Skip to contentSkip to conversation

dt: Build unittests statically with fdtoverlay

PATCH In review Viresh Kumar 3 participants 8 messages Feb 10, 2021 – Feb 12, 2021

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

v7 cover dt: Build unittests statically with fdtoverlay

Hi,

The first four patches from the previous patchset are already picked by Rob for 5.12. This patchset contains the other two that update unittests and an additional patch suggested by Rob.

V6->V7:
- Dropped the first 4 patches, already merged.
- Patch 1/3 is new, suggested by Rob and slightly modified by me.
- Adapt Patch 3/3 to the new rule and name the overlay dtbs as .dtbo.

--
Viresh

Rob Herring (1):
kbuild: Add generic rule to apply fdtoverlay

Viresh Kumar (2):
of: unittest: Create overlay_common.dtsi and testcases_common.dtsi
of: unittest: Statically apply overlays using fdtoverlay

 drivers/of/unittest-data/Makefile             | 50 ++++++++++
 drivers/of/unittest-data/overlay_base.dts     | 90 +-----------------
 drivers/of/unittest-data/overlay_common.dtsi  | 91 +++++++++++++++++++
 drivers/of/unittest-data/static_base_1.dts    |  4 +
 drivers/of/unittest-data/static_base_2.dts    |  4 +
 drivers/of/unittest-data/testcases.dts        | 18 ++--
 .../of/unittest-data/testcases_common.dtsi    | 19 ++++
 .../of/unittest-data/tests-interrupts.dtsi    |  7 --
 scripts/Makefile.lib                          | 39 +++++---
 9 files changed, 203 insertions(+), 119 deletions(-)
 create mode 100644 drivers/of/unittest-data/overlay_common.dtsi
 create mode 100644 drivers/of/unittest-data/static_base_1.dts
 create mode 100644 drivers/of/unittest-data/static_base_2.dts
 create mode 100644 drivers/of/unittest-data/testcases_common.dtsi
Signature · 7 lines
2.25.0.rc1.19.g042ed3e048af


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
#1 lore raw

PATCH v7 1/3 kbuild: Add generic rule to apply fdtoverlay

From: Rob Herring <[email protected]>

Add a generic rule to apply fdtoverlay in Makefile.lib, so every platform doesn't need to carry the complex rule.

The platform's Makefile only needs to have this now:

DTC_FLAGS_foo_base += -@
foo-dtbs := foo_base.dtb foo_overlay1.dtbo foo_overlay2.dtbo overlay-y := foo.dtb

Rearrange Makefile.lib to keep DT specific stuff together.

The files from overlay-y (i.e. files generated by fdtoverlay) aren't added to dtb-y here, as dtb-y is later used to generate .dt.yaml files and the files in overlay-y don't have a corresponding dts file and make dtbs_check fails for them.

[ Viresh: Add commit log and replace dtb-y with overlay-y, handle
CONFIG_OF_ALL_DTBS case, rearrange Makefile, don't add overlay-y to dtb-y to skip dtbs_check for them. ]

---
 scripts/Makefile.lib | 39 +++++++++++++++++++++++++++------------
 1 file changed, 27 insertions(+), 12 deletions(-)
scripts/Makefile.lib +27 -12
index b00855b247e0..a6e79e3be527 100644
@@ -66,23 +66,16 @@ multi-used   := $(multi-used-y) $(multi-used-m)
 real-obj-y := $(foreach m, $(obj-y), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y)) $($(m:.o=-))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m)))
 real-obj-m := $(foreach m, $(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y)) $($(m:.o=-m)) $($(m:.o=-))),$($(m:.o=-objs)) $($(m:.o=-y)) $($(m:.o=-m)),$(m)))
 
-always-y += $(always-m)
-
-# hostprogs-always-y += foo
-# ... is a shorthand for
-# hostprogs += foo
-# always-y  += foo
-hostprogs += $(hostprogs-always-y) $(hostprogs-always-m)
-always-y += $(hostprogs-always-y) $(hostprogs-always-m)
-
-# userprogs-always-y is likewise.
-userprogs += $(userprogs-always-y) $(userprogs-always-m)
-always-y += $(userprogs-always-y) $(userprogs-always-m)
+# Add base dtb and overlay dtbo
+dtb-y += $(foreach m,$(overlay-y), $(if $(strip $($(m:.dtb=-dtbs))),$($(m:.dtb=-dtbs)),))
+dtb-$(CONFIG_OF_ALL_DTBS) += $(foreach m,$(overlay-), $(if $(strip $($(m:.dtb=-dtbs))),$($(m:.dtb=-dtbs)),))
 
 # DTB
 # If CONFIG_OF_ALL_DTBS is enabled, all DT blobs are built
 extra-y				+= $(dtb-y)
+extra-y				+= $(overlay-y)
 extra-$(CONFIG_OF_ALL_DTBS)	+= $(dtb-)
+extra-$(CONFIG_OF_ALL_DTBS)	+= $(overlay-)
 
 ifneq ($(CHECK_DTBS),)
 extra-y += $(patsubst %.dtb,%.dt.yaml, $(dtb-y))
@@ -91,6 +84,19 @@ extra-$(CONFIG_OF_ALL_DTBS) += $(patsubst %.dtb,%.dt.yaml, $(dtb-))
 extra-$(CONFIG_OF_ALL_DTBS) += $(patsubst %.dtbo,%.dt.yaml, $(dtb-))
 endif
 
+always-y += $(always-m)
+
+# hostprogs-always-y += foo
+# ... is a shorthand for
+# hostprogs += foo
+# always-y  += foo
+hostprogs += $(hostprogs-always-y) $(hostprogs-always-m)
+always-y += $(hostprogs-always-y) $(hostprogs-always-m)
+
+# userprogs-always-y is likewise.
+userprogs += $(userprogs-always-y) $(userprogs-always-m)
+always-y += $(userprogs-always-y) $(userprogs-always-m)
+
 # Add subdir path
 
 extra-y		:= $(addprefix $(obj)/,$(extra-y))
@@ -332,6 +338,15 @@ $(obj)/%.dtb: $(src)/%.dts $(DTC) FORCE
 $(obj)/%.dtbo: $(src)/%.dts $(DTC) FORCE
 	$(call if_changed_dep,dtc)
 
+
+quiet_cmd_fdtoverlay = DTOVL   $@
+      cmd_fdtoverlay = $(objtree)/scripts/dtc/fdtoverlay -o $@ -i $(real-prereqs)
+
+.SECONDEXPANSION:
+
+$(obj)/%.dtb: $$(addprefix $$(obj)/,$$(%-dtbs)) FORCE
+	$(call if_changed,fdtoverlay)
+
 DT_CHECKER ?= dt-validate
 DT_BINDING_DIR := Documentation/devicetree/bindings
 # DT_TMP_SCHEMA may be overridden from Documentation/devicetree/bindings/Makefile
Signature · 7 lines
2.25.0.rc1.19.g042ed3e048af


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
#2 lore raw

Re: [PATCH V7 1/3] kbuild: Add generic rule to apply fdtoverlay

Quoted 11 lines · Viresh Kumar

From: Rob Herring <[email protected]>

Add a generic rule to apply fdtoverlay in Makefile.lib, so every platform doesn't need to carry the complex rule.

The platform's Makefile only needs to have this now:

DTC_FLAGS_foo_base += -@
foo-dtbs := foo_base.dtb foo_overlay1.dtbo foo_overlay2.dtbo overlay-y := foo.dtb

Please reuse dtb-y instead of introducing the new overlay-y syntax, that is,

foo-dtbs := foo_base.dtb foo_overlay1.dtbo foo_overlay2.dtbo dtb-y := foo.dtb

This resembles to composite modules.

foo-objs := foo1.o foo2.o foo3.o
obj-m := foo.o

Quoted 72 lines

Rearrange Makefile.lib to keep DT specific stuff together.

The files from overlay-y (i.e. files generated by fdtoverlay) aren't added to dtb-y here, as dtb-y is later used to generate .dt.yaml files and the files in overlay-y don't have a corresponding dts file and make dtbs_check fails for them.

[ Viresh: Add commit log and replace dtb-y with overlay-y, handle
CONFIG_OF_ALL_DTBS case, rearrange Makefile, don't add overlay-y to dtb-y to skip dtbs_check for them. ]

---
 scripts/Makefile.lib | 39 +++++++++++++++++++++++++++------------
 1 file changed, 27 insertions(+), 12 deletions(-)
scripts/Makefile.lib +18 -12
index b00855b247e0..a6e79e3be527 100644
@@ -66,23 +66,16 @@ multi-used   := $(multi-used-y) $(multi-used-m)
 real-obj-y := $(foreach m, $(obj-y), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y)) $($(m:.o=-))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m)))
 real-obj-m := $(foreach m, $(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y)) $($(m:.o=-m)) $($(m:.o=-))),$($(m:.o=-objs)) $($(m:.o=-y)) $($(m:.o=-m)),$(m)))
 
-always-y += $(always-m)
-
-# hostprogs-always-y += foo
-# ... is a shorthand for
-# hostprogs += foo
-# always-y  += foo
-hostprogs += $(hostprogs-always-y) $(hostprogs-always-m)
-always-y += $(hostprogs-always-y) $(hostprogs-always-m)
-
-# userprogs-always-y is likewise.
-userprogs += $(userprogs-always-y) $(userprogs-always-m)
-always-y += $(userprogs-always-y) $(userprogs-always-m)
+# Add base dtb and overlay dtbo
+dtb-y += $(foreach m,$(overlay-y), $(if $(strip $($(m:.dtb=-dtbs))),$($(m:.dtb=-dtbs)),))
+dtb-$(CONFIG_OF_ALL_DTBS) += $(foreach m,$(overlay-), $(if $(strip $($(m:.dtb=-dtbs))),$($(m:.dtb=-dtbs)),))
 
 # DTB
 # If CONFIG_OF_ALL_DTBS is enabled, all DT blobs are built
 extra-y                                += $(dtb-y)
+extra-y                                += $(overlay-y)
 extra-$(CONFIG_OF_ALL_DTBS)    += $(dtb-)
+extra-$(CONFIG_OF_ALL_DTBS)    += $(overlay-)
 
 ifneq ($(CHECK_DTBS),)
 extra-y += $(patsubst %.dtb,%.dt.yaml, $(dtb-y))
@@ -91,6 +84,19 @@ extra-$(CONFIG_OF_ALL_DTBS) += $(patsubst %.dtb,%.dt.yaml, $(dtb-))
 extra-$(CONFIG_OF_ALL_DTBS) += $(patsubst %.dtbo,%.dt.yaml, $(dtb-))
 endif
 
+always-y += $(always-m)
+
+# hostprogs-always-y += foo
+# ... is a shorthand for
+# hostprogs += foo
+# always-y  += foo
+hostprogs += $(hostprogs-always-y) $(hostprogs-always-m)
+always-y += $(hostprogs-always-y) $(hostprogs-always-m)
+
+# userprogs-always-y is likewise.
+userprogs += $(userprogs-always-y) $(userprogs-always-m)
+always-y += $(userprogs-always-y) $(userprogs-always-m)
+
 # Add subdir path
 
 extra-y                := $(addprefix $(obj)/,$(extra-y))
@@ -332,6 +338,15 @@ $(obj)/%.dtb: $(src)/%.dts $(DTC) FORCE
 $(obj)/%.dtbo: $(src)/%.dts $(DTC) FORCE
        $(call if_changed_dep,dtc)

scripts/Makefile.lib $(obj)/%.dtb: $(src)/%.dts $(DTC) FORCE · line 349

Quoted 10 lines
scripts/Makefile.lib +9 -0
 
+
+quiet_cmd_fdtoverlay = DTOVL   $@
+      cmd_fdtoverlay = $(objtree)/scripts/dtc/fdtoverlay -o $@ -i $(real-prereqs)
+
+.SECONDEXPANSION:
+
+$(obj)/%.dtb: $$(addprefix $$(obj)/,$$(%-dtbs)) FORCE
+       $(call if_changed,fdtoverlay)
+

Please do not use .SECONDEXPANSION.

This will parse the Makefile twice
in _all_ directories, while only a few directories use the overlay-y syntax.

Use the multi_depend macro.

Quoted 6 lines
scripts/Makefile.lib +0 -1
 DT_CHECKER ?= dt-validate
 DT_BINDING_DIR := Documentation/devicetree/bindings
 # DT_TMP_SCHEMA may be overridden from Documentation/devicetree/bindings/Makefile
--

2.25.0.rc1.19.g042ed3e048af

--
Best Regards
Masahiro Yamada

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

#3 lore raw

Re: [PATCH V7 1/3] kbuild: Add generic rule to apply fdtoverlay

Quoted 15 lines · Masahiro Yamada
Quoted 11 lines · Viresh Kumar

From: Rob Herring <[email protected]>

Add a generic rule to apply fdtoverlay in Makefile.lib, so every platform doesn't need to carry the complex rule.

The platform's Makefile only needs to have this now:

DTC_FLAGS_foo_base += -@
foo-dtbs := foo_base.dtb foo_overlay1.dtbo foo_overlay2.dtbo overlay-y := foo.dtb

Quoted 5 lines

Please reuse dtb-y instead of introducing the new overlay-y syntax, that is,

foo-dtbs := foo_base.dtb foo_overlay1.dtbo foo_overlay2.dtbo dtb-y := foo.dtb

That's what I had, but I believe Viresh changed this because we don't want to run schema checks on foo.dtb (as foo.dts doesn't exist). However, we should be able to filter those out using something similar to technique used for multi-used-y and real-obj-y. We just need to drop composite entries when creating the .dt.yaml list.

Quoted 10 lines

This resembles to composite modules.

foo-objs := foo1.o foo2.o foo3.o
obj-m := foo.o

Quoted 1 line

Rearrange Makefile.lib to keep DT specific stuff together.

Would be better if you do this in a separate patch or not at all. It was sorted more by the type of operation, than the target. Also, we also already have one conflict in linux-next with changing extra- to always-, let's not make it worse or this will be 5.13 for sure.

Quoted 85 lines
Quoted 70 lines

The files from overlay-y (i.e. files generated by fdtoverlay) aren't added to dtb-y here, as dtb-y is later used to generate .dt.yaml files and the files in overlay-y don't have a corresponding dts file and make dtbs_check fails for them.

[ Viresh: Add commit log and replace dtb-y with overlay-y, handle
CONFIG_OF_ALL_DTBS case, rearrange Makefile, don't add overlay-y to dtb-y to skip dtbs_check for them. ]

---
 scripts/Makefile.lib | 39 +++++++++++++++++++++++++++------------
 1 file changed, 27 insertions(+), 12 deletions(-)
scripts/Makefile.lib +18 -12
index b00855b247e0..a6e79e3be527 100644
@@ -66,23 +66,16 @@ multi-used   := $(multi-used-y) $(multi-used-m)
 real-obj-y := $(foreach m, $(obj-y), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y)) $($(m:.o=-))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m)))
 real-obj-m := $(foreach m, $(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y)) $($(m:.o=-m)) $($(m:.o=-))),$($(m:.o=-objs)) $($(m:.o=-y)) $($(m:.o=-m)),$(m)))
 
-always-y += $(always-m)
-
-# hostprogs-always-y += foo
-# ... is a shorthand for
-# hostprogs += foo
-# always-y  += foo
-hostprogs += $(hostprogs-always-y) $(hostprogs-always-m)
-always-y += $(hostprogs-always-y) $(hostprogs-always-m)
-
-# userprogs-always-y is likewise.
-userprogs += $(userprogs-always-y) $(userprogs-always-m)
-always-y += $(userprogs-always-y) $(userprogs-always-m)
+# Add base dtb and overlay dtbo
+dtb-y += $(foreach m,$(overlay-y), $(if $(strip $($(m:.dtb=-dtbs))),$($(m:.dtb=-dtbs)),))
+dtb-$(CONFIG_OF_ALL_DTBS) += $(foreach m,$(overlay-), $(if $(strip $($(m:.dtb=-dtbs))),$($(m:.dtb=-dtbs)),))
 
 # DTB
 # If CONFIG_OF_ALL_DTBS is enabled, all DT blobs are built
 extra-y                                += $(dtb-y)
+extra-y                                += $(overlay-y)
 extra-$(CONFIG_OF_ALL_DTBS)    += $(dtb-)
+extra-$(CONFIG_OF_ALL_DTBS)    += $(overlay-)
 
 ifneq ($(CHECK_DTBS),)
 extra-y += $(patsubst %.dtb,%.dt.yaml, $(dtb-y))
@@ -91,6 +84,19 @@ extra-$(CONFIG_OF_ALL_DTBS) += $(patsubst %.dtb,%.dt.yaml, $(dtb-))
 extra-$(CONFIG_OF_ALL_DTBS) += $(patsubst %.dtbo,%.dt.yaml, $(dtb-))
 endif
 
+always-y += $(always-m)
+
+# hostprogs-always-y += foo
+# ... is a shorthand for
+# hostprogs += foo
+# always-y  += foo
+hostprogs += $(hostprogs-always-y) $(hostprogs-always-m)
+always-y += $(hostprogs-always-y) $(hostprogs-always-m)
+
+# userprogs-always-y is likewise.
+userprogs += $(userprogs-always-y) $(userprogs-always-m)
+always-y += $(userprogs-always-y) $(userprogs-always-m)
+
 # Add subdir path
 
 extra-y                := $(addprefix $(obj)/,$(extra-y))
@@ -332,6 +338,15 @@ $(obj)/%.dtb: $(src)/%.dts $(DTC) FORCE
 $(obj)/%.dtbo: $(src)/%.dts $(DTC) FORCE
        $(call if_changed_dep,dtc)

scripts/Makefile.lib $(obj)/%.dtb: $(src)/%.dts $(DTC) FORCE · line 349

Quoted 10 lines
scripts/Makefile.lib +9 -0
 
+
+quiet_cmd_fdtoverlay = DTOVL   $@
+      cmd_fdtoverlay = $(objtree)/scripts/dtc/fdtoverlay -o $@ -i $(real-prereqs)
+
+.SECONDEXPANSION:
+
+$(obj)/%.dtb: $$(addprefix $$(obj)/,$$(%-dtbs)) FORCE
+       $(call if_changed,fdtoverlay)
+

Please do not use .SECONDEXPANSION.

Quoted 6 lines

This will parse the Makefile twice
in _all_ directories, while only a few directories use the overlay-y syntax.

Use the multi_depend macro.

I knew you'd have a better way.

Rob

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

#4 lore raw

Re: [PATCH V7 1/3] kbuild: Add generic rule to apply fdtoverlay

Quoted 20 lines · Rob Herring
Quoted 18 lines · Masahiro Yamada
Quoted 11 lines · Viresh Kumar

From: Rob Herring <[email protected]>

Add a generic rule to apply fdtoverlay in Makefile.lib, so every platform doesn't need to carry the complex rule.

The platform's Makefile only needs to have this now:

DTC_FLAGS_foo_base += -@
foo-dtbs := foo_base.dtb foo_overlay1.dtbo foo_overlay2.dtbo overlay-y := foo.dtb

Please reuse dtb-y instead of introducing the new
overlay-y syntax, that is,

Quoted 8 lines
Quoted 2 lines

foo-dtbs := foo_base.dtb foo_overlay1.dtbo foo_overlay2.dtbo dtb-y := foo.dtb

That's what I had, but I believe Viresh changed this because we don't want to run schema checks on foo.dtb (as foo.dts doesn't exist). However, we should be able to filter those out using something similar to technique used for multi-used-y and real-obj-y. We just need to drop composite entries when creating the .dt.yaml list.

Yes, I think this will work.

BTW, I do not know how to use overlay.
Do we apply overlay in the build time?
If so, I do not know what the benefit of overlay is. Or is this just for build testing?

I just thought this was done in the boot time,
for example, in U-Boot or something.

Signature · 2 lines
Best Regards
Masahiro Yamada
#5 lore raw

Re: [PATCH V7 1/3] kbuild: Add generic rule to apply fdtoverlay

Quoted 2 lines · Masahiro Yamada

BTW, I do not know how to use overlay.
Do we apply overlay in the build time?

Ideally it can be applied at both build time and runtime, but we haven't allowed the runtime way until now in kernel. This patchset is all about applying it at build time.

Quoted 2 lines

If so, I do not know what the benefit of overlay is. Or is this just for build testing?

For now the main benefit of using them is that we can keep stuff in separate files without including each other. For example a primary board may or may not have an extension board connected to it.

Without overlays we will have this many dtbs for this simple case:
1. primary.dtb
2. extension.dtb
3. primary-includes-extension.dtb

With overlays we will have the first two. Now the same extension can be applied to lots of boards and multiple extensions can be applied to the same primary board. This just complicates the process of managing dtbs.

Quoted 2 lines

I just thought this was done in the boot time, for example, in U-Boot or something.

Yes, bootloader can do it as well.

Signature · 1 line
viresh
#6 lore raw

PATCH v7 2/3 of: unittest: Create overlay_common.dtsi and testcases_common.dtsi

In reply to Viresh Kumar

In order to build-test the same unit-test files using fdtoverlay tool, move the device nodes from the existing overlay_base.dts and testcases_common.dts files to .dtsi counterparts. The .dts files now include the new .dtsi files, resulting in exactly the same behavior as earlier.

The .dtsi files can now be reused for compile time tests using fdtoverlay (will be done by a later commit).

This is required because the base files passed to fdtoverlay tool shouldn't be overlays themselves (i.e. shouldn't have the /plugin/; tag).

Note that this commit also moves "testcase-device2" node to testcases.dts from tests-interrupts.dtsi, as this node has a deliberate error in it and is only relevant for runtime testing done with unittest.c.

---
 drivers/of/unittest-data/overlay_base.dts     | 90 +-----------------
 drivers/of/unittest-data/overlay_common.dtsi  | 91 +++++++++++++++++++
 drivers/of/unittest-data/testcases.dts        | 18 ++--
 .../of/unittest-data/testcases_common.dtsi    | 19 ++++
 .../of/unittest-data/tests-interrupts.dtsi    |  7 --
 5 files changed, 118 insertions(+), 107 deletions(-)
 create mode 100644 drivers/of/unittest-data/overlay_common.dtsi
 create mode 100644 drivers/of/unittest-data/testcases_common.dtsi
drivers/of/unittest-data/overlay_base.dts +1 -89
index 99ab9d12d00b..ab9014589c5d 100644
@@ -2,92 +2,4 @@
 /dts-v1/;
 /plugin/;
 
-/*
- * Base device tree that overlays will be applied against.
- *
- * Do not add any properties in node "/".
- * Do not add any nodes other than "/testcase-data-2" in node "/".
- * Do not add anything that would result in dtc creating node "/__fixups__".
- * dtc will create nodes "/__symbols__" and "/__local_fixups__".
- */
-
-/ {
-	testcase-data-2 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		electric_1: substation@100 {
-			compatible = "ot,big-volts-control";
-			reg = < 0x00000100 0x100 >;
-			status = "disabled";
-
-			hvac_1: hvac-medium-1 {
-				compatible = "ot,hvac-medium";
-				heat-range = < 50 75 >;
-				cool-range = < 60 80 >;
-			};
-
-			spin_ctrl_1: motor-1 {
-				compatible = "ot,ferris-wheel-motor";
-				spin = "clockwise";
-				rpm_avail = < 50 >;
-			};
-
-			spin_ctrl_2: motor-8 {
-				compatible = "ot,roller-coaster-motor";
-			};
-		};
-
-		rides_1: fairway-1 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "ot,rides";
-			status = "disabled";
-			orientation = < 127 >;
-
-			ride@100 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "ot,roller-coaster";
-				reg = < 0x00000100 0x100 >;
-				hvac-provider = < &hvac_1 >;
-				hvac-thermostat = < 29 > ;
-				hvac-zones = < 14 >;
-				hvac-zone-names = "operator";
-				spin-controller = < &spin_ctrl_2 5 &spin_ctrl_2 7 >;
-				spin-controller-names = "track_1", "track_2";
-				queues = < 2 >;
-
-				track@30 {
-					reg = < 0x00000030 0x10 >;
-				};
-
-				track@40 {
-					reg = < 0x00000040 0x10 >;
-				};
-
-			};
-		};
-
-		lights_1: lights@30000 {
-			compatible = "ot,work-lights";
-			reg = < 0x00030000 0x1000 >;
-			status = "disabled";
-		};
-
-		lights_2: lights@40000 {
-			compatible = "ot,show-lights";
-			reg = < 0x00040000 0x1000 >;
-			status = "disabled";
-			rate = < 13 138 >;
-		};
-
-		retail_1: vending@50000 {
-			reg = < 0x00050000 0x1000 >;
-			compatible = "ot,tickets";
-			status = "disabled";
-		};
-
-	};
-};
-
+#include "overlay_common.dtsi"
drivers/of/unittest-data/overlay_common.dtsi new file +91 -0

91 lines not on this page · raw message

drivers/of/unittest-data/testcases.dts +7 -11
index a85b5e1c381a..04b9e7bb30d9 100644
@@ -2,19 +2,15 @@
 /dts-v1/;
 /plugin/;
 
+#include "testcases_common.dtsi"
+
 / {
 	testcase-data {
-		changeset {
-			prop-update = "hello";
-			prop-remove = "world";
-			node-remove {
-			};
+		testcase-device2 {
+			compatible = "testcase-device";
+			interrupt-parent = <&test_intc2>;
+			interrupts = <1>; /* invalid specifier - too short */
 		};
 	};
+
 };
-#include "tests-phandle.dtsi"
-#include "tests-interrupts.dtsi"
-#include "tests-match.dtsi"
-#include "tests-address.dtsi"
-#include "tests-platform.dtsi"
-#include "tests-overlay.dtsi"
drivers/of/unittest-data/testcases_common.dtsi new file +19 -0
new file mode 100644
index 000000000000..19292bbb4cbb
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	testcase-data {
+		changeset {
+			prop-update = "hello";
+			prop-remove = "world";
+			node-remove {
+			};
+		};
+	};
+};
+
+#include "tests-phandle.dtsi"
+#include "tests-interrupts.dtsi"
+#include "tests-match.dtsi"
+#include "tests-address.dtsi"
+#include "tests-platform.dtsi"
+#include "tests-overlay.dtsi"
drivers/of/unittest-data/tests-interrupts.dtsi +0 -7
index ec175e800725..0e5914611107 100644
@@ -61,12 +61,5 @@ testcase-device1 {
 			interrupt-parent = <&test_intc0>;
 			interrupts = <1>;
 		};
-
-		testcase-device2 {
-			compatible = "testcase-device";
-			interrupt-parent = <&test_intc2>;
-			interrupts = <1>; /* invalid specifier - too short */
-		};
 	};
-
 };
Signature · 7 lines
2.25.0.rc1.19.g042ed3e048af


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
#7 lore raw

PATCH v7 3/3 of: unittest: Statically apply overlays using fdtoverlay

In reply to Viresh Kumar

Now that fdtoverlay is part of the kernel build, start using it to test the unitest overlays we have by applying them statically. Create two new base files static_base_1.dts and static_base_2.dts which includes other .dtsi files.

Some unittest overlays deliberately contain errors that unittest checks for. These overlays will cause fdtoverlay to fail, and are thus not included for static builds.

---
 drivers/of/unittest-data/Makefile          | 50 ++++++++++++++++++++++
 drivers/of/unittest-data/static_base_1.dts |  4 ++
 drivers/of/unittest-data/static_base_2.dts |  4 ++
 3 files changed, 58 insertions(+)
 create mode 100644 drivers/of/unittest-data/static_base_1.dts
 create mode 100644 drivers/of/unittest-data/static_base_2.dts
drivers/of/unittest-data/Makefile +50 -0
index 009f4045c8e4..1d6029e722c0 100644
@@ -34,7 +34,57 @@ DTC_FLAGS_overlay += -@
 DTC_FLAGS_overlay_bad_phandle += -@
 DTC_FLAGS_overlay_bad_symbol += -@
 DTC_FLAGS_overlay_base += -@
+DTC_FLAGS_static_base_1 += -@
+DTC_FLAGS_static_base_2 += -@
 DTC_FLAGS_testcases += -@
 
 # suppress warnings about intentional errors
 DTC_FLAGS_testcases += -Wno-interrupts_property
+
+# Apply overlays statically with fdtoverlay.  This is a build time test that
+# the overlays can be applied successfully by fdtoverlay.  This does not
+# guarantee that the overlays can be applied successfully at run time by
+# unittest, but it provides a bit of build time test coverage for those
+# who do not execute unittest.
+#
+# The overlays are applied on top of static_base_1.dtb and static_base_2.dtb to
+# create static_test_1.dtb and static_test_2.dtb.  If fdtoverlay detects an
+# error than the kernel build will fail.  static_test_1.dtb and
+# static_test_2.dtb are not consumed by unittest.
+#
+# Some unittest overlays deliberately contain errors that unittest checks for.
+# These overlays will cause fdtoverlay to fail, and are thus not included
+# in the static test:
+#			  overlay_bad_add_dup_node.dtb \
+#			  overlay_bad_add_dup_prop.dtb \
+#			  overlay_bad_phandle.dtb \
+#			  overlay_bad_symbol.dtb \
+
+apply_static_overlay_1 := overlay_0.dtbo \
+			  overlay_1.dtbo \
+			  overlay_2.dtbo \
+			  overlay_3.dtbo \
+			  overlay_4.dtbo \
+			  overlay_5.dtbo \
+			  overlay_6.dtbo \
+			  overlay_7.dtbo \
+			  overlay_8.dtbo \
+			  overlay_9.dtbo \
+			  overlay_10.dtbo \
+			  overlay_11.dtbo \
+			  overlay_12.dtbo \
+			  overlay_13.dtbo \
+			  overlay_15.dtbo \
+			  overlay_gpio_01.dtbo \
+			  overlay_gpio_02a.dtbo \
+			  overlay_gpio_02b.dtbo \
+			  overlay_gpio_03.dtbo \
+			  overlay_gpio_04a.dtbo \
+			  overlay_gpio_04b.dtbo
+
+apply_static_overlay_2 := overlay.dtbo
+
+static_test_1-dtbs := static_base_1.dtb $(apply_static_overlay_1)
+static_test_2-dtbs := static_base_2.dtb $(apply_static_overlay_2)
+
+overlay-$(CONFIG_OF_OVERLAY) += static_test_1.dtb static_test_2.dtb
drivers/of/unittest-data/static_base_1.dts new file +4 -0
new file mode 100644
index 000000000000..10556cb3f01f
@@ -0,0 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "testcases_common.dtsi"
drivers/of/unittest-data/static_base_2.dts new file +4 -0
new file mode 100644
index 000000000000..b0ea9504d6f3
@@ -0,0 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "overlay_common.dtsi"
Signature · 7 lines
2.25.0.rc1.19.g042ed3e048af


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel