xfrm: support ipip and ipv6 tunnels in vti and xfrmi
Subsystems (5)
v3 cover xfrm: support ipip and ipv6 tunnels in vti and xfrmi
Now ipip and ipv6 tunnels processing is supported by xfrm4/6_tunnel, but not in vti and xfrmi. This feature is needed by processing those uncompressed small fragments and packets when using comp protocol. It means vti and xfrmi won't be able to accept small fragments or packets when using comp protocol, which is not expected.
xfrm4/6_tunnel eventually calls xfrm_input() to process ipip and ipv6 tunnels with an ipip/ipv6-proto state (a child state of comp-proto state), and vti and xfrmi should do the same.
The extra things for vti to do is:
- vti_input() should be called before xfrm_input() to set
XFRM_TUNNEL_SKB_CB(skb)->tunnel.ip4/6 = tunnel. [A]
- vti_rcv_cb() should be called after xfrm_input() to update
the skb->dev. [B]
And the extra things for xfrmi to do is:
- The ipip/ipv6-proto state should be assigned if_id from its parent's state. [C]
- xfrmi_rcv_cb() should be called after xfrm_input() to update
the skb->dev. [D]
Patch 4-7 does the things in [A].
To implement [B] and [D], patch 1-3 is to build a callback function for xfrm4/6_tunnel, which can be called after xfrm_input(), similar to xfrm4/6_protocol's .cb_handler. vti and xfrmi only needs to give their own callback function in patch 4-7 and 9-10, which already
exists: vti_rcv_cb() and xfrmi_rcv_cb().
Patch 8 is to do the thing in [C] by assigning child tunnel's if_id from its parent tunnel.
With the whole patch series, the segments or packets with any size can work with ipsec comp proto on vti and xfrmi.
v1->v2:
- See Patch 2-3.v2->v3:
- See Patch 2-3, 4, 6, 9-10.
Xin Long (10):
xfrm: add is_ipip to struct xfrm_input_afinfo
tunnel4: add cb_handler to struct xfrm_tunnel
tunnel6: add tunnel6_input_afinfo for ipip and ipv6 tunnels
ip_vti: support IPIP tunnel processing with .cb_handler
ip_vti: support IPIP6 tunnel processing
ip6_vti: support IP6IP6 tunnel processing with .cb_handler
ip6_vti: support IP6IP tunnel processing
ipcomp: assign if_id to child tunnel from parent tunnel
xfrm: interface: support IP6IP6 and IP6IP tunnels processing with
.cb_handler
xfrm: interface: support IPIP and IPIP6 tunnels processing with
.cb_handler
include/net/xfrm.h | 5 +++- net/ipv4/ip_vti.c | 67 +++++++++++++++++++++++---------------------- net/ipv4/ipcomp.c | 1 + net/ipv4/tunnel4.c | 43 +++++++++++++++++++++++++++++ net/ipv6/ip6_vti.c | 39 ++++++++++++++++++++++++++ net/ipv6/ipcomp6.c | 1 + net/ipv6/tunnel6.c | 41 +++++++++++++++++++++++++++ net/xfrm/xfrm_input.c | 24 ++++++++-------- net/xfrm/xfrm_interface.c | 70 +++++++++++++++++++++++++++++++++++++++++++++++ 9 files changed, 247 insertions(+), 44 deletions(-)
Signature · 1 line
2.1.0
PATCH v3 1/10 xfrm: add is_ipip to struct xfrm_input_afinfo
This patch is to add a new member is_ipip to struct xfrm_input_afinfo, to allow another group family of callback functions to be registered with is_ipip set.
This will be used for doing a callback for struct xfrm(6)_tunnel of ipip/ipv6 tunnels in xfrm_input() by calling xfrm_rcv_cb(), which is needed by ipip/ipv6 tunnels' support in ip(6)_vti and xfrm interface in the next patches.
--- include/net/xfrm.h | 3 ++- net/xfrm/xfrm_input.c | 24 +++++++++++++----------- 2 files changed, 15 insertions(+), 12 deletions(-)
include/net/xfrm.h +2 -1
@@ -373,7 +373,8 @@ struct xfrm_state_afinfo *xfrm_state_get_afinfo(unsigned int family);struct xfrm_state_afinfo *xfrm_state_afinfo_get_rcu (unsigned int family);struct xfrm_input_afinfo { -unsigned int family; +u8 family; +bool is_ipip;int (*callback)(struct sk_buff *skb,u8 protocol,int err); };
net/xfrm/xfrm_input.c +13 -11
@@ -42,7 +42,7 @@ struct xfrm_trans_cb {#define XFRM_TRANS_SKB_CB (__skb) ((struct xfrm_trans_cb *)&((__skb)->cb[0]))static DEFINE_SPINLOCK (xfrm_input_afinfo_lock); -static struct xfrm_input_afinfo const __rcu *xfrm_input_afinfo[AF_INET6 +1 ]; +static struct xfrm_input_afinfo const __rcu *xfrm_input_afinfo[2 ][AF_INET6 +1 ];static struct gro_cells gro_cells;static struct net_device xfrm_napi_dev;
@@ -53,14 +53,14 @@ int xfrm_input_register_afinfo(const struct xfrm_input_afinfo *afinfo) {int err =0 ; -if (WARN_ON (afinfo->family >=ARRAY_SIZE (xfrm_input_afinfo))) +if (WARN_ON (afinfo->family >AF_INET6 ))return -EAFNOSUPPORT ;spin_lock_bh (&xfrm_input_afinfo_lock); -if (unlikely (xfrm_input_afinfo[afinfo->family] !=NULL )) +if (unlikely (xfrm_input_afinfo[afinfo->is_ipip][afinfo->family])) err = -EEXIST ;else -rcu_assign_pointer (xfrm_input_afinfo[afinfo->family], afinfo); +rcu_assign_pointer (xfrm_input_afinfo[afinfo->is_ipip][afinfo->family], afinfo);spin_unlock_bh (&xfrm_input_afinfo_lock);return err; }
@@ -71,11 +71,11 @@ int xfrm_input_unregister_afinfo(const struct xfrm_input_afinfo *afinfo)int err =0 ;spin_lock_bh (&xfrm_input_afinfo_lock); -if (likely (xfrm_input_afinfo[afinfo->family] !=NULL )) { -if (unlikely (xfrm_input_afinfo[afinfo->family] != afinfo)) +if (likely (xfrm_input_afinfo[afinfo->is_ipip][afinfo->family])) { +if (unlikely (xfrm_input_afinfo[afinfo->is_ipip][afinfo->family] != afinfo)) err = -EINVAL ;else -RCU_INIT_POINTER (xfrm_input_afinfo[afinfo->family],NULL ); +RCU_INIT_POINTER (xfrm_input_afinfo[afinfo->is_ipip][afinfo->family],NULL ); }spin_unlock_bh (&xfrm_input_afinfo_lock);synchronize_rcu ();
@@ -83,15 +83,15 @@ int xfrm_input_unregister_afinfo(const struct xfrm_input_afinfo *afinfo) }EXPORT_SYMBOL (xfrm_input_unregister_afinfo); -static const struct xfrm_input_afinfo *xfrm_input_get_afinfo (unsigned int family) +static const struct xfrm_input_afinfo *xfrm_input_get_afinfo (u8 family,bool is_ipip) {const struct xfrm_input_afinfo *afinfo; -if (WARN_ON_ONCE (family >=ARRAY_SIZE (xfrm_input_afinfo))) +if (WARN_ON_ONCE (family >AF_INET6 ))return NULL ;rcu_read_lock (); - afinfo =rcu_dereference (xfrm_input_afinfo[family]); + afinfo =rcu_dereference (xfrm_input_afinfo[is_ipip][family]);if (unlikely (!afinfo))rcu_read_unlock ();return afinfo;
@@ -100,9 +100,11 @@ static const struct xfrm_input_afinfo *xfrm_input_get_afinfo(unsigned int familystatic int xfrm_rcv_cb (struct sk_buff *skb,unsigned int family,u8 protocol,int err) { +bool is_ipip = (protocol ==IPPROTO_IPIP || protocol ==IPPROTO_IPV6 ); +const struct xfrm_input_afinfo *afinfo;int ret; -const struct xfrm_input_afinfo *afinfo =xfrm_input_get_afinfo (family); + afinfo =xfrm_input_get_afinfo (family, is_ipip);if (!afinfo)return -EAFNOSUPPORT ;
Signature · 1 line
2.1.0
PATCH v3 2/10 tunnel4: add cb_handler to struct xfrm_tunnel
This patch is to register a callback function tunnel4_rcv_cb with is_ipip set in a xfrm_input_afinfo object for tunnel4 and tunnel64.
It will be called by xfrm_rcv_cb() from xfrm_input() when family is AF_INET and proto is IPPROTO_IPIP or IPPROTO_IPV6.
v1->v2:
- Fix a sparse warning caused by the missing "__rcu", as Jakub noticed.
- Handle the err returned by xfrm_input_register_afinfo() in tunnel4_init/fini(), as Sabrina noticed.v2->v3:
- Add "#if IS_ENABLED(CONFIG_INET_XFRM_TUNNEL)" to fix the build error when xfrm is disabled, reported by kbuild test robot.
--- include/net/xfrm.h | 1 + net/ipv4/tunnel4.c | 43 +++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 44 insertions(+)
include/net/xfrm.h +1 -0
@@ -1416,6 +1416,7 @@ struct xfrm6_protocol {/* XFRM tunnel handlers. */ struct xfrm_tunnel {int (*handler)(struct sk_buff *skb); +int (*cb_handler)(struct sk_buff *skb,int err);int (*err_handler)(struct sk_buff *skb,u32 info);struct xfrm_tunnel __rcu *next;
net/ipv4/tunnel4.c +43 -0
61 lines not on this page · raw message
Signature · 1 line
2.1.0
PATCH v3 3/10 tunnel6: add tunnel6_input_afinfo for ipip and ipv6 tunnels
This patch is to register a callback function tunnel6_rcv_cb with is_ipip set in a xfrm_input_afinfo object for tunnel6 and tunnel46.
It will be called by xfrm_rcv_cb() from xfrm_input() when family is AF_INET6 and proto is IPPROTO_IPIP or IPPROTO_IPV6.
v1->v2:
- Fix a sparse warning caused by the missing "__rcu", as Jakub noticed.
- Handle the err returned by xfrm_input_register_afinfo() in tunnel6_init/fini(), as Sabrina noticed.v2->v3:
- Add "#if IS_ENABLED(CONFIG_INET6_XFRM_TUNNEL)" to fix the build error when xfrm is disabled, reported by kbuild test robot
--- include/net/xfrm.h | 1 + net/ipv6/tunnel6.c | 41 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 42 insertions(+)
include/net/xfrm.h +1 -0
@@ -1425,6 +1425,7 @@ struct xfrm_tunnel {struct xfrm6_tunnel {int (*handler)(struct sk_buff *skb); +int (*cb_handler)(struct sk_buff *skb,int err);int (*err_handler)(struct sk_buff *skb,struct inet6_skb_parm *opt,u8 type,u8 code,int offset,__be32 info);struct xfrm6_tunnel __rcu *next;
net/ipv6/tunnel6.c +41 -0
58 lines not on this page · raw message
Signature · 1 line
2.1.0
PATCH v3 4/10 ip_vti: support IPIP tunnel processing with .cb_handler
With tunnel4_input_afinfo added, IPIP tunnel processing in ip_vti can be easily done with .cb_handler. So replace the processing by calling ip_tunnel_rcv() with it.
v1->v2:
- no change.
v2-v3:
- enable it only when CONFIG_INET_XFRM_TUNNEL is defined, to fix the build error, reported by kbuild test robot.
--- net/ipv4/ip_vti.c | 51 +++++++++++++++++++++------------------------------ 1 file changed, 21 insertions(+), 30 deletions(-)
net/ipv4/ip_vti.c +21 -30
@@ -91,32 +91,6 @@ static int vti_rcv_proto(struct sk_buff *skb)return vti_rcv (skb,0 , false); } -static int vti_rcv_tunnel (struct sk_buff *skb) -{ -struct ip_tunnel_net *itn =net_generic (dev_net (skb->dev), vti_net_id); -const struct iphdr *iph =ip_hdr (skb); -struct ip_tunnel *tunnel; - - tunnel =ip_tunnel_lookup (itn, skb->dev->ifindex,TUNNEL_NO_KEY , - iph->saddr, iph->daddr,0 ); -if (tunnel) { -struct tnl_ptk_info tpi = { - .proto =htons (ETH_P_IP ), - }; - -if (!xfrm4_policy_check (NULL ,XFRM_POLICY_IN , skb)) - goto drop; -if (iptunnel_pull_header (skb,0 , tpi.proto, false)) - goto drop; -return ip_tunnel_rcv (tunnel, skb, &tpi,NULL , false); - } - -return -EINVAL ; -drop: -kfree_skb (skb); -return 0 ; -} -static int vti_rcv_cb (struct sk_buff *skb,int err) {unsigned short family;
@@ -495,11 +469,22 @@ static struct xfrm4_protocol vti_ipcomp4_protocol __read_mostly = { .priority = 100, }; -static struct xfrm_tunnel ipip_handler__read_mostly = { +#if IS_ENABLED (CONFIG_INET_XFRM_TUNNEL ) +static int vti_rcv_tunnel (struct sk_buff *skb) +{ +XFRM_SPI_SKB_CB (skb)->family =AF_INET ; +XFRM_SPI_SKB_CB (skb)->daddroff = offsetof(struct iphdr , daddr); + +return vti_input (skb,IPPROTO_IPIP ,ip_hdr (skb)->saddr,0 , false); +} + +static struct xfrm_tunnel vti_ipip_handler__read_mostly = { .handler = vti_rcv_tunnel, + .cb_handler = vti_rcv_cb, .err_handler = vti4_err, .priority =0 , }; +#endif static int __net_init vti_init_net (struct net *net) {
@@ -669,10 +654,12 @@ static int __init vti_init(void)if (err <0 ) goto xfrm_proto_comp_failed; +#if IS_ENABLED (CONFIG_INET_XFRM_TUNNEL ) msg ="ipip tunnel" ; - err =xfrm4_tunnel_register (&ipip_handler,AF_INET ); + err =xfrm4_tunnel_register (&vti_ipip_handler,AF_INET );if (err <0 ) goto xfrm_tunnel_failed; +#endif msg ="netlink interface" ; err =rtnl_link_register (&vti_link_ops);
@@ -682,8 +669,10 @@ static int __init vti_init(void)return err; rtnl_link_failed: -xfrm4_tunnel_deregister (&ipip_handler,AF_INET ); +#if IS_ENABLED (CONFIG_INET_XFRM_TUNNEL ) +xfrm4_tunnel_deregister (&vti_ipip_handler,AF_INET ); xfrm_tunnel_failed: +#endif xfrm4_protocol_deregister (&vti_ipcomp4_protocol,IPPROTO_COMP ); xfrm_proto_comp_failed:xfrm4_protocol_deregister (&vti_ah4_protocol,IPPROTO_AH );
@@ -699,7 +688,9 @@ static int __init vti_init(void) static void __exit vti_fini(void) {rtnl_link_unregister (&vti_link_ops); -xfrm4_tunnel_deregister (&ipip_handler,AF_INET ); +#if IS_ENABLED (CONFIG_INET_XFRM_TUNNEL ) +xfrm4_tunnel_deregister (&vti_ipip_handler,AF_INET ); +#endif xfrm4_protocol_deregister (&vti_ipcomp4_protocol,IPPROTO_COMP );xfrm4_protocol_deregister (&vti_ah4_protocol,IPPROTO_AH );xfrm4_protocol_deregister (&vti_esp4_protocol,IPPROTO_ESP );
Signature · 1 line
2.1.0
PATCH v3 5/10 ip_vti: support IPIP6 tunnel processing
For IPIP6 tunnel processing, the functions called will be the same as that for IPIP tunnel's. So reuse it and register it with family == AF_INET6.
--- net/ipv4/ip_vti.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-)
net/ipv4/ip_vti.c +14 -2
@@ -658,7 +658,12 @@ static int __init vti_init(void) msg ="ipip tunnel" ; err =xfrm4_tunnel_register (&vti_ipip_handler,AF_INET );if (err <0 ) - goto xfrm_tunnel_failed; + goto xfrm_tunnel_ipip_failed; +#if IS_ENABLED (CONFIG_IPV6 ) + err =xfrm4_tunnel_register (&vti_ipip_handler,AF_INET6 ); +if (err <0 ) + goto xfrm_tunnel_ipip6_failed; +#endif #endif msg ="netlink interface" ;
@@ -670,8 +675,12 @@ static int __init vti_init(void) rtnl_link_failed: #if IS_ENABLED(CONFIG_INET_XFRM_TUNNEL) +#if IS_ENABLED(CONFIG_IPV6) + xfrm4_tunnel_deregister(&vti_ipip_handler, AF_INET6); +xfrm_tunnel_ipip6_failed: +#endif xfrm4_tunnel_deregister(&vti_ipip_handler, AF_INET); -xfrm_tunnel_failed: +xfrm_tunnel_ipip_failed: #endif xfrm4_protocol_deregister(&vti_ipcomp4_protocol, IPPROTO_COMP); xfrm_proto_comp_failed:
@@ -689,6 +698,9 @@ static void __exit vti_fini(void) {rtnl_link_unregister (&vti_link_ops);#if IS_ENABLED (CONFIG_INET_XFRM_TUNNEL ) +#if IS_ENABLED (CONFIG_IPV6 ) +xfrm4_tunnel_deregister (&vti_ipip_handler,AF_INET6 ); +#endif xfrm4_tunnel_deregister (&vti_ipip_handler,AF_INET );#endif xfrm4_protocol_deregister (&vti_ipcomp4_protocol,IPPROTO_COMP );
Signature · 1 line
2.1.0
PATCH v3 6/10 ip6_vti: support IP6IP6 tunnel processing with .cb_handler
Similar to IPIP tunnel's processing, this patch is to support IP6IP6 tunnel processing with .cb_handler.
v1->v2:
- no change.
v2-v3:
- enable it only when CONFIG_INET6_XFRM_TUNNEL is defined, to fix the build error, reported by kbuild test robot.
--- net/ipv6/ip6_vti.c | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+)
net/ipv6/ip6_vti.c +33 -0
@@ -1218,6 +1218,26 @@ static struct xfrm6_protocol vti_ipcomp6_protocol __read_mostly = { .priority = 100, }; +#if IS_ENABLED (CONFIG_INET6_XFRM_TUNNEL ) +static int vti6_rcv_tunnel (struct sk_buff *skb) +{ +const xfrm_address_t *saddr; +__be32 spi; + + saddr = (const xfrm_address_t *)&ipv6_hdr (skb)->saddr; + spi =xfrm6_tunnel_spi_lookup (dev_net (skb->dev), saddr); + +return vti6_input_proto (skb,IPPROTO_IPV6 , spi,0 ); +} + +static struct xfrm6_tunnel vti_ipv6_handler__read_mostly = { + .handler = vti6_rcv_tunnel, + .cb_handler = vti6_rcv_cb, + .err_handler = vti6_err, + .priority =0 , +}; +#endif +/** * vti6_tunnel_init - register protocol and reserve needed resources *
@@ -1243,6 +1263,12 @@ static int __init vti6_tunnel_init(void) err =xfrm6_protocol_register (&vti_ipcomp6_protocol,IPPROTO_COMP );if (err <0 ) goto xfrm_proto_comp_failed; +#if IS_ENABLED (CONFIG_INET6_XFRM_TUNNEL ) + msg ="ipv6 tunnel" ; + err =xfrm6_tunnel_register (&vti_ipv6_handler,AF_INET6 ); +if (err <0 ) + goto vti_tunnel_failed; +#endif msg ="netlink interface" ; err =rtnl_link_register (&vti6_link_ops);
@@ -1252,6 +1278,10 @@ static int __init vti6_tunnel_init(void)return 0 ; rtnl_link_failed: +#if IS_ENABLED(CONFIG_INET6_XFRM_TUNNEL) + err =xfrm6_tunnel_deregister (&vti_ipv6_handler,AF_INET6 ); +vti_tunnel_failed: +#endifxfrm6_protocol_deregister (&vti_ipcomp6_protocol,IPPROTO_COMP ); xfrm_proto_comp_failed:xfrm6_protocol_deregister (&vti_ah6_protocol,IPPROTO_AH );
@@ -1270,6 +1300,9 @@ static int __init vti6_tunnel_init(void) static void __exit vti6_tunnel_cleanup(void) {rtnl_link_unregister (&vti6_link_ops); +#if IS_ENABLED (CONFIG_INET6_XFRM_TUNNEL ) +xfrm6_tunnel_deregister (&vti_ipv6_handler,AF_INET6 ); +#endif xfrm6_protocol_deregister (&vti_ipcomp6_protocol,IPPROTO_COMP );xfrm6_protocol_deregister (&vti_ah6_protocol,IPPROTO_AH );xfrm6_protocol_deregister (&vti_esp6_protocol,IPPROTO_ESP );
Signature · 1 line
2.1.0
PATCH v3 7/10 ip6_vti: support IP6IP tunnel processing
For IP6IP tunnel processing, the functions called will be the same as that for IP6IP6 tunnel's. So reuse it and register it with family == AF_INET.
--- net/ipv6/ip6_vti.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
net/ipv6/ip6_vti.c +8 -2
@@ -1267,7 +1267,10 @@ static int __init vti6_tunnel_init(void) msg ="ipv6 tunnel" ; err =xfrm6_tunnel_register (&vti_ipv6_handler,AF_INET6 );if (err <0 ) - goto vti_tunnel_failed; + goto vti_tunnel_ipv6_failed; + err =xfrm6_tunnel_register (&vti_ipv6_handler,AF_INET ); +if (err <0 ) + goto vti_tunnel_ip6ip_failed;#endif msg ="netlink interface" ;
@@ -1279,8 +1282,10 @@ static int __init vti6_tunnel_init(void) rtnl_link_failed: #if IS_ENABLED(CONFIG_INET6_XFRM_TUNNEL) + err =xfrm6_tunnel_deregister (&vti_ipv6_handler,AF_INET ); +vti_tunnel_ip6ip_failed: err =xfrm6_tunnel_deregister (&vti_ipv6_handler,AF_INET6 ); -vti_tunnel_failed: +vti_tunnel_ipv6_failed: #endifxfrm6_protocol_deregister (&vti_ipcomp6_protocol,IPPROTO_COMP ); xfrm_proto_comp_failed:
@@ -1301,6 +1306,7 @@ static void __exit vti6_tunnel_cleanup(void) {rtnl_link_unregister (&vti6_link_ops);#if IS_ENABLED (CONFIG_INET6_XFRM_TUNNEL ) +xfrm6_tunnel_deregister (&vti_ipv6_handler,AF_INET );xfrm6_tunnel_deregister (&vti_ipv6_handler,AF_INET6 );#endif xfrm6_protocol_deregister (&vti_ipcomp6_protocol,IPPROTO_COMP );
Signature · 1 line
2.1.0
PATCH v3 8/10 ipcomp: assign if_id to child tunnel from parent tunnel
The child tunnel if_id will be used for xfrm interface's lookup when processing the IP(6)IP(6) packets in the next patches.
--- net/ipv4/ipcomp.c | 1 + net/ipv6/ipcomp6.c | 1 + 2 files changed, 2 insertions(+)
net/ipv4/ipcomp.c +1 -0
@@ -72,6 +72,7 @@ static struct xfrm_state *ipcomp_tunnel_create(struct xfrm_state *x) t->props.flags = x->props.flags; t->props.extra_flags = x->props.extra_flags;memcpy (&t->mark, &x->mark,sizeof (t->mark)); + t->if_id = x->if_id;if (xfrm_init_state (t)) goto error;
net/ipv6/ipcomp6.c +1 -0
@@ -91,6 +91,7 @@ static struct xfrm_state *ipcomp6_tunnel_create(struct xfrm_state *x) t->props.mode = x->props.mode;memcpy (t->props.saddr.a6, x->props.saddr.a6,sizeof (struct in6_addr ));memcpy (&t->mark, &x->mark,sizeof (t->mark)); + t->if_id = x->if_id;if (xfrm_init_state (t)) goto error;
Signature · 1 line
2.1.0
PATCH v3 9/10 xfrm: interface: support IP6IP6 and IP6IP tunnels processing with .cb_handler
Similar to ip6_vti, IP6IP6 and IP6IP tunnels processing can easily be done with .cb_handler for xfrm interface.
v1->v2:
- no change.
v2-v3:
- enable it only when CONFIG_INET6_XFRM_TUNNEL is defined, to fix the build error, reported by kbuild test robot.
--- net/xfrm/xfrm_interface.c | 38 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+)
net/xfrm/xfrm_interface.c +38 -0
@@ -798,6 +798,26 @@ static struct xfrm6_protocol xfrmi_ipcomp6_protocol __read_mostly = { .priority = 10, }; +#if IS_ENABLED (CONFIG_INET6_XFRM_TUNNEL ) +static int xfrmi6_rcv_tunnel (struct sk_buff *skb) +{ +const xfrm_address_t *saddr; +__be32 spi; + + saddr = (const xfrm_address_t *)&ipv6_hdr (skb)->saddr; + spi =xfrm6_tunnel_spi_lookup (dev_net (skb->dev), saddr); + +return xfrm6_rcv_spi (skb,IPPROTO_IPV6 , spi,NULL ); +} + +static struct xfrm6_tunnel xfrmi_ipv6_handler__read_mostly = { + .handler = xfrmi6_rcv_tunnel, + .cb_handler = xfrmi_rcv_cb, + .err_handler = xfrmi6_err, + .priority =-1 , +}; +#endif +static struct xfrm4_protocol xfrmi_esp4_protocol__read_mostly = { .handler = xfrm4_rcv, .input_handler = xfrm_input,
@@ -866,9 +886,23 @@ static int __init xfrmi6_init(void) err =xfrm6_protocol_register (&xfrmi_ipcomp6_protocol,IPPROTO_COMP );if (err <0 ) goto xfrm_proto_comp_failed; +#if IS_ENABLED (CONFIG_INET6_XFRM_TUNNEL ) + err =xfrm6_tunnel_register (&xfrmi_ipv6_handler,AF_INET6 ); +if (err <0 ) + goto xfrm_tunnel_ipv6_failed; + err =xfrm6_tunnel_register (&xfrmi_ipv6_handler,AF_INET ); +if (err <0 ) + goto xfrm_tunnel_ip6ip_failed; +#endif return 0 ; +#if IS_ENABLED (CONFIG_INET6_XFRM_TUNNEL ) +xfrm_tunnel_ip6ip_failed: +xfrm6_tunnel_deregister (&xfrmi_ipv6_handler,AF_INET6 ); +xfrm_tunnel_ipv6_failed: +xfrm6_protocol_deregister (&xfrmi_ipcomp6_protocol,IPPROTO_COMP ); +#endif xfrm_proto_comp_failed:xfrm6_protocol_deregister (&xfrmi_ah6_protocol,IPPROTO_AH ); xfrm_proto_ah_failed:
@@ -879,6 +913,10 @@ static int __init xfrmi6_init(void)static void xfrmi6_fini (void ) { +#if IS_ENABLED (CONFIG_INET6_XFRM_TUNNEL ) +xfrm6_tunnel_deregister (&xfrmi_ipv6_handler,AF_INET ); +xfrm6_tunnel_deregister (&xfrmi_ipv6_handler,AF_INET6 ); +#endif xfrm6_protocol_deregister (&xfrmi_ipcomp6_protocol,IPPROTO_COMP );xfrm6_protocol_deregister (&xfrmi_ah6_protocol,IPPROTO_AH );xfrm6_protocol_deregister (&xfrmi_esp6_protocol,IPPROTO_ESP );
Signature · 1 line
2.1.0
PATCH v3 10/10 xfrm: interface: support IPIP and IPIP6 tunnels processing with .cb_handler
Similar to ip_vti, IPIP and IPIP6 tunnels processing can easily be done with .cb_handler for xfrm interface.
v1->v2:
- no change.
v2-v3:
- enable it only when CONFIG_INET_XFRM_TUNNEL is defined, to fix the build error, reported by kbuild test robot.
--- net/xfrm/xfrm_interface.c | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+)
net/xfrm/xfrm_interface.c +32 -0
@@ -842,6 +842,20 @@ static struct xfrm4_protocol xfrmi_ipcomp4_protocol __read_mostly = { .priority = 10, }; +#if IS_ENABLED (CONFIG_INET_XFRM_TUNNEL ) +static int xfrmi4_rcv_tunnel (struct sk_buff *skb) +{ +return xfrm4_rcv_spi (skb,IPPROTO_IPIP ,ip_hdr (skb)->saddr); +} + +static struct xfrm_tunnel xfrmi_ipip_handler__read_mostly = { + .handler = xfrmi4_rcv_tunnel, + .cb_handler = xfrmi_rcv_cb, + .err_handler = xfrmi4_err, + .priority =-1 , +}; +#endif +static int __init xfrmi4_init (void ) {int err;
@@ -855,9 +869,23 @@ static int __init xfrmi4_init(void) err =xfrm4_protocol_register (&xfrmi_ipcomp4_protocol,IPPROTO_COMP );if (err <0 ) goto xfrm_proto_comp_failed; +#if IS_ENABLED (CONFIG_INET_XFRM_TUNNEL ) + err =xfrm4_tunnel_register (&xfrmi_ipip_handler,AF_INET ); +if (err <0 ) + goto xfrm_tunnel_ipip_failed; + err =xfrm4_tunnel_register (&xfrmi_ipip_handler,AF_INET6 ); +if (err <0 ) + goto xfrm_tunnel_ipip6_failed; +#endif return 0 ; +#if IS_ENABLED (CONFIG_INET_XFRM_TUNNEL ) +xfrm_tunnel_ipip6_failed: +xfrm4_tunnel_deregister (&xfrmi_ipip_handler,AF_INET ); +xfrm_tunnel_ipip_failed: +xfrm4_protocol_deregister (&xfrmi_ipcomp4_protocol,IPPROTO_COMP ); +#endif xfrm_proto_comp_failed:xfrm4_protocol_deregister (&xfrmi_ah4_protocol,IPPROTO_AH ); xfrm_proto_ah_failed:
@@ -868,6 +896,10 @@ static int __init xfrmi4_init(void)static void xfrmi4_fini (void ) { +#if IS_ENABLED (CONFIG_INET_XFRM_TUNNEL ) +xfrm4_tunnel_deregister (&xfrmi_ipip_handler,AF_INET6 ); +xfrm4_tunnel_deregister (&xfrmi_ipip_handler,AF_INET ); +#endif xfrm4_protocol_deregister (&xfrmi_ipcomp4_protocol,IPPROTO_COMP );xfrm4_protocol_deregister (&xfrmi_ah4_protocol,IPPROTO_AH );xfrm4_protocol_deregister (&xfrmi_esp4_protocol,IPPROTO_ESP );
Signature · 1 line
2.1.0
Re: [PATCHv3 ipsec-next 06/10] ip6_vti: support IP6IP6 tunnel processing with .cb_handler
In reply to Xin LongQuoted 21 lines · Xin Long
Similar to IPIP tunnel's processing, this patch is to support IP6IP6 tunnel processing with .cb_handler.
v1->v2:
- no change.
v2-v3:
- enable it only whenCONFIG_INET6_XFRM_TUNNELis defined, to fix the build error, reported by kbuild test robot.Signed-off-by Xin Long <[email protected]>--- net/ipv6/ip6_vti.c | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+)net/ipv6/ip6_vti.c +0
-0@@ -1218,6 +1218,26 @@ static struct xfrm6_protocol vti_ipcomp6_protocol __read_mostly = { .priority = 100,
net/ipv6/ip6_vti.c static struct xfrm6_protocol vti_ipcomp6_protocol __read_mostly = { · line 1228
Quoted 10 lines
net/ipv6/ip6_vti.c +8
-0}; +#if IS_ENABLED (CONFIG_INET6_XFRM_TUNNEL ) +static int vti6_rcv_tunnel (struct sk_buff *skb) +{ +const xfrm_address_t *saddr; +__be32 spi; + + saddr = (const xfrm_address_t *)&ipv6_hdr (skb)->saddr; + spi =xfrm6_tunnel_spi_lookup (dev_net (skb->dev), saddr);
arm build failed due this error on linux-next 20200713 and 20200713 15:51:27 | net/ipv6/ip6_vti.o: In function `vti6_rcv_tunnel':
15:51:27 | ip6_vti.c:(.text+0x1d20): undefined reference to `xfrm6_tunnel_spi_lookup'
config link,
http://snapshots.linaro.org/openembedded/lkft/lkft/sumo/am57xx-evm/lkft/linux-next/811/config
Signature · 2 lines
Linaro LKFT https://lkft.linaro.org
Re: [PATCHv3 ipsec-next 06/10] ip6_vti: support IP6IP6 tunnel processing with .cb_handler
Thanks
I'll check it soon.
Quoted 48 lines · Naresh Kamboju
Quoted 21 lines · Xin Long
Similar to IPIP tunnel's processing, this patch is to support IP6IP6 tunnel processing with .cb_handler.
v1->v2:
- no change.
v2-v3:
- enable it only whenCONFIG_INET6_XFRM_TUNNELis defined, to fix the build error, reported by kbuild test robot.Signed-off-by Xin Long <[email protected]>--- net/ipv6/ip6_vti.c | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+)net/ipv6/ip6_vti.c +0
-0@@ -1218,6 +1218,26 @@ static struct xfrm6_protocol vti_ipcomp6_protocol __read_mostly = { .priority = 100,net/ipv6/ip6_vti.c static struct xfrm6_protocol vti_ipcomp6_protocol __read_mostly = { · line 1228
Quoted 10 lines
net/ipv6/ip6_vti.c +8
-0}; +#if IS_ENABLED (CONFIG_INET6_XFRM_TUNNEL ) +static int vti6_rcv_tunnel (struct sk_buff *skb) +{ +const xfrm_address_t *saddr; +__be32 spi; + + saddr = (const xfrm_address_t *)&ipv6_hdr (skb)->saddr; + spi =xfrm6_tunnel_spi_lookup (dev_net (skb->dev), saddr);arm build failed due this error on linux-next 20200713 and 20200713 15:51:27 |
net/ipv6/ip6_vti.o: In function `vti6_rcv_tunnel':
15:51:27 | ip6_vti.c:(.text+0x1d20): undefined reference to `xfrm6_tunnel_spi_lookup'config link,
http://snapshots.linaro.org/openembedded/lkft/lkft/sumo/am57xx-evm/lkft/linux-next/811/config--
Linaro LKFT
https://lkft.linaro.org
Re: [PATCHv3 ipsec-next 06/10] ip6_vti: support IP6IP6 tunnel processing with .cb_handler
Quoted 33 lines · Xin Long
Thanks
I'll check it soon.
Quoted 25 lines · Naresh Kamboju
Quoted 23 lines · Xin Long
Similar to IPIP tunnel's processing, this patch is to support IP6IP6 tunnel processing with .cb_handler.
v1->v2:
- no change.
v2-v3:
- enable it only whenCONFIG_INET6_XFRM_TUNNELis defined, to fix the build error, reported by kbuild test robot.Signed-off-by Xin Long <[email protected]>--- net/ipv6/ip6_vti.c | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+)net/ipv6/ip6_vti.c +0
-0@@ -1218,6 +1218,26 @@ static struct xfrm6_protocol vti_ipcomp6_protocol __read_mostly = { .priority = 100, };
Quoted 1 line
Quoted 1 line
net/ipv6/ip6_vti.c static struct xfrm6_protocol vti_ipcomp6_protocol __read_mostly = { · line 1221
Quoted 1 line
net/ipv6/ip6_vti.c +1
-0+#if IS_ENABLED (CONFIG_INET6_XFRM_TUNNEL )
This can be fixed by using IS_REACHABLE()
Quoted 22 lines
Quoted 22 lines
net/ipv6/ip6_vti.c static struct xfrm6_protocol vti_ipcomp6_protocol __read_mostly = { · line 1228
Quoted 7 lines
net/ipv6/ip6_vti.c +7
-0+static int vti6_rcv_tunnel (struct sk_buff *skb) +{ +const xfrm_address_t *saddr; +__be32 spi; + + saddr = (const xfrm_address_t *)&ipv6_hdr (skb)->saddr; + spi =xfrm6_tunnel_spi_lookup (dev_net (skb->dev), saddr);arm build failed due this error on linux-next 20200713 and 20200713 15:51:27 |
net/ipv6/ip6_vti.o: In function `vti6_rcv_tunnel':
15:51:27 | ip6_vti.c:(.text+0x1d20): undefined reference to `xfrm6_tunnel_spi_lookup'config link,
http://snapshots.linaro.org/openembedded/lkft/lkft/sumo/am57xx-evm/lkft/linux-next/811/config--
Linaro LKFT
https://lkft.linaro.org
Steffen Klassert
maintainerQuoted 38 lines · Xin Long
Now ipip and ipv6 tunnels processing is supported by xfrm4/6_tunnel, but not in vti and xfrmi. This feature is needed by processing those uncompressed small fragments and packets when using comp protocol. It means vti and xfrmi won't be able to accept small fragments or packets when using comp protocol, which is not expected.
xfrm4/6_tunnel eventually calls
xfrm_input()to process ipip and ipv6 tunnels with an ipip/ipv6-proto state (a child state of comp-proto state), and vti and xfrmi should do the same.The extra things for vti to do is:
-
vti_input()should be called beforexfrm_input()to setXFRM_TUNNEL_SKB_CB(skb)->tunnel.ip4/6 = tunnel. [A]-
vti_rcv_cb()should be called afterxfrm_input()to updatethe skb->dev. [B]And the extra things for xfrmi to do is:
- The ipip/ipv6-proto state should be assigned
if_idfrom its parent's state. [C]-
xfrmi_rcv_cb()should be called afterxfrm_input()to updatethe skb->dev. [D]Patch 4-7 does the things in [A].
To implement [B] and [D], patch 1-3 is to build a callback function for xfrm4/6_tunnel, which can be called after
xfrm_input(), similar to xfrm4/6_protocol's .cb_handler. vti and xfrmi only needs to give their own callback function in patch 4-7 and 9-10, which already
exists:vti_rcv_cb()andxfrmi_rcv_cb().Patch 8 is to do the thing in [C] by assigning child tunnel's
if_idfrom its parent tunnel.
Quoted 7 lines
With the whole patch series, the segments or packets with any size can work with ipsec comp proto on vti and xfrmi.
v1->v2:
- See Patch 2-3.v2->v3:
- See Patch 2-3, 4, 6, 9-10.
Series applied, thanks a lot Xin!