Skip to contentSkip to conversation

Extend board_fdt_blob_setup() to support OF_SEPARATE

PATCH New Michal Simek 2 participants 4 messages Jan 6, 2020 – Jan 16, 2020 Arm/Zynq architecture

lore
Share & tools
lore
#0 lore raw

v2 cover Extend board_fdt_blob_setup() to support OF_SEPARATE

Hi,

it is simply series which align board_fdt_blob_setup() with fdtdec with highest priority on default location where external DTB can be found.

Thanks,
Michal

Changes in v2:
- Fix print messages not to generate compilation warnings on arm32
- Silent all prints

Michal Simek (2):
arm64: zynqmp: Rename fw_dtb variable to fdt_blob
arm64: zynqmp: Add support for OF_SEPARATE with board DTB

 board/xilinx/Kconfig        |  2 +-
 board/xilinx/common/board.c | 31 ++++++++++++++++++++++++-------
 2 files changed, 25 insertions(+), 8 deletions(-)
Signature · 1 line
2.24.0
#1 lore raw

PATCH v2 1/2 arm64: zynqmp: Rename fw_dtb variable to fdt_blob

The reason for this change is just get in sync with board_fdt_blob_setup() available at lib/fdtdec.c.

---

Changes in v2: None

 board/xilinx/common/board.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
board/xilinx/common/board.c +4 -4
index 1c28263cb889..62dafe0f9058 100644
@@ -40,13 +40,13 @@ int zynq_board_read_rom_ethaddr(unsigned char *ethaddr)
 #if defined(CONFIG_OF_BOARD)
 void *board_fdt_blob_setup(void)
 {
-	static void *fw_dtb = (void *)CONFIG_XILINX_OF_BOARD_DTB_ADDR;
+	static void *fdt_blob = (void *)CONFIG_XILINX_OF_BOARD_DTB_ADDR;
 
-	if (fdt_magic(fw_dtb) != FDT_MAGIC) {
-		printf("DTB is not passed via %p\n", fw_dtb);
+	if (fdt_magic(fdt_blob) != FDT_MAGIC) {
+		printf("DTB is not passed via %p\n", fdt_blob);
 		return NULL;
 	}
 
-	return fw_dtb;
+	return fdt_blob;
 }
 #endif
Signature · 1 line
2.24.0
#2 lore raw

PATCH v2 2/2 arm64: zynqmp: Add support for OF_SEPARATE with board DTB

In reply to Michal Simek

OF_BOARD and OF_SEPARATE can use board specific board_fdt_blob_setup().

OF_BOARD option is mostly used for picking up DTB from certain location.

OF_SEPARATE option is used when DTB is appended after u-boot binary.

This board specific function is aligned with current version in lib/fdtdec.c with checking CONFIG_XILINX_OF_BOARD_DTB_ADDR address first.

---

Changes in v2:
- Fix print messages not to generate compilation warnings on arm32
- Silent all prints

 board/xilinx/Kconfig        |  2 +-
 board/xilinx/common/board.c | 29 +++++++++++++++++++++++------
 2 files changed, 24 insertions(+), 7 deletions(-)
board/xilinx/Kconfig +1 -1
index 7833b11767c4..73fc1be0141e 100644
@@ -44,7 +44,7 @@ config XILINX_OF_BOARD_DTB_ADDR
 	hex
 	default 0x1000 if ARCH_VERSAL
 	default 0x100000 if ARCH_ZYNQ || ARCH_ZYNQMP
-	depends on OF_BOARD
+	depends on OF_BOARD || OF_SEPARATE
 	help
 	  Offset in the memory where the board configuration DTB is placed.
 
board/xilinx/common/board.c +23 -6
index 62dafe0f9058..ae5fe2729f7e 100644
@@ -5,6 +5,7 @@
  */
 
 #include <common.h>
+#include <asm/sections.h>
 #include <dm/uclass.h>
 #include <i2c.h>
 
@@ -37,16 +38,32 @@ int zynq_board_read_rom_ethaddr(unsigned char *ethaddr)
 	return ret;
 }
 
-#if defined(CONFIG_OF_BOARD)
+#if defined(CONFIG_OF_BOARD) || defined(CONFIG_OF_SEPARATE)
 void *board_fdt_blob_setup(void)
 {
 	static void *fdt_blob = (void *)CONFIG_XILINX_OF_BOARD_DTB_ADDR;
 
-	if (fdt_magic(fdt_blob) != FDT_MAGIC) {
-		printf("DTB is not passed via %p\n", fdt_blob);
-		return NULL;
-	}
+	if (fdt_magic(fdt_blob) == FDT_MAGIC)
+		return fdt_blob;
 
-	return fdt_blob;
+	debug("DTB is not passed via %p\n", fdt_blob);
+
+#ifdef CONFIG_SPL_BUILD
+	/* FDT is at end of BSS unless it is in a different memory region */
+	if (IS_ENABLED(CONFIG_SPL_SEPARATE_BSS))
+		fdt_blob = (ulong *)&_image_binary_end;
+	else
+		fdt_blob = (ulong *)&__bss_end;
+#else
+	/* FDT is at end of image */
+	fdt_blob = (ulong *)&_end;
+#endif
+
+	if (fdt_magic(fdt_blob) == FDT_MAGIC)
+		return fdt_blob;
+
+	debug("DTB is also not passed via %p\n", fdt_blob);
+
+	return NULL;
 }
 #endif
Signature · 1 line
2.24.0
Applied
#3 lore raw

v2 cover Extend board_fdt_blob_setup() to support OF_SEPARATE

In reply to Michal Simek

po 6. 1. 2020 v 10:00 odesílatel Michal Simek <[email protected]> napsal:

Quoted 17 lines

Hi,

it is simply series which align board_fdt_blob_setup() with fdtdec with highest priority on default location where external DTB can be found.

Thanks,
Michal

Changes in v2:
- Fix print messages not to generate compilation warnings on arm32
- Silent all prints

Michal Simek (2):
arm64: zynqmp: Rename fw_dtb variable to fdt_blob
arm64: zynqmp: Add support for OF_SEPARATE with board DTB

Quoted 7 lines
 board/xilinx/Kconfig        |  2 +-
 board/xilinx/common/board.c | 31 ++++++++++++++++++++++++-------
 2 files changed, 25 insertions(+), 8 deletions(-)

--
2.24.0

Applied.
M

Signature · 5 lines
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs