Staging: greybus: Code style cleanup
Subsystems (5)
v3 cover Staging: greybus: Code style cleanup
These two patches address some Errors, Warnings, and Checks reported by ./scripts/checkpatch.pl
v1 -> v2
Separates the patch into a small patchset with the delimitation of syntactical styling vs whitespace styling. (I plan on sending to the maintainers if Outreach thinks this is an appropriate patch.)
v2 -> v3
CCs maintainers.
I now know I should have CCed the maintainers from v1. I apologise for my error.
Hunter Chasens (2):
Staging: greybus: Whitespace cleanup
Staging: greybus: Removes redundant 'int'
.../Documentation/firmware/authenticate.c | 4 +-- .../greybus/Documentation/firmware/firmware.c | 34 +++++++++---------- drivers/staging/greybus/arche-platform.c | 2 +- .../staging/greybus/greybus_authentication.h | 1 - drivers/staging/greybus/loopback.c | 3 +- drivers/staging/greybus/tools/loopback_test.c | 16 +-------- 6 files changed, 22 insertions(+), 38 deletions(-)
Signature · 1 line
2.38.1
PATCH v3 1/2 Staging: greybus: Whitespace cleanup
Modifies whitespace to better come into compliance with the kernel's coding style.
--- .../Documentation/firmware/authenticate.c | 2 +- .../greybus/Documentation/firmware/firmware.c | 34 +++++++++---------- drivers/staging/greybus/arche-platform.c | 2 +- .../staging/greybus/greybus_authentication.h | 1 - drivers/staging/greybus/loopback.c | 3 +- drivers/staging/greybus/tools/loopback_test.c | 16 +-------- 6 files changed, 21 insertions(+), 37 deletions(-)
drivers/staging/greybus/Documentation/firmware/authenticate.c +1 -1
@@ -85,7 +85,7 @@ int main(int argc, char *argv[]) }printf ("Authenticated, result (%02x), sig-size (%02x)\n" , - authenticate.result_code, authenticate.signature_size); + authenticate.result_code, authenticate.signature_size); close_fd:close (fd);
drivers/staging/greybus/Documentation/firmware/firmware.c +17 -17
@@ -47,13 +47,13 @@ static int update_intf_firmware(int fd) ret =ioctl (fd,FW_MGMT_IOC_GET_INTF_FW , &intf_fw_info);if (ret <0 ) {printf ("Failed to get interface firmware version: %s (%d)\n" , - fwdev, ret); + fwdev, ret);return -1 ; }printf ("Interface Firmware tag (%s), major (%d), minor (%d)\n" , - intf_fw_info.firmware_tag, intf_fw_info.major, - intf_fw_info.minor); + intf_fw_info.firmware_tag, intf_fw_info.major, + intf_fw_info.minor);/* Try Interface Firmware load over Unipro */ printf ("Loading Interface Firmware\n" );
@@ -69,20 +69,20 @@ static int update_intf_firmware(int fd) ret =ioctl (fd,FW_MGMT_IOC_INTF_LOAD_AND_VALIDATE , &intf_load);if (ret <0 ) {printf ("Failed to load interface firmware: %s (%d)\n" , fwdev, - ret); + ret);return -1 ; }if (intf_load.status !=GB_FW_U_LOAD_STATUS_VALIDATED && intf_load.status !=GB_FW_U_LOAD_STATUS_UNVALIDATED ) {printf ("Load status says loading failed: %d\n" , - intf_load.status); + intf_load.status);return -1 ; }printf ("Interface Firmware (%s) Load done: major: %d, minor: %d, status: %d\n" , - firmware_tag, intf_load.major, intf_load.minor, - intf_load.status); + firmware_tag, intf_load.major, intf_load.minor, + intf_load.status);/* Initiate Mode-switch to the newly loaded firmware */ printf ("Initiate Mode switch\n" );
@@ -108,21 +108,21 @@ static int update_backend_firmware(int fd) ret =ioctl (fd,FW_MGMT_IOC_GET_BACKEND_FW , &backend_fw_info);if (ret <0 ) {printf ("Failed to get backend firmware version: %s (%d)\n" , - fwdev, ret); + fwdev, ret);return -1 ; }printf ("Backend Firmware tag (%s), major (%d), minor (%d), status (%d)\n" , - backend_fw_info.firmware_tag, backend_fw_info.major, - backend_fw_info.minor, backend_fw_info.status); + backend_fw_info.firmware_tag, backend_fw_info.major, + backend_fw_info.minor, backend_fw_info.status);if (backend_fw_info.status ==GB_FW_U_BACKEND_VERSION_STATUS_RETRY ) goto retry_fw_version; -if ((backend_fw_info.status !=GB_FW_U_BACKEND_VERSION_STATUS_SUCCESS ) - && (backend_fw_info.status !=GB_FW_U_BACKEND_VERSION_STATUS_NOT_AVAILABLE )) { +if ((backend_fw_info.status !=GB_FW_U_BACKEND_VERSION_STATUS_SUCCESS ) && + (backend_fw_info.status !=GB_FW_U_BACKEND_VERSION_STATUS_NOT_AVAILABLE )) {printf ("Failed to get backend firmware version: %s (%d)\n" , - fwdev, backend_fw_info.status); + fwdev, backend_fw_info.status);return -1 ; }
@@ -148,10 +148,10 @@ static int update_backend_firmware(int fd)if (backend_update.status !=GB_FW_U_BACKEND_FW_STATUS_SUCCESS ) {printf ("Load status says loading failed: %d\n" , - backend_update.status); + backend_update.status); }else {printf ("Backend Firmware (%s) Load done: status: %d\n" , - firmware_tag, backend_update.status); + firmware_tag, backend_update.status); }return 0 ;
@@ -185,8 +185,8 @@ int main(int argc, char *argv[]) fw_timeout =strtoul (argv[4 ], &endptr,10 );printf ("Trying Firmware update: fwdev: %s, type: %s, tag: %s, timeout: %u\n" , - fwdev, fw_update_type ==0 ?"interface" :"backend" , - firmware_tag, fw_timeout); + fwdev, fw_update_type ==0 ?"interface" :"backend" , + firmware_tag, fw_timeout);printf ("Opening %s firmware management device\n" , fwdev);
drivers/staging/greybus/arche-platform.c +1 -1
@@ -179,7 +179,7 @@ static irqreturn_t arche_platform_wd_irq(int irq, void *devid)if (arche_pdata->wake_detect_state !=WD_STATE_COLDBOOT_START ) {arche_platform_set_wake_detect_state (arche_pdata, -WD_STATE_COLDBOOT_TRIG ); +WD_STATE_COLDBOOT_TRIG );spin_unlock_irqrestore (&arche_pdata->wake_lock, flags);return IRQ_WAKE_THREAD ;
drivers/staging/greybus/greybus_authentication.h +0 -1
@@ -41,7 +41,6 @@#define CAP_AUTH_RESULT_CR_NO_KEY 0x03#define CAP_AUTH_RESULT_CR_SIG_FAIL 0x04 -/* IOCTL support */ struct cap_ioc_get_endpoint_uid {__u8 uid[8 ];
drivers/staging/greybus/loopback.c +1 -2
@@ -588,8 +588,7 @@ static int gb_loopback_async_sink(struct gb_loopback *gb, u32 len)return retval; } -static int gb_loopback_async_transfer_complete ( -struct gb_loopback_async_operation *op_async) +static int gb_loopback_async_transfer_complete (struct gb_loopback_async_operation *op_async) {struct gb_loopback *gb;struct gb_operation *operation;
drivers/staging/greybus/tools/loopback_test.c +1 -15
@@ -240,8 +240,6 @@ static void show_loopback_devices(struct loopback_test *t)for (i =0 ; i < t->device_count; i++)printf ("device[%d] = %s\n" , i, t->devices[i].name); -} -int open_sysfs (const char *sys_pfx,const char *node,int flags) {int fd;
@@ -274,7 +272,6 @@ float read_sysfs_float_fd(int fd, const char *sys_pfx, const char *node)char buf[SYSFS_MAX_INT ];if (read (fd, buf,sizeof (buf)) <0 ) { -fprintf (stderr,"unable to read from %s%s %s\n" , sys_pfx, node,strerror (errno));close (fd);
@@ -367,7 +364,6 @@ static int get_results(struct loopback_test *t) r->apbridge_unipro_latency_max - r->apbridge_unipro_latency_min; r->gbphy_firmware_latency_jitter = r->gbphy_firmware_latency_max - r->gbphy_firmware_latency_min; - }/*calculate the aggregate results of all enabled devices */
@@ -407,9 +403,7 @@ static int get_results(struct loopback_test *t) r->apbridge_unipro_latency_max - r->apbridge_unipro_latency_min; r->gbphy_firmware_latency_jitter = r->gbphy_firmware_latency_max - r->gbphy_firmware_latency_min; - } -return 0 ; }
@@ -537,7 +531,6 @@ static int log_results(struct loopback_test *t)abort (); } - }for (i =0 ; i < t->device_count; i++) {if (!device_enabled (t, i))continue ;
@@ -550,10 +543,8 @@ static int log_results(struct loopback_test *t)if (ret ==-1 )fprintf (stderr,"unable to write %d bytes to csv.\n" , len); } - } -if (t->aggregate_output) { len =format_output (t, &t->aggregate_results,"aggregate" , data,sizeof (data), &tm);
@@ -680,6 +671,7 @@ static int close_poll_files(struct loopback_test *t)return 0 ; } +static int is_complete (struct loopback_test *t) {int iteration_count;
@@ -740,7 +732,6 @@ static int wait_for_complete(struct loopback_test *t) ts = &t->poll_timeout;while (1 ) { - ret =ppoll (t->fds, t->poll_count, ts, &mask_old);if (ret <=0 ) {stop_tests (t);
@@ -780,7 +771,6 @@ static void prepare_devices(struct loopback_test *t)if (t->stop_all ||device_enabled (t, i))write_sysfs_val (t->devices[i].sysfs_entry,"type" ,0 ); -for (i =0 ; i < t->device_count; i++) {if (!device_enabled (t, i))continue ;
@@ -823,7 +813,6 @@ static int start(struct loopback_test *t)return 0 ; } -void loopback_run (struct loopback_test *t) {int i;
@@ -852,7 +841,6 @@ void loopback_run(struct loopback_test *t)if (ret) goto err; -get_results (t);log_results (t);
@@ -881,10 +869,8 @@ static int sanity_check(struct loopback_test *t)fprintf (stderr,"Bad device mask %x\n" , (1 << i));return -1 ; } - } -return 0 ; }
Signature · 1 line
2.38.1
Re: [PATCH v3 1/2] Staging: greybus: Whitespace cleanup
drivers/staging/greybus/arche-platform.c static irqreturn_t arche_platform_wd_irq(int irq, void *devid) · line 182
Quoted 10 lines · Hunter Chasens
drivers/staging/greybus/arche-platform.c +1
-1@@ -179,7 +179,7 @@ static irqreturn_t arche_platform_wd_irq(int irq, void *devid)if (arche_pdata->wake_detect_state !=WD_STATE_COLDBOOT_START ) {arche_platform_set_wake_detect_state (arche_pdata, -WD_STATE_COLDBOOT_TRIG ); +WD_STATE_COLDBOOT_TRIG );
This looks incorrect, 'W' should be right below 'a' here, isn't it ?
drivers/staging/greybus/greybus_authentication.h line 44
Quoted 12 lines
drivers/staging/greybus/arche-platform.c +0
-0spin_unlock_irqrestore (&arche_pdata->wake_lock, flags);return IRQ_WAKE_THREAD ;drivers/staging/greybus/greybus_authentication.h +0
-1@@ -41,7 +41,6 @@#define CAP_AUTH_RESULT_CR_NO_KEY 0x03#define CAP_AUTH_RESULT_CR_SIG_FAIL 0x04 -
This was intentionally left here I believe.
drivers/staging/greybus/tools/loopback_test.c static void show_loopback_devices(struct loopback_test *t) · line 244
Quoted 11 lines
drivers/staging/greybus/greybus_authentication.h +0
-0/* IOCTL support */ drivers/staging/greybus/tools/loopback_test.c +0
-2@@ -240,8 +240,6 @@ static void show_loopback_devices(struct loopback_test *t)for (i =0 ; i < t->device_count; i++)printf ("device[%d] = %s\n" , i, t->devices[i].name); -} -
This looks strange.
drivers/staging/greybus/tools/loopback_test.c static int log_results(struct loopback_test *t) · line 540
Quoted 5 lines
drivers/staging/greybus/tools/loopback_test.c +0
-1@@ -537,7 +531,6 @@ static int log_results(struct loopback_test *t)abort (); } - }
This too..
Signature · 1 line
viresh
Greg KH
maintainerRe: [PATCH v3 1/2] Staging: greybus: Whitespace cleanup
In reply to Hunter ChasensQuoted 12 lines · Hunter Chasens
Modifies whitespace to better come into compliance with the kernel's coding style.
Signed-off-by Hunter Chasens <[email protected]>--- .../Documentation/firmware/authenticate.c | 2 +- .../greybus/Documentation/firmware/firmware.c | 34 +++++++++---------- drivers/staging/greybus/arche-platform.c | 2 +- .../staging/greybus/greybus_authentication.h | 1 - drivers/staging/greybus/loopback.c | 3 +- drivers/staging/greybus/tools/loopback_test.c | 16 +-------- 6 files changed, 21 insertions(+), 37 deletions(-)
Hi,
This is the friendly patch-bot of Greg Kroah-Hartman. You have sent him a patch that has triggered this response. He used to manually respond to these common problems, but in order to save his sanity (he kept writing the same thing over and over, yet to different people), I was created. Hopefully you will not take offence and will fix the problem in your patch and resubmit it so that it can be accepted into the Linux kernel tree.
You are receiving this message because of the following common error(s) as indicated below:
- Your patch did many different things all at once, making it difficult to review. All Linux kernel patches need to only do one thing at a time. If you need to do multiple things (such as clean up all coding style issues in a file/driver), do it in a sequence of patches, each one doing only one thing. This will make it easier to review the patches to ensure that they are correct, and to help alleviate any merge issues that larger patches can cause.
- You did not specify a description of why the patch is needed, or possibly, any description at all, in the email body. Please read the section entitled "The canonical patch format" in the kernel file, Documentation/SubmittingPatches for what is needed in order to properly describe the change.
- You did not write a descriptive Subject: for the patch, allowing Greg, and everyone else, to know what this patch is all about. Please read the section entitled "The canonical patch format" in the kernel file, Documentation/SubmittingPatches for what a proper Subject: line should look like.
If you wish to discuss this problem further, or you have questions about how to resolve this issue, please feel free to respond to this email and Greg will reply once he has dug out from the pending patches received from other developers.
thanks,
greg k-h's patch email bot
PATCH v3 2/2 Staging: greybus: Removes redundant 'int'
In reply to Hunter ChasensRemoves redundant 'int' from phrase unsigned long long int.
--- drivers/staging/greybus/Documentation/firmware/authenticate.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/staging/greybus/Documentation/firmware/authenticate.c +1 -1
@@ -58,7 +58,7 @@ int main(int argc, char *argv[]) goto close_fd; } -printf ("UID received: 0x%llx\n" , *(unsigned long long int *)(uid.uid)); +printf ("UID received: 0x%llx\n" , *(unsigned long long *)(uid.uid));/* Get certificate */ printf ("Get IMS certificate\n" );
Signature · 1 line
2.38.1
Greg KH
maintainerRe: [PATCH v3 2/2] Staging: greybus: Removes redundant 'int'
Quoted 1 line · Hunter Chasens
Removes redundant 'int' from phrase
unsigned long long int.
Why is it redundant? This says what you did, but not _WHY_ you are doing it.
Also you forgot to cc: the proper public mailing lists that scripts/get_maintainer.pl will ask you to cc: Without that, I can not take your patches no matter how good they are.
thanks,
greg k-h