Mellanox: lc_ini_bundle updates
cover Mellanox: lc_ini_bundle updates
In patch #1, repackage the existing lc_ini_bundle sans xz compression.
In patch #2, contribute an additional lc_ini_bundle for the minimum required FW version, XX.2010.1006.
Petr Machata (2):
Mellanox: xx.2010.1502: Distribute non-xz-compressed lc_ini_bundle
Mellanox: Add lc_ini_bundle for xx.2010.1006
WHENCE | 3 ++- mellanox/lc_ini_bundle_2010_1006.bin | Bin 0 -> 12300 bytes mellanox/lc_ini_bundle_2010_1502.bin | Bin 0 -> 12300 bytes mellanox/lc_ini_bundle_2010_1502.bin.xz | Bin 632 -> 0 bytes 4 files changed, 2 insertions(+), 1 deletion(-) create mode 100644 mellanox/lc_ini_bundle_2010_1006.bin create mode 100644 mellanox/lc_ini_bundle_2010_1502.bin delete mode 100644 mellanox/lc_ini_bundle_2010_1502.bin.xz
Signature · 1 line
2.31.1
PATCH 1/2 Mellanox: xx.2010.1502: Distribute non-xz-compressed lc_ini_bundle
In the previous patch, lc_ini_bundle_2010_1502.bin.xz was contributed. Pushing an xz-encoded file was a mistake, the format required by the driver is decompressed, and whether the firmware file is stored on-disk compressed or plain is a user policy decision.
Therefore drop the xz file, and add the decompressed equivalent instead.
--- WHENCE | 2 +- mellanox/lc_ini_bundle_2010_1502.bin | Bin 0 -> 12300 bytes mellanox/lc_ini_bundle_2010_1502.bin.xz | Bin 632 -> 0 bytes 3 files changed, 1 insertion(+), 1 deletion(-) create mode 100644 mellanox/lc_ini_bundle_2010_1502.bin delete mode 100644 mellanox/lc_ini_bundle_2010_1502.bin.xz
WHENCE +1 -1
@@ -5892,7 +5892,7 @@ File: mellanox/mlxsw_spectrum3-30.2010.1406.mfa2 File: mellanox/mlxsw_spectrum-13.2010.1502.mfa2 File: mellanox/mlxsw_spectrum2-29.2010.1502.mfa2 File: mellanox/mlxsw_spectrum3-30.2010.1502.mfa2 -File: mellanox/lc_ini_bundle_2010_1502.bin.xz +File: mellanox/lc_ini_bundle_2010_1502.bin Licence: Copyright (c) 2017-2020 Mellanox Technologies, Ltd. All rights reserved.
mellanox/lc_ini_bundle_2010_1502.bin new file binary +0 -0
mellanox/lc_ini_bundle_2010_1502.bin.xz deleted binary +0 -0
Signature · 1 line
2.31.1
PATCH 2/2 Mellanox: Add lc_ini_bundle for xx.2010.1006
In reply to Petr MachataAs of this writing, the FW version xx.2010.1006 is the lowest version with which mlxsw will operate. It is therefore useful to distribute the lc_ini_bundle for modular systems for this version as well. Add the file.
--- WHENCE | 1 + mellanox/lc_ini_bundle_2010_1006.bin | Bin 0 -> 12300 bytes 2 files changed, 1 insertion(+) create mode 100644 mellanox/lc_ini_bundle_2010_1006.bin
WHENCE +1 -0
@@ -5883,6 +5883,7 @@ File: mellanox/mlxsw_spectrum3-30.2008.3326.mfa2 File: mellanox/mlxsw_spectrum-13.2010.1006.mfa2 File: mellanox/mlxsw_spectrum2-29.2010.1006.mfa2 File: mellanox/mlxsw_spectrum3-30.2010.1006.mfa2 +File: mellanox/lc_ini_bundle_2010_1006.bin File: mellanox/mlxsw_spectrum-13.2010.1232.mfa2 File: mellanox/mlxsw_spectrum2-29.2010.1232.mfa2 File: mellanox/mlxsw_spectrum3-30.2010.1232.mfa2
mellanox/lc_ini_bundle_2010_1006.bin new file binary +0 -0
Signature · 1 line
2.31.1
Quoted 9 lines · Petr Machata
In patch #1, repackage the existing
lc_ini_bundlesans xz compression.In patch #2, contribute an additional
lc_ini_bundlefor the minimum required FW version, XX.2010.1006.Petr Machata (2):
Mellanox: xx.2010.1502: Distribute non-xz-compressedlc_ini_bundle
Mellanox: Addlc_ini_bundlefor xx.2010.1006
Both applied and pushed out.
josh
Quoted 13 lines
WHENCE | 3 ++- mellanox/lc_ini_bundle_2010_1006.bin | Bin 0 -> 12300 bytes mellanox/lc_ini_bundle_2010_1502.bin | Bin 0 -> 12300 bytes mellanox/lc_ini_bundle_2010_1502.bin.xz | Bin 632 -> 0 bytes 4 files changed, 2 insertions(+), 1 deletion(-) create mode 100644 mellanox/lc_ini_bundle_2010_1006.bin create mode 100644 mellanox/lc_ini_bundle_2010_1502.bin delete mode 100644 mellanox/lc_ini_bundle_2010_1502.bin.xz--
2.31.1