Misc sam460ex fixes (was: Clean up sam460ex irq mapping)
v4 cover Misc sam460ex fixes (was: Clean up sam460ex irq mapping)
Changes from v3:
- removed first two patches changing Kconfig because the FDT one seems to be needed so we should not remove those from KConfig and there was some question about patch 1
- added a new patch to use type cast macro in sam460ex.c
- the other 3 patches should be the same as in v3
Regards,
BALATON Zoltan
BALATON Zoltan (4):
ppc440_pcix: Improve comment for IRQ mapping
ppc440_pcix: Fix register write trace event
ppc440_pcix: Fix up pci config access
sam460ex: Use type cast macro instead of simple cast
hw/ppc/ppc440_pcix.c | 50 ++++++++++++++++++++++++++++---------------- hw/ppc/sam460ex.c | 7 ++----- hw/ppc/trace-events | 1 + 3 files changed, 35 insertions(+), 23 deletions(-)
Signature · 1 line
2.21.3
PATCH v4 1/4 ppc440_pcix: Improve comment for IRQ mapping
The code mapping all PCI interrupts to a single CPU IRQ works but is not trivial so document it in a comment.
--- hw/ppc/ppc440_pcix.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-)
hw/ppc/ppc440_pcix.c +9 -2
@@ -415,8 +415,15 @@ static void ppc440_pcix_reset(DeviceState *dev) s->sts =0 ; } -/* All pins from each slot are tied to a single board IRQ. -* This may need further refactoring for other boards. */ +/* +* All four IRQ[ABCD] pins from all slots are tied to a single board +* IRQ, so our mapping function here maps everything to IRQ 0. +* The code in pci_change_irq_level() tracks the number of times +* the mapped IRQ is asserted and deasserted, so if multiple devices +* assert an IRQ at the same time the behaviour is correct. +* +* This may need further refactoring for boards that use multiple IRQ lines. +*/ static int ppc440_pcix_map_irq (PCIDevice *pci_dev,int irq_num) {trace_ppc440_pcix_map_irq (pci_dev->devfn, irq_num,0 );
Signature · 1 line
2.21.3
Re: [PATCH v4 1/4] ppc440_pcix: Improve comment for IRQ mapping
Quoted 22 lines · BALATON Zoltan
The code mapping all PCI interrupts to a single CPU IRQ works but is not trivial so document it in a comment.
Signed-off-by BALATON Zoltan <[email protected]>--- hw/ppc/ppc440_pcix.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-)hw/ppc/ppc440_pcix.c +3
-2@@ -415,8 +415,15 @@ static void ppc440_pcix_reset(DeviceState *dev) s->sts =0 ; } -/* All pins from each slot are tied to a single board IRQ. -* This may need further refactoring for other boards. */ +/* +* All four IRQ[ABCD] pins from all slots are tied to a single board +* IRQ, so our mapping function here maps everything to IRQ 0.
hw/ppc/ppc440_pcix.c static void ppc440_pcix_reset(DeviceState *dev)
Quoted 10 lines
hw/ppc/ppc440_pcix.c +6
-1+* The code in pci_change_irq_level() tracks the number of times +* the mapped IRQ is asserted and deasserted, so if multiple devices +* assert an IRQ at the same time the behaviour is correct. +* +* This may need further refactoring for boards that use multiple IRQ lines. +*/ static int ppc440_pcix_map_irq (PCIDevice *pci_dev,int irq_num) {trace_ppc440_pcix_map_irq (pci_dev->devfn, irq_num,0 ); --
thanks
-- PMM
PATCH v4 2/4 ppc440_pcix: Fix register write trace event
In reply to BALATON Zoltan viaThe trace event for pci_host_config_write() was also using the trace event for read. Add corresponding trace and correct this.
--- hw/ppc/ppc440_pcix.c | 2 +- hw/ppc/trace-events | 1 + 2 files changed, 2 insertions(+), 1 deletion(-)
hw/ppc/ppc440_pcix.c +1 -1
@@ -169,7 +169,7 @@ static void ppc440_pcix_reg_write4(void *opaque, hwaddr addr, {struct PPC440PCIXState *s = opaque; -trace_ppc440_pcix_reg_read (addr, val); +trace_ppc440_pcix_reg_write (addr, val, size);switch (addr) { case PCI_VENDOR_ID ... PCI_MAX_LAT:stl_le_p (s->dev->config + addr, val);
hw/ppc/trace-events +1 -0
@@ -117,3 +117,4 @@ ppc440_pcix_set_irq(int irq_num) "PCI irq %d" ppc440_pcix_update_pim(int idx, uint64_t size, uint64_t la) "Added window %d of size=0x%" PRIx64 " to CPU=0x%" PRIx64 ppc440_pcix_update_pom(int idx, uint32_t size, uint64_t la, uint64_t pcia) "Added window %d of size=0x%x from CPU=0x%" PRIx64 " to PCI=0x%" PRIx64 ppc440_pcix_reg_read(uint64_t addr, uint32_t val) "addr 0x%" PRIx64 " = 0x%" PRIx32 +ppc440_pcix_reg_write(uint64_t addr, uint32_t val, uint32_t size) "addr 0x%" PRIx64 " = 0x%" PRIx32 " size 0x%" PRIx32
Signature · 1 line
2.21.3
PATCH v4 3/4 ppc440_pcix: Fix up pci config access
In reply to BALATON Zoltan viaThis fixes a long standing issue with MorphOS booting on sam460ex which turns out to be because of suspicious values written to PCI config address that apparently works on real machine but caused wrong access on this device model. This replaces a previous work around for this with a better fix that makes it work.
--- hw/ppc/ppc440_pcix.c | 37 ++++++++++++++++++++++--------------- 1 file changed, 22 insertions(+), 15 deletions(-)
hw/ppc/ppc440_pcix.c +22 -15
@@ -449,28 +449,35 @@ static AddressSpace *ppc440_pcix_set_iommu(PCIBus *b, void *opaque, int devfn)return &s->bm_as; } -/* The default pci_host_data_{read,write} functions in pci/pci_host.c -* deny access to registers without bit 31 set but our clients want -* this to work so we have to override these here */ -static void pci_host_data_write (void *opaque,hwaddr addr, -uint64_t val,unsigned len) +/* +* Some guests on sam460ex write all kinds of garbage here such as +* missing enable bit and low bits set and still expect this to work +* (apparently it does on real hardware because these boot there) so +* we have to override these ops here and fix it up +*/ +static void pci_host_config_write (void *opaque,hwaddr addr, +uint64_t val,unsigned len) {PCIHostState *s = opaque; -pci_data_write (s->bus, s->config_reg | (addr &3 ), val, len); + +if (addr !=0 || len !=4 ) { +return ; + } + s->config_reg = (val &0xfffffffcULL ) | (1UL <<31 ); } -static uint64_t pci_host_data_read (void *opaque, -hwaddr addr,unsigned len) +static uint64_t pci_host_config_read (void *opaque,hwaddr addr, +unsigned len) {PCIHostState *s = opaque; -uint32_t val; - val =pci_data_read (s->bus, s->config_reg | (addr &3 ), len); +uint32_t val = s->config_reg; +return val; } -const MemoryRegionOps ppc440_pcix_host_data_ops = { - .read = pci_host_data_read, - .write = pci_host_data_write, +const MemoryRegionOps ppc440_pcix_host_conf_ops = { + .read = pci_host_config_read, + .write = pci_host_config_write, .endianness =DEVICE_LITTLE_ENDIAN , };
@@ -497,9 +504,9 @@ static void ppc440_pcix_realize(DeviceState *dev, Error **errp)pci_setup_iommu (h->bus, ppc440_pcix_set_iommu, s);memory_region_init (&s->container,OBJECT (s),"pci-container" ,PCI_ALL_SIZE ); -memory_region_init_io (&h->conf_mem,OBJECT (s), &pci_host_conf_le_ops, +memory_region_init_io (&h->conf_mem,OBJECT (s), &ppc440_pcix_host_conf_ops, h,"pci-conf-idx" ,4 ); -memory_region_init_io (&h->data_mem,OBJECT (s), &ppc440_pcix_host_data_ops, +memory_region_init_io (&h->data_mem,OBJECT (s), &pci_host_data_le_ops, h,"pci-conf-data" ,4 );memory_region_init_io (&s->iomem,OBJECT (s), &pci_reg_ops, s,"pci.reg" ,PPC440_REG_SIZE );
Signature · 1 line
2.21.3
PATCH v4 4/4 sam460ex: Use type cast macro instead of simple cast
In reply to BALATON Zoltan viaUse the PCI_BUS type cast macro to convert result of qdev_get_child_bus(). Also remove the check for NULL afterwards which should not be needed because sysbus_create_simple() uses error_abort and PCI_BUS macro also checks its argument by default so this shouldn't fail here.
--- hw/ppc/sam460ex.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-)
hw/ppc/sam460ex.c +2 -5
@@ -384,11 +384,8 @@ static void sam460ex_init(MachineState *machine)ppc460ex_pcie_init (env);/* All PCI irqs are connected to the same UIC pin (cf. UBoot source) */ dev =sysbus_create_simple ("ppc440-pcix-host" ,0xc0ec00000 , uic[1 ][0 ]); - pci_bus = (PCIBus *)qdev_get_child_bus (dev,"pci.0" ); -if (!pci_bus) { -error_report ("couldn't create PCI controller!" ); -exit (1 ); - } + pci_bus =PCI_BUS (qdev_get_child_bus (dev,"pci.0" )); +memory_region_init_alias (isa,NULL ,"isa_mmio" ,get_system_io (),0 ,0x10000 );memory_region_add_subregion (get_system_memory (),0xc08000000 , isa);
Signature · 1 line
2.21.3