i2c: add driver for Mellanox BlueField SoC
Khalil Blaiech
maintainerv9 cover i2c: add driver for Mellanox BlueField SoC
From: Khalil Blaiech <[email protected]>
Add I2C SMBus driver and device tree bindings documentation.
The Mellanox BlueField is a System-on-Chip (SoC) that combines Arm cores and ConnectX network adapter technology intended to accelerate storage network solutions. The Mellanox BlueField incorporates various I2C devices that are accessed using SMBus protocol, a variant of the I2C protocol. On storage controllers, the BlueField SoC is connected to a management controller board, e.g., BMC via an I2C bus.
An I2C driver running on the Arm side is needed to manage the hardware I2C controllers. The driver enables a master function to transfer data back and forth from/to I2C devices, such as EEPROM parts and implements a slave function to handle the BMC controller requests.
---v8->v9:
- Fixing implicit declaration of devm_ioremap_nocache and ioremap_nocache build error.v7->v8:
- Updating the dependency expression in Kconfig.
- Fixing an implicit fallthrough build error.v6->v7:
- Fixing kernel coding style issues as suggested by Mellanox internal code reviewers.
- Updating the dependency expression in Kconfig.
- Fixing various device driver bugs.
- Adding an entry to MAINTAINERS file.v5->v6:
- Fixing kernel coding style issues detected using '--strict' flag.
- Updating the device binding documentation to add support for BlueField-2 SoCs.v4->v5:
- Fixing device driver bug.v3->v4:
- Review of the device binding documentation to fix format issue and miscellaneous cleanup.v2->v3:
- Various device driver changes and bug fixes.
- Updating the device property in the device binding documentation and file format review.v1->v2:
- Various device driver changes and bug fixes.
- Cleanup of the device binding documentation.
Khalil Blaiech (2):
i2c: i2c-mlxbf: I2C SMBus driver for Mellanox BlueField SoC
dt-bindings: i2c: I2C binding for Mellanox BlueField SoC
.../devicetree/bindings/i2c/mellanox,i2c-mlxbf.txt | 42 + MAINTAINERS | 6 + drivers/i2c/busses/Kconfig | 13 + drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-mlxbf.c | 2507 ++++++++++++++++++++ 5 files changed, 2569 insertions(+) create mode 100644 Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.txt create mode 100644 drivers/i2c/busses/i2c-mlxbf.c
Signature · 1 line
2.1.2
Khalil Blaiech
maintainerPATCH RESEND v9 1/2 i2c: i2c-mlxbf: I2C SMBus driver for Mellanox BlueField SoC
From: Khalil Blaiech <[email protected]>
Add BlueField I2C driver to offer master and slave support for Mellanox BlueField SoCs. The driver implements an SMBus adapter and interfaces to multiple busses that can be probed using both ACPI and Device Tree infrastructures.
The driver supports several SMBus operations to transfer data back and forth from/to various I2C devices. It is mainly intended to be consumed by userspace tools and utilities, such as i2c-tools and decode-dimms to collect memory module information.
On the other hand, the driver has a slave function to support, among others, an IPMB interface that requires both master and slave functions to handle transfers between the BlueField SoC and a board management controllers (e.g., BMC).
---v8->v9:
- Replacing devm_ioremap_nocache and ioremap_nocache with devm_ioremap since the non-cached interface has been removed.v7->v8:
- Removing 'COMPILE_TEST' dependency in Kconfig.
- Fixing switch statement fallthrough comment to prevent warnings and/or build errors.v6->v7:
- Fixing kernel coding style issues.
- Rewording of the commit message.
- Renaming of the driver filename.
- Renaming of the macro, struture, variable and function names to be consistent with the module name.
- Removing 'MELLANOX_PLATFORM' dependency in Kconfig.
- Fixing bug in mlxbf_i2c_get_shared_resource() to prevent null pointer dereference.
- Fixing bug in mlxbf_i2c_release_gpio() to prevent the use of null pointers.
- Adding an entry to MAINTAINERS file.v5->v6:
- Fixing kernel coding style issues detected using '--strict' flag.
- Updating SPDX identifier and module license.v4->v5:
- Fixing bug in mlx_slave_enale routine.v2->v3:
- Updating the "compatible" string and add a new entry to the mlx_i2c_dt_ids array.
- Adding a new entry to the mlx_i2c_acpi_ids array to support a new device _HID.
- Updating the device probe routines to derive the device type based on the instance property described in either devicetree or ACPI.
- Definition of new handlers to request and release the shared resources. These handlers relies on the device type.v1->v2:
- Updating the '.compatible' field of of_device_id.
- Updating mlx_i2c_of_probe() call to extract the bus identifier from the pre-defined aliases.
- Removing the 'profile' property.
- Setting the timing parameters according to the value of 'clock-frequency' property.
- Convertng the timing configuration from KHz to Hz.
--- MAINTAINERS | 6 + drivers/i2c/busses/Kconfig | 13 + drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-mlxbf.c | 2507 ++++++++++++++++++++++++++++++++++++++++ 4 files changed, 2527 insertions(+) create mode 100644 drivers/i2c/busses/i2c-mlxbf.c
MAINTAINERS +6 -0
@@ -11096,6 +11096,12 @@ W: http://www.melfas.com F: Documentation/devicetree/bindings/input/touchscreen/melfas_mip4.txt F: drivers/input/touchscreen/melfas_mip4.c +MELLANOX BLUEFIELD I2C DRIVER +M: Khalil Blaiech <[email protected]> +L: [email protected] +S: Supported +F: drivers/i2c/busses/i2c-mlxbf.c + MELLANOX ETHERNET DRIVER (mlx4_en) M: Tariq Toukan <[email protected]> L: [email protected]
drivers/i2c/busses/Kconfig +13 -0
@@ -730,6 +730,19 @@ config I2C_LPC2K This driver can also be built as a module. If so, the module will be called i2c-lpc2k. +config I2C_MLXBF + tristate "Mellanox BlueField I2C controller" + depends on ARM64 + help + Enabling this option will add I2C SMBus support for Mellanox BlueField + system. + + This driver can also be built as a module. If so, the module will be + called i2c-mlxbf. + + This driver implements an I2C SMBus host controller and enables both + master and slave functions. + config I2C_MESON tristate "Amlogic Meson I2C controller" depends on ARCH_MESON || COMPILE_TEST
drivers/i2c/busses/Makefile +1 -0
@@ -140,6 +140,7 @@ obj-$(CONFIG_I2C_BRCMSTB) += i2c-brcmstb.o obj-$(CONFIG_I2C_CROS_EC_TUNNEL) += i2c-cros-ec-tunnel.o obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o obj-$(CONFIG_I2C_ICY) += i2c-icy.o +obj-$(CONFIG_I2C_MLXBF) += i2c-mlxbf.o obj-$(CONFIG_I2C_MLXCPLD) += i2c-mlxcpld.o obj-$(CONFIG_I2C_OPAL) += i2c-opal.o obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o
drivers/i2c/busses/i2c-mlxbf.c new file +2507 -0
2,507 lines not on this page · raw message
Signature · 1 line
2.1.2
kernel test robot
build botRe: [RESEND PATCH v9 1/2] i2c: i2c-mlxbf: I2C SMBus driver for Mellanox BlueField SoC
I love your patch! Perhaps something to improve:
Hi Khalil,
I love your patch! Perhaps something to improve:
[auto build test WARNING on wsa/i2c/for-next]
[also build test WARNING on robh/for-next linus/master v5.9-rc5 next-20200916] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Khalil-Blaiech/i2c-add-driver-for-Mellanox-BlueField-SoC/20200917-024300 base: https://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git i2c/for-next config: arm64-allyesconfig (attached as .config) compiler: aarch64-linux-gcc (GCC) 9.3.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=arm64
If you fix the issue, kindly add following tag as appropriate
All warnings (new ones prefixed by >>):
drivers/i2c/busses/i2c-mlxbf.c: In function 'mlxbf_slave_enable':
>> drivers/i2c/busses/i2c-mlxbf.c:1571:7: warning: variable 'exist' set but not used [-Wunused-but-set-variable]
1571 | bool exist, avail, disabled;
| ^~~~~# https://github.com/0day-ci/linux/commit/6ba51d0c1d85db9937ab994fa454b0a06f98617c
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Khalil-Blaiech/i2c-add-driver-for-Mellanox-BlueField-SoC/20200917-024300 git checkout 6ba51d0c1d85db9937ab994fa454b0a06f98617c
vim +/exist +1571 drivers/i2c/busses/i2c-mlxbf.c
1566
1567 static int mlxbf_slave_enable(struct mlxbf_i2c_priv *priv, u8 addr)
1568 {
1569 u32 slave_reg, slave_reg_tmp, slave_reg_avail, slave_addr_mask;
1570 u8 reg, reg_cnt, byte, addr_tmp, reg_avail, byte_avail;
> 1571 bool exist, avail, disabled;
1572
1573 disabled = false;
1574 exist = false;
1575 avail = false;
1576
1577 if (!priv)
1578 return -EPERM;
1579
1580 reg_cnt = MLXBF_I2C_SMBUS_SLAVE_ADDR_CNT >> 2;
1581 slave_addr_mask = MLXBF_I2C_SMBUS_SLAVE_ADDR_MASK;
1582
1583 /*
1584 * Read the slave registers. There are 4 * 32-bit slave registers.
1585 * Each slave register can hold up to 4 * 8-bit slave configuration
1586 * (7-bit address, 1 status bit (1 if enabled, 0 if not)).
1587 */
1588 for (reg = 0; reg < reg_cnt; reg++) {
1589 slave_reg = mlxbf_i2c_read(priv->smbus->io,
1590 MLXBF_I2C_SMBUS_SLAVE_ADDR_CFG + reg * 0x4);
1591 /*
1592 * Each register holds 4 slave addresses. So, we have to keep
1593 * the byte order consistent with the value read in order to
1594 * update the register correctly, if needed.
1595 */
1596 slave_reg_tmp = slave_reg;
1597 for (byte = 0; byte < 4; byte++) {
1598 addr_tmp = slave_reg_tmp & GENMASK(7, 0);
1599
1600 /*
1601 * Mark the first available slave address slot, i.e. its
1602 * enabled bit should be unset. This slot might be used
1603 * later on to register our slave.
1604 */
1605 if (!avail && !MLXBF_I2C_SLAVE_ADDR_ENABLED(addr_tmp)) {
1606 avail = true;
1607 reg_avail = reg;
1608 byte_avail = byte;
1609 slave_reg_avail = slave_reg;
1610 }
1611
1612 /*
1613 * Parse slave address bytes and check whether the
1614 * slave address already exists and it's enabled,
1615 * i.e. most significant bit is set.
1616 */
1617 if ((addr_tmp & slave_addr_mask) == addr) {
1618 if (MLXBF_I2C_SLAVE_ADDR_ENABLED(addr_tmp))
1619 return 0;
1620 disabled = true;
1621 break;
1622 }
1623
1624 /* Parse next byte. */
1625 slave_reg_tmp >>= 8;
1626 }
1627
1628 /* Exit the loop if the slave address is found. */
1629 if (disabled)
1630 break;
1631 }
1632
1633 if (!avail && !disabled)
1634 return -EINVAL; /* No room for a new slave address. */
1635
1636 if (avail && !disabled) {
1637 reg = reg_avail;
1638 byte = byte_avail;
1639 /* Set the slave address. */
1640 slave_reg_avail &= ~(slave_addr_mask << (byte * 8));
1641 slave_reg_avail |= addr << (byte * 8);
1642 slave_reg = slave_reg_avail;
1643 }
1644
1645 /* Enable the slave address and update the register. */
1646 slave_reg |= (1 << MLXBF_I2C_SMBUS_SLAVE_ADDR_EN_BIT) << (byte * 8);
1647 mlxbf_i2c_write(priv->smbus->io,
1648 MLXBF_I2C_SMBUS_SLAVE_ADDR_CFG + reg * 0x4, slave_reg);
1649
1650 return 0;
1651 }
1652
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org
Khalil Blaiech
maintainerPATCH RESEND v9 2/2 dt-bindings: i2c: I2C binding for Mellanox BlueField SoC
In reply to Khalil BlaiechFrom: Khalil Blaiech <[email protected]>
Add device tree bindings documentation for Mellanox BlueField I2C SMBus controller.
---v5->v6:
- Adding description of an extra resource to be consistent with new BlueField-2 SoCs.
- Adding an additional example of device instance.v3->v4:
- Re-ordering of the property descriptions.
- Removing useless register addresses from the resource description.
- Definition of default clock-frequency value.
- Fixing format issues; removing spaces.
- Removing "aliases" from Example section.
- Renaming device instance node in Example section.v2->v3:
- Removing shared resources from the controller instance.
- Updating the 'compatible' property and support the second generation of the Mellanox BlueField SoC.
- Fixing file format; replacing spaces with tabs.v1->v2:
- Enumeration of the device resources.
- Updating the 'compatible' property to make it less generic.
- Removing the 'bus' index property and replace it with standard approach to read the bus identifier.
- Getting rid of the 'profile' property.
- Using 'clock-frequency' property instead of 'bus-freq'.
- Convertion of the clock frequency from KHz to Hz.
- Removing useless examples.
--- .../devicetree/bindings/i2c/mellanox,i2c-mlxbf.txt | 42 ++++++++++++++++++++++ 1 file changed, 42 insertions(+) create mode 100644 Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.txt
Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.txt new file +42 -0
@@ -0,0 +1,42 @@ +Device tree configuration for the Mellanox I2C SMBus on BlueField SoCs + +Required Properties: + +- compatible : should be "mellanox,i2c-mlxbf1" or "mellanox,i2c-mlxbf2". + +- reg : address offset and length of the device registers. The + registers consist of the following set of resources: + 1) Smbus block registers. + 2) Cause master registers. + 3) Cause slave registers. + 4) Cause coalesce registers (if compatible isn't set + to "mellanox,i2c-mlxbf1"). + +- interrupts : interrupt number. + +Optional Properties: + +- clock-frequency : bus frequency used to configure timing registers; + allowed values are 100000, 400000 and 1000000; + those are expressed in Hz. Default is 100000. + +Example: + +i2c@2804000 { + compatible = "mellanox,i2c-mlxbf1"; + reg = <0x02804000 0x800>, + <0x02801200 0x020>, + <0x02801260 0x020>; + interrupts = <57>; + clock-frequency = <100000>; +}; + +i2c@2808800 { + compatible = "mellanox,i2c-mlxbf2"; + reg = <0x02808800 0x600>, + <0x02808e00 0x020>, + <0x02808e20 0x020>, + <0x02808e40 0x010>; + interrupts = <57>; + clock-frequency = <400000>; +};
Signature · 1 line
2.1.2