introduce xdp frags support to veth driver
Subsystems (4)
v2 cover introduce xdp frags support to veth driver
Introduce xdp frags support to veth driver in order to allow increasing the mtu over the page boundary if the attached xdp program declares to support xdp fragments. Enable NETIF_F_ALL_TSO when the device is running in xdp mode. This series has been tested running xdp_router_ipv4 sample available in the kernel tree redirecting tcp traffic from veth pair into the mvneta driver.
Changes since v1:
- always consider skb paged are non-writable
- fix tpt issue with sctp
- always use napi if we are running in xdp mode in veth_xmit
Lorenzo Bianconi (3):
net: veth: account total xdp_frame len running ndo_xdp_xmit
veth: rework veth_xdp_rcv_skb in order to accept non-linear skb
veth: allow jumbo frames in xdp mode
drivers/net/veth.c | 204 +++++++++++++++++++++++++++++---------------- include/net/xdp.h | 14 ++++ net/core/xdp.c | 1 + 3 files changed, 146 insertions(+), 73 deletions(-)
Signature · 1 line
2.35.1
PATCH v2 1/3 net: veth: account total xdp_frame len running ndo_xdp_xmit
Even if this is a theoretical issue since it is not possible to perform XDP_REDIRECT on a non-linear xdp_frame, veth driver does not account paged area in ndo_xdp_xmit function pointer.
Introduce xdp_get_frame_len utility routine to get the xdp_frame full length and account total frame size running XDP_REDIRECT of a non-linear xdp frame into a veth device.
--- drivers/net/veth.c | 4 ++-- include/net/xdp.h | 14 ++++++++++++++ 2 files changed, 16 insertions(+), 2 deletions(-)
drivers/net/veth.c +2 -2
@@ -493,7 +493,7 @@ static int veth_xdp_xmit(struct net_device *dev, int n,struct xdp_frame *frame = frames[i];void *ptr =veth_xdp_to_ptr (frame); -if (unlikely (frame->len > max_len || +if (unlikely (xdp_get_frame_len (frame) > max_len ||__ptr_ring_produce (&rq->xdp_ring, ptr)))break ; nxmit++;
@@ -854,7 +854,7 @@ static int veth_xdp_rcv(struct veth_rq *rq, int budget,/* ndo_xdp_xmit */ struct xdp_frame *frame =veth_ptr_to_xdp (ptr); - stats->xdp_bytes += frame->len; + stats->xdp_bytes +=xdp_get_frame_len (frame); frame =veth_xdp_rcv_one (rq, frame, bq, stats);if (frame) {/* XDP_PASS */
include/net/xdp.h +14 -0
@@ -343,6 +343,20 @@ static inline void xdp_release_frame(struct xdp_frame *xdpf)__xdp_release_frame (xdpf->data, mem); } +static __always_inline unsigned int xdp_get_frame_len(struct xdp_frame *xdpf) +{ +struct skb_shared_info *sinfo; +unsigned int len = xdpf->len; + +if (likely (!xdp_frame_has_frags (xdpf))) + goto out; + + sinfo =xdp_get_shared_info_from_frame (xdpf); + len += sinfo->xdp_frags_size; +out: +return len; +} +int __xdp_rxq_info_reg (struct xdp_rxq_info *xdp_rxq,struct net_device *dev,u32 queue_index,unsigned int napi_id,u32 frag_size);
Signature · 1 line
2.35.1
PATCH v2 2/3 veth: rework veth_xdp_rcv_skb in order to accept non-linear skb
In reply to Lorenzo BianconiIntroduce veth_convert_xdp_buff_from_skb routine in order to convert a non-linear skb into a xdp buffer. If the received skb is cloned or shared, veth_convert_xdp_buff_from_skb will copy it in a new skb composed by order-0 pages for the linear and the fragmented area. Moreover veth_convert_xdp_buff_from_skb guarantees we have enough headroom for xdp.
This is a preliminary patch to allow attaching xdp programs with frags support on veth devices.
--- drivers/net/veth.c | 174 ++++++++++++++++++++++++++++++--------------- net/core/xdp.c | 1 + 2 files changed, 119 insertions(+), 56 deletions(-)
drivers/net/veth.c +118 -56
@@ -432,21 +432,6 @@ static void veth_set_multicast_list(struct net_device *dev) { } -static struct sk_buff *veth_build_skb (void *head,int headroom,int len, -int buflen) -{ -struct sk_buff *skb; - - skb =build_skb (head, buflen); -if (!skb) -return NULL ; - -skb_reserve (skb, headroom); -skb_put (skb, len); - -return skb; -} -static int veth_select_rxq (struct net_device *dev) {return smp_processor_id () % dev->real_num_rx_queues;
@@ -694,72 +679,143 @@ static void veth_xdp_rcv_bulk_skb(struct veth_rq *rq, void **frames, } } -static struct sk_buff *veth_xdp_rcv_skb (struct veth_rq *rq, -struct sk_buff *skb, -struct veth_xdp_tx_bq *bq, -struct veth_stats *stats) +static void veth_xdp_get (struct xdp_buff *xdp) { -u32 pktlen, headroom, act, metalen, frame_sz; -void *orig_data, *orig_data_end; -struct bpf_prog *xdp_prog; -int mac_len, delta, off; -struct xdp_buff xdp; +struct skb_shared_info *sinfo =xdp_get_shared_info_from_buff (xdp); +int i; -skb_prepare_for_gro (skb); +get_page (virt_to_page (xdp->data)); +if (likely (!xdp_buff_has_frags (xdp))) +return ; -rcu_read_lock (); - xdp_prog =rcu_dereference (rq->xdp_prog); -if (unlikely (!xdp_prog)) { -rcu_read_unlock (); - goto out; - } +for (i =0 ; i < sinfo->nr_frags; i++) +__skb_frag_ref (&sinfo->frags[i]); +} - mac_len = skb->data -skb_mac_header (skb); - pktlen = skb->len + mac_len; - headroom =skb_headroom (skb) - mac_len; +static int veth_convert_xdp_buff_from_skb (struct veth_rq *rq, +struct xdp_buff *xdp, +struct sk_buff **pskb) +{ +struct sk_buff *skb = *pskb; +u32 frame_sz;if (skb_shared (skb) ||skb_head_is_locked (skb) || -skb_is_nonlinear (skb) || headroom <XDP_PACKET_HEADROOM ) { +skb_shinfo (skb)->nr_frags) { +u32 size, len, max_head_size, off;struct sk_buff *nskb; -int size, head_off; -void *head, *start;struct page *page; +int i, head_off; - size =SKB_DATA_ALIGN (VETH_XDP_HEADROOM + pktlen) + -SKB_DATA_ALIGN (sizeof (struct skb_shared_info )); -if (size >PAGE_SIZE ) +/* We need a private copy of the skb and data buffers since +* the ebpf program can modify it. We segment the original skb +* into order-0 pages without linearize it. +* +* Make sure we have enough space for linear and paged area +*/ + max_head_size =SKB_WITH_OVERHEAD (PAGE_SIZE - +VETH_XDP_HEADROOM ); +if (skb->len >PAGE_SIZE *MAX_SKB_FRAGS + max_head_size) goto drop; +/* Allocate skb head */ page =alloc_page (GFP_ATOMIC | __GFP_NOWARN);if (!page) goto drop; - head =page_address (page); - start = head +VETH_XDP_HEADROOM ; -if (skb_copy_bits (skb, -mac_len, start, pktlen)) { -page_frag_free (head); + nskb =build_skb (page_address (page),PAGE_SIZE ); +if (!nskb) { +put_page (page); goto drop; } - nskb =veth_build_skb (head,VETH_XDP_HEADROOM + mac_len, - skb->len,PAGE_SIZE ); -if (!nskb) { -page_frag_free (head); +skb_reserve (nskb,VETH_XDP_HEADROOM ); + size =min_t (u32, skb->len, max_head_size); +if (skb_copy_bits (skb,0 , nskb->data, size)) { +consume_skb (nskb); goto drop; } +skb_put (nskb, size);skb_copy_header (nskb, skb); head_off =skb_headroom (nskb) -skb_headroom (skb);skb_headers_offset_update (nskb, head_off); + +/* Allocate paged area of new skb */ + off = size; + len = skb->len - off; + +for (i =0 ; i <MAX_SKB_FRAGS && off < skb->len; i++) { + page =alloc_page (GFP_ATOMIC | __GFP_NOWARN); +if (!page) { +consume_skb (nskb); + goto drop; + } + + size =min_t (u32, len,PAGE_SIZE ); +skb_add_rx_frag (nskb, i, page,0 , size,PAGE_SIZE ); +if (skb_copy_bits (skb, off,page_address (page), + size)) { +consume_skb (nskb); + goto drop; + } + + len -= size; + off += size; + } +consume_skb (skb); skb = nskb; + }else if (skb_headroom (skb) <XDP_PACKET_HEADROOM && +pskb_expand_head (skb,VETH_XDP_HEADROOM ,0 ,GFP_ATOMIC )) { + goto drop; }/* SKB "head" area always have tailroom for skb_shared_info */ frame_sz =skb_end_pointer (skb) - skb->head; frame_sz +=SKB_DATA_ALIGN (sizeof (struct skb_shared_info )); -xdp_init_buff (&xdp, frame_sz, &rq->xdp_rxq); -xdp_prepare_buff (&xdp, skb->head, skb->mac_header, pktlen, true); +xdp_init_buff (xdp, frame_sz, &rq->xdp_rxq); +xdp_prepare_buff (xdp, skb->head,skb_headroom (skb), +skb_headlen (skb), true); + +if (skb_is_nonlinear (skb)) { +skb_shinfo (skb)->xdp_frags_size = skb->data_len; +xdp_buff_set_frags_flag (xdp); + }else { +xdp_buff_clear_frags_flag (xdp); + } + *pskb = skb; + +return 0 ; +drop: +consume_skb (skb); + *pskb =NULL ; + +return -ENOMEM ; +} + +static struct sk_buff *veth_xdp_rcv_skb (struct veth_rq *rq, +struct sk_buff *skb, +struct veth_xdp_tx_bq *bq, +struct veth_stats *stats) +{ +void *orig_data, *orig_data_end; +struct bpf_prog *xdp_prog; +struct xdp_buff xdp; +u32 act, metalen; +int off; + +skb_prepare_for_gro (skb); + +rcu_read_lock (); + xdp_prog =rcu_dereference (rq->xdp_prog); +if (unlikely (!xdp_prog)) { +rcu_read_unlock (); + goto out; + } + +__skb_push (skb, skb->data -skb_mac_header (skb)); +if (veth_convert_xdp_buff_from_skb (rq, &xdp, &skb)) + goto drop; orig_data = xdp.data; orig_data_end = xdp.data_end;
@@ -770,7 +826,7 @@ static struct sk_buff *veth_xdp_rcv_skb(struct veth_rq *rq,case XDP_PASS :break ;case XDP_TX : -get_page (virt_to_page (xdp.data)); +veth_xdp_get (&xdp);consume_skb (skb); xdp.rxq->mem = rq->xdp_mem;if (unlikely (veth_xdp_tx (rq, &xdp, bq) <0 )) {
@@ -782,7 +838,7 @@ static struct sk_buff *veth_xdp_rcv_skb(struct veth_rq *rq,rcu_read_unlock (); goto xdp_xmit;case XDP_REDIRECT : -get_page (virt_to_page (xdp.data)); +veth_xdp_get (&xdp);consume_skb (skb); xdp.rxq->mem = rq->xdp_mem;if (xdp_do_redirect (rq->dev, &xdp, xdp_prog)) {
@@ -805,18 +861,24 @@ static struct sk_buff *veth_xdp_rcv_skb(struct veth_rq *rq,rcu_read_unlock ();/* check if bpf_xdp_adjust_head was used */ - delta = orig_data - xdp.data; - off = mac_len + delta; + off = orig_data - xdp.data;if (off >0 )__skb_push (skb, off);else if (off <0 )__skb_pull (skb, -off); - skb->mac_header -= delta; + +skb_reset_mac_header (skb);/* check if bpf_xdp_adjust_tail was used */ off = xdp.data_end - orig_data_end;if (off !=0 )__skb_put (skb, off);/* positive on grow, negative on shrink */ + +if (xdp_buff_has_frags (&xdp)) + skb->data_len =skb_shinfo (skb)->xdp_frags_size; +else + skb->data_len =0 ; + skb->protocol =eth_type_trans (skb, rq->dev); metalen = xdp.data - xdp.data_meta;
@@ -832,7 +894,7 @@ static struct sk_buff *veth_xdp_rcv_skb(struct veth_rq *rq,return NULL ; err_xdp:rcu_read_unlock (); -page_frag_free (xdp.data); +xdp_return_buff (&xdp); xdp_xmit:return NULL ; }
net/core/xdp.c +1 -0
@@ -528,6 +528,7 @@ void xdp_return_buff(struct xdp_buff *xdp) out:__xdp_return (xdp->data, &xdp->rxq->mem, true, xdp); } +EXPORT_SYMBOL_GPL (xdp_return_buff);/* Only called for MEM_TYPE_PAGE_POOL see xdp.h */ void __xdp_release_frame (void *data,struct xdp_mem_info *mem)
Signature · 1 line
2.35.1
PATCH v2 3/3 veth: allow jumbo frames in xdp mode
In reply to Lorenzo BianconiAllow increasing the MTU over page boundaries on veth devices if the attached xdp program declares to support xdp fragments. Enable NETIF_F_ALL_TSO when the device is running in xdp mode.
--- drivers/net/veth.c | 26 +++++++++++--------------- 1 file changed, 11 insertions(+), 15 deletions(-)
drivers/net/veth.c +11 -15
@@ -292,8 +292,6 @@ static int veth_forward_skb(struct net_device *dev, struct sk_buff *skb,/* return true if the specified skb has chances of GRO aggregation * Don't strive for accuracy, but try to avoid GRO overhead in the most * common scenarios. -* When XDP is enabled, all traffic is considered eligible, as the xmit -* device has TSO off. * When TSO is enabled on the xmit device, we are likely interested only * in UDP aggregation, explicitly check for that if the skb is suspected * - the sock_wfree destructor is used by UDP, ICMP and XDP sockets -
@@ -334,7 +332,8 @@ static netdev_tx_t veth_xmit(struct sk_buff *skb, struct net_device *dev)* Don't bother with napi/GRO if the skb can't be aggregated */ use_napi =rcu_access_pointer (rq->napi) && -veth_skb_is_eligible_for_gro (dev, rcv, skb); + (rcu_access_pointer (rq->xdp_prog) || +veth_skb_is_eligible_for_gro (dev, rcv, skb)); }skb_tx_timestamp (skb);
@@ -1508,7 +1507,6 @@ static int veth_xdp_set(struct net_device *dev, struct bpf_prog *prog,struct veth_priv *priv =netdev_priv (dev);struct bpf_prog *old_prog;struct net_device *peer; -unsigned int max_mtu;int err; old_prog = priv->_xdp_prog;
@@ -1516,6 +1514,8 @@ static int veth_xdp_set(struct net_device *dev, struct bpf_prog *prog, peer =rtnl_dereference (priv->peer);if (prog) { +unsigned int max_mtu; +if (!peer) {NL_SET_ERR_MSG_MOD (extack,"Cannot set XDP when peer is detached" ); err = -ENOTCONN ;
@@ -1525,9 +1525,9 @@ static int veth_xdp_set(struct net_device *dev, struct bpf_prog *prog, max_mtu =PAGE_SIZE -VETH_XDP_HEADROOM - peer->hard_header_len -SKB_DATA_ALIGN (sizeof (struct skb_shared_info )); -if (peer->mtu > max_mtu) { -NL_SET_ERR_MSG_MOD (extack,"Peer MTU is too large to set XDP" ); - err = -ERANGE ; +if (!prog->aux->xdp_has_frags && peer->mtu > max_mtu) { +NL_SET_ERR_MSG_MOD (extack,"prog does not support XDP frags" ); + err = -EOPNOTSUPP ; goto err; }
@@ -1545,10 +1545,8 @@ static int veth_xdp_set(struct net_device *dev, struct bpf_prog *prog, } } -if (!old_prog) { - peer->hw_features &= ~NETIF_F_GSO_SOFTWARE ; - peer->max_mtu = max_mtu; - } +if (!old_prog) + peer->hw_features &= ~NETIF_F_GSO_FRAGLIST ; }if (old_prog) {
@@ -1556,10 +1554,8 @@ static int veth_xdp_set(struct net_device *dev, struct bpf_prog *prog,if (dev->flags &IFF_UP )veth_disable_xdp (dev); -if (peer) { - peer->hw_features |=NETIF_F_GSO_SOFTWARE ; - peer->max_mtu =ETH_MAX_MTU ; - } +if (peer) + peer->hw_features |=NETIF_F_GSO_FRAGLIST ; }bpf_prog_put (old_prog); }
Signature · 1 line
2.35.1
Paolo Abeni
maintainerRe: [PATCH v2 bpf-next 3/3] veth: allow jumbo frames in xdp mode
Quoted 23 lines · Lorenzo Bianconi
Allow increasing the MTU over page boundaries on veth devices if the attached xdp program declares to support xdp fragments. Enable
NETIF_F_ALL_TSOwhen the device is running in xdp mode.Signed-off-by Lorenzo Bianconi <[email protected]>--- drivers/net/veth.c | 26 +++++++++++--------------- 1 file changed, 11 insertions(+), 15 deletions(-)drivers/net/veth.c +0
-2@@ -292,8 +292,6 @@ static int veth_forward_skb(struct net_device *dev, struct sk_buff *skb,/* return true if the specified skb has chances of GRO aggregation * Don't strive for accuracy, but try to avoid GRO overhead in the most * common scenarios. -* When XDP is enabled, all traffic is considered eligible, as the xmit -* device has TSO off. * When TSO is enabled on the xmit device, we are likely interested only * in UDP aggregation, explicitly check for that if the skb is suspected * - the sock_wfree destructor is used by UDP, ICMP and XDP sockets -
drivers/net/veth.c static netdev_tx_t veth_xmit(struct sk_buff *skb, struct net_device *dev) · line 336
Quoted 6 lines
drivers/net/veth.c +2
-1@@ -334,7 +332,8 @@ static netdev_tx_t veth_xmit(struct sk_buff *skb, struct net_device *dev)* Don't bother with napi/GRO if the skb can't be aggregated */ use_napi =rcu_access_pointer (rq->napi) && -veth_skb_is_eligible_for_gro (dev, rcv, skb); + (rcu_access_pointer (rq->xdp_prog) || +veth_skb_is_eligible_for_gro (dev, rcv, skb));
Sorry for the late feedback. I think the code would be more readable if you move the additional check inside 'veth_skb_is_eligible_for_gro' and adjust veth_skb_is_eligible_for_gro() comment accordingly.
Thanks!
Paolo
Re: [PATCH v2 bpf-next 3/3] veth: allow jumbo frames in xdp mode
Quoted 26 lines · Lorenzo Bianconi
Quoted 25 lines
Allow increasing the MTU over page boundaries on veth devices if the attached xdp program declares to support xdp fragments. Enable
NETIF_F_ALL_TSOwhen the device is running in xdp mode.Signed-off-by Lorenzo Bianconi <[email protected]>--- drivers/net/veth.c | 26 +++++++++++--------------- 1 file changed, 11 insertions(+), 15 deletions(-)drivers/net/veth.c +0
-2@@ -292,8 +292,6 @@ static int veth_forward_skb(struct net_device *dev, struct sk_buff *skb,/* return true if the specified skb has chances of GRO aggregation * Don't strive for accuracy, but try to avoid GRO overhead in the most * common scenarios. -* When XDP is enabled, all traffic is considered eligible, as the xmit -* device has TSO off. * When TSO is enabled on the xmit device, we are likely interested only * in UDP aggregation, explicitly check for that if the skb is suspected * - the sock_wfree destructor is used by UDP, ICMP and XDP sockets - @@ -334,7 +332,8 @@ static netdev_tx_t veth_xmit(struct sk_buff *skb, struct net_device *dev)* Don't bother with napi/GRO if the skb can't be aggregated */
Quoted 8 lines
drivers/net/veth.c static netdev_tx_t veth_xmit(struct sk_buff *skb, struct net_device *dev) · line 336
Quoted 4 lines
drivers/net/veth.c +2
-1use_napi =rcu_access_pointer (rq->napi) && -veth_skb_is_eligible_for_gro (dev, rcv, skb); + (rcu_access_pointer (rq->xdp_prog) || +veth_skb_is_eligible_for_gro (dev, rcv, skb));Sorry for the late feedback. I think the code would be more readable if you move the additional check inside '
veth_skb_is_eligible_for_gro' and adjustveth_skb_is_eligible_for_gro()comment accordingly.
Hi Paolo,
sure, will do in v3.
Regards,
Lorenzo
Quoted 5 lines
Thanks!
Paolo