Skip to contentSkip to conversation

Modernise powerpc 40x

PATCH New Christophe Leroy 1 participant 14 messages Apr 25, 2020

Subsystems (10)
lore
Share & tools
lore
#0 lore raw

v4 cover Modernise powerpc 40x

v1 and v2 of this series were aiming at removing 40x entirely, but it led to protests.

v3 is trying to start modernising powerpc 40x:
- Rework TLB miss handlers to not use PTE_ATOMIC_UPDATES and _PAGE_HWWRITE
- Remove old versions of 40x processors, namely 403 and 405GP and associated errata.
- Last two patches are trivial changes in TLB miss handlers to reduce number of scratch registers.

v4:
- Fixing a build failure with patch 2 due to a missing ;
- There was in patch 5 some stuff belonging to patch 6. Moved them.
- Rebased to today's powerpc/merge

I would have liked to test it with QEMU, but I get the following error when trying to start QEMU for machine ref405ep.

qemu-system-ppc: Could not load PowerPC BIOS 'ppc405_rom.bin'

Can someone help with that ?

Christophe Leroy (12):
powerpc/40x: Rework 40x PTE access and TLB miss powerpc/pgtable: Drop PTE_ATOMIC_UPDATES powerpc/40x: Remove support for IBM 403GCX powerpc/40x: Remove STB03xxx
powerpc/40x: Remove WALNUT
powerpc/40x: Remove EP405
powerpc/40x: Remove support for ISS Simulator powerpc/40x: Remove support for IBM 405GP powerpc/40x: Remove IBM405 Erratum #51
powerpc: Remove IBM405 Erratum #77 powerpc/40x: Avoid using r12 in TLB miss handlers powerpc/40x: Don't save CR in SPRN_SPRG_SCRATCH6

Michal Simek (1):
powerpc: Remove Xilinx PPC405/PPC440 support

 Documentation/devicetree/bindings/xilinx.txt | 143 ------
 Documentation/powerpc/bootwrapper.rst        |  28 +-
 arch/powerpc/Kconfig.debug                   |   2 +-
 arch/powerpc/boot/Makefile                   |  14 +-
 arch/powerpc/boot/dts/Makefile               |   1 -
 arch/powerpc/boot/dts/ep405.dts              | 230 ---------
 arch/powerpc/boot/dts/virtex440-ml507.dts    | 406 ----------------
 arch/powerpc/boot/dts/virtex440-ml510.dts    | 466 -------------------
 arch/powerpc/boot/dts/walnut.dts             | 246 ----------
 arch/powerpc/boot/ep405.c                    |  71 ---
 arch/powerpc/boot/ops.h                      |   1 -
 arch/powerpc/boot/serial.c                   |   5 -
 arch/powerpc/boot/treeboot-walnut.c          |  81 ----
 arch/powerpc/boot/uartlite.c                 |  79 ----
 arch/powerpc/boot/virtex.c                   |  97 ----
 arch/powerpc/boot/virtex405-head.S           |  31 --
 arch/powerpc/boot/wrapper                    |   8 -
 arch/powerpc/configs/40x/acadia_defconfig    |   1 -
 arch/powerpc/configs/40x/ep405_defconfig     |  62 ---
 arch/powerpc/configs/40x/kilauea_defconfig   |   1 -
 arch/powerpc/configs/40x/klondike_defconfig  |   1 -
 arch/powerpc/configs/40x/makalu_defconfig    |   1 -
 arch/powerpc/configs/40x/obs600_defconfig    |   1 -
 arch/powerpc/configs/40x/virtex_defconfig    |  75 ---
 arch/powerpc/configs/44x/virtex5_defconfig   |  74 ---
 arch/powerpc/configs/ppc40x_defconfig        |   9 -
 arch/powerpc/configs/ppc44x_defconfig        |   8 -
 arch/powerpc/include/asm/asm-405.h           |  19 -
 arch/powerpc/include/asm/atomic.h            |  11 -
 arch/powerpc/include/asm/bitops.h            |   4 -
 arch/powerpc/include/asm/cache.h             |   2 +-
 arch/powerpc/include/asm/cmpxchg.h           |  11 -
 arch/powerpc/include/asm/futex.h             |   3 -
 arch/powerpc/include/asm/nohash/32/pgtable.h |  33 --
 arch/powerpc/include/asm/nohash/32/pte-40x.h |  23 +-
 arch/powerpc/include/asm/nohash/64/pgtable.h |  27 --
 arch/powerpc/include/asm/nohash/pgtable.h    |   2 -
 arch/powerpc/include/asm/reg_booke.h         |  54 ---
 arch/powerpc/include/asm/spinlock.h          |   4 -
 arch/powerpc/include/asm/time.h              |  12 -
 arch/powerpc/include/asm/xilinx_intc.h       |  16 -
 arch/powerpc/include/asm/xilinx_pci.h        |  21 -
 arch/powerpc/kernel/cputable.c               | 102 ----
 arch/powerpc/kernel/entry_32.S               |  11 -
 arch/powerpc/kernel/head_40x.S               | 316 +++----------
 arch/powerpc/kernel/misc_32.S                |   9 -
 arch/powerpc/kernel/setup-common.c           |   4 -
 arch/powerpc/mm/nohash/40x.c                 |   4 +-
 arch/powerpc/platforms/40x/Kconfig           |  76 ---
 arch/powerpc/platforms/40x/Makefile          |   3 -
 arch/powerpc/platforms/40x/ep405.c           | 123 -----
 arch/powerpc/platforms/40x/virtex.c          |  54 ---
 arch/powerpc/platforms/40x/walnut.c          |  65 ---
 arch/powerpc/platforms/44x/Kconfig           |  40 +-
 arch/powerpc/platforms/44x/Makefile          |   2 -
 arch/powerpc/platforms/44x/virtex.c          |  60 ---
 arch/powerpc/platforms/44x/virtex_ml510.c    |  30 --
 arch/powerpc/platforms/Kconfig               |   4 -
 arch/powerpc/sysdev/Makefile                 |   2 -
 arch/powerpc/sysdev/xilinx_intc.c            |  88 ----
 arch/powerpc/sysdev/xilinx_pci.c             | 132 ------
 drivers/char/Kconfig                         |   2 +-
 drivers/video/fbdev/Kconfig                  |   2 +-
 63 files changed, 83 insertions(+), 3430 deletions(-)
 delete mode 100644 arch/powerpc/boot/dts/ep405.dts
 delete mode 100644 arch/powerpc/boot/dts/virtex440-ml507.dts
 delete mode 100644 arch/powerpc/boot/dts/virtex440-ml510.dts
 delete mode 100644 arch/powerpc/boot/dts/walnut.dts
 delete mode 100644 arch/powerpc/boot/ep405.c
 delete mode 100644 arch/powerpc/boot/treeboot-walnut.c
 delete mode 100644 arch/powerpc/boot/uartlite.c
 delete mode 100644 arch/powerpc/boot/virtex.c
 delete mode 100644 arch/powerpc/boot/virtex405-head.S
 delete mode 100644 arch/powerpc/configs/40x/ep405_defconfig
 delete mode 100644 arch/powerpc/configs/40x/virtex_defconfig
 delete mode 100644 arch/powerpc/configs/44x/virtex5_defconfig
 delete mode 100644 arch/powerpc/include/asm/asm-405.h
 delete mode 100644 arch/powerpc/include/asm/xilinx_intc.h
 delete mode 100644 arch/powerpc/include/asm/xilinx_pci.h
 delete mode 100644 arch/powerpc/platforms/40x/ep405.c
 delete mode 100644 arch/powerpc/platforms/40x/virtex.c
 delete mode 100644 arch/powerpc/platforms/40x/walnut.c
 delete mode 100644 arch/powerpc/platforms/44x/virtex.c
 delete mode 100644 arch/powerpc/platforms/44x/virtex_ml510.c
 delete mode 100644 arch/powerpc/sysdev/xilinx_intc.c
 delete mode 100644 arch/powerpc/sysdev/xilinx_pci.c
Signature · 1 line
2.25.0
#1 lore raw

PATCH v4 1/13 powerpc: Remove Xilinx PPC405/PPC440 support

From: Michal Simek <[email protected]>

The latest Xilinx design tools called ISE and EDK has been released in October 2013. New tool doesn't support any PPC405/PPC440 new designs. These platforms are no longer supported and tested.

PowerPC 405/440 port is orphan from 2013 by
commit cdeb89943bfc ("MAINTAINERS: Fix incorrect status tag") and commit 19624236cce1 ("MAINTAINERS: Update Grant's email address and maintainership") that's why it is time to remove the support fot these platforms.

---
 Documentation/devicetree/bindings/xilinx.txt | 143 ------
 Documentation/powerpc/bootwrapper.rst        |  28 +-
 arch/powerpc/Kconfig.debug                   |   2 +-
 arch/powerpc/boot/Makefile                   |   7 +-
 arch/powerpc/boot/dts/Makefile               |   1 -
 arch/powerpc/boot/dts/virtex440-ml507.dts    | 406 ----------------
 arch/powerpc/boot/dts/virtex440-ml510.dts    | 466 -------------------
 arch/powerpc/boot/ops.h                      |   1 -
 arch/powerpc/boot/serial.c                   |   5 -
 arch/powerpc/boot/uartlite.c                 |  79 ----
 arch/powerpc/boot/virtex.c                   |  97 ----
 arch/powerpc/boot/virtex405-head.S           |  31 --
 arch/powerpc/boot/wrapper                    |   8 -
 arch/powerpc/configs/40x/virtex_defconfig    |  75 ---
 arch/powerpc/configs/44x/virtex5_defconfig   |  74 ---
 arch/powerpc/configs/ppc40x_defconfig        |   8 -
 arch/powerpc/configs/ppc44x_defconfig        |   8 -
 arch/powerpc/include/asm/xilinx_intc.h       |  16 -
 arch/powerpc/include/asm/xilinx_pci.h        |  21 -
 arch/powerpc/kernel/cputable.c               |  39 --
 arch/powerpc/platforms/40x/Kconfig           |  31 --
 arch/powerpc/platforms/40x/Makefile          |   1 -
 arch/powerpc/platforms/40x/virtex.c          |  54 ---
 arch/powerpc/platforms/44x/Kconfig           |  37 --
 arch/powerpc/platforms/44x/Makefile          |   2 -
 arch/powerpc/platforms/44x/virtex.c          |  60 ---
 arch/powerpc/platforms/44x/virtex_ml510.c    |  30 --
 arch/powerpc/platforms/Kconfig               |   4 -
 arch/powerpc/sysdev/Makefile                 |   2 -
 arch/powerpc/sysdev/xilinx_intc.c            |  88 ----
 arch/powerpc/sysdev/xilinx_pci.c             | 132 ------
 drivers/char/Kconfig                         |   2 +-
 drivers/video/fbdev/Kconfig                  |   2 +-
 33 files changed, 7 insertions(+), 1953 deletions(-)
 delete mode 100644 arch/powerpc/boot/dts/virtex440-ml507.dts
 delete mode 100644 arch/powerpc/boot/dts/virtex440-ml510.dts
 delete mode 100644 arch/powerpc/boot/uartlite.c
 delete mode 100644 arch/powerpc/boot/virtex.c
 delete mode 100644 arch/powerpc/boot/virtex405-head.S
 delete mode 100644 arch/powerpc/configs/40x/virtex_defconfig
 delete mode 100644 arch/powerpc/configs/44x/virtex5_defconfig
 delete mode 100644 arch/powerpc/include/asm/xilinx_intc.h
 delete mode 100644 arch/powerpc/include/asm/xilinx_pci.h
 delete mode 100644 arch/powerpc/platforms/40x/virtex.c
 delete mode 100644 arch/powerpc/platforms/44x/virtex.c
 delete mode 100644 arch/powerpc/platforms/44x/virtex_ml510.c
 delete mode 100644 arch/powerpc/sysdev/xilinx_intc.c
 delete mode 100644 arch/powerpc/sysdev/xilinx_pci.c
Documentation/devicetree/bindings/xilinx.txt +0 -143
index d058ace29345..28199b31fe5e 100644
@@ -86,149 +86,6 @@
 		xlnx,use-parity = <0>;
 	};
 
-   Some IP cores actually implement 2 or more logical devices.  In
-   this case, the device should still describe the whole IP core with
-   a single node and add a child node for each logical device.  The
-   ranges property can be used to translate from parent IP-core to the
-   registers of each device.  In addition, the parent node should be
-   compatible with the bus type 'xlnx,compound', and should contain
-   #address-cells and #size-cells, as with any other bus.  (Note: this
-   makes the assumption that both logical devices have the same bus
-   binding.  If this is not true, then separate nodes should be used
-   for each logical device).  The 'cell-index' property can be used to
-   enumerate logical devices within an IP core.  For example, the
-   following is the system.mhs entry for the dual ps2 controller found
-   on the ml403 reference design.
-
-	BEGIN opb_ps2_dual_ref
-		PARAMETER INSTANCE = opb_ps2_dual_ref_0
-		PARAMETER HW_VER = 1.00.a
-		PARAMETER C_BASEADDR = 0xA9000000
-		PARAMETER C_HIGHADDR = 0xA9001FFF
-		BUS_INTERFACE SOPB = opb_v20_0
-		PORT Sys_Intr1 = ps2_1_intr
-		PORT Sys_Intr2 = ps2_2_intr
-		PORT Clkin1 = ps2_clk_rx_1
-		PORT Clkin2 = ps2_clk_rx_2
-		PORT Clkpd1 = ps2_clk_tx_1
-		PORT Clkpd2 = ps2_clk_tx_2
-		PORT Rx1 = ps2_d_rx_1
-		PORT Rx2 = ps2_d_rx_2
-		PORT Txpd1 = ps2_d_tx_1
-		PORT Txpd2 = ps2_d_tx_2
-	END
-
-   It would result in the following device tree nodes:
-
-	opb_ps2_dual_ref_0: opb-ps2-dual-ref@a9000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "xlnx,compound";
-		ranges = <0 a9000000 2000>;
-		// If this device had extra parameters, then they would
-		// go here.
-		ps2@0 {
-			compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
-			reg = <0 40>;
-			interrupt-parent = <&opb_intc_0>;
-			interrupts = <3 0>;
-			cell-index = <0>;
-		};
-		ps2@1000 {
-			compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
-			reg = <1000 40>;
-			interrupt-parent = <&opb_intc_0>;
-			interrupts = <3 0>;
-			cell-index = <0>;
-		};
-	};
-
-   Also, the system.mhs file defines bus attachments from the processor
-   to the devices.  The device tree structure should reflect the bus
-   attachments.  Again an example; this system.mhs fragment:
-
-	BEGIN ppc405_virtex4
-		PARAMETER INSTANCE = ppc405_0
-		PARAMETER HW_VER = 1.01.a
-		BUS_INTERFACE DPLB = plb_v34_0
-		BUS_INTERFACE IPLB = plb_v34_0
-	END
-
-	BEGIN opb_intc
-		PARAMETER INSTANCE = opb_intc_0
-		PARAMETER HW_VER = 1.00.c
-		PARAMETER C_BASEADDR = 0xD1000FC0
-		PARAMETER C_HIGHADDR = 0xD1000FDF
-		BUS_INTERFACE SOPB = opb_v20_0
-	END
-
-	BEGIN opb_uart16550
-		PARAMETER INSTANCE = opb_uart16550_0
-		PARAMETER HW_VER = 1.00.d
-		PARAMETER C_BASEADDR = 0xa0000000
-		PARAMETER C_HIGHADDR = 0xa0001FFF
-		BUS_INTERFACE SOPB = opb_v20_0
-	END
-
-	BEGIN plb_v34
-		PARAMETER INSTANCE = plb_v34_0
-		PARAMETER HW_VER = 1.02.a
-	END
-
-	BEGIN plb_bram_if_cntlr
-		PARAMETER INSTANCE = plb_bram_if_cntlr_0
-		PARAMETER HW_VER = 1.00.b
-		PARAMETER C_BASEADDR = 0xFFFF0000
-		PARAMETER C_HIGHADDR = 0xFFFFFFFF
-		BUS_INTERFACE SPLB = plb_v34_0
-	END
-
-	BEGIN plb2opb_bridge
-		PARAMETER INSTANCE = plb2opb_bridge_0
-		PARAMETER HW_VER = 1.01.a
-		PARAMETER C_RNG0_BASEADDR = 0x20000000
-		PARAMETER C_RNG0_HIGHADDR = 0x3FFFFFFF
-		PARAMETER C_RNG1_BASEADDR = 0x60000000
-		PARAMETER C_RNG1_HIGHADDR = 0x7FFFFFFF
-		PARAMETER C_RNG2_BASEADDR = 0x80000000
-		PARAMETER C_RNG2_HIGHADDR = 0xBFFFFFFF
-		PARAMETER C_RNG3_BASEADDR = 0xC0000000
-		PARAMETER C_RNG3_HIGHADDR = 0xDFFFFFFF
-		BUS_INTERFACE SPLB = plb_v34_0
-		BUS_INTERFACE MOPB = opb_v20_0
-	END
-
-   Gives this device tree (some properties removed for clarity):
-
-	plb@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "xlnx,plb-v34-1.02.a";
-		device_type = "ibm,plb";
-		ranges; // 1:1 translation
-
-		plb_bram_if_cntrl_0: bram@ffff0000 {
-			reg = <ffff0000 10000>;
-		}
-
-		opb@20000000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <20000000 20000000 20000000
-				  60000000 60000000 20000000
-				  80000000 80000000 40000000
-				  c0000000 c0000000 20000000>;
-
-			opb_uart16550_0: serial@a0000000 {
-				reg = <a00000000 2000>;
-			};
-
-			opb_intc_0: interrupt-controller@d1000fc0 {
-				reg = <d1000fc0 20>;
-			};
-		};
-	};
-
    That covers the general approach to binding xilinx IP cores into the
    device tree.  The following are bindings for specific devices:
 
Documentation/powerpc/bootwrapper.rst +2 -26
index a6292afba573..cdfa2bc8425f 100644
@@ -70,28 +70,6 @@ Currently, the following image format targets exist:
 			kernel with this image type and it depends entirely on
 			the embedded device tree for all information.
 
-			The simpleImage is useful for booting systems with
-			an unknown firmware interface or for booting from
-			a debugger when no firmware is present (such as on
-			the Xilinx Virtex platform).  The only assumption that
-			simpleImage makes is that RAM is correctly initialized
-			and that the MMU is either off or has RAM mapped to
-			base address 0.
-
-			simpleImage also supports inserting special platform
-			specific initialization code to the start of the bootup
-			sequence.  The virtex405 platform uses this feature to
-			ensure that the cache is invalidated before caching
-			is enabled.  Platform specific initialization code is
-			added as part of the wrapper script and is keyed on
-			the image target name.  For example, all
-			simpleImage.virtex405-* targets will add the
-			virtex405-head.S initialization code (This also means
-			that the dts file for virtex405 targets should be
-			named (virtex405-<board>.dts).  Search the wrapper
-			script for 'virtex405' and see the file
-			arch/powerpc/boot/virtex405-head.S for details.
-
    treeImage.%;		Image format for used with OpenBIOS firmware found
 			on some ppc4xx hardware.  This image embeds a device
 			tree blob inside the image.
@@ -116,10 +94,8 @@ Image types which embed a device tree blob (simpleImage, dtbImage, treeImage,
 and cuImage) all generate the device tree blob from a file in the
 arch/powerpc/boot/dts/ directory.  The Makefile selects the correct device
 tree source based on the name of the target.  Therefore, if the kernel is
-built with 'make treeImage.walnut simpleImage.virtex405-ml403', then the
-build system will use arch/powerpc/boot/dts/walnut.dts to build
-treeImage.walnut and arch/powerpc/boot/dts/virtex405-ml403.dts to build
-the simpleImage.virtex405-ml403.
+built with 'make treeImage.walnut', then the build system will use
+arch/powerpc/boot/dts/walnut.dts to build treeImage.walnut.
 
 Two special targets called 'zImage' and 'zImage.initrd' also exist.  These
 targets build all the default images as selected by the kernel configuration.
arch/powerpc/Kconfig.debug +1 -1
index 0b063830eea8..b88900f4832f 100644
@@ -230,7 +230,7 @@ config PPC_EARLY_DEBUG_40x
 	help
 	  Select this to enable early debugging for IBM 40x chips via the
 	  inbuilt serial port. This works on chips with a 16550 compatible
-	  UART. Xilinx chips with uartlite cannot use this option.
+	  UART.
 
 config PPC_EARLY_DEBUG_CPM
 	bool "Early serial debugging for Freescale CPM-based serial ports"
arch/powerpc/boot/Makefile +2 -5
index c53a1b8bba8b..d8077b7071dd 100644
@@ -79,7 +79,6 @@ $(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
 $(obj)/treeboot-iss4xx.o: BOOTCFLAGS += -mcpu=405
 $(obj)/treeboot-currituck.o: BOOTCFLAGS += -mcpu=405
 $(obj)/treeboot-akebono.o: BOOTCFLAGS += -mcpu=405
-$(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405
 
 # The pre-boot decompressors pull in a lot of kernel headers and other source
 # files. This creates a bit of a dependency headache since we need to copy
@@ -129,14 +128,12 @@ src-wlib-$(CONFIG_44x) += 4xx.c ebony.c bamboo.c
 src-wlib-$(CONFIG_PPC_8xx) += mpc8xx.c planetcore.c fsl-soc.c
 src-wlib-$(CONFIG_PPC_82xx) += pq2.c fsl-soc.c planetcore.c
 src-wlib-$(CONFIG_EMBEDDED6xx) += ugecon.c fsl-soc.c
-src-wlib-$(CONFIG_XILINX_VIRTEX) += uartlite.c
 src-wlib-$(CONFIG_CPM) += cpm-serial.c
 
 src-plat-y := of.c epapr.c
 src-plat-$(CONFIG_40x) += fixed-head.S ep405.c cuboot-hotfoot.c \
 				treeboot-walnut.c cuboot-acadia.c \
-				cuboot-kilauea.c simpleboot.c \
-				virtex405-head.S virtex.c
+				cuboot-kilauea.c simpleboot.c
 src-plat-$(CONFIG_44x) += treeboot-ebony.c cuboot-ebony.c treeboot-bamboo.c \
 				cuboot-bamboo.c cuboot-sam440ep.c \
 				cuboot-sequoia.c cuboot-rainier.c \
@@ -144,7 +141,7 @@ src-plat-$(CONFIG_44x) += treeboot-ebony.c cuboot-ebony.c treeboot-bamboo.c \
 				cuboot-warp.c cuboot-yosemite.c \
 				treeboot-iss4xx.c treeboot-currituck.c \
 				treeboot-akebono.c \
-				simpleboot.c fixed-head.S virtex.c
+				simpleboot.c fixed-head.S
 src-plat-$(CONFIG_PPC_8xx) += cuboot-8xx.c fixed-head.S ep88xc.c redboot-8xx.c
 src-plat-$(CONFIG_PPC_MPC52xx) += cuboot-52xx.c
 src-plat-$(CONFIG_PPC_82xx) += cuboot-pq2.c fixed-head.S ep8248e.c cuboot-824x.c
arch/powerpc/boot/dts/Makefile +0 -1
index 1cbc0e4ce857..fb335d05aae8 100644
@@ -4,4 +4,3 @@ subdir-y += fsl
 
 dtstree		:= $(srctree)/$(src)
 dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts))
-dtb-$(CONFIG_XILINX_VIRTEX440_GENERIC_BOARD) += virtex440-ml507.dtb virtex440-ml510.dtb
arch/powerpc/boot/dts/virtex440-ml507.dts deleted +0 -406

406 lines not on this page · raw message

arch/powerpc/boot/dts/virtex440-ml510.dts deleted +0 -466

466 lines not on this page · raw message

arch/powerpc/boot/ops.h +0 -1
index e0606766480f..6455fc9a244f 100644
@@ -88,7 +88,6 @@ int serial_console_init(void);
 int ns16550_console_init(void *devp, struct serial_console_data *scdp);
 int cpm_console_init(void *devp, struct serial_console_data *scdp);
 int mpc5200_psc_console_init(void *devp, struct serial_console_data *scdp);
-int uartlite_console_init(void *devp, struct serial_console_data *scdp);
 int opal_console_init(void *devp, struct serial_console_data *scdp);
 void *simple_alloc_init(char *base, unsigned long heap_size,
 			unsigned long granularity, unsigned long max_allocs);
arch/powerpc/boot/serial.c +0 -5
index 9457863147f9..0bfa7e87e546 100644
@@ -132,11 +132,6 @@ int serial_console_init(void)
 	else if (dt_is_compatible(devp, "fsl,mpc5200-psc-uart"))
 		rc = mpc5200_psc_console_init(devp, &serial_cd);
 #endif
-#ifdef CONFIG_XILINX_VIRTEX
-	else if (dt_is_compatible(devp, "xlnx,opb-uartlite-1.00.b") ||
-		 dt_is_compatible(devp, "xlnx,xps-uartlite-1.00.a"))
-		rc = uartlite_console_init(devp, &serial_cd);
-#endif
 #ifdef CONFIG_PPC64_BOOT_WRAPPER
 	else if (dt_is_compatible(devp, "ibm,opal-console-raw"))
 		rc = opal_console_init(devp, &serial_cd);
arch/powerpc/boot/uartlite.c deleted +0 -79

79 lines not on this page · raw message

arch/powerpc/boot/virtex.c deleted +0 -97

97 lines not on this page · raw message

arch/powerpc/boot/virtex405-head.S deleted +0 -31
deleted file mode 100644
index 00bab7d7c48c..000000000000
@@ -1,31 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include "ppc_asm.h"
-
-	.text
-	.global _zimage_start
-_zimage_start:
-
-	/* PPC errata 213: needed by Virtex-4 FX */
-	mfccr0  0
-	oris    0,0,0x50000000@h
-	mtccr0  0
-
-	/*
-	 * Invalidate the data cache if the data cache is turned off.
-	 * - The 405 core does not invalidate the data cache on power-up
-	 *   or reset but does turn off the data cache. We cannot assume
-	 *   that the cache contents are valid.
-	 * - If the data cache is turned on this must have been done by
-	 *   a bootloader and we assume that the cache contents are
-	 *   valid.
-	 */
-	mfdccr	r9
-	cmplwi	r9,0
-	bne	2f
-	lis	r9,0
-	li	r8,256
-	mtctr	r8
-1:	dccci	r0,r9
-	addi	r9,r9,0x20
-	bdnz	1b
-2:	b	_zimage_start_lib
arch/powerpc/boot/wrapper +0 -8
index ed6266367bc0..de5fd5a047e8 100755
@@ -323,14 +323,6 @@ adder875-redboot)
     platformo="$object/fixed-head.o $object/redboot-8xx.o"
     binary=y
     ;;
-simpleboot-virtex405-*)
-    platformo="$object/virtex405-head.o $object/simpleboot.o $object/virtex.o"
-    binary=y
-    ;;
-simpleboot-virtex440-*)
-    platformo="$object/fixed-head.o $object/simpleboot.o $object/virtex.o"
-    binary=y
-    ;;
 simpleboot-*)
     platformo="$object/fixed-head.o $object/simpleboot.o"
     binary=y
arch/powerpc/configs/40x/virtex_defconfig deleted +0 -75

75 lines not on this page · raw message

arch/powerpc/configs/44x/virtex5_defconfig deleted +0 -74

74 lines not on this page · raw message

arch/powerpc/configs/ppc40x_defconfig +0 -8
index a5f683aed328..88960a72b525 100644
@@ -14,7 +14,6 @@ CONFIG_EP405=y
 CONFIG_HOTFOOT=y
 CONFIG_KILAUEA=y
 CONFIG_MAKALU=y
-CONFIG_XILINX_VIRTEX_GENERIC_BOARD=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -37,33 +36,26 @@ CONFIG_MTD_UBI=m
 CONFIG_MTD_UBI_GLUEBI=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=35000
-CONFIG_XILINX_SYSACE=m
 CONFIG_NETDEVICES=y
 CONFIG_IBM_EMAC=y
 # CONFIG_INPUT is not set
 CONFIG_SERIO=m
 # CONFIG_SERIO_I8042 is not set
 # CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_XILINX_XPS_PS2=m
 # CONFIG_VT is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SERIAL_UARTLITE=y
-CONFIG_SERIAL_UARTLITE_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
-CONFIG_XILINX_HWICAP=m
 CONFIG_I2C=m
 CONFIG_I2C_CHARDEV=m
 CONFIG_I2C_GPIO=m
 CONFIG_I2C_IBM_IIC=m
-CONFIG_GPIO_XILINX=y
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
 CONFIG_FB=m
-CONFIG_FB_XILINX=m
 CONFIG_EXT2_FS=y
 CONFIG_EXT4_FS=m
 CONFIG_VFAT_FS=m
arch/powerpc/configs/ppc44x_defconfig +0 -8
index a41eedfe0a5f..8b595f67068c 100644
@@ -22,7 +22,6 @@ CONFIG_GLACIER=y
 CONFIG_REDWOOD=y
 CONFIG_EIGER=y
 CONFIG_YOSEMITE=y
-CONFIG_XILINX_VIRTEX440_GENERIC_BOARD=y
 CONFIG_PPC4xx_GPIO=y
 CONFIG_MATH_EMULATION=y
 CONFIG_NET=y
@@ -46,7 +45,6 @@ CONFIG_MTD_UBI=m
 CONFIG_MTD_UBI_GLUEBI=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=35000
-CONFIG_XILINX_SYSACE=m
 CONFIG_SCSI=m
 CONFIG_BLK_DEV_SD=m
 # CONFIG_SCSI_LOWLEVEL is not set
@@ -57,7 +55,6 @@ CONFIG_IBM_EMAC=y
 CONFIG_SERIO=m
 # CONFIG_SERIO_I8042 is not set
 # CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_XILINX_XPS_PS2=m
 # CONFIG_VT is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
@@ -65,18 +62,13 @@ CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SERIAL_UARTLITE=y
-CONFIG_SERIAL_UARTLITE_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
-CONFIG_XILINX_HWICAP=m
 CONFIG_I2C=m
 CONFIG_I2C_CHARDEV=m
 CONFIG_I2C_GPIO=m
 CONFIG_I2C_IBM_IIC=m
-CONFIG_GPIO_XILINX=y
 # CONFIG_HWMON is not set
 CONFIG_FB=m
-CONFIG_FB_XILINX=m
 CONFIG_USB=m
 CONFIG_USB_EHCI_HCD=m
 CONFIG_USB_OHCI_HCD=m
arch/powerpc/include/asm/xilinx_intc.h deleted +0 -16
deleted file mode 100644
index ca9aa162fb09..000000000000
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Xilinx intc external definitions
- *
- * Copyright 2007 Secret Lab Technologies Ltd.
- */
-#ifndef _ASM_POWERPC_XILINX_INTC_H
-#define _ASM_POWERPC_XILINX_INTC_H
-
-#ifdef __KERNEL__
-
-extern void __init xilinx_intc_init_tree(void);
-extern unsigned int xintc_get_irq(void);
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_XILINX_INTC_H */
arch/powerpc/include/asm/xilinx_pci.h deleted +0 -21
deleted file mode 100644
index 7a8275caf6af..000000000000
@@ -1,21 +0,0 @@
-/*
- * Xilinx pci external definitions
- *
- * Copyright 2009 Roderick Colenbrander
- * Copyright 2009 Secret Lab Technologies Ltd.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#ifndef INCLUDE_XILINX_PCI
-#define INCLUDE_XILINX_PCI
-
-#ifdef CONFIG_XILINX_PCI
-extern void __init xilinx_pci_init(void);
-#else
-static inline void __init xilinx_pci_init(void) { return; }
-#endif
-
-#endif /* INCLUDE_XILINX_PCI */
arch/powerpc/kernel/cputable.c +0 -39
index 13eba2eb46fe..cae9764b929e 100644
@@ -1385,32 +1385,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.machine_check		= machine_check_4xx,
 		.platform		= "ppc405",
 	},
-	{	/* Xilinx Virtex-II Pro  */
-		.pvr_mask		= 0xfffff000,
-		.pvr_value		= 0x20010000,
-		.cpu_name		= "Virtex-II Pro",
-		.cpu_features		= CPU_FTRS_40X,
-		.cpu_user_features	= PPC_FEATURE_32 |
-			PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
-		.mmu_features		= MMU_FTR_TYPE_40x,
-		.icache_bsize		= 32,
-		.dcache_bsize		= 32,
-		.machine_check		= machine_check_4xx,
-		.platform		= "ppc405",
-	},
-	{	/* Xilinx Virtex-4 FX */
-		.pvr_mask		= 0xfffff000,
-		.pvr_value		= 0x20011000,
-		.cpu_name		= "Virtex-4 FX",
-		.cpu_features		= CPU_FTRS_40X,
-		.cpu_user_features	= PPC_FEATURE_32 |
-			PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
-		.mmu_features		= MMU_FTR_TYPE_40x,
-		.icache_bsize		= 32,
-		.dcache_bsize		= 32,
-		.machine_check		= machine_check_4xx,
-		.platform		= "ppc405",
-	},
 	{	/* 405EP */
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x51210000,
@@ -1800,19 +1774,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.machine_check		= machine_check_440A,
 		.platform		= "ppc440",
 	},
-	{ /* 440 in Xilinx Virtex-5 FXT */
-		.pvr_mask		= 0xfffffff0,
-		.pvr_value		= 0x7ff21910,
-		.cpu_name		= "440 in Virtex-5 FXT",
-		.cpu_features		= CPU_FTRS_44X,
-		.cpu_user_features	= COMMON_USER_BOOKE,
-		.mmu_features		= MMU_FTR_TYPE_44x,
-		.icache_bsize		= 32,
-		.dcache_bsize		= 32,
-		.cpu_setup		= __setup_cpu_440x5,
-		.machine_check		= machine_check_440A,
-		.platform		= "ppc440",
-	},
 	{ /* 460EX */
 		.pvr_mask		= 0xffff0006,
 		.pvr_value		= 0x13020002,
arch/powerpc/platforms/40x/Kconfig +0 -31
index 6da813b65b42..d06ca51e8443 100644
@@ -55,23 +55,6 @@ config WALNUT
 	help
 	  This option enables support for the IBM PPC405GP evaluation board.
 
-config XILINX_VIRTEX_GENERIC_BOARD
-	bool "Generic Xilinx Virtex board"
-	depends on 40x
-	select XILINX_VIRTEX_II_PRO
-	select XILINX_VIRTEX_4_FX
-	select XILINX_INTC
-	help
-	  This option enables generic support for Xilinx Virtex based boards.
-
-	  The generic virtex board support matches any device tree which
-	  specifies 'xilinx,virtex' in its compatible field.  This includes
-	  the Xilinx ML3xx and ML4xx reference designs using the powerpc
-	  core.
-
-	  Most Virtex designs should use this unless it needs to do some
-	  special configuration at board probe time.
-
 config OBS600
 	bool "OpenBlockS 600"
 	depends on 40x
@@ -109,20 +92,6 @@ config 405EZ
 	select IBM_EMAC_MAL_CLR_ICINTSTAT if IBM_EMAC
 	select IBM_EMAC_MAL_COMMON_ERR if IBM_EMAC
 
-config XILINX_VIRTEX
-	bool
-	select DEFAULT_UIMAGE
-
-config XILINX_VIRTEX_II_PRO
-	bool
-	select XILINX_VIRTEX
-	select IBM405_ERR77
-	select IBM405_ERR51
-
-config XILINX_VIRTEX_4_FX
-	bool
-	select XILINX_VIRTEX
-
 config STB03xxx
 	bool
 	select IBM405_ERR77
arch/powerpc/platforms/40x/Makefile +0 -1
index 828d78340dd9..e9386deed505 100644
@@ -1,5 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0-only
 obj-$(CONFIG_WALNUT)				+= walnut.o
-obj-$(CONFIG_XILINX_VIRTEX_GENERIC_BOARD)	+= virtex.o
 obj-$(CONFIG_EP405)				+= ep405.o
 obj-$(CONFIG_PPC40x_SIMPLE)		+= ppc40x_simple.o
arch/powerpc/platforms/40x/virtex.c deleted +0 -54

54 lines not on this page · raw message

arch/powerpc/platforms/44x/Kconfig +0 -37
index 25ebe634a661..39e93d23fb38 100644
@@ -232,33 +232,6 @@ config ICON
 	help
 	  This option enables support for the AMCC PPC440SPe evaluation board.
 
-config XILINX_VIRTEX440_GENERIC_BOARD
-	bool "Generic Xilinx Virtex 5 FXT board support"
-	depends on 44x
-	select XILINX_VIRTEX_5_FXT
-	select XILINX_INTC
-	help
-	  This option enables generic support for Xilinx Virtex based boards
-	  that use a 440 based processor in the Virtex 5 FXT FPGA architecture.
-
-	  The generic virtex board support matches any device tree which
-	  specifies 'xlnx,virtex440' in its compatible field.  This includes
-	  the Xilinx ML5xx reference designs using the powerpc core.
-
-	  Most Virtex 5 designs should use this unless it needs to do some
-	  special configuration at board probe time.
-
-config XILINX_ML510
-	bool "Xilinx ML510 extra support"
-	depends on XILINX_VIRTEX440_GENERIC_BOARD
-	select HAVE_PCI
-	select XILINX_PCI if PCI
-	select PPC_INDIRECT_PCI if PCI
-	select PPC_I8259 if PCI
-	help
-	  This option enables extra support for features on the Xilinx ML510
-	  board.  The ML510 has a PCI bus with ALI south bridge.
-
 config PPC44x_SIMPLE
 	bool "Simple PowerPC 44x board support"
 	depends on 44x
@@ -354,13 +327,3 @@ config 476FPE_ERR46
 config IBM440EP_ERR42
 	bool
 
-# Xilinx specific config options.
-config XILINX_VIRTEX
-	bool
-	select DEFAULT_UIMAGE
-
-# Xilinx Virtex 5 FXT FPGA architecture, selected by a Xilinx board above
-config XILINX_VIRTEX_5_FXT
-	bool
-	select XILINX_VIRTEX
-
arch/powerpc/platforms/44x/Makefile +0 -2
index 1b78c6af821a..5ba031f57652 100644
@@ -7,8 +7,6 @@ obj-$(CONFIG_PPC44x_SIMPLE) += ppc44x_simple.o
 obj-$(CONFIG_EBONY)	+= ebony.o
 obj-$(CONFIG_SAM440EP) 	+= sam440ep.o
 obj-$(CONFIG_WARP)	+= warp.o
-obj-$(CONFIG_XILINX_VIRTEX_5_FXT) += virtex.o
-obj-$(CONFIG_XILINX_ML510) += virtex_ml510.o
 obj-$(CONFIG_ISS4xx)	+= iss4xx.o
 obj-$(CONFIG_CANYONLANDS)+= canyonlands.o
 obj-$(CONFIG_CURRITUCK)	+= ppc476.o
arch/powerpc/platforms/44x/virtex.c deleted +0 -60

60 lines not on this page · raw message

arch/powerpc/platforms/44x/virtex_ml510.c deleted +0 -30
deleted file mode 100644
index 349f218b335c..000000000000
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <asm/i8259.h>
-#include <linux/pci.h>
-#include "44x.h"
-
-/**
- * ml510_ail_quirk
- */
-static void ml510_ali_quirk(struct pci_dev *dev)
-{
-	/* Enable the IDE controller */
-	pci_write_config_byte(dev, 0x58, 0x4c);
-	/* Assign irq 14 to the primary ide channel */
-	pci_write_config_byte(dev, 0x44, 0x0d);
-	/* Assign irq 15 to the secondary ide channel */
-	pci_write_config_byte(dev, 0x75, 0x0f);
-	/* Set the ide controller in native mode */
-	pci_write_config_byte(dev, 0x09, 0xff);
-
-	/* INTB = disabled, INTA = disabled */
-	pci_write_config_byte(dev, 0x48, 0x00);
-	/* INTD = disabled, INTC = disabled */
-	pci_write_config_byte(dev, 0x4a, 0x00);
-	/* Audio = INT7, Modem = disabled. */
-	pci_write_config_byte(dev, 0x4b, 0x60);
-	/* USB = INT7 */
-	pci_write_config_byte(dev, 0x74, 0x06);
-}
-DECLARE_PCI_FIXUP_EARLY(0x10b9, 0x1533, ml510_ali_quirk);
-
arch/powerpc/platforms/Kconfig +0 -4
index 1f8025383caa..5e6479d409a0 100644
@@ -317,8 +317,4 @@ config MCU_MPC8349EMITX
 	  also register MCU GPIOs with the generic GPIO API, so you'll able
 	  to use MCU pins as GPIOs.
 
-config XILINX_PCI
-	bool "Xilinx PCI host bridge support"
-	depends on PCI && XILINX_VIRTEX
-
 endmenu
arch/powerpc/sysdev/Makefile +0 -2
index cb5a5bd2cef5..026b3f01a991 100644
@@ -31,8 +31,6 @@ obj-$(CONFIG_RTC_DRV_CMOS)	+= rtc_cmos_setup.o
 obj-$(CONFIG_PPC_INDIRECT_PCI)	+= indirect_pci.o
 obj-$(CONFIG_PPC_I8259)		+= i8259.o
 obj-$(CONFIG_IPIC)		+= ipic.o
-obj-$(CONFIG_XILINX_VIRTEX)	+= xilinx_intc.o
-obj-$(CONFIG_XILINX_PCI)	+= xilinx_pci.o
 obj-$(CONFIG_OF_RTC)		+= of_rtc.o
 
 obj-$(CONFIG_CPM)		+= cpm_common.o
arch/powerpc/sysdev/xilinx_intc.c deleted +0 -88

88 lines not on this page · raw message

arch/powerpc/sysdev/xilinx_pci.c deleted +0 -132

132 lines not on this page · raw message

drivers/char/Kconfig +1 -1
index d4665fe9ccd2..ac25833eb19e 100644
@@ -209,7 +209,7 @@ config DTLK
 
 config XILINX_HWICAP
 	tristate "Xilinx HWICAP Support"
-	depends on XILINX_VIRTEX || MICROBLAZE
+	depends on MICROBLAZE
 	help
 	  This option enables support for Xilinx Internal Configuration
 	  Access Port (ICAP) driver.  The ICAP is used on Xilinx Virtex
drivers/video/fbdev/Kconfig +1 -1
index 91b0a719d221..8c720df78113 100644
@@ -2008,7 +2008,7 @@ config FB_PS3_DEFAULT_SIZE_M
 
 config FB_XILINX
 	tristate "Xilinx frame buffer support"
-	depends on FB && (XILINX_VIRTEX || MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP)
+	depends on FB && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP)
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
Signature · 1 line
2.25.0
#2 lore raw

PATCH v4 2/13 powerpc/40x: Rework 40x PTE access and TLB miss

In reply to Christophe Leroy

Commit 1bc54c03117b ("powerpc: rework 4xx PTE access and TLB miss") reworked 44x PTE access to avoid atomic pte updates, and left 8xx, 40x and fsl booke with atomic pte updates. Commit 6cfd8990e27d ("powerpc: rework FSL Book-E PTE access and TLB miss") removed atomic pte updates on fsl booke.
It went away on 8xx with commit ddfc20a3b9ae ("powerpc/8xx: Remove PTE_ATOMIC_UPDATES").

40x is the last platform setting PTE_ATOMIC_UPDATES.

Rework PTE access and TLB miss to remove PTE_ATOMIC_UPDATES for 40x:
- Always handle DSI as a fault.
- Bail out of TLB miss handler when CONFIG_SWAP is set and _PAGE_ACCESSED is not set.
- Bail out of ITLB miss handler when _PAGE_EXEC is not set.
- Only set WR bit when both _PAGE_RW and _PAGE_DIRTY are set.
- Remove _PAGE_HWWRITE
- Don't require PTE_ATOMIC_UPDATES anymore

---
v4: Fixed build failure (missing ;)

---
 arch/powerpc/include/asm/nohash/32/pte-40x.h |  23 +--
 arch/powerpc/include/asm/nohash/pgtable.h    |   2 -
 arch/powerpc/kernel/head_40x.S               | 177 +++----------------
 arch/powerpc/mm/nohash/40x.c                 |   4 +-
 4 files changed, 34 insertions(+), 172 deletions(-)
arch/powerpc/include/asm/nohash/32/pte-40x.h +3 -20
index 12c6811e344b..2d3153cfc0d7 100644
@@ -44,9 +44,8 @@
 #define	_PAGE_WRITETHRU	0x008	/* W: caching is write-through */
 #define	_PAGE_USER	0x010	/* matches one of the zone permission bits */
 #define	_PAGE_SPECIAL	0x020	/* software: Special page */
-#define	_PAGE_RW	0x040	/* software: Writes permitted */
 #define	_PAGE_DIRTY	0x080	/* software: dirty page */
-#define _PAGE_HWWRITE	0x100	/* hardware: Dirty & RW, set in exception */
+#define _PAGE_RW	0x100	/* hardware: WR, anded with dirty in exception */
 #define _PAGE_EXEC	0x200	/* hardware: EX permission */
 #define _PAGE_ACCESSED	0x400	/* software: R: page referenced */
 
@@ -58,8 +57,8 @@
 
 #define _PAGE_KERNEL_RO		0
 #define _PAGE_KERNEL_ROX	_PAGE_EXEC
-#define _PAGE_KERNEL_RW		(_PAGE_DIRTY | _PAGE_RW | _PAGE_HWWRITE)
-#define _PAGE_KERNEL_RWX	(_PAGE_DIRTY | _PAGE_RW | _PAGE_HWWRITE | _PAGE_EXEC)
+#define _PAGE_KERNEL_RW		(_PAGE_DIRTY | _PAGE_RW)
+#define _PAGE_KERNEL_RWX	(_PAGE_DIRTY | _PAGE_RW | _PAGE_EXEC)
 
 #define _PMD_PRESENT	0x400	/* PMD points to page of PTEs */
 #define _PMD_PRESENT_MASK	_PMD_PRESENT
@@ -85,21 +84,5 @@
 #define PAGE_READONLY	__pgprot(_PAGE_BASE | _PAGE_USER)
 #define PAGE_READONLY_X	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
 
-#ifndef __ASSEMBLY__
-static inline pte_t pte_wrprotect(pte_t pte)
-{
-	return __pte(pte_val(pte) & ~(_PAGE_RW | _PAGE_HWWRITE));
-}
-
-#define pte_wrprotect pte_wrprotect
-
-static inline pte_t pte_mkclean(pte_t pte)
-{
-	return __pte(pte_val(pte) & ~(_PAGE_DIRTY | _PAGE_HWWRITE));
-}
-
-#define pte_mkclean pte_mkclean
-#endif
-
 #endif /* __KERNEL__ */
 #endif /*  _ASM_POWERPC_NOHASH_32_PTE_40x_H */
arch/powerpc/include/asm/nohash/pgtable.h +0 -2
index 7fed9dc0f147..21e4d0d3eb3b 100644
@@ -130,12 +130,10 @@ static inline pte_t pte_exprotect(pte_t pte)
 	return __pte(pte_val(pte) & ~_PAGE_EXEC);
 }
 
-#ifndef pte_mkclean
 static inline pte_t pte_mkclean(pte_t pte)
 {
 	return __pte(pte_val(pte) & ~_PAGE_DIRTY);
 }
-#endif
 
 static inline pte_t pte_mkold(pte_t pte)
 {
arch/powerpc/kernel/head_40x.S +29 -148

211 lines not on this page · raw message

arch/powerpc/mm/nohash/40x.c +2 -2
index 82862723ab42..4eaf462cda30 100644
@@ -102,7 +102,7 @@ unsigned long __init mmu_mapin_ram(unsigned long base, unsigned long top)
 
 	while (s >= LARGE_PAGE_SIZE_16M) {
 		pmd_t *pmdp;
-		unsigned long val = p | _PMD_SIZE_16M | _PAGE_EXEC | _PAGE_HWWRITE;
+		unsigned long val = p | _PMD_SIZE_16M | _PAGE_EXEC | _PAGE_RW;
 
 		pmdp = pmd_ptr_k(v);
 		*pmdp++ = __pmd(val);
@@ -117,7 +117,7 @@ unsigned long __init mmu_mapin_ram(unsigned long base, unsigned long top)
 
 	while (s >= LARGE_PAGE_SIZE_4M) {
 		pmd_t *pmdp;
-		unsigned long val = p | _PMD_SIZE_4M | _PAGE_EXEC | _PAGE_HWWRITE;
+		unsigned long val = p | _PMD_SIZE_4M | _PAGE_EXEC | _PAGE_RW;
 
 		pmdp = pmd_ptr_k(v);
 		*pmdp = __pmd(val);
Signature · 1 line
2.25.0
#3 lore raw

PATCH v4 3/13 powerpc/pgtable: Drop PTE_ATOMIC_UPDATES

In reply to Christophe Leroy

40x was the last user of PTE_ATOMIC_UPDATES.

Drop everything related to PTE_ATOMIC_UPDATES.

---
 arch/powerpc/include/asm/nohash/32/pgtable.h | 32 --------------------
 arch/powerpc/include/asm/nohash/64/pgtable.h | 27 -----------------
 2 files changed, 59 deletions(-)
arch/powerpc/include/asm/nohash/32/pgtable.h +0 -32
index b04ba257fddb..fdbfcc44fea8 100644
@@ -227,20 +227,6 @@ static inline unsigned long pte_update(pte_t *p,
 				       unsigned long clr,
 				       unsigned long set)
 {
-#ifdef PTE_ATOMIC_UPDATES
-	unsigned long old, tmp;
-
-	__asm__ __volatile__("\
-1:	lwarx	%0,0,%3\n\
-	andc	%1,%0,%4\n\
-	or	%1,%1,%5\n"
-	PPC405_ERR77(0,%3)
-"	stwcx.	%1,0,%3\n\
-	bne-	1b"
-	: "=&r" (old), "=&r" (tmp), "=m" (*p)
-	: "r" (p), "r" (clr), "r" (set), "m" (*p)
-	: "cc" );
-#else /* PTE_ATOMIC_UPDATES */
 	unsigned long old = pte_val(*p);
 	unsigned long new = (old & ~clr) | set;
 
@@ -249,7 +235,6 @@ static inline unsigned long pte_update(pte_t *p,
 #else
 	*p = __pte(new);
 #endif
-#endif /* !PTE_ATOMIC_UPDATES */
 
 #ifdef CONFIG_44x
 	if ((old & _PAGE_USER) && (old & _PAGE_EXEC))
@@ -262,25 +247,8 @@ static inline unsigned long long pte_update(pte_t *p,
 					    unsigned long clr,
 					    unsigned long set)
 {
-#ifdef PTE_ATOMIC_UPDATES
-	unsigned long long old;
-	unsigned long tmp;
-
-	__asm__ __volatile__("\
-1:	lwarx	%L0,0,%4\n\
-	lwzx	%0,0,%3\n\
-	andc	%1,%L0,%5\n\
-	or	%1,%1,%6\n"
-	PPC405_ERR77(0,%3)
-"	stwcx.	%1,0,%4\n\
-	bne-	1b"
-	: "=&r" (old), "=&r" (tmp), "=m" (*p)
-	: "r" (p), "r" ((unsigned long)(p) + 4), "r" (clr), "r" (set), "m" (*p)
-	: "cc" );
-#else /* PTE_ATOMIC_UPDATES */
 	unsigned long long old = pte_val(*p);
 	*p = __pte((old & ~(unsigned long long)clr) | set);
-#endif /* !PTE_ATOMIC_UPDATES */
 
 #ifdef CONFIG_44x
 	if ((old & _PAGE_USER) && (old & _PAGE_EXEC))
arch/powerpc/include/asm/nohash/64/pgtable.h +0 -27
index 9a33b8bd842d..3cacace9bfa0 100644
@@ -211,22 +211,8 @@ static inline unsigned long pte_update(struct mm_struct *mm,
 				       unsigned long set,
 				       int huge)
 {
-#ifdef PTE_ATOMIC_UPDATES
-	unsigned long old, tmp;
-
-	__asm__ __volatile__(
-	"1:	ldarx	%0,0,%3		# pte_update\n\
-	andc	%1,%0,%4 \n\
-	or	%1,%1,%6\n\
-	stdcx.	%1,0,%3 \n\
-	bne-	1b"
-	: "=&r" (old), "=&r" (tmp), "=m" (*ptep)
-	: "r" (ptep), "r" (clr), "m" (*ptep), "r" (set)
-	: "cc" );
-#else
 	unsigned long old = pte_val(*ptep);
 	*ptep = __pte((old & ~clr) | set);
-#endif
 	/* huge pages use the old page table lock */
 	if (!huge)
 		assert_pte_locked(mm, addr);
@@ -310,21 +296,8 @@ static inline void __ptep_set_access_flags(struct vm_area_struct *vma,
 	unsigned long bits = pte_val(entry) &
 		(_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW | _PAGE_EXEC);
 
-#ifdef PTE_ATOMIC_UPDATES
-	unsigned long old, tmp;
-
-	__asm__ __volatile__(
-	"1:	ldarx	%0,0,%4\n\
-		or	%0,%3,%0\n\
-		stdcx.	%0,0,%4\n\
-		bne-	1b"
-	:"=&r" (old), "=&r" (tmp), "=m" (*ptep)
-	:"r" (bits), "r" (ptep), "m" (*ptep)
-	:"cc");
-#else
 	unsigned long old = pte_val(*ptep);
 	*ptep = __pte(old | bits);
-#endif
 
 	flush_tlb_page(vma, address);
 }
Signature · 1 line
2.25.0
#4 lore raw

PATCH v4 4/13 powerpc/40x: Remove support for IBM 403GCX

In reply to Christophe Leroy

CONFIG_403GCX is not user selectable and is not
selected by any platform.

Remove it.

---
 arch/powerpc/include/asm/cache.h     |  2 +-
 arch/powerpc/include/asm/reg_booke.h | 54 ----------------------------
 arch/powerpc/include/asm/time.h      | 12 -------
 arch/powerpc/kernel/cputable.c       | 37 -------------------
 arch/powerpc/kernel/head_40x.S       | 45 -----------------------
 arch/powerpc/kernel/misc_32.S        |  9 -----
 arch/powerpc/kernel/setup-common.c   |  4 ---
 arch/powerpc/platforms/40x/Kconfig   |  6 ----
 8 files changed, 1 insertion(+), 168 deletions(-)
arch/powerpc/include/asm/cache.h +1 -1
index 609cab1d58f2..2124b7090db9 100644
@@ -6,7 +6,7 @@
 
 
 /* bytes per L1 cache line */
-#if defined(CONFIG_PPC_8xx) || defined(CONFIG_403GCX)
+#if defined(CONFIG_PPC_8xx)
 #define L1_CACHE_SHIFT		4
 #define MAX_COPY_PREFETCH	1
 #define IFETCH_ALIGN_SHIFT	2
arch/powerpc/include/asm/reg_booke.h +0 -54

60 lines not on this page · raw message

arch/powerpc/include/asm/time.h +0 -12
index 39ce95016a3a..b287cfc2dd85 100644
@@ -51,24 +51,12 @@ struct div_result {
 
 static inline unsigned long get_tbl(void)
 {
-#if defined(CONFIG_403GCX)
-	unsigned long tbl;
-	asm volatile("mfspr %0, 0x3dd" : "=r" (tbl));
-	return tbl;
-#else
 	return mftbl();
-#endif
 }
 
 static inline unsigned int get_tbu(void)
 {
-#ifdef CONFIG_403GCX
-	unsigned int tbu;
-	asm volatile("mfspr %0, 0x3dc" : "=r" (tbu));
-	return tbu;
-#else
 	return mftbu();
-#endif
 }
 #endif /* !CONFIG_PPC64 */
 
arch/powerpc/kernel/cputable.c +0 -37
index cae9764b929e..61bd8fb408b2 100644
@@ -1232,43 +1232,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 	},
 #endif /* CONFIG_PPC_8xx */
 #ifdef CONFIG_40x
-	{	/* 403GC */
-		.pvr_mask		= 0xffffff00,
-		.pvr_value		= 0x00200200,
-		.cpu_name		= "403GC",
-		.cpu_features		= CPU_FTRS_40X,
-		.cpu_user_features	= PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU,
-		.mmu_features		= MMU_FTR_TYPE_40x,
-		.icache_bsize		= 16,
-		.dcache_bsize		= 16,
-		.machine_check		= machine_check_4xx,
-		.platform		= "ppc403",
-	},
-	{	/* 403GCX */
-		.pvr_mask		= 0xffffff00,
-		.pvr_value		= 0x00201400,
-		.cpu_name		= "403GCX",
-		.cpu_features		= CPU_FTRS_40X,
-		.cpu_user_features	= PPC_FEATURE_32 |
-		 	PPC_FEATURE_HAS_MMU | PPC_FEATURE_NO_TB,
-		.mmu_features		= MMU_FTR_TYPE_40x,
-		.icache_bsize		= 16,
-		.dcache_bsize		= 16,
-		.machine_check		= machine_check_4xx,
-		.platform		= "ppc403",
-	},
-	{	/* 403G ?? */
-		.pvr_mask		= 0xffff0000,
-		.pvr_value		= 0x00200000,
-		.cpu_name		= "403G ??",
-		.cpu_features		= CPU_FTRS_40X,
-		.cpu_user_features	= PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU,
-		.mmu_features		= MMU_FTR_TYPE_40x,
-		.icache_bsize		= 16,
-		.dcache_bsize		= 16,
-		.machine_check		= machine_check_4xx,
-		.platform		= "ppc403",
-	},
 	{	/* 405GP */
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x40110000,
arch/powerpc/kernel/head_40x.S +0 -45

105 lines not on this page · raw message

arch/powerpc/kernel/misc_32.S +0 -9
index d80212be8698..70bb885b14c6 100644
@@ -274,17 +274,8 @@ _GLOBAL(real_writeb)
 #ifndef CONFIG_PPC_8xx
 _GLOBAL(flush_instruction_cache)
 #if defined(CONFIG_4xx)
-#ifdef CONFIG_403GCX
-	li      r3, 512
-	mtctr   r3
-	lis     r4, KERNELBASE@h
-1:	iccci   0, r4
-	addi    r4, r4, 16
-	bdnz    1b
-#else
 	lis	r3, KERNELBASE@h
 	iccci	0,r3
-#endif
 #elif defined(CONFIG_FSL_BOOKE)
 #ifdef CONFIG_E200
 	mfspr   r3,SPRN_L1CSR0
arch/powerpc/kernel/setup-common.c +0 -4
index f9c0d888ce8a..c376a0588039 100644
@@ -306,10 +306,6 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 		}
 	} else {
 		switch (PVR_VER(pvr)) {
-			case 0x0020:	/* 403 family */
-				maj = PVR_MAJ(pvr) + 1;
-				min = PVR_MIN(pvr);
-				break;
 			case 0x1008:	/* 740P/750P ?? */
 				maj = ((pvr >> 8) & 0xFF) - 1;
 				min = pvr & 0xFF;
arch/powerpc/platforms/40x/Kconfig +0 -6
index d06ca51e8443..8669be59948c 100644
@@ -69,12 +69,6 @@ config PPC40x_SIMPLE
 	help
 	  This option enables the simple PowerPC 40x platform support.
 
-# OAK doesn't exist but wanted to keep this around for any future 403GCX boards
-config 403GCX
-	bool
-	#depends on OAK
-	select IBM405_ERR51
-
 config 405GP
 	bool
 	select IBM405_ERR77
Signature · 1 line
2.25.0
#5 lore raw

PATCH v4 5/13 powerpc/40x: Remove STB03xxx

In reply to Christophe Leroy

CONFIG_STB03xxx is not user selectable and is not selected by any config.

Remove it.

---
 arch/powerpc/kernel/cputable.c     | 13 -------------
 arch/powerpc/platforms/40x/Kconfig |  5 -----
 2 files changed, 18 deletions(-)
arch/powerpc/kernel/cputable.c +0 -13
index 61bd8fb408b2..bdc4eab0daaf 100644
@@ -1245,19 +1245,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.machine_check		= machine_check_4xx,
 		.platform		= "ppc405",
 	},
-	{	/* STB 03xxx */
-		.pvr_mask		= 0xffff0000,
-		.pvr_value		= 0x40130000,
-		.cpu_name		= "STB03xxx",
-		.cpu_features		= CPU_FTRS_40X,
-		.cpu_user_features	= PPC_FEATURE_32 |
-			PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
-		.mmu_features		= MMU_FTR_TYPE_40x,
-		.icache_bsize		= 32,
-		.dcache_bsize		= 32,
-		.machine_check		= machine_check_4xx,
-		.platform		= "ppc405",
-	},
 	{	/* STB 04xxx */
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x41810000,
arch/powerpc/platforms/40x/Kconfig +0 -5
index 8669be59948c..ca8f44650647 100644
@@ -86,11 +86,6 @@ config 405EZ
 	select IBM_EMAC_MAL_CLR_ICINTSTAT if IBM_EMAC
 	select IBM_EMAC_MAL_COMMON_ERR if IBM_EMAC
 
-config STB03xxx
-	bool
-	select IBM405_ERR77
-	select IBM405_ERR51
-
 config PPC4xx_GPIO
 	bool "PPC4xx GPIO support"
 	depends on 40x
Signature · 1 line
2.25.0
#6 lore raw

PATCH v4 6/13 powerpc/40x: Remove WALNUT

In reply to Christophe Leroy

CONFIG_WALNUT is not selected by any config and is based on 405GP which is obsolete.

Remove it.

---
v4: Moved a few things related to EP405 to next patch

---
 arch/powerpc/boot/Makefile                  |   4 +-
 arch/powerpc/boot/dts/walnut.dts            | 246 --------------------
 arch/powerpc/boot/treeboot-walnut.c         |  81 -------
 arch/powerpc/configs/40x/acadia_defconfig   |   1 -
 arch/powerpc/configs/40x/kilauea_defconfig  |   1 -
 arch/powerpc/configs/40x/klondike_defconfig |   1 -
 arch/powerpc/configs/40x/makalu_defconfig   |   1 -
 arch/powerpc/configs/40x/obs600_defconfig   |   1 -
 arch/powerpc/platforms/40x/Kconfig          |  10 -
 arch/powerpc/platforms/40x/Makefile         |   1 -
 arch/powerpc/platforms/40x/walnut.c         |  65 ------
 11 files changed, 1 insertion(+), 411 deletions(-)
 delete mode 100644 arch/powerpc/boot/dts/walnut.dts
 delete mode 100644 arch/powerpc/boot/treeboot-walnut.c
 delete mode 100644 arch/powerpc/platforms/40x/walnut.c
arch/powerpc/boot/Makefile +1 -3
index d8077b7071dd..749c27fcf2d9 100644
@@ -75,7 +75,6 @@ $(obj)/cuboot-hotfoot.o: BOOTCFLAGS += -mcpu=405
 $(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405
 $(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405
 $(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405
-$(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
 $(obj)/treeboot-iss4xx.o: BOOTCFLAGS += -mcpu=405
 $(obj)/treeboot-currituck.o: BOOTCFLAGS += -mcpu=405
 $(obj)/treeboot-akebono.o: BOOTCFLAGS += -mcpu=405
@@ -132,7 +131,7 @@ src-wlib-$(CONFIG_CPM) += cpm-serial.c
 
 src-plat-y := of.c epapr.c
 src-plat-$(CONFIG_40x) += fixed-head.S ep405.c cuboot-hotfoot.c \
-				treeboot-walnut.c cuboot-acadia.c \
+				cuboot-acadia.c \
 				cuboot-kilauea.c simpleboot.c
 src-plat-$(CONFIG_44x) += treeboot-ebony.c cuboot-ebony.c treeboot-bamboo.c \
 				cuboot-bamboo.c cuboot-sam440ep.c \
@@ -278,7 +277,6 @@ image-$(CONFIG_EPAPR_BOOT)		+= zImage.epapr
 # Board ports in arch/powerpc/platform/40x/Kconfig
 image-$(CONFIG_EP405)			+= dtbImage.ep405
 image-$(CONFIG_HOTFOOT)			+= cuImage.hotfoot
-image-$(CONFIG_WALNUT)			+= treeImage.walnut
 image-$(CONFIG_ACADIA)			+= cuImage.acadia
 image-$(CONFIG_OBS600)			+= uImage.obs600
 
arch/powerpc/boot/dts/walnut.dts deleted +0 -246

246 lines not on this page · raw message

arch/powerpc/boot/treeboot-walnut.c deleted +0 -81

81 lines not on this page · raw message

arch/powerpc/configs/40x/acadia_defconfig +0 -1
index db93c117be36..25eed86ec528 100644
@@ -9,7 +9,6 @@ CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_ACADIA=y
-# CONFIG_WALNUT is not set
 CONFIG_PCI=y
 CONFIG_NET=y
 CONFIG_PACKET=y
arch/powerpc/configs/40x/kilauea_defconfig +0 -1
index edc22464dfb5..3549c9e950e8 100644
@@ -11,7 +11,6 @@ CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_KILAUEA=y
-# CONFIG_WALNUT is not set
 CONFIG_PCI=y
 CONFIG_NET=y
 CONFIG_PACKET=y
arch/powerpc/configs/40x/klondike_defconfig +0 -1
index 579fa846839c..6a735ee75715 100644
@@ -8,7 +8,6 @@ CONFIG_EMBEDDED=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_WALNUT is not set
 CONFIG_APM8018X=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_MATH_EMULATION=y
arch/powerpc/configs/40x/makalu_defconfig +0 -1
index 188789b9aa4c..4563f88acf0c 100644
@@ -9,7 +9,6 @@ CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_MAKALU=y
-# CONFIG_WALNUT is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
arch/powerpc/configs/40x/obs600_defconfig +0 -1
index 5bf6af7ef093..2a2bb3f46847 100644
@@ -10,7 +10,6 @@ CONFIG_KALLSYMS_ALL=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_WALNUT is not set
 CONFIG_OBS600=y
 CONFIG_MATH_EMULATION=y
 CONFIG_NET=y
arch/powerpc/platforms/40x/Kconfig +0 -10
index ca8f44650647..7c25be6c21d9 100644
@@ -45,16 +45,6 @@ config MAKALU
 	help
 	  This option enables support for the AMCC PPC405EX board.
 
-config WALNUT
-	bool "Walnut"
-	depends on 40x
-	default y
-	select 405GP
-	select FORCE_PCI
-	select OF_RTC
-	help
-	  This option enables support for the IBM PPC405GP evaluation board.
-
 config OBS600
 	bool "OpenBlockS 600"
 	depends on 40x
arch/powerpc/platforms/40x/Makefile +0 -1
index e9386deed505..812f1a5736fb 100644
@@ -1,4 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_WALNUT)				+= walnut.o
 obj-$(CONFIG_EP405)				+= ep405.o
 obj-$(CONFIG_PPC40x_SIMPLE)		+= ppc40x_simple.o
arch/powerpc/platforms/40x/walnut.c deleted +0 -65

65 lines not on this page · raw message

Signature · 1 line
2.25.0
#7 lore raw

PATCH v4 7/13 powerpc/40x: Remove EP405

In reply to Christophe Leroy

EP405 is an old type of board based on a 405GP which is obsolete.

Remove it.

---
v4: A few things from previous patch are now here as there are not related to walnut

---
 arch/powerpc/boot/Makefile               |   3 +-
 arch/powerpc/boot/dts/ep405.dts          | 230 -----------------------
 arch/powerpc/boot/ep405.c                |  71 -------
 arch/powerpc/configs/40x/ep405_defconfig |  62 ------
 arch/powerpc/configs/ppc40x_defconfig    |   1 -
 arch/powerpc/platforms/40x/Kconfig       |   8 -
 arch/powerpc/platforms/40x/Makefile      |   1 -
 arch/powerpc/platforms/40x/ep405.c       | 123 ------------
 8 files changed, 1 insertion(+), 498 deletions(-)
 delete mode 100644 arch/powerpc/boot/dts/ep405.dts
 delete mode 100644 arch/powerpc/boot/ep405.c
 delete mode 100644 arch/powerpc/configs/40x/ep405_defconfig
 delete mode 100644 arch/powerpc/platforms/40x/ep405.c
arch/powerpc/boot/Makefile +1 -2
index 749c27fcf2d9..63d7456b9518 100644
@@ -130,7 +130,7 @@ src-wlib-$(CONFIG_EMBEDDED6xx) += ugecon.c fsl-soc.c
 src-wlib-$(CONFIG_CPM) += cpm-serial.c
 
 src-plat-y := of.c epapr.c
-src-plat-$(CONFIG_40x) += fixed-head.S ep405.c cuboot-hotfoot.c \
+src-plat-$(CONFIG_40x) += fixed-head.S cuboot-hotfoot.c \
 				cuboot-acadia.c \
 				cuboot-kilauea.c simpleboot.c
 src-plat-$(CONFIG_44x) += treeboot-ebony.c cuboot-ebony.c treeboot-bamboo.c \
@@ -275,7 +275,6 @@ image-$(CONFIG_EPAPR_BOOT)		+= zImage.epapr
 #
 
 # Board ports in arch/powerpc/platform/40x/Kconfig
-image-$(CONFIG_EP405)			+= dtbImage.ep405
 image-$(CONFIG_HOTFOOT)			+= cuImage.hotfoot
 image-$(CONFIG_ACADIA)			+= cuImage.acadia
 image-$(CONFIG_OBS600)			+= uImage.obs600
arch/powerpc/boot/dts/ep405.dts deleted +0 -230

230 lines not on this page · raw message

arch/powerpc/boot/ep405.c deleted +0 -71

71 lines not on this page · raw message

arch/powerpc/configs/40x/ep405_defconfig deleted +0 -62

62 lines not on this page · raw message

arch/powerpc/configs/ppc40x_defconfig +0 -1
index 88960a72b525..25f6c91e843a 100644
@@ -10,7 +10,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_PPC4xx_GPIO=y
 CONFIG_ACADIA=y
-CONFIG_EP405=y
 CONFIG_HOTFOOT=y
 CONFIG_KILAUEA=y
 CONFIG_MAKALU=y
arch/powerpc/platforms/40x/Kconfig +0 -8
index 7c25be6c21d9..5d9d96e7223a 100644
@@ -7,14 +7,6 @@ config ACADIA
 	help
 	  This option enables support for the AMCC 405EZ Acadia evaluation board.
 
-config EP405
-	bool "EP405/EP405PC"
-	depends on 40x
-	select 405GP
-	select FORCE_PCI
-	help
-	  This option enables support for the EP405/EP405PC boards.
-
 config HOTFOOT
 	bool "Hotfoot"
 	depends on 40x
arch/powerpc/platforms/40x/Makefile +0 -1
index 812f1a5736fb..122de98527c4 100644
@@ -1,3 +1,2 @@
 # SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_EP405)				+= ep405.o
 obj-$(CONFIG_PPC40x_SIMPLE)		+= ppc40x_simple.o
arch/powerpc/platforms/40x/ep405.c deleted +0 -123

123 lines not on this page · raw message

Signature · 1 line
2.25.0
#8 lore raw

PATCH v4 8/13 powerpc/40x: Remove support for ISS Simulator

In reply to Christophe Leroy

ISS4xx has support for 405GP which is obsolete.

Remote it.

---
 arch/powerpc/platforms/44x/Kconfig | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
arch/powerpc/platforms/44x/Kconfig +1 -2
index 39e93d23fb38..78ac6d67a935 100644
@@ -167,8 +167,7 @@ config YOSEMITE
 
 config ISS4xx
 	bool "ISS 4xx Simulator"
-	depends on (44x || 40x)
-	select 405GP if 40x
+	depends on 44x
 	select 440GP if 44x && !PPC_47x
 	select PPC_FPU
 	select OF_RTC
Signature · 1 line
2.25.0
#9 lore raw

PATCH v4 9/13 powerpc/40x: Remove support for IBM 405GP

In reply to Christophe Leroy

All platforms selecting the obsolete processor are gone now.

Remove support for it.

---
 arch/powerpc/kernel/cputable.c     | 13 -------------
 arch/powerpc/platforms/40x/Kconfig |  6 ------
 2 files changed, 19 deletions(-)
arch/powerpc/kernel/cputable.c +0 -13
index bdc4eab0daaf..8ed553734919 100644
@@ -1232,19 +1232,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 	},
 #endif /* CONFIG_PPC_8xx */
 #ifdef CONFIG_40x
-	{	/* 405GP */
-		.pvr_mask		= 0xffff0000,
-		.pvr_value		= 0x40110000,
-		.cpu_name		= "405GP",
-		.cpu_features		= CPU_FTRS_40X,
-		.cpu_user_features	= PPC_FEATURE_32 |
-			PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
-		.mmu_features		= MMU_FTR_TYPE_40x,
-		.icache_bsize		= 32,
-		.dcache_bsize		= 32,
-		.machine_check		= machine_check_4xx,
-		.platform		= "ppc405",
-	},
 	{	/* STB 04xxx */
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x41810000,
arch/powerpc/platforms/40x/Kconfig +0 -6
index 5d9d96e7223a..253c047fe6fe 100644
@@ -51,12 +51,6 @@ config PPC40x_SIMPLE
 	help
 	  This option enables the simple PowerPC 40x platform support.
 
-config 405GP
-	bool
-	select IBM405_ERR77
-	select IBM405_ERR51
-	select IBM_EMAC_ZMII if IBM_EMAC
-
 config 405EX
 	bool
 	select IBM_EMAC_EMAC4 if IBM_EMAC
Signature · 1 line
2.25.0
#10 lore raw

PATCH v4 10/13 powerpc/40x: Remove IBM405 Erratum #51

In reply to Christophe Leroy

This erratum was for IBM 403GCX, 405EP and STB03xxx which are now gone.

Remove this erratum.

---
 arch/powerpc/kernel/head_40x.S     | 6 ------
 arch/powerpc/platforms/40x/Kconfig | 4 ----
 2 files changed, 10 deletions(-)
arch/powerpc/kernel/head_40x.S +0 -6
index b62b6ab769fc..faeea5b56525 100644
@@ -425,13 +425,7 @@ _ENTRY(saved_ksp_limit)
 	EXCEPTION(0x1400, Trap_14, unknown_exception, EXC_XFER_STD)
 	EXCEPTION(0x1500, Trap_15, unknown_exception, EXC_XFER_STD)
 	EXCEPTION(0x1600, Trap_16, unknown_exception, EXC_XFER_STD)
-#ifdef CONFIG_IBM405_ERR51
-	/* 405GP errata 51 */
-	START_EXCEPTION(0x1700, Trap_17)
-	b DTLBMiss
-#else
 	EXCEPTION(0x1700, Trap_17, unknown_exception, EXC_XFER_STD)
-#endif
 	EXCEPTION(0x1800, Trap_18, unknown_exception, EXC_XFER_STD)
 	EXCEPTION(0x1900, Trap_19, unknown_exception, EXC_XFER_STD)
 	EXCEPTION(0x1A00, Trap_1A, unknown_exception, EXC_XFER_STD)
arch/powerpc/platforms/40x/Kconfig +0 -4
index 253c047fe6fe..ebe283476461 100644
@@ -75,10 +75,6 @@ config PPC4xx_GPIO
 config IBM405_ERR77
 	bool
 
-# All 40x-based cores, up until the 405GPR and 405EP have this errata.
-config IBM405_ERR51
-	bool
-
 config APM8018X
 	bool "APM8018X"
 	depends on 40x
Signature · 1 line
2.25.0
#11 lore raw

PATCH v4 11/13 powerpc: Remove IBM405 Erratum #77

In reply to Christophe Leroy

This erratum is dedicated to IBM 405GP and STB03xxx which are now gone.

Remove this erratum.

---
 arch/powerpc/include/asm/asm-405.h           | 19 -------------------
 arch/powerpc/include/asm/atomic.h            | 11 -----------
 arch/powerpc/include/asm/bitops.h            |  4 ----
 arch/powerpc/include/asm/cmpxchg.h           | 11 -----------
 arch/powerpc/include/asm/futex.h             |  3 ---
 arch/powerpc/include/asm/nohash/32/pgtable.h |  1 -
 arch/powerpc/include/asm/spinlock.h          |  4 ----
 arch/powerpc/kernel/entry_32.S               | 11 -----------
 arch/powerpc/kernel/head_40x.S               |  3 ---
 arch/powerpc/platforms/40x/Kconfig           |  6 ------
 10 files changed, 73 deletions(-)
 delete mode 100644 arch/powerpc/include/asm/asm-405.h
arch/powerpc/include/asm/asm-405.h deleted +0 -19
deleted file mode 100644
index 7270d3ae7c8e..000000000000
@@ -1,19 +0,0 @@
-#ifndef _ASM_POWERPC_ASM_405_H
-#define _ASM_POWERPC_ASM_405_H
-
-#include <asm/asm-const.h>
-
-#ifdef __KERNEL__
-#ifdef CONFIG_IBM405_ERR77
-/* Erratum #77 on the 405 means we need a sync or dcbt before every
- * stwcx.  The old ATOMIC_SYNC_FIX covered some but not all of this.
- */
-#define PPC405_ERR77(ra,rb)	stringify_in_c(dcbt	ra, rb;)
-#define	PPC405_ERR77_SYNC	stringify_in_c(sync;)
-#else
-#define PPC405_ERR77(ra,rb)
-#define PPC405_ERR77_SYNC
-#endif
-#endif
-
-#endif /* _ASM_POWERPC_ASM_405_H */
arch/powerpc/include/asm/atomic.h +0 -11
index 31c231ea56b7..498785ffc25f 100644
@@ -10,7 +10,6 @@
 #include <linux/types.h>
 #include <asm/cmpxchg.h>
 #include <asm/barrier.h>
-#include <asm/asm-405.h>
 
 #define ATOMIC_INIT(i)		{ (i) }
 
@@ -47,7 +46,6 @@ static __inline__ void atomic_##op(int a, atomic_t *v)			\
 	__asm__ __volatile__(						\
 "1:	lwarx	%0,0,%3		# atomic_" #op "\n"			\
 	#asm_op " %0,%2,%0\n"						\
-	PPC405_ERR77(0,%3)						\
 "	stwcx.	%0,0,%3 \n"						\
 "	bne-	1b\n"							\
 	: "=&r" (t), "+m" (v->counter)					\
@@ -63,7 +61,6 @@ static inline int atomic_##op##_return_relaxed(int a, atomic_t *v)	\
 	__asm__ __volatile__(						\
 "1:	lwarx	%0,0,%3		# atomic_" #op "_return_relaxed\n"	\
 	#asm_op " %0,%2,%0\n"						\
-	PPC405_ERR77(0, %3)						\
 "	stwcx.	%0,0,%3\n"						\
 "	bne-	1b\n"							\
 	: "=&r" (t), "+m" (v->counter)					\
@@ -81,7 +78,6 @@ static inline int atomic_fetch_##op##_relaxed(int a, atomic_t *v)	\
 	__asm__ __volatile__(						\
 "1:	lwarx	%0,0,%4		# atomic_fetch_" #op "_relaxed\n"	\
 	#asm_op " %1,%3,%0\n"						\
-	PPC405_ERR77(0, %4)						\
 "	stwcx.	%1,0,%4\n"						\
 "	bne-	1b\n"							\
 	: "=&r" (res), "=&r" (t), "+m" (v->counter)			\
@@ -130,7 +126,6 @@ static __inline__ void atomic_inc(atomic_t *v)
 	__asm__ __volatile__(
 "1:	lwarx	%0,0,%2		# atomic_inc\n\
 	addic	%0,%0,1\n"
-	PPC405_ERR77(0,%2)
 "	stwcx.	%0,0,%2 \n\
 	bne-	1b"
 	: "=&r" (t), "+m" (v->counter)
@@ -146,7 +141,6 @@ static __inline__ int atomic_inc_return_relaxed(atomic_t *v)
 	__asm__ __volatile__(
 "1:	lwarx	%0,0,%2		# atomic_inc_return_relaxed\n"
 "	addic	%0,%0,1\n"
-	PPC405_ERR77(0, %2)
 "	stwcx.	%0,0,%2\n"
 "	bne-	1b"
 	: "=&r" (t), "+m" (v->counter)
@@ -163,7 +157,6 @@ static __inline__ void atomic_dec(atomic_t *v)
 	__asm__ __volatile__(
 "1:	lwarx	%0,0,%2		# atomic_dec\n\
 	addic	%0,%0,-1\n"
-	PPC405_ERR77(0,%2)\
 "	stwcx.	%0,0,%2\n\
 	bne-	1b"
 	: "=&r" (t), "+m" (v->counter)
@@ -179,7 +172,6 @@ static __inline__ int atomic_dec_return_relaxed(atomic_t *v)
 	__asm__ __volatile__(
 "1:	lwarx	%0,0,%2		# atomic_dec_return_relaxed\n"
 "	addic	%0,%0,-1\n"
-	PPC405_ERR77(0, %2)
 "	stwcx.	%0,0,%2\n"
 "	bne-	1b"
 	: "=&r" (t), "+m" (v->counter)
@@ -220,7 +212,6 @@ static __inline__ int atomic_fetch_add_unless(atomic_t *v, int a, int u)
 	cmpw	0,%0,%3 \n\
 	beq	2f \n\
 	add	%0,%2,%0 \n"
-	PPC405_ERR77(0,%2)
 "	stwcx.	%0,0,%1 \n\
 	bne-	1b \n"
 	PPC_ATOMIC_EXIT_BARRIER
@@ -251,7 +242,6 @@ static __inline__ int atomic_inc_not_zero(atomic_t *v)
 	cmpwi	0,%0,0\n\
 	beq-	2f\n\
 	addic	%1,%0,1\n"
-	PPC405_ERR77(0,%2)
 "	stwcx.	%1,0,%2\n\
 	bne-	1b\n"
 	PPC_ATOMIC_EXIT_BARRIER
@@ -280,7 +270,6 @@ static __inline__ int atomic_dec_if_positive(atomic_t *v)
 	cmpwi	%0,1\n\
 	addi	%0,%0,-1\n\
 	blt-	2f\n"
-	PPC405_ERR77(0,%1)
 "	stwcx.	%0,0,%1\n\
 	bne-	1b"
 	PPC_ATOMIC_EXIT_BARRIER
arch/powerpc/include/asm/bitops.h +0 -4
index 28dcf8222943..4a4d3afd5340 100644
@@ -41,7 +41,6 @@
 #include <linux/compiler.h>
 #include <asm/asm-compat.h>
 #include <asm/synch.h>
-#include <asm/asm-405.h>
 
 /* PPC bit number conversion */
 #define PPC_BITLSHIFT(be)	(BITS_PER_LONG - 1 - (be))
@@ -73,7 +72,6 @@ static inline void fn(unsigned long mask,	\
 	prefix					\
 "1:"	PPC_LLARX(%0,0,%3,0) "\n"		\
 	stringify_in_c(op) "%0,%0,%2\n"		\
-	PPC405_ERR77(0,%3)			\
 	PPC_STLCX "%0,0,%3\n"			\
 	"bne- 1b\n"				\
 	: "=&r" (old), "+m" (*p)		\
@@ -119,7 +117,6 @@ static inline unsigned long fn(			\
 	prefix						\
 "1:"	PPC_LLARX(%0,0,%3,eh) "\n"			\
 	stringify_in_c(op) "%1,%0,%2\n"			\
-	PPC405_ERR77(0,%3)				\
 	PPC_STLCX "%1,0,%3\n"				\
 	"bne- 1b\n"					\
 	postfix						\
@@ -175,7 +172,6 @@ clear_bit_unlock_return_word(int nr, volatile unsigned long *addr)
 	PPC_RELEASE_BARRIER
 "1:"	PPC_LLARX(%0,0,%3,0) "\n"
 	"andc %1,%0,%2\n"
-	PPC405_ERR77(0,%3)
 	PPC_STLCX "%1,0,%3\n"
 	"bne- 1b\n"
 	: "=&r" (old), "=&r" (t)
arch/powerpc/include/asm/cmpxchg.h +0 -11
index 27183871eb3b..cf091c4c22e5 100644
@@ -6,7 +6,6 @@
 #include <linux/compiler.h>
 #include <asm/synch.h>
 #include <linux/bug.h>
-#include <asm/asm-405.h>
 
 #ifdef __BIG_ENDIAN
 #define BITOFF_CAL(size, off)	((sizeof(u32) - size - off) * BITS_PER_BYTE)
@@ -29,7 +28,6 @@ static inline u32 __xchg_##type##sfx(volatile void *p, u32 val)	\
 "1:	lwarx   %0,0,%3\n"					\
 "	andc	%1,%0,%5\n"					\
 "	or	%1,%1,%4\n"					\
-	PPC405_ERR77(0,%3)					\
 "	stwcx.	%1,0,%3\n"					\
 "	bne-	1b\n"						\
 	: "=&r" (prev), "=&r" (tmp), "+m" (*(u32*)p)		\
@@ -60,7 +58,6 @@ u32 __cmpxchg_##type##sfx(volatile void *p, u32 old, u32 new)	\
 "	bne-	2f\n"						\
 "	andc	%1,%0,%6\n"					\
 "	or	%1,%1,%5\n"					\
-	PPC405_ERR77(0,%3)					\
 "	stwcx.  %1,0,%3\n"					\
 "	bne-    1b\n"						\
 	br2							\
@@ -92,7 +89,6 @@ __xchg_u32_local(volatile void *p, unsigned long val)
 
 	__asm__ __volatile__(
 "1:	lwarx	%0,0,%2 \n"
-	PPC405_ERR77(0,%2)
 "	stwcx.	%3,0,%2 \n\
 	bne-	1b"
 	: "=&r" (prev), "+m" (*(volatile unsigned int *)p)
@@ -109,7 +105,6 @@ __xchg_u32_relaxed(u32 *p, unsigned long val)
 
 	__asm__ __volatile__(
 "1:	lwarx	%0,0,%2\n"
-	PPC405_ERR77(0, %2)
 "	stwcx.	%3,0,%2\n"
 "	bne-	1b"
 	: "=&r" (prev), "+m" (*p)
@@ -127,7 +122,6 @@ __xchg_u64_local(volatile void *p, unsigned long val)
 
 	__asm__ __volatile__(
 "1:	ldarx	%0,0,%2 \n"
-	PPC405_ERR77(0,%2)
 "	stdcx.	%3,0,%2 \n\
 	bne-	1b"
 	: "=&r" (prev), "+m" (*(volatile unsigned long *)p)
@@ -144,7 +138,6 @@ __xchg_u64_relaxed(u64 *p, unsigned long val)
 
 	__asm__ __volatile__(
 "1:	ldarx	%0,0,%2\n"
-	PPC405_ERR77(0, %2)
 "	stdcx.	%3,0,%2\n"
 "	bne-	1b"
 	: "=&r" (prev), "+m" (*p)
@@ -229,7 +222,6 @@ __cmpxchg_u32(volatile unsigned int *p, unsigned long old, unsigned long new)
 "1:	lwarx	%0,0,%2		# __cmpxchg_u32\n\
 	cmpw	0,%0,%3\n\
 	bne-	2f\n"
-	PPC405_ERR77(0,%2)
 "	stwcx.	%4,0,%2\n\
 	bne-	1b"
 	PPC_ATOMIC_EXIT_BARRIER
@@ -252,7 +244,6 @@ __cmpxchg_u32_local(volatile unsigned int *p, unsigned long old,
 "1:	lwarx	%0,0,%2		# __cmpxchg_u32\n\
 	cmpw	0,%0,%3\n\
 	bne-	2f\n"
-	PPC405_ERR77(0,%2)
 "	stwcx.	%4,0,%2\n\
 	bne-	1b"
 	"\n\
@@ -273,7 +264,6 @@ __cmpxchg_u32_relaxed(u32 *p, unsigned long old, unsigned long new)
 "1:	lwarx	%0,0,%2		# __cmpxchg_u32_relaxed\n"
 "	cmpw	0,%0,%3\n"
 "	bne-	2f\n"
-	PPC405_ERR77(0, %2)
 "	stwcx.	%4,0,%2\n"
 "	bne-	1b\n"
 "2:"
@@ -301,7 +291,6 @@ __cmpxchg_u32_acquire(u32 *p, unsigned long old, unsigned long new)
 "1:	lwarx	%0,0,%2		# __cmpxchg_u32_acquire\n"
 "	cmpw	0,%0,%3\n"
 "	bne-	2f\n"
-	PPC405_ERR77(0, %2)
 "	stwcx.	%4,0,%2\n"
 "	bne-	1b\n"
 	PPC_ACQUIRE_BARRIER
arch/powerpc/include/asm/futex.h +0 -3
index f187bb5e524e..e93ee3202e4c 100644
@@ -8,14 +8,12 @@
 #include <linux/uaccess.h>
 #include <asm/errno.h>
 #include <asm/synch.h>
-#include <asm/asm-405.h>
 
 #define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \
   __asm__ __volatile ( \
 	PPC_ATOMIC_ENTRY_BARRIER \
 "1:	lwarx	%0,0,%2\n" \
 	insn \
-	PPC405_ERR77(0, %2) \
 "2:	stwcx.	%1,0,%2\n" \
 	"bne-	1b\n" \
 	PPC_ATOMIC_EXIT_BARRIER \
@@ -82,7 +80,6 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 "1:     lwarx   %1,0,%3         # futex_atomic_cmpxchg_inatomic\n\
         cmpw    0,%1,%4\n\
         bne-    3f\n"
-        PPC405_ERR77(0,%3)
 "2:     stwcx.  %5,0,%3\n\
         bne-    1b\n"
         PPC_ATOMIC_EXIT_BARRIER
arch/powerpc/include/asm/nohash/32/pgtable.h +0 -1
index fdbfcc44fea8..bbeb7c543274 100644
@@ -9,7 +9,6 @@
 #include <linux/sched.h>
 #include <linux/threads.h>
 #include <asm/mmu.h>			/* For sub-arch specific PPC_PIN_SIZE */
-#include <asm/asm-405.h>
 
 #ifdef CONFIG_44x
 extern int icache_44x_need_flush;
arch/powerpc/include/asm/spinlock.h +0 -4
index 860228e917dc..2d620896cdae 100644
@@ -23,7 +23,6 @@
 #endif
 #include <asm/synch.h>
 #include <asm/ppc-opcode.h>
-#include <asm/asm-405.h>
 
 #ifdef CONFIG_PPC64
 /* use 0x800000yy when locked, where yy == CPU number */
@@ -210,7 +209,6 @@ static inline long __arch_read_trylock(arch_rwlock_t *rw)
 	__DO_SIGN_EXTEND
 "	addic.		%0,%0,1\n\
 	ble-		2f\n"
-	PPC405_ERR77(0,%1)
 "	stwcx.		%0,0,%1\n\
 	bne-		1b\n"
 	PPC_ACQUIRE_BARRIER
@@ -234,7 +232,6 @@ static inline long __arch_write_trylock(arch_rwlock_t *rw)
 "1:	" PPC_LWARX(%0,0,%2,1) "\n\
 	cmpwi		0,%0,0\n\
 	bne-		2f\n"
-	PPC405_ERR77(0,%1)
 "	stwcx.		%1,0,%2\n\
 	bne-		1b\n"
 	PPC_ACQUIRE_BARRIER
@@ -292,7 +289,6 @@ static inline void arch_read_unlock(arch_rwlock_t *rw)
 	PPC_RELEASE_BARRIER
 "1:	lwarx		%0,0,%1\n\
 	addic		%0,%0,-1\n"
-	PPC405_ERR77(0,%1)
 "	stwcx.		%0,0,%1\n\
 	bne-		1b"
 	: "=&r"(tmp)
arch/powerpc/kernel/entry_32.S +0 -11
index 8420abd4ea1c..a7b261440d59 100644
@@ -28,7 +28,6 @@
 #include <asm/unistd.h>
 #include <asm/ptrace.h>
 #include <asm/export.h>
-#include <asm/asm-405.h>
 #include <asm/feature-fixups.h>
 #include <asm/barrier.h>
 #include <asm/kup.h>
@@ -541,9 +540,6 @@ syscall_exit_work:
 	addi	r12,r2,TI_FLAGS
 3:	lwarx	r8,0,r12
 	andc	r8,r8,r11
-#ifdef CONFIG_IBM405_ERR77
-	dcbt	0,r12
-#endif
 	stwcx.	r8,0,r12
 	bne-	3b
 	
@@ -918,9 +914,6 @@ resume_kernel:
 	addi	r5,r2,TI_FLAGS
 0:	lwarx	r8,0,r5
 	andc	r8,r8,r11
-#ifdef CONFIG_IBM405_ERR77
-	dcbt	0,r5
-#endif
 	stwcx.	r8,0,r5
 	bne-	0b
 1:
@@ -997,7 +990,6 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_47x)
 	mtspr	SPRN_XER,r10
 	mtctr	r11
 
-	PPC405_ERR77(0,r1)
 BEGIN_FTR_SECTION
 	lwarx	r11,0,r1
 END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX)
@@ -1066,7 +1058,6 @@ exc_exit_start:
 	lwz	r1,GPR1(r1)
 	.globl exc_exit_restart_end
 exc_exit_restart_end:
-	PPC405_ERR77_SYNC
 	rfi
 	b	.			/* prevent prefetch past rfi */
 
@@ -1109,7 +1100,6 @@ exc_exit_restart_end:
 	lwz	r11,_CTR(r1);						\
 	mtspr	SPRN_XER,r10;						\
 	mtctr	r11;							\
-	PPC405_ERR77(0,r1);						\
 	stwcx.	r0,0,r1;		/* to clear the reservation */	\
 	lwz	r11,_LINK(r1);						\
 	mtlr	r11;							\
@@ -1129,7 +1119,6 @@ exc_exit_restart_end:
 	lwz	r10,GPR10(r1);						\
 	lwz	r11,GPR11(r1);						\
 	lwz	r1,GPR1(r1);						\
-	PPC405_ERR77_SYNC;						\
 	exc_lvl_rfi;							\
 	b	.;		/* prevent prefetch past exc_lvl_rfi */
 
arch/powerpc/kernel/head_40x.S +0 -3
index faeea5b56525..afa93a36437b 100644
@@ -36,7 +36,6 @@
 #include <asm/asm-offsets.h>
 #include <asm/ptrace.h>
 #include <asm/export.h>
-#include <asm/asm-405.h>
 
 #include "head_32.h"
 
@@ -486,7 +485,6 @@ _ENTRY(saved_ksp_limit)
 	lwz	r12,GPR12(r11)
 	lwz	r10,crit_r10@l(0)
 	lwz	r11,crit_r11@l(0)
-	PPC405_ERR77_SYNC
 	rfci
 	b	.
 
@@ -568,7 +566,6 @@ finish_tlb_load:
 	mfspr	r12, SPRN_SPRG_SCRATCH3
 	mfspr	r11, SPRN_SPRG_SCRATCH1
 	mfspr	r10, SPRN_SPRG_SCRATCH0
-	PPC405_ERR77_SYNC
 	rfi			/* Should sync shadow TLBs */
 	b	.		/* prevent prefetch past rfi */
 
arch/powerpc/platforms/40x/Kconfig +0 -6
index ebe283476461..e3e5217c9822 100644
@@ -69,12 +69,6 @@ config PPC4xx_GPIO
 	help
 	  Enable gpiolib support for ppc40x based boards
 
-# 40x errata/workaround config symbols, selected by the CPU models above
-
-# All 405-based cores up until the 405GPR and 405EP have this errata.
-config IBM405_ERR77
-	bool
-
 config APM8018X
 	bool "APM8018X"
 	depends on 40x
Signature · 1 line
2.25.0
#12 lore raw

PATCH v4 12/13 powerpc/40x: Avoid using r12 in TLB miss handlers

In reply to Christophe Leroy

Let's reduce the number of registers used in TLB miss handlers.

We have both r9 and r12 available for any temporary use.

r9 is enough, avoid using r12.

---
 arch/powerpc/kernel/head_40x.S | 70 ++++++++++++++++------------------
 1 file changed, 33 insertions(+), 37 deletions(-)
arch/powerpc/kernel/head_40x.S +33 -37
index afa93a36437b..804cbd0899ac 100644
@@ -254,9 +254,9 @@ _ENTRY(saved_ksp_limit)
 	mtspr	SPRN_SPRG_SCRATCH3, r12
 	mtspr	SPRN_SPRG_SCRATCH4, r9
 	mfcr	r11
-	mfspr	r12, SPRN_PID
+	mfspr	r9, SPRN_PID
 	mtspr	SPRN_SPRG_SCRATCH6, r11
-	mtspr	SPRN_SPRG_SCRATCH5, r12
+	mtspr	SPRN_SPRG_SCRATCH5, r9
 	mfspr	r10, SPRN_DEAR		/* Get faulting address */
 
 	/* If we are faulting a kernel address, we have to use the
@@ -279,12 +279,12 @@ _ENTRY(saved_ksp_limit)
 4:
 	tophys(r11, r11)
 	rlwimi	r11, r10, 12, 20, 29	/* Create L1 (pgdir/pmd) address */
-	lwz	r12, 0(r11)		/* Get L1 entry */
-	andi.	r9, r12, _PMD_PRESENT	/* Check if it points to a PTE page */
+	lwz	r11, 0(r11)		/* Get L1 entry */
+	andi.	r9, r11, _PMD_PRESENT	/* Check if it points to a PTE page */
 	beq	2f			/* Bail if no table */
 
-	rlwimi	r12, r10, 22, 20, 29	/* Compute PTE address */
-	lwz	r11, 0(r12)		/* Get Linux PTE */
+	rlwimi	r11, r10, 22, 20, 29	/* Compute PTE address */
+	lwz	r11, 0(r11)		/* Get Linux PTE */
 #ifdef CONFIG_SWAP
 	li	r9, _PAGE_PRESENT | _PAGE_ACCESSED
 #else
@@ -300,13 +300,13 @@ _ENTRY(saved_ksp_limit)
 	/* Create TLB tag.  This is the faulting address plus a static
 	 * set of bits.  These are size, valid, E, U0.
 	*/
-	li	r12, 0x00c0
-	rlwimi	r10, r12, 0, 20, 31
+	li	r9, 0x00c0
+	rlwimi	r10, r9, 0, 20, 31
 
 	b	finish_tlb_load
 
 2:	/* Check for possible large-page pmd entry */
-	rlwinm.	r9, r12, 2, 22, 24
+	rlwinm.	r9, r11, 2, 22, 24
 	beq	5f
 
 	/* Create TLB tag.  This is the faulting address, plus a static
@@ -314,7 +314,6 @@ _ENTRY(saved_ksp_limit)
 	 */
 	ori	r9, r9, 0x40
 	rlwimi	r10, r9, 0, 20, 31
-	mr	r11, r12
 
 	b	finish_tlb_load
 
@@ -322,9 +321,9 @@ _ENTRY(saved_ksp_limit)
 	/* The bailout.  Restore registers to pre-exception conditions
 	 * and call the heavyweights to help us out.
 	 */
-	mfspr	r12, SPRN_SPRG_SCRATCH5
+	mfspr	r9, SPRN_SPRG_SCRATCH5
 	mfspr	r11, SPRN_SPRG_SCRATCH6
-	mtspr	SPRN_PID, r12
+	mtspr	SPRN_PID, r9
 	mtcr	r11
 	mfspr	r9, SPRN_SPRG_SCRATCH4
 	mfspr	r12, SPRN_SPRG_SCRATCH3
@@ -342,9 +341,9 @@ _ENTRY(saved_ksp_limit)
 	mtspr	SPRN_SPRG_SCRATCH3, r12
 	mtspr	SPRN_SPRG_SCRATCH4, r9
 	mfcr	r11
-	mfspr	r12, SPRN_PID
+	mfspr	r9, SPRN_PID
 	mtspr	SPRN_SPRG_SCRATCH6, r11
-	mtspr	SPRN_SPRG_SCRATCH5, r12
+	mtspr	SPRN_SPRG_SCRATCH5, r9
 	mfspr	r10, SPRN_SRR0		/* Get faulting address */
 
 	/* If we are faulting a kernel address, we have to use the
@@ -367,12 +366,12 @@ _ENTRY(saved_ksp_limit)
 4:
 	tophys(r11, r11)
 	rlwimi	r11, r10, 12, 20, 29	/* Create L1 (pgdir/pmd) address */
-	lwz	r12, 0(r11)		/* Get L1 entry */
-	andi.	r9, r12, _PMD_PRESENT	/* Check if it points to a PTE page */
+	lwz	r11, 0(r11)		/* Get L1 entry */
+	andi.	r9, r11, _PMD_PRESENT	/* Check if it points to a PTE page */
 	beq	2f			/* Bail if no table */
 
-	rlwimi	r12, r10, 22, 20, 29	/* Compute PTE address */
-	lwz	r11, 0(r12)		/* Get Linux PTE */
+	rlwimi	r11, r10, 22, 20, 29	/* Compute PTE address */
+	lwz	r11, 0(r11)		/* Get Linux PTE */
 #ifdef CONFIG_SWAP
 	li	r9, _PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC
 #else
@@ -388,13 +387,13 @@ _ENTRY(saved_ksp_limit)
 	/* Create TLB tag.  This is the faulting address plus a static
 	 * set of bits.  These are size, valid, E, U0.
 	*/
-	li	r12, 0x00c0
-	rlwimi	r10, r12, 0, 20, 31
+	li	r9, 0x00c0
+	rlwimi	r10, r9, 0, 20, 31
 
 	b	finish_tlb_load
 
 2:	/* Check for possible large-page pmd entry */
-	rlwinm.	r9, r12, 2, 22, 24
+	rlwinm.	r9, r11, 2, 22, 24
 	beq	5f
 
 	/* Create TLB tag.  This is the faulting address, plus a static
@@ -402,7 +401,6 @@ _ENTRY(saved_ksp_limit)
 	 */
 	ori	r9, r9, 0x40
 	rlwimi	r10, r9, 0, 20, 31
-	mr	r11, r12
 
 	b	finish_tlb_load
 
@@ -410,9 +408,9 @@ _ENTRY(saved_ksp_limit)
 	/* The bailout.  Restore registers to pre-exception conditions
 	 * and call the heavyweights to help us out.
 	 */
-	mfspr	r12, SPRN_SPRG_SCRATCH5
+	mfspr	r9, SPRN_SPRG_SCRATCH5
 	mfspr	r11, SPRN_SPRG_SCRATCH6
-	mtspr	SPRN_PID, r12
+	mtspr	SPRN_PID, r9
 	mtcr	r11
 	mfspr	r9, SPRN_SPRG_SCRATCH4
 	mfspr	r12, SPRN_SPRG_SCRATCH3
@@ -528,7 +526,7 @@ WDTException:
 	 * miss get to this point to load the TLB.
 	 * 	r10 - TLB_TAG value
 	 * 	r11 - Linux PTE
-	 *	r12, r9 - available to use
+	 *	r9 - available to use
 	 *	PID - loaded with proper value when we get here
 	 *	Upon exit, we reload everything and RFI.
 	 * Actually, it will fit now, but oh well.....a common place
@@ -537,30 +535,28 @@ WDTException:
 tlb_4xx_index:
 	.long	0
 finish_tlb_load:
-	/* load the next available TLB index.
-	*/
-	lwz	r9, tlb_4xx_index@l(0)
-	addi	r9, r9, 1
-	andi.	r9, r9, (PPC40X_TLB_SIZE-1)
-	stw	r9, tlb_4xx_index@l(0)
-
-6:
 	/*
 	 * Clear out the software-only bits in the PTE to generate the
 	 * TLB_DATA value.  These are the bottom 2 bits of the RPM, the
 	 * top 3 bits of the zone field, and M.
 	 */
-	li	r12, 0x0ce2
-	andc	r11, r11, r12
+	li	r9, 0x0ce2
+	andc	r11, r11, r9
+
+	/* load the next available TLB index. */
+	lwz	r9, tlb_4xx_index@l(0)
+	addi	r9, r9, 1
+	andi.	r9, r9, PPC40X_TLB_SIZE - 1
+	stw	r9, tlb_4xx_index@l(0)
 
 	tlbwe	r11, r9, TLB_DATA		/* Load TLB LO */
 	tlbwe	r10, r9, TLB_TAG		/* Load TLB HI */
 
 	/* Done...restore registers and get out of here.
 	*/
-	mfspr	r12, SPRN_SPRG_SCRATCH5
+	mfspr	r9, SPRN_SPRG_SCRATCH5
 	mfspr	r11, SPRN_SPRG_SCRATCH6
-	mtspr	SPRN_PID, r12
+	mtspr	SPRN_PID, r9
 	mtcr	r11
 	mfspr	r9, SPRN_SPRG_SCRATCH4
 	mfspr	r12, SPRN_SPRG_SCRATCH3
Signature · 1 line
2.25.0
#13 lore raw

PATCH v4 13/13 powerpc/40x: Don't save CR in SPRN_SPRG_SCRATCH6

In reply to Christophe Leroy

We have r12 available, use it to keep CR around and don't save it in SPRN_SPRG_SCRATCH6.

---
 arch/powerpc/kernel/head_40x.S | 15 +++++----------
 1 file changed, 5 insertions(+), 10 deletions(-)
arch/powerpc/kernel/head_40x.S +5 -10
index 804cbd0899ac..f9b880235aee 100644
@@ -253,9 +253,8 @@ _ENTRY(saved_ksp_limit)
 	mtspr	SPRN_SPRG_SCRATCH1, r11
 	mtspr	SPRN_SPRG_SCRATCH3, r12
 	mtspr	SPRN_SPRG_SCRATCH4, r9
-	mfcr	r11
+	mfcr	r12
 	mfspr	r9, SPRN_PID
-	mtspr	SPRN_SPRG_SCRATCH6, r11
 	mtspr	SPRN_SPRG_SCRATCH5, r9
 	mfspr	r10, SPRN_DEAR		/* Get faulting address */
 
@@ -322,9 +321,8 @@ _ENTRY(saved_ksp_limit)
 	 * and call the heavyweights to help us out.
 	 */
 	mfspr	r9, SPRN_SPRG_SCRATCH5
-	mfspr	r11, SPRN_SPRG_SCRATCH6
 	mtspr	SPRN_PID, r9
-	mtcr	r11
+	mtcr	r12
 	mfspr	r9, SPRN_SPRG_SCRATCH4
 	mfspr	r12, SPRN_SPRG_SCRATCH3
 	mfspr	r11, SPRN_SPRG_SCRATCH1
@@ -340,9 +338,8 @@ _ENTRY(saved_ksp_limit)
 	mtspr	SPRN_SPRG_SCRATCH1, r11
 	mtspr	SPRN_SPRG_SCRATCH3, r12
 	mtspr	SPRN_SPRG_SCRATCH4, r9
-	mfcr	r11
+	mfcr	r12
 	mfspr	r9, SPRN_PID
-	mtspr	SPRN_SPRG_SCRATCH6, r11
 	mtspr	SPRN_SPRG_SCRATCH5, r9
 	mfspr	r10, SPRN_SRR0		/* Get faulting address */
 
@@ -409,9 +406,8 @@ _ENTRY(saved_ksp_limit)
 	 * and call the heavyweights to help us out.
 	 */
 	mfspr	r9, SPRN_SPRG_SCRATCH5
-	mfspr	r11, SPRN_SPRG_SCRATCH6
 	mtspr	SPRN_PID, r9
-	mtcr	r11
+	mtcr	r12
 	mfspr	r9, SPRN_SPRG_SCRATCH4
 	mfspr	r12, SPRN_SPRG_SCRATCH3
 	mfspr	r11, SPRN_SPRG_SCRATCH1
@@ -555,9 +551,8 @@ finish_tlb_load:
 	/* Done...restore registers and get out of here.
 	*/
 	mfspr	r9, SPRN_SPRG_SCRATCH5
-	mfspr	r11, SPRN_SPRG_SCRATCH6
 	mtspr	SPRN_PID, r9
-	mtcr	r11
+	mtcr	r12
 	mfspr	r9, SPRN_SPRG_SCRATCH4
 	mfspr	r12, SPRN_SPRG_SCRATCH3
 	mfspr	r11, SPRN_SPRG_SCRATCH1
Signature · 1 line
2.25.0