Initialise thermal framework and cpufreq earlier during boot
Subsystems (7)
v5 cover Initialise thermal framework and cpufreq earlier during boot
Changes since v4:
- Collect Acks
- Pick the US spelling for 'initialis^Hze' consistently.
Changes since v3:
- Init schedutil governor earlier too
- Simplified changes to thermal_init() error path
- Collects Acks
Changes since v2:
- Missed one patch when posting v2. Respinning.
Changes since v1:
- Completely get rid of netlink support in the thermal framework.
- This changes the early init patch to a single line - change to core_initcall. Changed authorship of patch since it is nothing like the original. Lina, let me know if you feel otherwise.
- I've tested to make sure that the qcom-cpufreq-hw driver continues to work correctly as a module so this won't impact Android's GKI plans.
- Collected Acks
Device boot needs to be as fast as possible while keeping under the thermal envelope. Now that thermal framework is built-in to the kernel, we can initialize it earlier to enable thermal mitigation during boot.
We also need the cpufreq HW drivers to be initialised earlier to act as the cooling devices. This series only converts over the qcom-hw driver to initialize earlier but can be extended to other platforms as well.
Amit Kucheria (6):
thermal: Remove netlink support
thermal: Initialize thermal subsystem earlier
cpufreq: Initialize the governors in core_initcall
cpufreq: Initialize cpufreq-dt driver earlier
clk: qcom: Initialize clock drivers earlier
cpufreq: qcom-hw: Move driver initialization earlier
.../driver-api/thermal/sysfs-api.rst | 26 +---- drivers/clk/qcom/clk-rpmh.c | 2 +- drivers/clk/qcom/gcc-qcs404.c | 2 +- drivers/clk/qcom/gcc-sdm845.c | 2 +- drivers/cpufreq/cpufreq-dt-platdev.c | 2 +- drivers/cpufreq/cpufreq_conservative.c | 2 +- drivers/cpufreq/cpufreq_ondemand.c | 2 +- drivers/cpufreq/cpufreq_performance.c | 2 +- drivers/cpufreq/cpufreq_powersave.c | 2 +- drivers/cpufreq/cpufreq_userspace.c | 2 +- drivers/cpufreq/qcom-cpufreq-hw.c | 2 +- drivers/thermal/thermal_core.c | 103 +----------------- include/linux/thermal.h | 11 -- kernel/sched/cpufreq_schedutil.c | 2 +- 14 files changed, 19 insertions(+), 143 deletions(-)
Signature · 1 line
2.17.1
PATCH v5 1/6 thermal: Remove netlink support
There are no users of netlink messages for thermal inside the kernel. Remove the code and adjust the documentation.
--- .../driver-api/thermal/sysfs-api.rst | 26 ++--- drivers/thermal/thermal_core.c | 101 +----------------- include/linux/thermal.h | 11 -- 3 files changed, 7 insertions(+), 131 deletions(-)
Documentation/driver-api/thermal/sysfs-api.rst +6 -20
@@ -725,24 +725,10 @@ method, the sys I/F structure will be built like this:: |---temp1_input: 37000 |---temp1_crit: 100000 -4. Event Notification +4. Export Symbol APIs ===================== -The framework includes a simple notification mechanism, in the form of a -netlink event. Netlink socket initialization is done during the _init_ -of the framework. Drivers which intend to use the notification mechanism -just need to call thermal_generate_netlink_event() with two arguments viz -(originator, event). The originator is a pointer to struct thermal_zone_device -from where the event has been originated. An integer which represents the -thermal zone device will be used in the message to identify the zone. The -event will be one of:{THERMAL_AUX0, THERMAL_AUX1, THERMAL_CRITICAL, -THERMAL_DEV_FAULT}. Notification can be sent when the current temperature -crosses any of the configured thresholds. - -5. Export Symbol APIs -===================== - -5.1. get_tz_trend +4.1. get_tz_trend ----------------- This function returns the trend of a thermal zone, i.e the rate of change
@@ -751,14 +737,14 @@ are supposed to implement the callback. If they don't, the thermal framework calculated the trend by comparing the previous and the current temperature values. -5.2. get_thermal_instance +4.2. get_thermal_instance ------------------------- This function returns the thermal_instance corresponding to a given {thermal_zone, cooling_device, trip_point} combination. Returns NULL if such an instance does not exist. -5.3. thermal_notify_framework +4.3. thermal_notify_framework ----------------------------- This function handles the trip events from sensor drivers. It starts
@@ -768,14 +754,14 @@ and does actual throttling for other trip points i.e ACTIVE and PASSIVE. The throttling policy is based on the configured platform data; if no platform data is provided, this uses the step_wise throttling policy. -5.4. thermal_cdev_update +4.4. thermal_cdev_update ------------------------ This function serves as an arbitrator to set the state of a cooling device. It sets the cooling device to the deepest cooling state if possible. -6. thermal_emergency_poweroff +5. thermal_emergency_poweroff ============================= On an event of critical trip temperature crossing. Thermal framework
drivers/thermal/thermal_core.c +1 -100
127 lines not on this page · raw message
include/linux/thermal.h +0 -11
@@ -544,15 +544,4 @@ static inline void thermal_notify_framework(struct thermal_zone_device *tz, { }#endif /* CONFIG_THERMAL */ -#if defined(CONFIG_NET ) &&IS_ENABLED (CONFIG_THERMAL ) -extern int thermal_generate_netlink_event (struct thermal_zone_device *tz, -enum events event); -#else -static inline int thermal_generate_netlink_event (struct thermal_zone_device *tz, -enum events event) -{ -return 0 ; -} -#endif -#endif /* __THERMAL_H__ */
Signature · 1 line
2.17.1
PATCH v5 2/6 thermal: Initialize thermal subsystem earlier
In reply to Amit KucheriaNow that the thermal framework is built-in, in order to facilitate thermal mitigation as early as possible in the boot cycle, move the thermal framework initialization to core_initcall.
--- drivers/thermal/thermal_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/thermal/thermal_core.c +1 -1
@@ -1537,4 +1537,4 @@ static int __init thermal_init(void)mutex_destroy (&poweroff_lock);return result; } -fs_initcall (thermal_init); +core_initcall (thermal_init);
Signature · 1 line
2.17.1
PATCH v5 3/6 cpufreq: Initialize the governors in core_initcall
In reply to Amit KucheriaInitialize the cpufreq governors earlier to allow for earlier performance control during the boot process.
--- drivers/cpufreq/cpufreq_conservative.c | 2 +- drivers/cpufreq/cpufreq_ondemand.c | 2 +- drivers/cpufreq/cpufreq_performance.c | 2 +- drivers/cpufreq/cpufreq_powersave.c | 2 +- drivers/cpufreq/cpufreq_userspace.c | 2 +- kernel/sched/cpufreq_schedutil.c | 2 +- 6 files changed, 6 insertions(+), 6 deletions(-)
drivers/cpufreq/cpufreq_conservative.c +1 -1
@@ -346,7 +346,7 @@ struct cpufreq_governor *cpufreq_default_governor(void) return CPU_FREQ_GOV_CONSERVATIVE; } -fs_initcall (cpufreq_gov_dbs_init); +core_initcall (cpufreq_gov_dbs_init);#else module_init (cpufreq_gov_dbs_init);#endif
drivers/cpufreq/cpufreq_ondemand.c +1 -1
@@ -483,7 +483,7 @@ struct cpufreq_governor *cpufreq_default_governor(void) return CPU_FREQ_GOV_ONDEMAND; } -fs_initcall (cpufreq_gov_dbs_init); +core_initcall (cpufreq_gov_dbs_init);#else module_init (cpufreq_gov_dbs_init);#endif
drivers/cpufreq/cpufreq_performance.c +1 -1
@@ -50,5 +50,5 @@ MODULE_AUTHOR("Dominik Brodowski <[email protected]>");MODULE_DESCRIPTION ("CPUfreq policy governor 'performance'" );MODULE_LICENSE ("GPL" ); -fs_initcall (cpufreq_gov_performance_init); +core_initcall (cpufreq_gov_performance_init);module_exit (cpufreq_gov_performance_exit);
drivers/cpufreq/cpufreq_powersave.c +1 -1
@@ -43,7 +43,7 @@ struct cpufreq_governor *cpufreq_default_governor(void) return &cpufreq_gov_powersave; } -fs_initcall (cpufreq_gov_powersave_init); +core_initcall (cpufreq_gov_powersave_init);#else module_init (cpufreq_gov_powersave_init);#endif
drivers/cpufreq/cpufreq_userspace.c +1 -1
@@ -147,7 +147,7 @@ struct cpufreq_governor *cpufreq_default_governor(void) return &cpufreq_gov_userspace; } -fs_initcall (cpufreq_gov_userspace_init); +core_initcall (cpufreq_gov_userspace_init);#else module_init (cpufreq_gov_userspace_init);#endif
kernel/sched/cpufreq_schedutil.c +1 -1
@@ -915,7 +915,7 @@ static int __init sugov_register(void) {return cpufreq_register_governor (&schedutil_gov); } -fs_initcall (sugov_register); +core_initcall (sugov_register);#ifdef CONFIG_ENERGY_MODEL extern bool sched_energy_update;
Signature · 1 line
2.17.1
PATCH v5 4/6 cpufreq: Initialize cpufreq-dt driver earlier
In reply to Amit KucheriaThis allows HW drivers that depend on cpufreq-dt to initialize earlier.
--- drivers/cpufreq/cpufreq-dt-platdev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/cpufreq/cpufreq-dt-platdev.c +1 -1
@@ -180,4 +180,4 @@ static int __init cpufreq_dt_platdev_init(void)-1 , data, sizeof(struct cpufreq_dt_platform_data))); } -device_initcall (cpufreq_dt_platdev_init); +core_initcall (cpufreq_dt_platdev_init);
Signature · 1 line
2.17.1
PATCH v5 5/6 clk: qcom: Initialize clock drivers earlier
In reply to Amit KucheriaInitialize the clock drivers on sdm845 and qcs404 in core_initcall so we can have earlier access to cpufreq during booting.
--- drivers/clk/qcom/clk-rpmh.c | 2 +- drivers/clk/qcom/gcc-qcs404.c | 2 +- drivers/clk/qcom/gcc-sdm845.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-)
drivers/clk/qcom/clk-rpmh.c +1 -1
@@ -487,7 +487,7 @@ static int __init clk_rpmh_init(void) {return platform_driver_register (&clk_rpmh_driver); } -subsys_initcall (clk_rpmh_init); +core_initcall (clk_rpmh_init); static void __exit clk_rpmh_exit(void) {
drivers/clk/qcom/gcc-qcs404.c +1 -1
@@ -2855,7 +2855,7 @@ static int __init gcc_qcs404_init(void) {return platform_driver_register (&gcc_qcs404_driver); } -subsys_initcall (gcc_qcs404_init); +core_initcall (gcc_qcs404_init); static void __exit gcc_qcs404_exit(void) {
drivers/clk/qcom/gcc-sdm845.c +1 -1
@@ -3628,7 +3628,7 @@ static int __init gcc_sdm845_init(void) {return platform_driver_register (&gcc_sdm845_driver); } -subsys_initcall (gcc_sdm845_init); +core_initcall (gcc_sdm845_init); static void __exit gcc_sdm845_exit(void) {
Signature · 1 line
2.17.1
PATCH v5 6/6 cpufreq: qcom-hw: Move driver initialization earlier
In reply to Amit KucheriaAllow qcom-hw driver to initialize right after the cpufreq and thermal subsystems are initialised in core_initcall so we get earlier access to thermal mitigation.
--- drivers/cpufreq/qcom-cpufreq-hw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/cpufreq/qcom-cpufreq-hw.c +1 -1
@@ -334,7 +334,7 @@ static int __init qcom_cpufreq_hw_init(void) {return platform_driver_register (&qcom_cpufreq_hw_driver); } -device_initcall (qcom_cpufreq_hw_init); +postcore_initcall (qcom_cpufreq_hw_init); static void __exit qcom_cpufreq_hw_exit(void) {
Signature · 1 line
2.17.1
Zhang Rui
reviewerHi,
Given that all the patches in this series have got the ACK from the subsystem maintainers, I suppose we can take all the patches through thermal tree, right?
thanks,
rui
Quoted 60 lines · Amit Kucheria
Changes since v4:
- Collect Acks
- Pick the US spelling for 'initialis^Hze' consistently.Changes since v3:
- Init schedutil governor earlier too
- Simplified changes tothermal_init()error path
- Collects AcksChanges since v2:
- Missed one patch when posting v2. Respinning.Changes since v1:
- Completely get rid of netlink support in the thermal framework.
- This changes the early init patch to a single line - change tocore_initcall. Changed authorship of patch since it is nothing like
the
original. Lina, let me know if you feel otherwise.
- I've tested to make sure that the qcom-cpufreq-hw driver continues to
work correctly as a module so this won't impact Android's GKI
plans.
- Collected AcksDevice boot needs to be as fast as possible while keeping under the thermal
envelope. Now that thermal framework is built-in to the kernel, we can
initialize it earlier to enable thermal mitigation during boot.We also need the cpufreq HW drivers to be initialised earlier to act as the
cooling devices. This series only converts over the qcom-hw driver to initialize earlier but can be extended to other platforms as well.Amit Kucheria (6):
thermal: Remove netlink support
thermal: Initialize thermal subsystem earlier
cpufreq: Initialize the governors incore_initcall
cpufreq: Initialize cpufreq-dt driver earlier
clk: qcom: Initialize clock drivers earlier
cpufreq: qcom-hw: Move driver initialization earlier.../driver-api/thermal/sysfs-api.rst | 26 +---- drivers/clk/qcom/clk-rpmh.c | 2 +- drivers/clk/qcom/gcc-qcs404.c | 2 +- drivers/clk/qcom/gcc-sdm845.c | 2 +- drivers/cpufreq/cpufreq-dt-platdev.c | 2 +- drivers/cpufreq/cpufreq_conservative.c | 2 +- drivers/cpufreq/cpufreq_ondemand.c | 2 +- drivers/cpufreq/cpufreq_performance.c | 2 +- drivers/cpufreq/cpufreq_powersave.c | 2 +- drivers/cpufreq/cpufreq_userspace.c | 2 +- drivers/cpufreq/qcom-cpufreq-hw.c | 2 +- drivers/thermal/thermal_core.c | 103 +--------------- -- include/linux/thermal.h | 11 -- kernel/sched/cpufreq_schedutil.c | 2 +- 14 files changed, 19 insertions(+), 143 deletions(-)
Hi Rui,
I'm assuming that since Rafael acked it, he is ok with this going thru the thermal tree.
Regards,
Amit
Quoted 72 lines · Zhang Rui
Hi,
Given that all the patches in this series have got the ACK from the subsystem maintainers, I suppose we can take all the patches through thermal tree, right?
thanks,
ruiQuoted 60 lines · Amit Kucheria
Changes since v4:
- Collect Acks
- Pick the US spelling for 'initialis^Hze' consistently.Changes since v3:
- Init schedutil governor earlier too
- Simplified changes tothermal_init()error path
- Collects AcksChanges since v2:
- Missed one patch when posting v2. Respinning.Changes since v1:
- Completely get rid of netlink support in the thermal framework.
- This changes the early init patch to a single line - change tocore_initcall. Changed authorship of patch since it is nothing like
the
original. Lina, let me know if you feel otherwise.
- I've tested to make sure that the qcom-cpufreq-hw driver continues to
work correctly as a module so this won't impact Android's GKI
plans.
- Collected AcksDevice boot needs to be as fast as possible while keeping under the thermal
envelope. Now that thermal framework is built-in to the kernel, we can
initialize it earlier to enable thermal mitigation during boot.We also need the cpufreq HW drivers to be initialised earlier to act as the
cooling devices. This series only converts over the qcom-hw driver to initialize earlier but can be extended to other platforms as well.Amit Kucheria (6):
thermal: Remove netlink support
thermal: Initialize thermal subsystem earlier
cpufreq: Initialize the governors incore_initcall
cpufreq: Initialize cpufreq-dt driver earlier
clk: qcom: Initialize clock drivers earlier
cpufreq: qcom-hw: Move driver initialization earlier.../driver-api/thermal/sysfs-api.rst | 26 +---- drivers/clk/qcom/clk-rpmh.c | 2 +- drivers/clk/qcom/gcc-qcs404.c | 2 +- drivers/clk/qcom/gcc-sdm845.c | 2 +- drivers/cpufreq/cpufreq-dt-platdev.c | 2 +- drivers/cpufreq/cpufreq_conservative.c | 2 +- drivers/cpufreq/cpufreq_ondemand.c | 2 +- drivers/cpufreq/cpufreq_performance.c | 2 +- drivers/cpufreq/cpufreq_powersave.c | 2 +- drivers/cpufreq/cpufreq_userspace.c | 2 +- drivers/cpufreq/qcom-cpufreq-hw.c | 2 +- drivers/thermal/thermal_core.c | 103 +--------------- -- include/linux/thermal.h | 11 -- kernel/sched/cpufreq_schedutil.c | 2 +- 14 files changed, 19 insertions(+), 143 deletions(-)
Hi Zhang,
Quoted 5 lines · Zhang Rui
Hi,
Given that all the patches in this series have got the ACK from the subsystem maintainers, I suppose we can take all the patches through thermal tree, right?
Right
Signature · 5 lines
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog