Skip to contentSkip to conversation

net: stmmac: Fixes for -net

PATCH Superseded Jose Abreu 2 participants 12 messages Oct 31, 2019

Subsystems (4)

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore

Jose Abreu

author
#0 lore raw

v2 cover net: stmmac: Fixes for -net

Misc fixes for stmmac.

Patch 1/10, corrects a sparse warning reported by kbuild.

Patch 2/10 and 3/10, use the correct variable type for bitrev32() calls.

Patch 4/10, fixes the random failures the we were seing when running selftests. This commit was re-worded because the old commit log no longer applied so we didn't add the history log to the commit. So far, no selftests failures were seen with the new re-worked commit.

Patch 5/10, prevents a crash that can occur when receiving AVB packets and with SPH feature enabled on XGMAC.

Patch 6/10, fixes the correct settings for CBS on XGMAC.

Patch 7/10, corrects the interpretation of AVB feature on XGMAC.

Patch 8/10, disables Flow Control for AVB enabled queues on XGMAC.

Patch 9/10, disables MMC interrupts on XGMAC, preventing a storm of interrupts.

Patch 10/10, was added in this version and it fixes the incorrect number of packets that were being passed to NAPI.

---
Cc: Giuseppe Cavallaro <[email protected]>
Cc: Alexandre Torgue <[email protected]>
Cc: Jose Abreu <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Maxime Coquelin <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
---

Jose Abreu (10):
net: stmmac: Fix sparse warning
net: stmmac: gmac4: bitrev32 returns u32
net: stmmac: xgmac: bitrev32 returns u32
net: stmmac: selftests: Prevent false positives in filter tests
net: stmmac: xgmac: Only get SPH header len if available
net: stmmac: xgmac: Fix TSA selection
net: stmmac: xgmac: Fix AV Feature detection
net: stmmac: xgmac: Disable Flow Control when 1 or more queues are in
AV
net: stmmac: xgmac: Disable MMC interrupts by default
net: stmmac: Fix the packet count in stmmac_rx()

 drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c  |   4 +-
 .../net/ethernet/stmicro/stmmac/dwxgmac2_core.c    |   5 +-
 .../net/ethernet/stmicro/stmmac/dwxgmac2_descs.c   |   3 +-
 drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c |   4 +-
 drivers/net/ethernet/stmicro/stmmac/hwif.h         |   2 +-
 drivers/net/ethernet/stmicro/stmmac/mmc_core.c     |   6 +-
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c  |  10 +-
 .../net/ethernet/stmicro/stmmac/stmmac_selftests.c | 134 +++++++++++++++------
 8 files changed, 115 insertions(+), 53 deletions(-)
Signature · 1 line
2.7.4
author
#1 lore raw

PATCH v2 1/10 net: stmmac: Fix sparse warning

The VID is converted to le16 so the variable must be __le16 type.

Fixes c7ab0b8088d7 ("net: stmmac: Fallback to VLAN Perfect filtering if HASH is not available")

---
Cc: Giuseppe Cavallaro <[email protected]>
Cc: Alexandre Torgue <[email protected]>
Cc: Jose Abreu <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Maxime Coquelin <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]

---
 drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c   | 2 +-
 drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c | 2 +-
 drivers/net/ethernet/stmicro/stmmac/hwif.h          | 2 +-
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c   | 5 +++--
 4 files changed, 6 insertions(+), 5 deletions(-)
drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c +1 -1
index bec929daf703..365e607f07cd 100644
@@ -733,7 +733,7 @@ static void dwmac4_set_mac_loopback(void __iomem *ioaddr, bool enable)
 }
 
 static void dwmac4_update_vlan_hash(struct mac_device_info *hw, u32 hash,
-				    u16 perfect_match, bool is_double)
+				    __le16 perfect_match, bool is_double)
 {
 	void __iomem *ioaddr = hw->pcsr;
 
drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c +1 -1
index 5cda360d5d07..e24382d00e62 100644
@@ -555,7 +555,7 @@ static int dwxgmac2_rss_configure(struct mac_device_info *hw,
 }
 
 static void dwxgmac2_update_vlan_hash(struct mac_device_info *hw, u32 hash,
-				      u16 perfect_match, bool is_double)
+				      __le16 perfect_match, bool is_double)
 {
 	void __iomem *ioaddr = hw->pcsr;
 
drivers/net/ethernet/stmicro/stmmac/hwif.h +1 -1
index 1303d1e9a18f..509daeefdb79 100644
@@ -357,7 +357,7 @@ struct stmmac_ops {
 			     struct stmmac_rss *cfg, u32 num_rxq);
 	/* VLAN */
 	void (*update_vlan_hash)(struct mac_device_info *hw, u32 hash,
-				 u16 perfect_match, bool is_double);
+				 __le16 perfect_match, bool is_double);
 	void (*enable_vlan)(struct mac_device_info *hw, u32 type);
 	/* TX Timestamp */
 	int (*get_mac_tx_timestamp)(struct mac_device_info *hw, u64 *ts);
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +3 -2
index 28705dbe5801..063b0ecd244b 100644
@@ -4207,6 +4207,7 @@ static u32 stmmac_vid_crc32_le(__le16 vid_le)
 static int stmmac_vlan_update(struct stmmac_priv *priv, bool is_double)
 {
 	u32 crc, hash = 0;
+	__le16 pmatch = 0;
 	int count = 0;
 	u16 vid = 0;
 
@@ -4221,11 +4222,11 @@ static int stmmac_vlan_update(struct stmmac_priv *priv, bool is_double)
 		if (count > 2) /* VID = 0 always passes filter */
 			return -EOPNOTSUPP;
 
-		vid = cpu_to_le16(vid);
+		pmatch = cpu_to_le16(vid);
 		hash = 0;
 	}
 
-	return stmmac_update_vlan_hash(priv, priv->hw, hash, vid, is_double);
+	return stmmac_update_vlan_hash(priv, priv->hw, hash, pmatch, is_double);
 }
 
 static int stmmac_vlan_rx_add_vid(struct net_device *ndev, __be16 proto, u16 vid)
Signature · 1 line
2.7.4
maintainer
#2 lore raw

Re: [PATCH net v2 01/10] net: stmmac: Fix sparse warning

From: Jose Abreu <[email protected]>
Date: Thu, 31 Oct 2019 12:00:39 +0100

Quoted 5 lines

The VID is converted to le16 so the variable must be __le16 type.

Fixes c7ab0b8088d7 ("net: stmmac: Fallback to VLAN Perfect filtering if HASH is not available")

This doesn't even come close to applying to my 'net' tree.

[davem@localhost net]$ git am --signoff bundle-19989-stmmac-fixes.mbox
Applying: net: stmmac: Fix sparse warning
error: patch failed: drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c:733
error: drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c: patch does not apply
error: patch failed: drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c:555
error: drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c: patch does not apply
error: patch failed: drivers/net/ethernet/stmicro/stmmac/hwif.h:357
error: drivers/net/ethernet/stmicro/stmmac/hwif.h: patch does not apply
error: patch failed: drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:4207
error: drivers/net/ethernet/stmicro/stmmac/stmmac_main.c: patch does not apply
Patch failed at 0001 net: stmmac: Fix sparse warning
hint: Use 'git am --show-current-patch' to see the failed patch
When you have resolved this problem, run "git am --continue".
If you prefer to skip this patch, run "git am --skip" instead.
To restore the original branch and stop patching, run "git am --abort". [davem@localhost net]$ patch -p1 <.git/rebase-apply/patch
patching file drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
Hunk #1 FAILED at 733.
1 out of 1 hunk FAILED -- saving rejects to file drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c.rej patching file drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
Hunk #1 FAILED at 555.
1 out of 1 hunk FAILED -- saving rejects to file drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c.rej patching file drivers/net/ethernet/stmicro/stmmac/hwif.h
Hunk #1 FAILED at 357.
1 out of 1 hunk FAILED -- saving rejects to file drivers/net/ethernet/stmicro/stmmac/hwif.h.rej patching file drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
Hunk #1 FAILED at 4207.
Hunk #2 FAILED at 4221.
2 out of 2 hunks FAILED -- saving rejects to file drivers/net/ethernet/stmicro/stmmac/stmmac_main.c.rej [davem@localhost net]$

author
#3 lore raw

PATCH v2 2/10 net: stmmac: gmac4: bitrev32 returns u32

In reply to Jose Abreu

The bitrev32 function returns an u32 var, not an int. Fix it.

Fixes 477286b53f55 ("stmmac: add GMAC4 core support")

---
Cc: Giuseppe Cavallaro <[email protected]>
Cc: Alexandre Torgue <[email protected]>
Cc: Jose Abreu <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Maxime Coquelin <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]

---
 drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c +1 -1
index 365e607f07cd..40ca00e596dd 100644
@@ -432,7 +432,7 @@ static void dwmac4_set_filter(struct mac_device_info *hw,
 			 * bits used depends on the hardware configuration
 			 * selected at core configuration time.
 			 */
-			int bit_nr = bitrev32(~crc32_le(~0, ha->addr,
+			u32 bit_nr = bitrev32(~crc32_le(~0, ha->addr,
 					ETH_ALEN)) >> (32 - mcbitslog2);
 			/* The most significant bit determines the register to
 			 * use (H/L) while the other 5 bits determine the bit
Signature · 1 line
2.7.4
author
#4 lore raw

PATCH v2 3/10 net: stmmac: xgmac: bitrev32 returns u32

In reply to Jose Abreu

The bitrev32 function returns an u32 var, not an int. Fix it.

Fixes 0efedbf11f07 ("net: stmmac: xgmac: Fix XGMAC selftests")

---
Cc: Giuseppe Cavallaro <[email protected]>
Cc: Alexandre Torgue <[email protected]>
Cc: Jose Abreu <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Maxime Coquelin <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]

---
 drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c +1 -1
index e24382d00e62..b58522b8f782 100644
@@ -463,7 +463,7 @@ static void dwxgmac2_set_filter(struct mac_device_info *hw,
 		value |= XGMAC_FILTER_HMC;
 
 		netdev_for_each_mc_addr(ha, dev) {
-			int nr = (bitrev32(~crc32_le(~0, ha->addr, 6)) >>
+			u32 nr = (bitrev32(~crc32_le(~0, ha->addr, 6)) >>
 					(32 - mcbitslog2));
 			mc_filter[nr >> 5] |= (1 << (nr & 0x1F));
 		}
Signature · 1 line
2.7.4
author
#5 lore raw

PATCH v2 4/10 net: stmmac: selftests: Prevent false positives in filter tests

In reply to Jose Abreu

In L2 tests that filter packets by destination MAC address we need to prevent false positives that can occur if we add an address that collides with the existing ones.

To fix this, lets manually check if the new address to be added is already present in the NIC and use a different one if so. For Hash filtering this also envolves converting the address to the hash.

Fixes 091810dbded9 ("net: stmmac: Introduce selftests support")

---
Cc: Giuseppe Cavallaro <[email protected]>
Cc: Alexandre Torgue <[email protected]>
Cc: Jose Abreu <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Maxime Coquelin <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]

---
 .../net/ethernet/stmicro/stmmac/stmmac_selftests.c | 134 +++++++++++++++------
 1 file changed, 94 insertions(+), 40 deletions(-)
drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c +94 -40
index 0b5db52149bc..f3d8b9336b8e 100644
@@ -6,7 +6,9 @@
  * Author: Jose Abreu <[email protected]>
  */
 
+#include <linux/bitrev.h>
 #include <linux/completion.h>
+#include <linux/crc32.h>
 #include <linux/ethtool.h>
 #include <linux/ip.h>
 #include <linux/phy.h>
@@ -485,12 +487,48 @@ static int stmmac_filter_check(struct stmmac_priv *priv)
 	return -EOPNOTSUPP;
 }
 
+static bool stmmac_hash_check(struct stmmac_priv *priv, unsigned char *addr)
+{
+	int mc_offset = 32 - priv->hw->mcast_bits_log2;
+	struct netdev_hw_addr *ha;
+	u32 hash, hash_nr;
+
+	/* First compute the hash for desired addr */
+	hash = bitrev32(~crc32_le(~0, addr, 6)) >> mc_offset;
+	hash_nr = hash >> 5;
+	hash = 1 << (hash & 0x1f);
+
+	/* Now, check if it collides with any existing one */
+	netdev_for_each_mc_addr(ha, priv->dev) {
+		u32 nr = bitrev32(~crc32_le(~0, ha->addr, ETH_ALEN)) >> mc_offset;
+		if (((nr >> 5) == hash_nr) && ((1 << (nr & 0x1f)) == hash))
+			return false;
+	}
+
+	/* No collisions, address is good to go */
+	return true;
+}
+
+static bool stmmac_perfect_check(struct stmmac_priv *priv, unsigned char *addr)
+{
+	struct netdev_hw_addr *ha;
+
+	/* Check if it collides with any existing one */
+	netdev_for_each_uc_addr(ha, priv->dev) {
+		if (!memcmp(ha->addr, addr, ETH_ALEN))
+			return false;
+	}
+
+	/* No collisions, address is good to go */
+	return true;
+}
+
 static int stmmac_test_hfilt(struct stmmac_priv *priv)
 {
-	unsigned char gd_addr[ETH_ALEN] = {0x01, 0xee, 0xdd, 0xcc, 0xbb, 0xaa};
-	unsigned char bd_addr[ETH_ALEN] = {0x01, 0x01, 0x02, 0x03, 0x04, 0x05};
+	unsigned char gd_addr[ETH_ALEN] = {0xf1, 0xee, 0xdd, 0xcc, 0xbb, 0xaa};
+	unsigned char bd_addr[ETH_ALEN] = {0xf1, 0xff, 0xff, 0xff, 0xff, 0xff};
 	struct stmmac_packet_attrs attr = { };
-	int ret;
+	int ret, tries = 256;
 
 	ret = stmmac_filter_check(priv);
 	if (ret)
@@ -499,6 +537,16 @@ static int stmmac_test_hfilt(struct stmmac_priv *priv)
 	if (netdev_mc_count(priv->dev) >= priv->hw->multicast_filter_bins)
 		return -EOPNOTSUPP;
 
+	while (--tries) {
+		/* We only need to check the bd_addr for collisions */
+		bd_addr[ETH_ALEN - 1] = tries;
+		if (stmmac_hash_check(priv, bd_addr))
+			break;
+	}
+
+	if (!tries)
+		return -EOPNOTSUPP;
+
 	ret = dev_mc_add(priv->dev, gd_addr);
 	if (ret)
 		return ret;
@@ -523,13 +571,25 @@ static int stmmac_test_hfilt(struct stmmac_priv *priv)
 
 static int stmmac_test_pfilt(struct stmmac_priv *priv)
 {
-	unsigned char gd_addr[ETH_ALEN] = {0x00, 0x01, 0x44, 0x55, 0x66, 0x77};
-	unsigned char bd_addr[ETH_ALEN] = {0x08, 0x00, 0x22, 0x33, 0x44, 0x55};
+	unsigned char gd_addr[ETH_ALEN] = {0xf0, 0x01, 0x44, 0x55, 0x66, 0x77};
+	unsigned char bd_addr[ETH_ALEN] = {0xf0, 0xff, 0xff, 0xff, 0xff, 0xff};
 	struct stmmac_packet_attrs attr = { };
-	int ret;
+	int ret, tries = 256;
 
 	if (stmmac_filter_check(priv))
 		return -EOPNOTSUPP;
+	if (netdev_uc_count(priv->dev) >= priv->hw->unicast_filter_entries)
+		return -EOPNOTSUPP;
+
+	while (--tries) {
+		/* We only need to check the bd_addr for collisions */
+		bd_addr[ETH_ALEN - 1] = tries;
+		if (stmmac_perfect_check(priv, bd_addr))
+			break;
+	}
+
+	if (!tries)
+		return -EOPNOTSUPP;
 
 	ret = dev_uc_add(priv->dev, gd_addr);
 	if (ret)
@@ -553,39 +613,31 @@ static int stmmac_test_pfilt(struct stmmac_priv *priv)
 	return ret;
 }
 
-static int stmmac_dummy_sync(struct net_device *netdev, const u8 *addr)
-{
-	return 0;
-}
-
-static void stmmac_test_set_rx_mode(struct net_device *netdev)
-{
-	/* As we are in test mode of ethtool we already own the rtnl lock
-	 * so no address will change from user. We can just call the
-	 * ndo_set_rx_mode() callback directly */
-	if (netdev->netdev_ops->ndo_set_rx_mode)
-		netdev->netdev_ops->ndo_set_rx_mode(netdev);
-}
-
 static int stmmac_test_mcfilt(struct stmmac_priv *priv)
 {
-	unsigned char uc_addr[ETH_ALEN] = {0x00, 0x01, 0x44, 0x55, 0x66, 0x77};
-	unsigned char mc_addr[ETH_ALEN] = {0x01, 0x01, 0x44, 0x55, 0x66, 0x77};
+	unsigned char uc_addr[ETH_ALEN] = {0xf0, 0xff, 0xff, 0xff, 0xff, 0xff};
+	unsigned char mc_addr[ETH_ALEN] = {0xf1, 0xff, 0xff, 0xff, 0xff, 0xff};
 	struct stmmac_packet_attrs attr = { };
-	int ret;
+	int ret, tries = 256;
 
 	if (stmmac_filter_check(priv))
 		return -EOPNOTSUPP;
-	if (!priv->hw->multicast_filter_bins)
+	if (netdev_uc_count(priv->dev) >= priv->hw->unicast_filter_entries)
 		return -EOPNOTSUPP;
 
-	/* Remove all MC addresses */
-	__dev_mc_unsync(priv->dev, NULL);
-	stmmac_test_set_rx_mode(priv->dev);
+	while (--tries) {
+		/* We only need to check the mc_addr for collisions */
+		mc_addr[ETH_ALEN - 1] = tries;
+		if (stmmac_hash_check(priv, mc_addr))
+			break;
+	}
+
+	if (!tries)
+		return -EOPNOTSUPP;
 
 	ret = dev_uc_add(priv->dev, uc_addr);
 	if (ret)
-		goto cleanup;
+		return ret;
 
 	attr.dst = uc_addr;
 
@@ -602,30 +654,34 @@ static int stmmac_test_mcfilt(struct stmmac_priv *priv)
 
 cleanup:
 	dev_uc_del(priv->dev, uc_addr);
-	__dev_mc_sync(priv->dev, stmmac_dummy_sync, NULL);
-	stmmac_test_set_rx_mode(priv->dev);
 	return ret;
 }
 
 static int stmmac_test_ucfilt(struct stmmac_priv *priv)
 {
-	unsigned char uc_addr[ETH_ALEN] = {0x00, 0x01, 0x44, 0x55, 0x66, 0x77};
-	unsigned char mc_addr[ETH_ALEN] = {0x01, 0x01, 0x44, 0x55, 0x66, 0x77};
+	unsigned char uc_addr[ETH_ALEN] = {0xf0, 0xff, 0xff, 0xff, 0xff, 0xff};
+	unsigned char mc_addr[ETH_ALEN] = {0xf1, 0xff, 0xff, 0xff, 0xff, 0xff};
 	struct stmmac_packet_attrs attr = { };
-	int ret;
+	int ret, tries = 256;
 
 	if (stmmac_filter_check(priv))
 		return -EOPNOTSUPP;
-	if (!priv->hw->multicast_filter_bins)
+	if (netdev_mc_count(priv->dev) >= priv->hw->multicast_filter_bins)
 		return -EOPNOTSUPP;
 
-	/* Remove all UC addresses */
-	__dev_uc_unsync(priv->dev, NULL);
-	stmmac_test_set_rx_mode(priv->dev);
+	while (--tries) {
+		/* We only need to check the uc_addr for collisions */
+		uc_addr[ETH_ALEN - 1] = tries;
+		if (stmmac_perfect_check(priv, uc_addr))
+			break;
+	}
+
+	if (!tries)
+		return -EOPNOTSUPP;
 
 	ret = dev_mc_add(priv->dev, mc_addr);
 	if (ret)
-		goto cleanup;
+		return ret;
 
 	attr.dst = mc_addr;
 
@@ -642,8 +698,6 @@ static int stmmac_test_ucfilt(struct stmmac_priv *priv)
 
 cleanup:
 	dev_mc_del(priv->dev, mc_addr);
-	__dev_uc_sync(priv->dev, stmmac_dummy_sync, NULL);
-	stmmac_test_set_rx_mode(priv->dev);
 	return ret;
 }
 
Signature · 1 line
2.7.4
author
#6 lore raw

PATCH v2 5/10 net: stmmac: xgmac: Only get SPH header len if available

In reply to Jose Abreu

Split Header length is only available when L34T != 0. Fix this by correctly checking if L34T is not zero before trying to get Header length.

Fixes 67afd6d1cfdf ("net: stmmac: Add Split Header support and enable it in XGMAC cores")

---
Cc: Giuseppe Cavallaro <[email protected]>
Cc: Alexandre Torgue <[email protected]>
Cc: Jose Abreu <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Maxime Coquelin <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]

---
 drivers/net/ethernet/stmicro/stmmac/dwxgmac2_descs.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/net/ethernet/stmicro/stmmac/dwxgmac2_descs.c +2 -1
index ae48154f933c..bd5838ce1e8a 100644
@@ -288,7 +288,8 @@ static int dwxgmac2_get_rx_hash(struct dma_desc *p, u32 *hash,
 
 static int dwxgmac2_get_rx_header_len(struct dma_desc *p, unsigned int *len)
 {
-	*len = le32_to_cpu(p->des2) & XGMAC_RDES2_HL;
+	if (le32_to_cpu(p->des3) & XGMAC_RDES3_L34T)
+		*len = le32_to_cpu(p->des2) & XGMAC_RDES2_HL;
 	return 0;
 }
 
Signature · 1 line
2.7.4
author
#7 lore raw

PATCH v2 6/10 net: stmmac: xgmac: Fix TSA selection

In reply to Jose Abreu

When we change between Transmission Scheduling Algorithms, we need to clear previous values so that the new chosen algorithm is correctly selected.

Fixes ec6ea8e3eee9 ("net: stmmac: Add CBS support in XGMAC2")

---
Cc: Giuseppe Cavallaro <[email protected]>
Cc: Alexandre Torgue <[email protected]>
Cc: Jose Abreu <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Maxime Coquelin <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]

---
 drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c | 1 +
 1 file changed, 1 insertion(+)
drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c +1 -0
index b58522b8f782..082f5ee9e525 100644
@@ -224,6 +224,7 @@ static void dwxgmac2_config_cbs(struct mac_device_info *hw,
 	writel(low_credit, ioaddr + XGMAC_MTL_TCx_LOCREDIT(queue));
 
 	value = readl(ioaddr + XGMAC_MTL_TCx_ETS_CONTROL(queue));
+	value &= ~XGMAC_TSA;
 	value |= XGMAC_CC | XGMAC_CBS;
 	writel(value, ioaddr + XGMAC_MTL_TCx_ETS_CONTROL(queue));
 }
Signature · 1 line
2.7.4
author
#8 lore raw

PATCH v2 7/10 net: stmmac: xgmac: Fix AV Feature detection

In reply to Jose Abreu

Fix incorrect precedence of operators. For reference: AV implies AV Feature but RAV implies only RX side AV Feature. As we want full AV features we need to check RAV.

Fixes c2b69474d63b ("net: stmmac: xgmac: Correct RAVSEL field interpretation")

---
Cc: Giuseppe Cavallaro <[email protected]>
Cc: Alexandre Torgue <[email protected]>
Cc: Jose Abreu <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Maxime Coquelin <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]

---
 drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c +1 -1
index 7cc331996cd8..7bd1447f9f47 100644
@@ -372,7 +372,7 @@ static void dwxgmac2_get_hw_feature(void __iomem *ioaddr,
 	dma_cap->eee = (hw_cap & XGMAC_HWFEAT_EEESEL) >> 13;
 	dma_cap->atime_stamp = (hw_cap & XGMAC_HWFEAT_TSSEL) >> 12;
 	dma_cap->av = (hw_cap & XGMAC_HWFEAT_AVSEL) >> 11;
-	dma_cap->av &= !(hw_cap & XGMAC_HWFEAT_RAVSEL) >> 10;
+	dma_cap->av &= !((hw_cap & XGMAC_HWFEAT_RAVSEL) >> 10);
 	dma_cap->arpoffsel = (hw_cap & XGMAC_HWFEAT_ARPOFFSEL) >> 9;
 	dma_cap->rmon = (hw_cap & XGMAC_HWFEAT_MMCSEL) >> 8;
 	dma_cap->pmt_magic_frame = (hw_cap & XGMAC_HWFEAT_MGKSEL) >> 7;
Signature · 1 line
2.7.4
author
#9 lore raw

PATCH v2 8/10 net: stmmac: xgmac: Disable Flow Control when 1 or more queues are in AV

In reply to Jose Abreu

When in AVB mode we need to disable flow control to prevent MAC from pausing in TX side.

Fixes ec6ea8e3eee9 ("net: stmmac: Add CBS support in XGMAC2")

---
Cc: Giuseppe Cavallaro <[email protected]>
Cc: Alexandre Torgue <[email protected]>
Cc: Jose Abreu <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Maxime Coquelin <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]

---
 drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c +2 -0
index 7bd1447f9f47..f148cb2061d8 100644
@@ -473,6 +473,7 @@ static void dwxgmac2_enable_tso(void __iomem *ioaddr, bool en, u32 chan)
 static void dwxgmac2_qmode(void __iomem *ioaddr, u32 channel, u8 qmode)
 {
 	u32 value = readl(ioaddr + XGMAC_MTL_TXQ_OPMODE(channel));
+	u32 flow = readl(ioaddr + XGMAC_RX_FLOW_CTRL);
 
 	value &= ~XGMAC_TXQEN;
 	if (qmode != MTL_QUEUE_AVB) {
@@ -480,6 +481,7 @@ static void dwxgmac2_qmode(void __iomem *ioaddr, u32 channel, u8 qmode)
 		writel(0, ioaddr + XGMAC_MTL_TCx_ETS_CONTROL(channel));
 	} else {
 		value |= 0x1 << XGMAC_TXQEN_SHIFT;
+		writel(flow & (~XGMAC_RFE), ioaddr + XGMAC_RX_FLOW_CTRL);
 	}
 
 	writel(value, ioaddr +  XGMAC_MTL_TXQ_OPMODE(channel));
Signature · 1 line
2.7.4
author
#10 lore raw

PATCH v2 9/10 net: stmmac: xgmac: Disable MMC interrupts by default

In reply to Jose Abreu

MMC interrupts were being enabled, which is not what we want because it will lead to a storm of interrupts that are not handled at all. Fix it by disabling all MMC interrupts for XGMAC.

Fixes b6cdf09f51c2 ("net: stmmac: xgmac: Implement MMC counters")

---
Cc: Giuseppe Cavallaro <[email protected]>
Cc: Alexandre Torgue <[email protected]>
Cc: Jose Abreu <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Maxime Coquelin <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]

---
 drivers/net/ethernet/stmicro/stmmac/mmc_core.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/net/ethernet/stmicro/stmmac/mmc_core.c +4 -2
index a223584f5f9a..252cf48c5816 100644
@@ -176,6 +176,7 @@
 #define MMC_XGMAC_RX_PKT_SMD_ERR	0x22c
 #define MMC_XGMAC_RX_PKT_ASSEMBLY_OK	0x230
 #define MMC_XGMAC_RX_FPE_FRAG		0x234
+#define MMC_XGMAC_RX_IPC_INTR_MASK	0x25c
 
 static void dwmac_mmc_ctrl(void __iomem *mmcaddr, unsigned int mode)
 {
@@ -333,8 +334,9 @@ static void dwxgmac_mmc_ctrl(void __iomem *mmcaddr, unsigned int mode)
 
 static void dwxgmac_mmc_intr_all_mask(void __iomem *mmcaddr)
 {
-	writel(MMC_DEFAULT_MASK, mmcaddr + MMC_RX_INTR_MASK);
-	writel(MMC_DEFAULT_MASK, mmcaddr + MMC_TX_INTR_MASK);
+	writel(0x0, mmcaddr + MMC_RX_INTR_MASK);
+	writel(0x0, mmcaddr + MMC_TX_INTR_MASK);
+	writel(MMC_DEFAULT_MASK, mmcaddr + MMC_XGMAC_RX_IPC_INTR_MASK);
 }
 
 static void dwxgmac_read_mmc_reg(void __iomem *addr, u32 reg, u32 *dest)
Signature · 1 line
2.7.4
author
#11 lore raw

PATCH v2 10/10 net: stmmac: Fix the packet count in stmmac_rx()

In reply to Jose Abreu

Currently, stmmac_rx() is counting the number of descriptors but it should count the number of packets as specified by the NAPI limit.

Fix this.

Fixes ec222003bd94 ("net: stmmac: Prepare to add Split Header support")

---
Cc: Giuseppe Cavallaro <[email protected]>
Cc: Alexandre Torgue <[email protected]>
Cc: Jose Abreu <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Maxime Coquelin <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]

---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +3 -2
index 063b0ecd244b..d3886d2b16d4 100644
@@ -3505,8 +3505,6 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue)
 		if (unlikely(status & dma_own))
 			break;
 
-		count++;
-
 		rx_q->cur_rx = STMMAC_GET_ENTRY(rx_q->cur_rx, DMA_RX_SIZE);
 		next_entry = rx_q->cur_rx;
 
@@ -3533,6 +3531,7 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue)
 			goto read_again;
 		if (unlikely(error)) {
 			dev_kfree_skb(skb);
+			count++;
 			continue;
 		}
 
@@ -3572,6 +3571,7 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue)
 			skb = napi_alloc_skb(&ch->rx_napi, len);
 			if (!skb) {
 				priv->dev->stats.rx_dropped++;
+				count++;
 				continue;
 			}
 
@@ -3637,6 +3637,7 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue)
 
 		priv->dev->stats.rx_packets++;
 		priv->dev->stats.rx_bytes += len;
+		count++;
 	}
 
 	if (status & rx_not_ls) {
Signature · 1 line
2.7.4