dt: Add fdtoverlay rule and statically build unittest

index eee59184de64..a2658242d956 100644
@@ -73,14 +73,13 @@ always-y += $(userprogs-always-y) $(userprogs-always-m)
 
 # DTB
 # If CONFIG_OF_ALL_DTBS is enabled, all DT blobs are built
+dtb-$(CONFIG_OF_ALL_DTBS)       += $(dtb-)
+
 always-y			+= $(dtb-y)
-always-$(CONFIG_OF_ALL_DTBS)	+= $(dtb-)
 
 ifneq ($(CHECK_DTBS),)
 always-y += $(patsubst %.dtb,%.dt.yaml, $(dtb-y))
 always-y += $(patsubst %.dtbo,%.dt.yaml, $(dtb-y))
-always-$(CONFIG_OF_ALL_DTBS) += $(patsubst %.dtb,%.dt.yaml, $(dtb-))
-always-$(CONFIG_OF_ALL_DTBS) += $(patsubst %.dtbo,%.dt.yaml, $(dtb-))
 endif
 
 # Add subdir path

index a2658242d956..c430fbb36763 100644
@@ -58,6 +58,10 @@ real-search = $(foreach m,$(1), $(if $(strip $(call suffix-search,$(m),$(2) -)),
 real-obj-y := $(call real-search, $(obj-y),-objs -y)
 real-obj-m := $(call real-search, $(obj-m),-objs -y -m)
 
+# List all dtbs to be generated by fdtoverlay
+overlay-y := $(foreach m,$(dtb-y), $(if $(strip $($(m:.dtb=-dtbs))),$(m),))
+overlay-$(CONFIG_OF_ALL_DTBS) += $(foreach m,$(dtb-), $(if $(strip $($(m:.dtb=-dtbs))),$(m),))
+
 always-y += $(always-m)
 
 # hostprogs-always-y += foo

@@ -72,14 +76,21 @@ userprogs += $(userprogs-always-y) $(userprogs-always-m)
 always-y += $(userprogs-always-y) $(userprogs-always-m)
 
 # DTB
+# Add base dtb and overlay dtbo
+dtb-y += $(foreach m,$(overlay-y), $($(m:.dtb=-dtbs)))
+
 # If CONFIG_OF_ALL_DTBS is enabled, all DT blobs are built
 dtb-$(CONFIG_OF_ALL_DTBS)       += $(dtb-)
 
 always-y			+= $(dtb-y)
 
 ifneq ($(CHECK_DTBS),)
-always-y += $(patsubst %.dtb,%.dt.yaml, $(dtb-y))
-always-y += $(patsubst %.dtbo,%.dt.yaml, $(dtb-y))
+# Don't run schema checks for dtbs created by fdtoverlay as they don't
+# have corresponding dts files.
+dt-yaml-y := $(filter-out $(overlay-y),$(dtb-y))
+
+always-y += $(patsubst %.dtb,%.dt.yaml, $(dt-yaml-y))
+always-y += $(patsubst %.dtbo,%.dt.yaml, $(dt-yaml-y))
 endif
 
 # Add subdir path

@@ -337,6 +348,15 @@ $(obj)/%.dtb: $(src)/%.dts $(DTC) FORCE
 $(obj)/%.dtbo: $(src)/%.dts $(DTC) FORCE
 	$(call if_changed_dep,dtc)
 
+overlay-y := $(addprefix $(obj)/, $(overlay-y))
+
+quiet_cmd_fdtoverlay = DTOVL   $@
+      cmd_fdtoverlay = $(objtree)/scripts/dtc/fdtoverlay -o $@ -i $(real-prereqs)
+
+$(overlay-y): FORCE
+	$(call if_changed,fdtoverlay)
+$(call multi_depend, $(overlay-y), .dtb, -dtbs)
+
 DT_CHECKER ?= dt-validate
 DT_BINDING_DIR := Documentation/devicetree/bindings
 # DT_TMP_SCHEMA may be overridden from Documentation/devicetree/bindings/Makefile

index 99ab9d12d00b..ab9014589c5d 100644
@@ -2,92 +2,4 @@
 /dts-v1/;
 /plugin/;
 
-/*
- * Base device tree that overlays will be applied against.
- *
- * Do not add any properties in node "/".
- * Do not add any nodes other than "/testcase-data-2" in node "/".
- * Do not add anything that would result in dtc creating node "/__fixups__".
- * dtc will create nodes "/__symbols__" and "/__local_fixups__".
- */
-
-/ {
-	testcase-data-2 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		electric_1: substation@100 {
-			compatible = "ot,big-volts-control";
-			reg = < 0x00000100 0x100 >;
-			status = "disabled";
-
-			hvac_1: hvac-medium-1 {
-				compatible = "ot,hvac-medium";
-				heat-range = < 50 75 >;
-				cool-range = < 60 80 >;
-			};
-
-			spin_ctrl_1: motor-1 {
-				compatible = "ot,ferris-wheel-motor";
-				spin = "clockwise";
-				rpm_avail = < 50 >;
-			};
-
-			spin_ctrl_2: motor-8 {
-				compatible = "ot,roller-coaster-motor";
-			};
-		};
-
-		rides_1: fairway-1 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "ot,rides";
-			status = "disabled";
-			orientation = < 127 >;
-
-			ride@100 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "ot,roller-coaster";
-				reg = < 0x00000100 0x100 >;
-				hvac-provider = < &hvac_1 >;
-				hvac-thermostat = < 29 > ;
-				hvac-zones = < 14 >;
-				hvac-zone-names = "operator";
-				spin-controller = < &spin_ctrl_2 5 &spin_ctrl_2 7 >;
-				spin-controller-names = "track_1", "track_2";
-				queues = < 2 >;
-
-				track@30 {
-					reg = < 0x00000030 0x10 >;
-				};
-
-				track@40 {
-					reg = < 0x00000040 0x10 >;
-				};
-
-			};
-		};
-
-		lights_1: lights@30000 {
-			compatible = "ot,work-lights";
-			reg = < 0x00030000 0x1000 >;
-			status = "disabled";
-		};
-
-		lights_2: lights@40000 {
-			compatible = "ot,show-lights";
-			reg = < 0x00040000 0x1000 >;
-			status = "disabled";
-			rate = < 13 138 >;
-		};
-
-		retail_1: vending@50000 {
-			reg = < 0x00050000 0x1000 >;
-			compatible = "ot,tickets";
-			status = "disabled";
-		};
-
-	};
-};
-
+#include "overlay_common.dtsi"

91 lines not on this page · raw message

index a85b5e1c381a..b80d6009ad7a 100644
@@ -2,19 +2,20 @@
 /dts-v1/;
 /plugin/;
 
+#include "testcases_common.dtsi"
+
 / {
+        /*
+	 * testcase data that intentionally results in an error is located here
+	 * instead of in testcases_common.dtsi so that the static overlay apply
+	 * tests will not include the error.
+         */
 	testcase-data {
-		changeset {
-			prop-update = "hello";
-			prop-remove = "world";
-			node-remove {
-			};
+		testcase-device2 {
+			compatible = "testcase-device";
+			interrupt-parent = <&test_intc2>;
+			interrupts = <1>; /* invalid specifier - too short */
 		};
 	};
+
 };
-#include "tests-phandle.dtsi"
-#include "tests-interrupts.dtsi"
-#include "tests-match.dtsi"
-#include "tests-address.dtsi"
-#include "tests-platform.dtsi"
-#include "tests-overlay.dtsi"

new file mode 100644
index 000000000000..19292bbb4cbb
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	testcase-data {
+		changeset {
+			prop-update = "hello";
+			prop-remove = "world";
+			node-remove {
+			};
+		};
+	};
+};
+
+#include "tests-phandle.dtsi"
+#include "tests-interrupts.dtsi"
+#include "tests-match.dtsi"
+#include "tests-address.dtsi"
+#include "tests-platform.dtsi"
+#include "tests-overlay.dtsi"

index ec175e800725..6c58fd61585c 100644
@@ -62,11 +62,10 @@ testcase-device1 {
 			interrupts = <1>;
 		};
 
-		testcase-device2 {
-			compatible = "testcase-device";
-			interrupt-parent = <&test_intc2>;
-			interrupts = <1>; /* invalid specifier - too short */
-		};
+		/*
+		 * testcase data that intentionally results in an error is
+		 * located in testcases.dts instead of in this file so that the
+		 * static overlay apply tests will not include the error.
+                 */
 	};
-
 };

index 009f4045c8e4..f88b2f48f172 100644
@@ -34,7 +34,57 @@ DTC_FLAGS_overlay += -@
 DTC_FLAGS_overlay_bad_phandle += -@
 DTC_FLAGS_overlay_bad_symbol += -@
 DTC_FLAGS_overlay_base += -@
+DTC_FLAGS_static_base_1 += -@
+DTC_FLAGS_static_base_2 += -@
 DTC_FLAGS_testcases += -@
 
 # suppress warnings about intentional errors
 DTC_FLAGS_testcases += -Wno-interrupts_property
+
+# Apply overlays statically with fdtoverlay.  This is a build time test that
+# the overlays can be applied successfully by fdtoverlay.  This does not
+# guarantee that the overlays can be applied successfully at run time by
+# unittest, but it provides a bit of build time test coverage for those
+# who do not execute unittest.
+#
+# The overlays are applied on top of static_base_1.dtb and static_base_2.dtb to
+# create static_test_1.dtb and static_test_2.dtb.  If fdtoverlay detects an
+# error than the kernel build will fail.  static_test_1.dtb and
+# static_test_2.dtb are not consumed by unittest.
+#
+# Some unittest overlays deliberately contain errors that unittest checks for.
+# These overlays will cause fdtoverlay to fail, and are thus not included
+# in the static test:
+#			  overlay_bad_add_dup_node.dtbo \
+#			  overlay_bad_add_dup_prop.dtbo \
+#			  overlay_bad_phandle.dtbo \
+#			  overlay_bad_symbol.dtbo \
+
+apply_static_overlay_1 := overlay_0.dtbo \
+			  overlay_1.dtbo \
+			  overlay_2.dtbo \
+			  overlay_3.dtbo \
+			  overlay_4.dtbo \
+			  overlay_5.dtbo \
+			  overlay_6.dtbo \
+			  overlay_7.dtbo \
+			  overlay_8.dtbo \
+			  overlay_9.dtbo \
+			  overlay_10.dtbo \
+			  overlay_11.dtbo \
+			  overlay_12.dtbo \
+			  overlay_13.dtbo \
+			  overlay_15.dtbo \
+			  overlay_gpio_01.dtbo \
+			  overlay_gpio_02a.dtbo \
+			  overlay_gpio_02b.dtbo \
+			  overlay_gpio_03.dtbo \
+			  overlay_gpio_04a.dtbo \
+			  overlay_gpio_04b.dtbo
+
+apply_static_overlay_2 := overlay.dtbo
+
+static_test_1-dtbs := static_base_1.dtb $(apply_static_overlay_1)
+static_test_2-dtbs := static_base_2.dtb $(apply_static_overlay_2)
+
+dtb-$(CONFIG_OF_OVERLAY) += static_test_1.dtb static_test_2.dtb

new file mode 100644
index 000000000000..10556cb3f01f
@@ -0,0 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "testcases_common.dtsi"

new file mode 100644
index 000000000000..b0ea9504d6f3
@@ -0,0 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "overlay_common.dtsi"