Skip to contentSkip to conversation

add some power supply properties about wireless/wired charging

PATCH New Qiwu Huang 1 participant 5 messages Aug 25, 2020

Subsystems (2)
lore
Share & tools
lore

Qiwu Huang

author
#0 lore raw

v10 cover add some power supply properties about wireless/wired charging

From: Qiwu Huang <[email protected]>

This patchset aims to provide power supply properties about wireless/wired charging. "quick_charge_type" reports different types of quick charge based on the charging power; "tx_adapter" shows" the type of wireless charging adapter; "signal_strength" shows the coupling level between TX and RX; "reverse_chg_mode" provides the interface of enabling/disabling wireless reverse charging.

Changes in V10
- Fix build error on linus/master v5.9-rc2 next-20200824 Reported-by: kernel test robot <[email protected]>
- Fix build error on power-supply/for-next Reported-by: kernel test robot <[email protected]>

Changes in v9
- Set bat_imax When get quick charger type

Changes in v8
- Add quick charge type driver in qcom_smbb suggested by GregKH

Changes in v7
- Fix PATCH version error in 0/X email

Changes in v6
- Replace "phones" with "devices" suggested by GregKH
- Add permission statement for "reverse_chg_mode"
- Update description for "reverse_chg_mode" in ABI suggested by GregKH
- Update description for "PING phase" in ABI suggested by GregKH

Changes in v5
- Add details in 0/X email

Changes in v4
- Exclude the patch of "power: supply: supply battery soc with decimal form"
- Fix some typo

Changes in v3
- Add enumederated for quick charge type
- Add enumederated for tx adapter type
- Update the return type and description in ABI

Changes in v2
- modify to capital letters for "power_supply_attrs"
- Update the return type and description in ABI

Qiwu Huang (4):
power: supply: core: add quick charge type property
power: supply: core: add wireless charger adapter type property
power: supply: core: add wireless signal strength property
power: supply: core: property to control reverse charge

 Documentation/ABI/testing/sysfs-class-power | 85 +++++++++++++++++++++
 drivers/power/supply/power_supply_sysfs.c   |  4 +
 drivers/power/supply/qcom_smbb.c            | 81 +++++++++++++++++++-
 include/linux/power_supply.h                | 35 +++++++++
 4 files changed, 204 insertions(+), 1 deletion(-)

base-commit: 6a9dc5fd6170d0a41c8a14eb19e63d94bea5705a

Signature · 1 line
2.28.0
author
#1 lore raw

PATCH v10 1/4 power: supply: core: add quick charge type property

From: Qiwu Huang <[email protected]>

Reports the kind of quick charge type based on
different adapter power.

---
 Documentation/ABI/testing/sysfs-class-power | 21 ++++++
 drivers/power/supply/power_supply_sysfs.c   |  1 +
 drivers/power/supply/qcom_smbb.c            | 81 ++++++++++++++++++++-
 include/linux/power_supply.h                | 14 ++++
 4 files changed, 116 insertions(+), 1 deletion(-)
Documentation/ABI/testing/sysfs-class-power +21 -0
index 40213c73bc9c..a6ec1c45adee 100644
@@ -709,3 +709,24 @@ Description:
 
 		Access: Read
 		Valid values: 1-31
+
+What:		/sys/class/power_supply/<supply_name>/quick_charge_type
+Date:		Jul 2020
+Contact:	Fei Jiang <[email protected]>
+		Description:
+		Reports the kind of quick charge type based on different adapter power.
+		Different quick charge type represent different charging power.
+		QUICK_CHARGE_NORMAL : Charging Power <= 10W
+		QUICK_CHARGE_FAST : 10W < Charging Power <= 20W
+		QUICK_CHARGE_FLASH : 20W < Charging Power <= 30W
+		QUICK_CHARGE_TURBE : 30W < Charging Power <= 50W
+		QUICK_CHARGE_SUPER : Charging Power > 50W
+
+		Access: Read-Only
+		Valid values:
+			0: QUICK_CHARGE_NORMAL,
+			1: QUICK_CHARGE_FAST,
+			2: QUICK_CHARGE_FLASH,
+			3: QUICK_CHARGE_TURBE,
+			4: QUICK_CHARGE_SUPER.
+
drivers/power/supply/power_supply_sysfs.c +1 -0
index 3d383086018c..67f568c88c0b 100644
@@ -210,6 +210,7 @@ static struct power_supply_attr power_supply_attrs[] = {
 	POWER_SUPPLY_ATTR(MODEL_NAME),
 	POWER_SUPPLY_ATTR(MANUFACTURER),
 	POWER_SUPPLY_ATTR(SERIAL_NUMBER),
+	POWER_SUPPLY_ATTR(QUICK_CHARGE_TYPE),
 };
 
 static struct attribute *
drivers/power/supply/qcom_smbb.c +80 -1

121 lines not on this page · raw message

include/linux/power_supply.h +14 -0
index 97cc4b85bf61..24b31b7e88a0 100644
@@ -171,6 +171,7 @@ enum power_supply_property {
 	POWER_SUPPLY_PROP_MODEL_NAME,
 	POWER_SUPPLY_PROP_MANUFACTURER,
 	POWER_SUPPLY_PROP_SERIAL_NUMBER,
+	POWER_SUPPLY_PROP_QUICK_CHARGE_TYPE,
 };
 
 enum power_supply_type {
@@ -186,6 +187,10 @@ enum power_supply_type {
 	POWER_SUPPLY_TYPE_USB_PD,		/* Power Delivery Port */
 	POWER_SUPPLY_TYPE_USB_PD_DRP,		/* PD Dual Role Port */
 	POWER_SUPPLY_TYPE_APPLE_BRICK_ID,	/* Apple Charging Method */
+	POWER_SUPPLY_TYPE_USB_HVDCP,		/* High Voltage DCP */
+	POWER_SUPPLY_TYPE_USB_HVDCP_3,		/* Efficient High Voltage DCP */
+	POWER_SUPPLY_TYPE_USB_HVDCP_3P5,	/* Efficient High Voltage DCP */
+	POWER_SUPPLY_TYPE_USB_FLOAT,		/* Floating charger */
 };
 
 enum power_supply_usb_type {
@@ -201,6 +206,15 @@ enum power_supply_usb_type {
 	POWER_SUPPLY_USB_TYPE_APPLE_BRICK_ID,	/* Apple Charging Method */
 };
 
+enum power_supply_quick_charge_type {
+	QUICK_CHARGE_NORMAL = 0,		/* Charging Power <= 10W */
+	QUICK_CHARGE_FAST,			/* 10W < Charging Power <= 20W */
+	QUICK_CHARGE_FLASH,			/* 20W < Charging Power <= 30W */
+	QUICK_CHARGE_TURBE,			/* 30W < Charging Power <= 50W */
+	QUICK_CHARGE_SUPER,			/* Charging Power > 50W */
+	QUICK_CHARGE_MAX,
+};
+
 enum power_supply_notifier_events {
 	PSY_EVENT_PROP_CHANGED,
 };
Signature · 1 line
2.28.0
author
#2 lore raw

PATCH v10 2/4 power: supply: core: add wireless charger adapter type property

In reply to Qiwu Huang

From: Qiwu Huang <[email protected]>

Reports what type of wireless adapter connection is currently active for the supply.
for example it can show if ADAPTER_PD capable source is attached.

---
 Documentation/ABI/testing/sysfs-class-power | 28 +++++++++++++++++++++
 drivers/power/supply/power_supply_sysfs.c   |  1 +
 include/linux/power_supply.h                | 19 ++++++++++++++
 3 files changed, 48 insertions(+)
Documentation/ABI/testing/sysfs-class-power +28 -0
index a6ec1c45adee..2850adbc8c58 100644
@@ -730,3 +730,31 @@ Contact:	Fei Jiang <[email protected]>
 			3: QUICK_CHARGE_TURBE,
 			4: QUICK_CHARGE_SUPER.
 
+===== Wireless Charger Properties =====
+What:		/sys/class/power_supply/<supply_name>/tx_adapter
+Date:		Jul 2020
+Contact:	Fei Jiang <[email protected]>
+Description:
+		Reports the type of wireless adapter connection is currently active for
+		the supply, for example it can show if ADAPTER_PD capable source
+		is attached. Expect common wireless adapter type, also increase by
+		some vendor private adapter type(ex. ADAPTER_PD_40W).
+
+		Access: Read-Only
+		Valid values:
+			0: ADAPTER_NONE,
+			1: ADAPTER_SDP,
+			2: ADAPTER_DCP,
+			3: ADAPTER_CDP,
+			4: ADAPTER_OCP,
+			5: ADAPTER_QC2,
+			6: ADAPTER_QC3,
+			7: ADAPTER_PD,
+			8: ADAPTER_AUTH_FAILED,
+			9: ADAPTER_PRIVATE_QC3,
+			10: ADAPTER_PRIVATE_PD,
+			11: ADAPTER_CAR_POWER,
+			12: ADAPTER_PRIVATE_PD_40W,
+			13: ADAPTER_VOICE_BOX,
+			14: ADAPTER_PRIVATE_PD_50W.
+
drivers/power/supply/power_supply_sysfs.c +1 -0
index 67f568c88c0b..76de6ae199d3 100644
@@ -211,6 +211,7 @@ static struct power_supply_attr power_supply_attrs[] = {
 	POWER_SUPPLY_ATTR(MANUFACTURER),
 	POWER_SUPPLY_ATTR(SERIAL_NUMBER),
 	POWER_SUPPLY_ATTR(QUICK_CHARGE_TYPE),
+	POWER_SUPPLY_ATTR(TX_ADAPTER),
 };
 
 static struct attribute *
include/linux/power_supply.h +19 -0
index 24b31b7e88a0..4e161d8961c1 100644
@@ -172,6 +172,7 @@ enum power_supply_property {
 	POWER_SUPPLY_PROP_MANUFACTURER,
 	POWER_SUPPLY_PROP_SERIAL_NUMBER,
 	POWER_SUPPLY_PROP_QUICK_CHARGE_TYPE,
+	POWER_SUPPLY_PROP_TX_ADAPTER,
 };
 
 enum power_supply_type {
@@ -215,6 +216,24 @@ enum power_supply_quick_charge_type {
 	QUICK_CHARGE_MAX,
 };
 
+enum power_supply_tx_adapter_type {
+	ADAPTER_NONE = 0,			/* Nothing Attached */
+	ADAPTER_SDP,				/* Standard Downstream Port */
+	ADAPTER_CDP,				/* Charging Downstream Port */
+	ADAPTER_DCP,				/* Dedicated Charging Port */
+	ADAPTER_OCP,				/* Other Charging Port */
+	ADAPTER_QC2,				/* Qualcomm Charge 2.0 */
+	ADAPTER_QC3,				/* Qualcomm Charge 3.0 */
+	ADAPTER_PD,				/* Power Delivery Port */
+	ADAPTER_AUTH_FAILED,			/* Authenticated Failed Adapter */
+	ADAPTER_PRIVATE_QC3,			/* Qualcomm Charge 3.0 with Private Protocol */
+	ADAPTER_PRIVATE_PD,			/* PD Adapter with Private Protocol */
+	ADAPTER_CAR_POWER,			/* Wireless Car Charger */
+	ADAPTER_PRIVATE_PD_40W,			/* 40W PD Adapter with Private Protocol */
+	ADAPTER_VOICE_BOX,			/* Voice Box which Support Wireless Charger */
+	ADAPTER_PRIVATE_PD_50W,			/* 50W PD Adapter with Private Protocol */
+};
+
 enum power_supply_notifier_events {
 	PSY_EVENT_PROP_CHANGED,
 };
Signature · 1 line
2.28.0
author
#3 lore raw

PATCH v10 3/4 power: supply: core: add wireless signal strength property

In reply to Qiwu Huang

From: Qiwu Huang <[email protected]>

reports wireless signal strength.
The value show degree of coupling between tx and rx.

---
 Documentation/ABI/testing/sysfs-class-power | 22 +++++++++++++++++++++
 drivers/power/supply/power_supply_sysfs.c   |  1 +
 include/linux/power_supply.h                |  1 +
 3 files changed, 24 insertions(+)
Documentation/ABI/testing/sysfs-class-power +22 -0
index 2850adbc8c58..c3a547037d07 100644
@@ -758,3 +758,25 @@ Description:
 			13: ADAPTER_VOICE_BOX,
 			14: ADAPTER_PRIVATE_PD_50W.
 
+What:		/sys/class/power_supply/<supply_name>/signal_strength
+Date:		Jul 2020
+Contact:	Fei Jiang <[email protected]>
+Description:
+		In PING phase, RX transmits a signal strength packet as the
+		first communication packet to instruct the base to keep power
+		signal on.The value reports wireless signal strength and show
+		degree of coupling.
+
+		The Qi Wireless Power Transfer System is published by the
+		Wireless Power Consortium.The ping phase is the necessary stage
+		for matching transmitter and receiver. In this phase,the Power
+		Transmitter executes a Digital Ping, and listens for a response.
+		If the Power Transmitter discovers a Power Receiver, the Power
+		Transmitter may extend the Digital Ping,i.e. maintain the Power
+		Signal at the level of the Digital Ping. This causes the system
+		to proceed to the identification & configuration phase. If the
+		Power Transmitter does not extend the Digital Ping, the system
+		shall revert to the selection phase.
+
+		Access: Read-Only
+		Valid values: 0 - 100
drivers/power/supply/power_supply_sysfs.c +1 -0
index 76de6ae199d3..64e6bdd91edf 100644
@@ -212,6 +212,7 @@ static struct power_supply_attr power_supply_attrs[] = {
 	POWER_SUPPLY_ATTR(SERIAL_NUMBER),
 	POWER_SUPPLY_ATTR(QUICK_CHARGE_TYPE),
 	POWER_SUPPLY_ATTR(TX_ADAPTER),
+	POWER_SUPPLY_ATTR(SIGNAL_STRENGTH),
 };
 
 static struct attribute *
include/linux/power_supply.h +1 -0
index 4e161d8961c1..496d1faecdd1 100644
@@ -173,6 +173,7 @@ enum power_supply_property {
 	POWER_SUPPLY_PROP_SERIAL_NUMBER,
 	POWER_SUPPLY_PROP_QUICK_CHARGE_TYPE,
 	POWER_SUPPLY_PROP_TX_ADAPTER,
+	POWER_SUPPLY_PROP_SIGNAL_STRENGTH,
 };
 
 enum power_supply_type {
Signature · 1 line
2.28.0
author
#4 lore raw

PATCH v10 4/4 power: supply: core: property to control reverse charge

In reply to Qiwu Huang

From: Qiwu Huang <[email protected]>

Interface to control wireless reverse charge.

---
 Documentation/ABI/testing/sysfs-class-power | 14 ++++++++++++++
 drivers/power/supply/power_supply_sysfs.c   |  1 +
 include/linux/power_supply.h                |  1 +
 3 files changed, 16 insertions(+)
Documentation/ABI/testing/sysfs-class-power +14 -0
index c3a547037d07..e0adb22a6648 100644
@@ -780,3 +780,17 @@ Description:
 
 		Access: Read-Only
 		Valid values: 0 - 100
+
+What:		/sys/class/power_supply/<supply_name>/reverse_chg_mode
+Date:		Jul 2020
+Contact:	Fei Jiang <[email protected]>
+Description:
+		Some devices support wireless reverse charge function which
+		charge other devices.The property provider interface to
+		enable/disable wireless reverse charge.If enabled, start TX
+		mode and detect RX. Disabled when timeout or manual setting.
+
+		Access: Read, Write
+		Valid values:
+		- 1: enabled
+		- 0: disabled
drivers/power/supply/power_supply_sysfs.c +1 -0
index 64e6bdd91edf..403a1787fada 100644
@@ -213,6 +213,7 @@ static struct power_supply_attr power_supply_attrs[] = {
 	POWER_SUPPLY_ATTR(QUICK_CHARGE_TYPE),
 	POWER_SUPPLY_ATTR(TX_ADAPTER),
 	POWER_SUPPLY_ATTR(SIGNAL_STRENGTH),
+	POWER_SUPPLY_ATTR(REVERSE_CHG_MODE),
 };
 
 static struct attribute *
include/linux/power_supply.h +1 -0
index 496d1faecdd1..ee156492c566 100644
@@ -174,6 +174,7 @@ enum power_supply_property {
 	POWER_SUPPLY_PROP_QUICK_CHARGE_TYPE,
 	POWER_SUPPLY_PROP_TX_ADAPTER,
 	POWER_SUPPLY_PROP_SIGNAL_STRENGTH,
+	POWER_SUPPLY_PROP_REVERSE_CHG_MODE,
 };
 
 enum power_supply_type {
Signature · 1 line
2.28.0