Skip to contentSkip to conversation

add support for LSM6DSTX

PATCH In review Lorenzo Bianconi 2 participants 4 messages Sep 15, 2022 – Sep 18, 2022

Subsystems (3)
lore
Share & tools
lore

Lorenzo Bianconi

author maintainer
#0 lore raw

cover add support for LSM6DSTX

Add support for LSM6DSTX IMU mems sensor
https://www.st.com/resource/en/datasheet/lsm6dstx.pdf

Lorenzo Bianconi (2):
iio: imu: st_lsm6dsx: add support to LSM6DSTX
dt-bindings: iio: imu: st_lsm6dsx: add lsm6dstx device bindings

 Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml | 3 +++
 drivers/iio/imu/st_lsm6dsx/Kconfig                        | 2 +-
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h                   | 2 ++
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c            | 2 +-
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c              | 7 ++++++-
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c               | 5 +++++
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c               | 5 +++++
 7 files changed, 23 insertions(+), 3 deletions(-)
Signature · 1 line
2.37.3
author maintainer
#1 lore raw

PATCH 1/2 iio: imu: st_lsm6dsx: add support to LSM6DSTX

Add support to STM LSM6DSTX (acc + gyro) Mems sensor. The LSM6DSTX sensor can use LSM6DST as fallback device since it implements all the LSM6DSTX features currently implemented in st_lsm6dsx.

Datasheet: https://www.st.com/resource/en/datasheet/lsm6dstx.pdf

---
 drivers/iio/imu/st_lsm6dsx/Kconfig             | 2 +-
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h        | 2 ++
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 2 +-
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c   | 7 ++++++-
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c    | 5 +++++
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c    | 5 +++++
 6 files changed, 20 insertions(+), 3 deletions(-)
drivers/iio/imu/st_lsm6dsx/Kconfig +1 -1
index fefd0b939100..2ed2b3f40c0b 100644
@@ -12,7 +12,7 @@ config IIO_ST_LSM6DSX
 	  Say yes here to build support for STMicroelectronics LSM6DSx imu
 	  sensor. Supported devices: lsm6ds3, lsm6ds3h, lsm6dsl, lsm6dsm,
 	  ism330dlc, lsm6dso, lsm6dsox, asm330lhh, asm330lhhx, lsm6dsr,
-	  lsm6ds3tr-c, ism330dhcx, lsm6dsrx, lsm6ds0, lsm6dsop,
+	  lsm6ds3tr-c, ism330dhcx, lsm6dsrx, lsm6ds0, lsm6dsop, lsm6dstx,
 	  the accelerometer/gyroscope of lsm9ds1 and lsm6dst.
 
 	  To compile this driver as a module, choose M here: the module
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h +2 -0
index a86dd29a4738..6b57d47be69e 100644
@@ -32,6 +32,7 @@
 #define ST_LSM6DST_DEV_NAME	"lsm6dst"
 #define ST_LSM6DSOP_DEV_NAME	"lsm6dsop"
 #define ST_ASM330LHHX_DEV_NAME	"asm330lhhx"
+#define ST_LSM6DSTX_DEV_NAME	"lsm6dstx"
 
 enum st_lsm6dsx_hw_id {
 	ST_LSM6DS3_ID,
@@ -51,6 +52,7 @@ enum st_lsm6dsx_hw_id {
 	ST_LSM6DST_ID,
 	ST_LSM6DSOP_ID,
 	ST_ASM330LHHX_ID,
+	ST_LSM6DSTX_ID,
 	ST_LSM6DSX_MAX_ID,
 };
 
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c +1 -1
index c7d3730ab1c5..e49f2d120ed3 100644
@@ -15,7 +15,7 @@
  * value of the decimation factor and ODR set for each FIFO data set.
  *
  * LSM6DSO/LSM6DSOX/ASM330LHH/ASM330LHHX/LSM6DSR/LSM6DSRX/ISM330DHCX/
- * LSM6DST/LSM6DSOP:
+ * LSM6DST/LSM6DSOP/LSM6DSTX:
  * The FIFO buffer can be configured to store data from gyroscope and
  * accelerometer. Each sample is queued with a tag (1B) indicating data
  * source (gyroscope, accelerometer, hw timer).
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c +6 -1
index b5e4a4113652..f8bbb005718e 100644
@@ -26,7 +26,8 @@
  *   - Gyroscope supported full-scale [dps]: +-125/+-245/+-500/+-1000/+-2000
  *   - FIFO size: 4KB
  *
- * - LSM6DSO/LSM6DSOX/ASM330LHH/ASM330LHHX/LSM6DSR/ISM330DHCX/LSM6DST/LSM6DSOP:
+ * - LSM6DSO/LSM6DSOX/ASM330LHH/ASM330LHHX/LSM6DSR/ISM330DHCX/LSM6DST/LSM6DSOP/
+ *   LSM6DSTX:
  *   - Accelerometer/Gyroscope supported ODR [Hz]: 12.5, 26, 52, 104, 208, 416,
  *     833
  *   - Accelerometer supported full-scale [g]: +-2/+-4/+-8/+-16
@@ -791,6 +792,10 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.hw_id = ST_ASM330LHHX_ID,
 				.name = ST_ASM330LHHX_DEV_NAME,
 				.wai = 0x6b,
+			}, {
+				.hw_id = ST_LSM6DSTX_ID,
+				.name = ST_LSM6DSTX_DEV_NAME,
+				.wai = 0x6d,
 			},
 		},
 		.channels = {
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c +5 -0
index 2ea34c0d3a8c..307c8c436862 100644
@@ -105,6 +105,10 @@ static const struct of_device_id st_lsm6dsx_i2c_of_match[] = {
 		.compatible = "st,asm330lhhx",
 		.data = (void *)ST_ASM330LHHX_ID,
 	},
+	{
+		.compatible = "st,lsm6dstx",
+		.data = (void *)ST_LSM6DSTX_ID,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, st_lsm6dsx_i2c_of_match);
@@ -127,6 +131,7 @@ static const struct i2c_device_id st_lsm6dsx_i2c_id_table[] = {
 	{ ST_LSM6DST_DEV_NAME, ST_LSM6DST_ID },
 	{ ST_LSM6DSOP_DEV_NAME, ST_LSM6DSOP_ID },
 	{ ST_ASM330LHHX_DEV_NAME, ST_ASM330LHHX_ID },
+	{ ST_LSM6DSTX_DEV_NAME, ST_LSM6DSTX_ID },
 	{},
 };
 MODULE_DEVICE_TABLE(i2c, st_lsm6dsx_i2c_id_table);
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c +5 -0
index 6a8883f022a8..6a4eecf4bb05 100644
@@ -105,6 +105,10 @@ static const struct of_device_id st_lsm6dsx_spi_of_match[] = {
 		.compatible = "st,asm330lhhx",
 		.data = (void *)ST_ASM330LHHX_ID,
 	},
+	{
+		.compatible = "st,lsm6dstx",
+		.data = (void *)ST_LSM6DSTX_ID,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, st_lsm6dsx_spi_of_match);
@@ -127,6 +131,7 @@ static const struct spi_device_id st_lsm6dsx_spi_id_table[] = {
 	{ ST_LSM6DST_DEV_NAME, ST_LSM6DST_ID },
 	{ ST_LSM6DSOP_DEV_NAME, ST_LSM6DSOP_ID },
 	{ ST_ASM330LHHX_DEV_NAME, ST_ASM330LHHX_ID },
+	{ ST_LSM6DSTX_DEV_NAME, ST_LSM6DSTX_ID },
 	{},
 };
 MODULE_DEVICE_TABLE(spi, st_lsm6dsx_spi_id_table);
Signature · 1 line
2.37.3
author maintainer
#2 lore raw

PATCH 2/2 dt-bindings: iio: imu: st_lsm6dsx: add lsm6dstx device bindings

In reply to Lorenzo Bianconi

Add device bindings for lsm6dstx IMU sensor.
Use lsm6dst as fallback device for lsm6dstx since it implements all the features currently supported by lsm6dstx.

---
 Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml | 3 +++
 1 file changed, 3 insertions(+)
Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml +3 -0
index 0ceb29fb01b7..fe1e02e5d7b3 100644
@@ -35,6 +35,9 @@ properties:
       - items:
           - const: st,asm330lhhx
           - const: st,lsm6dsr
+      - items:
+          - const: st,lsm6dstx
+          - const: st,lsm6dst
 
   reg:
     maxItems: 1
Signature · 1 line
2.37.3
maintainer
#3 lore raw
In reply to Lorenzo Bianconi
Quoted 2 lines · On Thu, 15 Sep 2022 19:34:58 +0200 Lorenzo Bianconi <[email protected]> wrote:

Add support for LSM6DSTX IMU mems sensor
https://www.st.com/resource/en/datasheet/lsm6dstx.pdf

Looks trivial enough that I've queued it up on my togreg branch and pushed out as testing for 0-day to take a look.

I will be rebasing that tree shortly for other reasons, so a bit of time for reviews to still come in before this hits a non rebasing tree.

Thanks,

Jonathan

Quoted 14 lines

Lorenzo Bianconi (2):
iio: imu: st_lsm6dsx: add support to LSM6DSTX
dt-bindings: iio: imu: st_lsm6dsx: add lsm6dstx device bindings

 Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml | 3 +++
 drivers/iio/imu/st_lsm6dsx/Kconfig                        | 2 +-
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h                   | 2 ++
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c            | 2 +-
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c              | 7 ++++++-
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c               | 5 +++++
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c               | 5 +++++
 7 files changed, 23 insertions(+), 3 deletions(-)