Skip to contentSkip to conversation

Misc ati-vga fixes

PATCH New BALATON Zoltan 1 participant 4 messages Jun 21, 2020

lore
Share & tools
lore
#0 lore raw

cover Misc ati-vga fixes

These are some patches I had lying around in my tree, maybe it's time to merge them.

BALATON Zoltan (3):
ati-vga: Support unaligned access to hardware cursor registers
ati-vga: Do not assert on error
ati-vga: Add dummy MEM_SDRAM_MODE_REG

 hw/display/ati.c      | 92 +++++++++++++++++++++++++++++--------------
 hw/display/ati_dbg.c  |  1 +
 hw/display/ati_regs.h |  1 +
 3 files changed, 65 insertions(+), 29 deletions(-)
Signature · 1 line
2.21.3
#1 lore raw

PATCH 1/3 ati-vga: Support unaligned access to hardware cursor registers

This fixes horizontal mouse movement and pointer color with MacOS that writes these registers with access size less than 4 so previously only the last portion of access was effective overwriting previous partial writes.

---
 hw/display/ati.c | 87 ++++++++++++++++++++++++++++++++----------------
 1 file changed, 58 insertions(+), 29 deletions(-)
hw/display/ati.c +58 -29
index d45127a976..21ae36c535 100644
@@ -389,22 +389,28 @@ static uint64_t ati_mm_read(void *opaque, hwaddr addr, unsigned int size)
     case 0xf00 ... 0xfff:
         val = pci_default_read_config(&s->dev, addr - 0xf00, size);
         break;
-    case CUR_OFFSET:
-        val = s->regs.cur_offset;
-        break;
-    case CUR_HORZ_VERT_POSN:
-        val = s->regs.cur_hv_pos;
-        val |= s->regs.cur_offset & BIT(31);
+    case CUR_OFFSET ... CUR_OFFSET + 3:
+        val = ati_reg_read_offs(s->regs.cur_offset, addr - CUR_OFFSET, size);
+        break;
+    case CUR_HORZ_VERT_POSN ... CUR_HORZ_VERT_POSN + 3:
+        val = ati_reg_read_offs(s->regs.cur_hv_pos,
+                                addr - CUR_HORZ_VERT_POSN, size);
+        if (addr + size > CUR_HORZ_VERT_POSN + 3) {
+            val |= (s->regs.cur_offset & BIT(31)) >> (4 - size);
+        }
         break;
-    case CUR_HORZ_VERT_OFF:
-        val = s->regs.cur_hv_offs;
-        val |= s->regs.cur_offset & BIT(31);
+    case CUR_HORZ_VERT_OFF ... CUR_HORZ_VERT_OFF + 3:
+        val = ati_reg_read_offs(s->regs.cur_hv_offs,
+                                addr - CUR_HORZ_VERT_OFF, size);
+        if (addr + size > CUR_HORZ_VERT_OFF + 3) {
+            val |= (s->regs.cur_offset & BIT(31)) >> (4 - size);
+        }
         break;
-    case CUR_CLR0:
-        val = s->regs.cur_color0;
+    case CUR_CLR0 ... CUR_CLR0 + 3:
+        val = ati_reg_read_offs(s->regs.cur_color0, addr - CUR_CLR0, size);
         break;
-    case CUR_CLR1:
-        val = s->regs.cur_color1;
+    case CUR_CLR1 ... CUR_CLR1 + 3:
+        val = ati_reg_read_offs(s->regs.cur_color1, addr - CUR_CLR1, size);
         break;
     case DST_OFFSET:
         val = s->regs.dst_offset;
@@ -693,48 +699,71 @@ static void ati_mm_write(void *opaque, hwaddr addr,
     case 0xf00 ... 0xfff:
         /* read-only copy of PCI config space so ignore writes */
         break;
-    case CUR_OFFSET:
-        if (s->regs.cur_offset != (data & 0x87fffff0)) {
-            s->regs.cur_offset = data & 0x87fffff0;
+    case CUR_OFFSET ... CUR_OFFSET + 3:
+    {
+        uint32_t t = s->regs.cur_offset;
+
+        ati_reg_write_offs(&t, addr - CUR_OFFSET, data, size);
+        t &= 0x87fffff0;
+        if (s->regs.cur_offset != t) {
+            s->regs.cur_offset = t;
             ati_cursor_define(s);
         }
         break;
-    case CUR_HORZ_VERT_POSN:
-        s->regs.cur_hv_pos = data & 0x3fff0fff;
-        if (data & BIT(31)) {
-            s->regs.cur_offset |= data & BIT(31);
+    }
+    case CUR_HORZ_VERT_POSN ... CUR_HORZ_VERT_POSN + 3:
+    {
+        uint32_t t = s->regs.cur_hv_pos | (s->regs.cur_offset & BIT(31));
+
+        ati_reg_write_offs(&t, addr - CUR_HORZ_VERT_POSN, data, size);
+        s->regs.cur_hv_pos = t & 0x3fff0fff;
+        if (t & BIT(31)) {
+            s->regs.cur_offset |= t & BIT(31);
         } else if (s->regs.cur_offset & BIT(31)) {
             s->regs.cur_offset &= ~BIT(31);
             ati_cursor_define(s);
         }
         if (!s->cursor_guest_mode &&
-            (s->regs.crtc_gen_cntl & CRTC2_CUR_EN) && !(data & BIT(31))) {
+            (s->regs.crtc_gen_cntl & CRTC2_CUR_EN) && !(t & BIT(31))) {
             dpy_mouse_set(s->vga.con, s->regs.cur_hv_pos >> 16,
                           s->regs.cur_hv_pos & 0xffff, 1);
         }
         break;
+    }
     case CUR_HORZ_VERT_OFF:
-        s->regs.cur_hv_offs = data & 0x3f003f;
-        if (data & BIT(31)) {
-            s->regs.cur_offset |= data & BIT(31);
+    {
+        uint32_t t = s->regs.cur_hv_offs | (s->regs.cur_offset & BIT(31));
+
+        ati_reg_write_offs(&t, addr - CUR_HORZ_VERT_OFF, data, size);
+        s->regs.cur_hv_offs = t & 0x3f003f;
+        if (t & BIT(31)) {
+            s->regs.cur_offset |= t & BIT(31);
         } else if (s->regs.cur_offset & BIT(31)) {
             s->regs.cur_offset &= ~BIT(31);
             ati_cursor_define(s);
         }
         break;
-    case CUR_CLR0:
-        if (s->regs.cur_color0 != (data & 0xffffff)) {
-            s->regs.cur_color0 = data & 0xffffff;
+    }
+    case CUR_CLR0 ... CUR_CLR0 + 3:
+    {
+        uint32_t t = s->regs.cur_color0;
+
+        ati_reg_write_offs(&t, addr - CUR_CLR0, data, size);
+        t &= 0xffffff;
+        if (s->regs.cur_color0 != t) {
+            s->regs.cur_color0 = t;
             ati_cursor_define(s);
         }
         break;
-    case CUR_CLR1:
+    }
+    case CUR_CLR1 ... CUR_CLR1 + 3:
         /*
          * Update cursor unconditionally here because some clients set up
          * other registers before actually writing cursor data to memory at
          * offset so we would miss cursor change unless always updating here
          */
-        s->regs.cur_color1 = data & 0xffffff;
+        ati_reg_write_offs(&s->regs.cur_color1, addr - CUR_CLR1, data, size);
+        s->regs.cur_color1 &= 0xffffff;
         ati_cursor_define(s);
         break;
     case DST_OFFSET:
Signature · 1 line
2.21.3
#2 lore raw

PATCH 2/3 ati-vga: Do not assert on error

In reply to BALATON Zoltan

Do not abort on unsupported value just print log and continue. While display will likely be broken this prevents malicious guest to crash QEMU causing denial of service.

---
 hw/display/ati.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
hw/display/ati.c +1 -1
index 21ae36c535..42755cffbb 100644
@@ -86,8 +86,8 @@ static void ati_vga_switch_mode(ATIVGAState *s)
                 break;
             default:
                 qemu_log_mask(LOG_UNIMP, "Unsupported bpp value\n");
+                return;
             }
-            assert(bpp != 0);
             DPRINTF("Switching to %dx%d %d %d @ %x\n", h, v, stride, bpp, offs);
             vbe_ioport_write_index(&s->vga, 0, VBE_DISPI_INDEX_ENABLE);
             vbe_ioport_write_data(&s->vga, 0, VBE_DISPI_DISABLED);
Signature · 1 line
2.21.3
#3 lore raw

PATCH 3/3 ati-vga: Add dummy MEM_SDRAM_MODE_REG

In reply to BALATON Zoltan

Radeon chips have an SDRAM mode reg that is accessed by some drivers. We don't emulate the memory controller but provide some default value to prevent drivers getting unexpected 0.

---
 hw/display/ati.c      | 5 +++++
 hw/display/ati_dbg.c  | 1 +
 hw/display/ati_regs.h | 1 +
 3 files changed, 7 insertions(+)
hw/display/ati.c +5 -0
index 42755cffbb..944f9f420f 100644
@@ -361,6 +361,11 @@ static uint64_t ati_mm_read(void *opaque, hwaddr addr, unsigned int size)
     case MC_STATUS:
         val = 5;
         break;
+    case MEM_SDRAM_MODE_REG:
+        if (s->dev_id != PCI_DEVICE_ID_ATI_RAGE128_PF) {
+            val = BIT(28) | BIT(20);
+        }
+        break;
     case RBBM_STATUS:
     case GUI_STAT:
         val = 64; /* free CMDFIFO entries */
hw/display/ati_dbg.c +1 -0
index 0ebbd36f14..bd0ecd48c7 100644
@@ -42,6 +42,7 @@ static struct ati_regdesc ati_reg_names[] = {
     {"MC_FB_LOCATION", 0x0148},
     {"MC_AGP_LOCATION", 0x014C},
     {"MC_STATUS", 0x0150},
+    {"MEM_SDRAM_MODE_REG", 0x0158},
     {"MEM_POWER_MISC", 0x015c},
     {"AGP_BASE", 0x0170},
     {"AGP_CNTL", 0x0174},
hw/display/ati_regs.h +1 -0
index ebd37ee30d..d6282b2ef2 100644
@@ -60,6 +60,7 @@
 #define MC_FB_LOCATION                          0x0148
 #define MC_AGP_LOCATION                         0x014C
 #define MC_STATUS                               0x0150
+#define MEM_SDRAM_MODE_REG                      0x0158
 #define MEM_POWER_MISC                          0x015c
 #define AGP_BASE                                0x0170
 #define AGP_CNTL                                0x0174
Signature · 1 line
2.21.3