Skip to contentSkip to conversation

mvneta: introduce XDP multi-buffer support

PATCH Superseded Lorenzo Bianconi 3 participants 36 messages Jan 17, 2022 – Jan 19, 2022

Subsystems (13)

v22 of 23 Superseded Latest is v23 →

lore
Share & tools
lore
#0 lore raw

v22 cover mvneta: introduce XDP multi-buffer support

This series introduce XDP multi-frags support. The mvneta driver is the first to support these new "non-linear" xdp_{buff,frame}. Reviewers please focus on how these new types of xdp_{buff,frame} packets traverse the different layers and the layout design. It is on purpose that BPF-helpers are kept simple, as we don't want to expose the internal layout to allow later changes.

The main idea for the new multi-frags layout is to reuse the same structure used for non-linear SKB. This rely on the "skb_shared_info" struct at the end of the first buffer to link together subsequent buffers. Keeping the layout compatible with SKBs is also done to ease and speedup creating a SKB from an xdp_{buff,frame}. Converting xdp_frame to SKB and deliver it to the network stack is shown in patch 05/18 (e.g. cpumaps).

A multi-frags bit (XDP_FLAGS_HAS_FRAGS) has been introduced in the flags field of xdp_{buff,frame} structure to notify the bpf/network layer if this is a xdp multi-frags frame (XDP_FLAGS_HAS_FRAGS set) or not (XDP_FLAGS_HAS_FRAGS not set).
The multi-frags bit will be set by a xdp multi-frags capable driver only for non-linear frames maintaining the capability to receive linear frames without any extra cost since the skb_shared_info structure at the end of the first buffer will be initialized only if XDP_FLAGS_HAS_FRAGS bit is set. Moreover the flags field in xdp_{buff,frame} will be reused even for xdp rx csum offloading in future series.

Typical use cases for this series are:
- Jumbo-frames
- Packet header split (please see Google’s use-case @ NetDevConf 0x14, [0])
- TSO/GRO for XDP_REDIRECT

The three following ebpf helpers (and related selftests) has been introduced:
- bpf_xdp_load_bytes:
This helper is provided as an easy way to load data from a xdp buffer. It can be used to load len bytes from offset from the frame associated to xdp_md, into the buffer pointed by buf.
- bpf_xdp_store_bytes:
Store len bytes from buffer buf into the frame associated to xdp_md, at offset.
- bpf_xdp_get_buff_len:
Return the total frame size (linear + paged parts)

bpf_xdp_adjust_tail and bpf_xdp_copy helpers have been modified to take into account xdp multi-frags frames.
Moreover, similar to skb_header_pointer, we introduced bpf_xdp_pointer utility routine to return a pointer to a given position in the xdp_buff if the requested area (offset + len) is contained in a contiguous memory area otherwise it must be copied in a bounce buffer provided by the caller running bpf_xdp_copy_buf().

BPF_F_XDP_HAS_FRAGS flag has been introduced to notify the kernel the eBPF program fully support xdp multi-frags.
SEC("xdp.frags"), SEC_DEF("xdp.frags/devmap") and SEC_DEF("xdp.frags/cpumap") have been introduced to declare xdp multi-frags support.
The NIC driver is expected to reject an eBPF program if it is running in XDP multi-frags mode and the program does not support XDP multi-frags. In the same way it is not possible to mix xdp multi-frags and xdp legacy programs in a CPUMAP/DEVMAP or tailcall a xdp multi-frags/legacy program from a legacy/multi-frags one.

More info about the main idea behind this approach can be found here [1][2].

Changes since v21:
- rename *_mb in *_frags: e.g:
s/xdp_buff_is_mb/xdp_buff_has_frags
- rely on ASSERT_* and not on CHECK in bpf_xdp_load_bytes/bpf_xdp_store_bytes self-tests
- change new multi.frags SEC definitions to use the following schema:
prog_type.prog_flags/attach_place
- get rid of unnecessary properties in new multi.frags SEC definitions
- rebase on top of bpf-next

Changes since v20:
- rebase to current bpf-next

Changes since v19:
- do not run deprecated bpf_prog_load()
- rely on skb_frag_size_add/skb_frag_size_sub in bpf_xdp_mb_increase_tail/bpf_xdp_mb_shrink_tail
- rely on sinfo->nr_frags in bpf_xdp_mb_shrink_tail to check if the frame has been shrunk to a single-buffer one
- allow XDP_REDIRECT of a xdp-mb frame into a CPUMAP

Changes since v18:
- fix bpf_xdp_copy_buf utility routine when we want to load/store data contained in frag<n>
- add a selftest for bpf_xdp_load_bytes/bpf_xdp_store_bytes when the caller accesses data contained in frag<n> and frag<n+1>

Changes since v17:
- rework bpf_xdp_copy to squash base and frag management
- remove unused variable in bpf_xdp_mb_shrink_tail()
- move bpf_xdp_copy_buf() out of bpf_xdp_pointer()
- add sanity check for len in bpf_xdp_pointer()
- remove EXPORT_SYMBOL for __xdp_return()
- introduce frag_size field in xdp_rxq_info to let the driver specify max value for xdp fragments. frag_size set to 0 means the tail increase of last the fragment is not supported.

Changes since v16:
- do not allow tailcalling a xdp multi-buffer/legacy program from a legacy/multi-buff one.
- do not allow mixing xdp multi-buffer and xdp legacy programs in a CPUMAP/DEVMAP
- add selftests for CPUMAP/DEVMAP xdp mb compatibility
- disable XDP_REDIRECT for xdp multi-buff for the moment
- set max offset value to 0xffff in bpf_xdp_pointer
- use ARG_PTR_TO_UNINIT_MEM and ARG_CONST_SIZE for arg3_type and arg4_type of bpf_xdp_store_bytes/bpf_xdp_load_bytes

Changes since v15:
- let the verifier check buf is not NULL in bpf_xdp_load_bytes/bpf_xdp_store_bytes helpers
- return an error if offset + length is over frame boundaries in bpf_xdp_pointer routine
- introduce BPF_F_XDP_MB flag for bpf_attr to notify the kernel the eBPF program fully supports xdp multi-buffer.
- reject a non XDP multi-buffer program if the driver is running in XDP multi-buffer mode.

Changes since v14:
- intrudce bpf_xdp_pointer utility routine and bpf_xdp_load_bytes/bpf_xdp_store_bytes helpers
- drop bpf_xdp_adjust_data helper
- drop xdp_frags_truesize in skb_shared_info
- explode bpf_xdp_mb_adjust_tail in bpf_xdp_mb_increase_tail and bpf_xdp_mb_shrink_tail

Changes since v13:
- use u32 for xdp_buff/xdp_frame flags field
- rename xdp_frags_tsize in xdp_frags_truesize
- fixed comments

Changes since v12:
- fix bpf_xdp_adjust_data helper for single-buffer use case
- return -EFAULT in bpf_xdp_adjust_{head,tail} in case the data pointers are not properly reset
- collect ACKs from John

Changes since v11:
- add missing static to bpf_xdp_get_buff_len_proto structure
- fix bpf_xdp_adjust_data helper when offset is smaller than linear area length.

Changes since v10:
- move xdp->data to the requested payload offset instead of to the beginning of the fragment in bpf_xdp_adjust_data()

Changes since v9:
- introduce bpf_xdp_adjust_data helper and related selftest
- add xdp_frags_size and xdp_frags_tsize fields in skb_shared_info
- introduce xdp_update_skb_shared_info utility routine in ordere to not reset frags array in skb_shared_info converting from a xdp_buff/xdp_frame to a skb
- simplify bpf_xdp_copy routine

Changes since v8:
- add proper dma unmapping if XDP_TX fails on mvneta for a xdp multi-buff
- switch back to skb_shared_info implementation from previous xdp_shared_info one
- avoid using a bietfield in xdp_buff/xdp_frame since it introduces performance regressions. Tested now on 10G NIC (ixgbe) to verify there are no performance penalties for regular codebase
- add bpf_xdp_get_buff_len helper and remove frame_length field in xdp ctx
- add data_len field in skb_shared_info struct
- introduce XDP_FLAGS_FRAGS_PF_MEMALLOC flag

Changes since v7:
- rebase on top of bpf-next
- fix sparse warnings
- improve comments for frame_length in include/net/xdp.h

Changes since v6:
- the main difference respect to previous versions is the new approach proposed by Eelco to pass full length of the packet to eBPF layer in XDP context
- reintroduce multi-buff support to eBPF kself-tests
- reintroduce multi-buff support to bpf_xdp_adjust_tail helper
- introduce multi-buffer support to bpf_xdp_copy helper
- rebase on top of bpf-next

Changes since v5:
- rebase on top of bpf-next
- initialize mb bit in xdp_init_buff() and drop per-driver initialization
- drop xdp->mb initialization in xdp_convert_zc_to_xdp_frame()
- postpone introduction of frame_length field in XDP ctx to another series
- minor changes

Changes since v4:
- rebase ontop of bpf-next
- introduce xdp_shared_info to build xdp multi-buff instead of using the skb_shared_info struct
- introduce frame_length in xdp ctx
- drop previous bpf helpers
- fix bpf_xdp_adjust_tail for xdp multi-buff
- introduce xdp multi-buff self-tests for bpf_xdp_adjust_tail
- fix xdp_return_frame_bulk for xdp multi-buff

Changes since v3:
- rebase ontop of bpf-next
- add patch 10/13 to copy back paged data from a xdp multi-buff frame to userspace buffer for xdp multi-buff selftests

Changes since v2:
- add throughput measurements
- drop bpf_xdp_adjust_mb_header bpf helper
- introduce selftest for xdp multibuffer
- addressed comments on bpf_xdp_get_frags_count
- introduce xdp multi-buff support to cpumaps

Changes since v1:
- Fix use-after-free in xdp_return_{buff/frame}
- Introduce bpf helpers
- Introduce xdp_mb sample program
- access skb_shared_info->nr_frags only on the last fragment

Changes since RFC:
- squash multi-buffer bit initialization in a single patch
- add mvneta non-linear XDP buff support for tx side

[0] https://netdevconf.info/0x14/session.html?talk-the-path-to-tcp-4k-mtu-and-rx-zerocopy
[1] https://github.com/xdp-project/xdp-project/blob/master/areas/core/xdp-multi-buffer01-design.org
[2] https://netdevconf.info/0x14/session.html?tutorial-add-XDP-support-to-a-NIC-driver (XDPmulti-buffers section)

Eelco Chaudron (3):
bpf: add multi-frags support to the bpf_xdp_adjust_tail() API
bpf: add multi-frags support to xdp copy helpers
bpf: selftests: update xdp_adjust_tail selftest to include multi-frags

Lorenzo Bianconi (19):
net: skbuff: add size metadata to skb_shared_info for xdp
xdp: introduce flags field in xdp_buff/xdp_frame
net: mvneta: update multi-frags bit before passing the xdp buffer to
eBPF layer
net: mvneta: simplify mvneta_swbm_add_rx_fragment management
net: xdp: add xdp_update_skb_shared_info utility routine
net: marvell: rely on xdp_update_skb_shared_info utility routine
xdp: add multi-frags support to xdp_return_{buff/frame}
net: mvneta: add multi-frags support to XDP_TX
bpf: introduce BPF_F_XDP_HAS_FRAGS flag in prog_flags loading the ebpf
program
net: mvneta: enable jumbo frames if the loaded XDP program support
multi-frags
bpf: introduce bpf_xdp_get_buff_len helper
bpf: move user_size out of bpf_test_init
bpf: introduce multi-frags support to bpf_prog_test_run_xdp()
bpf: test_run: add xdp_shared_info pointer in bpf_test_finish
signature
libbpf: Add SEC name for xdp multi-frags programs
net: xdp: introduce bpf_xdp_pointer utility routine
bpf: selftests: introduce bpf_xdp_{load,store}_bytes selftest
bpf: selftests: add CPUMAP/DEVMAP selftests for xdp multi-frags
xdp: disable XDP_REDIRECT for xdp multi-frags

Toke Hoiland-Jorgensen (1):
bpf: generalise tail call map compatibility check

 drivers/net/ethernet/marvell/mvneta.c         | 206 +++++++++------
 include/linux/bpf.h                           |  31 ++-
 include/linux/skbuff.h                        |   1 +
 include/net/xdp.h                             | 108 +++++++-
 include/uapi/linux/bpf.h                      |  30 +++
 kernel/bpf/arraymap.c                         |   4 +-
 kernel/bpf/core.c                             |  28 +-
 kernel/bpf/cpumap.c                           |   8 +-
 kernel/bpf/devmap.c                           |   3 +-
 kernel/bpf/syscall.c                          |  25 +-
 kernel/trace/bpf_trace.c                      |   3 +
 net/bpf/test_run.c                            | 115 ++++++--
 net/core/filter.c                             | 245 +++++++++++++++++-
 net/core/xdp.c                                |  78 +++++-
 tools/include/uapi/linux/bpf.h                |  30 +++
 tools/lib/bpf/libbpf.c                        |   6 +
 .../bpf/prog_tests/xdp_adjust_frags.c         |  98 +++++++
 .../bpf/prog_tests/xdp_adjust_tail.c          | 131 ++++++++++
 .../selftests/bpf/prog_tests/xdp_bpf2bpf.c    | 151 ++++++++---
 .../bpf/prog_tests/xdp_cpumap_attach.c        |  64 ++++-
 .../bpf/prog_tests/xdp_devmap_attach.c        |  55 ++++
 .../bpf/progs/test_xdp_adjust_tail_grow.c     |  10 +-
 .../bpf/progs/test_xdp_adjust_tail_shrink.c   |  32 ++-
 .../selftests/bpf/progs/test_xdp_bpf2bpf.c    |   2 +-
 .../bpf/progs/test_xdp_update_frags.c         |  42 +++
 .../bpf/progs/test_xdp_with_cpumap_helpers.c  |   6 +
 ...test_xdp_with_cpumap_multi_frags_helpers.c |  27 ++
 .../bpf/progs/test_xdp_with_devmap_helpers.c  |   7 +
 ...test_xdp_with_devmap_multi_frags_helpers.c |  27 ++
 29 files changed, 1361 insertions(+), 212 deletions(-)
 create mode 100644 tools/testing/selftests/bpf/prog_tests/xdp_adjust_frags.c
 create mode 100644 tools/testing/selftests/bpf/progs/test_xdp_update_frags.c
 create mode 100644 tools/testing/selftests/bpf/progs/test_xdp_with_cpumap_multi_frags_helpers.c
 create mode 100644 tools/testing/selftests/bpf/progs/test_xdp_with_devmap_multi_frags_helpers.c
Signature · 1 line
2.34.1
#1 lore raw

PATCH v22 1/23 net: skbuff: add size metadata to skb_shared_info for xdp

Introduce xdp_frags_size field in skb_shared_info data structure to store xdp_buff/xdp_frame frame paged size (xdp_frags_size will be used in xdp multi-frags support). In order to not increase skb_shared_info size we will use a hole due to skb_shared_info alignment.

---
 include/linux/skbuff.h | 1 +
 1 file changed, 1 insertion(+)
include/linux/skbuff.h +1 -0
index bf11e1fbd69b..8131d0de7559 100644
@@ -557,6 +557,7 @@ struct skb_shared_info {
 	 * Warning : all fields before dataref are cleared in __alloc_skb()
 	 */
 	atomic_t	dataref;
+	unsigned int	xdp_frags_size;
 
 	/* Intermediate layers must ensure that destructor_arg
 	 * remains valid until skb destructor */
Signature · 1 line
2.34.1
#2 lore raw

PATCH v22 2/23 xdp: introduce flags field in xdp_buff/xdp_frame

In reply to Lorenzo Bianconi

Introduce flags field in xdp_frame and xdp_buffer data structures to define additional buffer features. At the moment the only supported buffer feature is multi-frags bit (XDP_FLAGS_HAS_FRAGS). Multi-frags bit is used to specify if this is a linear buffer (XDP_FLAGS_HAS_FRAGS not set) or a multi-frags frame (XDP_FLAGS_HAS_FRAGS set). In the latter case the driver is expected to initialize the skb_shared_info structure at the end of the first buffer to link together subsequent buffers belonging to the same frame.

---
 include/net/xdp.h | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)
include/net/xdp.h +29 -0
index 8f0812e4996d..485e9495a690 100644
@@ -66,6 +66,10 @@ struct xdp_txq_info {
 	struct net_device *dev;
 };
 
+enum xdp_buff_flags {
+	XDP_FLAGS_HAS_FRAGS	= BIT(0), /* non-linear xdp buff */
+};
+
 struct xdp_buff {
 	void *data;
 	void *data_end;
@@ -74,13 +78,30 @@ struct xdp_buff {
 	struct xdp_rxq_info *rxq;
 	struct xdp_txq_info *txq;
 	u32 frame_sz; /* frame size to deduce data_hard_end/reserved tailroom*/
+	u32 flags; /* supported values defined in xdp_buff_flags */
 };
 
+static __always_inline bool xdp_buff_has_frags(struct xdp_buff *xdp)
+{
+	return !!(xdp->flags & XDP_FLAGS_HAS_FRAGS);
+}
+
+static __always_inline void xdp_buff_set_frags_flag(struct xdp_buff *xdp)
+{
+	xdp->flags |= XDP_FLAGS_HAS_FRAGS;
+}
+
+static __always_inline void xdp_buff_clear_frags_flag(struct xdp_buff *xdp)
+{
+	xdp->flags &= ~XDP_FLAGS_HAS_FRAGS;
+}
+
 static __always_inline void
 xdp_init_buff(struct xdp_buff *xdp, u32 frame_sz, struct xdp_rxq_info *rxq)
 {
 	xdp->frame_sz = frame_sz;
 	xdp->rxq = rxq;
+	xdp->flags = 0;
 }
 
 static __always_inline void
@@ -122,8 +143,14 @@ struct xdp_frame {
 	 */
 	struct xdp_mem_info mem;
 	struct net_device *dev_rx; /* used by cpumap */
+	u32 flags; /* supported values defined in xdp_buff_flags */
 };
 
+static __always_inline bool xdp_frame_has_frags(struct xdp_frame *frame)
+{
+	return !!(frame->flags & XDP_FLAGS_HAS_FRAGS);
+}
+
 #define XDP_BULK_QUEUE_SIZE	16
 struct xdp_frame_bulk {
 	int count;
@@ -180,6 +207,7 @@ void xdp_convert_frame_to_buff(struct xdp_frame *frame, struct xdp_buff *xdp)
 	xdp->data_end = frame->data + frame->len;
 	xdp->data_meta = frame->data - frame->metasize;
 	xdp->frame_sz = frame->frame_sz;
+	xdp->flags = frame->flags;
 }
 
 static inline
@@ -206,6 +234,7 @@ int xdp_update_frame_from_buff(struct xdp_buff *xdp,
 	xdp_frame->headroom = headroom - sizeof(*xdp_frame);
 	xdp_frame->metasize = metasize;
 	xdp_frame->frame_sz = xdp->frame_sz;
+	xdp_frame->flags = xdp->flags;
 
 	return 0;
 }
Signature · 1 line
2.34.1
#3 lore raw

PATCH v22 3/23 net: mvneta: update multi-frags bit before passing the xdp buffer to eBPF layer

In reply to Lorenzo Bianconi

Update multi-frags bit (XDP_FLAGS_HAS_FRAGS) in xdp_buff to notify XDP/eBPF layer and XDP remote drivers if this is a "non-linear" XDP buffer. Access skb_shared_info only if XDP_FLAGS_HAS_FRAGS flag is set in order to avoid possible cache-misses.

---
 drivers/net/ethernet/marvell/mvneta.c | 23 ++++++++++++++++++-----
 1 file changed, 18 insertions(+), 5 deletions(-)
drivers/net/ethernet/marvell/mvneta.c +18 -5
index 83c8908f0cc7..a3e74a4b19dc 100644
@@ -2065,9 +2065,14 @@ mvneta_xdp_put_buff(struct mvneta_port *pp, struct mvneta_rx_queue *rxq,
 {
 	int i;
 
+	if (likely(!xdp_buff_has_frags(xdp)))
+		goto out;
+
 	for (i = 0; i < sinfo->nr_frags; i++)
 		page_pool_put_full_page(rxq->page_pool,
 					skb_frag_page(&sinfo->frags[i]), true);
+
+out:
 	page_pool_put_page(rxq->page_pool, virt_to_head_page(xdp->data),
 			   sync_len, true);
 }
@@ -2269,7 +2274,6 @@ mvneta_swbm_rx_frame(struct mvneta_port *pp,
 	int data_len = -MVNETA_MH_SIZE, len;
 	struct net_device *dev = pp->dev;
 	enum dma_data_direction dma_dir;
-	struct skb_shared_info *sinfo;
 
 	if (*size > MVNETA_MAX_RX_BUF_SIZE) {
 		len = MVNETA_MAX_RX_BUF_SIZE;
@@ -2289,11 +2293,9 @@ mvneta_swbm_rx_frame(struct mvneta_port *pp,
 
 	/* Prefetch header */
 	prefetch(data);
+	xdp_buff_clear_frags_flag(xdp);
 	xdp_prepare_buff(xdp, data, pp->rx_offset_correction + MVNETA_MH_SIZE,
 			 data_len, false);
-
-	sinfo = xdp_get_shared_info_from_buff(xdp);
-	sinfo->nr_frags = 0;
 }
 
 static void
@@ -2327,6 +2329,9 @@ mvneta_swbm_add_rx_fragment(struct mvneta_port *pp,
 		skb_frag_off_set(frag, pp->rx_offset_correction);
 		skb_frag_size_set(frag, data_len);
 		__skb_frag_set_page(frag, page);
+
+		if (!xdp_buff_has_frags(xdp))
+			xdp_buff_set_frags_flag(xdp);
 	} else {
 		page_pool_put_full_page(rxq->page_pool, page, true);
 	}
@@ -2348,8 +2353,12 @@ mvneta_swbm_build_skb(struct mvneta_port *pp, struct page_pool *pool,
 		      struct xdp_buff *xdp, u32 desc_status)
 {
 	struct skb_shared_info *sinfo = xdp_get_shared_info_from_buff(xdp);
-	int i, num_frags = sinfo->nr_frags;
 	struct sk_buff *skb;
+	u8 num_frags;
+	int i;
+
+	if (unlikely(xdp_buff_has_frags(xdp)))
+		num_frags = sinfo->nr_frags;
 
 	skb = build_skb(xdp->data_hard_start, PAGE_SIZE);
 	if (!skb)
@@ -2361,6 +2370,9 @@ mvneta_swbm_build_skb(struct mvneta_port *pp, struct page_pool *pool,
 	skb_put(skb, xdp->data_end - xdp->data);
 	skb->ip_summed = mvneta_rx_csum(pp, desc_status);
 
+	if (likely(!xdp_buff_has_frags(xdp)))
+		goto out;
+
 	for (i = 0; i < num_frags; i++) {
 		skb_frag_t *frag = &sinfo->frags[i];
 
@@ -2369,6 +2381,7 @@ mvneta_swbm_build_skb(struct mvneta_port *pp, struct page_pool *pool,
 				skb_frag_size(frag), PAGE_SIZE);
 	}
 
+out:
 	return skb;
 }
 
Signature · 1 line
2.34.1
#4 lore raw

PATCH v22 4/23 net: mvneta: simplify mvneta_swbm_add_rx_fragment management

In reply to Lorenzo Bianconi

Relying on xdp multi-frags bit, remove skb_shared_info structure allocated on the stack in mvneta_rx_swbm routine and simplify mvneta_swbm_add_rx_fragment accessing skb_shared_info in the xdp_buff structure directly. There is no performance penalty in this approach since mvneta_swbm_add_rx_fragment is run just for multi-frags use-case.

---
 drivers/net/ethernet/marvell/mvneta.c | 42 ++++++++++-----------------
 1 file changed, 15 insertions(+), 27 deletions(-)
drivers/net/ethernet/marvell/mvneta.c +15 -27
index a3e74a4b19dc..bc70292dda43 100644
@@ -2060,9 +2060,9 @@ int mvneta_rx_refill_queue(struct mvneta_port *pp, struct mvneta_rx_queue *rxq)
 
 static void
 mvneta_xdp_put_buff(struct mvneta_port *pp, struct mvneta_rx_queue *rxq,
-		    struct xdp_buff *xdp, struct skb_shared_info *sinfo,
-		    int sync_len)
+		    struct xdp_buff *xdp, int sync_len)
 {
+	struct skb_shared_info *sinfo = xdp_get_shared_info_from_buff(xdp);
 	int i;
 
 	if (likely(!xdp_buff_has_frags(xdp)))
@@ -2210,7 +2210,6 @@ mvneta_run_xdp(struct mvneta_port *pp, struct mvneta_rx_queue *rxq,
 	       struct bpf_prog *prog, struct xdp_buff *xdp,
 	       u32 frame_sz, struct mvneta_stats *stats)
 {
-	struct skb_shared_info *sinfo = xdp_get_shared_info_from_buff(xdp);
 	unsigned int len, data_len, sync;
 	u32 ret, act;
 
@@ -2231,7 +2230,7 @@ mvneta_run_xdp(struct mvneta_port *pp, struct mvneta_rx_queue *rxq,
 
 		err = xdp_do_redirect(pp->dev, xdp, prog);
 		if (unlikely(err)) {
-			mvneta_xdp_put_buff(pp, rxq, xdp, sinfo, sync);
+			mvneta_xdp_put_buff(pp, rxq, xdp, sync);
 			ret = MVNETA_XDP_DROPPED;
 		} else {
 			ret = MVNETA_XDP_REDIR;
@@ -2242,7 +2241,7 @@ mvneta_run_xdp(struct mvneta_port *pp, struct mvneta_rx_queue *rxq,
 	case XDP_TX:
 		ret = mvneta_xdp_xmit_back(pp, xdp);
 		if (ret != MVNETA_XDP_TX)
-			mvneta_xdp_put_buff(pp, rxq, xdp, sinfo, sync);
+			mvneta_xdp_put_buff(pp, rxq, xdp, sync);
 		break;
 	default:
 		bpf_warn_invalid_xdp_action(pp->dev, prog, act);
@@ -2251,7 +2250,7 @@ mvneta_run_xdp(struct mvneta_port *pp, struct mvneta_rx_queue *rxq,
 		trace_xdp_exception(pp->dev, prog, act);
 		fallthrough;
 	case XDP_DROP:
-		mvneta_xdp_put_buff(pp, rxq, xdp, sinfo, sync);
+		mvneta_xdp_put_buff(pp, rxq, xdp, sync);
 		ret = MVNETA_XDP_DROPPED;
 		stats->xdp_drop++;
 		break;
@@ -2303,9 +2302,9 @@ mvneta_swbm_add_rx_fragment(struct mvneta_port *pp,
 			    struct mvneta_rx_desc *rx_desc,
 			    struct mvneta_rx_queue *rxq,
 			    struct xdp_buff *xdp, int *size,
-			    struct skb_shared_info *xdp_sinfo,
 			    struct page *page)
 {
+	struct skb_shared_info *sinfo = xdp_get_shared_info_from_buff(xdp);
 	struct net_device *dev = pp->dev;
 	enum dma_data_direction dma_dir;
 	int data_len, len;
@@ -2323,8 +2322,11 @@ mvneta_swbm_add_rx_fragment(struct mvneta_port *pp,
 				len, dma_dir);
 	rx_desc->buf_phys_addr = 0;
 
-	if (data_len > 0 && xdp_sinfo->nr_frags < MAX_SKB_FRAGS) {
-		skb_frag_t *frag = &xdp_sinfo->frags[xdp_sinfo->nr_frags++];
+	if (!xdp_buff_has_frags(xdp))
+		sinfo->nr_frags = 0;
+
+	if (data_len > 0 && sinfo->nr_frags < MAX_SKB_FRAGS) {
+		skb_frag_t *frag = &sinfo->frags[sinfo->nr_frags++];
 
 		skb_frag_off_set(frag, pp->rx_offset_correction);
 		skb_frag_size_set(frag, data_len);
@@ -2335,16 +2337,6 @@ mvneta_swbm_add_rx_fragment(struct mvneta_port *pp,
 	} else {
 		page_pool_put_full_page(rxq->page_pool, page, true);
 	}
-
-	/* last fragment */
-	if (len == *size) {
-		struct skb_shared_info *sinfo;
-
-		sinfo = xdp_get_shared_info_from_buff(xdp);
-		sinfo->nr_frags = xdp_sinfo->nr_frags;
-		memcpy(sinfo->frags, xdp_sinfo->frags,
-		       sinfo->nr_frags * sizeof(skb_frag_t));
-	}
 	*size -= len;
 }
 
@@ -2392,7 +2384,6 @@ static int mvneta_rx_swbm(struct napi_struct *napi,
 {
 	int rx_proc = 0, rx_todo, refill, size = 0;
 	struct net_device *dev = pp->dev;
-	struct skb_shared_info sinfo;
 	struct mvneta_stats ps = {};
 	struct bpf_prog *xdp_prog;
 	u32 desc_status, frame_sz;
@@ -2401,8 +2392,6 @@ static int mvneta_rx_swbm(struct napi_struct *napi,
 	xdp_init_buff(&xdp_buf, PAGE_SIZE, &rxq->xdp_rxq);
 	xdp_buf.data_hard_start = NULL;
 
-	sinfo.nr_frags = 0;
-
 	/* Get number of received packets */
 	rx_todo = mvneta_rxq_busy_desc_num_get(pp, rxq);
 
@@ -2444,7 +2433,7 @@ static int mvneta_rx_swbm(struct napi_struct *napi,
 			}
 
 			mvneta_swbm_add_rx_fragment(pp, rx_desc, rxq, &xdp_buf,
-						    &size, &sinfo, page);
+						    &size, page);
 		} /* Middle or Last descriptor */
 
 		if (!(rx_status & MVNETA_RXD_LAST_DESC))
@@ -2452,7 +2441,7 @@ static int mvneta_rx_swbm(struct napi_struct *napi,
 			continue;
 
 		if (size) {
-			mvneta_xdp_put_buff(pp, rxq, &xdp_buf, &sinfo, -1);
+			mvneta_xdp_put_buff(pp, rxq, &xdp_buf, -1);
 			goto next;
 		}
 
@@ -2464,7 +2453,7 @@ static int mvneta_rx_swbm(struct napi_struct *napi,
 		if (IS_ERR(skb)) {
 			struct mvneta_pcpu_stats *stats = this_cpu_ptr(pp->stats);
 
-			mvneta_xdp_put_buff(pp, rxq, &xdp_buf, &sinfo, -1);
+			mvneta_xdp_put_buff(pp, rxq, &xdp_buf, -1);
 
 			u64_stats_update_begin(&stats->syncp);
 			stats->es.skb_alloc_error++;
@@ -2481,11 +2470,10 @@ static int mvneta_rx_swbm(struct napi_struct *napi,
 		napi_gro_receive(napi, skb);
 next:
 		xdp_buf.data_hard_start = NULL;
-		sinfo.nr_frags = 0;
 	}
 
 	if (xdp_buf.data_hard_start)
-		mvneta_xdp_put_buff(pp, rxq, &xdp_buf, &sinfo, -1);
+		mvneta_xdp_put_buff(pp, rxq, &xdp_buf, -1);
 
 	if (ps.xdp_redirect)
 		xdp_do_flush_map();
Signature · 1 line
2.34.1
#5 lore raw

PATCH v22 5/23 net: xdp: add xdp_update_skb_shared_info utility routine

In reply to Lorenzo Bianconi

Introduce xdp_update_skb_shared_info routine to update frags array metadata in skb_shared_info data structure converting to a skb from a xdp_buff or xdp_frame.
According to the current skb_shared_info architecture in xdp_frame/xdp_buff and to the xdp multi-frags support, there is
no need to run skb_add_rx_frag() and reset frags array converting the buffer to a skb since the frag array will be in the same position for xdp_buff/xdp_frame and for the skb, we just need to update memory metadata.
Introduce XDP_FLAGS_PF_MEMALLOC flag in xdp_buff_flags in order to mark the xdp_buff or xdp_frame as under memory-pressure if pages of the frags array are under memory pressure. Doing so we can avoid looping over all fragments in xdp_update_skb_shared_info routine. The driver is expected to set the flag constructing the xdp_buffer using xdp_buff_set_frag_pfmemalloc utility routine.
Rely on xdp_update_skb_shared_info in __xdp_build_skb_from_frame routine converting the multi-frags xdp_frame to a skb after performing a XDP_REDIRECT.

---
 include/net/xdp.h | 33 ++++++++++++++++++++++++++++++++-
 net/core/xdp.c    | 12 ++++++++++++
 2 files changed, 44 insertions(+), 1 deletion(-)
include/net/xdp.h +32 -1
index 485e9495a690..54f18283a7e6 100644
@@ -67,7 +67,10 @@ struct xdp_txq_info {
 };
 
 enum xdp_buff_flags {
-	XDP_FLAGS_HAS_FRAGS	= BIT(0), /* non-linear xdp buff */
+	XDP_FLAGS_HAS_FRAGS		= BIT(0), /* non-linear xdp buff */
+	XDP_FLAGS_FRAGS_PF_MEMALLOC	= BIT(1), /* xdp multi-frags paged memory
+						   * is under pressure
+						   */
 };
 
 struct xdp_buff {
@@ -96,6 +99,16 @@ static __always_inline void xdp_buff_clear_frags_flag(struct xdp_buff *xdp)
 	xdp->flags &= ~XDP_FLAGS_HAS_FRAGS;
 }
 
+static __always_inline bool xdp_buff_is_frag_pfmemalloc(struct xdp_buff *xdp)
+{
+	return !!(xdp->flags & XDP_FLAGS_FRAGS_PF_MEMALLOC);
+}
+
+static __always_inline void xdp_buff_set_frag_pfmemalloc(struct xdp_buff *xdp)
+{
+	xdp->flags |= XDP_FLAGS_FRAGS_PF_MEMALLOC;
+}
+
 static __always_inline void
 xdp_init_buff(struct xdp_buff *xdp, u32 frame_sz, struct xdp_rxq_info *rxq)
 {
@@ -151,6 +164,11 @@ static __always_inline bool xdp_frame_has_frags(struct xdp_frame *frame)
 	return !!(frame->flags & XDP_FLAGS_HAS_FRAGS);
 }
 
+static __always_inline bool xdp_frame_is_frag_pfmemalloc(struct xdp_frame *frame)
+{
+	return !!(frame->flags & XDP_FLAGS_FRAGS_PF_MEMALLOC);
+}
+
 #define XDP_BULK_QUEUE_SIZE	16
 struct xdp_frame_bulk {
 	int count;
@@ -186,6 +204,19 @@ static inline void xdp_scrub_frame(struct xdp_frame *frame)
 	frame->dev_rx = NULL;
 }
 
+static inline void
+xdp_update_skb_shared_info(struct sk_buff *skb, u8 nr_frags,
+			   unsigned int size, unsigned int truesize,
+			   bool pfmemalloc)
+{
+	skb_shinfo(skb)->nr_frags = nr_frags;
+
+	skb->len += size;
+	skb->data_len += size;
+	skb->truesize += truesize;
+	skb->pfmemalloc |= pfmemalloc;
+}
+
 /* Avoids inlining WARN macro in fast-path */
 void xdp_warn(const char *msg, const char *func, const int line);
 #define XDP_WARN(msg) xdp_warn(msg, __func__, __LINE__)
net/core/xdp.c +12 -0
index 7aba35504986..e9a8381704c5 100644
@@ -561,8 +561,14 @@ struct sk_buff *__xdp_build_skb_from_frame(struct xdp_frame *xdpf,
 					   struct sk_buff *skb,
 					   struct net_device *dev)
 {
+	struct skb_shared_info *sinfo = xdp_get_shared_info_from_frame(xdpf);
 	unsigned int headroom, frame_size;
 	void *hard_start;
+	u8 nr_frags;
+
+	/* xdp multi-frags frame */
+	if (unlikely(xdp_frame_has_frags(xdpf)))
+		nr_frags = sinfo->nr_frags;
 
 	/* Part of headroom was reserved to xdpf */
 	headroom = sizeof(*xdpf) + xdpf->headroom;
@@ -582,6 +588,12 @@ struct sk_buff *__xdp_build_skb_from_frame(struct xdp_frame *xdpf,
 	if (xdpf->metasize)
 		skb_metadata_set(skb, xdpf->metasize);
 
+	if (unlikely(xdp_frame_has_frags(xdpf)))
+		xdp_update_skb_shared_info(skb, nr_frags,
+					   sinfo->xdp_frags_size,
+					   nr_frags * xdpf->frame_sz,
+					   xdp_frame_is_frag_pfmemalloc(xdpf));
+
 	/* Essential SKB info: protocol and skb->dev */
 	skb->protocol = eth_type_trans(skb, dev);
 
Signature · 1 line
2.34.1
#6 lore raw

PATCH v22 6/23 net: marvell: rely on xdp_update_skb_shared_info utility routine

In reply to Lorenzo Bianconi

Rely on xdp_update_skb_shared_info routine in order to avoid resetting frags array in skb_shared_info structure building the skb in mvneta_swbm_build_skb(). Frags array is expected to be initialized by the receiving driver building the xdp_buff and here we just need to update memory metadata.

---
 drivers/net/ethernet/marvell/mvneta.c | 23 ++++++++++-------------
 1 file changed, 10 insertions(+), 13 deletions(-)
drivers/net/ethernet/marvell/mvneta.c +10 -13
index bc70292dda43..f1fd93e89c73 100644
@@ -2332,8 +2332,12 @@ mvneta_swbm_add_rx_fragment(struct mvneta_port *pp,
 		skb_frag_size_set(frag, data_len);
 		__skb_frag_set_page(frag, page);
 
-		if (!xdp_buff_has_frags(xdp))
+		if (!xdp_buff_has_frags(xdp)) {
+			sinfo->xdp_frags_size = *size;
 			xdp_buff_set_frags_flag(xdp);
+		}
+		if (page_is_pfmemalloc(page))
+			xdp_buff_set_frag_pfmemalloc(xdp);
 	} else {
 		page_pool_put_full_page(rxq->page_pool, page, true);
 	}
@@ -2347,7 +2351,6 @@ mvneta_swbm_build_skb(struct mvneta_port *pp, struct page_pool *pool,
 	struct skb_shared_info *sinfo = xdp_get_shared_info_from_buff(xdp);
 	struct sk_buff *skb;
 	u8 num_frags;
-	int i;
 
 	if (unlikely(xdp_buff_has_frags(xdp)))
 		num_frags = sinfo->nr_frags;
@@ -2362,18 +2365,12 @@ mvneta_swbm_build_skb(struct mvneta_port *pp, struct page_pool *pool,
 	skb_put(skb, xdp->data_end - xdp->data);
 	skb->ip_summed = mvneta_rx_csum(pp, desc_status);
 
-	if (likely(!xdp_buff_has_frags(xdp)))
-		goto out;
-
-	for (i = 0; i < num_frags; i++) {
-		skb_frag_t *frag = &sinfo->frags[i];
-
-		skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags,
-				skb_frag_page(frag), skb_frag_off(frag),
-				skb_frag_size(frag), PAGE_SIZE);
-	}
+	if (unlikely(xdp_buff_has_frags(xdp)))
+		xdp_update_skb_shared_info(skb, num_frags,
+					   sinfo->xdp_frags_size,
+					   num_frags * xdp->frame_sz,
+					   xdp_buff_is_frag_pfmemalloc(xdp));
 
-out:
 	return skb;
 }
 
Signature · 1 line
2.34.1
#7 lore raw

PATCH v22 7/23 xdp: add multi-frags support to xdp_return_{buff/frame}

In reply to Lorenzo Bianconi

Take into account if the received xdp_buff/xdp_frame is non-linear recycling/returning the frame memory to the allocator or into xdp_frame_bulk.

---
 include/net/xdp.h | 18 ++++++++++++++--
 net/core/xdp.c    | 54 ++++++++++++++++++++++++++++++++++++++++++++++-
 2 files changed, 69 insertions(+), 3 deletions(-)
include/net/xdp.h +16 -2
index 54f18283a7e6..2fc76cd6e09d 100644
@@ -306,10 +306,24 @@ void __xdp_release_frame(void *data, struct xdp_mem_info *mem);
 static inline void xdp_release_frame(struct xdp_frame *xdpf)
 {
 	struct xdp_mem_info *mem = &xdpf->mem;
+	struct skb_shared_info *sinfo;
+	int i;
 
 	/* Curr only page_pool needs this */
-	if (mem->type == MEM_TYPE_PAGE_POOL)
-		__xdp_release_frame(xdpf->data, mem);
+	if (mem->type != MEM_TYPE_PAGE_POOL)
+		return;
+
+	if (likely(!xdp_frame_has_frags(xdpf)))
+		goto out;
+
+	sinfo = xdp_get_shared_info_from_frame(xdpf);
+	for (i = 0; i < sinfo->nr_frags; i++) {
+		struct page *page = skb_frag_page(&sinfo->frags[i]);
+
+		__xdp_release_frame(page_address(page), mem);
+	}
+out:
+	__xdp_release_frame(xdpf->data, mem);
 }
 
 int xdp_rxq_info_reg(struct xdp_rxq_info *xdp_rxq,
net/core/xdp.c +53 -1

84 lines not on this page · raw message

Signature · 1 line
2.34.1
#8 lore raw

PATCH v22 8/23 net: mvneta: add multi-frags support to XDP_TX

In reply to Lorenzo Bianconi

Introduce the capability to map non-linear xdp buffer running mvneta_xdp_submit_frame() for XDP_TX and XDP_REDIRECT

---
 drivers/net/ethernet/marvell/mvneta.c | 112 +++++++++++++++++---------
 1 file changed, 76 insertions(+), 36 deletions(-)
drivers/net/ethernet/marvell/mvneta.c +76 -36
index f1fd93e89c73..c2248e23edcc 100644
@@ -1884,8 +1884,8 @@ static void mvneta_txq_bufs_free(struct mvneta_port *pp,
 			bytes_compl += buf->skb->len;
 			pkts_compl++;
 			dev_kfree_skb_any(buf->skb);
-		} else if (buf->type == MVNETA_TYPE_XDP_TX ||
-			   buf->type == MVNETA_TYPE_XDP_NDO) {
+		} else if ((buf->type == MVNETA_TYPE_XDP_TX ||
+			    buf->type == MVNETA_TYPE_XDP_NDO) && buf->xdpf) {
 			if (napi && buf->type == MVNETA_TYPE_XDP_TX)
 				xdp_return_frame_rx_napi(buf->xdpf);
 			else
@@ -2079,47 +2079,87 @@ mvneta_xdp_put_buff(struct mvneta_port *pp, struct mvneta_rx_queue *rxq,
 
 static int
 mvneta_xdp_submit_frame(struct mvneta_port *pp, struct mvneta_tx_queue *txq,
-			struct xdp_frame *xdpf, bool dma_map)
+			struct xdp_frame *xdpf, int *nxmit_byte, bool dma_map)
 {
-	struct mvneta_tx_desc *tx_desc;
-	struct mvneta_tx_buf *buf;
-	dma_addr_t dma_addr;
+	struct skb_shared_info *sinfo = xdp_get_shared_info_from_frame(xdpf);
+	struct device *dev = pp->dev->dev.parent;
+	struct mvneta_tx_desc *tx_desc = NULL;
+	int i, num_frames = 1;
+	struct page *page;
+
+	if (unlikely(xdp_frame_has_frags(xdpf)))
+		num_frames += sinfo->nr_frags;
 
-	if (txq->count >= txq->tx_stop_threshold)
+	if (txq->count + num_frames >= txq->size)
 		return MVNETA_XDP_DROPPED;
 
-	tx_desc = mvneta_txq_next_desc_get(txq);
+	for (i = 0; i < num_frames; i++) {
+		struct mvneta_tx_buf *buf = &txq->buf[txq->txq_put_index];
+		skb_frag_t *frag = NULL;
+		int len = xdpf->len;
+		dma_addr_t dma_addr;
 
-	buf = &txq->buf[txq->txq_put_index];
-	if (dma_map) {
-		/* ndo_xdp_xmit */
-		dma_addr = dma_map_single(pp->dev->dev.parent, xdpf->data,
-					  xdpf->len, DMA_TO_DEVICE);
-		if (dma_mapping_error(pp->dev->dev.parent, dma_addr)) {
-			mvneta_txq_desc_put(txq);
-			return MVNETA_XDP_DROPPED;
+		if (unlikely(i)) { /* paged area */
+			frag = &sinfo->frags[i - 1];
+			len = skb_frag_size(frag);
 		}
-		buf->type = MVNETA_TYPE_XDP_NDO;
-	} else {
-		struct page *page = virt_to_page(xdpf->data);
 
-		dma_addr = page_pool_get_dma_addr(page) +
-			   sizeof(*xdpf) + xdpf->headroom;
-		dma_sync_single_for_device(pp->dev->dev.parent, dma_addr,
-					   xdpf->len, DMA_BIDIRECTIONAL);
-		buf->type = MVNETA_TYPE_XDP_TX;
+		tx_desc = mvneta_txq_next_desc_get(txq);
+		if (dma_map) {
+			/* ndo_xdp_xmit */
+			void *data;
+
+			data = unlikely(frag) ? skb_frag_address(frag)
+					      : xdpf->data;
+			dma_addr = dma_map_single(dev, data, len,
+						  DMA_TO_DEVICE);
+			if (dma_mapping_error(dev, dma_addr)) {
+				mvneta_txq_desc_put(txq);
+				goto unmap;
+			}
+
+			buf->type = MVNETA_TYPE_XDP_NDO;
+		} else {
+			page = unlikely(frag) ? skb_frag_page(frag)
+					      : virt_to_page(xdpf->data);
+			dma_addr = page_pool_get_dma_addr(page);
+			if (unlikely(frag))
+				dma_addr += skb_frag_off(frag);
+			else
+				dma_addr += sizeof(*xdpf) + xdpf->headroom;
+			dma_sync_single_for_device(dev, dma_addr, len,
+						   DMA_BIDIRECTIONAL);
+			buf->type = MVNETA_TYPE_XDP_TX;
+		}
+		buf->xdpf = unlikely(i) ? NULL : xdpf;
+
+		tx_desc->command = unlikely(i) ? 0 : MVNETA_TXD_F_DESC;
+		tx_desc->buf_phys_addr = dma_addr;
+		tx_desc->data_size = len;
+		*nxmit_byte += len;
+
+		mvneta_txq_inc_put(txq);
 	}
-	buf->xdpf = xdpf;
 
-	tx_desc->command = MVNETA_TXD_FLZ_DESC;
-	tx_desc->buf_phys_addr = dma_addr;
-	tx_desc->data_size = xdpf->len;
+	/*last descriptor */
+	if (likely(tx_desc))
+		tx_desc->command |= MVNETA_TXD_L_DESC | MVNETA_TXD_Z_PAD;
 
-	mvneta_txq_inc_put(txq);
-	txq->pending++;
-	txq->count++;
+	txq->pending += num_frames;
+	txq->count += num_frames;
 
 	return MVNETA_XDP_TX;
+
+unmap:
+	for (i--; i >= 0; i--) {
+		mvneta_txq_desc_put(txq);
+		tx_desc = txq->descs + txq->next_desc_to_proc;
+		dma_unmap_single(dev, tx_desc->buf_phys_addr,
+				 tx_desc->data_size,
+				 DMA_TO_DEVICE);
+	}
+
+	return MVNETA_XDP_DROPPED;
 }
 
 static int
@@ -2128,8 +2168,8 @@ mvneta_xdp_xmit_back(struct mvneta_port *pp, struct xdp_buff *xdp)
 	struct mvneta_pcpu_stats *stats = this_cpu_ptr(pp->stats);
 	struct mvneta_tx_queue *txq;
 	struct netdev_queue *nq;
+	int cpu, nxmit_byte = 0;
 	struct xdp_frame *xdpf;
-	int cpu;
 	u32 ret;
 
 	xdpf = xdp_convert_buff_to_frame(xdp);
@@ -2141,10 +2181,10 @@ mvneta_xdp_xmit_back(struct mvneta_port *pp, struct xdp_buff *xdp)
 	nq = netdev_get_tx_queue(pp->dev, txq->id);
 
 	__netif_tx_lock(nq, cpu);
-	ret = mvneta_xdp_submit_frame(pp, txq, xdpf, false);
+	ret = mvneta_xdp_submit_frame(pp, txq, xdpf, &nxmit_byte, false);
 	if (ret == MVNETA_XDP_TX) {
 		u64_stats_update_begin(&stats->syncp);
-		stats->es.ps.tx_bytes += xdpf->len;
+		stats->es.ps.tx_bytes += nxmit_byte;
 		stats->es.ps.tx_packets++;
 		stats->es.ps.xdp_tx++;
 		u64_stats_update_end(&stats->syncp);
@@ -2183,11 +2223,11 @@ mvneta_xdp_xmit(struct net_device *dev, int num_frame,
 
 	__netif_tx_lock(nq, cpu);
 	for (i = 0; i < num_frame; i++) {
-		ret = mvneta_xdp_submit_frame(pp, txq, frames[i], true);
+		ret = mvneta_xdp_submit_frame(pp, txq, frames[i], &nxmit_byte,
+					      true);
 		if (ret != MVNETA_XDP_TX)
 			break;
 
-		nxmit_byte += frames[i]->len;
 		nxmit++;
 	}
 
Signature · 1 line
2.34.1
#9 lore raw

PATCH v22 9/23 bpf: introduce BPF_F_XDP_HAS_FRAGS flag in prog_flags loading the ebpf program

In reply to Lorenzo Bianconi

Introduce BPF_F_XDP_HAS_FRAGS and the related field in bpf_prog_aux in order to notify the driver the loaded program support xdp multi-frags.

---
 include/linux/bpf.h            | 1 +
 include/uapi/linux/bpf.h       | 5 +++++
 kernel/bpf/syscall.c           | 4 +++-
 tools/include/uapi/linux/bpf.h | 5 +++++
 4 files changed, 14 insertions(+), 1 deletion(-)
include/linux/bpf.h +1 -0
index 6e947cd91152..909fa29981fd 100644
@@ -934,6 +934,7 @@ struct bpf_prog_aux {
 	bool func_proto_unreliable;
 	bool sleepable;
 	bool tail_call_reachable;
+	bool xdp_has_frags;
 	struct hlist_node tramp_hlist;
 	/* BTF_KIND_FUNC_PROTO for valid attach_btf_id */
 	const struct btf_type *attach_func_proto;
include/uapi/linux/bpf.h +5 -0
index b0383d371b9a..35e95d56f858 100644
@@ -1111,6 +1111,11 @@ enum bpf_link_type {
  */
 #define BPF_F_SLEEPABLE		(1U << 4)
 
+/* If BPF_F_XDP_HAS_FRAGS is used in BPF_PROG_LOAD command, the loaded program
+ * fully support xdp multi-frags.
+ */
+#define BPF_F_XDP_HAS_FRAGS	(1U << 5)
+
 /* When BPF ldimm64's insn[0].src_reg != 0 then this can have
  * the following extensions:
  *
kernel/bpf/syscall.c +3 -1
index fa4505f9b611..e3c9deb7e25f 100644
@@ -2217,7 +2217,8 @@ static int bpf_prog_load(union bpf_attr *attr, bpfptr_t uattr)
 				 BPF_F_ANY_ALIGNMENT |
 				 BPF_F_TEST_STATE_FREQ |
 				 BPF_F_SLEEPABLE |
-				 BPF_F_TEST_RND_HI32))
+				 BPF_F_TEST_RND_HI32 |
+				 BPF_F_XDP_HAS_FRAGS))
 		return -EINVAL;
 
 	if (!IS_ENABLED(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS) &&
@@ -2303,6 +2304,7 @@ static int bpf_prog_load(union bpf_attr *attr, bpfptr_t uattr)
 	prog->aux->dst_prog = dst_prog;
 	prog->aux->offload_requested = !!attr->prog_ifindex;
 	prog->aux->sleepable = attr->prog_flags & BPF_F_SLEEPABLE;
+	prog->aux->xdp_has_frags = attr->prog_flags & BPF_F_XDP_HAS_FRAGS;
 
 	err = security_bpf_prog_alloc(prog->aux);
 	if (err)
tools/include/uapi/linux/bpf.h +5 -0
index b0383d371b9a..35e95d56f858 100644
@@ -1111,6 +1111,11 @@ enum bpf_link_type {
  */
 #define BPF_F_SLEEPABLE		(1U << 4)
 
+/* If BPF_F_XDP_HAS_FRAGS is used in BPF_PROG_LOAD command, the loaded program
+ * fully support xdp multi-frags.
+ */
+#define BPF_F_XDP_HAS_FRAGS	(1U << 5)
+
 /* When BPF ldimm64's insn[0].src_reg != 0 then this can have
  * the following extensions:
  *
Signature · 1 line
2.34.1
#10 lore raw

PATCH v22 10/23 net: mvneta: enable jumbo frames if the loaded XDP program support multi-frags

In reply to Lorenzo Bianconi

Enable the capability to receive jumbo frames even if the interface is running in XDP mode if the loaded program declare to properly support xdp multi-frags. At same time reject a xdp program not supporting xdp multi-frags if the driver is running in xdp multi-frags mode.

---
 drivers/net/ethernet/marvell/mvneta.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)
drivers/net/ethernet/marvell/mvneta.c +11 -4
index c2248e23edcc..fc3d19467de7 100644
@@ -3778,6 +3778,7 @@ static void mvneta_percpu_disable(void *arg)
 static int mvneta_change_mtu(struct net_device *dev, int mtu)
 {
 	struct mvneta_port *pp = netdev_priv(dev);
+	struct bpf_prog *prog = pp->xdp_prog;
 	int ret;
 
 	if (!IS_ALIGNED(MVNETA_RX_PKT_SIZE(mtu), 8)) {
@@ -3786,8 +3787,12 @@ static int mvneta_change_mtu(struct net_device *dev, int mtu)
 		mtu = ALIGN(MVNETA_RX_PKT_SIZE(mtu), 8);
 	}
 
-	if (pp->xdp_prog && mtu > MVNETA_MAX_RX_BUF_SIZE) {
-		netdev_info(dev, "Illegal MTU value %d for XDP mode\n", mtu);
+	if (prog && !prog->aux->xdp_has_frags &&
+	    mtu > MVNETA_MAX_RX_BUF_SIZE) {
+		netdev_info(dev,
+			    "Illegal MTU %d for XDP prog without multi-frags\n",
+			    mtu);
+
 		return -EINVAL;
 	}
 
@@ -4528,8 +4533,10 @@ static int mvneta_xdp_setup(struct net_device *dev, struct bpf_prog *prog,
 	struct mvneta_port *pp = netdev_priv(dev);
 	struct bpf_prog *old_prog;
 
-	if (prog && dev->mtu > MVNETA_MAX_RX_BUF_SIZE) {
-		NL_SET_ERR_MSG_MOD(extack, "MTU too large for XDP");
+	if (prog && !prog->aux->xdp_has_frags &&
+	    dev->mtu > MVNETA_MAX_RX_BUF_SIZE) {
+		NL_SET_ERR_MSG_MOD(extack,
+				   "prog does not support XDP multi-frags");
 		return -EOPNOTSUPP;
 	}
 
Signature · 1 line
2.34.1
#11 lore raw

PATCH v22 11/23 bpf: introduce bpf_xdp_get_buff_len helper

In reply to Lorenzo Bianconi

Introduce bpf_xdp_get_buff_len helper in order to return the xdp buffer total size (linear and paged area)

---
 include/net/xdp.h              | 14 ++++++++++++++
 include/uapi/linux/bpf.h       |  7 +++++++
 net/core/filter.c              | 15 +++++++++++++++
 tools/include/uapi/linux/bpf.h |  7 +++++++
 4 files changed, 43 insertions(+)
include/net/xdp.h +14 -0
index 2fc76cd6e09d..6caea9b633e4 100644
@@ -145,6 +145,20 @@ xdp_get_shared_info_from_buff(struct xdp_buff *xdp)
 	return (struct skb_shared_info *)xdp_data_hard_end(xdp);
 }
 
+static __always_inline unsigned int xdp_get_buff_len(struct xdp_buff *xdp)
+{
+	unsigned int len = xdp->data_end - xdp->data;
+	struct skb_shared_info *sinfo;
+
+	if (likely(!xdp_buff_has_frags(xdp)))
+		goto out;
+
+	sinfo = xdp_get_shared_info_from_buff(xdp);
+	len += sinfo->xdp_frags_size;
+out:
+	return len;
+}
+
 struct xdp_frame {
 	void *data;
 	u16 len;
include/uapi/linux/bpf.h +7 -0
index 35e95d56f858..26c6c2bc6b43 100644
@@ -5023,6 +5023,12 @@ union bpf_attr {
  *
  *	Return
  *		The number of arguments of the traced function.
+ *
+ * u64 bpf_xdp_get_buff_len(struct xdp_buff *xdp_md)
+ *	Description
+ *		Get the total size of a given xdp buff (linear and paged area)
+ *	Return
+ *		The total size of a given xdp buffer.
  */
 #define __BPF_FUNC_MAPPER(FN)		\
 	FN(unspec),			\
@@ -5211,6 +5217,7 @@ union bpf_attr {
 	FN(get_func_arg),		\
 	FN(get_func_ret),		\
 	FN(get_func_arg_cnt),		\
+	FN(xdp_get_buff_len),		\
 	/* */
 
 /* integer value in 'imm' field of BPF_CALL instruction selects which helper
net/core/filter.c +15 -0
index 4603b7cd3cd1..332f8e7802bc 100644
@@ -3783,6 +3783,19 @@ static const struct bpf_func_proto sk_skb_change_head_proto = {
 	.arg2_type	= ARG_ANYTHING,
 	.arg3_type	= ARG_ANYTHING,
 };
+
+BPF_CALL_1(bpf_xdp_get_buff_len, struct  xdp_buff*, xdp)
+{
+	return xdp_get_buff_len(xdp);
+}
+
+static const struct bpf_func_proto bpf_xdp_get_buff_len_proto = {
+	.func		= bpf_xdp_get_buff_len,
+	.gpl_only	= false,
+	.ret_type	= RET_INTEGER,
+	.arg1_type	= ARG_PTR_TO_CTX,
+};
+
 static unsigned long xdp_get_metalen(const struct xdp_buff *xdp)
 {
 	return xdp_data_meta_unsupported(xdp) ? 0 :
@@ -7533,6 +7546,8 @@ xdp_func_proto(enum bpf_func_id func_id, const struct bpf_prog *prog)
 		return &bpf_xdp_redirect_map_proto;
 	case BPF_FUNC_xdp_adjust_tail:
 		return &bpf_xdp_adjust_tail_proto;
+	case BPF_FUNC_xdp_get_buff_len:
+		return &bpf_xdp_get_buff_len_proto;
 	case BPF_FUNC_fib_lookup:
 		return &bpf_xdp_fib_lookup_proto;
 	case BPF_FUNC_check_mtu:
tools/include/uapi/linux/bpf.h +7 -0
index 35e95d56f858..26c6c2bc6b43 100644
@@ -5023,6 +5023,12 @@ union bpf_attr {
  *
  *	Return
  *		The number of arguments of the traced function.
+ *
+ * u64 bpf_xdp_get_buff_len(struct xdp_buff *xdp_md)
+ *	Description
+ *		Get the total size of a given xdp buff (linear and paged area)
+ *	Return
+ *		The total size of a given xdp buffer.
  */
 #define __BPF_FUNC_MAPPER(FN)		\
 	FN(unspec),			\
@@ -5211,6 +5217,7 @@ union bpf_attr {
 	FN(get_func_arg),		\
 	FN(get_func_ret),		\
 	FN(get_func_arg_cnt),		\
+	FN(xdp_get_buff_len),		\
 	/* */
 
 /* integer value in 'imm' field of BPF_CALL instruction selects which helper
Signature · 1 line
2.34.1
#12 lore raw

PATCH v22 12/23 bpf: add multi-frags support to the bpf_xdp_adjust_tail() API

In reply to Lorenzo Bianconi

From: Eelco Chaudron <[email protected]>

This change adds support for tail growing and shrinking for XDP multi-frags.

When called on a multi-frags packet with a grow request, it will work on the last fragment of the packet. So the maximum grow size is the last fragments tailroom, i.e. no new buffer will be allocated. A XDP multi-frags capable driver is expected to set frag_size in xdp_rxq_info data structure to notify the XDP core the fragment size. frag_size set to 0 is interpreted by the XDP core as tail growing is not allowed.
Introduce __xdp_rxq_info_reg utility routine to initialize frag_size field.

When shrinking, it will work from the last fragment, all the way down to the base buffer depending on the shrinking size. It's important to mention that once you shrink down the fragment(s) are freed, so you can not grow again to the original size.

---
 drivers/net/ethernet/marvell/mvneta.c |  3 +-
 include/net/xdp.h                     | 16 ++++++-
 net/core/filter.c                     | 65 +++++++++++++++++++++++++++
 net/core/xdp.c                        | 12 ++---
 4 files changed, 88 insertions(+), 8 deletions(-)
drivers/net/ethernet/marvell/mvneta.c +2 -1
index fc3d19467de7..9a3ec41d5f12 100644
@@ -3298,7 +3298,8 @@ static int mvneta_create_page_pool(struct mvneta_port *pp,
 		return err;
 	}
 
-	err = xdp_rxq_info_reg(&rxq->xdp_rxq, pp->dev, rxq->id, 0);
+	err = __xdp_rxq_info_reg(&rxq->xdp_rxq, pp->dev, rxq->id, 0,
+				 PAGE_SIZE);
 	if (err < 0)
 		goto err_free_pp;
 
include/net/xdp.h +14 -2
index 6caea9b633e4..9bb9a2b81ef2 100644
@@ -60,6 +60,7 @@ struct xdp_rxq_info {
 	u32 reg_state;
 	struct xdp_mem_info mem;
 	unsigned int napi_id;
+	u32 frag_size;
 } ____cacheline_aligned; /* perf critical, avoid false-sharing */
 
 struct xdp_txq_info {
@@ -304,6 +305,8 @@ struct xdp_frame *xdp_convert_buff_to_frame(struct xdp_buff *xdp)
 	return xdp_frame;
 }
 
+void __xdp_return(void *data, struct xdp_mem_info *mem, bool napi_direct,
+		  struct xdp_buff *xdp);
 void xdp_return_frame(struct xdp_frame *xdpf);
 void xdp_return_frame_rx_napi(struct xdp_frame *xdpf);
 void xdp_return_buff(struct xdp_buff *xdp);
@@ -340,8 +343,17 @@ static inline void xdp_release_frame(struct xdp_frame *xdpf)
 	__xdp_release_frame(xdpf->data, mem);
 }
 
-int xdp_rxq_info_reg(struct xdp_rxq_info *xdp_rxq,
-		     struct net_device *dev, u32 queue_index, unsigned int napi_id);
+int __xdp_rxq_info_reg(struct xdp_rxq_info *xdp_rxq,
+		       struct net_device *dev, u32 queue_index,
+		       unsigned int napi_id, u32 frag_size);
+static inline int
+xdp_rxq_info_reg(struct xdp_rxq_info *xdp_rxq,
+		 struct net_device *dev, u32 queue_index,
+		 unsigned int napi_id)
+{
+	return __xdp_rxq_info_reg(xdp_rxq, dev, queue_index, napi_id, 0);
+}
+
 void xdp_rxq_info_unreg(struct xdp_rxq_info *xdp_rxq);
 void xdp_rxq_info_unused(struct xdp_rxq_info *xdp_rxq);
 bool xdp_rxq_info_is_reg(struct xdp_rxq_info *xdp_rxq);
net/core/filter.c +65 -0

76 lines not on this page · raw message

net/core/xdp.c +7 -5
index 3be94198d104..f989ac34dc39 100644
@@ -162,8 +162,9 @@ static void xdp_rxq_info_init(struct xdp_rxq_info *xdp_rxq)
 }
 
 /* Returns 0 on success, negative on failure */
-int xdp_rxq_info_reg(struct xdp_rxq_info *xdp_rxq,
-		     struct net_device *dev, u32 queue_index, unsigned int napi_id)
+int __xdp_rxq_info_reg(struct xdp_rxq_info *xdp_rxq,
+		       struct net_device *dev, u32 queue_index,
+		       unsigned int napi_id, u32 frag_size)
 {
 	if (!dev) {
 		WARN(1, "Missing net_device from driver");
@@ -185,11 +186,12 @@ int xdp_rxq_info_reg(struct xdp_rxq_info *xdp_rxq,
 	xdp_rxq->dev = dev;
 	xdp_rxq->queue_index = queue_index;
 	xdp_rxq->napi_id = napi_id;
+	xdp_rxq->frag_size = frag_size;
 
 	xdp_rxq->reg_state = REG_STATE_REGISTERED;
 	return 0;
 }
-EXPORT_SYMBOL_GPL(xdp_rxq_info_reg);
+EXPORT_SYMBOL_GPL(__xdp_rxq_info_reg);
 
 void xdp_rxq_info_unused(struct xdp_rxq_info *xdp_rxq)
 {
@@ -369,8 +371,8 @@ EXPORT_SYMBOL_GPL(xdp_rxq_info_reg_mem_model);
  * is used for those calls sites.  Thus, allowing for faster recycling
  * of xdp_frames/pages in those cases.
  */
-static void __xdp_return(void *data, struct xdp_mem_info *mem, bool napi_direct,
-			 struct xdp_buff *xdp)
+void __xdp_return(void *data, struct xdp_mem_info *mem, bool napi_direct,
+		  struct xdp_buff *xdp)
 {
 	struct xdp_mem_allocator *xa;
 	struct page *page;
Signature · 1 line
2.34.1
#13 lore raw

Re: [PATCH v22 bpf-next 12/23] bpf: add multi-frags support to the bpf_xdp_adjust_tail() API

net/core/filter.c static const struct bpf_func_proto bpf_xdp_adjust_head_proto = { · line 3901

Quoted 11 lines · Lorenzo Bianconi

BPF_CALL_2(bpf_xdp_adjust_tail, struct xdp_buff *, xdp, int, offset) {

net/core/filter.c +6 -0
 	void *data_hard_end = xdp_data_hard_end(xdp); /* use xdp->frame_sz */
 	void *data_end = xdp->data_end + offset;
 
+	if (unlikely(xdp_buff_has_frags(xdp))) { /* xdp multi-frags */
+		if (offset < 0)
+			return bpf_xdp_multi_frags_shrink_tail(xdp, -offset);
+
+		return bpf_xdp_multi_frags_increase_tail(xdp, offset);
+	}

"multi frags" isn't quite correct here and in other places. It sounds like watery water.
Saying "xdp frags" is enough to explain that xdp has fragments. Either multiple fragments or just one fragment doesn't matter. I think it would be cleaner to drop "multi".

#14 lore raw

Re: [PATCH v22 bpf-next 12/23] bpf: add multi-frags support to the bpf_xdp_adjust_tail() API

Quoted 6 lines · Lorenzo Bianconi
Quoted 5 lines

BPF_CALL_2(bpf_xdp_adjust_tail, struct xdp_buff *, xdp, int, offset) {

net/core/filter.c +0 -0
 	void *data_hard_end = xdp_data_hard_end(xdp); /* use xdp->frame_sz */
 	void *data_end = xdp->data_end + offset;
Quoted 12 lines

net/core/filter.c static const struct bpf_func_proto bpf_xdp_adjust_head_proto = { · line 3901

Quoted 6 lines
net/core/filter.c +6 -0
+	if (unlikely(xdp_buff_has_frags(xdp))) { /* xdp multi-frags */
+		if (offset < 0)
+			return bpf_xdp_multi_frags_shrink_tail(xdp, -offset);
+
+		return bpf_xdp_multi_frags_increase_tail(xdp, offset);
+	}

"multi frags" isn't quite correct here and in other places. It sounds like watery water.
Saying "xdp frags" is enough to explain that xdp has fragments. Either multiple fragments or just one fragment doesn't matter. I think it would be cleaner to drop "multi".

ack, I will fix it.

Regards,
Lorenzo

#15 lore raw

PATCH v22 13/23 bpf: add multi-frags support to xdp copy helpers

In reply to Lorenzo Bianconi

From: Eelco Chaudron <[email protected]>

This patch adds support for multi-frags for the following helpers:
- bpf_xdp_output()
- bpf_perf_event_output()

---
 kernel/trace/bpf_trace.c                      |   3 +
 net/core/filter.c                             |  57 ++++++-
 .../selftests/bpf/prog_tests/xdp_bpf2bpf.c    | 151 +++++++++++++-----
 .../selftests/bpf/progs/test_xdp_bpf2bpf.c    |   2 +-
 4 files changed, 168 insertions(+), 45 deletions(-)
kernel/trace/bpf_trace.c +3 -0
index 21aa30644219..06a9e220069e 100644
@@ -1562,6 +1562,7 @@ static const struct bpf_func_proto bpf_perf_event_output_proto_raw_tp = {
 
 extern const struct bpf_func_proto bpf_skb_output_proto;
 extern const struct bpf_func_proto bpf_xdp_output_proto;
+extern const struct bpf_func_proto bpf_xdp_get_buff_len_trace_proto;
 
 BPF_CALL_3(bpf_get_stackid_raw_tp, struct bpf_raw_tracepoint_args *, args,
 	   struct bpf_map *, map, u64, flags)
@@ -1661,6 +1662,8 @@ tracing_prog_func_proto(enum bpf_func_id func_id, const struct bpf_prog *prog)
 		return &bpf_sock_from_file_proto;
 	case BPF_FUNC_get_socket_cookie:
 		return &bpf_get_socket_ptr_cookie_proto;
+	case BPF_FUNC_xdp_get_buff_len:
+		return &bpf_xdp_get_buff_len_trace_proto;
 #endif
 	case BPF_FUNC_seq_printf:
 		return prog->expected_attach_type == BPF_TRACE_ITER ?
net/core/filter.c +52 -5

79 lines not on this page · raw message

tools/testing/selftests/bpf/prog_tests/xdp_bpf2bpf.c +112 -39

187 lines not on this page · raw message

tools/testing/selftests/bpf/progs/test_xdp_bpf2bpf.c +1 -1
index 58cf4345f5cc..3379d303f41a 100644
@@ -49,7 +49,7 @@ int BPF_PROG(trace_on_entry, struct xdp_buff *xdp)
 	void *data = (void *)(long)xdp->data;
 
 	meta.ifindex = xdp->rxq->dev->ifindex;
-	meta.pkt_len = data_end - data;
+	meta.pkt_len = bpf_xdp_get_buff_len((struct xdp_md *)xdp);
 	bpf_xdp_output(xdp, &perf_buf_map,
 		       ((__u64) meta.pkt_len << 32) |
 		       BPF_F_CURRENT_CPU,
Signature · 1 line
2.34.1
#16 lore raw

PATCH v22 14/23 bpf: move user_size out of bpf_test_init

In reply to Lorenzo Bianconi

Rely on data_size_in in bpf_test_init routine signature. This is a preliminary patch to introduce xdp multi-frags selftest

---
 net/bpf/test_run.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)
net/bpf/test_run.c +7 -6
index 46dd95755967..dbf1227f437c 100644
@@ -249,11 +249,10 @@ bool bpf_prog_test_check_kfunc_call(u32 kfunc_id, struct module *owner)
 	return bpf_check_mod_kfunc_call(&prog_test_kfunc_list, kfunc_id, owner);
 }
 
-static void *bpf_test_init(const union bpf_attr *kattr, u32 size,
-			   u32 headroom, u32 tailroom)
+static void *bpf_test_init(const union bpf_attr *kattr, u32 user_size,
+			   u32 size, u32 headroom, u32 tailroom)
 {
 	void __user *data_in = u64_to_user_ptr(kattr->test.data_in);
-	u32 user_size = kattr->test.data_size_in;
 	void *data;
 
 	if (size < ETH_HLEN || size > PAGE_SIZE - headroom - tailroom)
@@ -581,7 +580,8 @@ int bpf_prog_test_run_skb(struct bpf_prog *prog, const union bpf_attr *kattr,
 	if (kattr->test.flags || kattr->test.cpu)
 		return -EINVAL;
 
-	data = bpf_test_init(kattr, size, NET_SKB_PAD + NET_IP_ALIGN,
+	data = bpf_test_init(kattr, kattr->test.data_size_in,
+			     size, NET_SKB_PAD + NET_IP_ALIGN,
 			     SKB_DATA_ALIGN(sizeof(struct skb_shared_info)));
 	if (IS_ERR(data))
 		return PTR_ERR(data);
@@ -790,7 +790,8 @@ int bpf_prog_test_run_xdp(struct bpf_prog *prog, const union bpf_attr *kattr,
 	/* XDP have extra tailroom as (most) drivers use full page */
 	max_data_sz = 4096 - headroom - tailroom;
 
-	data = bpf_test_init(kattr, max_data_sz, headroom, tailroom);
+	data = bpf_test_init(kattr, kattr->test.data_size_in,
+			     max_data_sz, headroom, tailroom);
 	if (IS_ERR(data)) {
 		ret = PTR_ERR(data);
 		goto free_ctx;
@@ -876,7 +877,7 @@ int bpf_prog_test_run_flow_dissector(struct bpf_prog *prog,
 	if (size < ETH_HLEN)
 		return -EINVAL;
 
-	data = bpf_test_init(kattr, size, 0, 0);
+	data = bpf_test_init(kattr, kattr->test.data_size_in, size, 0, 0);
 	if (IS_ERR(data))
 		return PTR_ERR(data);
 
Signature · 1 line
2.34.1
#17 lore raw

PATCH v22 15/23 bpf: introduce multi-frags support to bpf_prog_test_run_xdp()

In reply to Lorenzo Bianconi

Introduce the capability to allocate a xdp multi-frags in bpf_prog_test_run_xdp routine. This is a preliminary patch to introduce the selftests for new xdp multi-frags ebpf helpers

---
 net/bpf/test_run.c | 58 +++++++++++++++++++++++++++++++++++-----------
 1 file changed, 45 insertions(+), 13 deletions(-)
net/bpf/test_run.c +45 -13
index dbf1227f437c..f42179300562 100644
@@ -758,16 +758,16 @@ int bpf_prog_test_run_xdp(struct bpf_prog *prog, const union bpf_attr *kattr,
 			  union bpf_attr __user *uattr)
 {
 	u32 tailroom = SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
-	u32 headroom = XDP_PACKET_HEADROOM;
 	u32 size = kattr->test.data_size_in;
+	u32 headroom = XDP_PACKET_HEADROOM;
+	u32 retval, duration, max_data_sz;
 	u32 repeat = kattr->test.repeat;
 	struct netdev_rx_queue *rxqueue;
+	struct skb_shared_info *sinfo;
 	struct xdp_buff xdp = {};
-	u32 retval, duration;
+	int i, ret = -EINVAL;
 	struct xdp_md *ctx;
-	u32 max_data_sz;
 	void *data;
-	int ret = -EINVAL;
 
 	if (prog->expected_attach_type == BPF_XDP_DEVMAP ||
 	    prog->expected_attach_type == BPF_XDP_CPUMAP)
@@ -787,27 +787,60 @@ int bpf_prog_test_run_xdp(struct bpf_prog *prog, const union bpf_attr *kattr,
 		headroom -= ctx->data;
 	}
 
-	/* XDP have extra tailroom as (most) drivers use full page */
 	max_data_sz = 4096 - headroom - tailroom;
+	size = min_t(u32, size, max_data_sz);
 
-	data = bpf_test_init(kattr, kattr->test.data_size_in,
-			     max_data_sz, headroom, tailroom);
+	data = bpf_test_init(kattr, size, max_data_sz, headroom, tailroom);
 	if (IS_ERR(data)) {
 		ret = PTR_ERR(data);
 		goto free_ctx;
 	}
 
 	rxqueue = __netif_get_rx_queue(current->nsproxy->net_ns->loopback_dev, 0);
-	xdp_init_buff(&xdp, headroom + max_data_sz + tailroom,
-		      &rxqueue->xdp_rxq);
+	rxqueue->xdp_rxq.frag_size = headroom + max_data_sz + tailroom;
+	xdp_init_buff(&xdp, rxqueue->xdp_rxq.frag_size, &rxqueue->xdp_rxq);
 	xdp_prepare_buff(&xdp, data, headroom, size, true);
+	sinfo = xdp_get_shared_info_from_buff(&xdp);
 
 	ret = xdp_convert_md_to_buff(ctx, &xdp);
 	if (ret)
 		goto free_data;
 
+	if (unlikely(kattr->test.data_size_in > size)) {
+		void __user *data_in = u64_to_user_ptr(kattr->test.data_in);
+
+		while (size < kattr->test.data_size_in) {
+			struct page *page;
+			skb_frag_t *frag;
+			int data_len;
+
+			page = alloc_page(GFP_KERNEL);
+			if (!page) {
+				ret = -ENOMEM;
+				goto out;
+			}
+
+			frag = &sinfo->frags[sinfo->nr_frags++];
+			__skb_frag_set_page(frag, page);
+
+			data_len = min_t(int, kattr->test.data_size_in - size,
+					 PAGE_SIZE);
+			skb_frag_size_set(frag, data_len);
+
+			if (copy_from_user(page_address(page), data_in + size,
+					   data_len)) {
+				ret = -EFAULT;
+				goto out;
+			}
+			sinfo->xdp_frags_size += data_len;
+			size += data_len;
+		}
+		xdp_buff_set_frags_flag(&xdp);
+	}
+
 	if (repeat > 1)
 		bpf_prog_change_xdp(NULL, prog);
+
 	ret = bpf_test_run(prog, &xdp, repeat, &retval, &duration, true);
 	/* We convert the xdp_buff back to an xdp_md before checking the return
 	 * code so the reference count of any held netdevice will be decremented
@@ -817,10 +850,7 @@ int bpf_prog_test_run_xdp(struct bpf_prog *prog, const union bpf_attr *kattr,
 	if (ret)
 		goto out;
 
-	if (xdp.data_meta != data + headroom ||
-	    xdp.data_end != xdp.data_meta + size)
-		size = xdp.data_end - xdp.data_meta;
-
+	size = xdp.data_end - xdp.data_meta + sinfo->xdp_frags_size;
 	ret = bpf_test_finish(kattr, uattr, xdp.data_meta, size, retval,
 			      duration);
 	if (!ret)
@@ -831,6 +861,8 @@ int bpf_prog_test_run_xdp(struct bpf_prog *prog, const union bpf_attr *kattr,
 	if (repeat > 1)
 		bpf_prog_change_xdp(prog, NULL);
 free_data:
+	for (i = 0; i < sinfo->nr_frags; i++)
+		__free_page(skb_frag_page(&sinfo->frags[i]));
 	kfree(data);
 free_ctx:
 	kfree(ctx);
Signature · 1 line
2.34.1
#18 lore raw

PATCH v22 16/23 bpf: test_run: add xdp_shared_info pointer in bpf_test_finish signature

In reply to Lorenzo Bianconi

introduce xdp_shared_info pointer in bpf_test_finish signature in order to copy back paged data from a xdp multi-frags frame to userspace buffer

---
 net/bpf/test_run.c | 48 +++++++++++++++++++++++++++++++++++++---------
 1 file changed, 39 insertions(+), 9 deletions(-)
net/bpf/test_run.c +39 -9
index f42179300562..bb67c5345642 100644
@@ -130,7 +130,8 @@ static int bpf_test_run(struct bpf_prog *prog, void *ctx, u32 repeat,
 
 static int bpf_test_finish(const union bpf_attr *kattr,
 			   union bpf_attr __user *uattr, const void *data,
-			   u32 size, u32 retval, u32 duration)
+			   struct skb_shared_info *sinfo, u32 size,
+			   u32 retval, u32 duration)
 {
 	void __user *data_out = u64_to_user_ptr(kattr->test.data_out);
 	int err = -EFAULT;
@@ -145,8 +146,36 @@ static int bpf_test_finish(const union bpf_attr *kattr,
 		err = -ENOSPC;
 	}
 
-	if (data_out && copy_to_user(data_out, data, copy_size))
-		goto out;
+	if (data_out) {
+		int len = sinfo ? copy_size - sinfo->xdp_frags_size : copy_size;
+
+		if (copy_to_user(data_out, data, len))
+			goto out;
+
+		if (sinfo) {
+			int i, offset = len, data_len;
+
+			for (i = 0; i < sinfo->nr_frags; i++) {
+				skb_frag_t *frag = &sinfo->frags[i];
+
+				if (offset >= copy_size) {
+					err = -ENOSPC;
+					break;
+				}
+
+				data_len = min_t(int, copy_size - offset,
+						 skb_frag_size(frag));
+
+				if (copy_to_user(data_out + offset,
+						 skb_frag_address(frag),
+						 data_len))
+					goto out;
+
+				offset += data_len;
+			}
+		}
+	}
+
 	if (copy_to_user(&uattr->test.data_size_out, &size, sizeof(size)))
 		goto out;
 	if (copy_to_user(&uattr->test.retval, &retval, sizeof(retval)))
@@ -683,7 +712,8 @@ int bpf_prog_test_run_skb(struct bpf_prog *prog, const union bpf_attr *kattr,
 	/* bpf program can never convert linear skb to non-linear */
 	if (WARN_ON_ONCE(skb_is_nonlinear(skb)))
 		size = skb_headlen(skb);
-	ret = bpf_test_finish(kattr, uattr, skb->data, size, retval, duration);
+	ret = bpf_test_finish(kattr, uattr, skb->data, NULL, size, retval,
+			      duration);
 	if (!ret)
 		ret = bpf_ctx_finish(kattr, uattr, ctx,
 				     sizeof(struct __sk_buff));
@@ -851,8 +881,8 @@ int bpf_prog_test_run_xdp(struct bpf_prog *prog, const union bpf_attr *kattr,
 		goto out;
 
 	size = xdp.data_end - xdp.data_meta + sinfo->xdp_frags_size;
-	ret = bpf_test_finish(kattr, uattr, xdp.data_meta, size, retval,
-			      duration);
+	ret = bpf_test_finish(kattr, uattr, xdp.data_meta, sinfo, size,
+			      retval, duration);
 	if (!ret)
 		ret = bpf_ctx_finish(kattr, uattr, ctx,
 				     sizeof(struct xdp_md));
@@ -944,8 +974,8 @@ int bpf_prog_test_run_flow_dissector(struct bpf_prog *prog,
 	if (ret < 0)
 		goto out;
 
-	ret = bpf_test_finish(kattr, uattr, &flow_keys, sizeof(flow_keys),
-			      retval, duration);
+	ret = bpf_test_finish(kattr, uattr, &flow_keys, NULL,
+			      sizeof(flow_keys), retval, duration);
 	if (!ret)
 		ret = bpf_ctx_finish(kattr, uattr, user_ctx,
 				     sizeof(struct bpf_flow_keys));
@@ -1049,7 +1079,7 @@ int bpf_prog_test_run_sk_lookup(struct bpf_prog *prog, const union bpf_attr *kat
 		user_ctx->cookie = sock_gen_cookie(ctx.selected_sk);
 	}
 
-	ret = bpf_test_finish(kattr, uattr, NULL, 0, retval, duration);
+	ret = bpf_test_finish(kattr, uattr, NULL, NULL, 0, retval, duration);
 	if (!ret)
 		ret = bpf_ctx_finish(kattr, uattr, user_ctx, sizeof(*user_ctx));
 
Signature · 1 line
2.34.1
#19 lore raw

PATCH v22 17/23 bpf: selftests: update xdp_adjust_tail selftest to include multi-frags

In reply to Lorenzo Bianconi

From: Eelco Chaudron <[email protected]>

This change adds test cases for the multi-frags scenarios when shrinking and growing.

---
 .../bpf/prog_tests/xdp_adjust_tail.c          | 131 ++++++++++++++++++
 .../bpf/progs/test_xdp_adjust_tail_grow.c     |  10 +-
 .../bpf/progs/test_xdp_adjust_tail_shrink.c   |  32 ++++-
 3 files changed, 166 insertions(+), 7 deletions(-)
tools/testing/selftests/bpf/prog_tests/xdp_adjust_tail.c +131 -0
index 3f5a17c38be5..c38be5155afa 100644
@@ -130,6 +130,133 @@ static void test_xdp_adjust_tail_grow2(void)
 	bpf_object__close(obj);
 }
 
+void test_xdp_adjust_multi_frags_tail_shrink(void)
+{
+	const char *file = "./test_xdp_adjust_tail_shrink.o";
+	__u32 duration, retval, size, exp_size;
+	struct bpf_program *prog;
+	struct bpf_object *obj;
+	int err, prog_fd;
+	__u8 *buf;
+
+	/* For the individual test cases, the first byte in the packet
+	 * indicates which test will be run.
+	 */
+	obj = bpf_object__open(file);
+	if (libbpf_get_error(obj))
+		return;
+
+	prog = bpf_object__next_program(obj, NULL);
+	if (bpf_object__load(obj))
+		return;
+
+	prog_fd = bpf_program__fd(prog);
+
+	buf = malloc(9000);
+	if (CHECK(!buf, "malloc()", "error:%s\n", strerror(errno)))
+		goto out;
+
+	memset(buf, 0, 9000);
+
+	/* Test case removing 10 bytes from last frag, NOT freeing it */
+	exp_size = 8990; /* 9000 - 10 */
+	err = bpf_prog_test_run(prog_fd, 1, buf, 9000,
+				buf, &size, &retval, &duration);
+
+	CHECK(err || retval != XDP_TX || size != exp_size,
+	      "9k-10b", "err %d errno %d retval %d[%d] size %d[%u]\n",
+	      err, errno, retval, XDP_TX, size, exp_size);
+
+	/* Test case removing one of two pages, assuming 4K pages */
+	buf[0] = 1;
+	exp_size = 4900; /* 9000 - 4100 */
+	err = bpf_prog_test_run(prog_fd, 1, buf, 9000,
+				buf, &size, &retval, &duration);
+
+	CHECK(err || retval != XDP_TX || size != exp_size,
+	      "9k-1p", "err %d errno %d retval %d[%d] size %d[%u]\n",
+	      err, errno, retval, XDP_TX, size, exp_size);
+
+	/* Test case removing two pages resulting in a linear xdp_buff */
+	buf[0] = 2;
+	exp_size = 800; /* 9000 - 8200 */
+	err = bpf_prog_test_run(prog_fd, 1, buf, 9000,
+				buf, &size, &retval, &duration);
+
+	CHECK(err || retval != XDP_TX || size != exp_size,
+	      "9k-2p", "err %d errno %d retval %d[%d] size %d[%u]\n",
+	      err, errno, retval, XDP_TX, size, exp_size);
+
+	free(buf);
+out:
+	bpf_object__close(obj);
+}
+
+void test_xdp_adjust_multi_frags_tail_grow(void)
+{
+	const char *file = "./test_xdp_adjust_tail_grow.o";
+	__u32 duration, retval, size, exp_size;
+	struct bpf_program *prog;
+	struct bpf_object *obj;
+	int err, i, prog_fd;
+	__u8 *buf;
+
+	obj = bpf_object__open(file);
+	if (libbpf_get_error(obj))
+		return;
+
+	prog = bpf_object__next_program(obj, NULL);
+	if (bpf_object__load(obj))
+		return;
+
+	prog_fd = bpf_program__fd(prog);
+
+	buf = malloc(16384);
+	if (CHECK(!buf, "malloc()", "error:%s\n", strerror(errno)))
+		goto out;
+
+	/* Test case add 10 bytes to last frag */
+	memset(buf, 1, 16384);
+	size = 9000;
+	exp_size = size + 10;
+	err = bpf_prog_test_run(prog_fd, 1, buf, size,
+				buf, &size, &retval, &duration);
+
+	CHECK(err || retval != XDP_TX || size != exp_size,
+	      "9k+10b", "err %d retval %d[%d] size %d[%u]\n",
+	      err, retval, XDP_TX, size, exp_size);
+
+	for (i = 0; i < 9000; i++)
+		CHECK(buf[i] != 1, "9k+10b-old",
+		      "Old data not all ok, offset %i is failing [%u]!\n",
+		      i, buf[i]);
+
+	for (i = 9000; i < 9010; i++)
+		CHECK(buf[i] != 0, "9k+10b-new",
+		      "New data not all ok, offset %i is failing [%u]!\n",
+		      i, buf[i]);
+
+	for (i = 9010; i < 16384; i++)
+		CHECK(buf[i] != 1, "9k+10b-untouched",
+		      "Unused data not all ok, offset %i is failing [%u]!\n",
+		      i, buf[i]);
+
+	/* Test a too large grow */
+	memset(buf, 1, 16384);
+	size = 9001;
+	exp_size = size;
+	err = bpf_prog_test_run(prog_fd, 1, buf, size,
+				buf, &size, &retval, &duration);
+
+	CHECK(err || retval != XDP_DROP || size != exp_size,
+	      "9k+10b", "err %d retval %d[%d] size %d[%u]\n",
+	      err, retval, XDP_TX, size, exp_size);
+
+	free(buf);
+out:
+	bpf_object__close(obj);
+}
+
 void test_xdp_adjust_tail(void)
 {
 	if (test__start_subtest("xdp_adjust_tail_shrink"))
@@ -138,4 +265,8 @@ void test_xdp_adjust_tail(void)
 		test_xdp_adjust_tail_grow();
 	if (test__start_subtest("xdp_adjust_tail_grow2"))
 		test_xdp_adjust_tail_grow2();
+	if (test__start_subtest("xdp_adjust_multi_frags_tail_shrink"))
+		test_xdp_adjust_multi_frags_tail_shrink();
+	if (test__start_subtest("xdp_adjust_multi_frags_tail_grow"))
+		test_xdp_adjust_multi_frags_tail_grow();
 }
tools/testing/selftests/bpf/progs/test_xdp_adjust_tail_grow.c +7 -3
index 199c61b7d062..53b64c999450 100644
@@ -7,11 +7,10 @@ int _xdp_adjust_tail_grow(struct xdp_md *xdp)
 {
 	void *data_end = (void *)(long)xdp->data_end;
 	void *data = (void *)(long)xdp->data;
-	unsigned int data_len;
+	int data_len = bpf_xdp_get_buff_len(xdp);
 	int offset = 0;
 
 	/* Data length determine test case */
-	data_len = data_end - data;
 
 	if (data_len == 54) { /* sizeof(pkt_v4) */
 		offset = 4096; /* test too large offset */
@@ -20,7 +19,12 @@ int _xdp_adjust_tail_grow(struct xdp_md *xdp)
 	} else if (data_len == 64) {
 		offset = 128;
 	} else if (data_len == 128) {
-		offset = 4096 - 256 - 320 - data_len; /* Max tail grow 3520 */
+		/* Max tail grow 3520 */
+		offset = 4096 - 256 - 320 - data_len;
+	} else if (data_len == 9000) {
+		offset = 10;
+	} else if (data_len == 9001) {
+		offset = 4096;
 	} else {
 		return XDP_ABORTED; /* No matching test */
 	}
tools/testing/selftests/bpf/progs/test_xdp_adjust_tail_shrink.c +28 -4
index b7448253d135..46bd74aa647f 100644
@@ -12,14 +12,38 @@
 SEC("xdp")
 int _xdp_adjust_tail_shrink(struct xdp_md *xdp)
 {
-	void *data_end = (void *)(long)xdp->data_end;
-	void *data = (void *)(long)xdp->data;
+	__u8 *data_end = (void *)(long)xdp->data_end;
+	__u8 *data = (void *)(long)xdp->data;
 	int offset = 0;
 
-	if (data_end - data == 54) /* sizeof(pkt_v4) */
+	switch (bpf_xdp_get_buff_len(xdp)) {
+	case 54:
+		/* sizeof(pkt_v4) */
 		offset = 256; /* shrink too much */
-	else
+		break;
+	case 9000:
+		/* Multi-frags test cases */
+		if (data + 1 > data_end)
+			return XDP_DROP;
+
+		switch (data[0]) {
+		case 0:
+			offset = 10;
+			break;
+		case 1:
+			offset = 4100;
+			break;
+		case 2:
+			offset = 8200;
+			break;
+		default:
+			return XDP_DROP;
+		}
+		break;
+	default:
 		offset = 20;
+		break;
+	}
 	if (bpf_xdp_adjust_tail(xdp, 0 - offset))
 		return XDP_DROP;
 	return XDP_TX;
Signature · 1 line
2.34.1
#20 lore raw

Re: [PATCH v22 bpf-next 17/23] bpf: selftests: update xdp_adjust_tail selftest to include multi-frags

Quoted 4 lines · Lorenzo Bianconi
tools/testing/selftests/bpf/prog_tests/xdp_adjust_tail.c +4 -0
+
+	CHECK(err || retval != XDP_TX || size != exp_size,
+	      "9k-10b", "err %d errno %d retval %d[%d] size %d[%u]\n",
+	      err, errno, retval, XDP_TX, size, exp_size);

...

Quoted 3 lines
tools/testing/selftests/bpf/prog_tests/xdp_adjust_tail.c +3 -0
+	CHECK(err || retval != XDP_TX || size != exp_size,
+	      "9k-1p", "err %d errno %d retval %d[%d] size %d[%u]\n",
+	      err, errno, retval, XDP_TX, size, exp_size);

...

tools/testing/selftests/bpf/prog_tests/xdp_adjust_tail.c static void test_xdp_adjust_tail_grow2(void) · line 188

Quoted 3 lines
tools/testing/selftests/bpf/prog_tests/xdp_adjust_tail.c +3 -0
+	CHECK(err || retval != XDP_TX || size != exp_size,
+	      "9k-2p", "err %d errno %d retval %d[%d] size %d[%u]\n",
+	      err, errno, retval, XDP_TX, size, exp_size);

CHECK is deprecated.
That nit was mentioned many times. Please address it in all patches.

#21 lore raw

Re: [PATCH v22 bpf-next 17/23] bpf: selftests: update xdp_adjust_tail selftest to include multi-frags

Quoted 10 lines · Lorenzo Bianconi
Quoted 4 lines
tools/testing/selftests/bpf/prog_tests/xdp_adjust_tail.c +4 -0
+
+	CHECK(err || retval != XDP_TX || size != exp_size,
+	      "9k-10b", "err %d errno %d retval %d[%d] size %d[%u]\n",
+	      err, errno, retval, XDP_TX, size, exp_size);

...

Quoted 3 lines
tools/testing/selftests/bpf/prog_tests/xdp_adjust_tail.c +3 -0
+	CHECK(err || retval != XDP_TX || size != exp_size,
+	      "9k-1p", "err %d errno %d retval %d[%d] size %d[%u]\n",
+	      err, errno, retval, XDP_TX, size, exp_size);

...

Quoted 6 lines

tools/testing/selftests/bpf/prog_tests/xdp_adjust_tail.c static void test_xdp_adjust_tail_grow2(void) · line 188

Quoted 3 lines
tools/testing/selftests/bpf/prog_tests/xdp_adjust_tail.c +3 -0
+	CHECK(err || retval != XDP_TX || size != exp_size,
+	      "9k-2p", "err %d errno %d retval %d[%d] size %d[%u]\n",
+	      err, errno, retval, XDP_TX, size, exp_size);

CHECK is deprecated.
That nit was mentioned many times. Please address it in all patches.

I kept the CHECK macro because there were other CHECK occurrences in xdp_adjust_tail.c (e.g. in test_xdp_adjust_tail_grow()). I guess we can add a preliminary patch to convert the other CHECK occurrences used in xdp_adjust_tail.c (the same for xdp_bpf2bpf.c). What do you think?

Regards,
Lorenzo

#22 lore raw

Re: [PATCH v22 bpf-next 17/23] bpf: selftests: update xdp_adjust_tail selftest to include multi-frags

Quoted 15 lines · Lorenzo Bianconi
Quoted 15 lines · Lorenzo Bianconi
Quoted 4 lines
tools/testing/selftests/bpf/prog_tests/xdp_adjust_tail.c +4 -0
+
+   CHECK(err || retval != XDP_TX || size != exp_size,
+         "9k-10b", "err %d errno %d retval %d[%d] size %d[%u]\n",
+         err, errno, retval, XDP_TX, size, exp_size);

...

Quoted 3 lines
tools/testing/selftests/bpf/prog_tests/xdp_adjust_tail.c +3 -0
+   CHECK(err || retval != XDP_TX || size != exp_size,
+         "9k-1p", "err %d errno %d retval %d[%d] size %d[%u]\n",
+         err, errno, retval, XDP_TX, size, exp_size);

...

Quoted 3 lines
tools/testing/selftests/bpf/prog_tests/xdp_adjust_tail.c +3 -0
+   CHECK(err || retval != XDP_TX || size != exp_size,
+         "9k-2p", "err %d errno %d retval %d[%d] size %d[%u]\n",
+         err, errno, retval, XDP_TX, size, exp_size);
Quoted 8 lines
Quoted 2 lines

CHECK is deprecated.
That nit was mentioned many times. Please address it in all patches.

I kept the CHECK macro because there were other CHECK occurrences in xdp_adjust_tail.c (e.g. in test_xdp_adjust_tail_grow()). I guess we can add a preliminary patch to convert the other CHECK occurrences used in xdp_adjust_tail.c (the same for xdp_bpf2bpf.c). What do you think?

Please do.

#23 lore raw

PATCH v22 18/23 libbpf: Add SEC name for xdp multi-frags programs

In reply to Lorenzo Bianconi

Introduce support for the following SEC entries for XDP multi-frags property:
- SEC("xdp.frags")
- SEC("xdp.frags/devmap")
- SEC("xdp.frags/cpumap")

---
 tools/lib/bpf/libbpf.c | 6 ++++++
 1 file changed, 6 insertions(+)
tools/lib/bpf/libbpf.c +6 -0
index fdb3536afa7d..611e81357fb6 100644
@@ -6562,6 +6562,9 @@ static int libbpf_preload_prog(struct bpf_program *prog,
 	if (def & SEC_SLEEPABLE)
 		opts->prog_flags |= BPF_F_SLEEPABLE;
 
+	if (prog->type == BPF_PROG_TYPE_XDP && strstr(prog->sec_name, ".frags"))
+		opts->prog_flags |= BPF_F_XDP_HAS_FRAGS;
+
 	if ((prog->type == BPF_PROG_TYPE_TRACING ||
 	     prog->type == BPF_PROG_TYPE_LSM ||
 	     prog->type == BPF_PROG_TYPE_EXT) && !prog->attach_btf_id) {
@@ -8600,8 +8603,11 @@ static const struct bpf_sec_def section_defs[] = {
 	SEC_DEF("lsm.s/",		LSM, BPF_LSM_MAC, SEC_ATTACH_BTF | SEC_SLEEPABLE, attach_lsm),
 	SEC_DEF("iter/",		TRACING, BPF_TRACE_ITER, SEC_ATTACH_BTF, attach_iter),
 	SEC_DEF("syscall",		SYSCALL, 0, SEC_SLEEPABLE),
+	SEC_DEF("xdp.frags/devmap",	XDP, BPF_XDP_DEVMAP, SEC_NONE),
 	SEC_DEF("xdp_devmap/",		XDP, BPF_XDP_DEVMAP, SEC_ATTACHABLE),
+	SEC_DEF("xdp.frags/cpumap",	XDP, BPF_XDP_CPUMAP, SEC_NONE),
 	SEC_DEF("xdp_cpumap/",		XDP, BPF_XDP_CPUMAP, SEC_ATTACHABLE),
+	SEC_DEF("xdp.frags",		XDP, BPF_XDP, SEC_NONE),
 	SEC_DEF("xdp",			XDP, BPF_XDP, SEC_ATTACHABLE_OPT | SEC_SLOPPY_PFX),
 	SEC_DEF("perf_event",		PERF_EVENT, 0, SEC_NONE | SEC_SLOPPY_PFX),
 	SEC_DEF("lwt_in",		LWT_IN, 0, SEC_NONE | SEC_SLOPPY_PFX),
Signature · 1 line
2.34.1
#24 lore raw

Re: [PATCH v22 bpf-next 18/23] libbpf: Add SEC name for xdp multi-frags programs

Quoted 18 lines · Lorenzo Bianconi

Introduce support for the following SEC entries for XDP multi-frags property:
- SEC("xdp.frags")
- SEC("xdp.frags/devmap")
- SEC("xdp.frags/cpumap")

---
 tools/lib/bpf/libbpf.c | 6 ++++++
 1 file changed, 6 insertions(+)
tools/lib/bpf/libbpf.c +0 -0
index fdb3536afa7d..611e81357fb6 100644

tools/lib/bpf/libbpf.c static int libbpf_preload_prog(struct bpf_program *prog, · line 6566

Quoted 5 lines
tools/lib/bpf/libbpf.c +2 -0
@@ -6562,6 +6562,9 @@ static int libbpf_preload_prog(struct bpf_program *prog,
 	if (def & SEC_SLEEPABLE)
 		opts->prog_flags |= BPF_F_SLEEPABLE;
 
+	if (prog->type == BPF_PROG_TYPE_XDP && strstr(prog->sec_name, ".frags"))
+		opts->prog_flags |= BPF_F_XDP_HAS_FRAGS;

That's a bit sloppy.
Could you handle it similar to SEC_SLEEPABLE?

tools/lib/bpf/libbpf.c static const struct bpf_sec_def section_defs[] = { · line 8610

Quoted 13 lines
tools/lib/bpf/libbpf.c +4 -0
+
 	if ((prog->type == BPF_PROG_TYPE_TRACING ||
 	     prog->type == BPF_PROG_TYPE_LSM ||
 	     prog->type == BPF_PROG_TYPE_EXT) && !prog->attach_btf_id) {
@@ -8600,8 +8603,11 @@ static const struct bpf_sec_def section_defs[] = {
 	SEC_DEF("lsm.s/",		LSM, BPF_LSM_MAC, SEC_ATTACH_BTF | SEC_SLEEPABLE, attach_lsm),
 	SEC_DEF("iter/",		TRACING, BPF_TRACE_ITER, SEC_ATTACH_BTF, attach_iter),
 	SEC_DEF("syscall",		SYSCALL, 0, SEC_SLEEPABLE),
+	SEC_DEF("xdp.frags/devmap",	XDP, BPF_XDP_DEVMAP, SEC_NONE),
 	SEC_DEF("xdp_devmap/",		XDP, BPF_XDP_DEVMAP, SEC_ATTACHABLE),
+	SEC_DEF("xdp.frags/cpumap",	XDP, BPF_XDP_CPUMAP, SEC_NONE),
 	SEC_DEF("xdp_cpumap/",		XDP, BPF_XDP_CPUMAP, SEC_ATTACHABLE),
+	SEC_DEF("xdp.frags",		XDP, BPF_XDP, SEC_NONE),

It would be SEC_FRAGS here instead of SEC_NONE.

Quoted 6 lines
tools/lib/bpf/libbpf.c +0 -0
 	SEC_DEF("xdp",			XDP, BPF_XDP, SEC_ATTACHABLE_OPT | SEC_SLOPPY_PFX),
 	SEC_DEF("perf_event",		PERF_EVENT, 0, SEC_NONE | SEC_SLOPPY_PFX),
 	SEC_DEF("lwt_in",		LWT_IN, 0, SEC_NONE | SEC_SLOPPY_PFX),
Signature · 1 line
2.34.1
#25 lore raw

Re: [PATCH v22 bpf-next 18/23] libbpf: Add SEC name for xdp multi-frags programs

Quoted 28 lines · Lorenzo Bianconi
Quoted 18 lines

Introduce support for the following SEC entries for XDP multi-frags property:
- SEC("xdp.frags")
- SEC("xdp.frags/devmap")
- SEC("xdp.frags/cpumap")

---
 tools/lib/bpf/libbpf.c | 6 ++++++
 1 file changed, 6 insertions(+)
tools/lib/bpf/libbpf.c +0 -0
index fdb3536afa7d..611e81357fb6 100644

tools/lib/bpf/libbpf.c static int libbpf_preload_prog(struct bpf_program *prog, · line 6566

Quoted 5 lines
tools/lib/bpf/libbpf.c +2 -0
@@ -6562,6 +6562,9 @@ static int libbpf_preload_prog(struct bpf_program *prog,
 	if (def & SEC_SLEEPABLE)
 		opts->prog_flags |= BPF_F_SLEEPABLE;
 
+	if (prog->type == BPF_PROG_TYPE_XDP && strstr(prog->sec_name, ".frags"))
+		opts->prog_flags |= BPF_F_XDP_HAS_FRAGS;

That's a bit sloppy.
Could you handle it similar to SEC_SLEEPABLE?

Quoted 15 lines

tools/lib/bpf/libbpf.c static const struct bpf_sec_def section_defs[] = { · line 8610

Quoted 13 lines
tools/lib/bpf/libbpf.c +4 -0
+
 	if ((prog->type == BPF_PROG_TYPE_TRACING ||
 	     prog->type == BPF_PROG_TYPE_LSM ||
 	     prog->type == BPF_PROG_TYPE_EXT) && !prog->attach_btf_id) {
@@ -8600,8 +8603,11 @@ static const struct bpf_sec_def section_defs[] = {
 	SEC_DEF("lsm.s/",		LSM, BPF_LSM_MAC, SEC_ATTACH_BTF | SEC_SLEEPABLE, attach_lsm),
 	SEC_DEF("iter/",		TRACING, BPF_TRACE_ITER, SEC_ATTACH_BTF, attach_iter),
 	SEC_DEF("syscall",		SYSCALL, 0, SEC_SLEEPABLE),
+	SEC_DEF("xdp.frags/devmap",	XDP, BPF_XDP_DEVMAP, SEC_NONE),
 	SEC_DEF("xdp_devmap/",		XDP, BPF_XDP_DEVMAP, SEC_ATTACHABLE),
+	SEC_DEF("xdp.frags/cpumap",	XDP, BPF_XDP_CPUMAP, SEC_NONE),
 	SEC_DEF("xdp_cpumap/",		XDP, BPF_XDP_CPUMAP, SEC_ATTACHABLE),
+	SEC_DEF("xdp.frags",		XDP, BPF_XDP, SEC_NONE),

It would be SEC_FRAGS here instead of SEC_NONE.

ack, I dropped SEC_FRAGS (SEC_XDP_MB before) from sec_def_flags because Andrii asked to remove it but I am fine to add it back. Agree?

Regards,
Lorenzo

Quoted 9 lines
Quoted 7 lines
tools/lib/bpf/libbpf.c +0 -0
 	SEC_DEF("xdp",			XDP, BPF_XDP, SEC_ATTACHABLE_OPT | SEC_SLOPPY_PFX),
 	SEC_DEF("perf_event",		PERF_EVENT, 0, SEC_NONE | SEC_SLOPPY_PFX),
 	SEC_DEF("lwt_in",		LWT_IN, 0, SEC_NONE | SEC_SLOPPY_PFX),
Signature · 1 line
2.34.1
#26 lore raw

Re: [PATCH v22 bpf-next 18/23] libbpf: Add SEC name for xdp multi-frags programs

Quoted 45 lines · Lorenzo Bianconi
Quoted 29 lines · Lorenzo Bianconi
Quoted 18 lines

Introduce support for the following SEC entries for XDP multi-frags property:
- SEC("xdp.frags")
- SEC("xdp.frags/devmap")
- SEC("xdp.frags/cpumap")

---
 tools/lib/bpf/libbpf.c | 6 ++++++
 1 file changed, 6 insertions(+)
tools/lib/bpf/libbpf.c +0 -0
index fdb3536afa7d..611e81357fb6 100644

tools/lib/bpf/libbpf.c static int libbpf_preload_prog(struct bpf_program *prog, · line 6566

Quoted 5 lines
tools/lib/bpf/libbpf.c +2 -0
@@ -6562,6 +6562,9 @@ static int libbpf_preload_prog(struct bpf_program *prog,
    if (def & SEC_SLEEPABLE)
            opts->prog_flags |= BPF_F_SLEEPABLE;
 
+   if (prog->type == BPF_PROG_TYPE_XDP && strstr(prog->sec_name, ".frags"))
+           opts->prog_flags |= BPF_F_XDP_HAS_FRAGS;

That's a bit sloppy.
Could you handle it similar to SEC_SLEEPABLE?

Quoted 15 lines

tools/lib/bpf/libbpf.c static const struct bpf_sec_def section_defs[] = { · line 8610

Quoted 13 lines
tools/lib/bpf/libbpf.c +4 -0
+
    if ((prog->type == BPF_PROG_TYPE_TRACING ||
         prog->type == BPF_PROG_TYPE_LSM ||
         prog->type == BPF_PROG_TYPE_EXT) && !prog->attach_btf_id) {
@@ -8600,8 +8603,11 @@ static const struct bpf_sec_def section_defs[] = {
    SEC_DEF("lsm.s/",               LSM, BPF_LSM_MAC, SEC_ATTACH_BTF | SEC_SLEEPABLE, attach_lsm),
    SEC_DEF("iter/",                TRACING, BPF_TRACE_ITER, SEC_ATTACH_BTF, attach_iter),
    SEC_DEF("syscall",              SYSCALL, 0, SEC_SLEEPABLE),
+   SEC_DEF("xdp.frags/devmap",     XDP, BPF_XDP_DEVMAP, SEC_NONE),
    SEC_DEF("xdp_devmap/",          XDP, BPF_XDP_DEVMAP, SEC_ATTACHABLE),
+   SEC_DEF("xdp.frags/cpumap",     XDP, BPF_XDP_CPUMAP, SEC_NONE),
    SEC_DEF("xdp_cpumap/",          XDP, BPF_XDP_CPUMAP, SEC_ATTACHABLE),
+   SEC_DEF("xdp.frags",            XDP, BPF_XDP, SEC_NONE),

It would be SEC_FRAGS here instead of SEC_NONE.

Quoted 2 lines

ack, I dropped SEC_FRAGS (SEC_XDP_MB before) from sec_def_flags because Andrii asked to remove it but I am fine to add it back. Agree?

Andrii,
what was the motivation?
imo that's cleaner than strstr.

#27 lore raw

Re: [PATCH v22 bpf-next 18/23] libbpf: Add SEC name for xdp multi-frags programs

Quoted 47 lines · Alexei Starovoitov
Quoted 45 lines · Lorenzo Bianconi
Quoted 44 lines · Lorenzo Bianconi
Quoted 18 lines

Introduce support for the following SEC entries for XDP multi-frags property:
- SEC("xdp.frags")
- SEC("xdp.frags/devmap")
- SEC("xdp.frags/cpumap")

---
 tools/lib/bpf/libbpf.c | 6 ++++++
 1 file changed, 6 insertions(+)
tools/lib/bpf/libbpf.c +0 -0
index fdb3536afa7d..611e81357fb6 100644

tools/lib/bpf/libbpf.c static int libbpf_preload_prog(struct bpf_program *prog, · line 6566

Quoted 5 lines
tools/lib/bpf/libbpf.c +2 -0
@@ -6562,6 +6562,9 @@ static int libbpf_preload_prog(struct bpf_program *prog,
    if (def & SEC_SLEEPABLE)
            opts->prog_flags |= BPF_F_SLEEPABLE;
 
+   if (prog->type == BPF_PROG_TYPE_XDP && strstr(prog->sec_name, ".frags"))
+           opts->prog_flags |= BPF_F_XDP_HAS_FRAGS;

That's a bit sloppy.
Could you handle it similar to SEC_SLEEPABLE?

tools/lib/bpf/libbpf.c static const struct bpf_sec_def section_defs[] = { · line 8610

Quoted 13 lines
tools/lib/bpf/libbpf.c +4 -0
+
    if ((prog->type == BPF_PROG_TYPE_TRACING ||
         prog->type == BPF_PROG_TYPE_LSM ||
         prog->type == BPF_PROG_TYPE_EXT) && !prog->attach_btf_id) {
@@ -8600,8 +8603,11 @@ static const struct bpf_sec_def section_defs[] = {
    SEC_DEF("lsm.s/",               LSM, BPF_LSM_MAC, SEC_ATTACH_BTF | SEC_SLEEPABLE, attach_lsm),
    SEC_DEF("iter/",                TRACING, BPF_TRACE_ITER, SEC_ATTACH_BTF, attach_iter),
    SEC_DEF("syscall",              SYSCALL, 0, SEC_SLEEPABLE),
+   SEC_DEF("xdp.frags/devmap",     XDP, BPF_XDP_DEVMAP, SEC_NONE),
    SEC_DEF("xdp_devmap/",          XDP, BPF_XDP_DEVMAP, SEC_ATTACHABLE),
+   SEC_DEF("xdp.frags/cpumap",     XDP, BPF_XDP_CPUMAP, SEC_NONE),
    SEC_DEF("xdp_cpumap/",          XDP, BPF_XDP_CPUMAP, SEC_ATTACHABLE),
+   SEC_DEF("xdp.frags",            XDP, BPF_XDP, SEC_NONE),

It would be SEC_FRAGS here instead of SEC_NONE.

Quoted 6 lines
Quoted 2 lines

ack, I dropped SEC_FRAGS (SEC_XDP_MB before) from sec_def_flags because Andrii asked to remove it but I am fine to add it back. Agree?

Andrii,
what was the motivation?
imo that's cleaner than strstr.

Given it was XDP-specific (as opposed to sleepable flag that applies more widely), it felt cleaner ([0]) to handle that as a special case in libbpf_preload_prog. But I didn't feel that strongly about that back then and still don't, so if you think SEC_FRAGS is better, I'm fine with it. I'd make it SEC_XDP_FRAGS to make it more obvious it's still XDP-specific (there are no plans to extend it to non-XDP, right?).

But whichever way, it's internal implementation detail and pretty small one at that, so I don't care much.

[0] https://lore.kernel.org/bpf/CAEf4BzbfDvH5CYNsWg9Dx7JcFEp4jNmNRR6H-6sJEUxDSy1zZw@mail.gmail.com/

#28 lore raw

Re: [PATCH v22 bpf-next 18/23] libbpf: Add SEC name for xdp multi-frags programs

Quoted 56 lines
Quoted 47 lines · Alexei Starovoitov
Quoted 45 lines · Lorenzo Bianconi
Quoted 44 lines · Lorenzo Bianconi
Quoted 18 lines

Introduce support for the following SEC entries for XDP multi-frags property:
- SEC("xdp.frags")
- SEC("xdp.frags/devmap")
- SEC("xdp.frags/cpumap")

---
 tools/lib/bpf/libbpf.c | 6 ++++++
 1 file changed, 6 insertions(+)
tools/lib/bpf/libbpf.c +0 -0
index fdb3536afa7d..611e81357fb6 100644

tools/lib/bpf/libbpf.c static int libbpf_preload_prog(struct bpf_program *prog, · line 6566

Quoted 5 lines
tools/lib/bpf/libbpf.c +2 -0
@@ -6562,6 +6562,9 @@ static int libbpf_preload_prog(struct bpf_program *prog,
    if (def & SEC_SLEEPABLE)
            opts->prog_flags |= BPF_F_SLEEPABLE;
 
+   if (prog->type == BPF_PROG_TYPE_XDP && strstr(prog->sec_name, ".frags"))
+           opts->prog_flags |= BPF_F_XDP_HAS_FRAGS;

That's a bit sloppy.
Could you handle it similar to SEC_SLEEPABLE?

tools/lib/bpf/libbpf.c static const struct bpf_sec_def section_defs[] = { · line 8610

Quoted 13 lines
tools/lib/bpf/libbpf.c +4 -0
+
    if ((prog->type == BPF_PROG_TYPE_TRACING ||
         prog->type == BPF_PROG_TYPE_LSM ||
         prog->type == BPF_PROG_TYPE_EXT) && !prog->attach_btf_id) {
@@ -8600,8 +8603,11 @@ static const struct bpf_sec_def section_defs[] = {
    SEC_DEF("lsm.s/",               LSM, BPF_LSM_MAC, SEC_ATTACH_BTF | SEC_SLEEPABLE, attach_lsm),
    SEC_DEF("iter/",                TRACING, BPF_TRACE_ITER, SEC_ATTACH_BTF, attach_iter),
    SEC_DEF("syscall",              SYSCALL, 0, SEC_SLEEPABLE),
+   SEC_DEF("xdp.frags/devmap",     XDP, BPF_XDP_DEVMAP, SEC_NONE),
    SEC_DEF("xdp_devmap/",          XDP, BPF_XDP_DEVMAP, SEC_ATTACHABLE),
+   SEC_DEF("xdp.frags/cpumap",     XDP, BPF_XDP_CPUMAP, SEC_NONE),
    SEC_DEF("xdp_cpumap/",          XDP, BPF_XDP_CPUMAP, SEC_ATTACHABLE),
+   SEC_DEF("xdp.frags",            XDP, BPF_XDP, SEC_NONE),

It would be SEC_FRAGS here instead of SEC_NONE.

Quoted 6 lines
Quoted 2 lines

ack, I dropped SEC_FRAGS (SEC_XDP_MB before) from sec_def_flags because Andrii asked to remove it but I am fine to add it back. Agree?

Andrii,
what was the motivation?
imo that's cleaner than strstr.

Quoted 7 lines

Given it was XDP-specific (as opposed to sleepable flag that applies more widely), it felt cleaner ([0]) to handle that as a special case in libbpf_preload_prog. But I didn't feel that strongly about that back then and still don't, so if you think SEC_FRAGS is better, I'm fine with it. I'd make it SEC_XDP_FRAGS to make it more obvious it's still XDP-specific (there are no plans to extend it to non-XDP, right?).

I do not think so and anyway it is an internal flag so we can change it in the future if necessary, right?

Regards,
Lorenzo

Quoted 5 lines

But whichever way, it's internal implementation detail and pretty small one at that, so I don't care much.

[0] https://lore.kernel.org/bpf/CAEf4BzbfDvH5CYNsWg9Dx7JcFEp4jNmNRR6H-6sJEUxDSy1zZw@mail.gmail.com/

#29 lore raw

PATCH v22 19/23 bpf: generalise tail call map compatibility check

In reply to Lorenzo Bianconi

From: Toke Hoiland-Jorgensen <[email protected]>

The check for tail call map compatibility ensures that tail calls only happen between maps of the same type. To ensure backwards compatibility for XDP multi-frags we need a similar type of check for cpumap and devmap programs, so move the state from bpf_array_aux into bpf_map, add xdp_has_frags to the check, and apply the same check to cpumap and devmap.

---
 include/linux/bpf.h   | 30 +++++++++++++++++++-----------
 kernel/bpf/arraymap.c |  4 +---
 kernel/bpf/core.c     | 28 ++++++++++++++--------------
 kernel/bpf/cpumap.c   |  8 +++++---
 kernel/bpf/devmap.c   |  3 ++-
 kernel/bpf/syscall.c  | 21 +++++++++++----------
 6 files changed, 52 insertions(+), 42 deletions(-)
include/linux/bpf.h +19 -11
index 909fa29981fd..251c5e27805e 100644
@@ -194,6 +194,17 @@ struct bpf_map {
 	struct work_struct work;
 	struct mutex freeze_mutex;
 	atomic64_t writecnt;
+	/* 'Ownership' of program-containing map is claimed by the first program
+	 * that is going to use this map or by the first program which FD is
+	 * stored in the map to make sure that all callers and callees have the
+	 * same prog type, JITed flag and xdp_has_frags flag.
+	 */
+	struct {
+		spinlock_t lock;
+		enum bpf_prog_type type;
+		bool jited;
+		bool xdp_has_frags;
+	} owner;
 };
 
 static inline bool map_value_has_spin_lock(const struct bpf_map *map)
@@ -995,16 +1006,6 @@ struct bpf_prog_aux {
 };
 
 struct bpf_array_aux {
-	/* 'Ownership' of prog array is claimed by the first program that
-	 * is going to use this map or by the first program which FD is
-	 * stored in the map to make sure that all callers and callees have
-	 * the same prog type and JITed flag.
-	 */
-	struct {
-		spinlock_t lock;
-		enum bpf_prog_type type;
-		bool jited;
-	} owner;
 	/* Programs with direct jumps into programs part of this array. */
 	struct list_head poke_progs;
 	struct bpf_map *map;
@@ -1179,7 +1180,14 @@ struct bpf_event_entry {
 	struct rcu_head rcu;
 };
 
-bool bpf_prog_array_compatible(struct bpf_array *array, const struct bpf_prog *fp);
+static inline bool map_type_contains_progs(struct bpf_map *map)
+{
+	return map->map_type == BPF_MAP_TYPE_PROG_ARRAY ||
+	       map->map_type == BPF_MAP_TYPE_DEVMAP ||
+	       map->map_type == BPF_MAP_TYPE_CPUMAP;
+}
+
+bool bpf_prog_map_compatible(struct bpf_map *map, const struct bpf_prog *fp);
 int bpf_prog_calc_tag(struct bpf_prog *fp);
 
 const struct bpf_func_proto *bpf_get_trace_printk_proto(void);
kernel/bpf/arraymap.c +1 -3
index c7a5be3bf8be..7f145aefbff8 100644
@@ -837,13 +837,12 @@ static int fd_array_map_delete_elem(struct bpf_map *map, void *key)
 static void *prog_fd_array_get_ptr(struct bpf_map *map,
 				   struct file *map_file, int fd)
 {
-	struct bpf_array *array = container_of(map, struct bpf_array, map);
 	struct bpf_prog *prog = bpf_prog_get(fd);
 
 	if (IS_ERR(prog))
 		return prog;
 
-	if (!bpf_prog_array_compatible(array, prog)) {
+	if (!bpf_prog_map_compatible(map, prog)) {
 		bpf_prog_put(prog);
 		return ERR_PTR(-EINVAL);
 	}
@@ -1071,7 +1070,6 @@ static struct bpf_map *prog_array_map_alloc(union bpf_attr *attr)
 	INIT_WORK(&aux->work, prog_array_map_clear_deferred);
 	INIT_LIST_HEAD(&aux->poke_progs);
 	mutex_init(&aux->poke_mutex);
-	spin_lock_init(&aux->owner.lock);
 
 	map = array_map_alloc(attr);
 	if (IS_ERR(map)) {
kernel/bpf/core.c +14 -14
index de3e5bc6781f..0a1cfd8544b9 100644
@@ -1829,28 +1829,30 @@ static unsigned int __bpf_prog_ret0_warn(const void *ctx,
 }
 #endif
 
-bool bpf_prog_array_compatible(struct bpf_array *array,
-			       const struct bpf_prog *fp)
+bool bpf_prog_map_compatible(struct bpf_map *map,
+			     const struct bpf_prog *fp)
 {
 	bool ret;
 
 	if (fp->kprobe_override)
 		return false;
 
-	spin_lock(&array->aux->owner.lock);
-
-	if (!array->aux->owner.type) {
+	spin_lock(&map->owner.lock);
+	if (!map->owner.type) {
 		/* There's no owner yet where we could check for
 		 * compatibility.
 		 */
-		array->aux->owner.type  = fp->type;
-		array->aux->owner.jited = fp->jited;
+		map->owner.type  = fp->type;
+		map->owner.jited = fp->jited;
+		map->owner.xdp_has_frags = fp->aux->xdp_has_frags;
 		ret = true;
 	} else {
-		ret = array->aux->owner.type  == fp->type &&
-		      array->aux->owner.jited == fp->jited;
+		ret = map->owner.type  == fp->type &&
+		      map->owner.jited == fp->jited &&
+		      map->owner.xdp_has_frags == fp->aux->xdp_has_frags;
 	}
-	spin_unlock(&array->aux->owner.lock);
+	spin_unlock(&map->owner.lock);
+
 	return ret;
 }
 
@@ -1862,13 +1864,11 @@ static int bpf_check_tail_call(const struct bpf_prog *fp)
 	mutex_lock(&aux->used_maps_mutex);
 	for (i = 0; i < aux->used_map_cnt; i++) {
 		struct bpf_map *map = aux->used_maps[i];
-		struct bpf_array *array;
 
-		if (map->map_type != BPF_MAP_TYPE_PROG_ARRAY)
+		if (!map_type_contains_progs(map))
 			continue;
 
-		array = container_of(map, struct bpf_array, map);
-		if (!bpf_prog_array_compatible(array, fp)) {
+		if (!bpf_prog_map_compatible(map, fp)) {
 			ret = -EINVAL;
 			goto out;
 		}
kernel/bpf/cpumap.c +5 -3
index b3e6b9422238..650e5d21f90d 100644
@@ -397,7 +397,8 @@ static int cpu_map_kthread_run(void *data)
 	return 0;
 }
 
-static int __cpu_map_load_bpf_program(struct bpf_cpu_map_entry *rcpu, int fd)
+static int __cpu_map_load_bpf_program(struct bpf_cpu_map_entry *rcpu,
+				      struct bpf_map *map, int fd)
 {
 	struct bpf_prog *prog;
 
@@ -405,7 +406,8 @@ static int __cpu_map_load_bpf_program(struct bpf_cpu_map_entry *rcpu, int fd)
 	if (IS_ERR(prog))
 		return PTR_ERR(prog);
 
-	if (prog->expected_attach_type != BPF_XDP_CPUMAP) {
+	if (prog->expected_attach_type != BPF_XDP_CPUMAP ||
+	    !bpf_prog_map_compatible(map, prog)) {
 		bpf_prog_put(prog);
 		return -EINVAL;
 	}
@@ -457,7 +459,7 @@ __cpu_map_entry_alloc(struct bpf_map *map, struct bpf_cpumap_val *value,
 	rcpu->map_id = map->id;
 	rcpu->value.qsize  = value->qsize;
 
-	if (fd > 0 && __cpu_map_load_bpf_program(rcpu, fd))
+	if (fd > 0 && __cpu_map_load_bpf_program(rcpu, map, fd))
 		goto free_ptr_ring;
 
 	/* Setup kthread */
kernel/bpf/devmap.c +2 -1
index fe019dbdb3f0..038f6d7a83e4 100644
@@ -858,7 +858,8 @@ static struct bpf_dtab_netdev *__dev_map_alloc_node(struct net *net,
 					     BPF_PROG_TYPE_XDP, false);
 		if (IS_ERR(prog))
 			goto err_put_dev;
-		if (prog->expected_attach_type != BPF_XDP_DEVMAP)
+		if (prog->expected_attach_type != BPF_XDP_DEVMAP ||
+		    !bpf_prog_map_compatible(&dtab->map, prog))
 			goto err_put_prog;
 	}
 
kernel/bpf/syscall.c +11 -10
index e3c9deb7e25f..2c50d26814d9 100644
@@ -556,16 +556,15 @@ static unsigned long bpf_map_memory_footprint(const struct bpf_map *map)
 
 static void bpf_map_show_fdinfo(struct seq_file *m, struct file *filp)
 {
-	const struct bpf_map *map = filp->private_data;
-	const struct bpf_array *array;
-	u32 type = 0, jited = 0;
-
-	if (map->map_type == BPF_MAP_TYPE_PROG_ARRAY) {
-		array = container_of(map, struct bpf_array, map);
-		spin_lock(&array->aux->owner.lock);
-		type  = array->aux->owner.type;
-		jited = array->aux->owner.jited;
-		spin_unlock(&array->aux->owner.lock);
+	struct bpf_map *map = filp->private_data;
+	u32 type = 0, jited = 0, xdp_has_frags = 0;
+
+	if (map_type_contains_progs(map)) {
+		spin_lock(&map->owner.lock);
+		type  = map->owner.type;
+		jited = map->owner.jited;
+		xdp_has_frags = map->owner.xdp_has_frags;
+		spin_unlock(&map->owner.lock);
 	}
 
 	seq_printf(m,
@@ -590,6 +589,7 @@ static void bpf_map_show_fdinfo(struct seq_file *m, struct file *filp)
 	if (type) {
 		seq_printf(m, "owner_prog_type:\t%u\n", type);
 		seq_printf(m, "owner_jited:\t%u\n", jited);
+		seq_printf(m, "owner_xdp_has_frags:\t%u\n", xdp_has_frags);
 	}
 }
 #endif
@@ -874,6 +874,7 @@ static int map_create(union bpf_attr *attr)
 	atomic64_set(&map->refcnt, 1);
 	atomic64_set(&map->usercnt, 1);
 	mutex_init(&map->freeze_mutex);
+	spin_lock_init(&map->owner.lock);
 
 	map->spin_lock_off = -EINVAL;
 	map->timer_off = -EINVAL;
Signature · 1 line
2.34.1
#30 lore raw

Re: [PATCH v22 bpf-next 19/23] bpf: generalise tail call map compatibility check

kernel/bpf/syscall.c static void bpf_map_show_fdinfo(struct seq_file *m, struct file *filp) · line 592

Quoted 6 lines · Lorenzo Bianconi
kernel/bpf/syscall.c +1 -0
 	seq_printf(m,
@@ -590,6 +589,7 @@ static void bpf_map_show_fdinfo(struct seq_file *m, struct file *filp)
 	if (type) {
 		seq_printf(m, "owner_prog_type:\t%u\n", type);
 		seq_printf(m, "owner_jited:\t%u\n", jited);
+		seq_printf(m, "owner_xdp_has_frags:\t%u\n", xdp_has_frags);

Internal flag shouldn't be printed in fdinfo.
In particular it's not correct for non-xdp progs.

#31 lore raw

Re: [PATCH v22 bpf-next 19/23] bpf: generalise tail call map compatibility check

Quoted 10 lines · Lorenzo Bianconi

kernel/bpf/syscall.c static void bpf_map_show_fdinfo(struct seq_file *m, struct file *filp) · line 592

Quoted 6 lines
kernel/bpf/syscall.c +1 -0
 	seq_printf(m,
@@ -590,6 +589,7 @@ static void bpf_map_show_fdinfo(struct seq_file *m, struct file *filp)
 	if (type) {
 		seq_printf(m, "owner_prog_type:\t%u\n", type);
 		seq_printf(m, "owner_jited:\t%u\n", jited);
+		seq_printf(m, "owner_xdp_has_frags:\t%u\n", xdp_has_frags);

Internal flag shouldn't be printed in fdinfo.
In particular it's not correct for non-xdp progs.

ack, I will drop owner_xdp_has_frags.

Regards,
Lorenzo

#32 lore raw

PATCH v22 20/23 net: xdp: introduce bpf_xdp_pointer utility routine

In reply to Lorenzo Bianconi

Similar to skb_header_pointer, introduce bpf_xdp_pointer utility routine to return a pointer to a given position in the xdp_buff if the requested area (offset + len) is contained in a contiguous memory area otherwise it will be copied in a bounce buffer provided by the caller. Similar to the tc counterpart, introduce the two following xdp helpers:
- bpf_xdp_load_bytes
- bpf_xdp_store_bytes

---
 include/uapi/linux/bpf.h       |  18 ++++
 net/core/filter.c              | 176 ++++++++++++++++++++++++++-------
 tools/include/uapi/linux/bpf.h |  18 ++++
 3 files changed, 174 insertions(+), 38 deletions(-)
include/uapi/linux/bpf.h +18 -0
index 26c6c2bc6b43..1000e071da70 100644
@@ -5029,6 +5029,22 @@ union bpf_attr {
  *		Get the total size of a given xdp buff (linear and paged area)
  *	Return
  *		The total size of a given xdp buffer.
+ *
+ * long bpf_xdp_load_bytes(struct xdp_buff *xdp_md, u32 offset, void *buf, u32 len)
+ *	Description
+ *		This helper is provided as an easy way to load data from a
+ *		xdp buffer. It can be used to load *len* bytes from *offset* from
+ *		the frame associated to *xdp_md*, into the buffer pointed by
+ *		*buf*.
+ *	Return
+ *		0 on success, or a negative error in case of failure.
+ *
+ * long bpf_xdp_store_bytes(struct xdp_buff *xdp_md, u32 offset, void *buf, u32 len)
+ *	Description
+ *		Store *len* bytes from buffer *buf* into the frame
+ *		associated to *xdp_md*, at *offset*.
+ *	Return
+ *		0 on success, or a negative error in case of failure.
  */
 #define __BPF_FUNC_MAPPER(FN)		\
 	FN(unspec),			\
@@ -5218,6 +5234,8 @@ union bpf_attr {
 	FN(get_func_ret),		\
 	FN(get_func_arg_cnt),		\
 	FN(xdp_get_buff_len),		\
+	FN(xdp_load_bytes),		\
+	FN(xdp_store_bytes),		\
 	/* */
 
 /* integer value in 'imm' field of BPF_CALL instruction selects which helper
net/core/filter.c +138 -38

198 lines not on this page · raw message

tools/include/uapi/linux/bpf.h +18 -0
index 26c6c2bc6b43..1000e071da70 100644
@@ -5029,6 +5029,22 @@ union bpf_attr {
  *		Get the total size of a given xdp buff (linear and paged area)
  *	Return
  *		The total size of a given xdp buffer.
+ *
+ * long bpf_xdp_load_bytes(struct xdp_buff *xdp_md, u32 offset, void *buf, u32 len)
+ *	Description
+ *		This helper is provided as an easy way to load data from a
+ *		xdp buffer. It can be used to load *len* bytes from *offset* from
+ *		the frame associated to *xdp_md*, into the buffer pointed by
+ *		*buf*.
+ *	Return
+ *		0 on success, or a negative error in case of failure.
+ *
+ * long bpf_xdp_store_bytes(struct xdp_buff *xdp_md, u32 offset, void *buf, u32 len)
+ *	Description
+ *		Store *len* bytes from buffer *buf* into the frame
+ *		associated to *xdp_md*, at *offset*.
+ *	Return
+ *		0 on success, or a negative error in case of failure.
  */
 #define __BPF_FUNC_MAPPER(FN)		\
 	FN(unspec),			\
@@ -5218,6 +5234,8 @@ union bpf_attr {
 	FN(get_func_ret),		\
 	FN(get_func_arg_cnt),		\
 	FN(xdp_get_buff_len),		\
+	FN(xdp_load_bytes),		\
+	FN(xdp_store_bytes),		\
 	/* */
 
 /* integer value in 'imm' field of BPF_CALL instruction selects which helper
Signature · 1 line
2.34.1
#33 lore raw

PATCH v22 21/23 bpf: selftests: introduce bpf_xdp_{load,store}_bytes selftest

In reply to Lorenzo Bianconi

Introduce kernel selftest for new bpf_xdp_{load,store}_bytes helpers. and bpf_xdp_pointer/bpf_xdp_copy_buf utility routines.

---
 .../bpf/prog_tests/xdp_adjust_frags.c         | 98 +++++++++++++++++++
 .../bpf/progs/test_xdp_update_frags.c         | 42 ++++++++
 2 files changed, 140 insertions(+)
 create mode 100644 tools/testing/selftests/bpf/prog_tests/xdp_adjust_frags.c
 create mode 100644 tools/testing/selftests/bpf/progs/test_xdp_update_frags.c
tools/testing/selftests/bpf/prog_tests/xdp_adjust_frags.c new file +98 -0
new file mode 100644
index 000000000000..956d1ff23902
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <test_progs.h>
+#include <network_helpers.h>
+
+void test_xdp_update_frags(void)
+{
+	const char *file = "./test_xdp_update_frags.o";
+	__u32 duration, retval, size;
+	struct bpf_program *prog;
+	struct bpf_object *obj;
+	int err, prog_fd;
+	__u32 *offset;
+	__u8 *buf;
+
+	obj = bpf_object__open(file);
+	if (libbpf_get_error(obj))
+		return;
+
+	prog = bpf_object__next_program(obj, NULL);
+	if (bpf_object__load(obj))
+		return;
+
+	prog_fd = bpf_program__fd(prog);
+
+	buf = malloc(128);
+	if (ASSERT_TRUE(buf, "alloc buf 128b"))
+		goto out;
+
+	memset(buf, 0, 128);
+	offset = (__u32 *)buf;
+	*offset = 16;
+	buf[*offset] = 0xaa;		/* marker at offset 16 (head) */
+	buf[*offset + 15] = 0xaa;	/* marker at offset 31 (head) */
+
+	err = bpf_prog_test_run(prog_fd, 1, buf, 128,
+				buf, &size, &retval, &duration);
+
+	/* test_xdp_update_frags: buf[16,31]: 0xaa -> 0xbb */
+	ASSERT_OK(err || retval != XDP_PASS ||
+		  buf[16] != 0xbb || buf[31] != 0xbb,
+		  "xdp_update_frags buf[16,31]");
+	free(buf);
+
+	buf = malloc(9000);
+	if (ASSERT_TRUE(buf, "alloc buf 9Kb"))
+		goto out;
+
+	memset(buf, 0, 9000);
+	offset = (__u32 *)buf;
+	*offset = 5000;
+	buf[*offset] = 0xaa;		/* marker at offset 5000 (frag0) */
+	buf[*offset + 15] = 0xaa;	/* marker at offset 5015 (frag0) */
+
+	err = bpf_prog_test_run(prog_fd, 1, buf, 9000,
+				buf, &size, &retval, &duration);
+
+	/* test_xdp_update_frags: buf[5000,5015]: 0xaa -> 0xbb */
+	ASSERT_OK(err || retval != XDP_PASS ||
+		  buf[5000] != 0xbb || buf[5015] != 0xbb,
+		  "xdp_update_frags buf[5000,5015]");
+
+	memset(buf, 0, 9000);
+	offset = (__u32 *)buf;
+	*offset = 3510;
+	buf[*offset] = 0xaa;		/* marker at offset 3510 (head) */
+	buf[*offset + 15] = 0xaa;	/* marker at offset 3525 (frag0) */
+
+	err = bpf_prog_test_run(prog_fd, 1, buf, 9000,
+				buf, &size, &retval, &duration);
+
+	/* test_xdp_update_frags: buf[3510,3525]: 0xaa -> 0xbb */
+	ASSERT_OK(err || retval != XDP_PASS ||
+		  buf[3510] != 0xbb || buf[3525] != 0xbb,
+		  "xdp_update_frags buf[3510,3525]");
+
+	memset(buf, 0, 9000);
+	offset = (__u32 *)buf;
+	*offset = 7606;
+	buf[*offset] = 0xaa;		/* marker at offset 7606 (frag0) */
+	buf[*offset + 15] = 0xaa;	/* marker at offset 7621 (frag1) */
+
+	err = bpf_prog_test_run(prog_fd, 1, buf, 9000,
+				buf, &size, &retval, &duration);
+
+	/* test_xdp_update_frags: buf[7606,7621]: 0xaa -> 0xbb */
+	ASSERT_OK(err || retval != XDP_PASS ||
+		  buf[7606] != 0xbb || buf[7621] != 0xbb,
+		  "xdp_update_frags buf[7606,7621]");
+	free(buf);
+out:
+	bpf_object__close(obj);
+}
+
+void test_xdp_adjust_frags(void)
+{
+	if (test__start_subtest("xdp_adjust_frags"))
+		test_xdp_update_frags();
+}
tools/testing/selftests/bpf/progs/test_xdp_update_frags.c new file +42 -0

42 lines not on this page · raw message

Signature · 1 line
2.34.1
#34 lore raw

PATCH v22 22/23 bpf: selftests: add CPUMAP/DEVMAP selftests for xdp multi-frags

In reply to Lorenzo Bianconi

Verify compatibility checks attaching a XDP multi-frags program to a CPUMAP/DEVMAP

---
 .../bpf/prog_tests/xdp_cpumap_attach.c        | 64 ++++++++++++++++++-
 .../bpf/prog_tests/xdp_devmap_attach.c        | 55 ++++++++++++++++
 .../bpf/progs/test_xdp_with_cpumap_helpers.c  |  6 ++
 ...test_xdp_with_cpumap_multi_frags_helpers.c | 27 ++++++++
 .../bpf/progs/test_xdp_with_devmap_helpers.c  |  7 ++
 ...test_xdp_with_devmap_multi_frags_helpers.c | 27 ++++++++
 6 files changed, 185 insertions(+), 1 deletion(-)
 create mode 100644 tools/testing/selftests/bpf/progs/test_xdp_with_cpumap_multi_frags_helpers.c
 create mode 100644 tools/testing/selftests/bpf/progs/test_xdp_with_devmap_multi_frags_helpers.c
tools/testing/selftests/bpf/prog_tests/xdp_cpumap_attach.c +63 -1
index fd812bd43600..acef8534ec65 100644
@@ -3,11 +3,12 @@
 #include <linux/if_link.h>
 #include <test_progs.h>
 
+#include "test_xdp_with_cpumap_multi_frags_helpers.skel.h"
 #include "test_xdp_with_cpumap_helpers.skel.h"
 
 #define IFINDEX_LO	1
 
-void serial_test_xdp_cpumap_attach(void)
+void test_xdp_with_cpumap_helpers(void)
 {
 	struct test_xdp_with_cpumap_helpers *skel;
 	struct bpf_prog_info info = {};
@@ -54,6 +55,67 @@ void serial_test_xdp_cpumap_attach(void)
 	err = bpf_map_update_elem(map_fd, &idx, &val, 0);
 	ASSERT_NEQ(err, 0, "Add non-BPF_XDP_CPUMAP program to cpumap entry");
 
+	/* Try to attach BPF_XDP program with frags to cpumap when we have
+	 * already loaded a BPF_XDP program on the map
+	 */
+	idx = 1;
+	val.qsize = 192;
+	val.bpf_prog.fd = bpf_program__fd(skel->progs.xdp_dummy_cm_multi_frags);
+	err = bpf_map_update_elem(map_fd, &idx, &val, 0);
+	ASSERT_NEQ(err, 0, "Add BPF_XDP program with frags to cpumap entry");
+
 out_close:
 	test_xdp_with_cpumap_helpers__destroy(skel);
 }
+
+void test_xdp_with_cpumap_multi_frags_helpers(void)
+{
+	struct test_xdp_with_cpumap_multi_frags_helpers *skel;
+	struct bpf_prog_info info = {};
+	__u32 len = sizeof(info);
+	struct bpf_cpumap_val val = {
+		.qsize = 192,
+	};
+	int err, multi_frags_prog_fd, map_fd;
+	__u32 idx = 0;
+
+	skel = test_xdp_with_cpumap_multi_frags_helpers__open_and_load();
+	if (!ASSERT_OK_PTR(skel, "test_xdp_with_cpumap_helpers__open_and_load"))
+		return;
+
+	multi_frags_prog_fd = bpf_program__fd(skel->progs.xdp_dummy_cm_multi_frags);
+	map_fd = bpf_map__fd(skel->maps.cpu_map);
+	err = bpf_obj_get_info_by_fd(multi_frags_prog_fd, &info, &len);
+	if (!ASSERT_OK(err, "bpf_obj_get_info_by_fd"))
+		goto out_close;
+
+	val.bpf_prog.fd = multi_frags_prog_fd;
+	err = bpf_map_update_elem(map_fd, &idx, &val, 0);
+	ASSERT_OK(err, "Add program to cpumap entry");
+
+	err = bpf_map_lookup_elem(map_fd, &idx, &val);
+	ASSERT_OK(err, "Read cpumap entry");
+	ASSERT_EQ(info.id, val.bpf_prog.id,
+		  "Match program id to cpumap entry prog_id");
+
+	/* Try to attach BPF_XDP program to cpumap when we have
+	 * already loaded a BPF_XDP program with frags on the map
+	 */
+	idx = 1;
+	val.qsize = 192;
+	val.bpf_prog.fd = bpf_program__fd(skel->progs.xdp_dummy_cm);
+	err = bpf_map_update_elem(map_fd, &idx, &val, 0);
+	ASSERT_NEQ(err, 0, "Add BPF_XDP program to cpumap entry");
+
+out_close:
+	test_xdp_with_cpumap_multi_frags_helpers__destroy(skel);
+}
+
+void serial_test_xdp_cpumap_attach(void)
+{
+	if (test__start_subtest("CPUMAP with programs in entries"))
+		test_xdp_with_cpumap_helpers();
+
+	if (test__start_subtest("CPUMAP with multi-frags programs in entries"))
+		test_xdp_with_cpumap_multi_frags_helpers();
+}
tools/testing/selftests/bpf/prog_tests/xdp_devmap_attach.c +55 -0

79 lines not on this page · raw message

tools/testing/selftests/bpf/progs/test_xdp_with_cpumap_helpers.c +6 -0
index 532025057711..5b7c8371508f 100644
@@ -33,4 +33,10 @@ int xdp_dummy_cm(struct xdp_md *ctx)
 	return XDP_PASS;
 }
 
+SEC("xdp.frags/cpumap")
+int xdp_dummy_cm_multi_frags(struct xdp_md *ctx)
+{
+	return XDP_PASS;
+}
+
 char _license[] SEC("license") = "GPL";
tools/testing/selftests/bpf/progs/test_xdp_with_cpumap_multi_frags_helpers.c new file +27 -0
new file mode 100644
index 000000000000..e474408ff5c8
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/bpf.h>
+#include <bpf/bpf_helpers.h>
+
+#define IFINDEX_LO	1
+
+struct {
+	__uint(type, BPF_MAP_TYPE_CPUMAP);
+	__uint(key_size, sizeof(__u32));
+	__uint(value_size, sizeof(struct bpf_cpumap_val));
+	__uint(max_entries, 4);
+} cpu_map SEC(".maps");
+
+SEC("xdp_cpumap/dummy_cm")
+int xdp_dummy_cm(struct xdp_md *ctx)
+{
+	return XDP_PASS;
+}
+
+SEC("xdp.frags/cpumap")
+int xdp_dummy_cm_multi_frags(struct xdp_md *ctx)
+{
+	return XDP_PASS;
+}
+
+char _license[] SEC("license") = "GPL";
tools/testing/selftests/bpf/progs/test_xdp_with_devmap_helpers.c +7 -0
index 1e6b9c38ea6d..05c90e7ccd6c 100644
@@ -40,4 +40,11 @@ int xdp_dummy_dm(struct xdp_md *ctx)
 
 	return XDP_PASS;
 }
+
+SEC("xdp.frags/devmap")
+int xdp_dummy_dm_multi_frags(struct xdp_md *ctx)
+{
+	return XDP_PASS;
+}
+
 char _license[] SEC("license") = "GPL";
tools/testing/selftests/bpf/progs/test_xdp_with_devmap_multi_frags_helpers.c new file +27 -0
new file mode 100644
index 000000000000..cf2ae077003f
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/bpf.h>
+#include <bpf/bpf_helpers.h>
+
+struct {
+	__uint(type, BPF_MAP_TYPE_DEVMAP);
+	__uint(key_size, sizeof(__u32));
+	__uint(value_size, sizeof(struct bpf_devmap_val));
+	__uint(max_entries, 4);
+} dm_ports SEC(".maps");
+
+/* valid program on DEVMAP entry via SEC name;
+ * has access to egress and ingress ifindex
+ */
+SEC("xdp_devmap/map_prog")
+int xdp_dummy_dm(struct xdp_md *ctx)
+{
+	return XDP_PASS;
+}
+
+SEC("xdp.frags/devmap")
+int xdp_dummy_dm_multi_frags(struct xdp_md *ctx)
+{
+	return XDP_PASS;
+}
+
+char _license[] SEC("license") = "GPL";
Signature · 1 line
2.34.1
#35 lore raw

PATCH v22 23/23 xdp: disable XDP_REDIRECT for xdp multi-frags

In reply to Lorenzo Bianconi

XDP_REDIRECT is not fully supported yet for xdp multi-frags since not all XDP capable drivers can map non-linear xdp_frame in ndo_xdp_xmit so disable it for the moment.

---
 net/core/filter.c | 8 ++++++++
 1 file changed, 8 insertions(+)
net/core/filter.c +8 -0
index 06b4b946fa45..546df4152d6f 100644
@@ -4266,6 +4266,14 @@ int xdp_do_redirect(struct net_device *dev, struct xdp_buff *xdp,
 	struct bpf_redirect_info *ri = this_cpu_ptr(&bpf_redirect_info);
 	enum bpf_map_type map_type = ri->map_type;
 
+	/* XDP_REDIRECT is not fully supported yet for xdp multi-frags since
+	 * not all XDP capable drivers can map non-linear xdp_frame in
+	 * ndo_xdp_xmit.
+	 */
+	if (unlikely(xdp_buff_has_frags(xdp) &&
+		     map_type != BPF_MAP_TYPE_CPUMAP))
+		return -EOPNOTSUPP;
+
 	if (map_type == BPF_MAP_TYPE_XSKMAP)
 		return __xdp_do_redirect_xsk(ri, dev, xdp, xdp_prog);
 
Signature · 1 line
2.34.1