Skip to contentSkip to conversation

OPP: Make ceil/floor/exact helpers share code

PATCH New Viresh Kumar 1 participant 5 messages Jul 5, 2022

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

v2 cover OPP: Make ceil/floor/exact helpers share code

Hello,

All helpers of type ceil/floor/exact do pretty much the same thing. Rewrite them in order to reduce code redundancy.

Tested the freq based routines on Hikey platform, works as expected.

This is rebased over other recent OPP changes and is pushed here:

git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm.git opp/linux-next

V1->V2:
- Don't cast unsigned int * to unsigned long *.
- Rearrange into 4 patches instead of 5.
- Move back to 80 column width.
- New tags.

--
Viresh

Viresh Kumar (4):
OPP: Remove dev_pm_opp_find_freq_ceil_by_volt()
OPP: Add generic key finding helpers and use them for freq APIs
OPP: Use generic key finding helpers for level key
OPP: Use generic key finding helpers for bandwidth key

 drivers/opp/core.c     | 429 +++++++++++++++--------------------------
 include/linux/pm_opp.h |   8 -
 2 files changed, 155 insertions(+), 282 deletions(-)
Signature · 1 line
2.31.1.272.g89b43f80a514
#1 lore raw

PATCH v2 1/4 OPP: Remove dev_pm_opp_find_freq_ceil_by_volt()

This was added few years back, but the code that was supposed to use it never got merged. Remove the unused helper.

---
 drivers/opp/core.c     | 54 ------------------------------------------
 include/linux/pm_opp.h |  8 -------
 2 files changed, 62 deletions(-)
drivers/opp/core.c +0 -54
index e74bdc134c5a..fc0232f695c6 100644
@@ -607,60 +607,6 @@ struct dev_pm_opp *dev_pm_opp_find_freq_floor(struct device *dev,
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_find_freq_floor);
 
-/**
- * dev_pm_opp_find_freq_ceil_by_volt() - Find OPP with highest frequency for
- *					 target voltage.
- * @dev:	Device for which we do this operation.
- * @u_volt:	Target voltage.
- *
- * Search for OPP with highest (ceil) frequency and has voltage <= u_volt.
- *
- * Return: matching *opp, else returns ERR_PTR in case of error which should be
- * handled using IS_ERR.
- *
- * Error return values can be:
- * EINVAL:	bad parameters
- *
- * The callers are required to call dev_pm_opp_put() for the returned OPP after
- * use.
- */
-struct dev_pm_opp *dev_pm_opp_find_freq_ceil_by_volt(struct device *dev,
-						     unsigned long u_volt)
-{
-	struct opp_table *opp_table;
-	struct dev_pm_opp *temp_opp, *opp = ERR_PTR(-ERANGE);
-
-	if (!dev || !u_volt) {
-		dev_err(dev, "%s: Invalid argument volt=%lu\n", __func__,
-			u_volt);
-		return ERR_PTR(-EINVAL);
-	}
-
-	opp_table = _find_opp_table(dev);
-	if (IS_ERR(opp_table))
-		return ERR_CAST(opp_table);
-
-	mutex_lock(&opp_table->lock);
-
-	list_for_each_entry(temp_opp, &opp_table->opp_list, node) {
-		if (temp_opp->available) {
-			if (temp_opp->supplies[0].u_volt > u_volt)
-				break;
-			opp = temp_opp;
-		}
-	}
-
-	/* Increment the reference count of OPP */
-	if (!IS_ERR(opp))
-		dev_pm_opp_get(opp);
-
-	mutex_unlock(&opp_table->lock);
-	dev_pm_opp_put_opp_table(opp_table);
-
-	return opp;
-}
-EXPORT_SYMBOL_GPL(dev_pm_opp_find_freq_ceil_by_volt);
-
 /**
  * dev_pm_opp_find_level_exact() - search for an exact level
  * @dev:		device for which we do this operation
include/linux/pm_opp.h +0 -8
index 9d59aedc2be3..50cbc75bef71 100644
@@ -118,8 +118,6 @@ struct dev_pm_opp *dev_pm_opp_find_freq_exact(struct device *dev,
 					      bool available);
 struct dev_pm_opp *dev_pm_opp_find_freq_floor(struct device *dev,
 					      unsigned long *freq);
-struct dev_pm_opp *dev_pm_opp_find_freq_ceil_by_volt(struct device *dev,
-						     unsigned long u_volt);
 
 struct dev_pm_opp *dev_pm_opp_find_level_exact(struct device *dev,
 					       unsigned int level);
@@ -265,12 +263,6 @@ static inline struct dev_pm_opp *dev_pm_opp_find_freq_floor(struct device *dev,
 	return ERR_PTR(-EOPNOTSUPP);
 }
 
-static inline struct dev_pm_opp *dev_pm_opp_find_freq_ceil_by_volt(struct device *dev,
-					unsigned long u_volt)
-{
-	return ERR_PTR(-EOPNOTSUPP);
-}
-
 static inline struct dev_pm_opp *dev_pm_opp_find_freq_ceil(struct device *dev,
 					unsigned long *freq)
 {
Signature · 1 line
2.31.1.272.g89b43f80a514
#2 lore raw

PATCH v2 2/4 OPP: Add generic key finding helpers and use them for freq APIs

In reply to Viresh Kumar

There are three type of helpers, to find exact, ceil, and floor values, replicated for multiple key types, freq, level, bw. And all of these helpers share a lot of boilerplate code.

Add generic key finding helpers to reduce code redundancy.

Also update the freq finder helpers to use the new infrastructure.

---
 drivers/opp/core.c | 229 +++++++++++++++++++++++++--------------------
 1 file changed, 130 insertions(+), 99 deletions(-)
drivers/opp/core.c +130 -99
index fc0232f695c6..c850b8691ee6 100644
@@ -427,6 +427,131 @@ int dev_pm_opp_get_opp_count(struct device *dev)
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_get_opp_count);
 
+/* Helpers to read keys */
+static unsigned long _read_freq(struct dev_pm_opp *opp, int index)
+{
+	return opp->rate;
+}
+
+/* Generic comparison helpers */
+static bool _compare_exact(struct dev_pm_opp **opp, struct dev_pm_opp *temp_opp,
+			   unsigned long opp_key, unsigned long key)
+{
+	if (opp_key == key) {
+		*opp = temp_opp;
+		return true;
+	}
+
+	return false;
+}
+
+static bool _compare_ceil(struct dev_pm_opp **opp, struct dev_pm_opp *temp_opp,
+			  unsigned long opp_key, unsigned long key)
+{
+	if (opp_key >= key) {
+		*opp = temp_opp;
+		return true;
+	}
+
+	return false;
+}
+
+static bool _compare_floor(struct dev_pm_opp **opp, struct dev_pm_opp *temp_opp,
+			   unsigned long opp_key, unsigned long key)
+{
+	if (opp_key > key)
+		return true;
+
+	*opp = temp_opp;
+	return false;
+}
+
+/* Generic key finding helpers */
+static struct dev_pm_opp *_opp_table_find_key(struct opp_table *opp_table,
+		unsigned long *key, int index, bool available,
+		unsigned long (*read)(struct dev_pm_opp *opp, int index),
+		bool (*compare)(struct dev_pm_opp **opp, struct dev_pm_opp *temp_opp,
+				unsigned long opp_key, unsigned long key))
+{
+	struct dev_pm_opp *temp_opp, *opp = ERR_PTR(-ERANGE);
+
+	mutex_lock(&opp_table->lock);
+
+	list_for_each_entry(temp_opp, &opp_table->opp_list, node) {
+		if (temp_opp->available == available) {
+			if (compare(&opp, temp_opp, read(temp_opp, index), *key))
+				break;
+		}
+	}
+
+	/* Increment the reference count of OPP */
+	if (!IS_ERR(opp)) {
+		*key = read(opp, index);
+		dev_pm_opp_get(opp);
+	}
+
+	mutex_unlock(&opp_table->lock);
+
+	return opp;
+}
+
+static struct dev_pm_opp *
+_find_key(struct device *dev, unsigned long *key, int index, bool available,
+	  unsigned long (*read)(struct dev_pm_opp *opp, int index),
+	  bool (*compare)(struct dev_pm_opp **opp, struct dev_pm_opp *temp_opp,
+			  unsigned long opp_key, unsigned long key))
+{
+	struct opp_table *opp_table;
+	struct dev_pm_opp *opp;
+
+	opp_table = _find_opp_table(dev);
+	if (IS_ERR(opp_table)) {
+		dev_err(dev, "%s: OPP table not found (%ld)\n", __func__,
+			PTR_ERR(opp_table));
+		return ERR_CAST(opp_table);
+	}
+
+	opp = _opp_table_find_key(opp_table, key, index, available, read,
+				  compare);
+
+	dev_pm_opp_put_opp_table(opp_table);
+
+	return opp;
+}
+
+static struct dev_pm_opp *_find_key_exact(struct device *dev,
+		unsigned long key, int index, bool available,
+		unsigned long (*read)(struct dev_pm_opp *opp, int index))
+{
+	/*
+	 * The value of key will be updated here, but will be ignored as the
+	 * caller doesn't need it.
+	 */
+	return _find_key(dev, &key, index, available, read, _compare_exact);
+}
+
+static struct dev_pm_opp *_opp_table_find_key_ceil(struct opp_table *opp_table,
+		unsigned long *key, int index, bool available,
+		unsigned long (*read)(struct dev_pm_opp *opp, int index))
+{
+	return _opp_table_find_key(opp_table, key, index, available, read,
+				   _compare_ceil);
+}
+
+static struct dev_pm_opp *_find_key_ceil(struct device *dev, unsigned long *key,
+		int index, bool available,
+		unsigned long (*read)(struct dev_pm_opp *opp, int index))
+{
+	return _find_key(dev, key, index, available, read, _compare_ceil);
+}
+
+static struct dev_pm_opp *_find_key_floor(struct device *dev,
+		unsigned long *key, int index, bool available,
+		unsigned long (*read)(struct dev_pm_opp *opp, int index))
+{
+	return _find_key(dev, key, index, available, read, _compare_floor);
+}
+
 /**
  * dev_pm_opp_find_freq_exact() - search for an exact frequency
  * @dev:		device for which we do this operation
@@ -451,61 +576,16 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_get_opp_count);
  * use.
  */
 struct dev_pm_opp *dev_pm_opp_find_freq_exact(struct device *dev,
-					      unsigned long freq,
-					      bool available)
+		unsigned long freq, bool available)
 {
-	struct opp_table *opp_table;
-	struct dev_pm_opp *temp_opp, *opp = ERR_PTR(-ERANGE);
-
-	opp_table = _find_opp_table(dev);
-	if (IS_ERR(opp_table)) {
-		int r = PTR_ERR(opp_table);
-
-		dev_err(dev, "%s: OPP table not found (%d)\n", __func__, r);
-		return ERR_PTR(r);
-	}
-
-	mutex_lock(&opp_table->lock);
-
-	list_for_each_entry(temp_opp, &opp_table->opp_list, node) {
-		if (temp_opp->available == available &&
-				temp_opp->rate == freq) {
-			opp = temp_opp;
-
-			/* Increment the reference count of OPP */
-			dev_pm_opp_get(opp);
-			break;
-		}
-	}
-
-	mutex_unlock(&opp_table->lock);
-	dev_pm_opp_put_opp_table(opp_table);
-
-	return opp;
+	return _find_key_exact(dev, freq, 0, available, _read_freq);
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_find_freq_exact);
 
 static noinline struct dev_pm_opp *_find_freq_ceil(struct opp_table *opp_table,
 						   unsigned long *freq)
 {
-	struct dev_pm_opp *temp_opp, *opp = ERR_PTR(-ERANGE);
-
-	mutex_lock(&opp_table->lock);
-
-	list_for_each_entry(temp_opp, &opp_table->opp_list, node) {
-		if (temp_opp->available && temp_opp->rate >= *freq) {
-			opp = temp_opp;
-			*freq = opp->rate;
-
-			/* Increment the reference count of OPP */
-			dev_pm_opp_get(opp);
-			break;
-		}
-	}
-
-	mutex_unlock(&opp_table->lock);
-
-	return opp;
+	return _opp_table_find_key_ceil(opp_table, freq, 0, true, _read_freq);
 }
 
 /**
@@ -529,23 +609,7 @@ static noinline struct dev_pm_opp *_find_freq_ceil(struct opp_table *opp_table,
 struct dev_pm_opp *dev_pm_opp_find_freq_ceil(struct device *dev,
 					     unsigned long *freq)
 {
-	struct opp_table *opp_table;
-	struct dev_pm_opp *opp;
-
-	if (!dev || !freq) {
-		dev_err(dev, "%s: Invalid argument freq=%p\n", __func__, freq);
-		return ERR_PTR(-EINVAL);
-	}
-
-	opp_table = _find_opp_table(dev);
-	if (IS_ERR(opp_table))
-		return ERR_CAST(opp_table);
-
-	opp = _find_freq_ceil(opp_table, freq);
-
-	dev_pm_opp_put_opp_table(opp_table);
-
-	return opp;
+	return _find_key_ceil(dev, freq, 0, true, _read_freq);
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_find_freq_ceil);
 
@@ -570,40 +634,7 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_find_freq_ceil);
 struct dev_pm_opp *dev_pm_opp_find_freq_floor(struct device *dev,
 					      unsigned long *freq)
 {
-	struct opp_table *opp_table;
-	struct dev_pm_opp *temp_opp, *opp = ERR_PTR(-ERANGE);
-
-	if (!dev || !freq) {
-		dev_err(dev, "%s: Invalid argument freq=%p\n", __func__, freq);
-		return ERR_PTR(-EINVAL);
-	}
-
-	opp_table = _find_opp_table(dev);
-	if (IS_ERR(opp_table))
-		return ERR_CAST(opp_table);
-
-	mutex_lock(&opp_table->lock);
-
-	list_for_each_entry(temp_opp, &opp_table->opp_list, node) {
-		if (temp_opp->available) {
-			/* go to the next node, before choosing prev */
-			if (temp_opp->rate > *freq)
-				break;
-			else
-				opp = temp_opp;
-		}
-	}
-
-	/* Increment the reference count of OPP */
-	if (!IS_ERR(opp))
-		dev_pm_opp_get(opp);
-	mutex_unlock(&opp_table->lock);
-	dev_pm_opp_put_opp_table(opp_table);
-
-	if (!IS_ERR(opp))
-		*freq = opp->rate;
-
-	return opp;
+	return _find_key_floor(dev, freq, 0, true, _read_freq);
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_find_freq_floor);
 
Signature · 1 line
2.31.1.272.g89b43f80a514
#3 lore raw

PATCH v2 3/4 OPP: Use generic key finding helpers for level key

In reply to Viresh Kumar

Use the recently added generic key findings helpers to find level key values.

---
 drivers/opp/core.c | 63 ++++++++--------------------------------------
 1 file changed, 10 insertions(+), 53 deletions(-)
drivers/opp/core.c +10 -53
index c850b8691ee6..968fdbbc0693 100644
@@ -433,6 +433,11 @@ static unsigned long _read_freq(struct dev_pm_opp *opp, int index)
 	return opp->rate;
 }
 
+static unsigned long _read_level(struct dev_pm_opp *opp, int index)
+{
+	return opp->level;
+}
+
 /* Generic comparison helpers */
 static bool _compare_exact(struct dev_pm_opp **opp, struct dev_pm_opp *temp_opp,
 			   unsigned long opp_key, unsigned long key)
@@ -656,33 +661,7 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_find_freq_floor);
 struct dev_pm_opp *dev_pm_opp_find_level_exact(struct device *dev,
 					       unsigned int level)
 {
-	struct opp_table *opp_table;
-	struct dev_pm_opp *temp_opp, *opp = ERR_PTR(-ERANGE);
-
-	opp_table = _find_opp_table(dev);
-	if (IS_ERR(opp_table)) {
-		int r = PTR_ERR(opp_table);
-
-		dev_err(dev, "%s: OPP table not found (%d)\n", __func__, r);
-		return ERR_PTR(r);
-	}
-
-	mutex_lock(&opp_table->lock);
-
-	list_for_each_entry(temp_opp, &opp_table->opp_list, node) {
-		if (temp_opp->level == level) {
-			opp = temp_opp;
-
-			/* Increment the reference count of OPP */
-			dev_pm_opp_get(opp);
-			break;
-		}
-	}
-
-	mutex_unlock(&opp_table->lock);
-	dev_pm_opp_put_opp_table(opp_table);
-
-	return opp;
+	return _find_key_exact(dev, level, 0, true, _read_level);
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_find_level_exact);
 
@@ -704,33 +683,11 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_find_level_exact);
 struct dev_pm_opp *dev_pm_opp_find_level_ceil(struct device *dev,
 					      unsigned int *level)
 {
-	struct opp_table *opp_table;
-	struct dev_pm_opp *temp_opp, *opp = ERR_PTR(-ERANGE);
-
-	opp_table = _find_opp_table(dev);
-	if (IS_ERR(opp_table)) {
-		int r = PTR_ERR(opp_table);
-
-		dev_err(dev, "%s: OPP table not found (%d)\n", __func__, r);
-		return ERR_PTR(r);
-	}
-
-	mutex_lock(&opp_table->lock);
-
-	list_for_each_entry(temp_opp, &opp_table->opp_list, node) {
-		if (temp_opp->available && temp_opp->level >= *level) {
-			opp = temp_opp;
-			*level = opp->level;
-
-			/* Increment the reference count of OPP */
-			dev_pm_opp_get(opp);
-			break;
-		}
-	}
-
-	mutex_unlock(&opp_table->lock);
-	dev_pm_opp_put_opp_table(opp_table);
+	unsigned long temp = *level;
+	struct dev_pm_opp *opp;
 
+	opp = _find_key_ceil(dev, &temp, 0, true, _read_level);
+	*level = temp;
 	return opp;
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_find_level_ceil);
Signature · 1 line
2.31.1.272.g89b43f80a514
#4 lore raw

PATCH v2 4/4 OPP: Use generic key finding helpers for bandwidth key

In reply to Viresh Kumar

Use the recently added generic key findings helpers to find bandwidth key values.

---
 drivers/opp/core.c | 83 +++++++++-------------------------------------
 1 file changed, 15 insertions(+), 68 deletions(-)
drivers/opp/core.c +15 -68
index 968fdbbc0693..5ad43dbfd87f 100644
@@ -438,6 +438,11 @@ static unsigned long _read_level(struct dev_pm_opp *opp, int index)
 	return opp->level;
 }
 
+static unsigned long _read_bw(struct dev_pm_opp *opp, int index)
+{
+	return opp->bandwidth[index].peak;
+}
+
 /* Generic comparison helpers */
 static bool _compare_exact(struct dev_pm_opp **opp, struct dev_pm_opp *temp_opp,
 			   unsigned long opp_key, unsigned long key)
@@ -711,42 +716,14 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_find_level_ceil);
  * The callers are required to call dev_pm_opp_put() for the returned OPP after
  * use.
  */
-struct dev_pm_opp *dev_pm_opp_find_bw_ceil(struct device *dev,
-					   unsigned int *bw, int index)
+struct dev_pm_opp *dev_pm_opp_find_bw_ceil(struct device *dev, unsigned int *bw,
+					   int index)
 {
-	struct opp_table *opp_table;
-	struct dev_pm_opp *temp_opp, *opp = ERR_PTR(-ERANGE);
-
-	if (!dev || !bw) {
-		dev_err(dev, "%s: Invalid argument bw=%p\n", __func__, bw);
-		return ERR_PTR(-EINVAL);
-	}
-
-	opp_table = _find_opp_table(dev);
-	if (IS_ERR(opp_table))
-		return ERR_CAST(opp_table);
-
-	if (index >= opp_table->path_count)
-		return ERR_PTR(-EINVAL);
-
-	mutex_lock(&opp_table->lock);
-
-	list_for_each_entry(temp_opp, &opp_table->opp_list, node) {
-		if (temp_opp->available && temp_opp->bandwidth) {
-			if (temp_opp->bandwidth[index].peak >= *bw) {
-				opp = temp_opp;
-				*bw = opp->bandwidth[index].peak;
-
-				/* Increment the reference count of OPP */
-				dev_pm_opp_get(opp);
-				break;
-			}
-		}
-	}
-
-	mutex_unlock(&opp_table->lock);
-	dev_pm_opp_put_opp_table(opp_table);
+	unsigned long temp = *bw;
+	struct dev_pm_opp *opp;
 
+	opp = _find_key_ceil(dev, &temp, index, true, _read_bw);
+	*bw = temp;
 	return opp;
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_find_bw_ceil);
@@ -773,41 +750,11 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_find_bw_ceil);
 struct dev_pm_opp *dev_pm_opp_find_bw_floor(struct device *dev,
 					    unsigned int *bw, int index)
 {
-	struct opp_table *opp_table;
-	struct dev_pm_opp *temp_opp, *opp = ERR_PTR(-ERANGE);
-
-	if (!dev || !bw) {
-		dev_err(dev, "%s: Invalid argument bw=%p\n", __func__, bw);
-		return ERR_PTR(-EINVAL);
-	}
-
-	opp_table = _find_opp_table(dev);
-	if (IS_ERR(opp_table))
-		return ERR_CAST(opp_table);
-
-	if (index >= opp_table->path_count)
-		return ERR_PTR(-EINVAL);
-
-	mutex_lock(&opp_table->lock);
-
-	list_for_each_entry(temp_opp, &opp_table->opp_list, node) {
-		if (temp_opp->available && temp_opp->bandwidth) {
-			/* go to the next node, before choosing prev */
-			if (temp_opp->bandwidth[index].peak > *bw)
-				break;
-			opp = temp_opp;
-		}
-	}
-
-	/* Increment the reference count of OPP */
-	if (!IS_ERR(opp))
-		dev_pm_opp_get(opp);
-	mutex_unlock(&opp_table->lock);
-	dev_pm_opp_put_opp_table(opp_table);
-
-	if (!IS_ERR(opp))
-		*bw = opp->bandwidth[index].peak;
+	unsigned long temp = *bw;
+	struct dev_pm_opp *opp;
 
+	opp = _find_key_floor(dev, &temp, index, true, _read_bw);
+	*bw = temp;
 	return opp;
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_find_bw_floor);
Signature · 1 line
2.31.1.272.g89b43f80a514