Skip to contentSkip to conversation

Some improvements for OMAP hwspinlock

PATCH New Baolin Wang 1 participant 4 messages Dec 4, 2019

Subsystems (2)
Hardware spinlock core OMAP hardware spinlock support
lore
Share & tools
lore

Baolin Wang

author reviewer
#0 lore raw

cover Some improvements for OMAP hwspinlock

This patch set did some optimization for OMAP hwlock controller with changing to use some devm_xxx APIs to simplify code.

Baolin Wang (3):
hwspinlock: omap: Change to use devm_platform_ioremap_resource()
hwspinlock: omap: Use devm_kzalloc() to allocate memory
hwspinlock: omap: Use devm_hwspin_lock_register() to register hwlock
controller

 drivers/hwspinlock/omap_hwspinlock.c |   45 ++++++++++------------------------
 1 file changed, 13 insertions(+), 32 deletions(-)
Signature · 1 line
1.7.9.5
author reviewer
#1 lore raw

PATCH 1/3 hwspinlock: omap: Change to use devm_platform_ioremap_resource()

Use the new helper that wraps the calls to platform_get_resource() and devm_ioremap_resource() together, which can simpify the code. Meanwhile renaming the error label to make more sense after removing iounmap().

Signed-off-by Baolin Wang <[email protected]>
---
 drivers/hwspinlock/omap_hwspinlock.c |   24 ++++++++----------------
 1 file changed, 8 insertions(+), 16 deletions(-)
drivers/hwspinlock/omap_hwspinlock.c +8 -16
index 14e1a53..dbb1a4c 100644
@@ -76,7 +76,6 @@ static int omap_hwspinlock_probe(struct platform_device *pdev)
 	struct device_node *node = pdev->dev.of_node;
 	struct hwspinlock_device *bank;
 	struct hwspinlock *hwlock;
-	struct resource *res;
 	void __iomem *io_base;
 	int num_locks, i, ret;
 	/* Only a single hwspinlock block device is supported */

@@ -85,13 +84,9 @@ static int omap_hwspinlock_probe(struct platform_device *pdev)
 	if (!node)
 		return -ENODEV;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res)
-		return -ENODEV;
-
-	io_base = ioremap(res->start, resource_size(res));
-	if (!io_base)
-		return -ENOMEM;
+	io_base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(io_base))
+		return PTR_ERR(io_base);
 
 	/*
 	 * make sure the module is enabled and clocked before reading

@@ -101,7 +96,7 @@ static int omap_hwspinlock_probe(struct platform_device *pdev)
 	ret = pm_runtime_get_sync(&pdev->dev);
 	if (ret < 0) {
 		pm_runtime_put_noidle(&pdev->dev);
-		goto iounmap_base;
+		goto runtime_err;
 	}
 
 	/* Determine number of locks */

@@ -114,12 +109,12 @@ static int omap_hwspinlock_probe(struct platform_device *pdev)
 	 */
 	ret = pm_runtime_put(&pdev->dev);
 	if (ret < 0)
-		goto iounmap_base;
+		goto runtime_err;
 
 	/* one of the four lsb's must be set, and nothing else */
 	if (hweight_long(i & 0xf) != 1 || i > 8) {
 		ret = -EINVAL;
-		goto iounmap_base;
+		goto runtime_err;
 	}
 
 	num_locks = i * 32; /* actual number of locks in this device */

@@ -127,7 +122,7 @@ static int omap_hwspinlock_probe(struct platform_device *pdev)
 	bank = kzalloc(struct_size(bank, lock, num_locks), GFP_KERNEL);
 	if (!bank) {
 		ret = -ENOMEM;
-		goto iounmap_base;
+		goto runtime_err;
 	}
 
 	platform_set_drvdata(pdev, bank);

@@ -147,16 +142,14 @@ static int omap_hwspinlock_probe(struct platform_device *pdev)
 
 reg_fail:
 	kfree(bank);
-iounmap_base:
+runtime_err:
 	pm_runtime_disable(&pdev->dev);
-	iounmap(io_base);
 	return ret;
 }
 
 static int omap_hwspinlock_remove(struct platform_device *pdev)
 {
 	struct hwspinlock_device *bank = platform_get_drvdata(pdev);
-	void __iomem *io_base = bank->lock[0].priv - LOCK_BASE_OFFSET;
 	int ret;
 
 	ret = hwspin_lock_unregister(bank);

@@ -166,7 +159,6 @@ static int omap_hwspinlock_remove(struct platform_device *pdev)
 	}
 
 	pm_runtime_disable(&pdev->dev);
-	iounmap(io_base);
 	kfree(bank);
 
 	return 0;
Signature · 1 line
1.7.9.5
author reviewer
#2 lore raw

PATCH 2/3 hwspinlock: omap: Use devm_kzalloc() to allocate memory

In reply to Baolin Wang

Use devm_kzalloc() to allocate memory, which can simplify the error handling.

Signed-off-by Baolin Wang <[email protected]>
---
 drivers/hwspinlock/omap_hwspinlock.c |    8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)
drivers/hwspinlock/omap_hwspinlock.c +3 -5
index dbb1a4c..3b05560 100644
@@ -119,7 +119,8 @@ static int omap_hwspinlock_probe(struct platform_device *pdev)
 
 	num_locks = i * 32; /* actual number of locks in this device */
 
-	bank = kzalloc(struct_size(bank, lock, num_locks), GFP_KERNEL);
+	bank = devm_kzalloc(&pdev->dev, struct_size(bank, lock, num_locks),
+			    GFP_KERNEL);
 	if (!bank) {
 		ret = -ENOMEM;
 		goto runtime_err;

@@ -133,15 +134,13 @@ static int omap_hwspinlock_probe(struct platform_device *pdev)
 	ret = hwspin_lock_register(bank, &pdev->dev, &omap_hwspinlock_ops,
 						base_id, num_locks);
 	if (ret)
-		goto reg_fail;
+		goto runtime_err;
 
 	dev_dbg(&pdev->dev, "Registered %d locks with HwSpinlock core\n",
 		num_locks);
 
 	return 0;
 
-reg_fail:
-	kfree(bank);
 runtime_err:
 	pm_runtime_disable(&pdev->dev);
 	return ret;

@@ -159,7 +158,6 @@ static int omap_hwspinlock_remove(struct platform_device *pdev)
 	}
 
 	pm_runtime_disable(&pdev->dev);
-	kfree(bank);
 
 	return 0;
 }
Signature · 1 line
1.7.9.5
author reviewer
#3 lore raw

PATCH 3/3 hwspinlock: omap: Use devm_hwspin_lock_register() to register hwlock controller

In reply to Baolin Wang

Use devm_hwspin_lock_register() to register the hwlock controller instead of unregistering the hwlock controller explicitly when removing the device.

Signed-off-by Baolin Wang <[email protected]>
---
 drivers/hwspinlock/omap_hwspinlock.c |   13 ++-----------
 1 file changed, 2 insertions(+), 11 deletions(-)
drivers/hwspinlock/omap_hwspinlock.c +2 -11
index 3b05560..9e8a8c2 100644
@@ -131,8 +131,8 @@ static int omap_hwspinlock_probe(struct platform_device *pdev)
 	for (i = 0, hwlock = &bank->lock[0]; i < num_locks; i++, hwlock++)
 		hwlock->priv = io_base + LOCK_BASE_OFFSET + sizeof(u32) * i;
 
-	ret = hwspin_lock_register(bank, &pdev->dev, &omap_hwspinlock_ops,
-						base_id, num_locks);
+	ret = devm_hwspin_lock_register(&pdev->dev, bank, &omap_hwspinlock_ops,
+					base_id, num_locks);
 	if (ret)
 		goto runtime_err;
 

@@ -148,15 +148,6 @@ static int omap_hwspinlock_probe(struct platform_device *pdev)
 
 static int omap_hwspinlock_remove(struct platform_device *pdev)
 {
-	struct hwspinlock_device *bank = platform_get_drvdata(pdev);
-	int ret;
-
-	ret = hwspin_lock_unregister(bank);
-	if (ret) {
-		dev_err(&pdev->dev, "%s failed: %d\n", __func__, ret);
-		return ret;
-	}
-
 	pm_runtime_disable(&pdev->dev);
 
 	return 0;
Signature · 1 line
1.7.9.5