Skip to contentSkip to conversation

PCI: Prefer of_device_get_match_data() over of_match_device()

PATCH Applied Fan Fei 2 participants 10 messages Nov 23, 2021 – Dec 8, 2021

Subsystems (8)
lore
Share & tools
lore

Fan Fei

author
#0 lore raw

cover PCI: Prefer of_device_get_match_data() over of_match_device()

Some drivers use of_match_device() in probe(), which returns a "struct of_device_id *". They need only the of_device_id.data member, so replace of_device_get_match_data() with of_match_device().

Fan Fei (7):
PCI: altera: Prefer of_device_get_match_data() over of_match_device()
PCI: cadence: Prefer of_device_get_match_data() over of_match_device()
PCI: kirin: Prefer of_device_get_match_data() over of_match_device()
PCI: dra7xx: Prefer of_device_get_match_data() over of_match_device()
PCI: keystone: Prefer of_device_get_match_data() over
of_match_device()
PCI: artpec6: Prefer of_device_get_match_data() over of_match_device()
PCI: dwc: Prefer of_device_get_match_data() over of_device_device()

 drivers/pci/controller/cadence/pcie-cadence-plat.c | 6 ++----
 drivers/pci/controller/dwc/pci-dra7xx.c            | 6 ++----
 drivers/pci/controller/dwc/pci-keystone.c          | 4 +---
 drivers/pci/controller/dwc/pcie-artpec6.c          | 6 ++----
 drivers/pci/controller/dwc/pcie-designware-plat.c  | 6 ++----
 drivers/pci/controller/dwc/pcie-kirin.c            | 6 ++----
 drivers/pci/controller/pcie-altera.c               | 8 ++++----
 7 files changed, 15 insertions(+), 27 deletions(-)
Signature · 1 line
2.25.1
author
#1 lore raw

PATCH 1/7 PCI: altera: Prefer of_device_get_match_data() over of_match_device()

The altera PCI controller driver only needs "struct altera_pcie_data *" during probe(). Replace of_match_device(), which returns "struct of_device_id *", with of_device_get_match_data(), to get "struct altera_pcie_data *".

---
 drivers/pci/controller/pcie-altera.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/pci/controller/pcie-altera.c +4 -4
index 2513e9363236..98ada2e20e02 100644
@@ -767,7 +767,7 @@ static int altera_pcie_probe(struct platform_device *pdev)
 	struct altera_pcie *pcie;
 	struct pci_host_bridge *bridge;
 	int ret;
-	const struct of_device_id *match;
+	const struct altera_pcie_data *data;
 
 	bridge = devm_pci_alloc_host_bridge(dev, sizeof(*pcie));
 	if (!bridge)
@@ -777,11 +777,11 @@ static int altera_pcie_probe(struct platform_device *pdev)
 	pcie->pdev = pdev;
 	platform_set_drvdata(pdev, pcie);
 
-	match = of_match_device(altera_pcie_of_match, &pdev->dev);
-	if (!match)
+	data = of_device_get_match_data(&pdev->dev);
+	if (!data)
 		return -ENODEV;
 
-	pcie->pcie_data = match->data;
+	pcie->pcie_data = data;
 
 	ret = altera_pcie_parse_dt(pcie);
 	if (ret) {
Signature · 1 line
2.25.1
author
#2 lore raw

PATCH 2/7 PCI: cadence: Prefer of_device_get_match_data() over of_match_device()

In reply to Fan Fei

The cadence PCI controller driver only needs
"struct cdns_plat_pcie_of_data *" during probe(). Replace of_match_device(), which returns "struct of_device_id *", with of_device_get_match_data(), to get "struct cdns_plat_pcie_of_data *" directly.

---
 drivers/pci/controller/cadence/pcie-cadence-plat.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)
drivers/pci/controller/cadence/pcie-cadence-plat.c +2 -4
index a224afadbcc0..bac0541317c1 100644
@@ -45,7 +45,6 @@ static int cdns_plat_pcie_probe(struct platform_device *pdev)
 {
 	const struct cdns_plat_pcie_of_data *data;
 	struct cdns_plat_pcie *cdns_plat_pcie;
-	const struct of_device_id *match;
 	struct device *dev = &pdev->dev;
 	struct pci_host_bridge *bridge;
 	struct cdns_pcie_ep *ep;
@@ -54,11 +53,10 @@ static int cdns_plat_pcie_probe(struct platform_device *pdev)
 	bool is_rc;
 	int ret;
 
-	match = of_match_device(cdns_plat_pcie_of_match, dev);
-	if (!match)
+	data = of_device_get_match_data(dev);
+	if (!data)
 		return -EINVAL;
 
-	data = (struct cdns_plat_pcie_of_data *)match->data;
 	is_rc = data->is_rc;
 
 	pr_debug(" Started %s with is_rc: %d\n", __func__, is_rc);
Signature · 1 line
2.25.1
author
#3 lore raw

PATCH 3/7 PCI: kirin: Prefer of_device_get_match_data() over of_match_device()

In reply to Fan Fei

The kirin PCI controller driver only needs "enum pcie_kirin_phy_type" during probe(). Replace of_match_device(), which returns "struct of_device_id *", with of_device_get_match_data(), and cast to long type, referring "enum pcie_kirin_phy_type".

---
 drivers/pci/controller/dwc/pcie-kirin.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)
drivers/pci/controller/dwc/pcie-kirin.c +2 -4
index 095afbccf9c1..8d6e241bd171 100644
@@ -773,7 +773,6 @@ static const struct of_device_id kirin_pcie_match[] = {
 static int kirin_pcie_probe(struct platform_device *pdev)
 {
 	enum pcie_kirin_phy_type phy_type;
-	const struct of_device_id *of_id;
 	struct device *dev = &pdev->dev;
 	struct kirin_pcie *kirin_pcie;
 	struct dw_pcie *pci;
@@ -784,13 +783,12 @@ static int kirin_pcie_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	of_id = of_match_device(kirin_pcie_match, dev);
-	if (!of_id) {
+	phy_type = (long)of_device_get_match_data(dev);
+	if (!phy_type) {
 		dev_err(dev, "OF data missing\n");
 		return -EINVAL;
 	}
 
-	phy_type = (long)of_id->data;
 
 	kirin_pcie = devm_kzalloc(dev, sizeof(struct kirin_pcie), GFP_KERNEL);
 	if (!kirin_pcie)
Signature · 1 line
2.25.1
author
#4 lore raw

PATCH 4/7 PCI: dra7xx: Prefer of_device_get_match_data() over of_match_device()

In reply to Fan Fei

The dra7xx PCI controller driver only needs "struct dra7xx_pcie_of_data *" during probe(). Replace of_match_device(), which returns "struct of_device_id *", with of_device_get_match_data(), to get "struct dra7xx_pcie_of_data *" directly.

---
 drivers/pci/controller/dwc/pci-dra7xx.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)
drivers/pci/controller/dwc/pci-dra7xx.c +2 -4
index a4221f6f3629..12d19183e746 100644
@@ -697,16 +697,14 @@ static int dra7xx_pcie_probe(struct platform_device *pdev)
 	struct device_node *np = dev->of_node;
 	char name[10];
 	struct gpio_desc *reset;
-	const struct of_device_id *match;
 	const struct dra7xx_pcie_of_data *data;
 	enum dw_pcie_device_mode mode;
 	u32 b1co_mode_sel_mask;
 
-	match = of_match_device(of_match_ptr(of_dra7xx_pcie_match), dev);
-	if (!match)
+	data = of_device_get_match_data(dev);
+	if (!data)
 		return -EINVAL;
 
-	data = (struct dra7xx_pcie_of_data *)match->data;
 	mode = (enum dw_pcie_device_mode)data->mode;
 	b1co_mode_sel_mask = data->b1co_mode_sel_mask;
 
Signature · 1 line
2.25.1
author
#5 lore raw

PATCH 5/7 PCI: keystone: Prefer of_device_get_match_data() over of_match_device()

In reply to Fan Fei

The keystone PCI controller driver only needs "struct ks_pcie_of_data *" during probe(). Replace of_match_device(), which returns "struct of_device_id *", with of_device_get_match_data(), to get "struct ks_pcie_of_data *" directly.

---
 drivers/pci/controller/dwc/pci-keystone.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)
drivers/pci/controller/dwc/pci-keystone.c +1 -3
index 865258d8c53c..bf4755cb6c50 100644
@@ -1087,7 +1087,6 @@ static int __init ks_pcie_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct device_node *np = dev->of_node;
 	const struct ks_pcie_of_data *data;
-	const struct of_device_id *match;
 	enum dw_pcie_device_mode mode;
 	struct dw_pcie *pci;
 	struct keystone_pcie *ks_pcie;
@@ -1104,8 +1103,7 @@ static int __init ks_pcie_probe(struct platform_device *pdev)
 	int irq;
 	int i;
 
-	match = of_match_device(of_match_ptr(ks_pcie_of_match), dev);
-	data = (struct ks_pcie_of_data *)match->data;
+	data = of_device_get_match_data(dev);
 	if (!data)
 		return -EINVAL;
 
Signature · 1 line
2.25.1
author
#6 lore raw

PATCH 6/7 PCI: artpec6: Prefer of_device_get_match_data() over of_match_device()

In reply to Fan Fei

The artpec6 PCI controller driver only needs "struct artpec_pcie_of_data *" during probe(). Replace of_match_device(), which returns "struct of_device_id *", with of_device_get_match_data(), to get "struct artpec_pcie_of_data *" directly.

---
 drivers/pci/controller/dwc/pcie-artpec6.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)
drivers/pci/controller/dwc/pcie-artpec6.c +2 -4
index c91fc1954432..2f15441770e1 100644
@@ -380,17 +380,15 @@ static int artpec6_pcie_probe(struct platform_device *pdev)
 	struct dw_pcie *pci;
 	struct artpec6_pcie *artpec6_pcie;
 	int ret;
-	const struct of_device_id *match;
 	const struct artpec_pcie_of_data *data;
 	enum artpec_pcie_variants variant;
 	enum dw_pcie_device_mode mode;
 	u32 val;
 
-	match = of_match_device(artpec6_pcie_of_match, dev);
-	if (!match)
+	data = of_device_get_match_data(dev);
+	if (!data)
 		return -EINVAL;
 
-	data = (struct artpec_pcie_of_data *)match->data;
 	variant = (enum artpec_pcie_variants)data->variant;
 	mode = (enum dw_pcie_device_mode)data->mode;
 
Signature · 1 line
2.25.1
author
#7 lore raw

PATCH 7/7 PCI: dwc: Prefer of_device_get_match_data() over of_device_device()

In reply to Fan Fei

The dw_plat PCI controller driver only needs
"struct dw_plat_pcie_of_data *" during probe(). Replace of_match_device(), which returns "struct of_device_id *", with of_device_get_match_data(), to get "struct dw_plat_pcie_of_data *" directly.

---
 drivers/pci/controller/dwc/pcie-designware-plat.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)
drivers/pci/controller/dwc/pcie-designware-plat.c +2 -4
index 8851eb161a0e..0c5de87d3cc6 100644
@@ -122,15 +122,13 @@ static int dw_plat_pcie_probe(struct platform_device *pdev)
 	struct dw_plat_pcie *dw_plat_pcie;
 	struct dw_pcie *pci;
 	int ret;
-	const struct of_device_id *match;
 	const struct dw_plat_pcie_of_data *data;
 	enum dw_pcie_device_mode mode;
 
-	match = of_match_device(dw_plat_pcie_of_match, dev);
-	if (!match)
+	data = of_device_get_match_data(dev);
+	if (!data)
 		return -EINVAL;
 
-	data = (struct dw_plat_pcie_of_data *)match->data;
 	mode = (enum dw_pcie_device_mode)data->mode;
 
 	dw_plat_pcie = devm_kzalloc(dev, sizeof(*dw_plat_pcie), GFP_KERNEL);
Signature · 1 line
2.25.1
#8 lore raw
In reply to Fan Fei
Quoted 14 lines · Fan Fei

Some drivers use of_match_device() in probe(), which returns a "struct of_device_id *". They need only the of_device_id.data member, so replace of_device_get_match_data() with of_match_device().

Fan Fei (7):
PCI: altera: Prefer of_device_get_match_data() over of_match_device()
PCI: cadence: Prefer of_device_get_match_data() over of_match_device()
PCI: kirin: Prefer of_device_get_match_data() over of_match_device()
PCI: dra7xx: Prefer of_device_get_match_data() over of_match_device()
PCI: keystone: Prefer of_device_get_match_data() over
of_match_device()
PCI: artpec6: Prefer of_device_get_match_data() over of_match_device()
PCI: dwc: Prefer of_device_get_match_data() over of_device_device()

Quoted 8 lines
 drivers/pci/controller/cadence/pcie-cadence-plat.c | 6 ++----
 drivers/pci/controller/dwc/pci-dra7xx.c            | 6 ++----
 drivers/pci/controller/dwc/pci-keystone.c          | 4 +---
 drivers/pci/controller/dwc/pcie-artpec6.c          | 6 ++----
 drivers/pci/controller/dwc/pcie-designware-plat.c  | 6 ++----
 drivers/pci/controller/dwc/pcie-kirin.c            | 6 ++----
 drivers/pci/controller/pcie-altera.c               | 8 ++++----
 7 files changed, 15 insertions(+), 27 deletions(-)

Applied to pci/driver-cleanup for v5.17, thank you, Fan!

#9 lore raw
Quoted 24 lines · Bjorn Helgaas
Quoted 14 lines · Fan Fei

Some drivers use of_match_device() in probe(), which returns a "struct of_device_id *". They need only the of_device_id.data member, so replace of_device_get_match_data() with of_match_device().

Fan Fei (7):
PCI: altera: Prefer of_device_get_match_data() over of_match_device()
PCI: cadence: Prefer of_device_get_match_data() over of_match_device()
PCI: kirin: Prefer of_device_get_match_data() over of_match_device()
PCI: dra7xx: Prefer of_device_get_match_data() over of_match_device()
PCI: keystone: Prefer of_device_get_match_data() over
of_match_device()
PCI: artpec6: Prefer of_device_get_match_data() over of_match_device()
PCI: dwc: Prefer of_device_get_match_data() over of_device_device()

Quoted 8 lines
 drivers/pci/controller/cadence/pcie-cadence-plat.c | 6 ++----
 drivers/pci/controller/dwc/pci-dra7xx.c            | 6 ++----
 drivers/pci/controller/dwc/pci-keystone.c          | 4 +---
 drivers/pci/controller/dwc/pcie-artpec6.c          | 6 ++----
 drivers/pci/controller/dwc/pcie-designware-plat.c  | 6 ++----
 drivers/pci/controller/dwc/pcie-kirin.c            | 6 ++----
 drivers/pci/controller/pcie-altera.c               | 8 ++++----
 7 files changed, 15 insertions(+), 27 deletions(-)
Quoted 1 line

Applied to pci/driver-cleanup for v5.17, thank you, Fan!

Also applied the following patch since it's closely related.

commit 667c60afad25 ("PCI: j721e: Drop pointless of_device_get_match_data() cast")

Author: Bjorn Helgaas <[email protected]>
Date:   Wed Dec 8 15:18:20 2021 -0600

PCI: j721e: Drop pointless of_device_get_match_data() cast

of_device_get_match_data() returns "void *", so no cast is needed when assigning the result to a pointer type. Drop the unnecessary cast.

drivers/pci/controller/cadence/pci-j721e.c +1 -1
index 918e11082e6a..0aa1c184bd42 100644
@@ -367,7 +367,7 @@ static int j721e_pcie_probe(struct platform_device *pdev)
 	int ret;
 	int irq;
 
-	data = (struct j721e_pcie_data *)of_device_get_match_data(dev);
+	data = of_device_get_match_data(dev);
 	if (!data)
 		return -EINVAL;