Add a tool for configuration of DCB
Subsystems (4)
v4 cover Add a tool for configuration of DCB
The Linux DCB interface allows configuration of a broad range of hardware-specific attributes, such as TC scheduling, flow control, per-port buffer configuration, TC rate, etc.
Currently a common libre tool for configuration of DCB is OpenLLDP. This suite contains a daemon that uses Linux DCB interface to configure HW according to the DCB TLVs exchanged over an interface. The daemon can also be controlled by a client, through which the user can adjust and view the configuration. The downside of using OpenLLDP is that it is somewhat heavyweight and difficult to use in scripts, and does not support extensions such as buffer and rate commands.
For access to many HW features, one would be perfectly fine with a fire-and-forget tool along the lines of "ip" or "tc". For scripting in particular, this would be ideal. This author is aware of one such tool, mlnx_qos from Mellanox OFED scripts collection[1].
The downside here is that the tool is very verbose, the command line language is awkward to use, it is not packaged in Linux distros, and generally has the appearance of a very vendor-specific tool, despite not being one.
This patchset addresses the above issues by providing a seed of a clean, well-documented, easily usable, extensible fire-and-forget tool for DCB configuration:
# dcb ets set dev eni1np1 \
tc-tsa all:strict 0:ets 1:ets 2:ets \
tc-bw all:0 0:33 1:33 2:34 # dcb ets show dev eni1np1 tc-tsa tc-bw
tc-tsa 0:ets 1:ets 2:ets 3:strict 4:strict 5:strict 6:strict 7:strict
tc-bw 0:33 1:33 2:34 3:0 4:0 5:0 6:0 7:0# dcb ets set dev eni1np1 tc-bw 1:30 2:37
# dcb -j ets show dev eni1np1 | jq '.tc_bw[2]'
37The patchset proceeds as follows:
- Many tools in iproute2 have an option to work in batch mode, where the commands to run are given in a file. The code to handle batching is largely the same independent of the tool in question. In patch #1, add a helper to handle the batching, and migrate individual tools to use it.
- A number of configuration options come in a form of an on-off switch. This in turn can be considered a special case of parsing one of a given set of strings. In patch #2, extract helpers to parse one of a number of strings, on top of which build an on-off parser.
Currently each tool open-codes the logic to parse the on-off toggle. A future patch set will migrate instances of this code over to the new helpers.
- The on/off toggles from previous list item sometimes need to be dumped. While in the FP output, one typically wishes to maintain consistency with the command line and show actual strings, "on" and "off", in JSON output one would rather use booleans. This logic is somewhat annoying to have to open-code time and again. Therefore in patch #3, add a helper to do just that.
- The DCB tool is built on top of libmnl. Several routines will be basically the same in DCB as they are currently in devlink. In patches #4-#6, extract them to a new module, mnl_utils, for easy reuse.
- Much of DCB is built around arrays. A syntax similar to the iplink_vlan's ingress-qos-map / egress-qos-map is very handy for describing changes done to such arrays. Therefore in patch #7, extract a helper, parse_mapping(), which manages parsing of key-value arrays. In patch #8, fix a buglet in the helper, and in patch #9, extend it to allow setting of all array elements in one go.
- In patch #10, add a skeleton of "dcb", which contains common helpers and dispatches to subtools for handling of individual objects. The skeleton is empty as of this patch.
In patch #11, add "dcb_ets", a module for handling of specifically DCB ETS objects.
The intention is to gradually add handlers for at least PFC, APP, peer configuration, buffers and rates.
[1] https://github.com/Mellanox/mlnx-tools/tree/master/ofed_scripts
v4:
- Patch #10:
- Drop all the FILE* arguments that were passed around unnecessarily
- Change dcb_parse_mapping() to make it more general
- Rename dcb_print_array_num() to dcb_print_array_u8()
- Patch #11:
- Drop all the FILE* arguments that were passed around unnecessarily
- Emit ets-cap in FP as "ets-cap", not "ets_cap"
v3:
- Patch #2:
- Have parse_on_off() return a boolean. [David Ahern]
- Patch #3:
- Rename to print_on_off(). [David Ahern]
- Move over to json_print.c and make it a variant of print_bool(). Convert RDMA tool over to print_on_off(). [Leon Romanovsky]
- Patch #10:
- Fix help output to show the arguments as they are, so -p and --pretty, not -[p]retty, which is inaccurate.
- Patch #11:
- Formatting tweaks in the man page
v2:
- A new function, print_on_off_bool(), has been introduced for showing on-off toggles in both FP and JSON modes.
[Jakub Kicinski, Stephen Hemminger]
- This prompted refactoring in several existing files, and pushed the number of patches in the set too high. The cleanup patches have therefore been moved out to another patchset, which will follow after this one.
- When dumping JSON, format keys so that they are valid jq identifiers. E.g. "tc_tsa" instead of "tc-tsa". Additionally, do not dump arrays as objects with string indices, but as true arrays. This allows for more natural access to individual items, e.g.:
# dcb ets -j show dev eth0 | jq '.tc_tsa[3]'
Instead of:
# dcb ets -j show dev eth0 | jq '.["tc-tsa"]["3"]'- Patch #4:
- Add SPDX-License-Identifier
- Patch #7:
- In parse_qos_mapping(), propagate return value from addattr_l() [Roman Mashak]
Petr Machata (11):
Unify batch processing across tools
lib: Add parse_one_of(), parse_on_off()
lib: json_print: Add print_on_off()
lib: Extract from devlink/mnlg a helper, mnlu_socket_open()
lib: Extract from devlink/mnlg a helper, mnlu_msg_prepare()
lib: Extract from devlink/mnlg a helper, mnlu_socket_recv_run()
lib: Extract from iplink_vlan a helper to parse key:value arrays
lib: parse_mapping: Update argc, argv on error
lib: parse_mapping: Recognize a keyword "all"
Add skeleton of a new tool, dcb
dcb: Add a subtool for the DCB ETS object
Makefile | 2 +- bridge/bridge.c | 38 +--- dcb/Makefile | 24 +++ dcb/dcb.c | 416 +++++++++++++++++++++++++++++++++++++++++ dcb/dcb.h | 43 +++++ dcb/dcb_ets.c | 435 +++++++++++++++++++++++++++++++++++++++++++ devlink/Makefile | 2 +- devlink/devlink.c | 41 +--- devlink/mnlg.c | 93 ++------- include/json_print.h | 1 + include/mnl_utils.h | 11 ++ include/utils.h | 11 ++ ip/ip.c | 46 +---- ip/iplink_vlan.c | 36 ++-- ip/ipmacsec.c | 52 ++---- lib/Makefile | 2 +- lib/json_print.c | 34 +++- lib/mnl_utils.c | 110 +++++++++++ lib/utils.c | 103 ++++++++++ man/man8/dcb-ets.8 | 185 ++++++++++++++++++ man/man8/dcb.8 | 114 ++++++++++++ rdma/dev.c | 2 +- rdma/rdma.c | 38 +--- rdma/rdma.h | 1 - rdma/res-cq.c | 2 +- rdma/utils.c | 5 - tc/tc.c | 38 +--- 27 files changed, 1561 insertions(+), 324 deletions(-) create mode 100644 dcb/Makefile create mode 100644 dcb/dcb.c create mode 100644 dcb/dcb.h create mode 100644 dcb/dcb_ets.c create mode 100644 include/mnl_utils.h create mode 100644 lib/mnl_utils.c create mode 100644 man/man8/dcb-ets.8 create mode 100644 man/man8/dcb.8
Signature · 1 line
2.25.1
PATCH v4 1/11 Unify batch processing across tools
The code for handling batches is largely the same across iproute2 tools. Extract a helper to handle the batch, and adjust the tools to dispatch to this helper. Sandwitch the invocation between prologue / epilogue code specific for each tool.
--- bridge/bridge.c | 38 +++++++------------------------------- devlink/devlink.c | 41 +++++++---------------------------------- include/utils.h | 3 +++ ip/ip.c | 46 ++++++++++------------------------------------ lib/utils.c | 40 ++++++++++++++++++++++++++++++++++++++++ rdma/rdma.c | 38 +++++++------------------------------- tc/tc.c | 38 +++++++------------------------------- 7 files changed, 81 insertions(+), 163 deletions(-)
bridge/bridge.c +7 -31
@@ -77,20 +77,14 @@ static int do_cmd(const char *argv0, int argc, char **argv)return -1 ; } -static int batch (const char *name) +static int br_batch_cmd (int argc,char *argv[],void *data) { -char *line =NULL ; -size_t len =0 ; -int ret =EXIT_SUCCESS ; +return do_cmd (argv[0 ], argc, argv); +} -if (name &&strcmp (name,"-" ) !=0 ) { -if (freopen (name,"r" , stdin) ==NULL ) { -fprintf (stderr, -"Cannot open file \"%s\" for reading: %s\n" , - name,strerror (errno)); -return EXIT_FAILURE ; - } - } +static int batch (const char *name) +{ +int ret;if (rtnl_open (&rth,0 ) <0 ) {fprintf (stderr,"Cannot open rtnetlink\n" );
@@ -99,25 +93,7 @@ static int batch(const char *name)rtnl_set_strict_dump (&rth); - cmdlineno =0 ; -while (getcmdline (&line, &len, stdin) !=-1 ) { -char *largv[100 ]; -int largc; - - largc =makeargs (line, largv,100 ); -if (largc ==0 ) -continue ;/* blank line */ - -if (do_cmd (largv[0 ], largc, largv)) { -fprintf (stderr,"Command failed %s:%d\n" , - name, cmdlineno); - ret =EXIT_FAILURE ; -if (!force) -break ; - } - } -if (line) -free (line); + ret =do_batch (name, force, br_batch_cmd,NULL );rtnl_close (&rth);return ret;
devlink/devlink.c +7 -34
50 lines not on this page · raw message
include/utils.h +3 -0
@@ -322,4 +322,7 @@ int get_time64(__s64 *time, const char *str);char *sprint_time (__u32 time,char *buf);char *sprint_time64 (__s64 time,char *buf); +int do_batch (const char *name,bool force, +int (*cmd)(int argc,char *argv[],void *user),void *user); +#endif /* __UTILS_H__ */
ip/ip.c +10 -36
66 lines not on this page · raw message
lib/utils.c +40 -0
@@ -1695,3 +1695,43 @@ char *sprint_time64(__s64 time, char *buf)print_time64 (buf,SPRINT_BSIZE -1 , time);return buf; } + +int do_batch (const char *name,bool force, +int (*cmd)(int argc,char *argv[],void *data),void *data) +{ +char *line =NULL ; +size_t len =0 ; +int ret =EXIT_SUCCESS ; + +if (name &&strcmp (name,"-" ) !=0 ) { +if (freopen (name,"r" , stdin) ==NULL ) { +fprintf (stderr, +"Cannot open file \"%s\" for reading: %s\n" , + name,strerror (errno)); +return EXIT_FAILURE ; + } + } + + cmdlineno =0 ; +while (getcmdline (&line, &len, stdin) !=-1 ) { +char *largv[100 ]; +int largc; + + largc =makeargs (line, largv,100 ); +if (!largc) +continue ;/* blank line */ + +if (cmd (largc, largv, data)) { +fprintf (stderr,"Command failed %s:%d\n" , + name, cmdlineno); + ret =EXIT_FAILURE ; +if (!force) +break ; + } + } + +if (line) +free (line); + +return ret; +}
rdma/rdma.c +7 -31
@@ -41,40 +41,16 @@ static int rd_cmd(struct rd *rd, int argc, char **argv)return rd_exec_cmd (rd, cmds,"object" ); } -static int rd_batch (struct rd *rd,const char *name,bool force) +static int rd_batch_cmd (int argc,char *argv[],void *data) { -char *line =NULL ; -size_t len =0 ; -int ret =0 ; - -if (name &&strcmp (name,"-" ) !=0 ) { -if (!freopen (name,"r" , stdin)) { -pr_err ("Cannot open file \"%s\" for reading: %s\n" , - name,strerror (errno)); -return errno; - } - } +struct rd *rd = data; - cmdlineno =0 ; -while (getcmdline (&line, &len, stdin) !=-1 ) { -char *largv[512 ]; -int largc; - - largc =makeargs (line, largv,ARRAY_SIZE (largv)); -if (!largc) -continue ;/* blank line */ - - ret =rd_cmd (rd, largc, largv); -if (ret) { -pr_err ("Command failed %s:%d\n" , name, cmdlineno); -if (!force) -break ; - } - } - -free (line); +return rd_cmd (rd, argc, argv); +} -return ret; +static int rd_batch (struct rd *rd,const char *name,bool force) +{ +return do_batch (name, force, rd_batch_cmd, rd); }static int rd_init (struct rd *rd,char *filename)
tc/tc.c +7 -31
@@ -231,22 +231,16 @@ static int do_cmd(int argc, char **argv)return -1 ; } +static int tc_batch_cmd (int argc,char *argv[],void *data) +{ +return do_cmd (argc, argv); +} +static int batch (const char *name) { -char *line =NULL ; -size_t len =0 ; -int ret =0 ; +int ret; batch_mode =1 ; -if (name &&strcmp (name,"-" ) !=0 ) { -if (freopen (name,"r" , stdin) ==NULL ) { -fprintf (stderr, -"Cannot open file \"%s\" for reading: %s\n" , - name,strerror (errno)); -return -1 ; - } - } -tc_core_init ();if (rtnl_open (&rth,0 ) <0 ) {
@@ -254,26 +248,8 @@ static int batch(const char *name)return -1 ; } - cmdlineno =0 ; -while (getcmdline (&line, &len, stdin) !=-1 ) { -char *largv[100 ]; -int largc; - - largc =makeargs (line, largv,100 ); -if (largc ==0 ) -continue ;/* blank line */ - -if (do_cmd (largc, largv)) { -fprintf (stderr,"Command failed %s:%d\n" , - name, cmdlineno); - ret =1 ; -if (!force) -break ; - } -fflush (stdout); - } + ret =do_batch (name, force, tc_batch_cmd,NULL ); -free (line);rtnl_close (&rth);return ret; }
Signature · 1 line
2.25.1
PATCH v4 2/11 lib: Add parse_one_of(), parse_on_off()
In reply to Petr MachataTake from the macsec code parse_one_of() and adapt so that it passes the primary result as the main return value, and error result through a pointer. That is the simplest way to make the code reusable across data types without introducing extra magic.
Also from macsec take the specialization of parse_one_of() for parsing specifically the strings "off" and "on".
Convert the macsec code to the new helpers.
---
Notes:
v3:
- Have parse_on_off() return a boolean. [David Ahern]
include/utils.h | 4 ++++ ip/ipmacsec.c | 52 +++++++++++-------------------------------------- lib/utils.c | 28 ++++++++++++++++++++++++++ 3 files changed, 43 insertions(+), 41 deletions(-)
include/utils.h +4 -0
@@ -325,4 +325,8 @@ char *sprint_time64(__s64 time, char *buf);int do_batch (const char *name,bool force,int (*cmd)(int argc,char *argv[],void *user),void *user); +int parse_one_of (const char *msg,const char *realval,const char *const *list, +size_t len,int *p_err); +bool parse_on_off (const char *msg,const char *realval,int *p_err); +#endif /* __UTILS_H__ */
ip/ipmacsec.c +11 -41
118 lines not on this page · raw message
lib/utils.c +28 -0
@@ -1735,3 +1735,31 @@ int do_batch(const char *name, bool force,return ret; } + +int parse_one_of (const char *msg,const char *realval,const char *const *list, +size_t len,int *p_err) +{ +int i; + +for (i =0 ; i < len; i++) { +if (list[i] &&matches (realval, list[i]) ==0 ) { + *p_err =0 ; +return i; + } + } + +fprintf (stderr,"Error: argument of \"%s\" must be one of " , msg); +for (i =0 ; i < len; i++) +if (list[i]) +fprintf (stderr,"\"%s\", " , list[i]); +fprintf (stderr,"not \"%s\"\n" , realval); + *p_err = -EINVAL ; +return 0 ; +} + +bool parse_on_off (const char *msg,const char *realval,int *p_err) +{ +static const char *const values_on_off[] = {"off" ,"on" }; + +return parse_one_of (msg, realval, values_on_off,ARRAY_SIZE (values_on_off), p_err); +}
Signature · 1 line
2.25.1
PATCH v4 3/11 lib: json_print: Add print_on_off()
In reply to Petr MachataThe value of a number of booleans is shown as "on" and "off" in the plain output, and as an actual boolean in JSON mode. Add a function that does that.
RDMA tool already uses a function named print_on_off(). This function always shows "on" and "off", even in JSON mode. Since there are probably very few if any consumers of this interface at this point, migrate it to the new central print_on_off() as well.
---
Notes:
v3:
- Rename to print_on_off(). [David Ahern]
- Move over to json_print.c and make it a variant of print_bool(). Convert RDMA tool over to print_on_off(). [Leon Romanovsky]
include/json_print.h | 1 + lib/json_print.c | 34 +++++++++++++++++++++++++++------- rdma/dev.c | 2 +- rdma/rdma.h | 1 - rdma/res-cq.c | 2 +- rdma/utils.c | 5 ----- 6 files changed, 30 insertions(+), 15 deletions(-)
include/json_print.h +1 -0
@@ -65,6 +65,7 @@ void print_nl(void); _PRINT_FUNC(int, int) _PRINT_FUNC(s64, int64_t) _PRINT_FUNC(bool, bool) +_PRINT_FUNC(on_off, bool) _PRINT_FUNC(null, const char*) _PRINT_FUNC(string, const char*) _PRINT_FUNC(uint, unsigned int)
lib/json_print.c +27 -7
@@ -191,11 +191,12 @@ int print_color_string(enum output_type type,* a value to it, you will need to use "is_json_context()" to have different * branch for json and regular output. grep -r "print_bool" for example */ -int print_color_bool (enum output_type type, -enum color_attr color, -const char *key, -const char *fmt, -bool value) +static int __print_color_bool (enum output_type type, +enum color_attr color, +const char *key, +const char *fmt, +bool value, +const char *str) {int ret =0 ;
@@ -205,13 +206,32 @@ int print_color_bool(enum output_type type,else jsonw_bool (_jw, value); }else if (_IS_FP_CONTEXT (type)) { - ret =color_fprintf (stdout, color, fmt, - value ?"true" :"false" ); + ret =color_fprintf (stdout, color, fmt, str); }return ret; } +int print_color_bool (enum output_type type, +enum color_attr color, +const char *key, +const char *fmt, +bool value) +{ +return __print_color_bool (type, color, key, fmt, value, + value ?"true" :"false" ); +} + +int print_color_on_off (enum output_type type, +enum color_attr color, +const char *key, +const char *fmt, +bool value) +{ +return __print_color_bool (type, color, key, fmt, value, + value ?"on" :"off" ); +} +/* * In JSON context uses hardcode %#x format: 42 -> 0x2a */
rdma/dev.c +1 -1
@@ -159,7 +159,7 @@ static void dev_print_dim_setting(struct rd *rd, struct nlattr **tb)if (dim_setting >1 )return ; -print_on_off (rd,"adaptive-moderation" , dim_setting); +print_on_off (PRINT_ANY ,"adaptive-moderation" ,"adaptive-moderation %s " , dim_setting); }
rdma/rdma.h +0 -1
@@ -138,7 +138,6 @@ void print_driver_table(struct rd *rd, struct nlattr *tb);void print_raw_data (struct rd *rd,struct nlattr **nla_line);void newline (struct rd *rd);void newline_indent (struct rd *rd); -void print_on_off (struct rd *rd,const char *key_str,bool on);void print_raw_data (struct rd *rd,struct nlattr **nla_line);#define MAX_LINE_LENGTH 80
rdma/res-cq.c +1 -1
@@ -36,7 +36,7 @@ static void print_cq_dim_setting(struct rd *rd, struct nlattr *attr)if (dim_setting >1 )return ; -print_on_off (rd,"adaptive-moderation" , dim_setting); +print_on_off (PRINT_ANY ,"adaptive-moderation" ,"adaptive-moderation %s " , dim_setting); } static int res_cq_line_raw(struct rd *rd, const char *name, int idx,
rdma/utils.c +0 -5
@@ -781,11 +781,6 @@ static int print_driver_string(struct rd *rd, const char *key_str,return 0 ; } -void print_on_off (struct rd *rd,const char *key_str,bool on) -{ -print_driver_string (rd, key_str, (on) ?"on" :"off" ); -} -static int print_driver_s32 (struct rd *rd,const char *key_str,int32_t val,enum rdma_nldev_print_type print_type) {
Signature · 1 line
2.25.1
Re: [PATCH iproute2-next v4 03/11] lib: json_print: Add print_on_off()
Quoted 11 lines · Petr Machata
The value of a number of booleans is shown as "on" and "off" in the plain output, and as an actual boolean in JSON mode. Add a function that does that.
RDMA tool already uses a function named
print_on_off(). This function always shows "on" and "off", even in JSON mode. Since there are probably very few if any consumers of this interface at this point, migrate it to the new centralprint_on_off()as well.Signed-off-by Petr Machata <[email protected]>---
Thanks,
Re: [PATCH iproute2-next v4 03/11] lib: json_print: Add print_on_off()
In reply to Petr MachataQuoted 18 lines · Petr Machata
The value of a number of booleans is shown as "on" and "off" in the plain output, and as an actual boolean in JSON mode. Add a function that does that.
RDMA tool already uses a function named
print_on_off(). This function always shows "on" and "off", even in JSON mode. Since there are probably very few if any consumers of this interface at this point, migrate it to the new centralprint_on_off()as well.Signed-off-by Petr Machata <[email protected]>---
Notes:
v3:
- Rename toprint_on_off(). [David Ahern]
- Move over tojson_print.cand make it a variant ofprint_bool(). Convert RDMA tool over toprint_on_off(). [Leon Romanovsky]
Quoted 8 lines
include/json_print.h | 1 + lib/json_print.c | 34 +++++++++++++++++++++++++++------- rdma/dev.c | 2 +- rdma/rdma.h | 1 - rdma/res-cq.c | 2 +- rdma/utils.c | 5 ----- 6 files changed, 30 insertions(+), 15 deletions(-)
Thanks,
PATCH v4 4/11 lib: Extract from devlink/mnlg a helper, mnlu_socket_open()
In reply to Petr MachataThis little dance of mnl_socket_open(), option setting, and bind, is the same regardless of tool. Extract into a new module that should hold helpers for working with libmnl, mnl_util.c.
---
Notes:
v2:
- Add SPDX-License-Identifier
devlink/Makefile | 2 +- devlink/mnlg.c | 19 ++++--------------- include/mnl_utils.h | 7 +++++++ lib/Makefile | 2 +- lib/mnl_utils.c | 30 ++++++++++++++++++++++++++++++ 5 files changed, 43 insertions(+), 17 deletions(-) create mode 100644 include/mnl_utils.h create mode 100644 lib/mnl_utils.c
devlink/Makefile +1 -1
@@ -12,7 +12,7 @@ endif all: $(TARGETS) $(LIBS) -devlink: $(DEVLINKOBJ) +devlink: $(DEVLINKOBJ) $(LIBNETLINK) $(QUIET_LINK)$(CC) $^ $(LDFLAGS) $(LDLIBS) -o $@ install: all
devlink/mnlg.c +4 -15
@@ -19,6 +19,7 @@#include <linux/genetlink.h> #include "libnetlink.h" +#include "mnl_utils.h" #include "utils.h" #include "mnlg.h"
@@ -263,7 +264,6 @@ struct mnlg_socket *mnlg_socket_open(const char *family_name, uint8_t version) {struct mnlg_socket *nlg;struct nlmsghdr *nlh; -int one =1 ;int err; nlg =malloc (sizeof (*nlg));
@@ -274,19 +274,9 @@ struct mnlg_socket *mnlg_socket_open(const char *family_name, uint8_t version)if (!nlg->buf) goto err_buf_alloc; - nlg->nl =mnl_socket_open (NETLINK_GENERIC ); + nlg->nl =mnlu_socket_open (NETLINK_GENERIC );if (!nlg->nl) - goto err_mnl_socket_open; - -/* Older kernels may no support capped/extended ACK reporting */ -mnl_socket_setsockopt (nlg->nl,NETLINK_CAP_ACK , &one,sizeof (one)); -mnl_socket_setsockopt (nlg->nl,NETLINK_EXT_ACK , &one,sizeof (one)); - - err =mnl_socket_bind (nlg->nl,0 ,MNL_SOCKET_AUTOPID ); -if (err <0 ) - goto err_mnl_socket_bind; - - nlg->portid =mnl_socket_get_portid (nlg->nl); + goto err_socket_open; nlh =__mnlg_msg_prepare (nlg,CTRL_CMD_GETFAMILY ,NLM_F_REQUEST |NLM_F_ACK ,GENL_ID_CTRL ,1 );
@@ -305,9 +295,8 @@ struct mnlg_socket *mnlg_socket_open(const char *family_name, uint8_t version) err_mnlg_socket_recv_run: err_mnlg_socket_send: -err_mnl_socket_bind:mnl_socket_close (nlg->nl); -err_mnl_socket_open: +err_socket_open:free (nlg->buf); err_buf_alloc:free (nlg);
include/mnl_utils.h new file +7 -0
@@ -0,0 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __MNL_UTILS_H__ +#define __MNL_UTILS_H__ 1 + +struct mnl_socket *mnlu_socket_open (int bus); + +#endif /* __MNL_UTILS_H__ */
lib/Makefile +1 -1
@@ -7,7 +7,7 @@ UTILOBJ = utils.o rt_names.o ll_map.o ll_types.o ll_proto.o ll_addr.o \ inet_proto.o namespace.o json_writer.o json_print.o \ names.o color.o bpf.o exec.o fs.o cg_map.o -NLOBJ=libgenl.o libnetlink.o +NLOBJ=libgenl.o libnetlink.o mnl_utils.o all: libnetlink.a libutil.a
lib/mnl_utils.c new file +30 -0
@@ -0,0 +1,30 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* mnl_utils.c Helpers for working with libmnl. +*/ + +#include <libmnl/libmnl.h> + +#include "mnl_utils.h" + +struct mnl_socket *mnlu_socket_open (int bus) +{ +struct mnl_socket *nl; +int one =1 ; + + nl =mnl_socket_open (bus); +if (nl ==NULL ) +return NULL ; + +mnl_socket_setsockopt (nl,NETLINK_CAP_ACK , &one,sizeof (one)); +mnl_socket_setsockopt (nl,NETLINK_EXT_ACK , &one,sizeof (one)); + +if (mnl_socket_bind (nl,0 ,MNL_SOCKET_AUTOPID ) <0 ) + goto err_bind; + +return nl; + +err_bind: +mnl_socket_close (nl); +return NULL ; +}
Signature · 1 line
2.25.1
PATCH v4 5/11 lib: Extract from devlink/mnlg a helper, mnlu_msg_prepare()
In reply to Petr MachataAllocation of a new netlink message with the two usual headers is reusable with other netlink netlink message types. Extract it into a helper, mnlu_msg_prepare(). Take the second header as an argument, instead of passing in parameters to initialize it, and copy it in.
--- devlink/mnlg.c | 18 ++++++------------ include/mnl_utils.h | 2 ++ lib/mnl_utils.c | 19 +++++++++++++++++++ 3 files changed, 27 insertions(+), 12 deletions(-)
devlink/mnlg.c +6 -12
@@ -14,7 +14,6 @@#include <string.h> #include <errno.h> #include <unistd.h> -#include <time.h> #include <libmnl/libmnl.h> #include <linux/genetlink.h>
@@ -36,19 +35,14 @@ static struct nlmsghdr *__mnlg_msg_prepare(struct mnlg_socket *nlg, uint8_t cmd, uint16_t flags, uint32_t id, uint8_t version) { + struct genlmsghdr genl = { + .cmd = cmd, + .version = version, + };struct nlmsghdr *nlh; -struct genlmsghdr *genl; - - nlh =mnl_nlmsg_put_header (nlg->buf); - nlh->nlmsg_type = id; - nlh->nlmsg_flags = flags; - nlg->seq =time (NULL ); - nlh->nlmsg_seq = nlg->seq; - - genl =mnl_nlmsg_put_extra_header (nlh,sizeof (struct genlmsghdr )); - genl->cmd = cmd; - genl->version = version; + nlh =mnlu_msg_prepare (nlg->buf, id, flags, &genl,sizeof (genl)); + nlg->seq = nlh->nlmsg_seq;return nlh; }
include/mnl_utils.h +2 -0
@@ -3,5 +3,7 @@#define __MNL_UTILS_H__ 1struct mnl_socket *mnlu_socket_open (int bus); +struct nlmsghdr *mnlu_msg_prepare (void *buf,uint32_t nlmsg_type,uint16_t flags, +void *extra_header,size_t extra_header_size);#endif /* __MNL_UTILS_H__ */
lib/mnl_utils.c +19 -0
@@ -3,6 +3,8 @@* mnl_utils.c Helpers for working with libmnl. */ +#include <string.h> +#include <time.h> #include <libmnl/libmnl.h> #include "mnl_utils.h"
@@ -28,3 +30,20 @@ err_bind:mnl_socket_close (nl);return NULL ; } + +struct nlmsghdr *mnlu_msg_prepare (void *buf,uint32_t nlmsg_type,uint16_t flags, +void *extra_header,size_t extra_header_size) +{ +struct nlmsghdr *nlh; +void *eh; + + nlh =mnl_nlmsg_put_header (buf); + nlh->nlmsg_type = nlmsg_type; + nlh->nlmsg_flags = flags; + nlh->nlmsg_seq =time (NULL ); + + eh =mnl_nlmsg_put_extra_header (nlh, extra_header_size); +memcpy (eh, extra_header, extra_header_size); + +return nlh; +}
Signature · 1 line
2.25.1
PATCH v4 6/11 lib: Extract from devlink/mnlg a helper, mnlu_socket_recv_run()
In reply to Petr MachataReceiving a message in libmnl is a somewhat involved operation. Devlink's mnlg library has an implementation that is going to be handy for other tools as well. Extract it into a new helper.
--- devlink/mnlg.c | 56 ++--------------------------------------- include/mnl_utils.h | 2 ++ lib/mnl_utils.c | 61 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 65 insertions(+), 54 deletions(-)
devlink/mnlg.c +2 -54
@@ -28,7 +28,6 @@ struct mnlg_socket {uint32_t id;uint8_t version;unsigned int seq; -unsigned int portid; }; static struct nlmsghdr *__mnlg_msg_prepare(struct mnlg_socket *nlg, uint8_t cmd,
@@ -57,61 +56,10 @@ int mnlg_socket_send(struct mnlg_socket *nlg, const struct nlmsghdr *nlh)return mnl_socket_sendto (nlg->nl, nlh, nlh->nlmsg_len); } -static int mnlg_cb_noop (const struct nlmsghdr *nlh,void *data) -{ -return MNL_CB_OK ; -} - -static int mnlg_cb_error (const struct nlmsghdr *nlh,void *data) -{ -const struct nlmsgerr *err =mnl_nlmsg_get_payload (nlh); - -/* Netlink subsystems returns the errno value with different signess */ -if (err->error <0 ) - errno = -err->error; -else - errno = err->error; - -if (nl_dump_ext_ack (nlh,NULL )) -return MNL_CB_ERROR ; - -return err->error ==0 ?MNL_CB_STOP :MNL_CB_ERROR ; -} - -static int mnlg_cb_stop (const struct nlmsghdr *nlh,void *data) -{ -int len = *(int *)NLMSG_DATA (nlh); - -if (len <0 ) { - errno = -len; -nl_dump_ext_ack_done (nlh, len); -return MNL_CB_ERROR ; - } -return MNL_CB_STOP ; -} - -static mnl_cb_t mnlg_cb_array[NLMSG_MIN_TYPE ] = { - [NLMSG_NOOP ] = mnlg_cb_noop, - [NLMSG_ERROR ] = mnlg_cb_error, - [NLMSG_DONE ] = mnlg_cb_stop, - [NLMSG_OVERRUN ] = mnlg_cb_noop, -}; -int mnlg_socket_recv_run (struct mnlg_socket *nlg,mnl_cb_t data_cb,void *data) { -int err; - -do { - err =mnl_socket_recvfrom (nlg->nl, nlg->buf, -MNL_SOCKET_BUFFER_SIZE ); -if (err <=0 ) -break ; - err =mnl_cb_run2 (nlg->buf, err, nlg->seq, nlg->portid, - data_cb, data, mnlg_cb_array, -ARRAY_SIZE (mnlg_cb_array)); - }while (err >0 ); - -return err; +return mnlu_socket_recv_run (nlg->nl, nlg->seq, nlg->buf,MNL_SOCKET_BUFFER_SIZE , + data_cb, data); }struct group_info {
include/mnl_utils.h +2 -0
@@ -5,5 +5,7 @@struct mnl_socket *mnlu_socket_open (int bus);struct nlmsghdr *mnlu_msg_prepare (void *buf,uint32_t nlmsg_type,uint16_t flags,void *extra_header,size_t extra_header_size); +int mnlu_socket_recv_run (struct mnl_socket *nl,unsigned int seq,void *buf,size_t buf_size, +mnl_cb_t cb,void *data);#endif /* __MNL_UTILS_H__ */
lib/mnl_utils.c +61 -0
75 lines not on this page · raw message
Signature · 1 line
2.25.1
PATCH v4 7/11 lib: Extract from iplink_vlan a helper to parse key:value arrays
In reply to Petr MachataVLAN netdevices have two similar attributes: ingress-qos-map and egress-qos-map. These attributes can be configured with a series of 802.1-priority-to-skb-priority (and vice versa) mappings. A reusable helper along those lines will be handy for configuration of various priority-to-tc, tc-to-algorithm, and other arrays in DCB.
Therefore extract the logic to a function parse_mapping(), move to utils.c, and dispatch to utils.c from iplink_vlan.c. That necessitates extraction of a VLAN-specific parse_qos_mapping(). Do that, and propagate addattr_l() return value up, unlike the original.
---
Notes:
v2:
- In parse_qos_mapping(), propagate return value from addattr_l() [Roman Mashak]
include/utils.h | 4 ++++ ip/iplink_vlan.c | 36 +++++++++++++++--------------------- lib/utils.c | 28 ++++++++++++++++++++++++++++ 3 files changed, 47 insertions(+), 21 deletions(-)
include/utils.h +4 -0
@@ -329,4 +329,8 @@ int parse_one_of(const char *msg, const char *realval, const char * const *list, size_t len, int *p_err);bool parse_on_off (const char *msg,const char *realval,int *p_err); +int parse_mapping (int *argcp,char ***argvp, +int (*mapping_cb)(__u32 key,char *value,void *data), +void *mapping_cb_data); +#endif /* __UTILS_H__ */
ip/iplink_vlan.c +15 -21
@@ -49,36 +49,30 @@ static int on_off(const char *msg, const char *arg)return -1 ; } +static int parse_qos_mapping (__u32 key,char *value,void *data) +{ +struct nlmsghdr *n = data; +struct ifla_vlan_qos_mapping m = { + .from = key, + }; + +if (get_u32 (&m.to, value,0 )) +return 1 ; + +return addattr_l (n,1024 ,IFLA_VLAN_QOS_MAPPING , &m,sizeof (m)); +} +static int vlan_parse_qos_map (int *argcp,char ***argvp,struct nlmsghdr *n,int attrtype) { -int argc = *argcp; -char **argv = *argvp; -struct ifla_vlan_qos_mapping m;struct rtattr *tail; tail =addattr_nest (n,1024 , attrtype); -while (argc >0 ) { -char *colon =strchr (*argv,':' ); - -if (!colon) -break ; - *colon ='\0' ; - -if (get_u32 (&m.from, *argv,0 )) -return 1 ; -if (get_u32 (&m.to, colon +1 ,0 )) -return 1 ; - argc--, argv++; - -addattr_l (n,1024 ,IFLA_VLAN_QOS_MAPPING , &m,sizeof (m)); - } +if (parse_mapping (argcp, argvp, &parse_qos_mapping, n)) +return 1 ;addattr_nest_end (n, tail); - - *argcp = argc; - *argvp = argv;return 0 ; }
lib/utils.c +28 -0
@@ -1763,3 +1763,31 @@ bool parse_on_off(const char *msg, const char *realval, int *p_err)return parse_one_of (msg, realval, values_on_off,ARRAY_SIZE (values_on_off), p_err); } + +int parse_mapping (int *argcp,char ***argvp, +int (*mapping_cb)(__u32 key,char *value,void *data), +void *mapping_cb_data) +{ +int argc = *argcp; +char **argv = *argvp; + +while (argc >0 ) { +char *colon =strchr (*argv,':' ); +__u32 key; + +if (!colon) +break ; + *colon ='\0' ; + +if (get_u32 (&key, *argv,0 )) +return 1 ; +if (mapping_cb (key, colon +1 , mapping_cb_data)) +return 1 ; + + argc--, argv++; + } + + *argcp = argc; + *argvp = argv; +return 0 ; +}
Signature · 1 line
2.25.1
PATCH v4 8/11 lib: parse_mapping: Update argc, argv on error
In reply to Petr MachataCurrently argc and argv are not updated unless parsing of all of the mapping was successful. However in that case, "ip link" will point at the wrong argument when complaining:
# ip link add name eth0.100 link eth0 type vlan id 100 egress 1:1 2:foo
Error: argument "1" is wrong: invalid egress-qos-mapUpdate argc and argv even in the case of parsing error, so that the right element is indicated.
--- lib/utils.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-)
lib/utils.c +10 -5
@@ -1770,6 +1770,7 @@ int parse_mapping(int *argcp, char ***argvp, {int argc = *argcp;char **argv = *argvp; +int ret =0 ;while (argc >0 ) {char *colon =strchr (*argv,':' );
@@ -1779,15 +1780,19 @@ int parse_mapping(int *argcp, char ***argvp,break ; *colon ='\0' ; -if (get_u32 (&key, *argv,0 )) -return 1 ; -if (mapping_cb (key, colon +1 , mapping_cb_data)) -return 1 ; +if (get_u32 (&key, *argv,0 )) { + ret =1 ; +break ; + } +if (mapping_cb (key, colon +1 , mapping_cb_data)) { + ret =1 ; +break ; + } argc--, argv++; } *argcp = argc; *argvp = argv; -return 0 ; +return ret; }
Signature · 1 line
2.25.1
PATCH v4 9/11 lib: parse_mapping: Recognize a keyword "all"
In reply to Petr MachataThe DCB tool will have to provide an interface to a number of fixed-size arrays. Unlike the egress- and ingress-qos-map, it makes good sense to have an interface to set all members to the same value. For example to set strict priority on all TCs besides select few, or to reset allocated bandwidth to all zeroes, again besides several explicitly-given ones.
To support this usage, extend the parse_mapping() with a boolean that determines whether this special use is supported. If "all" is given and recognized, mapping_cb is called with the key of -1.
Have iplink_vlan pass false for allow_all.
--- include/utils.h | 2 +- ip/iplink_vlan.c | 2 +- lib/utils.c | 6 ++++-- 3 files changed, 6 insertions(+), 4 deletions(-)
include/utils.h +1 -1
@@ -329,7 +329,7 @@ int parse_one_of(const char *msg, const char *realval, const char * const *list, size_t len, int *p_err);bool parse_on_off (const char *msg,const char *realval,int *p_err); -int parse_mapping (int *argcp,char ***argvp, +int parse_mapping (int *argcp,char ***argvp,bool allow_all,int (*mapping_cb)(__u32 key,char *value,void *data),void *mapping_cb_data);
ip/iplink_vlan.c +1 -1
@@ -69,7 +69,7 @@ static int vlan_parse_qos_map(int *argcp, char ***argvp, struct nlmsghdr *n, tail =addattr_nest (n,1024 , attrtype); -if (parse_mapping (argcp, argvp, &parse_qos_mapping, n)) +if (parse_mapping (argcp, argvp, false, &parse_qos_mapping, n))return 1 ;addattr_nest_end (n, tail);
lib/utils.c +4 -2
@@ -1764,7 +1764,7 @@ bool parse_on_off(const char *msg, const char *realval, int *p_err)return parse_one_of (msg, realval, values_on_off,ARRAY_SIZE (values_on_off), p_err); } -int parse_mapping (int *argcp,char ***argvp, +int parse_mapping (int *argcp,char ***argvp,bool allow_all,int (*mapping_cb)(__u32 key,char *value,void *data),void *mapping_cb_data) {
@@ -1780,7 +1780,9 @@ int parse_mapping(int *argcp, char ***argvp,break ; *colon ='\0' ; -if (get_u32 (&key, *argv,0 )) { +if (allow_all &&matches (*argv,"all" ) ==0 ) { + key = (__u32) -1 ; + }else if (get_u32 (&key, *argv,0 )) { ret =1 ;break ; }
Signature · 1 line
2.25.1
PATCH v4 10/11 Add skeleton of a new tool, dcb
In reply to Petr MachataThe Linux DCB interface allows configuration of a broad range of hardware-specific attributes, such as TC scheduling, flow control, per-port buffer configuration, TC rate, etc. Add a new tool to show that configuration and tweak it.
DCB allows configuration of several objects, and possibly could expand to pre-standard CEE interfaces. Therefore the tool itself is a lean shell that dispatches to subtools each dedicated to one of the objects.
---
Notes:
v4:
- Drop all the FILE* arguments that were passed around unnecessarily
- Change dcb_parse_mapping() to make it more general
- Rename dcb_print_array_num() to dcb_print_array_u8()
- Swap around arguments to dcb_print_named_array() so that they are in sync with print_uint(), print_on_off() etc.
v3:
- Fix help output and man page to show the arguments as they are, so -p and --pretty, not -[p]retty, which is inaccurate.
Makefile | 2 +- dcb/Makefile | 24 +++ dcb/dcb.c | 414 +++++++++++++++++++++++++++++++++++++++++++++++++ dcb/dcb.h | 39 +++++ man/man8/dcb.8 | 103 ++++++++++++ 5 files changed, 581 insertions(+), 1 deletion(-) create mode 100644 dcb/Makefile create mode 100644 dcb/dcb.c create mode 100644 dcb/dcb.h create mode 100644 man/man8/dcb.8
Makefile +1 -1
@@ -55,7 +55,7 @@ WFLAGS += -Wmissing-declarations -Wold-style-definition -Wformat=2 CFLAGS := $(WFLAGS) $(CCOPTS) -I../include -I../include/uapi $(DEFINES) $(CFLAGS) YACCFLAGS = -d -t -v -SUBDIRS=lib ip tc bridge misc netem genl tipc devlink rdma man +SUBDIRS=lib ip tc bridge misc netem genl tipc devlink rdma dcb man LIBNETLINK=../lib/libutil.a ../lib/libnetlink.a LDLIBS += $(LIBNETLINK)
dcb/Makefile new file +24 -0
@@ -0,0 +1,24 @@ +# SPDX-License-Identifier: GPL-2.0 +include ../config.mk + +TARGETS := + +ifeq ($(HAVE_MNL),y) + +DCBOBJ = dcb.o +TARGETS += dcb + +endif + +all: $(TARGETS) $(LIBS) + +dcb: $(DCBOBJ) $(LIBNETLINK) + $(QUIET_LINK)$(CC) $^ $(LDFLAGS) $(LDLIBS) -o $@ + +install: all + for i in $(TARGETS); \ + do install -m 0755 $$i $(DESTDIR)$(SBINDIR); \ + done + +clean: + rm -f $(DCBOBJ) $(TARGETS)
dcb/dcb.c new file +414 -0
414 lines not on this page · raw message
dcb/dcb.h new file +39 -0
@@ -0,0 +1,39 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __DCB_H__ +#define __DCB_H__ 1 + +#include <stdbool.h> +#include <stddef.h> + +/* dcb.c */ + +struct dcb { +char *buf; +struct mnl_socket *nl; +bool json_output; +}; + +int dcb_parse_mapping (const char *what_key,__u32 key,__u32 max_key, +const char *what_value,__u32 value,__u32 max_value, +void (*set_array)(__u32 index,__u32 value,void *data), +void *set_array_data); +int dcb_cmd_parse_dev (struct dcb *dcb,int argc,char **argv, +int (*and_then)(struct dcb *dcb,const char *dev, +int argc,char **argv), +void (*help)(void )); + +void dcb_set_u8 (__u32 key,__u32 value,void *data); + +int dcb_get_attribute (struct dcb *dcb,const char *dev,int attr, +void *data,size_t data_len); +int dcb_set_attribute (struct dcb *dcb,const char *dev,int attr, +const void *data,size_t data_len); + +void dcb_print_named_array (const char *json_name,const char *fp_name, +const __u8 *array,size_t size, +void (*print_array)(const __u8 *,size_t )); +void dcb_print_array_u8 (const __u8 *array,size_t size); +void dcb_print_array_kw (const __u8 *array,size_t array_size, +const char *const kw[],size_t kw_size); + +#endif /* __DCB_H__ */
man/man8/dcb.8 new file +103 -0
103 lines not on this page · raw message
Signature · 1 line
2.25.1
PATCH v4 11/11 dcb: Add a subtool for the DCB ETS object
In reply to Petr MachataETS, for "Enhanced Transmission Selection", is a set of configurations that permit configuration of mapping of priorities to traffic classes, traffic selection algorithm to use per traffic class, bandwidth allocation, etc.
Add a dcb subtool to allow showing and tweaking of individual ETS configuration options. For example:
# dcb ets show dev eni1np1
willing on ets_cap 8 cbs off
tc-bw 0:0 1:0 2:0 3:0 4:100 5:0 6:0 7:0
pg-bw 0:0 1:0 2:0 3:0 4:0 5:0 6:0 7:0
tc-tsa 0:strict 1:strict 2:strict 3:strict 4:ets 5:strict 6:strict 7:strict
prio-tc 0:1 1:3 2:5 3:0 4:0 5:0 6:0 7:0
reco-tc-bw 0:0 1:0 2:0 3:0 4:0 5:0 6:0 7:0
reco-tc-tsa 0:strict 1:strict 2:strict 3:strict 4:strict 5:strict 6:strict 7:strict
reco-prio-tc 0:0 1:0 2:0 3:0 4:0 5:0 6:0 7:0---
Notes:
v4:
- Drop all the FILE* arguments that were passed around unnecessarily
- Emit ets-cap in FP as "ets-cap", not "ets_cap"
v3:
- Formatting tweaks in the man page
dcb/Makefile | 2 +- dcb/dcb.c | 4 +- dcb/dcb.h | 4 + dcb/dcb_ets.c | 435 +++++++++++++++++++++++++++++++++++++++++++++ man/man8/dcb-ets.8 | 185 +++++++++++++++++++ man/man8/dcb.8 | 11 ++ 6 files changed, 639 insertions(+), 2 deletions(-) create mode 100644 dcb/dcb_ets.c create mode 100644 man/man8/dcb-ets.8
dcb/Makefile +1 -1
@@ -5,7 +5,7 @@ TARGETS := ifeq ($(HAVE_MNL),y) -DCBOBJ = dcb.o +DCBOBJ = dcb.o dcb_ets.o TARGETS += dcb endif
dcb/dcb.c +3 -1
@@ -295,7 +295,7 @@ static void dcb_help(void)fprintf (stderr,"Usage: dcb [ OPTIONS ] OBJECT { COMMAND | help }\n" " dcb [ -f | --force ] { -b | --batch } filename [ -N | --Netns ] netnsname\n" -"where OBJECT :=\n" +"where OBJECT := ets\n" " OPTIONS := [ -V | --Version | -j | --json | -p | --pretty | -v | --verbose ]\n" ); }
@@ -304,6 +304,8 @@ static int dcb_cmd(struct dcb *dcb, int argc, char **argv)if (!argc ||matches (*argv,"help" ) ==0 ) {dcb_help ();return 0 ; + }else if (matches (*argv,"ets" ) ==0 ) { +return dcb_cmd_ets (dcb, argc -1 , argv +1 ); }fprintf (stderr,"Object \"%s\" is unknown\n" , *argv);
dcb/dcb.h +4 -0
@@ -36,4 +36,8 @@ void dcb_print_array_u8(const __u8 *array, size_t size);void dcb_print_array_kw (const __u8 *array,size_t array_size,const char *const kw[],size_t kw_size); +/* dcb_ets.c */ + +int dcb_cmd_ets (struct dcb *dcb,int argc,char **argv); +#endif /* __DCB_H__ */
dcb/dcb_ets.c new file +435 -0
435 lines not on this page · raw message
man/man8/dcb-ets.8 new file +185 -0
185 lines not on this page · raw message
man/man8/dcb.8 +11 -0
@@ -6,6 +6,13 @@ dcb \- show / manipulate DCB (Data Center Bridging) settings .ad l .in +8 +.ti -8 +.B dcb +.RI "[ " OPTIONS " ] " +.B ets +.RI "{ " COMMAND " | " help " }" +.sp + .ti -8 .B dcb .RB "[ " -force " ] "
@@ -46,6 +53,10 @@ When combined with -j generate a pretty JSON output. .SH OBJECTS +.TP +.B ets +- Configuration of ETS (Enhanced Transmission Selection) + .SH COMMANDS A \fICOMMAND\fR specifies the action to perform on the object. The set of
Signature · 1 line
2.25.1