arm64: dts: renesas: r8a779g0: Add remaining (H)SCIF nodes
Subsystems (2)
Geert Uytterhoeven
maintainerv2 cover arm64: dts: renesas: r8a779g0: Add remaining (H)SCIF nodes
Hi all,
This patch series adds devices nodes for the remaining Serial and High Speed Serial Communication Interfaces with FIFO ((H)SCIF) on the Renesas R-Car V4H (R8A779G0) SoC.
Changes compared to v1[1]:
- Replace S0D3_PER by SASYNCPERD1, as per R-Car V4H Hardware User's
Manual rev. 0.54.
SCIF[134] and HSCIF[13] can be accessed on expansion connectors on the White Hawk BreatOut Board using DT overlays available from [2]. They have been tested with a logic analyzer (to verify clocking) and with external loopback.
I plan to queues this series in renesas-devel for v6.2. Thanks for your comments!
[1] https://lore.kernel.org/r/[email protected]
[2] https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git/log/?h=topic/renesas-overlays
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
Geert Uytterhoeven
maintainerPATCH v2 1/2 arm64: dts: renesas: r8a779g0: Add SCIF nodes
Add device nodes for the Serial Communication Interfaces with FIFO (SCIF) on the Renesas R-Car V4H (R8A779G0) SoC, including DMA support.
Based on patches in the BSP by Takeshi Kihara and Vinh Nguyen.
---
v2:
- Replace S0D3_PER by SASYNCPERD1, as per R-Car V4H Hardware User's
Manual rev. 0.54. --- arch/arm64/boot/dts/renesas/r8a779g0.dtsi | 68 +++++++++++++++++++++++ 1 file changed, 68 insertions(+)
arch/arm64/boot/dts/renesas/r8a779g0.dtsi +68 -0
@@ -512,6 +512,74 @@ avb2: ethernet@e6820000 { status = "disabled"; }; + scif0: serial@e6e60000 { + compatible = "renesas,scif-r8a779g0", + "renesas,rcar-gen4-scif", "renesas,scif"; + reg = <0 0xe6e60000 0 0x64>; + interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 702>, + <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x51>, <&dmac0 0x50>, + <&dmac1 0x51>, <&dmac1 0x50>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 702>; + status = "disabled"; + }; + + scif1: serial@e6e68000 { + compatible = "renesas,scif-r8a779g0", + "renesas,rcar-gen4-scif", "renesas,scif"; + reg = <0 0xe6e68000 0 0x64>; + interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>, + <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x53>, <&dmac0 0x52>, + <&dmac1 0x53>, <&dmac1 0x52>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 703>; + status = "disabled"; + }; + + scif3: serial@e6c50000 { + compatible = "renesas,scif-r8a779g0", + "renesas,rcar-gen4-scif", "renesas,scif"; + reg = <0 0xe6c50000 0 0x64>; + interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 704>, + <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x57>, <&dmac0 0x56>, + <&dmac1 0x57>, <&dmac1 0x56>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 704>; + status = "disabled"; + }; + + scif4: serial@e6c40000 { + compatible = "renesas,scif-r8a779g0", + "renesas,rcar-gen4-scif", "renesas,scif"; + reg = <0 0xe6c40000 0 0x64>; + interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 705>, + <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x59>, <&dmac0 0x58>, + <&dmac1 0x59>, <&dmac1 0x58>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 705>; + status = "disabled"; + }; + msiof0: spi@e6e90000 { compatible = "renesas,msiof-r8a779g0", "renesas,rcar-gen4-msiof";
Signature · 1 line
2.25.1
Re: [PATCH v2 1/2] arm64: dts: renesas: r8a779g0: Add SCIF nodes
arch/arm64/boot/dts/renesas/r8a779g0.dtsi avb2: ethernet@e6820000 { · line 518
Quoted 2 lines
arch/arm64/boot/dts/renesas/r8a779g0.dtsi +1
-0+ reg = <0 0xe6e60000 0 0x64>;
"64" not "0x64", I think. Or we convert all Gen3+ to "0x40"?
Re: [PATCH v2 1/2] arm64: dts: renesas: r8a779g0: Add SCIF nodes
Hi Wolfram,
Quoted 3 lines · Wolfram Sang
Quoted 1 line
+ reg = <0
0xe6e6000000x64>;"64" not "
0x64", I think. Or we convert all Gen3+ to "0x40"?
Thanks, will go for 64.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
Geert Uytterhoeven
maintainerPATCH v2 2/2 arm64: dts: renesas: r8a779g0: Add remaining HSCIF nodes
In reply to Geert UytterhoevenAdd device nodes for the remaining High Speed Serial Communication Interfaces with FIFO (HSCIF) on the Renesas R-Car V4H (R8A779G0) SoC, including DMA support.
Reformat the existing HSCIF0 node for consistency.
Based on patches in the BSP by Takeshi Kihara and Vinh Nguyen.
---
v2:
- Replace S0D3_PER by SASYNCPERD1, as per R-Car V4H Hardware User's
Manual rev. 0.54. --- arch/arm64/boot/dts/renesas/r8a779g0.dtsi | 56 +++++++++++++++++++++-- 1 file changed, 53 insertions(+), 3 deletions(-)
arch/arm64/boot/dts/renesas/r8a779g0.dtsi +53 -3
@@ -355,9 +355,8 @@ i2c5: i2c@e66e0000 { hscif0: serial@e6540000 { compatible = "renesas,hscif-r8a779g0", - "renesas,rcar-gen4-hscif", - "renesas,hscif"; - reg = <0 0xe6540000 0 96>; + "renesas,rcar-gen4-hscif", "renesas,hscif"; + reg = <0 0xe6540000 0 0x60>; interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 514>, <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>,
@@ -371,6 +370,57 @@ hscif0: serial@e6540000 { status = "disabled"; }; + hscif1: serial@e6550000 { + compatible = "renesas,hscif-r8a779g0", + "renesas,rcar-gen4-hscif", "renesas,hscif"; + reg = <0 0xe6550000 0 0x60>; + interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 515>, + <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x33>, <&dmac0 0x32>, + <&dmac1 0x33>, <&dmac1 0x32>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 515>; + status = "disabled"; + }; + + hscif2: serial@e6560000 { + compatible = "renesas,hscif-r8a779g0", + "renesas,rcar-gen4-hscif", "renesas,hscif"; + reg = <0 0xe6560000 0 0x60>; + interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 516>, + <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x35>, <&dmac0 0x34>, + <&dmac1 0x35>, <&dmac1 0x34>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 516>; + status = "disabled"; + }; + + hscif3: serial@e66a0000 { + compatible = "renesas,hscif-r8a779g0", + "renesas,rcar-gen4-hscif", "renesas,hscif"; + reg = <0 0xe66a0000 0 0x60>; + interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 517>, + <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x37>, <&dmac0 0x36>, + <&dmac1 0x37>, <&dmac1 0x36>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 517>; + status = "disabled"; + }; + avb0: ethernet@e6800000 { compatible = "renesas,etheravb-r8a779g0", "renesas,etheravb-rcar-gen4";
Signature · 1 line
2.25.1