drm/panel: Add panel driver for the Mantix MLAF057WE51-X DSI panel

Add prefix for Mantix Display Technology Co.,Ltd.

Signed-off-by Guido Günther <[email protected]>

---
 Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
 1 file changed, 2 insertions(+)

Documentation/devicetree/bindings/vendor-prefixes.yaml +2 -0

index 2baee2c817c1a..59d4c8b068c4d 100644
@@ -611,6 +611,8 @@ patternProperties:
     description: Linux Automation GmbH
   "^macnica,.*":
     description: Macnica Americas
+  "^mantix,.*":
+    description: Mantix Display Technology Co.,Ltd.
   "^mapleboard,.*":
     description: Mapleboard.org
   "^marvell,.*":

Signature · 1 line

2.26.2

The panel uses a Focaltech FT8006p, the touch part is handled by the already existing edt-ft5x06.

Signed-off-by Guido Günther <[email protected]>

---
 .../display/panel/mantix,mlaf057we51-x.yaml   | 70 +++++++++++++++++++
 1 file changed, 70 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml

Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml new file +70 -0

new file mode 100644
index 0000000000000..937323cc9aaac
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/mantix,mlaf057we51-x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mantix MLAF057WE51-X 5.7" 720x1440 TFT LCD panel
+
+maintainers:
+  - Guido Günther <[email protected]>
+
+description:
+  Mantix MLAF057WE51 X is a 720x1440 TFT LCD panel connected using
+  a MIPI-DSI video interface.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - mantix,mlaf057we51-x
+
+  port: true
+  reg:
+    maxItems: 1
+    description: DSI virtual channel
+
+  avdd-supply:
+    description: Positive analog power supply
+
+  avee-supply:
+    description: Negative analog power supply
+
+  vddi-supply:
+    description: 1.8V I/O voltage supply
+
+  reset-gpios: true
+
+  backlight: true
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+  - avee-supply
+  - vddi-supply
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "mantix,mlaf057we51-x";
+            reg = <0>;
+            avdd-supply = <&reg_avdd>;
+            avee-supply = <&reg_avee>;
+            vddi-supply = <&reg_1v8_p>;
+            reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+            backlight = <&backlight>;
+        };
+    };
+
+...

Signature · 1 line

2.26.2

The panel uses a Focaltech FT8006p, the touch part is handled by the already existing edt-ft5x06.

Signed-off-by Guido Günther <[email protected]>

---
 MAINTAINERS                                   |   7 +
 drivers/gpu/drm/panel/Kconfig                 |  11 +
 drivers/gpu/drm/panel/Makefile                |   1 +
 .../gpu/drm/panel/panel-mantix-mlaf057we51.c  | 328 ++++++++++++++++++
 4 files changed, 347 insertions(+)
 create mode 100644 drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c

MAINTAINERS +7 -0

index 83ba7b62651f7..7dfe4cc3d4ec8 100644
@@ -5474,6 +5474,13 @@ S:	Maintained
 F:	drivers/gpu/drm/panel/panel-lvds.c
 F:	Documentation/devicetree/bindings/display/panel/lvds.yaml
 
+DRM DRIVER FOR MANTIX MLAF057WE51 PANELS
+M:	Guido Günther <[email protected]>
+R:	Purism Kernel Team <[email protected]>
+S:	Maintained
+F:	Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml
+F:	drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c
+
 DRM DRIVER FOR MATROX G200/G400 GRAPHICS CARDS
 S:	Orphan / Obsolete
 F:	drivers/gpu/drm/mga/

drivers/gpu/drm/panel/Kconfig +11 -0

index de2f2a452be55..8d97d07c58713 100644
@@ -217,6 +217,17 @@ config DRM_PANEL_NOVATEK_NT39016
 	  Say Y here if you want to enable support for the panels built
 	  around the Novatek NT39016 display controller.
 
+config DRM_PANEL_MANTIX_MLAF057WE51
+	tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for the Mantix
+	  MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
+	  has a resolution of 720x1440 pixels, a built in backlight and touch
+	  controller.
+
 config DRM_PANEL_OLIMEX_LCD_OLINUXINO
 	tristate "Olimex LCD-OLinuXino panel"
 	depends on OF

drivers/gpu/drm/panel/Makefile +1 -0

index e45ceac6286fd..15a4e77529514 100644
@@ -20,6 +20,7 @@ obj-$(CONFIG_DRM_PANEL_LG_LG4573) += panel-lg-lg4573.o
 obj-$(CONFIG_DRM_PANEL_NEC_NL8048HL11) += panel-nec-nl8048hl11.o
 obj-$(CONFIG_DRM_PANEL_NOVATEK_NT35510) += panel-novatek-nt35510.o
 obj-$(CONFIG_DRM_PANEL_NOVATEK_NT39016) += panel-novatek-nt39016.o
+obj-$(CONFIG_DRM_PANEL_MANTIX_MLAF057WE51) += panel-mantix-mlaf057we51.o
 obj-$(CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO) += panel-olimex-lcd-olinuxino.o
 obj-$(CONFIG_DRM_PANEL_ORISETECH_OTM8009A) += panel-orisetech-otm8009a.o
 obj-$(CONFIG_DRM_PANEL_OSD_OSD101T2587_53TS) += panel-osd-osd101t2587-53ts.o

drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c new file +9 -0

new file mode 100644
index 0000000000000..cd5424d5bdb63
@@ -0,0 +1,328 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Mantix MLAF057WE51 5.7" MIPI-DSI panel driver
+ *
+ * Copyright (C) Purism SPC 2020
+ */
+
+#include <linux/backlight.h>
+#include <linux/delay.h>

drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c new file +121 -0

+
+#define DRV_NAME "panel-mantix-mlaf057we51"
+
+/* Manufacturer specific Commands send via DSI */
+#define MANTIX_CMD_OTP_STOP_RELOAD_MIPI 0x41
+#define MANTIX_CMD_INT_CANCEL           0x4C
+
+struct mantix {
+	struct device *dev;
+	struct drm_panel panel;
+	struct gpio_desc *reset_gpio;
+
+	struct regulator *avdd;
+	struct regulator *avee;
+	struct regulator *vddi;
+};
+
+static inline struct mantix *panel_to_mantix(struct drm_panel *panel)
+{
+	return container_of(panel, struct mantix, panel);
+}
+
+#define dsi_generic_write_seq(dsi, seq...) do {				\
+		static const u8 d[] = { seq };				\
+		int ret;						\
+		ret = mipi_dsi_generic_write(dsi, d, ARRAY_SIZE(d));	\
+		if (ret < 0)						\
+			return ret;					\
+	} while (0)
+
+static int mantix_init_sequence(struct mantix *ctx)
+{
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+	struct device *dev = ctx->dev;
+
+	/*
+	 * Init sequence was supplied by the panel vendor.
+	 */
+	dsi_generic_write_seq(dsi, MANTIX_CMD_OTP_STOP_RELOAD_MIPI, 0x5A);
+
+	dsi_generic_write_seq(dsi, MANTIX_CMD_INT_CANCEL, 0x03);
+	dsi_generic_write_seq(dsi, MANTIX_CMD_OTP_STOP_RELOAD_MIPI, 0x5A, 0x03);
+	dsi_generic_write_seq(dsi, 0x80, 0xA9, 0x00);
+
+	dsi_generic_write_seq(dsi, MANTIX_CMD_OTP_STOP_RELOAD_MIPI, 0x5A, 0x09);
+	dsi_generic_write_seq(dsi, 0x80, 0x64, 0x00, 0x64, 0x00, 0x00);
+	msleep(20);
+
+	dev_dbg(dev, "Panel init sequence done\n");
+	return 0;
+}
+
+static int mantix_enable(struct drm_panel *panel)
+{
+	struct mantix *ctx = panel_to_mantix(panel);
+	struct device *dev = ctx->dev;
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(dev);
+	int ret;
+
+	ret = mantix_init_sequence(ctx);
+	if (ret < 0) {
+		dev_err(ctx->dev, "Panel init sequence failed: %d\n", ret);
+		return ret;
+	}
+
+	ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to exit sleep mode\n");
+		return ret;
+	}
+	msleep(20);
+
+	ret = mipi_dsi_dcs_set_display_on(dsi);
+	if (ret)
+		return ret;
+	usleep_range(10000, 12000);
+
+	ret = mipi_dsi_turn_on_peripheral(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to turn on peripheral\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int mantix_disable(struct drm_panel *panel)
+{
+	struct mantix *ctx = panel_to_mantix(panel);
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+	int ret;
+
+	ret = mipi_dsi_dcs_set_display_off(dsi);
+	if (ret < 0)
+		dev_err(ctx->dev, "Failed to turn off the display: %d\n", ret);
+
+	ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
+	if (ret < 0)
+		dev_err(ctx->dev, "Failed to enter sleep mode: %d\n", ret);
+
+
+	return 0;
+}
+
+static int mantix_unprepare(struct drm_panel *panel)
+{
+	struct mantix *ctx = panel_to_mantix(panel);
+
+	regulator_disable(ctx->avee);
+	regulator_disable(ctx->avdd);
+	/* T11 */
+	usleep_range(5000, 6000);
+	regulator_disable(ctx->vddi);
+	/* T14 */
+	msleep(50);
+
+	return 0;
+}
+
+static int mantix_prepare(struct drm_panel *panel)
+{

drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c new file +178 -0

+	/* T1 + T2 */
+	usleep_range(8000, 10000);
+
+	ret = regulator_enable(ctx->avdd);
+	if (ret < 0) {
+		dev_err(ctx->dev, "Failed to enable avdd supply: %d\n", ret);
+		return ret;
+	}
+
+	/* T2d */
+	usleep_range(3500, 4000);
+	ret = regulator_enable(ctx->avee);
+	if (ret < 0) {
+		dev_err(ctx->dev, "Failed to enable avee supply: %d\n", ret);
+		return ret;
+	}
+
+	/* T3+T5 */
+	usleep_range(10000, 12000);
+
+	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+	usleep_range(5150, 7000);
+
+	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+
+	/* T6 */
+	msleep(50);
+
+	return 0;
+}
+
+static const struct drm_display_mode default_mode = {
+	.hdisplay    = 720,
+	.hsync_start = 720 + 45,
+	.hsync_end   = 720 + 45 + 14,
+	.htotal	     = 720 + 45 + 14 + 25,
+	.vdisplay    = 1440,
+	.vsync_start = 1440 + 130,
+	.vsync_end   = 1440 + 130 + 8,
+	.vtotal	     = 1440 + 130 + 8 + 106,
+	.clock	     = 85298,
+	.flags	     = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
+	.width_mm    = 65,
+	.height_mm   = 130,
+};
+
+static int mantix_get_modes(struct drm_panel *panel,
+			    struct drm_connector *connector)
+{
+	struct mantix *ctx = panel_to_mantix(panel);
+	struct drm_display_mode *mode;
+
+	mode = drm_mode_duplicate(connector->dev, &default_mode);
+	if (!mode) {
+		dev_err(ctx->dev, "Failed to add mode %ux%u@%u\n",
+			default_mode.hdisplay, default_mode.vdisplay,
+			drm_mode_vrefresh(mode));
+		return -ENOMEM;
+	}
+
+	drm_mode_set_name(mode);
+
+	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+	connector->display_info.width_mm = mode->width_mm;
+	connector->display_info.height_mm = mode->height_mm;
+	drm_mode_probed_add(connector, mode);
+
+	return 1;
+}
+
+static const struct drm_panel_funcs mantix_drm_funcs = {
+	.disable   = mantix_disable,
+	.unprepare = mantix_unprepare,
+	.prepare   = mantix_prepare,
+	.enable	   = mantix_enable,
+	.get_modes = mantix_get_modes,
+};
+
+static int mantix_probe(struct mipi_dsi_device *dsi)
+{
+	struct device *dev = &dsi->dev;
+	struct mantix *ctx;
+	int ret;
+
+	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(ctx->reset_gpio)) {
+		dev_err(dev, "cannot get reset gpio\n");
+		return PTR_ERR(ctx->reset_gpio);
+	}
+
+	mipi_dsi_set_drvdata(dsi, ctx);
+	ctx->dev = dev;
+
+	dsi->lanes = 4;
+	dsi->format = MIPI_DSI_FMT_RGB888;
+	dsi->mode_flags = MIPI_DSI_MODE_VIDEO |
+		MIPI_DSI_MODE_VIDEO_BURST | MIPI_DSI_MODE_VIDEO_SYNC_PULSE;
+
+	ctx->avdd = devm_regulator_get(dev, "avdd");
+	if (IS_ERR(ctx->avdd))
+		return dev_err_probe(dev, PTR_ERR(ctx->avdd), "Failed to request avdd regulator\n");
+
+	ctx->avee = devm_regulator_get(dev, "avee");
+	if (IS_ERR(ctx->avee))
+		return dev_err_probe(dev, PTR_ERR(ctx->avee), "Failed to request avee regulator\n");
+
+	ctx->vddi = devm_regulator_get(dev, "vddi");
+	if (IS_ERR(ctx->vddi))
+		return dev_err_probe(dev, PTR_ERR(ctx->vddi), "Failed to request vddi regulator\n");
+
+	drm_panel_init(&ctx->panel, dev, &mantix_drm_funcs,
+		       DRM_MODE_CONNECTOR_DSI);
+
+	ret = drm_panel_of_backlight(&ctx->panel);
+	if (ret)
+		return ret;
+
+	drm_panel_add(&ctx->panel);
+
+	ret = mipi_dsi_attach(dsi);
+	if (ret < 0) {
+		dev_err(dev, "mipi_dsi_attach failed (%d). Is host ready?\n", ret);
+		drm_panel_remove(&ctx->panel);
+		return ret;
+	}
+
+	dev_info(dev, "%ux%u@%u %ubpp dsi %udl - ready\n",
+		 default_mode.hdisplay, default_mode.vdisplay,
+		 drm_mode_vrefresh(&default_mode),
+		 mipi_dsi_pixel_format_to_bpp(dsi->format), dsi->lanes);
+
+	return 0;
+}
+
+static void mantix_shutdown(struct mipi_dsi_device *dsi)
+{
+	struct mantix *ctx = mipi_dsi_get_drvdata(dsi);
+
+	drm_panel_unprepare(&ctx->panel);
+	drm_panel_disable(&ctx->panel);
+}
+
+static int mantix_remove(struct mipi_dsi_device *dsi)
+{
+	struct mantix *ctx = mipi_dsi_get_drvdata(dsi);
+
+	mantix_shutdown(dsi);
+
+	mipi_dsi_detach(dsi);
+	drm_panel_remove(&ctx->panel);
+
+	return 0;
+}
+
+static const struct of_device_id mantix_of_match[] = {
+	{ .compatible = "mantix,mlaf057we51-x" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mantix_of_match);
+
+static struct mipi_dsi_driver mantix_driver = {
+	.probe	= mantix_probe,
+	.remove = mantix_remove,
+	.shutdown = mantix_shutdown,
+	.driver = {
+		.name = DRV_NAME,
+		.of_match_table = mantix_of_match,
+	},
+};
+module_mipi_dsi_driver(mantix_driver);
+
+MODULE_AUTHOR("Guido Günther <[email protected]>");
+MODULE_DESCRIPTION("DRM driver for Mantix MLAF057WE51-X MIPI DSI panel");
+MODULE_LICENSE("GPL v2");

Signature · 1 line

2.26.2

Hi Guido.

Quoted 3 lines · Guido Günther

The panel uses a Focaltech FT8006p, the touch part is handled by the already existing edt-ft5x06.

Quoted 1 line

Signed-off-by Guido Günther <[email protected]>

Two small nits - otherwise looks good.

Reviewed-by Sam Ravnborg <[email protected]>

I can fix while applying or you can send a new revision, but I cannot apply until drm-misc-next have seen a backmerge due to dev_err_probe() usage.

Did you have commit rights yet?
If yes, then please apply yourself.

Sam

Quoted 75 lines

---
 MAINTAINERS                                   |   7 +
 drivers/gpu/drm/panel/Kconfig                 |  11 +
 drivers/gpu/drm/panel/Makefile                |   1 +
 .../gpu/drm/panel/panel-mantix-mlaf057we51.c  | 328 ++++++++++++++++++
 4 files changed, 347 insertions(+)
 create mode 100644 drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c

MAINTAINERS +7 -0

index 83ba7b62651f7..7dfe4cc3d4ec8 100644
@@ -5474,6 +5474,13 @@ S:	Maintained
 F:	drivers/gpu/drm/panel/panel-lvds.c
 F:	Documentation/devicetree/bindings/display/panel/lvds.yaml
 
+DRM DRIVER FOR MANTIX MLAF057WE51 PANELS
+M:	Guido Günther <[email protected]>
+R:	Purism Kernel Team <[email protected]>
+S:	Maintained
+F:	Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml
+F:	drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c
+
 DRM DRIVER FOR MATROX G200/G400 GRAPHICS CARDS
 S:	Orphan / Obsolete
 F:	drivers/gpu/drm/mga/

drivers/gpu/drm/panel/Kconfig +11 -0

index de2f2a452be55..8d97d07c58713 100644
@@ -217,6 +217,17 @@ config DRM_PANEL_NOVATEK_NT39016
 	  Say Y here if you want to enable support for the panels built
 	  around the Novatek NT39016 display controller.
 
+config DRM_PANEL_MANTIX_MLAF057WE51
+	tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for the Mantix
+	  MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
+	  has a resolution of 720x1440 pixels, a built in backlight and touch
+	  controller.
+
 config DRM_PANEL_OLIMEX_LCD_OLINUXINO
 	tristate "Olimex LCD-OLinuXino panel"
 	depends on OF

drivers/gpu/drm/panel/Makefile +1 -0

index e45ceac6286fd..15a4e77529514 100644
@@ -20,6 +20,7 @@ obj-$(CONFIG_DRM_PANEL_LG_LG4573) += panel-lg-lg4573.o
 obj-$(CONFIG_DRM_PANEL_NEC_NL8048HL11) += panel-nec-nl8048hl11.o
 obj-$(CONFIG_DRM_PANEL_NOVATEK_NT35510) += panel-novatek-nt35510.o
 obj-$(CONFIG_DRM_PANEL_NOVATEK_NT39016) += panel-novatek-nt39016.o
+obj-$(CONFIG_DRM_PANEL_MANTIX_MLAF057WE51) += panel-mantix-mlaf057we51.o
 obj-$(CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO) += panel-olimex-lcd-olinuxino.o
 obj-$(CONFIG_DRM_PANEL_ORISETECH_OTM8009A) += panel-orisetech-otm8009a.o
 obj-$(CONFIG_DRM_PANEL_OSD_OSD101T2587_53TS) += panel-osd-osd101t2587-53ts.o

drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c new file +9 -0

new file mode 100644
index 0000000000000..cd5424d5bdb63
@@ -0,0 +1,328 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Mantix MLAF057WE51 5.7" MIPI-DSI panel driver
+ *
+ * Copyright (C) Purism SPC 2020
+ */
+
+#include <linux/backlight.h>
+#include <linux/delay.h>

drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c line 19

Quoted 10 lines

drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c new file +10 -0

+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/regulator/consumer.h>
+
+#include <video/mipi_display.h>
+
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_print.h>

drm_print.h is no longer used - drop.

Quoted 121 lines

drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c new file +121 -0

+
+#define DRV_NAME "panel-mantix-mlaf057we51"
+
+/* Manufacturer specific Commands send via DSI */
+#define MANTIX_CMD_OTP_STOP_RELOAD_MIPI 0x41
+#define MANTIX_CMD_INT_CANCEL           0x4C
+
+struct mantix {
+	struct device *dev;
+	struct drm_panel panel;
+	struct gpio_desc *reset_gpio;
+
+	struct regulator *avdd;
+	struct regulator *avee;
+	struct regulator *vddi;
+};
+
+static inline struct mantix *panel_to_mantix(struct drm_panel *panel)
+{
+	return container_of(panel, struct mantix, panel);
+}
+
+#define dsi_generic_write_seq(dsi, seq...) do {				\
+		static const u8 d[] = { seq };				\
+		int ret;						\
+		ret = mipi_dsi_generic_write(dsi, d, ARRAY_SIZE(d));	\
+		if (ret < 0)						\
+			return ret;					\
+	} while (0)
+
+static int mantix_init_sequence(struct mantix *ctx)
+{
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+	struct device *dev = ctx->dev;
+
+	/*
+	 * Init sequence was supplied by the panel vendor.
+	 */
+	dsi_generic_write_seq(dsi, MANTIX_CMD_OTP_STOP_RELOAD_MIPI, 0x5A);
+
+	dsi_generic_write_seq(dsi, MANTIX_CMD_INT_CANCEL, 0x03);
+	dsi_generic_write_seq(dsi, MANTIX_CMD_OTP_STOP_RELOAD_MIPI, 0x5A, 0x03);
+	dsi_generic_write_seq(dsi, 0x80, 0xA9, 0x00);
+
+	dsi_generic_write_seq(dsi, MANTIX_CMD_OTP_STOP_RELOAD_MIPI, 0x5A, 0x09);
+	dsi_generic_write_seq(dsi, 0x80, 0x64, 0x00, 0x64, 0x00, 0x00);
+	msleep(20);
+
+	dev_dbg(dev, "Panel init sequence done\n");
+	return 0;
+}
+
+static int mantix_enable(struct drm_panel *panel)
+{
+	struct mantix *ctx = panel_to_mantix(panel);
+	struct device *dev = ctx->dev;
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(dev);
+	int ret;
+
+	ret = mantix_init_sequence(ctx);
+	if (ret < 0) {
+		dev_err(ctx->dev, "Panel init sequence failed: %d\n", ret);
+		return ret;
+	}
+
+	ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to exit sleep mode\n");
+		return ret;
+	}
+	msleep(20);
+
+	ret = mipi_dsi_dcs_set_display_on(dsi);
+	if (ret)
+		return ret;
+	usleep_range(10000, 12000);
+
+	ret = mipi_dsi_turn_on_peripheral(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to turn on peripheral\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int mantix_disable(struct drm_panel *panel)
+{
+	struct mantix *ctx = panel_to_mantix(panel);
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+	int ret;
+
+	ret = mipi_dsi_dcs_set_display_off(dsi);
+	if (ret < 0)
+		dev_err(ctx->dev, "Failed to turn off the display: %d\n", ret);
+
+	ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
+	if (ret < 0)
+		dev_err(ctx->dev, "Failed to enter sleep mode: %d\n", ret);
+
+
+	return 0;
+}
+
+static int mantix_unprepare(struct drm_panel *panel)
+{
+	struct mantix *ctx = panel_to_mantix(panel);
+
+	regulator_disable(ctx->avee);
+	regulator_disable(ctx->avdd);
+	/* T11 */
+	usleep_range(5000, 6000);
+	regulator_disable(ctx->vddi);
+	/* T14 */
+	msleep(50);
+
+	return 0;
+}
+
+static int mantix_prepare(struct drm_panel *panel)
+{

drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c line 150

Quoted 10 lines

drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c new file +10 -0

+	struct mantix *ctx = panel_to_mantix(panel);
+	int ret;
+
+	/* Focaltech FT8006P, section 7.3.1 and 7.3.4 */
+	dev_dbg(ctx->dev, "Resetting the panel\n");
+	ret = regulator_enable(ctx->vddi);
+	if (ret < 0) {
+		dev_err(ctx->dev, "Failed to enable vddi supply: %d\n", ret);
+		return ret;
+	}

Maybe add one empty line here

Quoted 172 lines

drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c new file +172 -0

+	/* T1 + T2 */
+	usleep_range(8000, 10000);
+
+	ret = regulator_enable(ctx->avdd);
+	if (ret < 0) {
+		dev_err(ctx->dev, "Failed to enable avdd supply: %d\n", ret);
+		return ret;
+	}
+
+	/* T2d */
+	usleep_range(3500, 4000);
+	ret = regulator_enable(ctx->avee);
+	if (ret < 0) {
+		dev_err(ctx->dev, "Failed to enable avee supply: %d\n", ret);
+		return ret;
+	}
+
+	/* T3+T5 */
+	usleep_range(10000, 12000);
+
+	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+	usleep_range(5150, 7000);
+
+	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+
+	/* T6 */
+	msleep(50);
+
+	return 0;
+}
+
+static const struct drm_display_mode default_mode = {
+	.hdisplay    = 720,
+	.hsync_start = 720 + 45,
+	.hsync_end   = 720 + 45 + 14,
+	.htotal	     = 720 + 45 + 14 + 25,
+	.vdisplay    = 1440,
+	.vsync_start = 1440 + 130,
+	.vsync_end   = 1440 + 130 + 8,
+	.vtotal	     = 1440 + 130 + 8 + 106,
+	.clock	     = 85298,
+	.flags	     = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
+	.width_mm    = 65,
+	.height_mm   = 130,
+};
+
+static int mantix_get_modes(struct drm_panel *panel,
+			    struct drm_connector *connector)
+{
+	struct mantix *ctx = panel_to_mantix(panel);
+	struct drm_display_mode *mode;
+
+	mode = drm_mode_duplicate(connector->dev, &default_mode);
+	if (!mode) {
+		dev_err(ctx->dev, "Failed to add mode %ux%u@%u\n",
+			default_mode.hdisplay, default_mode.vdisplay,
+			drm_mode_vrefresh(mode));
+		return -ENOMEM;
+	}
+
+	drm_mode_set_name(mode);
+
+	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+	connector->display_info.width_mm = mode->width_mm;
+	connector->display_info.height_mm = mode->height_mm;
+	drm_mode_probed_add(connector, mode);
+
+	return 1;
+}
+
+static const struct drm_panel_funcs mantix_drm_funcs = {
+	.disable   = mantix_disable,
+	.unprepare = mantix_unprepare,
+	.prepare   = mantix_prepare,
+	.enable	   = mantix_enable,
+	.get_modes = mantix_get_modes,
+};
+
+static int mantix_probe(struct mipi_dsi_device *dsi)
+{
+	struct device *dev = &dsi->dev;
+	struct mantix *ctx;
+	int ret;
+
+	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(ctx->reset_gpio)) {
+		dev_err(dev, "cannot get reset gpio\n");
+		return PTR_ERR(ctx->reset_gpio);
+	}
+
+	mipi_dsi_set_drvdata(dsi, ctx);
+	ctx->dev = dev;
+
+	dsi->lanes = 4;
+	dsi->format = MIPI_DSI_FMT_RGB888;
+	dsi->mode_flags = MIPI_DSI_MODE_VIDEO |
+		MIPI_DSI_MODE_VIDEO_BURST | MIPI_DSI_MODE_VIDEO_SYNC_PULSE;
+
+	ctx->avdd = devm_regulator_get(dev, "avdd");
+	if (IS_ERR(ctx->avdd))
+		return dev_err_probe(dev, PTR_ERR(ctx->avdd), "Failed to request avdd regulator\n");
+
+	ctx->avee = devm_regulator_get(dev, "avee");
+	if (IS_ERR(ctx->avee))
+		return dev_err_probe(dev, PTR_ERR(ctx->avee), "Failed to request avee regulator\n");
+
+	ctx->vddi = devm_regulator_get(dev, "vddi");
+	if (IS_ERR(ctx->vddi))
+		return dev_err_probe(dev, PTR_ERR(ctx->vddi), "Failed to request vddi regulator\n");
+
+	drm_panel_init(&ctx->panel, dev, &mantix_drm_funcs,
+		       DRM_MODE_CONNECTOR_DSI);
+
+	ret = drm_panel_of_backlight(&ctx->panel);
+	if (ret)
+		return ret;
+
+	drm_panel_add(&ctx->panel);
+
+	ret = mipi_dsi_attach(dsi);
+	if (ret < 0) {
+		dev_err(dev, "mipi_dsi_attach failed (%d). Is host ready?\n", ret);
+		drm_panel_remove(&ctx->panel);
+		return ret;
+	}
+
+	dev_info(dev, "%ux%u@%u %ubpp dsi %udl - ready\n",
+		 default_mode.hdisplay, default_mode.vdisplay,
+		 drm_mode_vrefresh(&default_mode),
+		 mipi_dsi_pixel_format_to_bpp(dsi->format), dsi->lanes);
+
+	return 0;
+}
+
+static void mantix_shutdown(struct mipi_dsi_device *dsi)
+{
+	struct mantix *ctx = mipi_dsi_get_drvdata(dsi);
+
+	drm_panel_unprepare(&ctx->panel);
+	drm_panel_disable(&ctx->panel);
+}
+
+static int mantix_remove(struct mipi_dsi_device *dsi)
+{
+	struct mantix *ctx = mipi_dsi_get_drvdata(dsi);
+
+	mantix_shutdown(dsi);
+
+	mipi_dsi_detach(dsi);
+	drm_panel_remove(&ctx->panel);
+
+	return 0;
+}
+
+static const struct of_device_id mantix_of_match[] = {
+	{ .compatible = "mantix,mlaf057we51-x" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mantix_of_match);
+
+static struct mipi_dsi_driver mantix_driver = {
+	.probe	= mantix_probe,
+	.remove = mantix_remove,
+	.shutdown = mantix_shutdown,
+	.driver = {
+		.name = DRV_NAME,
+		.of_match_table = mantix_of_match,
+	},

Quoted 8 lines

drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c new file +6 -0

+};
+module_mipi_dsi_driver(mantix_driver);
+
+MODULE_AUTHOR("Guido Günther <[email protected]>");
+MODULE_DESCRIPTION("DRM driver for Mantix MLAF057WE51-X MIPI DSI panel");
+MODULE_LICENSE("GPL v2");

Signature · 1 line

2.26.2

Hi Sam,
thanks for having a look!

Quoted 6 lines · Sam Ravnborg

Hi Guido.

Quoted 3 lines · Guido Günther

The panel uses a Focaltech FT8006p, the touch part is handled by the already existing edt-ft5x06.

Quoted 8 lines

Quoted 1 line

Signed-off-by Guido Günther <[email protected]>

Two small nits - otherwise looks good.

Reviewed-by Sam Ravnborg <[email protected]>

I can fix while applying or you can send a new revision, but I cannot apply until drm-misc-next have seen a backmerge due to dev_err_probe() usage.

I'll send out a v3 with this fixed.

Quoted 2 lines

Did you have commit rights yet?
If yes, then please apply yourself.

No commit rights here. So it would be great if you could apply the patches. Should I look for commit rights? I assume that means following

https://drm.pages.freedesktop.org/maintainer-tools/commit-access.html#drm-misc

Quoted 24 lines · Guido Günther

Hi Sam,
thanks for having a look!

Quoted 6 lines · Sam Ravnborg

Hi Guido.

Quoted 3 lines · Guido Günther

The panel uses a Focaltech FT8006p, the touch part is handled by the already existing edt-ft5x06.

Quoted 8 lines

Quoted 1 line

Signed-off-by Guido Günther <[email protected]>

Two small nits - otherwise looks good.

Reviewed-by Sam Ravnborg <[email protected]>

I can fix while applying or you can send a new revision, but I cannot apply until drm-misc-next have seen a backmerge due to dev_err_probe() usage.

I'll send out a v3 with this fixed.

Quoted 2 lines

Did you have commit rights yet?
If yes, then please apply yourself.

Quoted 4 lines

No commit rights here. So it would be great if you could apply the patches. Should I look for commit rights? I assume that means following

https://drm.pages.freedesktop.org/maintainer-tools/commit-access.html#drm-misc

I recall we discussed this before for some other driver. For a single panel it is not needed, but if you continue to be active on other parts it makes sense.

I will apply v3 when drm-misc-next is backmeged unless you tell me otherwise. And ping me if I forgets.