let me try to answer.
Quoted 8 lines
Quoted 8 lines
Hello Moti,
I have some questions on the patch.
Just want to know how to use it.Q1. Is it correct understanding that the patch will be reflected in 19.11 if it is approved?
Yes, it is merged and should be reflected.
Quoted 5 lines
Quoted 5 lines
Q2.Which action should I specify when I want to insert VLAN tag to non-VLAN frame?
OF_PUSH_VLANandOF_SET_VLAN_VIDandOF_SET_VLAN_PCP?
All of them, OF_PUSH_VLAN inserts the VLAN header, OF_SET_VLAN_VID and OF_SET_VLAN_PCP fill the fields with appropriate values.
Quoted 3 lines
Quoted 3 lines
Q3. Is it possible to detag VLAN when it receives VLAN tagged frame from outside of the host?
Do you mean some complex configuration with multiple VMs and engaged E-Switch feature? Anyway, there are multiple ways to strip (untag) VLAN header:
- with E-Switch rules (including match on specified port)
- with local port rules
- stripping VLAN in Rx queue
Quoted 3 lines
Quoted 3 lines
Q4. Is it possible to entag VLAN to non-VLAN frame when it sends packet to outside of host?
Yes.
Quoted 2 lines
Quoted 2 lines
Q5.Are there any restriction to conbime other ACTIONS like QUEUE?
Should no be. Action QUEUE is on Rx NIC namespace, VLAN POP is supported there.
Quoted 5 lines
Quoted 5 lines
Q6. Is it possible to apply
rte_flowactions for specified tx queue of physical NIC?
(e.g. VM connect with PHY:0 using tx queue index:1, I want to entag VLAN 101 to the traffic from VM to PHY:0 is it possible?)
Directly - no, there is no item to match with specific Tx queue.
If setting VLAN on specific Tx queue is desired we have two options:
- engage Tx offload DEV_TX_OFFLOAD_VLAN_INSERT, and provide VLAN with each packet being transferred to tx_burst
- engage DEV_TX_OFFLOAD_MATCH_METADATA feature, and set specific metadata for all packets on specific queue. Then the rules matching with this metadata may be inserted.
[snip]
With best regards, Slava
Dear Slava and experts,
Thanks for your answering me.
Baased on your answer, I tested using testpmd.
And about the outcome, I have several questions.
[1.Test environment]
OS:Ubuntu18.04
NIC1:MCX4121A-ACAT 25G
NIC2:MCX516A-CCAT 100G
Repo:dpdk-next-net
I checked that the following is shown in git log command. 9f1e94469 net/mlx5: fix netlink rdma socket callback routine 50735012c net/mlx5: support reading module EEPROM data f53a5f917 net/mlx5: support modify VLAN ID on existing VLAN header 9af8046a1 net/mlx5: support modify VLAN ID on new VLAN header 43184603e net/mlx5: support modifying VLAN priority on VLAN header 4f59ffbd8 net/mlx5: support push flow action on VLAN header b4bd8f5da net/mlx5: support pop flow action on VLAN header 048e3e84c net/mlx5: add VLAN push/pop DR commands to glue
[2.Test result]
I tested the follwoing flows with testpmd included in dpdk-next-net.
A.flow create 0 ingress pattern eth / vlan id is 100 / end actions OF_POP_VLAN / end
B.flow create 0 ingress pattern eth dst is BB:BB:BB:BB:BB:BB / end actions OF_PUSH_VLAN ethertype 1000 / end C.flow create 0 ingress pattern eth dst is BB:BB:BB:BB:BB:BB / end actions OF_SET_VLAN_VID vlan_vid 200 / end D.flow create X ingress pattern eth dst is BB:BB:BB:BB:BB:BB / end actions of_SET_VLAN_PCP vlan_pcp 3 / end E.flow create 0 egress pattern eth src is BB:BB:BB:BB:BB:BB / end actions OF_PUSH_VLAN ethertype 1000 / end
A-D, resulted in "Caught error type 16 (specific action): cause: 0x7ffcc711db48, action not supported: Operation not supported". E resulted in "Egress is not supported".
[3. Quetions]
Q1. What is the appropriate flow to entag/detag VLAN using testpmd?
I think related commits are included so it "should" work and my guess is that my flow is somehow wrong.
Q2. Is it correct understanding that "egress" is not supported for mlx5 PMD?
Q3. If yes, is it possible to entag VLAN tag to the outgoing packet from physical NIC by using rte_flow?
BR,
Hideyuki Yamashita
NTT TechnoCross
Quoted 72 lines
Quoted 10 lines
-----Original Message-----
From: Hideyuki Yamashita <[email protected]>
Sent: Friday, October 4, 2019 13:35
To: Hideyuki Yamashita <[email protected]>
Cc: Moti Haimovsky <[email protected]>; Slava Ovsiienko <[email protected]>; [email protected]
Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on VLAN headerCan somebody (Mellanox guys?) help me out?
Hi, Hideyuki
I'm sorry, there are long holidays in IL, so let me try to answer.
Quoted 8 lines
Quoted 8 lines
Hello Moti,
I have some questions on the patch.
Just want to know how to use it.Q1. Is it correct understanding that the patch will be reflected in 19.11 if it is approved?
Yes, it is merged and should be reflected.
Quoted 5 lines
Quoted 5 lines
Q2.Which action should I specify when I want to insert VLAN tag to non-VLAN frame?
OF_PUSH_VLANandOF_SET_VLAN_VIDandOF_SET_VLAN_PCP?All of them,
OF_PUSH_VLANinserts the VLAN header,OF_SET_VLAN_VIDandOF_SET_VLAN_PCPfill the fields with appropriate values.Quoted 3 lines
Quoted 3 lines
Q3. Is it possible to detag VLAN when it receives VLAN tagged frame from outside of the host?
Do you mean some complex configuration with multiple VMs and engaged E-Switch feature? Anyway, there are multiple ways to strip (untag) VLAN header:
- with E-Switch rules (including match on specified port)
- with local port rules
- stripping VLAN in Rx queueQuoted 3 lines
Quoted 3 lines
Q4. Is it possible to entag VLAN to non-VLAN frame when it sends packet to outside of host?
Yes.
Quoted 2 lines
Quoted 2 lines
Q5.Are there any restriction to conbime other ACTIONS like QUEUE?
Should no be. Action QUEUE is on Rx NIC namespace, VLAN POP is supported there.
Quoted 5 lines
Quoted 5 lines
Q6. Is it possible to apply
rte_flowactions for specified tx queue of physical NIC?
(e.g. VM connect with PHY:0 using tx queue index:1, I want to entag VLAN 101 to the traffic from VM to PHY:0 is it possible?)Directly - no, there is no item to match with specific Tx queue.
If setting VLAN on specific Tx queue is desired we have two options:
- engage Tx offload
DEV_TX_OFFLOAD_VLAN_INSERT, and provide VLAN with each packet being transferred totx_burst- engage
DEV_TX_OFFLOAD_MATCH_METADATAfeature, and set specific metadata for all packets on specific queue. Then the rules matching with this metadata may be inserted.[snip]
With best regards, Slava
Dear Slava, Moti and all,
Please let me know if you need more information.
Partial answer is acceptable for me.
Thanks in advaince!
BR,
HIdeyuki Yamashita
NTT TechnoCross
Quoted 119 lines
Dear Slava and experts,
Thanks for your answering me.
Baased on your answer, I tested using testpmd.
And about the outcome, I have several questions.[1.Test environment]
OS:Ubuntu18.04
NIC1:MCX4121A-ACAT 25G
NIC2:MCX516A-CCAT 100G
Repo:dpdk-next-netI checked that the following is shown in git log command.
9f1e94469net/mlx5: fix netlink rdma socket callback routine50735012cnet/mlx5: support reading module EEPROM dataf53a5f917net/mlx5: support modify VLAN ID on existing VLAN header9af8046a1net/mlx5: support modify VLAN ID on new VLAN header43184603enet/mlx5: support modifying VLAN priority on VLAN header4f59ffbd8net/mlx5: support push flow action on VLAN headerb4bd8f5danet/mlx5: support pop flow action on VLAN header048e3e84cnet/mlx5: add VLAN push/pop DR commands to glue[2.Test result]
I tested the follwoing flows with testpmd included in dpdk-next-net.A.flow create 0 ingress pattern eth / vlan id is 100 / end actions
OF_POP_VLAN/ end
B.flow create 0 ingress pattern eth dst is BB:BB:BB:BB:BB:BB / end actionsOF_PUSH_VLANethertype 1000 / end C.flow create 0 ingress pattern eth dst is BB:BB:BB:BB:BB:BB / end actionsOF_SET_VLAN_VIDvlan_vid200 / end D.flow create X ingress pattern eth dst is BB:BB:BB:BB:BB:BB / end actionsof_SET_VLAN_PCPvlan_pcp3 / end E.flow create 0 egress pattern eth src is BB:BB:BB:BB:BB:BB / end actionsOF_PUSH_VLANethertype 1000 / endA-D, resulted in "Caught error type 16 (specific action): cause:
0x7ffcc711db48, action not supported: Operation not supported". E resulted in "Egress is not supported".[3. Quetions]
Q1. What is the appropriate flow to entag/detag VLAN using testpmd?
I think related commits are included so it "should" work and my guess is that my flow is somehow wrong.
Q2. Is it correct understanding that "egress" is not supported for mlx5 PMD?
Q3. If yes, is it possible to entag VLAN tag to the outgoing packet from physical NIC by usingrte_flow?BR,
Hideyuki Yamashita
NTT TechnoCrossQuoted 72 lines
Quoted 10 lines
-----Original Message-----
From: Hideyuki Yamashita <[email protected]>
Sent: Friday, October 4, 2019 13:35
To: Hideyuki Yamashita <[email protected]>
Cc: Moti Haimovsky <[email protected]>; Slava Ovsiienko <[email protected]>; [email protected]
Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on VLAN headerCan somebody (Mellanox guys?) help me out?
Hi, Hideyuki
I'm sorry, there are long holidays in IL, so let me try to answer.
Quoted 8 lines
Quoted 8 lines
Hello Moti,
I have some questions on the patch.
Just want to know how to use it.Q1. Is it correct understanding that the patch will be reflected in 19.11 if it is approved?
Yes, it is merged and should be reflected.
Quoted 5 lines
Quoted 5 lines
Q2.Which action should I specify when I want to insert VLAN tag to non-VLAN frame?
OF_PUSH_VLANandOF_SET_VLAN_VIDandOF_SET_VLAN_PCP?All of them,
OF_PUSH_VLANinserts the VLAN header,OF_SET_VLAN_VIDandOF_SET_VLAN_PCPfill the fields with appropriate values.Quoted 3 lines
Quoted 3 lines
Q3. Is it possible to detag VLAN when it receives VLAN tagged frame from outside of the host?
Do you mean some complex configuration with multiple VMs and engaged E-Switch feature? Anyway, there are multiple ways to strip (untag) VLAN header:
- with E-Switch rules (including match on specified port)
- with local port rules
- stripping VLAN in Rx queueQuoted 3 lines
Quoted 3 lines
Q4. Is it possible to entag VLAN to non-VLAN frame when it sends packet to outside of host?
Yes.
Quoted 2 lines
Quoted 2 lines
Q5.Are there any restriction to conbime other ACTIONS like QUEUE?
Should no be. Action QUEUE is on Rx NIC namespace, VLAN POP is supported there.
Quoted 5 lines
Quoted 5 lines
Q6. Is it possible to apply
rte_flowactions for specified tx queue of physical NIC?
(e.g. VM connect with PHY:0 using tx queue index:1, I want to entag VLAN 101 to the traffic from VM to PHY:0 is it possible?)Directly - no, there is no item to match with specific Tx queue.
If setting VLAN on specific Tx queue is desired we have two options:
- engage Tx offload
DEV_TX_OFFLOAD_VLAN_INSERT, and provide VLAN with each packet being transferred totx_burst- engage
DEV_TX_OFFLOAD_MATCH_METADATAfeature, and set specific metadata for all packets on specific queue. Then the rules matching with this metadata may be inserted.[snip]
With best regards, Slava
Hi, Hideyuki
Quoted 9 lines
-----Original Message-----
From: Hideyuki Yamashita <[email protected]>
Sent: Monday, October 21, 2019 10:12
To: Hideyuki Yamashita <[email protected]>
Cc: Slava Ovsiienko <[email protected]>; Moti Haimovsky <[email protected]>; [email protected]
Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on VLAN header
Quoted 6 lines
Dear Slava, Moti and all,
Please let me know if you need more information. Partial answer is acceptable for me.
Thanks in advaince!
I'm sorry for delay, your issue is still in progress.
I've tested your rules on my standard configuration - these ones are rejected by FW/SW, not by DPDK code. Moti tested the flows on custom setup (I suppose experimental FW/kernel). AFAIK, VLAN feature was planned to GA with OFED 4.7.1,
please, let me check it (hope in few days, there are holidays still lasting in IL).
With best regards, Slava
Quoted 138 lines
BR,
HIdeyuki Yamashita
NTT TechnoCrossQuoted 35 lines
Dear Slava and experts,
Thanks for your answering me.
Baased on your answer, I tested using testpmd.
And about the outcome, I have several questions.[1.Test environment]
OS:Ubuntu18.04
NIC1:MCX4121A-ACAT 25G
NIC2:MCX516A-CCAT 100G
Repo:dpdk-next-netI checked that the following is shown in git log command.
9f1e94469net/mlx5: fix netlink rdma socket callback routine50735012cnet/mlx5: support reading module EEPROM dataf53a5f917net/mlx5: support modify VLAN ID on existing VLAN header9af8046a1net/mlx5: support modify VLAN ID on new VLAN header43184603enet/mlx5: support modifying VLAN priority on VLAN header4f59ffbd8net/mlx5: support push flow action on VLAN headerb4bd8f5danet/mlx5: support pop flow action on VLAN header048e3e84cnet/mlx5:
add VLAN push/pop DR commands to glue[2.Test result]
I tested the follwoing flows with testpmd included in dpdk-next-net.A.flow create 0 ingress pattern eth / vlan id is 100 / end actions
OF_POP_VLAN/ end B.flow create 0 ingress pattern eth dst is BB:BB:BB:BB:BB:BB / end actionsOF_PUSH_VLANethertype 1000 / end C.flow create 0 ingress pattern eth dst is BB:BB:BB:BB:BB:BB / end actionsOF_SET_VLAN_VIDvlan_vid200 / end D.flow create X ingress pattern eth dst is BB:BB:BB:BB:BB:BB / end actionsof_SET_VLAN_PCPvlan_pcp3 / end E.flow create 0 egress pattern eth src is BB:BB:BB:BB:BB:BB / end actionsOF_PUSH_VLANethertype 1000 / endQuoted 1 line
A-D, resulted in "Caught error type 16 (specific action): cause:
0x7ffcc711db48, action not supported: Operation not supported".Quoted 5 lines
E resulted in "Egress is not supported".
[3. Quetions]
Q1. What is the appropriate flow to entag/detag VLAN using testpmd?
I think related commits are included so it "should" work and my guess isthat my flow is somehow wrong.
Quoted 1 line
Q2. Is it correct understanding that "egress" is not supported for mlx5
PMD?
Quoted 1 line
Q3. If yes, is it possible to entag VLAN tag to the outgoing packet from
physical NIC by using
rte_flow?Quoted 46 lines
BR,
Hideyuki Yamashita
NTT TechnoCrossQuoted 40 lines
Quoted 10 lines
-----Original Message-----
From: Hideyuki Yamashita <[email protected]>
Sent: Friday, October 4, 2019 13:35
To: Hideyuki Yamashita <[email protected]>
Cc: Moti Haimovsky <[email protected]>; Slava Ovsiienko <[email protected]>; [email protected]
Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on VLAN headerCan somebody (Mellanox guys?) help me out?
Hi, Hideyuki
I'm sorry, there are long holidays in IL, so let me try to answer.
Quoted 9 lines
Quoted 9 lines
Hello Moti,
I have some questions on the patch.
Just want to know how to use it.Q1. Is it correct understanding that the patch will be reflected in
19.11 if it is approved?Yes, it is merged and should be reflected.
Quoted 5 lines
Quoted 5 lines
Q2.Which action should I specify when I want to insert VLAN tag to non-VLAN frame?
OF_PUSH_VLANandOF_SET_VLAN_VIDandOF_SET_VLAN_PCP?All of them,
OF_PUSH_VLANinserts the VLAN header,OF_SET_VLAN_VIDandOF_SET_VLAN_PCPfill the fields with appropriate values.Quoted 3 lines
Quoted 3 lines
Q3. Is it possible to detag VLAN when it receives VLAN tagged frame from outside of the host?
Do you mean some complex configuration with multiple VMs and
engaged
Quoted 1 line
Quoted 1 line
E-Switch feature? Anyway, there are multiple ways to strip (untag) VLAN
header:
Quoted 5 lines
Quoted 5 lines
- with E-Switch rules (including match on specified port)
- with local port rules
- stripping VLAN in Rx queueQuoted 1 line
Quoted 1 line
Quoted 7 lines
Quoted 7 lines
Quoted 2 lines
Quoted 2 lines
Q4. Is it possible to entag VLAN to non-VLAN frame when it sends packet to outside of host?
Yes.
Quoted 2 lines
Quoted 2 lines
Q5.Are there any restriction to conbime other ACTIONS like QUEUE?
Should no be. Action QUEUE is on Rx NIC namespace, VLAN POP is
supported there.
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Q6. Is it possible to apply
rte_flowactions for specified tx queue of physical NIC?
(e.g. VM connect with PHY:0 using tx queue index:1, I want to entag VLAN 101 to the traffic from VM to PHY:0 is it possible?)Quoted 8 lines
Quoted 8 lines
Directly - no, there is no item to match with specific Tx queue.
If setting VLAN on specific Tx queue is desired we have two options:
- engage Tx offload
DEV_TX_OFFLOAD_VLAN_INSERT, and provide VLAN with each packet being transferred totx_burst- engage
DEV_TX_OFFLOAD_MATCH_METADATAfeature, and setspecific
Quoted 7 lines
Quoted 6 lines
metadata for all packets on specific queue. Then the rules matching with this metadata may be inserted.
[snip]
With best regards, Slava
Hello Slava,
Thanks for your response back.
While waiting your final response,
I am sending additional info from my side.
1
I am using "MLNX_OFED_LINUX-4.7-1.0.0.1-ubuntu18.04-x86_64" as OFED.
tx_h-yamashita@R730n10:~/dpdk-next-net$ pwd /home/tx_h-yamashita/dpdk-next-net tx_h-yamashita@R730n10:~/dpdk-next-net$ ls app MAINTAINERS buildtools Makefile config meson.build devtools meson_options.txt doc mk drivers MLNX_OFED_LINUX-4.7-1.0.0.1-ubuntu18.04-x86_64 examples MLNX_OFED_LINUX-4.7-1.0.0.1-ubuntu18.04-x86_64.tgz GNUmakefile README kernel usertools lib VERSION license x86_64-native-linuxapp-gcc
2.
I am using ConnextX-4 and ConnectX-5.
I attach the result of typing ethtool -i .
Bus info Device Class Description
==========================================================
pci@0000:03:00.0 enp3s0f0 network MT27710 Family [ConnectX-4 Lx] pci@0000:03:00.1 enp3s0f1 network MT27710 Family [ConnectX-4 Lx] pci@0000:04:00.0 enp4s0f0 network MT27800 Family [ConnectX-5] pci@0000:04:00.1 enp4s0f1 network MT27800 Family [ConnectX-5]
tx_h-yamashita@R730n10:~/dpdk-next-net$ ethtool -i enp3s0f0 driver: mlx5_core version: 4.7-1.0.0 firmware-version: 14.25.1020 (MT_0000000266) expansion-rom-version: bus-info: 0000:03:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: no supports-register-dump: no supports-priv-flags: yes tx_h-yamashita@R730n10:~/dpdk-next-net$ ethtool -i enp4s0f0 driver: mlx5_core version: 4.7-1.0.0 firmware-version: 16.25.6000 (MT_0000000012) expansion-rom-version: bus-info: 0000:04:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: no supports-register-dump: no supports-priv-flags: yes
If you needs more info from my side, please let me know.
BR,
Hideyuki Yamashita
NTT TechnoCross
Quoted 163 lines
Hi, Hideyuki
Quoted 9 lines
-----Original Message-----
From: Hideyuki Yamashita <[email protected]>
Sent: Monday, October 21, 2019 10:12
To: Hideyuki Yamashita <[email protected]>
Cc: Slava Ovsiienko <[email protected]>; Moti Haimovsky <[email protected]>; [email protected]
Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on VLAN headerQuoted 6 lines
Dear Slava, Moti and all,
Please let me know if you need more information. Partial answer is acceptable for me.
Thanks in advaince!
I'm sorry for delay, your issue is still in progress.
I've tested your rules on my standard configuration - these ones are rejected by FW/SW, not by DPDK code. Moti tested the flows on custom setup (I suppose experimental FW/kernel). AFAIK, VLAN feature was planned to GA with OFED 4.7.1,
please, let me check it (hope in few days, there are holidays still lasting in IL).With best regards, Slava
Quoted 138 lines
BR,
HIdeyuki Yamashita
NTT TechnoCrossQuoted 35 lines
Dear Slava and experts,
Thanks for your answering me.
Baased on your answer, I tested using testpmd.
And about the outcome, I have several questions.[1.Test environment]
OS:Ubuntu18.04
NIC1:MCX4121A-ACAT 25G
NIC2:MCX516A-CCAT 100G
Repo:dpdk-next-netI checked that the following is shown in git log command.
9f1e94469net/mlx5: fix netlink rdma socket callback routine50735012cnet/mlx5: support reading module EEPROM dataf53a5f917net/mlx5: support modify VLAN ID on existing VLAN header9af8046a1net/mlx5: support modify VLAN ID on new VLAN header43184603enet/mlx5: support modifying VLAN priority on VLAN header4f59ffbd8net/mlx5: support push flow action on VLAN headerb4bd8f5danet/mlx5: support pop flow action on VLAN header048e3e84cnet/mlx5:
add VLAN push/pop DR commands to glue[2.Test result]
I tested the follwoing flows with testpmd included in dpdk-next-net.A.flow create 0 ingress pattern eth / vlan id is 100 / end actions
OF_POP_VLAN/ end B.flow create 0 ingress pattern eth dst is BB:BB:BB:BB:BB:BB / end actionsOF_PUSH_VLANethertype 1000 / end C.flow create 0 ingress pattern eth dst is BB:BB:BB:BB:BB:BB / end actionsOF_SET_VLAN_VIDvlan_vid200 / end D.flow create X ingress pattern eth dst is BB:BB:BB:BB:BB:BB / end actionsof_SET_VLAN_PCPvlan_pcp3 / end E.flow create 0 egress pattern eth src is BB:BB:BB:BB:BB:BB / end actionsOF_PUSH_VLANethertype 1000 / endQuoted 1 line
A-D, resulted in "Caught error type 16 (specific action): cause:
0x7ffcc711db48, action not supported: Operation not supported".Quoted 5 lines
E resulted in "Egress is not supported".
[3. Quetions]
Q1. What is the appropriate flow to entag/detag VLAN using testpmd?
I think related commits are included so it "should" work and my guess isthat my flow is somehow wrong.
Quoted 1 line
Q2. Is it correct understanding that "egress" is not supported for mlx5
PMD?
Quoted 1 line
Q3. If yes, is it possible to entag VLAN tag to the outgoing packet from
physical NIC by using
rte_flow?Quoted 46 lines
BR,
Hideyuki Yamashita
NTT TechnoCrossQuoted 40 lines
Quoted 10 lines
-----Original Message-----
From: Hideyuki Yamashita <[email protected]>
Sent: Friday, October 4, 2019 13:35
To: Hideyuki Yamashita <[email protected]>
Cc: Moti Haimovsky <[email protected]>; Slava Ovsiienko <[email protected]>; [email protected]
Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on VLAN headerCan somebody (Mellanox guys?) help me out?
Hi, Hideyuki
I'm sorry, there are long holidays in IL, so let me try to answer.
Quoted 9 lines
Quoted 9 lines
Hello Moti,
I have some questions on the patch.
Just want to know how to use it.Q1. Is it correct understanding that the patch will be reflected in
19.11 if it is approved?Yes, it is merged and should be reflected.
Quoted 5 lines
Quoted 5 lines
Q2.Which action should I specify when I want to insert VLAN tag to non-VLAN frame?
OF_PUSH_VLANandOF_SET_VLAN_VIDandOF_SET_VLAN_PCP?All of them,
OF_PUSH_VLANinserts the VLAN header,OF_SET_VLAN_VIDandOF_SET_VLAN_PCPfill the fields with appropriate values.Quoted 3 lines
Quoted 3 lines
Q3. Is it possible to detag VLAN when it receives VLAN tagged frame from outside of the host?
Do you mean some complex configuration with multiple VMs and
engaged
Quoted 1 line
Quoted 1 line
E-Switch feature? Anyway, there are multiple ways to strip (untag) VLAN
header:
Quoted 5 lines
Quoted 5 lines
- with E-Switch rules (including match on specified port)
- with local port rules
- stripping VLAN in Rx queueQuoted 1 line
Quoted 1 line
Quoted 7 lines
Quoted 7 lines
Quoted 2 lines
Quoted 2 lines
Q4. Is it possible to entag VLAN to non-VLAN frame when it sends packet to outside of host?
Yes.
Quoted 2 lines
Quoted 2 lines
Q5.Are there any restriction to conbime other ACTIONS like QUEUE?
Should no be. Action QUEUE is on Rx NIC namespace, VLAN POP is
supported there.
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Q6. Is it possible to apply
rte_flowactions for specified tx queue of physical NIC?
(e.g. VM connect with PHY:0 using tx queue index:1, I want to entag VLAN 101 to the traffic from VM to PHY:0 is it possible?)Quoted 8 lines
Quoted 8 lines
Directly - no, there is no item to match with specific Tx queue.
If setting VLAN on specific Tx queue is desired we have two options:
- engage Tx offload
DEV_TX_OFFLOAD_VLAN_INSERT, and provide VLAN with each packet being transferred totx_burst- engage
DEV_TX_OFFLOAD_MATCH_METADATAfeature, and setspecific
Quoted 7 lines
Quoted 6 lines
metadata for all packets on specific queue. Then the rules matching with this metadata may be inserted.
[snip]
With best regards, Slava
Hi, Hideyuki.
Thanks for providing extra information.
We rechecked the VLAN actions support in OFED 4.7.1, it should be supported. There are some limitations:
- VLAN pop is supported on ingress direction only
- VLAN push is supported on egress direction only
- not supported in group 0 (this is root table, has some limitations) we should insert into group 0 flow with jump to group 1, and then insert
the rule with VLAN actions to group 1
I tried this flow (on my setup OFED 4.7.1.0.0.2):
flow create 0 ingress group 1 priority 0 pattern eth dst is 00:16:3e:2e:7b:6a / vlan vid is 1480 / end actions of_pop_vlan / queue index 0 / end It was created successfully.
With best regards, Slava
Quoted 252 lines
-----Original Message-----
From: Hideyuki Yamashita <[email protected]>
Sent: Friday, October 25, 2019 7:49
To: Slava Ovsiienko <[email protected]>
Cc: Moti Haimovsky <[email protected]>; [email protected]
Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on VLAN headerHello Slava,
Thanks for your response back.
While waiting your final response,
I am sending additional info from my side.1
I am using "MLNX_OFED_LINUX-4.7-1.0.0.1-ubuntu18.04-x86_64" as OFED.tx_h-yamashita@R730n10:~/dpdk-next-net$ pwd /home/tx_h- yamashita/dpdk-next-net tx_h-yamashita@R730n10:~/dpdk-next-net$ ls app MAINTAINERS buildtools Makefile config meson.build devtools meson_options.txt doc mk drivers MLNX_OFED_LINUX-4.7-1.0.0.1-ubuntu18.04-x86_64 examples MLNX_OFED_LINUX-4.7-1.0.0.1-ubuntu18.04-x86_64.tgz GNUmakefile README kernel usertools lib VERSION license x86_64-native-linuxapp-gcc2.
I am using ConnextX-4 and ConnectX-5.
I attach the result of typing ethtool -i .Bus info Device Class Description
==========================================================
pci@0000:03:00.0 enp3s0f0 network MT27710 Family [ConnectX-4
Lx]
pci@0000:03:00.1 enp3s0f1 network MT27710 Family [ConnectX-4
Lx]pci@0000:04:00.0 enp4s0f0 network MT27800 Family [ConnectX-5] pci@0000:04:00.1 enp4s0f1 network MT27800 Family [ConnectX-5]tx_h-yamashita@R730n10:~/dpdk-next-net$ ethtool -i enp3s0f0 driver: mlx5_core version: 4.7-1.0.0 firmware-version: 14.25.1020 (MT_0000000266) expansion-rom-version: bus-info: 0000:03:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: no supports-register-dump: no supports-priv-flags: yes tx_h-yamashita@R730n10:~/dpdk-next-net$ ethtool -i enp4s0f0 driver: mlx5_core version: 4.7-1.0.0 firmware-version: 16.25.6000 (MT_0000000012) expansion-rom-version: bus-info: 0000:04:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: no supports-register-dump: no supports-priv-flags: yesIf you needs more info from my side, please let me know.
BR,
Hideyuki Yamashita
NTT TechnoCrossQuoted 13 lines
Hi, Hideyuki
Quoted 11 lines
-----Original Message-----
From: Hideyuki Yamashita <[email protected]>
Sent: Monday, October 21, 2019 10:12
To: Hideyuki Yamashita <[email protected]>
Cc: Slava Ovsiienko <[email protected]>; Moti Haimovsky <[email protected]>; [email protected]
Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on VLAN headerDear Slava, Moti and all,
Quoted 8 lines
Quoted 4 lines
Please let me know if you need more information.
Partial answer is acceptable for me.Thanks in advaince!
I'm sorry for delay, your issue is still in progress. I've tested your rules on my standard configuration - these ones are rejected by FW/SW, not by DPDK code. Moti tested the flows on custom
setup (I suppose experimental FW/kernel).
Quoted 32 lines
AFAIK, VLAN feature was planned to GA with OFED 4.7.1, please, let me check it (hope in few days, there are holidays still lasting in IL).
With best regards, Slava
Quoted 28 lines
BR,
HIdeyuki Yamashita
NTT TechnoCrossQuoted 23 lines
Dear Slava and experts,
Thanks for your answering me.
Baased on your answer, I tested using testpmd.
And about the outcome, I have several questions.[1.Test environment]
OS:Ubuntu18.04
NIC1:MCX4121A-ACAT 25G
NIC2:MCX516A-CCAT 100G
Repo:dpdk-next-netI checked that the following is shown in git log command.
9f1e94469net/mlx5: fix netlink rdma socket callback routine50735012c
net/mlx5: support reading module EEPROM dataf53a5f917net/mlx5: support modify VLAN ID on existing VLAN header9af8046a1net/mlx5: support modify VLAN ID on new VLAN header43184603enet/mlx5: support modifying VLAN priority on VLAN header4f59ffbd8net/mlx5: support push flow action on VLAN headerb4bd8f5da
net/mlx5: support pop flow action on VLAN header048e3e84cnet/mlx5:
Quoted 63 lines
Quoted 63 lines
Quoted 14 lines
add VLAN push/pop DR commands to glue
[2.Test result]
I tested the follwoing flows with testpmd included in dpdk-next-net.A.flow create 0 ingress pattern eth / vlan id is 100 / end actions
OF_POP_VLAN/ end B.flow create 0 ingress pattern eth dst is BB:BB:BB:BB:BB:BB / end actionsOF_PUSH_VLANethertype 1000 / end C.flow create 0 ingress pattern eth dst is BB:BB:BB:BB:BB:BB / end actionsOF_SET_VLAN_VIDvlan_vid200 / end D.flow create X ingress pattern eth dst is BB:BB:BB:BB:BB:BB / end actionsof_SET_VLAN_PCPvlan_pcp3 / end E.flow create 0 egress pattern eth src is BB:BB:BB:BB:BB:BB / end actionsOF_PUSH_VLANethertype 1000 / endQuoted 1 line
A-D, resulted in "Caught error type 16 (specific action): cause:
0x7ffcc711db48, action not supported: Operation not supported".Quoted 6 lines
E resulted in "Egress is not supported".
[3. Quetions]
Q1. What is the appropriate flow to entag/detag VLAN using testpmd?
I think related commits are included so it "should" work and my
guess isthat my flow is somehow wrong.
Quoted 2 lines
Q2. Is it correct understanding that "egress" is not supported for mlx5
PMD?
Quoted 2 lines
Q3. If yes, is it possible to entag VLAN tag to the outgoing packet from
physical NIC by using
rte_flow?Quoted 34 lines
BR,
Hideyuki Yamashita
NTT TechnoCrossQuoted 28 lines
Quoted 10 lines
-----Original Message-----
From: Hideyuki Yamashita <[email protected]>
Sent: Friday, October 4, 2019 13:35
To: Hideyuki Yamashita <[email protected]>
Cc: Moti Haimovsky <[email protected]>; Slava Ovsiienko <[email protected]>; [email protected]
Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on VLAN headerCan somebody (Mellanox guys?) help me out?
Hi, Hideyuki
I'm sorry, there are long holidays in IL, so let me try to answer.
Quoted 9 lines
Quoted 9 lines
Hello Moti,
I have some questions on the patch.
Just want to know how to use it.Q1. Is it correct understanding that the patch will be reflected in
19.11 if it is approved?Yes, it is merged and should be reflected.
Quoted 1 line
Quoted 1 line
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 4 lines
Quoted 4 lines
Q2.Which action should I specify when I want to insert VLAN tag to non-VLAN frame?
OF_PUSH_VLANandOF_SET_VLAN_VIDandOF_SET_VLAN_PCP?All of them,
OF_PUSH_VLANinserts the VLAN header,OF_SET_VLAN_VIDandOF_SET_VLAN_PCPfill the fields withappropriate values.
Quoted 14 lines
Quoted 14 lines
Quoted 5 lines
Quoted 5 lines
Quoted 4 lines
Quoted 4 lines
Q3. Is it possible to detag VLAN when it receives VLAN tagged frame from outside of the host?
Do you mean some complex configuration with multiple VMs and
engaged
Quoted 2 lines
Quoted 2 lines
E-Switch feature? Anyway, there are multiple ways to strip (untag) VLAN
header:
Quoted 5 lines
Quoted 5 lines
- with E-Switch rules (including match on specified port)
- with local port rules
- stripping VLAN in Rx queueQuoted 1 line
Quoted 1 line
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 2 lines
Quoted 2 lines
Q4. Is it possible to entag VLAN to non-VLAN frame when it sends packet to outside of host?
Yes.
Quoted 2 lines
Quoted 2 lines
Q5.Are there any restriction to conbime other ACTIONS like
QUEUE?
Quoted 9 lines
Quoted 9 lines
Quoted 1 line
Quoted 1 line
Should no be. Action QUEUE is on Rx NIC namespace, VLAN POP is
supported there.
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Q6. Is it possible to apply
rte_flowactions for specified tx queue of physical NIC?
(e.g. VM connect with PHY:0 using tx queue index:1, I want to entag VLAN 101 to the traffic from VM to PHY:0 is it possible?)Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Directly - no, there is no item to match with specific Tx queue.
If setting VLAN on specific Tx queue is desired we have two options:
- engage Tx offload
DEV_TX_OFFLOAD_VLAN_INSERT, and provideVLAN
Quoted 13 lines
Quoted 13 lines
Quoted 3 lines
Quoted 3 lines
with each packet being transferred to
tx_burst- engage
DEV_TX_OFFLOAD_MATCH_METADATAfeature, and setspecific
Quoted 7 lines
Quoted 6 lines
metadata for all packets on specific queue. Then the rules matching with this metadata may be inserted.
[snip]
With best regards, Slava
Hi Slava,
Thanks for your response back and letting me know the limitation.
I tried to input flow you suggested.
But it returns error.
testpmd> flow create 0 ingress group 1 priority 0 pattern eth dst is 00:16:3e:2e:7b:6a / vlan vid is 1480 / end actions of_pop_vlan / queue index 0 / end Caught error type 3 (group field): groups is not supported: Operation not supported
Note that my setup OFED is NOT 4.7.1.0.0.2, but 4.7.1.0.0.1 because that is the latest version which I can download from the following web site.
https://jp.mellanox.com/page/products_dyn?product_family=26&ssn=u44h3rn8ngcmbdl6v0fvhqrgt3
Do you have any hints?
BR,
Hideyuki Yamashita
NTT TechnoCross
Quoted 272 lines
Hi, Hideyuki.
Thanks for providing extra information.
We rechecked the VLAN actions support in OFED 4.7.1, it should be supported. There are some limitations:
- VLAN pop is supported on ingress direction only
- VLAN push is supported on egress direction only
- not supported in group 0 (this is root table, has some limitations) we should insert into group 0 flow with jump to group 1, and then insert
the rule with VLAN actions to group 1I tried this flow (on my setup OFED 4.7.1.0.0.2):
flow create 0 ingress group 1 priority 0 pattern eth dst is 00:16:3e:2e:7b:6a / vlan vid is 1480 / end actions
of_pop_vlan/ queue index 0 / end It was created successfully.With best regards, Slava
Quoted 252 lines
-----Original Message-----
From: Hideyuki Yamashita <[email protected]>
Sent: Friday, October 25, 2019 7:49
To: Slava Ovsiienko <[email protected]>
Cc: Moti Haimovsky <[email protected]>; [email protected]
Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on VLAN headerHello Slava,
Thanks for your response back.
While waiting your final response,
I am sending additional info from my side.1
I am using "MLNX_OFED_LINUX-4.7-1.0.0.1-ubuntu18.04-x86_64" as OFED.tx_h-yamashita@R730n10:~/dpdk-next-net$ pwd /home/tx_h- yamashita/dpdk-next-net tx_h-yamashita@R730n10:~/dpdk-next-net$ ls app MAINTAINERS buildtools Makefile config meson.build devtools meson_options.txt doc mk drivers MLNX_OFED_LINUX-4.7-1.0.0.1-ubuntu18.04-x86_64 examples MLNX_OFED_LINUX-4.7-1.0.0.1-ubuntu18.04-x86_64.tgz GNUmakefile README kernel usertools lib VERSION license x86_64-native-linuxapp-gcc2.
I am using ConnextX-4 and ConnectX-5.
I attach the result of typing ethtool -i .Bus info Device Class Description
==========================================================
pci@0000:03:00.0 enp3s0f0 network MT27710 Family [ConnectX-4
Lx]
pci@0000:03:00.1 enp3s0f1 network MT27710 Family [ConnectX-4
Lx]pci@0000:04:00.0 enp4s0f0 network MT27800 Family [ConnectX-5] pci@0000:04:00.1 enp4s0f1 network MT27800 Family [ConnectX-5]tx_h-yamashita@R730n10:~/dpdk-next-net$ ethtool -i enp3s0f0 driver: mlx5_core version: 4.7-1.0.0 firmware-version: 14.25.1020 (MT_0000000266) expansion-rom-version: bus-info: 0000:03:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: no supports-register-dump: no supports-priv-flags: yes tx_h-yamashita@R730n10:~/dpdk-next-net$ ethtool -i enp4s0f0 driver: mlx5_core version: 4.7-1.0.0 firmware-version: 16.25.6000 (MT_0000000012) expansion-rom-version: bus-info: 0000:04:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: no supports-register-dump: no supports-priv-flags: yesIf you needs more info from my side, please let me know.
BR,
Hideyuki Yamashita
NTT TechnoCrossQuoted 13 lines
Hi, Hideyuki
Quoted 11 lines
-----Original Message-----
From: Hideyuki Yamashita <[email protected]>
Sent: Monday, October 21, 2019 10:12
To: Hideyuki Yamashita <[email protected]>
Cc: Slava Ovsiienko <[email protected]>; Moti Haimovsky <[email protected]>; [email protected]
Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on VLAN headerDear Slava, Moti and all,
Quoted 8 lines
Quoted 4 lines
Please let me know if you need more information.
Partial answer is acceptable for me.Thanks in advaince!
I'm sorry for delay, your issue is still in progress. I've tested your rules on my standard configuration - these ones are rejected by FW/SW, not by DPDK code. Moti tested the flows on custom
setup (I suppose experimental FW/kernel).
Quoted 32 lines
AFAIK, VLAN feature was planned to GA with OFED 4.7.1, please, let me check it (hope in few days, there are holidays still lasting in IL).
With best regards, Slava
Quoted 28 lines
BR,
HIdeyuki Yamashita
NTT TechnoCrossQuoted 23 lines
Dear Slava and experts,
Thanks for your answering me.
Baased on your answer, I tested using testpmd.
And about the outcome, I have several questions.[1.Test environment]
OS:Ubuntu18.04
NIC1:MCX4121A-ACAT 25G
NIC2:MCX516A-CCAT 100G
Repo:dpdk-next-netI checked that the following is shown in git log command.
9f1e94469net/mlx5: fix netlink rdma socket callback routine50735012c
net/mlx5: support reading module EEPROM dataf53a5f917net/mlx5: support modify VLAN ID on existing VLAN header9af8046a1net/mlx5: support modify VLAN ID on new VLAN header43184603enet/mlx5: support modifying VLAN priority on VLAN header4f59ffbd8net/mlx5: support push flow action on VLAN headerb4bd8f5da
net/mlx5: support pop flow action on VLAN header048e3e84cnet/mlx5:
Quoted 63 lines
Quoted 63 lines
Quoted 14 lines
add VLAN push/pop DR commands to glue
[2.Test result]
I tested the follwoing flows with testpmd included in dpdk-next-net.A.flow create 0 ingress pattern eth / vlan id is 100 / end actions
OF_POP_VLAN/ end B.flow create 0 ingress pattern eth dst is BB:BB:BB:BB:BB:BB / end actionsOF_PUSH_VLANethertype 1000 / end C.flow create 0 ingress pattern eth dst is BB:BB:BB:BB:BB:BB / end actionsOF_SET_VLAN_VIDvlan_vid200 / end D.flow create X ingress pattern eth dst is BB:BB:BB:BB:BB:BB / end actionsof_SET_VLAN_PCPvlan_pcp3 / end E.flow create 0 egress pattern eth src is BB:BB:BB:BB:BB:BB / end actionsOF_PUSH_VLANethertype 1000 / endQuoted 1 line
A-D, resulted in "Caught error type 16 (specific action): cause:
0x7ffcc711db48, action not supported: Operation not supported".Quoted 6 lines
E resulted in "Egress is not supported".
[3. Quetions]
Q1. What is the appropriate flow to entag/detag VLAN using testpmd?
I think related commits are included so it "should" work and my
guess isthat my flow is somehow wrong.
Quoted 2 lines
Q2. Is it correct understanding that "egress" is not supported for mlx5
PMD?
Quoted 2 lines
Q3. If yes, is it possible to entag VLAN tag to the outgoing packet from
physical NIC by using
rte_flow?Quoted 34 lines
BR,
Hideyuki Yamashita
NTT TechnoCrossQuoted 28 lines
Quoted 10 lines
-----Original Message-----
From: Hideyuki Yamashita <[email protected]>
Sent: Friday, October 4, 2019 13:35
To: Hideyuki Yamashita <[email protected]>
Cc: Moti Haimovsky <[email protected]>; Slava Ovsiienko <[email protected]>; [email protected]
Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on VLAN headerCan somebody (Mellanox guys?) help me out?
Hi, Hideyuki
I'm sorry, there are long holidays in IL, so let me try to answer.
Quoted 9 lines
Quoted 9 lines
Hello Moti,
I have some questions on the patch.
Just want to know how to use it.Q1. Is it correct understanding that the patch will be reflected in
19.11 if it is approved?Yes, it is merged and should be reflected.
Quoted 1 line
Quoted 1 line
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 4 lines
Quoted 4 lines
Q2.Which action should I specify when I want to insert VLAN tag to non-VLAN frame?
OF_PUSH_VLANandOF_SET_VLAN_VIDandOF_SET_VLAN_PCP?All of them,
OF_PUSH_VLANinserts the VLAN header,OF_SET_VLAN_VIDandOF_SET_VLAN_PCPfill the fields withappropriate values.
Quoted 14 lines
Quoted 14 lines
Quoted 5 lines
Quoted 5 lines
Quoted 4 lines
Quoted 4 lines
Q3. Is it possible to detag VLAN when it receives VLAN tagged frame from outside of the host?
Do you mean some complex configuration with multiple VMs and
engaged
Quoted 2 lines
Quoted 2 lines
E-Switch feature? Anyway, there are multiple ways to strip (untag) VLAN
header:
Quoted 5 lines
Quoted 5 lines
- with E-Switch rules (including match on specified port)
- with local port rules
- stripping VLAN in Rx queueQuoted 1 line
Quoted 1 line
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 2 lines
Quoted 2 lines
Q4. Is it possible to entag VLAN to non-VLAN frame when it sends packet to outside of host?
Yes.
Quoted 2 lines
Quoted 2 lines
Q5.Are there any restriction to conbime other ACTIONS like
QUEUE?
Quoted 9 lines
Quoted 9 lines
Quoted 1 line
Quoted 1 line
Should no be. Action QUEUE is on Rx NIC namespace, VLAN POP is
supported there.
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Q6. Is it possible to apply
rte_flowactions for specified tx queue of physical NIC?
(e.g. VM connect with PHY:0 using tx queue index:1, I want to entag VLAN 101 to the traffic from VM to PHY:0 is it possible?)Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Directly - no, there is no item to match with specific Tx queue.
If setting VLAN on specific Tx queue is desired we have two options:
- engage Tx offload
DEV_TX_OFFLOAD_VLAN_INSERT, and provideVLAN
Quoted 13 lines
Quoted 13 lines
Quoted 3 lines
Quoted 3 lines
with each packet being transferred to
tx_burst- engage
DEV_TX_OFFLOAD_MATCH_METADATAfeature, and setspecific
Quoted 7 lines
Quoted 6 lines
metadata for all packets on specific queue. Then the rules matching with this metadata may be inserted.
[snip]
With best regards, Slava
Hi, Hideyuki
Quoted 8 lines
-----Original Message-----
From: Hideyuki Yamashita <[email protected]>
Sent: Wednesday, October 30, 2019 12:05
To: Slava Ovsiienko <[email protected]>
Cc: Moti Haimovsky <[email protected]>; [email protected]
Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on VLAN header
Quoted 6 lines
Hi Slava,
Thanks for your response back and letting me know the limitation.
I tried to input flow you suggested.
But it returns error.
Did you specify the magic "dv_flow_en=1" devarg in testpmd command line? Something like this: "-w 82:00.0,dv_flow_en=1"
With best regards, Slava
Quoted 311 lines
testpmd> flow create 0 ingress group 1 priority 0 pattern eth dst is testpmd> 00:16:3e:2e:7b:6a / vlan vid is 1480 / end actions
of_pop_vlantestpmd> / queue index 0 / end
Caught error type 3 (group field): groups is not supported: Operation not supportedNote that my setup OFED is NOT 4.7.1.0.0.2, but 4.7.1.0.0.1 because that is the latest version which I can download from the following web site.
https://jp.mellanox.com/page/products_dyn?product_family=26&ssn=u44h3
rn8ngcmbdl6v0fvhqrgt3Do you have any hints?
BR,
Hideyuki Yamashita
NTT TechnoCrossQuoted 5 lines
Hi, Hideyuki.
Thanks for providing extra information.
We rechecked the VLAN actions support in OFED 4.7.1, it should be
supported.
Quoted 11 lines
There are some limitations:
- VLAN pop is supported on ingress direction only
- VLAN push is supported on egress direction only
- not supported in group 0 (this is root table, has some limitations) we should insert into group 0 flow with jump to group 1, and then insert the rule with VLAN actions to group 1I tried this flow (on my setup OFED 4.7.1.0.0.2):
flow create 0 ingress group 1 priority 0 pattern eth dst is 00:16:3e:2e:7b:6a / vlan vid is 1480 / end actions
of_pop_vlan/ queueindex 0 / end It was created successfully.
Quoted 43 lines
With best regards, Slava
Quoted 40 lines
-----Original Message-----
From: Hideyuki Yamashita <[email protected]>
Sent: Friday, October 25, 2019 7:49
To: Slava Ovsiienko <[email protected]>
Cc: Moti Haimovsky <[email protected]>; [email protected]
Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on VLAN headerHello Slava,
Thanks for your response back.
While waiting your final response,
I am sending additional info from my side.1
I am using "MLNX_OFED_LINUX-4.7-1.0.0.1-ubuntu18.04-x86_64" as OFED.tx_h-yamashita@R730n10:~/dpdk-next-net$ pwd /home/tx_h- yamashita/dpdk-next-net tx_h-yamashita@R730n10:~/dpdk-next-net$ ls app MAINTAINERS buildtools Makefile config meson.build devtools meson_options.txt doc mk drivers MLNX_OFED_LINUX-4.7-1.0.0.1-ubuntu18.04-x86_64 examples MLNX_OFED_LINUX-4.7-1.0.0.1-ubuntu18.04-x86_64.tgz GNUmakefile README kernel usertools lib VERSION license x86_64-native-linuxapp-gcc2.
I am using ConnextX-4 and ConnectX-5.
I attach the result of typing ethtool -i .Bus info Device Class Description
==========================================================
pci@0000:03:00.0 enp3s0f0 network MT27710 Family [ConnectX-4
Quoted 2 lines
Quoted 2 lines
Lx]
pci@0000:03:00.1 enp3s0f1 network MT27710 Family [ConnectX-4
Quoted 2 lines
Quoted 2 lines
Lx]
pci@0000:04:00.0 enp4s0f0 network MT27800 Family [ConnectX-5]
Quoted 1 line
Quoted 1 line
pci@0000:04:00.1 enp4s0f1 network MT27800 Family [ConnectX-
5]
Quoted 104 lines
Quoted 104 lines
tx_h-yamashita@R730n10:~/dpdk-next-net$ ethtool -i enp3s0f0 driver: mlx5_core version: 4.7-1.0.0 firmware-version: 14.25.1020 (MT_0000000266) expansion-rom-version: bus-info: 0000:03:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: no supports-register-dump: no supports-priv-flags: yes tx_h-yamashita@R730n10:~/dpdk-next-net$ ethtool -i enp4s0f0 driver: mlx5_core version: 4.7-1.0.0 firmware-version: 16.25.6000 (MT_0000000012) expansion-rom-version: bus-info: 0000:04:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: no supports-register-dump: no supports-priv-flags: yesIf you needs more info from my side, please let me know.
BR,
Hideyuki Yamashita
NTT TechnoCrossQuoted 16 lines
Hi, Hideyuki
Quoted 14 lines
-----Original Message-----
From: Hideyuki Yamashita <[email protected]>
Sent: Monday, October 21, 2019 10:12
To: Hideyuki Yamashita <[email protected]>
Cc: Slava Ovsiienko <[email protected]>; Moti Haimovsky <[email protected]>; [email protected]
Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on VLAN headerDear Slava, Moti and all,
Please let me know if you need more information.
Partial answer is acceptable for me.Quoted 6 lines
Quoted 1 line
Thanks in advaince!
I'm sorry for delay, your issue is still in progress. I've tested your rules on my standard configuration - these ones are rejected by FW/SW, not by DPDK code. Moti tested the flows on custom
setup (I suppose experimental FW/kernel).
Quoted 34 lines
AFAIK, VLAN feature was planned to GA with OFED 4.7.1, please, let me check it (hope in few days, there are holidays still lasting in IL).
With best regards, Slava
Quoted 30 lines
BR,
HIdeyuki Yamashita
NTT TechnoCrossQuoted 25 lines
Dear Slava and experts,
Thanks for your answering me.
Baased on your answer, I tested using testpmd.
And about the outcome, I have several questions.[1.Test environment]
OS:Ubuntu18.04
NIC1:MCX4121A-ACAT 25G
NIC2:MCX516A-CCAT 100G
Repo:dpdk-next-netI checked that the following is shown in git log command.
9f1e94469net/mlx5: fix netlink rdma socket callback routine50735012c
net/mlx5: support reading module EEPROM dataf53a5f917net/mlx5: support modify VLAN ID on existing VLAN header9af8046a1net/mlx5: support modify VLAN ID on new VLAN header43184603enet/mlx5: support modifying VLAN priority on VLAN header4f59ffbd8net/mlx5: support push flow action on VLAN headerb4bd8f5da
net/mlx5: support pop flow action on VLAN header048e3e84cnet/mlx5:
Quoted 16 lines
Quoted 16 lines
Quoted 16 lines
add VLAN push/pop DR commands to glue
[2.Test result]
I tested the follwoing flows with testpmd included in dpdk-next-net.A.flow create 0 ingress pattern eth / vlan id is 100 / end actions
OF_POP_VLAN/ end B.flow create 0 ingress pattern eth dst is BB:BB:BB:BB:BB:BB / end actionsOF_PUSH_VLANethertype 1000 / end C.flow create 0 ingress pattern eth dst is BB:BB:BB:BB:BB:BB / end actionsOF_SET_VLAN_VIDvlan_vid200 / end D.flow create X ingress pattern eth dst is BB:BB:BB:BB:BB:BB / end actionsof_SET_VLAN_PCPvlan_pcp3 / end E.flow create 0 egress pattern eth src is BB:BB:BB:BB:BB:BB / end actionsOF_PUSH_VLANethertype 1000 / endQuoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 1 line
A-D, resulted in "Caught error type 16 (specific action): cause:
0x7ffcc711db48, action not supported: Operation not supported".Quoted 4 lines
E resulted in "Egress is not supported".
[3. Quetions]
Q1. What is the appropriate flow to entag/detag VLAN usingtestpmd?
Quoted 41 lines
Quoted 41 lines
Quoted 41 lines
Quoted 41 lines
Quoted 2 lines
I think related commits are included so it "should" work and
my guess isthat my flow is somehow wrong.
Quoted 3 lines
Q2. Is it correct understanding that "egress" is not supported for
mlx5PMD?
Quoted 2 lines
Q3. If yes, is it possible to entag VLAN tag to the outgoing packet from
physical NIC by using
rte_flow?Quoted 31 lines
BR,
Hideyuki Yamashita
NTT TechnoCrossQuoted 25 lines
Quoted 10 lines
-----Original Message-----
From: Hideyuki Yamashita <[email protected]>
Sent: Friday, October 4, 2019 13:35
To: Hideyuki Yamashita <[email protected]>
Cc: Moti Haimovsky <[email protected]>; Slava Ovsiienko <[email protected]>; [email protected]
Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on VLAN headerCan somebody (Mellanox guys?) help me out?
Hi, Hideyuki
I'm sorry, there are long holidays in IL, so let me try to answer.
Quoted 9 lines
Quoted 9 lines
Hello Moti,
I have some questions on the patch.
Just want to know how to use it.Q1. Is it correct understanding that the patch will be reflected in
19.11 if it is approved?Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Yes, it is merged and should be reflected.
Quoted 5 lines
Quoted 5 lines
Q2.Which action should I specify when I want to insert VLAN tag to non-VLAN frame?
OF_PUSH_VLANandOF_SET_VLAN_VIDand
OF_SET_VLAN_PCP?Quoted 37 lines
Quoted 37 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
All of them,
OF_PUSH_VLANinserts the VLAN header,OF_SET_VLAN_VIDandOF_SET_VLAN_PCPfill the fields withappropriate values.
Quoted 14 lines
Quoted 14 lines
Quoted 5 lines
Quoted 5 lines
Quoted 4 lines
Quoted 4 lines
Q3. Is it possible to detag VLAN when it receives VLAN tagged frame from outside of the host?
Do you mean some complex configuration with multiple VMs and
engaged
Quoted 2 lines
Quoted 2 lines
E-Switch feature? Anyway, there are multiple ways to strip (untag) VLAN
header:
Quoted 5 lines
Quoted 5 lines
- with E-Switch rules (including match on specified port)
- with local port rules
- stripping VLAN in Rx queueQuoted 1 line
Quoted 1 line
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 2 lines
Quoted 2 lines
Q4. Is it possible to entag VLAN to non-VLAN frame when it sends packet to outside of host?
Yes.
Quoted 3 lines
Quoted 3 lines
Q5.Are there any restriction to conbime other ACTIONS like
QUEUE?
Quoted 11 lines
Quoted 11 lines
Quoted 2 lines
Quoted 2 lines
Should no be. Action QUEUE is on Rx NIC namespace, VLAN POP is
supported there.
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Q6. Is it possible to apply
rte_flowactions for specified tx queue of physical NIC?
(e.g. VM connect with PHY:0 using tx queue index:1, I want to entag VLAN 101 to the traffic from VM to PHY:0 is it
possible?)Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Directly - no, there is no item to match with specific Tx queue.
If setting VLAN on specific Tx queue is desired we have two
options:
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
- engage Tx offload
DEV_TX_OFFLOAD_VLAN_INSERT, andprovide
Quoted 16 lines
Quoted 15 lines
VLAN
Quoted 13 lines
Quoted 13 lines
Quoted 3 lines
Quoted 3 lines
with each packet being transferred to
tx_burst- engage
DEV_TX_OFFLOAD_MATCH_METADATAfeature, and setspecific
Quoted 7 lines
Quoted 6 lines
metadata for all packets on specific queue. Then the rules matching with this metadata may be inserted.
[snip]
With best regards, Slava
Hello Slava,
Thanks for your help.
I added magic phrase. with chaging PCI number with proper one in my env. It changes situation but still result in error.
I used /usertools/dpdk-setup.sh to allocate hugepage dynamically. Your help is appreciated.
I think it is getting closer.
tx_h-yamashita@R730n10:~/dpdk-next-net/x86_64-native-linuxapp-gcc/app$ sudo ./testpmd -c 0xF -n 4 -w 03:00.0,dv_flow_en=1 --socket-mem 512,512 --huge-dir=/mnt/h
uge1G --log-level port:8 -- -i --portmask=0x1 --nb-cores=2 --txq=16 --rxq=16
EAL: Detected 48 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: Probing VFIO support...
EAL: PCI device 0000:03:00.0 on NUMA socket 0
EAL: probe driver: 15b3:1015 net_mlx5net_mlx5: mlx5.c:1852: mlx5_dev_spawn(): can't query devx port 1 on device mlx5_3
Interactive-mode selected
testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=171456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc
testpmd: create a new mbuf pool <mbuf_pool_socket_1>: n=171456, size=2176, socket=1
testpmd: preferred mempool ops selected: ring_mp_mc
Warning! port-topology=paired and odd forward ports number, the last port will pair with itself.
Configuring Port 0 (socket 0)
Port 0: B8:59:9F:DB:22:20
Checking link statuses...
Done
testpmd> flow create 0 ingress group 1 priority 0 pattern eth dst is 00:16:3e:2e:7b:6a / vlan vid is 1480 / end actions of_pop_vlan / queue index 0 / end Caught error type 1 (cause unspecified): cannot create table: Cannot allocate memory
BR,
Hideyuki Yamashita
Hi, Hideyuki
Quoted 15 lines
-----Original Message-----
From: Hideyuki Yamashita <[email protected]>
Sent: Wednesday, October 30, 2019 12:46
To: Slava Ovsiienko <[email protected]>
Cc: [email protected]
Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on VLAN headerHello Slava,
Thanks for your help.
I added magic phrase. with chaging PCI number with proper one in my env.It changes situation but still result in error.
Quoted 8 lines
I used /usertools/dpdk-setup.sh to allocate hugepage dynamically. Your help is appreciated.
I think it is getting closer. tx_h-yamashita@R730n10:~/dpdk-next-net/x86_64-native-linuxapp- gcc/app$
sudo ./testpmd -c0xF-n 4 -w 03:00.0,dv_flow_en=1 --socket-mem 512,512 - -huge-dir=/mnt/h uge1G --log-level port:8 -- -i --portmask=0x1 --nb-cores=2
mlx5 PMD supports two flow engines:
- Verbs, this is legacy one, almost no new features are being added, just bug fixes, provides slow rule insertion rate, etc.
- Direct Rules, the new one, all new features are being added here.
(We had one more intermediate engine - Direct Verbs, it was dropped, but prefix dv in dv_flow_en remains 😊)
Verbs are supported over all NICs - ConnectX-4,ConnectX-4LX, ConnectX-5, ConnectX-6, etc. Direct Rules is supported for NICs starting from ConnectX-5.
"dv_flow_en=1" partameter engages Direct Rules, but I see you run testpmd over 03:00.0 which is ConnectX-4, not supporting Direct Rules.
Please, run over ConnectX-5 you have on your host.
As for error - it is not related to memory, rdma core just failed to create the group table, because ConnectX-4 does not support DR.
With best regards, Slava
Quoted 35 lines
--txq=16 --rxq=16
EAL: Detected 48 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket/var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: Probing VFIO support...
EAL: PCI device 0000:03:00.0 on NUMA socket 0
EAL: probe driver: 15b3:1015net_mlx5net_mlx5: mlx5.c:1852:mlx5_dev_spawn(): can't query devx port 1 on devicemlx5_3Interactive-mode selected
testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=171456, size=2176, socket=0
testpmd: preferred mempool ops selected:ring_mp_mc
testpmd: create a new mbuf pool <mbuf_pool_socket_1>: n=171456, size=2176, socket=1
testpmd: preferred mempool ops selected:ring_mp_mcWarning! port-topology=paired and odd forward ports number, the last port will pair with itself.
Configuring Port 0 (socket 0)
Port 0: B8:59:9F:DB:22:20
Checking link statuses...
Done
testpmd> flow create 0 ingress group 1 priority 0 pattern eth dst is testpmd> 00:16:3e:2e:7b:6a / vlan vid is 1480 / end actionsof_pop_vlantestpmd> / queue index 0 / end
Caught error type 1 (cause unspecified): cannot create table: Cannot allocate memoryBR,
Hideyuki Yamashita
Dear Slava,
Your guess is corrrect.
When I put flow into Connect-X5, it was successful.
General question.
Are there any way to input flow to ConnectX-4? In another word, are there any way to activate Verb? And which type of flow is supported in Verb?
-----------------------------------------------------------
tx_h-yamashita@R730n10:~/dpdk-next-net/x86_64-native-linuxapp-gcc/app$ sudo ./te stpmd -c 0xF -n 4 -w 04:00.0,dv_flow_en=1 --socket-mem 512,512 --huge-dir=/mnt/h uge1G --log-level port:8 -- -i --portmask=0x1 --nb-cores=2 --txq=16 --rxq=16 [sudo] password for tx_h-yamashita: EAL: Detected 48 lcore(s) EAL: Detected 2 NUMA nodes EAL: Multi-process socket /var/run/dpdk/rte/mp_socket EAL: Selected IOVA mode 'PA' EAL: Probing VFIO support... EAL: PCI device 0000:04:00.0 on NUMA socket 0 EAL: probe driver: 15b3:1017 net_mlx5 net_mlx5: mlx5.c:1852: mlx5_dev_spawn(): can't query devx port 1 on device mlx5_ 1
Interactive-mode selected
testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=171456, size=2176, socke t=0
testpmd: preferred mempool ops selected: ring_mp_mc
testpmd: create a new mbuf pool <mbuf_pool_socket_1>: n=171456, size=2176, socke t=1
testpmd: preferred mempool ops selected: ring_mp_mc
Warning! port-topology=paired and odd forward ports number, the last port will p air with itself.
Configuring Port 0 (socket 0)
Port 0: B8:59:9F:C1:4A:CE
Checking link statuses...
Done
testpmd>
testpmd> flow create 0 ingress group 1 priority 0 pattern eth dst is 00:16:3e:2 e:7b:6a / vlan vid is 1480 / end actions of_pop_vlan / queue index 0 / end
Flow rule #0 created
testpmd>
--------------------------------------------------------------------------------------------------------------
BR,
Hideyuki Yamashita
NTT TechnoCross
Quoted 81 lines
Hi, Hideyuki
Quoted 15 lines
-----Original Message-----
From: Hideyuki Yamashita <[email protected]>
Sent: Wednesday, October 30, 2019 12:46
To: Slava Ovsiienko <[email protected]>
Cc: [email protected]
Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on VLAN headerHello Slava,
Thanks for your help.
I added magic phrase. with chaging PCI number with proper one in my env.It changes situation but still result in error.
Quoted 8 lines
I used /usertools/dpdk-setup.sh to allocate hugepage dynamically. Your help is appreciated.
I think it is getting closer. tx_h-yamashita@R730n10:~/dpdk-next-net/x86_64-native-linuxapp- gcc/app$
sudo ./testpmd -c0xF-n 4 -w 03:00.0,dv_flow_en=1 --socket-mem 512,512 - -huge-dir=/mnt/h uge1G --log-level port:8 -- -i --portmask=0x1 --nb-cores=2mlx5 PMD supports two flow engines:
- Verbs, this is legacy one, almost no new features are being added, just bug fixes, provides slow rule insertion rate, etc.
- Direct Rules, the new one, all new features are being added here.(We had one more intermediate engine - Direct Verbs, it was dropped, but prefix dv in
dv_flow_enremains ??)Verbs are supported over all NICs - ConnectX-4,ConnectX-4LX, ConnectX-5, ConnectX-6, etc. Direct Rules is supported for NICs starting from ConnectX-5.
"dv_flow_en=1" partameter engages Direct Rules, but I see you run testpmd over 03:00.0 which is ConnectX-4, not supporting Direct Rules.
Please, run over ConnectX-5 you have on your host.As for error - it is not related to memory, rdma core just failed to create the group table, because ConnectX-4 does not support DR.
With best regards, Slava
Quoted 35 lines
--txq=16 --rxq=16
EAL: Detected 48 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket/var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: Probing VFIO support...
EAL: PCI device 0000:03:00.0 on NUMA socket 0
EAL: probe driver: 15b3:1015net_mlx5net_mlx5: mlx5.c:1852:mlx5_dev_spawn(): can't query devx port 1 on devicemlx5_3Interactive-mode selected
testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=171456, size=2176, socket=0
testpmd: preferred mempool ops selected:ring_mp_mc
testpmd: create a new mbuf pool <mbuf_pool_socket_1>: n=171456, size=2176, socket=1
testpmd: preferred mempool ops selected:ring_mp_mcWarning! port-topology=paired and odd forward ports number, the last port will pair with itself.
Configuring Port 0 (socket 0)
Port 0: B8:59:9F:DB:22:20
Checking link statuses...
Done
testpmd> flow create 0 ingress group 1 priority 0 pattern eth dst is testpmd> 00:16:3e:2e:7b:6a / vlan vid is 1480 / end actionsof_pop_vlantestpmd> / queue index 0 / end
Caught error type 1 (cause unspecified): cannot create table: Cannot allocate memoryBR,
Hideyuki Yamashita
Quoted 8 lines
-----Original Message-----
From: Hideyuki Yamashita <[email protected]>
Sent: Thursday, October 31, 2019 11:52
To: Slava Ovsiienko <[email protected]>
Cc: [email protected]
Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on VLAN header
Quoted 4 lines
Dear Slava,
Your guess is corrrect.
When I put flow into Connect-X5, it was successful.
Very nice.
Quoted 2 lines
General question.
As we know - general questions are the most hard ones to answer 😊.
Quoted 1 line
Are there any way to input flow to ConnectX-4?
As usual - with RTE flow API. Just omit dv_flow_en, or specify dv_flow_en=0 and mlx5 PMD will handle RTE flow API via Verbs engine, supported by ConnectX-4.
Quoted 2 lines
In another word, are there any way to activate Verb? And which type of flow is supported in Verb?
Please, see flow_verbs_validate() routine in the mlx5_flow_verbs.c, it shows which RTE flow items and actions are actually supported by Verbs.
With best regards, Slava
Quoted 133 lines
-----------------------------------------------------------
tx_h-yamashita@R730n10:~/dpdk-next-net/x86_64-native-linuxapp-
gcc/app$ sudo ./te stpmd -c0xF-n 4 -w 04:00.0,dv_flow_en=1 --socket-
mem 512,512 --huge-dir=/mnt/h
uge1G --log-level port:8 -- -i --portmask=0x1 --nb-cores=2 --txq=16 --rxq=16 [sudo] password for tx_h-yamashita:
EAL: Detected 48 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket/var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: Probing VFIO support...
EAL: PCI device 0000:04:00.0 on NUMA socket 0
EAL: probe driver: 15b3:1017net_mlx5net_mlx5: mlx5.c:1852:mlx5_dev_spawn(): can't query devx port 1 on devicemlx5_1Interactive-mode selected
testpmd: create a new mbuf pool <
mbuf_pool_socket_0>: n=171456,
size=2176, socke t=0
testpmd: preferred mempool ops selected:ring_mp_mc
testpmd: create a new mbuf pool <mbuf_pool_socket_1>: n=171456,
size=2176, socke t=1
testpmd: preferred mempool ops selected:ring_mp_mcWarning! port-topology=paired and odd forward ports number, the last port
will p air with itself.Configuring Port 0 (socket 0)
Port 0: B8:59:9F:C1:4A:CE
Checking link statuses...
Done
testpmd>
testpmd> flow create 0 ingress group 1 priority 0 pattern eth dst is
00:16:3e:2 e:7b:6a / vlan vid is 1480 / end actionsof_pop_vlan/ queue
index 0 / end
Flow rule #0 created
testpmd>
---------------------------------------------------------------------------------------------
-----------------BR,
Hideyuki Yamashita
NTT TechnoCrossQuoted 14 lines
Hi, Hideyuki
Quoted 12 lines
-----Original Message-----
From: Hideyuki Yamashita <[email protected]>
Sent: Wednesday, October 30, 2019 12:46
To: Slava Ovsiienko <[email protected]>
Cc: [email protected]
Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on VLAN headerHello Slava,
Thanks for your help.
I added magic phrase. with chaging PCI number with proper one in myenv.
Quoted 13 lines
Quoted 6 lines
It changes situation but still result in error.
I used /usertools/dpdk-setup.sh to allocate hugepage dynamically. Your help is appreciated.
Quoted 6 lines
I think it is getting closer. tx_h-yamashita@R730n10:~/dpdk-next-net/x86_64-native-linuxapp- gcc/app$
sudo ./testpmd -c0xF-n 4 -w 03:00.0,dv_flow_en=1 --socket-mem 512,512 - -huge-dir=/mnt/h uge1G --log-level port:8 -- -i --portmask=0x1 --nb-cores=2Quoted 2 lines
mlx5 PMD supports two flow engines:
- Verbs, this is legacy one, almost no new features are being added, justbug fixes,
Quoted 7 lines
provides slow rule insertion rate, etc.
- Direct Rules, the new one, all new features are being added here.(We had one more intermediate engine - Direct Verbs, it was dropped, but prefix dv in
dv_flow_enremains ??)Verbs are supported over all NICs - ConnectX-4,ConnectX-4LX, ConnectX-5,
ConnectX-6, etc.
Quoted 47 lines
Direct Rules is supported for NICs starting from ConnectX-5. "dv_flow_en=1" partameter engages Direct Rules, but I see you run testpmd over 03:00.0 which is ConnectX-4, not supporting Direct Rules. Please, run over ConnectX-5 you have on your host.
As for error - it is not related to memory, rdma core just failed to create the group table, because ConnectX-4 does not support DR.
With best regards, Slava
Quoted 36 lines
--txq=16 --rxq=16
EAL: Detected 48 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket/var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: Probing VFIO support...
EAL: PCI device 0000:03:00.0 on NUMA socket 0
EAL: probe driver: 15b3:1015net_mlx5net_mlx5: mlx5.c:1852:mlx5_dev_spawn(): can't query devx port 1 on devicemlx5_3Interactive-mode selected
testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=171456, size=2176, socket=0
testpmd: preferred mempool ops selected:ring_mp_mc
testpmd: create a new mbuf pool <mbuf_pool_socket_1>: n=171456, size=2176, socket=1
testpmd: preferred mempool ops selected:ring_mp_mcWarning! port-topology=paired and odd forward ports number, the last port will pair with itself.
Configuring Port 0 (socket 0)
Port 0: B8:59:9F:DB:22:20
Checking link statuses...
Done
testpmd> flow create 0 ingress group 1 priority 0 pattern eth dst is testpmd> 00:16:3e:2e:7b:6a / vlan vid is 1480 / end actions testpmd>of_pop_vlan/ queue index 0 / end
Caught error type 1 (cause unspecified): cannot create table: Cannot allocate memoryBR,
Hideyuki Yamashita
Dear Slava,
Thanks for your response.
Inputting other flows failed while some flows are created. Please help on the following two cases.
1) I would like to detag vlan tag which has specific destionation MAC address. No condition about vlan id value.
testpmd> flow create 0 ingress group 1 pattern eth dst is AA:AA:AA:AA:AA:AA / vlan / any / end actions of_pop_vlan / queue index 1 / end Caught error type 10 (item specification): VLAN cannot be empty: Invalid argument
testpmd> flow create 0 ingress group 1 pattern eth dst is AA:AA:AA:AA:AA:AA / vlan vid is 100 / end actions of_pop_vlan / queue index 1 / end Flow rule #0 created
2) I would like to entag vlan tag
testpmd> flow create 0 egress group 1 pattern eth src is BB:BB:BB:BB:BB:BB / end actions of_push_vlan ethertype 0x8100 / of_set_vlan_vid vlan_vid 100 / of_set_vlan_pcp vlan_pcp 3 / end Caught error type 16 (specific action): cause: 0x7ffdc9d98348, match on VLAN is required in order to set VLAN VID: Invalid argument
Thanks!
BR,
Hideyuki Yamashita
NTT TechnoCross
Quoted 164 lines
Quoted 8 lines
-----Original Message-----
From: Hideyuki Yamashita <[email protected]>
Sent: Thursday, October 31, 2019 11:52
To: Slava Ovsiienko <[email protected]>
Cc: [email protected]
Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on VLAN headerQuoted 4 lines
Dear Slava,
Your guess is corrrect.
When I put flow into Connect-X5, it was successful.Very nice.
Quoted 2 lines
General question.
As we know - general questions are the most hard ones to answer ??.
Quoted 1 line
Are there any way to input flow to ConnectX-4?
As usual - with RTE flow API. Just omit
dv_flow_en, or specify dv_flow_en=0 and mlx5 PMD will handle RTE flow API via Verbs engine, supported by ConnectX-4.Quoted 2 lines
In another word, are there any way to activate Verb? And which type of flow is supported in Verb?
Please, see
flow_verbs_validate()routine in themlx5_flow_verbs.c, it shows which RTE flow items and actions are actually supported by Verbs.With best regards, Slava
Quoted 133 lines
-----------------------------------------------------------
tx_h-yamashita@R730n10:~/dpdk-next-net/x86_64-native-linuxapp-
gcc/app$ sudo ./te stpmd -c0xF-n 4 -w 04:00.0,dv_flow_en=1 --socket-
mem 512,512 --huge-dir=/mnt/h
uge1G --log-level port:8 -- -i --portmask=0x1 --nb-cores=2 --txq=16 --rxq=16 [sudo] password for tx_h-yamashita:
EAL: Detected 48 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket/var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: Probing VFIO support...
EAL: PCI device 0000:04:00.0 on NUMA socket 0
EAL: probe driver: 15b3:1017net_mlx5net_mlx5: mlx5.c:1852:mlx5_dev_spawn(): can't query devx port 1 on devicemlx5_1Interactive-mode selected
testpmd: create a new mbuf pool <
mbuf_pool_socket_0>: n=171456,
size=2176, socke t=0
testpmd: preferred mempool ops selected:ring_mp_mc
testpmd: create a new mbuf pool <mbuf_pool_socket_1>: n=171456,
size=2176, socke t=1
testpmd: preferred mempool ops selected:ring_mp_mcWarning! port-topology=paired and odd forward ports number, the last port
will p air with itself.Configuring Port 0 (socket 0)
Port 0: B8:59:9F:C1:4A:CE
Checking link statuses...
Done
testpmd>
testpmd> flow create 0 ingress group 1 priority 0 pattern eth dst is
00:16:3e:2 e:7b:6a / vlan vid is 1480 / end actionsof_pop_vlan/ queue
index 0 / end
Flow rule #0 created
testpmd>
---------------------------------------------------------------------------------------------
-----------------BR,
Hideyuki Yamashita
NTT TechnoCrossQuoted 14 lines
Hi, Hideyuki
Quoted 12 lines
-----Original Message-----
From: Hideyuki Yamashita <[email protected]>
Sent: Wednesday, October 30, 2019 12:46
To: Slava Ovsiienko <[email protected]>
Cc: [email protected]
Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on VLAN headerHello Slava,
Thanks for your help.
I added magic phrase. with chaging PCI number with proper one in myenv.
Quoted 13 lines
Quoted 6 lines
It changes situation but still result in error.
I used /usertools/dpdk-setup.sh to allocate hugepage dynamically. Your help is appreciated.
Quoted 6 lines
I think it is getting closer. tx_h-yamashita@R730n10:~/dpdk-next-net/x86_64-native-linuxapp- gcc/app$
sudo ./testpmd -c0xF-n 4 -w 03:00.0,dv_flow_en=1 --socket-mem 512,512 - -huge-dir=/mnt/h uge1G --log-level port:8 -- -i --portmask=0x1 --nb-cores=2Quoted 2 lines
mlx5 PMD supports two flow engines:
- Verbs, this is legacy one, almost no new features are being added, justbug fixes,
Quoted 7 lines
provides slow rule insertion rate, etc.
- Direct Rules, the new one, all new features are being added here.(We had one more intermediate engine - Direct Verbs, it was dropped, but prefix dv in
dv_flow_enremains ??)Verbs are supported over all NICs - ConnectX-4,ConnectX-4LX, ConnectX-5,
ConnectX-6, etc.
Quoted 47 lines
Direct Rules is supported for NICs starting from ConnectX-5. "dv_flow_en=1" partameter engages Direct Rules, but I see you run testpmd over 03:00.0 which is ConnectX-4, not supporting Direct Rules. Please, run over ConnectX-5 you have on your host.
As for error - it is not related to memory, rdma core just failed to create the group table, because ConnectX-4 does not support DR.
With best regards, Slava
Quoted 36 lines
--txq=16 --rxq=16
EAL: Detected 48 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket/var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: Probing VFIO support...
EAL: PCI device 0000:03:00.0 on NUMA socket 0
EAL: probe driver: 15b3:1015net_mlx5net_mlx5: mlx5.c:1852:mlx5_dev_spawn(): can't query devx port 1 on devicemlx5_3Interactive-mode selected
testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=171456, size=2176, socket=0
testpmd: preferred mempool ops selected:ring_mp_mc
testpmd: create a new mbuf pool <mbuf_pool_socket_1>: n=171456, size=2176, socket=1
testpmd: preferred mempool ops selected:ring_mp_mcWarning! port-topology=paired and odd forward ports number, the last port will pair with itself.
Configuring Port 0 (socket 0)
Port 0: B8:59:9F:DB:22:20
Checking link statuses...
Done
testpmd> flow create 0 ingress group 1 priority 0 pattern eth dst is testpmd> 00:16:3e:2e:7b:6a / vlan vid is 1480 / end actions testpmd>of_pop_vlan/ queue index 0 / end
Caught error type 1 (cause unspecified): cannot create table: Cannot allocate memoryBR,
Hideyuki Yamashita
Dear Slava,
Additional question.
When I use testpmd in dpdk-next-net repo, it works in general. However when I use dpdk19.11-rc1, testpmd does not recognize connectX-5 NIC.
Is it correct that ConnectX-5 will be recognized in 19.11 release finally?
If yes, which release candidate the necessary change will be mergerd and available?
BR,
Hideyuki Yamashita
NTT TechnoCross
Quoted 193 lines
Dear Slava,
Thanks for your response.
Inputting other flows failed while some flows are created. Please help on the following two cases.
1) I would like to detag vlan tag which has specific destionation MAC address. No condition about vlan id value.
testpmd> flow create 0 ingress group 1 pattern eth dst is AA:AA:AA:AA:AA:AA / vlan / any / end actions
of_pop_vlan/ queue index 1 / end Caught error type 10 (item specification): VLAN cannot be empty: Invalid argument
testpmd> flow create 0 ingress group 1 pattern eth dst is AA:AA:AA:AA:AA:AA / vlan vid is 100 / end actionsof_pop_vlan/ queue index 1 / end Flow rule #0 created2) I would like to entag vlan tag
testpmd> flow create 0 egress group 1 pattern eth src is BB:BB:BB:BB:BB:BB / end actions
of_push_vlanethertype0x8100/of_set_vlan_vidvlan_vid100 /of_set_vlan_pcpvlan_pcp3 / end Caught error type 16 (specific action): cause:0x7ffdc9d98348, match on VLAN is required in order to set VLAN VID: Invalid argumentThanks!
BR,
Hideyuki Yamashita
NTT TechnoCrossQuoted 164 lines
Quoted 8 lines
-----Original Message-----
From: Hideyuki Yamashita <[email protected]>
Sent: Thursday, October 31, 2019 11:52
To: Slava Ovsiienko <[email protected]>
Cc: [email protected]
Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on VLAN headerQuoted 4 lines
Dear Slava,
Your guess is corrrect.
When I put flow into Connect-X5, it was successful.Very nice.
Quoted 2 lines
General question.
As we know - general questions are the most hard ones to answer ??.
Quoted 1 line
Are there any way to input flow to ConnectX-4?
As usual - with RTE flow API. Just omit
dv_flow_en, or specify dv_flow_en=0 and mlx5 PMD will handle RTE flow API via Verbs engine, supported by ConnectX-4.Quoted 2 lines
In another word, are there any way to activate Verb? And which type of flow is supported in Verb?
Please, see
flow_verbs_validate()routine in themlx5_flow_verbs.c, it shows which RTE flow items and actions are actually supported by Verbs.With best regards, Slava
Quoted 133 lines
-----------------------------------------------------------
tx_h-yamashita@R730n10:~/dpdk-next-net/x86_64-native-linuxapp-
gcc/app$ sudo ./te stpmd -c0xF-n 4 -w 04:00.0,dv_flow_en=1 --socket-
mem 512,512 --huge-dir=/mnt/h
uge1G --log-level port:8 -- -i --portmask=0x1 --nb-cores=2 --txq=16 --rxq=16 [sudo] password for tx_h-yamashita:
EAL: Detected 48 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket/var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: Probing VFIO support...
EAL: PCI device 0000:04:00.0 on NUMA socket 0
EAL: probe driver: 15b3:1017net_mlx5net_mlx5: mlx5.c:1852:mlx5_dev_spawn(): can't query devx port 1 on devicemlx5_1Interactive-mode selected
testpmd: create a new mbuf pool <
mbuf_pool_socket_0>: n=171456,
size=2176, socke t=0
testpmd: preferred mempool ops selected:ring_mp_mc
testpmd: create a new mbuf pool <mbuf_pool_socket_1>: n=171456,
size=2176, socke t=1
testpmd: preferred mempool ops selected:ring_mp_mcWarning! port-topology=paired and odd forward ports number, the last port
will p air with itself.Configuring Port 0 (socket 0)
Port 0: B8:59:9F:C1:4A:CE
Checking link statuses...
Done
testpmd>
testpmd> flow create 0 ingress group 1 priority 0 pattern eth dst is
00:16:3e:2 e:7b:6a / vlan vid is 1480 / end actionsof_pop_vlan/ queue
index 0 / end
Flow rule #0 created
testpmd>
---------------------------------------------------------------------------------------------
-----------------BR,
Hideyuki Yamashita
NTT TechnoCrossQuoted 14 lines
Hi, Hideyuki
Quoted 12 lines
-----Original Message-----
From: Hideyuki Yamashita <[email protected]>
Sent: Wednesday, October 30, 2019 12:46
To: Slava Ovsiienko <[email protected]>
Cc: [email protected]
Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on VLAN headerHello Slava,
Thanks for your help.
I added magic phrase. with chaging PCI number with proper one in myenv.
Quoted 13 lines
Quoted 6 lines
It changes situation but still result in error.
I used /usertools/dpdk-setup.sh to allocate hugepage dynamically. Your help is appreciated.
Quoted 6 lines
I think it is getting closer. tx_h-yamashita@R730n10:~/dpdk-next-net/x86_64-native-linuxapp- gcc/app$
sudo ./testpmd -c0xF-n 4 -w 03:00.0,dv_flow_en=1 --socket-mem 512,512 - -huge-dir=/mnt/h uge1G --log-level port:8 -- -i --portmask=0x1 --nb-cores=2Quoted 2 lines
mlx5 PMD supports two flow engines:
- Verbs, this is legacy one, almost no new features are being added, justbug fixes,
Quoted 7 lines
provides slow rule insertion rate, etc.
- Direct Rules, the new one, all new features are being added here.(We had one more intermediate engine - Direct Verbs, it was dropped, but prefix dv in
dv_flow_enremains ??)Verbs are supported over all NICs - ConnectX-4,ConnectX-4LX, ConnectX-5,
ConnectX-6, etc.
Quoted 47 lines
Direct Rules is supported for NICs starting from ConnectX-5. "dv_flow_en=1" partameter engages Direct Rules, but I see you run testpmd over 03:00.0 which is ConnectX-4, not supporting Direct Rules. Please, run over ConnectX-5 you have on your host.
As for error - it is not related to memory, rdma core just failed to create the group table, because ConnectX-4 does not support DR.
With best regards, Slava
Quoted 36 lines
--txq=16 --rxq=16
EAL: Detected 48 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket/var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: Probing VFIO support...
EAL: PCI device 0000:03:00.0 on NUMA socket 0
EAL: probe driver: 15b3:1015net_mlx5net_mlx5: mlx5.c:1852:mlx5_dev_spawn(): can't query devx port 1 on devicemlx5_3Interactive-mode selected
testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=171456, size=2176, socket=0
testpmd: preferred mempool ops selected:ring_mp_mc
testpmd: create a new mbuf pool <mbuf_pool_socket_1>: n=171456, size=2176, socket=1
testpmd: preferred mempool ops selected:ring_mp_mcWarning! port-topology=paired and odd forward ports number, the last port will pair with itself.
Configuring Port 0 (socket 0)
Port 0: B8:59:9F:DB:22:20
Checking link statuses...
Done
testpmd> flow create 0 ingress group 1 priority 0 pattern eth dst is testpmd> 00:16:3e:2e:7b:6a / vlan vid is 1480 / end actions testpmd>of_pop_vlan/ queue index 0 / end
Caught error type 1 (cause unspecified): cannot create table: Cannot allocate memoryBR,
Hideyuki Yamashita
Hi, Hideyuki
Quoted 8 lines
-----Original Message-----
From: Hideyuki Yamashita <[email protected]>
Sent: Wednesday, November 6, 2019 13:04
To: Slava Ovsiienko <[email protected]>
Cc: [email protected]
Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on VLAN header
Quoted 6 lines
Dear Slava,
Additional question.
When I use testpmd in dpdk-next-net repo, it works in general. However when I use dpdk19.11-rc1, testpmd does not recognize connectX-5 NIC.
It is quite strange, it should be, ConnectX-5 is base Mellanox NIC now. Could you, please:
- configure "CONFIG_RTE_LIBRTE_MLX5_DEBUG=y" in ./config/common_base
- reconfigure DPDK and rebuild testpmd
- run testpmd with --log-level=99 --log-level=pmd.net.mlx5:8 (before -- separator)
- see (and provide) the log, where it drops the eth_dev object spawning
Quoted 2 lines
Is it correct that ConnectX-5 will be recognized in 19.11 release finally?
It should be recognized in 19.11rc1, possible we have some configuration issue, let's have a look at.
Quoted 27 lines
If yes, which release candidate the necessary change will be mergerd and available?
BR,
Hideyuki Yamashita
NTT TechnoCrossQuoted 19 lines
Dear Slava,
Thanks for your response.
Inputting other flows failed while some flows are created. Please help on the following two cases.
1) I would like to detag vlan tag which has specific destionation MAC address. No condition about vlan id value.
testpmd> flow create 0 ingress group 1 pattern eth dst is testpmd> AA:AA:AA:AA:AA:AA / vlan / any / end actions
of_pop_vlan/ testpmd> queue index 1 / end
Caught error type 10 (item specification): VLAN cannot be empty:
Invalid argument
testpmd> flow create 0 ingress group 1 pattern eth dst is testpmd> AA:AA:AA:AA:AA:AA / vlan vid is 100 / end actionsof_pop_vlantestpmd> / queue index 1 / end
Flow rule #0 created
I'll check, possible this validation reject is imposed by HW limitations - it requires the VLAN header presence and (IIRC) VID match. If possible - we'll fix.
Quoted 10 lines
Quoted 10 lines
2) I would like to entag vlan tag
testpmd> flow create 0 egress group 1 pattern eth src is testpmd> BB:BB:BB:BB:BB:BB / end actions
of_push_vlanethertype testpmd>0x8100/of_set_vlan_vidvlan_vid100 /of_set_vlan_pcptestpmd>vlan_pcp3 / end
Caught error type 16 (specific action): cause:0x7ffdc9d98348, match on VLAN is required in order to set VLAN VID: Invalid argument
It is fixed (and patch Is already merged - http://patches.dpdk.org/patch/62295/),
let's try coming 19.11rc2. I inserted your Flow successfully on current Upstream..
With best regards, Slava
Quoted 189 lines
Quoted 29 lines
Thanks!
BR,
Hideyuki Yamashita
NTT TechnoCrossQuoted 21 lines
Quoted 8 lines
-----Original Message-----
From: Hideyuki Yamashita <[email protected]>
Sent: Thursday, October 31, 2019 11:52
To: Slava Ovsiienko <[email protected]>
Cc: [email protected]
Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on VLAN headerQuoted 4 lines
Dear Slava,
Your guess is corrrect.
When I put flow into Connect-X5, it was successful.Very nice.
Quoted 2 lines
General question.
As we know - general questions are the most hard ones to answer ??.
Quoted 1 line
Are there any way to input flow to ConnectX-4?
As usual - with RTE flow API. Just omit
dv_flow_en, or specify dv_flow_en=0 and mlx5 PMD will handle RTE flow API via Verbs engine,supported by ConnectX-4.
Quoted 5 lines
Quoted 5 lines
Quoted 3 lines
In another word, are there any way to activate Verb? And which type of flow is supported in Verb?
Please, see
flow_verbs_validate()routine in themlx5_flow_verbs.c, it shows which RTE flow items and actions are actually supported byVerbs.
Quoted 8 lines
Quoted 8 lines
With best regards, Slava
Quoted 4 lines
-----------------------------------------------------------
tx_h-yamashita@R730n10:~/dpdk-next-net/x86_64-native-linuxapp-
gcc/app$ sudo ./te stpmd -c0xF-n 4 -w 04:00.0,dv_flow_en=1 --socket-
Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
mem 512,512 --huge-dir=/mnt/h
uge1G --log-level port:8 -- -i --portmask=0x1 --nb-cores=2 --txq=16 --rxq=16 [sudo] password for tx_h-yamashita:
EAL: Detected 48 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket/var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: Probing VFIO support...
EAL: PCI device 0000:04:00.0 on NUMA socket 0
EAL: probe driver: 15b3:1017net_mlx5net_mlx5: mlx5.c:1852:mlx5_dev_spawn(): can't query devx port 1 ondevice
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
mlx5_1Interactive-mode selected
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
testpmd: create a new mbuf pool <
mbuf_pool_socket_0>: n=171456,
size=2176, socke t=0
testpmd: preferred mempool ops selected:ring_mp_mc
testpmd: create a new mbuf pool <mbuf_pool_socket_1>: n=171456,
size=2176, socke t=1
testpmd: preferred mempool ops selected:ring_mp_mcWarning! port-topology=paired and odd forward ports number, the last
port
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
will p air with itself.
Configuring Port 0 (socket 0)
Port 0: B8:59:9F:C1:4A:CE
Checking link statuses...
Done
testpmd>
testpmd> flow create 0 ingress group 1 priority 0 pattern eth dst testpmd> is
00:16:3e:2 e:7b:6a / vlan vid is 1480 / end actionsof_pop_vlan/queue
Quoted 28 lines
Quoted 28 lines
Quoted 28 lines
index 0 / end
Flow rule #0 created
testpmd>
------------------------------------------------------------------
---------------------------
-----------------BR,
Hideyuki Yamashita
NTT TechnoCrossQuoted 15 lines
Hi, Hideyuki
Quoted 13 lines
-----Original Message-----
From: Hideyuki Yamashita <[email protected]>
Sent: Wednesday, October 30, 2019 12:46
To: Slava Ovsiienko <[email protected]>
Cc: [email protected]
Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on VLAN headerHello Slava,
Thanks for your help.
I added magic phrase. with chaging PCI number with proper one in myenv.
Quoted 1 line
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
It changes situation but still result in error.
I used /usertools/dpdk-setup.sh to allocate hugepage dynamically. Your help is appreciated.
I think it is getting closer. tx_h-yamashita@R730n10:~/dpdk-next-net/x86_64-native-
linuxapp-
Quoted 16 lines
Quoted 16 lines
Quoted 16 lines
Quoted 9 lines
Quoted 5 lines
gcc/app$
sudo ./testpmd -c0xF-n 4 -w 03:00.0,dv_flow_en=1 --socket-mem
512,512 - -huge-dir=/mnt/h uge1G --log-level port:8 -- -i --portmask=0x1 --nb-cores=2mlx5 PMD supports two flow engines:
- Verbs, this is legacy one, almost no new features are being added, justbug fixes,
Quoted 6 lines
provides slow rule insertion rate, etc.
- Direct Rules, the new one, all new features are being added here.(We had one more intermediate engine - Direct Verbs, it was dropped, but prefix dv in
dv_flow_enremains ??)Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 2 lines
Verbs are supported over all NICs - ConnectX-4,ConnectX-4LX, ConnectX-5,
ConnectX-6, etc.
Quoted 3 lines
Direct Rules is supported for NICs starting from ConnectX-5. "dv_flow_en=1" partameter engages Direct Rules, but I see you run testpmd over 03:00.0 which is ConnectX-4, not supporting Direct
Rules.
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Please, run over ConnectX-5 you have on your host.
As for error - it is not related to memory, rdma core just failed to create the group table, because ConnectX-4 does not
support DR.
Quoted 43 lines
Quoted 42 lines
Quoted 41 lines
Quoted 40 lines
With best regards, Slava
Quoted 36 lines
--txq=16 --rxq=16
EAL: Detected 48 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket/var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: Probing VFIO support...
EAL: PCI device 0000:03:00.0 on NUMA socket 0
EAL: probe driver: 15b3:1015net_mlx5net_mlx5: mlx5.c:1852:mlx5_dev_spawn(): can't query devx port 1 on devicemlx5_3Interactive-mode selected
testpmd: create a new mbuf pool <mbuf_pool_socket_0>:
n=171456, size=2176, socket=0
testpmd: preferred mempool ops selected:ring_mp_mc
testpmd: create a new mbuf pool <mbuf_pool_socket_1>:
n=171456, size=2176, socket=1
testpmd: preferred mempool ops selected:ring_mp_mcWarning! port-topology=paired and odd forward ports number, the last port will pair with itself.
Configuring Port 0 (socket 0)
Port 0: B8:59:9F:DB:22:20
Checking link statuses...
Done
testpmd> flow create 0 ingress group 1 priority 0 pattern eth testpmd> dst is 00:16:3e:2e:7b:6a / vlan vid is 1480 / end testpmd> actionsof_pop_vlan/ queue index 0 / end Caught error type 1 (cause unspecified): cannot create table:
Cannot allocate memoryBR,
Hideyuki Yamashita
Hi Slava,
Thanks for your response.
1. As you pointed out, it was configuration issue (CONFIG_RTE_LIBRTE_MLX5_DEBUG=y)! When I turned out the configuration, 19.11 rc1 recognized Connect-X5 corrcetly.
Thanks for your help.
2. How about the question I put in my previouse email (how to create flow for entag VLAN tag on not-tagged packet)
Thanks again.
BR,
Hideyuki Yamashita
NTT TechnoCross
Quoted 269 lines
Hi, Hideyuki
Quoted 8 lines
-----Original Message-----
From: Hideyuki Yamashita <[email protected]>
Sent: Wednesday, November 6, 2019 13:04
To: Slava Ovsiienko <[email protected]>
Cc: [email protected]
Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on VLAN headerQuoted 6 lines
Dear Slava,
Additional question.
When I use testpmd in dpdk-next-net repo, it works in general. However when I use dpdk19.11-rc1, testpmd does not recognize connectX-5 NIC.It is quite strange, it should be, ConnectX-5 is base Mellanox NIC now. Could you, please:
- configure "CONFIG_RTE_LIBRTE_MLX5_DEBUG=y" in ./config/common_base
- reconfigure DPDK and rebuild testpmd
- run testpmd with --log-level=99 --log-level=pmd.net.mlx5:8 (before -- separator)
- see (and provide) the log, where it drops theeth_devobject spawningQuoted 2 lines
Is it correct that ConnectX-5 will be recognized in 19.11 release finally?
It should be recognized in 19.11rc1, possible we have some configuration issue, let's have a look at.
Quoted 27 lines
If yes, which release candidate the necessary change will be mergerd and available?
BR,
Hideyuki Yamashita
NTT TechnoCrossQuoted 19 lines
Dear Slava,
Thanks for your response.
Inputting other flows failed while some flows are created. Please help on the following two cases.
1) I would like to detag vlan tag which has specific destionation MAC address. No condition about vlan id value.
testpmd> flow create 0 ingress group 1 pattern eth dst is testpmd> AA:AA:AA:AA:AA:AA / vlan / any / end actions
of_pop_vlan/ testpmd> queue index 1 / end
Caught error type 10 (item specification): VLAN cannot be empty:
Invalid argument
testpmd> flow create 0 ingress group 1 pattern eth dst is testpmd> AA:AA:AA:AA:AA:AA / vlan vid is 100 / end actionsof_pop_vlantestpmd> / queue index 1 / end
Flow rule #0 createdI'll check, possible this validation reject is imposed by HW limitations - it requires the VLAN header presence and (IIRC) VID match. If possible - we'll fix.
Quoted 10 lines
Quoted 10 lines
2) I would like to entag vlan tag
testpmd> flow create 0 egress group 1 pattern eth src is testpmd> BB:BB:BB:BB:BB:BB / end actions
of_push_vlanethertype testpmd>0x8100/of_set_vlan_vidvlan_vid100 /of_set_vlan_pcptestpmd>vlan_pcp3 / end
Caught error type 16 (specific action): cause:0x7ffdc9d98348, match on VLAN is required in order to set VLAN VID: Invalid argumentIt is fixed (and patch Is already merged - http://patches.dpdk.org/patch/62295/),
let's try coming 19.11rc2. I inserted your Flow successfully on current Upstream..With best regards, Slava
Quoted 189 lines
Quoted 29 lines
Thanks!
BR,
Hideyuki Yamashita
NTT TechnoCrossQuoted 21 lines
Quoted 8 lines
-----Original Message-----
From: Hideyuki Yamashita <[email protected]>
Sent: Thursday, October 31, 2019 11:52
To: Slava Ovsiienko <[email protected]>
Cc: [email protected]
Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on VLAN headerQuoted 4 lines
Dear Slava,
Your guess is corrrect.
When I put flow into Connect-X5, it was successful.Very nice.
Quoted 2 lines
General question.
As we know - general questions are the most hard ones to answer ??.
Quoted 1 line
Are there any way to input flow to ConnectX-4?
As usual - with RTE flow API. Just omit
dv_flow_en, or specify dv_flow_en=0 and mlx5 PMD will handle RTE flow API via Verbs engine,supported by ConnectX-4.
Quoted 5 lines
Quoted 5 lines
Quoted 3 lines
In another word, are there any way to activate Verb? And which type of flow is supported in Verb?
Please, see
flow_verbs_validate()routine in themlx5_flow_verbs.c, it shows which RTE flow items and actions are actually supported byVerbs.
Quoted 8 lines
Quoted 8 lines
With best regards, Slava
Quoted 4 lines
-----------------------------------------------------------
tx_h-yamashita@R730n10:~/dpdk-next-net/x86_64-native-linuxapp-
gcc/app$ sudo ./te stpmd -c0xF-n 4 -w 04:00.0,dv_flow_en=1 --socket-
Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
mem 512,512 --huge-dir=/mnt/h
uge1G --log-level port:8 -- -i --portmask=0x1 --nb-cores=2 --txq=16 --rxq=16 [sudo] password for tx_h-yamashita:
EAL: Detected 48 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket/var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: Probing VFIO support...
EAL: PCI device 0000:04:00.0 on NUMA socket 0
EAL: probe driver: 15b3:1017net_mlx5net_mlx5: mlx5.c:1852:mlx5_dev_spawn(): can't query devx port 1 ondevice
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
mlx5_1Interactive-mode selected
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
testpmd: create a new mbuf pool <
mbuf_pool_socket_0>: n=171456,
size=2176, socke t=0
testpmd: preferred mempool ops selected:ring_mp_mc
testpmd: create a new mbuf pool <mbuf_pool_socket_1>: n=171456,
size=2176, socke t=1
testpmd: preferred mempool ops selected:ring_mp_mcWarning! port-topology=paired and odd forward ports number, the last
port
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
will p air with itself.
Configuring Port 0 (socket 0)
Port 0: B8:59:9F:C1:4A:CE
Checking link statuses...
Done
testpmd>
testpmd> flow create 0 ingress group 1 priority 0 pattern eth dst testpmd> is
00:16:3e:2 e:7b:6a / vlan vid is 1480 / end actionsof_pop_vlan/queue
Quoted 28 lines
Quoted 28 lines
Quoted 28 lines
index 0 / end
Flow rule #0 created
testpmd>
------------------------------------------------------------------
---------------------------
-----------------BR,
Hideyuki Yamashita
NTT TechnoCrossQuoted 15 lines
Hi, Hideyuki
Quoted 13 lines
-----Original Message-----
From: Hideyuki Yamashita <[email protected]>
Sent: Wednesday, October 30, 2019 12:46
To: Slava Ovsiienko <[email protected]>
Cc: [email protected]
Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on VLAN headerHello Slava,
Thanks for your help.
I added magic phrase. with chaging PCI number with proper one in myenv.
Quoted 1 line
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
It changes situation but still result in error.
I used /usertools/dpdk-setup.sh to allocate hugepage dynamically. Your help is appreciated.
I think it is getting closer. tx_h-yamashita@R730n10:~/dpdk-next-net/x86_64-native-
linuxapp-
Quoted 16 lines
Quoted 16 lines
Quoted 16 lines
Quoted 9 lines
Quoted 5 lines
gcc/app$
sudo ./testpmd -c0xF-n 4 -w 03:00.0,dv_flow_en=1 --socket-mem
512,512 - -huge-dir=/mnt/h uge1G --log-level port:8 -- -i --portmask=0x1 --nb-cores=2mlx5 PMD supports two flow engines:
- Verbs, this is legacy one, almost no new features are being added, justbug fixes,
Quoted 6 lines
provides slow rule insertion rate, etc.
- Direct Rules, the new one, all new features are being added here.(We had one more intermediate engine - Direct Verbs, it was dropped, but prefix dv in
dv_flow_enremains ??)Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 2 lines
Verbs are supported over all NICs - ConnectX-4,ConnectX-4LX, ConnectX-5,
ConnectX-6, etc.
Quoted 3 lines
Direct Rules is supported for NICs starting from ConnectX-5. "dv_flow_en=1" partameter engages Direct Rules, but I see you run testpmd over 03:00.0 which is ConnectX-4, not supporting Direct
Rules.
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Please, run over ConnectX-5 you have on your host.
As for error - it is not related to memory, rdma core just failed to create the group table, because ConnectX-4 does not
support DR.
Quoted 43 lines
Quoted 42 lines
Quoted 41 lines
Quoted 40 lines
With best regards, Slava
Quoted 36 lines
--txq=16 --rxq=16
EAL: Detected 48 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket/var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: Probing VFIO support...
EAL: PCI device 0000:03:00.0 on NUMA socket 0
EAL: probe driver: 15b3:1015net_mlx5net_mlx5: mlx5.c:1852:mlx5_dev_spawn(): can't query devx port 1 on devicemlx5_3Interactive-mode selected
testpmd: create a new mbuf pool <mbuf_pool_socket_0>:
n=171456, size=2176, socket=0
testpmd: preferred mempool ops selected:ring_mp_mc
testpmd: create a new mbuf pool <mbuf_pool_socket_1>:
n=171456, size=2176, socket=1
testpmd: preferred mempool ops selected:ring_mp_mcWarning! port-topology=paired and odd forward ports number, the last port will pair with itself.
Configuring Port 0 (socket 0)
Port 0: B8:59:9F:DB:22:20
Checking link statuses...
Done
testpmd> flow create 0 ingress group 1 priority 0 pattern eth testpmd> dst is 00:16:3e:2e:7b:6a / vlan vid is 1480 / end testpmd> actionsof_pop_vlan/ queue index 0 / end Caught error type 1 (cause unspecified): cannot create table:
Cannot allocate memoryBR,
Hideyuki Yamashita
Hi, Hideyuki
Quoted 8 lines
-----Original Message-----
From: Hideyuki Yamashita <[email protected]>
Sent: Thursday, November 7, 2019 6:46
To: Slava Ovsiienko <[email protected]>
Cc: [email protected]
Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on VLAN header
Quoted 8 lines
Hi Slava,
Thanks for your response.
1. As you pointed out, it was configuration issue (
CONFIG_RTE_LIBRTE_MLX5_DEBUG=y)!
When I turned out the configuration, 19.11 rc1 recognized Connect-X5 corrcetly.
No-no, it is not configuration, this just enables debug features and Is helpful to locate the reason why ConnectX-5 was not detected on your setup. In release product, of coarse, the CONFIG_RTE_LIBRTE_MLX5_DEBUG must be "n"
Or was it just missed "CONFIG_RTE_LIBRTE_MLX5_PMD=y" ?
Quoted 5 lines
Thanks for your help.
2. How about the question I put in my previouse email (how to create flow for entag VLAN tag on not-tagged packet)
I'm sorry, I did not express my answer in clear way.
This issue is fixed, now you entagging Flow can be created successfully, I rechecked.
Now it works:
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
testpmd> flow create 0 egress group 1 pattern eth src is testpmd> BB:BB:BB:BB:BB:BB / end actions
of_push_vlanethertype testpmd>0x8100/of_set_vlan_vidvlan_vid100 /of_set_vlan_pcptestpmd>vlan_pcp3 / end
Please, take (coming on Friday) 19.11rc2 and try.
With best regards, Slava
Quoted 310 lines
Thanks again.
BR,
Hideyuki Yamashita
NTT TechnoCrossQuoted 12 lines
Hi, Hideyuki
Quoted 10 lines
-----Original Message-----
From: Hideyuki Yamashita <[email protected]>
Sent: Wednesday, November 6, 2019 13:04
To: Slava Ovsiienko <[email protected]>
Cc: [email protected]
Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on VLAN headerDear Slava,
Quoted 8 lines
Quoted 4 lines
Additional question.
When I use testpmd in dpdk-next-net repo, it works in general. However when I use dpdk19.11-rc1, testpmd does not recognize connectX-5 NIC.It is quite strange, it should be, ConnectX-5 is base Mellanox NIC now. Could you, please:
- configure "CONFIG_RTE_LIBRTE_MLX5_DEBUG=y" in./config/common_base
Quoted 40 lines
- reconfigure DPDK and rebuild testpmd
- run testpmd with --log-level=99 --log-level=pmd.net.mlx5:8 (before -- separator)
- see (and provide) the log, where it drops theeth_devobject spawningQuoted 2 lines
Is it correct that ConnectX-5 will be recognized in 19.11 release finally?
It should be recognized in 19.11rc1, possible we have some configuration issue, let's have a look at.
Quoted 27 lines
If yes, which release candidate the necessary change will be mergerd and available?
BR,
Hideyuki Yamashita
NTT TechnoCrossQuoted 19 lines
Dear Slava,
Thanks for your response.
Inputting other flows failed while some flows are created. Please help on the following two cases.
1) I would like to detag vlan tag which has specific destionation MAC address. No condition about vlan id value.
testpmd> flow create 0 ingress group 1 pattern eth dst is testpmd> AA:AA:AA:AA:AA:AA / vlan / any / end actions
of_pop_vlantestpmd> / queue index 1 / end
Caught error type 10 (item specification): VLAN cannot be empty:
Invalid argument
testpmd> flow create 0 ingress group 1 pattern eth dst is testpmd> AA:AA:AA:AA:AA:AA / vlan vid is 100 / end actions testpmd>of_pop_vlan/ queue index 1 / end
Flow rule #0 createdQuoted 2 lines
I'll check, possible this validation reject is imposed by HW limitations - it requires the VLAN header presence and (IIRC) VID match. If
possible - we'll fix.
Quoted 13 lines
Quoted 4 lines
Quoted 4 lines
2) I would like to entag vlan tag
Quoted 8 lines
Quoted 8 lines
testpmd> flow create 0 egress group 1 pattern eth src is testpmd> BB:BB:BB:BB:BB:BB / end actions
of_push_vlanethertype testpmd>0x8100/of_set_vlan_vidvlan_vid100 /of_set_vlan_pcptestpmd>vlan_pcp3 / end
Caught error type 16 (specific action): cause:0x7ffdc9d98348, match on VLAN is required in order to set VLAN VID: Invalid argumentQuoted 2 lines
It is fixed (and patch Is already merged -
https://eur03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fpatch
Quoted 1 line
es.dpdk.org%2Fpatch%2F62295%2F&data=02%7C01%7Cviacheslavo%4 0mellan
Quoted 1 line
ox.com%7Ca17dfb64b04f430237ff08d7633d7346%7Ca652971c7d2e4d9ba6
a4d14925Quoted 1 line
6f461b%7C0%7C1%7C637086987908448715&sdata=Uvi1bWYT%2BaHo TSHkQ8AF6%
Quoted 2 lines
2FnTx%2FP5UrMqtZ3gAzjqGAA%3D&reserved=0),
let's try coming 19.11rc2. I inserted your Flow successfully on currentUpstream..
Quoted 50 lines
With best regards, Slava
Quoted 45 lines
Quoted 30 lines
Thanks!
BR,
Hideyuki Yamashita
NTT TechnoCrossQuoted 22 lines
Quoted 8 lines
-----Original Message-----
From: Hideyuki Yamashita <[email protected]>
Sent: Thursday, October 31, 2019 11:52
To: Slava Ovsiienko <[email protected]>
Cc: [email protected]
Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on VLAN headerQuoted 4 lines
Dear Slava,
Your guess is corrrect.
When I put flow into Connect-X5, it was successful.Very nice.
Quoted 2 lines
General question.
As we know - general questions are the most hard ones to answer ??.
Quoted 1 line
Are there any way to input flow to ConnectX-4?
As usual - with RTE flow API. Just omit
dv_flow_en, or specify dv_flow_en=0 and mlx5 PMD will handle RTE flow API via Verbs engine,supported by ConnectX-4.
Quoted 6 lines
Quoted 6 lines
Quoted 3 lines
In another word, are there any way to activate Verb? And which type of flow is supported in Verb?
Please, see
flow_verbs_validate()routine in themlx5_flow_verbs.c, it shows which RTE flow items and actions are actually supported byVerbs.
Quoted 7 lines
Quoted 7 lines
With best regards, Slava
Quoted 3 lines
-----------------------------------------------------------
tx_h-yamashita@R730n10:~/dpdk-next-net/x86_64-native-linuxapp-
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
gcc/app$ sudo ./te stpmd -c
0xF-n 4 -w 04:00.0,dv_flow_en=1--
Quoted 13 lines
Quoted 13 lines
socket-
Quoted 12 lines
Quoted 12 lines
Quoted 12 lines
mem 512,512 --huge-dir=/mnt/h
uge1G --log-level port:8 -- -i --portmask=0x1 --nb-cores=2 --txq=16 --rxq=16 [sudo] password for tx_h-yamashita:
EAL: Detected 48 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket/var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: Probing VFIO support...
EAL: PCI device 0000:04:00.0 on NUMA socket 0
EAL: probe driver: 15b3:1017net_mlx5net_mlx5: mlx5.c:1852:mlx5_dev_spawn(): can't query devx port 1 onQuoted 6 lines
Quoted 6 lines
device
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
mlx5_1Interactive-mode selected
testpmd: create a new mbuf pool <
mbuf_pool_socket_0>:n=171456,
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
size=2176, socke t=0
testpmd: preferred mempool ops selected:ring_mp_mc
testpmd: create a new mbuf pool <mbuf_pool_socket_1>:n=171456,
Quoted 8 lines
Quoted 8 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
size=2176, socke t=1
testpmd: preferred mempool ops selected:ring_mp_mcWarning! port-topology=paired and odd forward ports number, the last
port
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
will p air with itself.
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Configuring Port 0 (socket 0)
Port 0: B8:59:9F:C1:4A:CE
Checking link statuses...
Done
testpmd>
testpmd> flow create 0 ingress group 1 priority 0 pattern eth testpmd> dst is
00:16:3e:2 e:7b:6a / vlan vid is 1480 / end actionsof_pop_vlan/
Quoted 25 lines
Quoted 25 lines
queue
Quoted 24 lines
Quoted 24 lines
Quoted 24 lines
index 0 / end
Flow rule #0 created
testpmd>
--------------------------------------------------------------
----
---------------------------
-----------------BR,
Hideyuki Yamashita
NTT TechnoCrossQuoted 12 lines
Hi, Hideyuki
Quoted 10 lines
-----Original Message-----
From: Hideyuki Yamashita <[email protected]>
Sent: Wednesday, October 30, 2019 12:46
To: Slava Ovsiienko <[email protected]>
Cc: [email protected]
Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on VLAN headerHello Slava,
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 3 lines
Quoted 3 lines
Thanks for your help.
I added magic phrase. with chaging PCI number with proper one in myenv.
Quoted 4 lines
Quoted 4 lines
It changes situation but still result in error.
I used /usertools/dpdk-setup.sh to allocate hugepage
dynamically.
Quoted 11 lines
Quoted 11 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Your help is appreciated.
I think it is getting closer. tx_h-yamashita@R730n10:~/dpdk-next-net/x86_64-native-
linuxapp-
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 5 lines
gcc/app$
sudo ./testpmd -c0xF-n 4 -w 03:00.0,dv_flow_en=1 --socket-mem
512,512 - -huge-dir=/mnt/h uge1G --log-level port:8 -- -i --portmask=0x1 --nb-cores=2Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 3 lines
mlx5 PMD supports two flow engines:
- Verbs, this is legacy one, almost no new features are being added, justbug fixes,
Quoted 2 lines
provides slow rule insertion rate, etc.
- Direct Rules, the new one, all new features are being addedhere.
Quoted 63 lines
Quoted 62 lines
Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
Quoted 6 lines
(We had one more intermediate engine - Direct Verbs, it was dropped, but prefix dv in
dv_flow_enremains ??)Verbs are supported over all NICs - ConnectX-4,ConnectX-4LX, ConnectX-5,
ConnectX-6, etc.
Quoted 4 lines
Direct Rules is supported for NICs starting from ConnectX-5. "dv_flow_en=1" partameter engages Direct Rules, but I see you run testpmd over 03:00.0 which is ConnectX-4, not supporting Direct
Rules.
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Please, run over ConnectX-5 you have on your host.
As for error - it is not related to memory, rdma core just failed to create the group table, because ConnectX-4 does not
support DR.
Quoted 43 lines
Quoted 42 lines
Quoted 41 lines
Quoted 40 lines
With best regards, Slava
Quoted 36 lines
--txq=16 --rxq=16
EAL: Detected 48 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket/var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: Probing VFIO support...
EAL: PCI device 0000:03:00.0 on NUMA socket 0
EAL: probe driver: 15b3:1015net_mlx5net_mlx5: mlx5.c:1852:mlx5_dev_spawn(): can't query devx port
1 on devicemlx5_3Interactive-mode selected
testpmd: create a new mbuf pool <mbuf_pool_socket_0>:
n=171456, size=2176, socket=0
testpmd: preferred mempool ops selected:ring_mp_mc
testpmd: create a new mbuf pool <mbuf_pool_socket_1>:
n=171456, size=2176, socket=1
testpmd: preferred mempool ops selected:ring_mp_mcWarning! port-topology=paired and odd forward ports number, the last port will pair with itself.
Configuring Port 0 (socket 0) Port 0: B8:59:9F:DB:22:20 Checking link statuses...
Done
testpmd> flow create 0 ingress group 1 priority 0 pattern testpmd> eth dst is 00:16:3e:2e:7b:6a / vlan vid is 1480 / testpmd> end actionsof_pop_vlan/ queue index 0 / end Caught error type 1 (cause unspecified): cannot create table:
Cannot allocate memoryBR,
Hideyuki Yamashita
Hello Slava,
About 1, when I turned on "CONFIG_RTE_LIBRTE_MLX5_PMD=y" it worked. About 2, I used the latest dpdk-next-net, creating flow for entag VLAN was successful as following:
Configuring Port 0 (socket 0)
Port 0: B8:59:9F:C1:4A:CE
Configuring Port 1 (socket 0)
Port 1: B8:59:9F:C1:4A:CF
Checking link statuses...
Done
testpmd> flow create 0 egress group 1 pattern eth src is BB:BB:BB:BB:BB:BB / end actions of_push_vlan ethertype 0x8100 / of_set_vlan_vid vlan_vid 100 / of_set_vlan_pcp vlan_pcp 3 / end Flow rule #0 created
testpmd> flow create 0 egress group 0 pattern eth
dst [TOKEN]: destination MAC
src [TOKEN]: source MAC
type [TOKEN]: EtherType
/ [TOKEN]: specify next pattern item
testpmd> flow create 0 egress group 0 pattern eth / a
any [TOKEN]: match any protocol for the current layer
arp_eth_ipv4 [TOKEN]: match ARP header for Ethernet/IPv4
testpmd> flow create 0 egress group 0 pattern eth / end actions jump group 1
Bad arguments
testpmd> flow create 0 egress group 0 pattern eth / end actions jump group 1 / end
Flow rule #1 created
In short, my questions resolved!
Thanks!
BR,
Hideyuki Yamashita
NTT TechnoCross
Quoted 344 lines
Hi, Hideyuki
Quoted 4 lines
1. As you pointed out, it was configuration issue (
CONFIG_RTE_LIBRTE_MLX5_DEBUG=y)!
When I turned out the configuration, 19.11 rc1 recognized Connect-X5 corrcetly.No-no, it is not configuration, this just enables debug features and Is helpful to locate the reason why ConnectX-5 was not detected on your setup. In release product, of coarse, the
CONFIG_RTE_LIBRTE_MLX5_DEBUGmust be "n"
Or was it just missed "CONFIG_RTE_LIBRTE_MLX5_PMD=y" ?Quoted 5 lines
Thanks for your help.
2. How about the question I put in my previouse email (how to create flow for entag VLAN tag on not-tagged packet)
I'm sorry, I did not express my answer in clear way.
This issue is fixed, now you entagging Flow can be created successfully, I rechecked.Now it works:
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
testpmd> flow create 0 egress group 1 pattern eth src is testpmd> BB:BB:BB:BB:BB:BB / end actions
of_push_vlanethertype testpmd>0x8100/of_set_vlan_vidvlan_vid100 /of_set_vlan_pcptestpmd>vlan_pcp3 / endPlease, take (coming on Friday) 19.11rc2 and try.
With best regards, Slava
Quoted 310 lines
Thanks again.
BR,
Hideyuki Yamashita
NTT TechnoCrossQuoted 12 lines
Hi, Hideyuki
Quoted 10 lines
-----Original Message-----
From: Hideyuki Yamashita <[email protected]>
Sent: Wednesday, November 6, 2019 13:04
To: Slava Ovsiienko <[email protected]>
Cc: [email protected]
Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on VLAN headerDear Slava,
Quoted 8 lines
Quoted 4 lines
Additional question.
When I use testpmd in dpdk-next-net repo, it works in general. However when I use dpdk19.11-rc1, testpmd does not recognize connectX-5 NIC.It is quite strange, it should be, ConnectX-5 is base Mellanox NIC now. Could you, please:
- configure "CONFIG_RTE_LIBRTE_MLX5_DEBUG=y" in./config/common_base
Quoted 40 lines
- reconfigure DPDK and rebuild testpmd
- run testpmd with --log-level=99 --log-level=pmd.net.mlx5:8 (before -- separator)
- see (and provide) the log, where it drops theeth_devobject spawningQuoted 2 lines
Is it correct that ConnectX-5 will be recognized in 19.11 release finally?
It should be recognized in 19.11rc1, possible we have some configuration issue, let's have a look at.
Quoted 27 lines
If yes, which release candidate the necessary change will be mergerd and available?
BR,
Hideyuki Yamashita
NTT TechnoCrossQuoted 19 lines
Dear Slava,
Thanks for your response.
Inputting other flows failed while some flows are created. Please help on the following two cases.
1) I would like to detag vlan tag which has specific destionation MAC address. No condition about vlan id value.
testpmd> flow create 0 ingress group 1 pattern eth dst is testpmd> AA:AA:AA:AA:AA:AA / vlan / any / end actions
of_pop_vlantestpmd> / queue index 1 / end
Caught error type 10 (item specification): VLAN cannot be empty:
Invalid argument
testpmd> flow create 0 ingress group 1 pattern eth dst is testpmd> AA:AA:AA:AA:AA:AA / vlan vid is 100 / end actions testpmd>of_pop_vlan/ queue index 1 / end
Flow rule #0 createdQuoted 2 lines
I'll check, possible this validation reject is imposed by HW limitations - it requires the VLAN header presence and (IIRC) VID match. If
possible - we'll fix.
Quoted 13 lines
Quoted 4 lines
Quoted 4 lines
2) I would like to entag vlan tag
Quoted 8 lines
Quoted 8 lines
testpmd> flow create 0 egress group 1 pattern eth src is testpmd> BB:BB:BB:BB:BB:BB / end actions
of_push_vlanethertype testpmd>0x8100/of_set_vlan_vidvlan_vid100 /of_set_vlan_pcptestpmd>vlan_pcp3 / end
Caught error type 16 (specific action): cause:0x7ffdc9d98348, match on VLAN is required in order to set VLAN VID: Invalid argumentQuoted 2 lines
It is fixed (and patch Is already merged -
https://eur03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fpatch
Quoted 1 line
es.dpdk.org%2Fpatch%2F62295%2F&data=02%7C01%7Cviacheslavo%4 0mellan
Quoted 1 line
ox.com%7Ca17dfb64b04f430237ff08d7633d7346%7Ca652971c7d2e4d9ba6
a4d14925Quoted 1 line
6f461b%7C0%7C1%7C637086987908448715&sdata=Uvi1bWYT%2BaHo TSHkQ8AF6%
Quoted 2 lines
2FnTx%2FP5UrMqtZ3gAzjqGAA%3D&reserved=0),
let's try coming 19.11rc2. I inserted your Flow successfully on currentUpstream..
Quoted 50 lines
With best regards, Slava
Quoted 45 lines
Quoted 30 lines
Thanks!
BR,
Hideyuki Yamashita
NTT TechnoCrossQuoted 22 lines
Quoted 8 lines
-----Original Message-----
From: Hideyuki Yamashita <[email protected]>
Sent: Thursday, October 31, 2019 11:52
To: Slava Ovsiienko <[email protected]>
Cc: [email protected]
Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on VLAN headerQuoted 4 lines
Dear Slava,
Your guess is corrrect.
When I put flow into Connect-X5, it was successful.Very nice.
Quoted 2 lines
General question.
As we know - general questions are the most hard ones to answer ??.
Quoted 1 line
Are there any way to input flow to ConnectX-4?
As usual - with RTE flow API. Just omit
dv_flow_en, or specify dv_flow_en=0 and mlx5 PMD will handle RTE flow API via Verbs engine,supported by ConnectX-4.
Quoted 6 lines
Quoted 6 lines
Quoted 3 lines
In another word, are there any way to activate Verb? And which type of flow is supported in Verb?
Please, see
flow_verbs_validate()routine in themlx5_flow_verbs.c, it shows which RTE flow items and actions are actually supported byVerbs.
Quoted 7 lines
Quoted 7 lines
With best regards, Slava
Quoted 3 lines
-----------------------------------------------------------
tx_h-yamashita@R730n10:~/dpdk-next-net/x86_64-native-linuxapp-
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
gcc/app$ sudo ./te stpmd -c
0xF-n 4 -w 04:00.0,dv_flow_en=1--
Quoted 13 lines
Quoted 13 lines
socket-
Quoted 12 lines
Quoted 12 lines
Quoted 12 lines
mem 512,512 --huge-dir=/mnt/h
uge1G --log-level port:8 -- -i --portmask=0x1 --nb-cores=2 --txq=16 --rxq=16 [sudo] password for tx_h-yamashita:
EAL: Detected 48 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket/var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: Probing VFIO support...
EAL: PCI device 0000:04:00.0 on NUMA socket 0
EAL: probe driver: 15b3:1017net_mlx5net_mlx5: mlx5.c:1852:mlx5_dev_spawn(): can't query devx port 1 onQuoted 6 lines
Quoted 6 lines
device
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
mlx5_1Interactive-mode selected
testpmd: create a new mbuf pool <
mbuf_pool_socket_0>:n=171456,
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
size=2176, socke t=0
testpmd: preferred mempool ops selected:ring_mp_mc
testpmd: create a new mbuf pool <mbuf_pool_socket_1>:n=171456,
Quoted 8 lines
Quoted 8 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
size=2176, socke t=1
testpmd: preferred mempool ops selected:ring_mp_mcWarning! port-topology=paired and odd forward ports number, the last
port
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
will p air with itself.
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Configuring Port 0 (socket 0)
Port 0: B8:59:9F:C1:4A:CE
Checking link statuses...
Done
testpmd>
testpmd> flow create 0 ingress group 1 priority 0 pattern eth testpmd> dst is
00:16:3e:2 e:7b:6a / vlan vid is 1480 / end actionsof_pop_vlan/
Quoted 25 lines
Quoted 25 lines
queue
Quoted 24 lines
Quoted 24 lines
Quoted 24 lines
index 0 / end
Flow rule #0 created
testpmd>
--------------------------------------------------------------
----
---------------------------
-----------------BR,
Hideyuki Yamashita
NTT TechnoCrossQuoted 12 lines
Hi, Hideyuki
Quoted 10 lines
-----Original Message-----
From: Hideyuki Yamashita <[email protected]>
Sent: Wednesday, October 30, 2019 12:46
To: Slava Ovsiienko <[email protected]>
Cc: [email protected]
Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on VLAN headerHello Slava,
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 3 lines
Quoted 3 lines
Thanks for your help.
I added magic phrase. with chaging PCI number with proper one in myenv.
Quoted 4 lines
Quoted 4 lines
It changes situation but still result in error.
I used /usertools/dpdk-setup.sh to allocate hugepage
dynamically.
Quoted 11 lines
Quoted 11 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Your help is appreciated.
I think it is getting closer. tx_h-yamashita@R730n10:~/dpdk-next-net/x86_64-native-
linuxapp-
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 5 lines
gcc/app$
sudo ./testpmd -c0xF-n 4 -w 03:00.0,dv_flow_en=1 --socket-mem
512,512 - -huge-dir=/mnt/h uge1G --log-level port:8 -- -i --portmask=0x1 --nb-cores=2Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 3 lines
mlx5 PMD supports two flow engines:
- Verbs, this is legacy one, almost no new features are being added, justbug fixes,
Quoted 2 lines
provides slow rule insertion rate, etc.
- Direct Rules, the new one, all new features are being addedhere.
Quoted 63 lines
Quoted 62 lines
Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
Quoted 6 lines
(We had one more intermediate engine - Direct Verbs, it was dropped, but prefix dv in
dv_flow_enremains ??)Verbs are supported over all NICs - ConnectX-4,ConnectX-4LX, ConnectX-5,
ConnectX-6, etc.
Quoted 4 lines
Direct Rules is supported for NICs starting from ConnectX-5. "dv_flow_en=1" partameter engages Direct Rules, but I see you run testpmd over 03:00.0 which is ConnectX-4, not supporting Direct
Rules.
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Please, run over ConnectX-5 you have on your host.
As for error - it is not related to memory, rdma core just failed to create the group table, because ConnectX-4 does not
support DR.
Quoted 43 lines
Quoted 42 lines
Quoted 41 lines
Quoted 40 lines
With best regards, Slava
Quoted 36 lines
--txq=16 --rxq=16
EAL: Detected 48 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket/var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: Probing VFIO support...
EAL: PCI device 0000:03:00.0 on NUMA socket 0
EAL: probe driver: 15b3:1015net_mlx5net_mlx5: mlx5.c:1852:mlx5_dev_spawn(): can't query devx port
1 on devicemlx5_3Interactive-mode selected
testpmd: create a new mbuf pool <mbuf_pool_socket_0>:
n=171456, size=2176, socket=0
testpmd: preferred mempool ops selected:ring_mp_mc
testpmd: create a new mbuf pool <mbuf_pool_socket_1>:
n=171456, size=2176, socket=1
testpmd: preferred mempool ops selected:ring_mp_mcWarning! port-topology=paired and odd forward ports number, the last port will pair with itself.
Configuring Port 0 (socket 0) Port 0: B8:59:9F:DB:22:20 Checking link statuses...
Done
testpmd> flow create 0 ingress group 1 priority 0 pattern testpmd> eth dst is 00:16:3e:2e:7b:6a / vlan vid is 1480 / testpmd> end actionsof_pop_vlan/ queue index 0 / end Caught error type 1 (cause unspecified): cannot create table:
Cannot allocate memoryBR,
Hideyuki Yamashita
Hello Slava,
As I reported to you, creating flow was successful with Connect-X5. However when I sent packets to the NIC from outer side of the host, I have problem.
[Case 1]
Packet distribution on multi-queue based on dst MAC address.
NIC config:
04:00.0 Mellanox Connect-X5
0.5.00.0 Intel XXV710
testpmd startup param:
sudo ./testpmd -c 1ffff -n 4 --socket-mem=1024,1024 --log-level=10 -w 04:00.0,dv_flow_en=1 -w 05:00.0 -- -i --rxq=16 --txq=16 --disable-rss --pkt-filter-mode=perfect
flow command:
testpmd> flow create 0 ingress pattern eth dst is 11:22:33:44:55:66 / end actions queue index 1 / end Flow rule #0 created
testpmd> flow create 1 ingress pattern eth dst is 11:22:33:44:55:66 type mask 0xffff / end actions queue index 1 / end Flow rule #0 created
Packet reception:(no VLAN tag)
port 0/queue 0: received 1 packets
src=CC:CC:CC:CC:CC:CC - dst=11:22:33:44:55:66 - type=0x0800 - length=60 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_NONFRAG - sw ptype: L2_ETHER L3_IPV4 - l2_len=14 - l3_len=20 - Receive queue=0x0
ol_flags: PKT_RX_L4_CKSUM_UNKNOWN PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
port 1/queue 0: sent 1 packets
src=CC:CC:CC:CC:CC:CC - dst=11:22:33:44:55:66 - type=0x0800 - length=60 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_NONFRAG - sw ptype: L2_ETHER L3_IPV4 - l2_len=14 - l3_len=20 - Send queue=0x0
ol_flags: PKT_RX_L4_CKSUM_UNKNOWN PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
port 1/queue 1: received 1 packets
src=CC:CC:CC:CC:CC:CC - dst=11:22:33:44:55:66 - type=0x0800 - length=60 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_ICMP - sw ptype: L2_ETHER L3_IPV4 - l2_len=14 - l3_len=20 - Receive queue=0x1
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
port 0/queue 1: sent 1 packets
src=CC:CC:CC:CC:CC:CC - dst=11:22:33:44:55:66 - type=0x0800 - length=60 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_ICMP - sw ptype: L2_ETHER L3_IPV4 - l2_len=14 - l3_len=20 - Send queue=0x1
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
Result:
Matched packet queued to queue=0 port=0. Not queue=1, port=0.
Expectation:
When receiving packet which has dst MAC 11:22:33:44:55:66 should be received on queue=1 port=0.
Question:
Why matching packet is NOT enqueued into queue=1 on port=0?
[Case 2]
Packet distribution on multi-queue based on VLAN tag
testpmd startup param:
sudo ./testpmd -c 1ffff -n 4 --socket-mem=1024,1024 --log-level=10 -w 04:00.0,dv_flow_en=1 -w 05:00.0 -- -i --rxq=16 --txq=16 --disable-rss --pkt-filter-mode=perfect
flow command:
flow create 0 ingress group 1 pattern eth / vlan vid is 100 / end actions queue index 1 / of_pop_vlan / end flow create 0 ingress group 0 pattern eth / end actions jump group 1 / end
Packet Reception: (VLAN100)
port 0/queue 1: received 1 packets
src=CC:CC:CC:CC:CC:CC - dst=11:22:33:44:55:66 - type=0x0800 - length=56 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_NONFRAG - sw ptype: L2_ETHER L3_IPV4 - l2_len=14 - l3_len=20 - Receive queue=0x1
ol_flags: PKT_RX_L4_CKSUM_UNKNOWN PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
port 1/queue 1: sent 1 packets
src=CC:CC:CC:CC:CC:CC - dst=11:22:33:44:55:66 - type=0x0800 - length=56 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_NONFRAG - sw ptype: L2_ETHER L3_IPV4 - l2_len=14 - l3_len=20 - Send queue=0x1
ol_flags: PKT_RX_L4_CKSUM_UNKNOWN PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
Result:
Matched packetd queued to queue=1, port=0
Other packet(VLAN101 packet) discarded.
Expectation:
Matched packet queued to queue =1, port=0
Non Matched packet queued to queue=0, port=0
Question:
Is above behavior collect?
What is the default behavior of unmatchedd packets (queue to queue=0 or discard packet)
BR,
Hideyuki Yamashita
NTT TechnoCross
Hello Slava,
Note that I am using the following dpdk rc.
DPDK 19.11 rc-1
BR,
HIdeyuki Yamashita
NTT TechnoCross
Quoted 88 lines
Hello Slava,
As I reported to you, creating flow was successful with Connect-X5. However when I sent packets to the NIC from outer side of the host, I have problem.
[Case 1]
Packet distribution on multi-queue based on dst MAC address.NIC config:
04:00.0 Mellanox Connect-X5
0.5.00.0 Intel XXV710testpmd startup param:
sudo ./testpmd -c 1ffff -n 4 --socket-mem=1024,1024 --log-level=10 -w 04:00.0,dv_flow_en=1 -w 05:00.0 -- -i --rxq=16 --txq=16 --disable-rss --pkt-filter-mode=perfectflow command:
testpmd> flow create 0 ingress pattern eth dst is 11:22:33:44:55:66 / end actions queue index 1 / end Flow rule #0 created
testpmd> flow create 1 ingress pattern eth dst is 11:22:33:44:55:66 type mask0xffff/ end actions queue index 1 / end Flow rule #0 createdPacket reception:(no VLAN tag)
port 0/queue 0: received 1 packets
src=CC:CC:CC:CC:CC:CC - dst=11:22:33:44:55:66 - type=0x0800 - length=60 - nb_segs=1 - hw ptype:L2_ETHERL3_IPV4_EXT_UNKNOWNL4_NONFRAG- sw ptype:L2_ETHERL3_IPV4- l2_len=14 - l3_len=20 - Receive queue=0x0
ol_flags:PKT_RX_L4_CKSUM_UNKNOWNPKT_RX_IP_CKSUM_GOODPKT_RX_OUTER_L4_CKSUM_UNKNOWN
port 1/queue 0: sent 1 packets
src=CC:CC:CC:CC:CC:CC - dst=11:22:33:44:55:66 - type=0x0800 - length=60 - nb_segs=1 - hw ptype:L2_ETHERL3_IPV4_EXT_UNKNOWNL4_NONFRAG- sw ptype:L2_ETHERL3_IPV4- l2_len=14 - l3_len=20 - Send queue=0x0
ol_flags:PKT_RX_L4_CKSUM_UNKNOWNPKT_RX_IP_CKSUM_GOODPKT_RX_OUTER_L4_CKSUM_UNKNOWNport 1/queue 1: received 1 packets
src=CC:CC:CC:CC:CC:CC - dst=11:22:33:44:55:66 - type=0x0800 - length=60 - nb_segs=1 - hw ptype:L2_ETHERL3_IPV4_EXT_UNKNOWNL4_ICMP- sw ptype:L2_ETHERL3_IPV4- l2_len=14 - l3_len=20 - Receive queue=0x1
ol_flags:PKT_RX_L4_CKSUM_GOODPKT_RX_IP_CKSUM_GOODPKT_RX_OUTER_L4_CKSUM_UNKNOWN
port 0/queue 1: sent 1 packets
src=CC:CC:CC:CC:CC:CC - dst=11:22:33:44:55:66 - type=0x0800 - length=60 - nb_segs=1 - hw ptype:L2_ETHERL3_IPV4_EXT_UNKNOWNL4_ICMP- sw ptype:L2_ETHERL3_IPV4- l2_len=14 - l3_len=20 - Send queue=0x1
ol_flags:PKT_RX_L4_CKSUM_GOODPKT_RX_IP_CKSUM_GOODPKT_RX_OUTER_L4_CKSUM_UNKNOWNResult:
Matched packet queued to queue=0 port=0. Not queue=1, port=0.Expectation:
When receiving packet which has dst MAC 11:22:33:44:55:66 should be received on queue=1 port=0.Question:
Why matching packet is NOT enqueued into queue=1 on port=0?[Case 2]
Packet distribution on multi-queue based on VLAN tagtestpmd startup param:
sudo ./testpmd -c 1ffff -n 4 --socket-mem=1024,1024 --log-level=10 -w 04:00.0,dv_flow_en=1 -w 05:00.0 -- -i --rxq=16 --txq=16 --disable-rss --pkt-filter-mode=perfectflow command:
flow create 0 ingress group 1 pattern eth / vlan vid is 100 / end actions queue index 1 /of_pop_vlan/ end flow create 0 ingress group 0 pattern eth / end actions jump group 1 / endPacket Reception: (VLAN100)
port 0/queue 1: received 1 packets
src=CC:CC:CC:CC:CC:CC - dst=11:22:33:44:55:66 - type=0x0800 - length=56 - nb_segs=1 - hw ptype:L2_ETHERL3_IPV4_EXT_UNKNOWNL4_NONFRAG- sw ptype:L2_ETHERL3_IPV4- l2_len=14 - l3_len=20 - Receive queue=0x1
ol_flags:PKT_RX_L4_CKSUM_UNKNOWNPKT_RX_IP_CKSUM_GOODPKT_RX_OUTER_L4_CKSUM_UNKNOWN
port 1/queue 1: sent 1 packets
src=CC:CC:CC:CC:CC:CC - dst=11:22:33:44:55:66 - type=0x0800 - length=56 - nb_segs=1 - hw ptype:L2_ETHERL3_IPV4_EXT_UNKNOWNL4_NONFRAG- sw ptype:L2_ETHERL3_IPV4- l2_len=14 - l3_len=20 - Send queue=0x1
ol_flags:PKT_RX_L4_CKSUM_UNKNOWNPKT_RX_IP_CKSUM_GOODPKT_RX_OUTER_L4_CKSUM_UNKNOWNResult:
Matched packetd queued to queue=1, port=0
Other packet(VLAN101 packet) discarded.Expectation:
Matched packet queued to queue =1, port=0
Non Matched packet queued to queue=0, port=0Question:
Is above behavior collect?
What is the default behavior of unmatchedd packets (queue to queue=0 or discard packet)BR,
Hideyuki Yamashita
NTT TechnoCross
Hi, Hideyuki
The frame in your report is broadcast/multicast. Please, try unicast one. For broadcast we have the ticket, currently issue is under investigation. Anyway, thanks for reporting.
With best regards, Slava
Quoted 118 lines
-----Original Message-----
From: Hideyuki Yamashita <[email protected]>
Sent: Thursday, November 14, 2019 7:02
To: [email protected]
Cc: Slava Ovsiienko <[email protected]>
Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on VLAN headerHello Slava,
As I reported to you, creating flow was successful with Connect-X5. However when I sent packets to the NIC from outer side of the host, I have problem.
[Case 1]
Packet distribution on multi-queue based on dst MAC address.NIC config:
04:00.0 Mellanox Connect-X5
0.5.00.0 Intel XXV710testpmd startup param:
sudo ./testpmd -c 1ffff -n 4 --socket-mem=1024,1024 --log-level=10 -w
04:00.0,dv_flow_en=1 -w 05:00.0 -- -i --rxq=16 --txq=16 --disable-rss --pkt-
filter-mode=perfectflow command:
testpmd> flow create 0 ingress pattern eth dst is 11:22:33:44:55:66 / testpmd> end actions queue index 1 / end
Flow rule #0 created
testpmd> flow create 1 ingress pattern eth dst is 11:22:33:44:55:66 type testpmd> mask0xffff/ end actions queue index 1 / end
Flow rule #0 createdPacket reception:(no VLAN tag)
port 0/queue 0: received 1 packets
src=CC:CC:CC:CC:CC:CC - dst=11:22:33:44:55:66 - type=0x0800 - length=60
- nb_segs=1 - hw ptype:L2_ETHERL3_IPV4_EXT_UNKNOWNL4_NONFRAG- sw ptype:L2_ETHERL3_IPV4- l2_len=14 - l3_len=20 - Receive queue=0x0
ol_flags:PKT_RX_L4_CKSUM_UNKNOWNPKT_RX_IP_CKSUM_GOODPKT_RX_OUTER_L4_CKSUM_UNKNOWNport 1/queue 0: sent 1 packets
src=CC:CC:CC:CC:CC:CC - dst=11:22:33:44:55:66 - type=0x0800 - length=60
- nb_segs=1 - hw ptype:L2_ETHERL3_IPV4_EXT_UNKNOWNL4_NONFRAG- sw ptype:L2_ETHERL3_IPV4- l2_len=14 - l3_len=20 - Send queue=0x0
ol_flags:PKT_RX_L4_CKSUM_UNKNOWNPKT_RX_IP_CKSUM_GOODPKT_RX_OUTER_L4_CKSUM_UNKNOWNport 1/queue 1: received 1 packets
src=CC:CC:CC:CC:CC:CC - dst=11:22:33:44:55:66 - type=0x0800 - length=60
- nb_segs=1 - hw ptype:L2_ETHERL3_IPV4_EXT_UNKNOWNL4_ICMP- sw
ptype:L2_ETHERL3_IPV4- l2_len=14 - l3_len=20 - Receive queue=0x1
ol_flags:PKT_RX_L4_CKSUM_GOODPKT_RX_IP_CKSUM_GOODPKT_RX_OUTER_L4_CKSUM_UNKNOWNport 0/queue 1: sent 1 packets
src=CC:CC:CC:CC:CC:CC - dst=11:22:33:44:55:66 - type=0x0800 - length=60
- nb_segs=1 - hw ptype:L2_ETHERL3_IPV4_EXT_UNKNOWNL4_ICMP- sw
ptype:L2_ETHERL3_IPV4- l2_len=14 - l3_len=20 - Send queue=0x1
ol_flags:PKT_RX_L4_CKSUM_GOODPKT_RX_IP_CKSUM_GOODPKT_RX_OUTER_L4_CKSUM_UNKNOWNResult:
Matched packet queued to queue=0 port=0. Not queue=1, port=0.Expectation:
When receiving packet which has dst MAC 11:22:33:44:55:66 should be received on queue=1 port=0.Question:
Why matching packet is NOT enqueued into queue=1 on port=0?[Case 2]
Packet distribution on multi-queue based on VLAN tagtestpmd startup param:
sudo ./testpmd -c 1ffff -n 4 --socket-mem=1024,1024 --log-level=10 -w
04:00.0,dv_flow_en=1 -w 05:00.0 -- -i --rxq=16 --txq=16 --disable-rss --pkt-
filter-mode=perfectflow command:
flow create 0 ingress group 1 pattern eth / vlan vid is 100 / end actions queue index 1 /of_pop_vlan/ end flow create 0 ingress group 0 pattern eth / end actions jump group 1 / endPacket Reception: (VLAN100)
port 0/queue 1: received 1 packets
src=CC:CC:CC:CC:CC:CC - dst=11:22:33:44:55:66 - type=0x0800 - length=56
- nb_segs=1 - hw ptype:L2_ETHERL3_IPV4_EXT_UNKNOWNL4_NONFRAG- sw ptype:L2_ETHERL3_IPV4- l2_len=14 - l3_len=20 - Receive queue=0x1
ol_flags:PKT_RX_L4_CKSUM_UNKNOWNPKT_RX_IP_CKSUM_GOODPKT_RX_OUTER_L4_CKSUM_UNKNOWNport 1/queue 1: sent 1 packets
src=CC:CC:CC:CC:CC:CC - dst=11:22:33:44:55:66 - type=0x0800 - length=56
- nb_segs=1 - hw ptype:L2_ETHERL3_IPV4_EXT_UNKNOWNL4_NONFRAG- sw ptype:L2_ETHERL3_IPV4- l2_len=14 - l3_len=20 - Send queue=0x1
ol_flags:PKT_RX_L4_CKSUM_UNKNOWNPKT_RX_IP_CKSUM_GOODPKT_RX_OUTER_L4_CKSUM_UNKNOWNResult:
Matched packetd queued to queue=1, port=0 Other packet(VLAN101 packet) discarded.Expectation:
Matched packet queued to queue =1, port=0 Non Matched packet queued to queue=0, port=0Question:
Is above behavior collect?
What is the default behavior of unmatchedd packets (queue to queue=0 or discard packet)BR,
Hideyuki Yamashita
NTT TechnoCross
Hi Slava,
Thanks for your response.
1. Is the bug number is the follwoing?
https://bugs.dpdk.org/show_bug.cgi?id=96
2.I've sent packets using scapy with the follwing script and I think it is unicast ICMP.
How did you thought the packets are broadcast/muticast? Note that I am not familiar with log of testpmd.
----------------------------------------------------------------------------------------------
from scapy.all import *
vlan_vid = 100vlan_prio = 0vlan_id = 0vlan_flg = Truesrc_mac = "CC:CC:CC:CC:CC:CC"dst_mac = "11:22:33:44:55:66"dst_ip = "192.168.200.101"
iface = "p7p1"
pps = 5
loop = 5
def icmp_send():
ls(Dot1Q)
if vlan_flg:
pkt = Ether(dst=dst_mac, src=src_mac)/Dot1Q(vlan=vlan_vid, prio=vlan_prio, id=vlan_id)/IP(dst=dst_ip)/ICMP()
else:
pkt = Ether(dst=dst_mac, src=src_mac)/IP(dst=dst_ip)/ICMP()
pkt.show()
sendpfast(pkt, iface=iface, pps=pps, loop=loop, file_cache=True)icmp_send()
-----------------------------------------------------------------------------
Thanks!
BR,
Hideyuki Yamashita
NTT TechnoCross
Quoted 126 lines
Hi, Hideyuki
The frame in your report is broadcast/multicast. Please, try unicast one. For broadcast we have the ticket, currently issue is under investigation. Anyway, thanks for reporting.
With best regards, Slava
Quoted 118 lines
-----Original Message-----
From: Hideyuki Yamashita <[email protected]>
Sent: Thursday, November 14, 2019 7:02
To: [email protected]
Cc: Slava Ovsiienko <[email protected]>
Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on VLAN headerHello Slava,
As I reported to you, creating flow was successful with Connect-X5. However when I sent packets to the NIC from outer side of the host, I have problem.
[Case 1]
Packet distribution on multi-queue based on dst MAC address.NIC config:
04:00.0 Mellanox Connect-X5
0.5.00.0 Intel XXV710testpmd startup param:
sudo ./testpmd -c 1ffff -n 4 --socket-mem=1024,1024 --log-level=10 -w
04:00.0,dv_flow_en=1 -w 05:00.0 -- -i --rxq=16 --txq=16 --disable-rss --pkt-
filter-mode=perfectflow command:
testpmd> flow create 0 ingress pattern eth dst is 11:22:33:44:55:66 / testpmd> end actions queue index 1 / end
Flow rule #0 created
testpmd> flow create 1 ingress pattern eth dst is 11:22:33:44:55:66 type testpmd> mask0xffff/ end actions queue index 1 / end
Flow rule #0 createdPacket reception:(no VLAN tag)
port 0/queue 0: received 1 packets
src=CC:CC:CC:CC:CC:CC - dst=11:22:33:44:55:66 - type=0x0800 - length=60
- nb_segs=1 - hw ptype:L2_ETHERL3_IPV4_EXT_UNKNOWNL4_NONFRAG- sw ptype:L2_ETHERL3_IPV4- l2_len=14 - l3_len=20 - Receive queue=0x0
ol_flags:PKT_RX_L4_CKSUM_UNKNOWNPKT_RX_IP_CKSUM_GOODPKT_RX_OUTER_L4_CKSUM_UNKNOWNport 1/queue 0: sent 1 packets
src=CC:CC:CC:CC:CC:CC - dst=11:22:33:44:55:66 - type=0x0800 - length=60
- nb_segs=1 - hw ptype:L2_ETHERL3_IPV4_EXT_UNKNOWNL4_NONFRAG- sw ptype:L2_ETHERL3_IPV4- l2_len=14 - l3_len=20 - Send queue=0x0
ol_flags:PKT_RX_L4_CKSUM_UNKNOWNPKT_RX_IP_CKSUM_GOODPKT_RX_OUTER_L4_CKSUM_UNKNOWNport 1/queue 1: received 1 packets
src=CC:CC:CC:CC:CC:CC - dst=11:22:33:44:55:66 - type=0x0800 - length=60
- nb_segs=1 - hw ptype:L2_ETHERL3_IPV4_EXT_UNKNOWNL4_ICMP- sw
ptype:L2_ETHERL3_IPV4- l2_len=14 - l3_len=20 - Receive queue=0x1
ol_flags:PKT_RX_L4_CKSUM_GOODPKT_RX_IP_CKSUM_GOODPKT_RX_OUTER_L4_CKSUM_UNKNOWNport 0/queue 1: sent 1 packets
src=CC:CC:CC:CC:CC:CC - dst=11:22:33:44:55:66 - type=0x0800 - length=60
- nb_segs=1 - hw ptype:L2_ETHERL3_IPV4_EXT_UNKNOWNL4_ICMP- sw
ptype:L2_ETHERL3_IPV4- l2_len=14 - l3_len=20 - Send queue=0x1
ol_flags:PKT_RX_L4_CKSUM_GOODPKT_RX_IP_CKSUM_GOODPKT_RX_OUTER_L4_CKSUM_UNKNOWNResult:
Matched packet queued to queue=0 port=0. Not queue=1, port=0.Expectation:
When receiving packet which has dst MAC 11:22:33:44:55:66 should be received on queue=1 port=0.Question:
Why matching packet is NOT enqueued into queue=1 on port=0?[Case 2]
Packet distribution on multi-queue based on VLAN tagtestpmd startup param:
sudo ./testpmd -c 1ffff -n 4 --socket-mem=1024,1024 --log-level=10 -w
04:00.0,dv_flow_en=1 -w 05:00.0 -- -i --rxq=16 --txq=16 --disable-rss --pkt-
filter-mode=perfectflow command:
flow create 0 ingress group 1 pattern eth / vlan vid is 100 / end actions queue index 1 /of_pop_vlan/ end flow create 0 ingress group 0 pattern eth / end actions jump group 1 / endPacket Reception: (VLAN100)
port 0/queue 1: received 1 packets
src=CC:CC:CC:CC:CC:CC - dst=11:22:33:44:55:66 - type=0x0800 - length=56
- nb_segs=1 - hw ptype:L2_ETHERL3_IPV4_EXT_UNKNOWNL4_NONFRAG- sw ptype:L2_ETHERL3_IPV4- l2_len=14 - l3_len=20 - Receive queue=0x1
ol_flags:PKT_RX_L4_CKSUM_UNKNOWNPKT_RX_IP_CKSUM_GOODPKT_RX_OUTER_L4_CKSUM_UNKNOWNport 1/queue 1: sent 1 packets
src=CC:CC:CC:CC:CC:CC - dst=11:22:33:44:55:66 - type=0x0800 - length=56
- nb_segs=1 - hw ptype:L2_ETHERL3_IPV4_EXT_UNKNOWNL4_NONFRAG- sw ptype:L2_ETHERL3_IPV4- l2_len=14 - l3_len=20 - Send queue=0x1
ol_flags:PKT_RX_L4_CKSUM_UNKNOWNPKT_RX_IP_CKSUM_GOODPKT_RX_OUTER_L4_CKSUM_UNKNOWNResult:
Matched packetd queued to queue=1, port=0 Other packet(VLAN101 packet) discarded.Expectation:
Matched packet queued to queue =1, port=0 Non Matched packet queued to queue=0, port=0Question:
Is above behavior collect?
What is the default behavior of unmatchedd packets (queue to queue=0 or discard packet)BR,
Hideyuki Yamashita
NTT TechnoCross
Hi
This bit on in dst mac address = "01:00:00:00:00:00" means the packets is L2 multicast packet.
When you run Testpmd application the multicast configuration is forwarded to the device by default.
So, you have 2 rules:
The default which try to match on the above dst mac bit and to do RSS action for all the queues. Your rule which try to match on dst mac 11:22:33:44:55:66 (the multicast bit is on) and more and to send it to queue 1.
So, your flow is sub flow of the default flow.
Since the current behavior in our driver is to put all the multicast rules in the same priority - the behavior for the case is unpredictable:
1. you can get the packet twice for the 2 rules.
2. you can get the packet onl for the default RSS action.
3. you can get the packet only on queue 1 as in your rule.
Unfortunately, here, you got option 1 I think (you get the packet twice in your application).
This behavior in our driver to put the 2 rules in same behavior is in discussion by us - maybe it will be changed later.
To workaround the issue:
1. do not configure the default rules (run with --flow-isolate-all in testpmd cmdline).
2. do not configure 2 different multicast rules (even with different priorities).
Enjoy, let me know if you need more help....
Matan
From: Hideyuki Yamashita
Quoted 192 lines
Hi Slava,
Thanks for your response.
1. Is the bug number is the follwoing?
https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fbugs.
dpdk.org%2Fshow_bug.cgi%3Fid%3D96&data=02%7C01%7Cmatan%40 mellanox.com%7Ce10ce5ee0f8f4350c6a508d76bee3a97%7Ca652971c7d2e4d 9ba6a4d149256f461b%7C0%7C0%7C637096543244123210&sdata=V3V21 gwJExHt7mkg0sAEwW%2FLTCIbJEkHznNtUCVkN%2BA%3D&reserved=02.I've sent packets using scapy with the follwing script and I think it is unicast ICMP.
How did you thought the packets are broadcast/muticast?
Note that I am not familiar with log of testpmd.----------------------------------------------------------------------------------------------
from scapy.all import *
vlan_vid= 100vlan_prio= 0vlan_id= 0vlan_flg= Truesrc_mac= "CC:CC:CC:CC:CC:CC"dst_mac= "11:22:33:44:55:66"dst_ip= "192.168.200.101"
iface = "p7p1"
pps = 5
loop = 5def
icmp_send():
ls(Dot1Q)
ifvlan_flg:
pkt =Ether(dst=dst_mac, src=src_mac)/Dot1Q(vlan=vlan_vid,
prio=vlan_prio, id=vlan_id)/IP(dst=dst_ip)/ICMP()else: pkt = Ether(dst=dst_mac, src=src_mac)/IP(dst=dst_ip)/ICMP() pkt.show() sendpfast(pkt, iface=iface, pps=pps, loop=loop, file_cache=True)
icmp_send()
-----------------------------------------------------------------------------Thanks!
BR,
Hideyuki Yamashita
NTT TechnoCrossQuoted 33 lines
Hi, Hideyuki
The frame in your report is broadcast/multicast. Please, try unicast one. For broadcast we have the ticket, currently issue is under investigation. Anyway, thanks for reporting.
With best regards, Slava
Quoted 25 lines
-----Original Message-----
From: Hideyuki Yamashita <[email protected]>
Sent: Thursday, November 14, 2019 7:02
To: [email protected]
Cc: Slava Ovsiienko <[email protected]>
Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on VLAN headerHello Slava,
As I reported to you, creating flow was successful with Connect-X5. However when I sent packets to the NIC from outer side of the host, I have problem.
[Case 1]
Packet distribution on multi-queue based on dst MAC address.NIC config:
04:00.0 Mellanox Connect-X5
0.5.00.0 Intel XXV710testpmd startup param:
sudo ./testpmd -c 1ffff -n 4 --socket-mem=1024,1024 --log-level=10 -w
04:00.0,dv_flow_en=1 -w 05:00.0 -- -i --rxq=16 --txq=16 --disable-rss --pkt-
Quoted 10 lines
Quoted 10 lines
filter-mode=perfect
flow command:
testpmd> flow create 0 ingress pattern eth dst is 11:22:33:44:55:66 testpmd> / end actions queue index 1 / end
Flow rule #0 created
testpmd> flow create 1 ingress pattern eth dst is 11:22:33:44:55:66 testpmd> type mask0xffff/ end actions queue index 1 / end Flow rule #0 createdQuoted 5 lines
Quoted 5 lines
Packet reception:(no VLAN tag)
port 0/queue 0: received 1 packets
src=CC:CC:CC:CC:CC:CC - dst=11:22:33:44:55:66 - type=0x0800 -
length=60
- nb_segs=1 - hw ptype:L2_ETHERL3_IPV4_EXT_UNKNOWN
L4_NONFRAG-Quoted 6 lines
Quoted 6 lines
sw ptype:
L2_ETHERL3_IPV4- l2_len=14 - l3_len=20 - Receive queue=0x0
ol_flags:PKT_RX_L4_CKSUM_UNKNOWNPKT_RX_IP_CKSUM_GOODPKT_RX_OUTER_L4_CKSUM_UNKNOWNport 1/queue 0: sent 1 packets
src=CC:CC:CC:CC:CC:CC - dst=11:22:33:44:55:66 - type=0x0800 -
length=60
- nb_segs=1 - hw ptype:L2_ETHERL3_IPV4_EXT_UNKNOWN
L4_NONFRAG-Quoted 8 lines
Quoted 8 lines
sw ptype:
L2_ETHERL3_IPV4- l2_len=14 - l3_len=20 - Send queue=0x0
ol_flags:PKT_RX_L4_CKSUM_UNKNOWNPKT_RX_IP_CKSUM_GOODPKT_RX_OUTER_L4_CKSUM_UNKNOWNport 1/queue 1: received 1 packets
src=CC:CC:CC:CC:CC:CC - dst=11:22:33:44:55:66 - type=0x0800 -
length=60
- nb_segs=1 - hw ptype:L2_ETHERL3_IPV4_EXT_UNKNOWNL4_ICMP-sw
Quoted 6 lines
Quoted 6 lines
ptype:
L2_ETHERL3_IPV4- l2_len=14 - l3_len=20 - Receive queue=0x1
ol_flags:PKT_RX_L4_CKSUM_GOODPKT_RX_IP_CKSUM_GOODPKT_RX_OUTER_L4_CKSUM_UNKNOWNport 0/queue 1: sent 1 packets
src=CC:CC:CC:CC:CC:CC - dst=11:22:33:44:55:66 - type=0x0800 -
length=60
- nb_segs=1 - hw ptype:L2_ETHERL3_IPV4_EXT_UNKNOWNL4_ICMP-sw
Quoted 15 lines
Quoted 15 lines
ptype:
L2_ETHERL3_IPV4- l2_len=14 - l3_len=20 - Send queue=0x1
ol_flags:PKT_RX_L4_CKSUM_GOODPKT_RX_IP_CKSUM_GOODPKT_RX_OUTER_L4_CKSUM_UNKNOWNResult:
Matched packet queued to queue=0 port=0. Not queue=1, port=0.Expectation:
When receiving packet which has dst MAC 11:22:33:44:55:66 should be received on queue=1 port=0.Question:
Why matching packet is NOT enqueued into queue=1 on port=0?Quoted 6 lines
Quoted 6 lines
[Case 2]
Packet distribution on multi-queue based on VLAN tagtestpmd startup param:
sudo ./testpmd -c 1ffff -n 4 --socket-mem=1024,1024 --log-level=10 -w
04:00.0,dv_flow_en=1 -w 05:00.0 -- -i --rxq=16 --txq=16 --disable-rss --pkt-
Quoted 7 lines
Quoted 7 lines
filter-mode=perfect
flow command:
flow create 0 ingress group 1 pattern eth / vlan vid is 100 / end actions queue index 1 /of_pop_vlan/ end flow create 0 ingress group 0 pattern eth / end actions jump group 1 / endQuoted 5 lines
Quoted 5 lines
Packet Reception: (VLAN100)
port 0/queue 1: received 1 packets
src=CC:CC:CC:CC:CC:CC - dst=11:22:33:44:55:66 - type=0x0800 -
length=56
- nb_segs=1 - hw ptype:L2_ETHERL3_IPV4_EXT_UNKNOWN
L4_NONFRAG-Quoted 6 lines
Quoted 6 lines
sw ptype:
L2_ETHERL3_IPV4- l2_len=14 - l3_len=20 - Receive queue=0x1
ol_flags:PKT_RX_L4_CKSUM_UNKNOWNPKT_RX_IP_CKSUM_GOODPKT_RX_OUTER_L4_CKSUM_UNKNOWNport 1/queue 1: sent 1 packets
src=CC:CC:CC:CC:CC:CC - dst=11:22:33:44:55:66 - type=0x0800 -
length=56
- nb_segs=1 - hw ptype:L2_ETHERL3_IPV4_EXT_UNKNOWN
L4_NONFRAG-Quoted 10 lines
Quoted 10 lines
sw ptype:
L2_ETHERL3_IPV4- l2_len=14 - l3_len=20 - Send queue=0x1
ol_flags:PKT_RX_L4_CKSUM_UNKNOWNPKT_RX_IP_CKSUM_GOODPKT_RX_OUTER_L4_CKSUM_UNKNOWNResult:
Matched packetd queued to queue=1, port=0 Other packet(VLAN101 packet) discarded.Expectation:
Matched packet queued to queue =1, port=0 Non Matched packetqueued
Quoted 15 lines
Quoted 15 lines
to queue=0, port=0
Question:
Is above behavior collect?
What is the default behavior of unmatchedd packets (queue to queue=0 or discard packet)BR,
Hideyuki Yamashita
NTT TechnoCross
Hello Matan and Slava,
Thanks for your quick response.
1. What you were saying is correct.
When I create flow with dst mac 10:22:33:44:55:66 instead of
11:22:33:44:55:66, received packets are queued to specified queue.
Thanks for your advice!
Q1. What is the problem with broadcast/multicast address? Q2. What is the bug number on Bugzilla of DPDK?
Q3. What is the default behavior of unmatched packets? Discard packet or queue those to default queue(e.g. queue=0)?
When I tested packet distribution with vlan id, unmatched packets looked discarded..
I would like to know what is the default handling.
Thanks!
Best Regards,
Hideyuki Yamashita
NTT TechnoCross
Quoted 223 lines
Hi
This bit on in dst mac address = "01:00:00:00:00:00" means the packets is L2 multicast packet.
When you run Testpmd application the multicast configuration is forwarded to the device by default.
So, you have 2 rules:
The default which try to match on the above dst mac bit and to do RSS action for all the queues. Your rule which try to match on dst mac 11:22:33:44:55:66 (the multicast bit is on) and more and to send it to queue 1.So, your flow is sub flow of the default flow.
Since the current behavior in our driver is to put all the multicast rules in the same priority - the behavior for the case is unpredictable:
1. you can get the packet twice for the 2 rules.
2. you can get the packet onl for the default RSS action.
3. you can get the packet only on queue 1 as in your rule.Unfortunately, here, you got option 1 I think (you get the packet twice in your application).
This behavior in our driver to put the 2 rules in same behavior is in discussion by us - maybe it will be changed later.
To workaround the issue:
1. do not configure the default rules (run with --flow-isolate-all in testpmd cmdline).
2. do not configure 2 different multicast rules (even with different priorities).Enjoy, let me know if you need more help....
Matan
From: Hideyuki Yamashita
Quoted 192 lines
Hi Slava,
Thanks for your response.
1. Is the bug number is the follwoing?
https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fbugs.
dpdk.org%2Fshow_bug.cgi%3Fid%3D96&data=02%7C01%7Cmatan%40 mellanox.com%7Ce10ce5ee0f8f4350c6a508d76bee3a97%7Ca652971c7d2e4d 9ba6a4d149256f461b%7C0%7C0%7C637096543244123210&sdata=V3V21 gwJExHt7mkg0sAEwW%2FLTCIbJEkHznNtUCVkN%2BA%3D&reserved=02.I've sent packets using scapy with the follwing script and I think it is unicast ICMP.
How did you thought the packets are broadcast/muticast?
Note that I am not familiar with log of testpmd.----------------------------------------------------------------------------------------------
from scapy.all import *
vlan_vid= 100vlan_prio= 0vlan_id= 0vlan_flg= Truesrc_mac= "CC:CC:CC:CC:CC:CC"dst_mac= "11:22:33:44:55:66"dst_ip= "192.168.200.101"
iface = "p7p1"
pps = 5
loop = 5def
icmp_send():
ls(Dot1Q)
ifvlan_flg:
pkt =Ether(dst=dst_mac, src=src_mac)/Dot1Q(vlan=vlan_vid,
prio=vlan_prio, id=vlan_id)/IP(dst=dst_ip)/ICMP()else: pkt = Ether(dst=dst_mac, src=src_mac)/IP(dst=dst_ip)/ICMP() pkt.show() sendpfast(pkt, iface=iface, pps=pps, loop=loop, file_cache=True)
icmp_send()
-----------------------------------------------------------------------------Thanks!
BR,
Hideyuki Yamashita
NTT TechnoCrossQuoted 33 lines
Hi, Hideyuki
The frame in your report is broadcast/multicast. Please, try unicast one. For broadcast we have the ticket, currently issue is under investigation. Anyway, thanks for reporting.
With best regards, Slava
Quoted 25 lines
-----Original Message-----
From: Hideyuki Yamashita <[email protected]>
Sent: Thursday, November 14, 2019 7:02
To: [email protected]
Cc: Slava Ovsiienko <[email protected]>
Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on VLAN headerHello Slava,
As I reported to you, creating flow was successful with Connect-X5. However when I sent packets to the NIC from outer side of the host, I have problem.
[Case 1]
Packet distribution on multi-queue based on dst MAC address.NIC config:
04:00.0 Mellanox Connect-X5
0.5.00.0 Intel XXV710testpmd startup param:
sudo ./testpmd -c 1ffff -n 4 --socket-mem=1024,1024 --log-level=10 -w
04:00.0,dv_flow_en=1 -w 05:00.0 -- -i --rxq=16 --txq=16 --disable-rss --pkt-
Quoted 10 lines
Quoted 10 lines
filter-mode=perfect
flow command:
testpmd> flow create 0 ingress pattern eth dst is 11:22:33:44:55:66 testpmd> / end actions queue index 1 / end
Flow rule #0 created
testpmd> flow create 1 ingress pattern eth dst is 11:22:33:44:55:66 testpmd> type mask0xffff/ end actions queue index 1 / end Flow rule #0 createdQuoted 5 lines
Quoted 5 lines
Packet reception:(no VLAN tag)
port 0/queue 0: received 1 packets
src=CC:CC:CC:CC:CC:CC - dst=11:22:33:44:55:66 - type=0x0800 -
length=60
- nb_segs=1 - hw ptype:L2_ETHERL3_IPV4_EXT_UNKNOWN
L4_NONFRAG-Quoted 6 lines
Quoted 6 lines
sw ptype:
L2_ETHERL3_IPV4- l2_len=14 - l3_len=20 - Receive queue=0x0
ol_flags:PKT_RX_L4_CKSUM_UNKNOWNPKT_RX_IP_CKSUM_GOODPKT_RX_OUTER_L4_CKSUM_UNKNOWNport 1/queue 0: sent 1 packets
src=CC:CC:CC:CC:CC:CC - dst=11:22:33:44:55:66 - type=0x0800 -
length=60
- nb_segs=1 - hw ptype:L2_ETHERL3_IPV4_EXT_UNKNOWN
L4_NONFRAG-Quoted 8 lines
Quoted 8 lines
sw ptype:
L2_ETHERL3_IPV4- l2_len=14 - l3_len=20 - Send queue=0x0
ol_flags:PKT_RX_L4_CKSUM_UNKNOWNPKT_RX_IP_CKSUM_GOODPKT_RX_OUTER_L4_CKSUM_UNKNOWNport 1/queue 1: received 1 packets
src=CC:CC:CC:CC:CC:CC - dst=11:22:33:44:55:66 - type=0x0800 -
length=60
- nb_segs=1 - hw ptype:L2_ETHERL3_IPV4_EXT_UNKNOWNL4_ICMP-sw
Quoted 6 lines
Quoted 6 lines
ptype:
L2_ETHERL3_IPV4- l2_len=14 - l3_len=20 - Receive queue=0x1
ol_flags:PKT_RX_L4_CKSUM_GOODPKT_RX_IP_CKSUM_GOODPKT_RX_OUTER_L4_CKSUM_UNKNOWNport 0/queue 1: sent 1 packets
src=CC:CC:CC:CC:CC:CC - dst=11:22:33:44:55:66 - type=0x0800 -
length=60
- nb_segs=1 - hw ptype:L2_ETHERL3_IPV4_EXT_UNKNOWNL4_ICMP-sw
Quoted 15 lines
Quoted 15 lines
ptype:
L2_ETHERL3_IPV4- l2_len=14 - l3_len=20 - Send queue=0x1
ol_flags:PKT_RX_L4_CKSUM_GOODPKT_RX_IP_CKSUM_GOODPKT_RX_OUTER_L4_CKSUM_UNKNOWNResult:
Matched packet queued to queue=0 port=0. Not queue=1, port=0.Expectation:
When receiving packet which has dst MAC 11:22:33:44:55:66 should be received on queue=1 port=0.Question:
Why matching packet is NOT enqueued into queue=1 on port=0?Quoted 6 lines
Quoted 6 lines
[Case 2]
Packet distribution on multi-queue based on VLAN tagtestpmd startup param:
sudo ./testpmd -c 1ffff -n 4 --socket-mem=1024,1024 --log-level=10 -w
04:00.0,dv_flow_en=1 -w 05:00.0 -- -i --rxq=16 --txq=16 --disable-rss --pkt-
Quoted 7 lines
Quoted 7 lines
filter-mode=perfect
flow command:
flow create 0 ingress group 1 pattern eth / vlan vid is 100 / end actions queue index 1 /of_pop_vlan/ end flow create 0 ingress group 0 pattern eth / end actions jump group 1 / endQuoted 5 lines
Quoted 5 lines
Packet Reception: (VLAN100)
port 0/queue 1: received 1 packets
src=CC:CC:CC:CC:CC:CC - dst=11:22:33:44:55:66 - type=0x0800 -
length=56
- nb_segs=1 - hw ptype:L2_ETHERL3_IPV4_EXT_UNKNOWN
L4_NONFRAG-Quoted 6 lines
Quoted 6 lines
sw ptype:
L2_ETHERL3_IPV4- l2_len=14 - l3_len=20 - Receive queue=0x1
ol_flags:PKT_RX_L4_CKSUM_UNKNOWNPKT_RX_IP_CKSUM_GOODPKT_RX_OUTER_L4_CKSUM_UNKNOWNport 1/queue 1: sent 1 packets
src=CC:CC:CC:CC:CC:CC - dst=11:22:33:44:55:66 - type=0x0800 -
length=56
- nb_segs=1 - hw ptype:L2_ETHERL3_IPV4_EXT_UNKNOWN
L4_NONFRAG-Quoted 10 lines
Quoted 10 lines
sw ptype:
L2_ETHERL3_IPV4- l2_len=14 - l3_len=20 - Send queue=0x1
ol_flags:PKT_RX_L4_CKSUM_UNKNOWNPKT_RX_IP_CKSUM_GOODPKT_RX_OUTER_L4_CKSUM_UNKNOWNResult:
Matched packetd queued to queue=1, port=0 Other packet(VLAN101 packet) discarded.Expectation:
Matched packet queued to queue =1, port=0 Non Matched packetqueued
Quoted 15 lines
Quoted 15 lines
to queue=0, port=0
Question:
Is above behavior collect?
What is the default behavior of unmatchedd packets (queue to queue=0 or discard packet)BR,
Hideyuki Yamashita
NTT TechnoCross
Hello Matan and Slava,
Thanks for your quick response.
How about the following?
BR,
Hideyuki Yamashita
NTT TechnoCross
Quoted 251 lines
Hello Matan and Slava,
Thanks for your quick response.
1. What you were saying is correct.
When I create flow with dst mac 10:22:33:44:55:66 instead of
11:22:33:44:55:66, received packets are queued to specified queue.Thanks for your advice!
Q1. What is the problem with broadcast/multicast address? Q2. What is the bug number on Bugzilla of DPDK?
Q3. What is the default behavior of unmatched packets? Discard packet or queue those to default queue(e.g. queue=0)?When I tested packet distribution with vlan id, unmatched packets looked discarded..
I would like to know what is the default handling.Thanks!
Best Regards,
Hideyuki Yamashita
NTT TechnoCrossQuoted 223 lines
Hi
This bit on in dst mac address = "01:00:00:00:00:00" means the packets is L2 multicast packet.
When you run Testpmd application the multicast configuration is forwarded to the device by default.
So, you have 2 rules:
The default which try to match on the above dst mac bit and to do RSS action for all the queues. Your rule which try to match on dst mac 11:22:33:44:55:66 (the multicast bit is on) and more and to send it to queue 1.So, your flow is sub flow of the default flow.
Since the current behavior in our driver is to put all the multicast rules in the same priority - the behavior for the case is unpredictable:
1. you can get the packet twice for the 2 rules.
2. you can get the packet onl for the default RSS action.
3. you can get the packet only on queue 1 as in your rule.Unfortunately, here, you got option 1 I think (you get the packet twice in your application).
This behavior in our driver to put the 2 rules in same behavior is in discussion by us - maybe it will be changed later.
To workaround the issue:
1. do not configure the default rules (run with --flow-isolate-all in testpmd cmdline).
2. do not configure 2 different multicast rules (even with different priorities).Enjoy, let me know if you need more help....
Matan
From: Hideyuki Yamashita
Quoted 192 lines
Hi Slava,
Thanks for your response.
1. Is the bug number is the follwoing?
https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fbugs.
dpdk.org%2Fshow_bug.cgi%3Fid%3D96&data=02%7C01%7Cmatan%40 mellanox.com%7Ce10ce5ee0f8f4350c6a508d76bee3a97%7Ca652971c7d2e4d 9ba6a4d149256f461b%7C0%7C0%7C637096543244123210&sdata=V3V21 gwJExHt7mkg0sAEwW%2FLTCIbJEkHznNtUCVkN%2BA%3D&reserved=02.I've sent packets using scapy with the follwing script and I think it is unicast ICMP.
How did you thought the packets are broadcast/muticast?
Note that I am not familiar with log of testpmd.----------------------------------------------------------------------------------------------
from scapy.all import *
vlan_vid= 100vlan_prio= 0vlan_id= 0vlan_flg= Truesrc_mac= "CC:CC:CC:CC:CC:CC"dst_mac= "11:22:33:44:55:66"dst_ip= "192.168.200.101"
iface = "p7p1"
pps = 5
loop = 5def
icmp_send():
ls(Dot1Q)
ifvlan_flg:
pkt =Ether(dst=dst_mac, src=src_mac)/Dot1Q(vlan=vlan_vid,
prio=vlan_prio, id=vlan_id)/IP(dst=dst_ip)/ICMP()else: pkt = Ether(dst=dst_mac, src=src_mac)/IP(dst=dst_ip)/ICMP() pkt.show() sendpfast(pkt, iface=iface, pps=pps, loop=loop, file_cache=True)
icmp_send()
-----------------------------------------------------------------------------Thanks!
BR,
Hideyuki Yamashita
NTT TechnoCrossQuoted 33 lines
Hi, Hideyuki
The frame in your report is broadcast/multicast. Please, try unicast one. For broadcast we have the ticket, currently issue is under investigation. Anyway, thanks for reporting.
With best regards, Slava
Quoted 25 lines
-----Original Message-----
From: Hideyuki Yamashita <[email protected]>
Sent: Thursday, November 14, 2019 7:02
To: [email protected]
Cc: Slava Ovsiienko <[email protected]>
Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on VLAN headerHello Slava,
As I reported to you, creating flow was successful with Connect-X5. However when I sent packets to the NIC from outer side of the host, I have problem.
[Case 1]
Packet distribution on multi-queue based on dst MAC address.NIC config:
04:00.0 Mellanox Connect-X5
0.5.00.0 Intel XXV710testpmd startup param:
sudo ./testpmd -c 1ffff -n 4 --socket-mem=1024,1024 --log-level=10 -w
04:00.0,dv_flow_en=1 -w 05:00.0 -- -i --rxq=16 --txq=16 --disable-rss --pkt-
Quoted 10 lines
Quoted 10 lines
filter-mode=perfect
flow command:
testpmd> flow create 0 ingress pattern eth dst is 11:22:33:44:55:66 testpmd> / end actions queue index 1 / end
Flow rule #0 created
testpmd> flow create 1 ingress pattern eth dst is 11:22:33:44:55:66 testpmd> type mask0xffff/ end actions queue index 1 / end Flow rule #0 createdQuoted 5 lines
Quoted 5 lines
Packet reception:(no VLAN tag)
port 0/queue 0: received 1 packets
src=CC:CC:CC:CC:CC:CC - dst=11:22:33:44:55:66 - type=0x0800 -
length=60
- nb_segs=1 - hw ptype:L2_ETHERL3_IPV4_EXT_UNKNOWN
L4_NONFRAG-Quoted 6 lines
Quoted 6 lines
sw ptype:
L2_ETHERL3_IPV4- l2_len=14 - l3_len=20 - Receive queue=0x0
ol_flags:PKT_RX_L4_CKSUM_UNKNOWNPKT_RX_IP_CKSUM_GOODPKT_RX_OUTER_L4_CKSUM_UNKNOWNport 1/queue 0: sent 1 packets
src=CC:CC:CC:CC:CC:CC - dst=11:22:33:44:55:66 - type=0x0800 -
length=60
- nb_segs=1 - hw ptype:L2_ETHERL3_IPV4_EXT_UNKNOWN
L4_NONFRAG-Quoted 8 lines
Quoted 8 lines
sw ptype:
L2_ETHERL3_IPV4- l2_len=14 - l3_len=20 - Send queue=0x0
ol_flags:PKT_RX_L4_CKSUM_UNKNOWNPKT_RX_IP_CKSUM_GOODPKT_RX_OUTER_L4_CKSUM_UNKNOWNport 1/queue 1: received 1 packets
src=CC:CC:CC:CC:CC:CC - dst=11:22:33:44:55:66 - type=0x0800 -
length=60
- nb_segs=1 - hw ptype:L2_ETHERL3_IPV4_EXT_UNKNOWNL4_ICMP-sw
Quoted 6 lines
Quoted 6 lines
ptype:
L2_ETHERL3_IPV4- l2_len=14 - l3_len=20 - Receive queue=0x1
ol_flags:PKT_RX_L4_CKSUM_GOODPKT_RX_IP_CKSUM_GOODPKT_RX_OUTER_L4_CKSUM_UNKNOWNport 0/queue 1: sent 1 packets
src=CC:CC:CC:CC:CC:CC - dst=11:22:33:44:55:66 - type=0x0800 -
length=60
- nb_segs=1 - hw ptype:L2_ETHERL3_IPV4_EXT_UNKNOWNL4_ICMP-sw
Quoted 15 lines
Quoted 15 lines
ptype:
L2_ETHERL3_IPV4- l2_len=14 - l3_len=20 - Send queue=0x1
ol_flags:PKT_RX_L4_CKSUM_GOODPKT_RX_IP_CKSUM_GOODPKT_RX_OUTER_L4_CKSUM_UNKNOWNResult:
Matched packet queued to queue=0 port=0. Not queue=1, port=0.Expectation:
When receiving packet which has dst MAC 11:22:33:44:55:66 should be received on queue=1 port=0.Question:
Why matching packet is NOT enqueued into queue=1 on port=0?Quoted 6 lines
Quoted 6 lines
[Case 2]
Packet distribution on multi-queue based on VLAN tagtestpmd startup param:
sudo ./testpmd -c 1ffff -n 4 --socket-mem=1024,1024 --log-level=10 -w
04:00.0,dv_flow_en=1 -w 05:00.0 -- -i --rxq=16 --txq=16 --disable-rss --pkt-
Quoted 7 lines
Quoted 7 lines
filter-mode=perfect
flow command:
flow create 0 ingress group 1 pattern eth / vlan vid is 100 / end actions queue index 1 /of_pop_vlan/ end flow create 0 ingress group 0 pattern eth / end actions jump group 1 / endQuoted 5 lines
Quoted 5 lines
Packet Reception: (VLAN100)
port 0/queue 1: received 1 packets
src=CC:CC:CC:CC:CC:CC - dst=11:22:33:44:55:66 - type=0x0800 -
length=56
- nb_segs=1 - hw ptype:L2_ETHERL3_IPV4_EXT_UNKNOWN
L4_NONFRAG-Quoted 6 lines
Quoted 6 lines
sw ptype:
L2_ETHERL3_IPV4- l2_len=14 - l3_len=20 - Receive queue=0x1
ol_flags:PKT_RX_L4_CKSUM_UNKNOWNPKT_RX_IP_CKSUM_GOODPKT_RX_OUTER_L4_CKSUM_UNKNOWNport 1/queue 1: sent 1 packets
src=CC:CC:CC:CC:CC:CC - dst=11:22:33:44:55:66 - type=0x0800 -
length=56
- nb_segs=1 - hw ptype:L2_ETHERL3_IPV4_EXT_UNKNOWN
L4_NONFRAG-Quoted 10 lines
Quoted 10 lines
sw ptype:
L2_ETHERL3_IPV4- l2_len=14 - l3_len=20 - Send queue=0x1
ol_flags:PKT_RX_L4_CKSUM_UNKNOWNPKT_RX_IP_CKSUM_GOODPKT_RX_OUTER_L4_CKSUM_UNKNOWNResult:
Matched packetd queued to queue=1, port=0 Other packet(VLAN101 packet) discarded.Expectation:
Matched packet queued to queue =1, port=0 Non Matched packetqueued
Quoted 15 lines
Quoted 15 lines
to queue=0, port=0
Question:
Is above behavior collect?
What is the default behavior of unmatchedd packets (queue to queue=0 or discard packet)BR,
Hideyuki Yamashita
NTT TechnoCross
Hello Matan and Slava,
Thanks for your quick response.
How about the following?
BR,
Hideyuki Yamashita
NTT TechnoCross
Quoted 251 lines
Hello Matan and Slava,
Thanks for your quick response.
1. What you were saying is correct.
When I create flow with dst mac 10:22:33:44:55:66 instead of
11:22:33:44:55:66, received packets are queued to specified queue.Thanks for your advice!
Q1. What is the problem with broadcast/multicast address? Q2. What is the bug number on Bugzilla of DPDK?
Q3. What is the default behavior of unmatched packets? Discard packet or queue those to default queue(e.g. queue=0)?When I tested packet distribution with vlan id, unmatched packets looked discarded..
I would like to know what is the default handling.Thanks!
Best Regards,
Hideyuki Yamashita
NTT TechnoCrossQuoted 223 lines
Hi
This bit on in dst mac address = "01:00:00:00:00:00" means the packets is L2 multicast packet.
When you run Testpmd application the multicast configuration is forwarded to the device by default.
So, you have 2 rules:
The default which try to match on the above dst mac bit and to do RSS action for all the queues. Your rule which try to match on dst mac 11:22:33:44:55:66 (the multicast bit is on) and more and to send it to queue 1.So, your flow is sub flow of the default flow.
Since the current behavior in our driver is to put all the multicast rules in the same priority - the behavior for the case is unpredictable:
1. you can get the packet twice for the 2 rules.
2. you can get the packet onl for the default RSS action.
3. you can get the packet only on queue 1 as in your rule.Unfortunately, here, you got option 1 I think (you get the packet twice in your application).
This behavior in our driver to put the 2 rules in same behavior is in discussion by us - maybe it will be changed later.
To workaround the issue:
1. do not configure the default rules (run with --flow-isolate-all in testpmd cmdline).
2. do not configure 2 different multicast rules (even with different priorities).Enjoy, let me know if you need more help....
Matan
From: Hideyuki Yamashita
Quoted 192 lines
Hi Slava,
Thanks for your response.
1. Is the bug number is the follwoing?
https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fbugs.
dpdk.org%2Fshow_bug.cgi%3Fid%3D96&data=02%7C01%7Cmatan%40 mellanox.com%7Ce10ce5ee0f8f4350c6a508d76bee3a97%7Ca652971c7d2e4d 9ba6a4d149256f461b%7C0%7C0%7C637096543244123210&sdata=V3V21 gwJExHt7mkg0sAEwW%2FLTCIbJEkHznNtUCVkN%2BA%3D&reserved=02.I've sent packets using scapy with the follwing script and I think it is unicast ICMP.
How did you thought the packets are broadcast/muticast?
Note that I am not familiar with log of testpmd.----------------------------------------------------------------------------------------------
from scapy.all import *
vlan_vid= 100vlan_prio= 0vlan_id= 0vlan_flg= Truesrc_mac= "CC:CC:CC:CC:CC:CC"dst_mac= "11:22:33:44:55:66"dst_ip= "192.168.200.101"
iface = "p7p1"
pps = 5
loop = 5def
icmp_send():
ls(Dot1Q)
ifvlan_flg:
pkt =Ether(dst=dst_mac, src=src_mac)/Dot1Q(vlan=vlan_vid,
prio=vlan_prio, id=vlan_id)/IP(dst=dst_ip)/ICMP()else: pkt = Ether(dst=dst_mac, src=src_mac)/IP(dst=dst_ip)/ICMP() pkt.show() sendpfast(pkt, iface=iface, pps=pps, loop=loop, file_cache=True)
icmp_send()
-----------------------------------------------------------------------------Thanks!
BR,
Hideyuki Yamashita
NTT TechnoCrossQuoted 33 lines
Hi, Hideyuki
The frame in your report is broadcast/multicast. Please, try unicast one. For broadcast we have the ticket, currently issue is under investigation. Anyway, thanks for reporting.
With best regards, Slava
Quoted 25 lines
-----Original Message-----
From: Hideyuki Yamashita <[email protected]>
Sent: Thursday, November 14, 2019 7:02
To: [email protected]
Cc: Slava Ovsiienko <[email protected]>
Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on VLAN headerHello Slava,
As I reported to you, creating flow was successful with Connect-X5. However when I sent packets to the NIC from outer side of the host, I have problem.
[Case 1]
Packet distribution on multi-queue based on dst MAC address.NIC config:
04:00.0 Mellanox Connect-X5
0.5.00.0 Intel XXV710testpmd startup param:
sudo ./testpmd -c 1ffff -n 4 --socket-mem=1024,1024 --log-level=10 -w
04:00.0,dv_flow_en=1 -w 05:00.0 -- -i --rxq=16 --txq=16 --disable-rss --pkt-
Quoted 10 lines
Quoted 10 lines
filter-mode=perfect
flow command:
testpmd> flow create 0 ingress pattern eth dst is 11:22:33:44:55:66 testpmd> / end actions queue index 1 / end
Flow rule #0 created
testpmd> flow create 1 ingress pattern eth dst is 11:22:33:44:55:66 testpmd> type mask0xffff/ end actions queue index 1 / end Flow rule #0 createdQuoted 5 lines
Quoted 5 lines
Packet reception:(no VLAN tag)
port 0/queue 0: received 1 packets
src=CC:CC:CC:CC:CC:CC - dst=11:22:33:44:55:66 - type=0x0800 -
length=60
- nb_segs=1 - hw ptype:L2_ETHERL3_IPV4_EXT_UNKNOWN
L4_NONFRAG-Quoted 6 lines
Quoted 6 lines
sw ptype:
L2_ETHERL3_IPV4- l2_len=14 - l3_len=20 - Receive queue=0x0
ol_flags:PKT_RX_L4_CKSUM_UNKNOWNPKT_RX_IP_CKSUM_GOODPKT_RX_OUTER_L4_CKSUM_UNKNOWNport 1/queue 0: sent 1 packets
src=CC:CC:CC:CC:CC:CC - dst=11:22:33:44:55:66 - type=0x0800 -
length=60
- nb_segs=1 - hw ptype:L2_ETHERL3_IPV4_EXT_UNKNOWN
L4_NONFRAG-Quoted 8 lines
Quoted 8 lines
sw ptype:
L2_ETHERL3_IPV4- l2_len=14 - l3_len=20 - Send queue=0x0
ol_flags:PKT_RX_L4_CKSUM_UNKNOWNPKT_RX_IP_CKSUM_GOODPKT_RX_OUTER_L4_CKSUM_UNKNOWNport 1/queue 1: received 1 packets
src=CC:CC:CC:CC:CC:CC - dst=11:22:33:44:55:66 - type=0x0800 -
length=60
- nb_segs=1 - hw ptype:L2_ETHERL3_IPV4_EXT_UNKNOWNL4_ICMP-sw
Quoted 6 lines
Quoted 6 lines
ptype:
L2_ETHERL3_IPV4- l2_len=14 - l3_len=20 - Receive queue=0x1
ol_flags:PKT_RX_L4_CKSUM_GOODPKT_RX_IP_CKSUM_GOODPKT_RX_OUTER_L4_CKSUM_UNKNOWNport 0/queue 1: sent 1 packets
src=CC:CC:CC:CC:CC:CC - dst=11:22:33:44:55:66 - type=0x0800 -
length=60
- nb_segs=1 - hw ptype:L2_ETHERL3_IPV4_EXT_UNKNOWNL4_ICMP-sw
Quoted 15 lines
Quoted 15 lines
ptype:
L2_ETHERL3_IPV4- l2_len=14 - l3_len=20 - Send queue=0x1
ol_flags:PKT_RX_L4_CKSUM_GOODPKT_RX_IP_CKSUM_GOODPKT_RX_OUTER_L4_CKSUM_UNKNOWNResult:
Matched packet queued to queue=0 port=0. Not queue=1, port=0.Expectation:
When receiving packet which has dst MAC 11:22:33:44:55:66 should be received on queue=1 port=0.Question:
Why matching packet is NOT enqueued into queue=1 on port=0?Quoted 6 lines
Quoted 6 lines
[Case 2]
Packet distribution on multi-queue based on VLAN tagtestpmd startup param:
sudo ./testpmd -c 1ffff -n 4 --socket-mem=1024,1024 --log-level=10 -w
04:00.0,dv_flow_en=1 -w 05:00.0 -- -i --rxq=16 --txq=16 --disable-rss --pkt-
Quoted 7 lines
Quoted 7 lines
filter-mode=perfect
flow command:
flow create 0 ingress group 1 pattern eth / vlan vid is 100 / end actions queue index 1 /of_pop_vlan/ end flow create 0 ingress group 0 pattern eth / end actions jump group 1 / endQuoted 5 lines
Quoted 5 lines
Packet Reception: (VLAN100)
port 0/queue 1: received 1 packets
src=CC:CC:CC:CC:CC:CC - dst=11:22:33:44:55:66 - type=0x0800 -
length=56
- nb_segs=1 - hw ptype:L2_ETHERL3_IPV4_EXT_UNKNOWN
L4_NONFRAG-Quoted 6 lines
Quoted 6 lines
sw ptype:
L2_ETHERL3_IPV4- l2_len=14 - l3_len=20 - Receive queue=0x1
ol_flags:PKT_RX_L4_CKSUM_UNKNOWNPKT_RX_IP_CKSUM_GOODPKT_RX_OUTER_L4_CKSUM_UNKNOWNport 1/queue 1: sent 1 packets
src=CC:CC:CC:CC:CC:CC - dst=11:22:33:44:55:66 - type=0x0800 -
length=56
- nb_segs=1 - hw ptype:L2_ETHERL3_IPV4_EXT_UNKNOWN
L4_NONFRAG-Quoted 10 lines
Quoted 10 lines
sw ptype:
L2_ETHERL3_IPV4- l2_len=14 - l3_len=20 - Send queue=0x1
ol_flags:PKT_RX_L4_CKSUM_UNKNOWNPKT_RX_IP_CKSUM_GOODPKT_RX_OUTER_L4_CKSUM_UNKNOWNResult:
Matched packetd queued to queue=1, port=0 Other packet(VLAN101 packet) discarded.Expectation:
Matched packet queued to queue =1, port=0 Non Matched packetqueued
Quoted 15 lines
Quoted 15 lines
to queue=0, port=0
Question:
Is above behavior collect?
What is the default behavior of unmatchedd packets (queue to queue=0 or discard packet)BR,
Hideyuki Yamashita
NTT TechnoCross