staging: rtl8723bs: core: Patchsets cleans up in rtw_ap.c
cover staging: rtl8723bs: core: Patchsets cleans up in rtw_ap.c
Patchset of cleans up checks of "Blank lines aren't necessary before a close brace '}'", "Lines should not end with a '('", "line over 100 characters", and "Alignment should match open parenthesis" in file rtw_ap.c.
Beatriz Martins de Carvalho (4):
staging: rtl8723bs: core: Removed extra blank line
staging: rtl8723bs: core: Ending line with argument
staging: rtl8723bs: core: reorganize characters so the lines are under
100 ch
staging: rtl8723bs: core: align arguments with open parenthesis
drivers/staging/rtl8723bs/core/rtw_ap.c | 137 +++++++++++------------- 1 file changed, 62 insertions(+), 75 deletions(-)
Signature · 1 line
2.25.1
PATCH 1/4 staging: rtl8723bs: core: Removed extra blank line
Clean up check of "Blank lines aren't necessary before a close brace '}'" in rtw_ap.c
--- drivers/staging/rtl8723bs/core/rtw_ap.c | 1 - 1 file changed, 1 deletion(-)
drivers/staging/rtl8723bs/core/rtw_ap.c +0 -1
@@ -910,7 +910,6 @@ void start_bss_network(struct adapter *padapter, u8 *pbuf)/* issue beacon frame */ if (send_beacon (padapter) == _FAIL)DBG_871X ("issue_beacon, fail!\n" ); - }/* update bc/mc sta_info */
Signature · 1 line
2.25.1
PATCH 2/4 staging: rtl8723bs: core: Ending line with argument
In reply to Beatriz Martins de CarvalhoCleans up checks of "Lines should not end with a '('" with argument present in next line in file rtw_ap.c
--- drivers/staging/rtl8723bs/core/rtw_ap.c | 98 ++++++++++--------------- 1 file changed, 40 insertions(+), 58 deletions(-)
drivers/staging/rtl8723bs/core/rtw_ap.c +40 -58
@@ -67,11 +67,10 @@ static void update_BCNTIM(struct adapter *padapter) tim_bitmap_le =cpu_to_le16 (pstapriv->tim_bitmap); - p =rtw_get_ie ( - pie + _FIXED_IE_LENGTH_, -WLAN_EID_TIM , - &tim_ielen, - pnetwork_mlmeext->IELength - _FIXED_IE_LENGTH_ + p =rtw_get_ie (pie + _FIXED_IE_LENGTH_, +WLAN_EID_TIM , + &tim_ielen, + pnetwork_mlmeext->IELength - _FIXED_IE_LENGTH_ );if (p && tim_ielen >0 ) { tim_ielen +=2 ;
@@ -91,20 +90,18 @@ static void update_BCNTIM(struct adapter *padapter) offset = _FIXED_IE_LENGTH_;/* get ssid_ie len */ - p =rtw_get_ie ( - pie + _BEACON_IE_OFFSET_, -WLAN_EID_SSID , - &tmp_len, - (pnetwork_mlmeext->IELength - _BEACON_IE_OFFSET_) + p =rtw_get_ie (pie + _BEACON_IE_OFFSET_, +WLAN_EID_SSID , + &tmp_len, + (pnetwork_mlmeext->IELength - _BEACON_IE_OFFSET_) );if (p) offset += tmp_len +2 ;/* get supported rates len */ - p =rtw_get_ie ( - pie + _BEACON_IE_OFFSET_, -WLAN_EID_SUPP_RATES , &tmp_len, - (pnetwork_mlmeext->IELength - _BEACON_IE_OFFSET_) + p =rtw_get_ie (pie + _BEACON_IE_OFFSET_, +WLAN_EID_SUPP_RATES , &tmp_len, + (pnetwork_mlmeext->IELength - _BEACON_IE_OFFSET_) );if (p) offset += tmp_len +2 ;
@@ -226,14 +223,13 @@ void expire_timeout_chk(struct adapter *padapter)list_del_init (&psta->auth_list); pstapriv->auth_list_cnt--; -DBG_871X ( -"auth expire %02X%02X%02X%02X%02X%02X\n" , - psta->hwaddr[0 ], - psta->hwaddr[1 ], - psta->hwaddr[2 ], - psta->hwaddr[3 ], - psta->hwaddr[4 ], - psta->hwaddr[5 ] +DBG_871X ("auth expire %02X%02X%02X%02X%02X%02X\n" , + psta->hwaddr[0 ], + psta->hwaddr[1 ], + psta->hwaddr[2 ], + psta->hwaddr[3 ], + psta->hwaddr[4 ], + psta->hwaddr[5 ] );spin_unlock_bh (&pstapriv->auth_list_lock);
@@ -307,10 +303,9 @@ void expire_timeout_chk(struct adapter *padapter) }list_del_init (&psta->asoc_list); pstapriv->asoc_list_cnt--; -DBG_871X ( -"asoc expire %pM, state = 0x%x\n" , -MAC_ARG (psta->hwaddr), - psta->state +DBG_871X ("asoc expire %pM, state = 0x%x\n" , +MAC_ARG (psta->hwaddr), + psta->state ); updated =ap_free_sta (padapter, psta, false,WLAN_REASON_DEAUTH_LEAVING ); }else {
@@ -360,17 +355,15 @@ void expire_timeout_chk(struct adapter *padapter) psta->keep_alive_trycnt++;if (ret == _SUCCESS) { -DBG_871X ( -"asoc check, sta(%pM) is alive\n" , -MAC_ARG (psta->hwaddr) +DBG_871X ("asoc check, sta(%pM) is alive\n" , +MAC_ARG (psta->hwaddr) ); psta->expire_to = pstapriv->expire_to; psta->keep_alive_trycnt =0 ;continue ; }else if (psta->keep_alive_trycnt <=3 ) { -DBG_871X ( -"ack check for asoc expire, keep_alive_trycnt =%d\n" , - psta->keep_alive_trycnt); +DBG_871X ("ack check for asoc expire, keep_alive_trycnt =%d\n" , + psta->keep_alive_trycnt); psta->expire_to =1 ;continue ; }
@@ -480,10 +473,9 @@ void update_bmc_sta(struct adapter *padapter)/* prepare for add_RATid */ supportRateNum =rtw_get_rateset_len ((u8 *)&pcur_network->SupportedRates); - network_type =rtw_check_network_type ( - (u8 *)&pcur_network->SupportedRates, - supportRateNum, - pcur_network->Configuration.DSConfig + network_type =rtw_check_network_type ((u8 *)&pcur_network->SupportedRates, + supportRateNum, + pcur_network->Configuration.DSConfig );if (IsSupportedTxCCK (network_type)) { network_type =WIRELESS_11B ;
@@ -711,15 +703,9 @@ static void update_hw_ht_param(struct adapter *padapter)*/ max_AMPDU_len = pmlmeinfo->HT_caps.u.HT_cap_element.AMPDU_para &0x03 ; - min_MPDU_spacing = ( - pmlmeinfo->HT_caps.u.HT_cap_element.AMPDU_para &0x1c - ) >>2 ; + min_MPDU_spacing = (pmlmeinfo->HT_caps.u.HT_cap_element.AMPDU_para &0x1c ) >>2 ; -rtw_hal_set_hwreg ( - padapter, -HW_VAR_AMPDU_MIN_SPACE , - (u8 *)(&min_MPDU_spacing) - ); +rtw_hal_set_hwreg (padapter,HW_VAR_AMPDU_MIN_SPACE , (u8 *)(&min_MPDU_spacing));rtw_hal_set_hwreg (padapter,HW_VAR_AMPDU_FACTOR , (u8 *)(&max_AMPDU_len));
@@ -785,10 +771,8 @@ void start_bss_network(struct adapter *padapter, u8 *pbuf)if (!pmlmepriv->cur_network.join_res) {/* setting only at first time */ /* WEP Key will be set before this function, do not clear CAM. */ -if ( - (psecuritypriv->dot11PrivacyAlgrthm != _WEP40_) && - (psecuritypriv->dot11PrivacyAlgrthm != _WEP104_) - ) +if ((psecuritypriv->dot11PrivacyAlgrthm != _WEP40_) && + (psecuritypriv->dot11PrivacyAlgrthm != _WEP104_))flush_all_cam_entry (padapter);/* clear CAM */ }
@@ -836,11 +820,10 @@ void start_bss_network(struct adapter *padapter, u8 *pbuf) }/* set channel, bwmode */ - p =rtw_get_ie ( - (pnetwork->IEs +sizeof (struct ndis_802_11_fix_ie )), -WLAN_EID_HT_OPERATION , - &ie_len, - (pnetwork->IELength -sizeof (struct ndis_802_11_fix_ie )) + p =rtw_get_ie ((pnetwork->IEs +sizeof (struct ndis_802_11_fix_ie )), +WLAN_EID_HT_OPERATION , + &ie_len, + (pnetwork->IELength -sizeof (struct ndis_802_11_fix_ie )) );if (p && ie_len) { pht_info = (struct HT_info_element *)(p +2 );
@@ -877,11 +860,10 @@ void start_bss_network(struct adapter *padapter, u8 *pbuf) }set_channel_bwmode (padapter, cur_channel, cur_ch_offset, cur_bwmode); -DBG_871X ( -"CH =%d, BW =%d, offset =%d\n" , - cur_channel, - cur_bwmode, - cur_ch_offset +DBG_871X ("CH =%d, BW =%d, offset =%d\n" , + cur_channel, + cur_bwmode, + cur_ch_offset ); pmlmeext->cur_channel = cur_channel; pmlmeext->cur_bwmode = cur_bwmode;
Signature · 1 line
2.25.1
PATCH 3/4 staging: rtl8723bs: core: reorganize characters so the lines are under 100 ch
In reply to Beatriz Martins de CarvalhoCleans up warnings of "line over 100 characters" but avoinding more than 90 characters in file rtw_ap.c
--- drivers/staging/rtl8723bs/core/rtw_ap.c | 22 ++++++++++++++-------- 1 file changed, 14 insertions(+), 8 deletions(-)
drivers/staging/rtl8723bs/core/rtw_ap.c +14 -8
@@ -278,11 +278,13 @@ void expire_timeout_chk(struct adapter *padapter)if (psta->state &WIFI_SLEEP_STATE ) {if (!(psta->state &WIFI_STA_ALIVE_CHK_STATE )) { -/* to check if alive by another methods if station is at ps mode. */ +/* to check if alive by another methods */ +/* if station is at ps mode. */ psta->expire_to = pstapriv->expire_to; psta->state |=WIFI_STA_ALIVE_CHK_STATE ; -/* DBG_871X("alive chk, sta:%pM is at ps mode!\n", MAC_ARG(psta->hwaddr)); */ +/* DBG_871X("alive chk, sta:%pM is at ps */ +/* mode!\n", MAC_ARG(psta->hwaddr)); */ /* to update bcn with tim_bitmap for this station */ pstapriv->tim_bitmap |=BIT (psta->aid);
@@ -309,7 +311,8 @@ void expire_timeout_chk(struct adapter *padapter) ); updated =ap_free_sta (padapter, psta, false,WLAN_REASON_DEAUTH_LEAVING ); } else { - /* TODO: Aging mechanism to digest frames in sleep_q to avoid running out of xmitframe */ + /* TODO: Aging mechanism to digest frames in sleep_q to */ + /* avoid running out of xmitframe */ if (psta->sleepq_len > (NR_XMITFRAME / pstapriv->asoc_list_cnt) && padapter->xmitpriv.free_xmitframe_cnt < (( NR_XMITFRAME / pstapriv->asoc_list_cnt
@@ -375,7 +378,8 @@ void expire_timeout_chk(struct adapter *padapter)if (list_empty (&psta->asoc_list) == false) {list_del_init (&psta->asoc_list); pstapriv->asoc_list_cnt--; - updated =ap_free_sta (padapter, psta, false,WLAN_REASON_DEAUTH_LEAVING ); + updated =ap_free_sta (padapter, psta, false, +WLAN_REASON_DEAUTH_LEAVING ); }spin_unlock_bh (&pstapriv->asoc_list_lock); }
@@ -469,7 +473,8 @@ void update_bmc_sta(struct adapter *padapter)memset ((void *)&psta->sta_stats,0 ,sizeof (struct stainfo_stats )); -/* psta->dot118021XPrivacy = _NO_PRIVACY_;//!!! remove it, because it has been set before this. */ +/* psta->dot118021XPrivacy = _NO_PRIVACY_;//!!! remove it, */ +/* because it has been set before this. */ /* prepare for add_RATid */ supportRateNum =rtw_get_rateset_len ((u8 *)&pcur_network->SupportedRates);
@@ -748,8 +753,8 @@ void start_bss_network(struct adapter *padapter, u8 *pbuf) cur_ch_offset =HAL_PRIME_CHNL_OFFSET_DONT_CARE ;/* check if there is wps ie, */ -/* if there is wpsie in beacon, the hostapd will update beacon twice when stating hostapd, */ -/* and at first time the security ie (RSN/WPA IE) will not include in beacon. */ +/* if there is wpsie in beacon, the hostapd will update beacon twice when stating */ +/* hostapd, and at first time the security ie (RSN/WPA IE) will not include in beacon. */ if (!rtw_get_wps_ie (pnetwork->IEs + _FIXED_IE_LENGTH_, pnetwork->IELength - _FIXED_IE_LENGTH_,NULL ,NULL )) pmlmeext->bstart_bss = true;
@@ -1117,7 +1122,8 @@ int rtw_check_beacon_data(struct adapter *padapter, u8 *pbuf, int len) *(p +8 ) |=BIT (7 );/* QoS Info, support U-APSD */ -/* disable all ACM bits since the WMM admission control is not supported */ +/* disable all ACM bits since the WMM admission */ +/* control is not supported */ *(p +10 ) &= ~BIT (4 );/* BE */ *(p +14 ) &= ~BIT (4 );/* BK */ *(p +18 ) &= ~BIT (4 );/* VI */
Signature · 1 line
2.25.1
Greg KH
maintainerRe: [PATCH 3/4] staging: rtl8723bs: core: reorganize characters so the lines are under 100 ch
Quoted 15 lines · Beatriz Martins de Carvalho
Cleans up warnings of "line over 100 characters" but avoinding more than 90 characters in file
rtw_ap.cSigned-off-by Beatriz Martins de Carvalho <[email protected]>--- drivers/staging/rtl8723bs/core/rtw_ap.c | 22 ++++++++++++++-------- 1 file changed, 14 insertions(+), 8 deletions(-)drivers/staging/rtl8723bs/core/rtw_ap.c +0
-0@@ -278,11 +278,13 @@ void expire_timeout_chk(struct adapter *padapter)if (psta->state &WIFI_SLEEP_STATE ) {
drivers/staging/rtl8723bs/core/rtw_ap.c void expire_timeout_chk(struct adapter *padapter) · line 287
Quoted 10 lines
drivers/staging/rtl8723bs/core/rtw_ap.c +4
-2if (!(psta->state &WIFI_STA_ALIVE_CHK_STATE )) { -/* to check if alive by another methods if station is at ps mode. */ +/* to check if alive by another methods */ +/* if station is at ps mode. */ psta->expire_to = pstapriv->expire_to; psta->state |=WIFI_STA_ALIVE_CHK_STATE ; -/* DBG_871X("alive chk, sta:%pM is at ps mode!\n", MAC_ARG(psta->hwaddr)); */ +/* DBG_871X("alive chk, sta:%pM is at ps */ +/* mode!\n", MAC_ARG(psta->hwaddr)); */
You just wrapped a code line :(
Just remove it, it's not needed.
Quoted 24 lines
drivers/staging/rtl8723bs/core/rtw_ap.c +4
-2/* to update bcn with tim_bitmap for this station */ pstapriv->tim_bitmap |=BIT (psta->aid);@@ -309,7 +311,8 @@ void expire_timeout_chk(struct adapter *padapter) ); updated =ap_free_sta (padapter, psta, false,WLAN_REASON_DEAUTH_LEAVING ); } else { - /* TODO: Aging mechanism to digest frames in sleep_q to avoid running out of xmitframe */ + /* TODO: Aging mechanism to digest frames in sleep_q to */ + /* avoid running out of xmitframe */ if (psta->sleepq_len > (NR_XMITFRAME / pstapriv->asoc_list_cnt) && padapter->xmitpriv.free_xmitframe_cnt < (( NR_XMITFRAME / pstapriv->asoc_list_cnt@@ -375,7 +378,8 @@ void expire_timeout_chk(struct adapter *padapter)if (list_empty (&psta->asoc_list) == false) {list_del_init (&psta->asoc_list); pstapriv->asoc_list_cnt--; - updated =ap_free_sta (padapter, psta, false,WLAN_REASON_DEAUTH_LEAVING ); + updated =ap_free_sta (padapter, psta, false, +WLAN_REASON_DEAUTH_LEAVING ); }spin_unlock_bh (&pstapriv->asoc_list_lock); }
drivers/staging/rtl8723bs/core/rtw_ap.c void update_bmc_sta(struct adapter *padapter) · line 477
Quoted 6 lines
drivers/staging/rtl8723bs/core/rtw_ap.c +2
-1@@ -469,7 +473,8 @@ void update_bmc_sta(struct adapter *padapter)memset ((void *)&psta->sta_stats,0 ,sizeof (struct stainfo_stats )); -/* psta->dot118021XPrivacy = _NO_PRIVACY_;//!!! remove it, because it has been set before this. */ +/* psta->dot118021XPrivacy = _NO_PRIVACY_;//!!! remove it, */ +/* because it has been set before this. */
Again, look at what you are changing to see if it makes sense.
drivers/staging/rtl8723bs/core/rtw_ap.c void start_bss_network(struct adapter *padapter, u8 *pbuf) · line 757
Quoted 11 lines
drivers/staging/rtl8723bs/core/rtw_ap.c +2
-2/* prepare for add_RATid */ supportRateNum =rtw_get_rateset_len ((u8 *)&pcur_network->SupportedRates);@@ -748,8 +753,8 @@ void start_bss_network(struct adapter *padapter, u8 *pbuf) cur_ch_offset =HAL_PRIME_CHNL_OFFSET_DONT_CARE ;/* check if there is wps ie, */ -/* if there is wpsie in beacon, the hostapd will update beacon twice when stating hostapd, */ -/* and at first time the security ie (RSN/WPA IE) will not include in beacon. */ +/* if there is wpsie in beacon, the hostapd will update beacon twice when stating */ +/* hostapd, and at first time the security ie (RSN/WPA IE) will not include in beacon. */
These changes do not look correct, you made them longer?
thanks,
greg k-h
Re: [PATCH 3/4] staging: rtl8723bs: core: reorganize characters so the lines are under 100 ch
Em 06/04/21 13:13, Greg KH escreveu:
Quoted 23 lines · Beatriz Martins de Carvalho
Quoted 22 lines
Cleans up warnings of "line over 100 characters" but avoinding more than 90 characters in file
rtw_ap.cSigned-off-by Beatriz Martins de Carvalho <[email protected]>--- drivers/staging/rtl8723bs/core/rtw_ap.c | 22 ++++++++++++++-------- 1 file changed, 14 insertions(+), 8 deletions(-)drivers/staging/rtl8723bs/core/rtw_ap.c +2
-1@@ -278,11 +278,13 @@ void expire_timeout_chk(struct adapter *padapter)if (psta->state &WIFI_SLEEP_STATE ) {if (!(psta->state &WIFI_STA_ALIVE_CHK_STATE )) { -/* to check if alive by another methods if station is at ps mode. */ +/* to check if alive by another methods */ +/* if station is at ps mode. */ psta->expire_to = pstapriv->expire_to; psta->state |=WIFI_STA_ALIVE_CHK_STATE ;
Quoted 6 lines
drivers/staging/rtl8723bs/core/rtw_ap.c void expire_timeout_chk(struct adapter *padapter) · line 287
Quoted 3 lines
drivers/staging/rtl8723bs/core/rtw_ap.c +2
-1-/* DBG_871X("alive chk, sta:%pM is at ps mode!\n", MAC_ARG(psta->hwaddr)); */ +/* DBG_871X("alive chk, sta:%pM is at ps */ +/* mode!\n", MAC_ARG(psta->hwaddr)); */ You just wrapped a code line :(
Just remove it, it's not needed.
Sorry! Yesterday I didn't realize that it was a code line. I will remove it.
Quoted 27 lines
Quoted 27 lines
drivers/staging/rtl8723bs/core/rtw_ap.c +4
-2/* to update bcn with tim_bitmap for this station */ pstapriv->tim_bitmap |=BIT (psta->aid);@@ -309,7 +311,8 @@ void expire_timeout_chk(struct adapter *padapter) ); updated =ap_free_sta (padapter, psta, false,WLAN_REASON_DEAUTH_LEAVING ); } else { - /* TODO: Aging mechanism to digest frames in sleep_q to avoid running out of xmitframe */ + /* TODO: Aging mechanism to digest frames in sleep_q to */ + /* avoid running out of xmitframe */ if (psta->sleepq_len > (NR_XMITFRAME / pstapriv->asoc_list_cnt) && padapter->xmitpriv.free_xmitframe_cnt < (( NR_XMITFRAME / pstapriv->asoc_list_cnt@@ -375,7 +378,8 @@ void expire_timeout_chk(struct adapter *padapter)if (list_empty (&psta->asoc_list) == false) {list_del_init (&psta->asoc_list); pstapriv->asoc_list_cnt--; - updated =ap_free_sta (padapter, psta, false,WLAN_REASON_DEAUTH_LEAVING ); + updated =ap_free_sta (padapter, psta, false, +WLAN_REASON_DEAUTH_LEAVING ); }spin_unlock_bh (&pstapriv->asoc_list_lock); }@@ -469,7 +473,8 @@ void update_bmc_sta(struct adapter *padapter)
Quoted 6 lines
drivers/staging/rtl8723bs/core/rtw_ap.c void update_bmc_sta(struct adapter *padapter) · line 477
Quoted 5 lines
drivers/staging/rtl8723bs/core/rtw_ap.c +2
-1memset ((void *)&psta->sta_stats,0 ,sizeof (struct stainfo_stats )); -/* psta->dot118021XPrivacy = _NO_PRIVACY_;//!!! remove it, because it has been set before this. */ +/* psta->dot118021XPrivacy = _NO_PRIVACY_;//!!! remove it, */ +/* because it has been set before this. */ Again, look at what you are changing to see if it makes sense.
Yesterday had to make sense, but now I saw that was wrong. I will remove it.
Quoted 6 lines
Quoted 6 lines
drivers/staging/rtl8723bs/core/rtw_ap.c +0
-0/* prepare for add_RATid */ supportRateNum =rtw_get_rateset_len ((u8 *)&pcur_network->SupportedRates);@@ -748,8 +753,8 @@ void start_bss_network(struct adapter *padapter, u8 *pbuf) cur_ch_offset =HAL_PRIME_CHNL_OFFSET_DONT_CARE ;
Quoted 6 lines
drivers/staging/rtl8723bs/core/rtw_ap.c void start_bss_network(struct adapter *padapter, u8 *pbuf) · line 757
Quoted 5 lines
drivers/staging/rtl8723bs/core/rtw_ap.c +2
-2/* check if there is wps ie, */ -/* if there is wpsie in beacon, the hostapd will update beacon twice when stating hostapd, */ -/* and at first time the security ie (RSN/WPA IE) will not include in beacon. */ +/* if there is wpsie in beacon, the hostapd will update beacon twice when stating */ +/* hostapd, and at first time the security ie (RSN/WPA IE) will not include in beacon. */ These changes do not look correct, you made them longer?
No, I only rearranged the block comment, where I sent the last word in the sentence to the next line,
and with that, each sentence stays with less than 100 characters. But I will remove it.
Quoted 2 lines
thanks,
Thank you for to review, once more I will have more attention to my changes.
Quoted 1 line
greg k-h
Beatriz Martins de Carvalho
PATCH 4/4 staging: rtl8723bs: core: align arguments with open parenthesis
In reply to Beatriz Martins de CarvalhoCleans up checks of "Alignment should match open parenthesis" in file rtw_ap.c
--- drivers/staging/rtl8723bs/core/rtw_ap.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)
drivers/staging/rtl8723bs/core/rtw_ap.c +8 -8
@@ -439,7 +439,7 @@ void add_RATid(struct adapter *padapter, struct sta_info *psta, u8 rssi_level) arg[3 ] = psta->init_rate;DBG_871X ("%s => mac_id:%d , raid:%d , shortGIrate =%d, bitmap = 0x%x\n" , - __func__, psta->mac_id, psta->raid, shortGIrate, tx_ra_bitmap); + __func__, psta->mac_id, psta->raid, shortGIrate, tx_ra_bitmap);rtw_hal_add_ra_tid (padapter, tx_ra_bitmap, arg, rssi_level); }else {
@@ -512,7 +512,7 @@ void update_bmc_sta(struct adapter *padapter) arg[3 ] = psta->init_rate;DBG_871X ("%s => mac_id:%d , raid:%d , bitmap = 0x%x\n" , - __func__, psta->mac_id, psta->raid, tx_ra_bitmap); + __func__, psta->mac_id, psta->raid, tx_ra_bitmap);rtw_hal_add_ra_tid (padapter, tx_ra_bitmap, arg,0 ); }
@@ -605,14 +605,14 @@ void update_sta_info_apmode(struct adapter *padapter, struct sta_info *psta)/* B0 Config LDPC Coding Capability */ if (TEST_FLAG (phtpriv_ap->ldpc_cap,LDPC_HT_ENABLE_TX ) && -GET_HT_CAPABILITY_ELE_LDPC_CAP ((u8 *)(&phtpriv_sta->ht_cap))) { +GET_HT_CAPABILITY_ELE_LDPC_CAP ((u8 *)(&phtpriv_sta->ht_cap))) {SET_FLAG (cur_ldpc_cap, (LDPC_HT_ENABLE_TX |LDPC_HT_CAP_TX ));DBG_871X ("Enable HT Tx LDPC for STA(%d)\n" , psta->aid); }/* B7 B8 B9 Config STBC setting */ if (TEST_FLAG (phtpriv_ap->stbc_cap,STBC_HT_ENABLE_TX ) && -GET_HT_CAPABILITY_ELE_RX_STBC ((u8 *)(&phtpriv_sta->ht_cap))) { +GET_HT_CAPABILITY_ELE_RX_STBC ((u8 *)(&phtpriv_sta->ht_cap))) {SET_FLAG (cur_stbc_cap, (STBC_HT_ENABLE_TX |STBC_HT_CAP_TX ));DBG_871X ("Enable HT Tx STBC for STA(%d)\n" , psta->aid); }
@@ -1176,7 +1176,7 @@ int rtw_check_beacon_data(struct adapter *padapter, u8 *pbuf, int len) );if ((psecuritypriv->wpa_pairwise_cipher &WPA_CIPHER_CCMP ) || - (psecuritypriv->wpa2_pairwise_cipher &WPA_CIPHER_CCMP )) { + (psecuritypriv->wpa2_pairwise_cipher &WPA_CIPHER_CCMP )) { pht_cap->ampdu_params_info |= (IEEE80211_HT_CAP_AMPDU_DENSITY & (0x07 <<2 )); }else { pht_cap->ampdu_params_info |= (IEEE80211_HT_CAP_AMPDU_DENSITY &0x00 );
@@ -1233,7 +1233,7 @@ int rtw_check_beacon_data(struct adapter *padapter, u8 *pbuf, int len) pmlmepriv->htpriv.ht_option = false;if ((psecuritypriv->wpa2_pairwise_cipher &WPA_CIPHER_TKIP ) || - (psecuritypriv->wpa_pairwise_cipher &WPA_CIPHER_TKIP )) { + (psecuritypriv->wpa_pairwise_cipher &WPA_CIPHER_TKIP )) {/* todo: */ /* ht_cap = false; */ }
@@ -1820,7 +1820,7 @@ static int rtw_ht_operation_update(struct adapter *padapter) }DBG_871X ("%s new operation mode = 0x%X changes =%d\n" , - __func__, pmlmepriv->ht_op_mode, op_mode_changes); + __func__, pmlmepriv->ht_op_mode, op_mode_changes);return op_mode_changes; }
@@ -1865,7 +1865,7 @@ void bss_cap_update_on_sta_join(struct adapter *padapter, struct sta_info *psta) pmlmepriv->num_sta_no_short_preamble++;if ((pmlmeext->cur_wireless_mode >WIRELESS_11B ) && - (pmlmepriv->num_sta_no_short_preamble ==1 )) { + (pmlmepriv->num_sta_no_short_preamble ==1 )) { beacon_updated = true;update_beacon (padapter,0xFF ,NULL , true); }
Signature · 1 line
2.25.1
Re: [Outreachy kernel] [PATCH 4/4] staging: rtl8723bs: core: align arguments with open parenthesis
Quoted 31 lines · Beatriz Martins de Carvalho
Cleans up checks of "Alignment should match open parenthesis" in file
rtw_ap.cSigned-off-by Beatriz Martins de Carvalho <[email protected]>--- drivers/staging/rtl8723bs/core/rtw_ap.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)drivers/staging/rtl8723bs/core/rtw_ap.c +2
-2@@ -439,7 +439,7 @@ void add_RATid(struct adapter *padapter, struct sta_info *psta, u8 rssi_level) arg[3 ] = psta->init_rate;DBG_871X ("%s => mac_id:%d , raid:%d , shortGIrate =%d, bitmap = 0x%x\n" , - __func__, psta->mac_id, psta->raid, shortGIrate, tx_ra_bitmap); + __func__, psta->mac_id, psta->raid, shortGIrate, tx_ra_bitmap);rtw_hal_add_ra_tid (padapter, tx_ra_bitmap, arg, rssi_level); }else {@@ -512,7 +512,7 @@ void update_bmc_sta(struct adapter *padapter) arg[3 ] = psta->init_rate;DBG_871X ("%s => mac_id:%d , raid:%d , bitmap = 0x%x\n" , - __func__, psta->mac_id, psta->raid, tx_ra_bitmap); + __func__, psta->mac_id, psta->raid, tx_ra_bitmap);rtw_hal_add_ra_tid (padapter, tx_ra_bitmap, arg,0 ); }
drivers/staging/rtl8723bs/core/rtw_ap.c void update_sta_info_apmode(struct adapter *padapter, struct sta_info *psta) · line 611
Quoted 8 lines
drivers/staging/rtl8723bs/core/rtw_ap.c +1
-1@@ -605,14 +605,14 @@ void update_sta_info_apmode(struct adapter *padapter, struct sta_info *psta)/* B0 Config LDPC Coding Capability */ if (TEST_FLAG (phtpriv_ap->ldpc_cap,LDPC_HT_ENABLE_TX ) && -GET_HT_CAPABILITY_ELE_LDPC_CAP ((u8 *)(&phtpriv_sta->ht_cap))) { +GET_HT_CAPABILITY_ELE_LDPC_CAP ((u8 *)(&phtpriv_sta->ht_cap))) {SET_FLAG (cur_ldpc_cap, (LDPC_HT_ENABLE_TX |LDPC_HT_CAP_TX ));DBG_871X ("Enable HT Tx LDPC for STA(%d)\n" , psta->aid); }
TEST_FLAG and SET_FLAG are not standard for the kernel, don't do anything very interesting, and aren't even used consistently in this file. Maybe you could get rid of them completely from the driver. In another patch, of course.
julia
Quoted 51 lines
drivers/staging/rtl8723bs/core/rtw_ap.c +5
-6/* B7 B8 B9 Config STBC setting */ if (TEST_FLAG (phtpriv_ap->stbc_cap,STBC_HT_ENABLE_TX ) && -GET_HT_CAPABILITY_ELE_RX_STBC ((u8 *)(&phtpriv_sta->ht_cap))) { +GET_HT_CAPABILITY_ELE_RX_STBC ((u8 *)(&phtpriv_sta->ht_cap))) {SET_FLAG (cur_stbc_cap, (STBC_HT_ENABLE_TX |STBC_HT_CAP_TX ));DBG_871X ("Enable HT Tx STBC for STA(%d)\n" , psta->aid); }@@ -1176,7 +1176,7 @@ int rtw_check_beacon_data(struct adapter *padapter, u8 *pbuf, int len) );if ((psecuritypriv->wpa_pairwise_cipher &WPA_CIPHER_CCMP ) || - (psecuritypriv->wpa2_pairwise_cipher &WPA_CIPHER_CCMP )) { + (psecuritypriv->wpa2_pairwise_cipher &WPA_CIPHER_CCMP )) { pht_cap->ampdu_params_info |= (IEEE80211_HT_CAP_AMPDU_DENSITY & (0x07 <<2 )); }else { pht_cap->ampdu_params_info |= (IEEE80211_HT_CAP_AMPDU_DENSITY &0x00 );@@ -1233,7 +1233,7 @@ int rtw_check_beacon_data(struct adapter *padapter, u8 *pbuf, int len) pmlmepriv->htpriv.ht_option = false;if ((psecuritypriv->wpa2_pairwise_cipher &WPA_CIPHER_TKIP ) || - (psecuritypriv->wpa_pairwise_cipher &WPA_CIPHER_TKIP )) { + (psecuritypriv->wpa_pairwise_cipher &WPA_CIPHER_TKIP )) {/* todo: */ /* ht_cap = false; */ }@@ -1820,7 +1820,7 @@ static int rtw_ht_operation_update(struct adapter *padapter) }DBG_871X ("%s new operation mode = 0x%X changes =%d\n" , - __func__, pmlmepriv->ht_op_mode, op_mode_changes); + __func__, pmlmepriv->ht_op_mode, op_mode_changes);return op_mode_changes; }@@ -1865,7 +1865,7 @@ void bss_cap_update_on_sta_join(struct adapter *padapter, struct sta_info *psta) pmlmepriv->num_sta_no_short_preamble++;if ((pmlmeext->cur_wireless_mode >WIRELESS_11B ) && - (pmlmepriv->num_sta_no_short_preamble ==1 )) { + (pmlmepriv->num_sta_no_short_preamble ==1 )) { beacon_updated = true;update_beacon (padapter,0xFF ,NULL , true); } --2.25.1
--
You received this message because you are subscribed to the Google Groups "outreachy-kernel" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [email protected].
To view this discussion on the web visit https://groups.google.com/d/msgid/outreachy-kernel/00250c746ed850f6a73ff0ad4c1735cbd019b58f.1617641790.git.martinsdecarvalhobeatriz%40gmail.com.